Search Results

Search found 22277 results on 892 pages for 'multiple addresses'.

Page 45/892 | < Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >

• menubar visible pipelight on secondray screen

  - by Adrien

  First of all, here is my setup : Ubuntu 13.04 on a laptop, main display is the laptop screen, secondary display is my tv Chrome Pipelight (microsoft silverlight running through wine) a silverlight application in the secondary display(netflix) The problem is that, when i put netflix in fullscreen mode, the menubar remains visible on top of the secondary screen. Apparently the aplication that has focus is Microsoft Silverlight. What can I do to solve this?

  Read the article

• 12.04, nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Nvidia dual monitor configuration gets lost every time I reboot

  - by sunwukung

  I've recently updated (well, borked then completely reinstalled) to 12.04. I'm running a dual monitor setup, with a Dell U2410 / Dell 2007WFP combination on an HP Elite Book 8560W. The graphics card is an NVIDIA GF108 [Quadro 1000M]. My problem is as follows. I can get the dual monitor setup working fine, but every time I reboot, my machine appears to lose the settings (specifically, the U2410 is disabled, the mouse pointer is locked in the launcher). I have to restate the settings after every launch. I've tried running nvidia-settings as sudo, I've save the changes to my xorg.conf file (see below) but nothing seems to be sticking. Has anyone had similair issues, or know of a fix? Conf file follows: # nvidia-settings: X configuration file generated by nvidia-settings # nvidia-settings: version 295.33 (buildd@allspice) Fri Mar 30 15:25:24 UTC 2012 Section "ServerLayout" Identifier "Layout0" Screen 0 "Screen0" 0 0 InputDevice "Keyboard0" "CoreKeyboard" InputDevice "Mouse0" "CorePointer" Option "Xinerama" "0" EndSection Section "Files" EndSection Section "InputDevice" # generated from default Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/psaux" Option "Emulate3Buttons" "no" Option "ZAxisMapping" "4 5" EndSection Section "InputDevice" # generated from default Identifier "Keyboard0" Driver "kbd" EndSection Section "Monitor" # HorizSync source: edid, VertRefresh source: edid Identifier "Monitor0" VendorName "Unknown" ModelName "DELL 2007WFP" HorizSync 30.0 - 83.0 VertRefresh 56.0 - 76.0 Option "DPMS" EndSection Section "Device" Identifier "Device0" Driver "nvidia" VendorName "NVIDIA Corporation" BoardName "Quadro 1000M" EndSection Section "Screen" Identifier "Screen0" Device "Device0" Monitor "Monitor0" DefaultDepth 24 Option "TwinView" "1" Option "TwinViewXineramaInfoOrder" "DFP-1" Option "metamodes" "CRT: 1680x1050 +1920+0, DFP-1: 1920x1200 +0+0; CRT: nvidia-auto-select +0+0, DFP-1: NULL" SubSection "Display" Depth 24 EndSubSection EndSection The error message I'm getting is this: none of the selected modes were compatible with the possible modes: Trying modes for CRTC 642: CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 0) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1) CRTC 642: trying mode 3600x1080@50hz with output at 1280 x 1024@0Hz (pass 1)

  Read the article

• Misaligned Display on Resume

  - by Shaun Killingbeck

  I have an odd issue with my laptop display when resuming from suspend. When I have an additional monitor connected there is no issue. However without an additional monitor connected, after resuming only the left 10% of the laptop screen (just enough to show the Unity Launcher and a bit more) is visibly working, although strangely in a screenshot this same 10% is shown on the right hand side of the screenshot: I ran xrandr --verbose before and after resume, and the only difference (using diff) was: 2c2 < LVDS connected 1366x768+0+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm --- > LVDS connected 1366x768+1280+0 (0x98) normal (normal left inverted right x axis y axis) 344mm x 194mm This seems to suggest the screen position has been shifted by 1280 horizontally, the width of the second monitor I use. Indeed, running the command xrandr --output LVDS --pos 0x0 does bring the screen back to normal. However, I don't want to have to run this command every time, I'd prefer to cure the source of the problem than just correct the symptoms. Any ideas on how to get Ubuntu to keep the display configuration settings from before suspend when it resumes? or why it changes at all? Heres some technical details that might be pertinent: HP Pavilion DV6 Laptop Ubuntu 13.04 AMD Radeon HD 6400M Series AMD Radeon HD 6520G Using proprietary flgrx-updates driver and amdcccle (Catalyst Control Center) (Unfortunately the open source driver causes my laptop to run even hotter than it already does, otherwise I'd use that) The contents of Xorg.conf: Section "ServerLayout" Identifier "amdcccle Layout" Screen 0 "amdcccle-Screen[0]-0" 0 0 EndSection Section "Module" Load "glx" EndSection Section "Monitor" Identifier "0-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1280x768" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-LVDS" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "1280 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1366x768" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" Option "PreferredMode" "1280x1024" EndSection Section "Device" Identifier "amdcccle-Device[0]-0" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:0:1:0" EndSection Section "Device" Identifier "amdcccle-Device[0]-1" Driver "fglrx" Option "Monitor-LVDS" "1-LVDS" BusID "PCI:0:1:0" Screen 1 EndSection Section "Screen" Identifier "Default Screen" DefaultDepth 24 EndSection Section "Screen" Identifier "amdcccle-Screen[0]-0" Device "amdcccle-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 2646 2646 Depth 24 EndSubSection EndSection Section "Screen" Identifier "amdcccle-Screen[0]-1" Device "amdcccle-Device[0]-1" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• How can I get nvidia-settings to work?

  - by Palace Chan

  I have an ASUS N56VM-TB71 with a GeForce 630M graphics card. I have ubuntu 12.04 and when I vga plugged in a dell monitor, i am able to use it. When I then use my laptops hdmi port to plug in my second monitor, nothing happens, so I went to nvidia-settings and I got the error: You do not appear to be using the NVIDIA X Driver, please run nvidia-xconfig as root and restart the X server. I ran this command and rebooted but I still cannot access nvidia-settings and I keep getting that error even though my /etc/X11/xconf.org is the one that got generated by running that command! What can I do to get around that and use my second monitor as well?

  Read the article

• Many small scripts, one repository or multiple?

  - by The Jug

  A co-worker and myself have run into an issue that we have multiple opinions on. Currently we have a git repository that we are keeping all of our cronjobs in. There are about 20 crons and they are not really related except for the fact that they are all small python scripts and essential for some activity. We are using a fabric.py file to deploy and a requirements.txt file to manage requirements for all of the scripts. Our issue is basically, do we keep all of these scripts in one git repository or should we be separating them out into their own repositories? By keeping them in one repository it is easier to deploy them onto one server. We can use just one cron file for all the scripts. However this feels wrong, as the 20 cronjobs are not logically related. Additionally, when using one requirements.txt file for all the scripts, it's hard to figure out what the dependencies are for a particular script and they all have to use the same versions of packages. We could separate all of the scripts out into their own repositories but this creates 20 different repositories that need to be remembered and dealt with. Most of these scripts are not very large and that solution seems to be overkill. A related question is, do we use one big crontab file for all cronjobs, or a separate file for each? If each has their own, how does one crontab's installation avoid overwriting the other 19? This also seems like a pain as there would then by 20 different cron files to keep track of. In short, our main question and issue is do we keep them all closely bundled as one repository or do we separate them out into their own repository with their own requirements.txt and fabfile.py? We feel like we're also probably looking over some really simple solution. Is there an easier way to deal with this issue?

  Read the article

• nvidia-settings makes one of my dual monitors grey and useless, disables network

  - by Kerrick

  I'm running Ubuntu 12.04 64-bit, Precise Pangolin, with a PNY GTS 250 1GB video card and a monitor plugged into each of the DVI ports. I'm using the proprietary drivers (post-release updates). If I set anything to do with Separate X Screens up in nvidia-settings (and write it to xorg.conf and reboot), my second monitor has a grey background, no menu bar, no ability to have a window on it, the second monitor doesn't get picked up in a screneshot, and if I move my mouse cursor to it it's an ugly black X. Plus, my network is unable to connect to anything. If I subsequently delete /etc/X11/xorg.conf and reboot, everything goes back to working, albeit with a single monitor activated. If I set anything to do with TwinView up in nvidia-settings, my second monitor starts working, but it isn't seen as a second monitor by Ubuntu, so I can't apply color calibration to it separately. Plus, my mouse gets "caught" between the monitors every time I try to move my cursor between the two. What gives? If it helps, this is the xorg.conf that nvidia-settings generates for Separate X Screens.

  Read the article

• Why are bugs responsible for big deficiencies in functionality given such low priority?

  - by keepitsimpleengineer

  Well, first of all, change is inevitable and mostly good. Furthermore attempts at simplifying the User Interface such as Gnome 3, Unity to make Linux more inclusive hold much promise, even though they adversely affect my style of working. Additionally, though now retired, I have worked with computers for 47 years, and though I do nothing serious for others now, I still do heavy duty things. 10.04 LTS is my big workstation, and I had three 10.10 systems for Mythtv, and one of which is further adapted for video & related. The Mythtv were 10.10 because of a dormant bug regarding installing to 10.04. My work habits consistently use dual monitors and compiz cube and 3D windows with the computing horsepower to support them. The dual monitors with separate X screens has been not been functional since 11.04, and cube/3D windows not functional in Unity, and with diminished functionality Gnome. There is a bug filed (after upgrade to 12.04 amd64 Gnome Classic not properly draw second screen) I have mitigated the situation some by switching to Xubuntu and eschewing Unity. The question that comes to mind is why this bug is not given more attention in that it nearly cuts functionality in half for more competent workstations. Sample workspace... Please know that I appreciate all the hard work, dedication require to pull off something as big as Ubuntu et al.

  Read the article

• Ubuntu 12.4 cursor changes

  - by mantic0

  I have a weird problem with my Ubuntu 12.4 dual screen setup (Toshiba laptop + one monitor). After a while the cursor on one screen completely changes its shape (not every time). I don't really know how to describe it because it's always something else. Sometimes I get four or five vertical lines instead of a cursor, sometimes I can only see part of the cursor, etc, sometimes weird shade appears. This only happens on one screen simultaneously. If I go to the other screen, the cursor appears to be fine but when I change screens, the cursor changes. I tried to do a screenshot but when I do, the cursor looks just fine. I'm using Unity and Gnome 3 but the problem is on both desktop environments. Nothing is wrong with my screen though because I'm also using Windows and I don't have any problems there.

  Read the article

• wine 1.4 regedit makes screen flicker on 12.04 with dual monitor setup

  - by s1lv3r

  I have a dualmonitor setup running dual 23" on 1920x1080 which has the following problem: When running any wine application (for example "wine regedit" from console) the screen flickers and the windows have artifacts like this: Also sometimes taking a screenshot using the print key will make compiz crash (starter and all window bars/menus are gone) when an wine application is started. I don't have the same problems on my notebook which has the same setup. Only difference is the notebook has ATI Graphics and this PC has nvidia. This is the output of lshw -c video: *-display Beschreibung: VGA compatible controller Produkt: G72 [GeForce 7300 LE] Hersteller: NVIDIA Corporation Physische ID: 0 Bus-Informationen: pci@0000:07:00.0 Version: a1 Breite: 64 bits Takt: 33MHz Fähigkeiten: pm msi pciexpress vga_controller bus_master cap_list rom Konfiguration: driver=nvidia latency=0 Ressourcen: irq:16 memory:fa000000-faffffff memory:d0000000-dfffffff memory:fb000000-fbffffff memory:fce00000-fce1ffff I also noticed that running xrandr from console makes the screen flicker for some seconds on this PC, which also doesn't happen on my notebook. Removing one screen from the setup will stop the flickering and the artifacts inside the wine applications from appearing. Does anybody have an advice what I could try to change to make this work?

  Read the article

• Wordpress Multisite and Google Analytics in subfolders with mapped domains

  - by David

  I have a wordpress multisite with sub folders. The site's subfolders are mapped to domains, which are set to primary. I'm using the 'Google Analytics Multisite Async' code to track things. From what I can see it's tracking the sites fine (getting page hits for each site in google analytics) baring the original site in the Multisite which in content overview lists domains then the amount of traffic it's getting along with the orginal domains traffic. I don't want to track any other traffic for my orginal site than what goes to that. i.e. I don't want it tracking my other sites in multi-site. e.g. domain1.com is my orginal and I have lots of other sites in the multisite lets say domain2.com, domain3.com. In content overview in Analytics it's listing say domain2.com as content. Can I tell it to filter these out some how either in Analytics or within WordPress? Hopefully explained that clearly!

  Read the article

• Is this a dual monitor reset bug?

  - by Tentresh

  My two displays are: Intel GMA x4500 Laptop (1280x800 native resolution of the built-in display) External display (1920x1080) A few minutes after I login to my dual monitor setup, it gets reset to mirror screens. If I restore the settings via the displays application, everything is fine. On each reset, the following messages are written into /var/log/Xorg.0.log: [ 60.852] (II) PM Event received: Capability Changed [ 60.852] I830PMEvent: Capability change [ 132.920] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 132.920] (II) intel(0): Printing DDC gathered Modelines: [ 132.920] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 134.228] (II) intel(0): Allocated new frame buffer 1280x800 stride 5120, tiled Whereas right on startup or manual resolution reset, /var/log/Xorg.0.log reports the expected frame buffer allocation: [ 1562.382] (II) intel(0): EDID vendor "SEC", prod id 12869 [ 1562.382] (II) intel(0): Printing DDC gathered Modelines: [ 1562.382] (II) intel(0): Modeline "1280x800"x0.0 68.94 1280 1296 1344 1408 800 801 804 816 -hsync -vsync (49.0 kHz) [ 1576.740] (II) intel(0): Allocated new frame buffer 3200x1080 stride 12800, tiled Is Ubuntu 12.04 not compatible with my video card? Can this be solved within Ubuntu? I like its interface, but manually fiddling with resolution on every login is not bearable.

  Read the article

• How do I get the same dual-screen experience on my install as I had on the 12.04 Live CD?

  - by Alexander G

  I downloaded, burned to disc, and booted Ubuntu 12.04 Precise (I defected to Arch for a year when I got fed up of Natty). I was pleasantly surprised by both of my monitors working perfectly on there (needed to rearrange as my secondary monitor is to the left, however). So I installed. There's no recognition of the second monitor now, and it doesn't appear in the settings. I've also enabled the Nvidia driver. What do I do?

  Read the article

• Change order of monitors without changing fullscreen"size"

  - by user171489

  I have a dual monitor setup. My primary monitor is a 22" with a max resolution of 1680x1050 and my secondary is a 19" with a max resolution of 1280x1024. The secondary is standing on the left side of the primary one. My problem now is, that, if I change the order of the monitors in my nvidia x-server settings, so that my secondary is the first one (or the one on the left), the fullscreen mode in flash in scaled up to my secondary monitor, even if it´s displayed on my primary one. Meaning that i get a 1280x1024 "fullscreen" window on my bigger primary monitor. When I configure my x-server settings so the secondary monitor is the one on the right, I don´t have this problem. The only thing then is, that I have to scroll out on the right to get to my monitor on the right. I can´t move my secondary monitor on the right side of my primary due to lack of space and my belief that there must be a software solution. ;) Thanks in advance.

  Read the article

• Why Is Another Domain Resolving To My IP Address?

  - by Andrew

  I'm not really sure if this is something that I should worry about... I'm currently renting a dedicated server which is hosting a website I've created. The domain of the website was registered with GoDaddy. After submitting a sitemap to Google several months ago, I've noticed that another domain name is resolving to my IP address. This means that every page on my website is actually accessible from another domain. As far as I can tell, the other domain name is meaningless to me, so I'm not sure if this is something I should worry about or not. Is this a residual DNS record from another site that is probably no longer in use? Is it important from the standpoint of either security or SEO? My website is a .com which will later serve e-commerce purposes. The other domain has a top-level domain of st. It's the first one of those that I've encountered. Many thanks in advance!

  Read the article

• Setting up dual monitors, Xorg.conf issues

  - by JTS

  I just got a new computer (W520, Graphics card nVidia GF106 [Quadro 2000]) and installed ubuntu on it using wubi. I have everything working, so I wanted to set it up to be able to use two monitors with an extended screen. I figured I had to edit Xorg.conf, but the file didnt exist. So I tried to create it by booting in recovery mode, and executing Xorg -configure but I am getting these errors: (EE) Failed to load module "vmwgfx" (module does not exist, 0) (EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx (++) Using config file: "/root/xorg.conf.new" (==) Using system config directory "/usr/share/X11/xorg.conf.d" (EE) [drm] No DRICreatedPCIBusID symbol Number of created screens does not match number of detected devices. Configuration failed. ddxSigGiveUp: Closing log Any idea how I can get Xorg -configure to work, so that I can have an xorg.conf file that I can edit to enable twinview? EDIT: Another way I could ask the same question to solve this problem is, why can't I boot with an xorg.conf file generated by nvidia-xconfig? Is there something in the generated xorg.conf file that might need editing?

  Read the article

• Need help with xorg.conf for dual Radeon HD6450 video cards with 4 monitors

  - by Eriks Goodwin-Pfister

  I am running 64-bit Ubuntu 13.10 with Unity and have dual (2) Radeon HD6450 video cards and 4 Hanns-G HL273 monitors. Each Radeon card is driving one monitor via DVI and the other via VGA. I am running the proprietary video drivers from AMD's web site: "amd-catalyst-13.11-beta V9.4-linux-x86.x86_64.run" I tried to use "amd-catalyst-13.12-linux-x86.x86_64.run" but could not get that newer version to install. What I need help with is how to "correct" my xorg.conf file and any other needed instructions to get all four of my monitors to work as a continuous desktop that allows me to drag things from one monitor to the next, etc. When I tried to use the default open source drivers that came in Ubuntu 13.10, only three of the monitors would work. Now that I am running the proprietary ones, all four monitors come on and I can move my mouse from one end to the other--but only the right-most monitor displays my desktop and allows me to "do anything". Any time I move my mouse to any of the other three monitors (which display all-white), it turns into an "X" and does not do anything else but move. Enabling xinerama makes all four displays go all-black after login. I do have amdcccle installed, but it does not seem to have the ability to handle my particular configuration. My Current xorg.conf: Section "ServerLayout" Identifier "Basic Layout" Screen 0 "Screen1" 5760 0 Screen 1 "Screen0" 0 0 Screen 2 "Screen2" 3840 0 Screen 3 "Screen3" 1920 0 EndSection Section "Module" EndSection Section "Monitor" Identifier "0-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-DFP2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "1-CRT1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" Identifier "Device0" Driver "fglrx" Option "Monitor-CRT1" "1-CRT1" BusID "PCI:1:0:0" EndSection Section "Device" Identifier "Device1" Driver "fglrx" Option "Monitor-DFP2" "0-DFP2" BusID "PCI:4:0:0" EndSection Section "Device" Identifier "Device2" Driver "fglrx" Option "Monitor-DFP2" "1-DFP2" BusID "PCI:1:0:0" Screen 1 EndSection Section "Device" Identifier "Device3" Driver "fglrx" Option "Monitor-CRT1" "0-CRT1" BusID "PCI:4:0:0" Screen 1 EndSection Section "Screen" Identifier "Screen0" Device "Device0" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen1" Device "Device1" DefaultDepth 24 SubSection "Display" Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen2" Device "Device2" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection Section "Screen" Identifier "Screen3" Device "Device3" DefaultDepth 24 SubSection "Display" Viewport 0 0 Depth 24 EndSubSection EndSection

  Read the article

• How to make Ubuntu recognize an unknown external display (so I can adjust its resolution)?

  - by WagnerAA

  I have a Dell laptop with an external monitor attached (a Samsumg SyncMaster 931c). My laptop display was recognized, and I can adjust its optimum resolution. My external display is still unknown, thus I'm stuck at a lower resolution (1024x768): I tried the "Detect Displays" button, but it didn't work, nothing happens. I recently upgraded from Ubuntu 12.04 to 12.10. Things were working before. I don't know if I can actually change this configuration, or if this is a bug. I searched for an answer here and also in Launchpad's website, but found none. I even tried to install Nvidia drivers, and just messed things up. It seems I wasn't even using nvidia before, as I guessed by looking at my additional drivers configuration: My laptop has an Intel chipset, I guess: $ dpkg --get-selections | grep -i -e nvidia -e intel intel-gpu-tools install libdrm-intel1:amd64 install libdrm-intel1:i386 install nvidia-common install xserver-xorg-video-intel install I don't have an xorg.conf file (I think this is nvidia related, am I right?): $ cat /etc/X11/xorg.conf cat: /etc/X11/xorg.conf: No such file or directory $ ls -l /etc/X11/ total 76 drwxr-xr-x 2 root root 4096 Out 19 23:41 app-defaults drwxr-xr-x 2 root root 4096 Abr 25 2012 cursors -rw-r--r-- 1 root root 18 Abr 25 2012 default-display-manager drwxr-xr-x 4 root root 4096 Abr 25 2012 fonts -rw-r--r-- 1 root root 17394 Dez 3 2009 rgb.txt lrwxrwxrwx 1 root root 13 Mai 1 03:33 X -> /usr/bin/Xorg drwxr-xr-x 3 root root 4096 Out 19 23:41 xinit drwxr-xr-x 2 root root 4096 Jan 23 2012 xkb -rw-r--r-- 1 root root 0 Out 24 08:55 xorg.conf.nvidia-xconfig-original -rwxr-xr-x 1 root root 709 Abr 1 2010 Xreset drwxr-xr-x 2 root root 4096 Out 19 10:08 Xreset.d drwxr-xr-x 2 root root 4096 Out 19 10:08 Xresources -rwxr-xr-x 1 root root 3730 Jan 20 2012 Xsession drwxr-xr-x 2 root root 4096 Out 20 00:11 Xsession.d -rw-r--r-- 1 root root 265 Jul 1 2008 Xsession.options -rw-r--r-- 1 root root 13 Ago 15 06:43 XvMCConfig -rw-r--r-- 1 root root 601 Abr 25 2012 Xwrapper.config Here is some information I gathered by looking at other related posts: $ sudo lshw -C display; lsb_release -a; uname -a *-display:0 description: VGA compatible controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2 bus info: pci@0000:00:02.0 version: 07 width: 64 bits clock: 33MHz capabilities: msi pm vga_controller bus_master cap_list rom configuration: driver=i915 latency=0 resources: irq:48 memory:f6800000-f6bfffff memory:d0000000-dfffffff ioport:1800(size=8) *-display:1 UNCLAIMED description: Display controller product: Mobile 4 Series Chipset Integrated Graphics Controller vendor: Intel Corporation physical id: 2.1 bus info: pci@0000:00:02.1 version: 07 width: 64 bits clock: 33MHz capabilities: pm bus_master cap_list configuration: latency=0 resources: memory:f6100000-f61fffff LSB Version: core-2.0-amd64:core-2.0-noarch:core-3.0-amd64:core-3.0-noarch:core-3.1-amd64:core-3.1-noarch:core-3.2-amd64:core-3.2-noarch:core-4.0-amd64:core-4.0-noarch:cxx-3.0-amd64:cxx-3.0-noarch:cxx-3.1-amd64:cxx-3.1-noarch:cxx-3.2-amd64:cxx-3.2-noarch:cxx-4.0-amd64:cxx-4.0-noarch:desktop-3.1-amd64:desktop-3.1-noarch:desktop-3.2-amd64:desktop-3.2-noarch:desktop-4.0-amd64:desktop-4.0-noarch:graphics-2.0-amd64:graphics-2.0-noarch:graphics-3.0-amd64:graphics-3.0-noarch:graphics-3.1-amd64:graphics-3.1-noarch:graphics-3.2-amd64:graphics-3.2-noarch:graphics-4.0-amd64:graphics-4.0-noarch:printing-3.2-amd64:printing-3.2-noarch:printing-4.0-amd64:printing-4.0-noarch:qt4-3.1-amd64:qt4-3.1-noarch Distributor ID: Ubuntu Description: Ubuntu 12.10 Release: 12.10 Codename: quantal Linux Batcave 3.5.0-17-generic #28-Ubuntu SMP Tue Oct 9 19:31:23 UTC 2012 x86_64 x86_64 x86_64 GNU/Linux $ xrandr -q Screen 0: minimum 320 x 200, current 2304 x 800, maximum 32767 x 32767 LVDS1 connected 1280x800+0+0 (normal left inverted right x axis y axis) 286mm x 1790mm 1280x800 59.9*+ 1024x768 60.0 800x600 60.3 56.2 640x480 59.9 VGA1 connected 1024x768+1280+32 (normal left inverted right x axis y axis) 0mm x 0mm 1024x768 60.0* 800x600 60.3 56.2 848x480 60.0 640x480 59.9 DP1 disconnected (normal left inverted right x axis y axis) If there's anything else I can do, any other information I can post here, to help me configure this external display, please let me know. If this is actually a bug, I apologize (I know bugs are not allowed here), but I really wasn't sure. And I will promptly file a bug report in Launchpad if that's the case. Thanks a lot in advance. ;)

  Read the article

• Unity displays a black screen when connecting an external monitor

  - by Bragboy

  I upgraded my ubuntu from 10.10 to 11.04 and since that day I have been facing issues with Dual Monitor in Ubuntu. When I connect my second monitor during boot time, everything works fine. But when I use my laptop and try to connect a monitor when I am running Ubuntu, I face a weird black screen issue. To see what I mean, following is a screenshot of the same. Here are the problems that happen Desktop background goes away As you can see on the left hand side of the desktop, the right and top portions are black The usual buttons - power button, mail, volumne etc., on the top panel do not work as expected Plus it suddenly crashses at times. And a lot of n other issues associated with this. Is there any patch/release that has happened for these bugs or should I report it anywhere? Help needed.

  Read the article

• Force full-screen game to one monitor?

  - by Joachim Pileborg

  I have two monitors, one 1920x1200 and the other 1920x1080, and in 10.10 they were "separate". As in when I opened the display preferences they were shown as separate screens. Since installing (from scratch) 11.04 I instead have one giant 3840x1200 screen spread over the two monitors. Not a problem per se, except when I want to play full-screen games! When playing games I want them to be on the primary (1920x1200) monitor, but since the game only detects one screen I cant do that, even if I lower the resolution in-game. I have a nVidia GTS 250 card, using nvidia-current driver (version 270.41.06), even though "Additional Drivers" reports the driver is "activated but not currently in use". Is there a way to force the game to use only one of the monitors? Or make the game detect both monitors?

  Read the article

• Default program startup display

  - by Tony Martin

  I have a dual display setup and would like to be able to set which display a piece of software starts on. Most software seems to return to the last display but Stellarium always starts in the primary display. Does Linux have a way of forcing the startup display or is it something the individual program has to manage? Thanks. EDIT And with no changes on my part Stellarium is behaving nicely and remembering which screen it was on. Still nice to know if there is a way of forcing this.

  Read the article

• Building a six-screen setup. What video cards options are there?

  - by Stephan

  I'm building myself a nice setup with a massive amount of screen real estate. Since I had/have problems with video drivers in the past. I'm asking for advise here first. I want to connect at least six screens. What are the best options? What are the pitfalls? I preferably would not like to use closed binary blob drivers. usecase scenario: I'm writing a piece of software that has to interact with other systems. I would like to be able to see all of those systems, my code, lots of log files and documentation without the need to swap windows/screens. To just better see what im doing.

  Read the article

• Dual monitors, screen resolution, xorg.conf.d

  - by Flase

  I do a lot of RTFM but this one has got me stuck. I have Ubuntu Studio 12.04 Precise Pangolin with XFCE as its default desktop. My old HIS ATI Radeon 9250 graphics card was adding red crud across the screen with the generic driver, but downloading the proprietary "fglrx" driver makes it work cleanly. The trouble is the Catalyst control centre refuses to recognise my old card so I must do some manual configuring to make sure both the DVI and VGA monitors are capable of the correct screen resolution (both 1280x1024) and a dual display. It used to be easier to just edit the existing xorg.conf file and add another resolution and so forth, but now there are automatic xorg.conf.d directories (more than one) with scant documentation. Creating a generic xorg.conf with a terminal command creates every setting imaginable. What I want to do is create the simplest conf file which just tells the system the following: My VGA monitor can do 1280x1024 60Hz The two monitors together may be 2560x1024 width The VGA monitor on the right I might need to specify Xinerama if it's needed Thank you. I don't think I need to bore you with log files, but please ask for further info. Mike

  Read the article

• Why are notifications appearing in the invisible black zone above my monitor ?

  - by Capt.Nemo

  I've got two monitors, with the right side one being slightly lower in the display settings. However any notifications I receive from notify-osd (including pidgin, notify-send etc) are sent to the top-most part of the right monitor screen, which results it in being invisible. And here's a pic of my monitor preferences : I'd earlier used the Wallpaper plugin in compiz to stitch my desktops, and then uninstalled compiz-extras. I'm using Ubuntu 11.04 in classic mode.

  Read the article

• Second display is rotated

  - by pram

  I've just updated to Ubuntu 12.10 last night. When I was at the office, I connected my laptop with a projector. Although it can detect the projector, it incorrectly set the projector portrait. Also, if I click the Rotation dropdown, it has no Normal option. It only offered Anticlockwise and Clockwise options. Ofcourse the projector would display my desktop 90 degrees clockwise/anticlockwise. I've just test my laptop again with an LCD monitor, and it happened again. Below is my screenshot for display settings. My display adapter is Intel GMA 950. How to fix this problem?

  Read the article

< Previous Page | 41 42 43 44 45 46 47 48 49 50 51 52  | Next Page >