Search Results

Search found 11364 results on 455 pages for 'port blocking'.

Page 42/455 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• Touchpad does not respond when I am holding key on the keyboard

  - by Tadeck

  I am experiencing strange problem with using my touchpad and keyboard simultaneously under Windows 7. I have HP tx2550ew (convertible tablet), and when I hold some key under Windows 7 (eg. space, a, s etc.), the touchpad seems to be blocking. I spotted this while playing Counter Strike. I am not playing much games, and I haven't been playing CS since January, so I am not sure when it started behaving like that. I have tested it also outside the game - when I hold space (eg. when on some web page and entering text into input field) or some letter key, the cursor is not able to move. The problem seems to not be occuring when I hold Shift, Ctrl nor Alt. Did any of you experience similar problem? Do you know what may have caused this? Is there any way I could check what is wrong with my laptop? I have been looking for a solution, but it seems I haven't been looking in right places. This is why I ask question here. Ps. I am unable to test whether this is touchpad-specific, because I have no mouse at my disposal at the moment (got used to touchpad so much I even find it more efficient and haven't been using a mouse with my laptop for months).

  Read the article

• Reverse NAT Setup for Hyper-V on Win 2008 R2

  - by sukru

  I'm trying to setup a Linux server behind a Windows Hyper-V host that will help supply some of the services (SSH, HTTPS, etc). However getting RRAS configured for reverse NAT (port forwarding) turned out to be a non trivial task. As a staring point, I tried forwarding port 22 (SSH) to the virtual machine. The virtual machine is on a public interface (i.e.: it also has a visible IP on the same network as the host). On RRAS management console I tried to add a rule, by adding "Local Area Connection" to NAT pool (Public Interface - Enable Nat), and an incoming rule for port 22 - :22. I also tried with the same port enabled on Windows Firewall (and not). The NAT management page tells there are "1 mappings" and "30+ Outbound packets transleted". However all other counters (Inbound packets translated, and respective rejected ones) are always zero. (I'm trying to access the server from an external machine). I can directly access the service if I give the VM's public IP, but not the host's one. Is there a way to enable this on RRAS?

  Read the article

• Can't reach server without proxy (website down from my home)

  - by user2128576

  I have a website hosted on Hostinger However I am experiencing problems with my wordpress site. This is really annoying. If I understood the situation right, The server is blocking me or denying access to my own website. When I visit the site with google chrome, it returns: Oops! Google Chrome could not find Same thing happens to firefox! Firefox can't find the server but when I do a check if my site is online and working through http://www.downforeveryoneorjustme.com/ it says that the site is working and up. Another thing, I access the website through a proxy, both on chrome and in firefox, and t works. Why is this? I have also recently installed the plugin Better Wp Security 5 days ago. Could the plugin have caused it? but I don't remember setting any IP's to be blocked. Also, this happens at random times, sometimes I can access it, sometimes it fails to reach the server. I am currently developing the site live. Was I blocked by the server for frequently refreshing the page? (duh, I'm a developer and I need to refresh to see changes.) or is this a problem with my ISP's DNS server? How can I resolve? and what are the possible fixes? Thanks in advance! -Jomar

  Read the article

• C++ Winsock non-blocking/async UDP socket

  - by Ragnagard

  Hi all! I'm developping a little data processor in c++ over UDP sockets, and have a thread (just one, and apart the sockets) that process the info received from them. My problem happens when i need to receive info from multiple clients in the socket at the same time. How could i do something like: Socket foo; /* init socket vars and attribs */ while (serving){ thread_processing(foo_info); } for multiple clients (many concurrent access) in c++? I'm using winsocks atm on win32, but just get standard blocking udp sockets working. No gui, it's a console app. I'll appreciate so much an example or pointer to one ;). Thanks in advance.

  Read the article

• Simple, non-blocking way to sleep?

  - by OverTheRainbow

  Hello I googled for this and read some threads here, but I haven't found a simple way to have a VB.Net application sleep for a little while and still keep the application responsive: Imports System.Net Imports System.IO Imports System.Text Imports System.Text.RegularExpressions Imports System.Threading.Thread [...] 'How to keep screen frop freezing? While True ListBox1.Items.Clear() ListBox1.Items.Add("blah") 'Not much difference ListBox1.Refresh() 'Wait 1mn Sleep(60000) End While Is there really no simple, non-blocking solution to have a VB.Net application wait for a few seconds? Thank you.

  Read the article

• non blocking tcp connect with epoll

  - by doccarcass

  My linux application is performing non-blocking TCP connect syscall and then use epoll_wait to detect three way handshake completion. Sometimes epoll_wait returns with both POLLOUT & POLLERR revents set for the same socket descriptor. I would like to understand what's going on at TCP level. I'm not able to reproduce it on demand. My guess is that between two calls to epoll_wait inside my event loop we had a SYN+ACK/ACK/FIN sequence but again I'm not able to reproduce it. Any clue ? Regards, Seb

  Read the article

• Writing a blocking wrapper around twisted's IRC client

  - by Andrey Fedorov

  I'm trying to write a dead-simple interface for an IRC library, like so: import simpleirc connection = simpleirc.Connect('irc.freenode.net', 6667) channel = connection.join('foo') find_command = re.compile(r'google ([a-z]+)').findall for msg in channel: for t in find_command(msg): channel.say("http://google.com/search?q=%s" % t) Working from their example, I'm running into trouble (code is a bit lengthy, so I pasted it here). Since the call to channel.__next__ needs to be returned when the callback <IRCClient instance>.privmsg is called, there doesn't seem to be a clean option. Using exceptions or threads seems like the wrong thing here, is there a simpler (blocking?) way of using twisted that would make this possible?

  Read the article

• Java Non-Blocking HTTP Server

  - by Marcus

  I have written an application using embedded Jetty that makes network calls to other services. I presume that the serving threads are idle whilst waiting for the network calls to complete. Is there any way to have a worker thread that switches between requests to perform work that can be done at the current time and then when the network calls return also handle that? A request would be returned when all work has been completed for it. I know this is a common paradigm, and I have used it for non-blocking TCP networking, but I'm unsure as to how to achieve this on a Java HTTP server whilst also waiting on external results. Any links or explanations are appreciated. Thanks

  Read the article

• My C# program running as Windows Service is blocking Windows XP from hibernation

  - by sherpa

  I have Windows Service written in C#. It starts two threads, one is pooling a Web Service, second is waiting on a Monitor object for a new job to arrive. Besides that, the main thread acts as a WCF service host using NetNamedPipeBinding. It lets the client application to register a callback and then sends notifications back. The problem I have is that when this Windows Service is running, I cannot hibernate or Standby my computer which is running on Windows XP, SP3. When I set Windows to hibernate or standby, nothing happens. Then, at the moment when I go to Service Manager and stop the service, the system hibernation starts immediately. The service class extending the ServiceBase has properties like CanHandlePowerEvent, CanPauseAndContinue, etc. set to true... That didn't make any difference. The question is: what can be blocking the Hibernation/Standby from proceeding? What should I take care about to avoid it?

  Read the article

• Java blocking socket returning incomplete ByteBuffer

  - by evandro-carrenho

  I have a socketChannel configured as blocking, but when reading byte buffers of 5K from this socket, I get an incomplete buffer sometimes. ByteBuffer messageBody = ByteBuffer.allocate(5*1024); messageBody.mark(); messageBody.order(ByteOrder.BIG_ENDIAN); int msgByteCount = channel.read(messageBody); Ocasionally, messageBody is not completely filled and channel.read() does not return -1 or an exception, but the actual number of bytes read (which is less than 5k). Has anyone experienced a similar problem?

  Read the article

• Force blocking read after EAGAIN?

  - by Daniel Trebbien

  I have a file descriptor that is open for reading which may be non-blocking. What I need to do is simply read all data until reaching EOF and write that data to a writable file descriptor. As the process that performs this copying is not "aware" of anything that is going on around it, I don't think that I can do something useful while waiting for data, and I don't want to use a while loop (while errno is not EAGAIN) because I think that it would be wasteful. Is there a way to block or otherwise suspend execution of the copying process until data becomes available?

  Read the article

• Sleeping a thread blocking stdin

  - by Sid

  Hey, I'm running a function which evaluates commands passed in using stdin and another function which runs a bunch of jobs. I need to make the latter function sleep at regular intervals but that seems to be blocking the stdin. Any advice on how to resolve this would be appreciated. The source code for the functions is def runJobs(comps, jobQueue, numRunning, limit, lock): while len(jobQueue) >= 0: print(len(jobQueue)); if len(jobQueue) > 0: comp, tasks = find_computer(comps, 0); #do something time.sleep(5); def manageStdin(): print "Global Stdin Begins Now" for line in fileinput.input(): try: print(eval(line)); except Exception, e: print e; --Thanks

  Read the article

• Can single-buffer blocking WSASend deliver partial data?

  - by CodeAngry

  I've pretty much always used send() with sockets and now I'm moving onto the WSA functions. With send(), I have a sendall() helper that ensured all data is delivered even if it didn't happen in one try and a partial send occurred on first call. So, instead of learning the hard way or over-complicating code when I don't have to, decided to ask you: Can a blocking WSASend() send partial data or does it send everything before it returns or fails? Or should I check the bytes sent vs. expected to send and keep at it until everything is delivered? ANSWER: Overlapped WSASend() does not send partial data but if it does, it means the connection has terminated. I've never encountered the case yet.

  Read the article

• Could not start ZK at requested port of 2181, while export HBASE_MANAGES_ZK=false

  - by utrecht

  Problem The first aim was to run HBase standalone. Navigating to ip:60010/master-status is succesfull once HBase has been started. The second aim is to run a distinct ZooKeeper quorum. ZooKeeper has been downloaded and has been started: netstat -nato | grep 2181 tcp 0 0 :::2181 :::* LISTEN off (0.00/0/0) The conf/hbase-env.sh was changed as follows: # Tell HBase whether it should manage it's own instance of Zookeeper or not. export HBASE_MANAGES_ZK=false in order to avoid HBase starts ZooKeeper once HBase has been started. However, the following error occurs once HBase has been started. Could not start ZK at requested port of 2181. ZK was started at port: 2182. Aborting as clients (e.g. shell) will not be able to find this ZK quorum. Question How to disable the startup of ZooKeeper by HBase and run ZooKeeper separately?

  Read the article

• Domino HTTP Server: Error - Unable to Bind 1.2.3.4, port 80, port in use or Bind To Host configuration specifies a duplicate IP address/host

  - by pdewaard

  We have a Domino 9.0.1 Server hosted on Ubuntu 14.04 Server, which hosts several other http based Tasks, (Nginx, Couchdb, Confluence on Tomcat). The Ubuntu Server has multiple IPs, all bind correctly to the different Tasks. The Domino SMTP task binds correctly and is working well. All http tasks (other than Domino) are proxied behind Nginx version 1.6x and all are working well, netstat shows no 0.0.0.0 bindings, no one is listening on 1.2.3.4:80 . when I try to load http on the (Domino) server console it failes with HTTP Server: Error - Unable to Bind 1.2.3.4, port 80, port in use or Bind To Host configuration specifies a duplicate IP address/host a couple of times, may be 4 or 5 times then it loads without failure! And: when it comes up, I see http is listening on 80 AND 443, but SSL Connections are not working, nor any error log! It must be a kind of bad magic :-( thanks in advance Pitt

  Read the article

• Logs show failed password for invalid user root from <IP Address> port 2924 ssh2

  - by Chris Hanson

  I'm getting a constant flow of these messages in my logs. The port is variable (seemingly between 1024 and 65535). I can simulate it myself by running sftp root@<my ip> I've commented out the sftp subsystem line in my sshd_config. These ports should be closed by provider's firewall. I don't understand: Why sftp would be selecting a random port like that. It seems to be behaving like FTP in passive mode, but I can't make any sense of why that would be. Why it can even hit my server in the first place if these ports are closed.

  Read the article

• Can't connect to website after altering IPTables

  - by user2833135

  I attempted to open up a port on my VPS, but I can't connect to my website after opening up that port. Below are the commands I issued to open the port. I didn't get an error or anything after setting this up. I just can't connect to my website after doing this. [root@vps ~]# iptables -F [root@vps ~]# iptables -A INPUT -i lo -j ACCEPT [root@vps ~]# iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT [root@vps ~]# iptables -A INPUT -p tcp --dport 25765 -j ACCEPT [root@vps ~]# iptables -P INPUT DROP [root@vps ~]# iptables -P FORWARD DROP [root@vps ~]# iptables -P OUTPUT ACCEPT [root@vps ~]# iptables -L -v Just a side note, but I am running CentOS 6 (64 bit) Thank you in advance.

  Read the article

• Specify IPSEC port range using ipsec-tools

  - by Sandman4

  Is it possible to require IPSEC on a port range ? I want to require IPSEC for all incoming connections except a few public ports like 80 and 443, but don't want to restrict outgoing connections. My SPD rules would look like: spdadd 0.0.0.0/0 0.0.0.0/0[80] tcp -P in none; spdadd 0.0.0.0/0 0.0.0.0/0[443] tcp -P in none; spdadd 0.0.0.0/0 0.0.0.0/0[0....32767] tcp -P in esp/require/transport; In setkey manpage I see IP ranges, but no mention of port ranges. (The idea is to use IPSEC as a sort of VPN to protect internal communications between multiple servers. Instead of configuring permissions basing on source IPs, or configuring specific ports, I want to demand IPSEC on anything which is not meant to be public - I feel it's less error-prone this way.)

  Read the article

• Cisco SR520w FE - WAN Port Stops Working

  - by Mike Hanley

  I have setup a Cisco SR520W and everything appears to be working. After about 1-2 days, it looks like the WAN port stops forwarding traffic to the Internet gateway IP of the device. If I unplug and then plug in the network cable connecting the WAN port of the SR520W to my Comcast Cable Modem, traffic startings flowing again. Also, if I restart the SR520W, the traffic will flow again. Any ideas? Here is the running config: Current configuration : 10559 bytes ! version 12.4 no service pad no service timestamps debug uptime service timestamps log datetime msec no service password-encryption ! hostname hostname.mydomain.com ! boot-start-marker boot-end-marker ! logging message-counter syslog no logging rate-limit enable secret 5 <removed> ! aaa new-model ! ! aaa authentication login default local aaa authorization exec default local ! ! aaa session-id common clock timezone PST -8 clock summer-time PDT recurring ! crypto pki trustpoint TP-self-signed-334750407 enrollment selfsigned subject-name cn=IOS-Self-Signed-Certificate-334750407 revocation-check none rsakeypair TP-self-signed-334750407 ! ! crypto pki certificate chain TP-self-signed-334750407 certificate self-signed 01 <removed> quit dot11 syslog ! dot11 ssid <removed> vlan 75 authentication open authentication key-management wpa guest-mode wpa-psk ascii 0 <removed> ! ip source-route ! ! ip dhcp excluded-address 172.16.0.1 172.16.0.10 ! ip dhcp pool inside import all network 172.16.0.0 255.240.0.0 default-router 172.16.0.1 dns-server 10.0.0.15 10.0.0.12 domain-name mydomain.com ! ! ip cef ip domain name mydomain.com ip name-server 68.87.76.178 ip name-server 66.240.48.9 ip port-map user-ezvpn-remote port udp 10000 ip ips notify SDEE ip ips name sdm_ips_rule ! ip ips signature-category category all retired true category ios_ips basic retired false ! ip inspect log drop-pkt no ipv6 cef ! multilink bundle-name authenticated parameter-map type inspect z1-z2-pmap audit-trail on password encryption aes ! ! username admin privilege 15 secret 5 <removed> ! crypto key pubkey-chain rsa named-key realm-cisco.pub key-string <removed> quit ! ! ! ! ! ! crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 connect auto group EZVPN_GROUP_1 key <removed> mode client peer 64.1.208.90 virtual-interface 1 username admin password <removed> xauth userid mode local ! ! archive log config logging enable logging size 600 hidekeys ! ! ! class-map type inspect match-any SDM_AH match access-group name SDM_AH class-map type inspect match-any SDM-Voice-permit match protocol sip class-map type inspect match-any SDM_ESP match access-group name SDM_ESP class-map type inspect match-any SDM_EASY_VPN_REMOTE_TRAFFIC match protocol isakmp match protocol ipsec-msft match class-map SDM_AH match class-map SDM_ESP match protocol user-ezvpn-remote class-map type inspect match-all SDM_EASY_VPN_REMOTE_PT match class-map SDM_EASY_VPN_REMOTE_TRAFFIC match access-group 101 class-map type inspect match-any Easy_VPN_Remote_VT match access-group 102 class-map type inspect match-any sdm-cls-icmp-access match protocol icmp match protocol tcp match protocol udp class-map type inspect match-any sdm-cls-insp-traffic match protocol cuseeme match protocol dns match protocol ftp match protocol h323 match protocol https match protocol icmp match protocol imap match protocol pop3 match protocol netshow match protocol shell match protocol realmedia match protocol rtsp match protocol smtp extended match protocol sql-net match protocol streamworks match protocol tftp match protocol vdolive match protocol tcp match protocol udp class-map type inspect match-any L4-inspect-class match protocol icmp class-map type inspect match-all sdm-invalid-src match access-group 100 class-map type inspect match-all dhcp_out_self match access-group name dhcp-resp-permit class-map type inspect match-all dhcp_self_out match access-group name dhcp-req-permit class-map type inspect match-all sdm-protocol-http match protocol http ! ! policy-map type inspect sdm-permit-icmpreply class type inspect dhcp_self_out pass class type inspect sdm-cls-icmp-access inspect class class-default pass policy-map type inspect sdm-permit_VT class type inspect Easy_VPN_Remote_VT pass class class-default drop policy-map type inspect sdm-inspect class type inspect SDM-Voice-permit pass class type inspect sdm-cls-insp-traffic inspect class type inspect sdm-invalid-src drop log class type inspect sdm-protocol-http inspect z1-z2-pmap class class-default pass policy-map type inspect sdm-inspect-voip-in class type inspect SDM-Voice-permit pass class class-default drop policy-map type inspect sdm-permit class type inspect SDM_EASY_VPN_REMOTE_PT pass class type inspect dhcp_out_self pass class class-default drop ! zone security ezvpn-zone zone security out-zone zone security in-zone zone-pair security sdm-zp-in-ezvpn1 source in-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-ezpn1 source out-zone destination ezvpn-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-ezvpn-out1 source ezvpn-zone destination out-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-self-out source self destination out-zone service-policy type inspect sdm-permit-icmpreply zone-pair security sdm-zp-out-in source out-zone destination in-zone service-policy type inspect sdm-inspect-voip-in zone-pair security sdm-zp-ezvpn-in1 source ezvpn-zone destination in-zone service-policy type inspect sdm-permit_VT zone-pair security sdm-zp-out-self source out-zone destination self service-policy type inspect sdm-permit zone-pair security sdm-zp-in-out source in-zone destination out-zone service-policy type inspect sdm-inspect ! bridge irb ! ! interface FastEthernet0 switchport access vlan 75 ! interface FastEthernet1 switchport access vlan 75 ! interface FastEthernet2 switchport access vlan 75 ! interface FastEthernet3 switchport access vlan 75 ! interface FastEthernet4 description $FW_OUTSIDE$ ip address 75.149.48.76 255.255.255.240 ip nat outside ip ips sdm_ips_rule out ip virtual-reassembly zone-member security out-zone duplex auto speed auto crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 ! interface Virtual-Template1 type tunnel no ip address ip virtual-reassembly zone-member security ezvpn-zone tunnel mode ipsec ipv4 ! interface Dot11Radio0 no ip address ! encryption vlan 75 mode ciphers aes-ccm ! ssid <removed> ! speed basic-1.0 basic-2.0 basic-5.5 6.0 9.0 basic-11.0 12.0 18.0 24.0 36.0 48.0 54.0 station-role root ! interface Dot11Radio0.75 encapsulation dot1Q 75 native ip virtual-reassembly bridge-group 75 bridge-group 75 subscriber-loop-control bridge-group 75 spanning-disabled bridge-group 75 block-unknown-source no bridge-group 75 source-learning no bridge-group 75 unicast-flooding ! interface Vlan1 no ip address ip virtual-reassembly bridge-group 1 ! interface Vlan75 no ip address ip virtual-reassembly bridge-group 75 bridge-group 75 spanning-disabled ! interface BVI1 no ip address ip nat inside ip virtual-reassembly ! interface BVI75 description $FW_INSIDE$ ip address 172.16.0.1 255.240.0.0 ip nat inside ip ips sdm_ips_rule in ip virtual-reassembly zone-member security in-zone crypto ipsec client ezvpn EZVPN_REMOTE_CONNECTION_1 inside ! ip forward-protocol nd ip route 0.0.0.0 0.0.0.0 75.149.48.78 2 ! ip http server ip http authentication local ip http secure-server ip http timeout-policy idle 60 life 86400 requests 10000 ip nat inside source list 1 interface FastEthernet4 overload ! ip access-list extended SDM_AH remark SDM_ACL Category=1 permit ahp any any ip access-list extended SDM_ESP remark SDM_ACL Category=1 permit esp any any ip access-list extended dhcp-req-permit remark SDM_ACL Category=1 permit udp any eq bootpc any eq bootps ip access-list extended dhcp-resp-permit remark SDM_ACL Category=1 permit udp any eq bootps any eq bootpc ! access-list 1 remark SDM_ACL Category=2 access-list 1 permit 172.16.0.0 0.15.255.255 access-list 100 remark SDM_ACL Category=128 access-list 100 permit ip host 255.255.255.255 any access-list 100 permit ip 127.0.0.0 0.255.255.255 any access-list 100 permit ip 75.149.48.64 0.0.0.15 any access-list 101 remark SDM_ACL Category=128 access-list 101 permit ip host 64.1.208.90 any access-list 102 remark SDM_ACL Category=1 access-list 102 permit ip any any ! ! ! ! snmp-server community <removed> RO ! control-plane ! bridge 1 protocol ieee bridge 1 route ip bridge 75 route ip banner login ^CSR520 Base Config - MFG 1.0 ^C ! line con 0 no modem enable line aux 0 line vty 0 4 transport input telnet ssh ! scheduler max-task-time 5000 end I also ran some diagnostics when the WAN port stopped working: 1. show interface fa4 FastEthernet4 is up, line protocol is up Hardware is PQUICC_FEC, address is 0026.99c5.b434 (bia 0026.99c5.b434) Description: $FW_OUTSIDE$ Internet address is 75.149.48.76/28 MTU 1500 bytes, BW 100000 Kbit/sec, DLY 100 usec, reliability 255/255, txload 1/255, rxload 1/255 Encapsulation ARPA, loopback not set Keepalive set (10 sec) Full-duplex, 100Mb/s, 100BaseTX/FX ARP type: ARPA, ARP Timeout 04:00:00 Last input 01:08:15, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/23/0 (size/max/drops/flushes); Total output drops: 0 Queueing strategy: fifo Output queue: 0/40 (size/max) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 1000 bits/sec, 0 packets/sec 336446 packets input, 455403158 bytes Received 23 broadcasts, 0 runts, 0 giants, 37 throttles 41 input errors, 0 CRC, 0 frame, 0 overrun, 41 ignored 0 watchdog 0 input packets with dribble condition detected 172529 packets output, 23580132 bytes, 0 underruns 0 output errors, 0 collisions, 2 interface resets 0 unknown protocol drops 0 babbles, 0 late collision, 0 deferred 0 lost carrier, 0 no carrier 0 output buffer failures, 0 output buffers swapped out 2. show ip route Gateway of last resort is 75.149.48.78 to network 0.0.0.0 C 192.168.75.0/24 is directly connected, BVI75 64.0.0.0/32 is subnetted, 1 subnets S 64.1.208.90 [1/0] via 75.149.48.78 S 192.168.10.0/24 is directly connected, BVI75 75.0.0.0/28 is subnetted, 1 subnets C 75.149.48.64 is directly connected, FastEthernet4 S* 0.0.0.0/0 [2/0] via 75.149.48.78 3. show ip arp Protocol Address Age (min) Hardware Addr Type Interface Internet 75.149.48.65 69 001e.2a39.7b08 ARPA FastEthernet4 Internet 75.149.48.76 - 0026.99c5.b434 ARPA FastEthernet4 Internet 75.149.48.78 93 0022.2d6c.ae36 ARPA FastEthernet4 Internet 192.168.75.1 - 0027.0d58.f5f0 ARPA BVI75 Internet 192.168.75.12 50 7c6d.62c7.8c0a ARPA BVI75 Internet 192.168.75.13 0 001b.6301.1227 ARPA BVI75 4. sh ip cef Prefix Next Hop Interface 0.0.0.0/0 75.149.48.78 FastEthernet4 0.0.0.0/8 drop 0.0.0.0/32 receive 64.1.208.90/32 75.149.48.78 FastEthernet4 75.149.48.64/28 attached FastEthernet4 75.149.48.64/32 receive FastEthernet4 75.149.48.65/32 attached FastEthernet4 75.149.48.76/32 receive FastEthernet4 75.149.48.78/32 attached FastEthernet4 75.149.48.79/32 receive FastEthernet4 127.0.0.0/8 drop 192.168.10.0/24 attached BVI75 192.168.75.0/24 attached BVI75 192.168.75.0/32 receive BVI75 192.168.75.1/32 receive BVI75 192.168.75.12/32 attached BVI75 192.168.75.13/32 attached BVI75 192.168.75.255/32 receive BVI75 224.0.0.0/4 drop 224.0.0.0/24 receive 240.0.0.0/4 drop 255.255.255.255/32 receive Thanks in advance, -Mike

  Read the article

• Can't create VM with virt-install on Debian wheezy

  - by chrismacp

  Cant find any answers anywhere so here goes. I am trying to CREATE a new virtual machine using the virt-install command from a console on a Debian wheezy install. I keep getting the following output: Starting install... ERROR internal error process exited while connecting to monitor: char device redirected to /dev/pts/1 inet_listen_opts: bind(ipv4,127.0.0.1,5951): Cannot assign requested address inet_listen_opts: FAILED I assumed that the port (5951 in this case) was being used judging by the error message and other sites I visited for an answer, but the same error occurs whatever number I use for the port. I cant see that port being listened upon in netstat either. Anyone have any ideas what may be wrong?

  Read the article

• Port scientific software to GPU and publish it

  - by Werner

  Hi, let's say that I am a physicist and that I am the master of the universe when it comes to port salready existing oftware to GPU's with 100x or more speedups. Let's say that I find that some other scientist, which does not know how to program GPU, publishes the Open Source code in his/her website of a physical simulation program, in the field I am expert on. Let's say that I realize "I can port that code to GPU", and I suggest him, but he shows no interest. My interest here is, 1) to port it to GPU, 2) to publish this result in a scientific journal related with physics and/or computer science My question for you is 1- would you proceed here to port the code to GPU (or other new arch) and publish it? 2- how would you do it and which journal do you suggest? Thanks

  Read the article

• possible SYN flooding on port 80. Sending cookies

  - by Sparsh Gupta

  I recently had a server downtime. I looked everywhere and the only thing I found in my log files is: Feb 17 18:58:04 localhost kernel: possible SYN flooding on port 80. Sending cookies. Feb 17 18:59:33 localhost kernel: possible SYN flooding on port 80. Sending cookies. Can someone give me more information about it. WHat is it, How can I debug the cause and how can I fix the same. I also posted ipconntrack suddenly became toooo large which has another data point I found unusual, wondering if the two things is connected as they occured exactly at the same time but at different servers. One at reverse proxy and other at actual backend Varnish server) Thanks

  Read the article

• Proxy via Telnet

  - by Vreality2007

  I know telnet is insecure and all, but I'm stuck using it because ssh is blocked. I know how to setup ssh to bind the connection to a local port, is there a way to do this with telnet? For example, if I am using an ssh connection, I would bind it to port 999 like this: ssh -D 999 [email protected] -N -C I've tried using the -b command in linux, but to no avail. Is this even possible? This is what I've tried: telnet host.com -b 999 I'm sorry if the answer is obvious, but I've done a lot of research and testing and I can't seem to figure this out. NOTE: I plan on telling the admin if I can find a way to get this to work, this is based off of simple curiosity and not malicious intent. If I can't bind a telnet port, is there a way to tunnel an ssh connection through telnet?

  Read the article

• IIS - Forwarding requests to a folder to another port

  - by user1231958

  Context I currently installed Glassfish 3 in a server that currently holds ASP and PHP inside Internet Information Server 7 so we can start moving to a new system architecture (the information system is being remade). Obviously, Glassfish uses another port and without too much configuration (all I had to do is to install it) it worked. If I write www.domain.com:8080, the person will be redirected to the Glassfish server. Issue Obviously I don't want the person to write the port! I also believe it might also hold some security issues. Requirement I need the server to take an address of the form www.domain.com/gf or new.domain.com or something alike, and when it receives such a request, "redirect" (masking the URL) the user to the Glassfish website (www.domain.com:8080). Thank you beforehand!

  Read the article

• HTTP through a proxy server is not allowed

  - by jidma

  When I try to connect to my Tomcat server on http://<servername>:8080 it works fine, but from another ISP provided it gives the following error: HTTP through a proxy server is not allowed. Some ISP apparently don't allow http over the port 8080, as they think the client uses a proxy. I also have a httpd running on port 80 for my website. So in order to avoid the proxy error, I would like to make to following routing: If the user connects to http://<servername>, then the website is served via apache. If the user connects to http://<servername>/AppName, then the port is rerouted to 8080, without the client (or his ISP) knowing. Is that possible (using iptables or something else) ? Thank you

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >