Search Results

Search found 12827 results on 514 pages for 'regional settings'.

Page 423/514 | < Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >

• How to reinstall bootloader after migration to SSD

  - by hijarian

  I must say, it was difficult to name this question. Basically, I need to properly reinstall the bootloader on my system, because I already have the working system disks for my OSes. The long story is this: I had the large slow HDD with Windows7 & Debian Wheezy dual-boot on it, perfectly bootable. Then, I ordered the SSD drive and prepared my system partitions to fit onto the much smaller SSD. I wanted the following schema: 128 GB Windows 24 GB / on Debian 86 GB /home on Debian Strange size for /home because there's no such thing as true 256GB disk drive. So, I've prepared such a partitions on my initial HDD and installed the new SSD and then I loaded the GParted live USB (can't remember now how it was really named), and then just copypasted the partitions from HDD to SSD. So, now I have the following partitions across the physical disks: SSD 128 GB copy of original Windows partition 24 GB copy of presumably Debian / 86 GB copy of presumably Debian /home HDD 128 GB Windows 24 GB / on Debian 86 GB /home on Debian ... several other partitions with non-system data ... And the behavior of the system right after the Ctrl+C, Ctrl+V in GParted was as follows: no GRUB, system boots right into the Windows on HDD. In BIOS settings are to boot from SSD first. I managed to create the Debian Testing installation USB and loaded it into the rescue mode, found that it identified my SSD as /dev/sda and installed the GRUB to the /dev/sda. Now my system loads the GRUB which lists both Windows and Debian. From HDD. So, I am now back into initial position. Please, how I should set up the GRUB so it'll load the OSes correctly from SSD? Should I fire up my Debian, fiddle with the GRUB's config and reinstall it again to the same place (at SSD)?

  Read the article

• Advice on resizing 1280*720 for web audiences.

  - by jamiethompson90

  Forgive my spelling, I'm posting this from my mobile. I've recently decided to record videos to help teach a visual language. My camera likes to boast it can record in 1280; its a cheap camera about £75 so the quality isn't amazing. But its okay. Anyways, it has some other settings for lower res, but I figure might as well record in a larger size in case the need arises for a bigger source file in the future. I've been looking at jw player to play the converted files (mp4 to flv I think). What do you think a good size would be to convert to? I want to to look nice and clear remembering it is a visual language so lip patterns, facial expressions, body movement, fingers etc are all important, sound is not that important but I would like to have a choice to toggle captions. Thanks for any help, any advice apreciated, first time I have done a video project! P.s. If anyones interested its BSL. Jamie

  Read the article

• How can I make grub2 boot into Windows 7?

  - by Grzenio

  I had Windows 7 installed on my system, then I installed Debian testing with grub2 as its boot manager. Initially I couldn't see windows entry in grub at all, so I ran: aptitude install os-prober kcpuload update-grub Now I can see the entry, but when I select it I get only Win7 system restore, instead of the the real thing. Any ides how to make it work? EDIT: I tried the suggested approach to add a new file to /etc/grub.d, which generated an entry in grub.cfg, but it does not appear in the grub menu on boot :( I have this: grzes:/home/ga# cat /etc/grub.d/11_Windows #! /bin/sh -e echo Adding Windows >&2 cat << EOF menuentry “Windows 7? { set root=(hd0,2) chainloader +1 } And I have the following grub.cfg file: grzes:/home/ga# cat /boot/grub/grub.cfg # # DO NOT EDIT THIS FILE # # It is automatically generated by /usr/sbin/grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then load_env fi set default="0" if [ ${prev_saved_entry} ]; then set saved_entry=${prev_saved_entry} save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z ${boot_once} ]; then saved_entry=${chosen} save_env saved_entry fi } insmod ext2 set root=(hd0,3) search --no-floppy --fs-uuid --set 6ce3ff31-0ef7-41df-a6f5-b6b886db3a94 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=640x480 insmod gfxterm insmod vbe if terminal_output gfxterm ; then true ; else # For backward compatibility with versions of terminal.mod that don't # understand terminal_output terminal gfxterm fi fi set locale_dir=/boot/grub/locale set lang=en insmod gettext set timeout=5 ### END /etc/grub.d/00_header ###

  Read the article

• Windows Server 2003 IPSec Tunnel Connected, But Not Working (Possibly NAT/RRAS Related)

  - by Kevinoid

  Configuration I have setup a "raw" IPSec tunnel between a Windows Server 2003 (SBS) machine and a Netgear FVG318 according to the instructions in Microsoft KB816514. The configuration is as follows (using the same conventions as the article): NetA | SBS2003 | FVG318 | NetB 10.0.0.0/24 | 216.x.x.x | 69.y.y.y | 10.0.254.0/24 Both the Main Mode and Quick Mode Security Associations are successfully completed and appear in the IP Security Monitor. I am also able to ping the SBS2003 server on its private address from any computer on NetB. The Problem Any traffic sent from a computer on NetA to NetB, or from SBS2003 to NetB (excluding ICMP Ping responses), is sent out on the public network interface outside the IPSec tunnel (no encryption or header authentication, as if the tunnel were not there). Pings sent from a computer on NetB to a computer on NetA successfully reach computers on NetA, but the responses are silently discarded by SBS2003 (they do not go out in the clear and do not generate any encrypted traffic). Possible Solutions Incorrect Configuration I could have mistyped something, somewhere, or KB816514 could be incorrect in some way. I have tried very hard to eliminate the first option. Have re-created the configuration several times, tried tweaking and adjusting all the settings I could without success (most prevent the SA from being established). NAT/RRAS I have seen multiple posts elsewhere suggesting that this could be due to interaction between NAT and the IPSec filters. Possibly the NetA private addresses get rewritten to 216.x.x.x before being compared with the Quick Mode IPSec filters and don't get tunneled because of the mismatch. In fact, The Cable Guy article from June 2005 "TCP/IP Packet Processing Paths" suggests that this is the case, (see step 2 and 4 of the Transit Traffic path). If this is the case, is there a way to exclude NetA-NetB traffic from NAT? Any thoughts, ideas, suggestions, and/or comments are appreciated.

  Read the article

• Fortigate restrict traffic through one external IP

  - by Tom O'Connor

  I've got a fortigate 400A at a client's site. They've got a /26 from British Telecom, and we're using 4 of those IPs as a NAT Pool. Is there a way to say that traffic from 172.18.4.40-45 can only ever come out of (and hence go back into) x.x.x.140 as the external IP? We're having some problems with SIP which looks like it's coming out of one, and trying to go back into another. I tried enabling asymmetric routing, didn't work. I tried setting a VIP, but even when I did that, it didn't appear to do anything. Any ideas? I can probably post some firewall snippets if need be.. Tell me what you want to see. SIP ALG config system settings set sip-helper disable set sip-nat-trace disable set sip-tcp-port 5061 set sip-udp-port 5061 set multicast-forward enable end Interesting Sidenote VoIP phones, with no special configuration can register fine to proxy.sipgate.co.uk, which has an IP address of 217.10.79.16. Which is cool. Two phones are using a different provider, whose proxy IP address is 178.255.x.x. These phones can register for outbound, but inbound INVITEs never make it to the phone. Is it possible that the Fortigate is having trouble with 178.255.x.x as it's got a 255 in it? Or am I just imagining things?

  Read the article

• My home router randomly disconnects me and I'm unable to reconnect to it

  - by Roy Tang

  It's happened a few times, I'm not sure how to diagnose/debug, so any advise would be appreciated. Symptons: sometimes the router will randomly disconnect; the connection icon on my desktop (wired to the router) gets that yellow "!" symbol that tells me my connection just went down. At this point I'm unable to ping the router. afterwards I try to reset the router by removing then reconnecting the power jack on the router side (this is the fastest way as I can't reset the power strip it's connected to without rebooting my desktop. the router has a reset thingy, but it's one of those things where i have to find a pin to stick into the hole, and when I get disconnected I usually need to get reconnected immediately so I just pull and put back the power jack), but even after that the connection has the same state. after the router reboots, if I try to connect to it using a wifi device like my ipad, the ipad prompts me for the wifi password even though it had already "remembered" all the settings for this router forever after i finally decide to reboot the power strip, and my desktop and the router boot up again, the connection returns to its normal state somewhat and i'm able to connect to it as normal using the desktop and wifi devices. What do I need to check the next time this happens so I can figure out the problem? Is it possibly because we've been using the power jack on the router as an easier way to reboot it? Should I be shopping around for a new router? If it helps, the router is a DLink DIR-300

  Read the article

• Exceptional slowdown of robocopy copying from VM to DFS array

  - by user1588867

  I've got an old win 2003 VM (VMware) on a blade cluster of VMs that I'm moving a considerable amount of files to our new DFS array. There are two main folders with about 1.7 million and half a million smaller files (letters, memos, and other smaller files) respectively. Total size is ~420 GB and ~100 GB. We're using the gui version of robocopy on the server to copy the files. We had initiated a file copy about a month ago to test the process and found that it was taking around 4 hours for the large file. Now that I'm in the process of actually switching the files over it has been taking 18-20 hours. Nothing has changed on the server side and nothing has changed on the settings of the copy (no logs, 1 retry with a wait of 1 second). Our intent is to shut off the share and force the copy over again to get all the files that have been left out of the copy due to being locked by users. I can't take a 20 hour outage to do that though. Does anyone have any theories about what could be causing such a delay for robocopy compared to previously shorter runs?

  Read the article

• Does ICS modify windows firewall policies in the registry?

  - by insipid

  I had a host machine I wanted to enable ICS on. First I realized that doing so was not possible until I enabled the Windows Firewall. Once I enabled the firewall and set up ICS, I noticed due to group policy I could no longer disable the firewall. Also, any ports I tried to open seemed to be ignored. Although nothing seemed to be configured when I used the mmc snap-in to view local computer policy, when I checked the registry I noticed several policies set there in HKLM (such as disabling AllowLocalPolicyMerge). I was able to remove the policies from the registry and my open ports worked, but they were eventually re-added without my input. The network I am sharing the internet from is an "unsecured" wireless network with an authentication page, is it possible that this is causing those policies to be set? Did ICS set those policies? When you go to the properties of the ICS enabled adapter and go to the ICS settings it takes you to a tab called services where you can add and remove "services running on your network that internet users can access". Is this related to the windows firewall?

  Read the article

• Decrease in disk performance after partitioning and encryption, is this much of a drop normal?

  - by Biohazard

  I have a server that I only have remote access to. Earlier in the week I repartitioned the 2 disk raid as follows: Filesystem Size Used Avail Use% Mounted on /dev/mapper/sda1_crypt 363G 1.8G 343G 1% / tmpfs 2.0G 0 2.0G 0% /lib/init/rw udev 2.0G 140K 2.0G 1% /dev tmpfs 2.0G 0 2.0G 0% /dev/shm /dev/sda5 461M 26M 412M 6% /boot /dev/sda7 179G 8.6G 162G 6% /data The raid consists of 2 x 300gb SAS 15k disks. Prior to the changes I made, it was being used as a single unencrypted root parition and hdparm -t /dev/sda was giving readings around 240mb/s, which I still get if I do it now: /dev/sda: Timing buffered disk reads: 730 MB in 3.00 seconds = 243.06 MB/sec Since the repartition and encryption, I get the following on the separate partitions: Unencrypted /dev/sda7: /dev/sda7: Timing buffered disk reads: 540 MB in 3.00 seconds = 179.78 MB/sec Unencrypted /dev/sda5: /dev/sda5: Timing buffered disk reads: 476 MB in 2.55 seconds = 186.86 MB/sec Encrypted /dev/mapper/sda1_crypt: /dev/mapper/sda1_crypt: Timing buffered disk reads: 150 MB in 3.03 seconds = 49.54 MB/sec I expected a drop in performance on the encrypted partition, but not that much, but I didn't expect I would get a drop in performance on the other partitions at all. The other hardware in the server is: 2 x Quad Core Intel(R) Xeon(R) CPU E5405 @ 2.00GHz and 4gb RAM $ cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 32 Lun: 00 Vendor: DP Model: BACKPLANE Rev: 1.05 Type: Enclosure ANSI SCSI revision: 05 Host: scsi0 Channel: 02 Id: 00 Lun: 00 Vendor: DELL Model: PERC 6/i Rev: 1.11 Type: Direct-Access ANSI SCSI revision: 05 Host: scsi1 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: CD-ROM GCR-8240N Rev: 1.10 Type: CD-ROM ANSI SCSI revision: 05 I'm guessing this means the server has a PERC 6/i RAID controller? The encryption was done with default settings during debian 6 installation. I can't recall the exact specifics and am not sure how I go about finding them? Thanks

  Read the article

• Associate email account with "Personal Folders" Outlook data file?

  - by TheLQ

  In the process of migrating email servers I've run into an interesting problem: In Outlook 2007 you have the default "Personal Folders" item. This contains the email for the account that was origionally setup with Outlook. My issue is that I have deleted the account associated with that and created an entirely new account. So now I have "Personal Folders" and "[email protected]". However I can't delete "Personal Folders". nor associate "[email protected]" with that PST file. Deleteting it in Outlook (Tools Account Settings Data Files) gave the error "The default data file cannot be removed, because it is your default delivery location. After you have selected a different default delivery location, your current file can be removed." Deleting the PST file itself (outlook.pst) made outlook demand where its default file . would be. So I selected my "[email protected]" PST file and restarted Outlook. Now "Personal Folders" is called "[email protected]", but I still have a duplicate account called this. Which is bad. Worse, my email is associated with the duplicate PST, not the default. How can I associate my email with my default PST or delete the default PST entirely? Luckily I have backu

  Read the article

• Amavisd-new(2.6.4-3) failing to do "lookup_sql_dsn" when large number of emails are need to be accessed

  - by sandip

  Amavis is failing to do sql lookup when large number of emails are sent to amavis. Its throwing out error after scanning 40 to 50 email. It shows error like. (!!)TROUBLE in process_request: sql exec: err=7, 57P01,DBD::Pg::st bind_param failed:FATAL: terminating connection due to administrator command\nSSL connection has been closed unexpectedly at (eval 103) line 164, <GEN50> line 5. at (eval 104) line 280, <GEN50> line 5. As soon as this error appears in the logs, Amavis stops and port 10024 is closed. Thinking it to an error due to ssl connection in the database(postgresql-8.4), i had stopped ssl in postgres, but it was of no use. I have tried to configure amavis on another server, but i got the same error again. This happening on a production server, So i am not being able to scan emails as per user settings. Anybody have any idea, what may be the source of this error ?? Please help. Thanks in advance

  Read the article

• Windows 2008 Server can't connect to FTP

  - by stivlo

  I have Windows 2008 Server R2, and I am trying to install FTP services. My problem is I can't connect from outside, FileZilla complains with: Error: Connection timed out Error: Could not connect to server Here is what I did. With the Server Manager, I've installed the Roles FTP Server, FTP Service and FTP Extensibility. In Internet Information Services version 7.5, I've chosen Add FTP Site, enabled Basic Authentication, Allow a user to connect Read and Write. In FTP Firewall support on the main server, just after start page, I've set Data Channel Port Range to 49100-49250 and set the external IP Address as the one I see from outside. If I click on FTP IPv4 Address and Domain Restrictions, and click on Edit Feature Settings, I see that access for unspecified clients is set to Allow, so I click OK without changing those defaults. In FTP SSL Policy, I've set to Require SSL connection, certificate is self signed. I tried to connect with FileZilla from the same host and it works, however it doesn't work remotely, as I said above. I've enabled pfirewall.log, but apparently nothing gets logged. The server is in Amazon EC2, and on the security group inbound firewall rules, I've set that ports 21 and ports 49100-49250 accepts connections from everywhere. What else should I be checking to solve the problem?

  Read the article

• Windows 7 - Can't get my TV working as primary display with nVidia 7900GS

  - by Daniel Schaffer

  I just installed Windows 7 Ultimate 64 RTM (from MSDN) on my HTPC, which is connected to a 42" Magnavox LCD TV via component cables to my nVidia 7900GS. Everything was fine through the installation until I went to install the official driver from nVidia. Towards the end of the installation, the TV blinked off and wouldn't come back on. I went and got an LCD monitor and plugged it into a DVI port and the monitor came right up, but was automatically selected as the primary display. Now, if I set the TV to be the primary display, the TV just blanks until I hit escape to cancel the "settings have changed, do you want to keep them" dialog. Any suggestions? Update: I'm able to set the TV as the primary display using the Windows 7 "screen resolution" configuration panel. However, if I try to remove the LCD monitor either by unplugging it or using the configuration, the TV blanks out again. Update 2: This setup was working correctly in Vista Home Premium 32-bit. Update 3: I've uninstalled the nVidia driver and am using the driver that Windows Update installed. As much as this offends my geek sensibilities (must use the "right" driver!!), well, It Works™.

  Read the article

• IIS7.5 - about app pool ID's and folder read/write access

  - by merk

  I did some searching and it looks like for each app pool, there should be an account created called IIS APPPOOL\AppPoolName - however i can see no such account when i try to modify the permissions on a folder to give that app write access. The closest I have found is the IIS_IUSRS group. Now, if i go into that group and look at the members, i see several IIS APPPOOL\PoolName members. But where are these members coming from? Why don't they show up under the users? And why can't i add a specific one to a folder? It doesn't make sense to me to add the IIS_IUSRS group to a folder since they gives every site access to the folder. To be more specific, I'm setting up wordpress and it unfortunately wants write access to the root folder. So i want to restrict it as much a possible. I was trying to figure out how to set it so that the WP root folder has write access only for the ID that the blog's app pool is running under. When i drill down into the IIS_IUSRS group, i do not see the app pool for the blog listed there. The settings for the blog's app pool are: No managed code, Classic, ApplicationPoolIdentity, and it's named 'blog' So any explanations regarding these users that are created for the app pools, and why the blog doesn't seem to belong to the iusrs group? thanks

  Read the article

• Disable touch pad for mouse button region on new HP pavillion models?

  - by John

  i bought a new hp pavillion dv6 series laptop. the laptop itself is fine but it has the new hp touchpad mouse which i absolutely hate. its such a stupid problem to have with a computer. the left and right mouse buttons are, themselves, part of of the touchpad, meaning that if i tap the buttons without actually pressing them down, it registers the same way as the mouse pad (the cursor moves, tap to click activates, etc.) this is a major annoyance because it prevents you from operating the mouse pad with anything more than a single finger; if for example i use my right hand index finger to move the cursor using the touch pad and rest my left hand index finger on the left mouse button for more efficient mouse-ing, the mouse will react as if im trying to use 2 fingers to move it and it will either just sit there or will spaz out. the only way this works is if i keep the finger that is resting on the mouse button absolutely still, which is very difficult and, therefore, very annoying. also, even if i do abide by the arbitrary new decree of single-finger mousepad operation, i still have a problem because when i press down on the left or right click buttons, the mouse moves slightly, what with the buttons also being part of the touch pad and all. this would not be that hard to avoid except that they decided to also make the buttons much harder to press down. now whenever i go to click something, i press hard on the mouse button, causing my finger to slightly move or roll or flatten out a bit, causing the cursor to move slightly, and causing me to click on something different. what i would like to know is if there is anyway that i can disable the touch pad on the buttons. i have gone through all of the settings under the synaptics menus but i cannot find anything about this. did i miss something in one of the menus? if not, then are there any updated drivers that allow for toggling of this function?

  Read the article

• what type of laptop do I need to run a amd64 or i386 VM?

  - by Frank Schwieterman

  I was running an amd64 build of Ubuntu on a VM on a Windows host which was also amd64. Later I found I could not run the same amd64 iso on my laptop, which is intel without hyper-V. I was confused I thought chipset mattered, but maybe it does not. When buying a PC or Apple, is there anything to check about the chipset to make sure it can run different types of VMs? In my case, I was trying to run ubuntu on a Thinkpad T520. Per answer below, I did need to enable some bios settings. I'm still having some issues. Running ubuntu on virtual box, when I try to use ubuntu-12.10-server-amd64.iso for the CD/DVD device to start a new VM, virtualbox complains "Failed to open the CD/DVD image . Could not get the storage format of the medium (VERR_NOT_SUPPORTED). When I try to use ubuntu-12.10-server-i386.iso the ISO is accepted, but then the VM complains "FATAL: No bootable medium found! System halted." I had been using an amd64 iso on my home PC which is amd64 and it works fine, which is why I suspected CPU mismatch was the problem at first. But it seems like I'm having issues, and maybe this superuser thread can be used to verify the cpu is irrelevant in this case.

  Read the article

• Access is denied when running batch file on Windows7

  - by Radek

  I have a bat file on Windows7 that I used to run. Now I am not able to run it because of Access is denied error. My account is part of administrator group. C:\EduTester\others>mysqlbackup.bat Access is I am able to see the file via more mysqlbackup.bat when inside the directory where the file sits. C:\EduTester\others>more mysqlbackup.bat @echo off rem settings etc etch In fact I used to run the bat file as administrator using runas command runas /savecred /user:yogurt\administrator "c:\EduTester\others\mysqlbackup.bat" Attempting to start c:\EduTester\others\mysqlbackup.bat as user "yogurt\administrator" ... RUNAS ERROR: Unable to run - c:\EduTester\others\mysqlbackup.bat 2: The system cannot find the file It used to run ok few days ago. I am not aware that I would change something that could affect this. I have just tried to restart the Windows7 computer and I am experiencing the same. UPDATE In event viewer I can see this Windows cannot load the user's profile but has logged you on with the default profile for the system I think it might the be cause...

  Read the article

• Quickly close all Word and Excel instances?

  - by dyenatha

  Suppose I open 10 Word files and 10 Excel files and make no changes, how do I quickly taskkill all at once? Because I must repeat several attempts to replicate race, I'm hoping for a command-line solution. I'm willing to try PowerShell and cygwin (1.5) if necessary. The OS is Windows XP SP3 with current patches (still IE7). I tried "taskkill /pid 1 /pid 2 /t" where 1 is PID of EXCEL.EXE and 2 is PID of WINWORD.EXE, but it closed only 1 window of each program. I'm trying to replicate a race where an add-in for Microsoft Office 2007 fails to exclusive-lock one of its own files, which caused the 2nd Office program to stop exiting with a warning: System.IO.IOException: The process cannot access the file 'C:\Documents and Settings\me\Application Data\ExpensiveProduct\Add-InForMicrosoftOffice\4.2\egcred' because it is being used by another process. at System.IO.__Error.WinIOError(Int32 errorCode, String maybeFullPath) at System.IO.FileStream.Init(String path, FileMode mode, FileAccess access, Int32 rights, Boolean useRights, FileShare share, Int32 bufferSize, FileOptions options, SECURITY_ATTRIBUTES secAttrs, String msgPath, Boolean bFromProxy) at System.IO.FileStream..ctor(String path, FileMode mode, FileAccess access, FileShare share, Int32 bufferSize, FileOptions options) at System.IO.StreamWriter.CreateFile(String path, Boolean append) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding, Int32 bufferSize) at System.IO.StreamWriter..ctor(String path, Boolean append, Encoding encoding) at System.IO.File.WriteAllText(String path, String contents, Encoding encoding) at ExpensiveProduct.EG.DataAccess.Credentials.CredentialManager.SaveUserTable() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.WordAddin.Dispose(Boolean disposing) at ExpensiveProduct.OfficeAddin.OfficeAddinBase.OnHostShutdown() at ExpensiveProduct.OfficeAddin.OfficeAddinBase.Unload(ext_DisconnectMode mode)

  Read the article

• computer fails to boot during/after POST for five or six boots, then works

  - by N13

  For the last few days, my computer has had issues booting. I've seen two different behaviors: The screen displays the graphics card information, then begins to list the RAM, hard drives, etc. At different points in this process (after the graphics info), the computer shuts off. After five or six attempts, it then boots normally. In roughly the same time frame, the computer freezes, and fails to boot. I think it boots successfully on the next attempt. I've also noticed that in some instances, the computer freezes on shutdown. It gets right to the point where it should shut off, but doesn't. I recently combined the best parts of two different machines into this one. I'm booting to GRUB, with Ubuntu 12.04, Linux Mint 11 and Windows Vista (unfortunately) as my OS options. It has an Enermax Modu82+ 525W power supply, and I've used an online calculator to determine that my load shouldn't exceed 400W. I even unplugged a hard drive, but that didn't help. I found the latest BIOS, patched it and checked the settings, but that didn't fix it. I'm fairly certain this issue didn't exist at first, but might have started when the power at my new apartment dropped for a second. The machine is plugged into a surge protector strip, but it's old and I've heard they lose effectiveness with age. Is a power dip as damaging as a spike? If something were damaged, why would it boot successfully after five or six attempts? It's almost like the BIOS or PSU need to be primed. The trouble with debugging is that there seems to be a "grace period" after shutdown where the issue doesn't present itself again. What should I try next?

  Read the article

• Force delivery retry without restarting the SMTP Service on Windows Server 2008 R2

  - by Mathias R. Jessen

  I have a Windows Server 2008 R2 box hosting 3 virtual SMTP servers; vSMTP01, vSMTP02 and vSMTP03. The first two are configured to deliver all messages to dedicated smarthosts, while the last is set to just deliver the messages on its own. All other delivery settings are as default ----(vSMTP01)-----> {SMARTHST01} / ----Inbound mail--->---SMTPSRV01---[----(vSMTP02)-----> {SMARTHST02} \ ----(vSMTP03)-----> { Internet } Now I want to take SMARTHST01 out for maintenance, but I don't want to reject submissions to vSMTP01 while doing so, so I just let it continue running. When SMARTHST01 is no longer responding, vSMTP01 queues the messages and wait for the first retry interval to pass (15 minutes). So far so good. Let's say SMARTHST01 gets online again after 20 minutes. The first interval has passed, and I'll have to wait another 25 minutes for the second retry interval to pass. If I stop and start the SMTP Service (Services.msc - Simple Mail Transfer Protocol service - Stop), the server will retry all deliveries, but that would cause a service interruption for ALL virtual SMTP servers on the machine, which is highly undesirable. How can I manually force vSMTP01 to retry delivery of all queued messages without interrupting the service of vSMTP02 and vSMTP03?

  Read the article

• How do I start the Workstation Service so I can use `net use`?

  - by nitefrog

  I have a Windows 7 machine that logs into a domain. The machine can net view and see the different shares, but when I try to use, net use * \\name\share, I get an error stating that the service is not started. Yet when I issue a net start, it states the service is already started. My other win7 machines work fine; they can see and use any of the shares. Is there a security setting that needs to be disabled or enabled? I really need to get this working, and I have no other ideas as the other machines have no problem accessing the shares on different systems. The error I am getting is , "The Workstation Service Has Not Been Started", but like I said other machines can connect fine, and when I issue a, "net start workstation", it states the service is already started. In addition the error number I am receiving is 2138. UPDATE: On the machine that is having issues. From the troubled machine if I issue a Net View \\name I can see all the shares on the machine I want to connect to. When I try to net use * \\name\sharename I get the error The Workstation service has not started. I have set both settings sc config lanmanworkstation start = auto and sc config lanmanserver start = auto on the Windows7 computer that is having issues. I have rebooted the computer and still no dice. I can net view any computer on the network and see all shares, but I cannot access any of the shares in which I can see. In the registry under the HKLM\System\CurrentControlSet\Services Both LanmanServer and LanmanWorkstation start is set to 2. Screen capture of net use and view: The Services: This is really weird. What am I missing? It has to be a security setting...

  Read the article

• IIS 7 much slower than IIS 6

  - by JoeJoe

  I have a asp.net 3.5 web application running fine on Windows2003 IIS6. I published same exact application to IIS7.5 (Win2008R2) on a faster box (i5,8Gram) and it is significantly slower. 5-6 sec per page vs. 1-2 sec per page. During that time the Task Mgr CPU is always under 10%. Both attach to same database on other box. Benchmark is consistent from any other client browser or machine. I have connection pool on both, compression on both. Same network subnet. Forms authentication (no SSL yet). Can you give me steps on how to troubleshoot where the delays are being inserted or settings in IIS7 that I may have overlooked. Just using defaults. There is only 1 web site on each box. I understand the roles of an Application as defined in IIS has changed. There is no special Application defined in IIS.

  Read the article

• How do I find the cause for a huge difference in performance between two identical Ubuntu servers?

  - by the.duckman

  I am running two Dell R410 servers in the same rack of a data center. Both have the same hardware configuration, run Ubuntu 10.4, have the same packages installed and run the same Java web servers. No other load. One of them is 20-30% faster than the other, very consistently. I used dstat to figure out, if there are more context switches, IO, swapping or anything, but I see no reason for the difference. With the same workload, (no swapping, virtually no IO), the cpu usage and load is higher on one server. So the difference appears to be mainly CPU bound, but while a simple cpu benchmark using sysbench (with all other load turned off) did yield a difference, it was only 6%. So maybe it is not only CPU but also memory performance. I tried to figure out if the BIOS settings differ in some parameter, did a dump using dmidecode, but that yielded no difference. I compared /proc/cpuinfo, no difference. I compared the output of cpufreq-info, no difference. I am lost. What can I do, to figure out, what is going on?

  Read the article

• Win 7 Remote Desktop connection failure when already logged in.

  - by Andy E

  I have a bit of a strange problem, magnified recently by my broadband dropouts. I wasn't sure whether to post this on SU or SF, so I thought I'd start here as more users would be likely to know what the problem is. In short, when I try and connect to my server (Windows Server 2008) from my laptop running Windows 7, I can only connect if my remote account was previously logged out. If I'm still logged in I get the error message: Windows cannot connect to the remote server. No explanation or anything. If my IP address is the same, I don't have this problem. If I boot up Windows XP Mode and run XP's remote desktop connection it works just fine -- I think the difference there is it takes me to the remote server's logon screen. With Win 7 RDC you never see the logon screen, it asks you for credentials before entering full screen mode. The real problem is that I'm having random broadband dropouts and my IP isn't static. If I logon via Win XP RDC, log out and then run Win 7 RDC then it works fine. I realize I can just use Win XP's RDC for now, but I don't really like keeping XP Mode open if I can help it. Does anyone know a way around this problem? Maybe forcing Win 7 RDC to go to the logon screen, or changing some server-side settings to work around the IP address issue?

  Read the article

• How to boot XBMC 10.1 ISO on USB via grub?

  - by Shi

  I am trying to boot the XBMC Live image (http://xbmc.org/download/) as ISO from USB via grub 1.98. I have a Kubuntu 11.04 image there as well already and it works using the following configuration: menuentry "Kubuntu 11.04 64bit" { loopback loop /boot/iso/kubuntu-11.04-desktop-amd64.iso linux (loop)/casper/vmlinuz boot=casper iso-scan/filename=/boot/iso/kubuntu-11.04-desktop-amd64.iso noeject noprompt initrd (loop)/casper/initrd.gz } However, if I try to boot XBMC in an analogue way, I always get an error "Unable to find a medium containing a live file system". I found different approaches to install XBMC, but they all are about installing the distribution on USB, or using grub4dos, or unetbootin. I already found out that XBMC 10.1 is based on Ubuntu 10.04.2 LTS, so I tried those settings - even though they are quite similar to Kubuntu 11.04. Finally, the ISO contains a grub configuration as well in boot/grub/grub.cfg, but even with those parameters, I get the error above. My current configuration is the following one: menuentry "xbmc 10.1" { loopback loop /boot/iso/xbmc-10.1-live.iso linux (loop)/live/vmlinuz video=vesafb boot=live iso-scan/filename=/boot/iso/xbmc-10.1-live.iso xbmc=autostart,nodiskmount splash quiet loglevel=0 persistent quickreboot quickusbmodules notimezone noaccessibility noapparmor noaptcdrom noautologin noxautologin noconsolekeyboard nofastboot nognomepanel nohosts nokpersonalizer nolanguageselector nolocales nonetworking nopowermanagement noprogramcrashes nojockey nosudo noupdatenotifier nouser nopolkitconf noxautoconfig noxscreensaver nopreseed union=aufs initrd (loop)/live/initrd.img } Any more ideas or any more information I should supply?

  Read the article

< Previous Page | 419 420 421 422 423 424 425 426 427 428 429 430  | Next Page >