Search Results

Search found 22866 results on 915 pages for 'ftp client'.

Page 424/915 | < Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >

• Force local IP traffic to an external interface

  - by calandoa

  I have a machine with several interfaces that I can configure as I want, for instance: eth1: 192.168.1.1 eth2: 192.168.2.2 I would like to be able to forward all the traffic to one of these local address trhough the other interface. For instance, all requests to an iperf, ftp, http server at 192.168.1.1 are not just routed internally, but forwarded through eth2 (and the external network will take care of re-routing the packet to eth1). I tried and looked at several commands, like iptables, ip route, etc... but nothing worked. The closest behavior I could get was done with: ip route change to 192.168.1.1/24 dev eth2 which send all 192.168.1.x on eth2, except for 192.168.1.1 which is still routed internally. The goal of this setup is to do interface driver testing without using two PCs. I am using Linux, but if you know how to do that with Windows, I'll buy it!

  Read the article

• How do I upload huge files across the internet without using P2P?

  - by Brien Malone

  I work remotely and have 44GB of media files that I need to send back to my office. There are lots of free services out there that can handle up to 2GB, but I haven't seen talk of anything larger. We both have 50mbps+ connections, so I would rather not mail physical media (though, that is an option). Bittorrent is blocked at my corporate headquarters. We have an FTP server, but the per-user cap is 10GB. I use Citrix, but throughput is throttled to 3mbps. (44gb @ 50mbps = 4 to 5 hours... @3mbps = 5 or 6 days.) Any suggestions appreciated. Windows 7 and Windows 2003 Server are the OSes Involved I have tried JetBytes and it is blocked by our content filter

  Read the article

• How to enabled pdo mysql in Centos 5.8

  - by nacho3d

  I have a VPS with Centos 5.8 In phpinfo displays: './configure' '--disable-fileinfo' '--disable-pdo' '--enable-bcmath' '--enable-calendar' '--enable-ftp' '--enable-libxml' '--enable-magic-quotes' '--enable-sockets' '--prefix=/usr/local' '--with-apxs2=/usr/local/apache/bin/apxs' '--with-curl=/opt/curlssl/' '--with-imap=/opt/php_with_imap_client/' '--with-imap-ssl=/usr' '--with-kerberos' '--with-libdir=lib64' '--with-libxml-dir=/opt/xml2/' '--with-mysql=/usr' '--with-mysql-sock=/var/lib/mysql/mysql.sock' '--with-openssl=/usr' '--with-openssl-dir=/usr' '--with-pcre-regex=/opt/pcre' '--with-pic' '--with-zlib' '--with-zlib-dir=/usr' I've tried this: http://www.host1free.com/forum/vps-technical-support/7248-tutoria-centos-apache-webserver-mysql-php-eaccelerator-apc.html And aparently it installed php-pdo # rpm -qa |grep php php-5.3.13-1.el5.remi php-xml-5.3.13-1.el5.remi php-common-5.3.13-1.el5.remi php-cli-5.3.13-1.el5.remi php-pdo-5.3.13-1.el5.remi php-xmlrpc-5.3.13-1.el5.remi php-mcrypt-5.3.13-1.el5.remi But I've restarted apache and it still says in my phpinfo: '--disable-pdo' Should I rebuild php? Do I need to do some other step?

  Read the article

• How to upgrade libxml on CentOS

  - by Radek Simko

  I have a following version of CentOS: $ cat /etc/issue CentOS release 5.5 (Final) Kernel \r on an \m and following version of libxml: $ php -i | grep libxml libxml Version => 2.6.26 libxml libxml2 Version => 2.6.26 libxslt compiled against libxml Version => 2.6.26 and need to have newer version of libxml (primarly for usage in PHP, but obviously, it doesn't matter). If I even install the newer version of libxml somehow: wget ftp://xmlsoft.org/libxml2/libxml2-2.7.2.tar.gz tar -xvf libxml2-2.7.2.tar.gz cd libxml2-2.7.2 ./configure make sudo make install then I am unable to get it to work in PHP - there is still old version: libxml Version => 2.6.26 libxml libxml2 Version => 2.6.26 libxslt compiled against libxml Version => 2.6.26 What else do I need to do to make the new version to work with PHP?

  Read the article

• server shrinks html file to 0bytes on upload

  - by user38714

  Hi there, I have come across a very unusual problem. I am working on a website at the moment and whenever I upload a file to the server, it becomes a 0kb file. I have changed ftp software to filezilla to see would this help and it hasn't. I have compared it to other sites I am working on the permissions are the same numbers 0644 but on the site that I am having the trouble with the permissions have the prefix- flcdmpe(0644). Would this be the problem and if so any ideas how to change it?, changing the permissions doesn't work. I have been onto the host company and they cannot figure it out at all. Any help would be appreciated. Cheers Emma

  Read the article

• Upgrade an Ubuntu 8.04 installation with VMware Server 1.0.8 and lots of guest OSes to Something Els

  - by Glyph

  I have an Ubuntu 8.04 (Hardy Heron) host machine which is running a whole slew of virtual machines in VMWare Server 1.0.8. Among other guest OSes, there is every release version of Ubuntu since 6.06, OpenSolaris 2009.06, and Windows XP. Right now I access these VMs from a variety of client OSes as well; Linux and Windows via the VMWare server console, and MacOS via X-forwarding the host machine's server console. I'd like to upgrade the host to Ubuntu 10.04 (Lucid Lynx), but from what I can tell, getting VMWare Server 1.x to work on a more recent version of Linux is a real pain. While VMware Server 2.x is a bit easier, it's still not packaged as Debian packages, so installing security updates is a big chore. As long as I'm upgrading anyway, I'd like to move to a virtualization solution that will allow me to automate applying updates. The options that I'm aware of right now are KVM (managed via virt-manager) and VirtualBox (as managed by its own tools or via its own libvirt bindings), but I'm open to other suggestions. For each option, I'd like to know how do I convert my guest images to the new format? am I going to have to re-activate my Windows guests (alternatively, "If the virtual hardware is different by default, can I avoid re-activation by changing some virtualization configuration to provide me with more similar virtual hardware") what are the management options like for each client OS (mac, linux, windows)? Thanks.

  Read the article

• What command should be used to connect via SSH through squid proxy?

  - by Raul Cardoso

  I have set up a Squid HTTP Proxy (in centOS) and intended to use it also for ssh connections. Managed to configure putty (in a windows client) to use this proxy while connecting by ssh. Confirmed in the "target host" that the ssh connection was coming from Proxy server ip instead of the windows client IP. Used: targethost: 22 for ssh proxyserv: 3128 for proxy (along with proxy credentials) I'm now having problems connecting to the "target host" using Ubuntu and the same proxy server. I have tried the following: me@mycomp:~$ connect-proxy -H test@proxyserv:3128 targethost 22 Enter proxy authentication password for test@proxyserv: SSH-2.0-OpenSSH_6.2p2 Ubuntu-6 It hangs in last line, expecting some input. All attempts resulted in a "Protocol mismatch." error. Putty successfully connects to the http proxy and sends credentials, showing me ssh login right away. - How to do (with commands in Ubuntu) the same putty does? - Is there any other way than connect-proxy command to do this? Edit: Also tried the following with same result ("Protocol mismatch") me@mycomp:~$ connect-proxy -H test@proxyserv:3128 targethost 22 ssh -l myshel_login Thanks in advance Edit: Solution details (thanks to NickW pointing the right way) installed corkscrew and added to ssh_config Host targethost ProxyCommand corkscrew proxyserv 3128 %h %p /etc/ssh/proxypass created proxypass file login:password Restarted ssh and used a simple ssh command ssh mylogin@targethost (ssh password was asked as usual)

  Read the article

• help with internet

  - by Remus Rigo

  hi all I have 3 PC's at home (with Win XP, Win 7 & Win 7) and a router. I am always connected to the internet through the router (PPoE connection). My problem is that sometimes when I want to search or open a page, my browser tells me that the server cannot be reached, as if I don't have a connection to the internet. Other times it logs me out from messenger, but browsing still works. FTP download/upload also works. If i disable and enable the LAN then all works fine. Anyone got any idea besides re-installing OS? thanks

  Read the article

• Balancing internal services using a Cisco CSS 11501

  - by Ladadadada

  First, the background to the problem: I have a Cisco CSS11501 that I am using to load balance a few web servers. These web servers have two network interfaces, one internal and one external and we are sending the requests to the internal interface. We have the CSS configured to do NAT because our webservers need to see the client's IP address. Because the TCP packets hit the webservers with a source address on the Internet, the webserver tries to send the packet back to the client over the external interface and not through the load balancer. In order to stop these requests being sent back out to the Internet via the external interface, we added a routing rule on these boxes so that all traffic with a source address on the internet will use the load balancer as the gateway. This part works fine. What I would also like to to is use the CSS as a load balancer for internal services such as our MySQL slaves. When I do this, I run into a similar problem; the TCP connection goes from the web server to the load balancer and then from the load balancer to the MySQL slave but the CSS spoofs a source address of the original webserver. The MySQL slave then tries to send the response directly to the webserver via the internal network and not via the load balancer. The ideal solution would be to tell the CSS not to do source address spoofing on the internal network and only do it for requests originating on the Internet. Is this possible ? Failing that, is there a way of directing the load balanced traffic back through the load balancer while keeping the other traffic (say SSH) purely on the internal network ? Is there another way of using the CSS11501 to load balance internal services ?

  Read the article

• SMB super slow within LAN between MAC and PC

  - by asdcasdc

  I have a windows desktop which stores all my movies, songs and pictures. I have a mac laptop which I would like to access these files. I don't want to utilize the FTP or SCP protocol because I don't want them to be downloaded to my mac. I want to access them as if they are a network mounted disk. So I tried using the native SMB protocol (available in Finder - Go - Connect to server). I tried dragging a file and dropping it onto my MAC's desktop. Surprisingly, I am only able to transfer at a very slow rate of about 1mb/s. Assuming network connectivity is not a problem, has anyone experienced incredible slowness with SMB? Are there alternative protocols for me to use in this case between PC and MAC?

  Read the article

• Robocopy silently missing files

  - by John Hunt

  I'm using Robocopy to sync data from our server's hard disk to an external disk as a backup. It's a pretty simple solution but pretty much the best/easiest one we could come up with - we use two external disks and rotate them offsite. Anyway, here's the script (with the comments taken out) that I'm using to do it. It works very well, it's quick and almost 100% complete - however it's acting pretty strange with a few files (note company name has been changed in paths to protect the innocent): @ECHO OFF set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% SET prefix="E:\backup_log-" SET source_dir="M:\Company Names Data\Working Folder\_ADMIN_BACKUP_FILES\COMPA AANY Business Folder_Backup_040407\COMPANY_sales order register\BACKUP CLIENT FOLDERS & CURRENT JOBS pre 270404\CLIENT SALES ORDER REGISTER" SET dest_dir="E:\dest" SET log_fname=%prefix%%date:~-4,4%%date:~-10,2%%date:~-7,2%.log SET what_to_copy=/COPY:DAT /MIR SET options=/R:0 /W:0 /LOG+:%log_fname% /NFL /NDL ROBOCOPY %source_dir% %dest_dir% %what_to_copy% %options% set DATESTAMP=%DATE:~10,4%/%DATE:~4,2%/%DATE:~7,2% %TIME:~0,2%:%TIME:~3,2%:%TIME:~6,2% cscript msg.vbs "Backup completed at %DATESTAMP% - Logs can be found on the E: drive." :END Normally the source would just be M:\Comapany name data\ but I altered the script a bit to test the problem. The following files in the source are not copied to the dest: Someclient\SONICP~1.DOC Someclient\SONICP~2.DOC Someclient\SONICP~3.DOC However, files in the same directory named: TIMESH~1.XLS TIMESH~2.XLS are copied. I'm able to open the files that aren't copied with no trouble at all, and they certainly weren't opened when I ran robocopy so it's not a locking issue. Robocopy is running as administrator so it's not a permissions issue. There's no trace these files were even attempted to be copied as there are no errors being output in the log or in my command prompt. Does anyone have any suggestions as to what this might be? Busted hard disk? Cheers, John.

  Read the article

• In spite of correct DNS, Exchange sending to wrong destination server for single outbound domain

  - by beporter

  My company uses an SBS 2003 server and makes use of Exchange to host our own email. We also have a linux server hosting domains for some of our clients. In order for us to send to those clients, we had internal DNS set up to shadow the client domains to provide "correct" MX records inside our network. For example, public DNS for a domain abc.com might point to 1.2.3.4, but internally we have MX records set up to route mail for abc.com to 172.16.0.4, which is the linux email server. This setup was entirely functional; this is just back story. We've recently moved one of our client domains from our internal linux server to an external email provider. When we did that, we naturally deleted our internal shadow DNS records so our Exchange server would fetch correct (public) DNS records and route mail out to the new external host. This has NOT had any effect on Exchange though. Even after rebooting the Exchange server and completely flushing the DNS cache (nslookups on the Exchange machine itself correctly resolve to the new external address) Exchange still attempts to deliver messages for the domain to our internal server! Exchange correctly routes to all other internal and external domains when sending email. Somehow Exchange is trying to deliver to a machine that by all accounts it has no business trying to use for just this one domain. Is there a DNS cache that Exchange uses internally? Is there a way to flush that internal cache? What else could I be missing?

  Read the article

• Debian Server Daemon: File sync

  - by Gehk

  Hello, I'm looking for a way to (auto) sync files on some pcs over the internet and save/backup them on my server. Just like Dropbox and other services like that. I found iFolder (by Novell), but it's not made for debian (i think it would still compile). I don't know if it's made for an webserver or just home server. Another way would be FTP, I don't know clients (i use ubuntu and windows on my pcs), which autoupload new/edited files. There is also svn/csv, but they are quite slow (afaik), and I don't know if there are suited for this. Someone got an idea? Thanks.

  Read the article

• php jpeg support

  - by Thomas

  Hi all, I have complied php with the below options './configure' '--with-config-file-path=/opt/apache/php/etc' '--with-config-file-scan-dir=/opt/apache/php/etc/php.d' '--enable-sysvsem' '--enable-sysvshm' '--enable-sysvmsg' '--enable-shmop' '--enable-soap' '--enable-bcmath' '--disable-debug' '--enable-ftp' '--with-curl=/usr/include' '--with-regex=system' '--enable-inline-optimization' '--enable-magic-quotes' '--enable-mbstring' '--enable-wddx=shared' '--enable-xml' '--with-gd' '--with-gettext' '--with-mysql' '--with-zlib-dir=/usr/local/lib' '--enable-mbstring' '--prefix=/opt/apache/php' '--with-apxs2=/opt/apache/bin/apxs' '--with-zlib' '--with-openssl' '--with-freetype-dir=/usr/include/freetype2/freetype--with-jpeg-dir=/usr/lib/' but I have no jpeg support. Am I missing something? libjpeg and libjpeg-devel are installed Thanks

  Read the article

• Mail on other server

  - by takeshin

  Here is the current DNS setup: mx.example.com 3600 A 93.157.123.73 example.com 3600 A 93.157.123.93 www.example.com 3600 A 93.157.123.93 mail.example.com 3600 A 93.157.123.72 smtp.example.com 3600 CNAME mail.example.com pop3.example.com 3600 CNAME mail.example.com imap.example.com 3600 CNAME mail.example.com panel.example.com 3600 CNAME panel.example2.pl www.panel.example.com 3600 CNAME panel.example2.pl ftp.example.com 3600 CNAME example.com mysql.example.com 3600 CNAME example.com pgsql.example.com 3600 CNAME example.com *.example.com 3600 CNAME example.com example.com 3600 MX 10 mx.example.com example.com 3600 NS ns1.example2.pl example.com 3600 NS ns2.example.pl example.com 3600 TXT "v=spf1 redirect=_spf.example3.pl" My client wants to have mail on his own server alfa.otherhost.com. Which entries do I have to update? Only the MX one? example.com 3600 MX 10 alfa.otherhost.com or: example.com 3600 MX 10 mx.alfa.otherhost.com Do I need to update POP, SMTP and IMAP entries too?

  Read the article

• How to connect to Oracle DB via ODBC

  - by Mat

  I am attempting to connect to a remote Oracle DB via ODBC. I am totally inexperienced and fail to connect. What I have installed: Oracle 'ODBC Driver for RDB' A program I want to connect from (Altova Mapforce, an ETL) What I do: Under Administrative tools I open the Windows "ODBC Data Source Administrator I click 'Add..' and select the Oracle ODBC Driver The Window 'Oracle RDB Driver Setup' opens. I fill in: Data source name: free choice Description: I leave blank Transport: I choose TCP/IP Server: I input the IP address of the server Service: I leave 'generic' UserID: I enter the user name (that belongs to the password I have) Attach Statement: no idea what do do here?? Upon choosing 'OK', the 'Oracle RDB ODBC Driver Connect' opens and I am prompted the password. I enter the password and the connection fails. Questions Do I need further programs on my computer, e.g. the Oracle client of Instant client? I am never prompted the port of the server - isn't this relevant? I am never prompted SID - isn't this relevant? I connected from SQL developer easily - it prompted only server IP, port, username, password and SID.

  Read the article

• Gwibber doesnt launch post upgrade

  - by Arcath

  i updated my pc from ubuntu 9.10 to 10.04 and one of the things i was looking forward too was the "me menu" and gwibber. For some reason gwibber doesnt launch at all. when i try to launch it from terminal i get: [21:02:20][arcath@Highgate ~]$ gwibber ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowState' as enum when in fact it is of type 'GFlags' ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowActions' as enum when in fact it is of type 'GFlags' ** (gwibber:8182): WARNING **: Trying to register gtype 'WnckWindowMoveResizeMask' as enum when in fact it is of type 'GFlags' Traceback (most recent call last): File "/usr/bin/gwibber", line 50, in <module> from gwibber import client File "/usr/lib/python2.6/dist-packages/gwibber/client.py", line 3, in <module> import gtk, gobject, gwui, util, resources, actions, json, gconf File "/usr/lib/python2.6/dist-packages/gwibber/gwui.py", line 2, in <module> import os, json, urlparse, resources, util File "/usr/lib/python2.6/dist-packages/gwibber/util.py", line 2, in <module> from microblog.util.couch import RecordMonitor File "/usr/lib/python2.6/dist-packages/gwibber/microblog/util/couch.py", line 10, in <module> OAUTH_DATA = desktopcouch.local_files.get_oauth_tokens() File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 323, in get_oauth_tokens oauth_token_secrets = cf.items_in_section("oauth_token_secrets")[0] File "/usr/lib/python2.6/dist-packages/desktopcouch/local_files.py", line 189, in items_in_section raise ValueError("Section %r not present." % (section_name,)) ValueError: Section 'oauth_token_secrets' not present. and i cant work out whats wrong with it. Can anyone point me in the right direction?

  Read the article

• I have added a port to the public zone in firewalld but still can't access the port

  - by mikemaccana

  I've been using iptables for a long time, but have never used firewalld until recently. I have enabled port 3000 TCP via firewalld with the following command: # firewall-cmd --zone=public --add-port=3000/tcp --permanent However I can't access the server on port 3000. From an external box: telnet 178.62.16.244 3000 Trying 178.62.16.244... telnet: connect to address 178.62.16.244: Connection refused There are no routing issues: I have a separate rule for a port forward from port 80 to port 8000 which works fine externally. My app is definitely listening on the port too: Proto Recv-Q Send-Q Local Address Foreign Address State User Inode PID/Program name tcp 0 0 0.0.0.0:3000 0.0.0.0:* LISTEN 99 36797 18662/node firewall-cmd doesn't seem to show the port either - see how ports is empty. You can see the forward rule I mentioned earlier. # firewall-cmd --list-all public (default, active) interfaces: eth0 sources: services: dhcpv6-client ssh ports: masquerade: no forward-ports: port=80:proto=tcp:toport=8000:toaddr= icmp-blocks: rich rules: However I can see the rule in the XML config file: # cat /etc/firewalld/zones/public.xml <?xml version="1.0" encoding="utf-8"?> <zone> <short>Public</short> <description>For use in public areas. You do not trust the other computers on networks to not harm your computer. Only selected incoming connections are accepted.</description> <service name="dhcpv6-client"/> <service name="ssh"/> <port protocol="tcp" port="3000"/> <forward-port to-port="8000" protocol="tcp" port="80"/> </zone> What else do I need to do to allow access to my app on port 3000? Also: is adding access via a port the correct thing to do? Or should I make a firewalld 'service' for my app instead?

  Read the article

• Moving case sensitive Linux files via Windows

  - by sunwukung

  Hi the company I work for is currently trying to move a Magento installation from one server to another - however, the product images are saved in folders alphabetically indexed folders - but with an added twist, some of the letters are the same but have a different case - i.e. a, A, b, C, D, e, E, f, F, G, h, I That being the case, when we try to drag those files down from FTP in order to move them, Windows does not honour the case sensitive distinction and we are losing several image folders. Is there a simple workaround for this issue? Any help is greatly appreciated. regards SWK

  Read the article

• Using mod_rewrite to mask /cgi-bin/abc as /def

  - by Alois Mahdal

  I have a seemingly easy task, but somehow I just can't get it to work: Some interesting lines from my httpd.conf: ... DocumentRoot "D:/opt/apache/htdocs" ... ScriptAlias /cgi-bin/ "D:/opt/apache/cgi-bin/" ... <Directory "D:/opt/apache/htdocs"> Options Indexes FollowSymLinks ExecCGI AllowOverride None Order allow,deny Allow from all </Directory> <Directory "D:/opt/apache/cgi-bin/"> AllowOverride None Options ExecCGI Order allow,deny Allow from all </Directory> (I know it's dumb but it's only a testing machine :D.) Now, I have d:\opt\apache\cgi-bin\expired.pl and I expect GET /licensecheck.php?code=123456. And I wish to fake client into thinking it speaks with /licensecheck.php, but actually return data by \expired.pl. What I tried was setting following at the end of http.conf: RewriteEngine on RewriteRule ^/licensecheck.php$ /cgi-bin/expired.pl [T=application/x-httpd-cgi,L] ...but it keeps 404-ing me, looking for cgi-bin directory (not cgi-bin\expired.pl) in my DocumentRoot! [error] [client 127.0.0.1] script not found or unable to stat: D:/opt/apache/htdocs/cgi-bin /cgi-bin/expired.pl and all other scripts in /cgi-bin/ work as expected, Only way I could make it work was actually putting the \expired.pl to DocumentRoot, but I don't want this, I want my cgi-bin neatly separated :)

  Read the article

• Website deployment - managing uploaded content?

  - by Legion

  I'm a programmer by trade, "server administrator" by company necessity. We're looking at dumping the old painful "update site by FTP upload" style of deployment. Having the webserver check out the latest code base from version control into a folder and having a "current" symlink point to the latest checkout (allowing for easily stepping back to an older version by changing the symlink) seems to be the way we want to go. But I have a question: what's a good practice for dealing with user-uploaded content? This stuff isn't in version control. I have a couple of ideas for dealing with this, but what is the smart, accepted practice?

  Read the article

• Ghosting context menu clicks in WinXP

  - by Swish

  Let me preface by saying I have a lot of windows open most of the time, although not resource intensive ones, just browsers, ssh sessions, a music player, FTP client, Notepad++, IM clkients, etc. Anyway, I get a lot of weird visual "ghosting" type effects. For example when right-clicking and then selecting an option from a context menu the selected item will remain in view until I right click somewhere on the desktop. Same thing happens when selecting items from the File, Edit, etc. menu in various programs. I'm assuming this is just a result of a less than high quality video card (NVIDIA GeForce FX 5200), all the other hardware in the machine is newer higher quality, that specific video card was added after the fact for multiple monitors. I have looked all over the web for solutions and have increased the number of GDI handles for Windows, reduced the hardware accelaration on the card, etc. Any suggestions other than replace the card?

  Read the article

• rsync over SSH with cron in osx-environment

  - by Martin

  I want to automatically download files and folders from a Linux server to which I have an SSH (and FTP) account. The files shall be downloaded on a regular basis (I suppose a cron is the right tool to do so) onto an OS X machine. I tried the following rsync command, which works fine: rsync -avzbe ssh [email protected]:/www/htdocs/something/somefolder /Users/me/folder/foo/ However I have to enter the account's password every time (the SSH account on the server machine). The server is a managed one and I'm afraid I can't change the password. Here are my questions: How do I bypass the entering of the password by storing it somewhere How do I automate this then correctly?

  Read the article

• How to set CA cert file for LDAP backend server in smbpasswd configuration

  - by hayalci

  I am having a problem with smbpasswd, an LDAP backend server and SSL/TLS certificates. The client machine that I run smbpasswd on is a Debian Etch machine, and the Ldap server is Sun DS running on Solaris. All the following occurs on the client. When I disable SSL, by setting "ldap ssl = no" in smb.conf, the smbpasswd program works without errors. When I set "ldap ssl = start tls", the following messages are printed by smbpasswd and there is a long timeout period before any password is asked by it Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! ..... long delay ..... New SMB password: Retype new SMB password: Failed to issue the StartTLS instruction: Connect error Connection to LDAP server failed for the 1 try! smbpasswd: /tmp/buildd/openldap2-2.1.30/libraries/liblber/io.c:702: ber_get_next: Assertion `0' failed. Aborted I conducted some tests with "ldapsearch -ZZ". It was not working at first, but after I added the TLS_CACERT line to /etc/ldap/ldap.conf, /etc/libnss-ldap.conf and /etc/pam_ldap.conf, it started working. So relevant TLS sections in all those files are: ssl start_tls tls_checkpeer no tls_cacertfile /path/to/ca-root.pem TLS_CACERT /path/to/ca-root.pem But the smbpasswd program continued giving the error. I tried creating /etc/smbldap-tools/smbldap.conf file with following content (after consulting debian docs for smbldap-tools package) But as I see, smbpasswd comes with samba-common package and does not use the configuration for smbldap-tools utilities. verify="optional" cafile="/path/to/ca-root.pem" My question is: How can I set which SSL CA Certificate is used by smbpasswd program ?

  Read the article

• IIS permission configuration issue

  - by Dan

  Sorry the title of this question is a little ambiguous but I don't really have any idea where the issue lies - I'm seeking some clarification of the server error logs. Basically, I had a dedicated server running Windows 2003 and Plesk (v8 I think). Last week the server hardware failed and the entire thing had to be rebuilt from scratch. New hardware was put in, new operating system (Win2008), new Plesk installation (v9.5), new software (MSSQL etc) then all data ported over manually from old C and D drives to restore all 30 client sites. It was hell! All has been okay for a couple of days now but about an hour ago POP! Suddenly all sites went down giving a 500 error. Restarting all services eventually brought everything back online, but I'm now living in total fear. It can - and probably will - happen again. The guys on support gave me the following errors from the server log: The Template Persistent Cache initialization failed for Application Pool 'ASP.NET v4.0 Classic' because of the following error: Could not create a Disk Cache Sub-directory for the Application Pool. The data may have additional error codes.. The worker process for application pool 'domain1.com(domain)(2.0)(pool)' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\domain1.com(domain)(2.0)(pool).config', line number '0'. The data field contains the error code. The worker process for application pool 'PleskControlPanel' encountered an error 'Cannot read configuration file ' trying to read configuration data from file '\\?\C:\inetpub\temp\apppools\PleskControlPanel.config', line number '0'. The data field contains the error code. The support guys are so ambiguous about this and it scares me horribly. Can anyone positively identify the cause of this error which lead to all client website going offline? What can be done to prevent it from happening again? Any pointers would be very much appreciated! Thanks folks...

  Read the article

< Previous Page | 420 421 422 423 424 425 426 427 428 429 430 431  | Next Page >