Search Results

Search found 32752 results on 1311 pages for 'multi line'.

Page 42/1311 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Multi-screen and Nvidia GT220

  - by Bohors

  Excuse me first for my broken English I have 3 monitors on two Nvidia GT220. Unity 2D works fine after using the proprietary drivers. But no way to use compiz effects. I'm on Ubuntu 11.10 (I also tested for curiosity 12.04 for the same result) I noticed in the "System Settings" / "details" that my graphics card is not recognized (graphics card "unknown") and "View" only returns me my first screen (with the correct resolution) also in unknown. $ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) 05:00.0 VGA compatible controller: NVIDIA Corporation GT216 [GeForce GT 220] (rev a2) xorg.conf : Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" Below "Screen0" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor1" VendorName "Unknown" ModelName "LG Electronics L1920P" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor2" VendorName "Unknown" ModelName "Acer V243HL" HorizSync 30.0 - 80.0 VertRefresh 55.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 0 EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 220" BusID "PCI:5:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "0" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "metamodes" "1920x1080_60_0 +0+0; nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "CRT: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "TwinView" "0" Option "metamodes" "DFP: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection Have you any idea? thanks

  Read the article

• MVVM for multi platforms

  How to implement MVVM when developing a view model which is view implementation language is not certain

  Read the article

• Cloudflare displaying cached CSS in-line?

  - by esqew

  I recently enabled CloudFlare on my domain, and when I make HTML statements like this: <link href="css/main.css" rel="stylesheet" /> The CSS gets displayed in-line, like this: <style>body{padding-top:40px}span.light{font-weight:lighter!important}span.title{font-size:60px;line-height:1;letter-spacing:-1px;color:inherit}</style> When I update the file via FTP, the changes are not reflected, which leads me to believe that this is a caching issue. Is this due to CloudFlare? If so, how do I disable the behavior? EDIT I also came to the conclusion that caching is behind the behavior after being able to see changes in the page after re-naming the CSS file.

  Read the article

• proper model for a multi site rails app

  - by JeffTaggarty

  Hi Guys, I am not sure if this is correct place to ask this question. My apologies if it is not. I need to create a web app where people will sign up, call it main-app.com, when they sign up my code will generate a usersite.my-app.com, they will login and only be able to manage their mini site. My question is, is it correct to model this out by creating a table for site, a table for user, users belong to site and site has many users. Then I should create a content table that belongs to user AND site? is that right? Thanks Jeff

  Read the article

• SQL Server 2008 R2 Multi-server Administration - A First Look

  One of the most useful new features of SQL 2008 R2 for DBA’s is the ability to manage and administer multiple instances of SQL Server from a central location using the new SQL Server Utility tool.

  Read the article

• Increase Site Traffic by Including Multi-language Content in Your Web Page

  Want to give your website a more broad appeal and increase readership? Who doesn't?! Your site could benefit by introducing some non-English material. Today's article will focus on various tools that you'll need to produce multilingual HTML documents.

  Read the article

• How can I designed multi-threaded application for larger user base

  - by rokonoid

  Here's my scenario, I need to develop a scalable application. My user base may be over 100K, every user has 10 or more small tasks. Tasks check every minute with a third party application through web services, retrieving data which is written in the database, then the data is forwarded to it's original destination. So here's the processing of a small task: while(true){ Boolean isNewInformationAvailable = checkWhetherInformationIsAvailableOrNot(); If(isNewInformationAvailable ==true){ fetchTheData(); writeToDatabase(); findTheDestination(); deliverTheData(); isAvailable =false; } } Here is the question: as the application is large, how should I approach designing this. I'm going to use Java to write it. Should I use concurrency, and how would you manage the concurrency?

  Read the article

• Single (class) Instances in Multi-tenant Web Application

  Need and implementation of single instance (class)

  Read the article

• How to Make Sample Login Multi Company in use mvc4 [closed]

  - by ksyahputra

  How to make for Login Company in use VS.2010 .Net and StoreProcedur TabelUserPayroll *UnitID *UserLogin *UserPassword *ActiveYN TabelUserPersmissions *UnitID *UserLogin *IPAddress *PermissionAccess *PermissionView *PermissionAdd *PermissionEdit *PermissionDelete *PermissionReports TabelMasterCompany *UnitID *UnitNameCompany *CurrencyID TabelHeader *UnitID *PurchaseNumber *Vendor *WareHouse *CurrencyID *Total TabelDetail *UnitID *PurchaseNumber *ItemID *Qty *Price

  Read the article

• Cloud consolidation handling multi databases

  - by llaszews

  I have spoken about virtualization and the different types of virtualization. Which includes OS zones, application server domains, database schemas, VLANS and other approaches. Another approach is to create a virtually federated database in the cloud. DBSpaces is a company that has a technology to created a virtually federated database in the cloud. DBSpaces is a Virtual Database technology that allows an organisation thru a single Virtual Database access multiple data sources (or database spaces) in real-time. Additionally dbSpaces can be configured to access an organisations data internally using a remote gateway so that their dbSpace is seamless across the Public and Private cloud.

  Read the article

• Advice on how to build html5 basic tile game (multi player, cross device)

  - by Eric

  I just read http://buildnewgames.com/real-time-multiplayer/ which explains the fundamentals and bets practices to build a massive real time multiplayer html5 game. My question is however given the “simplicity” of the game I need to build (simple kind of scratch game where you find or not something behind a tile), do I really need complex tools (canvas or node.js for example) ? The game The gamestakes place with a picture of our office as a background (tilemap). For HR purpose, we wish to create the following game fore employees: each day they can come to the website and click on a certain number of tiles (3 max per day) and find behind it motivation advice and interesting facts about the company. The constraints and rules the screen is divided into isometric 2D square tiles. There are basically an image (photograph of our office) number of tiles on the screen game: about 10,000 to much more (with scroll , see below) the players can scroll in 4 directions there are only 2 types of tiles: already open and closed player can open tiles that have not been yet open by other players there is no path for players : any player can click on any tile on the screen at any moment (if it’s not already done by another player) 2 players can’t be on the same tile at the same moment (or if they can, I’ll have to manage to see which one clicked on it first) only one type of player (all with similar roles), no weapon, no internal score… very simple game. no complex physics (collision only occurs if 2 players are on the same tile) The target I need to achieve: cross device, cross browsers high performance reaction (subsecond reactions) average nb of players per hour: up to 10K players per hour (quite high indeed but it’s because we aim at proving our case for the game to our business unit) So what I would like to know: 2D Tiled map: Do I need tiledmapeditor or can I enable me split the screen like here ? should I use canvas or plain html/css could be sufficient for my need? do I need a game engine/framework such as melon.js or crafty./js ? (even if the game play is extremely basic, I do need mouse and touché device support, mouse emulations on touch devices…) or ca I easily/quickly do it without? for my constraints and targets, should I use CPU acceleration ? for my constraints and targets, should I use web workers ? for the database, for a massively real time game should I avoid to put the current locations of player in MySQL as i feel it might slow me down. What kind of DB should I implement ? Thanks for your help !

  Read the article

• Vlc And other Multi Media Problems

  - by MrMagu

  ive tried numerous Free Multimedia Programs on ubuntu and i get the same result when i go to watch one of my movies off my other hardrive it allways ends up full screening with a stuck image in the middle and vlc ends up looking pitch black. ive look all over the web for this issue im wondering if anyone is experinceing the same problems I Dont know if it has to do with the duel monitors ive tried adding and re adding the repositorys but it seems to be doing the same repetive thing for over a month now do i need to reinstall the whole system or what idk anyhelp please would be much appreciated Ty MrMagu Xorg Conf File nvidia-settings: X configuration file generated by nvidia-settings nvidia-settings: version 304.37 (buildd@allspice) Sun Sep 9 05:59:26 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Ancor Communications Inc VE247" HorizSync 30.0 - 83.0 VertRefresh 50.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro FX 1500" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: 1920x1080 +1920+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select @1920x720 +0+0" Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: 1920x1080 +0+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-0" Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-1: 1920x1080 +1920+0; DFP-0: 1920x1080 +0+0, DFP-1: nvidia-auto-select +1920+0; DFP-0: 1920x1080_60 +0+0; DFP-0: 1680x1050 +0+0; DFP-0: 1680x1050_60 +0+0; DFP-0: 1440x900 +0+0; DFP-0: 1440x900_60 +0+0; DFP-0: 1280x1024 +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1280x1024_60 +0+0; DFP-0: 1280x960 +0+0; DFP-0: 1280x960_60 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1152x864_75 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_75 +0+0; DFP-0: 1024x768_70 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_75 +0+0; DFP-0: 800x600_72 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 800x600_56 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_75 +0+0; DFP-0: 640x480_72 +0+0; DFP-0: 640x480_60 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-1: 1920x1080 +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "InputClass" Identifier "Mouse Remap" MatchProduct "Saitek Cyborg R.A.T.7 Mouse" MatchDevicePath "/dev/input/event*" Option "ButtonMapping" "1 2 3 4 5 6 7 8 9 0 0 0 0 0 0" EndSection Pictures http://tinypic.com/r/34o7j1h/6 http://tinypic.com/r/3rn20/6 Ty so Much Mr Magu

  Read the article

• multi-thread in mmorpg server

  - by jean

  For MMORPG, there is a tick function to update every object's state in a map. The function was triggered by a timer in fixed interval. So each map's update can be dispatch to different thread. At other side, server handle player incoming package have its own threads also: I/O threads. Generally, the handler of the corresponding incoming package run in I/O threads. So there is a problem: thread synchronization. I have consider two methods: Synchronize with mutex. I/O thread lock a mutex before execute handler function and map thread lock same mutex before it execute map's update. Execute all handler functions in map's thread, I/O thread only queue the incoming handler and let map thread to pop the queue then call handler function. These two have a disadvantage: delay. For method 1, if the map's tick function is running, then all clients' request need to waiting the lock release. For method 2, if map's tick function is running, all clients' request need to waiting for next tick to be handle. Of course, there is another method: add lock to functions that use data which will be accessed both in I/O thread & map thread. But this is hard to maintain and easy to goes incorrect. It needs carefully check all variables whether or not accessed by both two kinds thread. My problem is: is there better way to do this? Notice that I said map is logic concept means no interactions can happen between two map except transport. I/O thread means thread in 3rd part network lib which used to handle client request.

  Read the article

• Installing multi-boot Linux system

  - by user94924

  I have a dual (XP/Linux) boot Compaq Presario S4500UK with a couple of spare partitions on the boot drive which I want to use for testing different Linux distros/configs before installing them on "live" machines. I tried this with Oneiric which worked fine until I came to uninstalling the test system. Fortunately Oneiric uses Grub2 and so redirecting the bootloader to work from the original Linux partition was a piece of cake - if a bit annoying. I now need to do some tests on Hardy and DSL (Damned Small Linux), neither of which use Grub2. Question: Is it possible to install a test operating system without adding/replacing the bootloader (ie so I can still use Grub2 from the original partition with its nice interface and recovery facilities)? Is there another way of uninstalling/decommisioning a test OS which doesn't trash the boot loader? (The only way I know to do this is by deleting/reformatting the partition which takes with it the bootloader which is in that partition). Any help would be much appreciated. Tks jg1

  Read the article

• Multi Level Security via Roles

  - by Geertjan

  I'm simulating a small scenario: Users can be dragged into roles; roles can be dragged into role groups. When a drop is made into a role group, a new role is created (WindowManager.getDefault().setRole("")). Then, when the user logs in, they log into a particular role. Depending on the role they log into, a different role group is assigned, which maps to a certain "role" in NetBeans Platform terms, i.e., the related level of security is applied and the related windows open.

  Read the article

• Flikering line on top of display

  - by jaskaran

  I just bought a new Dell Inspiron pre-installed with Ubuntu 11.10. All was fine until I updated the OS. Since then, I have this flickering line at the top of my screen and it won't go after rebooting or changing the screen resolution. It gets really annoying. I don't know which update did this. I tried reinstalling the image from Dell, and it worked fine until I applied the updates. I tried to take a screen shot but it does not show. The line seems to be outside the desktop area. Help please... Thanks!

  Read the article

• Multi threading to execute multiple makefiles

  - by user105205

  The problem is it takes lot of time(20-30 minutes) to build our application. There are around 5000+ files and the code is divided into various subsystems, which can be built independently. Each subsystem has its own makefile. My question is: Is it possible to create a thread for each makefile so that all the subsystems are built in parallel and subsequently run a makefile to merge them all? If it is possible, how to proceed about it?

  Read the article

• SQL Server 2008 R2 Multi-server Administration - A First Look

  One of the most useful new features of SQL 2008 R2 for DBA’s is the ability to manage and administer multiple instances of SQL Server from a central location using the new SQL Server Utility tool. SQL Server ... [Read Full Article]

  Read the article

• C#/.NET Command Line Argument Parser Reloaded

  Easy to use yet powerful command line argument parser, which also creates usage and parameter information for the user.

  Read the article

• Scalability of multi-threading in game server

  - by Taylor Hill

  What is a reasonable number of threads for a simple 2D mmo in Java? Is it reasonable to have two threads per connection, one for the input stream and one for the output stream? The reason I ask is because I use a blocking method on the input stream, and a workaround seems unnecessarily complex if I were to try to get around it without adding threads. This is mostly for my own edification; I don't expect to have 5 million people playing it ever, or even 5, but I'm wondering what a good scalable solution is, and if this is reasonable for a small server (<30 connections).

  Read the article

• How can I design multi-threaded application for larger user base

  - by rokonoid

  Here's my scenario, I need to develop a scalable application. My user base may be over 100K, every user has 10 or more small tasks. Tasks check every minute with a third party application through web services, retrieving data which is written in the database, then the data is forwarded to it's original destination. So here's the processing of a small task: while(true){ Boolean isNewInformationAvailable = checkWhetherInformationIsAvailableOrNot(); If(isNewInformationAvailable ==true){ fetchTheData(); writeToDatabase(); findTheDestination(); deliverTheData(); isAvailable =false; } } As the application is large, how should I approach designing this? I'm going to use Java to write it. Should I use concurrency, and how would you manage the concurrency?

  Read the article

• Journey into Multi Threading

  Threading tutorial and examples for beginners.

  Read the article

• Parallel Threading in Multi-Language Software?

  - by Smarty Twiti

  I'm developing a software that contain many modules/Daemon running in parallel manner, what i'm looking for is how to implement that, i cannot use Thread because some of those modules/Daemon are perhaps implemented in other languages (C,java,C#...). For example I'm using C for Hooking Messages exchanged between Windows kernel and top level applications, Java/C# to use some free library to simply parse XML(for example) or to accept and execute commands over the network..this can be done by C Language but just to improve productivity... Finally for GUI I'm using Ultimate++ (c++) that is like the main process that call and monitor(activate/deactivate/get state) of all other modules/Daemon through an interface. I admit that the development of each module/Daemon in a separate language greatly facilitates maintenance, but especially I am obliged to do that.. What is the best practice way to do that ? All helps will be appreciated.

  Read the article

• Why do packages fail to install from command line

  - by calebB

  Every once in a while I can't install packages in Ubuntu 11.04. I'll try to run the software center and it and it will pop up then disappear. If I call it from the command line it says it seg-faults. And then trying to install anything from the command line I get this: sudo apt-get install pdftk Reading package lists... Done And thats all I get for anything I try. Usually restarting fixes the problem but its very annoying.

  Read the article

• How to Use the New Visual Studio 2010 Multi-Targeting

  Working on code for projects created in different releases of Visual Studio used to be a big hassle. Visual Studio 2010 improves this and lets you specify the version of the .NET framework and work in its interface while you’re developing in the VS IDE. Click now!

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >