Search Results

Search found 20684 results on 828 pages for 'ad hoc network'.

Page 422/828 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• Configuring default gateway returned by dhcp server

  - by comp1mp

  Hello, I have a machine which connects via ethernet to a private LAN, and wireless to a network which provides internet connectivity. The private LAN uses a wireless router to perform DHCP. The problem is that the wireless and NIC adapters have different default gateways. The default gateway for the private LAN has a lower adapter metric, and is thus chosen by the routing algorithm. I am thus unable to browse the internet when connected to both adapters. The following link has a solution for manually setting the adapter metric to a high number. http://superuser.com/questions/77822/how-to-tell-windows-7-to-ignore-a-default-gateway I was hoping to find a different solution. Does any one know of a router that allows you to configure its DHCP server to return an empty default gateway? I cannot find such an option for my linksys wrt300n. Configuring a static ip address with no default gateway does work, however I would like to use DHCP if possible. Does anyone know of a different way to specify a default gateway for a windows 7 machine with multiple network adapters without mucking with the adapter metric? Thanks, Matthew

  Read the article

• Domain Trust Issues When Setting Up TFS 2010 on Windows Server 2008 R2

  - by Chris Reynolds

  I am trying to setup Team Foundation Server 2010 on Windows Server 2008 R2 using a single server configuration. During the "Readiness Checks" phase of the configuration wizard, I am facing an issue that i preventing me from communicating with the domain controller (which is Windows Server 2000). [ System Checks ] TF255435: This computer is a member of an Active Directory domain, but the domain controllers are not accessible. Network problems might be preventing access to the domain. Verify that the network is operational, and then retry the readiness checks. Other options include configuring Team Foundation Server specifying a local account in the custom wizard or joining the computer to a workgroup. http://go.microsoft.com/fwlink/?LinkID=164053&clcid=0x409 After reading the log file, the main issue I am encountering appears to be: The trust relationship between this workstation and the primary domain failed. (type SystemException) I have read in several other locations that the solution to this issue is to: Leave the domain Restart Join a workgroup Restart Rejoin the domain Unfortunately, I have tried this several times now and the issue persists. Is there anything I can try on the either the client machine or the domain controller that may help solve my issue?

  Read the article

• Silent application installation script

  - by Achu

  I use the following script to install application from the server: ECHO OFF IF EXIST "C:\SCRIPTS\drvsw01.cmd" GOTO :L1 C: LABEL System_Drive CD\ MD SCRIPTS COPY U:\Scripts\*.* C:\SCRIPTS\ install.exe -i silent -DLICENSE_ACCEPTED=true -f response_file ECHO "SCRIPTS FOLDER INSTALLATION SUCCESSFUL" :L1 ECHO "JAVA INSTALLATION" U:\Softwares\Java_Run_Time\jre-6u26-windows-i586.exe ECHO "JAVA INSTALLATION SUCCESSFUL" ECHO "OFFICE SOFTWARE INSTALLATION" ECHO "MS OFFICE INSTALLATION" U:\Softwares\Office_2007\setup.exe ECHO "MS-OFFICE INSTALLATION SUCCESSFUL" U:\Softwares\SaveAsPDFandXPS.exe ECHO "MS-OFFICE PDF%XPS Add in INSTALLATION SUCCESSFUL" ECHO "NETWORK SCAN GEAR INSTALLATION" U:\Softwares\ScanGear\english\DISK1\setup.exe ECHO "NETWORK SCAN GEAR INSTALLATION SUCCESSFUL" ECHO "7ZIP INSTALLATION" U:\Softwares\7ZIP\7z457.EXE E CHO "7ZIP INSTALLATION SUCCESSFUL" ECHO "IFAN VIEW INSTALLATION" U:\Softwares\IrfanView_4.5\iview425_setup.exe ECHO "IFAN VIEW INSTALLATION SUCCESSFUL" U:\Softwares\IrfanView\irfanview_plugins_425_setup.exe ECHO "IFAN VIEW PLUGINS INSTALLATION SUCCESSFUL" U:\Softwares\Firefox4\Firefox4.exe ECHO "FIREFOX INSTALLATION SUCCESSFUL" ECHO "FIREFOX PLUGIN INSTALLATION" U:\Softwares\Flash_Player_10\install_flash_player.EXE U:\Softwares\Flash_Player_10\install_flash_player_10_active_x.exe ECHO "FIREFOX INSTALLATION SUCCESSFUL" ECHO "ACROBAT READER 10 INSTALLATION" U:\Softwares\Adobe_Acrobat_Reader_10\AdbeRdr10.exe ECHO "ACROBAT 10 Installation SuccESSFUL" ECHO "INSTALLATION CD burner WINDOWS XP" U:\Softwares\CDburnerxpsetup.exe ECHO "Installation of CD burner Successful" ECHO "INSTALLATION IE8 for WINDOWS XP" U:\SOFTWARE\IE8\IE8-WindowsXP-x86-ENU.exe ECHO "INSTALLATION IE8 SUCCESSFUL" ECHO "THE USER ACCOUNT WOULD BE DELETED" NET USER USER /DELETE ECHO "USER ACCOUNT DELETE SUCCESSFUL" echo %ERRORLEVEL% Now, i want to make this script installing everything silently except MS-Office. Ms-Office b/c i have to customize installing only word, excel & powerpoint. How can i make this script silent? or are there a nice script for this? Thanks,

  Read the article

• Get-ADGroupMember returns nothing while being completed successfully

  - by Volodymyr

  I've tried to list all of the members of one of the groups in AD, but nothing is returned, although the command is completed successfully. It neither works with group DN specified, instead of sAMAccountName. Get-ADGroupMember "sAMAccountName" -Recursive | select name See output below: The following message appears if one views Members from dsa.msc --------------------------- Active Directory Domain Services --------------------------- Some of the object names cannot be shown in their user-friendly form. This can happen if the object is from an external domain and that domain is not available to translate the object's name. --------------------------- OK --------------------------- Can this be a reason for powershell not returning results? Any thoughts? UPD: this doesn't seem to be permissions issue, since dsquery does return group members.

  Read the article

• IIS Permissions or NTFS Permissions?

  - by Jason

  I currently have a Windows Server 2003 setup to serve multiple sites via IIS. One of our directories needs to allow access to only 1 specific AD Security Group. I know there are two ways to accomplish this. One is using IIS to add permissions and the other is to set permissions on the folder/directory itself. A script runs at night and populates the content so users only need read permissions to view it in a browser. My question is which one is preferred?

  Read the article

• reverse proxy on PFsense, squid or otherwise

  - by Mustafa Ismail Mustafa

  I've been trying to get this to work for days now and its not working. After bashing my head against the desk enough times, I've decided to man up and ask. I'm desperately trying to set up a reverse proxy on the pfsense box itself. One because its a pretty powerful box and its not being utilized to the maximum at all and two because I don't have any spare machines to setup squid (or any other reverse proxy [capable]) server on. So, on pfsense, everytime I set up rules (on ServicesProxy ServerGeneral) as so: acl surveillance dstdomain surveillance.myweb.local; acl camera dstdomain camera.myweb.local; http_access allow surveillance AND camera (ad nauseum) when I check the services, squid stops and refuses to restart until I remove them pesky acls that are supposed to make my life easier! What am I doing wrong? How can I get it to work? Is there another way/package I can use? Thanks

  Read the article

• OpenSolaris / Nexenta problems with NetXen 4-port NIC card (ntxn driver)

  - by ewwhite

  Hello, I'm running NexentaStor Enterprise on an HP ProLiant DL180 G6 server. The onboard NIC interfaces surface as igb0 and igb1 and work well. However, I've added an HP NC375T 4-port network card using the NetXen 3031 chipset. This card should be handled by the ntxn driver in the SUNWntxn package, but that results in "ntxn0: failed to map doorbell" messages upon boot. The network interfaces don't show up. After some research, I found HP's driver package for the card. The release notes for the driver package state: This version of the Driver is supported only on Oracle Solaris 10 5/09 & 10/09. Oracle Solaris 10 5/09 & 10/09 contain an older version of NetXen P3 driver package called SUNWntxn. So, adding another version of NetXen P3 driver package using pkgadd command might result in conflicts with the NetXen driver binary & related files. Users are advised to uninstall native SUNWntxn driver package before installing the new package. The install completes, but I end up with a different set of errors in initializing the card. ifconfig ntxn0 plumb ifconfig: cannot open link "ntxn0": DLPI link does not exist dmesg output: Jan 29 07:20:17 ch-san2 ntxn: [ID 977263 kern.warning] WARNING: Memory not available Jan 29 07:20:17 ch-san2 ntxn: [ID 404858 kern.notice] NOTICE: ntxn0: Mac registration error Trying to manually create the device files: root@ch-san2:/volumes# add_drv -i "4040,100" ntxn ("ntxn") already in use as a driver or alias. Update the driver: root@ch-san2:/volumes# update_drv -f ntxn devfsadm: driver failed to attach: ntxn Warning: Driver (ntxn) successfully added to system but failed to attach Any ideas on how to get this driver working, or should I ditch the card and go with an Intel or something else?

  Read the article

• VirtualBox Issue: virtualbox changed my Computer Name's ip address in Windows

  - by suud

  I had installed virtualbox 4.2.2 in Windows 7. My Computer Name is: MY-PC My IP address (using ipconfig /all command) is: 192.168.1.101 My IP is dynamic and I set DNS to google dns (8.8.8.8) When I ping MY-PC, I got this result: Pinging MY-PC [192.168.56.1] with 32 bytes of data: Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 Reply from 192.168.56.1: bytes=32 time<1ms TTL=128 My virtualbox was not running and I expected the ip adress of MY-PC is 192.168.1.101, not 192.168.56.1 Then I run command: nbtstat -a MY-PC and I got this result: VirtualBox Host-Only Network: Node IpAddress: [192.168.56.1] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 08-00-27-00-60-B3 Local Area Connection: Node IpAddress: [0.0.0.0] Scope Id: [] Host not found. Wireless Network Connection: Node IpAddress: [192.168.1.101] Scope Id: [] NetBIOS Remote Machine Name Table Name Type Status --------------------------------------------- MY-PC <00> UNIQUE Registered WORKGROUP <00> GROUP Registered MY-PC <20> UNIQUE Registered MAC Address = 94-0C-6D-E5-6D-5D So it seems virtualbox caused this problem. I want to know how to change back my Computer Name's ip address to 192.168.1.101 (or any ip address that set by my internet connection)?

  Read the article

• SATA-II motherboard and drives but only connected at SATA-I

  - by Shevek

  I have an Abit AB9 QuadGT motherboard which has a SATA-II controller. Connected to it I have a Kingston SSDNow V Series 64GB as boot drive and a Seagate Barracuda 7200.10 as a data drive. I also have 2 x Optiarc AD-7170S DVD burners attached by SATA. Both SSD and HDD are SATA-II and the optical drives are SATA-I. I have just run CrystalDiskInfo and this is reporting that both SSD and HDD are connected at SATA-I (1.5 Gbps), not SATA-II (3.0 Gbps). I have the BIOS set up to use SATA drives in IDE mode. So a few questions: Is CrystalDiskInfo reporting correctly? Are the optical drives causing the SSD & HDD to connect at the slower rate? Is there any setting to force the SSD & HDD to use SATA-II? I'm running Windows 7 Ultimate.

  Read the article

• Remote desktop is slow when connecting to a computer which is part of a domain

  - by Peuge

  Hey all, We have two windows 2003 machines, one is a DC and another is joined to the domain of the DC. These machines are not locally available to us so we have to remote desktop into them. When we first got the machines remote desktop was blazing as the machines are only a couple of miles away. I then installed AD and setup routing and remote access, I also setup DNS on the DC. Now when I try remote Desktop into the machine which is part of the domain (not the DC) it is painfully slow! Remote Desktop onto the DC is also noticeably slower! Another problem is that our FTP to the DC has also become slow. I don't know what other information I can provide, as I am new to Sys Admin (moving over from development). The speed should be fast as these machines are only a couple of miles away. Any help / suggestions is greatly appreciated! Thanks Peuge

  Read the article

• Samba: share home directories when home directories are symbolic links

  - by Owen

  I have set up a new Ubuntu 9.10 system for five users. In the system is a large LVM volume where all the data is to be kept. The main system disk is not for this purpose, so I attempted to move the home directories using usermod -d /var/data/username -m And started creating my shares for these new home locations. But then I thought: hey, Samba has built-in home directory sharing! So I enabled that, and it didn't work. The shares were not published to the network. Only the share for user 'owen' was published; his folder hadn't been moved. So I thought: maybe Samba home sharing only works for default home locations, so how about I move the home directories back to where they were, and then make them symlinks. root@boxenmkiv:/home# ls -l total 4 lrwxrwxrwx 1 brett brett 25 2010-04-03 08:48 brett -> /var/data/brett/ lrwxrwxrwx 1 carly carly 23 2010-04-03 08:48 carly -> /var/data/carly/ lrwxrwxrwx 1 dave dave 21 2010-04-03 08:48 dave -> /var/data/dave/ lrwxrwxrwx 1 kate kate 23 2010-04-03 08:47 kate -> /var/data/kate/ drwxr-xr-x 4 owen owen 4096 2010-04-03 08:44 owen Like so. Still no go. The only users share which is published to the network is 'owen' who as you can see above has not had his home directory moved. I have also added the following to my smb.conf [global] follow symlinks = yes wide symlinks = yes unix extensions = no With no luck. Am I going about doing this the entirely wrong way? Should I just give up and manually create shares for the users? Thanks in advance.

  Read the article

• ubuntu 9.10 cups server cupsd.conf

  - by aaron

  i have a cups server running on ubuntu 9.10 on my home network. right now i can access it at 192.168.1.101:631, but when i try to access it at myservername.local:631 i get a 400 Bad Request. here's the relevant section from my current cupsd.conf: ServerName 192.168.1.101 # Only listen for connections from the local machine. Listen localhost:631 Listen /var/run/cups/cups.sock # any of the below 'Listen' directives all yield the same result Listen 192.168.1.101:631 #Listen *:631 #Listen myservername.local:631 # Show shared printers on the local network. Browsing On BrowseOrder allow,deny BrowseAllow all BrowseLocalProtocols CUPS dnssd BrowseAddress 192.168.1.255 # Default authentication type, when authentication is required... DefaultAuthType Basic # Restrict access to the server... <Location /> Order deny,allow Deny from All Allow from 127.0.0.1 Allow from 192.168.1.* </Location> # Restrict access to the admin pages... <Location /admin> Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> # Restrict access to configuration files... <Location /admin/conf> AuthType Default Require user @SYSTEM Order deny,allow Deny from All #Allow from 127.0.0.1 #Allow from 192.168.1.* </Location> i get the following in /var/log/cups/error_log: E [03/Jan/2010:18:33:41 -0600] Request from "192.168.1.100" using invalid Host: field "myservername.local:631" what do i need to do to be able to access the cups server at both 192.168.1.101:631 and myservername.local:631?

  Read the article

• Cisco ASA Act as a Hardware Security Module?

  - by Derek

  Hello, We have a partner that is requiring us to get a HSM for a web application that we host for them. This is something new for us, we've always installed our SSL certificates on our web servers and never needed a hardware device. We currently have 2 Cisco ASA 5510 firewalls in an active/standby configuration. Both ASAs have a ASA-SSM-10 security module installed in them. The web application is a standard HTTPS webpage with no authentication required. I was wondering if we could use our Cisco ASAs to meet this requirement or if we'll have to buy another device. I was doing some searching and read about Cisco's clientless webvpn feature. It sounds like it might work, but I'm not sure. We basically want the ASA to handle the SSL and proxy the connection to our web servers. We do not want to prompt for a username or password to connect or show any portals, just display the web page. If the ASA cannot do this, does any one have any recommendations for network attached hardware security modules? We are using VMware vCenter, so we'd rather have an external device attached to the network, rather than buying HSM cards for every ESXi host. Thanks, Derek

  Read the article

• AirPort Express Discoverability

  - by andybjackson

  I bought an AirPort Express to enable music in a different part of a friend's house using the AirTunes feature. Unfortunately, iTunes or the AirPort Utility don't reliably discover the existence of the device. If I use the "Configure Other..." function within the AirPort Utility and enter the AirPort Express' IP address and password, then I can reliably get access in a daughter window to configure it. This seems to nudge the underlying AirPort Utility into "finding" and displaying the AirPort Express, which it doesn't do on its own even after clicking the "Rescan" button. iTunes then also seems to cotton on to this discovery and present the AiportExpress as an AirTunes option at the bottom right of iTunes. Things then works as we'd like them to. If I close down the AirPort Utility, then iTunes loses the AirPort Express AirTunes speaker, often giving "An unkown error (-15006) occurred while connecting to the remote speaker". Of course, starting the Airport Utility, forcing it to recognise the Airport Express and then starting iTunes, isn't the ease of use I was after. Background info: iTunes is running on Windows XP. The AirPort Express is running in wireless client mode (i.e. is connecting to an unsecured wireless network in the house with nothing connected to its ethernet port). The network router is a Swisscom Motorola 3347NWG (with firmware 7.8.5r1). I have already tried: Disabling the Windows XP firewall Updating the AirPort Express firmware, the AirPort Utility and the router firmware Ensuring Wireless privacy and similar potetnially problematic router settings are off Solutions, or even just ideas of other things to try would be gratefully received.

  Read the article

• Move sendmail from Fedora 1 to a different server ( fedora 12)

  - by tanieboy4u

  We have a sendmail server that also works as DHCP, DNS, and a gateway to our ISP. It has three network interfaces, one for our ISP ( static IP) and the other two is for LANS on different subnet. The hardware is quite old and we've been experiencing downtime due to hardware failures, so we have decided to upgrade the hardware and while at it upgrade the linux OS to Fedora 12. Were trying to do this with minimal downtime. We are planning to take these steps. Install New OS (Fedora 12) on the new server with 3 network interfaces. Install DHCP, BIND, Sendmail, SpamAssassin, MailScanner, Dovecot, Squirrelmail on the new server. Transfer settings from the old server to the new server. ( This is the hardest part that we know). For DHCP and DNS, we can just copy the dhcp leases and conf file and everything should work right? How do we go about moving the users/email accounts from the old server to the new one? Thanks for all your help!

  Read the article

• Cisco Spam Blocker, Iron Port, Lotus Domino, Integration Help

  - by NickToyota

  Hi serverfault universe, I work for a medium sized (roughly 200 user) company. We are attempting to intagrate our new Cisco Spam Video Blocker (ironport) device into our network so that it acts as an incoming filter then passes it off to our Lotus domino mail server. And also vise versa. The way our network is setup currently has an mx record pointing to our Domino mail SMTP incoming server which is currently setup to be an inbound gateway and filter (using symantec domino mail software). We want to replace the inbound gateway with the ironport. Our company has also invested in a pool of external IP addresses which I believe has been currently assigned to our web, email, servers. What would the proper course of action be to successfully integrate the device be? Mx record change? Replace the domino gateway completely with the ironport? We attempted to set the ironport device to the external IP of what our mx record is pointing to without much success. Any help on proper setup would be greatly appreciated.

  Read the article

• Ubuntu Server running VNC

  - by xwapilot

  I have access to four computers: 1 Ubuntu Server desktop (Version 10.04) 1 Mac Mini (Snow Leopard) 1 Windows desktop (Windows 7) 1 Windows laptop (Windows Vista) The first three will always be on the home network. My goal is to SSH from the laptop into the server and be able, through VNC (or another remote desktop software), to control the windows and mac computers. The goal of this would be a slightly heightened network security over using VNC to directly access the mac or windows desktop. I have successfully used SSH to connect to the server, but have not been able to successfully implement the remote desktop connection. I would appreciate help doing so. Here's what I've done so far: As per instructions here: http://www.stuartellis.eu/articles/vnc-on-linux/ I installed the following: vnc4server – the main VNC server software vnc-java – enables access from Web browsers with Java support xvnc4viewer – a basic VNC viewer I then set up a password using the vncpasswd command. To attempt to connect to the mac, I followed directions I found in a thread at superuser. com and went to "System PreferencesSharing" and enabled "Screen Sharing". Subsequently, I tried entering the following commands into Ubuntu: vncviewer mac_ip_address::5904 vncviewer mac_ip_address:0 vncviewer mac_ip_address:1 They all returned the following: VNC Viewer Free Edition 4.1.1 for X - built Apr 9 2010 18:41:55 Copyright (C) 2002-2005 RealVNC Ltd. See http ://www .realvnc. com for information on VNC. vncviewer: unable to open display "" I'm sure I'm missing something important, but I'm not sure what it is. Do I need to have a GUI installed, or did that come with the vnc packages I installed?

  Read the article

• How to securely enable file sharing over PPTP on Windows 2008 Server

  - by Damage

  I have set up a Windows SBS 2003 domain (LAN) and a stand-alone Windows 2008 Server (web server) at another location (workgroup). I established PPTP VPN connection (SBS dials web server) over which users from LAN should be able to access web server. On web server I enabled TCP/IPv4 and File and Printer sharing protocol. It has a few external addresses (one of them is default) AND one local address (192.x.x.x) assigned to network adapter. Firewall allows port 445 for file sharing. There's the problem - I can not enable web server file shares to be visible to LAN users and ONLY to LAN users: From SBS I can access webserver but I cannot access webserver from LAN workstations (XP, Vista). I have had same configuration - I have just replaced old (web server) Windows 2003 server with 2008 so SBS settings are the same (static route, DNS etc.). How can I enable file sharing on web server for LAN workstations? Now I have opened File and printer sharing to the internet which is of course totaly unsecure. I tried to secure the tunnel so I moved RAS (VPN) connection (Network Center) on web server to "Private" profile and moved firewall port 445 to "Private" profile but suddenly file sharing does not work and I cannot telnet webserver on port 445. How can I secure file sharing so I do not have to open it to the internet?

  Read the article

• VLAN support on Juniper EX - 2200 switches

  - by liv2hak

  I have 6 Juniper switches (EX - 2200) connected to each other as shown in the network topology below. I have two PC's that I am using PC1 - (used for configuring the 6 switches via minicom) PC2 - to monitor the traffic between the switches via the Ports that are marked with arrows in the diagram. STEP 1: I create a new vlan On Switch 3 (SW3) that includes Port 12 and Port 22. I also assign l3-interface to the vlan (vlan_2) with ip address - 192.168.1.7. Now I plug-in Port 0 of Switch 3 on PC2. Now I try pinging 192.168.1.7 from PC2 (192.168.1.10) I want to know what will happen? My postulation is that I will not be able to ping SW3 from PC2.This is because SW3 (Port 12 and Port 22) is a part of a vlan_2 and vlan_2 logically breaks up broadcast domains and so 192.168.1.7 will not be reachable from 192.168.1.10. Now I have an l3-interface on SW1 with IP 192.168.1.1 using default vlan( vlan-id 0). Similarly I have enabled IP on SW2 - 192.168.1.2 SW3 - 192.168.1.3 SW4 - 192.168.1.4 SW5 - 192.168.1.5 SW6 - 192.168.1.6 all using default vlan. Now I plug in Port 12 of SW3 (blue cable) into the PC2. I try to ping 192.168.1.1 from PC2. What will happen at this stage.? My postulation is that I will be able to ping switch 1.Is this correct? Also another question is that can a single port on a Switch be added multiple VLANS? I am a beginner at network configuration? Any help would be highly appreciated. (Please ignore the CISCO symbol on the switches in the diagram.All swithes are Junper EX 22-00.)

  Read the article

• Reverse proxy for mailserver (SMTP + HTTP for web client)

  - by gaqzi

  I'm looking at doing some reverse proxy work for a mail server with corresponding web client. Both servers are running on the same machine, this is not a server with a high load. :) The solution I've discussed with friends is having the mail server/web client on our internal network. Then to put a reverse proxy on the DMZ to service both SMTP and web client HTTP-traffic to the mail server on the internal network. From what I understand this is the recommended secure solution? So far I've thought for the SMTP-proxy part of using postfix which will receive mail, do some spamhause and similar anti-spam measures and if it all checks out, send the mail to the mail server on the inside. The mail server on the inside will send all outgoing mail to the proxy which will then send it out on the Internet. For the web client I'm not sure exactly which software I should be running on the proxy machine, I've been thinking about using Squid -- but that's basically based on the fact that I know squid is a http proxy. The web client data will be sent out over SSL. Reading around some here on Serverfault I've seen other people using Apache with mod_proxy+mod_security for similar situations. Am I thinking correctly for this solution? What software would you guys use and with which modules? Thanks in advance for the help! :)

  Read the article

• How do i remove a password expiration policy?

  - by jimmygee

  We had a password expiration policy recently removed from our AD but some users continued to get the "..your password will expire in x days. would you like to change it now?" message. So we added a reverse/undo policy to correct the local registry settings Maximum password age = 0 days Minimum password age = 0 days This hasn't worked as new users still seem to encounter the above "change password" message sporadically. We have now removed all custom password policy GPOs and are left with the "Default Domain Policy". Still no good. Can someone point me in the direction to fix this? And an explanation into what i was doing wrong (/how password expiration policies apply) would be useful too. thanks Environment is 2k3 server with mostly XPsp2 clients.

  Read the article

• Lock down a site using Forms Auth in IIS7 with Windows Auth

  - by Josh

  I have an ASP.NET MVC 1.0 application that uses Forms Authentication. We are using Windows Server 2008. I need to lock down the site so that only certain users (in AD Groups) can access the site. Unfortunately, though, when I set the site to not allow anon users and use windows authentication, due to the integration of the site and IIS, it shows the user as signed in as their domain account, instead of allowing them to sign in through Forms Auth. So, I need a mixed mode authentication. I need the site to be only accessible through windows auth, without anon users, but once you are in, it needs to use forms auth only. How would I go about doing this the right way?

  Read the article

• Dell Management Packs in System Center Operations Manager 2007 R2?

  - by bwerks

  Hey all, I recently set up SCOM in a small business network environment. The root management server is a Dell Poweredge 2950, and I'd like to use SCOM to monitor it using Dell's management packs. I've imported the management packs into the SCOM deployment and followed Dell's installation instructions, but it doesn't seem to be fully working yet. Currently, the Diagram views in the Dell tree (Monitoring tab) seem to show me the server's place in the network topology, so it seems that at least part of it is working. However, none of the reports under "Performance and Power Monitoring Views" provide any information. When clicking on one of them (Power Consumption (Watts), for instance), the display area is blank and there is a tooltip visible that reads "No performance counter is selected. To select a counter, place a check mark in the Show column in legend below." However, in the legend, there's nothing there for me to check. I've installed OpenManage 6.2 on the server as per the Dell documentation, but I don't know what else I could have done that I missed. Does this sound like a familiar problem to anyone?

  Read the article

• Cisco ASA intermittently fails to see traffic

  - by DrStalker

  users | Mikrotik -- Internet | ASA | ServerA and ServerB I'm trying to troubleshoot a problem with a new Cisco ASA 5505. The network design is as above - the Microtik is the existing router, ServerA and ServerB used to plug directly into it. ServerA has IP 10.30.1.10, ServerB has IP 10.30.1.11 The ASA is configured with no NAT, a "allow anything" firewall, and uses the microtik as its default gateway. In effect, it is currently a simple IP router; the firewall and VPN stuff will all come later once the basics are working. Th problem is access to ServerA and ServerB is erratic - sometimes it will work, sometimes it will fail. It can fail for either one of the servers only, or both. When it is working: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show the incoming connections. When it is failing: The Mikrotik logs show ping packets being sent out over the proper interface The ASA logs show nothing reaching the ASA. This can fail for one server only (e.g.: the Mikrotik is putting out packets to 10.30.1.10 and 10.30.1.11, but the ASA is only seeing packets arrive destined for 10.30.1.11) It can fail for one source only (e.g.: ClientA on the users network can ping 10.30.1.11, but clientB cannot) The problem can also be seen from the mikrotik router itself; sometimes it can ping ServerA and ServerB, sometimes it can only ping one of them What could be causing this? I can't think of any possible cause that is intermittent and could explain why the problem may occur for one destination server and not others. edit: Link to ASA config

  Read the article

• Printer sharing problem (win7 / WinXP): Canon pixma USB printer

  - by Rabarberski

  For a friend, I am trying to share a USB Canon pixma ip3000 printer between two computers in his home network. But I can't get it to work due tot a Canon driver problem. The printer is connected to the Windows 7 (64 bit) computer, and we would like to be able to print from a Windows XP computer. 'Normally' it should be no problem to use Windows printer sharing, however, because one machine is 32-bit and the other is 64-bit, installing an extra driver is required. T he driver provided by canon (here) is described as a 'Canon Inkjet Printer Driver Add-On Module'. The problem is that the .inf file contained in the .exe file isn't accepted as a driver when prompted by the Printer Sharing Wizard, I suspect because it is an add-on driver (whatever that may be). I've connected and installed the printer locally on the XP machine first (which works), so that the XP machine would already know the driver when using it as a network printer, but that doesn't work; the wizard still wants a driver file. Anybody suggestions how to get this working? Maybe there is some sort of generic driver (would be OK even with limited functionality)?

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >