Search Results

Search found 17856 results on 715 pages for 'setup py'.

Page 42/715 | < Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >

• iRedMail home setup - use different SMTP relay for different destination domains

  - by John

  Hello helpful server folks, I'm messing with iRedMail. I've mostly been successful, I think I have an SMTP problem. I have changed RoundCube (webmail) to use BrightHouse's, my ISP's, SMTP server for outgoing. It works fine, I click send and poof, I have gmail. I can reply from gmail to my email server, and it works. It took 10 hours for the email to show up, which is a different problem, I think, but it does work. But when I send from my server TO my own server, my ISP's Postmaster account sends me a cryptic blurb. I just got off the phone with them, and they say it "should work", and that they can't reach my pop3 server. (pop3, pop3s, imap, and imaps are all open on my router and forwarded to the server, I'm not sure what I need, I'm just covering my bases...) pop3 and/or imap as external interfaces are just formalities, I really just want webmail to work. Roundcube only takes one SMTP server in its configs. How can I configure Postfix to relay / forward emails to my ISP's SMTP, while taking messages bound for my own domain and processing them? Since my ISP won't let me "bounce" my emails off of it. Maybe I'm vastly misunderstanding how e-mail works in general: To receive mail, I should only need port 25, SMTP, open to the internet, correct? Should I be concerned about some authentication failure from the outside to my relay? (My relay requires user/pass to use, my ISP's requires none.)

  Read the article

• How to setup Windows Server 2008 R2 Server Core

  - by Robert Koritnik

  I'm an MSDN subscriber. I would like to install Windows Server 2008 R2 Server Core, but when I insert MSDN #4629 DVD there're only full versions of Windows Server 2008 R2. How am I supposed to install Server Core then? Any suggestions? Is it possible to covert it back to server core when a GUI version's already installed?

  Read the article

• Setup voip with PennyTel on Nexus One [closed]

  - by Glen

  Hi, I am trying to get VOIP working with PennyTel on my Nexus One. I have created a penny tel voip account and put $10 in. I have tried two options: Sipdroid: I installed this app and followed this guide: http://seethisnowreadthis.com/2009/07/11/get-sipdroid-to-work-with-any-sip-provider-on-your-android-phone/ But I had no luck. i just get an error that it could not authenticate PennyTel test version app by seer I entered my pennytel details in and tried to make a call but it just hangs up immediately. Thanks, Glen.

  Read the article

• Reverse proxy setup for distributed storage

  - by vise

  I have 4 file servers that I want to access under a single mount point from another server. This server has a web application that should serve content from the mounted point. I think I can achieve this with glusterfs. Considering that the file servers have fairly powerful hardware, I want to install a webserver on each of them and serve those files via a reverse proxy. Any thoughts on how I may be able to do so?

  Read the article

• How to setup complete email send/receive on debian [closed]

  - by xZero

  I have VPS server with Debain 6 Squeze installed on it. Also i have complete LAMP, and im able to send emails throught PHP. Now i have my domain, so i wanna configure my VPS to have some inbox software like roundcube to access it throught WEB interface, and ability to send and receive emails. I wanna ability to create new email accounts on my domain, and it shall be useable on my VPS. How to do that? Thanks in advance.

  Read the article

• New router messed up server 2003 setup...

  - by Aceth

  Hey, We were sent a new 2wire router today configured it as best we can to match the old bt voyager. We've also got X static IP's. We've manage to get our webserver on one of the new IP's public facing. then we use a hardware firewall which is in a DMZ again with a different static IP. This firewall then is our gateway for our internal LAN. with a few servers etc. The problem we're having is only our PDC (primary Domain controller which has exchange 2003 on) can't ping externally even an external IP. We've connected laptops to the 2wire router and obtain a private ip 192.168.1.X and it works fine can ping etc. our other servers with an internal ip behind the firewall can ping out fine. We've connected to the firewalls logging console and the pings from the server are allowed through so its fine there. The server in question is a Windows server 2003 R2 Enterprise SP2 + Exchange 2003 Server doesn't have firewall turned on. it has static private IP .. gateway is pointing to the right one External Static IP is routing fine inwards We've ran out of ideas .. help??

  Read the article

• How to document mail setup after hand-over.

  - by BradyKelly

  I've just moved a client's email services over from my host to Google Apps. I would like to hand over a document providing all they (or their agent) need should I not be available etc. How are such documents normally structured, and what level of detail should they contain? I know user names and passwords are essential, and instructions on how to manage domains on Google Apps are over the top, but what is a commonly used middle ground?

  Read the article

• Can't find IIS manager on SQL Reporting Services 2008 machine to setup FQDN

  - by NoCarrier

  I've got a machine that I inherited that runs SSRS 2008. I can't seem to find IIS anywhere on this machine, yet it's serving up content over port 80. I look under services and there is no WWW service running. I need to configure a fully qualified domain name for this reporting instance and I am at a loss as to where to start. Does SSRS 2008 run under its own web server?

  Read the article

• Arch Linux with an nginx/django setup refuses to display ANYTHING

  - by Holland

  I'm on Amazon Ec2, with an Arch Linux server. While I truly am loving it, I'm having the issue of actually getting nginx to display anything. Everytime I try to throw my hostname into the browser, the browser states that it's not available for some reason - almost as if the host doesn't even exist. One thing I'd like to know is, how can I get this up and running? Is there a specific arch linux configuration I have to do to make it web accessible? I have port 80 open, as well as port 22. I've tried using gunicorn, python-flup, and nginx. Nginx Config user http; worker_processes 1; #error_log logs/error.log; #error_log logs/error.log notice; #error_log logs/error.log info; pid logs/nginx.pid; events { worker_connections 1024; } http { include mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log logs/access.log main; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; #gzip on; server { listen 80; server_name _; access_log /var/log/nginx/access.log; error_log /var/log/nginx/error.log; #charset koi8-r; location ^~ /media/ { root /path/to/media; } location ^~ /admin-media/ { root /usr/lib/python2.7/site-packages/django/contrib/admin/media; } location / { root /path/to/root/; fastcgi_pass 127.0.0.1:8080; fastcgi_param SERVER_NAME $server_name; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param PATH_INFO $fastcgi_script_name; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param QUERY_STRING $query_string; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_pass_header Authorization; fastcgi_intercept_errors off; fastcgi_index index.html; index index.htm index.html; } error_page 500 502 503 504 /50x.html; location = /50x.html { root /etc/nginx/html/50x.html; } } # server { # listen 80; # server_name localhost; #charset koi8-r; #access_log logs/host.access.log main; # location / { # root html; # index index.html index.htm; # } #error_page 404 /404.html; # redirect server error pages to the static page /50x.html # #error_page 500 502 503 504 /50x.html; #location = /50x.html { root html; #} # proxy the PHP scripts to Apache listening on 127.0.0.1:80 # #location ~ \.php$ { # proxy_pass http://127.0.0.1; #} # pass the PHP scripts to FastCGI server listening on 127.0.0.1:9000 # #location ~ \.php$ { # root html; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME /scripts$fastcgi_script_name; # include fastcgi_params; #} # deny access to .htaccess files, if Apache's document root # concurs with nginx's one # #location ~ /\.ht { # deny all; #} #} # another virtual host using mix of IP-, name-, and port-based configuration # #server { # listen 8000; # listen somename:8080; # server_name somename alias another.alias; # location / { # root html; # index index.html index.htm; # } #} # HTTPS server # #server { # listen 443; # server_name localhost; # ssl on; # ssl_certificate cert.pem; # ssl_certificate_key cert.key; # ssl_session_timeout 5m; # ssl_protocols SSLv2 SSLv3 TLSv1; # ssl_ciphers HIGH:!aNULL:!MD5; # ssl_prefer_server_ciphers on; # location / { # root html; # index index.html index.htm; # } #} } I can't quite tell if it's a server issue or a configuration issue: I've followed so many guides now I can't even count them all. The thing is that Django itself is working fine, and my permissions to the document root of the where the site files are stored is 777. Ontop of that, I have a git repo which works perfectly fine, and django, python, and runfcgi all start without issues. The same goes for gunicorn, when I do a gunicorn_django -b 0.0.0.0:8000 in my document root. Here is my output from that: 2012-04-15 05:17:37 [3124] [INFO] Starting gunicorn 0.14.2 2012-04-15 05:17:37 [3124] [INFO] Listening at: http://0.0.0.0:8081 (3124) 2012-04-15 05:17:37 [3124] [INFO] Using worker: sync 2012-04-15 05:17:37 [3127] [INFO] Booting worker with pid: 3127 As far as I know, everything seems fine, as well as error.log and access.log for nginx. The access log is completely blank, for that matter. I just feel lost here; what would be a step in the right direction to bebugging an issue such as this?

  Read the article

• DYNDNS setup with TightVNC on Windows Server 2008 R2

  - by StealthRT

  Hey all, i seem to be having a problem with getting ports to forward on my Windows Server 2008 R2 PC. I already set all my port forwarding for 5900/5800 on my router for my PC's IP address (192.168.1.22) but when i try to use the TightVNC PFPortChecker on port 5900 it tells me its not opened! I can not even connect to my DYNDNS server name (xxxxxxx.dyndns.org). As a side note, i am running Windows XP SP3 within a VirtaulBox inside Windows Server 2008 R2 but running the PFPortChecker in Windows 2008 R2 brings the same results as it does in the VM. I also added them to the Windows Firewall Advanced Security form to add those inbound ports for full access. What could i possibly be missing? Thanks for your time! David

  Read the article

• Net Screen manager setup

  - by Codezy

  I'm having an issue with our NSMExpress box. I'm trying to manage all our devices, range from ns5gt to ssg320m, and some of those devices have addresses assigned by dhcp from the ISP (like pppoe or dsl). The addresses are actually static but we have the register the MAC address in order to get this address. I can actually add the device in NSM except the IP that's on the untrust side isn't imported in as it's dynamic. Because of this I cannot change many options that pertian to the untrust interface as there is no IP. I've talked to JTAC on this and they didn't know if there was a way to do this or not but then they stated that Tim Hortons does this so I'm confused on how to get this working. Maybe i'm just missing something as I imagine that other people must be doing this as well. Any assistance is appreciated! Furthermore when I import a device this is the message I get: Warnings: Interface ethernet0/0 is a pppoe/dhcp/pppoa client and its ip is NOT IMPORTED because it may be dynamic.

  Read the article

• How to setup Secure SemiPublic Revision Control System

  - by user24912

  I have a windows server with a project configured with a revision control system. Suppose it's GIT or SVN or .... Suppose there are 10 people around the globe working on this project. The first thing that comes in to mind is to secure the connection between these programmer and the server with SSH. but my problem is that the a hacker can destroy the server if he gets the SSH username and password user account (tell me if i'm wrong). So I need a secure way to let thoes programmers push their revision to the server. Any ideas would be lovely

  Read the article

• Setup a DNS wilcard and MX record in the same zone

  - by Nicolas BADIA

  I'd like to know how to configure my DNS to be able to use a wildcard for my domain and an MX record together. Here is what I've done: @ IN SOA dns100.ovh.net. tech.ovh.net. (2012052100 86400 3600 3600000 300) IN NS ns100.ovh.net. IN NS dns100.ovh.net. IN MX 1 mail.gestixi.com. IN A 91.121.39.211 * IN CNAME gestixi.com. www IN CNAME gestixi.com. The problem is that when I check my DNS, I get this error: MX records shall not point to an alias defined by a CNAME Because of this error, it look like I can't send mails from some internet providers.

  Read the article

• SSL setup: UCC or wildcard certificates?

  - by quanza

  I've scoured the web for a clear and concise answer to my SSL question, but to no avail. So here goes: I have a web-service requiring SSL support for authentication pages. The root-level domain does not have the "www" - i.e., secure://domain.com - but localized pages use "language-code.domain.com", i.e. secure://ja.domain.com So I need at least a wildcard SSL certificate that supports secure://*.domain.com However, we also have a public sandbox environment at sandbox.domain.com, which we also need to support under localized domains - so secure://ja.sandbox.domain.com needs to also work. The previous admin managed to purchase a wildcard SSL certificate for .domain.com, but with a Subject Alternative Name for "domain.com". So, I'm thinking of trying to get a wildcard certificate with SANs defined as "domain.com" and ".*.domain.com". But now I'm getting confused because there seem to be separate SAN certificates, also called UCC certificates. Can someone clarify whether it's possible to get a wildcard certificate with additional SAN fields, and ultimately what the best way is to support: secure://domain.com secure://.domain.com secure://.*.domain.com with the fewest (and cheapest!) number of SSL certificates? Thanks!

  Read the article

• Networking switch setup

  - by Crash893

  I have two 48 port gigabit netgear switches with 2 SFP ports each (i also have two Mini-GBIC copper transceiver modules) Is it best to set the ports up by using the built in ports (ie plug port 1 of switchB into port 48 of switchA and port1 of switchA into the router) or is there an advantage to using the mini-gbic? (lets call the sfp ports 49 and 50) router - port 49 on switchA, port 50 switchA - port 49 SwitchB

  Read the article

• Recommendation for email setup for programatically sending lots of emails

  - by jcmoney

  To clarify I have an app that notifies users via email when certain actions take place (I am not spamming as the user has opted in to the notifications and can change that option at any time). Because of number of emails that needs to be sent, Gmail, Yahoo, etc will not work. Unless I am mistaken services like MailChimp, Lyris, etc will also not fit this need since every email is sent one at a time and is very specific to the user and action that took place. What I really want is something that would allow me to be able to call some mail function, give it a recipient, from, message and subject, and not have it be blocked by the email service. This can be a free or paid service. I have server access so I can install something if necessary as well but I don't know much about email services and fear if I do it myself, I'll get blocked by some other player like my VPS host or ISP or something.

  Read the article

• Django, wsgi, py. what's the difference?

  - by Kenny

  I'm trying to get a django application up and running on my cpanel system. I've installed mod_wsgi, and am following the guide here: http://www.nerdydork.com/setting-up-django-on-a-whm-cpanel-vps-liquidweb.html However, I'm now confused as I don't know what to do next. The application has .py files, and I am able to run it via this: python manage.py runserver 211.144.131.148:8000 However, that's via command line and binds to port 8000. I want to use Apache instead. The question is, that tutorial doesn't go further into how to get apache to recognize .py files and run the application as I want it. What do I do next?

  Read the article

• Basic OpenVPN setup

  - by WalterJ89

  I am attempting to connect 2 win7 (x64+ x32) computers (there will be 4 in total) using OpenVPN. Right now they are on the same network but the intention is to be able to access the client remotely regardless of its location. The Problem I am having is I am unable to ping or tracert between the two computers. They seem to be on different subnets even though I have the mask set to 255.255.255.0. The server ends up as 10.8.0.1 255.255.255.252 and the client 10.8.0.6 255.255.255.252. And a third ends up as 10.8.0.10. I don't know if this a Windows 7 problem or something I have wrong in my config. Its a very simple set up, I'm not connecting two LANs. this is the server config (removed all the extra lines because it was too ugly) port 1194 proto udp dev tun ca keys/ca.crt cert keys/server.crt key keys/server.key # This file should be kept secret dh keys/dh1024.pem server 10.8.0.0 255.255.255.0 ifconfig-pool-persist ipp.txt client-to-client duplicate-cn keepalive 10 120 comp-lzo persist-key persist-tun status openvpn-status.log verb 6 this is the client config client dev tun proto udp remote thisdomainis.random.com 1194 resolv-retry infinite nobind persist-key persist-tun ca keys/ca.crt cert keys/client.crt key keys/client.key ns-cert-type server comp-lzo verb 6 Is there anything I missed in this? keys are all correct and the vpn's connect fine, its just the subnet or route issue. Thank You

  Read the article

• IPv6 tunnel broker setup

  - by fred basset

  I'm working on a solution to allow remote Linux nodes that are behind firewalls to be accessible for SSH and web server. Can anyone suggest an IPv6 tunnel scheme that would work with NAT firewalls? And what software would be needed on the remote nodes and the central server? Also I do not believe the ISP at either side does native IPv6. A solution where we could have static IPv6 addresses on the remote Linux nodes would be ideal. Thank you, Fred

  Read the article

• VoIP - need setup ip network with our SIP operator

  - by evgeniy.labusnkiy

  Need to make next one: for ex i'm now in UAE, but i need to make a call to my girlfriend who is in Ukraine. I need to find the way how can i make the connection to my home router and make the call from VoIP gateway using my standard phone network in Ukraine. I have some imagination about this, to do like this: Connect to router or VoIP gateway (how? soft?) using inet - Gateway make a call using standard phone line in my country. Any ideas? Best practice? What devices i need to make this? Pay attention that i don't want to use any SIP providers. Thats a lot!

  Read the article

• Multi-level wildcard (catch-all) DNS setup *.*.domain.com => one IP/CNAME

  - by Jan Rovner

  It is well known that it is possible to configure a DNS server to do a "catch-all" resolving on a single subdomain level, such as *.example.com. IN A x.x.x.x, so that anything.example.com maps to a single IP/CNAME. However, I need to set up an at least "level-2" wildcard sub-subdomain catch-all wildcard system so that any.thing.example.com or better, item.of.any.level.under.example.com will be resolved to a single IP. Has anyone got this working?

  Read the article

• Issues while installing no machine setup (NX )

  - by TopCoder

  I am trying to connect to NX server from windows client but it reports following exception NX 203 NXSSH running with pid: 5404 NX 285 Enabling check on switch command NX 285 Enabling skip of SSH config files NX 285 Setting the preferred NX options NX 200 Connected to address: 10.43.51.77 on port: 22 NX 202 Authenticating user: nx NX 208 Using auth method: publickey NX 204 Authentication failed. I have regenearted the default_dsa.key on server and imported the same for client but still not working. Any solutions?

  Read the article

• squidGuard hangs during setup

  - by richard

  I have a squid proxy on my Debian-Gnu-Linux-laptop configured to block some web sites. I can set a browser to use this proxy, but I can also configure it to not use it. As I an using it to block some sites. I do not wish and application to be able to bypass the proxy. Is it possible to to configure a fire wall to black outgoing traffic except if sent by the proxy application or user? I would like a simple configurator if possible.

  Read the article

• How to setup Mac server to use two gateways

  - by Brady

  I recently asked this question: How to set Mac server to use different Gateway for internet bound traffic The answer given works but has presented me with another issue that I didnt make clear in that question. Here is my network layout as it stands: At the moment outside staff members use some services on the existing internet 1 link. Those services are hosted by the Mac server. If I change the gateway of the Mac server to the second modem those outside staff lose visabilty on those services. Now I dont know how to go about solving this issue. I want the second link to be used when the Mac server goes to rsync data offsite but everything else use link one. How do I do this? Thanks Scott EDIT: This has been resolved by setting the default gateway on the Mac server to 192.168.1.254 Thus leaving everything on the network as it was before. but to get the Mac server to use the other link for rsync I've added a route to the Mac server to route traffic to the rsync server through the second gateway. sudo route add -net {server IP's}/{Netmask} 192.168.1.1 I've awarded the answer to gravyface for pointing me to a post on how to make this route persistant in Mac

  Read the article

• drive not showing in Windows setup

  - by Binu V

  Hi, I accidentally formatted my OEM drive of M DELL Inspiron. After that I could not install Windows 7 on my laptop. Because the partitions of my hard disk are not showing to select an install drive. I downloaded the RAID driver from the Dell Support website for my laptop, but the driver is showing and I loaded the driver from a pen drive. But it's still not showing the drives.

  Read the article

< Previous Page | 38 39 40 41 42 43 44 45 46 47 48 49  | Next Page >