Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 422/676 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• My Portable Hard Drive with USB3 didn't work when connected to My Laptop, but it working with USB2 properly

  - by Mohammad Hasan Esfahanian

  I have Western Digital My Passport Essential Portable Hard Drive with USB3 and Model:WDBACY5000ABK-EESN. Until about two or three months ago when I connected that to My Laptop USB3 port, that worked very well. But now when I'm connecting that to My device, The system does not detect any Hard Drives. When plug in the USB2 port is working properly. I connected that to another Laptop whit USB3 port but I had the same problem. I tested My Laptop port with a Flash Memory by USB3 and ports were healthy and I'm sure they are working. For this issue, I changed the windows, but it still did not work. What can I do? Thanks in advance.

  Read the article

• Audio problems with asus notebook with Bluetooth and usb devices in win 7

  - by QuickSilver

  My notebook is Asus P53E - core i5 Windows 7 installed Audio from PC speakers and headphone is distorted when i turn on bluetooth or some usb device plugged in. I belive this is a software issue. I tried updating my audio drivers but nothing help. Any help will be appreciated. Update: After a few days digging I found that this problem is causing by the asus sound enhancement application SonicFocus. The distortion stops while turning off sonic focus. Can anyone help me with a solution other than turning off SonicFocus

  Read the article

• How do I connect a laptop running Windows 7 to an Android phone using WiFi Direct?

  - by user130768

  From where I am sitting, Windows 7 does not appear to support WiFi Direct connections to Android mobile devices. Specifically, turning on WiFi Direct on my Samsung Galaxy S II does not make the device visible as a potential WiFi network connection. Windows 8 is said to support WiFi Direct, but I have no desire to upgrade at this time. I have successfully set up ad hoc WiFi connections between the S II and my laptop before, but as you may be aware, these are not the same as WiFi Direct. Before posting this question, I searched [ "Windows 7" "WiFi Direct" ] and variations thereof, and dutifully slogged through dozens of lame or irrelevant responses on various forums, badly made YouTube videos, and probable Trojan horse distribution sites. If someone out there knows how to do this, it's buried in the noise.

  Read the article

• Backup tape compression

  - by pufferfish

  What things should I check to confirm that compression is actually happening on our tape backup system? Although the tapes are marked as 200G/520G (native/compressed) capacity, they seem to fill up before the 200G mark (some less than 100G). I'm using - Sony AIT-4 tape autochanger - Sony SDX4-200C (AIT-4) tapes - Ubuntu Lucid - Bacula I've tried checking hardware compression with: tapeinfo -f /dev/nst0, which gives Product Type: Tape Drive Vendor ID: 'SONY ' Product ID: 'SDX-900V ' Revision: '0102' Attached Changer API: No SerialNumber: '0001000036' MinBlock: 2 MaxBlock: 8388608 SCSI ID: 1 SCSI LUN: 0 Ready: yes BufferedMode: yes Medium Type: Not Loaded Density Code: 0x33 BlockSize: 0 DataCompEnabled: yes DataCompCapable: yes DataDeCompEnabled: yes CompType: 0x3 DeCompType: 0x3 BOP: yes Block Position: 0 Partition 0 Remaining Kbytes: 201778000 Partition 0 Size in Kbytes: 201779000 ActivePartition: 0 EarlyWarningSize: 0 NumPartitions: 0 MaxPartitions: 0 ... so I presume it's on. Notes: The Bacula documentation says hardware compression needs to be enable with "system tools such as mt"

  Read the article

• Ubuntu on Oracle VirtualBox: Shared folders

  - by Rosarch

  I looked at this question, but it didn't help. I'm running Windows 7 as a host with Ubuntu 10.10 as a guest with VBox 4.0. I want to have a shared directory between the two. I have installed Guest Additions. I went to the VBox control panel in Windows, added a Shared Folder (sharename Shared_Folder), and chose "Auto Mount". A directory named "sf_Shared_Folder" appeared in /media on Ubuntu, but when I put files in that directory from an OS, I can't see them on the other one. I then tried to create a directory without automounting (sharename collectivefiles), and to run the following command: foo@foo-VirtualBox:~$ sudo mount -t vboxsf collectivefiles FileShare /sbin/mount.vboxsf: mounting failed with the error: No such device What is causing this error? I rebooted both the VM and VBox itself, but I'm still observing this.

  Read the article

• Does PCI bus really occupy 1.8GB

  - by Neil

  I am using a Dell Vostro 1700 laptop which currently has 2GB of RAM. I was considering buying some more memory to upgrade it to 4GB. I am running 32 bit Windows Vista and I know that there can be issues that prevent it from making use of a full 4GB which I believe relate to the fact that memory mapped devices, e.g. graphics card, also need to be allocated addresses in the 4GB range addressable with 32 bits. Consequently I was looking at device manager - resources by connection - memory to see what devices where allocated what memory addresses. I was surprised to see that there was an entry for [80000000 - F3FFFFFF] PCI bus. That is a 1.8GB range of addresses. When I expanded it the only thing in it was [E0000000 - EFFFFFFF] NVIDIA GeForce 8600M GT which is only 256MB. So my question is does the PCI bus really occupy 1.8GB of address space and will it prevent my computer from making use of any more memory than it already has.

  Read the article

• How can I send raw postscript to a remote printer via CUPS?

  - by Ash

  I have an ancient fax device with a printer interface that only accepts postscript level 1 documents formatted in a specific way. I only have access to this printer over the lpd:// protocol. I have some old documents from our previous system that work fine on our Unix machines, but they are altered somehow by CUPS when I use lp on our Linux system. The PDF files that end up in the print queue are significantly modified versions of the original, and although they still render in ghostscript, they don't do anything on the printer. I'm wondering if there's a way to tell CUPS "don't process this, just send it to the printer without modification", or whether there's a lpd client or procedure I could try?

  Read the article

• Any way to release focus on a KVM guest in virt-manager without having to click Ctrl_L + Alt_L?

  - by slm

  Is there a way to move my mouse in and out of a KVM guest in virt-manager without having to click to gain focus of the window and release focus by pressing Ctrl_L + Alt_L? EDIT #1 The guest VM is Win2008R2. I've tried this on a CentOS 5, 6, and Fedora 14 box running various versions of virt-manager and KVM and they all exhibit this behavior. EDIT #2 I just tried the solution recommended by @tpow and that appears to be the issue. Manually adding a tablet input device resolves the problem and I can now move the mouse in and out of the KVM guest without having to gain focus first.

  Read the article

• Network Role based routing

  - by Steve Butler

  Apologies my networking skills are a tad rusty. I'm looking for a way to setup a system that gives me the ability to setup Role-based access to specific network resources. For example, i have three private subnets for specific groups, users will need access to one one or more subnets. I'd like to have all client machines on the same subnet/vlan, and then use 802.1x to authorize into a router(NAC device/whatever), the router would then see what user had authenticated(huge plus if it could determine AD group), and then allow routing to one or more of the three private subnets based upon their group membership. I've looked at packetFence, and it appears to work by assigning a client to a VLAN, but i'd still need a way to route some users into different back-end networks.

  Read the article

• cdrom drive doesn't work on laptop

  - by bozdoz

  Here's as best as I can describe it: When starting up, the boot order doesn't recognize the cdrom drive, but I can open and close the drive during this time. In Windows 7, I can't open the cdrom drive, and it doesn't recognize it in device manager, disk management, or my computer. In Ubuntu Linux, I can open the cdrom drive, but it still doesn't recognize the cds, and it won't mount. If I reformat everything, would my cdrom drive work again? Can I reinstall Windows without a cdrom drive? I've deleted the upper and lower filters as was suggested in Google searches. Took the disk drive out and checked that it was installed correctly (no reason it shouldn't have been). Still: nothing works.

  Read the article

• Software RAID 1 broken, how do I fix this?

  - by Edward

  I'm running CentOS 6 x86_64. There is a software RAID 1 being used on the two internal 80GB drives. I got the following e-mail sent to me: A DegradedArray event had been detected on md device /dev/md1. Faithfully yours, etc. P.S. The /proc/mdstat file currently contains the following: Personalities : [raid1] md0 : active raid1 sda1[0] 511988 blocks super 1.0 [2/1] [U_] md1 : active raid1 sda2[0] 8190968 blocks super 1.1 [2/1] [U_] bitmap: 1/1 pages [4KB], 65536KB chunk md4 : active raid1 sdc1[0] sdb1[1] 1953512400 blocks super 1.2 [2/2] [UU] md3 : active raid1 sdd5[1] sda5[0] 61224892 blocks super 1.1 [2/2] [UU] bitmap: 1/1 pages [4KB], 65536KB chunk md2 : active raid1 sdd3[1] sda3[0] 8190968 blocks super 1.1 [2/2] [UU] unused devices: <none> The system appears to have booted fine and is working. The two drives' content did not change at all. I only removed and reinstalled them while I was booted on the CentOS Live DVD. How do I get the array working again?

  Read the article

• How do I bridge a connection from Wi-Fi to TAP on Mac OS X? (for the emulator QEMU)

  - by penx

  I'm trying to setup a bridge between my Wi-Fi connection and an emulator (QEMU). I need a virtual machine to be on the same LAN as the host, with its own IP address. QEMU requires using a TAP (virtual network device) so I have installed tuntaposx, have it running, and can open up QEMU using a TAP: qemu-system-arm -kernel zImage.integrator -initrd arm_root.img -m 256 -net nic -net tap,ifname=tap1 -nographic -append "console=ttyAMA0" I have a script that configures the bridge once QEMU has opened up the TAP interface: sysctl -w net.link.ether.inet.proxyall=1 sysctl -w net.inet.ip.forwarding=1 sysctl -w net.inet.ip.fw.enable=1 ifconfig bridge0 create ifconfig bridge0 addm en1 ifconfig tap1 0.0.0.0 up ifconfig bridge0 addm tap1 ifconfig bridge0 up If I manually set an IP on the VM, I can ping from the VM to the host, but not from the host to the VM. Also, I can't access the rest of the network from the VM - including not being able to set an IP over DHCP. Any ideas?

  Read the article

• Disable OS X Portable Home Directories for specific hosts for all users, not just individuals?

  - by Paul Nendick

  Would it be possible to block any and all Portable Home Directory services for specific hosts? Something like MCX's "MobileAccountNeverAsk-" but for the whole workstation? We have a network with both portable and stationary machines. I'd like our users to be able to use all machines, going portable on the MacBook but not being bothering with syncing when logged into stationary iMacs or Mac Pros. The Open Directory servers are running Snow Leopard (for now) and all clients are running Lion. Thanks! Paul

  Read the article

• RocketRaid gives me stuttering computer

  - by Dan

  I have a SANS DIGITAL TowerRAID TR8M-BP (with the RocketRaid 622 raid device) with 5 x SAMSUNG Spinpoint F4 HD204UI 2TB 5400 RPM SATA 3.0Gb/s harddrives in a raid 5. It connects via 2-esata cables. My drivers are up to date. When I'm writing data to the drives my computer stutters (meaning freezes for a 1/2 second every 2 seconds or so). My screen freezes, my music goes into a loop, its really annoying. I get the same thing in windows 7 as I do in linux. The only difference is it seems to happen less in linux, but occassionally linux will crash (I've never had linux crash for any other reason, so I'm assuming they have poor linux drivers and kernal mod). Any tips for how to deal with this? Thanks

  Read the article

• how to clone a physical "individual partition" vmdk into a "local" (file-based) vmdk?

  - by BJH

  Hello. I have a physical disk with a small (60GB) partition containing my guest OS. The physical disk also contains a large (240GB) block of unpartitioned space. My vmdk is defined as a physical "individual partition". I want to convert the source physical "individual partition" vmdk into a local (file-based) vmdk. The command - vmware-vdiskmanager -r sourcevmdk targetvmdk -t 2 creates a 300GB vmdk that includes both the desired 60GB "individual partition" and the 240GB of useless unpartitioned space ! How can I create a local vmdk with just the individual partition?

  Read the article

• Setting up WiFi extenders... is it possible to daisy-chain them?

  - by Bigbio2002

  At a location with limited cabling, I've had to set up WiFi signal extenders to cover the whole area. Here is a crude diagram... Internet - WiFi/Gateway - Extender 1 - Extender 2 | | PC (ethernet) WiFi device I was able to successfully daisy-chain three together, and I can access the internet from WiFi devices connected to the farthest extender. Is this a supported configuration? If not, what kind of issues can arise from it? The reason why I ask is that the PC keeps reporting IP address conflicts, and I'm wondering if that's caused because of the way this is configured. Additionally, I noticed that the extenders named their own SSID similar to the one they are connected to, but with a suffix. Would there be any issue in naming them all with the same SSID, to enable seamless roaming as you would with multiple standalone APs?

  Read the article

• Can't set up Usermin correctly to allow users to login outside of local network, what am I missing?

  - by thecraic

  I'm fairly new at creating a server, but the biggest problem I am currently having at the moment is getting Usermin set up to be accessible from outside the LAN. I talked to other people that use it and was told that all I need to do is type the url:20000 to access the login screen, but that doesn't work. I have also tried the ip:20000 and that doesn't lead to anything. Instead I get the error message: Error - Bad Request This web server is running in SSL mode. Try the URL https://hostname:10000/ instead. (where hostname is my server's hostname) I know it must be a configuration issue, but I have checked all my settings and as far as I can tell I don't have the ports blocked anywhere. I have the correct ports forwarded on my router and my server firewall doesn't have the port block either. Is there anything I am missing? Any help would be appreciated and I will add more information upon request. Thank You.

  Read the article

• solving network connection problem on xp

  - by doug

  Hi there I feel so stupid, because I have to fix my dad computer(which was mine years ago). So it is an old computer on which I have installed windows xp and the drivers for main-board. The device manager says that I have no more problems with the hardware. That computer has to connect to a router from my room but it doesn't. On ping 192.168.2.1 I get "Request time out"., The other computers are connecting to that router. Only the old computer doesn't connect to the LAN and later to the internet. Also it doesn't get a good IP(from the same class). After running ipconfig command I know that i have an IP with 169.... What can I do? Do you have any tips for me?

  Read the article

• Error while mounting home directory on different logical volume

  - by RCola

  I created RAID 5 form 3 hard drives. Formatted as ext4 this raid array. Created VG0 group and lv_home logical volume in LVM. Then I tried to mount default /home directory on lv_home, while trying to mount logical volume lv_home to folder containing user profiles /home, getting error: mount: wrong fs type, bad option, bad superblock on /dev/mapper/VG0-lv_home next is seems to be symbolic link: # file -s /dev/VG0/lv_home /dev/VG0/lv_home: symbolic link to `../mapper/VG0-lv_home' then # file -s /dev/mapper/VG0-lv_home /dev/mapper/VG0-lv_home: data and lvm> pvs PV VG Fmt Attr PSize PFree /dev/md0 VG0 lvm2 a- 2.02g 68.00m lvm> lvdisplay --- Logical volume --- LV Name /dev/VG0/lv_home VG Name VG0 LV UUID WzJus7-2yV8-yhog-Ju1b-TpWH-IIAI-LIutwe LV Write Access read/write LV Status available # open 0 LV Size 1.17 GiB Current LE 300 Segments 1 Allocation inherit Read ahead sectors auto - currently set to 256 Block device 251:0

  Read the article

• Raid system fails to boot after moving from 2.6 kernel to 3.5

  - by user846226

  I'm running Gentoo Linux with a custom compiled kernel and I've just migrated from a 2.6 kernel to a 3.5. As my HD's are on RAID 0 mode I use a custom initrd file in order to be able to boot. While kernel 2.6 is able to boot without problems the new 3.5 compiled kernel fails to boot complaining about no block devices found. After taking a look at initrd.cpio contained scripts I can see the failure message is given by mdadm tool. Does anyone has a clue about that? Edit: this morning i noticed there was some kind of issue on my old initrd which works fine for 2.6 kernels, so created a new initrd which works fine and let me to boot into GNU/Gentoo Linux with same 3.5 bzImage. It could be an issue of mdadm, gonna check it. https://bugs.gentoo.org/show_bug.cgi?id=416081

  Read the article

• Session cach and tmp folder error on cPanel Centos

  - by Danialzo

  One of my clients has come across multiple breakdowns in their websites with the following error PHP Code: Warning: session_start() [function.session-start]:open(/tmp/sess_1d6616afe1b8a0d91a8d9ec29254b453, O_RDWR) failed: No space left on device (28) in /home/***/public_html/system/library/session.php on line 11Warning: session_start() [function.session-start]: Cannot send session cookie - headers already sent by (output started at /home/***/public_html/index.php:104) in /home/***/public_html/system/library/session.php on line 11Warning: session_start() [function.session-start]: Cannot send session cache limiter - headers already sent (output started at /home/***/public_html/index.php:104) in /home/***/public_html/system/library/session.php on line 11Warning: Cannot modify header information - headers already sent by (output started at /home/***/public_html/index.php:104) in /home/***/public_html/index.php on line 177Warning: Cannot modify header information - headers already sent by (output started at /home/***/public_html/index.php:104) in /home/***/public_html/system/library/currency.php on line 45&#65279;Notice: Error: Can't create/write to file '/tmp/#sql_4c5_0.MYI' (Errcode: 28) Error No: 1 They are experiencing this problem while: Nothing has been recently changed on the server tmp and other folders are occupied with not more than 10% of their total space The error come and goes I would really appreciate it if anyone could guide me through. Thanks in advance

  Read the article

• Is there a way to share a scanner with an Airport Extreme?

  - by Electrons_Ahoy

  I've got an Airport Extreme as my home network's router. (Sidebar: I love it.) The printer sharing is pretty phenomenal - I've got my printer hooked up to the base station and all the machines in the house can print to it just fine. However, I have one of those combined scanner/printers, and nothing on the lan seems to be able to see the scanner. Is there a way to get the Airport Extreme / Bonjour to also share the scanner half of the device? For the record, this is an all Windows LAN, so I'm using Bonjour for Windows to get the print sharing to work. Also, I'm hoping to not add a whole stack of extra software to the ecosystem - only one machine in the house needs the scanner, so I can just plug the printer back into that machine and share the printer that way. Still, the Airport and Bonjour seem fancy enough that this seems like it should be doable.

  Read the article

• Home Directory Folders

  - by George

  I am looking for a way to acomplish the following: Currently users have home drives mapped via AD profile as follow: \\fileserver\users\username However if once a user was able to access \\fileserver\users and view everyones folder, but had no access to them. This is not ideal since we have people saving important stuff to on their drives. How can I restrict users permissions and views only to THEIR home drives? I also saw this solution, but not sure if it would apply to me: ================================================================================ Share level permissions - Everyone full permission and remove all others On the file/folder level set the following: Authenticated users special permissions on the root of the \\server\homeshare\ to Check the boxes next to the following: Traverse folder / execute file List Folder / read data Read attributes Read extended attributes / List item All other boxed leave unchecked and make sure you apply "This Folder Only" Domain Adminsfull rights and apply “this folder, subfolders, and files” This will block the users from accessing other user home directories. When you create the new user and set the home directory it will create the folder for you with the correct permissions.

  Read the article

• How do you synchronise huge sparse files (VM disk images) between machines?

  - by chrisdew

  Is there a command, such as rsync, which can synchronise huge, sparse, files from one linux server to another? It is very important that the destination file remains sparse. It may be longer (but not bigger) than the drive which contains it. Only changed blocks should be sent across the wire. I have tried rsync, but got no joy. groups.google.com/group/mailing.unix.rsync/browse_thread/thread/94f39271980513d3 If I write a programme to do this, am I just reinventing the wheel? http://www.finalcog.com/synchronise-block-devices Thanks, Chris.

  Read the article

• Is it necessary to have firewalls rules between trusted nodes communicating on their backend interfaces?

  - by Tom

  I have 6 nodes that have internet access on eth1 and private access to one another on eth0. Currently I have firewall rules for eth0, for things like memcached and NFS. Is this necessary? It's a real headache as NFS for example communicates on loads of different ports, and I recently introduced glusterfs which needs more still. Is the headache of figuring out what backend ports to unblock worth the security enhancement? I should mention that I will of course still have a firewall rule on eth0 to block servers owned by others in the same datacenter. Thanks

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >