Search Results

Search found 9667 results on 387 pages for 'hardware monitoring'.

Page 42/387 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • Intel Xeon 5600 (Westmere-EP) and AMD Magny-Cours Performance Update

    - by jchang
    HP has just released TPC-C and TPC-E results for the ProLiant DL380G7 with 2 Xeon 5680 3.33GHz 6-core processor, allowing a direct comparison with their DL385G& with 2 Opteron 6176 2.3GHz 12-core processors. Last month I complained about the lack of performance results for the Intel Xeon 5600 6-core 32nm processor line for 2-way systems. This might have been deliberate to not complicate the message for the Xeon 7500 8-core 45nm (for 4-way+ systems) launch two weeks later. http://sqlblog.com/blogs/joe_chang/archive/2010/04/07/intel-xeon-5600-westmere-ep-and-7500-nehalem-ex.aspx...(read more)

    Read the article

  • Why is Star Craft II lagging with these specs? [closed]

    - by Kev
    17.3" FULL HD (1920X1080) LED LCD w/nVIDIA GeForce® GT 425M w/1GB GDDR3 + Intel GMA HD4500 i also got the 640m core i7, i have 8 gb ram but for some damn reason, when there is a batle in progress it appears as if my graphics card or something is not powerful enough, shouldn't these specs be more than enough to handle star craft II? what could i do to improve my laptop? i also got the 64 bit os

    Read the article

  • Ubuntu 10.04 - unable to install Arduino

    - by Newbie
    Hello! At the moment, I try to install Arduino on my Ubuntu 10.04 (32 Bit) computer. I downloaded the latest release at http://arduino.cc/en/Main/Software, cd'ed to the directory and unziped the package. When I try to run ./arduino , I get following error: Exception in thread "main" java.lang.ExceptionInInitializerError at processing.app.Base.main(Base.java:112) Caused by: java.awt.HeadlessException at sun.awt.HeadlessToolkit.getMenuShortcutKeyMask(HeadlessToolkit.java:231) at processing.core.PApplet.<clinit>(Unknown Source) ... 1 more Here is my java -version output: java version "1.6.0_20" OpenJDK Runtime Environment (IcedTea6 1.9.5) (6b20-1.9.5-0ubuntu1~10.04.1) OpenJDK Server VM (build 19.0-b09, mixed mode) Any suggestions on this? I try to install arduino without the 'arduino' package. I tried to install it with apt-get (sudo apt-get install arduino). When I try to start arduino (using arduino command) will cause following error: Exception in thread "main" java.lang.ExceptionInInitializerError at processing.app.Preferences.load(Preferences.java:553) at processing.app.Preferences.load(Preferences.java:549) at processing.app.Preferences.init(Preferences.java:142) at processing.app.Base.main(Base.java:188) Caused by: java.awt.HeadlessException at sun.awt.HeadlessToolkit.getMenuShortcutKeyMask(HeadlessToolkit.java:231) at processing.core.PApplet.<clinit>(PApplet.java:224) ... 4 more Update: I saw that I installed several versions of jre (sun and open). So I uninstalled the open jre. Now, when calling arduino I get a new error: java.lang.UnsatisfiedLinkError: no rxtxSerial in java.library.path thrown while loading gnu.io.RXTXCommDriver Exception in thread "main" java.lang.UnsatisfiedLinkError: no rxtxSerial in java.library.path at java.lang.ClassLoader.loadLibrary(ClassLoader.java:1734) at java.lang.Runtime.loadLibrary0(Runtime.java:823) at java.lang.System.loadLibrary(System.java:1028) at gnu.io.CommPortIdentifier.<clinit>(CommPortIdentifier.java:123) at processing.app.Editor.populateSerialMenu(Editor.java:965) at processing.app.Editor.buildToolsMenu(Editor.java:717) at processing.app.Editor.buildMenuBar(Editor.java:502) at processing.app.Editor.<init>(Editor.java:194) at processing.app.Base.handleOpen(Base.java:698) at processing.app.Base.handleOpen(Base.java:663) at processing.app.Base.handleNew(Base.java:578) at processing.app.Base.<init>(Base.java:318) at processing.app.Base.main(Base.java:207)

    Read the article

  • How can I filter packets from a port monitor?

    - by engineerchuan
    I have some data going from Point A to Point B. I have a SPAN monitor set up to a monitoring device C. To recreate some real world scenarios, I want to filter out all traffic which is a certain type (H.323 VoIP Signaling Packets) so that C sees a subset of the information that is flowing from A to B. What would the easiest way to do this be? I assume I would need a computer with 2 NIC cards and some software to examine each packet and chuck out the H.323 VoIP packets? Thanks!

    Read the article

  • Intel Xeon 5600 (Westmere-EP) and 7500 (Nehalem-EX)

    - by jchang
    Intel Xeon 5600 (Westmere-EP) and 7500 (Nehalem-EX) Performance Intel launched the Xeon 5600 series (Westmere-EP, 32nm) six-core processors on 16 March 2010 without any TPC benchmark results. In the performance world, no results almost always mean bad or not good results. Yet there is every reason to believe that the Xeon 5600 series with six-cores (X models only) will performance exactly as expected for a 50% increase in the number of cores at the same frequency (as the 5500) with no system level...(read more)

    Read the article

  • What Is the Purpose of the “Do Not Cover This Hole” Hole on Hard Drives?

    - by Jason Fitzpatrick
    From tiny laptop hard drives to beefier desktop models, traditional disk-based hard drives have a very bold warning on them: DO NOT COVER THIS HOLE. What exactly is the hole and what terrible fate would befall you if you covered it? Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-drive grouping of Q&A web sites. How Hackers Can Disguise Malicious Programs With Fake File Extensions Can Dust Actually Damage My Computer? What To Do If You Get a Virus on Your Computer

    Read the article

  • CMUS Error: opening audio device: No such device

    - by clamp
    I cant seem to play any audio with CMUS because it always gives the above error the output of lspci -v | grep -A7 -i "audio" gives 00:1b.0 Audio device: Intel Corporation NM10/ICH7 Family High Definition Audio Controller (rev 02) Subsystem: ASRock Incorporation Device c892 Flags: bus master, fast devsel, latency 0, IRQ 49 Memory at dff00000 (64-bit, non-prefetchable) [size=16K] Capabilities: Kernel driver in use: snd_hda_intel 00:1c.0 PCI bridge: Intel Corporation NM10/ICH7 Family PCI Express Port 1 (rev 02) (prog-if 00 [Normal decode]) what could be the problem?

    Read the article

  • Z600 Workstation ACPI Fan Noise

    - by dpb
    Hi -- I have an HP z600 workstation that has the FAN running full when idle. In fact, after the boot, the fan never slows down or varies. I looked in dmesg, and noticed this: [ 1.516778] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.516781] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.516786] ACPI: Marking method _OSC as Serialized because of AE_ALREADY_EXISTS error [ 1.519868] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.519872] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624638] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624642] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624726] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624729] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624802] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624805] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624895] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624898] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.624977] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.624981] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625070] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625074] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS [ 1.625153] ACPI Error (dsfield-0143): [CAPD] Namespace lookup failure, AE_ALREADY_EXISTS [ 1.625157] ACPI Error (psparse-0537): Method parse/execution failed [\_SB_.PCI0._OSC] (Node ffff8801b8c4e3e0), AE_ALREADY_EXISTS Anyone know what could be done to fix this?

    Read the article

  • HTG Explains: Do Non-Windows Platforms Like Mac, Android, iOS, and Linux Get Viruses?

    - by Chris Hoffman
    Viruses and other types of malware seem largely confined to Windows in the real world. Even on a Windows 8 PC, you can still get infected with malware. But how vulnerable are other operating systems to malware? When we say “viruses,” we’re actually talking about malware in general. There’s more to malware than just viruses, although the word virus is often used to talk about malware in general. Why Are All the Viruses For Windows? Not all of the malware out there is for Windows, but most of it is. We’ve tried to cover why Windows has the most viruses in the past. Windows’ popularity is definitely a big factor, but there are other reasons, too. Historically, Windows was never designed for security in the way that UNIX-like platforms were — and every popular operating system that’s not Windows is based on UNIX. Windows also has a culture of installing software by searching the web and downloading it from websites, whereas other platforms have app stores and Linux has centralized software installation from a secure source in the form of its package managers. Do Macs Get Viruses? The vast majority of malware is designed for Windows systems and Macs don’t get Windows malware. While Mac malware is much more rare, Macs are definitely not immune to malware. They can be infected by malware written specifically for Macs, and such malware does exist. At one point, over 650,000 Macs were infected with the Flashback Trojan. [Source] It infected Macs through the Java browser plugin, which is a security nightmare on every platform. Macs no longer include Java by default. Apple also has locked down Macs in other ways. Three things in particular help: Mac App Store: Rather than getting desktop programs from the web and possibly downloading malware, as inexperienced users might on Windows, they can get their applications from a secure place. It’s similar to a smartphone app store or even a Linux package manager. Gatekeeper: Current releases of Mac OS X use Gatekeeper, which only allows programs to run if they’re signed by an approved developer or if they’re from the Mac App Store. This can be disabled by geeks who need to run unsigned software, but it acts as additional protection for typical users. XProtect: Macs also have a built-in technology known as XProtect, or File Quarantine. This feature acts as a blacklist, preventing known-malicious programs from running. It functions similarly to Windows antivirus programs, but works in the background and checks applications you download. Mac malware isn’t coming out nearly as quick as Windows malware, so it’s easier for Apple to keep up. Macs are certainly not immune to all malware, and someone going out of their way to download pirated applications and disable security features may find themselves infected. But Macs are much less at risk of malware in the real world. Android is Vulnerable to Malware, Right? Android malware does exist and companies that produce Android security software would love to sell you their Android antivirus apps. But that isn’t the full picture. By default, Android devices are configured to only install apps from Google Play. They also benefit from antimalware scanning — Google Play itself scans apps for malware. You could disable this protection and go outside Google Play, getting apps from elsewhere (“sideloading”). Google will still help you if you do this, asking if you want to scan your sideloaded apps for malware when you try to install them. In China, where many, many Android devices are in use, there is no Google Play Store. Chinese Android users don’t benefit from Google’s antimalware scanning and have to get their apps from third-party app stores, which may contain infected copies of apps. The majority of Android malware comes from outside Google Play. The scary malware statistics you see primarily include users who get apps from outside Google Play, whether it’s pirating infected apps or acquiring them from untrustworthy app stores. As long as you get your apps from Google Play — or even another secure source, like the Amazon App Store — your Android phone or tablet should be secure. What About iPads and iPhones? Apple’s iOS operating system, used on its iPads, iPhones, and iPod Touches, is more locked down than even Macs and Android devices. iPad and iPhone users are forced to get their apps from Apple’s App Store. Apple is more demanding of developers than Google is — while anyone can upload an app to Google Play and have it available instantly while Google does some automated scanning, getting an app onto Apple’s App Store involves a manual review of that app by an Apple employee. The locked-down environment makes it much more difficult for malware to exist. Even if a malicious application could be installed, it wouldn’t be able to monitor what you typed into your browser and capture your online-banking information without exploiting a deeper system vulnerability. Of course, iOS devices aren’t perfect either. Researchers have proven it’s possible to create malicious apps and sneak them past the app store review process. [Source] However, if a malicious app was discovered, Apple could pull it from the store and immediately uninstall it from all devices. Google and Microsoft have this same ability with Android’s Google Play and Windows Store for new Windows 8-style apps. Does Linux Get Viruses? Malware authors don’t tend to target Linux desktops, as so few average users use them. Linux desktop users are more likely to be geeks that won’t fall for obvious tricks. As with Macs, Linux users get most of their programs from a single place — the package manager — rather than downloading them from websites. Linux also can’t run Windows software natively, so Windows viruses just can’t run. Linux desktop malware is extremely rare, but it does exist. The recent “Hand of Thief” Trojan supports a variety of Linux distributions and desktop environments, running in the background and stealing online banking information. It doesn’t have a good way if infecting Linux systems, though — you’d have to download it from a website or receive it as an email attachment and run the Trojan. [Source] This just confirms how important it is to only run trusted software on any platform, even supposedly secure ones. What About Chromebooks? Chromebooks are locked down laptops that only run the Chrome web browser and some bits around it. We’re not really aware of any form of Chrome OS malware. A Chromebook’s sandbox helps protect it against malware, but it also helps that Chromebooks aren’t very common yet. It would still be possible to infect a Chromebook, if only by tricking a user into installing a malicious browser extension from outside the Chrome web store. The malicious browser extension could run in the background, steal your passwords and online banking credentials, and send it over the web. Such malware could even run on Windows, Mac, and Linux versions of Chrome, but it would appear in the Extensions list, would require the appropriate permissions, and you’d have to agree to install it manually. And Windows RT? Microsoft’s Windows RT only runs desktop programs written by Microsoft. Users can only install “Windows 8-style apps” from the Windows Store. This means that Windows RT devices are as locked down as an iPad — an attacker would have to get a malicious app into the store and trick users into installing it or possibly find a security vulnerability that allowed them to bypass the protection. Malware is definitely at its worst on Windows. This would probably be true even if Windows had a shining security record and a history of being as secure as other operating systems, but you can definitely avoid a lot of malware just by not using Windows. Of course, no platform is a perfect malware-free environment. You should exercise some basic precautions everywhere. Even if malware was eliminated, we’d have to deal with social-engineering attacks like phishing emails asking for credit card numbers. Image Credit: stuartpilbrow on Flickr, Kansir on Flickr     

    Read the article

  • Which GPU with my CPU for 1080p flash?

    - by oshirowanen
    Based on the following site: http://www.adobe.com/products/flashplayer/systemreqs/ I need the following minimum spec to play 1080p flash video via a browser: CPU: 1.8GHz Intel Core Duo, AMD Athlon 64 X2 4200+, or faster processor RAM: 512MB of RAM GPU: 64MB of graphics memory I only have a 2.8GHz Pentium 4 process which is no where near as good as the processor listed above. I don't want to upgrade my processor as I think it will mean I have to change the motherboard etc. So, my question is, what is the cheapest PCI-E GPU I can buy which will allow me to play smooth 1080p flash video via a browser. I think the cheapest I can get is the 8400GS, but am not sure if that will be able to handle 1080p with the processor I have. I have looked at the GT520 and was wondering if this is the cheapest GPU which I need, or if there is something cheaper which will do 1080p with a 2.8GHz Pentium 4. Or, will I have to get something better than a GT520?

    Read the article

  • IBM System x3850 X5 TPC-H Benchmark

    - by jchang
    IBM just published a TPC-H SF 1000 result for their x3850 X5 , 4-way Xeon 7560 system featuring a special MAX5 memory expansion board to support 1.5TB memory. In Dec 2010, IBM also published a TPC-H SF1000 for their Power 780 system, 8-way, quad-core, (4 logical processors per physical core). In Feb 2011, Ingres published a TPC-H SF 100 on a 2-way Xeon 5680 for their VectorWise column-store engine (plus enhancements for memory architecture, SIMD and compression). The figure table below shows TPC-H...(read more)

    Read the article

  • How to Buy an SD Card: Speed Classes, Sizes, and Capacities Explained

    - by Chris Hoffman
    Memory cards are used in digital cameras, music players, smartphones, tablets, and even laptops. But not all SD cards are created equal — there are different speed classes, physical sizes, and capacities to consider. Different devices require different types of SD cards. Here are the differences you’ll need to keep in mind when picking out the right SD card for your device. Speed Class In a nutshell, not all SD cards offer the same speeds. This matters for some tasks more than it matters for others. For example, if you’re a professional photographer taking photos in rapid succession on a DSLR camera saving them in high-resolution RAW format, you’ll want a fast SD card so your camera can save them as fast as possible. A fast SD card is also important if you want to record high-resolution video and save it directly to the SD card. If you’re just taking a few photos on a typical consumer camera or you’re just using an SD card to store some media files on your smartphone, the speed isn’t as important. Manufacturers use “speed classes” to measure an SD card’s speed. The SD Association that defines the SD card standard doesn’t actually define the exact speeds associated with these classes, but they do provide guidelines. There are four different speed classes — 10, 8, 4, and 2. 10 is the fastest, while 2 is the slowest. Class 2 is suitable for standard definition video recording, while classes 4 and 6 are suitable for high-definition video recording. Class 10 is suitable for “full HD video recording” and “HD still consecutive recording.” There are also two Ultra High Speed (UHS) speed classes, but they’re more expensive and are designed for professional use. UHS cards are designed for devices that support UHS. Here are the associated logos, in order from slowest to fastest:       You’ll probably be okay with a class 4 or 6 card for typical use in a digital camera, smartphone, or tablet. Class 10 cards are ideal if you’re shooting high-resolution videos or RAW photos. Class 2 cards are a bit on the slow side these days, so you may want to avoid them for all but the cheapest digital cameras. Even a cheap smartphone can record HD video, after all. An SD card’s speed class is identified on the SD card itself. You’ll also see the speed class on the online store listing or on the card’s packaging when purchasing it. For example, in the below photo, the middle SD card is speed class 4, while the two other cards are speed class 6. If you see no speed class symbol, you have a class 0 SD card. These cards were designed and produced before the speed class rating system was introduced. They may be slower than even a class 2 card. Physical Size Different devices use different sizes of SD cards. You’ll find standard-size CD cards, miniSD cards, and microSD cards. Standard SD cards are the largest, although they’re still very small. They measure 32x24x2.1 mm and weigh just two grams. Most consumer digital cameras for sale today still use standard SD cards. They have the standard “cut corner”  design. miniSD cards are smaller than standard SD cards, measuring 21.5x20x1.4 mm and weighing about 0.8 grams. This is the least common size today. miniSD cards were designed to be especially small for mobile phones, but we now have a smaller size. microSD cards are the smallest size of SD card, measuring 15x11x1 mm and weighing just 0.25 grams. These cards are used in most cell phones and smartphones that support SD cards. They’re also used in many other devices, such as tablets. SD cards will only fit into marching slots. You can’t plug a microSD card into a standard SD card slot — it won’t fit. However, you can purchase an adapter that allows you to plug a smaller SD card into a larger SD card’s form and fit it into the appropriate slot. Capacity Like USB flash drives, hard drives, solid-state drives, and other storage media, different SD cards can have different amounts of storage. But the differences between SD card capacities don’t stop there. Standard SDSC (SD) cards are 1 MB to 2 GB in size, or perhaps 4 GB in size — although 4 GB is non-standard. The SDHC standard was created later, and allows cards 2 GB to 32 GB in size. SDXC is a more recent standard that allows cards 32 GB to 2 TB in size. You’ll need a device that supports SDHC or SDXC cards to use them. At this point, the vast majority of devices should support SDHC. In fact, the SD cards you have are probably SDHC cards. SDXC is newer and less common. When buying an SD card, you’ll need to buy the right speed class, size, and capacity for your needs. Be sure to check what your device supports and consider what speed and capacity you’ll actually need. Image Credit: Ryosuke SEKIDO on Flickr, Clive Darra on Flickr, Steven Depolo on Flickr

    Read the article

  • Anything Mouse Like Isn't Seen by Ubuntu 13.10

    - by belkinsa
    I have a upgraded 13.10 from 13.04 and today this issue of anything that is mouse-like is not seen by Ubuntu. The only input device that works is my Wacom Tablet and it's pen. I already checked for updates and have the latest updates for the Ubuntu system. Here is the lsusb output: Bus 002 Device 002: ID 04f2:b209 Chicony Electronics Co., Ltd Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 002: ID 056a:00b8 Wacom Co., Ltd Intuos4 4x6 Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub This is issue a bug or how to fix it? I can't even use the Live USB of Ubuntu 13.10 to fix the issue. EDIT 1: Seems that Ubuntu isn't seeing the clicks done by a mouse if it's the Wacom tablet. EDIT 2: I think it's a bug but I need help to report it.

    Read the article

  • 6 Things You Shouldn’t Do With Solid-State Drives

    - by Chris Hoffman
    Solid-state drives are different from the mechanical, magnetic hard drives in wide use. Many of the things you’ve done with typical mechanical hard drives shouldn’t be done with newer solid-state drives. Solid-state drives are presented by the operating system the same way mechanical drives are, but they work differently. If you’re a geek, knowing what you shouldn’t do is important.    

    Read the article

  • Prepping the Raspberry Pi for Java Excellence (part 1)

    - by HecklerMark
    I've only recently been able to begin working seriously with my first Raspberry Pi, received months ago but hastily shelved in preparation for JavaOne. The Raspberry Pi and other diminutive computing platforms offer a glimpse of the potential of what is often referred to as the embedded space, the "Internet of Things" (IoT), or Machine to Machine (M2M) computing. I have a few different configurations I want to use for multiple Raspberry Pis, but for each of them, I'll need to perform the following common steps to prepare them for their various tasks: Load an OS onto an SD card Get the Pi connected to the network Load a JDK I've been very happy to see good friend and JFXtras teammate Gerrit Grunwald document how to do these things on his blog (link to article here - check it out!), but I ran into some issues configuring wi-fi that caused me some needless grief. Not knowing if any of the pitfalls were caused by my slightly-older version of the Pi and not being able to find anything specific online to help me get past it, I kept chipping away at it until I broke through. The purpose of this post is to (hopefully) help someone else recognize the same issues if/when they encounter them and work past them quickly. There is a great resource page here that covers several ways to get the OS on an SD card, but here is what I did (on a Mac): Plug SD card into reader on/in Mac Format it (FAT32) Unmount it (diskutil unmountDisk diskn, where n is the disk number representing the SD card) Transfer the disk image for Debian to the SD card (dd if=2012-08-08-wheezy-armel.img of=/dev/diskn bs=1m) Eject the card from the Mac (diskutil eject diskn) There are other ways, but this is fairly quick and painless, especially after you do it several times. Yes, I had to do that dance repeatedly (minus formatting) due to the wi-fi issues, as it kept killing the ability of the Pi to boot. You should be able to dramatically reduce the number of OS loads you do, though, if you do a few things with regard to your wi-fi. Firstly, I strongly recommend you purchase the Edimax EW-7811Un wi-fi adapter. This adapter/chipset has been proven with the Raspberry Pi, it's tiny, and it's cheap. Avoid unnecessary aggravation and buy this one! Secondly, visit this page for a script and instructions regarding how to configure your new wi-fi adapter with your Pi. Here is the rub, though: there is a missing step. At least for my combination of Pi version, OS version, and uncanny gift of timing and luck there was. :-) Here is the sequence of steps I used to make the magic happen: Plug your newly-minted SD card (with OS) into your Pi and connect a network cable (for internet connectivity) Boot your Pi. On the first boot, do the following things: Opt to have it use all space on the SD card (will require a reboot eventually) Disable overscan Set your timezone Enable the ssh server Update raspi-config Reboot your Pi. This will reconfigure the SD to use all space (see above). After you log in (UID: pi, password: raspberry), upgrade your OS. This was the missing step for me that put a merciful end to the repeated SD card re-imaging and made the wi-fi configuration trivial. To do so, just type sudo apt-get upgrade and give it several minutes to complete. Pour yourself a cup of coffee and congratulate yourself on the time you've just saved.  ;-) With the OS upgrade finished, now you can follow Mr. Engman's directions (to the letter, please see link above), download his script, and let it work its magic. One aside: I plugged the little power-sipping Edimax directly into the Pi and it worked perfectly. No powered hub needed, at least in my configuration. To recap, that OS upgrade (at least at this point, with this combination of OS/drivers/Pi version) is absolutely essential for a smooth experience. Miss that step, and you're in for hours of "fun". Save yourself! I'll pick up next time with more of the Java side of the RasPi configuration, but as they say, you have to cross the moat to get into the castle. Hopefully, this will help you do just that. Until next time! All the best, Mark 

    Read the article

  • After upgrading to 12.04 the scanner from Brother Printer MFC-290C does not work

    - by Lorenzo
    I upgraded Ubuntu to 12.04 from 11.10. The printer works, but the scanner doesn't now. In 11.10 I had to install a special driver from Brother. The printer's model is Brother MFC-290C. The computer is a Toshiba Satellite. How can I get the scanner working? Update: I have a 64-bit installation on the Toshiba Satellite. Thank you for your instructions, Chad--24216. I followed each step: 1 through 5. I also updated the Brother Linux scanner S-KEY tool. The output of dpkg -l | grep Brother is: ii brscan-skey 0.2.3-0 Brother Linux scanner S-KEY tool ii brscan3 0.2.11-5 Brother Scanner Driver ii mfc290ccupswrapper:i386 1.1.2-2 Brother CUPS Inkjet Printer Definitions ii mfc290clpr:i386 1.1.2-2 Brother lpr Inkjet Printer Definitions ii printer-driver-ptouch 1.3-3ubuntu0.1 printer driver Brother P-touch label printers Still the scanner does not work. Here is the message from Xsane: Failed to open device brother3:bus6;dev1: Invalid argument. Here is the message from Simple Scan: Failed to scan. Unable to connect to scanner. And Scan Utility still doesn't display the scanner line.

    Read the article

  • Does anyone know a way to interact with HP OV(NNM) with python, perl or bash?

    - by marc.riera
    Do anyone know if there is out there any API/library to access NNM database from perl or python? We have a NNM 7.53 which give us access to its data with its java based applet through http. And of course through the 'ovw' GUI interface. I've tried to use Mechanize and selenium2(webdriver) to automatize some checks. The pourpose is to integrate it with our other monitoring services on our "general master console". Many thanks. Marc

    Read the article

  • How to monitor Flash applets?

    - by Francis3
    We created a fancy Flash application for a customer and deployed it. The server itself is monitored by the hosting company, but is there any external monitoring service that works well with Flash applets? We want to test that (a) the Flash app is working ok and (b) monitor and log its performance.

    Read the article

  • Prototype Fanless Heatsink Is Silent and Dust-Immune

    - by Jason Fitzpatrick
    What does this chip cooler do that your’s doesn’t? Run 30 times more efficiently, nearly silently, and repel any dust that settles on it, for starters. Check out the video to see it in action. Although the video is a bit dry the heatsink in action is pretty impressive–nearly silent? repels dust? radically more efficient? Our only complaint is we can’t slap one on a test machine right this minute. [via Extreme Tech] How to Make Your Laptop Choose a Wired Connection Instead of Wireless HTG Explains: What Is Two-Factor Authentication and Should I Be Using It? HTG Explains: What Is Windows RT and What Does It Mean To Me?

    Read the article

  • How to use the Netduino Go Piezo Buzzer Module

    - by Chris Hammond
    Originally posted on ChrisHammond.com Over the next couple of days people should be receiving their Netduino Go Piezo Buzzer Modules , at least if they have ordered them from Amazon. I was lucky enough to get mine very quickly from Amazon and put together a sample project the other night. This is by no means a complex project, and most of it is code from the public domain for projects based on the original Netduino. Project Overview So what does the project do? Essentially it plays 3 “tunes” that...(read more)

    Read the article

  • Disk failing on dell mini, are there diagnostic tools?

    - by John Lawrence Aspden
    Hi, my dell mini 10v running Ubuntu 10.10 runs ok for hours, but then will suddenly slow down drastically. Switching to a console shows lots of error messages, which also get into /var/log/syslog. These errors happen every couple of seconds. I'm figuring that the disk is failing, but is there anyway to be sure, and can laptop disks be replaced easily? Mar 20 11:08:12 dell-mini kernel: [ 2476.378774] ata1.00: status: { DRDY ERR } Mar 20 11:08:12 dell-mini kernel: [ 2476.378785] ata1.00: error: { UNC } Mar 20 11:08:12 dell-mini kernel: [ 2476.449841] ata1.00: configured for UDMA/133 Mar 20 11:08:12 dell-mini kernel: [ 2476.449887] ata1: EH complete Mar 20 11:08:14 dell-mini kernel: [ 2478.777754] ata1.00: exception Emask 0x0 SAct 0x0 SErr 0x0 action 0x0 Mar 20 11:08:14 dell-mini kernel: [ 2478.777976] ata1.00: BMDMA stat 0x24 Mar 20 11:08:14 dell-mini kernel: [ 2478.778059] ata1.00: failed command: READ DMA Mar 20 11:08:14 dell-mini kernel: [ 2478.778162] ata1.00: cmd c8/00:08:43:3b:97/00:00:00:00:00/e0 tag 0 dma 4096 in Mar 20 11:08:14 dell-mini kernel: [ 2478.778166] res 51/40:00:47:3b:97/00:00:00:00:00/00 Emask 0x9 (media error)

    Read the article

  • Erfolgreicher Start für Solution Center von Azlan

    - by A&C Redaktion
    Von links nach rechts: Rainer Hunkler, Hunkler GmbH & Co. KG / Birgit Nehring, Director Software & Solutions TDAzlan Am 11. Juni war es so weit: Der Distributor Tech Data Azlan eröffnete feierlich das zertifizierte Oracle Solutions Center (wir berichteten). Zugegen waren auch diverse Oracle Partner. Sie sind es, an die sich das neue Angebot vorrangig richtet: Das beeindruckend ausgestattete Oracle Authorized Solutions Center (OASC) steht Partnern künftig zur Verfügung, um vor allem Engineered Systems, aber auch Klassiker wie den Sparc-Server zu testen und ihren Kunden live vorzuführen. Unterstützt werden Interessierte dabei durch den Azlan-Consultant Ingo Frobenius und sein Team ausgewiesener Oracle Spezialisten. Es ist sogar möglich, die Systeme auszuleihen, wenn der Test in einer besonderen Umgebung erfolgen soll. Gemeinsam mit Birgit Nehring, Director Software und Solutions bei Azlan, feierten hochrangige Oracle Vertreter wie Christian Werner diesen Meilenstein für Oracle und Azlan. Einen ausführlichen Bericht von der Eröffnung mit Hintergründen zur Neuausrichtung im Channel-Business und der Oracle Strategie bezüglich Engineered Systems lesen Sie in der aktuellen Ausgabe der IT-Business unter der Überschrift „Azlan nimmt Demo-Center für Oracle Produkte in Betrieb“.

    Read the article

  • Can a Printer Print White?

    - by Jason Fitzpatrick
    The vast majority of the time we all print on white media: white paper, white cardstock, and other neutral white surfaces. But what about printing white? Can modern printers print white and if not, why not? Read on as we explore color theory, printer design choices, and why white is the foundation of the printing process. Today’s Question & Answer session comes to us courtesy of SuperUser—a subdivision of Stack Exchange, a community-driven grouping of Q&A web sites. Image by Coiote O.; available as wallpaper here. The Question SuperUser reader Curious_Kid is well, curious, about printers. He writes: I was reading about different color models, when this question hit my mind. Can the CMYK color model generate white color? Printers use CMYK color mode. What will happen if I try to print a white colored image (rabbit) on a black paper with my printer? Will I get any image on the paper? Does the CMYK color model have room for white? The Answer SuperUser contributor Darth Android offers some insight into the CMYK process: You will not get anything on the paper with a basic CMYK inkjet or laser printer. The CMYK color mixing is subtractive, meaning that it requires the base that is being colored to have all colors (i.e., White) So that it can create color variation through subtraction: White - Cyan - Yellow = Green White - Yellow - Magenta = Red White - Cyan - Magenta = Blue White is represented as 0 cyan, 0 yellow, 0 magenta, and 0 black – effectively, 0 ink for a printer that simply has those four cartridges. This works great when you have white media, as “printing no ink” simply leaves the white exposed, but as you can imagine, this doesn’t work for non-white media. If you don’t have a base color to subtract from (i.e., Black), then it doesn’t matter what you subtract from it, you still have the color Black. [But], as others are pointing out, there are special printers which can operate in the CMYW color space, or otherwise have a white ink or toner. These can be used to print light colors on top of dark or otherwise non-white media. You might also find my answer to a different question about color spaces helpful or informative. Given that the majority of printer media in the world is white and printing pure white on non-white colors is a specialty process, it’s no surprise that home and (most) commercial printers alike have no provision for it. Have something to add to the explanation? Sound off in the the comments. Want to read more answers from other tech-savvy Stack Exchange users? Check out the full discussion thread here.     

    Read the article

  • Important : Services Oracle Standard Installation (OSI) - Services de mise à niveau matérielle

    - by swalker
    Cette communication a pour objet de vous informer de mises à jour importantes concernant les Services Oracle Advanced Customer Support (ACS) Oracle Standard Installation (OSI). Oracle a le plaisir de vous annoncer l'introduction de nouvelles références OSI pour la commande de services d'installation packagés pour la mise à niveau de systèmes en place, notamment : des nouvelles mises à niveau de CPU (unités centrales), mémoires, cartes réseau, appliances de stockage et librairies de sauvegarde. Il est possible de commander des services d'installation OSI pour des mises à niveau matérielles comme suit : sur le point de vente matériel (POS) - via la procédure hors ligne pour les partenaires Matériels Oracle PartnerNetwork (OPN) avec des commandes indépendantes après la vente (APOS) - via la procédure OSI hors ligne du bureau de commandes des Services ACS. Ces procédures, ainsi que les fichiers de mappage des références OSI à jour, sont disponibles sur le site Oracle Partner Store (OPS). Les références OSI pour les mises à niveau matérielles pourront être commandées sur OPS fin 2011. Si vous avez des questions concernant cette mise à jour, veuillez contacter l'équipe Global Support Partner Operations à l'adresse [email protected].

    Read the article

  • Graphics card recommendation for dual-HD output?

    - by Graham
    I'm going for a dual-HD monitor setup (HDMI or DVI output), running Ubuntu 11.10 64-bit with Unity 3D. What graphics card / video card should I get? Requirements: Dual-monitor output for DVI (mixed-resolution: 1920x1080 and 1920x1200) Or dual-HDMI output, if it works with Ubuntu Smooth desktop compositing and (Chrome) browser and IDE window rendering At least 60fps on fullscreen glxgears (1920x1200 resolution) Supported and non-buggy behaviour in Unity 3D/Compiz Not looking to play games Smooth fullscreen video playback (just because)

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >