Search Results

Search found 14624 results on 585 pages for 'static'.

Page 420/585 | < Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >

• Using a Level 2 switch as a core switch

  - by imtech

  I have a small user base of about 20 people on at a time and spiking up to about 80 people during peak times. Most people (80+%) are connected over our Aruba managed wireless system. We have a Windows Domain. We have 3 24-Port switches all connecting back to a central 48-port switch where additional access ports, firewall, servers, and wireless controller all centrally connect back to. It's a flat network with dumb switches. I'm in the process of upgrading our infrastructure. Cisco pricing for switches is pretty high for us so I've been looking at HP Procurves which seem to be within our budget range. I want to eventually make use of 802.1x, SNMP, QoS for possible VOIP upgrades, VLAN to separate guest VLAN from authenticated users, and other more advanced features. PoE would be nice but that's probably too expensive for us. I was thinking of having our core switch be a Procurve 2610 and the rest of our switches that centrally connect to it be Procurve 2510s. A true and full blown level 3 switch is way out of our price range but a 2610 seems to be good enough for us. The 2610 does static routing which ought to be good enough for us but I'm in unfamiliar territory so I'm looking for any gotchas. Also, should all the switches be 2610s or just the core switch? Do I even need the 2610, can I just go with all 2510s? I'm new to VLANs as well so I'm not sure what it is I need but I would like an affordable infrastructure that won't need replacing 2-3 years down the line because I choose a product that was lacking.

  Read the article

• virtual memory commited

  - by vinu

  After a server bounce happens, and after around 40-45 days time period, we receive continuous “Committed Virtual Memory” alerts which indicates the usage of swap space in the magnitude of 4GB This also causes the application to perform very slowly and experience a number of stalled transactions. Server Setup: 4 Tomcat Servers (version 7.0.22) that are load balanced (not clustered) by 2 Apache Servers. And the Apache servers themselves supply static content and routing to these 4 tomcat servers. Java Runtime Version: java version "1.6.0_30" Java(TM) SE Runtime Environment (build 1.6.0_30-b12) Java HotSpot(TM) 64-Bit Server VM (build 20.5-b03, mixed mode Memory Startup Parameters: MEMORY_OPTIONS="-Xms1024m -Xmx1024m -Xss192k -XX:MaxGCPauseMillis=500 -XX:+HeapDumpOnOutOfMemoryError -XX:MaxPermSize=256m -XX:+CMSClassUnloadingEnabled" Monitoring – Wily monitoring is available in all the production servers that monitors key server parameters and sends out configurable alert emails based on pre defined settings. Note: Each of the servers also has two other separate tomcat domains that run different applications Investigated area: There is no Heap Memory Leak and the GC is running fine without any issues over any period of time The current busy thread count corresponds directly to the application usage – weekends and nights have lesser no. of threads compared to business hours ThreadLocal uses a WeakReference internally. If the ThreadLocal is not strongly referenced, it will be garbage-collected, even though various threads have values stored via that ThreadLocal. Additionally, ThreadLocal values are actually stored in the Thread; if a thread dies, all of the values associated with that thread through a ThreadLocal are collected. If you have a ThreadLocal as a final class member, that's a strong reference, and it cannot be collected until the class is unloaded. But this is how any class member works, and isn't considered a memory leak. The cited problem only comes into play when the value stored in a ThreadLocal strongly references that ThreadLocal—sort of a circular reference. In this case, the value (a SimpleDateFormat), has no backwards reference to the ThreadLocal. There's no memory leak in this code. Can anyone please let me know what could be the cause of this and what to be monitored?

  Read the article

• Networking 2 Virtual PC with one VPC as DHCP server

  - by vivek

  My host OS is Win XP Professional. The host has a real network connection via DSL and I created a second network connection using Microsoft Loopback Adapter. Internet connection sharing is enabled. The Microsoft Loopback adapter has a IP address of 192.168.0.1. I have 1 Virtual PC which has Windows Server 2003. I have setup the network connection on this VPC to use Microsoft Loopback Adapter. I setup this VPC to be the Domain Controller , DNS Server and DHCP Server. I set this to a static IP address 192.168.0.2 (on the same subnet as the MS Loopback adapter) I have a second Virtual PC which also has Windows Server 2003. The network connection on this VPC is set to "Local Only". I want this VPC to get its IP address from the 1st VPC on which I setup as a DHCP server. What i want is the 2 VPC should be in a network with one of the VPC acting as the domain controller, DNS Server and DHCP server. The second VPC shoud get its IP address from the 1st VPC. It should be a part of the domain of the 1st VPC. When i tried to make the second VPC get the IP address from the first VPC I am not succeeding. Can somebody post some suggestions on how to go about this ?

  Read the article

• All virtualhosts serving Apache default files

  - by tj111

  I'm trying to configure Apache as an in-network webserver, and am using the sites-available/sites-enabled feature as opposed to just static vhost files. I set up a couple VirtualHosts, all with a unique DocumentRoot, however request for all the VirtualHosts just serve up the "It's Working!" default file. I can't for the life of me figure out why it won't serve the content out of the correct directory. Here's the contents of the virtualhost directive files, let me know if I need to post more. default (note that apache renames this to 000-default in sites-enabled, so it's not an ordering issue) NameVirtualHost *:80 ServerName emp <VirtualHost *:80> ServerAdmin webmaster@localhost ServerName emp DocumentRoot /var/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /var/www/> Options Indexes FollowSymLinks MultiViews AllowOverride None Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> ErrorLog /var/log/apache2/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> billmed <VirtualHost *:80> ServerName billmed.emp ServerRoot /home/empression/Projects/billmed/web/httpdocs <Directory "/home/empression/Projects/billmed/web/httpdocs"> Order Allow,Deny Allow from All </Directory> </VirtualHost> Note that I have DNS zones for both emp and billmed.emp, as well as entries in /etc/hosts. My ultimate goal is to set up this machine as an in-house webserver with a custom tld (emp), but progress has been pretty slow.

  Read the article

• iptables advanced routing

  - by Shamanu4

  I have a Centos server acting as a NAT in my network. This server has one external (later ext1) interface and three internal (later int1, int2 and int3). Egress traffic comes from users via int1 and after MASQUERADE goes via ext1. Ingress traffic comes from ext1, MASQUERADE, and goes via int2 or int3 according to static routes. | ext1 | x.x.x.x/24 +---------|----------------------+ | | | Centos server (NAT) | | | +---|------|---------------|-----+ | | | int1 | | int2 | int3 10.30.1.10/24 | | 10.30.2.10/24 | 10.30.3.10/24 ^ v v 10.30.1.1/24 | | 10.30.2.1/24 | 10.30.3.1/24 +---|------|---------------|-----+ | | | | | | | v v | | ^ -Traffic policer- | | |_____________ | | | | | +------------------|-------------+ | 192.168.0.1/16 | | Clients 192.168.0.0/16 The problem: Egress traffic seems to be dropped after PREROUTING table. Packet counters are not changing on MASQUERADE rule in POSTROUTING. If I change the routes to clients causing the traffic go back via int1 - everything works perfectly. current iptable configuration is very simple: # cat /etc/sysconfig/iptables *filter :INPUT ACCEPT [0:0] :FORWARD ACCEPT [0:0] :OUTPUT ACCEPT [0:0] -I INPUT 1 -i int1 -j ACCEPT -A FORWARD -j ACCEPT COMMIT *nat -A POSTROUTING -o ext1 -j MASQUERADE # COMMIT Can anyone point me what I'm missing? Thanks. UPDATE: 192.168.100.60 via 10.30.2.1 dev int2 proto zebra # routes to clients ... 192.168.100.61 via 10.30.3.1 dev int3 proto zebra # ... I have a lot of them x.x.x.0/24 dev ext1 proto kernel scope link src x.x.x.x 10.30.1.0/24 dev int1 proto kernel scope link src 10.30.1.10 10.30.2.0/24 dev int2 proto kernel scope link src 10.30.2.10 10.30.3.0/24 dev int3 proto kernel scope link src 10.30.3.10 169.254.0.0/16 dev ext1 scope link metric 1003 169.254.0.0/16 dev int1 scope link metric 1004 169.254.0.0/16 dev int2 scope link metric 1005 169.254.0.0/16 dev int3 scope link metric 1006 blackhole 192.168.0.0/16 default via x.x.x.y dev ext1 Clients have 192.168.0.1 as gateway, which is redirecting them to 10.30.1.1

  Read the article

• Website hosting from home - IIS6

  - by Paul

  I'm wanting to host a few websites from home, primarily because I'm using some BETA Microsoft software (.NET 4 and EF) and don't want to install it on my production server which is hosted at eukhost.com. Basically, I'm completely new to this sort of thing. So far, here is what I've done: Registered the domain name at namecheap.com (let's call it mydomain.com) Gone to "Nameserver Registration" in the panel and entered my IP address for the NS1 and NS2 records (let's say the IP is 0.0.0.0). Gone to "Domain Name Server Setup" and entered ns1.mydomain.com & ns2.mydomain.com Forwarded requests from port 80 to my internal IP (let's say 192.168.1.254) Created the website in IIS (I'm just testing with a single website so far, so have not created any host header values) Now, if I type in the IP address (http://0.0.0.0) I get the site as expected. However, if I enter http://www.mydomain.com I get an error saying "DNS Error - Cannot find server". I'm aware that there is a service from DynDNS that will automatically change the IP if I have a dynamic address, however my IP has remained static since I installed the ISP (since October) so I don't need this. Is there any way that I can get the DNS to work just by configuring IIS or something in Windows? I don't really want to have to pay for any 3rd party service. Thanks,

  Read the article

• "Safe" personal router use on apartment-wide network

  - by noisetank

  I recently moved into an apartment with internet included in my rent. This was a boon at first, but now I'm feeling limited. To get devices connected (wired or wireless), I have to whitelist the MAC addresses on mycampusnet.com. This is annoying (considering I'm well over the 10 device limit including my roommate's stuff), but what's really driving me mad is that I don't seem to have any semblance of a "local" network. I've relied heavily on static IPs and port forwarding in the past (accessing NAS and remote desktop) and (as far as I can understand), that functionality is nonexistent without my router set up. Also, as my wired and wireless devices don't always seem to make it onto the same subnet, I'm unable to use any of my iDevices with my Apple TV (I can, however, mirror to no less than four strangers' Apple TVs at any moment, which is a whole other level of discomforting). I've talked to the head of the apartment complex and she told me that they personally don't have any issue with my using a router, but the provider (CampusConnect) does not currently allow it. Apparently, enough people have put in complaints/requests about the restriction (the apartments are for graduate students and University staff, many of which need to set up things like VPNs for work reasons) to open up some sort of ticket to get the functionality in place, but all the calls I've made to get status updates have been a waste of time. My question is: If I plugged my router into the apartment network, what would happen? I've been told already that personal routers would "interfere with the wireless" and that they would shut my port down if I used one, but is that a legitimate thing or just something made up that sounds real to keep the average Joe from pushing it further? I'm guessing there's some way of configuring my router to keep it from disrupting the rest of the network, but it's not something they want to tell me for obvious reasons. Am I right? And if so, what are the chances that they'd notice the difference in traffic or whatever and shut off my port?

  Read the article

• Is there a way to run CUDA applications with the CUDA device being a secondary adapter?

  - by Slartibartfast

  I've been trying to run a CUDA program on a remote computer which has Windows 7 installed. The GPU is GeForce GTX 480. One of the problems I've been facing is that, the computer has two adapters, 1) Standard VGA Adapter 2) NVIDIA GeForce GTX 480 Even though this shows in the device manager. The desktop uses the standard VGA Adapter. I'm assuming this is because the Standard VGA is the primary adapter. Also the device manager shows that the monitor is connected to the standard VGA Adapter. In this scenario if i try to run any CUDA application it fails to recognise a CUDA capable device. Is it necessary for the NVIDIA adapter to be the primary one? Or is there any way to use CUDA when the graphics card is a secondary adapter. I've seen a few posts in the NVIDIA forums on this before, one suggests using another low cost NVIDIA card as the primary adapter, but that is currently not an option. I couldn't find any other solutions. Thanks I tried running the deviceQuery test from the NVIDIA GPU Computing Samples. This was the result i obtained CUDA Device Query (Runtime API) version (CUDART static linking) cudaGetDeviceCount FAILED CUDA Driver and Runtime version may be mismatched FAILED The driver version I'm using is 263.06. The CUDA version is 3.2 I ran the same test on my desktop which also has windows 7 and a GeForce GTX 465. The CUDA toolkit version is 3.2. The driver version was the same and the test passed, although it failed with an older driver.

  Read the article

• Website has become slower on a VPS, was much fast on a shared host. What's wrong?

  - by Arpit Tambi

  My shared host suspended my website stating system overload, so I moved my website to a VPS which has 4GB RAM. But for some reason the website has become very slow. This is the vmstat output - procs -----------memory---------- ---swap-- -----io---- --system-- -----cpu------ r b swpd free buff cache si so bi bo in cs us sy id wa st 1 0 0 3050500 0 0 0 0 0 1 0 0 0 0 100 0 0 Here's the Apache Benchmark output for a STATIC html page I ran on the server itself - Benchmarking www.ask-oracle.com (be patient)...apr_poll: The timeout specified has expired (70007) Total of 20 requests completed Update: Server Config: List item Centos 5.6 4 cores cpu 4 GB RAM LAMP stack with APC Wordpress Only one website It takes almost double time to load now, same website was much fast on shared hosting. I know I need to tweak some settings but have no clue where to start from? I have already tried to optimize apache, mysql etc. Update 2: CPU usage is low, see uptime output: 11:09:02 up 7 days, 21:26, 1 user, load average: 0.09, 0.11, 0.09 Update 3: When I load any webpage, browser shows "Waiting" for a long time and then page loads quickly. So I suspect server can accept only limited connections and holds extra connections in a waiting state. How to check this? Update 4: Following is the output on executing netperf TCP STREAM TEST from 0.0.0.0 (0.0.0.0) port 0 AF_INET to localhost.localdomain (127.0.0.1) port 0 AF_INET Recv Send Send Socket Socket Message Elapsed Size Size Size Time Throughput bytes bytes bytes secs. 10^6bits/sec 87380 16384 16384 10.00 9615.40 [root@ip-118-139-177-244 j3ngn5ri6r01t3]# Here are the Apache MPM settings from httpd.conf, do they look okay? <IfModule worker.c> StartServers 5 MaxClients 100 MinSpareThreads 50 MaxSpareThreads 250 ThreadsPerChild 125 MaxRequestsPerChild 10000 ServerLimit 100 </IfModule>

  Read the article

• Apache-style multiviews with Nginx

  - by Kenn

  I'm interested in switching from Apache/mod_php to Nginx for some non-CMS sites I'm running. The sites in question are either completely static HTML files or simple PHP, but the one thing they have in common is that I'm currently using Apache's mod_negotiation to serve them up without file extensions. I'm not concerned with actual content negotiation; I'm using this just so I don't have to use file extensions in my URLs. For example, the file at /info/contact.php is accessed via a URL of just /info/contact The actual file is a .php file in that location, but I don't use the extension in the URLs. This gives me slightly shorter, cleaner URLs and also doesn't expose what's essentially a meaningless implementation detail to the user. In Apache, all this takes is enabling mod_negotiation and adding +MultiViews to the Options for the site. In Nginx I gather I'll be rewriting somehow but being new to Nginx, I'm not exactly sure how to do it. These sites are currently working fine proxied from Nginx to Apache, but I'd like to try running them solely with Nginx/fastcgi. They work fine this way as long as I'm using the extensions, so the fastcgi aspect is working great. My concern now is just with removing those extensions. It's important to keep in mind that the filename is not always in the URL, in the case of subdirectories. That is, /foo/bar should look for /foo/bar.php or /foo/bar/index.php /foo/ should look for /foo/index.php Is there a simple way to achieve this with Nginx or should I stick with proxying to Apache?

  Read the article

• Is it possible to change an "Unidentified Network" into a "Home" or "Work" network on Windows 7

  - by Rhys

  I have a problem with Windows 7 RC (7100). I frequently use a crossover network cable on WinXP with static IP addresses to connect to various industrial devices (e.g. robots, pumps, valves or even other Windows PCs) that have Ethernet network ports. When I do this on Windows 7, the network connection is classed as an "Unidentified Network" in Networks and Sharing Center and the public firewall profile is enforced by Windows. I do not want to change the public profile and would prefer to use the Home or Work profile instead. For other networks like Home and Work I'm able to click on them and change the classification. This is not available for unidentified networks. My questions are these:- Is there a way to manual override the "Unidentified Network" classification? What tests are performed on the network that fail, therefore classifying it as an "Unidentified Network" By googling (hitting mainly vista issues) it seems that you need to ensure that the default gateway is not 0.0.0.0. I've done this. I've also tried to remove IPv6 but this does not seem possible on Windows 7.

  Read the article

• ports only available from the outside network

  - by ChrisJ

  This is a counter-intuitive problem for me. I have a new Win 2003 server on a static IP address w.x.y.z. Tomcat 7, PostgreSQL 9.1, and Subversion are installed. All of it appears to be working fine from the server itself. We can also access the Tomcat manager, web applications, and run "svn ls svn://w.x.y.z/" from outside our network. However, when I try from another machine in the office, phpPgAdmin and svn cannot establish connections with the server. http://w.x.y.z:5432/phppgadmin cannot connect. The svn command from above returns: svn: E730061: Unable to connect to a repository at URL 'svn://w.x.y.z/' svn: E730061: Can't connect to host 'w.x.y.z': No connection could be made because the target machine actively refused it. Tomcat manager and the other web apps we have deployed work fine. Netstat -a from the server shows this: Proto Local Address Foreign Address State TCP SERVERNAME:3690 SERVERNAME:0 LISTENING TCP SERVERNAME:5432 SERVERNAME:0 LISTENING Windows Firewall was off, but just in case I also tried to enable it and open ports 3690 (svn) and 5432 (postgres). No change. I don't have access to the router/switch because it just doesn't work that way in Port-au-Prince and our sysadmin is on R&R. Is there anything that might be causing the problem from the server side?

  Read the article

• Need help using a super scope

  - by Vdub

  I have a windows server 2008 r2 standard running our DCHP, DNS, and AD. also I have (3) HP Pro Curve 2510-G switches (J9280A). Right now our LAN is set up 192.168.50.2-192.168.50.254 on our sub-net (A) and another scope with 192.168.51.2-192.168.51.254 sub-net (B) both have sub-net mask of 255.255.255.0. The same server is our DNS which is 192.168.50.242 and our firewall (watchguard) is the gateway at 192.168.50.1. Right now the sub-net (B) does not have DHCP active so only sub-net (A) is giving a pool. My problem is that we are trying to have open WiFi on our network and i am assuming that i can use the sub-net (B) for that if i activate it and use sub-net (A) for our staff only. I have noticed that when i set up a static on a client pc and set it to 192.168.51.x i cannot use the DNS of 192.168.50.242 however i can use 8.8.8.8 and it works fine, i am guessing that because it is on a different sub-net? Forgive me as i am very new at this and dont know a lot. Is there easy way with the equipment i have to a accommodate wifi for hundreds of people without causing problems for our staff? (multiple same IP address assigns) I appreciate any and all info!

  Read the article

• ssl port didnt work on nginx

  - by Jin Lin

  I set up the unicorn and nginx on one of my ec2 machine. and my request are loading ok with nginx listen to port 80. but when I enable it to ssl, which listen to port 443. It doesn't work. and it can still work with port 80, https. server { listen 443 ssl; # replace with your domain name server_name domain.com; # replace this with your static Sinatra app files, root + public root /home/ubuntu/domain/public; ssl on; ssl_certificate /etc/ssl/domain.crt; ssl_certificate_key /etc/ssl/domain.key; # maximum accepted body size of client request client_max_body_size 4G; # the server will close connections after this time keepalive_timeout 5; location ~ ^/assets/ { add_header ETag ""; gzip_static on; expires max; add_header Cache-Control public; } location / { proxy_set_header X-Forwarded-Proto https; try_files $uri @app; } location @app { proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Host $http_host; proxy_redirect off; # pass to the upstream unicorn server mentioned above proxy_pass http://unicorn_server; } }

  Read the article

• dns in a small network with router and AD domain

  - by Felix

  I have a small office network with router (running OpenWRT), Windows Domain Controller (used to be 2008R2; I just backed it up and upgraded to 2012), about a dozen AD clients (3 server and windows workstation) and several non-AD clients (network printer, PBX). The problem is that the clients can't access servers by name (only by IP). I tried all kind of permutations. Right now domain controller runs DNS server for all desktops; but unless I put an entry in hosts file - I can only get by IP. I have router as DHCP server (since not all devices are on AD); and except for Domain Controller all IP addresses, including "static", are assigned by the router. Most frustrating, some servers sometimes just work! for example, I can often get to the Linux box by name (it is part of Domain using Beyond Trust Integration Services); but I can never get to SQL Server box. Seems like non-domain devices see more names than domain members... This network should be fairly typical; but I couldn't get any guidance about how to set up DNS/DHCP service to make all nodes happy. The closest is this question, but still it's different! Thanks

  Read the article

• Does MySQL have some kind of DoS protection or per-user query limit?

  - by Ghostrider

  I'm a bit at a loss. I'm running a MySQL database that's roughly 1GB data in indices combined on a dedicated Linux server. DB version is '5.0.89-community'. Configuration is controlled via cPanel. PHP actually runs elsewhere on a shared hosting. IP addresses are static and don't change. Access from remote IP address is properly configured. Website gets around 10K hits per day with each hit generating a a database query. Some of these queries are expensive (~1 sec execution time). All is fine and well until at some point DB server starts refusing connections from the client, claiming that specific user can't access the server from that IP. Resetting the server will always fix the problem for a day or two and then the same thing happens. There are some other DBs on that server, some of which are hit pretty hard on occasion but constantnly. One of the apps maintains several persistent connections since it does couple of updates per minute. Though I don't think it's related. What's driving me mad is that I can't figure out why server would start refusing connections. There is nothing in the logs. This server is a hosted dedicated server so hosting company created the OS image and I didn't write or go over every line of configuration. I'd do it but I'm at a loss as to where start looking. Any advice is appreciated.

  Read the article

• Connecting to my home router web interface from work

  - by Joe

  Hi, I'm trying to connect to my home router web interface from work. I use dyndns, because I don't have a static IP at home, and it works perfectly from any other place except my workplace (update: I made a mistake, see edit below). When trying to access the web interface from work I get a "500 Server Error" with the code: SERVER_RESPONSE_RESET. I'm not trying to use any protocols such as remote desktop, I'm only trying to access the web interface. I can access any other web page from my workplace with no problems, and I think my router web interface is like any other web page, isn't it? I thought maybe my work place proxy blocks addresses of services like dyndns, so I also applied another trick. Since I have a web page on my own domain (say www.mydomain.com) which I can access from work, I tried adding a CNAME to my domain which is linked to the dyndns address (router.mydomain.com). This way if anyone enters the address router.mydomain.com from anywhere, they reach my home router web interface, and there's no way of knowing it's a dyndns address (or is there?). However, it still doesn't work from my workplace (I get the same error message). Any ides? Edit: I'm sorry to say I made a mistake earlier. I used to be able to access my home router web interface from my old workplace, and I thought it was still possible since I don't recall making any configuration changes. However, after reading the replies, I went over to my old workplace and checked, and it doesn't work from there either. I'm very sorry for giving out wrong and misleading information about my problem. So to summarize: my problem is that I can't access my home router web interface from anywhere.

  Read the article

• how to go about scaling a web-application ?

  - by phoenix24

  for someone whoes been primarily a web-application developer, and know not much about scaling/scalability techniques. I'll start by stating my application is written in Python, using Django; a fairly standard setup. I currently use Apache 2.2 for my webserver, and MySql for my database server; both running on the same vps server. Up until now, it was basically a prototype and merely 15-30 concurrent users at any given time; so I had no issues, but now since we'll be adding more users we'll have severe performance issues. So my question is how do i go about scaling my web-application? and my plan is as follows. Now I have just one vps server running, apache + mysql. Next, I plan to add another vps server, to run only MySql; so i'll have one web-server and one db server. Next, I'll add Memcache to the webserver for caching data; and taking some load off mysql. Next, another web-server for serving all the static content; Next, a vps server for load-balancing (nginx/varnish) behind which would be my two web-servers and then db-server. Does that sound like a workable strategy, please guide me around here.

  Read the article

• Domain changes required for SSL integration

  - by user131003

  Currently my site supports regular payment options (User is taken to Payment Gateway/PG website). Now I'm trying to implement "seamless" PG integration. I need SSL for this. I'm having a dedicated server with 5 static IPs from Hostgator/HG. options: I take SSL for www.my_domain.com. According to HG, I need to change IP of main site as current IP is not really dedicated as it is being shared by cpanel etc. So They need to bind another dedicated IP to main domain for SSL to work. This would required DNS change for main website and hence cause few hours downtime (which is ok). I've noticed that most of the e-commerce websites are using subdomains like secure.my_domain.com for ssl/https. This sounds like a better approach. But I've got few doubts in this case: a) Would I need to re-register with existing PGs (Paypal, Google Checkout, Authorize.net) if I switch to subdomain? Re-registering is not an option for me. b) Would DNS change be required for www.my_domain.com in this case. This confusion arose because of following reply from HG : "If the sub domain secure.my_domain.com is added to an existing cPanel it will use the IP for that cPanel so as long as it is a Dedicated IP that will be fine. If secure.my_domain.com gets setup as its own cPanel it will need to be assigned to a Dedicated IP which would have a DNS change involved.". PLease suggest.

  Read the article

• Can I use a Windows Server 2003 Domain Controller but my home router for DNS?

  - by NetworkingWannabie

  Hi All Probably easiest to start with a description of my current setup, which works (oh, and this is a home setup not an office or anything): I have an ADSL modem with a static IP address (192.168.128.1), and its DHCP capability is disabled. I have a permanently powered up Windows Server 2003 machine with a fixed IP (192.168.128.2) which provides my domain controller, dhcp, and dns. The default gateway for everything is my ADSL modem everything is setup to use the WS2003 machine as the primary DNS with the ADSL modem as Secondary DNS just in case the server goes down (everything includes the server itself). Lastly, just in case it's relevant, I have my DHCP leases set to infinite (or whatever the right term is). Everything is pretty hunky dory. Except, that is, for the fact that my server is ALWAYS on, and it isn't always used, so I'm burning juice that I don't need to - my server burns around 120W which isn't immense but isn't irrelevant either, so I'd like to put it into a stand-by state when it isn't being used (the more standby the better) and then get the clients to wake it up. Am I correct in assuming that this won't work at the moment - A given client would need an IP address to wake the machine up, and it needs to machine to be awake to get an IP - catch 22? Assuming I'm correct, can I move to using my router (which is always on) for DHCP? What impact will this have on DC and DNS? Alternatively, does anyone have a better way for me to achieve this? Can I get the server to wake up when it sees clients look for a DHCP server, etc? Wow, that came out longer than expected! Thanks for your help.

  Read the article

• Multimaster Keepalived Configuration (Virtual IP with Load Balancing)

  - by Rad Akefirad

  Here are requirements: 1. High Availability 2. Load Balancing First configuration 1. Two linux servers have been configured with one static IP for each: 10.17.243.11, 10.17.243.12 2. Keepalived has been installed and configured with one VRRP instance to provide one virtual IP (10.17.243.10 as VIP, 10.17.243.11 as master and 10.17.243.12 as backup). 3. Everything works fine. The VIP is assigned to the master server (10.17.243.11) as long as it is up and running. As soon as it goes down, the VIP will be assigned to the backup server (10.17.243.12). 4. The problem here is all communication goes to the master server. Second configuration 1. I found active-active configuration for Keepalived which is possible by defining more than one VRRP instance. So that both server have two IPs (real 10.17.243.11 and virtual 10.17.243.10 for server #1 and real 10.17.243.12 and virtual 10.17.243.20 for server #2. 2. Everything works fine. we have two VIPs which are accessible (HA). But all communication coming to each IP still goes to one single machine (either server #1 or #2 depending on the IP). However I found some tricks on the DNS to overcome this limitation. But it's not acceptable in our case. Question: Is there any way to have one virtual IP which is assigned to both servers? By that I mean both servers are handling some part of workload (like the thing we do in web server load balancing)? By using either keepalived or some other tools? Thanks in advance.

  Read the article

• Webserver max CPU when apache and MYSQL are ran together

  - by Tim

  This website has been running fine without issues, Recently it went down. After some investigation it looks like the combo of MYSQL and Apache bring the box to its knees. Apache can run find serving static web pages and MYSQL can run fine when the website isn't working. As soon as the website is enabled with SQL running the CPU on the box remains at 100%. Picture of the usage: http://i.stack.imgur.com/GG2NC.png I've checked the sql database for errors, tried tuning nearly every parameter in apache/sql's conf file for performance. The server is a redhat based box running the latest software packages. Any help/suggestions are welcome. Doing an strace on a high cpu apache process I see the following: read(14, "", 8192) = 0 close(14) = 0 socket(PF_FILE, SOCK_STREAM, 0) = 14 fcntl64(14, F_SETFL, O_RDONLY) = 0 fcntl64(14, F_GETFL) = 0x2 (flags O_RDWR) connect(14, {sa_family=AF_FILE, path="/var/lib/mysql/mysql.sock"...}, 110) = 0 setsockopt(14, SOL_SOCKET, SO_RCVTIMEO, "\2003\341\1\0\0\0\0", 8) = 0 setsockopt(14, SOL_SOCKET, SO_SNDTIMEO, "\2003\341\1\0\0\0\0", 8) = 0 setsockopt(14, SOL_IP, IP_TOS, [8], 4) = -1 EOPNOTSUPP (Operation not supported) setsockopt(14, SOL_SOCKET, SO_KEEPALIVE, [1], 4) = 0 Here is what I see from a mysql process: futex(0x86fc9a4, FUTEX_WAIT_PRIVATE, 39, NULL) = 0 futex(0x86fc734, FUTEX_WAIT_PRIVATE, 2, NULL) = 0 futex(0x86fc734, FUTEX_WAKE_PRIVATE, 1) = 0 gettimeofday({1301465020, 141613}, NULL) = 0 clock_gettime(CLOCK_REALTIME, {1301465020, 141699633}) = 0 futex(0x8707a64, FUTEX_WAIT_PRIVATE, 1, {4, 999913367}) = 0 futex(0x8707a40, FUTEX_WAIT_PRIVATE, 2, NULL) = 0 futex(0x8707a40, FUTEX_WAKE_PRIVATE, 1) = 0 exit_group(0) = ?

  Read the article

• android geting data from sql

  - by sagar

  Hello i m new to android. i wont to connect to sql server for store and get data so so me one can help me sending code of android for do it.. i had tried to do tht with java nd it was workink but now i wont to create a aplication for android my java code is :: import java.sql.*; public class MysqlTest { public static void main (String[] args) { Connection conn = null; try { String userName = "pietro"; //change it to your username String password = "pietro"; //change it to your password String url = "jdbc:mysql://192.168.0.67:3306/registro"; Class.forName("com.mysql.jdbc.Driver").newInstance(); conn = DriverManager.getConnection(url, userName, password); Statement s = (Statement) conn.createStatement(); // code for create a tabel in server s.execute("create table School2 (rolno integer,sub text)"); // code for create a tabel in server s.execute("insert into School2(rolno,sub)values(10,'java')"); //code for add value in tabel s.execute("select rolno,sub from School2");//code for add value in tabel s.close(); System.out.println("Database connection established"); } catch (Exception e) { System.err.println("Cannot connect to database server"); } finally { if (conn != null) { try { conn.close (); System.out.println("Database connection terminated"); } catch (Exception e) { /* ignore close errors */ } } } } }

  Read the article

• Adding Netem Filter Rules

  - by fontsix

  iam new in programming and using linux. My Question is, is it possible to add Netem Filter Rules later ? I want to create an PHP-Interface for Netem and I don't know how much filters were required. This should be some kind of dynamically. In Example : A user with a static IP starts an Netem Command (Latency) with PHP Interface this means these five command werde executed by php in the first step $classid = 11; $handle = 10; "sudo tc qdisc add dev eth0 handle 1: root htb"; "sudo tc class add dev eth0 parent 1: classid 1:1 htb rate 100Mbps"; "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; Now, if there would be a second user who wants to use Netem independent of the first user, i only want to execute the last 3 commands, like "sudo tc class add dev eth0 parent 1:1 classid 1:$classid htb rate 100Mbps"; "sudo tc qdisc add dev eth0 parent 1:$classid handle $handle: netem delay 100ms"; "sudo tc filter add dev eth0 protocol ip parent 1:0 prio 3 u32 match ip dst $dest flowid 1:$classid"; There is an Algorithmus for increasing variables $classid and $handle. This should work. Now my Question: Is it possible only to add these 3 commands to add a new class with new qdisc and a new filter rule ? Or how can i realize it ? The Apache Error_log tells me "sh: line 1: flowid: command not found" but i can't find any mistake. I hope you could help Best regards fontsix

  Read the article

• New build won't boot: some fans turning, no beep or video

  - by Dave

  When my new system is powered up, the case fan and power supply fans turn fine. The CPU fan twitches, but never gets going. Although I've heard that with AMDs and Gigabyte motherboards that is not necessary a problem. Hard drive is spinning. However, there is absolutely no indication that anything else is happening. The motherboard, as far as I can tell, does not have an internal speaker, but I harvested one from another machine and plugged it in and still no beeps at all. The monitor screen stays black, on both the integrated VGA and DVI. This is a brand new build, and has never successfully booted. My parts are: AMD Athlon II X2 245 Regor 2.9GHz Socket AM3 65W Dual-Core Processor Model ADX245OCGQBOX - includes CPU cooler) GIGABYTE GA-MA785GPMT-UD2H AM3 AMD 785G HDMI Micro ATX AMD Motherboard - Retail G.SKILL Ripjaws Series 4GB (2 x 2GB) 240-Pin DDR3 SDRAM DDR3 1333 (PC3 10666) Desktop Memory Model F3-10666CL8D-4GBRM - Retail CORSAIR CMPSU-400CX 400W ATX12V V2.2 80 PLUS Certified Compatible with Core i7 Power Supply - Retail SAMSUNG Spinpoint F3 HD502HJ 500GB 7200 RPM SATA 3.0Gb/s 3.5" Internal Hard Drive -Bare Drive COOLER MASTER Elite 341 RC-341C-KKN1-GP Black Steel MicroATX Mid Tower Computer Case - Retail I also have a DVD burner, but it acts the same whether that is plugged in or not. I'm using the on board video. What I've tried so far: I've switched power supplies, with no difference. I've tried different monitors (of which all are working on other machines) with no difference. I have tried putting it one memory module at a time, with no difference. I have tried the absolute minimum I can think of (power supply into motherboard, power button ONLY plugged into front panel, CPU fan plugged in), with no difference. I appreciate any ideas anyone might have. Do I need to RMA the motherboard? This is my first build, so there might be something obvious. I was very careful in assembly with static; I'm confident nothing was zapped during assembly.

  Read the article

< Previous Page | 416 417 418 419 420 421 422 423 424 425 426 427  | Next Page >