Search Results

Search found 22277 results on 892 pages for 'multiple addresses'.

Page 42/892 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Enabling "AllowDualLinkModes" in xorg.conf

  - by Gausie

  I'm using a GeForce GT 620 (which is dual-link compatable) and a DVI-I dual-link splitter to try to have a desktop extended onto two monitors. At the moment when I plug in the monitors, only the monitor on the female VGA marked "1" gets a signal, and the other screen gets nothing and only one screen is detected by nvidia-settings. After reading around, I have realised that my graphics card probably comes with dual-link disabled by default, and I can enable it by adding an "AllowDualLinkModes" option to my xorg.conf. This is the current state of my xorg.conf Section "Device" Identifier "Default Device" Option "NoLogo" "True" EndSection Where do I put the line about AllowDualLinkModes? Do I create a new Section? Have I misunderstood? Cheers Gausie

  Read the article

• Unity 3D (with Nvidia driver) becomes very slow and laggy

  - by Graham

  How can I prevent my Unity 3D desktop from becoming slow after a while, given that I have an Nvidia Quadro NVS 290 graphics in TwinView mode? The desktop starts out fast on login, but becomes slow / lagging / hesitant / high latency after a while, symptoms being spikes in CPU usage by /usr/bin/X whenever I cause any graphical activity with the mouse or keyboard (e.g. typing, changing tabs, dragging windows). The desktop remains slow even with all windows (except htop in Terminal) and extraneous processes killed. Detail: Changing tabs in Terminal takes about a second, and X spikes to 76% CPU. As I type into Firefox, X spikes to 95% CPU. Dragging Termiinal window, X goes to 70% CPU. Basically, every graphical action sends CPU usage of X through the roof. Device: Nvidia Quadro NVS 290 Driver package: binary driver nvidia-current-updates (280.13-0ubuntu5) Dual Monitors: Pair of DELL UltraSharp 1908FP in TwinView (X screen 2560x1024) OS: Fresh install of Ubuntu 11.10 amd64 Desktop with all updates. Hardware: Dell Precision T5400 Workstation Pastebin of Xorg.0.log Pastebin of xorg.conf Pastebin of nvidia-xconfig -t output (easier to read than xorg.conf) Output of /usr/lib/nux/unity_support_test -p: To obtain the following htop screenshow I typed "asdf" several times in in this text box, alt-tabbed to Terminal and took a screenshot of the high X CPU usage. This also happens when firefox is not running: Quadro NVS 290 has "No" thermal sensor according to sensors-detect: Next adapter: NVIDIA i2c adapter 0 at 2:00.0 (i2c-0) Do you want to scan it? (YES/no/selectively): Client found at address 0x50 Probing for `Analog Devices ADM1033'... No Probing for `Analog Devices ADM1034'... No P robing for `SPD EEPROM'... No Probing for `EDID EEPROM'... Yes (confidence 8, not a hardware monitoring chip) I tried the nouveau driver by disabling the nvidia-current-updates under Additional Drivers, but Ubuntu and xrandr -q fail to detect the second monitor. This may be issue 737349. Funniest thing is that Nouveau wiki says that XRandR 1.2 dual-monitor is supported so it should work with a second monitor.

  Read the article

• How to set resolution higher than maximum shown?

  - by Olivier Lalonde

  I just bought an external monitor for my laptop (Asus VH242H) but cannot set its resolution to anything higher than 1600x900. I tried both from System/Administration/Monitors and the ATI Catalyst Control Center. There was a CD that came with the monitor but it only contains a Windows installer. According to the monitor's specifications: 23.6” 16:9 widescreen with 1920×1080 resolution enables borderless Full HD 1080p full-screen video display. My graphic card is an ATI Mobility Radeon HD 4670 and the monitor is currently connected to my laptop with a VGA cable. How can I set my external monitor to its maximum resolution?

  Read the article

• Windows expand over 2 monitors in quad-monitor setup

  - by Martin

  i just installed ubuntu 11.10 with my previous hardware setup: 4 monitors and 2 identical nvidia graphic cards. draging windows around all 4 monitors works nice, but when i maximize a window it expand always over 2 screens. (2x twinview). i had an workaround for this in 11.04 but cant remember what it was... may one of you guys have quad monitors up and running with window maximizing on only one screen my xorg.conf looks like this: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 280.13 (buildd@allspice) Thu Aug 11 20:54:45 UTC 2011 # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 280.13 ([email protected]) Wed Jul 27 17:15:58 PDT 2011 Section "ServerLayout" # Removed Option "Xinerama" "1" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" 0 1080 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Unknown" ModelName "Samsung SMB2220N" HorizSync 31.0 - 80.0 VertRefresh 56.0 - 75.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:2:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 550 Ti" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "TwinView" "True" # Removed Option "MetaModes" "nvidia-auto-select, nvidia-auto-select" # Removed Option "metamodes" "CRT-0: nvidia-auto-select 1920x1080 +0+0, CRT-1: nvidia-auto-select 1920x1080 +1920+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "CRT-0" Option "metamodes" "CRT-0: nvidia-auto-select +0+0, CRT-1: nvidia-auto-select +1920+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

• How to set default xrandr settings?

  - by echo-flow

  I'm trying to enable dual monitors in Ubuntu. This is working fine, but every time I do it, desktop effects is disabled. I think I've found the reason why, though: https://wiki.ubuntu.com/X/Config/Multihead/ As with the GNOME XRandR configuration method, setting Virtual to too large a value may result in a loss of hardware acceleration, and thus an inability to use Compiz and its desktop effects. When I use the GNOME monitor applet, or the Monitors configuration in the System menu, the default xrandr settings puts the second monitor to the right of the first, and, as I found with this bug, for most monitors this creates a virtual desktop larger than the maximum 2048 horizontal resolution needed for hardware acceleration on my netbook hardware. So, it seems like if I can modify xrandr's default settings so that it places the new desktop above or below (north or south of) the main LVDS display, then hardware acceleration, and therefore compiz will continue to work. Can anyone tell me, what is the easiest way to achieve this? UPDATE: I have confirmed that multihead support with desktop effects and hardware acceleration works when I move the external monitor display north of the main LVDS display. Right now this involves the following process: plugging in the external monitor, starting the Monitors configuration menu, desktop effects are disabled automatically (and all of the windows on my workspaces are moved to the first workspace), repositioning the external display so that it is north of LVDS display and clicking apply, and then navigating to the Appearance menu and telling it to reenable desktop effects. Is there a simpler way do this? UPDATE 2: OK, so I thought that perhaps the GNOME Monitors configuration screen was trying to be clever, and might be disbling desktop effects. So, I just tried using the xrandr command-line client instead, as follows: xrandr --output VGA1 --above LVDS1 When I do that, desktop effects are still disabled, and I need to manually reenable them. This, despite the fact that hardware acceleration works, and there is never a point where hardware acceleration stops working because the horizontal dimension of the virtual display is too large. So what program is trying to be clever, and is turning off desktop effects when it doesn't need to? And how do I make it stop? If there were a way to re-enable desktop effects from the command line, which I could then put into a script along with the proper xrandr invocation, I would accept that as a workaround. UPDATE 3: OK, here's my script to enable a second monitor with desktop effects. It might be evil, I'm not sure: second-monitor.sh xrandr --output VGA1 --above LVDS1 sleep 3 compiz --replace & The sleep statement might not be necessary. If there's a better way to do this, please let me know. UPDATE 4: This is a Dell Mini Inspiron 1012. Here are my system specifications: lspci -vv 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f0b00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 18d0 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0900000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0b80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> lsmod | grep i915 i915 287458 2 drm_kms_helper 29329 1 i915 drm 162409 3 i915,drm_kms_helper intel_agp 24375 2 i915 i2c_algo_bit 5028 1 i915 video 17375 1 i915

  Read the article

• Graphics card recommendation for dual-HD output?

  - by Graham

  I'm going for a dual-HD monitor setup (HDMI or DVI output), running Ubuntu 11.10 64-bit with Unity 3D. What graphics card / video card should I get? Requirements: Dual-monitor output for DVI (mixed-resolution: 1920x1080 and 1920x1200) Or dual-HDMI output, if it works with Ubuntu Smooth desktop compositing and (Chrome) browser and IDE window rendering At least 60fps on fullscreen glxgears (1920x1200 resolution) Supported and non-buggy behaviour in Unity 3D/Compiz Not looking to play games Smooth fullscreen video playback (just because)

  Read the article

• Windows being placed on wrong monitor

  - by osarusan

  I'm running a fresh install of Ubuntu 12.04x64 (ATI Radeon HD4770 with open source drivers) and I am having trouble getting windows to appear on the right screen. Yesterday I plugged in my secondary monitor and it worked perfectly out of the box, except that for some reason, compiz wants to place windows on the secondary monitor rather than the first. This is a problem because I don't use the secondary monitor 100% of the time, and I don't want windows being placed on it when it is off. Also, it's only some windows that are getting placed there. For example, the "Edit Connections" window from the networking menu is always placed off my primary screen. There are a number of other windows that do the same. While some, like nautilus, always appear on the proper monitor. I played around with Compiz Config Settings Manager and found that if I disable the "Place Windows" plugin, all of the windows appear on the proper monitor -- except that they are placed underneath the Unity Panel, so I have to alt-drag them out each time in order to use them. With out without that plugin, I can't seem to get a sensible setup. The windows are supposed to appear only on the active display, but for some reason Compiz doesn't want to do that with some windows. Does anyone know a fix for this? I'd rather not have to disable and re-enable my monitor every single time I use it...

  Read the article

• Use 3 monitors w/built-in intel adapter + two old nvidia PCI cards on 10.10?

  - by Kendall Gifford

  I'd like to move from windows with my current workstation. The only thing holding me back is that I have 3 monitors connected to the system and I really take advantage of the real estate when working. I just installed Ubuntu 10.10 on the system and one of the monitors is up and running just fine. This monitor is connected to the built-in Intel adapter. I also have two old nVidia GeForce4 MX 4000 (nv19pl) cards in my two PCI slots with two monitors connected to them respectively. I installed the legacy (and proprietary) nVidia drivers (the nvidia-96 package) that claims to support these old cards. Now the question is how to get X configured to use all adapters (using two different drivers) so I can use all three monitors (and is this even possible)? From what I've read, it looks like I'll have to write an xorg.conf file since the nVidia driver doesn't support the auto-magic configuration supported by other drivers. On this site: http://wiki.ubuntu.com/X/Config it says that on 10.10 I just need to write an xorg.conf "containing only those sections and options that you need to override Xorg's autoconfigurated settings". So, does this mean I can get away with only including the nVidia-specific configuration stuff and all else will get auto-configured? Or, will providing a config with a "Device" section overrule the auto-magic from detecting/using the Intel adapter? I ran the included nvidia-xconfig to generate a basic, nVidia-specific xorg.conf but I'm hesitant to reboot with it in place, suspecting I'll have a screwed up display. Also, is there any way (any tool or command) to generate an xorg.conf from the current, auto-configured running state of an X session? If I have to write a full, complete config, I'd rather start with one that includes everything that's been auto-detected thus far (and merge it with my nVidia version). Anyhow, any info and thoughts are greatly appreciated (as are answers).

  Read the article

• Laptop screen blank after login when external monitor is not connected

  - by Ramon Suarez

  Ubuntu does not switch back automatically to only monitor present when booting after disconnecting external monitor. Here's a video showing what happens. I get to the login window and everything looks ok, then I type my password, the desktop image shows up and... everything goes blank. It does not happen when I just login as a guest. When possible I work with my laptop connected to an external screen via the VGA port. The problem comes when I boot the computer without that secondary screen connected: The login screen comes out ok. After login the screen goes black, but I can hear the login sound. If I hit ctr + alt + backwards-delete and login again sometimes it is fixed, but not all. If I log in as a different user everything is OK. Then I log in as my user and sometimes it works. To have a screen I have to plug a monitor. Although I have turned on the laptop display with that monitor on, if I reboot it goes blank again after login, even if I turn off the external monitor before turning off the computer. I've managed to get my screen back with my username after going into recovery mode, but only sometimes. Failsafe would not load after second screen asking me what I wanted to do (no mouse to click nor keyboard working). My computer is a LDLC Aurore BB1-i5 -8 -S1. Which is the configuration file that keeps the information about the monitors using Displays under lightgdm and where is it? I guess if I could edit it I may have a chance :) One of the things I tried following a solution in another post was removing my monitors.xml file, but it does not work and I don't know how to create a good one that I could use now. When doing DISPLAY=:0 xrandrI get: Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis) This is the full dmesg after activating sudo xdiagnoseas Bryce sugested. (If you tell me the relevant parts I will paste them here) When conecting the external monitor, only the external will work, although I can see using Displays that the computer thinks that both are working. I've asked the question in Launchpad but have it keeps on expiring without any feedback. In my opinion Ubuntu should be able to detect automatically that there is no external monitor present and switch to the laptop monitor. There's a similar question here, but it does not apply to my case External monitor set as primary even when disconnected from laptop Update: For clarification, the problem happens only with my user and once I log in. I even get to see the screensaver for about a second, and then it goes blank. Tried Bryce's example (see his answer below), but it did not work. This is the info I get from tty1 with Display=:0 xrandr: – Ramon Suarez Jul 9 at 16:36 Screen 0: minimum 320 x 200, current 320 x 200, maximum 8192 x 8192 LVDS1 connected (normal left inverted right x axis y axis) 1366x768 60.0 + 1360x768 59.8 60.0 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 disconnected (normal left inverted right x axis y axis) HDMI1 disconnected (normal left inverted right x axis y axis) DP1 disconnected (normal left inverted right x axis y axis)

  Read the article

• Make one monitor act like two, split in half

  - by Nathan J. Brauer

  Context: Ubuntu 11.10, Unity Let's say I have a screen at resolution 1000x500. What I'd like to do is split the screen down the middle so [Unity or X or ?] acts as if there are two displays (each of 500x500). Examples: Unity will display a different toolbar (the top one) on each side of the display. If I maximize a window on the left side of the screen, it will fill the left side only. If I maximize on the right, it will fill the right. If I hit "fullscreen" in youtube (flash) or Chrome or Movie Player, it will only fill the side of the display that it's on. If it's really is impossible to do this with Unity, will it work with Gnome3 and how? A million thanks!

  Read the article

• Have programmers at your work not taken up or been averse to an offer of a second monitor?

  - by Chris Knight

  I'm putting together a business case for the developers in my company to get a second monitor. After my own experiences and research, this seems a no-brainer to me in terms of increasing productivity and morale/happiness. One question which has niggled me is if I should be pushing to get all developers onto a second monitor or let folk opt-in (i.e. they get one if they want one). Thoughts on this are welcome, but my specific question relates to a snippet on this site: But when the IT manager at Thibeault's company asked other employees if they wanted dual monitors last year, few jumped at the offer. Blinded by my own pre-judgement, this surprised me. Has anyone else experienced this? I fully appreciate that some people prefer a single larger monitor, but my general experience of researching the web suggests that most programmers prefer a dual (or more) setup. I'm guessing this should be tempered with the thought that those developers who contribute to such discussions might not be considered your average developer who might not care one way or the other. Anyway, if you have experienced the above have you tried to sell the concept of dual monitors to the masses? If everyone just got 2 monitors regardless if they wanted it or not, were there adverse reactions or negative effects? UPDATE: The developers are on a mixture of 17", 22", or 24" single monitors. The desks should be able to accommodate dual 22" monitors as I am proposing, though this will take some getting used to I imagine.

  Read the article

• NVIDIA x server - "sudo nvidia config" does not generate a working 'xorg.config'

  - by Mike

  I am over 18 hours deep on this challenge. I got to this point and am stuck. very stuck. Maybe you can figure it out? Ubuntu Version 12.04 LTS with all the updates installed. Problem: The default settings in "etc/X11/xorg.conf" that are generated by the "nvidia-xconfig" tool, do not allow the NVIDIA x server to connect to the driver in my "System Settings Additional Driver window". (that's how I understand it. Lots of information below). Symptoms of Problem "System Settings Additional Driver" window has drivers, but the nvidia x server cannot connect/utilize any of the 4 drivers. the drivers are activated, but not in use. When I go to "System Tools Administration NVIDIA x server settings" I get an error that basically tells me to create a default file to initialize the NVIDIA X server (screen shot below). This is the messages the terminal gives after running a "sudo nvidia-xconfig" command for the first time. It seems that the generated file by the tool i just ran is generating a bad/unusable file: If I run the "sudo nvidia-xconfig" command again, I wont get an error the second time. However when I reboot, the default file that is generated (etc/X11/xorg.conf) simply puts the screen resolution at 800 x 600 (or something big like that). When I try to go to NVIDIA x server settings I am greeted with the same screen as the screen shot as in symptom 2 (no option to change the resolution). If I try to go to "system settings display" there are no other resolutions to choose from. At this point I must delete the newly minted "xorg.conf" and reinstate the original in its place. Here are the contents of the "xorg.conf" that is generated first (the one missing required information): # nvidia-xconfig: X configuration file generated by nvidia-xconfig # nvidia-xconfig: version 304.88 (buildmeister@swio-display-x86-rhel47-06) Wed Mar 27 15:32:58 PDT 2013 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Unknown" ModelName "Unknown" HorizSync 28.0 - 33.0 VertRefresh 43.0 - 72.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Hardware: I ran the "lspci|grep VGA". There results are: 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: NVIDIA Corporation GF108 [Quadro 1000M] (rev a1) More Hardware info: Ram: 16GB CPU: Intel Core i7-2720QM @2.2GHz * 8 Other: 64 bit. This is a triple boot computer and not a VM. Attempts With Not Success on My End: 1) Tried to append the "xorg.conf" with what I perceive is missing information and obviously it didn't fly. 2) All the other stuff I tried got me to this point. 3) See if this link is helpful to you (I barely get it, but i get enough knowing that a smarter person might find this useful): http://manpages.ubuntu.com/manpages/lucid/man1/nvidia-xconfig.1.html 4) I am completely new to Linux (40 hours over past week), but not to programming. However I am very serious about changing over to Linux. When you respond (I hope someone responds...) please respond in a way that a person new to Linux can understand. 5) By the way, the reason I am in this mess is because I MUST have a second monitor running from my laptop, and "System Settings Display" doesn't recognize my second display. I know it is possible to make the second display work in my system, because when I boot from the install CD, I perform work on the native laptop monitor, but the second monitor shows a purple screen with Ubuntu in the middle, so I know the VGA port is sending a signal out. If this is too much for you to tackle please suggest an alternative method to get a second display. I don't want to go to windows but I cannot have a single display. I am really fudged here. I hope some smart person can help. Thanks in advance. Mike. **********************EDIT #1********************** More Details About Graphics Card I was asked "which brand of nvidia-card do you have exactly?" Here is what I did to provide more info (maybe relevant, maybe not, but here is everything): 1) Took my Lenovo W520 right apart to see if there is an identifier on the actual card. However I realized that if I get deep enough to take a look, the laptop "won't like it". so I put it back together. Figuring out the card this way is not an option for me right now. 2) (My computer is triple boot) I logged into Win7 and ran 'dxdiag' command. here is the screen shot: 3) I tried to look on the lenovo website for more details... but no luck. I took a look at my receipts and here is info form receipt: System Unit: W520 NVIDIA Quadro 1000M 2GB 4) In win7 I went to the NVIDIA website and used the option to have my card 'scanned' by a Java applet to determine the latest update for my card. I tried the same with Ubuntu but I can't get the applet to run. Here is the recommended driver from from the NVIDIA Applet for my card for Win7 (I hope this shines some light on the specifics of the card): Quadro/NVS/Tesla/GRID Desktop Driver Release R319 Version: 320.00 WHQL Release Date: 3.5.2013 5) Also I went on the NVIDIA driver search and looked through every possible combination of product type + product series + product to find all the combinations that yield a 1000M card. My card is: Product Type: Quadro Product Series: Quadro Series (Notebooks) Product: 1000M ***********************EDIT #2******************* Additional Symptoms Another question that generated more symptoms I previously didn't mention was: "After generating xorg.conf by nvidia-xconfig, go to additional drivers, do you see nvidia-304?" 1) I took a screen shot of the "additional drivers" right after generating xorg.conf by nvidia-xconfig. Here it is: 2) Then I did a reboot. Now Ubuntu is 600 x 800 resolution. When I logged in after the computer came up I got an error (which I always get after generating xorg.conf by nvidia-xconfig and rebooting) 3) To finally answer the question - No. There is no "NVIDIA-304" driver. Screen shot of additional drivers after generating xorg.conf by nvidia-xconfig and rebooting : At this point I revert to the original xorg.conf and delete the xorg.conf generated by Nvidia.

  Read the article

• HTML Parsing for multiple input files using java code [closed]

  - by mkp

  FileReader f0 = new FileReader("123.html"); StringBuilder sb = new StringBuilder(); BufferedReader br = new BufferedReader(f0); while((temp1=br.readLine())!=null) { sb.append(temp1); } String para = sb.toString().replaceAll("<br>","\n"); String textonly = Jsoup.parse(para).text(); System.out.println(textonly); FileWriter f1=new FileWriter("123.txt"); char buf1[] = new char[textonly.length()]; textonly.getChars(0,textonly.length(),buf1,0); for(i=0;i<buf1.length;i++) { if(buf1[i]=='\n') f1.write("\r\n"); f1.write(buf1[i]); } I've this code but it is taking only one file at a time. I want to select multiple files. I've 2000 files and I've given them numbering name from 1 to 2000 as "1.html". So I want to give for loop like for(i=1;i<=2000;i++) and after executing separate txt file should be generated.

  Read the article

• gnome-shell failed to launch when dual monitor detected, nvidia card

  - by Terry Hu

  I installed a clean precise. I like gnome-shell so I installed it. It worked well with single monitor. But It does not work well when I go to office, plug my external monitor onto my laptop. I am using nvidia driver. Another colleague is using the same laptop, he can work well with dual monitors. His laptop is ATI graphic card. When I plug my extended monitor cable, I choose GNOME, but actually it goes to gnome 2 classic desktop environment, not GNOME 3. When I disconnect the extended monitor, restart X, I can login with GNOME3. Do I have to choose between GNOME3 and extended monitor? It's a hard choose.

  Read the article

• Dual Monitor results in 'greyed' windows

  - by paula

  This occurs in Maverick and Natty. Single screen is fine, mirror of single screen is fine. If the mirror box is unchecked and the second monitor is turned on to extend the desktop then all windows are greyed out (like they do when a process has timed out and is unresponsive) and pop up menus are greyed out but icons, panels and background are fine and the windows do operate (just can't see them well enough to use) I have a D620 with intel graphics. This machine did work with dual monitors at some time in the past, however I have been using another machine, a D630 with nvidia and it works fine. Yes, there have been any number of updates. I also upgraded from Maverick to Natty to see if it would go away. No joy. Also, the D620 has a dual boot windows system and the windows xp system works fine with daul monitors There is a forum thread that goes into more detail and there are a number of users experiencing this problem. Thread: greyed out windows Thanks for reading paula_ke

  Read the article

• Screen lock broken when using separate x screens

  - by Wolf

  For some reason, the screen lock appears to be broken when I use separate x screens (it works fine if I use twin view or just one monitor, though). If I wait for the screen to lock (or if I tell it to lock), it fades to black, showing only the mouse cursor. However, when I move the mouse to bring up the password prompt, nothing happens, the screens remain completely blank. Furthermore, it would appear that the screen lock never activated in the first place, for two reasons: one, if I blindly enter my password and press enter, nothing happens; and two, if I press ctrl+alt+delete and then enter it logs me out (which shouldn't happen if the password prompt is there, right), losing any progress I have on any of the open programs (meaning, not a very friendly option for a programmer ;) ). So yeah, does anyone know why this is happening, and how to fix it? Thanks! Notes: I am using Ubuntu 11.10 64 bit. I am using gnome-classic, but the same problem occurs when I use unity. I do not have xscreensaver, nor do I have any screen savers running (except, I guess for the default blank one).

  Read the article

• conky stopped displaying after daul monitors setup -- works when I detect monitors

  - by synaptik

  I just recently installed Ubuntu 12.04 on a clean install. I previously was using 11.10. I am also using a new laptop with a Dell docking-station and two external monitors. When I try to use the .conkyrc file that I used previously, my conky display simply doesn't show up anywhere. However, after I went to System Settings Displays and made some slight change that caused the monitors to refresh, then conky appeared as it should. Here is my .conkyrc file: background yes use_xft yes xftfont DejaVu Sans Mono:size=8 xftalpha 0.8 out_to_console no update_interval 2.0 total_run_times 0 draw_shades no short_units yes # Create own window instead of using desktop (required in nautilus) own_window yes # If own_window is yes, you may use type normal, desktop or override own_window_type override # Use pseudo transparency with own_window? own_window_transparent yes double_buffer yes default_color f0e68c color1 white color2 AD0303 alignment bottom_left gap_x 2 gap_y 30 no_buffers yes use_spacer right pad_percents 3 xftfont Terminus:size=10 TEXT $stippled_hr cpu1: ${color1}${cpu cpu1}% ${color} cpu2: ${color1}${cpu cpu2}% ${color} load: ${color1}$loadavg ${color} hot proc: ${color1}${top cpu 1}% - ${top name 1}${color} $stippled_hr big proc: ${color1}${top_mem mem_res 1} - ${top_mem name 1}${color} memory: ${color1}$mem/$memmax $memperc%${color} $stippled_hr disk: ${color1}${fs_used /}/${fs_size /}${color} swap: ${color1}${swap}/${swapmax}${color} ${diskiograph_read 15,120 color1 0077ff 750} ${diskiograph_write 15,120 color1 0077ff 750} $stippled_hr download: ${color1}${downspeed wlan0} /s${color} ${downspeedgraph eth0 20,120 104E8B 0077ff} upload: ${color1}${upspeed wlan0} /s${color} ${upspeedgraph eth0 20,120 104E8B 0077ff} How can I fix it so that I don't have to tamper with the Displays settings in order for conky to show up?

  Read the article

• Issuse with multiple student result printing request

  - by dotman14

  I'm not really sure about how to ask this question but i'll try my best to make it clear enough. I have a Student Result Application where by students result are managed, over several academic sessions, all having two semesters each. During each semester students take different courses and have results based on the semester. The application is done now and i'm using a PDF Libaray to crop the final result page to hand over to the students each semester. If a student request a particular semester result it's a straight forward issue and there are no complications when it comes to printing out the result. My issue is this: in a case where a student requests to have a combination of semesters...say 3rd year rain semester , 4th year rain semester and 5th year hamattarn semester. Please how can i handle this issue? Does the user picks these options at the user interface level or there's a special way to handle issues like this? Also, if i'm to display these multiple student result how could this be be done, knowing fully well that i'll have to print the different result seperately. Hopefully i've being able to make my situation clear enough. Thanks for your time and patience. Expecting your comments and answers. Thanks.

  Read the article

• Using rel=canonical and noindex in a 1-n partners enviroment

  - by Telemako Mako

  We sell a whole site (domain, etc) to partners that create content that is shown together at the main site. What we want to achieve is that the main site copy is the original, but the one that is indexed is the partners copy. We want to do it this way so the search results point to the partner sites but never to the main site while the main site gets all the credit for the links. We are trying setting the main site article with a noindex, follow and a link to the partner article, and in the partner article we have a rel=canonical pointing to the main site article. Are we correct or the noindex at the main site will break the canonical reference?

  Read the article

• Country specific SEO

  - by John

  I have a wordpress site which is located at a .com address. The site is a simple 4 page personal site with my academic credentials, publications and a health blog that I started. I have done quite a bit of seo and I rank pretty high for the keywords i want on google.co.uk. However, I do not rank at all on google.com.mt which is the Malta specific search. I have therefore just bought the .com.mt domain and pointed the DNS nameservers to my current host provider and redirected it to the .com address. My goal is to make sure I don't screw up my google.co.uk search ranking, while starting to rank on google.com.mt I'm I doing the right thing or do you have any suggestions??

  Read the article

• How can I prevent an app from leaving full screen mode when I move the cursor to another display?

  - by dan

  When I have dual displays set up, or when I am using Synergy to use one keyboard and mouse across two computers/screens, I can't seem to retain F11 full screen mode for the top application when I mouse out of that screen. This applies to both the application and also to any Flash video that may be playing in full screen mode. Is there any way to retain full screen mode and mouse out of the display?

  Read the article

• Big project layout : adding new feature on multiple sub-projects

  - by Shiplu

  I want to know how to manage a big project with many components with version control management system. In my current project there are 4 major parts. Web Server Admin console Platform. The web and server part uses 2 libraries that I wrote. In total there are 5 git repositories and 1 mercurial repository. The project build script is in Platform repository. It automates the whole building process. The problem is when I add a new feature that affects multiple components I have to create branch for each of the affected repo. Implement the feature. Merge it back. My gut feeling is "something is wrong". So should I create a single repo and put all the components there? I think branching will be easier in that case. Or I just do what I am doing right now. In that case how do I solve this problem of creating branch on each repository?

  Read the article

• Dual Monitor (Monitor and TV)

  - by umpirsky

  I connected TV to my computer, and trying to set dual display. Whatever resolution I choose for my second display (TV) I get message like this: The selected configuration for displays could not be applied required virtual size does not fit available size: requested=(2704, 1050), minimum=(320, 200), maximum=(1680, 1680) How can I fix this? Also, while I was experimenting system went to deadlock, I restarted and after boot monitor just turns off once system is up. I boot in recovery mode and after several retries fixed it somehow, I don't know how, probably by changing display config from display manager. now I found xorg.conf.new file in my home dir: Section "ServerLayout" Identifier "X.org Configured" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" Screen 2 "Screen2" RightOf "Screen1" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "extmod" Load "dbe" Load "glx" Load "dri" Load "dri2" Load "record" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "Monitor0" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor1" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Monitor Vendor" ModelName "Monitor Model" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:2:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:2:0:0" EndSection Section "Screen" Identifier "Screen0" Device "Card0" Monitor "Monitor0" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Card1" Monitor "Monitor1" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Card2" Monitor "Monitor2" SubSection "Display" Viewport 0 0 Depth 1 EndSubSection SubSection "Display" Viewport 0 0 Depth 4 EndSubSection SubSection "Display" Viewport 0 0 Depth 8 EndSubSection SubSection "Display" Viewport 0 0 Depth 15 EndSubSection SubSection "Display" Viewport 0 0 Depth 16 EndSubSection SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Can I delete it? Second display (TV) only works when I check Mirror displays option.

  Read the article

• C# Role Provider for multiple applications

  - by Juventus18

  I'm making a custom RoleProvider that I would like to use across multiple applications in the same application pool. For the administration of roles (create new role, add users to role, etc..) I would like to create a master application that I could login to and set the roles for each additional application. So for example, I might have AppA and AppB in my organization, and I need to make an application called AppRoleManager that can set roles for AppA and AppB. I am having troubles implementing my custom RoleProvider because it uses an initialize method that gets the application name from the config file, but I need the application name to be a variable (i.e. "AppA" or "AppB") and passed as a parameter. I thought about just implementing the required methods, and then also having additional methods that pass application name as a parameter, but that seems clunky. i.e. public override CreateRole(string roleName) { //uses the ApplicationName property of this, which is set in web.config //creates role in db } public CreateRole(string ApplicationName, string roleName) { //creates role in db with specified params. } Also, I would prefer if people were prevented from calling CreateRole(string roleName) because the current instance of the class might have a different applicationName value than intended (what should i do here? throw NotImplementedException?). I tried just writing the class without inheriting RoleProvider. But it is required by the framework. Any general ideas on how to structure this project? I was thinking make a wrapper class that uses the role provider, and explicitly sets the application name before (and after) and calls to the provider something like this: static class RoleProviderWrapper { public static CreateRole(string pApplicationName, string pRoleName) { Roles.Provider.ApplicationName = pApplicationName; Roles.Provider.CreateRole(pRoleName); Roles.Provider.ApplicationName = "Generic"; } } is this my best-bet?

  Read the article

• Ubutu 14.04 triple screen, third screen black and X cursor

  - by Horse

  I am having some issues getting my third screen working properly. I had triple screens working fine on 12.04, using 2 nvidia cards. Did a fresh install of 14.04 and having no end of problems getting it working. It either will just be disabled, or the screen is black with the cursor as an X. I can only enable it from the nvidia server settings tool. The Ubuntu native display settings won't even show the 3rd screen. I tried copying the xorg.conf from my old install, which upon restarting X worked fine on the login screen, but then it just sat there after I logged in and didn’t do anything (mouse was still working). I am using gnome-session-fallback instead of unity if that makes any difference. Still having these issues if I try unity though. How do I get my 3rd screen working and displaying a desktop? Here is my current xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 331.20 (buildd@roseapple) Mon Feb 3 15:07:22 UTC 2014 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: unknown, VertRefresh source: unknown Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 0.0 - 0.0 VertRefresh 0.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Screen" # Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0" # Removed Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0" # Removed Option "SLI" "Off" # Removed Option "BaseMosaic" "off" # Removed Option "metamodes" "GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-2: nvidia-auto-select +0+0, GPU-109d4eb8-b40b-87d7-3fd6-95830d1d5215.DVI-I-3: nvidia-auto-select +1280+0, GPU-82e96214-175e-5e6a-218c-5bdbc948daf2.DVI-I-1: nvidia-auto-select +3200+0" # Removed Option "SLI" "off" # Removed Option "BaseMosaic" "on" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "nvidiaXineramaInfoOrder" "DFP-0" Option "metamodes" "DVI-I-2: nvidia-auto-select +0+0, DVI-I-3: nvidia-auto-select +1280+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" # Removed Option "metamodes" "nvidia-auto-select +0+0" # Removed Option "metamodes" "DVI-I-3: nvidia-auto-select +0+0" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" Option "SLI" "Off" Option "MultiGPU" "Off" Option "BaseMosaic" "off" SubSection "Display" Depth 24 EndSubSection EndSection Here is my old 'working in 12.04' xorg.conf # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 310.19 ([email protected]) Thu Nov 8 02:08:55 PST 2012 Section "ServerLayout" # Removed Option "Xinerama" "0" Identifier "Layout0" Screen 0 "Screen0" 0 0 Screen 1 "Screen1" RightOf "Screen2" Screen 2 "Screen2" RightOf "Screen0" InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "1" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" # HorizSync source: unknown, VertRefresh source: unknown Identifier "Monitor1" VendorName "Unknown" ModelName "DELL 1907FP" HorizSync 30.0 - 81.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Monitor" Identifier "Monitor2" VendorName "Unknown" ModelName "Apple Cinema HD" HorizSync 74.0 - 74.6 VertRefresh 59.9 - 60.0 EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" Screen 0 EndSection Section "Device" Identifier "Device1" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GT 520" BusID "PCI:3:0:0" EndSection Section "Device" Identifier "Device2" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "GeForce GTX 580" BusID "PCI:1:0:0" Screen 1 EndSection Section "Screen" # Removed Option "metamodes" "DFP-0: nvidia-auto-select +0+0, DFP-2: nvidia-auto-select +1280+0" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-0: nvidia-auto-select +0+0; DFP-0: nvidia-auto-select +0+0; DFP-0: 1280x1024_75 +0+0; DFP-0: 1152x864 +0+0; DFP-0: 1024x768 +0+0; DFP-0: 1024x768_60 +0+0; DFP-0: 800x600 +0+0; DFP-0: 800x600_60 +0+0; DFP-0: 640x480 +0+0; DFP-0: 640x480_60 +0+0; DFP-0: nvidia-auto-select +0+0 {viewportout=1280x720+0+152}" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" Monitor "Monitor1" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" Monitor "Monitor2" DefaultDepth 24 Option "Stereo" "0" Option "metamodes" "DFP-2: nvidia-auto-select +0+0" SubSection "Display" Depth 24 EndSubSection EndSection Section "Extensions" Option "Composite" "Disable" EndSection

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >