Search Results

Search found 42468 results on 1699 pages for 'default program'.

Page 42/1699 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• How do you export or release a Mac OS X program made in Xcode? Program does not load on other comput

  - by SolidSnake4444

  I made a program in Xcode, being a simple calculator that takes a first number, and a second number, and then either adds,subtracts,multiplies, or divides depending on the radio button. I build and run and the program comes up and works fine. When I went to show my friends on their macs, when you double click on the program the program pops in the tray for like .05 seconds and then disappears and we never can actually run the program. It still works perfect however on my computer. What am I doing wrong? How can I take the program I made, and run it on different macs? I have the release set to 10.5 but the active SDK to 10.6. It runs in both 10.5 and 10.6 simulators. One friend has 10.6.3 like me and the other has 10.5.x(cant remember the last part). To get the app, I changed from debug to release and set active SDK to 10.5. Then in the release folder I found the app and sent that over iChat. I feel this will be a problem in the future if I ever make a legit application to distribute. Thank you!

  Read the article

• Decompiling an old Program

  - by Pedro Laranjeiro

  Hi. I have been asked to update a program written in 1987 in Delphi (I guess). I have no documentation about this program only a few side notes the programmer took that don't make too much sense to make. The cd show this files: Size | Filename - 19956 VP.DTA - 142300 VP.LEX - 404 VP.NDX - 126502 VP.RCS - 131016 VP.SCR - 150067 VP.XEL - 101791 vp.exe Is anyone of this files a database? If so can I access it's data? I tried several code decompilers but they show a message saying it was not a Win32 compatible application. The program run in MS-DOS. Is it possible to obtain the source code? Can I use this code in any way to build a new application? Thanks Update01: I can run the program in MSDOS. The program conjugate verbs and shows an example sentence where the verb can be used. The GUI is a little bit confusing and there is no help menu so I can't see all the capabilities of the program.

  Read the article

• Dealing With Java Default Level Access Specifiers

  - by Tom Tresansky

  I've seen some code in a project recently where some fields in a couple classes have been using the default access modifier without good reason to. It almost looks like a case of "oops, forgot to make these private". Since the classes are used almost exclusively outside of the package they are defined in, the fields are not visible from the calling code, and are treated as private. So the mistake/oversight would not be very noticeable. However, encapsulation is broken. If I wanted to add a new class to the existing package, I could then mess with internal data in objects using fields with default access. So, my questions: Are there any best practices concerning default access specifiers that I should be aware of? Anything that would help prevent this type of accident from re-occurring? Are are any annotations which might say something to the effect of "I really meant for these to be default access"? Using CheckStyle, or any other Eclipse plugins, is there any way to flag instances of default fields, or disallow any not accompanied by, say, a "//default access" comment trailing them?

  Read the article

• ServiceStack razor default page

  - by Tom

  Say I have 2 pages /NotADefault.cshtml /Views/Default.cshtml Question 1. Now I run it, page A always gets called implicitly as start-up default page no matter what I name it. Page B will only be called when I explicitly call localhost/View/Default. How do I make page B (the one in View folder) my default page? Question 2. I also have NotADefaultService.cs and DefaultService.cs. I give each page a Service class at the back. However, when page A is called NotADefaultService.cs never gets called. Only DefaultService.cs gets called when page B is called... My observation is that only the pages in the View folder will get their back-end service class working. Outside of View folder it doesn't work. Combining Q1 and Q2. How do I: Option 1. get the backend service class working under / root outside "View" folder? OR Option 2. appoint /View/Default.schtml as my default at start-up where the service class can be hit?

  Read the article

• Windows Server 2008R2 - can't change or remove the default gateway

  - by disserman

  We've installed VMWare Server 2.0 on Windows 2008R2. After some time playing with it (actually only removing host-only and nat networks, and binding adapters to the specified vmnets) we've noticed a strange problem: if you change or remove the default gateway on the network card, the server completely loses a network connection you can't ping it from the subnet, it also can't connect to anyone. When the gateway is removed and a server tries to connect to the other machines, I can see some incoming packets using a sniffer, but I believe they are damaged in some kind (I'm not a mega-guru in TCP/IP and can't find a mistake in a binary translation of the packet) because the other side doesn't respond. What we tried: removed vmware server using add/remove programs deleted everything related to the vmware server and all installed network adapters in the windows registry double checked for the vmware bridged protocol driver file, it's physically absent and no any links in the registry. performed a tcp/ip reset with netsh and disabled/enabled all network adapters in the device manager to recreate a registry keys for them. tried another network adapter. and the situation is the same: as soon you remove or change the default gateway, windows stops working. The total absurd of the situation is that the default gateway points to the non-existing IP. But when it's set, you can ping a server from the subnet, when you remove it - you can't. Any help? I'm starting thinking the new build of the VMWare Server is some kind of the malware... :)

  Read the article

• How can I erase the traces of Folder Redirection from the Default Domain Policy

  - by bruor

  I've taken over from an IT outsourcer and have found a struggle now that we're starting a migration to windows 7. Someone decided that they would setup Folder redirection in the Default Domain Policy. I've since configured redirection in another policy at an OU level. No matter what I do, the windows 7 systems pick up the Default Domain Policy folder redirection settings only. I keep getting entries in the event log showing that the previously redirected folders "need to be redirected" with a status of 0x80000004. From what I can tell this just means that it's redirecting them locally. Is there a way I can wipe that section of the GPO clean so it's no longer there? I'm hesitant to try to reset the default domain policy to complete defaults. ***UPDATE 6-26 I found that the following condition occurred and was causing the grief here. I've already implemented the new policies for clients, and for some reason, XP was working great, 7 was refusing to process. The DDP was enforced. Because of this, and the fact that the folder redirection policies were set to redirect back to the local profile upon removal, it was forcing clients to pick up it's "redirect to local" settings. Requirements for to recreate the issue. -Create a new test OU and policy. -Create some folder redirection settings, set them to redirect to local upon removal -Remove settings on that GPO -Refresh your view of the GPO and check the settings. -You'll notice that the settings show "not configured" entries for folder redirection. -Enforce this GPO -Create another sub-OU -Create a GPO linked to this sub-ou and configure some folder redirection settings. -Watch as the enforced GPOs "not configured" setting overrides the policy you just defined. I've had to relink the DDP to all OU's that have "block inheritance" enabled, and disable the "enforced" option on the DDP as a workaround. I'd love to re-enable enforcement of the DDP, but until I can erase the traces of folder redirection settings from the DDP, I think I'm stuck.

  Read the article

• Change programfiles variable on windows

  - by Fire-Dragon-DoL

  I have built a computer for a user that asked me for "speed": an SSD was the obvious solution because what he means by speed is "fast boot time". This solved the problem, however the user is not smart enough to remember that he must install programs on D rather than C (c is the ssd, D is an raid 1 hdd). The only solution that comes in my mind is changing programfiles variable such that will point to D rather than C by default. Otherwise, other solutions are ok but I really can't find anything else at the moment. Does anyone have recommendations for how to accomplish changing the default installation directory in Windows?

  Read the article

• Failed to mount to nfs server with "Program not Registered"

  - by Farrel

  I'm trying to setup nfs server on Fedora 17 and I'm getting "Program not Registered" error when I'm trying to mount. I guess the main reason for this is rpcbind. I'm a newbie in linux, so I don't know what info should I provide you with. Here is some info that might be useful. rpcinfo -p program vers proto port service 100000 4 tcp 111 portmapper 100000 3 tcp 111 portmapper 100000 2 tcp 111 portmapper 100000 4 udp 111 portmapper 100000 3 udp 111 portmapper 100000 2 udp 111 portmapper 100005 1 udp 20048 mountd 100005 1 tcp 20048 mountd 100005 2 udp 20048 mountd 100005 2 tcp 20048 mountd 100005 3 udp 20048 mountd 100005 3 tcp 20048 mountd 100024 1 udp 42223 status 100024 1 tcp 50054 status cat /etc/exports /home/Farrel/prog 192.168.xxx.xxx (ro,sync) service nfs status Redirecting to /bin/systemctl status nfs.service nfs-server.service - NFS Server Loaded: loaded (/usr/lib/systemd/system/nfs-server.service; enabled) Active: active (exited) since Fri, 02 Nov 2012 09:29:04 +0300; 5min ago Process: 924 ExecStartPost=/usr/lib/nfs-utils/scripts/nfs-server.postconfig (code=exited, status=0/SUCCESS) Process: 909 ExecStart=/usr/sbin/rpc.nfsd $RPCNFSDARGS ${RPCNFSDCOUNT} (code=exited, status=0/SUCCESS) Process: 885 ExecStartPre=/usr/sbin/exportfs -r (code=exited, status=0/SUCCESS) Process: 864 ExecStartPre=/usr/lib/nfs-utils/scripts/nfs-server.preconfig (code=exited, status=0/SUCCESS) CGroup: name=systemd:/system/nfs-server.service Warning: Journal has been rotated since unit was started. Log output is incomplete or unavailable. Firewall is disabled on both systems. I spent a lot of time reading on the topic but all manuals on setting up nfs server lead to "Program not Registered" error. Any how-to-fix-it ideas?

  Read the article

• Hiding a Website from Search Engine Bots and Viewers by Disabling Default VirtualHost

  - by Basel Shishani

  When staging a website on a remote VPS, we would like it to be accessible to team members only, and we would also like to keep the search engine bots off until the site is finalized. Access control by host whether in Iptables or Apache is not desirable, as accessing hosts can vary. After some reading in Apache config and other SF postings, I settled on the following design that relies on restricting access to only through specific domain names: Default virtual host would be disabled in Apache config as follows - relying on Apache behavior to use first virtual host for site default: <VirtualHost *:80> # Anything matching this should be silently ignored. </VirtualHost> <VirtualHost *:80> ServerName secretsiteone.com DocumentRoot /var/www/secretsiteone.com </VirtualHost> <VirtualHost *:80> ServerName secretsitetwo.com ... </VirtualHost> Then each team member can add the domain names in their local /etc/hosts: xx.xx.xx.xx secrethostone.com My question is: is the above technique good enough to achieve the above said goals esp restricting SE bots, or is it possible that bots would work around that. Note: I understand that mod_rewrite rules con be used to achieve a similar effect as discussed here: How to disable default VirtualHost in apache2?, so the same question would apply to that technique too. Also please note: the content is not highly secretive - the idea is not to devise something that is hack proof, so we are not concerned about traffic interception or the like. The idea is to keep competitors and casual surfers from viewing the content before it's released, and to prevent SE bots from indexing it.

  Read the article

• how to properly set environment variables

  - by avorum

  I've recently started using Windows (having used Ubuntu up until now) and I find myself unable to properly set environment variables. Whenever I set them they don't seem to work. I've been going to Start-Edit Environment Variables for your Account and editing the PATH value in the upper half of the GUI. Here's what I've got so far. ;C:\Chocolatey\bin;C:\tools\mysql\current\bin;C:\Program Files (x86)\Git\bin;C:\Program Files\MySQL\MySQL Server 5.6\bin\;C:\Python33\Scripts; These are each the parent directories of the executables I'd like to be able to run by name from CMD, but mysql, git, and pip aren't being recognized. Am I doing something wrong syntactically or at a general understanding level? I'd like to be able to run these commands without having to specify the full path to the executables every time. EDIT: The full PATH extracted from CMD PATH=C:\Python33\;C:\Program Files (x86)\NVIDIA Corporation\PhysX\Common;C:\Program Files (x86)\AMD APP\bin\x86_64;C:\Program Files (x86)\AMD APP\bin\x86;C:\Program Files\Common Files\Microsoft Shared\Windows Live;C:\Program Files (x86)\Common Files\Microsoft Shared\Windows Live;C:\Windows\system32;C:\Windows;C:\Windows\System32\Wbem;C:\Windows\System32\WindowsPowerShell\v1.0\;C:\Program Files (x86)\GTK2-Runtime\bin;C:\Program Files\WIDCOMM\Bluetooth Software\;C:\Program Files\WIDCOMM\Bluetooth Software\syswow64;C:\Program Files (x86)\ATI Technologies\ATI.ACE\Core-Static;C:\Program Files (x86)\Microsoft ASP.NET\ASP.NET Web Pages\v1.0\;C:\Program Files\Microsoft SQL Server\110\Tools\Binn\;C:\Program Files (x86)\QuickTime\QTSystem\;C:\Program Files (x86)\Common Files\Acronis\SnapAPI\;C:\Program Files (x86)\Java\jre7\bin;C:\Program Files (x86)\Windows Kits\8.1\Windows Performance Toolkit\;C:\Program Files (x86)\Microsoft SDKs\TypeScript\;C:\Program Files (x86)\MySQL\MySQL Utilities 1.3.4\; ;C:\Chocolatey\bin;C:\tools\mysql\current\bin I'm being forced to use Windows by my work environment, I don't enjoy the state of affairs.

  Read the article

• Why is apache serving the default?

  - by Matt

  I keep adding more vhosts and enabling them but all the sites always do to the default vhost in sites-available here is what the default kind of looks like with me only changing the ip for security reasons <VirtualHost 167.889.88.88:80> ServerAdmin webmaster@localhost DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> and here is my other which i named some-site.net <VirtualHost *:80> ServerName some-site.net DocumentRoot "/var/www/vhosts/somesite.com/http/" <Directory "/var/www/vhosts/somesite.com/http/"> AllowOverride all Options -MultiViews </Directory> </VirtualHost> and it turned on my this command sudo a2ensite some-site.net Enabling site some-site.net. Run '/etc/init.d/apache2 reload' to activate new configuration! then i reloaded /etc/init.d/apache2 reload * Reloading web server config apache2 ...done. but when i visit the url some-site.net i get the index page that is for the default vhost...what am i doing wrong

  Read the article

• How to choose which network connection provides the default gateway in Windows XP

  - by Cathy

  I have a laptop with an integrated NIC and a WiFi connection. Both the wired and wireless networks I am using can access the Internet. Win XP is routing all traffic through the wireless network. I want to force it to route everything through the wired network when it is available (i.e. when I am sitting at my desk with the laptop docked) and through the wireless when that is the only option (i.e. when I have undocked my laptop and carried it to a conference room, or if I am out of the office working on a different WiFi network). The wireless connection cannot be established until after I am logged into Windows, so it's always the second network to become available to the OS. I have manually overridden the metric values in the TCP/IP configurations so that the NIC has metric 10 and the WiFi has metric 20. However, Windows is still picking the WiFi adapter's address as the Default Gateway, so this isn't helping. If I manually disable and re-enable the WiFi adapter, then it will switch the default gateway to the wired network and stay that way until I shutdown Windows. How can I tell Windows XP not to replace the default gateway when the WiFi connection is first enabled?

  Read the article

• Handling site not found and page not found with dynamic mass virtual hosting

  - by Rick Moynihan

  I have recently setup mass virtual hosting in Apache so that all we need to do is create a directory to create a new vhost. We're then also using wildcard DNS to map all subdomains to the server running our Apache instance. This works excellently, however I'm now having trouble configuring it to fail-over to an appropriate default/error-page when the vhost directory does not exist. The problem appears to be conflated between by my desire to handle the two error conditions: vhost not found i.e. there was no directory found matching the host supplied in the HTTP host header. I'd like this to display an appropriate site not found error page. The 404 page not found condition of the vhost. Additionally I have a specialised "api" vhost in its own vhost block. I've tried a number of variations and none seem to exhibit the behaviour I want. Here's what I'm working with right now: NameVirtualHost *:80 <VirtualHost *:80> DocumentRoot /var/www/site-not-found ServerName sitenotfound.mydomain.org ErrorDocument 500 /500.html ErrorDocument 404 /500.html </VirtualHost> <VirtualHost *:80> ServerName api.mydomain.org DocumentRoot /var/www/vhosts/api.mydomain.org/current # other directives, e.g. setting up passenger/rails etc... </VirtualHost> <VirtualHost *:80> # get the server name from the Host: header UseCanonicalName Off VirtualDocumentRoot /var/www/vhosts/%0/current # other directives ... e.g proxy passing to api etc... ErrorDocument 404 /404.html </VirtualHost> My understanding is that the first vhost block is used as the default, so I have this here as my catch all site. Next I have my API vhost, and then finally my mass vhost block. So for a domain that doesn't match the first two ServerName's and has no corresponding directory in /var/www/vhosts/ I'd expect it to fall-over to the first vhost, however with this setup, all domains resolve to my default site-not-found. Why is this? By putting the mass-vhost block first, I can get the mass-vhosts to resolve properly, but not my site-not-found vhost... and in this case I can't seem to find a way to distinguish between a page-level 404 in the vhost, and the case where the VirtualDocumentRoot fails to find a vhost directory (this appears to use the 404 also). Any help out of this bind is much appreciated!

  Read the article

• Specify default group and permissions for new files in a certain directory

  - by mislav

  I have a certain directory in which there is a project shared by multiple users. These users use SSH to gain access to this directory and modify/create files. This project should only be writeable to a certain group of users: lets call it "mygroup". During an SSH session, all files/directories created by the current user should by default be owned by group "mygroup" and have group-writeable permissions. I can solve the permissions problem with umask: $ cd project $ umask 002 $ touch test.txt File "test.txt" is now group-writeable, but still belongs to my default group ("mislav", same as my username) and not to "mygroup". I can chgrp recursively to set the desired group, but I wanted to know is there a way to set some group implicitly like umask changes default permissions during a session. This specific directory is a shared git repo with a working copy and I want git checkout and git reset operations to set the correct mask and group for new files created in the working copy. The OS is Ubuntu Linux. Update: a colleague suggests I should look into getfacl/setfacl of POSIX ACL but the solution below combined with umask 002 in the current session is good enough for me and is much more simple.

  Read the article

• Program for remove exact duplicate files while caching search results

  - by John Thomas

  We need a Windows 7 program to remove/check the duplicates but our situation is somewhat different than the standard one for which there are enough programs. We have a fairly large static archive (collection) of photos spread on several disks. Let's call them Disk A..M. We have also some disks (let's call them Disk 1..9) which contain some duplicates which are to be found on disks A..M. We want to add to our collection new disks (N, O, P... aso.) which will contain the photos from disks 1..9 but, of course, we don't want to have any photos two (or more) times. Of course, theoretically, the task can be solved with a regular file duplicate remover but the time needed will be very big. Ideally, AFAIS now, the real solution would be a program which will scan the disks A..M, store the file sizes/hashes of the photos in an indexed database/file(s) and will check the new disks (1..9) against this database. However I have hard time to find such a program (if exists). Other things to note: we consider that the Disks A..M (the collection) doesn't have any duplicates on them the file names might be changed we aren't interested in approximated (fuzzy) comparison which can be found in some photo comparing programs. We hunt for exact duplicate files. we aren't afraid of command line. :-) we need to work on Win7/XP we prefer (of course) to be freeware TIA for any suggestions, John Th.

  Read the article

• FreeRADIUS Default Answer

  - by jinanwow

  We are using FreeRADIUS with a MySQL database, authenticating users. We ran into an issue where are MySQL database was slow causing the max number of threads to be reached. The issue with this is, when the server couldn't answer the requests as there were no threads avaiable, it sent the response of Access-Reject to the clients. Our devices cache client connections and periodically checks with the server to see if they should still be allowed or to remove them. The equipment is designed that if there is no response from the server and a client is connected it will remain connected. The issue is, when the radius server is at its max threads, its default answer is to send access-reject (verified via packet capture), however we would like to change the default behavior to just ignore the request (keeping the clients connected). We have fixed the MySQL database issue for now, but I would like to change the default from Access-Reject, to just ignore the client altogeather. I have done research, but not able to find an answer to the question. Thanks in Advance.

  Read the article

• Setting Outlook Web Access as default mail client in Firefox

  - by Barton Chittenden

  The company that I work for is nice enough to let me use Linux for work, but they use Outlook. I've been using Outlook Web Access (OWA) as my mail client, which is more or less acceptable. The only problem is that whenever I click on a mailto link or use the "Send Link" menu option in firefox, I'm prompted to use evolution. Since connecting to an exchange server through evolution seems to be sketchy at best, I would like to set OWA as my default mail client. I'm using Firefox 3.6.13 Here's what I've found so far: Default mail client can be found at Edit Menu -> Preferences -> Applications Tab -> mailto When I click on the drop down menu, one of the options is "Application Details" This shows two options by default: Google Yahoo! Mail Each of these shows how to launch that service. For Gmail: https://mail.google.com/mail/?extsrc=mailto&url=%s For Yahoo!: http://compose.mail.yahoo.com/?To=%s I presume that Outlook Web Access has something similar. Based on the googling that I've done so far, I think that this should look something like this: https://<server name>/owa/?cmd=compose... A little experimentation on my part shows that the following will compose a message: https://<email server>/owa/?ae=Item&a=New&t=IPM.Note but I still don't know how to specify recipient, subject or body of the email to be composed... What I want to know is a) does anyone know the URL parameters to compose a mailto in Outlook Web Access, including subject, recipient and body? else b) can someone give me a decent pointer for where to get this information?

  Read the article

• All virtualhosts serving Apache default files

  - by tj111

  I'm trying to configure Apache as an in-network webserver, and am using the sites-available/sites-enabled feature as opposed to just static vhost files. I set up a couple VirtualHosts, all with a unique DocumentRoot, however request for all the VirtualHosts just serve up the "It's Working!" default file. I can't for the life of me figure out why it won't serve the content out of the correct directory. Here's the contents of the virtualhost directive files, let me know if I need to post more. default (note that apache renames this to 000-default in sites-enabled, so it's not an ordering issue) NameVirtualHost *:80 ServerName emp <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName emp DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> billmed <VirtualHost *:80> ServerName billmed.emp ServerRoot /home/empression/Projects/billmed/web/httpdocs <Directory "/home/empression/Projects/billmed/web/httpdocs"> Order Allow,Deny Allow from All </Directory> </VirtualHost> Note that I have DNS zones for both emp and billmed.emp, as well as entries in /etc/hosts. My ultimate goal is to set up this machine as an in-house webserver with a custom tld (emp), but progress has been pretty slow.

  Read the article

• Need help finding a program to split PDFs based on text in specific areas

  - by Sean

  I reeeeally need help with this. I work for a University in the admissions office and we get large PDFs of every document that an applicant uploads to us. What I need to do is split these PDFs into separate documents. Each of the separate documents has a head at the top of what type of document it is (Statement of Purpose, Transcript, etc). I found a program a few weeks ago that at first seemed to work great (A-PDF Splitter). It would look for every type of document in a combined PDF (eg. Statement of Purpose), and if it saw that heading it would create a new PDF named "ORIGINALFILENAME-Statement of Purpose". I soon discovered though that the program breaks for no reason on certain PDFs, and I have to take the time to take that PDF out of the queue and start the splitting over again (and we get 250 a day). I contacted their support and they basically told me I was SOL. So please, if you can find me a program to split PDFs into smaller PDFs based on if it finds particular text in a region, then I would be forever in dept to you. If I don't find one soon then I'm going to be spending the entire day splitting PDFs by hand and my boss isn't going to be happy.

  Read the article

• Two DHCP interfaces asigned to two default gateways to OS

  - by user140600

  I have a Ubuntu box that has two networking interfaces (eth0 and wlan0). They are both configured for DHCP in /etc/network/interfaces, but they both assign a default gateway: /etc/network/interfaces auto lo iface lo inet loopback auto eth0 iface eth0 inet dhcp auto wlan0 iface wlan0 inet dhcp wireless-essid test Result of route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 172.16.1.1 0.0.0.0 UG 100 0 0 wlan0 0.0.0.0 10.0.0.1 0.0.0.0 UG 100 0 0 eth0 10.0.0.0 0.0.0.0 255.255.255.0 U 0 0 0 eth0 172.16.1.0 0.0.0.0 255.255.255.0 U 0 0 0 wlan0 How can I set up /etc/network/interfaces to have only one default gateway, on the interface I want? Worst case scenario, how can I at least control which one gets on top on the route -n command, each boot? Note: This box will travel a lot, and will be connected to different networks, so I don´t know in advance the IP addresses/ranges it will have. Sometimes the default gw interface will be eth0. Sometimes it will be wlan0 ... So, this needs to be kind of automatic ...

  Read the article

• Disable Certain Firefox Plugins System-wide by Default

  - by Andrew Case

  I have firefox installed system-wide for all our users. Unfortunately the Adobe Reader Plug-in is rather flakey and doesn't work some of the time. As a result I want to disable the plug-in by default for all our users, but still allow them to enable it if they want via the standard Tools-Add-ons-Plug-ins menu option. How can I have this plug-ins enabled/disabled status be disabled by default? I've been able to configure system-wide configurations before by setting preferences in the mozilla root folder file defaults/pref/all.js, but enabled/disabled plugins doesn't appear to be configured in the preferences. [edit 1]: I found 'How to manage firefox plugins in pluginreg.dat file' which explained some of the formatting of the pluginreg.dat file. From there I could see flags are masked as follows (from nsPluginHostImpl.h): #define NS_PLUGIN_FLAG_ENABLED 0x0001 // is this plugin enabled? #define NS_PLUGIN_FLAG_OLDSCHOOL 0x0002 // is this a pre-xpcom plugin? #define NS_PLUGIN_FLAG_FROMCACHE 0x0004 // this plugintag info was loaded from cache #define NS_PLUGIN_FLAG_UNWANTED 0x0008 // this is an unwanted plugin #define NS_PLUGIN_FLAG_BLOCKLISTED 0x0010 // this is a blocklisted plugin But is there a way to add this to the defaults so that that NS_PLUGIN_FLAG_ENABLED is removed by default?

  Read the article

• Specify default group and permissions for new files in a certain directory

  - by mislav

  I have a certain directory in which there is a project shared by multiple users. These users use SSH to gain access to this directory and modify/create files. This project should only be writeable to a certain group of users: lets call it "mygroup". During an SSH session, all files/directories created by the current user should by default be owned by group "mygroup" and have group-writeable permissions. I can solve the permissions problem with umask: $ cd project $ umask 002 $ touch test.txt File "test.txt" is now group-writeable, but still belongs to my default group ("mislav", same as my username) and not to "mygroup". I can chgrp recursively to set the desired group, but I wanted to know is there a way to set some group implicitly like umask changes default permissions during a session. This specific directory is a shared git repo with a working copy and I want git checkout and git reset operations to set the correct mask and group for new files created in the working copy. The OS is Ubuntu Linux. Update: a colleague suggests I should look into getfacl/setfacl of POSIX ACL but the solution below combined with umask 002 in the current session is good enough for me and is much more simple.

  Read the article

• Default sending all mails from the one account on Outlook 2007

  - by user45774

  I have two email accounts configured on my outlook 2007. One account is connecting to my exchange server which is the default I have another account connecting to my gmail. I want to by default send or reply all the emails that I receive on my gmail account through my exchange server account only. When I try replying to the email that I receive from the gmail account it gets defaulted to the same (gmail account). I need to manually change it to exchange server account. I want that to be changed to exchange server account by default for all the mails that I send or reply to. I don't want to do the manual process mentioned below in steps: Step 1: In the message window, click Account. Step 2: Click the account that you want to use. Is there a way to set the exchange server account for sending and replying to all emails on outlook irrespective of the number of accounts that I have on outlook. I have my outlook installed on a windows 2003 server.

  Read the article

• Windows Server 2008: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008 How can you set the default IP address on a NIC when it has multiple IP addresses bound? There is more explication on my probleme. Here is the ipconfig DHCP Enabled. . . . . . . . . . . : No Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.99.49(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.51(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.52(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.53(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.54(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.55(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.56(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.57(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.58(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.59(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.60(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.61(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.62(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.64(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.65(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.66(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.67(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.68(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.70(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.71(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.100(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.108(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.109(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.112(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 IPv4 Address. . . . . . . . . . . : 192.168.99.63(Duplicate) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.99.1 If i do a pathping there is the answer, the first up is the 99.49, also if my default ip is 99.100 Tracing route to www.l.google.com [72.14.204.99] over a maximum of 30 hops: 0 Machine [192.168.99.49] There is the routing table on the machine Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 How i can be sure the ip use in the image ( suppose to be the default ip address ) will be use by my server as the default address ?

  Read the article

• Windows Server: specifying the default IP address when NIC has multiple addresses

  - by Cédric Boivin

  I have a Windows Server which has ~10 IP addresses statically bound. The problem is I don't know how to specify the default IP address. Sometimes when I assign a new address to the NIC, the default IP address changes with the last IP entered in the advanced IP configuration on the NIC. This has the effect (since I use NAT) that the outgoing public IP changes too. Even though this problem is currently on Windows Server 2008, I've had the same problem with a Windows Server 2003. How can you set the default IP address on a NIC when it has multiple IP addresses bound? I remark something. When i check route print i see is it there the problem ? 0.0.0.0 0.0.0.0 192.168.x.x 192.168.99.49 261 if i want the default ip be example : 192.168.99.100 There is my route. Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 192.168.99.1 192.168.99.49 261 10.10.10.0 255.255.255.0 On-link 10.10.10.10 261 10.10.10.10 255.255.255.255 On-link 10.10.10.10 261 10.10.10.255 255.255.255.255 On-link 10.10.10.10 261 192.168.99.0 255.255.255.0 On-link 192.168.99.49 261 192.168.99.49 255.255.255.255 On-link 192.168.99.49 261 192.168.99.51 255.255.255.255 On-link 192.168.99.49 261 192.168.99.52 255.255.255.255 On-link 192.168.99.49 261 192.168.99.53 255.255.255.255 On-link 192.168.99.49 261 192.168.99.54 255.255.255.255 On-link 192.168.99.49 261 192.168.99.55 255.255.255.255 On-link 192.168.99.49 261 192.168.99.56 255.255.255.255 On-link 192.168.99.49 261 192.168.99.57 255.255.255.255 On-link 192.168.99.49 261 192.168.99.58 255.255.255.255 On-link 192.168.99.49 261 192.168.99.59 255.255.255.255 On-link 192.168.99.49 261 192.168.99.60 255.255.255.255 On-link 192.168.99.49 261 192.168.99.61 255.255.255.255 On-link 192.168.99.49 261 192.168.99.62 255.255.255.255 On-link 192.168.99.49 261 192.168.99.64 255.255.255.255 On-link 192.168.99.49 261 192.168.99.65 255.255.255.255 On-link 192.168.99.49 261 192.168.99.66 255.255.255.255 On-link 192.168.99.49 261 192.168.99.67 255.255.255.255 On-link 192.168.99.49 261 192.168.99.68 255.255.255.255 On-link 192.168.99.49 261 192.168.99.70 255.255.255.255 On-link 192.168.99.49 261 192.168.99.71 255.255.255.255 On-link 192.168.99.49 261 192.168.99.100 255.255.255.255 On-link 192.168.99.49 261 192.168.99.108 255.255.255.255 On-link 192.168.99.49 261 192.168.99.109 255.255.255.255 On-link 192.168.99.49 261 192.168.99.112 255.255.255.255 On-link 192.168.99.49 261 192.168.99.255 255.255.255.255 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 192.168.99.49 261 224.0.0.0 240.0.0.0 On-link 10.10.10.10 261 255.255.255.255 255.255.255.255 On-link 192.168.99.49 261 255.255.255.255 255.255.255.255 On-link 10.10.10.10 261 I need to be certain, when i go on internet i go with the 192.168.99.100 how i do that ?

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >