Search Results

Search found 22191 results on 888 pages for 'internet sharing'.

Page 42/888 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • When connected through a router, a new gateway appears, and I lose my internet connection.

    - by idan315
    I have two computers connected to a router, connected to my ADSL modem by PPPoE. One of those computrs use Windows XP, the other uses Windows 7. The computer using Windows 7 keeps getting limited or no connectivity, and I can't use it to connect to the internet. Connecting the computer to the modem without the router 'in the way' worked, and I was able to use the internet - which led me to believe that the problem is with my router. However, I have changed my router, and the problem persists. (Just to be clear: the computer using Windows XP can connect to the internet without any problem). This entire question is about the PC using Windows 7. The only symptom of this problem is that when I see my network devices, in addition to my router (which appears as "Network 4", or something of the sort), I also see an "Unidentified Network". When using ipconfig to check the problem, I see a second gateway, with the IP 0.0.0.0, in addition to the IP of my router.

    Read the article

  • Is it possible to combine two internet connections to increase performance?

    - by cornjuliox
    I've got a small home network, 3 PCs plus a laptop or two when the relatives come to visit, connected to a single cable internet connection. Now, as soon as everyone starts using the 'net the performance starts to suffer and if the load is heavy enough nobody can get anything done and everyone complains. At one point it was so bad that only one of us could use it at a time. I was researching possible solutions to this problem and I heard that internet cafes that utilize 2 internet connections, possibly from different providers, and have some sort of router that allows them to split the traffic between the both of them, with online games going through one and web traffic going through another. Is this possible? What is the technical term for it, and can/should it be applied to a home network setup or is there another solution to this problem?

    Read the article

  • Linux: set up media server to stream video via the Internet?

    - by Hassan
    How do I set up a media server in Linux which streams video over the internet? Is it easy to do this? I want a server that will actually encode video in real time to allow it to stream over sometimes slow or unreliable networks. Basically, I want a server that works on the internet. I have a directory with a bunch of video files, and want to make this accessible to myself remotely. For other situations, I found great and useful software (such as the PS3 media server). I'd like to find something equally as useful for streaming video over the internet.

    Read the article

  • Stop Windows Media Player from connecting to Internet/MS using hosts file or alternate method?

    - by Joe
    Is there a way to prevent Windows Media Player from connecting to the internet and MS using the hosts file or other methods? Edit: (Nov 20 2009 at 19:16) I have both VLC and MPC and I do use them. However I am currently using WMP to organize all my music and I hate that WMP is always making outgoing connections. I just tried TCPView and can't believe how many connections WMP makes when you first launch it. I have even disabled everything in its options that relates to connecting to internet. Could any of you recommend a good media player thats also good for organizing your music library like WMP, and doesnt connect to the internet? Preferably one that a WMP user would actually like as much as WMP. The reason I use WMP is because I like its interface, the way its setup and how it looks.

    Read the article

  • software to monitor internet usage on an XP PC? (browser + non-browser)

    - by user39316
    Hi Is there any (ideally open source) software for Windows that can be used on a PC, to monitor the usage of internet from that PC? It would need to include both browser and non-browser sources (e.g. a service that sync's calendar to gmail). So any software on your PC that uses would need to be configured to point to this local internet monitoring software/proxy. The monitoring software/proxy then would be configured to point to the company proxy server (address, port & credentials). Things that come to mind that might be close but not really focused on solving this might be perhaps: Charles Proxy, Fiddler 2, SQUID? The idea would be it could give you a daily/weekly/monthly report of internet upload/download usage on a per program/process/service basis for the PC it is being run on. thanks

    Read the article

  • Making A Photo-Sharing App For Android In Eclipse [on hold]

    - by user3694394
    I've only just started developing mobile apps, which is something that I've been wanting to learn for a while now. I'm from an indie games studio, making PC games for around the last 3 years, and I finally decided to move into android app development. The only problem I'm having is that I don't know where to start. The project which I'm aiming to create will be something similar to Instagram, basically a photo-sharing app which allows users to take new photos, or pull them from their device, and add filters to them, before posting them. I have a rough idea of how I could go about doing this, but I need pointing towards any tutorials available for each specific step. So, here's my idea: Create a UI in eclipse (this wont be a problem for me, I should be able to do this fine through xml files) Setup a server-side database to store all user info and uploaded images (the images will need to be converted into byte arrays, and I have no idea how to do this through a database). My best idea would be to use a MySQL database to do this. Add user interactions (likes, favourites, reposts, etc.). This would, again, have to be stored in the database (or, at least, i think it would). Add the ability to take new photos using the phone's camera (I can probably do this anyway, using the Camera API). Add the ability to pull existing photos from the device (again, pretty simple to do). Add the ability to add filters to any photos (I had a look around, and there are some repos and resources which allow you to do this, but they're mainly for iOS development). Add facebook/twitter integration (possibly) to allow phots to be shared to other social networks. Create a news feed which shows users all of the latest photos from their friends, and allows them to post their own images to it. Give all registered users their own wall/page which has their latest posts/images displayed on it. Add the ability to allow users to follow other users, and display their followed users posts on their news feed. Yep. It's not going to be easy, and I don't even know if it's possible for me to do alone in Eclipse. However, this is the plan, and I'm going to do my best to learn everything I need to know to do this successfully. My actual question would be how should I start doing this- where do I begin learning how to do all of this? I've had a look at snapify, which can be edited via Parse, but I won't be spending hundreds of dollars (since I'm 15 and just don't have the available funds) on software. I have extensive knowledge of Java (again, I've been making games for around 3 years, mainly in Java), and various scripting languages. So, hopefully, this will be of some use here. Thanks in advance, Josh.

    Read the article

  • Network config with pppoe and Ubuntu 13.10

    - by Pavel
    I have an internet connection that is using pppoe. In my windows I do not assign an ip address for my network and I am able to connect using password and username. I installed Ubintu 13.10 today, and I did pppoeconf, and I setup an ip/network mask and changed the mac address in the options, and I was able to connect to the Internet. I restarted the computer, and I got a message saying that the wired connection is not managed. Internet was not working. I went to network manager file, and I changed the option to true, but I still can't connect to the Internet. I am pretty new to linux. How can I get my Internet working? Thanks

    Read the article

  • How do I connect my Windows XP laptop to the internet?

    - by rubysiddhi
    Hello fellow super users, The Past I have a Acer Travelmate 2300 laptop running Windows XP. 6 months ago I moved into a new apartment and got a new internet connection set up. After getting an internet connection installed in my apartment I reinstalled Windows XP and at the same time wiped my drive clean losing all the original Acer software and drivers. Once XP was reinstalled I had to find all the drivers again to get the Travelmate laptop connected to the internet. So, using my Vista laptop which was connected fine, I went to the Acer Travelmate Series drivers download page to download the necessary drivers. I transferred them to my Acer XP machine and installed them the best I could (there were no easy instructions so I just had to find all the executables and run them). I eventually got connected to the internet but not exactly in the way I had hoped for. The Present To be connected to the internet I need to have an Ethernet cord connecting my computer (via the Ethernet port) to my router. This is a problem since it defeats the purpose of having a Wireless LAN card in my Acer laptop. One of the programs I downloaded from the Acer Travelmate Series page was the Acer Wireless LAN Configuration Utility. This program allows me to see the current network I am connected to and all the available networks I could potentially connect to. It reminds me of XP's Wireless Network Connection window/utility where you can see all available wireless networks, refresh the network list and connect to one of the networks. I should mention that my ISP set up a security enabled wireless network with WPA. This network requires a network key if you want to connect to it. I guess my Vista computer has the network key entered into it already. The problem is that I do not know what the network key is. Now obviously you would say just contact my ISP to get the key. And I will but there is just one extra weird issue. I am able to connect to another unsecured wireless network in the Wireless Network Connection window/utility. I can be on it as long as my Ethernet cable is plugged in. So this is not really wireless is it? And this indicates that even if I do get that network key password from my ISP, I will only solve one of the two problems I have. I will only solve being able to get online as long as I am connected to my router via the Ethernet cable. The Main Questions So how do I enable my acer IPN2220 Wireless LAN Card so that I can use my Acer laptop from anywhere with in my apartment? Or should I first get the network key from my ISP to access my security enabled wireless network? And then deal with getting the acer IPN2220 Wireless LAN Card working? Hard & Learned VS Easy & Stupid Of course contacting the ISP would be easier. Have em just come in here and do there thing. The problem with that is that they do not speak English (yeah, im in Poland) and it'd be a hell of a time trying to understand what they are doing (uncomfortable looking over their shoulder). Also, I want to learn how to do this task myself so that I can fix the problem if it ever happens again. You know, be more self sufficient. I look forward to helpful replies. Thanks, Xaviour

    Read the article

  • What is a good and safe way of sharing certificates?

    - by Kaustubh P
    I have a few certificates, that are used as authentication, to ssh into my servers on the Amazon cloud. I rotate those certificates weekly, manually. My question is, I need to share the certificates with some colleagues, a few on the LAN, and a few in another part of the country. What is the best practice to share the certificate? My initial thoughts were Dropbox and email. We dont host dedicated email servers with encryption and all, and dont have a VPN. Thanks.

    Read the article

  • Box.com file sharing - How are you managing concurrent document access and file locks? [closed]

    - by Matt
    My company is evaluating Box.com as a file server replacement. It's file locking behavior for concurrent access to files seems incomplete. Specifically, files are not locked* (either exclusive or read-only) when they are being edited by Office or similar programs. This inevitably results in multiple versions of documents as concurrent access results in change conflicts. *The exception is when the file is edited using Zoho Docs - perhaps other web-based office suites as well. Box provides multiple options for editing documents, including Google Docs, a local copy of Office or similar, Zoho Docs and others. If you are using Box how have you managed or worked around this behavior?

    Read the article

  • How do I set up a shared internet on a network using computer hooked up to a router

    - by Skadlig
    I got a wireless broadband modem (Huawei E1750) hooked up to my computer (call it A., running Windows-7) whose internet I wish to share to my other computer (call it B., also running Windows-7). A. is hooked up to my d-link DIR-600 router using a wired connection to port 1 on the router. B. is connected to the router using a wireless connection. Now I have tried setting up the sharing according to the help files for ICS but I have not been able to get it working. I suspect that there is something in my hardware configuration that is making it difficult. I would appreciate some tips and pointers as to what could be the reason to my problems.

    Read the article

  • Can I change the image associated with my computer when it's sharing as a media server?

    - by animuson
    I currently have my computer setup to share its videos, music, and pictures as a media server so I can easily access all of my stuff from my PS3 and play it on my TV (since I can't connect my computer directly to my TV). However, my dad also has his laptop setup as a media server, for whatever reason, and both of them use the same "Windows Media Player" icon in the list. It's not a huge issue, but I was wondering if it was possible to somehow change what icon gets sent out by your computer to other devices when it's acting as a media server, and how?

    Read the article

  • Online File Sharing that acts just like LAN shared drives, etc.

    - by Dayton Brown
    Hi All, Have a small business client that wants to move their current file share to the web. Specs are as follows, 20 to 30 GB of space, file sizes are normal (nothing more than 50 to 100 mb) 3 users ideal solution would be exact same functionality as windows explorer. CHEAP!!! But not super cheap. I would like to keep it around $20 per user per month. I've explored a bunch of solutions, but they are all a bit on the complicated side. Thanks in advance for the recommendations.

    Read the article

  • What should be monitored to troubleshoot file sharing problems?

    - by RyanW
    I'm running into some problems with a file share used by an ASP.NET web application. With this configuration, there are 2 web servers (win2k8 web) that connect to a file server (win2k8 enterprise), reading and writing files using a file share. Recently, one of the web servers has begun encountering an error accessing the file share: IOException: The specified network name is no longer available. There does not appear to be much info on the web for explaining what's causing this and how to best fix it, so I'm looking at what I can monitor in order to get clues. I'm not sure if it's hardware, just a load issue, file size, frequency, etc. With Windows perfmon, what can I monitor on the File Server side? There's the "Files Open" object, any other good ones? What can I monitor on the web server side? EDIT: I'll add that the UNC path uses the IP address of the file server, not a name to resolve. Also the share is a single, flat directory with over 100K files.

    Read the article

  • Where does the windows file sharing account info save to?

    - by Stan
    OS: windows server 2003 When open explore and enter \192.168.1.xxx\c$ and prompt to ask login id and password, where does this login info save to? And even if I choose not to save, seems the session will still remain until reboot? Can the community please suggestion some keyword to this and explain how it works a bit? Thanks.

    Read the article

  • Warning: Why your Internet might fail on May 5

    <b>IT News:</b> "On May 5, the world's top domain authorities (led by ICANN, the US Government and Verisign) will complete the first phase of the roll-out of DNSSEC (Domain Name System Security Extensions) across the 13 root servers that direct user requests to the relevant websites on the internet."

    Read the article

  • Warning: Why your Internet might fail on May 5

    <b>IT News:</b> "On May 5, the world's top domain authorities (led by ICANN, the US Government and Verisign) will complete the first phase of the roll-out of DNSSEC (Domain Name System Security Extensions) across the 13 root servers that direct user requests to the relevant websites on the internet."

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >