Search Results

Search found 19308 results on 773 pages for 'network efficiency'.

Page 42/773 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

  • Warning message during boot after installation of kernel 3.3: Kernel needs AppArmor 2.4 compatibility patch

    - by Matus Frisik
    I have Ubuntu Server 11.10 and after installation of kernel 3.3 (I just followed instructions from site www.upbuntu.com - How To Install Linux 3.3 Kernel In Ubuntu 11.10/12.04) It shows me following message during boot: fsck from util-linux 2.19.1 fsck from util-linux 2.19.1 /dev/sda5: clean, 204099/1152816 files, 988854/4608639 blocks /dev/sda6: clean, 2345/1281120 files, 142711/5120710 blocks modem-manager[830]: ModemManager (version 0.5) starting... * Starting mDNS/DNS-SD daemon [154G[ OK ] * Starting CUPS printing spooler/server [154G[ OK ] * Starting Mount network filesystems [154G[ OK ] * Stopping Mount network filesystems [154G[ OK ] * Starting System V initialisation compatibility [154G[ OK ] * Stopping Failsafe Boot Delay [154G[ OK ] Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/bin.ping (/etc/apparmor.d/bin.ping line 28): profile /bin/ping network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/lightdm-guest-session (/etc/apparmor.d/lightdm-guest-session line 71): profile /usr/lib/lightdm/lightdm-guest-session-wrapper network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.dhclient (/etc/apparmor.d/sbin.dhclient line 73): profile /sbin/dhclient network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.klogd (/etc/apparmor.d/sbin.klogd line 35): profile /sbin/klogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslog-ng (/etc/apparmor.d/sbin.syslog-ng line 52): profile /sbin/syslog-ng network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/sbin.syslogd (/etc/apparmor.d/sbin.syslogd line 40): profile /sbin/syslogd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile /usr/lib/chromium-browser/chromium-browser network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_java network rules not enforced Warning from /etc/apparmor.d/usr.bin.chromium-browser (/etc/apparmor.d/usr.bin.chromium-browser line 165): profile browser_openjdk network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-previewer network rules not enforced Warning from /etc/apparmor.d/usr.bin.evince (/etc/apparmor.d/usr.bin.evince line 142): profile /usr/bin/evince-thumbnailer network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.deliver (/etc/apparmor.d/usr.lib.dovecot.deliver line 24): profile /usr/lib/dovecot/deliver network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.dovecot-auth (/etc/apparmor.d/usr.lib.dovecot.dovecot-auth line 24): profile /usr/lib/dovecot/dovecot-auth network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap (/etc/apparmor.d/usr.lib.dovecot.imap line 23): profile /usr/lib/dovecot/imap network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.imap-login (/etc/apparmor.d/usr.lib.dovecot.imap-login line 22): profile /usr/lib/dovecot/imap-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.managesieve-login (/etc/apparmor.d/usr.lib.dovecot.managesieve-login line 22): profile /usr/lib/dovecot/managesieve-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3 (/etc/apparmor.d/usr.lib.dovecot.pop3 line 22): profile /usr/lib/dovecot/pop3 network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.dovecot.pop3-login (/etc/apparmor.d/usr.lib.dovecot.pop3-login line 21): profile /usr/lib/dovecot/pop3-login network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/mission-control-5 network rules not enforced Warning from /etc/apparmor.d/usr.lib.telepathy (/etc/apparmor.d/usr.lib.telepathy line 86): profile /usr/lib/telepathy/telepathy-* network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.avahi-daemon (/etc/apparmor.d/usr.sbin.avahi-daemon line 30): profile /usr/sbin/avahi-daemon network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/lib/cups/backend/cups-pdf network rules not enforced Warning from /etc/apparmor.d/usr.sbin.cupsd (/etc/apparmor.d/usr.sbin.cupsd line 170): profile /usr/sbin/cupsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dnsmasq (/etc/apparmor.d/usr.sbin.dnsmasq line 51): profile /usr/sbin/dnsmasq network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.dovecot (/etc/apparmor.d/usr.sbin.dovecot line 37): profile /usr/sbin/dovecot network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.identd (/etc/apparmor.d/usr.sbin.identd line 31): profile /usr/sbin/identd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mdnsd (/etc/apparmor.d/usr.sbin.mdnsd line 35): profile /usr/sbin/mdnsd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.mysqld (/etc/apparmor.d/usr.sbin.mysqld line 44): profile /usr/sbin/mysqld network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nmbd (/etc/apparmor.d/usr.sbin.nmbd line 21): profile /usr/sbin/nmbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.nscd (/etc/apparmor.d/usr.sbin.nscd line 46): profile /usr/sbin/nscd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.smbd (/etc/apparmor.d/usr.sbin.smbd line 40): profile /usr/sbin/smbd network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.tcpdump (/etc/apparmor.d/usr.sbin.tcpdump line 64): profile /usr/sbin/tcpdump network rules not enforced Cache read/write disabled: /sys/kernel/security/apparmor/features interface file missing. (Kernel needs AppArmor 2.4 compatibility patch.) Warning from /etc/apparmor.d/usr.sbin.traceroute (/etc/apparmor.d/usr.sbin.traceroute line 26): profile /usr/sbin/traceroute network rules not enforced * Starting AppArmor profiles [160G [154G[ OK ] speech-dispatcher disabled; edit /etc/default/speech-dispatcher Checking for running unattended-upgrades: What does this warnings mean and how can I fix it? Informations about my system: response@response:~$ uname -a Linux response 3.3.0-030300-generic #201203182135 SMP Mon Mar 19 01:43:18 UTC 2012 i686 i686 i386 GNU/Linux

    Read the article

  • crash when using wireless network

    - by Erik
    ubuntu 12.04 32 bit When I start up my system almost instantly freezes, I found that the problem lays with my wireless network, because the crash is always t the same time as the message that tells me I am connected to a network when I start up connected to a cable everything works fine, I can even see that I am connected to our wireless network, until I unplug the ethernet cable, then it all freezes again the same happened when I boot from a live cd (from usb) The problem only occurs on my netbook, my laptop doesn't give any problems. I don't know if anyone else has had similar problems, or if anyone knows a solution... Thanks in advance! greetings Erik EDIT (21/3/2012): it seems there is some external factor involved, I'm using my netbook for about 50 minutes now while connected to the wireless network, and still it didn't crash strange enough, before these 50 minutes I had to put it down by holding the power button, because I decided to try it again, that time it did crash... before (while connected with an ethernet cable) I've been trying to get my Bluetooth working, that didn't succeed entirely, but I guess that might be a factor in the question why it doesn't crash at the moment now I rebooted, connected, and no crash... if it crashes again, I'll update this post again. in the meantime, if anyone has an idea on what could be a factor, and on how to create a crash using that factor, feel free to ask!

    Read the article

  • wireless detected but Can't connect to network, Wifi card intel pro wireless N100 BGN

    - by Alexandre777
    Thanks in advance, I installed Linux Mint kernel 3.0.0-12 x64 ,wireless is detected and I configure it in network manager but can't coonect, there are the results of command line: $ iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=off Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off $ sudo lshw -C network** *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:03:00.0 logical name: wlan0 version: 00 serial: 00:1e:64:51:c9:d6 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:48 memory:d7400000-d7401fff *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: c0 serial: 48:5b:39:99:8f:16 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.2 latency=0 link=yes multicast=yes port=twisted pair speed=100Mbit/s resources: irq:51 memory:d3800000-d383ffff ioport:8000(size=128 $ rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no Thank you.

    Read the article

  • ubuntu eth0 not reconnecting after cable unplugged

    - by Alex
    I'm running kubuntu 9.10 w/ gnome, I have a static IP defined in /etc/network/interfaces When I unplugged my network cable and rebooted, then reconnected the network cable I was not able to connect. I tried using sudo ifup eth0, and then ifconfig and it seemed as though the IP address had been assigned and I was connected, but I wasn't. I then did ifdown eth0, and again ifup eth0. For some reason I'm not able to access the network. Furthermore, I also attempted to connect via wlan, and was able to connect to the wireless network, but cannot "see" the network. I can't transfer data or access the internet or anything on the network including the router. How do I resolve this? topsy@monolyth:~$ ifconfig eth0 Link encap:Ethernet HWaddr 00:1c:25:1c:df:70 inet addr:192.168.1.145 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::21c:25ff:fe1c:df70/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:5720 errors:0 dropped:0 overruns:0 frame:0 TX packets:565 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:100 RX bytes:378035 (378.0 KB) TX bytes:46832 (46.8 KB) Memory:fe000000-fe020000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:0 TX packets:4 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:240 (240.0 B) TX bytes:240 (240.0 B) By access the network I mean the local network as well as the internet. topsy@monolyth:~$ ping 192.168.1.1 PING 192.168.1.1 (192.168.1.1) 56(84) bytes of data. 64 bytes from 192.168.1.1: icmp_seq=1 ttl=64 time=9.14 ms 64 bytes from 192.168.1.1: icmp_seq=2 ttl=64 time=1.24 ms 64 bytes from 192.168.1.1: icmp_seq=3 ttl=64 time=1.01 ms 64 bytes from 192.168.1.1: icmp_seq=4 ttl=64 time=1.00 ms [snip... all OK, icmp_seq from 5-30, time between 0.981-1.25ms] ^C --- 192.168.1.1 ping statistics --- 30 packets transmitted, 30 received, 0% packet loss, time 29035ms rtt min/avg/max/mdev = 0.971/1.300/9.140/1.458 ms topsy@monolyth:~$ route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 0 0 0 eth0 link-local * 255.255.0.0 U 1000 0 0 eth0 default 192.168.1.1 0.0.0.0 UG 100 0 0 eth0 root@monolyth:~# cat /etc/resolv.conf # Generated by NetworkManager

    Read the article

  • Unable to Connect to Internet with 3G USB Dongle for Particular ISP

    - by Kush
    I'm using USB 3G Dongle for Internet. Previously I was using Tata Docomo (India) as provider, and the Internet was working fine. Now I've changed to BSNL, but I'm unable to connect to the Internet on Ubuntu. However, I've checked access point settings and other configuration which are required for BSNL, and it is working fine with same Dongle on Windows 7. Also, I'm able to connect Internet with other providers on Ubuntu, but problem persists only with Ubuntu. The access point for BSNL in my region is bsnlnet. In fact I configure the Dongle with BSNL using default Network Configuration wizard that pops up when USB Dongle is attached. When Dongle is attached and configured with BSNL, I can see network strength in Messaging menu, in Mobile Broadband category, of Ubuntu (note: my network icon still shows "not connected" status). And when I try to use the connection that I've created, it fails to connect. So far, I tried using Sakis3g script that I came up with while wandering over this issue on other forums, it didn't worked either. I also made sure that there are no special configuration made for BSNL on my Windows 7 installation, and still it is working fine there, the problem is only with Ubuntu. How can I fix it?

    Read the article

  • Can't add NetworkManager applet to gnome panel

    - by Nate
    I have researched this problem extensively and I can't seem to find an answer. In Ubuntu 10.04 LTS, I want to connect to my VPN through the NetworkManager applet. I installed all the network manager packages, including the gnome client. I understand I need to add the "Notification Area" to the panel, which I have done. I checked that the NetworkManager is running: nate@nate-desktop:~$ service network-manager status network-manager start/running, process 763 In /etc/NetworkManager/nm-system-settings.conf, I have added managed=true (don't know if this matters, but I saw it suggested on one forum): nate@nate-desktop:~$ more /etc/NetworkManager/nm-system-settings.conf # This file is installed into /etc/NetworkManager, and is loaded by # NetworkManager by default. To override, specify: '--config file' # during NM startup. This can be done by appending to DAEMON_OPTS in # the file: # # /etc/default/NetworkManager # [main] plugins=ifupdown,keyfile [ifupdown] #managed=false managed=true I restarted NetworkManager and tried rebooting, too. At this point, it looks like NetworkManager is running but it's not appearing in the NotificationArea of the panel. I don't know what else to try. Any ideas?

    Read the article

  • Qualcomm Gobi WWAN modem no longer appears in Network Manager

    - by Andy E
    Not sure what happened here. I installed Cinnamon on my Ubuntu 12.10 environment yesterday, rebooted when finished and everything was working fine. I even used my WWAN modem after my fixed line broadband went down. However, after starting my machine this morning and seeing that my fixed line is still having problems (intermittently), I clicked the network applet and my WWAN device wasn't listed. It's not in the main network manager window either. It is still present on the system, however: $ lsusb Bus 001 Device 003: ID 05ca:18b0 Ricoh Co., Ltd Sony Vaio Integrated Webcam Bus 001 Device 004: ID 05c6:9221 Qualcomm, Inc. Gobi Wireless Modem (QDL mode) Bus 002 Device 005: ID 04e8:6865 Samsung Electronics Co., Ltd Bus 002 Device 002: ID 0409:005a NEC Corp. HighSpeed Hub Bus 003 Device 002: ID 147e:1000 Upek Biometric Touchchip/Touchstrip Fingerprint Sensor Bus 008 Device 002: ID 044e:3017 Alps Electric Co., Ltd BCM2046 Bluetooth Device Debug output from modem-manager, refers to a device that is blacklisted: modem-manager[10186]: [1355478137.024491] [mm-manager.c:866] device_added(): (tty/ttyUSB0): port's parent device is blacklisted modem-manager[10186]: [1355478137.024607] [mm-manager.c:875] device_added(): (tty/ttyS0): port's parent platform driver is not whitelisted modem-manager[10186]: [1355478137.024700] [mm-manager.c:875] device_added(): (tty/ttyS1): port's parent platform driver is not whitelisted ... I couldn't see anything relevant in the debug output for network-manager, but I've created a paste for it just in case. In /lib/udev/rules.d/77-mm-qdl-device-blacklist.rules, I found the following line that matches the device IDs from the lsusb output: # Generic Gobi QDL device ATTRS{idVendor}=="05c6", ATTRS{idProduct}=="9221", ENV{ID_MM_DEVICE_IGNORE}="1" I tried commenting out the second line and restarting network-manager/modem-manager but it didn't help. I've no idea where to go from here, does anyone else have any ideas?

    Read the article

  • How do I get network working on a Dell n5010 - Ubuntu 10.04

    - by cyberroger
    Hey. I just formatted a Dell n5010 and installed Ubuntu 10.04. Now,when i try to access the Internet it doesn't find the available networks. Informations about it: My network is set to broadcast SSID; Already typed lspci, and it doesnt returns my wireless card; Tried installing windows drivers from fabricant cd usind diswrapper, but it says it cant complete the installation because it cant find some "Device" folder; I don't know what else to do, I switch the wireless button on/off and it just can't see any wireless connection, includin mine. Here are the informations about lspci: *-network UNCLAIMED description: Network controller product: Broadcom Corporation vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:12:00.0 version: 01 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:fbc00000-fbc03fff And this: 00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18) 00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18) 00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06) 00:1a.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06) 00:1c.0 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 1 (rev 06) 00:1c.1 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 2 (rev 06) 00:1c.2 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 3 (rev 06) 00:1c.4 PCI bridge: Intel Corporation 5 Series/3400 Series Chipset PCI Express Root Port 5 (rev 06) 00:1d.0 USB Controller: Intel Corporation 5 Series/3400 Series Chipset USB2 Enhanced Host Controller (rev 06) 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev a6) 00:1f.0 ISA bridge: Intel Corporation Mobile 5 Series Chipset LPC Interface Controller (rev 06) 00:1f.2 SATA controller: Intel Corporation 5 Series/3400 Series Chipset 6 port SATA AHCI Controller (rev 06) 00:1f.3 SMBus: Intel Corporation 5 Series/3400 Series Chipset SMBus Controller (rev 06) 00:1f.6 Signal processing controller: Intel Corporation 5 Series/3400 Series Chipset Thermal Subsystem (rev 06) 12:00.0 Network controller: Broadcom Corporation Device 4727 (rev 01) 13:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller (rev 02) Thanks!

    Read the article

  • two possible wifi devices competing, one is hard blocked - unable to connect wireless

    - by patrickmw
    blacklisted acer_wmi because that was showing up in the rfkill list then ideapad_wlan was listed $ rfkill list wifi 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes $ lshw -C network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:12:21:e9 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.139 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:42 memory:f0400000-f043ffff ioport:2000(size=128) *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: ac:81:12:38:ba:89 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff contents of /var/lib/NetworkManager/NetworkManager.state [main] NetworkingEnabled=true WirelessEnabled=true WWANEnabled=true I'm not sure how to disable the wifi devices independently. I'm also not sure which device is the correct one. I think its the brcmw device. Any suggestions?

    Read the article

  • two possible wifi devices competing, one is hard blocked

    - by patrickmw
    blacklisted acer_wmi because that was showing up in the rfkill list then ideapad_wlan was listed $ rfkill list wifi 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 3: brcmwl-0: Wireless LAN Soft blocked: no Hard blocked: yes $ lshw -C network *-network description: Ethernet interface product: AR8131 Gigabit Ethernet vendor: Atheros Communications physical id: 0 bus info: pci@0000:03:00.0 logical name: eth0 version: c0 serial: f0:de:f1:12:21:e9 size: 1Gbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vpd bus_master cap_list ethernet physical tp 10bt 10bt-fd 100bt 100bt-fd 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=atl1c driverversion=1.0.1.0-NAPI duplex=full firmware=N/A ip=192.168.1.139 latency=0 link=yes multicast=yes port=twisted pair speed=1Gbit/s resources: irq:42 memory:f0400000-f043ffff ioport:2000(size=128) *-network description: Wireless interface product: BCM4313 802.11b/g/n Wireless LAN Controller vendor: Broadcom Corporation physical id: 0 bus info: pci@0000:04:00.0 logical name: eth1 version: 01 serial: ac:81:12:38:ba:89 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=wl0 driverversion=5.100.82.38 latency=0 multicast=yes wireless=IEEE 802.11 resources: irq:17 memory:f0500000-f0503fff I'm not sure how to disable the wifi devices independently. I'm also not sure which device is the correct one. I think its the brcmw device. Any suggestions?

    Read the article

  • make my Ubuntu 12.04 laptop visible on the network

    - by Andrew Boyd
    I'm ecstatically happy with my 12.04 on my laptop after loading it over my MS Vista... but there's just one thing, one little fly in the ointment.... While I can view our 2 Terabyte, shared hard-drive in the lounge (and copy files back and forth) I can't see my PC (when I boot up in Ubuntu 12.04) nor the Lubuntu computer connected to the TV (for movies, Youtube etc). Printing to the HP office jet on the PC doesnt work over the network either. Have had one dubious flirtation with Samba, which seems to be the only thing I've found that will 'work', however halfway through that "installation" everything just ground to a halt, the directions began to stop making sense... I was working from this page. Our Network consists of the following: Our Internet service is wirelessly sent to us from our provider to our dish on a pole. It comes into the house via an ethernet cable. We split it there to a phone, and to 6 other destinations (bedrooms, computers, and to another splitter in the lounge which has a wifi antennae and 4 ethernet ports). one port goes to the Lubuntu OS PC which is connected to the TV the second port goes to the 2 Terabyte harddrive (MS powered 'Mybooklive') (the other two are empty) My Ubuntu 12.04 laptop connects wirelessly to this splitter in the lounge. I know just enough about computers to get myself into an awful mess without too much trouble We usually can view friends' laptops when they get on our network (as they are invariably MS OS's) Our flatmate, who introduced us to Linux's computer is also invisible How can we make our Linux OS based computers visible on the network and share files and printing?

    Read the article

  • Ubuntu 12.04 connected to wireless network but internet not working

    - by A.J.
    I can connect to my house's wireless network just fine, but when I'm connected I can't browse the web. Firefox starts connecting to a site and then just poops out. This doesn't happen on my roommates' computers (running Windows) or on our 3DSes, so I know it's just my laptop. I already tried sudo dhclient -r sudo dhclient sudo ifconfig eth0 down sudo ifconfig eth0 up Results of a few commands I was asked to run in comments: ping -c 2 4.2.2.2 PING 4.2.2.2 (4.2.2.2) 56(84) bytes of data. ^C --- 4.2.2.2 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms ping -c 2 google.com PING google.com (173.194.33.38) 56(84) bytes of data. --- google.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1006ms nm-tool NetworkManager Tool State: connected (global) - Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: atl1c State: unavailable Default: no HW Address: 88:AE:1D:6B:4E:E7 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: off - Device: wlan0 [JUSTICE] ----------------------------------------------------- Type: 802.11 WiFi Driver: ath9k State: connected Default: yes HW Address: 1C:65:9D:65:C6:31 Capabilities: Speed: 1 Mb/s Wireless Properties WEP Encryption: yes WPA Encryption: yes WPA2 Encryption: yes Wireless Access Points (* = current AP) HOME-9B18: Infra, 00:26:F3:53:9B:18, Freq 2412 MHz, Rate 54 Mb/s, Strength 34 WPA WPA2 cougdad48 Network: Infra, 60:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 22 WPA2 cougdad48 Guest Network: Infra, 66:33:4B:E4:C4:5D, Freq 2437 MHz, Rate 54 Mb/s, Strength 20 WPA2 belkin.ade: Infra, 94:44:52:FF:8A:DE, Freq 2457 MHz, Rate 54 Mb/s, Strength 20 WPA WPA2 *JUSTICE: Infra, 00:24:01:7B:9F:7E, Freq 2462 MHz, Rate 54 Mb/s, Strength 88 WEP CenturyLink: Infra, B2:B2:DC:8E:E2:58, Freq 2462 MHz, Rate 54 Mb/s, Strength 17 WPA WPA2 IPv4 Settings: Address: 192.168.0.11 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.1 DNS: 192.168.0.1 (JUSTICE is my home's network.) ping -c 2 198.168.0.1 PING 198.168.0.1 (198.168.0.1) 56(84) bytes of data. --- 198.168.0.1 ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms

    Read the article

  • Reverse WiFi to Broadcast connection coming from a USB device

    - by Daniel Clem
    I am using the app called Clockworkmod Tether. It connects using a script ( command line " gksu ./run.sh " ) on the computer. All my programs connect to the internet perfectly, minitube, midori, transmission torrents. But the network manager does not show any connection, wired or wireless. So this may cause issues? What I want to do is take this connection, and be able to share it some way, any way, by wireless. This Acer Timeline "Aspire 5810TZ" does have an Ethernet, so wired out to a router might be an option. But I would prefer to simply reverse the Wireless card to broadcast out to about 2 or 3 devices. Is this possible? Yes I have taken a look at the other questions already posted here, but the answers are 1 year old or older, and not clear at all. I am moderately comfortable (4.5 out of 10 ) on the command line. But pretty much need line by line directions for what commands are needed and what order, ect. Edit I have already tried the method of "Left click network manager, Create New Wireless Network" It is created fine, and I am able to connect to it with a tablet, but am un-able to get an outside connection with it. Using the "Shared to other computers" option because DHCP doesn't seem to work, and WEP Passphrase Security. I get an IP address on the connected device. But as I said, won't bring up any outside webpages or the like. So perhaps this is the wrong approach?

    Read the article

  • Struggles to connect to network when using WPA with a BCM43225

    - by pst007x
    When booting my laptop, it will try to connect to my wireless network, however a window keeps popping up asking me for my security password, which has already been saved. I have to keep deleting my network settings, and reconnecting, otherwise it keeps failing to connect. My wireless is set up with a WPA, I do not want to lower my security because of this, but it is a pain and can take me 15mins plus to finally connect. The problem has only become apparent since a fresh install of 11.10. IPV6 disabled. System info: 01:00.0 Ethernet controller: Broadcom Corporation NetLink BCM57780 Gigabit Ethernet PCIe (rev 01) Subsystem: Acer Incorporated [ALI] Device 036d Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at b3400000 (64-bit, non-prefetchable) [size=64K] Capabilities: <access denied> Kernel driver in use: tg3 Kernel modules: tg3 02:00.0 Network controller: Broadcom Corporation BCM43225 802.11b/g/n (rev 01) Subsystem: Broadcom Corporation Device 04da Flags: bus master, fast devsel, latency 0, IRQ 17 Memory at b2400000 (64-bit, non-prefetchable) [size=16K] Capabilities: <access denied> Kernel driver in use: brcmsmac Kernel modules: wl, brcmsmac ADDITIONAL: In terminal I get this: pst007x@pst007x-ubuntu64:~$ nm-applet start ** Message: applet now removed from the notification area ** (nm-applet:2816): DEBUG: old state indicates that this was not a disconnect 0 ** Message: using fallback from indicator to GtkStatusIcon ** Message: applet now embedded in the notification area ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. ** (nm-applet:2816): DEBUG: foo_client_state_changed_cb Note this line: ** Message: No keyring secrets found for Auto Access 01/802-11-wireless-security; asking user. At this point is where I am asked for the password. Please report WPA issues with Ubuntu 11.10 here: https://bugs.launchpad.net/ubuntu/+source/network-manager/+bug/892727

    Read the article

  • Sharing an internet connection through the Ethernet port

    - by Bob Cunningham
    I have a small living room PC (Bohica, running fully-updated Ubuntu 10.10/Maverick) connected to my HDTV that I use for web browsing and media streaming. It connects via WiFi (wlan0) to my Fedora server (Snafu) that in turn connects to the internet. I use static addressing, and everything has been working fine. I just got a Blu-ray player, and I'd like to give it wired network access to the internet via Bohica's available wired ethernet port (eth0). So far, I haven't been to get eth0 and the network configured to get the Blu-ray player talking to the internet. Here's my wlan0 configuration: ip4 addr: 192.168.0.100 mask: /24 (255.255.255.0) gateway: 192.168.0.4 (fedora box) The Blu-ray player is set to an IP of 192.168.0.98/24, with the same gateway as above. I want eth0 set to an IP of 192.168.0.99/24, but when I do this using nm-connection-editor I lose internet access (the system tries to use eth0 as the default internet access interface). How do I get my blu-ray player to talk to the internet through Bohica, and do so without disrupting my current (working) network? Thanks. Edit: Here's the relevant output from nm-tool with the Blu-ray player connected: $ nm-tool NetworkManager Tool State: connected - Device: eth0 Type: Wired Driver: forcedeth State: disconnected Default: no HW Address: 90:FB:A6:2C:94:32 Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on - Device: wlan0 [wlan0] Type: 802.11 WiFi Driver: ndiswrapper State: connected Default: yes HW Address: 00:26:5A:C0:D0:05 IPv4 Settings: Address: 192.168.0.100 Prefix: 24 (255.255.255.0) Gateway: 192.168.0.4

    Read the article

  • IPv6 tunnels - any easy way to turn them on and off?

    - by Rob Hoare
    I've set up a tunnelbroker.net (Hurricane Electric) IPv6 tunnel from my laptop running 12.04. Works fine, and allows me to test the dual-stack configuration on my remote webservers etc. until native IPv6 is available on my ISP. However, there are times when I don't want the tunnel. For example if I'm accessing something that requires an IPv4 address in my own country rather than the Tunnelbroker tunnel endpoint, or if I'm away from the local IPv4 tunnel endpoint, or if I simply want to test without IPv6. Is there a simple way to disable and then re-enable the IPv6 tunnel, without rebooting? For context, here's what's in my /etc/network/interfaces (NNN replaces numbers): auto he-ipv6 iface he-ipv6 inet6 v4tunnel endpoint 216.218.NNN.NNN address 2001:470:NNN:NNN::2 netmask 64 up ip -6 route add default dev he-ipv6 down ip -6 route del default dev he-ipv6 Is there a network manager application (gui or command line) to selectively enable/disable parts of /etc/network/interfaces, or IPv6 in general? I found even by commenting out that out (and reloading networking) it's tough to get the IPv6 to go away. A "tunnel on/off" button in networking would be great, like using a VPN.

    Read the article

  • Wired connection problem through router

    - by tommypincha
    I'm having trouble to connect my Ubuntu 11.10 to internet through ethernet. I installed a router to get Wi-Fi and now (by a wired connection) I can't have internet with ubuntu (but I can with Windows 7). I see several attempts per minute of the network-manager to get a connection, but after a minute it stops trying. Here are a couple of outputs from key files: cat /etc/network/interfaces auto lo iface lo inet loopback and ifconfig -a eth0 Link encap:Ethernet HWaddr 00:16:76:e4:a6:e8 inet6 addr: fe80::216:76ff:fee4:a6e8/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:117 dropped:0 overruns:0 frame:117 TX packets:50 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:12221 (12.2 KB) lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:582 errors:0 dropped:0 overruns:0 frame:0 TX packets:582 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:46024 (46.0 KB) TX bytes:46024 (46.0 KB) I tried reconnecting the modem and the router and reconnecting the ethernet cable but nothing... I tried other solutions from other posts (this one has a similar issue Wired connection not working) but again nothing. My IP is dynamic. A couple of things I see and did: I see no inet addr, only inet6. I ignored ipv6 from the internet connections, and restarted the network-manager service and nothing. A difference with the post I mentioned is the RX packets with errors I have, is this a clue of the problem? Any help would be appreciated, Thanks!

    Read the article

  • Windows: "net use" equivalent that shows the username used to mount a share?

    - by Jeroen Wiert Pluimers
    Sometimes you need to use different credentials to map different shares, for instance net use z: \\myserver\myshare /user:mydomain\myusername mypassword You can use net use to show you the shares that are mapped, but it does not show the mydomain\myusername. What can I use to show that information? I'm looking for output like this from the imaginary command NetUseX: H:\>NetUseX New connections will be remembered. Status Local Remote Username Network ---------------------------------------------------------------------------------------------------------- OK D: \\MyServer1234\SomeData MyServer1234\MyUserA Microsoft Windows Network Unavailable E: \\MyServer4321\SomeApps MyDomain\MyUserB Microsoft Windows Network OK H: \\MyServer4321\HomeDAta MyDomain\MyUserB Microsoft Windows Network Disconnected W: \\MyServer6789\WorkData MyDomain\MyUserB Microsoft Windows Network OK \\MyServer9876\Shortcuts MyServer9876\MyUserC Microsoft Windows Network The command completed successfully.

    Read the article

  • Ubuntu 12.04 Network Manager: unable to save manual setting to set up a static ip

    - by Andy
    I am fairly familiar with setting up servers, and ubuntu is generally my flavor of choice, but I just installed 12.04 desktop and I am seeing some behavior in network manager that is really puzzling. The network connection works fine if I leave it set on dhcp, but I would like a static IP address for my new web server. When I go into network manager and edit the connection for the one and only NIC I can select MANUAL from the dropdown menu but as soon as I do the Save button becomes greyed out. Even after filling out all fields for the connection it is still grey and I am unable to save the static IP connection information. Any thoughts would be greatly appreciated. I'm hoping there is just some new setting that I am unaware of.... On another note, if I stop the network manager and go edit the interfaces file (and the appropriate hosts/routes/dns files), I do get a static ip address assigned and I can contact my server from the outside, however, the server cannot find the internet. Can't ping even its own ip... I can ping the loopback interface though. I'm really confused on this one. Hoping someone can offer some help.

    Read the article

  • Cannot connect to wireless network

    - by smr
    I am quite new to using Ubuntu 12.10. All I remember while installing Ubuntu 12.10 was that I didn't check any box specifically to enable wireless connectivity. I tried looking into the various questions posted here - most of them refer to certain commands (redundantly sudo) and things of that sort. I am quite new and wasn't sure of understanding what those commands were trying to do (the network configuration settings - showed up different options, like 'Wireless', 'Wired', 'IPv4', 'IPv6' etc -- I am not sure of what sort of settings are to be made - like for example what sort of 'WEP' settings etc are to be made. Although I wasn't able to connect to the wireless network, I was able to connect to the internet, once I plugged in the ethernet cable. Can someone help me with: 1) Understandng a way to see if Ubuntu is configured to connect to a wireless network. 2) If so - Getting to configure to a wireless network (setting up a new one). 3) Where in ubuntu, should I look for seeing if there are any hardware devices (such as the Broadcom wireless adapter or things of that sort - like the way we use the 'Device manager' in Windows to look into the adapter settings). 4) Reference material to learn and understand the various ubuntu commands. (things like the -lshw etc).

    Read the article

  • lshw not showing network

    - by triunenature
    Output: {User}@{Computer}:~$ sudo lshw -class network {User}@{Computer}:~$ Another Test: {User}@{Computer}:~$ lspci 00:00.0 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a1) 00:01.0 ISA bridge: NVIDIA Corporation MCP61 LPC Bridge (rev a2) 00:01.1 SMBus: NVIDIA Corporation MCP61 SMBus (rev a2) 00:01.2 RAM memory: NVIDIA Corporation MCP61 Memory Controller (rev a2) 00:02.0 USB controller: NVIDIA Corporation MCP61 USB 1.1 Controller (rev a3) 00:02.1 USB controller: NVIDIA Corporation MCP61 USB 2.0 Controller (rev a3) 00:04.0 PCI bridge: NVIDIA Corporation MCP61 PCI bridge (rev a1) 00:05.0 Audio device: NVIDIA Corporation MCP61 High Definition Audio (rev a2) 00:06.0 IDE interface: NVIDIA Corporation MCP61 IDE (rev a2) 00:07.0 Bridge: NVIDIA Corporation MCP61 Ethernet (rev a2) <<---- Network Card???? 00:08.0 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:08.1 IDE interface: NVIDIA Corporation MCP61 SATA Controller (rev a2) 00:09.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:0b.0 PCI bridge: NVIDIA Corporation MCP61 PCI Express bridge (rev a2) 00:18.0 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] HyperTransport Technology Configuration 00:18.1 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Address Map 00:18.2 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] DRAM Controller 00:18.3 Host bridge: Advanced Micro Devices [AMD] K8 [Athlon64/Opteron] Miscellaneous Control 01:05.0 FireWire (IEEE 1394): LSI Corporation FW322/323 (rev 70) 02:00.0 VGA compatible controller: NVIDIA Corporation G96 [GeForce 9500 GT] (rev a1) If you look at 00:07.0 I believe that is the network card. However lshw doesnt show it. I mainly need information on network speed 10MBpS/100MBsP/1000MBpS Though knowing why my system isn't working would be nice.

    Read the article

  • Emit Knowledge - social network for knowledge sharing

    - by hajan
    Emit Knowledge, as the words refer - it's a social network for emitting / sharing knowledge from users by users. Those who can benefit the most out of this network is perhaps all of YOU who have something to share with others and contribute to the knowledge world. I've been closely communicating with the core team of this very, very interesting, brand new social network (with specific purpose!) about the concept, idea and the vision they have for their product and I can say with a lot of confidence that this network has real potential to become something from which we will all benefit. I won't speak much about that and would prefer to give you link and try it yourself - http://www.emitknowledge.com Mainly, through the past few months I've been testing this network and it is getting improved all the time. The user experience is great, you can easily find out what you need and it follows some known patterns that are common for all social networks. They have some real good ideas and plans that are already under development for the next updates of their product. You can do micro blogging or you can do regular normal blogging… it’s up to you, and the way it works, it is seamless. Here is a short Question and Answers (QA) interview I made with the lead of the team, Marijan Nikolovski: 1. Can you please explain us briefly, what is Emit Knowledge? Emit Knowledge is a brand new knowledge based social network, delivering quality content from users to users. We believe that people’s knowledge, experience and professional thoughts compose quality content, worth sharing among millions around the world. Therefore, we created the platform that matches people’s need to share and gain knowledge in the most suitable and comfortable way. Easy to work with, Emit Knowledge lets you to smoothly craft and emit knowledge around the globe. 2. How 'old' is Emit Knowledge? In hamster’s years we are almost five years old start-up :). Just kidding. We’ve released our public beta about three months ago. Our official release date is 27 of June 2012. 3. How did you come up with this idea? Everything started from a simple idea to solve a complex problem. We’ve seen that the social web has become polluted with data and is on the right track to lose its base principles – socialization and common cause. That was our start point. We’ve gathered the team, drew some sketches and started to mind map the idea. After several idea refactoring’s Emit Knowledge was born. 4. Is there any competition out there in the market? Currently we don't have any competitors that share the same cause. What makes our platform different is the ideology that our product promotes and the functionalities that our platform offers for easy socialization based on interests and knowledge sharing. 5. What are the main technologies used to build Emit Knowledge? Emit Knowledge was built on a heterogeneous pallet of technologies. Currently, we have four of separation: UI – Built on ASP.NET MVC3 and Knockout.js; Messaging infrastructure – Build on top of RabbitMQ; Background services – Our in-house solution for job distribution, orchestration and processing; Data storage – Build on top of MongoDB; What are the main reasons you've chosen ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 6. What are the main reasons for choosing ASP.NET MVC? Since all of our team members are .NET engineers, the decision was very natural. ASP.NET MVC is the only Microsoft web stack that sticks to the HTTP behavioral standards. It is easy to work with, have a tiny learning curve and everyone who is familiar with the HTTP will understand its architecture and convention without any difficulties. 7. Did you use some of the latest Microsoft technologies? If yes, which ones? Yes, we like to rock the cutting edge tech house. Currently we are using Microsoft’s latest technologies like ASP.NET MVC, Web API (work in progress) and the best for the last; we are utilizing Windows Azure IaaS to the bone. 8. Can you please tell us shortly, what would be the benefit of regular bloggers in other blogging platforms to join Emit Knowledge? Well, unless you are some of the smoking ace gurus whose blogs are followed by a large number of users, our platform offers knowledge based segregated community equipped with tools that will enable both current and future users to expand their relations and to self-promote in the community based on their activity and knowledge sharing. 10. I see you are working very intensively and there is already integration with some third-party services to make the process of sharing and emitting knowledge easier, which services did you integrate until now and what do you plan do to next? We have “reemit” functionality for internal sharing and we also support external services like: Twitter; LinkedIn; Facebook; For the regular bloggers we have an extra cream, Windows Live Writer support for easy blog posts emitting. 11. What should we expect next? Currently, we are working on a new fancy community feature. This means that we are going to support user groups to be formed. So for all existing communities and user groups out there, wait us a little bit, we are coming for rescue :). One of the top next features they are developing is the Community Feature. It means, if you have your own User Group, Community Group or any other Group on which you and your users are mostly blogging or sharing (emitting) knowledge in various ways, Emit Knowledge as a platform will help you have everything you need to promote your group, make new followers and host all the necessary stuff that you have had need of. I would invite you to try the network and start sharing knowledge in a way that will help you gather new followers and spread your knowledge faster, easier and in a more efficient way! Let’s Emit Knowledge!

    Read the article

  • Open ports in Windows 7, firewall, public network, port 445

    - by chris
    I selected "public network" in Windows 7. Windows is listening on TCP port 445: TCP 0.0.0.0:445 WIN7TEST:0 ABHÖREN The corresponding incoming firewall rule isn't activated (4th column): When I choose "workplace network" the SMB incoming port 445 rule is still disabled in the advanced windows firewall configuration. I thought "public network" / "workplace network" and so on is influencing the windows firewall rules!? Where's the difference between workplace and public network then? http://www.abload.de/image.php?img=winfire2nxku0.png

    Read the article

  • Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

    - by Rhys
    I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7. UPDATE For those still having problems here is the answer to my issue and the possible reasons why:- Win7 keeps a list of the networks you visit by (I am assuming, but don’t know for sure) the MACID of the device pointed to by the Default Gateway. The default gateway is usually the constant device in a network (i.e. the NAT or router) so can be used to uniquely identify one network from another. The default gateway in the IPv4 properties panel must therefore point to an actual endpoint so windows can then keep track of it. If there is a device at the end of the Default Gateway windows will identify it and track it remembering its settings. The ways you can therefore fool Win7 is to either point the default gateway to your own IP address, or the IP address of the target device you’re communicating with. This will have the side effect of expecting that target device to start routing packets for IP destinations that are outside your subnet. So some applications on Win7 will try to communicate with the internet, these will be passed on to the default gateway (either back you the same IP address or a target device that is not a router) and thus will eventually timeout because neither can route packets. Which you can usually live with. This gets slightly complicated when you mix a this type of connection with a real connection to the internet via WIFI. The wired network card usually has priority when routing because of the “interface metric” so some applications might not connect correctly.

    Read the article

  • Copying between 2 network devices

    - by Dave Rook
    My network has 3 devices - 1 PC and 2 other network devices (which could be PC, NAS, external hard drive etc) If I want to copy data from one network device to another network device from my PC (using the copy and paste method (i.e right click a file, select copy and then right click into the destination folder and click paste) and therefore not using any tools that could be built into the network devices for such a transaction), does the data get routed via my PC or use my systems resources?

    Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >