Search Results

Search found 14179 results on 568 pages for 'reportingservices 2008'.

Page 422/568 | < Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >

• What is the advantage of iSCSI over SMB?

  - by sofakng

  At my house I'm running a Hyper-V server with a Windows Server 2008 R2 VM acting as a file server. Files are shared across my network using SMB. (Also, the machine is using a PERC 6/i RAID card but I don't think that's important) I'm thinking about setting up a dedicated SAN (iSCSI) machine and then switching my Hyper-V server to ESXi. What are the advantages of using iSCSI versus SMB? I think I would still need a file server OS (eg. Win 2k8) sharing files via SMB so I'm not sure the end result would be any different than my current setup...

  Read the article

• HP DL370 G6 expansion

  - by user72185

  Hi, we are running a HP DL370 server with 6 x 300 gb disks on RAID 5. Due to a Windows update causing our server to fail recently, we couldn't access the data. I now want to separate the data from the OS (Windows server 2008 r2) so that if anything like that happens again, we can route everyone through a separate server. I have seen these HP storageworks enclosures (msa70) and have a couple of questions: Can I just take out our 2.5 inch 10k SAS drives, install them in the new Storageworks NAS and hey presto we would be up and running? If I wanted to then add another drive (I think there are 25 bays), can I just insert a blank but identical drive and the RAID 5 would dynamically expand to incorporate the new drive. Many thanks Adrian

  Read the article

• Intel Rapid Storage Technology - Raid5 is very slow

  - by Cederstrom

  Hi, I build a computer with a raid5, using the motherboards raid controller (ASUS P7H57D-V EVO - intel Rapid Storage Technology). The read and write are however very slow, when using the raid controller :( - I am using Windows 2008 R2, and when using the windows software raid, it was ok in speed - so there must be an issue with the controller? Im using 6 disks on 2TB each. Do anyone have any idea why its so slow, and how to fix it? I rather not pick the easy solutiuon of "just buy a raid controller" :| If you need more info about my setup, please just ask. Thanks :)

  Read the article

• What Windows licenses are required to run additional terminal service sessions

  - by John P

  We need to build out a server running Windows 2008 R2 Standard that can allow up to 10 simultaneous RDP/Terminal Services connections and I'm a little confused about how the CAL licenses work. From one source I was told I needed 10 "server CALs" and an additional 10 "RDP CALs" (total of 20 CALs). From another, I was told I just needed the 10 "RDP CALs", which implicitly came with the server CAL. The Microsoft licensing website (http://www.microsoft.com/windowsserver2008/en/us/licensing-rds.aspx) seems to support scenario #1, but it is still not real clear what those server CALs are needed for. Also, can we use the 2 "built-in" RDP clients, meaning we only need to purchase 8 CALs to reach a total of 10?

  Read the article

• Backup SQL server db issue: delete old backup files

  - by David.Chu.ca

  I tried to use sqlmaint.exe tool to back up a database on a remote PC. Here is an example of backup: sqlmaint.exe -S remoteSQLServer\SQLInstance -U username -P pwdxxx -D myDB -BkUpMedia DISK -BkUpDB C:\MSSQL_Backups -DelBkUps 3days ... Here I specified to delete backups older than 3 days. However, the job seems not deleting old bak files on the remote PC(where the SQL server sits). The remote PC has Windows 2008 Server. I also set the C:\MSQL_Backups as shared network drive for EnyOne as owner. My understanding is that the job will delete any bak files older than 3 days. Not sure what I missed? By the way, the job runs at a box with SQL server 2005 installed.

  Read the article

• Microsoft CA certificate templates expires sooner than expected

  - by Tim Brigham

  The certificates my Microsoft CA is generating do not match the time period indicated in the template used. How can I resolve this? I recently created a new certificate template for use on my Linux boxes on my Microsoft CA (2008 R2 Enterprise). This template is approved for server and client authentication purposes with a validity period of 10 years - the expected lifetime of our Linux boxes - and the subject name supplied in the request. I have checked both the intermediate and offline CA - both have more than 10 years of life listed. Is there some kind of hard limit I'm hitting here?

  Read the article

• Using Folder Redirection GPO and Offline Files and Folders

  - by user132844

  I want to use Folder Redirection to redirect user's My Documents to a network share. First question is: What is best practices for mapping the drive? Should I use the profile tab in AD with the %username% variable, or a net use logon script, or something else? Second question is: How do I deal with laptops and syncing the network with the local storage? I want to have 2-way syncing so if they manually map their networked home drive and edit it from a different computer, it will sync the newer version to their My Documents folder the next time they connect their normal work computer. I also want to be sure that if they edit a file offline on their laptop while away from the office, that the network version syncs the changes the next time they connect that laptop. Please advise best practices for this scenario in a 2008 R2/Win7 environment. I am also interested in Mac clients for this environment, and while I am very Mac savvy, I would like to hear what others consider to be best practices for Mac network homedirs in a Win environment.

  Read the article

• Exchange 2010 Room Mailbox Calendar Permissions

  - by Brian Mitchell

  Exchange 2010 sp2 Outlook 2007/2010 Server 2008 I have managed to set up several room mailboxes in exchange, people are able to book the rooms and they get a response from the exchange server. this is brilliant. however users are unable to view the calendar of the room mailbox to see what times are available, in a ideal world I would like users to only see if the room is free or not. I dont want users to see the details of the meeting (title, description etc) I have been trying to do this using the following command Add-MailboxFolderPermission -Identity meetingroom -User "Usergroup" -AccessRights AvailabilityOnly -DomainController AD-Server This throws the following error Specified argument was out of the range of valid values. Parameter name: memberRights + CategoryInfo : NotSpecified: (meetingroom:MailboxFolderIdParameter) [Add-MailboxFolderPermission], Argum entOutOfRangeException + FullyQualifiedErrorId : CBC6516F,Microsoft.Exchange.Management.StoreTasks.AddMailboxFolderPermission Any help on the situation would be brilliant, i have been trying to get this done for a couple of days and im going around in circles.

  Read the article

• High disk time on sql-server

  - by Patrik

  Hi We have a dedicated sql-server 2008 r2 enterprise edition. The setup is: D: (data files) - stored on local ssd disks (not the same disks as log files) (raid 10) E: (log files) - stored on local ssd disks (not the same disks as data files) (raid 1) F: (transaction log backup) - stored remote on a SAN Today we moved our log files to new disks (from F: to E:). From a shared volume ( F:(SAN)) to dedicated local disks (E:). What then happend was that the "disk time", "avg. transfer time" and "avg disk write queue length" increased on the volume where we have the data files (D:) (not on the volume where the log files are located). The data volume and log volume does not share disks, however they share the same controller card. "Disk idle time" is low for all volumes. One thought is ofcourse that the controller card might be overloaded. But, we need more ideas on where the problem might be.

  Read the article

• Download databasename.bak file

  - by Jordon

  I have downloaded databasename.bak file from my hosting company, when i tried to restore that DB file in SQL server 2008 it is keep on giving me following error. The media family on device 'C:\go4sharepoint_1384_8481.bak' is incorrectly formed. SQL Server cannot process this media family. RESTORE HEADERONLY is terminating abnormally. (Microsoft SQL Server, Error: 3241) According to this error and from following link http://www.sqlcoffee.com/Troubleshooting047.htm It is clear that either file i am downloading is corrupt or it is getting corrupted on the way? Any idea, why I am keep on receiving this error? I tried almost all ways but unable to fix this problem, please help me.

  Read the article

• MLGPO for Windows Server 2003 R2?

  - by 5graeham5

  Is there something like MLGPO (Multiple Local Group Policy Objects) for Windows Server 2003 R2? I have a 2003 Terminal Server that isn't part of a domain/AD and I'm trying to set local group policies which applies only to certain users and/or groups and the policies differ between those entities. I wanted to avoid using the file permissions trick for on C:\WINDOWS\system32\GroupPolicy as that's an all-or-nothing approach. I can't upgrade this box to Windows Server 2008 as the software used is only supported and only works on 2003. Are there any third-party tools to achieve this?

  Read the article

• how to separate a network for traffic

  - by Student_CVO

  At the moment our all computers in one big LAN, it is the intention to separate the admin and edu (it's in a school) especially for traffic and less for security. How do this best? I have a drawing, but can't post it (a can send it in a mail) Firewall?, VLAN?, IPCop (no two green zones)?, pfsense? ... Should there be two scopes on the dhcp server (WIN 2008 R2), one for admin and one for edu or is one scope enough? I would like your advice, I am a student in training with this task as a project. Thanks

  Read the article

• Want 2 external monitors with a 13' MacBook - is this possible?

  - by kevinburke

  I've got a 13' white MacBook from 2008 and I'd like to run one or two external monitors, my budget is $500. I've tried to do research and this is what I was going to get - will these work OK? Two Diamond BVU195 HD USB Display Adapters (DVI and VGA with included DVI to VGA adapter) to plug into the USB port Two Dell ST2310 monitors One external USB hub so I don't use up both of my USB ports Will this work? I've read some people say it does and some people say it doesn't, but I don't know enough to say either way. Also do you have recommendations for a better monitor than the dell sd2310? what's the best setup I can buy for $500? Thanks very much for your help, Kevin

  Read the article

• Accessing network resources via vpn connection failes

  - by LikeHoo

  I already found some information on this problem here, but I still can't get it to work. Im trying to access some network resources on my server via vpn over the net. Im using a win7 home pc here and a win server 2008 rc2 with installed ras&routing role on the server. For vpn authentication I use a local user on the server with vpn-access. This user also has the rights to access to the network resources, but it neither finds the server under network nor is it able to connect the network drives... In similar topics here I found out that using the same credentials for vpn-authentication and network resources access does not work, but using different user for access didn't work either. All of these examples I found were in an active directory structure, but I don't have an active directory here. Does anyone know how to solve this problem without having to use an active directory? Thanks

  Read the article

• When send a meeting invite to a specific user, you get a undeliverable response back from another us

  - by jherlitz

  We have a user, where it doesn't matter who sends it, but if you send her a meeting invite through outlook (exchange 2007), you get a non-deliverable message back from another user. Same one all the time though. I checked her shared calendar properties and removed the user from the list. I checked and made sure she wasn't using cache mode. I checked the manage full permissions and send permissions within exchange and the user is not listed. What am I missing? Notes: Using Outlook 2007 with Exchange 2007 on a XP box and Server 2008.

  Read the article

• graph performance monitor windows and linux

  - by Patrik

  We are using Munin to get graphs of our servers. (such as CPU load, I/O, available disk space, etc. ) Munin gives us last 24h, last 7 days, last month and last year. The good thing with Munin is that it supports all kinds of clients, such as Windows, Linux and switches because it can monitor over SNMP. However, we have a problem with the Munin client for Windows. Since we upgraded to Windows Server 2008 R2 it won't show graphs for some performance counters. What options are there out there? Both free and commercial.

  Read the article

• Web Farm Framework - Missing IIS features

  - by Buginator

  I'm trying to install a web farm using Microsoft's Web Farm Framework 2.2. The server is Windows 2008 R2 with IIS 7.5. I followed a tutorial. Installed WFF from Web Platform Installer. However, I'm missing some key features in the "Server Farm" panel in IIS. This is how my setup looks like However, just like in the tutorial, I want it like this How can I enable ALL the things, like Load Balancer, Health Test, Server Affinity etc? Thanks. The tutorial I used was this: weblogs.asp.net/scottgu/archive/2010/09/08/introducing-the-microsoft-web-farm-framework.aspx

  Read the article

• Can only access asp.net app on localhost

  - by Kevin Donn

  I'm trying to get an asp.net application up on IIS on a Windows Server 2008 machine. I can hit the app from localhost, no problem. But I can't access the app using the server's domain name either locally or from another machine on the network. But here's the odd part. I can access a normal file on IIS using the domain name, both from a browser running on the server and from a browser running on another machine on the network. Here's a synopsis ("http" converted to "htp" below because I don't have enough points to have all these links in my message): From IE on the server itself: works htp://localhost/foo.htm works htp://localhost/App works htp://test.foo.com/foo.htm dead htp://test.foo.com/App From IE on another machine (inside or outside my subnet): works htp://test.foo.com/foo.htm dead htp://test.foo.com/App And when I say "dead" I mean the request times out. Any ideas?

  Read the article

• Backups of Exchange 2007 SP3 using VSS are abnormally large

  - by Stew

  I have recently implemented Veeam backup and recovery 6.0, and have noted when backing up my exchange server via incremental updates, it is transferring way more data than expected. Backup is incremental, and setup to use VSS. VSS is stable and healthy, according to vssadmin. Exchange 2007 SP3 running on Windows Server 2008 R2, just last weekend I installed the latest Rollup for Exchange. I thought the nightly incrementals were large, but perhaps my users really are sending that much mail so I tested taking one incremental backup, waiting 10 minutes and taking a second. The second incremental backup transfered 5.8GB of data. We as an organization are absolutely NOT putting 5.8GB of data on the mail server every 10 minutes. Are there any other veeam users who have seen something similar? Is my test faulted? Are there other considerations for VSS?

  Read the article

• How do I set up a one way trust when some DCs are firewalled off from each other?

  - by makerofthings7

  I have two Windows 2008 forests in Win2003 mode and I need to set up a one way trust between them. The validation button in Domains And Trusts works in one forest but not in the other. I think this is because not all DCs can see all the other DCs. I'm not sure if I need to set up the hosts file, so I did so with company.com in the respective domain along with the relevant DC. (do I need _msdcs _tcp zones etc) How do I set up a one way trust when some DCs are firewalled off from each other?

  Read the article

• Connecting to SQL Server on Parallels Desktop with PHP

  - by Zen Savona

  well I recently bought a Mac and am using it as my primary computer. Because I am required to work with MSSQL via PHP, I have installed Parallels Desktop and run Server 2008 R2 on it. I am using the same mixed mode authentication which I previously had on windows. When I attempt to connect to the server with PHP using either a new test file or my old code, it just doesn't find the server. I have tried running PHP on the XP install with parallels, and using the hostname as COMPUTERNAME\SQLEXPRESS, LOCALIP\SQLEXPRESS localhost localip etc, PHP never finds the server. Also note that I can connect to the database server using Management Studio without problems, so SQL Server is running. Please note that both PHP and MSSQL are running within the virtualised environment. Any contribution is appreciated

  Read the article

• how to copy sql server database on same server

  - by Sam

  I've got a SQL Server 2008 and want to make a copy of a database so I've got a 2nd Version of the database for testing on the same server. The database copy wizard is not able to copy the database, it always sends funny error Messages about missing objects (using SMO copy). When I try to make a backup and restore it under a different database name it still keeps the file names of the original database and overrides this (crashing the original database). So how do I copy a SQL database? Shutdown SQL Server, copy the physical files and attach them? Maybe a command line tool for database copy? Shouldn't there be an easy way to make a copy?

  Read the article

• One EC2 source with distributed varnish machines

  - by Elad Lachmi

  I have a web site hosted in an EC2 instance (2008 r2 + iis7.5 + sql server). I put one linux box running RHEL with varnish. After some configuration trail and error, I found a configuration that works. Now I want to duplicate the varnish boxes to other availability zones, but continue to pull the pages from the original windows box. It is my understanding that I can put the varnish boxes in different zones and pull from the windows box via it's external IP. But what do I need to do in order for each user to receive content from the box physically closest to them? Is this even possible? Thank you!

  Read the article

• Instructions to setup domain controller

  - by Robert Koritnik

  Where could I get best step by step instructions (with some simple explanations) how to setup domain controller on Windows Server 2008 R2 Server Core? I don't know what do I need? Do I need DNS as well and AD and so on and so forth. I don't know enough about these things, but I need to set them up to prepare development environment. I would also like to know how to configure firewall on DC machine, to make it visible on other machines because I've setup DC somehow but I can't connect to it... This is my HW config: Linksys internet router with DHCP my dev machine is Windows 7 my DC machine is a VM in my dev machine my dev machine has a network adapter to linksys and a virtual adapter to DC DC machine has two network adapters: one to linksys (to be inetrnet connected) and one to host (my dev Win7 machine)

  Read the article

• RewriteRule Works With "Match Everything" Pattern But Not Directory Pattern

  - by kgrote

  I'm trying to redirect newsletter URLs from my local server to an Amazon S3 bucket. So I want to redirect from: https://mysite.com/assets/img/newsletter/Jan12_Newsletter.html to: https://s3.amazonaws.com/mybucket/newsletters/legacy/Jan12_Newsletter.html Here's the first part of my rule: RewriteEngine On RewriteBase / # Is it in the newsletters directory RewriteCond %{REQUEST_URI} ^(/assets/img/newsletter/)(.+) [NC] # Is not a 2008-2011 newsletter RewriteCond %{REQUEST_URI} !(.+)(11|10|09|08)_Newsletter.html$ [NC] ## -> RewriteRule to S3 Here <- ## If I use this RewriteRule to point to the new subdirectory on S3 it will NOT redirect: RewriteRule ^(/assets/img/newsletter/)(.+) https://s3.amazonaws.com/mybucket/newsletters/legacy/$2 [R=301,L] However if I use a blanket expression to capture the entire file path it WILL redirect: RewriteRule ^(.*)$ https://s3.amazonaws.com/mybucket/newsletters/legacy/$1 [R=301,L] Why does it only work with a "match everything" expression but not a more specific expression?

  Read the article

< Previous Page | 418 419 420 421 422 423 424 425 426 427 428 429  | Next Page >