Search Results

Search found 35244 results on 1410 pages for 'version numbers'.

Page 421/1410 | < Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >

  • Installing isolated instance of MySQL on Windows using silent install with .msi

    - by Abram
    I'm trying to write an installer for an internal application we wrote. After it installs our application it then installs MySQL using the .msi installer in silent mode. I specify the install dir and data dir to that of a directory within my application's install directory, such as: msiexec /i @@MYSQL_INSTALLER_FILE@@ /qn INSTALLDIR="@@INSTALL_DIR@@\MySQL\" DATADIR="@@INSTALL_DIR@@\MySQL\" USERNAME="@@DB_USER@@" PASSWORD="@@DB_PASS@@" (the @@variable@@'s are replace by my installer routine using InstallJammer) Once installed, I use mysqld.exe to install a windows service with a custom service name and defaults file like so: mysqld.exe --install CustomMySQL --defaults-file="@@INSTALL_DIR@@\MySQL\my.ini" This works fine as long as there is not already another instance of MySQL installed. If there is it silently fails to install MySQL. Running the msi installer manually (double-click) shows an error that a previous version is already installed and just aborts. Is there a way to automate installing MySQL as an isolated instance, regardless of whether another version/instance is already installed?

    Read the article

  • Cheapest way to connect 20-24 Sata II HDDs in a budget storage server?

    - by Joe Hopfgartner
    I need to assemble a high density storage server for as cheap as possible. It's been a while for me and the last systems I integrated didn't even have Sata yet... During my Research I of course stumbled about Nexsan SATA Beast, the BackBlaze storage Pods as well as some ridiculously overpriced HP Proliant or Dell storage solutions. Finally I choose Norco cases as the way to go. My eye is set on the RPC-4020, which is a 4U 19" Rackmount case with 20 Hot Swap 3.5" SATA/SAS Hdd trays (Backplanes included) and room for two 2.5" OS drives as well as a Slim Line CD-Rom. The backplanes connect with a single SATA port for each drive, so there are 20 internal SATA ports to to be connected. They also have redundant power ports which I think is quite nice. The cheapest price I have found is 290$ + 40$ shipping. In europe the cheapest unfortunately is 370€ (500$) + 40 € shipping... A nice alternative would be the RPC-4224 which has SFF-8087 Mini SAS connectors that bundle 4 SATA trays each. But it doesn't seem to be available in Europe (where i am) anywhere. So here comes my problem: What Mainboard/Controller to choose to connect them for as cheap as possible while still having nice data rates? I have to say that the server is intended as a Storage server with 1gps connectivity and the data transfer will be distributed very evenly across all drives. I also don't require any raid functionality. This is all done at application level, I just need JBOD. So for example if I go for the RPC 4020 Model I need to connect 20 Storage + 1 OS + 1 CDROM Sata ports. I searched a bit and stumbled across this very low priced controller: http://www.intel.com/products/server/raid-controllers/SASWT4I/SASWT4I-overview.htm They sell it for 115 € here and the specs say it can control up to 122 hard discs and has 4 Mini SAS connectors. So I would use 4 Mini SAS 36pin - 4 SATA 7pin cables to connect 4 SATA drives to each port and choose a Mainboard taht has 6 SATA on board (for example this one) and hurray, I can connect my 22 SATA devices for as low as about ~ 220 EUR (cpu, ram, psu, case not counted) Question: WOULD THAT WORK? And if not, why? 2nd Question: If I go for the 4220 or 4224 Model, I have internal Mini SAS connectors. Am I right in assuming that the backplane than acts as a "SAS Expander"? And can I just plug these SAS connectors into any SAS port I can find on my controller / mainboard or are there certain requirements? I know that SATA port multipliers only work with controllers that are ready for that. But isn't this expansion already implemented in the SAS standard? I am sorry that this is a very broad question, but I really spent the last week reading up and it seems to be not so clear! Especially all the controlling hardware specifications! 3rd Question: A lot of hardware specs feature "internal channels" and "internal connectors". The connecors are the physical numbers of places where I can plug a cable in. I got that. But are the "internal channels" always the maximum numbers of physical drives that can be used in the end? Or can I enhance this further by Expanders/Fanouts? 4th and last question: What do you think about the setup so far? Do you know any good alternatives? Maby I am completely going the wrong way and some DAS would be way better? Are there any comparable chassis available in europe? Please feel free to say whatever you think is relevant to the subject!

    Read the article

  • Unable to find valid certification path to requested target while CAS authentication

    - by Dmitriy Sukharev
    I'm trying to configure CAS authentication. It requires both CAS and client application to use HTTPS protocol. Unfortunately we should use self-signed certificate (with CN that doesn't have anything in common with our server). Also the server is behind firewall and we have only two ports (ssh and https) visible. As far as there're several application that should be visible externally, we use Apache for ajp reverse proxying requests to these applications. Secure connections are managed by Apache, and all Tomcat are not configured to work with SSL. But I obtained exception while authentication, therefore desided to set keystore in CATALINA_OPTS: export CATALINA_OPTS="-Djavax.net.ssl.keyStore=/path/to/tomcat/ssl/cert.pfx -Djavax.net.ssl.keyStoreType=PKCS12 -Djavax.net.ssl.keyStorePassword=password -Djavax.net.ssl.keyAlias=alias -Djavax.net.debug=ssl" cert.pfx was obtained from certificate and key that are used by Apache HTTP Server: $ openssl pkcs12 -export -out /path/to/tomcat/ssl/cert.pfx -inkey /path/to/apache2/ssl/server-key.pem -in /path/to/apache2/ssl/server-cert.pem When I try to authenticate a user I obtain the following exception: Caused by: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target at sun.security.provider.certpath.SunCertPathBuilder.engineBuild(SunCertPathBuilder.java:174) ~[na:1.6.0_32] at java.security.cert.CertPathBuilder.build(CertPathBuilder.java:238) ~[na:1.6.0_32] at sun.security.validator.PKIXValidator.doBuild(PKIXValidator.java:318) ~[na:1.6.0_32] Meanwhile I can see in catalina.out that Tomcat see certificate in cert.pfx and it's the same as the one that is used while authentication: 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Constructing validation url: https://external-ip/cas/proxyValidate?pgtUrl=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_proxyreceptor&ticket=ST-17-PN26WtdsZqNmpUBS59RC-cas&service=https%3A%2F%2Fexternal-ip%2Fclient%2Fj_spring_cas_security_check 09:11:38.886 [http-bio-8080-exec-2] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. keyStore is : /path/to/tomcat/ssl/cert.pfx keyStore type is : PKCS12 keyStore provider is : init keystore init keymanager of type SunX509 *** found key for : 1 chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** trustStore is: /jdk-home-folder/jre/lib/security/cacerts Here is a lot of trusted CAs. Here is nothing related to our certicate or our (not trusted) CA. ... 09:11:39.731 [http-bio-8080-exec-4] DEBUG o.j.c.c.v.Cas20ProxyTicketValidator - Retrieving response from server. Allow unsafe renegotiation: false Allow legacy hello messages: true Is initial handshake: true Is secure renegotiation: false %% No cached client session *** ClientHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 63, 239, 180, 32, 103, 140, 83, 7, 109, 149, 177, 80, 223, 79, 243, 244, 60, 191, 124, 139, 108, 5, 122, 238, 146, 1, 54, 218 } Session ID: {} Cipher Suites: [SSL_RSA_WITH_RC4_128_MD5, SSL_RSA_WITH_RC4_128_SHA, TLS_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_RSA_WITH_AES_128_CBC_SHA, TLS_DHE_DSS_WITH_AES_128_CBC_SHA, SSL_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_RSA_WITH_3DES_EDE_CBC_SHA, SSL_DHE_DSS_WITH_3DES_EDE_CBC_SHA, SSL_RSA_WITH_DES_CBC_SHA, SSL_DHE_RSA_WITH_DES_CBC_SHA, SSL_DHE_DSS_WITH_DES_CBC_SHA, SSL_RSA_EXPORT_WITH_RC4_40_MD5, SSL_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_RSA_EXPORT_WITH_DES40_CBC_SHA, SSL_DHE_DSS_EXPORT_WITH_DES40_CBC_SHA, TLS_EMPTY_RENEGOTIATION_INFO_SCSV] Compression Methods: { 0 } *** http-bio-8080-exec-4, WRITE: TLSv1 Handshake, length = 75 http-bio-8080-exec-4, WRITE: SSLv2 client hello message, length = 101 http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 81 *** ServerHello, TLSv1 RandomCookie: GMT: 1347433643 bytes = { 145, 237, 232, 63, 240, 104, 234, 201, 148, 235, 12, 222, 60, 75, 174, 0, 103, 38, 196, 181, 27, 226, 243, 61, 34, 7, 107, 72 } Session ID: {79, 202, 117, 79, 130, 216, 168, 38, 68, 29, 182, 82, 16, 25, 251, 66, 93, 108, 49, 133, 92, 108, 198, 23, 120, 120, 135, 151, 15, 13, 199, 87} Cipher Suite: SSL_RSA_WITH_RC4_128_SHA Compression Method: 0 Extension renegotiation_info, renegotiated_connection: <empty> *** %% Created: [Session-2, SSL_RSA_WITH_RC4_128_SHA] ** SSL_RSA_WITH_RC4_128_SHA http-bio-8080-exec-4, READ: TLSv1 Handshake, length = 609 *** Certificate chain chain [0] = [ [ Version: V1 Subject: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country Signature Algorithm: SHA1withRSA, OID = 1.2.840.113549.1.1.5 Key: Sun RSA public key, 1024 bits modulus: 13??a lot of digits here??19 public exponent: ????7 Validity: [From: Tue Apr 24 16:32:18 CEST 2012, To: Wed Apr 24 16:32:18 CEST 2013] Issuer: CN=wrong.domain.name, O=Our organization, L=Location, ST=State, C=Country SerialNumber: [ d??????? ????????] ] Algorithm: [SHA1withRSA] Signature: 0000: 65 Signature is here 0070: 96 . ] *** http-bio-8080-exec-4, SEND TLSv1 ALERT: fatal, description = certificate_unknown http-bio-8080-exec-4, WRITE: TLSv1 Alert, length = 2 http-bio-8080-exec-4, called closeSocket() http-bio-8080-exec-4, handling exception: javax.net.ssl.SSLHandshakeException: sun.security.validator.ValidatorException: PKIX path building failed: sun.security.provider.certpath.SunCertPathBuilderException: unable to find valid certification path to requested target I tried to convert our pem certificate to der format and imported it to trustedKeyStore (cacerts) (without private key), but it didn't change anything. But I'm not confident that I did it rigth. Also I must inform you that I don't know passphrase for our servier-key.pem file, and probably it differs from password for keystore created by me. OS: CentOS 6.2 Architecture: x64 Tomcat version: 7 Apache HTTP Server version: 2.4 Is there any way to make Tomcat accepts our certificate?

    Read the article

  • Passwordless ssh failed when login using username

    - by Aczire
    I was trying to setup Hadoop and was stumbled on passwordless ssh to localhost. I am getting a password prompt when trying to connect using ssh username@hostname format. But there is no problem connecting to the machine like ssh localhost or ssh hostname.com. Tried ssh-copy-id user@hostname but it did not work. Using CentOS 6.3 as normal user, I neither have root access or am a sudoer so editing any files like sshd_config is not possible (not even cat the sshd_config file contents). I hope the user login is possible since I can do login without password to localhost, right? Please advise, Here is the ssh debug output. [[email protected] ~]$ ssh -v [email protected] OpenSSH_5.3p1, OpenSSL 1.0.0-fips 29 Mar 2010 debug1: Reading configuration data /etc/ssh/ssh_config debug1: Applying options for * debug1: Connecting to hostname.com [::1] port 22. debug1: Connection established. debug1: identity file /home/user/.ssh/identity type -1 debug1: identity file /home/user/.ssh/id_rsa type -1 debug1: identity file /home/user/.ssh/id_dsa type 2 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.3 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'hostname.com' is known and matches the RSA host key. debug1: Found key in /home/user/.ssh/known_hosts:1 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey,gssapi-keyex,gssapi-with-mic,password debug1: Next authentication method: gssapi-keyex debug1: No valid Key exchange context debug1: Next authentication method: gssapi-with-mic debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information Credentials cache file '/tmp/krb5cc_500' not found debug1: Unspecified GSS failure. Minor code may provide more information debug1: Unspecified GSS failure. Minor code may provide more information debug1: Next authentication method: publickey debug1: Offering public key: /home/user/.ssh/id_dsa debug1: Server accepts key: pkalg ssh-dss blen 434 Agent admitted failure to sign using the key. debug1: Trying private key: /home/user/.ssh/identity debug1: Trying private key: /home/user/.ssh/id_rsa debug1: Next authentication method: password [email protected]'s password:

    Read the article

  • Asus EeePC X101CH Touchpad issue

    - by ssvarc
    I have an Asus EeePC X101CH that the touchpad was uninstalled from (I saw the uninstall dialog boxes open). After a restart there was a PS/2 mouse under View Hidden Devices in Device Manager that wasn't installed properly (I'm assuming that this is the touchpad). Going to the Asus website and downloading the drivers (V15.3.27.1), I get the error message "Synaptics device not found!". I tried the other driver Version v9.1.7.7 for the Sentelic TouchPad as well (when run it appears to be the driver for the finger sensing) and got the error message "This driver version is inapplicable for the touch pad. Please check the devices on the system and install the suitable driver.". What's my next step? Thanks!

    Read the article

  • Authenticate to VM using vagrant up

    - by utrecht
    Authentication failure during Vagrant Up, while vagrant ssh and ssh vagrant@localhost -p2222 works I would like to execute a shell script using Vagrant at boot. Vagrant is unable to Authenticate, while the VM has been started using vagrant up: c:\temp\helloworld>vagrant up Bringing machine 'default' up with 'virtualbox' provider... ==> default: Importing base box 'helloworld'... ==> default: Matching MAC address for NAT networking... ==> default: Setting the name of the VM: helloworld_default_1398419922203_60603 ==> default: Clearing any previously set network interfaces... ==> default: Preparing network interfaces based on configuration... default: Adapter 1: nat ==> default: Forwarding ports... default: 22 => 2222 (adapter 1) ==> default: Booting VM... ==> default: Waiting for machine to boot. This may take a few minutes... default: SSH address: 127.0.0.1:2222 default: SSH username: vagrant default: SSH auth method: private key default: Error: Connection timeout. Retrying... default: Error: Authentication failure. Retrying... default: Error: Authentication failure. Retrying... default: Error: Authentication failure. Retrying... default: Error: Authentication failure. Retrying... ... After executing CTRL + C it is possible to authenticate to the VM using vagrant ssh and ssh vagrant@localhost -p2222 Vagrant file I use the default Vagrantfile and I only changed the hostname: # -*- mode: ruby -*- # vi: set ft=ruby : # Vagrantfile API/syntax version. Don't touch unless you know what you're doing! VAGRANTFILE_API_VERSION = "2" Vagrant.configure(VAGRANTFILE_API_VERSION) do |config| # All Vagrant configuration is done here. The most common configuration # options are documented and commented below. For a complete reference, # please see the online documentation at vagrantup.com. # Every Vagrant virtual environment requires a box to build off of. config.vm.box = "helloworld" ... Vagrant version c:\temp\helloworld>vagrant --version Vagrant 1.5.1 Question How to authenticate to VM using vagrant up?

    Read the article

  • Windows OEM vs retail difference

    - by tjameson
    My laptop has an OEM version of Vista Home Premium 32-bit. I need to reinstall Windows, and I've made sure that disk I have downloaded is the same as the one on my system (32-bit Home Premium). Is the retail version the same as the OEM? I only have a retail copy but I have an OEM license. Will I have any problems reactivating my copy of windows? Note, my HW hasn't changed. Note: I saw this post already, but I don't have an OEM disk: Installing XP with out manufacturers original XP restore disk, possiable with OEM disk?

    Read the article

  • bash starts replacing the characters on the current line insead of moving over to the next line

    - by Lazer
    I use bash shell $ bash --version GNU bash, version 3.2.25(1)-release (x86_64-redhat-linux-gnu) Copyright (C) 2005 Free Software Foundation, Inc. $ Sometimes, when typing a command on the prompt that is pretty lengthy and does not fit in the current line, instead of displaying the extra characters on the next line, bash starts again on the current line.. replacing the characters that were there and making a mess. what should happen : |---------------------------------------------| | $ my big long command takes a lot of argumen| | s and does not fit in a single line | | | |---------------------------------------------| what happens instead : |---------------------------------------------| | s and does not fit in a single linef argumen| | | | | |---------------------------------------------| The issue is intemittent If I resize my shell window to really small width, normal behaviour is restored Does anyone have any idea what is happening here? $ echo $TERM xterm $ echo $PS1 \[\e[30m\][\t]\[\e[0m\]\[\e]0;\w\a\]\[\e[30m\][\W]$ $

    Read the article

  • Reading the *.sqlite files stored in the firefox profile.

    - by celil
    How would one go about reading the data in the *.sqlite files in one's profile? Trying to read them with sqlite3 was unsuccessful. $ sqlite3 SQLite version 3.7.4 Enter ".help" for instructions Enter SQL statements terminated with a ";" sqlite> .load ./downloads.sqlite Error: dlopen(./downloads.sqlite, 10): no suitable image found. Did find: ./downloads.sqlite: unknown file type, first eight bytes: 0x53 0x51 0x4C 0x69 0x74 0x65 0x20 0x66 sqlite> .exit Is this due to Firefox using an older version of sqlite? I am using Firefox v3.6.13

    Read the article

  • How do you disable SMB printing support?

    - by evilpenguin
    Hi, I'm running CentOS on a storage server that has to do file sharing for with Windows machines. SMB version is smbd version 3.5.5-68.fc13 I'm getting a lot of error messages in /var/log/messages regarding failed attempts to connect to a CUPS server. They look like this: Nov 30 18:49:34 big03 smbd[9927]: [2010/11/30 18:49:34.850620, 0] printing/print_cups.c:108(cups_connect) Nov 30 18:49:34 big03 smbd[9927]: Unable to connect to CUPS server localhost:631 - Connection refused I understand that the issue is generated by the fact that SMB comes with printer sharing support, but I'm really not interested in that. I just want to disable the feature to get rid of the messages. Any idea how I can do that?

    Read the article

  • Am I crazy? Demos on jQuery's 'effects' page not working in any browser

    - by Mega Matt
    Hi all, I want to make sure I'm not crazy, because I can't get any of the effects demos to work on jQuery's demo pages. I thought it might be my new Firebug version (1.5.2) or Firefox in general, but they're not working in IE or Chrome either. Here are the links where the demos aren't working. One is for highlight, and the other is for explode. Incidentally, highlight is the one that I'm trying to use. Could it be the new jQuery UI version? Is anyone else having these not work? Effect 1 Effect 2

    Read the article

  • Create 301 Redirection in Amazon Route 53 for Wildcard Subdomains

    - by Eric Yin
    My domain name hosted on Route 53 DNS. Amazon has a guide to do 301 redirection for www. To naked domain by point www. version to a S3 static website with 301 setted up. My question is, how can I have *.domain.com all have 301 redirec to naked domain name. I guess either: Some way to get all wildcard subdomains end up into one S3 bucket, how? Or: Use CloudFront on the www. version S3 site and put wildcard subdomains on the CloudFront, but how? Or: There's some hidden settings just lies on Router 53, then where? Or: use EC2, better not suggest me this, too costing for this task. Please advice.

    Read the article

  • Set up linux box for hosting a-z

    - by microchasm
    I am in the process of reinstalling the OS on a machine that will be used to host a couple of apps for our business. The apps will be local only; access from external clients will be via vpn only. The prior setup used a hosting control panel (Plesk) for most of the admin, and I was looking at using another similar piece of software for the reinstall - but I figured I should finally learn how it all works. I can do most of the things the software would do for me, but am unclear on the symbiosis of it all. This is all an attempt to further distance myself from the land of Configuration Programmer/Programmer, if at all possible. I can't find a full walkthrough anywhere for what I'm looking for, so I thought I'd put up this question, and if people can help me on the way I will edit this with the answers, and document my progress/pitfalls. Hopefully someday this will help someone down the line. The details: CentOS 5.5 x86_64 httpd: Apache/2.2.3 mysql: 5.0.77 (to be upgraded) php: 5.1 (to be upgraded) The requirements: SECURITY!! Secure file transfer Secure client access (SSL Certs and CA) Secure data storage Virtualhosts/multiple subdomains Local email would be nice, but not critical The Steps: Download latest CentOS DVD-iso (torrent worked great for me). Install CentOS: While going through the install, I checked the Server Components option thinking I was going to be using another Plesk-like admin. In hindsight, considering I've decided to try to go my own way, this probably wasn't the best idea. Basic config: Setup users, networking/ip address etc. Yum update/upgrade. Upgrade PHP/MySQL: To upgrade PHP and MySQL to the latest versions, I had to look to another repo outside CentOS. IUS looks great and I'm happy I found it! Add IUS repository to our package manager cd /tmp wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/epel-release-1-1.ius.el5.noarch.rpm rpm -Uvh epel-release-1-1.ius.el5.noarch.rpm wget http://dl.iuscommunity.org/pub/ius/stable/Redhat/5/x86_64/ius-release-1-4.ius.el5.noarch.rpm rpm -Uvh ius-release-1-4.ius.el5.noarch.rpm yum list | grep -w \.ius\. # list all the packages in the IUS repository; use this to find PHP/MySQL version and libraries you want to install Remove old version of PHP and install newer version from IUS rpm -qa | grep php # to list all of the installed php packages we want to remove yum shell # open an interactive yum shell remove php-common php-mysql php-cli #remove installed PHP components install php53 php53-mysql php53-cli php53-common #add packages you want transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell php -v PHP 5.3.2 (cli) (built: Apr 6 2010 18:13:45) Upgrade MySQL from IUS repository /etc/init.d/mysqld stop rpm -qa | grep mysql # to see installed mysql packages yum shell remove mysql mysql-server #remove installed MySQL components install mysql51 mysql51-server mysql51-devel transaction solve #important!! checks for dependencies transaction run #important!! does the actual installation of packages. [control+d] #exit yum shell service mysqld start mysql -v Server version: 5.1.42-ius Distributed by The IUS Community Project Upgrade instructions courtesy of IUS wiki: http://wiki.iuscommunity.org/Doc/ClientUsageGuide Install rssh (restricted shell) to provide scp and sftp access, without allowing ssh login cd /tmp wget http://dag.wieers.com/rpm/packages/rssh/rssh-2.3.2-1.2.el5.rf.x86_64.rpm rpm -ivh rssh-2.3.2-1.2.el5.rf.x86_64.rpm useradd -m -d /home/dev -s /usr/bin/rssh dev passwd dev Edit /etc/rssh.conf to grant access to SFTP to rssh users. vi /etc/rssh.conf Uncomment or add: allowscp allowsftp This allows me to connect to the machine via SFTP protocol in Transmit (my FTP program of choice; I'm sure it's similar with other FTP apps). rssh instructions appropriated (with appreciation!) from http://www.cyberciti.biz/tips/linux-unix-restrict-shell-access-with-rssh.html Set up virtual interfaces ifconfig eth1:1 192.168.1.3 up #start up the virtual interface cd /etc/sysconfig/network-scripts/ cp ifcfg-eth1 ifcfg-eth1:1 #copy default script and match name to our virtual interface vi ifcfg-eth1:1 #modify eth1:1 script #ifcfg-eth1:1 | modify so it looks like this: DEVICE=eth1:1 IPADDR=192.168.1.3 NETMASK=255.255.255.0 NETWORK=192.168.1.0 ONBOOT=yes NAME=eth1:1 Add more Virtual interfaces as needed by repeating. Because of the ONBOOT=yes line in the ifcfg-eth1:1 file, this interface will be brought up when the system boots, or the network starts/restarts. service network restart Shutting down interface eth0: [ OK ] Shutting down interface eth1: [ OK ] Shutting down loopback interface: [ OK ] Bringing up loopback interface: [ OK ] Bringing up interface eth0: [ OK ] Bringing up interface eth1: [ OK ] ping 192.168.1.3 64 bytes from 192.168.1.3: icmp_seq=1 ttl=64 time=0.105 ms And this is where I'm at. I will keep editing this as I make progress. Any tips on how to Configure virtual interfaces/ip based virtual hosts for SSL, setting up a CA, or anything else would be appreciated.

    Read the article

  • Explorer.exe keeps crashing if effects are enabled

    - by Allende
    The explorer.exe keeps crashing before every minute after starts when all the effects are activated. These are the details of the error: Problem signature: Problem Event Name: InPageError Error Status Code: c0000185 Faulting Media Type: 00000003 OS Version: 6.1.7600.2.0.0.256.48 Locale ID: 1033 Additional Information 1: a7aa Additional Information 2: a7aa91f17ea749d42a4de3b390fa5b3d Additional Information 3: a7aa Additional Information 4: a7aa91f17ea749d42a4de3b390fa5b3d Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt I suspect there's a problem with my hard drive ('cause I already have to format/install twice before this error) but not pretty sure why if I disable all the effect (Performance options) help to stop the issue. Anyway if someone have any idea, thanks. I already replace shell32.dll and explorer.exe using the windows 7 dvd Laptop Model: ProBook 4520s Windows Version: Profesional 32 bits. My regards

    Read the article

  • Cropped thumbnails in WordPress

    - by codethief
    Quote from Wordpress' image editor: The thumbnail image can be cropped differently. For example it can be square or contain only a portion of the original image to showcase it better. Here you can select whether to apply changes to all image sizes or make the thumbnail different. This is exactly what I'd like to do, except for the fact that I don't want Wordpress to scale it down to 150x150 pixels (or another predefined resolution). I'd just like to display a cropped (and therefore smaller) version of the picture which is then linked to the (uncropped) original. I also tried to set the thumbnails' width and height to 0 in the preferences. Then, however, I don't even get the chance to assign a cropped version as thumbnail in the editor. Could you tell me how to achieve that? Or isn't it possible at all?

    Read the article

  • How to troubleshoot a service failure?

    - by AngryHacker
    I get a GPF dialog box out of the blue fairly often (like about 2 hours after I turn on the computer). It basically says that svchost.exe had a failure... (see the corresponding Event Log entry below). Event Type: Error Event Source: Application Error Event Category: (100) Event ID: 1000 Date: 5/18/2010 Time: 7:41:16 PM User: N/A Computer: DKHA-IPSA Description: Faulting application svchost.exe, version 5.1.2600.5512, faulting module ole32.dll, version 5.1.2600.5512, fault address 0x0004eaa9. Shortly after this error pops up, the computer pretty much grinds to a halt (e.g. some UI elements on the desktop simply do not respond). And I have to do a hard reboot. How do I troubleshoot this type of thing? P.S. The PC has all the latest patches and nothing is missing in the Device Manager.

    Read the article

  • vnc connection from linux to windows ce

    - by JosiP
    Im having troubles while im trying to connect from linux to Windows CE, via VNC viewer. Here is what i can see on log: /usr/bin/vncviewer 10.1.1.57 VNC Viewer Free Edition 4.1.2 for X - built Apr 20 2011 12:04:25 Copyright (C) 2002-2005 RealVNC Ltd. See http://www.realvnc.com for information on VNC. Tue Jul 2 12:15:04 2013 CConn: connected to host 10.1.1.57 port 5900 CConnection: Server supports RFB protocol version 3.5 CConnection: Using RFB protocol version 3.3 TXImage: Using default colormap and visual, TrueColor, depth 24. CConn: Using pixel format depth 6 (8bpp) rgb222 CConn: Using ZRLE encoding I cannot see anything - only black screen. Restarting device does not help. Device is connected directly to machine by crossed ethernet cable, and its IP is assigned by DHCP. Any clues, ideas, what can i do to get normal view ? best regards J.

    Read the article

  • Why /home folder is missing from my backup archive created by tar?

    - by Konstantin Pereyaslov
    So I'm doing full backup of my VPS using the following command (as root, of course): tar czvf 20120604.tar.gz / Everything seems to be fine, all files seem to appear in the list. The size of archive is 6 Gb and gunzipped version is 11 Gb which includes /home, because I totally have 11 Gb of data on VPS. But when I try actually to unpack archive, or open it using mc or WinRAR, there's no /home folder. And WinRAR tells 20120604.tar.gz - TAR+GZIP archive, unpacked size 894 841 346 bytes. It can't be WinRAR's bug, because when I type tar xzvf 20120604.tar.gz, /home folder isn't unpacked either. Why is /home folder missing from my archive? And what can I do to include it there? tar --version outputs the following: tar (GNU tar) 1.15.1

    Read the article

  • Visual SVN server Running but cannot access / browse repositories

    - by user1783560
    Operating System: Windows Web Server 2008 R2 Visual SVN Version: 2.5.7 Subversion: 1.7.7 Apache: 2.2.22 I freshly installed the Visual SVN latest version on the server and created one repository in it. In the server management window, it shows that the server is up and running but when I try to browse it in a web browser, it doesn't respond. I am not able to import my existing code into the repository: Error: Cannot connect to server open/browse the repository with either command localhost:81/svn OR http://www.myserver.com:81/svn OR http:// myIPAddress:81/svn Visual SVN log is clean. The last information in the server log is that "The server is listening to port 81.

    Read the article

  • Windows 7: Constant BSOD's and Laptop restarts

    - by Rogue
    This is the error that i get on restart: Problem signature: Problem Event Name: BlueScreen OS Version: 6.1.7600.2.0.0.256.1 Locale ID: 16393 Additional information about the problem: BCCode: d1 BCP1: 00000004 BCP2: 00000002 BCP3: 00000000 BCP4: 8B19301D OS Version: 6_1_7600 Service Pack: 0_0 Product: 256_1 Files that help describe the problem: C:\Windows\Minidump\032610-17487-01.dmp C:\Users\ForceOne\AppData\Local\Temp\WER-30591-0.sysdata.xml Read our privacy statement online: http://go.microsoft.com/fwlink/?linkid=104288&clcid=0x0409 If the online privacy statement is not available, please read our privacy statement offline: C:\Windows\system32\en-US\erofflps.txt I'll upload the dump files if anyone wants them, anyone knws the solution to this? Extra Info: I have a Dell Inspiron 1525 with Windows 7

    Read the article

  • PHP Kohana CentOS 5

    - by Undefined
    Trying to deploy a Kohana based project in CentOS 5. Installed PHP 5.3.1 but still getting the following error. Warning: preg_match() [function.preg-match]: Compilation failed: this version of PCRE is not compiled with PCRE_UTF8 support at offset 0 in /usr/local/apache2/htdocs/icarus/system/core/utf8.php on line 30 Fatal error: PCRE has not been compiled with UTF-8 support. See PCRE Pattern Modifiers for more information. This application cannot be run without UTF-8 support. in /usr/local/apache2/htdocs/icarus/system/core/utf8.php on line 38 Trying since last 2 days, i upgraded my PHP from 5.1 to 5.3 but still getting the same error.The problem as per me is that the PCRE module of PHP in phpinfo() says is of sep 2004. Below is the actual line PCRE Library Version 5.0 13-Sep-2004 Can anyone tell me how to upgrade it or wats the solution to the problem. Thanks.

    Read the article

  • ApplicationPool in IIS 7.5 crashes with identifty set to NetworkService

    - by Ravi
    We have a web application running on IIS 7.5 with the identity of the Custom Application Pool set to NetworkService. This was working fine for some days and now the application pool has gone in to a stopped state. The following error message is displayed in the Event Viewer Faulting application name: w3wp.exe, version: 7.5.7600.16385, time stamp: 0x4a5bcd2b Faulting module name: ntdll.dll, version: 6.1.7600.16559, time stamp: 0x4ba9b29c Exception code: 0xc0000005 Fault offset: 0x00038c19 Faulting process id: 0xa28 Faulting application start time: 0x01cbb2e5707aa2b2 Faulting application path: C:\Windows\SysWOW64\inetsrv\w3wp.exe Faulting module path: C:\Windows\SysWOW64\ntdll.dll Report Id: ae3f0610-1ed8-11e0-abf8-000c297f918f We are able to start the application pool only after changing the identity to LocalSystem. Why does the application pool fails to run with identity set to NetworkService. Can any one help us resolving this issue?

    Read the article

< Previous Page | 417 418 419 420 421 422 423 424 425 426 427 428  | Next Page >