Search Results

Search found 11808 results on 473 pages for 'circular reference'.

Page 424/473 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• SQL SERVER – Weekly Series – Memory Lane – #004

  - by pinaldave

  Here is the list of curetted articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2006 Auto Generate Script to Delete Deprecated Fields in Current Database In early career everytime I have to drop a column, I had hard time doing it because I was scared what if that column was needed somewhere in the code. Due to this fear I never dropped any column. I just renamed the column. If the column which I renamed was needed afterwards it was very easy to rename it back again. However, it is not recommended to keep the deleted column renamed in the database. At every interval I used to drop the columns which was prefixed with specific word. This script is 6 years old but still works. Give it a look, I am open for improvements. 2007 Shrinking Truncate Log File – Log Full – Part 2 Shrinking database or mdf file is indeed bad thing and it creates lots of problems. However, once in a while there is legit requirement to shrink the log file – a very rare one. In the rare occasion shrinking or truncating the log file may be the only solution. However, one should make sure to take backup before and after the truncate or shrink as in case of a disaster they can be very useful. Remember that truncating log file will break the log chain and while restore it can create major issue. Anyway, use this feature with caution. 2008 Simple Use of Cursor to Print All Stored Procedures of Database Including Schema This is a very interesting requirement I used to face in my early career days, I needed to print all the Stored procedures of my database. Interesting enough I had written a cursor to do so. Today when I look back at this stored procedure, I believe there will be a much cleaner way to do the same task, however, I still use this SP quite often when I have to document all the stored procedures of my database. Interesting Observation about Order of Resultset without ORDER BY In industry many developers avoid using ORDER BY clause to display the result in particular order thinking that Index is enforcing the order. In this interesting example, I demonstrate that without using ORDER BY, same table and similar query can return different results. Query optimizer always returns results using any method which is optimized for performance. The learning is There is no order unless ORDER BY is used. 2009 Size of Index Table – A Puzzle to Find Index Size for Each Index on Table I asked this puzzle earlier where I asked how to find the Index size for each of the tables. The puzzle was very well received and lots of interesting answers were received. To answer this question I have written following blog posts. I suggest this weekend you try to solve this problem and see if you can come up with a better solution. If not, well here are the solutions. Solution 1 | Solution 2 | Solution 3 Understanding Table Hints with Examples Hints are options and strong suggestions specified for enforcement by the SQL Server query processor on DML statements. The hints override any execution plan the query optimizer might select for a query. The SQL Server Query optimizer is a very smart tool and it makes a better selection of execution plan. Suggesting hints to the Query Optimizer should be attempted when absolutely necessary and by experienced developers who know exactly what they are doing (or in development as a way to experiment and learn). Interesting Observation – TOP 100 PERCENT and ORDER BY I have seen developers and DBAs using TOP very causally when they have to use the ORDER BY clause. Theoretically, there is no need of ORDER BY in the view at all. All the ordering should be done outside the view and view should just have the SELECT statement in it. It was quite common that to save this extra typing by including ordering inside of the view. At several instances developers want a complete resultset and for the same they include TOP 100 PERCENT along with ORDER BY, assuming that this will simulate the SELECT statement with ORDER BY. 2010 SQLPASS Nov 8-11, 2010-Seattle – An Alternative Look at Experience In year 2010 I attended most prestigious SQL Server event SQLPASS between Nov 8-11, 2010 at Seattle. I have only one expression for the event - Best Summit Ever. Instead of writing about my usual routine or the event, I wrote about the interesting things I did and how I felt about it! When I go back and read it, I feel that this is the best event I attended in year 2010. Change Database Access to Single User Mode Using SSMS Image says all. 2011 SQL Server 2012 has introduced new analytic functions. These functions were long awaited and I am glad that they are now here. Before when any of this function was needed, people used to write long T-SQL code to simulate these functions. But now there’s no need of doing so. Having available native function also helps performance as well readability. Function SQLAuthority MSDN CUME_DIST CUME_DIST CUME_DIST FIRST_VALUE FIRST_VALUE FIRST_VALUE LAST_VALUE LAST_VALUE LAST_VALUE LEAD LEAD LEAD LAG LAG LAG PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_CONT PERCENTILE_DISC PERCENTILE_DISC PERCENTILE_DISC PERCENT_RANK PERCENT_RANK PERCENT_RANK Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• WebSocket API 1.1 released!

  - by Pavel Bucek

  Its my please to announce that JSR 356 – Java API for WebSocket maintenance release ballot vote finished with majority of “yes” votes (actually, only one eligible voter did not vote, all other votes were “yeses”). New release is maintenance release and it addresses only one issue:  WEBSOCKET_SPEC-226. What changed in the 1.1? Version 1.1 is fully backwards compatible with version 1.0, there are only two methods added to javax.websocket.Session: 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * @param clazz   type of the message processed by message handler to be registered. * @param handler whole message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native *                               websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Whole<T> handler); /** * Register to handle to incoming messages in this conversation. A maximum of one message handler per * native websocket message type (text, binary, pong) may be added to each Session. I.e. a maximum * of one message handler to handle incoming text messages a maximum of one message handler for * handling incoming binary messages, and a maximum of one for handling incoming pong * messages. For further details of which message handlers handle which of the native websocket * message types please see {@link MessageHandler.Whole} and {@link MessageHandler.Partial}. * Adding more than one of any one type will result in a runtime exception. * * * @param clazz   type of the message processed by message handler to be registered. * @param handler partial message handler to be added. * @throws IllegalStateException if there is already a MessageHandler registered for the same native *                               websocket message type as this handler. */ public void addMessageHandler(Class<T> clazz, MessageHandler.Partial<T> handler); Why do we need to add those methods? Short and not precise version: to support Lambda expressions as MessageHandlers. Longer and slightly more precise explanation: old Session#addMessageHandler method (which is still there and works as it worked till now) does rely on getting the generic parameter during the runtime, which is not (always) possible. The unfortunate part is that it works for some common cases and the expert group did not catch this issue before 1.0 release because of that. The issue is really clearly visible when Lambdas are used as message handlers: 1 2 3 session.addMessageHandler(message -> { System.out.println("### Received: " + message); }); There is no way for the JSR 356 implementation to get the type of the used Lambda expression, thus this call will always result in an exception. Since all modern IDEs do recommend to use Lambda expressions when possible and MessageHandler interfaces are single method interfaces, it basically just scream “use Lambdas” all over the place but when you do that, the application will fail during runtime. Only solution we currently have is to explicitly provide the type of registered MessageHandler. (There might be another sometime in the future when generic type reification is introduced, but that is not going to happen soon enough). So the example above will then be: 1 2 3 session.addMessageHandler(String.class, message -> { System.out.println("### Received: " + message); }); and voila, it works. There are some limitations – you cannot do 1 List<String>.class , so you will need to encapsulate these types when you want to use them in MessageHandler implementation (something like “class MyType extends ArrayList<String>”). There is no better way how to solve this issue, because Java currently does not provide good way how to describe generic types. The api itself is available on maven central, look for javax.websocket:javax.websocket-api:1.1. The reference implementation is project Tyrus, which implements WebSocket API 1.1 from version 1.8.

  Read the article

• Poor Customer Service Example

  - by MightyZot

  Lately I have been frustrated by examples of poor customer service. At least one is worth writing about because I don’t think companies realize the effects of their service policies on loyal customers. Bad Customer Service Example #1 Recently, I received an offer in the mail from my cable company, suddenLink. The offer was for an updated TiVo for $12/mo. Normally I ignore offers like this one because I already have the service they’re offering and many times advertisers are offering alternatives to what is already an excellent product offering. I tend to exhibit a high level of loyalty to the products and brands that I use. In this case, we were looking to upgrade our TiVo and this deal is attractive for several reasons: I don’t want to pay a huge amount up-front for the device, so paying a monthly amount for the device is attractive to me. My entertainment is almost all on a single invoice. I’m no longer going to be billed by suddenLink and TiVo. TiVo is still involved, so I am still loyal to the brand I love. I have resisted moving to other DVRs and services for over a decade. I called suddenLink to order the new TiVo and was rewarded with great customer service. In fact, I can’t remember ever getting poor customer service from suddenLink. They are always there to answer my technical support questions and they are very responsive to outages. Then I called TiVo. First of all, I chose the option on the phone system to change or cancel my service, which was consequently met by an inordinate hold time. (I’m calling this time inordinate because I get through very quickly if I want to purchase something.) This is a trend that I’ve noticed with companies – if you want me to be loyal to you, it should be just as easy to cancel your service as it is to purchase it. Because, I should never be cancelling because I am unhappy. And, if you ever want my business again, or more importantly a reference, then you’d better make the exit door open just as easy as the enter door. After quite some time on hold, I talked to “Victor” who was very courteous. Victor canceled my service and then told me that I could keep my current TiVo and transfer recorded programs to it from the new TiVo.  Cool I said, but what about the cost?  He said there was no extra cost.  This was also attractive to me because I paid for my TiVo and it would be good to use it for something at least.  That was four months ago. This month I noticed that TiVo was still charging me for my original service. I was a little upset, but I decided to give them the benefit of the doubt. After all, I am a loyal TiVo customer and I have resisted moving to other solutions for over a decade. I’m sure they will do whatever it takes to keep my business, through TiVo or through suddenLink. After quite some time on hold, I was able to talk to a customer service representative, “Les”. I explained that I am a loyal TiVo customer, but I purchased this deal through my cable provider. I’m still with TiVo, I just wanted a single bill and to take advantage of the pay-over-time option. “Les” told me that he was very sorry to hear that I’m leaving TiVo, to which I responded again that I wasn’t leaving TiVo, I just want one invoice, and to take advantage of the pay-over-time. So, after explaining that I requested a termination of the non-suddenLink account (TiVo can see both of course), I was put on hold again for quite some time while my refund was “approved”.  “Les” said that he could see my cancellation request back in July. Note that it is now November, so they have billed me inappropriately four times. After quite some time, he came back on the line and told me that he was able to “get me most of my money back.” He got approval to refund 90 days. Even though I requested cancellation of one of my accounts, TiVo has that cancellation request on file and they admit overbilling me, I am going to get “most” of my money back. To top this experience off, when we were ready to hang up, “Les” told me that he was sorry to see me go and that he hoped I would come back to TiVo again. Again, I explained to “Les” that I have not left TiVo. I am just paying them through suddenLink. At that point, he went into a small dissertation about how this is a special arrangement they have with suddenLink and very few others. He made me feel like I was doing something wrong. Why should I feel that way? TiVo made the deal with suddenLink, not me, and the deal seemed like a good compromise for me to be able to get what I need. Here is what TiVo Customer Service accomplished on those two calls – I no longer feel like I need to be loyal to the TiVo brand or service. If I had been treated better on these two calls, I would still be recommending TiVo to my friends. They would still be getting revenue from a loyal customer, who paid the same rate for over a decade, and this article wouldn’t be here for you to read. Interesting… In my opinion, if you want brand loyalty, be loyal to your customers!

  Read the article

• How-to populate different select list content per table row

  - by frank.nimphius

  Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A frequent requirement posted on the OTN forum is to render cells of a table column using instances of af:selectOneChoices with each af:selectOneChoice instance showing different list values. To implement this use case, the select list of the table column is populated dynamically from a managed bean for each row. The table's current rendered row object is accessible in the managed bean using the #{row} expression, where "row" is the value added to the table's var property. <af:table var="row">   ...   <af:column ...>     <af:selectOneChoice ...>         <f:selectItems value="#{browseBean.items}"/>     </af:selectOneChoice>   </af:column </af:table> The browseBean managed bean referenced in the code snippet above has a setItems and getItems method defined that is accessible from EL using the #{browseBean.items} expression. When the table renders, then the var property variable - the #{row} reference - is filled with the data object displayed in the current rendered table row. The managed bean getItems method returns a List<SelectItem>, which is the model format expected by the f:selectItems tag to populate the af:selectOneChoice list. public void setItems(ArrayList<SelectItem> items) {} //this method is executed for each table row public ArrayList<SelectItem> getItems() {   FacesContext fctx = FacesContext.getCurrentInstance();   ELContext elctx = fctx.getELContext();   ExpressionFactory efactory =          fctx.getApplication().getExpressionFactory();          ValueExpression ve =          efactory.createValueExpression(elctx, "#{row}", Object.class);      Row rw = (Row) ve.getValue(elctx);         //use one of the row attributes to determine which list to query and   //show in the current af:selectOneChoice list  // ...  ArrayList<SelectItem> alsi = new ArrayList<SelectItem>();  for( ... ){      SelectItem item = new SelectItem();        item.setLabel(...);        item.setValue(...);        alsi.add(item);   }   return alsi;} For better performance, the ADF Faces table stamps it data rows. Stamping means that the cell renderer component - af:selectOneChoice in this example - is instantiated once for the column and then repeatedly used to display the cell data for individual table rows. This however means that you cannot refresh a single select one choice component in a table to change its list values. Instead the whole table needs to be refreshed, rerunning the managed bean list query. Be aware that having individual list values per table row is an expensive operation that should be used only on small tables for Business Services with low latency data fetching (e.g. ADF Business Components and EJB) and with server side caching strategies for the queried data (e.g. storing queried list data in a managed bean in session scope).

  Read the article

• yield – Just yet another sexy c# keyword?

  - by George Mamaladze

  yield (see NSDN c# reference) operator came I guess with .NET 2.0 and I my feeling is that it’s not as wide used as it could (or should) be.   I am not going to talk here about necessarity and advantages of using iterator pattern when accessing custom sequences (just google it).   Let’s look at it from the clean code point of view. Let's see if it really helps us to keep our code understandable, reusable and testable.   Let’s say we want to iterate a tree and do something with it’s nodes, for instance calculate a sum of their values. So the most elegant way would be to build a recursive method performing a classic depth traversal returning the sum.           private int CalculateTreeSum(Node top)         {             int sumOfChildNodes = 0;             foreach (Node childNode in top.ChildNodes)             {                 sumOfChildNodes += CalculateTreeSum(childNode);             }             return top.Value + sumOfChildNodes;         }     “Do One Thing” Nevertheless it violates one of the most important rules “Do One Thing”. Our  method CalculateTreeSum does two things at the same time. It travels inside the tree and performs some computation – in this case calculates sum. Doing two things in one method is definitely a bad thing because of several reasons: ·          Understandability: Readability / refactoring ·          Reuseability: when overriding - no chance to override computation without copying iteration code and vice versa. ·          Testability: you are not able to test computation without constructing the tree and you are not able to test correctness of tree iteration.   I want to spend some more words on this last issue. How do you test the method CalculateTreeSum when it contains two in one: computation & iteration? The only chance is to construct a test tree and assert the result of the method call, in our case the sum against our expectation. And if the test fails you do not know wether was the computation algorithm wrong or was that the iteration? At the end to top it all off I tell you: according to Murphy’s Law the iteration will have a bug as well as the calculation. Both bugs in a combination will cause the sum to be accidentally exactly the same you expect and the test will PASS. J   Ok let’s use yield! That’s why it is generally a very good idea not to mix but isolate “things”. Ok let’s use yield!           private int CalculateTreeSumClean(Node top)         {             IEnumerable<Node> treeNodes = GetTreeNodes(top);             return CalculateSum(treeNodes);         }             private int CalculateSum(IEnumerable<Node> nodes)         {             int sumOfNodes = 0;             foreach (Node node in nodes)             {                 sumOfNodes += node.Value;             }             return sumOfNodes;         }           private IEnumerable<Node> GetTreeNodes(Node top)         {             yield return top;             foreach (Node childNode in top.ChildNodes)             {                 foreach (Node currentNode in GetTreeNodes(childNode))                 {                     yield return currentNode;                 }             }         }   Two methods does not know anything about each other. One contains calculation logic another jut the iteration logic. You can relpace the tree iteration algorithm from depth traversal to breath trevaersal or use stack or visitor pattern instead of recursion. This will not influence your calculation logic. And vice versa you can relace the sum with product or do whatever you want with node values, the calculateion algorithm is not aware of beeng working on some tree or graph.  How about not using yield? Now let’s ask the question – what if we do not have yield operator? The brief look at the generated code gives us an answer. The compiler generates a 150 lines long class to implement the iteration logic.       [CompilerGenerated]     private sealed class <GetTreeNodes>d__0 : IEnumerable<Node>, IEnumerable, IEnumerator<Node>, IEnumerator, IDisposable     {         ...        150 Lines of generated code        ...     }   Often we compromise code readability, cleanness, testability, etc. – to reduce number of classes, code lines, keystrokes and mouse clicks. This is the human nature - we are lazy. Knowing and using such a sexy construct like yield, allows us to be lazy, write very few lines of code and at the same time stay clean and do one thing in a method. That's why I generally welcome using staff like that.   Note: The above used recursive depth traversal algorithm is possibly the compact one but not the best one from the performance and memory utilization point of view. It was taken to emphasize on other primary aspects of this post.

  Read the article

• SQL SERVER – ?Finding Out What Changed in a Deleted Database – Notes from the Field #041

  - by Pinal Dave

  [Note from Pinal]: This is a 41th episode of Notes from the Field series. The real world is full of challenges. When we are reading theory or book, we sometimes do not realize how real world reacts works and that is why we have the series notes from the field, which is extremely popular with developers and DBA. Let us talk about interesting problem of how to figure out what has changed in the DELETED database. Well, you think I am just throwing the words but in reality this kind of problems are making our DBA’s life interesting and in this blog post we have amazing story from Brian Kelley about the same subject. In this episode of the Notes from the Field series database expert Brian Kelley explains a how to find out what has changed in deleted database. Read the experience of Brian in his own words. Sometimes, one of the hardest questions to answer is, “What changed?” A similar question is, “Did anything change other than what we expected to change?” The First Place to Check – Schema Changes History Report: Pinal has recently written on the Schema Changes History report and its requirement for the Default Trace to be enabled. This is always the first place I look when I am trying to answer these questions. There are a couple of obvious limitations with the Schema Changes History report. First, while it reports what changed, when it changed, and who changed it, other than the base DDL operation (CREATE, ALTER, DELETE), it does not present what the changes actually were. This is not something covered by the default trace. Second, the default trace has a fixed size. When it hits that size, the changes begin to overwrite. As a result, if you wait too long, especially on a busy database server, you may find your changes rolled off. But the Database Has Been Deleted! Pinal cited another issue, and that’s the inability to run the Schema Changes History report if the database has been dropped. Thankfully, all is not lost. One thing to remember is that the Schema Changes History report is ultimately driven by the Default Trace. As you may have guess, it’s a trace, like any other database trace. And the Default Trace does write to disk. The trace files are written to the defined LOG directory for that SQL Server instance and have a prefix of log_: Therefore, you can read the trace files like any other. Tip: Copy the files to a working directory. Otherwise, you may occasionally receive a file in use error. With the Default Trace files, if you ask the question early enough, you can see the information for a deleted database just the same as any other database. Testing with a Deleted Database: Here’s a short script that will create a database, create a schema, create an object, and then drop the database. Without the database, you can’t do a standard Schema Changes History report. CREATE DATABASE DeleteMe; GO USE DeleteMe; GO CREATE SCHEMA Test AUTHORIZATION dbo; GO CREATE TABLE Test.Foo (FooID INT); GO USE MASTER; GO DROP DATABASE DeleteMe; GO This sets up the perfect situation where we can’t retrieve the information using the Schema Changes History report but where it’s still available. Finding the Information: I’ve sorted the columns so I can see the Event Subclass, the Start Time, the Database Name, the Object Name, and the Object Type at the front, but otherwise, I’m just looking at the trace files using SQL Profiler. As you can see, the information is definitely there: Therefore, even in the case of a dropped/deleted database, you can still determine who did what and when. You can even determine who dropped the database (loginame is captured). The key is to get the default trace files in a timely manner in order to extract the information. If you want to get started with performance tuning and database security with the help of experts, read more over at Fix Your SQL Server. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Query, SQL Security, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Solaris 11.2: Functional Deprecation

  - by alanc

  In Solaris 11.1, I updated the system headers to enable use of several attributes on functions, including noreturn and printf format, to give compilers and static analyzers more information about how they are used to give better warnings when building code. In Solaris 11.2, I've gone back in and added one more attribute to a number of functions in the system headers: __attribute__((__deprecated__)). This is used to warn people building software that they’re using function calls we recommend no longer be used. While in many cases the Solaris Binary Compatibility Guarantee means we won't ever remove these functions from the system libraries, we still want to discourage their use. I made passes through both the POSIX and C standards, and some of the Solaris architecture review cases to come up with an initial list which the Solaris architecture review committee accepted to start with. This set is by no means a complete list of Obsolete function interfaces, but should be a reasonable start at functions that are well documented as deprecated and seem useful to warn developers away from. More functions may be flagged in the future as they get deprecated, or if further passes are made through our existing deprecated functions to flag more of them. Header Interface Deprecated by Alternative Documented in <door.h> door_cred(3C) PSARC/2002/188 door_ucred(3C) door_cred(3C) <kvm.h> kvm_read(3KVM), kvm_write(3KVM) PSARC/1995/186 Functions on kvm_kread(3KVM) man page kvm_read(3KVM) <stdio.h> gets(3C) ISO C99 TC3 (Removed in ISO C11), POSIX:2008/XPG7/Unix08 fgets(3C) gets(3C) man page, and just about every gets(3C) reference online from the past 25 years, since the Morris worm proved bad things happen when it’s used. <unistd.h> vfork(2) PSARC/2004/760, POSIX:2001/XPG6/Unix03 (Removed in POSIX:2008/XPG7/Unix08) posix_spawn(3C) vfork(2) man page. <utmp.h> All functions from getutent(3C) man page PSARC/1999/103 utmpx functions from getutentx(3C) man page getutent(3C) man page <varargs.h> varargs.h version of va_list typedef ANSI/ISO C89 standard <stdarg.h> varargs(3EXT) <volmgt.h> All functions PSARC/2005/672 hal(5) API volmgt_check(3VOLMGT), etc. <sys/nvpair.h> nvlist_add_boolean(3NVPAIR), nvlist_lookup_boolean(3NVPAIR) PSARC/2003/587 nvlist_add_boolean_value, nvlist_lookup_boolean_value nvlist_add_boolean(3NVPAIR) & (9F), nvlist_lookup_boolean(3NVPAIR) & (9F). <sys/processor.h> gethomelgroup(3C) PSARC/2003/034 lgrp_home(3LGRP) gethomelgroup(3C) <sys/stat_impl.h> _fxstat, _xstat, _lxstat, _xmknod PSARC/2009/657 stat(2) old functions are undocumented remains of SVR3/COFF compatibility support If the above table is cut off when viewing in the blog, try viewing this standalone copy of the table. To See or Not To See To see these warnings, you will need to be building with either gcc (versions 3.4, 4.5, 4.7, & 4.8 are available in the 11.2 package repo), or with Oracle Solaris Studio 12.4 or later (which like Solaris 11.2, is currently in beta testing). For instance, take this oversimplified (and obviously buggy) implementation of the cat command: #include <stdio.h> int main(int argc, char **argv) { char buf[80]; while (gets(buf) != NULL) puts(buf); return 0; } Compiling it with the Studio 12.4 beta compiler will produce warnings such as: % cc -V cc: Sun C 5.13 SunOS_i386 Beta 2014/03/11 % cc gets_test.c "gets_test.c", line 6: warning: "gets" is deprecated, declared in : "/usr/include/iso/stdio_iso.h", line 221 The exact warning given varies by compilers, and the compilers also have a variety of flags to either raise the warnings to errors, or silence them. Of couse, the exact form of the output is Not An Interface that can be relied on for automated parsing, just shown for example. gets(3C) is actually a special case — as noted above, it is no longer part of the C Standard Library in the C11 standard, so when compiling in C11 mode (i.e. when __STDC_VERSION__ >= 201112L), the <stdio.h> header will not provide a prototype for it, causing the compiler to complain it is unknown: % gcc -std=c11 gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: warning: implicit declaration of function ‘gets’ [-Wimplicit-function-declaration] while (gets(buf) != NULL) ^ The gets(3C) function of course is still in libc, so if you ignore the error or provide your own prototype, you can still build code that calls it, you just have to acknowledge you’re taking on the risk of doing so yourself. Solaris Studio 12.4 Beta % cc gets_test.c "gets_test.c", line 6: warning: "gets" is deprecated, declared in : "/usr/include/iso/stdio_iso.h", line 221 % cc -errwarn=E_DEPRECATED_ATT gets_test.c "gets_test.c", line 6: "gets" is deprecated, declared in : "/usr/include/iso/stdio_iso.h", line 221 cc: acomp failed for gets_test.c This warning is silenced in the 12.4 beta by cc -erroff=E_DEPRECATED_ATT No warning is currently issued by Studio 12.3 & earler releases. gcc 3.4.3 % /usr/sfw/bin/gcc gets_test.c gets_test.c: In function `main': gets_test.c:6: warning: `gets' is deprecated (declared at /usr/include/iso/stdio_iso.h:221) Warning is completely silenced with gcc -Wno-deprecated-declarations gcc 4.7.3 % /usr/gcc/4.7/bin/gcc gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: warning: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Wdeprecated-declarations] % /usr/gcc/4.7/bin/gcc -Werror=deprecated-declarations gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: error: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Werror=deprecated-declarations] cc1: some warnings being treated as errors Warning is completely silenced with gcc -Wno-deprecated-declarations gcc 4.8.2 % /usr/bin/gcc gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: warning: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Wdeprecated-declarations] while (gets(buf) != NULL) ^ % /usr/bin/gcc -Werror=deprecated-declarations gets_test.c gets_test.c: In function ‘main’: gets_test.c:6:5: error: ‘gets’ is deprecated (declared at /usr/include/iso/stdio_iso.h:221) [-Werror=deprecated-declarations] while (gets(buf) != NULL) ^ cc1: some warnings being treated as errors Warning is completely silenced with gcc -Wno-deprecated-declarations

  Read the article

• Training a 'replacement', how to enforce standards?

  - by Mohgeroth

  Not sure that this is the right stack exchange site to ask this of, but here goes... Scope I work for a small company that employs a few hundred people. The development team for the company is small and works out of visual foxpro. A specific department in the company hired me in as a 'lone gunman' to fix and enhance a pre-existing invoicing system. I've successfully taken an Access application that suffered from a lot of risks and limitations and converted it into a C# application driven off of a SQL server backend. I have recently obtained my undergraduate and am no expert by any means. To help make up for that I've felt that earning microsoft certifications will force me to understand more about .net and how it functions. So, after giving my notice with 9 months in advance, 3 months ago a replacement finally showed up. Their role is to learn what I have been designing to an attempt to support the applications designed in C#. The Replacement Fresh out of college with no real-world work experience, the first instinct for anything involving data was and still is listboxes... any time data is mentioned the list box is the control of choice for the replacement. This has gotten to the point, no matter how many times I discuss other controls, where I've seen 5 listboxes on a single form. Classroom experience was almost all C++ console development. So, an example of where I have concern is in a winforms application: Users need to key Reasons into a table to select from later. Given that I know that a strongly typed data set exists, I can just drag the data source from the toolbox and it would create all of this for me. I realize this is a simple example but using databinding is the key. For the past few months now we have been talking about the strongly typed dataset, how to use it and where it interacts with other controls. Data sets, how they work in relation to binding sources, adapters and data grid views. After handing this project off I expected questions about how to implement these since for me this is the way to do it. What happened next simply floors me: An instance of an adapter from the strongly typed dataset was created in the activate event of the form, a table was created and filled with data. Then, a loop was made to manually add rows to a listbox from this table. Finally, a variable was kept to do lookups to figure out what ID the record was for updates if required. How do they modify records you ask? That was my first question too. You won't believe how simple it is, all you do it double click and they type into a pop-up prompt the new value to change it to. As a data entry operator, all the modal popups would drive me absolutely insane. The final solution exceeds 100 lines of code that must be maintained. So my concern is that none of this is sinking in... the department is only allowed 20 hours a week of their time. Up until last week, we've only been given 4-5 hours a week if I'm lucky. The past week or so, I've been lucky to get 10. Question WHAT DO I DO?! I have 4 weeks left until I leave and they fully 'support' this application. I love this job and the opportunity it has given me but it's time for me to spread my wings and find something new. I am in no way, shape or form convinced that they are ready to take over. I do feel that the replacement has the technical ability to 'figure it out' but instead of learning they just write code to do all of this stuff manually. If the replacement wants to code differently in the end, as long as it works I'm fine with that as horrifiying at it looks. However to support what I have designed they MUST to understand how it works and how I have used controls and the framework to make 'magic' happen. This project has about 40 forms, a database with over 30 some odd tables, triggers and stored procedures. It relates labor to invoices to contracts to projections... it's not as simple as it was three years ago when I began this project and the department is now in a position where they cannot survive without it. How in the world can I accomplish any of the following?: Enforce standards or understanding in constent design when the department manager keeps telling them they can do it however they want to Find a way to engage the replacement in active learning of the framework and system design that support must be given for Gracefully inform sr. management that 5-9 hours a week is simply not enough time to learn about the department, pre-existing processes, applications that need to be supported AND determine where potential enhancements to the system go... Yes I know this is a wall of text, thanks for reading through me but I simply don't know what I should be doing. For me, this job is a monster of a reference and things would look extremely bad if I left and things fell apart. How do I handle this?

  Read the article

• T-SQL Tuesday #34: Help! I Need Somebody!

  - by Most Valuable Yak (Rob Volk)

  Welcome everyone to T-SQL Tuesday Episode 34!  When last we tuned in, Mike Fal (b|t) hosted Trick Shots.  These highlighted techniques or tricks that you figured out on your own which helped you understand SQL Server better. This month, I'm asking you to look back this past week, year, century, or hour...to a time when you COULDN'T figure it out.  When you were stuck on a SQL Server problem and you had to seek help. In the beginning... SQL Server has changed a lot since I started with it.  <Cranky Old Guy> Back in my day, Books Online was neither.  There were no blogs. Google was the third-place search site. There were perhaps two or three community forums where you could ask questions.  (Besides the Microsoft newsgroups...which you had to access with Usenet.  And endure the wrath of...Celko.)  Your "training" was reading a book, made from real dead trees, that you bought from your choice of brick-and-mortar bookstore. And except for your local user groups, there were no conferences, seminars, SQL Saturdays, or any online video hookups where you could interact with a person. You'd have to call Microsoft Support...on the phone...a LANDLINE phone.  And none of this "SQL Family" business!</Cranky Old Guy> Even now, with all these excellent resources available, it's still daunting for a beginner to seek help for SQL Server.  The product is roughly 1247.4523 times larger than it was 15 years ago, and it's simply impossible to know everything about it.*  So whether you are a beginner, or a seasoned pro of over a decade's experience, what do you do when you need help on SQL Server? That's so meta... In the spirit of offering help, here are some suggestions for your topic: Tell us about a person or SQL Server community who have been helpful to you.  It can be about a technical problem, or not, e.g. someone who volunteered for your local SQL Saturday.  Sing their praises!  Let the world know who they are! Do you have any tricks for using Books Online?  Do you use the locally installed product, or are you completely online with BOL/MSDN/Technet, and why? If you've been using SQL Server for over 10 years, how has your help-seeking changed? Are you using Twitter, StackOverflow, MSDN Forums, or another resource that didn't exist when you started? What made you switch? Do you spend more time helping others than seeking help? What motivates you to help, and how do you contribute? Structure your post along the lyrics to The Beatles song Help! Audio or video renditions are particularly welcome! Lyrics must include reference to SQL Server terminology or community, and performances must be in your voice or include you playing an instrument. These are just suggestions, you are free to write whatever you like.  Bonus points if you can incorporate ALL of these into a single post.  (Or you can do multiple posts, we're flexible like that.)  Help us help others by showing how others helped you! Legalese, Your Rights, Yada yada... If you would like to participate in T-SQL Tuesday please be sure to follow the rules below: Your blog post must be published between Tuesday, September 11, 2012 00:00:00 GMT and Wednesday, September 12, 2012 00:00:00 GMT. Include the T-SQL Tuesday logo (above) and hyperlink it back to this post. If you don’t see your post in trackbacks, add the link to the comments below. If you are on Twitter please tweet your blog using the #TSQL2sDay hashtag.  I can be contacted there as @sql_r, in case you have questions or problems with comments/trackback.  I'll have a follow-up post listing all the contributions as soon as I can. Thank you all for participating, and special thanks to Adam Machanic (b|t) for all his help and for continuing this series!

  Read the article

• Is Data Science “Science”?

  - by BuckWoody

  I hold the term “science” in very high esteem. I grew up on the Space Coast in Florida, and eventually worked at the Kennedy Space Center, surrounded by very intelligent people who worked in various scientific fields. Recently a new term has entered the computing dialog – “Data Scientist”. Since it’s not a standard term, it has a lot of definitions, and in fact has been disputed as a correct term. After all, the reasoning goes, if there’s no such thing as “Data Science” then how can there be a Data Scientist? This argument has been made before, albeit with a different term – “Computer Science”. In Peter Denning’s excellent article “Is Computer Science Science” (April  2005/Vol. 48, No. 4 COMMUNICATIONS OF THE ACM) there are many points that separate “science” from “engineering” and even “art”.  I won’t repeat the content of that article here (I recommend you read it on your own) but will leverage the points he makes there. Definition of Science To ask the question “is data science ‘science’” then we need to start with a definition of terms. Various references put the definition into the same basic areas: Study of the physical world Systematic and/or disciplined study of a subject area ...and then they include the things studied, the bodies of knowledge and so on. The word itself comes from Latin, and means merely “to know” or “to study to know”. Greek divides knowledge further into “truth” (episteme), and practical use or effects (tekhne). Normally computing falls into the second realm. Definition of Data Science And now a more controversial definition: Data Science. This term is so new and perhaps so niche that the major dictionaries haven’t yet picked it up (my OED reference is older – can’t afford to pop for the online registration at present). Researching the term's general use I created an amalgam of the definitions this way: “Studying and applying mathematical and other techniques to derive information from complex data sets.” Using this definition, data science certainly seems to be science - it's learning about and studying some object or area using systematic methods. But implicit within the definition is the word “application”, which makes the process more akin to engineering or even technology than science. In fact, I find that using these techniques – and data itself – part of science, not science itself. I leave out the concept of studying data patterns or algorithms as part of this discipline. That is actually a domain I see within research, mathematics or computer science. That of course is a type of science, but does not seek for practical applications. As part of the argument against calling it “Data Science”, some point to the scientific method of creating a hypothesis, testing with controls, testing results against the hypothesis, and documenting for repeatability.  These are not steps that we often take in working with data. We normally start with a question, and fit patterns and algorithms to predict outcomes and find correlations. In this way Data Science is more akin to statistics (and in fact makes heavy use of them) in the process rather than starting with an assumption and following on with it. So, is Data Science “Science”? I’m uncertain – and I’m uncertain it matters. Even if we are facing rampant “title inflation” these days (does anyone introduce themselves as a secretary or supervisor anymore?) I can tolerate the term at least from the intent that we use data to study problems across a wide spectrum, rather than restricting it to a single domain. And I also understand those who have worked hard to achieve the very honorable title of “scientist” who have issues with those who borrow the term without asking. What do you think? Science, or not? Does it matter?

  Read the article

• Jersey 2 in GlassFish 4 - First Java EE 7 Implementation Now Integrated (TOTD #182)

  - by arungupta

  The JAX-RS 2.0 specification released their Early Draft 3 recently. One of my earlier blogs explained as the features were first introduced in the very first draft of the JAX-RS 2.0 specification. Last week was another milestone when the first Java EE 7 specification implementation was added to GlassFish 4 builds. Jakub blogged about Jersey 2 integration in GlassFish 4 builds. Most of the basic functionality is working but EJB, CDI, and Validation are still a TBD. Here is a simple Tip Of The Day (TOTD) sample to get you started with using that functionality. Create a Java EE 6-style Maven project mvn archetype:generate -DarchetypeGroupId=org.codehaus.mojo.archetypes -DarchetypeArtifactId=webapp-javaee6 -DgroupId=example -DartifactId=jersey2-helloworld -DarchetypeVersion=1.5 -DinteractiveMode=false Note, this is still a Java EE 6 archetype, at least for now. Open the project in NetBeans IDE as it makes it much easier to edit/add the files. Add the following <respositories> <repositories> <repository> <id>snapshot-repository.java.net</id> <name>Java.net Snapshot Repository for Maven</name> <url>https://maven.java.net/content/repositories/snapshots/</url> <layout>default</layout> </repository></repositories> Add the following <dependency>s <dependency> <groupId>junit</groupId> <artifactId>junit</artifactId> <version>4.10</version> <scope>test</scope></dependency><dependency> <groupId>javax.ws.rs</groupId> <artifactId>javax.ws.rs-api</artifactId> <version>2.0-m09</version> <scope>test</scope></dependency><dependency> <groupId>org.glassfish.jersey.core</groupId> <artifactId>jersey-client</artifactId> <version>2.0-m05</version> <scope>test</scope></dependency> The complete list of Maven coordinates for Jersey2 are available here. An up-to-date status of Jersey 2 can always be obtained from here. Here is a simple resource class: @Path("movies")public class MoviesResource { @GET @Path("list") public List<Movie> getMovies() { List<Movie> movies = new ArrayList<Movie>(); movies.add(new Movie("Million Dollar Baby", "Hillary Swank")); movies.add(new Movie("Toy Story", "Buzz Light Year")); movies.add(new Movie("Hunger Games", "Jennifer Lawrence")); return movies; }} This resource publishes a list of movies and is accessible at "movies/list" path with HTTP GET. The project is using the standard JAX-RS APIs. Of course, you need the trivial "Movie" and the "Application" class as well. They are available in the downloadable project anyway. Build the project mvn package And deploy to GlassFish 4.0 promoted build 43 (download, unzip, and start as "bin/asadmin start-domain") as asadmin deploy --force=true target/jersey2-helloworld.war Add a simple test case by right-clicking on the MoviesResource class, select "Tools", "Create Tests", and take defaults. Replace the function "testGetMovies" to @Testpublic void testGetMovies() { System.out.println("getMovies"); Client client = ClientFactory.newClient(); List<Movie> movieList = client.target("http://localhost:8080/jersey2-helloworld/webresources/movies/list") .request() .get(new GenericType<List<Movie>>() {}); assertEquals(3, movieList.size());} This test uses the newly defined JAX-RS 2 client APIs to access the RESTful resource. Run the test by giving the command "mvn test" and see the output as ------------------------------------------------------- T E S T S-------------------------------------------------------Running example.MoviesResourceTestgetMoviesTests run: 1, Failures: 0, Errors: 0, Skipped: 0, Time elapsed: 0.561 secResults :Tests run: 1, Failures: 0, Errors: 0, Skipped: 0 GlassFish 4 contains Jersey 2 as the JAX-RS implementation. If you want to use Jersey 1.1 functionality, then Martin's blog provide more details on that. All JAX-RS 1.x functionality will be supported using standard APIs anyway. This workaround is only required if Jersey 1.x functionality needs to be accessed. The complete source code explained in this project can be downloaded from here. Here are some pointers to follow JAX-RS 2 Specification Early Draft 3 Latest status on specification (jax-rs-spec.java.net) Latest JAX-RS 2.0 Javadocs Latest status on Jersey (Reference Implementation of JAX-RS 2 - jersey.java.net) Latest Jersey API Javadocs Latest GlassFish 4.0 Promoted Build Follow @gf_jersey Provide feedback on Jersey 2 to [email protected] and JAX-RS specification to [email protected].

  Read the article

• Centered Content using panelGridLayout

  - by Duncan Mills

  A classic layout conundrum,  which I think pretty much every ADF developer may have faced at some time or other, is that of truly centered (centred) layout. Typically this requirement comes up in relation to say displaying a login type screen or similar. Superficially the  problem seems easy, but as my buddy Eduardo explained when discussing this subject a couple of years ago it's actually a little more complex than you might have thought. If fact, even the "solution" provided in that posting is not perfect and suffers from a several issues (not Eduardo's fault, just limitations of panelStretch!) The top, bottom, end and start facets all need something in them The percentages you apply to the topHeight, startWidth etc. are calculated as part of the whole width.  This means that you have to guestimate the correct percentage based on your typical screen size and the sizing of the centered content. So, at best, you will in fact only get approximate centering, and the more you tune that centering for a particular browser size the more it will fail if the user resizes. You can't attach styles to the panelStretchLayout facets so to provide things like background color or fixed sizing you need to embed another container that you can apply styles to, typically a panelgroupLayout   For reference here's the code to print a simple 100px x 100px red centered square  using the panelStretchLayout solution, approximately tuned to a 1980 x 1080 maximized browser (IDs omitted for brevity): <af:panelStretchLayout startWidth="45%" endWidth="45%"                        topHeight="45%"  bottomHeight="45%" >   <f:facet name="center">     <af:panelGroupLayout inlineStyle="height:100px;width:100px;background-color:red;"                          layout="vertical"/>   </f:facet>   <f:facet name="top">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="bottom">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="start">     <af:spacer height="1" width="1"/>   </f:facet>   <f:facet name="end">     <af:spacer height="1" width="1"/>    </f:facet> </af:panelStretchLayout>  And so to panelGridLayout  So here's the  good news, panelGridLayout makes this really easy and it works without the caveats above.  The key point is that percentages used in the grid definition are evaluated after the fixed sizes are taken into account, so rather than having to guestimate what percentage will "more, or less", center the content you can just say "allocate half of what's left" to the flexible content and you're done. Here's the same example using panelGridLayout: <af:panelGridLayout> <af:gridRow height="50%"/> <af:gridRow height="100px"> <af:gridCell width="50%" /> <af:gridCell width="100px" halign="stretch" valign="stretch"  inlineStyle="background-color:red;"> <af:spacer width="1" height="1"/> </af:gridCell> <af:gridCell width="50%" /> </af:gridRow> <af:gridRow height="50%"/> </af:panelGridLayout>  So you can see that the amount of markup is somewhat smaller (as is, I should mention, the generated DOM structure in the browser), mainly because we don't need to introduce artificial components to ensure that facets are actually observed in the final result.  But the key thing here is that the centering is no longer approximate and it will work as expected as the user resizes the browser screen.  By far this is a more satisfactory solution and although it's only a simple example, it will hopefully open your eyes to the potential of panelGridLayout as your number one, go-to layout container. Just a reminder though, right now, panelGridLayout is only available in 11.1.2.2 and above.

  Read the article

• Code refactoring with Visual Studio 2010 Part-4

  - by Jalpesh P. Vadgama

  I have been writing few post with code refactoring features in Visual Studio 2010. This post also will be part of series and this post will be last of the series. In this post I am going explain two features 1) Encapsulate Field and 2) Extract Interface. Let’s explore both features in details. Encapsulate Field: This is a nice code refactoring feature provides by Visual Studio 2010. With help of this feature we can create properties from the existing private field of the class. Let’s take a simple example of Customer Class. In that I there are two private field called firstName and lastName. Below is the code for the class. public class Customer { private string firstName; private string lastName; public string Address { get; set; } public string City { get; set; } } Now lets encapsulate first field firstName with Encapsulate feature. So first select that field and goto refactor menu in Visual Studio 2010 and click on Encapsulate Field. Once you click that a dialog box will appear like following. Now once you click OK a preview dialog box will open as we have selected preview reference changes. I think its a good options to check that option to preview code that is being changed by IDE itself. Dialog will look like following. Once you click apply it create a new property called FirstName. Same way I have done for the lastName and now my customer class code look like following. public class Customer { private string firstName; public string FirstName { get { return firstName; } set { firstName = value; } } private string lastName; public string LastName { get { return lastName; } set { lastName = value; } } public string Address { get; set; } public string City { get; set; } } So you can see that its very easy to create properties with existing fields and you don’t have to change anything there in code it will change all the stuff itself. Extract Interface: When you are writing software prototype and You don’t know the future implementation of that then its a good practice to use interface there. I am going to explain here that How we can extract interface from the existing code without writing a single line of code with the help of code refactoring feature of Visual Studio 2010. For that I have create a Simple Repository class called CustomerRepository with three methods like following. public class CustomerRespository { public void Add() { // Some code to add customer } public void Update() { //some code to update customer } public void Delete() { //some code delete customer } } In above class there are three method Add,Update and Delete where we are going to implement some code for each one. Now I want to create a interface which I can use for my other entities in project. So let’s create a interface from the above class with the help of Visual Studio 2010. So first select class and goto refactor menu and click Extract Interface. It will open up dialog box like following. Here I have selected all the method for interface and Once I click OK then it will create a new file called ICustomerRespository where it has created a interface. Just like following. Here is a code for that interface. using System; namespace CodeRefractoring { interface ICustomerRespository { void Add(); void Delete(); void Update(); } } Now let's see the code for the our class. It will also changed like following to implement the interface. public class CustomerRespository : ICustomerRespository { public void Add() { // Some code to add customer } public void Update() { //some code to update customer } public void Delete() { //some code delete customer } } Isn't that great we have created a interface and implemented it without writing a single line of code. Hope you liked it. Stay tuned for more.. Till that Happy Programming.

  Read the article

• Breaking 1NF to model subset constraints. Does this sound sane?

  - by Chris Travers

  My first question here. Appologize if it is in the wrong forum but this seems pretty conceptual. I am looking at doing something that goes against conventional wisdom and want to get some feedback as to whether this is totally insane or will result in problems, so critique away! I am on PostgreSQL 9.1 but may be moving to 9.2 for this part of this project. To re-iterate: Does it seem sane to break 1NF in this way? I am not looking for debugging code so much as where people see problems that this might lead. The Problem In double entry accounting, financial transactions are journal entries with an arbitrary number of lines. Each line has either a left value (debit) or a right value (credit) which can be modelled as a single value with negatives as debits and positives as credits or vice versa. The sum of all debits and credits must equal zero (so if we go with a single amount field, sum(amount) must equal zero for each financial journal entry). SQL-based databases, pretty much required for this sort of work, have no way to express this sort of constraint natively and so any approach to enforcing it in the database seems rather complex. The Write Model The journal entries are append only. There is a possibility we will add a delete model but it will be subject to a different set of restrictions and so is not applicable here. If and when we allow deletes, we will probably do them using a simple ON DELETE CASCADE designation on the foreign key, and require that deletes go through a dedicated stored procedure which can enforce the other constraints. So inserts and selects have to be accommodated but updates and deletes do not for this task. My Proposed Solution My proposed solution is to break first normal form and model constraints on arrays of tuples, with a trigger that breaks the rows out into another table. CREATE TABLE journal_line ( entry_id bigserial primary key, account_id int not null references account(id), journal_entry_id bigint not null, -- adding references later amount numeric not null ); I would then add "table methods" to extract debits and credits for reporting purposes: CREATE OR REPLACE FUNCTION debits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount < 0 THEN $1.amount * -1 ELSE NULL END; $$; CREATE OR REPLACE FUNCTION credits(journal_line) RETURNS numeric LANGUAGE sql IMMUTABLE AS $$ SELECT CASE WHEN $1.amount > 0 THEN $1.amount ELSE NULL END; $$; Then the journal entry table (simplified for this example): CREATE TABLE journal_entry ( entry_id bigserial primary key, -- no natural keys :-( journal_id int not null references journal(id), date_posted date not null, reference text not null, description text not null, journal_lines journal_line[] not null ); Then a table method and and check constraints: CREATE OR REPLACE FUNCTION running_total(journal_entry) returns numeric language sql immutable as $$ SELECT sum(amount) FROM unnest($1.journal_lines); $$; ALTER TABLE journal_entry ADD CONSTRAINT CHECK (((journal_entry.running_total) = 0)); ALTER TABLE journal_line ADD FOREIGN KEY journal_entry_id REFERENCES journal_entry(entry_id); And finally we'd have a breakout trigger: CREATE OR REPLACE FUNCTION je_breakout() RETURNS TRIGGER LANGUAGE PLPGSQL AS $$ BEGIN IF TG_OP = 'INSERT' THEN INSERT INTO journal_line (journal_entry_id, account_id, amount) SELECT NEW.id, account_id, amount FROM unnest(NEW.journal_lines); RETURN NEW; ELSE RAISE EXCEPTION 'Operation Not Allowed'; END IF; END; $$; And finally CREATE TRIGGER AFTER INSERT OR UPDATE OR DELETE ON journal_entry FOR EACH ROW EXECUTE_PROCEDURE je_breaout(); Of course the example above is simplified. There will be a status table that will track approval status allowing for separation of duties, etc. However the goal here is to prevent unbalanced transactions. Any feedback? Does this sound entirely insane? Standard Solutions? In getting to this point I have to say I have looked at four different current ERP solutions to this problems: Represent every line item as a debit and a credit against different accounts. Use of foreign keys against the line item table to enforce an eventual running total of 0 Use of constraint triggers in PostgreSQL Forcing all validation here solely through the app logic. My concerns are that #1 is pretty limiting and very hard to audit internally. It's not programmer transparent and so it strikes me as being difficult to work with in the future. The second strikes me as being very complex and required a series of contraints and foreign keys against self to make work, and therefore it strikes me as complex, hard to sort out at least in my mind, and thus hard to work with. The fourth could be done as we force all access through stored procedures anyway and this is the most common solution (have the app total things up and throw an error otherwise). However, I think proof that a constraint is followed is superior to test cases, and so the question becomes whether this in fact generates insert anomilies rather than solving them. If this is a solved problem it isn't the case that everyone agrees on the solution....

  Read the article

• Upgrading to Code Based Migrations EF 4.3.1 with Connector/Net 6.6

  - by GABMARTINEZ

  Entity Framework 4.3.1 includes a new feature called code first migrations.  We are adding support for this feature in our upcoming 6.6 release of Connector/Net.  In this walk-through we'll see the workflow of code-based migrations when you have an existing application and you would like to upgrade to this EF 4.3.1 version and use this approach, so you can keep track of the changes that you do to your database.   The first thing we need to do is add the new Entity Framework 4.3.1 package to our application. This should via the NuGet package manager.  You can read more about why EF is not part of the .NET framework here. Adding EF 4.3.1 to our existing application  Inside VS 2010 go to Tools -> Library Package Manager -> Package Manager Console, this will open the Power Shell Host Window where we can work with all the EF commands. In order to install this library to your existing application you should type Install-Package EntityFramework This will make some changes to your application. So Let's check them. In your .config file you'll see a  <configSections> which contains the version you have from EntityFramework and also was added the <entityFramework> section as shown below. This section is by default configured to use SQL Express which won't be necesary for this case. So you can comment it out or leave it empty. Also please make sure you're using the Connector/Net 6.6.x version which is the one that has this support as is shown in the previous image. At this point we face one issue; in order to be able to work with Migrations we need the __MigrationHistory table that we don't have yet since our Database was created with an older version. This table is used to keep track of the changes in our model. So we need to get it in our existing Database. Getting a Migration-History table into an existing database First thing we need to do to enable migrations in our existing application is to create our configuration class which will set up the MySqlClient Provider as our SQL Generator. So we have to add it with the following code: using System.Data.Entity.Migrations;     //add this at the top of your cs file public class Configuration : DbMigrationsConfiguration<NameOfYourDbContext>  //Make sure to use the name of your existing DBContext { public Configuration() { this.AutomaticMigrationsEnabled = false; //Set Automatic migrations to false since we'll be applying the migrations manually for this case. SetSqlGenerator("MySql.Data.MySqlClient", new MySql.Data.Entity.MySqlMigrationSqlGenerator());     }   }  This code will set up our configuration that we'll be using when executing all the migrations for our application. Once we have done this we can Build our application so we can check that everything is fine. Creating our Initial Migration Now let's add our Initial Migration. In Package Manager Console, execute "add-migration InitialCreate", you can use any other name but I like to set this as our initial create for future reference. After we run this command, some changes were done in our application: A new Migrations Folder was created. A new class migration call InitialCreate which in most of the cases should have empty Up and Down methods as long as your database is up to date with your Model. Since all your entities already exists, delete all duplicated code to create any entity which exists already in your Database if there is any. I found this easier when you don't have any pending updates to do to your database. Now we have our empty migration that will make no changes in our database and represents how are all the things at the begining of our migrations.  Finally, let's create our MigrationsHistory table. Optionally you can add SQL code to delete the edmdata table which is not needed anymore. public override void Up() { // Just make sure that you used 4.1 or later version         Sql("DROP TABLE EdmMetadata"); } From our Package Manager Console let's type: Update-database; If you like to see the operations made on each Update-database command you can use the flag -verbose after the Update-database. This will make two important changes.  It will execute the Up method in the initial migration which has no changes in the database. And second, and very important,  it will create the __MigrationHistory table necessary to keep track of your changes. And next time you make a change to your database it will compare the current model to the one stored in the Model Column of this table. Conclusion The important thing of this walk through is that we must create our initial migration before we start doing any changes to our model. This way we'll be adding the necessary __MigrationsHistory table to our existing database, so we can keep our database up to date with all the changes we do in our context model using migrations. Hope you have found this information useful. Please let us know if you have any questions or comments, also please check our forums here where we keep answering questions in general for the community.  Happy MySQL/Net Coding!

  Read the article

• SQL SERVER – Backing Up and Recovering the Tail End of a Transaction Log – Notes from the Field #042

  - by Pinal Dave

  [Notes from Pinal]: The biggest challenge which people face is not taking backup, but the biggest challenge is to restore a backup successfully. I have seen so many different examples where users have failed to restore their database because they made some mistake while they take backup and were not aware of the same. Tail Log backup was such an issue in earlier version of SQL Server but in the latest version of SQL Server, Microsoft team has fixed the confusion with additional information on the backup and restore screen itself. Now they have additional information, there are a few more people confused as they have no clue about this. Previously they did not find this as a issue and now they are finding tail log as a new learning. Linchpin People are database coaches and wellness experts for a data driven world. In this 42nd episode of the Notes from the Fields series database expert Tim Radney (partner at Linchpin People) explains in a very simple words, Backing Up and Recovering the Tail End of a Transaction Log. Many times when restoring a database over an existing database SQL Server will warn you about needing to make a tail end of the log backup. This might be your reminder that you have to choose to overwrite the database or could be your reminder that you are about to write over and lose any transactions since the last transaction log backup. You might be asking yourself “What is the tail end of the transaction log”. The tail end of the transaction log is simply any committed transactions that have occurred since the last transaction log backup. This is a very crucial part of a recovery strategy if you are lucky enough to be able to capture this part of the log. Most organizations have chosen to accept some amount of data loss. You might be shaking your head at this statement however if your organization is taking transaction logs backup every 15 minutes, then your potential risk of data loss is up to 15 minutes. Depending on the extent of the issue causing you to have to perform a restore, you may or may not have access to the transaction log (LDF) to be able to back up those vital transactions. For example, if the storage array or disk that holds your transaction log file becomes corrupt or damaged then you wouldn’t be able to recover the tail end of the log. If you do have access to the physical log file then you can still back up the tail end of the log. In 2013 I presented a session at the PASS Summit called “The Ultimate Tail Log Backup and Restore” and have been invited back this year to present it again. During this session I demonstrate how you can back up the tail end of the log even after the data file becomes corrupt. In my demonstration I set my database offline and then delete the data file (MDF). The database can’t become more corrupt than that. I attempt to bring the database back online to change the state to RECOVERY PENDING and then backup the tail end of the log. I can do this by specifying WITH NO_TRUNCATE. Using NO_TRUNCATE is equivalent to specifying both COPY_ONLY and CONTINUE_AFTER_ERROR. It as its name says, does not try to truncate the log. This is a great demo however how could I achieve backing up the tail end of the log if the failure destroys my entire instance of SQL and all I had was the LDF file? During my demonstration I also demonstrate that I can attach the log file to a database on another instance and then back up the tail end of the log. If I am performing proper backups then my most recent full, differential and log files should be on a server other than the one that crashed. I am able to achieve this task by creating new database with the same name as the failed database. I then set the database offline, delete my data file and overwrite the log with my good log file. I attempt to bring the database back online and then backup the log with NO_TRUNCATE just like in the first example. I encourage each of you to view my blog post and watch the video demonstration on how to perform these tasks. I really hope that none of you ever have to perform this in production, however it is a really good idea to know how to do this just in case. It really isn’t a matter of “IF” you will have to perform a restore of a production system but more of a “WHEN”. Being able to recover the tail end of the log in these sever cases could be the difference of having to notify all your business customers of data loss or not. If you want me to take a look at your server and its settings, or if your server is facing any issue we can Fix Your SQL Server. Note: Tim has also written an excellent book on SQL Backup and Recovery, a must have for everyone. Reference: Pinal Dave (http://blog.sqlauthority.com)Filed under: Notes from the Field, PostADay, SQL, SQL Authority, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, T SQL

  Read the article

• Right-Time Retail Part 2

  - by David Dorf

  This is part two of the three-part series. Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Right-Time Integration Of course these real-time enabling technologies are only as good as the systems that utilize them, and it only takes one bottleneck to slow everyone else down. What good is an immediate stock-out notification if the supply chain can’t react until tomorrow? Since being formed in 2006, Oracle Retail has been not only adding more integrations between systems, but also modernizing integrations for appropriate speed. Notice I tossed in the word “appropriate.” Not everything needs to be real-time – again, we’re talking about Right-Time Retail. The speed of data capture, analysis, and execution must be synchronized or you’re wasting effort. Unfortunately, there isn’t an enterprise-wide dial that you can crank-up for your estate. You’ll need to improve things piecemeal, with people and processes as limiting factors while choosing the appropriate types of integrations. There are three integration styles we see in the retail industry. First is batch. I know, the word “batch” just sounds slow, but this pattern is less about velocity and more about volume. When there are large amounts of data to be moved, you’ll want to use batch processes. Our technology of choice here is Oracle Data Integrator (ODI), which provides a fast version of Extract-Transform-Load (ETL). Instead of the three-step process, the load and transform steps are combined to save time. ODI is a key technology for moving data into Retail Analytics where we can apply science. Performing analytics on each sale as it occurs doesn’t make any sense, so we batch up a statistically significant amount and submit all at once. The second style is fire-and-forget. For some types of data, we want the data to arrive ASAP but immediacy is not necessary. Speed is less important than guaranteed delivery, so we use message-oriented middleware available in both Weblogic and the Oracle database. For example, Point-of-Service transactions are queued for delivery to Central Office at corporate. If the network is offline, those transactions remain in the queue and will be delivered when the network returns. Transactions cannot be lost and they must be delivered in order. (Ever tried processing a return before the sale?) To enhance the standard queues, we offer the Retail Integration Bus (RIB) to help the management and monitoring of fire-and-forget messaging in the enterprise. The third style is request-response and is most commonly implemented as Web services. This is a synchronous message where the sender waits for a response. In this situation, the volume of data is small, guaranteed delivery is not necessary, but speed is very important. Examples include the website checking inventory, a price lookup, or processing a credit card authorization. The Oracle Service Bus (OSB) typically handles the routing of such messages, and we’ve enhanced its abilities with the Retail Service Backbone (RSB). To better understand these integration patterns and where they apply within the retail enterprise, we’re providing the Retail Reference Library (RRL) at no charge to Oracle Retail customers. The library is composed of a large number of industry business processes, including those necessary to support Commerce Anywhere, as well as detailed architectural diagrams. These diagrams allow implementers to understand the systems involved in integrations and the specific data payloads. Furthermore, with our upcoming release we’ll be providing a new tool called the Retail Integration Console (RIC) that allows IT to monitor and manage integrations from a single point. Using RIC, retailers can quickly discern where integration activity is occurring, volume statistics, average response times, and errors. The dashboards provide the ability to dive down into the architecture documentation to gather information all the way down to the specific payload. Retailers that want real-time integrations will also need real-time monitoring of those integrations to ensure service-level agreements are maintained. Part 3 looks at marketing.

  Read the article

• ADF Reusable Artefacts

  - by Arda Eralp

  Primary reusable ADF Business Component: Entity Objects (EOs) View Objects (VOs) Application Modules (AMs) Framework Extensions Classes Primary reusable ADF Controller: Bounded Task Flows (BTFs) Task Flow Templates Primary reusable ADF Faces: Page Templates Skins Declarative Components Utility Classes Certain components will often be used more than once. Whether the reuse happens within the same application, or across different applications, it is often advantageous to package these reusable components into a library that can be shared between different developers, across different teams, and even across departments within an organization. In the world of Java object-oriented programming, reusing classes and objects is just standard procedure. With the introduction of the model-view-controller (MVC) architecture, applications can be further modularized into separate model, view, and controller layers. By separating the data (model and business services layers) from the presentation (view and controller layers), you ensure that changes to any one layer do not affect the integrity of the other layers. You can change business logic without having to change the UI, or redesign the web pages or front end without having to recode domain logic. Oracle ADF and JDeveloper support the MVC design pattern. When you create an application in JDeveloper, you can choose many application templates that automatically set up data model and user interface projects. Because the different MVC layers are decoupled from each other, development can proceed on different projects in parallel and with a certain amount of independence. ADF Library further extends this modularity of design by providing a convenient and practical way to create, deploy, and reuse high-level components. When you first design your application, you design it with component reusability in mind. If you created components that can be reused, you can package them into JAR files and add them to a reusable component repository. If you need a component, you may look into the repository for those components and then add them into your project or application. For example, you can create an application module for a domain and package it to be used as the data model project in several different applications. Or, if your application will be consuming components, you may be able to load a page template component from a repository of ADF Library JARs to create common look and feel pages. Then you can put your page flow together by stringing together several task flow components pulled from the library. An ADF Library JAR contains ADF components and does not, and cannot, contain other JARs. It should not be confused with the JDeveloper library, Java EE library, or Oracle WebLogic shared library. Reusable Component Description Data Control Any data control can be packaged into an ADF Library JAR. Some of the data controls supported by Oracle ADF include application modules, Enterprise JavaBeans, web services, URL services, JavaBeans, and placeholder data controls. Application Module When you are using ADF Business Components and you generate an application module, an associated application module data control is also generated. When you package an application module data control, you also package up the ADF Business Components associated with that application module. The relevant entity objects, view objects, and associations will be a part of the ADF Library JAR and available for reuse. Business Components Business components are the entity objects, view objects, and associations used in the ADF Business Components data model project. You can package business components by themselves or together with an application module. Task Flows & Task Flow Templates Task flows can be packaged into an ADF Library JAR for reuse. If you drop a bounded task flow that uses page fragments, JDeveloper adds a region to the page and binds it to the dropped task flow. ADF bounded task flows built using pages can be dropped onto pages. The drop will create a link to call the bounded task flow. A task flow call activity and control flow will automatically be added to the task flow, with the view activity referencing the page. If there is more than one existing task flow with a view activity referencing the page, it will prompt you to select the one to automatically add a task flow call activity and control flow. If an ADF task flow template was created in the same project as the task flow, the ADF task flow template will be included in the ADF Library JAR and will be reusable. Page Templates You can package a page template and its artifacts into an ADF Library JAR. If the template uses image files and they are included in a directory within your project, these files will also be available for the template during reuse. Declarative Components You can create declarative components and package them for reuse. The tag libraries associated with the component will be included and loaded into the consuming project. You can also package up projects that have several different reusable components if you expect that more than one component will be consumed. For example, you can create a project that has both an application module and a bounded task flow. When this ADF Library JAR file is consumed, the application will have both the application module and the task flow available for use. You can package multiple components into one JAR file, or you can package a single component into a JAR file. Oracle ADF and JDeveloper give you the option and flexibility to create reusable components that best suit you and your organization. You create a reusable component by using JDeveloper to package and deploy the project that contains the components into a ADF Library JAR file. You use the components by adding that JAR to the consuming project. At design time, the JAR is added to the consuming project's class path and so is available for reuse. At runtime, the reused component runs from the JAR file by reference.

  Read the article

• Clone a VirtualBox Machine

  I just installed VirtualBox, which I want to try out based on recommendations from peers for running a server from within my Windows 7 x64 OS.  Ive never used VirtualBox, so Im certainly no expert at it, but I did want to share my experience with it thus far.  Specifically, my intention is to create a couple of virtual machines.  One I intend to use as a build server, for which a virtual machine makes sense because I can easily move it around as needed if there are hardware issues (its worth noting my need for setting up a build server at the moment is a result of a disk failure on the old build server).  The other VM I want to set up will act as a proxy server for the issue tracking system were using at Code Project, Axosoft OnTime.  They have a Remote Server application for this purpose, and since the OnTime install is 300 miles away from my location, the Remote Server should speed up my use of the OnTime client by limiting the chattiness with the database (at least, thats the hope). So, I need two VMs, and Im lazy.  I dont want to have to install the OS and such twice.  No problem, it should be simple to clone a virtualbox machine, or clone a virtualbox hard drive, right?  Well unfortunately, if you look at the UI for VirtualBox, theres no such command.  Youre left wondering How do I clone a VirtualBox machine? or the slightly related How do I clone a VirtualBox hard drive? If youve used VirtualPC, then you know that its actually pretty easy to copy and move around those VMs.  Not quite so easy with VirtualBox.  Finding the files is easy, theyre located in your user folder within the .VirtualBox folder (possibly within a HardDisks folder).  The disks have a .vdi extension and will be pretty large if youve installed anything.  The one shown here has just Windows Server 2008 R2 installed on it nothing else. If you copy the .vdi file and rename it, you can use the Virtual Media Manager to view it and you can create a new machine and choose the new drive to attach to.  Unfortunately, if you simply make a copy of the drive, this wont work and youll get an error that says something to the effect of: Cannot register the hard disk PATH with UUID {id goes here} because a hard disk PATH2 with UUID {same id goes here} already exists in the media registry (PATH to XML file). There are command line tools you can use to do this in a way that avoids this error.  Specifically, the c:\Program File\Sun\VirtualBox\VBoxManage.exe program is used for all command line access to VirtualBox, and to copy a virtual disk (.vdi file) you would call something like this: VBoxManage clonehd Disk1.vdi Disk1_Copy.vdi However, in my case this didnt work.  I got basically the same error I showed above, along with some debug information for line 628 of VBoxManageDisk.cpp.  As my main task was not to debug the C++ code used to write VirtualBox, I continued looking for a simple way to clone a virtual drive.  I found it in this blog post. The Secret setvdiuuid Command VBoxManage has a whole bunch of commands you can use with it just pass it /? to see the list.  However, it also has a special command called internalcommands that opens up access to even more commands.  The one thats interesting for us here is the setvdiuuid command.  By calling this command and passing in the file path to your vdi file, it will reset the UUID to a new (random, apparently) UUID.  This then allows the virtual media manager to cope with the file, and lets you set up new machines that reference the newly UUIDd virtual drive.  The full command line would be: VBoxManage internalcommands setvdiuuid MyCopy.vdi The following screenshot shows the error when trying clonehd as well as the successful use of setvdiuuid. Summary Now that I can clone machines easily, its a simple matter to set up base builds of any OS I might need, and then fork from there as needed.  Hopefully the GUI for VirtualBox will be improved to include better support for copying machines/disks, as this is Im sure a very common scenario. Did you know that DotNetSlackers also publishes .net articles written by top known .net Authors? We already have over 80 articles in several categories including Silverlight. Take a look: here.

  Read the article

• What is Happening vs. What is Interesting

  - by Geertjan

  Devoxx 2011 was yet another confirmation that all development everywhere is either on the web or on mobile phones. Whether you looked at the conference schedule or attended sessions or talked to speakers at any point at all, it was very clear that no development whatsoever is done anymore on the desktop. In fact, that's something Tim Bray himself told me to my face at the speakers dinner. No new developments of any kind are happening on the desktop. Everyone who is currently on the desktop is working overtime to move all of their applications to the web. They're probably also creating a small subset of their application on an Android tablet, with an even smaller subset on their Android phone. Then you scratch that monolithic surface and find some interesting results. Without naming any names, I asked one of these prominent "ah, forget about the desktop" people at the Devoxx speakers dinner (and I have a witness): "Yes, the desktop is dead, but what about air traffic control, stock trading, oil analysis, risk management applications? In fact, what about any back office application that needs to be usable across all operating systems? Here there is no concern whatsoever with 100% accessibility which is, after all, the only thing that the web has over the desktop, (except when there's a network failure, of course, or when you find yourself in the 3/4 of the world where there's bandwidth problems)? There are 1000's of hidden applications out there that have processing requirements, security requirements, and the requirement that they'll be available even when the network is down or even completely unavailable. Isn't that a valid use case and aren't there 1000's of applications that fall into this so-called niche category? Are you not, in fact, confusing consumer applications, which are increasingly web-based and mobile-based, with high-end corporate applications, which typically need to do massive processing, of one kind or another, for which the web and mobile worlds are completely unsuited?" And you will not believe what the reply to the above question was. (Again, I have a witness to this discussion.) But here it is: "Yes. But those applications are not interesting. I do not want to spend any of my time or work in any way on those applications. They are boring." I'm sad to say that the leaders of the software development community, including those in the Java world, either share the above opinion or are led by it. Because they find something that is not new to be boring, they move on to what is interesting and start talking like the supposedly-boring developments don't even exist. (Kind of like a rapper pretending classical music doesn't exist.) Time and time again I find myself giving Java desktop development courses (at companies, i.e., not hobbyists, or students, but companies, i.e., the places where dollars are earned), where developers say to me: "The course you're giving about creating cross-platform, loosely coupled, and highly cohesive applications is really useful to us. Why do we never find information about this topic at conferences? Why can we never attend a session at a conference where the story about pluggable cross-platform Java is told? Why do we get the impression that we are uncool because we're not on the web and because we're not on a mobile phone, while the reason for that is because we're creating $1000,000 simulation software which has nothing to gain from being on the web or on the mobile phone?" And then I say: "Because nobody knows you exist. Because you're not submitting abstracts to conferences about your very interesting use cases. And because conferences tend to focus on what is new, which tends to be web related (especially HTML 5) or mobile related (especially Android). Because you're not taking the responsibility on yourself to tell the real stories about the real applications being developed all the time and every day. Because you yourself think your work is boring, while in fact it is fascinating. Because desktop developers are working from 9 to 5 on the desktop, in secure environments, such as banks and defense, where you can't spend time, nor have the interest in, blogging your latest tip or trick, as opposed to web developers, who tend to spend a lot of time on the web anyway and are therefore much more inclined to create buzz about the kind of work they're doing." So, next time you look at a conference program and wonder why there's no stories about large desktop development projects in the program, here's the short answer: "No one is going to put those items on the program until you start submitting those kinds of sessions. And until you start blogging. Until you start creating the buzz that the web developers have been creating around their work for the past 10 years or so. And, yes, indeed, programmers get the conference they deserve." And what about Tim Bray? Ask yourself, as Google's lead web technology evangelist, how many desktop developers do you think he talks to and, more generally, what his frame of reference is and what, clearly, he considers to be most interesting.

  Read the article

• ADF Business Components

  - by Arda Eralp

  ADF Business Components and JDeveloper simplify the development, delivery, and customization of business applications for the Java EE platform. With ADF Business Components, developers aren't required to write the application infrastructure code required by the typical Java EE application to: Connect to the database Retrieve data Lock database records Manage transactions   ADF Business Components addresses these tasks through its library of reusable software components and through the supporting design time facilities in JDeveloper. Most importantly, developers save time using ADF Business Components since the JDeveloper design time makes typical development tasks entirely declarative. In particular, JDeveloper supports declarative development with ADF Business Components to: Author and test business logic in components which automatically integrate with databases Reuse business logic through multiple SQL-based views of data, supporting different application tasks Access and update the views from browser, desktop, mobile, and web service clients Customize application functionality in layers without requiring modification of the delivered application The goal of ADF Business Components is to make the business services developer more productive.   ADF Business Components provides a foundation of Java classes that allow your business-tier application components to leverage the functionality provided in the following areas: Simplifying Data Access Design a data model for client displays, including only necessary data Include master-detail hierarchies of any complexity as part of the data model Implement end-user Query-by-Example data filtering without code Automatically coordinate data model changes with business services layer Automatically validate and save any changes to the database   Enforcing Business Domain Validation and Business Logic Declaratively enforce required fields, primary key uniqueness, data precision-scale, and foreign key references Easily capture and enforce both simple and complex business rules, programmatically or declaratively, with multilevel validation support Navigate relationships between business domain objects and enforce constraints related to compound components   Supporting Sophisticated UIs with Multipage Units of Work Automatically reflect changes made by business service application logic in the user interface Retrieve reference information from related tables, and automatically maintain the information when the user changes foreign-key values Simplify multistep web-based business transactions with automatic web-tier state management Handle images, video, sound, and documents without having to use code Synchronize pending data changes across multiple views of data Consistently apply prompts, tooltips, format masks, and error messages in any application Define custom metadata for any business components to support metadata-driven user interface or application functionality Add dynamic attributes at runtime to simplify per-row state management   Implementing High-Performance Service-Oriented Architecture Support highly functional web service interfaces for business integration without writing code Enforce best-practice interface-based programming style Simplify application security with automatic JAAS integration and audit maintenance "Write once, run anywhere": use the same business service as plain Java class, EJB session bean, or web service   Streamlining Application Customization Extend component functionality after delivery without modifying source code Globally substitute delivered components with extended ones without modifying the application   ADF Business Components implements the business service through the following set of cooperating components: Entity object An entity object represents a row in a database table and simplifies modifying its data by handling all data manipulation language (DML) operations for you. These are basically your 1 to 1 representation of a database table. Each table in the database will have 1 and only 1 EO. The EO contains the mapping between columns and attributes. EO's also contain the business logic and validation. These are you core data services. They are responsible for updating, inserting and deleting records. The Attributes tab displays the actual mapping between attributes and columns, the mapping has following fields: Name : contains the name of the attribute we expose in our data model. Type : defines the data type of the attribute in our application. Column : specifies the column to which we want to map the attribute with Column Type : contains the type of the column in the database   View object A view object represents a SQL query. You use the full power of the familiar SQL language to join, filter, sort, and aggregate data into exactly the shape required by the end-user task. The attributes in the View Objects are actually coming from the Entity Object. In the end the VO will generate a query but you basically build a VO by selecting which EO need to participate in the VO and which attributes of those EO you want to use. That's why you have the Entity Usage column so you can see the relation between VO and EO. In the query tab you can clearly see the query that will be generated for the VO. At this stage we don't need it and just use it for information purpose. In later stages we might use it. Application module An application module is the controller of your data layer. It is responsible for keeping hold of the transaction. It exposes the data model to the view layer. You expose the VO's through the Application Module. This is the abstraction of your data layer which you want to show to the outside word.It defines an updatable data model and top-level procedures and functions (called service methods) related to a logical unit of work related to an end-user task. While the base components handle all the common cases through built-in behavior, customization is always possible and the default behavior provided by the base components can be easily overridden or augmented. When you create EO's, a foreign key will be translated into an association in our model. It defines the type of relation and who is the master and child as well as how the visibility of the association looks like. A similar concept exists to identify relations between view objects. These are called view links. These are almost identical as association except that a view link is based upon attributes defined in the view object. It can also be based upon an association. Here's a short summary: Entity Objects: representations of tables Association: Relations between EO's. Representations of foreign keys View Objects: Logical model View Links: Relationships between view objects Application Model: interface to your application  

  Read the article

• Extending Expression Blend 4 &amp; Blend for Visual Studio 2012

  - by Chris Skardon

  Just getting this off the bat, I presume this will also work for Blend 5, but I can’t confirm it… Anyhews, I imagine you’re here because you want to know how to create an addin for Blend, so let’s jump right in there! First, and foremost, we’re going to need to ensure our development environment has the right setup, so the checklist: Visual Studio 2012 Blend for Visual Studio 2012 OK, let’s create a new project (class library, .NET 4.5): Hello.Extension The ‘.Extension’ bit is very very important. The addin will not work unless it is named in this way. You can put whatever you want at the front, but it has to have the extension bit. OK, so now we have a solution with one project. To this project we need to add references to the following things: Microsoft.Expression.Extensibility (from c:\program files\Microsoft Visual Studio 11.0\Blend\   -- x86 folder if you are on an x64 windows install) Microsoft.Expression.Framework (same location as above) PresentationCore PresentationFramework WindowsBase System.ComponentModel.Composition Got them? ACE. Let’s now add a project to contain our control, so, create a new WPF Application project, cunningly named something like ‘Hello.Control’… (I’m creating a WPF application here, because I’m too lazy to dig up the correct references, and this will add all the ones I need ) Once that is created, delete the App.xaml and MainWindow.xaml files, we won’t be needing them. You will also need to change the properties of the project itself, so it is only a class library. Once that is done, let’s add a new UserControl, which will be this: <UserControl x:Class="Hello.Control.HelloControl" xmlns="http://schemas.microsoft.com/winfx/2006/xaml/presentation" xmlns:x="http://schemas.microsoft.com/winfx/2006/xaml" xmlns:mc="http://schemas.openxmlformats.org/markup-compatibility/2006" xmlns:d="http://schemas.microsoft.com/expression/blend/2008" mc:Ignorable="d" d:DesignHeight="300" d:DesignWidth="300"> <Grid> <TextBlock Text="HELLO!!!"/> </Grid> </UserControl> Impressive eh? Now, let’s reference the WPF project from the Extension library. All that’s left now is to code up our extension… So, add a class to the Extension project (name wise doesn’t matter), and make it implement the IPackage interface from the Microsoft.Expression.Extensibility library: public class HelloExtension : IPackage { /**/ } We’ll implement the two methods we need to: public class HelloExtension : IPackage { public void Load(IServices services) { } public void Unload() { } } We’re only really concerned about the Load method in this case, as let’s face it, the extension we have doesn’t need to do a lot to bog off. The interesting thing about the Load method is that it receives an IServices instance. This allows us to get access to all the services that Expression provides, in this case we’re interested in one in particular, the ‘IWindowService’ So, let’s get that bad boy… private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); } Nailed it… But why? The WindowService allows us to register our UserControl with Blend, which in turn allows people to activate and see it, which is a big plus point. So, let’s do that… We’ll create an ‘Initialize’ method to create our new control, and add it to the WindowService: private HelloControl _helloControl; public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloPanel"] == null) _windowService.RegisterPalette("HelloPanel", _helloControl, "Hello Window"); } First we check that we’re not already registered, and if we’re not we register, the first argument is the identifier used by the service to, well, identify your extension. The second argument is the actual control, the third argument is the name that people will see in the ‘Windows’ menu of Blend itself (so important note here – don’t put anything embarrassing or (need I say it?) sweary…) There are only two things to do now - Call ‘Initialize()’ from our Load method, and Export the class This is easy money – add [Export(typeof(IPackage))] to the top of our class… The full code will (should) look like this: [Export(typeof (IPackage))] public class HelloExtension : IPackage { private HelloControl _helloControl; private IWindowService _windowService; public void Load(IServices services) { _windowService = services.GetService<IWindowService>(); Initialize(); } public void Unload() { } public void Initialize() { _helloControl = new HelloControl(); if (_windowService.PaletteRegistry["HelloControl"] == null) _windowService.RegisterPalette("HelloControl", _helloControl, "Hello Window"); } } If you build this and copy it to your ‘Extensions’ folder in Blend (c:\program files\microsoft visual studio 11.0\blend\) and start Blend, you should see ‘Hello Window’ listed in the Window menu: That as they say is it!

  Read the article

• "Guiding" a Domain Expert to Retire from Programming

  - by James Kolpack

  I've got a friend who does IT at a local non-profit where they're using a custom web application which is no longer supported by the company who built it. (out of business, support was too expensive, I'm not sure...) Development on this app started around 10+ years ago so the technologies being harnessed are pretty out of date now - classic asp using vbscript and SQL Server 2000. The application domain is in the realm of government bookkeeping - so even though the development team is long gone, there are often new requirements of this software. Enter the... The domain expert. This is an middle aged accounting whiz without much (or any?) prior development experience. He studied the pages, code and queries and learned how to ape the style of the original team which, believe me, is mediocre at best. He's very clever and very tenacious but has no experience in software beyond what he's picked up from this app. Otherwise, he's a pleasant guy to talk to and definitely knows his domain. My friend in IT, and probably his superiors in the company, want him out of the code. They view him as wasting his expertise on coding tasks he shouldn't be doing. My friend got me involved with a few small contracts which I handled without much problem - other than somewhat of a communication barrier with the domain expert. He explained the requirements very quickly, assuming prior knowledge of the domain which I do not have. This is partially his normal style, and I think maybe a bit of resentment from my involvement. So, I think he feels like the owner of the code and has entrenched himself in a development position. So... his coding technique. One of his latest endeavors was to make a page that only he could reach (theoretically - the security model for the system is wretched) where he can enter a raw SQL query, run it, and save the query to run again later. A report that I worked on had been originally implemented by him using 6 distinct queries, 3 or 4 temp tables to coordinate the data between the queries, and the final result obtained by importing the data from the final query into Access and doing a pivot and some formatting. It worked - well, some of the results were incorrect - but at what a cost! (I implemented the report in a single query with at least 1/10th the amount of code.) He edits code in notepad. He doesn't seem to know about online reference material for the languages. I recently read an article on Dr. Dobbs titled "What Makes Bad Programmers Different" - and instantly thought of our domain expert. From the article: Their code is large, messy, and bug laden. They have very superficial knowledge of their problem domain and their tools. Their code has a lot of copy/paste and they have very little interest in techniques that reduce it. The fail to account for edge cases, while inefficiently dealing with the general case. They never have time to comment their code or break it into smaller pieces. Empirical evidence plays no little role in their decisions. 5.5 out of 6. My friend is wanting me to argue the case to their management - specifically, I got this email from their manager to respond to: ...Also, I need to talk to you about what effect there is from Domain Expert continuing to make edits to the live environment. If that is a problem for you I need to know so I can have his access blocked. Some examples would help. In my opinion, from a technical standpoint, it's dangerous to have him making changes without any oversight. On the other hand, I'm just doing one-off contracts at this point and don't have much desire to get involved deeply enough that I'm essentially arguing as one of the Bobs from Office Space. I'd like to help my friend out - but I feel like I'm getting in the middle of a political battle. More importantly - if I do get involved and suggest that his editing privileges be removed, it needs to be handled carefully so that doesn't feel belittled. He is beyond a doubt the foremost expert on this system. I'm hoping this is familiar territory for some other stackechangers, because I'm feeling a little bewildered. How should I respond? Should I argue that he shouldn't be allowed to touch the code? Should I phrase it as "no single developer, no matter how experienced, should be working on production code unchecked"? Should I argue to keep him involved with the code, but with a review process? Should I say "glad I could help, but uh, I'm busy now!" Other options? Thanks a bunch!

  Read the article

• Context is Everything

  - by Angus Graham

  Normal 0 false false false EN-CA X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin;} Context is Everything How many times have you have you asked a question only to hear an answer like “Well, it depends. What exactly are you trying to do?”.  There are times that raw information can’t tell us what we need to know without putting it in a larger context. Let's take a real world example.  If I'm a maintenance planner trying to figure out which assets should be replaced during my next maintenance window, I'm going to go to my Asset Management System.  I can get it to spit out a list of assets that have failed several times over the last year.  But what are these assets connected to?  Is there any safety consequences to shutting off this pipeline to do the work?  Is some other work that's planned going to conflict with replacing this asset?  Several of these questions can't be answered by simply spitting out a list of asset IDs.  The maintenance planner will have to reference a diagram of the plant to answer several of these questions. This is precisely the idea behind Augmented Business Visualization. An Augmented Business Visualization (ABV) solution is one where your structured data (enterprise application data) and your unstructured data (documents, contracts, floor plans, designs, etc.) come together to allow you to make better decisions.  Essentially we're showing your business data into its context. AutoVue allows you to create ABV solutions by integrating your enterprise application with AutoVue’s hotspot framework. Hotspots can be defined for your document. Users can click these hotspots to trigger actions in your enterprise app. Similarly, the enterprise app can highlight the hotspots in your document based on its business data, creating a visual dashboard of your business data in the context of your document. ABV is not new. We introduced the hotspot framework in AutoVue 20.1 with text hotspots. Any text in a PDF or 2D CAD drawing could be turned into a hotspot. In 20.2 we have enhanced this to include 2 new types of hotspots: 3D and regional hotspots. 3D hotspots allow you to turn 3D parts into hotspots. Hotspots can be defined based on the attributes of the part, so you can create hotspots based on part numbers, material, date of delivery, etc.  Regional hotspots allow an administrator to define rectangular regions on any PDF, image, or 2D CAD drawing. This is perfect for cases where the document you’re using either doesn’t have text in it (a JPG or TIFF for example) or if you want to define hotspots that don’t correspond to the text in the document. There are lots of possible uses for AutoVue hotspots.  A great demonstration of how our hotspot capabilities can help add context to enterprise data in the Energy sector can be found in the following AutoVue movies: Maintenance Planning in the Energy Sector - Watch it Now Capital Construction Project Management in the Energy Sector  -  Watch it Now Commissioning and Handover Process for the Energy Sector  -  Watch it Now

  Read the article

• Pirates, Treasure Chests and Architectural Mapping

  Pirate 1: Why do pirates create treasure maps? Pirate 2: I do not know.Pirate 1: So they can find their gold. Yes, that was a bad joke, but it does illustrate a point. Pirates are known for drawing treasure maps to their most prized possession. These documents detail the decisions pirates made in order to hide and find their chests of gold. The map allows them to trace the steps they took originally to hide their treasure so that they may return. As software engineers, programmers, and architects we need to treat software implementations much like our treasure chest. Why is software like a treasure chest? It cost money, time,  and resources to develop (Usually) It can make or save money, time, and resources (Hopefully) If we operate under the assumption that software is like a treasure chest then wouldn’t make sense to document the steps, rationale, concerns, and decisions about how it was designed? Pirates are notorious for documenting where they hide their treasure.  Shouldn’t we as creators of software do the same? By documenting our design decisions and rationale behind them will help others be able to understand and maintain implemented systems. This can only be done if the design decisions are correctly mapped to its corresponding implementation. This allows for architectural decisions to be traced from the conceptual model, architectural design and finally to the implementation. Mapping gives software professional a method to trace the reason why specific areas of code were developed verses other options. Just like the pirates we need to able to trace our steps from the start of a project to its implementation,  so that we will understand why specific choices were chosen. The traceability of a software implementation that actually maps back to its originating design decisions is invaluable for ensuring that architectural drifting and erosion does not take place. The drifting and erosion is prevented by allowing others to understand the rational of why an implementation was created in a specific manor or methodology The process of mapping distinct design concerns/decisions to the location of its implemented is called traceability. In this context traceability is defined as method for connecting distinctive software artifacts. This process allows architectural design models and decisions to be directly connected with its physical implementation. The process of mapping architectural design concerns to a software implementation can be very complex. However, most design decision can be placed in  a few generalized categories. Commonly Mapped Design Decisions Design Rationale Components and Connectors Interfaces Behaviors/Properties Design rational is one of the hardest categories to map directly to an implementation. Typically this rational is mapped or document in code via comments. These comments consist of general design decisions and reasoning because they do not directly refer to a specific part of an application. They typically focus more on the higher level concerns. Components and connectors can directly be mapped to architectural concerns. Typically concerns subdivide an application in to distinct functional areas. These functional areas then can map directly back to their originating concerns.Interfaces can be mapped back to design concerns in one of two ways. Interfaces that pertain to specific function definitions can be directly mapped back to its originating concern(s). However, more complicated interfaces require additional analysis to ensure that the proper mappings are created. Depending on the complexity some Behaviors\Properties can be translated directly into a generic implementation structure that is ready for business logic. In addition, some behaviors can be translated directly in to an actual implementation depending on the complexity and architectural tools used. Mapping design concerns to an implementation is a lot of work to maintain, but is doable. In order to ensure that concerns are mapped correctly and that an implementation correctly reflects its design concerns then one of two standard approaches are usually used. All Changes Come From ArchitectureBy forcing all application changes to come through the architectural model prior to implementation then the existing mappings will be used to locate where in the implementation changes need to occur. Allow Changes From Implementation Or Architecture By allowing changes to come from the implementation and/or the architecture then the other area must be kept in sync. This methodology is more complex compared to the previous approach.  One reason to justify the added complexity for an application is due to the fact that this approach tends to detect and prevent architectural drift and erosion. Additionally, this approach is usually maintained via software because of the complexity. Reference:Taylor, R. N., Medvidovic, N., & Dashofy, E. M. (2009). Software architecture: Foundations, theory, and practice Hoboken, NJ: John Wiley & Sons  

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >