Search Results

Search found 30289 results on 1212 pages for 'display settings'.

Page 42/1212 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• dhclient append settings from multiple DHCP servers

  - by Brian

  I have a server with two interfaces connected to two separate networks, using DHCP for both. When dhclient is writing /etc/resolv.conf, I would like it to append settings that aren't already there. For instance, if I receive from one DHCP server: nameserver 10.0.0.1 search one.mydomain.com and from another: nameserver 10.1.1.254 search two.mydomain.com Then resolv.conf should look like this: search one.mydomain.com two.mydomain.com nameserver 10.0.0.1 nameserver 10.1.1.254 At the moment, it seems the last dhclient overwrites whatever was there. I know I can preconfigure settings in dhclient.conf using supercede or append, but then I have to hard-code the values. I've scoured the man page for dhclient, but it seems like dhclient prefers to work alone (i.e. not in conjunction with any other dhclients)...or am I missing something?

  Read the article

• Can't find a wireless access point's IP address after changing router IP/LAN settings

  - by flagg19

  I have a modem/router, Netgear DG834, and a wireless access point (AP), Netgear WG602. The AP is directly connected to the router. My old working configuration was: Router IP address : 192.168.0.1 Access point IP address: 192.168.0.10 My new configuration is: Router IP address : 192.168.1.1 Access point IP address: ???.???.???.??? I changed my router's IP address/LAN settings to set up a VPN with another Netgear router that had the same LAN configuration. The wireless network is still up and perfectly working, but I can't find the AP's IP address. I've tried broadcast ping but the AP won't respond. I looked at the router "attached devices", but it's not there. I've played around with Nmap and arp request but the AP is totally invisible. I can fix it by resetting it to factory settings, but I'm very interested in learning more about this problem. I'm also interested in network security and this fact of having an invisible AP well, it's something I'd like to understand.

  Read the article

• VirtualBox VM settings between different CPUs (Processor/Acceleration)

  - by Level1Coder

  I have 2 PCs, 1 with a INTEL-Q9550 (YES-VT-x) and another with INTEL-E2160 (NO-VT-x) I will be using the Q9550 first to create a new VM, install XP and install stuff I'll need. Once this VM is golden, I plan on migrating this VM over to the E2160 machine. The question is, while creating/preparing this VM on the Q9550, should I disable all the following settings below to make sure the E2160 can start this VM without errors? Q9550 Default VM Settings ========================= PROCESSOR [X] Enable PAE/NX ACCELERATION [X] Enable VT-x/AMD-V [X] Enable Nested Paging

  Read the article

• Rails: Settingslogic accessible to users?

  - by neezer

  I have my app configured with Settingslogic, which I love. My question is how to I make a page on my Rails app where Administrators can make changes to the settings specified in config/settings.yml?? I assume said page would have to read and display appropriate form fields for all the values in the YAML file, then save those values back to config/settings.yml? Would those settings take effect immediately or would the server need to be restarted? Bit lost here. Thanks. Related: http://stackoverflow.com/questions/2907643/rails-application-settings

  Read the article

• DotNetNuke - Module settings disapear on new user control.

  - by jason clark

  Hi, I have a DNN module which renders a user control (view.ascx) All is ok ( I am logged in ) and I get the DNN settings menu. however when I add another control and load it like so: string url = Globals.NavigateURL(PortalSettings.ActiveTab.TabID, "View_Details", "mid=" + ModuleId.ToString()); Response.Redirect(url); I lose the settings link when the new control loads. Any ideas? Is there a property somewhere to turn on settings for the loaded user control?

  Read the article

• configure a Macbook Pro to use external monitor at boot (Debian Linux)

  - by Eric

  In the spirit of reuse, I've installed Debian (version 6.0.5 "squeeze") on my wife’s old Macbook Pro (circa 2009 or so), to repurpose it for various tasks. The catch is the display is flaky. It will last a random amount of time, between 2 minutes and 2 hours, before freezing and graying out. This is a known issue with that generation of MBP. Fortunately it’s no problem for me, as I plan to use it with an external monitor anyway. Which brings us to the problem: How do I configure this thing to output to the external display by default, and hopefully disable the built-in LCD? The ideal solution would be to modify a setting in the EFI (BIOS), but I’m not holding out much hope for that. Next best thing would be a kernel option I can pass to the NVIDIA driver. What won’t work is a solution that doesn’t give me a display until X starts. I need to have console access, especially given that the built-in LCD is dying, and any day now might give out completely. So far I haven’t been able to find anything online. lspci says I’ve got an NVIDIA GeForce 9400M Help is much appreciated! Eric PS if this question is better suited to the Unix & Linux area, pls advise and I will move it.

  Read the article

• Is there anyway to set values in the settings.bundle from within the APP

  - by joneswah

  Is there any way to set/update values in the settings.bundle from within your app. I am fine reading in values from the preferences into NSUserDefaults but was wondering whether you can set values from within the app. I have a web-app which I am making a iPhone client for and was thinking to include the users account details in the settings.bundle. This is fine if the user only updates the values through the Apple Application Preferences screens, but what if the user updated those values in the web app. I wanted to pull down the values from the web and then "update" the values in the settings.bundle from within the App. I am guessing that this is not possible and that maybe I need to create my own "in-app" settings screen? But thought I would check with you all first ...

  Read the article

• APC PHP cache size does not exceed 32MB, even though settings allow for more

  - by hardy101

  I am setting up APC (v 3.1.9) on a high-traffic WordPress installation on CentOS 6.0 64 bit. I have figured out many of the quirks with APC, but something is still not quite right. No matter what settings I change, APC never actually caches more than 32MB. I'm trying to bump it up to 256 MB. 32MB is a default amount for apc.shm_size, so I am wondering if it's stuck there somehow. I have run the following echo '2147483648' > /proc/sys/kernel/shmmax to increase my system's shared memory to 2G (half of my 4G box). Then ran ipcs -lm which returns ------ Shared Memory Limits -------- max number of segments = 4096 max seg size (kbytes) = 2097152 max total shared memory (kbytes) = 8388608 min seg size (bytes) = 1 Also made a change in /etc/sysctl.conf then ran sysctl -p to make the settings stick on the server. Rebooted, too, for good measure. In my APC settings, I have mmap enabled (which happens by default in recent versions of APC). php.ini looks like: apc.stat=0 apc.shm_size="256M" apc.max_file_size="10M" apc.mmap_file_mask="/tmp/apc.XXXXXX" apc.ttl="7200" I am aware that mmap mode will ignore references to apc.shm_segments, so I have left it out with default 1. phpinfo() indicates the following about APC: Version 3.1.9 APC Debugging Disabled MMAP Support Enabled MMAP File Mask /tmp/apc.bPS7rB Locking type pthread mutex Locks Serialization Support php Revision $Revision: 308812 $ Build Date Oct 11 2011 22:55:02 Directive Local Value apc.cache_by_default On apc.canonicalize O apc.coredump_unmap Off apc.enable_cli Off apc.enabled On On apc.file_md5 Off apc.file_update_protection 2 apc.filters no value apc.gc_ttl 3600 apc.include_once_override Off apc.lazy_classes Off apc.lazy_functions Off apc.max_file_size 10M apc.mmap_file_mask /tmp/apc.bPS7rB apc.num_files_hint 1000 apc.preload_path no value apc.report_autofilter Off apc.rfc1867 Off apc.rfc1867_freq 0 apc.rfc1867_name APC_UPLOAD_PROGRESS apc.rfc1867_prefix upload_ apc.rfc1867_ttl 3600 apc.serializer default apc.shm_segments 1 apc.shm_size 256M apc.slam_defense On apc.stat Off apc.stat_ctime Off apc.ttl 7200 apc.use_request_time On apc.user_entries_hint 4096 apc.user_ttl 0 apc.write_lock On apc.php reveals the following graph, no matter how long the server runs (cache size fluctuates and hovers at just under 32MB. See image http://i.stack.imgur.com/2bwMa.png You can see that the cache is trying to allocate 256MB, but the brown piece of the pie keeps getting recycled at 32MB. This is confirmed as refreshing the apc.php page shows cached file counts that move up and down (implying that the cache is not holding onto all of its files). Does anyone have an idea of how to get APC to use more than 32 MB for its cache size?? **Note that the identical behavior occurs for eaccelerator, xcache, and APC. I read here: http://www.litespeedtech.com/support/forum/archive/index.php/t-5072.html that suEXEC could cause this problem.

  Read the article

• Ubuntu Volume overriding settings set in Alsamixer

  - by Hayek

  Problem: How do I "lock in" the volume I set through alsamixer? I'm running Ubuntu 9.10. I adjusted the bass/treble columns in alsamixer but changing the system volume resets them all back to 100% I did save the settings by running alsactl store but everything is reset once I touch Ubuntu's volume icon in the top menu bar. This is rather painful because the computer is hooked up to a 650watt system with a massive subwoofer. As much as I enjoy my music, there's no need to have the walls vibrate :) What can I do to prevent Ubuntu from overriding the settings?

  Read the article

• Can't change picture import settings in Windows 7

  - by Joel in Gö

  I have foolishly set the picture import settings wrongly for when a camera card is put in my computer. It correctly asks me whether I would like to import the pictures using Windows picture import, and when I click on this option it flashes up the "import pictures" dialog very briefly, and then immediately gets on with importing the pictures to the wrong place. I simply want to click on the "import settings" link on the dialog - but it's too quick for me, and even if I do manage it it just ignores me. Windows Help, useful as ever, tells me to click on the link :) Any ideas? Thanks!

  Read the article

• windows 7 monitor instantly resumes from power off

  - by user167328

  It seems that some service or program is preventing my monitor from going into power save mode but I cannot find a way to dig down the cause. Does anybody know a way to find out which event may be causing the problem? Background information: If I leave/lock my computer I want to immediately power off the monitor. Stupid windows has no program for this so I use a third party utility. I use Display.exe from Noel Danjou since 2005 and have had no problem with it on XP, my Notebook with w7 x64 pro and at the office with w7 x64 enterprise. With my new home pc with w7 x64 pro the monitor goes off but instantly comes back on after a second. So I tested using a power plan with the shortest timeout of 1 minute but with that the display never goes off at all. (Setting a power plan timeout is no useful option because then I cannot read a document or watch a movie without the monitor going off) I could try trial and error methods but this is cumbersome and not what I regard as a professional solution. So I would prefer a way to analyze the windows events to find out the reason for the display staying active. Add On: In the meantime I tried safe mode and also exited from all tray programs but the problem is still there. I also checked the BIOS for special power settings but still no solution (P.S. Mobo is H87-G41 PC Mate with latest BIOS rev.)

  Read the article

• Windows 7/Outlook 2010 cut off controls on form windows

  - by D..

  I am running windows 7 with multiple monitors. 2 at 1920 x 1200 and 1 at 1600x900 resolution. Controls are cut off and I cannot view the entire content of the window. As far as I can tell I only have the issue with Outlook 2010, it may be present in other applications but I haven't noticed it. For example to get to the more settings button I have to use tab and then click enter. The more settings button is never visible. I have used applications that allow you to force windows to be resizable, however the anchoring is such that it remains cut off. This has been present over multiple clean installs on the system. My DPI is set to 100% unlike this issue.

  Read the article

• CoovaAP router does not get DHCP settings from modem

  - by Dan Sosedoff

  Im having some serious trouble making CoovaAP-powered router get network settings from modem. Wireless router works in captive portal mode (so it handles user login on the same device). But DNS settings and connection ip (for router) are not set as they supposed to via DHCP on modem. It makes installation in other location really complicated, because you have to go and set everything manually. For now i use google`s dns servers. What`s the way to make router self-configurable via modem's dhcp ?

  Read the article

• how is the the linux console displayed to the user and how does the user go about changing the conso

  - by Chris

  I've been searching for the last two day on trying to understand how the console displays itself to the user and how to change the console settings. I've had some luck along the way but nothing that I've found has giving me a real clear explanation of how the console is displayed or how to change or control it's display settings. Some examples that of what I'm looking for are as follows: How is the console displayed on the screen? I know with X11 it uses your graphics card driver to display graphics to the screen, but how is the consoles text mode handled? Could some one ether explain this to me or point me to an in-depth overview of it all? Is it possible to have multi-head support in console mode with separate tty's on each screen? If so how would I go about setting this up? How would you go about changing the size of the console display from the default 80x25 to a custom size? I'm testing anything I find on a debian testing build, which is just the minimal base install on a virtual box. In time I will be using this information to setup my main system which is multi-head with 3 monitors. I would like to be able to support all three displays in console mode if possible.

  Read the article

• Binding Properties.Settings to Textbox fails

  - by user268098

  I would like to define a key & value in Settings.settings and bind the value by declaration in the XAML (not in the code behind by command). Here's what I've been trying in vain: Create a WPF project "Exp1" with Visual Studio Express 2010. Set one key named "TextFromSettings" to the value "Some Text from Setting". Add the attribute xmlns:p="clr-namespace:Exp1.Properties;assembly=Exp1" to the tag. Add Text="{Binding Path=TextFromSettings, Mode=TwoWay, Source={x:Static p:Settings.Default}}" to the tag Now, the preview window shows the text, however, the compiler fails: "Error 1 Cannot find the type 'Settings'. Note that type names are case sensitive." Where am I going wrong?

  Read the article

• PHP.ini Settings Are Ignored By PHP5.3.5 Running With Windows 7 And Apache 2.2.15

  - by Andy

  I did an install of PHP5.3.5 on Windows 7 Home Premium using the MSI installer download. I got it to overwrite a previous version of PHP5 in C:\php5\ When first testing it, the server failed to start. I fixed this by adding the path to PHP in the Apache2.2 httpd file where the installer had inserted 2 lines of coded pointing to the ini file directory and the PHP DLL but had left out the directory path. After doing this, the server starts ok and I can run phpinfo to view the PHP settings in my web browser on local host. In the phpinfo it states that the loaded configuration file is C:\php5\php.ini as expected. But if I make any changes to the settings, and reboot the server, none of the changes are reflected in phpinfo. Yes, I do refresh the browser window. If I rename the php.ini to something else to make it invisible phpinfo then correctly identifies that there is no php.ini file loaded. So the settings in php.ini are being ignored and some default settings are being used (but I have no idea where these are derived from). As far as I can tell, there are no other php.ini files on my computer. In phpinfo it states that the Configuration File (php.ini) Path is C:\Windows but this is the same as on a Windows XP computer that I work on. And in the windows folder I don't see any php.ini file. In the windows registry, there is no mention of PHP5, and the PATH environment variable starts with C:\php5\; So hopefully someone can suggest how I can get PHP5 to take notice of the C:\php5\php.ini settings. :)

  Read the article

• Single space on secondary display?

  - by zoul

  Hello! Is it possible to only have one space on secondary display when using Spaces on Mac? I’d like to have three spaces on the primary display and only use the secondary one as a common “sideboard” that does not change when I switch Spaces on the primary display.

  Read the article

• Missing Test Settings template in VS2010 Ultimate

  - by JustLoren

  I'm attempting to add a Test Settings file to my Unit Tests project in VS2010. All websites seem to simply say "Go to Add New Item Installed Templates Test Settings". However, I don't have Test Settings as an option in my Installed Templates (nor does searching for them online turn up any results). Can someone point me in the right direction for what I need to do?

  Read the article

• How do I use multiple settings file in Django with multiple sites on one server?

  - by William Bing Hua

  I have an ec2 instance running Ubuntu 14.04 and I want to host two sites from it. On my first site I have two settings file, production_settings.py and settings.py (for local development). I import the local settings into the production settings and override any settings with the production settings file. Since my production settings file is not the default settings.py name, I have to create an environment variable DJANGO_SETTINGS_MODULE='site1.production_settings' However because of this whenever I try to start my second site it says No module named site1.production_settings I am assuming that this is due to me setting the environment variable. Another problem is that I won't be able to use different settings file for different sites. How do I start use two different settings file for two different websites?

  Read the article

• how to build and run core apps of ics like settings, camera etc on windows

  - by user1495186

  I have downloaded ics 4.0.3 source code, want to modify native settings, what i have to do is 1) add custom modifications to the settings 2) recompile native settings with added modifications 3) build the source code 4) generate a customized build to work on all android devices. How can I achieve the above thing? Every suggestion is appreciated. Thanks in advance. FYI: Using win7,4gb ram, intel i5 processor. Installed cygwin,git.

  Read the article

• c#: storing lots of data in my.settings

  - by every_answer_gets_a_point

  i will need to store 3 tables of data instead of implementing an entire database backend, i just want to store the record for these tables in application.settings has anyone done this before? i dont care about security is it advisable to do it with application settings? how else would you do it? perhaps storing a matrix in application.settings would be OK?

  Read the article

• Possible to alert server to iphone settings change?

  - by DougW

  I'm working on giving our users context-specific PUSH notification settings, similar to what Facebook has in their settings menu. As far as I can tell though, there's no way to actually notify our server of these changes until the user actually launches the app. Is this correct? Is there any mechanism provided for immediately alerting our servers to a settings change?

  Read the article

• Multi-monitor resolution and position settings lost after reboot

  - by SoftDeveloper

  I've had two 1280x1024 monitors running for years on an nVidia 8800GT card with no problems. I've now replaced one monitor with a new 2560x1440 one. The card seems to support both fine, however every time I reboot the resolutions and monitor positions revert to the old settings. I've tried upgrading, downgrading, stripping out and reinstalling many versions of the nvidia drivers to no avail. Logging in as another user doesn't help - same problem. Booting into another another OS (Win7 64) works OK, so it is just this OS installation. During boot up everything looks fine (ie native 2450x1440 res) until the nVidia control panel or something is loaded which flips it back into the old mode. I have no old saved nvidia profiles. I can't find anything in the registry relating to these old settings. Its driving me crazy having to set resolutions and realign monitors on every reboot! Can anybody help?

  Read the article

• NSUserDefaults with in-app Settings bundle

  - by Hema Vasudevan

  I'm in the process of building an app and would prefer to have an in-app specific Settings bundle rather than make it available in the Settings application. I'm using NSUserDefaults class to save and retrieve them but would like to have the same Settings app look and feel. I wanted to use InAppSettingsKit or the llamasettings but don't know how to use the NSUserDefaults class. Those kits tell me how to create a .plist file and use their kits. All I need is use the Settings app look and feel while at the same time use NSUserDefaults class to save and retrieve values. Please help.

  Read the article

• Video streaming over multi display units

  - by ramdaz

  We have to share video across around 4/8 terminals at a public facility where we need to display live video from within the facility, as well as display messages(advertisements), and also play videos(not live) which need to be controlled centrally from another location. We can do central location handling over Internet, over ssh. What we want to do is connect cameras to a computer, and use the computer to display over multiple display units. We need to do live titling if possible. Once the live local telecast which usually takes about an hour or two a day, we would like to play other videos locally off the PC server. Preferably everything should run off Linux, since budgets are very constrained.... Addendum -- Its not over WAN, it's over a local area. I prefer not using LAN, we would rather use co-axial cable if possible. The reason is if it's LAN, I need some kind of an Networking device, at least a thin client

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >