Search Results

Search found 11767 results on 471 pages for 'org'.

Page 423/471 | < Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >

• Creating a USB stick for installing centos 6.x using DVD1 and DVD2 iso files

  - by user250563

  First, we create 2 partitions on the USB stick that is let's say 16GB. first partition is let's say only 1GB and the second partition is the rest of what is available. after we "w" write the changes, the USB now has 2 partitions. 1 is 1GB 1 is more than 14GB so , we have... sdb1 and sdb2 now. now we need to turn these partitions into filesystems some say i should run these commands after those procedures. mkfs.vfat -F 32 /dev/sdb1 mkfs.ext3 /dev/sdb2 but some web pages recommend using: mkfs.vfat -n BOOT /dev/sdb1 mkfs.ext2 -m 0 -b 4096 -L DATA /dev/sdb2 which is it? so let's say the DVDs are called: CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso so we make a directory: mkdir -p /mnt/dvd1 and then mount it: mount -o loop CentOS-6.4-x86_64-bin-DVD1.iso /mnt/dvd1 and i suppose we don't make a directory for dvd2 and we don't have to mount it ? at this point i do not know what should be done. but i think this step might be next: we make the USB bootable by finding the file named mbr.bin and then moving it to there via these commnad. dd conv=notrunc bs=440 count=1 if=/usr/lib/syslinux/mbr.bin of=/dev/sdb parted /dev/sdb set 1 boot on in other words we are "dd-ing it to 'sdb' not sdb1' or 'sdb2'. and then we use parted to set the boot to on for sdb so far everything looks good? here is the confusing parts.. how exactly do i move these iso files to the usb drive? EVERYTHING BELOW IS A GUESS. so at this point i should copy the folder /mnt/dvd1/isolinux to usb's sdb1 or sdb2 ? rename it to syslinux ? and then inside this syslinux folder there will be a file called... isolinux.cfg ? which should be renamed to syslinux.cfg ? and then copy the contents of /mnt/dvd1/images/* to USB's sdb2 ? but i think i am also suppose to copy and paste the both CentOS-6.4-x86_64-bin-DVD1.iso CentOS-6.4-x86_64-bin-DVD2.iso somewhere into this USB's sdb2 partition, correct ? almost like a drag and drop kind of a thing? or do they go into any folders ? centos' own web site has some instructions but those instructions do not work. http://wiki.centos.org/HowTos/InstallFromUSBkey i once got this working but things got ruined, i have to do it again and this time take notes.

  Read the article

• Postfix: Relay access denied

  - by Joseph Silvashy

  When I telnet to my server thats running postfix and try to send an email: MAIL FROM:<[email protected]> #=> 250 2.1.0 Ok RCPT TO:<[email protected]> #=> 554 5.7.1 <[email protected]>: Relay access denied I couldn't really find the answer on the site or by looking at other users question/answers, I'm not sure where to start. Ideas? Update So basically looking at the docs: http://www.postfix.org/SMTPD_ACCESS_README.html (section: Getting selective with SMTP access restriction lists), I don't seem to have any of those directives in etc/postfix/main.cf like smtpd_client_restrictions = permit_mynetworks, reject or any of the other ones, so I'm quite confused. But really I'm going to have a rails app connect to the server and send the emails, so I'm not sure how to handle it. Here is what my config file looks like: # See /usr/share/postfix/main.cf.dist for a commented, more complete version # Debian specific: Specifying a file name will cause the first # line of that file to be used as the name. The Debian default # is /etc/mailname. #myorigin = /etc/mailname smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no # appending .domain is the MUA's job. append_dot_mydomain = no # Uncomment the next line to generate "delayed mail" warnings #delay_warning_time = 4h readme_directory = no # TLS parameters smtpd_tls_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_key_file=/etc/ssl/private/ssl-cert-snakeoil.key smtpd_use_tls=yes smtpd_tls_session_cache_database = btree:${data_directory}/smtpd_scache smtp_tls_session_cache_database = btree:${data_directory}/smtp_scache # See /usr/share/doc/postfix/TLS_README.gz in the postfix-doc package for # information on enabling SSL in the smtp client. myhostname = rerecipe-utils alias_maps = hash:/etc/aliases alias_database = hash:/etc/aliases myorigin = /etc/mailname mydestination = $myhostname, localhost.$mydomain, localhost, mail.rerecipe.com, rerecipe.com relayhost = mailbox_size_limit = 0 recipient_delimiter = + inet_interfaces = all inet_protocols = all mynetworks = 127.0.0.0/8 204.232.207.0/24 10.177.64.0/19 [::1]/128 [fe80::%eth0]/64 [fe80::%eth1]/64 Something to note is that relayhost is blank, this is the default configuration file that was created when I installed Postfix, when testing to connect with openssl I get this: ~% openssl s_client -connect mail.myhostname.com:25 -starttls smtp CONNECTED(00000003) depth=0 /CN=myhostname verify error:num=18:self signed certificate verify return:1 depth=0 /CN=myhostname verify return:1 --- Certificate chain 0 s:/CN=myhostname i:/CN=myhostname --- Server certificate -----BEGIN CERTIFICATE----- MIIBqTCCARICCQDDxVr+420qvjANBgkqhkiG9w0BAQUFADAZMRcwFQYDVQQDEw5y ZXJlY2lwZS11dGlsczAeFw0xMDEwMTMwNjU1MTVaFw0yMDEwMTAwNjU1MTVaMBkx FzAVBgNVBAMTDnJlcmVjaXBlLXV0aWxzMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQDODh2w4A1k0qiPNPhkrPj8sfkxpKPTk28AuZhgOEBYBLeHacTKNH0jXxPv P3TyhINijvvdDPzyuPJoTTliR2EHR/nL4DLhr5FzhV+PB4PsIFUER7arx+1sMjz6 5l/Ubu1ppMzW9U0IFNbaPm2AiiGBQRCQN8L0bLUjzVzwoSRMOQIDAQABMA0GCSqG SIb3DQEBBQUAA4GBALi2vvk9TGKJubXYJbU0PKmVmsfzFK35yLqr0keiDBhK2Leg 274sWxEH3ds8mUaRftuFlXb7RYAGNlVyTuMTY3CEcnqIsH7F2McCUTpjMzu/o1mZ O/B21CelKetBd1u79Gkrv2vWyN7Csft6uTx5NIGG2+pGi3r0gX2r0Hbu2K94 -----END CERTIFICATE----- subject=/CN=myhostname issuer=/CN=myhostname --- No client certificate CA names sent --- SSL handshake has read 1203 bytes and written 360 bytes --- New, TLSv1/SSLv3, Cipher is DHE-RSA-AES256-SHA Server public key is 1024 bit Compression: NONE Expansion: NONE SSL-Session: Protocol : TLSv1 Cipher : DHE-RSA-AES256-SHA Session-ID: 1AA4B8BFAAA85DA9ED4755194C50311670E57C35B8C51F9C2749936DA11918E4 Session-ID-ctx: Master-Key: 9B432F1DE9F3580DCC6208C76F96631DC5A4BC517BDBADD5F514414DCF34AC526C30687B96C5C4742E9583555A118232 Key-Arg : None Start Time: 1292985376 Timeout : 300 (sec) Verify return code: 18 (self signed certificate) --- 250 DSN Oddly enough when I try to send an email from the machine itself it does work: echo test | mail -s "test subject" [email protected]

  Read the article

• Write STDOUT & STDERR to a logfile, also write STDERR to screen

  - by Stefan Lasiewski

  I would like to run several commands, and capture all output to a logfile. I also want to print any errors to the screen (or optionally mail the output to someone). Here's an example. The following command will run three commands, and will write all output (STDOUT and STDERR) into a single logfile. { command1 && command2 && command3 ; } > logfile.log 2>&1 Here is what I want to do with the output of these commands: STDERR and STDOUT for all commands goes to a logfile, in case I need it later--- I usually won't look in here unless there are problems. Print STDERR to the screen (or optionally, pipe to /bin/mail), so that any error stands out and doesn't get ignored. It would be nice if the return codes were still usable, so that I could do some error handling. Maybe I want to send email if there was an error, like this: { command1 && command2 && command3 ; } logfile.log 2&1 || mailx -s "There was an error" stefanl@example.org The problem I run into is that STDERR loses context during I/O redirection. A '2&1' will convert STDERR into STDOUT, and therefore I cannot view errors if I do 2 error.log Here are a couple juicier examples. Let's pretend that I am running some familiar build commands, but I don't want the entire build to stop just because of one error so I use the '--keep-going' flag. { ./configure && make --keep-going && make install ; } > build.log 2>&1 Or, here's a simple (And perhaps sloppy) build and deploy script, which will keep going in the event of an error. { ./configure && make --keep-going && make install && rsync -av --keep-going /foo devhost:/foo} > build-and-deploy.log 2>&1 I think what I want involves some sort of Bash I/O Redirection, but I can't figure this out.

  Read the article

• Mercurial not receiving push

  - by Jeffrey04

  I have a mercurial web-frontend (hgwebdir.cgi) installed on a server, and an installation of nginx was installed in front of it as a reverse proxy to the web-frontend as my friend suggested. However, whenever a large changeset is pushed (via a script), it would fail. I found an issue ticket @google-code that describe similar problem, and there is a solution that says (#39) So the server side answer is: don't send the 401 back early. Be as slow/dumb as 'hg serve' and make the hg client send the bundle twice. How do I do that? My current nginx config location /repo/testdomain.com { rewrite ^(.*) http://bpj.kkr.gov.my$1/hgwebdir.cgi; } location /repo/testdomain.com/ { rewrite ^(.*) http://bpj.kkr.gov.my$1hgwebdir.cgi; } location /repo/testdomain.com/hgwebdir.cgi { proxy_pass http://localhost:81/repo/testdomain.com/hgwebdir.cgi; proxy_set_header Host $http_host; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_buffering on; client_max_body_size 4096M; proxy_read_timeout 30000; proxy_send_timeout 30000; } From the access log we keep seeing 408 entries incoming.ip.address - - [18/Nov/2009:08:29:31 +0800] "POST /repo/testdomain.com/hgwebdir.cgi/example_repository?cmd=unbundle&heads=73121b2b6159afc47cc3a028060902883d5b1e74 HTTP/1.1" 408 0 "-" "mercurial/proto-1.0" incoming.ip.address - - [18/Nov/2009:08:37:14 +0800] "POST /repo/testdomain.com/hgwebdir.cgi/example_repository?cmd=unbundle&heads=73121b2b6159afc47cc3a028060902883d5b1e74 HTTP/1.1" 408 0 "-" "mercurial/proto-1.0" Is there anything else I can do on the server because solving it on the server side is preferable :/ Further Findings Bitbucket seems to have this solved ( Check liquidhg bitbucket project and the Diagnosis wiki page ) on the server side, can't find the config anywhere though :/ What happens next varies depending on your server. Some servers refuse the BODY, simplying closing the pipe from the client and causing Mercurial to fail. Some, like Apache (at least the way I configure it, and that could be part of the problem) and nginx (they way BitBucket.org configures it), accept the BODY, though it may take a few retries. Bottom line: if Mercurial doesn't fail the push, it sends the changeset data at least once to a server that has already told it it lacks credentials (more on this at Blame). Assuming Mercurial is still running, it resends the "unbundle" request and data, this time with authentication. Finally, Apache accepts the data successfully. Nginx, OTOH, at least under BitBucket's configuration, seems to reassemble the previous body (the one that lacked authentication) and somehow keep Mercurial from re-sending the whole body.

  Read the article

• Ubuntu Server 12.04 CPU Load

  - by zertux

  I have a Server (2x Hexa-Core Xeon E5649 2.53GHz w/HT with 32GB RAM and 20000 GB Bandwidth) running Ubuntu Server 12.04 LTS. The server runs LAMP and serves one website only, the estimated number of users is to be ~ 15,000 at the same time. At the moment i have around 2000 users online each of them runs 50 MySQL queries (small values mostly select and insert) from the beginning until the end of the session. Server CPU Load is high at this number of connections while the RAM usage is almost 1GB out of 32GB its worth mentioning that the server was running very fast with no problems at all but am concerned about the load average. http://s12.postimage.org/z7hi6mz3h/photo.png top - 03:02:43 up 9 min, 2 users, load average: 50.83, 30.14, 12.83 Tasks: 432 total, 1 running, 430 sleeping, 0 stopped, 1 zombie Cpu(s): 0.1%us, 0.2%sy, 0.0%ni, 66.5%id, 33.1%wa, 0.0%hi, 0.0%si, 0.0%st Mem: 32939992k total, 3111604k used, 29828388k free, 84108k buffers Swap: 2048280k total, 0k used, 2048280k free, 1621640k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 2860 root 20 0 25820 2288 1420 S 3 0.0 0:11.18 htop 1182 root 20 0 0 0 0 D 2 0.0 0:01.46 kjournald 1935 mysql 20 0 12.3g 161m 7924 S 1 0.5 102:31.45 mysqld 11 root 20 0 0 0 0 S 0 0.0 0:00.38 kworker/0:1 1822 www-data 20 0 247m 25m 4188 D 0 0.1 0:01.81 apache2 2920 www-data 20 0 0 0 0 Z 0 0.0 0:01.20 apache2 <defunct> 2942 www-data 20 0 247m 23m 3056 D 0 0.1 0:00.20 apache2 3516 www-data 20 0 247m 23m 3028 D 0 0.1 0:00.06 apache2 3521 www-data 20 0 247m 23m 3020 D 0 0.1 0:00.09 apache2 3664 www-data 20 0 247m 23m 3132 D 0 0.1 0:00.09 apache2 3674 www-data 20 0 247m 23m 3252 D 0 0.1 0:00.06 apache2 3713 www-data 20 0 247m 23m 3040 D 0 0.1 0:00.09 apache2 1 root 20 0 24328 2284 1344 S 0 0.0 0:03.09 init 2 root 20 0 0 0 0 S 0 0.0 0:00.00 kthreadd 3 root 20 0 0 0 0 S 0 0.0 0:00.01 ksoftirqd/0 6 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/0 7 root RT 0 0 0 0 S 0 0.0 0:00.00 watchdog/0 8 root RT 0 0 0 0 S 0 0.0 0:00.00 migration/1 9 root 20 0 0 0 0 S 0 0.0 0:00.00 kworker/1:0 root@server:~/codes# vmstat 1 procs -----------memory---------- ---swap-- -----io---- -system-- ----cpu---- r b swpd free buff cache si so bi bo in cs us sy id wa 19 0 0 29684012 86112 1689844 0 0 19 590 254 231 48 0 47 5 23 0 0 29704812 86128 1697672 0 0 4 320 11100 8121 77 1 22 0 33 0 0 29671044 86156 1705308 0 0 0 5440 13190 9140 95 1 4 0 33 3 0 29670088 86160 1706288 0 0 0 32932 12275 7297 99 0 1 0 35 0 0 29693456 86188 1710724 0 0 4 676 12701 7867 98 1 1 0 ^C I have not changed any of the default configurations that comes with Ubuntu. Is this load normal for such powerful server ? is there any optimization i can make to Apache/MySQL to minimize the load ? What do you recommend ?

  Read the article

• 502 Bad Gateway with nginx + apache + subversion + ssl (SVN COPY)

  - by theplatz

  I've asked this on stackoverflow, but it may be better suited for serverfault... I'm having a problem running Apache + Subversion with SSL behind an Nginx proxy and I'm hoping someone might have the answer. I've scoured google for hours looking for the answer to my problem and can't seem to figure it out. What I'm seeing are "502 (Bad Gateway)" errors when trying to MOVE or COPY using subversion; however, checkouts and commits work fine. Here are the relevant parts (I think) of the nginx and apache config files in question: Nginx upstream subversion_hosts { server 127.0.0.1:80; } server { listen x.x.x.x:80; server_name hostname; access_log /srv/log/nginx/http.access_log main; error_log /srv/log/nginx/http.error_log info; # redirect all requests to https rewrite ^/(.*)$ https://hostname/$1 redirect; } # HTTPS server server { listen x.x.x.x:443; server_name hostname; passenger_enabled on; root /path/to/rails/root; access_log /srv/log/nginx/ssl.access_log main; error_log /srv/log/nginx/ssl.error_log info; ssl on; ssl_certificate server.crt; ssl_certificate_key server.key; add_header Front-End-Https on; location /svn { proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; set $fixed_destination $http_destination; if ( $http_destination ~* ^https(.*)$ ) { set $fixed_destination http$1; } proxy_set_header Destination $fixed_destination; proxy_pass http://subversion_hosts; } } Apache Listen 127.0.0.1:80 <VirtualHost *:80> # in order to support COPY and MOVE, etc - over https (443), # ServerName _must_ be the same as the nginx servername # http://trac.edgewall.org/wiki/TracNginxRecipe ServerName hostname UseCanonicalName on <Location /svn> DAV svn SVNParentPath "/srv/svn" Order deny,allow Deny from all Satisfy any # Some config omitted ... </Location> ErrorLog /var/log/apache2/subversion_error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog /var/log/apache2/subversion_access.log combined </VirtualHost> From what I could tell while researching this problem, the server name has to match on both the apache server as well as the nginx server, which I've done. Additionally, this problem seems to stick around even if I change the configuration to use http only.

  Read the article

• Command-line connect to wired network for Ubuntu

  - by Tim

  I like to know how to use command-line to connect to a wired network in general for Ubuntu 8.10? In my case, I connect a cable to my laptop but it doesn't work with my WICD. So I like to try command-line method. Here is the ifconfig of my network adapters: $ ifconfig eth0 Link encap:Ethernet HWaddr 00:c0:9f:8d:23:74 UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Interrupt:19 Base address:0x1800 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:4457 errors:0 dropped:0 overruns:0 frame:0 TX packets:4457 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:493002 (493.0 KB) TX bytes:493002 (493.0 KB) wlan0 Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 RX packets:1508929 errors:0 dropped:0 overruns:0 frame:0 TX packets:768144 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:806027375 (806.0 MB) TX bytes:78834873 (78.8 MB) wlan0:avahi Link encap:Ethernet HWaddr 00:0e:9b:ab:56:19 inet addr:169.254.5.92 Bcast:169.254.255.255 Mask:255.255.0.0 UP BROADCAST NOTRAILERS PROMISC ALLMULTI MTU:576 Metric:1 wmaster0 Link encap:UNSPEC HWaddr 00-0E-9B-AB-56-19-00-00-00-00-00-00-00-00-00-00 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) Thanks and regards! UPDATE: Tried what oyvindio suggested. Here is the failing message: $ sudo dhclient3 eth0 There is already a pid file /var/run/dhclient.pid with pid 18279 killed old client process, removed PID file Internet Systems Consortium DHCP Client V3.1.1 Copyright 2004-2008 Internet Systems Consortium. All rights reserved. For info, please visit http://www.isc.org/sw/dhcp/ mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 mon0: unknown hardware address type 803 wmaster0: unknown hardware address type 801 Listening on LPF/eth0/00:c0:9f:8d:23:74 Sending on LPF/eth0/00:c0:9f:8d:23:74 Sending on Socket/fallback DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 5 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 10 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 12 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 15 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 11 DHCPDISCOVER on eth0 to 255.255.255.255 port 67 interval 8 No DHCPOFFERS received. No working leases in persistent database - sleeping.

  Read the article

• Netcat file transfer problem

  - by thepurplepixel

  I have two custom scripts I just wrote to facilitate transferring files between my VPS and my home server. They are both written in bash (short & sweet): To send: #!/bin/bash SENDFILE=$1 PORT=$2 HOST='<my house>' HOSTIP=`host $HOST | grep "has address" | cut --delimiter=" " -f 4` echo Transferring file \"$SENDFILE\" to $HOST \($HOSTIP\). tar -c "$SENDFILE" | pv -c -N tar -i 0.5 | lzma -z -c -6 | pv -c -N lzma -i 0.5 | nc -q 1 $HOSTIP $PORT echo Done. To receive: #!/bin/bash SERVER='<myserver>' SERVERIP=`host $SERVER | grep "has address" | cut --delimiter=" " -f 4` PORT=$1 echo Receiving file from $SERVER \($SERVERIP\) on port $PORT. nc -l $PORT | pv -c -N netcat -i 0.5 | lzma -d -c | pv -c -N lzma -i 0.5 | tar -xf - echo Done. The problem is that, for a very quick second, I see something flash along the lines of "Connection Refused" (before pv overwrites it), and no file is ever transferred. The port is forwarded through my router, and nmap confirms it: ~$ sudo nmap -sU -PN -p55515 -v <my house> Starting Nmap 5.00 ( http://nmap.org ) at 2010-04-21 18:10 EDT NSE: Loaded 0 scripts for scanning. Initiating Parallel DNS resolution of 1 host. at 18:10 Completed Parallel DNS resolution of 1 host. at 18:10, 0.00s elapsed Initiating UDP Scan at 18:10 Scanning 74.13.25.94 [1 port] Completed UDP Scan at 18:10, 2.02s elapsed (1 total ports) Host 74.13.25.94 is up. Interesting ports on 74.13.25.94: PORT STATE SERVICE 55515/udp open|filtered unknown Read data files from: /usr/share/nmap Nmap done: 1 IP address (1 host up) scanned in 2.08 seconds Raw packets sent: 2 (56B) | Rcvd: 5 (260B) Also, running netcat normally doesn't work either: squircle@summit:~$ netcat <my house> 55515 <my house> [<my IP>] 55515 (?) : Connection refused Both boxes are Ubuntu Karmic (9.10). The receiver has no firewall, and outbound traffic on that port is allowed on the sender. I have no idea what to troubleshoot next. Any ideas? P.S.: Feel free to move this to SO/SF if you feel it would fit better there.

  Read the article

• How do I configure a site in IIS 7 for SSL with a wildcard certificate?

  - by michielvoo

  We have an Windows 2008 server with IIS 7 to test sites we develop for our clients. Each site has a binding on a subdomain: clienta.example.com clientb.example.com clientc.example.com (* Using example.com to protect the innocent) For one of these sites we now have to test if it works over https. So I have created a wildcard certificate request with *.example.com as the common name. I have received the certificate (issued by PositiveSSL SA) and completed the request. The certificate is now installed in IIS. Now I have added an https binding to the second site with the following settings: type: https IP address: All Unassigned Port: 443 Host name: clientb.example.com SSL certificate: *.example.com Browsing the site over regular http works fine. When I try to browse the site over https I get the following errors (depending on the browser used): Chrome This webpage is not available Error 102 (net::ERR_CONNECTION_REFUSED): Unknown error. Firefox Unable to connect Firefox can't establish a connection to the server at clientb.example.com Firebug says Status: Aborted Internet Explorer Internet Explorer cannot display the webpage I have checked Failed Request Tracing, and according to the log the request was completed with status 200. I have run the SSL Diagnostics Tool with the following result: System time: Fri, 04 Mar 2011 14:04:35 GMT Connecting to 192.168.2.95:443 Connected Handshake: 115 bytes sent Handshake: 3877 bytes received Handshake: 326 bytes sent Handshake: 59 bytes received Handshake succeeded Verifying server certificate, it might take a while... Server certificate name: *.example.com Server certificate subject: OU=Domain Control Validated, OU=PositiveSSL Wildcard, CN=*.example.com Server certificate issuer: C=GB, S=Greater Manchester, L=Salford, O=Comodo CA Limited, CN=PositiveSSL CA Server certificate validity: From 2-3-2011 1:00:00 To 2-3-2012 0:59:59 1:00:00 To 2-3-2012 0:59:59 HTTPS request: GET / HTTP/1.0 User-Agent: SSLDiag Accept:*/* HTTPS: 85 bytes of encrypted data sent HTTPS: 533 bytes of encrypted data received Status: HTTP/1.1 404 Not Found HTTP/1.1 404 Not Found Content-Type: text/html; charset=us-ascii Server: Microsoft-HTTPAPI/2.0 Date: Fri, 04 Mar 2011 14:04:35 GMT Connection: close Content-Length: 315 <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.01//EN""http://www.w3.org/TR/html4/strict.dtd"> <HTML><HEAD><TITLE>Not Found</TITLE> <META HTTP-EQUIV="Content-Type" Content="text/html; charset=us-ascii"></HEAD> <BODY><h2>Not Found</h2> <hr><p>HTTP Error 404. The requested resource is not found.</p> </BODY></HTML> HTTPS: server disconnected Final handshake: 37 bytes sent successfully Q: What can I do to make this work?

  Read the article

• how does openvpn decide which interface to get IP addrs from

  - by bkrupa

  Using ubuntu 10.04 on both ends. We have a client and server machine on the SAME network attempting to make a vpn connection. We use the config files from here and made minimal changes. The server and client start and seem to connect without any trouble. The server looks like: Wed Feb 23 22:13:22 2011 MULTI: multi_create_instance called Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Re-using SSL/TLS context Wed Feb 23 22:13:22 2011 192.168.1.55:47166 LZO compression initialized Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel MTU parms [ L:1574 D:138 EF:38 EB:0 ET:0 EL:0 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Local Options hash (VER=V4): 'f7df56b8' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Expected Remote Options hash (VER=V4): 'd79ca330' Wed Feb 23 22:13:22 2011 192.168.1.55:47166 TLS: Initial packet from 192.168.1.55:47166, sid=69112e42 5458135b *...* Wed Feb 23 22:13:22 2011 192.168.1.55:47166 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Feb 23 22:13:22 2011 192.168.1.55:47166 [client1] Peer Connection Initiated with 192.168.1.55:47166 On the client side the connection looks like: Wed Feb 23 22:20:07 2011 [server] Peer Connection Initiated with [AF_INET]192.168.1.41:1194 Wed Feb 23 22:20:10 2011 SENT CONTROL [server]: 'PUSH_REQUEST' (status=1) Wed Feb 23 22:20:10 2011 PUSH: Received control message: 'PUSH_REPLY,route-gateway 10.8.0.4,ping 10,ping-restart 120,ifconfig 10.8.0.50 255.255.255.0' ... Wed Feb 23 22:20:10 2011 /sbin/ifconfig tap0 10.8.0.50 netmask 255.255.255.0 mtu 1500 broadcast 10.8.0.255 Wed Feb 23 22:20:10 2011 Initialization Sequence Completed The openvpn server has been configured to assign ip addresses in the range 10.8.0.* and the client has been given 10.8.0.50. When I run the following nmap from the client: Starting Nmap 5.00 ( http://nmap.org ) at 2011-02-23 22:04 EST Host 10.8.0.50 is up (0.00047s latency). Nmap done: 256 IP addresses (1 host up) scanned in 30.34 seconds Host 192.168.1.1 is up (0.0025s latency). Host 192.168.1.18 is up (0.074s latency). Host 192.168.1.41 is up (0.0024s latency). Host 192.168.1.55 is up (0.00018s latency). Nmap done: 256 IP addresses (4 hosts up) scanned in 6.33 seconds If I run an nmap from the server on 10.8.0.* I get nothing. If the client has two interfaces (wireless and tap device) when you look for a certain ip address, how does it decide which interface to connect on?

  Read the article

• FreeBSD jail with IPFW with loopback - unable to connect loopback interface

  - by khinester

  I am trying to configure a one IP jail with loopback interface, but I am unsure how to configure the IPFW rules to allow traffic to pass between the jail and the network card on the server. I have followed http://blog.burghardt.pl/2009/01/multiple-freebsd-jails-sharing-one-ip-address/ and https://forums.freebsd.org/viewtopic.php?&t=30063 but without success, here is what i have in my ipfw.rules # vim /usr/local/etc/ipfw.rules ext_if="igb0" jail_if="lo666" IP_PUB="192.168.0.2" IP_JAIL_WWW="10.6.6.6" NET_JAIL="10.6.6.0/24" IPF="ipfw -q add" ipfw -q -f flush #loopback $IPF 10 allow all from any to any via lo0 $IPF 20 deny all from any to 127.0.0.0/8 $IPF 30 deny all from 127.0.0.0/8 to any $IPF 40 deny tcp from any to any frag # statefull $IPF 50 check-state $IPF 60 allow tcp from any to any established $IPF 70 allow all from any to any out keep-state $IPF 80 allow icmp from any to any # open port ftp (20,21), ssh (22), mail (25) # ssh (22), , dns (53) etc $IPF 120 allow tcp from any to any 21 out $IPF 130 allow tcp from any to any 22 in $IPF 140 allow tcp from any to any 22 out $IPF 150 allow tcp from any to any 25 in $IPF 160 allow tcp from any to any 25 out $IPF 170 allow udp from any to any 53 in $IPF 175 allow tcp from any to any 53 in $IPF 180 allow udp from any to any 53 out $IPF 185 allow tcp from any to any 53 out # HTTP $IPF 300 skipto 63000 tcp from any to me http,https setup keep-state $IPF 300 skipto 63000 tcp from any to me http,https setup keep-state # deny and log everything $IPF 500 deny log all from any to any # NAT $IPF 63000 divert natd ip from any to any via $jail_if out $IPF 63000 divert natd ip from any to any via $jail_if in but when i create a jail as: # ezjail-admin create -f continental -c zfs node 10.6.6.7 /usr/jails/node/. /usr/jails/node/./etc /usr/jails/node/./etc/resolv.conf /usr/jails/node/./etc/ezjail.flavour.continental /usr/jails/node/./etc/rc.d /usr/jails/node/./etc/rc.conf 4 blocks find: /usr/jails/node/pkg/: No such file or directory Warning: IP 10.6.6.7 not configured on a local interface. Warning: Some services already seem to be listening on all IP, (including 10.6.6.7) This may cause some confusion, here they are: root syslogd 1203 6 udp6 *:514 *:* root syslogd 1203 7 udp4 *:514 *:* i get these warning and then when i go into the jail environment, i am unable to install any ports. any advice much appreciated.

  Read the article

• DELL DRAC & Ubuntu VPN Connection

  - by Mikunos

  I am trying to connect to a DELL DRAC card without success by Ubuntu VPN Connection Manager. I have these data: Protocol: PPTP SERVER IP PPTP: 1233.123.123.123 DRAC IP: 192.168.10.25 Subnet: 255.255.0.0 User: myuser Pass: mypass where have I to write these parameters? I have configured the PPTP connection using the graphical tool in Ubuntu 11.10 ... but in the /var/log/syslog I get these messages: Apr 15 11:33:15 shinet NetworkManager[1035]: <info> Starting VPN service 'pptp'... Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' started (org.freedesktop.NetworkManager.pptp), PID 18180 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN service 'pptp' appeared; activating connections Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN plugin state changed: 3 Apr 15 11:33:15 shinet NetworkManager[1035]: <info> VPN connection 'Connessione VPN 1' (Connect) reply received. Apr 15 11:33:15 shinet pppd[18182]: Plugin /usr/lib/pppd/2.4.5/nm-pptp-pppd-plugin.so loaded. Apr 15 11:33:15 shinet pppd[18182]: pppd 2.4.5 started by root, uid 0 Apr 15 11:33:15 shinet pppd[18182]: Using interface ppp0 Apr 15 11:33:15 shinet pppd[18182]: Connect: ppp0 <--> /dev/pts/1 Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices added (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:15 shinet NetworkManager[1035]: SCPlugin-Ifupdown: device added (path: /sys/devices/virtual/net/ppp0, iface: ppp0): no ifupdown configuration found. Apr 15 11:33:15 shinet pptp[18185]: nm-pptp-service-18180 log[main:pptp.c:314]: The synchronous pptp option is NOT activated Apr 15 11:33:46 shinet pppd[18182]: LCP: timeout sending Config-Requests Apr 15 11:33:46 shinet pppd[18182]: Connection terminated. Apr 15 11:33:46 shinet avahi-daemon[1081]: Withdrawing workstation service for ppp0. Apr 15 11:33:46 shinet NetworkManager[1035]: SCPlugin-Ifupdown: devices removed (path: /sys/devices/virtual/net/ppp0, iface: ppp0) Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:46 shinet pppd[18182]: Modem hangup Apr 15 11:33:46 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet pppd[18182]: Exit. Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> VPN plugin failed: 1 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state changed: 6 Apr 15 11:33:51 shinet NetworkManager[1035]: <info> VPN plugin state change reason: 0 Apr 15 11:33:51 shinet NetworkManager[1035]: <warn> error disconnecting VPN: Could not process the request because no VPN connection was active. Apr 15 11:33:51 shinet NetworkManager[1035]: <info> Policy set 'Wired connection 1' (eth0) as default for IPv4 routing and DNS. Apr 15 11:33:57 shinet NetworkManager[1035]: <info> VPN service 'pptp' disappeared Thanks

  Read the article

• Backing up data stored on Amazon S3

  - by Fiver

  I have an EC2 instance running a web server that stores users' uploaded files to S3. The files are written once and never change, but are retrieved occasionally by the users. We will likely accumulate somewhere around 200-500GB of data per year. We would like to ensure this data is safe, particularly from accidental deletions and would like to be able to restore files that were deleted regardless of the reason. I have read about the versioning feature for S3 buckets, but I cannot seem to find if recovery is possible for files with no modification history. See the AWS docs here on versioning: http://docs.aws.amazon.com/AmazonS3/latest/dev/ObjectVersioning.html In those examples, they don't show the scenario where data is uploaded, but never modified, and then deleted. Are files deleted in this scenario recoverable? Then, we thought we may just backup the S3 files to Glacier using object lifecycle management: http://docs.aws.amazon.com/AmazonS3/latest/dev/object-lifecycle-mgmt.html But, it seems this will not work for us, as the file object is not copied to Glacier but moved to Glacier (more accurately it seems it is an object attribute that is changed, but anyway...). So it seems there is no direct way to backup S3 data, and transferring the data from S3 to local servers may be time-consuming and may incur significant transfer costs over time. Finally, we thought we would create a new bucket every month to serve as a monthly full backup, and copy the original bucket's data to the new one on Day 1. Then using something like duplicity (http://duplicity.nongnu.org/) we would synchronize the backup bucket every night. At the end of the month we would put the backup bucket's contents in Glacier storage, and create a new backup bucket using a new, current copy of the original bucket...and repeat this process. This seems like it would work and minimize the storage / transfer costs, but I'm not sure if duplicity allows bucket-to-bucket transfers directly without bringing data down to the controlling client first. So, I guess there are a couple questions here. First, does S3 versioning allow recovery of files that were never modified? Is there some way to "copy" files from S3 to Glacier that I have missed? Can duplicity or any other tool transfer files between S3 buckets directly to avoid transfer costs? Finally, am I way off the mark in my approach to backing up S3 data? Thanks in advance for any insight you could provide!

  Read the article

• How to start nginx via different port(other than 80)

  - by Zhao Peng

  Hi I am a newbie on nginx, I tried to set it up on my server(running Ubuntu 4), which already has apache running. So after I apt-get install it, I tried to start nginx. Then I get the message like this: Starting nginx: the configuration file /etc/nginx/nginx.conf syntax is ok configuration file /etc/nginx/nginx.conf test is successful [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) [emerg]: bind() to 0.0.0.0:80 failed (98: Address already in use) That makes sense as Apache is using port 80. Then I tried to modify nginx.conf, I reference some articles, so I changed it like so: server { listen 8080; location / { proxy_pass http://94.143.9.34:9500; proxy_set_header Host $host:8080; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Via "nginx"; } After saving this and try to start nginx again, I still get the same error as previously. I cannot really find a related post about this, could any good people shred some light? Thanks in advance :) ========================================================================= I should post all the content in conf here: user www-data; worker_processes 1; error_log /var/log/nginx/error.log; pid /var/run/nginx.pid; events { worker_connections 1024; # multi_accept on; } http { include /etc/nginx/mime.types; access_log /var/log/nginx/access.log; sendfile on; #tcp_nopush on; #keepalive_timeout 0; keepalive_timeout 65; tcp_nodelay on; gzip on; gzip_disable "MSIE [1-6]\.(?!.*SV1)"; include /etc/nginx/conf.d/*.conf; include /etc/nginx/sites-enabled/*; server { listen 81; location / { proxy_pass http://94.143.9.34:9500; proxy_set_header Host $host:81; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header Via "nginx"; } } } mail { See sample authentication script at: http://wiki.nginx.org/NginxImapAuthenticateWithApachePhpScript auth_http localhost/auth.php; pop3_capabilities "TOP" "USER"; imap_capabilities "IMAP4rev1" "UIDPLUS"; server { listen localhost:110; protocol pop3; proxy on; } server { listen localhost:143; protocol imap; proxy on; } } Basically, I changed nothing except adding the server part.

  Read the article

• SSH to an ubuntu machine using avahi

  - by tensaiji

  I have an ubuntu box that I connect to using avahi. Connecting to that box works fine for all services (I regularly use AFP, SSH and SMB on it) but I've noticed that whenever I connect to it from a mac using SSH (and using the ".local" dns name provided by avahi - eg. "ssh .local") SSH tries to connect using ipv6, which for some reason times out (after two minutes) then it tries ipv4 which connects immediately. I'd like to avoid this timeout, as it's really annoying for me and other users - if SSH tried ipv4 first or if ssh over ipv6 worked then that would solve the problem. But so far I've been unable to get either to work (the best I've managed is to specify the "-4" option to SSH to stop it from trying ipv6 at all). I'm using Ubuntu 10.04. Any solution has to be on the server (not the client) as there are multiple clients connecting. A possible complication might be that my LAN is set up to allow link-local ipv6 addresses only, but I have other servers (using Mac OS) that I can SSH into using ipv6) I suspect that the problem could be solved by either preventing avahi from broadcasting the ipv6 address, or by enabling ssh over ipv6, but so far as I can tell avahi is already configured not to broadcast the ipv6 address and sshd is configured to allow ipv6 connections! Here's my /etc/avahi/avahi-daemon.conf (I don't think I've changed anything from the ubuntu defaults) [server] #host-name=foo #domain-name=local #browse-domains=0pointer.de, zeroconf.org use-ipv4=yes use-ipv6=no #allow-interfaces=eth0 #deny-interfaces=eth1 #check-response-ttl=no #use-iff-running=no #enable-dbus=yes #disallow-other-stacks=no #allow-point-to-point=no [wide-area] enable-wide-area=yes [publish] #disable-publishing=no #disable-user-service-publishing=no #add-service-cookie=no #publish-addresses=yes #publish-hinfo=yes #publish-workstation=yes #publish-domain=yes #publish-dns-servers=192.168.50.1, 192.168.50.2 #publish-resolv-conf-dns-servers=yes #publish-aaaa-on-ipv4=yes #publish-a-on-ipv6=no [reflector] #enable-reflector=no #reflect-ipv=no [rlimits] #rlimit-as= rlimit-core=0 rlimit-data=4194304 rlimit-fsize=0 rlimit-nofile=300 rlimit-stack=4194304 rlimit-nproc=3 and here's my sshd_config (mainly updated to only allow pub/private keys): # What ports, IPs and protocols we listen for Port 22 # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel INFO # Authentication: LoginGraceTime 180 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication no AllowGroups sshusers # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding yes X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM yes Does anyone have any ideas that I can try, or has experienced anything similar?

  Read the article

• How Do I Restrict Repository Access via WebSVN?

  - by kaybenleroll

  I have multiple subversion repositories which are served up through Apache 2.2 and WebDAV. They are all located in a central place, and I used this debian-administration.org article as the basis (I dropped the use of the database authentication for a simple htpasswd file though). Since then, I have also started using WebSVN. My issue is that not all users on the system should be able to access the different repositories, and the default setup of WebSVN is to allow anyone who can authenticate. According to the WebSVN documentation, the best way around this is to use subversion's path access system, so I looked to create this, using the AuthzSVNAccessFile directive. When I do this though, I keep getting "403 Forbidden" messages. My files look like the following: I have default policy settings in a file: <Location /svn/> DAV svn SVNParentPath /var/lib/svn/repository Order deny,allow Deny from all </Location> Each repository gets a policy file like below: <Location /svn/sysadmin/> Include /var/lib/svn/conf/default_auth.conf AuthName "Repository for sysadmin" require user joebloggs jimsmith mickmurphy </Location> The default_auth.conf file contains this: SVNParentPath /var/lib/svn/repository AuthType basic AuthUserFile /var/lib/svn/conf/.dav_svn.passwd AuthzSVNAccessFile /var/lib/svn/conf/svnaccess.conf I am not fully sure why I need the second SVNParentPath in default_auth.conf, but I just added that today as I was getting error messages as a result of adding the AuthzSVNAccessFile directive. With a totally permissive access file [/] joebloggs = rw the system worked fine (and was essentially unchanged), but as I soon as I start trying to add any kind of restrictions such as [sysadmin:/] joebloggs = rw instead, I get the 'Permission denied' errors again. The log file entries are: [Thu May 28 10:40:17 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET websvn:/ [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET svn:/sysadmin What do I need to do to get this to work? Have configured apache wrong, or is my understanding of the svnaccess.conf file incorrect? If I am going about this the wrong way, I have no particular attachment to my overall approach, so feel free to offer alternatives as well. UPDATE (20090528-1600): I attempted to implement this answer, but I still cannot get it to work properly. I know most of the configuration is correct, as I have added [/] joebloggs = rw at the start and 'joebloggs' then has all the correct access. When I try to go repository-specific though, doing something like [/] joebloggs = rw [sysadmin:/] mickmurphy = rw then I got a permission denied error for mickmurphy (joebloggs still works), with an error similar to what I already had previously [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'mickmurphy' GET svn:/sysadmin Also, I forgot to explain previously that all my repositories are underneath /var/lib/svn/repository UPDATE (20090529-1245): Still no luck getting this to work, but all the signs seem to be pointing to the issue being with path-access control in subversion not working properly. My assumption is that I have not conf

  Read the article

• rsync -c -i flags identical files as different

  - by Scott

  My goal: given a list of files on local server, show any differences to the files with the same absolute path on remote server; e.g. compare local /etc/init.d/apache to same file on remote server. "Difference" for me means different checksum. I don't care about file modification times. I also do not want to sync the files (yet); only show the diffs. I have rsync 3.0.6 on both local and remote servers, which should be able to do what I want. However, it is claiming that local and remote files, even with identical checksums, are still different. Here's the command line: $ rsync --dry-run -avi --checksum --files-from=/home/me/test.txt --rsync-path="cd / && rsync" / me@remote:/ where: "me" = my username; "remote" = remote server hostname current working directory is '/' test.txt contains one line reading "/etc/init.d/apache" OS: Linux 2.6.9 Running cksum on /etc/init.d/apache on both servers yields the same result. The files are the same. However, rsync output is: me@remote's password: building file list ... done .d..t...... etc/ cd+++++++++ etc/init.d/ <f+++++++++ etc/init.d/apache sent 93 bytes received 21 bytes 20.73 bytes/sec total size is 2374 speedup is 20.82 (DRY RUN) The output codes (see http://www.samba.org/ftp/rsync/rsync.html) mean that rsync thinks /etc is identical except for mod time /etc/init.d needs to be changed /etc/init.d/apache will be sent to the remote server I don't understand how, with --checksum option, and the files having identical checksums, that rsync should think they're different. (I've tried with other files having identical mod times, and those files are not flagged as different.) I did run this in /, and made sure (AFAIK) that it's run remotely in /, so even relative pathnames will still be correct. I ran rsync with -avvvi for more debug info, but saw nothing remarkable. I'm wondering: is rsync still looking at file mod times, even with --checksum? am I somehow not setting up the path(s) right? what am I doing wrong?

  Read the article

• Apache Alias subfolder and starting with dot

  - by MauricioOtta

  I have a multi purpose server running ArchLinux that currently serves multiple virtual hosts from /var/www/domains/EXAMPLE.COM/html /var/www/domains/EXAMPLE2.COM/html I deploy those websites (mostly using Kohana framework) using a Jenkins job by checking out the project, removes the .git folder and ssh-copy the tar.gz to /var/www/domains/ on the server and untars it. Since I don't want to have to re-install phpMyAdmin after each deploy, I decided to use an alias. I would like the alias to be something like /.tools/phpMyAdmin/ so I could have more "tools" later if I wanted to. I have tried just changing the default httpd-phpmyadmin.conf that was installed by following the official WIKI: https://wiki.archlinux.org/index.php/Phpmyadmin Alias /.tools/phpMyAdmin/ "/usr/share/webapps/phpMyAdmin" <Directory "/usr/share/webapps/phpMyAdmin"> AllowOverride All Options FollowSymlinks Order allow,deny Allow from all php_admin_value open_basedir "/var/www/:/tmp/:/usr/share/webapps/:/etc/webapps:/usr/share/pear/" </Directory> Changing only that, doesn't seem to work with my current setup on the server, and apache forwards the request to the framework which 404s (as there's no route to handle /.tools/phpAdmin). I have Mass Virtual hosting enable and setup like this: # # Use name-based virtual hosting. # NameVirtualHost *:8000 # get the server name from the Host: header UseCanonicalName On # splittable logs LogFormat "%{Host}i %h %l %u %t \"%r\" %s %b" vcommon CustomLog logs/access_log vcommon <Directory /var/www/domains> # ExecCGI is needed here because we can't force # CGI execution in the way that ScriptAlias does Options FollowSymLinks ExecCGI AllowOverride All Order allow,deny Allow from all </Directory> RewriteEngine On # a ServerName derived from a Host: header may be any case at all RewriteMap lowercase int:tolower ## deal with normal documents first: # allow Alias /icons/ to work - repeat for other aliases RewriteCond %{REQUEST_URI} !^/icons/ # allow CGIs to work RewriteCond %{REQUEST_URI} !^/cgi-bin/ # do the magic RewriteCond %{SERVER_NAME} ^(www\.|)(.*) RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%2}/html/$1 ## and now deal with CGIs - we have to force a MIME type RewriteCond %{REQUEST_URI} ^/cgi-bin/ RewriteRule ^/(.*)$ /var/www/domains/${lowercase:%{SERVER_NAME}}/cgi-bin/$1 [T=application/x-httpd-cgi] There is also nginx running on this server on port 80 as a reverse proxy for Apache: location ~ \.php$ { proxy_pass http://127.0.0.1:8000; } Everything else was setup by following the official WIKI so I don't think those would cause trouble. Do I need to have the alias for phpMyAdmin setup along the mass virtual hosting or can it be in a separate include file for that alias to work?

  Read the article

• Can't connect to svnserve on localhost - connection actively refused

  - by RMorrisey

  When I try to connect using Tortoise to my SVN server using: svn://localhost/ Tortoise tells me: "Can't connect to host 'localhost'. No connection could be made because the target machine actively refused it." How can I fix this? I am trying to set up a subversion server on my local PC for personal use. I am running Windows Vista, with SlikSVN and TortoiseSVN installed. I previously had everything working correctly, but I found that I couldn't merge(!), apparently due to a version mismatch between the SVN client and server. Anyway... I now have the following setup: I created a repository using svnadmin create; it resides at C:\svnGrove C:\svnGrove\conf\svnserve.conf (# comments omitted): [general] anon-access=read auth-access=write password-db=passwd #authz-db=authz realm=svnGrove C:\svnGrove\conf\passwd: [users] myname=mypass My Subversion Server service is pointed to: C:\Program Files\SlikSvn\bin\svnserve.exe --service -r C:\svnGrove It shows the TCP/IP service as a dependency. I have also tried running svnserve from the command line, with similar results. The below is provided by the 'about' option in TortoiseSVN: TortoiseSVN 1.6.10, Build 19898 - 32 Bit , 2010/07/16 15:46:08 Subversion 1.6.12, apr 1.3.8 apr-utils 1.3.9 neon 0.29.3 OpenSSL 0.9.8o 01 Jun 2010 zlib 1.2.3 The following is from svn --version on the command line (not sure why it says CollabNet, CollabNet was the previous SVN binary that I had set up. The uninstaller failed to remove everything gracefully): svn, version 1.6.12 (SlikSvn/1.6.12) WIN32 compiled Jun 22 2010, 20:45:29 Copyright (C) 2000-2009 CollabNet. Subversion is open source software, see http://subversion.tigris.org/ This product includes software developed by CollabNet (http://www.Collab.Net/). The following repository access (RA) modules are available: * ra_neon : Module for accessing a repository via WebDAV protocol using Neon. - handles 'http' scheme - handles 'https' scheme * ra_svn : Module for accessing a repository using the svn network protocol. - with Cyrus SASL authentication - handles 'svn' scheme * ra_local : Module for accessing a repository on local disk. - handles 'file' scheme * ra_serf : Module for accessing a repository via WebDAV protocol using serf. - handles 'http' scheme - handles 'https' scheme I disabled my Windows Firewall and CA Internet Security, without success in resolving the issue. Edit The old version of svnserve was still set up as a service after the uninstall, pointed to this path: C:\Program Files\Subversion\svn-win32-1.4.6\bin I edited the registry key for the service to point to the new path (shown above). Whether I run svnserve as a service, or using -d, I do not see an entry for that port number in the listing generated by netstat -anp tcp.

  Read the article

• High load on X3220 Quad Core Linux Apache server

  - by John Templar

  I'm seriously in need of help. My sites are now nearly impossible to use because of massive loads on my server. I'm already a month late on my mortgage and this really isn't helping my situation. I've been working on fixing this intermittent load problem for months (never this bad). I'm suspecting some kind of attack since I'm under DDOS attack a lot! I've been trying to figure out what is causing the load but I'm afraid I just don't have the experience or knowledge to understand all the data I've been looking at. I don't even know where to begin or how to test for the large array of attacks out there. Here's some data you might find useful... Server: Xeon X3220 Quad Core 2.4 GHz - Linux, FreeBSD 500 GB HD and 8 Gig of Ram. Runs Centos release 5.7 Server Version: Apache/2.2.21 (Unix) mod_ssl/2.2.21 OpenSSL/0.9.8e-fips-rhel5 mod_auth_passthrough/2.1 mod_bwlimited/1.4 FrontPage/5.0.2.2635 mod_qos/9.74 Warning: All sites are softcore adult sites - mostly fantasy art like elves and amazons. 1) Sites may run fine for weeks or just days at less than 10 load then start jumping to 40-80 load - no idea why. Same sites, same mods, same amount of traffic - just WHAM! 2) I get an email almost every day that says: "Large Number of Failed Login Attempts from IP (different each time)". My webhost (who almost never helps me) told me it was a udp flood or something. 3) I've changed the port for MySQL from the default. If I ever put it back to the default - I get Loads of over 100 from what must be a constant mysql port flood. 4) I've reconfigured MYSQL. Link: http://www.deadlyamazons.com/logs/mycnf.txt 5) I have 3 Joomla Jomsocial networks. I've spent a couple weeks turning all the mods/plugins off, waiting a day and then turning them back on the next day or later if there isn't any change (there hasn't been). For example, on Thursday I'll turn off videos, on Friday I'll turn off chat.. etc and nothing changes the load appreciably. 6) Joomla info: All SEF turned off - sh404sef completely disabled and removed. Components: Joomla 1.5.22, Jomsocial 2.0.5, Kunena 1/31/2011, HWDMediashare 11/22/2010 and JBolo Chat 2.7.3, Comet Chat or Envolve Chat. Page Compression is on, Cache is on 15 mins. Please click on this forum to see links to all my reports: http://forum.joomla.org/viewtopic.php?f=433&t=706035&p=2777500#p2777500 Any help would be highly appreciated.

  Read the article

• Cygwin's RSYNC for large data transfer

  - by Tim Brigham

  I'm using rsync from Cygwin to do a large scale data transfer from an aging HP MSA 1000 to a new DAS attached to a different server. I have a daemon running on the remote server in read only mode and a local copy writing the files to disk. One of my servers is an image repository with over a million files spread across about 300 directories. Each file averages only a couple hundred kilobytes. More so than any other box this one is proving problematic. The rsync process will work for a while - some times 20 minutes, some times an hour - and then it simply quits and sits idle at a given file name. I have verified that the file isn't corrupt on the remote server and that the file is successfully created on the local drive. I ran the rsync client in -vv mode, which returns nothing. I checked out the logs created by the daemon. I looked at the network utilization on the interface, which is sitting idle. I looked at the AV settings to see if anything could pose a problem there. I even updated to the latest release of Cygwin. What do I need to in order to keep this connection up? EDIT: The client system is using the command rsync.exe server::Drives/f/Repo/ /cygdrive/T/Repo --archive -P -vv The server is using the command rsync.exe --daemon --no-detach --config "rsyncd.conf" The contents of rsyncd.conf: use chroot = false strict modes = false hosts allow = 192.168.100.9 log file = c:/rsyncd.log uid=0 gid=0 [Drives] path = /cygdrive read only = yes EDIT: The file server is 2003, the disk type on the array is GPT and the size is of the array is about 4 TB. EDIT: Stranger.. It looks like the process is reliably erroring out at about 175,000 files. Rsync runs fine when I pick the same directory it has problems with one at a time. EDIT: rsync version 3.0.9 protocol version 30 Copyright (C) 1996-2011 by Andrew Tridgell, Wayne Davison, and others. Web site: http://rsync.samba.org/ Capabilities: 64-bit files, 64-bit inums, 32-bit timestamps, 64-bit long ints, no socketpairs, hardlinks, symlinks, IPv6, batchfiles, inplace, append, ACLs, xattrs, iconv, symtimes A similar failure occurred when going from the same set of files with Cygwin to a Linux install. It didn't happen until several hours later than normal however.

  Read the article

• Pxe net install Centos with Static IP

  - by Stu2000

  I seem to be unable to perform a kickstart installation of centos5.8 with a netinstall. It correctly gets into the text installer, but keeps sending out a request for the dhcp server and failing. I have tried to manually set the IP everywhere. Here is my pxelinux.cfg file DEFAULT menu PROMPT 0 MENU TITLE Ubuntu MAAS TIMEOUT 200 TOTALTIMEOUT 6000 ONTIMEOUT local LABEL centos5.8-net kernel /images/centos5.8-net/vmlinuz MENU LABEL centos5.8-net append initrd=/images/centos5.8-net/initrd.img ip=192.168.1.163 netmask=255.255.255.0 hostname=client101 gateway=192.168.1.1 ksdevice=eth0 dns=8.8.8.8 ks=http://192.168.1.125/cblr/svc/op/ks/profile/centos5.8-net MENU end and here is my kickstart file: # Kickstart file for a very basic Centos 5.8 system # Assigns the server ip: 192.211.48.163 # DNS 8.8.8.8, 8.8.4.4 # London TZ install url --url http://mirror.centos.org/centos-5/5.8/os/i386 lang en_US.UTF-8 keyboard us network --device=eth0 --bootproto=static --ip=192.168.1.163 --netmask=255.255.255.0 --gateway=192.168.1.1 --nameserver=8.8.8.8,8.8.4.4 --hostname=client1-server --onboot=on rootpw --iscrypted $1$Snrd2bB6$CuD/07AX2r/lHgVTPZyAz/ firewall --enabled --port=22:tcp authconfig --enableshadow --enablemd5 selinux --enforcing timezone --utc Europe/London bootloader --location=mbr --driveorder=xvda --append="console=xvc0" # The following is the partition information you requested # Note that any partitions you deleted are not expressed # here so unless you clear all partitions first, this is # not guaranteed to work part /boot --fstype ext3 --size=100 --ondisk=xvda part pv.2 --size=0 --grow --ondisk=xvda volgroup VolGroup00 --pesize=32768 pv.2 logvol swap --fstype swap --name=LogVol01 --vgname=VolGroup00 --size=528 --grow --maxsize=1056 logvol / --fstype ext3 --name=LogVol00 --vgname=VolGroup00 --size=1024 --grow %packages @base @core @dialup @editors @text-internet keyutils iscsi-initiator-utils trousers bridge-utils fipscheck device-mapper-multipath sgpio emacs Here is my dhcp file: ddns-update-style interim; allow booting; allow bootp; ignore client-updates; set vendorclass = option vendor-class-identifier; subnet 192.168.1.0 netmask 255.255.255.0 { host tower { hardware ethernet 50:E5:49:18:D5:C6; fixed-address 192.168.1.163; option routers 192.168.1.1; option domain-name-servers 8.8.8.8,8.8.4.4; option subnet-mask 255.255.255.0; filename "/pxelinux.0"; default-lease-time 21600; max-lease-time 43200; next-server 192.168.1.125; } } Is it impossible to prevent it asking for a dynamic ip before trying to install from the net? Perhaps there is an error in of my files? My dhcp server is set to ignore client-updates, and is set to only works with one mac address whilst testing.

  Read the article

• Linksys WiFi usb dongle and linux woes

  - by MrStatic

  I have a Linksys WUSB54GC usb dongle and I have exhausted every thing I know about making this thing work in linux. I am using Fedora 13. Since it is not ready I can not view any networks. Any ideas would be great. tail of the system log Jun 2 20:14:35 localhost kernel: usb 1-7: new high speed USB device using ehci_hcd and address 8 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device found, idVendor=1737, idProduct=0077 Jun 2 20:14:35 localhost kernel: usb 1-7: New USB device strings: Mfr=1, Product=2, SerialNumber=3 Jun 2 20:14:35 localhost kernel: usb 1-7: Product: 802.11 g WLAN Jun 2 20:14:35 localhost kernel: usb 1-7: Manufacturer: Ralink Jun 2 20:14:35 localhost kernel: usb 1-7: SerialNumber: 1.0 Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::radio Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::assoc Jun 2 20:14:35 localhost kernel: Registered led device: rt2800usb-phy3::quality Jun 2 20:14:35 localhost NetworkManager[1367]: <info> found WiFi radio killswitch rfkill3 (at /sys/devices/pci0000:00/0000:00:1d.7/usb1/1-7/1-7:1.0/ieee80211/phy3/rfkill3) (driver <unknown>) Jun 2 20:14:35 localhost kernel: rt2800usb 1-7:1.0: firmware: requesting rt2870.bin Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): driver supports SSID scans (scan_capa 0x01). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): new 802.11 WiFi device (driver: 'rt2800usb' ifindex: 6) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): exported as /org/freedesktop/NetworkManager/Devices/4 Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): now managed Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 1 -> 2 (reason 2) Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): bringing up device. Jun 2 20:14:35 localhost kernel: ADDRCONF(NETDEV_UP): wlan0: link is not ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): preparing device. Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): deactivating device (reason: 2). Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): supplicant interface state: starting -> ready Jun 2 20:14:35 localhost NetworkManager[1367]: <info> (wlan0): device state change: 2 -> 3 (reason 42) [root@localhost log]# iwconfig lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bg Mode:Managed Access Point: Not-Associated Tx-Power=8 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on

  Read the article

• hosting 2 webapps under 1 apache/tomcat

  - by mkoryak

  I am trying to host multiple webapps under tomcat 6 behind apache2 via mod_jk. I am at my wits end with this. the problem i am facing that both domains seems to point to a single tomcat 'domain'. my server.xml looks like this: <Service name="Catalina"> <Connector port="8080" protocol="HTTP/1.1" connectionTimeout="20000" URIEncoding="UTF-8" redirectPort="8443" /> <Connector port="8009" protocol="AJP/1.3" redirectPort="8443" /> <Connector port="8010" protocol="AJP/1.3" redirectPort="8443" /> <Engine name="Catalina" defaultHost="dogself.com"> <Realm className="org.apache.catalina.realm.UserDatabaseRealm" resourceName="UserDatabase"/> <Host name="dogself.com" appBase="webapps-dogself" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> <Host name="natashacarter.com" appBase="webapps-natashacarter.com" unpackWARs="true" autoDeploy="true" xmlValidation="false" xmlNamespaceAware="false"> </Host> </Engine> </Service> my workers.properties looks like this: worker.list=dogself,natashacarter worker.dogself.port=8009 worker.dogself.host=dogself.com worker.dogself.type=ajp13 worker.natashacarter.port=8010 worker.natashacarter.host=natashacarter.com worker.natashacarter.type=ajp13 finally my apache vhosts look like this: <VirtualHost 69.164.218.75:80> ServerName dogself.com DocumentRoot /srv/www/dogself.com/public_html/ ErrorLog /srv/www/dogself.com/logs/error.log CustomLog /srv/www/dogself.com/logs/access.log combined JkMount /* dogself </VirtualHost> and <VirtualHost 69.164.218.75:80> ServerName natashacarter.com DocumentRoot /srv/www/dogself.com/public_html/ ErrorLog /srv/www/dogself.com/logs/error.log CustomLog /srv/www/dogself.com/logs/access.log combined JkMount /* natashacarter </VirtualHost> when i log into manager webapp on both dogself.com and natashacarter.com, i can deploy to a context path on dogself, and that same contextpath will appear on natashacarter - so i know for a fact that this is the same tomcat domain. edit: just found this in my mod_jk log [Sun Feb 20 21:15:43 2011] [28546:3075521168] [warn] map_uri_to_worker_ext::jk_uri_worker_map.c (962): Uri * is invalid. Uri must start with / [Sun Feb 20 21:16:44 2011] [28548:3075521168] [info] ajp_send_request::jk_ajp_common.c (1496): (dogself) all endpoints are disconnected, detected by connect check (1), cping (0), send (0) but not sure why dogself wouldnt respond please help a brother out

  Read the article

• UCARP: prevent the original master from taking over the VIP when it comes back after failure?

  - by quanta

  Keepalived can do this by combining the nopreempt option and the BACKUP state on the both nodes: Prevent VRRP Master from becoming Master once it has failed Prevent master to fall back to master after failure How about the UCARP? Name : ucarp Arch : x86_64 Version : 1.5.2 Release : 1.el5.rf Size : 81 k Repo : installed Summary : Common Address Redundancy Protocol (CARP) for Unix URL : http://www.ucarp.org/ License : BSD Description: UCARP allows a couple of hosts to share common virtual IP addresses in order : to provide automatic failover. It is a portable userland implementation of the : secure and patent-free Common Address Redundancy Protocol (CARP, OpenBSD's : alternative to the patents-bloated VRRP). : Strong points of the CARP protocol are: very low overhead, cryptographically : signed messages, interoperability between different operating systems and no : need for any dedicated extra network link between redundant hosts. If I don't use the --preempt option and set the --advskew to the same value, both nodes become master. /etc/sysconfig/carp/vip-010.conf # Virtual IP configuration file for UCARP # The number (from 001 to 255) in the name of the file is the identifier # $Id: vip-001.conf.example 1527 2004-07-09 15:23:54Z dude $ # Set the same password on all mamchines sharing the same virtual IP PASSWORD="pa$$w0rd" # You are required to have an IPADDR= line in the configuration file for # this interface (so no DHCP allowed) BIND_INTERFACE="eth0" # Do *NOT* use a main interface for the virtual IP, use an ethX:Y alias # with the corresponding /etc/sysconfig/network-scripts/ifcfg-ethX:Y file # already configured and ith ONBOOT=no VIP_INTERFACE="eth0:0" # If you have extra options to add, see "ucarp --help" output # (the lower the "-k <val>" the higher priority and "-P" to become master ASAP) OPTIONS="-z -k 255" /etc/sysconfig/network-scripts/ifcfg-eth0:0 DEVICE=eth0:0 ONBOOT=no BOOTPROTO= IPADDR=192.168.6.8 NETMASK=255.255.255.0 USERCTL=yes IPV6INIT=no node 1: eth0: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether c6:9b:8e:af:a7:69 brd ff:ff:ff:ff:ff:ff inet 192.168.6.192/24 brd 192.168.6.255 scope global eth0 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth0:0 inet6 fe80::c49b:8eff:feaf:a769/64 scope link valid_lft forever preferred_lft forever node 2: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast qlen 1000 link/ether 00:30:48:f7:0f:81 brd ff:ff:ff:ff:ff:ff inet 192.168.6.38/24 brd 192.168.6.255 scope global eth1 inet 192.168.6.8/24 brd 192.168.6.255 scope global secondary eth1:0 inet6 fe80::230:48ff:fef7:f81/64 scope link valid_lft forever preferred_lft forever

  Read the article

< Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >