Search Results

Search found 11897 results on 476 pages for 'dean rather'.

Page 427/476 | < Previous Page | 423 424 425 426 427 428 429 430 431 432 433 434  | Next Page >

• Creating a Reverse Proxy with URL Rewrite for IIS

  - by OWScott

  There are times when you need to reverse proxy through a server. The most common example is when you have an internal web server that isn’t exposed to the internet, and you have a public web server accessible to the internet. If you want to serve up traffic from the internal web server, you can do this through the public web server by creating a tunnel (aka reverse proxy). Essentially, you can front the internal web server with a friendly URL, even hiding custom ports. For example, consider an internal web server with a URL of http://10.10.0.50:8111. You can make that available through a public URL like http://tools.mysite.com/ as seen in the following image. The URL can be made public or it can be used for your internal staff and have it password protected and/or locked down by IP address. This is easy to do with URL Rewrite and IIS. You will also need Application Request Routing (ARR) installed even though for a simple reverse proxy you won’t use most of ARR’s functionality. If you don’t already have URL Rewrite and ARR installed you can do so easily with the Web Platform Installer. A lot can be said about reverse proxies and many different situations and ways to route the traffic and handle different URL patterns. However, my goal here is to get you up and going in the easiest way possible. Then you can dig in deeper after you get the base configuration in place. URL Rewrite makes a reverse proxy very easy to set up. Note that the URL Rewrite Add Rules template doesn’t include Reverse Proxy at the server level. That’s not to say that you can’t create a server-level reverse proxy, but the URL Rewrite rules template doesn’t help you with that. Getting Started First you must create a website on your public web server that has the public bindings that you need. Alternately, you can use an existing site and route using conditions for certain traffic. After you’ve created your site then open up URL Rewrite at the site level. Using the “Add Rule(s)…” template that is opened from the right-hand actions pane, create a new Reverse Proxy rule. If you receive a prompt (the first time) that the proxy functionality needs to be enabled, select OK. This is telling you that a proxy can route traffic outside of your web server, which happens to be our goal in this case. Be aware that reverse proxy rules can be dangerous if you open sites from inside you network to the world, so just be aware of what you’re doing and why. The next and final step of the template asks a few questions. The first textbox asks the name of the internal web server. In our example, it’s 10.10.0.50:8111. This can be any URL, including a subfolder like internal.mysite.com/blog. Don’t include the http or https here. The template assumes that it’s not entered. You can choose whether to perform SSL Offloading or not. If you leave this checked then all requests to the internal server will be over HTTP regardless of the original web request. This can help with performance and SSL bindings if all requests are within a trusted network. If the network path between the two web servers is not completely trusted and safe then uncheck this. Next, the template enables you to create an outbound rule. This is used to rewrite links in the page to look like your public domain name rather than the internal domain name. Outbound rules have a lot of CPU overhead because the entire web content needs to be parsed and updated. However, if you need it, then it’s well worth the extra CPU hit on the web server. If you check the “Rewrite the domain names of the links in HTTP responses” checkbox then the From textbox will be filled in with what you entered for the inbound rule. You can enter your friendly public URL for the outbound rule. This will essentially replace any reference to 10.10.0.50:8111 (or whatever you enter) with tools.mysite.com in all <a>, <form>, and <img> tags on your site. That’s it! Well, there is a lot more that you can do, this but will give you the base configuration. You can now visit www.mysite.com on your public web server and it will serve up the site from your internal web server. You should see two rules show up; one inbound and one outbound. You can edit these, add conditions, and tweak them further as needed. One common issue that can occur without outbound rules has to do with compression. If you run into errors with the new proxied site, try turning off compression to confirm if that’s the issue. Here’s a link with details on how to deal with compression and outbound rules. I hope this was helpful to get started and to see how easy it is to create a simple reverse proxy using URL Rewrite for IIS.

  Read the article

• Ranking - an Introduction

  - by PointsToShare

  © 2011 By: Dov Trietsch. All rights reserved Ranking Ranking is quite common in the internet. Readers are asked to rank their latest reading by clicking on one of 5 (sometimes 10) stars. The number of stars is then converted to a number and the average number of stars as selected by all the readers is proudly (or shamefully) displayed for future readers. SharePoint 2007 lacked this feature altogether. SharePoint 2010 allows the users to rank items in a list or documents in a library (the two are actually the same because a library is actually a list). But in SP2010 the computation of the average is done later on a timer rather than on-the-spot as it should be. I suspect that the reason for this shortcoming is that they did not involve a mathematician! Let me explain. Ranking is kept in a related list. When a user rates a document the rank-list is added an item with the item id, the user name, and his number of stars. The fact that a user already ranked an item prevents him from ranking it again. This prevents the creator of the item from asking his mother to rank it a 5 and do it 753 times, thus stacking the ballot. Some systems will allow a user to change his rating and this will be done by updating the rank-list item. Now, when the timer kicks off, the list is spanned and for each item the rank-list items containing this id are summed up and divided by the number of votes thus yielding the new average. This is obviously very time consuming and very server intensive. In the 18th century an early actuary named James Dodson used what the great Augustus De Morgan (of De Morgan’s law) later named Commutation tables. The labor involved in computing a life insurance premium was staggering and also very error prone. Clerks with pencil and paper would multiply and add mountains of numbers to do the task. The more steps the greater the probability of error and the more expensive the process. Commutation tables created a “summary” of many steps and reduced the work 100 fold. So had Microsoft taken a lesson in the history of computation, they would have developed a much faster way for rating that may be done in real-time and is also 100 times faster and less CPU intensive. How do we do this? We use a form of commutation. We always keep the number of votes and the total of stars. One simple division gives us the average. So we write an event receiver. When a vote is added, we just add the stars to the total-stars and 1 to the number of votes. We then recomputed the average. When a vote is updated, we reduce the total by the old vote, increase it by the new vote and leave the number of votes the same. Again we do the division to get the new average. When a vote is deleted (highly unlikely and maybe even prohibited), we reduce the total by that vote and reduce the number of votes by 1… Gone are the days of spanning lists, counting items, and tallying votes and we have no need for a timer process to run it all. This is the first of a few treatises on ranking. Even though I discussed the math and the history thereof, in here I am only going to solve the presentation issue. I wanted to create the CSS and Jscript needed to display the stars, create the various effects like hovering and clicking (onmouseover, onmouseout, onclick, etc.) and I wanted to create a general solution with any number of stars. When I had it all done, I created the ranking game so that I could test it. The game is interesting in and on itself, so here it is (or go to the games page and select “rank the stars”). BTW, when you play it, look at the source code and see how it was all done.  Next, how the 5 stars are displayed in the New and Update forms. When the whole set of articles will be done, you’ll be able to create the complete solution. That’s all folks!

  Read the article

• How do you use blog content?

  - by fatherjack

  Do you write a blog, have you ever thought about it? I think people fall into one of a few categories when it comes to blogs, especially blogs with technical content. Writing articles furiously - daily, twice daily and reading dozens of others. Writing the odd piece of content and read plenty of others' output. Started a blog once and its fizzled out but reading lots. Thought about starting a blog someday but never got around to it, hopping into the occasional blog when a link or a Tweet takes them there. Never thought about writing one but often catching content from them when Google (or other preferred search engine) finds content related to their search. Now I am not saying that either of these is right or wrong, nor am I saying that anyone should feel any compulsion to be in any particular category. What I would say is that you as a blog reader have the power to move blog writers from one category to another. How, you might ask? How do I have any power over a blog writer? It is very simple - feedback. If you give feedback then the blog writer knows that they are reaching an audience, if there is no response then they we are simply writing down our thoughts for what could amount to nothing more than a feeble amount of exercise and a few more key stokes towards the onset of RSI. Most blogs have a mechanism to alert the writer when there are comments, and personally speaking, if an email is received saying there has been a response to a blog article then there is a rush of enthusiasm, a moment of excitement that someone is actually reading and considering the text that was submitted and made available for the whole world to read. I am relatively new to this blog game and could be in some extended honeymoon period as I have also recently been incorporated into the Simple Talk 'stable'. I can understand that once you get to the "Dizzy Heights of Ozar" (www.brentozar.com) then getting comments and feedback might not be such a pleasure and may even be rather more of a chore but that, I guess, is the price of fame. For us mere mortals starting out blogging, getting feedback (or even at the moment for me, simply the hope of getting feedback) is what keeps it going. The hope that you will pick a topic that hasn't been done recently by Brad McGehee, Grant Fritchey,  Paul Randall, Thomas LaRock or any one of the dozen of rock star bloggers listed here or others from SQLServerPedia and so on, and then do it well enough to be found, reviewed, or <shudder> (re)tweeted to bring more visitors is what we are striving for, along with the fact that the content we might produce is something that will be of benefit to others. There is only so much point to typing content that no-one is reading and putting it on a blog. You may as well just write it in a diary. A technical blog is not like, say, a blog covering photography techniques where the way to frame and take a picture stands true whether it was written last week, last year or last century - technical content goes sour, quite quickly. There isn't much call for articles about yesterdays technology unless its something that still applies to current versions too, so some content written no more than 2 years ago isn't worth having now. The combination of a piece of content that you know is going to not last long and the fact that no-one reads it is a strong force against writing anything else. Getting feedback counters that despair and gives a value to writing something new. I would say that any feedback is good but there are obviously comments that are just so negative or otherwise badly phrased that they would hasten the demise of a blog but, in general most feedback will encourage a writer. It may not be a comment that supports or agrees with the main theme of a post but if it generates discussion or opens up a previously unexplored viewpoint it is contributing to the blog and is therefore encouraging to the writer. Even if you only say "thank you" before you leave a blog, having taken a section of script to use for yourself or having been given a few links to some content that has widened your knowledge it will be so welcome to the blog owner. Isn't it also the decent thing to do, acknowledging that you have benefited from another's efforts?

  Read the article

• How does one find out which application is associated with an indicator icon?

  - by Amos Annoy

  It is trivial to do this in Ubuntu 10.04. The question is specific to Ubuntu 12.04. some pertinent references (src: answer to What is the difference between indicators and a system tray?: Here is the documentation for indicators: Application indicators | Ubuntu App Developer libindicate Reference Manual libappindicator Reference Manual also DesktopExperienceTeam/ApplicationIndicators - Ubuntu Wiki ref: How can the application that makes an indicator icon be identified? bookmark: How does one find out which application is associated with an indicator icon in Ubuntu 12.04? is a serious question for reasons & problems outlined below and for which a significant investment has been made and is necessary for remedial purposes. reviewing refs. to find an orchestrated resolution ... (an indicator ap. indicator maybe needed) This has nothing to do (does it?) with right click. How can an indicator's icon in Ubuntu 12.04 be matched with the program responsible for it's manifestation on the top panel? A list of running applications can include all processes using System Monitor. How is the correct matching process found for an indicator? How are the sub-indicator applications identified? These are the aps associated with the components of an indicators drop-down menu. (This was to be a separate question and quite naturally follows up the progression. It is included here as it is obvious there is no provisioning to track down offending either sub or indicator aps. easily.) (The examination of SM points out a rather poignant factor in the faster battery depletion and shortened run time - the ambient quiescent CPU rate in 12.04 is now well over 20% when previously, in 10.04, it was well under 10%, between 5% and 7%! - the huge inordinate cpu overhead originates from Xorg and compiz - after booting the system, only SM is run and All Processes are selected, sorting on %CPU - switching between Resources and Processes profiles the execution overhead problem - running another ap like gedit "Text Editor" briefly gives it CPU priority - going back to S&M several aps. are at the top of the list in order: gnome-system-monitor as expected, then: Xorg, compiz, unity-panel-service, hud-service, with dbus-daemon and kworker/x:y's mixed in with some expected daemons and background tasks like nm-applet - not only do Xorg and compiz require excessive CPU time but their entourage has to come along too! further exacerbating the problem - our compute bound tasks no longer work effectively in the field - reduced battery life, reduced CPU time for custom ap.s etc. - and all this precipitated from an examination of what is going on with the battery ap. indicator - this was and is not a flippant, rhetorical or idle musing but has consequences for the credible deployment of 12.04 to reduce the negative impact of its overhead in a production environment) (I have a problem with the battery indicator - it sometimes has % and other times hh:mm - it is necessary to know the ap. & v. to get more info on controlling same. ditto: There are issues with other indicator aps.: NM vs. iwlist/iwconfig conflict, BT ap. vs RF switch, Battery ap. w/ no suspend/sleep for poor battery runtime, ... the list goes on) Details from: How can I find Application Indicator ID's? suggests looking at: file:///usr/share/indicator-application/ordering-override.keyfile [Ordering Index Overrides] nm-applet=1 gnome-power-manager=2 ibus=3 gst-keyboard-xkb=4 gsd-keyboard-xkb=5 which solves the battery ap. identification, and presumably nm is NetworkManager for the rf icon, but the envelope, blue tooth and speaker indicator aps. are still a mystery. (Also, the ordering is not correlated.) Mind you, it was simple in the past to simply right click to get the About option to find the ap. & v. info. browsing around and about: file:///usr/share/indicator-application/ordering-override.keyfile examined: file:///usr/share/indicators file:///usr/share/indicators/messages/applications/ ... perhaps?/presumably? the information sought may be buried in file:///usr/share/indicators A reference in the comments was given to: What is the difference between indicators and a system tray? quoting from that source ... Unfortunately desktop indicators are not well documented yet: I couldn't find any specification doc ... Well ... the actual document https://wiki.ubuntu.com/DesktopExperienceTeam/ApplicationIndicators#Summary does not help much but it's existential information provides considerable insight ...

  Read the article

• Windows Workflow Foundation (WF) and things I wish were more intuitive

  - by pjohnson

  I've started using Windows Workflow Foundation, and so far ran into a few things that aren't incredibly obvious. Microsoft did a good job of providing a ton of samples, which is handy because you need them to get anywhere with WF. The docs are thin, so I've been bouncing between samples and downloadable labs to figure out how to implement various activities in a workflow. Code separation or not? You can create a workflow and activity in Visual Studio with or without code separation, i.e. just a .cs "Component" style object with a Designer.cs file, or a .xoml XML markup file with code behind (beside?) it. Absence any obvious advantage to one or the other, I used code separation for workflows and any complex custom activities, and without code separation for custom activities that just inherit from the Activity class and thus don't have anything special in the designer. So far, so good. Workflow Activity Library project type - What's the point of this separate project type? So far I don't see much advantage to keeping your custom activities in a separate project. I prefer to have as few projects as needed (and no fewer). The Designer's Toolbox window seems to find your custom activities just fine no matter where they are, and the debugging experience doesn't seem to be any different. Designer Properties - This is about the designer, and not specific to WF, but nevertheless something that's hindered me a lot more in WF than in Windows Forms or elsewhere. The Properties window does a good job of showing you property values when you hover the mouse over the values. But they don't do the same to find out what a control's type is. So maybe if I named all my activities "x1" and "x2" instead of helpful self-documenting names like "listenForStatusUpdate", then I could easily see enough of the type to determine what it is, but any names longer than those and all I get of the type is "System.Workflow.Act" or "System.Workflow.Compone". Even hitting the dropdown doesn't expand any wider, like the debugger quick watch "smart tag" popups do when you scroll through members. The only way I've found around this in VS 2008 is to widen the Properties dialog, losing precious designer real estate, then shrink it back down when you're done to see what you were doing. Really? WF Designer - This is about the designer, and I believe is specific to WF. I should be able to edit the XML in a .xoml file, or drag and drop using the designer. With WPF (at least in VS 2010 Ultimate), these are side by side, and changes to one instantly update the other. With WF, I have to right-click on the .xoml file, choose Open With, and pick XML Editor to edit the text. It looks like this is one way where WF didn't get the same attention WPF got during .NET Fx 3.0 development. Service - In the WF world, this is simply a class that talks to the workflow about things outside the workflow, not to be confused with how the term "service" is used in every other context I've seen in the Windows and .NET world, i.e. an executable that waits for events or requests from a client and services them (Windows service, web service, WCF service, etc.). ListenActivity - Such a great concept, yet so unintuitive. It seems you need at least two branches (EventDrivenActivity instances), one for your positive condition and one for a timeout. The positive condition has a HandleExternalEventActivity, and the timeout has a DelayActivity followed by however you want to handle the delay, e.g. a ThrowActivity. The timeout is simple enough; wiring up the HandleExternalEventActivity is where things get fun. You need to create a service (see above), and an interface for that service (this seems more complex than should be necessary--why not have activities just wire to a service directly?). And you need to create a custom EventArgs class that inherits from ExternalDataEventArgs--you can't create an ExternalDataEventArgs event handler directly, even if you don't need to add any more information to the event args, despite ExternalDataEventArgs not being marked as an abstract class, nor a compiler error nor warning nor any other indication that you're doing something wrong, until you run it and find that it always times out and get to check every place mentioned here to see why. Your interface and service need an event that consumes your custom EventArgs class, and a method to fire that event. You need to call that method from somewhere. Then you get to hope that you did everything just right, or that you can step through code in the debugger before your Delay timeout expires. Yes, it's as much fun as it sounds. TransactionScopeActivity - I had the bright idea of putting one in as a placeholder, then filling in the database updates later. That caused this error: The workflow hosting environment does not have a persistence service as required by an operation on the workflow instance "[GUID]". ...which is about as helpful as "Object reference not set to an instance of an object" and even more fun to debug. Google led me to this Microsoft Forums hit, and from there I figured out it didn't like that the activity had no children. Again, a Validator on TransactionScopeActivity would have pointed this out to me at design time, rather than handing me a nearly useless error at runtime. Easily enough, I disabled the activity and that fixed it. I still see huge potential in my work where WF could make things easier and more flexible, but there are some seriously rough edges at the moment. Maybe I'm just spoiled by how much easier and more intuitive development elsewhere in the .NET Framework is.

  Read the article

• Responsible BI for Excel, Even for Older Versions

  - by andrewbrust

  On Wednesday, I will have the honor of co-presenting, for both The Data Warehouse Institute (TDWI) and the New York Technology Council. on the subject of Excel and BI. My co-presenter will be none other than Bill Baker, who was a Microsoft Distinguished Engineer and, essentially, the father of BI at that company.  Details on the events are here and here. We'll be talking about PowerPivot, of course, but that's not all. Probably even more important than any one product, will be our discussion of whether the usual characterization of Excel as the nemesis of IT, the guilty pleasure of business users and the antithesis of formal BI is really valid and/or hopelessly intractable. Without giving away our punchline, I'll tell you that we are much more optimistic than that. There are huge upsides to Excel and while there are real dangers to using it in the BI space, there are standards and practices you can employ to ensure Excel is used responsibly. And when those practices are followed, Excel becomes quite powerful indeed. One of the keys to this is using Excel as a data consumer rather than data storage mechanism. Caching data in Excel is OK, but only if that data is (a) not modified and (b) configured for automated periodic refresh. PowerPivot meets both criteria -- it stores a read-only copy of your data in the form of a model, and once workbook containing a PowerPivot model is published to SharePoint, it can be configured for scheduled data refresh, on the server, requiring no user intervention whatsoever. Data refresh is a bit like hard drive backup: it will only happen reliably if it's automated, and super-easy to configure. PowerPivot hits a real home run here (as does Windows Home Server for PC backup, but I digress). The thing about PowerPivot is that it's an add-in for Excel 2010. What if you're not planning to go to that new version for quite a while? What if you’ve just deployed Office 2007 in your organization? What if you're still on Office 2003, or an even earlier version? What can you do immediately to share data responsibly and easily? As it turns out, there's a feature in Excel that's been around for quite a while, that can help: Web Queries.  The Web Query feature was introduced, ostensibly, to allow Excel to pull data in from Internet Web pages…for example, data in a stock quote history table will come in nicely, as will any data in a Web page that is displayed in an HTML table.  To use the feature In Excel 2007 or 2010, click the Data Tab or the ribbon and click the “From Web” button towards the left; in older versions use the corresponding option in  the menu or  toolbars.  Next, paste a URL into the resulting dialog box and tap Enter or click the Go button.  A preview of the Web page will come up, and the dialog will allow you to select the specific table within the page whose data you’d like to import.  Here’s an example: Now just click the table, click the Import button, and the Import Data dialog appears.  You can simply click OK to bring in your data or you can first click the Properties… button and configure the data import to be refreshed at an interval in minutes that you select.  Now your data’s in the spreadsheet and ready to worked with: Your data may be vulnerable to modification, but if you’ve set up the data refresh, any accidental or malicious changes will be corrected in time anyway. The thing about this feature is that it’s most useful not for public Web pages, but for pages behind the firewall.  In effect, the Web Query feature provides an incredibly easy way to consume data in Excel that’s “published” from an application.  Users just need a URL.  They don’t need to know server and database names and since the data is read-only, providing credentials may be unnecessary, or can be handled using integrated security.  If that’s not good enough, the Web Query can be saved to a special .iqy file, which can be edited to provide POST parameter data. The only requirement is that the data must be provided in an HTML table, with the first row providing the column names.  From an ASP.NET project, it couldn’t be easier: a simple bound GridView control is totally compatible.  Use a data source control with it, and you don’t even have to write any code.  Users can link to pages that are part of an application’s UI, or developers can create pages that are specially designed for the purpose of providing an interface to the Web Query import feature.  And none of this is Microsoft- or .NET-specific.  You can create pages in any language you want (PHP comes to mind) that output the result set of a query in HTML table format, and then consume that data in a Web Query.  Then build PivotTables and charts on the data, and in Excel 2007 or 2010 you can use conditional formatting to create scorecards and dashboards. This strategy allows you to create pages that function quite similarly to the OData XML feeds rendered when .NET developers create an “Astoria” WCF Data Service.  And while it’s cool that PowerPivot and Excel 2010 can import such OData feeds, it’s good to know that older versions of Excel can function in a similar fashion, and can consume data produced by virtually any Web development platform. As a final matter, instead of just telling you that “older versions” of Excel support this feature, I’ll be more specific.  To discover what the first version of Excel was to support Web queries, go to http://bit.ly/OldSchoolXL.

  Read the article

• 3 Ways to Make Steam Even Faster

  - by Chris Hoffman

  Have you ever noticed how slow Steam’s built-in web browser can be? Do you struggle with slow download speeds? Or is Steam just slow in general? These tips will help you speed it up. Steam isn’t a game itself, so there are no 3D settings to change to achieve maximum performance. But there are some things you can do to speed it up dramatically. Speed Up the Steam Web Browser Steam’s built-in web browser — used in both the Steam store and in Steam’s in-game overlay to provide a web browser you can quickly use within games – can be frustratingly slow on many systems. Rather than the typical speed we’ve come to expect from Chrome, Firefox, or even Internet Explorer, Steam seems to struggle. When you click a link or go to a new page, there’s a noticeable delay before the new page appears — something that doesn’t happen in desktop browsers. Many people seem to have made peace with this slowness, accepting that Steam’s built-in browser is just bad. However, there’s a trick that will eliminate this delay on many systems and make the Steam web browser fast. This problem seems to arise from an incompatibility with the Automatically Detect Proxy Settings option, which is enabled by default on Windows. This is a compatibility option that very few people should actually need, so it’s safe to disable it. To disable this option, open the Internet Options dialog — press the Windows key to access the Start menu or Start screen, type Internet Options, and click the Internet Options shortcut. Select the Connections tab in the Internet Options window and click the LAN settings button. Uncheck the Automatically detect settings option here, then click OK to save your settings. If you experienced a significant delay every time a web page loaded in Steam’s web browser, it should now be gone. In the unlikely event that you encounter some sort of problem with your network connection, you could always re-enable this option. Increase Steam’s Game Download Speed Steam attempts to automatically select the nearest download server to your location. However, it may not always select the ideal download server. Or, in the case of high-traffic events like big seasonal sales and huge game launches, you may benefit from selecting a less-congested server. To do this, open Steam’s settings by clicking the Steam menu in Steam and selecting Settings. Click over to the Downloads tab and select the closest download server from the Download Region box. You should also ensure that Steam’s download bandwidth isn’t limited from here. You may want to restart Steam and see if your download speeds improve after changing this setting. In some cases, the closest server might not be the fastest. One a bit farther away could be faster if your local server is more congested, for example. Steam once provided information about content server load, which allowed you to select a regional server that wasn’t under high-load, but this information no longer seems to be available. Steam still provides a page that shows you the amount of download activity happening in different regions, including statistics about the difference in download speeds in different US states, but this information isn’t as useful. Accelerate Steam and Your Games One way to speed up all your games — and Steam itself —  is by getting a solid-state drive and installing Steam to it. Steam allows you to easily move your Steam folder — at C:\Program Files (x86)\Steam by default — to another hard drive. Just move it like you would any other folder. You can then launch the Steam.exe program as if you had never moved Steam’s files. Steam also allows you to configure multiple game library folders. This means that you can set up a Steam library folder on a solid-state drive and one on your larger magnetic hard drive. Install your most frequently played games to the solid-state drive for maximum speed and your less frequently played ones to the slower magnetic hard drive to save SSD space. To set up additional library folders, open Steam’s Settings window and click the Downloads tab. You’ll find the Steam Library Folders option here. Click the Add Library Folder button and create a new game library on another hard drive. When you install a game in Steam, you’ll be asked which library folder you want to install it to. With the proxy compatibility option disabled, the correct download server chosen, and Steam installed to a fast SSD, it should be a speed demon. There’s not much more you can do to speed up Steam, short of upgrading other hardware like your computer’s CPU. Image Credit: Andrew Nash on Flickr     

  Read the article

• Remote Debug Windows Azure Cloud Service

  - by Shaun

  Originally posted on: http://geekswithblogs.net/shaunxu/archive/2013/11/02/remote-debug-windows-azure-cloud-service.aspxOn the 22nd of October Microsoft Announced the new Windows Azure SDK 2.2. It introduced a lot of cool features but one of it shocked most, which is the remote debug support for Windows Azure Cloud Service (a.k.a. WACS).   Live Debug is Nightmare for Cloud Application When we are developing against public cloud, debug might be the most difficult task, especially after the application had been deployed. In order to minimize the debug effort, Microsoft provided local emulator for cloud service and storage once the Windows Azure platform was announced. By using local emulator developers could be able run their application on local machine with almost the same behavior as running on Windows Azure, and that could be debug easily and quickly. But when we deployed our application to Azure, we have to use log, diagnostic monitor to debug, which is very low efficient. Visual Studio 2012 introduced a new feature named "anonymous remote debug" which allows any workstation under any user could be able to attach the remote process. This is less secure comparing the authenticated remote debug but much easier and simpler to use. Now in Windows Azure SDK 2.2, we could be able to attach our application from our local machine to Windows Azure, and it's very easy.   How to Use Remote Debugger First, let's create a new Windows Azure Cloud Project in Visual Studio and selected ASP.NET Web Role. Then create an ASP.NET WebForm application. Then right click on the cloud project and select "publish". In the publish dialog we need to make sure the application will be built in debug mode, since .NET assembly cannot be debugged in release mode. I enabled Remote Desktop as I will log into the virtual machine later in this post. It's NOT necessary for remote debug. And selected "advanced settings" tab, make sure we checked "Enable Remote Debugger for all roles". In WACS, a cloud service could be able to have one or more roles and each role could be able to have one or more instances. The remote debugger will be enabled for all roles and all instances if we checked. Currently there's no way for us to specify which role(s) and which instance(s) to enable. Finally click "publish" button. In the windows azure activity window in Visual Studio we can find some information about remote debugger. To attache remote process would be easy. Open the "server explorer" window in Visual Studio and expand "cloud services" node, find the cloud service, role and instance we had just published and wanted to debug, right click on the instance and select "attach debugger". Then after a while (it's based on how fast our Internet connect to Windows Azure Data Center) the Visual Studio will be switched to debug mode. Let's add a breakpoint in the default web page's form load function and refresh the page in browser to see what's happen. We can see that the our application was stopped at the breakpoint. The call stack, watch features are all available to use. Now let's hit F5 to continue the step, then back to the browser we will find the page was rendered successfully.   What Under the Hood Remote debugger is a WACS plugin. When we checked the "enable remote debugger" in the publish dialog, Visual Studio will add two cloud configuration settings in the CSCFG file. Since they were appended when deployment, we cannot find in our project's CSCFG file. But if we opened the publish package we could find as below. At the same time, Visual Studio will generate a certificate and included into the package for remote debugger. If we went to the azure management portal we will find there will a certificate under our application which was created, uploaded by remote debugger plugin. Since I enabled Remote Desktop there will be two certificates in the screenshot below. The other one is for remote debugger. When our application was deployed, windows azure system will open related ports for remote debugger. As below you can see there are two new ports opened on my application. Finally, in our WACS virtual machine, windows azure system will copy the remote debug component based on which version of Visual Studio we are using and start. Our application then can be debugged remotely through the visual studio remote debugger. Below is the task manager on the virtual machine of my WACS application.   Summary In this post I demonstrated one of the feature introduced in Windows Azure SDK 2.2, which is Remote Debugger. It allows us to attach our application from local machine to windows azure virtual machine once it had been deployed. Remote debugger is powerful and easy to use, but it brings more security risk. And since it's only available for debug build this means the performance will be worse than release build. Hence we should only use this feature for staging test and bug fix (publish our beta version to azure staging slot), rather than for production.   Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

  Read the article

• How to restore your production database without needing additional storage

  - by David Atkinson

  Production databases can get very large. This in itself is to be expected, but when a copy of the database is needed the database must be restored, requiring additional and costly storage.  For example, if you want to give each developer a full copy of your production server, you'll need n times the storage cost for your n-developer team. The same is true for any test databases that are created during the course of your project lifecycle. If you've read my previous blog posts, you'll be aware that I've been focusing on the database continuous integration theme. In my CI setup I create a "production"-equivalent database directly from its source control representation, and use this to test my upgrade scripts. Despite this being a perfectly valid and practical thing to do as part of a CI setup, it's not the exact equivalent to running the upgrade script on a copy of the actual production database. So why shouldn't I instead simply restore the most recent production backup as part of my CI process? There are two reasons why this would be impractical. 1. My CI environment isn't an exact copy of my production environment. Indeed, this would be the case in a perfect world, and it is strongly recommended as a good practice if you follow Jez Humble and David Farley's "Continuous Delivery" teachings, but in practical terms this might not always be possible, especially where storage is concerned. It may just not be possible to restore a huge production database on the environment you've been allotted. 2. It's not just about the storage requirements, it's also the time it takes to do the restore. The whole point of continuous integration is that you are alerted as early as possible whether the build (yes, the database upgrade script counts!) is broken. If I have to run an hour-long restore each time I commit a change to source control I'm just not going to get the feedback quickly enough to react. So what's the solution? Red Gate has a technology, SQL Virtual Restore, that is able to restore a database without using up additional storage. Although this sounds too good to be true, the explanation is quite simple (although I'm sure the technical implementation details under the hood are quite complex!) Instead of restoring the backup in the conventional sense, SQL Virtual Restore will effectively mount the backup using its HyperBac technology. It creates a data and log file, .vmdf, and .vldf, that becomes the delta between the .bak file and the virtual database. This means that both read and write operations are permitted on a virtual database as from SQL Server's point of view it is no different from a conventional database. Instead of doubling the storage requirements upon a restore, there is no 'duplicate' storage requirements, other than the trivially small virtual log and data files (see illustration below). The benefit is magnified the more databases you mount to the same backup file. This technique could be used to provide a large development team a full development instance of a large production database. It is also incredibly easy to set up. Once SQL Virtual Restore is installed, you simply run a conventional RESTORE command to create the virtual database. This is what I have running as part of a nightly "release test" process triggered by my CI tool. RESTORE DATABASE WidgetProduction_virtual FROM DISK=N'C:\WidgetWF\ProdBackup\WidgetProduction.bak' WITH MOVE N'WidgetProduction' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_WidgetProduction_Virtual.vmdf', MOVE N'WidgetProduction_log' TO N'C:\WidgetWF\ProdBackup\WidgetProduction_log_WidgetProduction_Virtual.vldf', NORECOVERY, STATS=1, REPLACE GO RESTORE DATABASE mydatabase WITH RECOVERY   Note the only change from what you would do normally is the naming of the .vmdf and .vldf files. SQL Virtual Restore intercepts this by monitoring the extension and applies its magic, ensuring the 'virtual' restore happens rather than the conventional storage-heavy restore. My automated release test then applies the upgrade scripts to the virtual production database and runs some validation tests, giving me confidence that were I to run this on production for real, all would go smoothly. For illustration, here is my 8Gb production database: And its corresponding backup file: Here are the .vldf and .vmdf files, which represent the only additional used storage for the new database following the virtual restore.   The beauty of this product is its simplicity. Once it is installed, the interaction with the backup and virtual database is exactly the same as before, as the clever stuff is being done at a lower level. SQL Virtual Restore can be downloaded as a fully functional 14-day trial. Technorati Tags: SQL Server

  Read the article

• Dynamically switching the theme in Orchard

  - by Bertrand Le Roy

  It may sound a little puzzling at first, but in Orchard CMS, more than one theme can be active at any given time. The reason for that is that we have an extensibility point that allows a module (or a theme) to participate in the choice of the theme to use, for each request. The motivation for building the theme engine this way was to enable developers to switch themes based on arbitrary criteria, such as user preferences or the user agent (if you want to serve a mobile theme for phones for example). The choice is made between the active themes, which is why there is a difference between the default theme and the active themes. In order to have a say in the choice of the theme, all you have to do is implement IThemeSelector. That interface is quite simple as it only has one method, GetTheme, that takes the current RequestContext and returns a ThemeSelectorResult or null if the implementation of the interface does not want to participate in the current request (we'll see an example in a moment). ThemeSelectorResult itself is just a ThemeName string property and an integer Priority. We're using a priority so that an arbitrary number of implementations of IThemeSelector can contribute to the choice of a theme. If you look for existing implementations of the interface in Orchard, you'll find four: AdminThemeSelector: selects the TheAdmin theme with a very high priority (100) if the current request is for a page that is part of the admin. Otherwise, null is returned, which enables other implementations to choose the theme. PreviewThemeSelector: selects the preview theme if there is one, with a high priority (90), and null otherwise. This enables administrators to view the site under a different theme while everybody else continues to see the current default theme. SiteThemeSelector: this is the implementation that is doing what you expect most of the time, which is to get the current theme from site settings and set it with a priority of –5. SafeModeThemeSelector: this is the fallback implementation, which should almost never win. It sets the theme as the safe mode theme, which has no style and just uses the default templates for everything. The priority is very low (-100). While this extensibility mechanism is great to have, I wanted to bring that level of choice into the hands of the site administrator rather than just developers. In order to achieve that, I built the Vandelay Theme Picker module. The module provides administration UI to create rules for theme selection. It provides its own extensibility point (the IThemeSelectionRule interface) and one implementation of a rule: UserAgentThemeSelectorRule. This rule gets the current user agent from the context and tries to match it with a regular expression that the administrator can configure in the admin UI. You can for example configure a rule with a regular expression that matches IE6 and serve a different subtheme where the stylesheet has been tweaked for such an antique browser. Another possible configuration is to detect mobile devices from their agent string and serve the mobile theme. All those operations can be done with this module entirely from the admin UI, without writing a line of code. The module also offers the administrator the opportunity to inject a link into the front-end in a specific zone and with a specific position that enables the user to switch to the default theme if he wishes to. This is especially useful for sites that use a mobile theme but still want to allow users to use the full desktop site. While the module is nice and flexible, it may be overkill. On my own personal blog, I have only two active themes: the desktop theme and the mobile theme. I'm fine with going into code to change the criteria on which to switch the theme, so I'm not using my own Theme Picker module. Instead, I made the mobile theme a theme with code (in other words there is a csproj file in the theme). The project includes a single C# file, my MobileThemeSelector for which the code is the following: public class MobileThemeSelector : IThemeSelector { private static readonly Regex _Msie678 = new Regex(@"^Mozilla\/4\.0 \(compatible; MSIE [678]" + @"\.0; Windows NT \d\.\d(.*)\)$", RegexOptions.IgnoreCase); private ThemeSelectorResult _requestCache; private bool _requestCached; public ThemeSelectorResult GetTheme(RequestContext context) { if (_requestCached) return _requestCache; _requestCached = true; var userAgent = context.HttpContext.Request.UserAgent; if (userAgent.IndexOf("phone", StringComparison.OrdinalIgnoreCase) != -1 || _Msie678.IsMatch(userAgent) || userAgent.IndexOf("windows live writer", StringComparison.OrdinalIgnoreCase) != -1) { _requestCache = new ThemeSelectorResult { Priority = 10, ThemeName = "VuLuMobile" }; } return _requestCache; } } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } The theme selector selects the current theme for Internet Explorer versions 6 to 8, for phones, and for Windows Live Writer (so that the theme that is used when I write posts is as simple as possible). What's interesting here is that it's the theme that selects itself here, based on its own criteria. This should give you a good panorama of what's possible in terms of dynamic theme selection in Orchard. I hope you find some fun uses for it. As usual, I can't wait to see what you're going to come up with…

  Read the article

• SQL SERVER – Columnstore Index and sys.dm_db_index_usage_stats

  - by pinaldave

  As you know I have been writing on Columnstore Index for quite a while. Recently my friend Vinod Kumar wrote about  SQL Server 2012: ColumnStore Characteristics. A fantastic read on the subject if you have yet not caught up on that subject. After the blog post I called him and asked what should I write next on this subject. He suggested that I should write on DMV script which I have prepared related to Columnstore when I was writing our SQL Server Questions and Answers book. When we were writing this book SQL Server 2012 CTP versions were available. I had written few scripts related to SQL Server columnstore Index. I like Vinod’s idea and I decided to write about DMV, which we did not cover in the book as SQL Server 2012 was not released yet. We did not want to talk about the product which was not yet released. The first script which I had written was with DMV - sys.column_store_index_stats. This DMV was displaying the statistics of the columnstore indexes. When I attempted to run it on SQL Server 2012 RTM it gave me error suggesting that this DMV does not exists. Here is the script which I ran: SELECT * FROM sys.column_store_index_stats; It generated following error: Msg 208, Level 16, State 1, Line 1 Invalid object name ‘column_store_index_stats’. I was pretty confident that this DMV was available when I had written the scripts. The next reaction was to type ‘sys.’ only in SSMS and wait for intelisense to popup DMV list. I scrolled down and noticed that above said DMV did not exists there as well. Now this is not bug or missing feature. This was indeed something can happen because the version which I was practicing was early CTP version. If you go to the page of the DMV here, it clearly stats notice on the top of the page. This documentation is for preview only, and is subject to change in later releases. Now this was not alarming but my next thought was if this DMV is not there where can I find the information which this DMV was providing. Well, while I was thinking about this, I noticed that my another friend Balmukund Lakhani was online on personal messenger. Well, Balmukund is “Know All” kid. I have yet to find situation where I have not got my answers from him. I immediately pinged him and asked the question regarding where can I find information of ‘column_store_index_stats’. His answer was very abrupt but enlightening for sure. Here is our conversation: Pinal: Where can I find information of column_store_index_stats? Balmukund: Assume you have never worked with CTP before and now try to find the information which you are trying to find. Honestly  it was fantastic response from him. I was confused as I have played extensively with CTP versions of SQL Server 2012. Now his response give me big hint. I should have not looked for DMV but rather should have focused on what I wanted to do. I wanted to retrieve the statistics related to the index. In SQL Server 2008/R2, I was able to retrieve the statistics of the index from the DMV - sys.dm_db_index_usage_stats. I used the same DMV on SQL Server 2012 and it did retrieved the necessary information for me. Here is the updated script which gave me all the necessary information I was looking for. Matter of the fact, if I have used my earlier SQL Server 2008 R2 script this would have just worked fine. SELECT DB_NAME(Database_ID) DBName, SCHEMA_NAME(schema_id) AS SchemaName, OBJECT_NAME(ius.OBJECT_ID) ObjName, i.type_desc, i.name, user_seeks, user_scans, user_lookups, user_updates,* FROM sys.dm_db_index_usage_stats ius INNER JOIN sys.indexes i ON i.index_id = ius.index_id AND ius.OBJECT_ID = i.OBJECT_ID INNER JOIN sys.tables t ON t.OBJECT_ID = i.OBJECT_ID GO Let us see the resultset of above query. You will notice that column Type_desc describes the type of the index. You can additionally write WHERE condition on the column and only retrieve only selected type of Index. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: PostADay, SQL, SQL Authority, SQL Index, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Getting started with Oracle Database In-Memory Part III - Querying The IM Column Store

  - by Maria Colgan

  In my previous blog posts, I described how to install, enable, and populate the In-Memory column store (IM column store). This weeks post focuses on how data is accessed within the IM column store. Let’s take a simple query “What is the most expensive air-mail order we have received to date?” SELECT Max(lo_ordtotalprice) most_expensive_order FROM lineorderWHERE  lo_shipmode = 5; The LINEORDER table has been populated into the IM column store and since we have no alternative access paths (indexes or views) the execution plan for this query is a full table scan of the LINEORDER table. You will notice that the execution plan has a new set of keywords “IN MEMORY" in the access method description in the Operation column. These keywords indicate that the LINEORDER table has been marked for INMEMORY and we may use the IM column store in this query. What do I mean by “may use”? There are a small number of cases were we won’t use the IM column store even though the object has been marked INMEMORY. This is similar to how the keyword STORAGE is used on Exadata environments. You can confirm that the IM column store was actually used by examining the session level statistics, but more on that later. For now let's focus on how the data is accessed in the IM column store and why it’s faster to access the data in the new column format, for analytical queries, rather than the buffer cache. There are four main reasons why accessing the data in the IM column store is more efficient. 1. Access only the column data needed The IM column store only has to scan two columns – lo_shipmode and lo_ordtotalprice – to execute this query while the traditional row store or buffer cache has to scan all of the columns in each row of the LINEORDER table until it reaches both the lo_shipmode and the lo_ordtotalprice column. 2. Scan and filter data in it's compressed format When data is populated into the IM column it is automatically compressed using a new set of compression algorithms that allow WHERE clause predicates to be applied against the compressed formats. This means the volume of data scanned in the IM column store for our query will be far less than the same query in the buffer cache where it will scan the data in its uncompressed form, which could be 20X larger. 3. Prune out any unnecessary data within each column The fastest read you can execute is the read you don’t do. In the IM column store a further reduction in the amount of data accessed is possible due to the In-Memory Storage Indexes(IM storage indexes) that are automatically created and maintained on each of the columns in the IM column store. IM storage indexes allow data pruning to occur based on the filter predicates supplied in a SQL statement. An IM storage index keeps track of minimum and maximum values for each column in each of the In-Memory Compression Unit (IMCU). In our query the WHERE clause predicate is on the lo_shipmode column. The IM storage index on the lo_shipdate column is examined to determine if our specified column value 5 exist in any IMCU by comparing the value 5 to the minimum and maximum values maintained in the Storage Index. If the value 5 is outside the minimum and maximum range for an IMCU, the scan of that IMCU is avoided. For the IMCUs where the value 5 does fall within the min, max range, an additional level of data pruning is possible via the metadata dictionary created when dictionary-based compression is used on IMCU. The dictionary contains a list of the unique column values within the IMCU. Since we have an equality predicate we can easily determine if 5 is one of the distinct column values or not. The combination of the IM storage index and dictionary based pruning, enables us to only scan the necessary IMCUs. 4. Use SIMD to apply filter predicates For the IMCU that need to be scanned Oracle takes advantage of SIMD vector processing (Single Instruction processing Multiple Data values). Instead of evaluating each entry in the column one at a time, SIMD vector processing allows a set of column values to be evaluated together in a single CPU instruction. The column format used in the IM column store has been specifically designed to maximize the number of column entries that can be loaded into the vector registers on the CPU and evaluated in a single CPU instruction. SIMD vector processing enables the Oracle Database In-Memory to scan billion of rows per second per core versus the millions of rows per second per core scan rate that can be achieved in the buffer cache. I mentioned earlier in this post that in order to confirm the IM column store was used; we need to examine the session level statistics. You can monitor the session level statistics by querying the performance views v$mystat and v$statname. All of the statistics related to the In-Memory Column Store begin with IM. You can see the full list of these statistics by typing: display_name format a30 SELECT display_name FROM v$statname WHERE  display_name LIKE 'IM%'; If we check the session statistics after we execute our query the results would be as follow; SELECT Max(lo_ordtotalprice) most_expensive_order FROM lineorderWHERE lo_shipmode = 5; SELECT display_name FROM v$statname WHERE  display_name IN ('IM scan CUs columns accessed',                        'IM scan segments minmax eligible',                        'IM scan CUs pruned'); As you can see, only 2 IMCUs were accessed during the scan as the majority of the IMCUs (44) in the LINEORDER table were pruned out thanks to the storage index on the lo_shipmode column. In next weeks post I will describe how you can control which queries use the IM column store and which don't. +Maria Colgan

  Read the article

• Better documentation for tasks waiting on resources

  - by SQLOS Team

  The sys.dm_os_waiting_tasks DMV contains a wealth of useful information about tasks waiting on a resource, but until now detailed information about the resource being consumed - sys.dm_os_waiting_tasks.resource_description - hasn't been documented, apart from a rather self-evident "Description of the resource that is being consumed."   Thanks to a recent Connect suggestion this column will get more information added. Here is a summary of the possible values that can appear in this column - Note this information is current for SQL Server 2008 R2 and Denali:   Thread-pool resource owner:•       threadpool id=scheduler<hex-address> Parallel query resource owner:•       exchangeEvent id={Port|Pipe}<hex-address> WaitType=<exchange-wait-type> nodeId=<exchange-node-id> Exchange-wait-type can be one of the following.•       e_waitNone•       e_waitPipeNewRow•       e_waitPipeGetRow•       e_waitSynchronizeConsumerOpen•       e_waitPortOpen•       e_waitPortClose•       e_waitRange Lock resource owner:<type-specific-description> id=lock<lock-hex-address> mode=<mode> associatedObjectId=<associated-obj-id>               <type-specific-description> can be:• For DATABASE: databaselock subresource=<databaselock-subresource> dbid=<db-id>• For FILE: filelock fileid=<file-id> subresource=<filelock-subresource> dbid=<db-id>• For OBJECT: objectlock lockPartition=<lock-partition-id> objid=<obj-id> subresource=<objectlock-subresource> dbid=<db-id>• For PAGE: pagelock fileid=<file-id> pageid=<page-id> dbid=<db-id> subresource=<pagelock-subresource>• For Key: keylock  hobtid=<hobt-id> dbid=<db-id>• For EXTENT: extentlock fileid=<file-id> pageid=<page-id> dbid=<db-id>• For RID: ridlock fileid=<file-id> pageid=<page-id> dbid=<db-id>• For APPLICATION: applicationlock hash=<hash> databasePrincipalId=<role-id> dbid=<db-id>• For METADATA: metadatalock subresource=<metadata-subresource> classid=<metadatalock-description> dbid=<db-id>• For HOBT: hobtlock hobtid=<hobt-id> subresource=<hobt-subresource> dbid=<db-id>• For ALLOCATION_UNIT: allocunitlock hobtid=<hobt-id> subresource=<alloc-unit-subresource> dbid=<db-id> <mode> can be:• Sch-S• Sch-M• S• U• X• IS• IU• IX• SIU• SIX• UIX• BU• RangeS-S• RangeS-U• RangeI-N• RangeI-S• RangeI-U• RangeI-X• RangeX-S• RangeX-U• RangeX-X External resource owner:•       External ExternalResource=<wait-type> Generic resource owner:•       TransactionMutex TransactionInfo Workspace=<workspace-id>•       Mutex•       CLRTaskJoin•       CLRMonitorEvent•       CLRRWLockEvent•       resourceWait Latch resource owner:•       <db-id>:<file-id>:<page-in-file>•       <GUID>•       <latch-class> (<latch-address>)   Further Information Slava Oks's weblog: sys.dm_os_waiting_tasks.Informit.com: Identifying Blocking Using sys.dm_os_waiting_tasks - Ken Henderson   - Guy

  Read the article

• Android - Switching Activities with a Tab Layout

  - by Bill Osuch

  This post is based on the Tab Layout  tutorial on the Android developers site, with some modifications. I wanted to get rid of the icons (they take up too much screen real estate), and modify the fonts on the tabs. First, create a new Android project, with an Activity called TabWidget. Then, create two additional Activities called TabOne and TabTwo. Throw a simple TextView on each one with a message identifying the tab, like this: public class TabTwo extends Activity {  @Override  public void onCreate(Bundle savedInstanceState) {   super.onCreate(savedInstanceState);   TextView tv = new TextView(this);   tv.setText("This is tab 2");   setContentView(tv);  } } And don't forget to add them to your AndroidManifest.xml file: <activity android:name=".TabOne"></activity> <activity android:name=".TabTwo"></activity> Now we'll create the tab layout - open the res/layout/main.xml file and insert the following: <?xml version="1.0" encoding="utf-8"?> <TabHost xmlns:android="http://schemas.android.com/apk/res/android"  android:id="@android:id/tabhost"  android:layout_width="fill_parent"  android:layout_height="fill_parent">  <LinearLayout   android:orientation="vertical"   android:layout_width="fill_parent"   android:layout_height="fill_parent">   <TabWidget    android:id="@android:id/tabs"    android:layout_width="fill_parent"    android:layout_height="wrap_content" />   <FrameLayout    android:id="@android:id/tabcontent"             android:layout_width="fill_parent"    android:layout_height="fill_parent" />  </LinearLayout> </TabHost> Finally, we'll create the code needed to populate the TabHost. Make sure your TabWidget class extends TabActivity rather than Activity, and add code to grab the TabHost and create an Intent to launch a new Activity:    TabHost tabHost = getTabHost();  // The activity TabHost    TabHost.TabSpec spec;  // Reusable TabSpec for each tab    Intent intent;  // Reusable Intent for each tab       // Create an Intent to launch an Activity for the tab (to be reused)    intent = new Intent().setClass(this, TabOne.class); Add the first tab to the layout:    // Initialize a TabSpec for each tab and add it to the TabHost    spec = tabHost.newTabSpec("tabOne");      spec.setContent(intent);     spec.setIndicator("Tab One");     tabHost.addTab(spec); It's pretty tall as-is, so we'll shorten it:   // Squish the tab a little bit horizontally   tabHost.getTabWidget().getChildAt(0).getLayoutParams().height = 40; But the text is a little small, so let's increase the font size:   // Bump the text size up   LinearLayout ll = (LinearLayout) tabHost.getChildAt(0);   android.widget.TabWidget tw = (android.widget.TabWidget) ll.getChildAt(0);   RelativeLayout rllf = (RelativeLayout) tw.getChildAt(0);   TextView lf = (TextView) rllf.getChildAt(1);   lf.setTextSize(20); Do the same for the second tab, and you wind up with this: @Override     public void onCreate(Bundle savedInstanceState) {         super.onCreate(savedInstanceState);         setContentView(R.layout.main);                 TabHost tabHost = getTabHost();  // The activity TabHost         TabHost.TabSpec spec;  // Reusable TabSpec for each tab         Intent intent;  // Reusable Intent for each tab            // Create an Intent to launch an Activity for the tab (to be reused)         intent = new Intent().setClass(this, TabOne.class);         // Initialize a TabSpec for each tab and add it to the TabHost         spec = tabHost.newTabSpec("tabOne");           spec.setContent(intent);          spec.setIndicator("Tab One");          tabHost.addTab(spec);         // Squish the tab a little bit horizontally         tabHost.getTabWidget().getChildAt(0).getLayoutParams().height = 40;         // Bump the text size up         LinearLayout ll = (LinearLayout) tabHost.getChildAt(0);         android.widget.TabWidget tw = (android.widget.TabWidget) ll.getChildAt(0);         RelativeLayout rllf = (RelativeLayout) tw.getChildAt(0);         TextView lf = (TextView) rllf.getChildAt(1);         lf.setTextSize(20);            // Do the same for the other tabs         intent = new Intent().setClass(this, TabTwo.class);         spec = tabHost.newTabSpec("tabTwo");          spec.setContent(intent);          spec.setIndicator("Tab Two");         tabHost.addTab(spec);         tabHost.getTabWidget().getChildAt(1).getLayoutParams().height = 40;         RelativeLayout rlrf = (RelativeLayout) tw.getChildAt(1);         TextView rf = (TextView) rlrf.getChildAt(1);         rf.setTextSize(20);            tabHost.setCurrentTab(0);     } Save and fire up the emulator, and you should be able to switch back and forth between your tabs!

  Read the article

• Mixed Emotions: Humans React to Natural Language Computer

  - by Applications User Experience

  There was a big event in Silicon Valley on Tuesday, November 15. Watson, the natural language computer developed at IBM Watson Research Center in Yorktown Heights, New York, and its inventor and principal research investigator, David Ferrucci, were guests at the Computer History Museum in Mountain View, California for another round of the television game Jeopardy. You may have read about or watched on YouTube how Watson beat Ken Jennings and Brad Rutter, two top Jeopardy competitors, last February. This time, Watson swept the floor with two Silicon Valley high-achievers, one a venture capitalist with a background  in math, computer engineering, and physics, and the other a technology and finance writer well-versed in all aspects of culture and humanities. Watson is the product of the DeepQA research project, which attempts to create an artificially intelligent computing system through advances in natural language processing (NLP), among other technologies. NLP is a computing strategy that seeks to provide answers by processing large amounts of unstructured data contained in multiple large domains of human knowledge. There are several ways to perform NLP, but one way to start is by recognizing key words, then processing  contextual  cues associated with the keyword concepts so that you get many more “smart” (that is, human-like) deductions,  rather than a series of “dumb” matches.  Jeopardy questions often require more than key word matching to get the correct answer; typically several pieces of information put together, often from vastly different categories, to come up with a satisfactory word string solution that can be rephrased as a question.  Smarter than your average search engine, but is it as smart as a human? Watson was especially fast at descrambling mixed-up state capital names, and recalling and pairing movie titles where one started and the other ended in the same word (e.g., Billion Dollar Baby Boom, where both titles used the word Baby). David said they had basically removed the variable of how fast Watson hit the buzzer compared to human contestants, but frustration frequently appeared on the faces of the contestants beaten to the punch by Watson. David explained that top Jeopardy winners like Jennings achieved their success with a similar strategy, timing their buzz to the end of the reading of the clue,  and “running the board”, being first to respond on about 60% of the clues.  Similar results for Watson. It made sense that Watson would be good at the technical and scientific stuff, so I figured the venture capitalist was toast. But I thought for sure Watson would lose to the writer in categories such as pop culture, wines and foods, and other humanities. Surprisingly, it held its own. I was amazed it could recognize a word definition of a syllogism in the category of philosophy. So what was the audience reaction to all of this? We started out expecting our formidable human contestants to easily run some of their categories; however, they started off on the wrong foot with the state capitals which Watson could unscramble so efficiently. By the end of the first round, contestants and the audience were feeling a little bit, well, …. deflated. Watson was winning by about $13,000, and the humans had gone into negative dollars. The IBM host said he was going to “slow Watson down a bit,” and the humans came back with respectable scores in Double Jeopardy. This was partially thanks to a very sympathetic audience (and host, also a human) providing “group-think” on many questions, especially baseball ‘s most valuable players, which by the way, couldn’t have been hard because even I knew them.  Yes, that’s right, the humans cheated. Since Watson could speak but not hear us (it didn’t have speech recognition capability), it was probably unaware of this. In Final Jeopardy, the single question had to do with law. I was sure Watson would blow this one, but all contestants were able to answer correctly about a copyright law. In a career devoted to making computers more helpful to people, I think I may have seen how a computer can do too much. I’m not sure I’d want to work side-by-side with a Watson doing my job. Certainly listening and empathy are important traits we humans still have over Watson.  While there was great enthusiasm in the packed room of computer scientists and their friends for this standing-room-only show, I think it made several of us uneasy (especially the poor human contestants whose egos were soundly bashed in the first round). This computer system, by the way , only took 4 years to program. David Ferrucci mentioned several practical uses for Watson, including medical diagnoses and legal strategies. Are you “the expert” in your job? Imagine NLP computing on an Oracle database.   This may be the user interface of the future to enable users to better process big data. How do you think you’d like it? Postscript: There were three little boys sitting in front of me in the very first row. They looked, how shall I say it, … unimpressed!

  Read the article

• IBM "per core" comparisons for SPECjEnterprise2010

  - by jhenning

  I recently stumbled upon a blog entry from Roman Kharkovski (an IBM employee) comparing some SPECjEnterprise2010 results for IBM vs. Oracle. Mr. Kharkovski's blog claims that SPARC delivers half the transactions per core vs. POWER7. Prior to any argument, I should say that my predisposition is to like Mr. Kharkovski, because he says that his blog is intended to be factual; that the intent is to try to avoid marketing hype and FUD tactic; and mostly because he features a picture of himself wearing a bike helmet (me too). Therefore, in a spirit of technical argument, rather than FUD fight, there are a few areas in his comparison that should be discussed. Scaling is not free For any benchmark, if a small system scores 13k using quantity R1 of some resource, and a big system scores 57k using quantity R2 of that resource, then, sure, it's tempting to divide: is  13k/R1 > 57k/R2 ? It is tempting, but not necessarily educational. The problem is that scaling is not free. Building big systems is harder than building small systems. Scoring  13k/R1  on a little system provides no guarantee whatsoever that one can sustain that ratio when attempting to handle more than 4 times as many users. Choosing the denominator radically changes the picture When ratios are used, one can vastly manipulate appearances by the choice of denominator. In this case, lots of choices are available for the resource to be compared (R1 and R2 above). IBM chooses to put cores in the denominator. Mr. Kharkovski provides some reasons for that choice in his blog entry. And yet, it should be noted that the very concept of a core is: arbitrary: not necessarily comparable across vendors; fluid: modern chips shift chip resources in response to load; and invisible: unless you have a microscope, you can't see it. By contrast, one can actually see processor chips with the naked eye, and they are a bit easier to count. If we put chips in the denominator instead of cores, we get: 13161.07 EjOPS / 4 chips = 3290 EjOPS per chip for IBM vs 57422.17 EjOPS / 16 chips = 3588 EjOPS per chip for Oracle The choice of denominator makes all the difference in the appearance. Speaking for myself, dividing by chips just seems to make more sense, because: I can see chips and count them; and I can accurately compare the number of chips in my system to the count in some other vendor's system; and Tthe probability of being able to continue to accurately count them over the next 10 years of microprocessor development seems higher than the probability of being able to accurately and comparably count "cores". SPEC Fair use requirements Speaking as an individual, not speaking for SPEC and not speaking for my employer, I wonder whether Mr. Kharkovski's blog article, taken as a whole, meets the requirements of the SPEC Fair Use rule www.spec.org/fairuse.html section I.D.2. For example, Mr. Kharkovski's footnote (1) begins Results from http://www.spec.org as of 04/04/2013 Oracle SUN SPARC T5-8 449 EjOPS/core SPECjEnterprise2010 (Oracle's WLS best SPECjEnterprise2010 EjOPS/core result on SPARC). IBM Power730 823 EjOPS/core (World Record SPECjEnterprise2010 EJOPS/core result) The questionable tactic, from a Fair Use point of view, is that there is no such metric at the designated location. At www.spec.org, You can find the SPEC metric 57422.17 SPECjEnterprise2010 EjOPS for Oracle and You can also find the SPEC metric 13161.07 SPECjEnterprise2010 EjOPS for IBM. Despite the implication of the footnote, you will not find any mention of 449 nor anything that says 823. SPEC says that you can, under its fair use rule, derive your own values; but it emphasizes: "The context must not give the appearance that SPEC has created or endorsed the derived value." Substantiation and transparency Although SPEC disclaims responsibility for non-SPEC information (section I.E), it says that non-SPEC data and methods should be accurate, should be explained, should be substantiated. Unfortunately, it is difficult or impossible for the reader to independently verify the pricing: Were like units compared to like (e.g. list price to list price)? Were all components (hw, sw, support) included? Were all fees included? Note that when tpc.org shows IBM pricing, there are often items such as "PROCESSOR ACTIVATION" and "MEMORY ACTIVATION". Without the transparency of a detailed breakdown, the pricing claims are questionable. T5 claim for "Fastest Processor" Mr. Kharkovski several times questions Oracle's claim for fastest processor, writing You see, when you publish industry benchmarks, people may actually compare your results to other vendor's results. Well, as we performance people always say, "it depends". If you believe in performance-per-core as the primary way of looking at the world, then yes, the POWER7+ is impressive, spending its chip resources to support up to 32 threads (8 cores x 4 threads). Or, it just might be useful to consider performance-per-chip. Each SPARC T5 chip allows 128 hardware threads to be simultaneously executing (16 cores x 8 threads). The Industry Standard Benchmark that focuses specifically on processor chip performance is SPEC CPU2006. For this very well known and popular benchmark, SPARC T5: provides better performance than both POWER7 and POWER7+, for 1 chip vs. 1 chip, for 8 chip vs. 8 chip, for integer (SPECint_rate2006) and floating point (SPECfp_rate2006), for Peak tuning and for Base tuning. For example, at the 8-chip level, integer throughput (SPECint_rate2006) is: 3750 for SPARC 2170 for POWER7+. You can find the details at the March 2013 BestPerf CPU2006 page SPEC is a trademark of the Standard Performance Evaluation Corporation, www.spec.org. The two specific results quoted for SPECjEnterprise2010 are posted at the URLs linked from the discussion. Results for SPEC CPU2006 were verified at spec.org 1 July 2013, and can be rechecked here.

  Read the article

• Keep it Professional &ndash; Multiple Environments

  - by AjarnMark

  I have certainly been reading blogs a whole lot more than writing them the last several weeks, and it’s about time I got back to writing.  I have been collecting several topics and references for blog posts…some of which will probably just never get written as the timeliness of the topics fade over time.  Nonetheless, I’m back, and I think it is time to revive my Doing Business Right series, this time coming from the slant of managing a development team rather than the previous angle of being self-employed.  First up: separating Dev, Test, and Prod. A few months ago, Colin Stasiuk (@BenchmarkIT) wrote a great post about separating your Dev, Test/UAT, and Prod environments.  This post covers all the important points such as removing Developer access from both PROD and UAT, and the importance of proper deployment (a.k.a. promotion) procedures.  I won’t repeat it all here, go read the original!  But what I do want to address is what I believe to be the #1 excuse people use for not having separate environments:  Money.  I discussed this briefly in my comment on Colin’s post at the time, but let me repeat it here and expand on it a bit. Don’t let the size of your company or the size of its budget dictate whether you do things professionally or not.  I am convinced that most developers and development teams would agree that it is a best practice to have separate environments for development, testing, and production (a.k.a. Live).  So why don’t they?  Because they think that it means separate servers which means more money.  While having separate physical servers for the different environments would be ideal, it is not an absolute requirement in order to make this work.  Here are a few ideas: Use multiple instances of SQL Server and multiple Web Sites with Headers or Ports.  For no additional fees* you can install multiple instances of SQL Server on the same machine.  This gives you a nice separation, allowing you to even use the same database names as will appear in PROD, yet isolating the data and security access.  And in IIS, you can create multiple Web Sites on the same server just by using Host Headers or different port numbers to separate them.  This approach does still pose the risk of non-Prod environments impacting performance on Prod, but when your application is busy enough for that to be a concern, you can probably afford one of the other options. Use desktop PCs instead of servers.  Instead of investing in full server-grade hardware, you can mimic the separate environments on old desktop PCs and at least get functional equivalency, if not performance matching.  The last I checked, Microsoft did not require separate licensing for SQL Server if that installation was used exclusively for dev or test purposes*.  There may be some version or performance differences between this approach and what you have in Prod, but you have isolated test from impacting Prod resources this way. Virtualization.  This is of course one of the hot topics of the day, and I would be remiss if I did not suggest this.  It is quite easy these days to setup virtual machines so that, again, your environments are fairly isolated from one another, and you retain all the security and procedural benefits of having separate environments. So the point is, keep your high professional standards intact.  You don’t need to compromise on using proper procedure just because you work in a small company with a small budget.  Keep doing things the right way! By the way, where I work, our DEV environment is not on a server.  All development is done on the developer’s individual workstation where it can be isolated from other developers’ work for the duration of writing the code, but also where the developers have to reconcile (merge) differences in code under concurrent development.  This usually means that each change is executed multiple times (once per developer to update their environments with the latest changes from others) giving us an extra, informal. test deployment before even going to the Test/UAT server.  It also means that if the network goes down, the developers can continue to hum along because they are not dependent on networked resources.  In fact, they will likely be even more productive because they aren’t being interrupted by email…but that’s another post I need to write. * I am not a lawyer, nor a licensing specialist, but it appeared to be so the last time I checked.  When in doubt, consult an expert on the topic.

  Read the article

• Kendo UI Mobile with Knockout for Master-Detail Views

  - by Steve Michelotti

  Lately I’ve been playing with Kendo UI Mobile to build iPhone apps. It’s similar to jQuery Mobile in that they are both HTML5/JavaScript based frameworks for buildings mobile apps. The primary thing that drew me to investigate Kendo UI was its innate ability to adaptively render a native looking app based on detecting the device it’s currently running on. In other words, it will render to look like a native iPhone app if it’s running on an iPhone and it will render to look like a native Droid app if it’s running on a Droid. This is in contrast to jQuery Mobile which looks the same on all devices and, therefore, it can never quite look native for whatever device it’s running on. My first impressions of Kendo UI were great. Using HTML5 data-* attributes to define “roles” for UI elements is easy, the rendering looked great, and the basic navigation was simple and intuitive. However, I ran into major confusion when trying to figure out how to “correctly” build master-detail views. Since I was already very family with KnockoutJS, I set out to use that framework in conjunction with Kendo UI Mobile to build the following simple scenario: I wanted to have a simple “Task Manager” application where my first screen just showed a list of tasks like this:   Then clicking on a specific task would navigate to a detail screen that would show all details of the specific task that was selected:   Basic navigation between views in Kendo UI is simple. The href of an <a> tag just needs to specify a hash tag followed by the ID of the view to navigate to as shown in this jsFiddle (notice the href of the <a> tag matches the id of the second view):   Direct link to jsFiddle: here. That is all well and good but the problem I encountered was: how to pass data between the views? Specifically, I need the detail view to display all the details of whichever task was selected. If I was doing this with my typical technique with KnockoutJS, I know exactly what I would do. First I would create a view model that had my collection of tasks and a property for the currently selected task like this: 1: function ViewModel() { 2: var self = this; 3: self.tasks = ko.observableArray(data); 4: self.selectedTask = ko.observable(null); 5: } Then I would bind my list of tasks to the unordered list - I would attach a “click” handler to each item (each <li> in the unordered list) so that it would select the “selectedTask” for the view model. The problem I found is this approach simply wouldn’t work for Kendo UI Mobile. It completely ignored the click handlers that I was trying to attach to the <a> tags – it just wanted to look at the href (at least that’s what I observed). But if I can’t intercept this, then *how* can I pass data or any context to the next view? The only thing I was able to find in the Kendo documentation is that you can pass query string arguments on the view name you’re specifying in the href. This enabled me to do the following: Specify the task ID in each href – something like this: <a href=”#taskDetail?id=3></a> Attach an “init method” (via the “data-show” attribute on the details view) that runs whenever the view is activated Inside this “init method”, grab the task ID passed from the query string to look up the item from my view model’s list of tasks in order to set the selected task I was able to get all that working with about 20 lines of JavaScript as shown in this jsFiddle. If you click on the Results tab, you can navigate between views and see the the detail screen is correctly binding to the selected item:   Direct link to jsFiddle: here.   With all that being done, I was very happy to get it working with the behavior I wanted. However, I have no idea if that is the “correct” way to do it or if there is a “better” way to do it. I know that Kendo UI comes with its own data binding framework but my preference is to be able to use (the well-documented) KnockoutJS since I’m already familiar with that framework rather than having to learn yet another new framework. While I think my solution above is probably “acceptable”, there are still a couple of things that bug me about it. First, it seems odd that I have to loop through my items to *find* my selected item based on the ID that was passed on the query string - normally, with Knockout I can just refer directly to my selected item from where it was used. Second, it didn’t feel exactly right that I had to rely on the “data-show” method of the details view to set my context – normally with Knockout, I could just attach a click handler to the <a> tag that was actually clicked by the user in order to set the “selected item.” I’m not sure if I’m being too picky. I know there are many people that have *way* more expertise in Kendo UI compared to me – I’d be curious to know if there are better ways to achieve the same results.

  Read the article

• Stand-Up Desk 2012 Update

  - by BuckWoody

  One of the more popular topics here on my technical blog doesn't have to do with technology, per-se - it's about the choice I made to go to a stand-up desk work environment. If you're interested in the history of those, check here: Stand-Up Desk Part One Stand-Up Desk Part Two I have made some changes and I was asked to post those here.Yes, I'm still standing - I think the experiment has worked well, so I'm continuing to work this way. I've become so used to it that I notice when I sit for a long time. If I'm flying, or driving a long way, or have long meetings, I take breaks to stand up and move around. That being said, I don't stand as much as I did. I started out by standing the entire day - which did not end well. As you can read in my second post, I found that sitting down for a few minutes each hour worked out much better. And over time I would say that I now stand about 70-80% of the day, depending on the day. Some days I don't even notice I'm standing, so I don't sit as often. Other days I find that I really tire quickly - so I sit more often. But in both cases, I stand more than I sit. In the first post you can read about how I used a simple coffee-table from Ikea to elevate my desktop to the right height. I then adjusted the height where I stand by using a small plastic square and some carpet. Over time I found this did not work as well as I'd like. The primary reason is that the front of these are at the same depth - so my knees would hit the desk or table when I sat down. Also, the desk was at a certain height, and I had to adjust, rather than the other way around.  Also, I like a lot of surface area on top of a desk - almost more of a table. Routing cables and wiring was a pain, and of course moving it was out of the question.   So I've changed what I use. I found a perfect solution for what I was looking for - industrial wire shelving: I bought one, built only half of it (for the right height I wanted) and arranged the shelves the way I wanted. I then got a 5'x4' piece of wood from Lowes, and mounted it to where the top was balanced, but had an over-hang  I could get my knees under easily.My wife sewed a piece of fake-leather for the top. This arrangement provides the following benefits: Very strong Rolls easily, wheels can lock to prevent rolling Long, wide shelves Wire-frame allows me to route any kind of wiring and other things all over the desk I plugged in my UPS and ran it's longer power-cable to the wall outlet. I then ran the router's LAN connection along that wire, and covered both with a large insulation sleeve. I then plugged in everything to the UPS, and routed all the wiring. I can now roll the desk almost anywhere in the room so that I can record, look out the window, get closer to or farther away from the door and more. I put a few boxes on the shelves as "drawers" and tidied that part up. Even my printer fits on a shelf. Laser-dog not included - some assembly required In the second post you can read about the bar-stool I purchased from Target for the desk. I cheaped-out on this one, and it proved to be a bad choice. Because I had to raise it so high, and was constantly sitting on it and then standing up, the gas-cylinder in it just gave out. So it became a very short stool that I ended up getting rid of. In the end, this one from Ikea proved to be a better choice: And so this arrangement is working out perfectly. I'm finding myself VERY productive this way. I hope these posts help you if you decide to try working at a stand-up desk. Although I was skeptical at first, I've found it to be a very healthy, easy way to code, design and especially present over a web-cam. It's natural to stand to speak when you're presenting, and it feels more energetic than sitting down to talk to others.

  Read the article

• Trigger Happy

  - by Tim Dexter

  Its been a while, I know, we’ll say no more OK? I’ll just write …In the latest BIP 11.1.1.6 release and if I’m really honest; the release before this (we'll call it dot 5 for brevity.) The boys and gals in the engine room have been real busy enhancing BIP with some new functionality. Those of you that use the scheduling engine in OBIEE may already know and use the ‘conditional scheduling’ feature. This allows you to be more intelligent about what reports get run and sent to folks on a scheduled basis. You create a ‘trigger’ analysis (answer) that is executed at schedule time prior to the main report. When the schedule rolls around, the trigger is run, if it returns rows, then the main report is run and delivered. If there are no rows returned, then the main report is not run. Useful right? Your users are not bombarded with 20 reports in their inbox every week that they need to wade throu. They get a handful that they know they need to look at. If you ensure you use conditional formatting in the report then they can find the anomalous data in the reports very quickly and move on to the rest of their day more quickly. You could even think of OBIEE as a virtual team member, scouring the data on your behalf 24/7 and letting you know when its found an issue.BI Publisher, wanting the team t-shirt and the khaki pants, has followed suit. You can now set up ‘triggers’ for it to execute before it runs the main report. Just like its big brother, if the scheduled report trigger returns rows of data; it then executes the main report. Otherwise, the report is skipped until the next schedule time rolls around. Sound familiar?BIP differs a little, in that you only need to construct a query to act as the trigger rather than a complete report. Let assume we have a monthly wage by department report on a schedule. We only want to send the report to managers if their departmental wages reach and/or exceed a certain amount. The toughest part about this is coming up with the SQL to test the business rule you want to implement. For my example, its not that tough: select d.department_name, sum(e.salary) as wage_total from employees e, departments d where d.department_id = e.department_id group by d.department_name having sum(e.salary) > 230000 We're looking for departments where the wage cost is greater than 230,000 Dexter Dollars! With a bit of messing I found out you can parametrize the query. Users can then set a value at schedule time if they need to. To create the trigger is straightforward enough. You can create multiple triggers for users to select at schedule time. Notice I also used a parameter in the query, :wamount. Note the matching parameter in the tree on the left. You also dont need to return multiple columns, one is fine, the key is if there are rows returned. You can build the rest of your report as usual. At scheduling time the Schedule tab has a bit more on it. If your users want to set the trigger, they check the Use Trigger box. The page will then pop fields to pick the appropriate trigger they want to use, even a trigger on another data model if needed. Note it will also ask for the parameter value associated with the trigger. At this point you should note that the data model does not make a distinction between trigger and data model (extract) parameters. So users will see the parameters on the General and Schedule tabs. If per chance you do need to just have a trigger parameters. You can just hide them from the report using the Parameters popup in the report designer, just un-check the 'Show' box I have tested the opposite case where you do not want main report parameters seen in the trigger section. BIP handles that for you! Once the report hits its allotted schedule time, the trigger is executed. Based on the results the report will either run or be 'skipped.' Now, you have a smarter scheduler that will only deliver reports when folks need to see them and take action on the contents. More official info here for developers and here for users.

  Read the article

• Normal maps red in OpenGL?

  - by KaiserJohaan

  I am using Assimp to import 3d models, and FreeImage to parse textures. The problem I am having is that the normal maps are actually red rather than blue when I try to render them as normal diffuse textures. http://i42.tinypic.com/289ing3.png When I open the images in a image-viewing program they do indeed show up as blue. Heres when I create the texture; OpenGLTexture::OpenGLTexture(const std::vector<uint8_t>& textureData, uint32_t textureWidth, uint32_t textureHeight, TextureType textureType, Logger& logger) : mLogger(logger), mTextureID(gNextTextureID++), mTextureType(textureType) { glGenTextures(1, &mTexture); CHECK_GL_ERROR(mLogger); glBindTexture(GL_TEXTURE_2D, mTexture); CHECK_GL_ERROR(mLogger); glTexImage2D(GL_TEXTURE_2D, 0, GL_RGBA, textureWidth, textureHeight, 0, glTextureFormat, GL_UNSIGNED_BYTE, &textureData[0]); CHECK_GL_ERROR(mLogger); glGenerateMipmap(GL_TEXTURE_2D); CHECK_GL_ERROR(mLogger); glBindTexture(GL_TEXTURE_2D, 0); CHECK_GL_ERROR(mLogger); } Here is my fragment shader. You can see I just commented out the normal-map parsing and treated the normal map texture as the diffuse texture to display it and illustrate the problem. As for the rest of the code it interacts as expected with the diffuse textures so I dont see a obvious problem there. "#version 330 \n \ \n \ layout(std140) uniform; \n \ \n \ const int MAX_LIGHTS = 8; \n \ \n \ struct Light \n \ { \n \ vec4 mLightColor; \n \ vec4 mLightPosition; \n \ vec4 mLightDirection; \n \ \n \ int mLightType; \n \ float mLightIntensity; \n \ float mLightRadius; \n \ float mMaxDistance; \n \ }; \n \ \n \ uniform UnifLighting \n \ { \n \ vec4 mGamma; \n \ vec3 mViewDirection; \n \ int mNumLights; \n \ \n \ Light mLights[MAX_LIGHTS]; \n \ } Lighting; \n \ \n \ uniform UnifMaterial \n \ { \n \ vec4 mDiffuseColor; \n \ vec4 mAmbientColor; \n \ vec4 mSpecularColor; \n \ vec4 mEmissiveColor; \n \ \n \ bool mHasDiffuseTexture; \n \ bool mHasNormalTexture; \n \ bool mLightingEnabled; \n \ float mSpecularShininess; \n \ } Material; \n \ \n \ uniform sampler2D unifDiffuseTexture; \n \ uniform sampler2D unifNormalTexture; \n \ \n \ in vec3 frag_position; \n \ in vec3 frag_normal; \n \ in vec2 frag_texcoord; \n \ in vec3 frag_tangent; \n \ in vec3 frag_bitangent; \n \ \n \ out vec4 finalColor; " " \n \ \n \ void CalcGaussianSpecular(in vec3 dirToLight, in vec3 normal, out float gaussianTerm) \n \ { \n \ vec3 viewDirection = normalize(Lighting.mViewDirection); \n \ vec3 halfAngle = normalize(dirToLight + viewDirection); \n \ \n \ float angleNormalHalf = acos(dot(halfAngle, normalize(normal))); \n \ float exponent = angleNormalHalf / Material.mSpecularShininess; \n \ exponent = -(exponent * exponent); \n \ \n \ gaussianTerm = exp(exponent); \n \ } \n \ \n \ vec4 CalculateLighting(in Light light, in vec4 diffuseTexture, in vec3 normal) \n \ { \n \ if (light.mLightType == 1) // point light \n \ { \n \ vec3 positionDiff = light.mLightPosition.xyz - frag_position; \n \ float dist = max(length(positionDiff) - light.mLightRadius, 0); \n \ \n \ float attenuation = 1 / ((dist/light.mLightRadius + 1) * (dist/light.mLightRadius + 1)); \n \ attenuation = max((attenuation - light.mMaxDistance) / (1 - light.mMaxDistance), 0); \n \ \n \ vec3 dirToLight = normalize(positionDiff); \n \ float angleNormal = clamp(dot(normalize(normal), dirToLight), 0, 1); \n \ \n \ float gaussianTerm = 0.0; \n \ if (angleNormal > 0.0) \n \ CalcGaussianSpecular(dirToLight, normal, gaussianTerm); \n \ \n \ return diffuseTexture * (attenuation * angleNormal * Material.mDiffuseColor * light.mLightIntensity * light.mLightColor) + \n \ (attenuation * gaussianTerm * Material.mSpecularColor * light.mLightIntensity * light.mLightColor); \n \ } \n \ else if (light.mLightType == 2) // directional light \n \ { \n \ vec3 dirToLight = normalize(light.mLightDirection.xyz); \n \ float angleNormal = clamp(dot(normalize(normal), dirToLight), 0, 1); \n \ \n \ float gaussianTerm = 0.0; \n \ if (angleNormal > 0.0) \n \ CalcGaussianSpecular(dirToLight, normal, gaussianTerm); \n \ \n \ return diffuseTexture * (angleNormal * Material.mDiffuseColor * light.mLightIntensity * light.mLightColor) + \n \ (gaussianTerm * Material.mSpecularColor * light.mLightIntensity * light.mLightColor); \n \ } \n \ else if (light.mLightType == 4) // ambient light \n \ return diffuseTexture * Material.mAmbientColor * light.mLightIntensity * light.mLightColor; \n \ else \n \ return vec4(0.0); \n \ } \n \ \n \ void main() \n \ { \n \ vec4 diffuseTexture = vec4(1.0); \n \ if (Material.mHasDiffuseTexture) \n \ diffuseTexture = texture(unifDiffuseTexture, frag_texcoord); \n \ \n \ vec3 normal = frag_normal; \n \ if (Material.mHasNormalTexture) \n \ { \n \ diffuseTexture = vec4(normalize(texture(unifNormalTexture, frag_texcoord).xyz * 2.0 - 1.0), 1.0); \n \ // vec3 normalTangentSpace = normalize(texture(unifNormalTexture, frag_texcoord).xyz * 2.0 - 1.0); \n \ //mat3 tangentToWorldSpace = mat3(normalize(frag_tangent), normalize(frag_bitangent), normalize(frag_normal)); \n \ \n \ // normal = tangentToWorldSpace * normalTangentSpace; \n \ } \n \ \n \ if (Material.mLightingEnabled) \n \ { \n \ vec4 accumLighting = vec4(0.0); \n \ \n \ for (int lightIndex = 0; lightIndex < Lighting.mNumLights; lightIndex++) \n \ accumLighting += Material.mEmissiveColor * diffuseTexture + \n \ CalculateLighting(Lighting.mLights[lightIndex], diffuseTexture, normal); \n \ \n \ finalColor = pow(accumLighting, Lighting.mGamma); \n \ } \n \ else { \n \ finalColor = pow(diffuseTexture, Lighting.mGamma); \n \ } \n \ } \n"; Why is this? does normal-map textures need some sort of special treatment in opengl?

  Read the article

• Common usecases and techniques when integrating a 3rd party application with Oracle Sales Cloud

  - by asantaga

  Over the last year or so I've see a lot of partners migrating and integrate their applications with Oracle Sales Cloud. Interestingly I'd say 60% of the partners use the same set of design patterns over and over again. Most of the time I see that they want to embed their application into Oracle Sales Cloud, within a tab usually, perhaps click on a link to their application (passing some piece of data + credentials) and then within their application update sales cloud again using webservices. Here are some examples of the different use-cases I've seen , and how partners are embedding their applications into Sales Cloud, NB : The following examples use the "Desktop" User Interface rather than the Newer "Simplified User Interface", I'll update the sample application soon but the integration patterns are precisely the same Use Case 1 :  Navigator "Link out" to third party application This is an example of where the developer has added a link to the global navigator and this links out to the 3rd Party Application. Typically one doesn't pass any contextual data with the exception of perhaps user credentials, or better still JWT Token. Techniques Used   Adding Link to Menu Item Using JWT Token in Sales Cloud Use Case 2 : Application Embedded within the Sales Cloud Dashboard Within the Oracle Sales Cloud application there is a tab called "Sales", within this tab its possible to embed a SubTab and embed a iFrame pointing to your application. To do this the developer simply needs to edit the page in customization mode, add the tab and then add the iFrame, simples! The developer can pass credentials/JWT Token and some other pieces of data but not object data (ie the current OpportunityID etc)  Techniques Used Adding a page to the dashboard  Using JWT Token in Sales Cloud  Use Case 3 : Embedding a Tab and Context Linking out from a Sales Cloud object to the 3rd party application In this usecase the developer embeds two components into Oracle Sales Cloud. The first is a SubTab showing summary data to the user (a quote in our case) and then secondly a hyperlink, (although it could be a button) which when clicked navigates the user to the 3rd party application. In this case the developer almost always passes context specific data (i.e. the opportunityId) and a security token (username password combo or JWT Token). The third party application usually takes the data, perhaps queries more data using the Sales Cloud SOAP/WebService interface and then displays the resulting mashup to the user for further processing. When the user has finished their work in the 3rd party application they normally navigate back to Oracle Sales Cloud using what's called a "DeepLink", ie taking them back to the object [opportunity in our case] they came from. This image visually shows a "Happy Path" a user may follow, and combines linking out to an application , webservice calls and deep linking back to Sales Cloud. Techniques Used Extending a SalesCloud application with a custom button Using JWT Token in Sales Cloud Extending Oracle Sales Cloud [Opportnity] with a custom tab exposing External Content Retrieving Data from Oracle Sales cloud using WebServices Coding some groovy script to generate the URLs required (Doc 1571200.1 on MyOracle Support) DeepLinking to specific Oracle Sales Cloud Pages (Doc 1516151.1 on My Oracle Support) Use-Case 4 :  Server Side processing/synchronization This usecase focuses on the Server Side processing of data, in this case synchronizing data. Here the 3rd party application is running on a "timer", e.g. cron or similar, and when triggered it queries data from Oracle Sales Cloud, then it queries data from the 3rd party application, determines the deltas and then inserts the data where required. Specifically here we are calling Oracle Sales Cloud using SOAP/WebServices and the 3rd party application is being communicated to using the REST API, for Oracle Sales Cloud one would use standard JAX-WS WebService calls and for REST one would use the JAX-RS api and perhap the Jackson api for managing JSON objects.. This is a very common use case and one which specifically lends itself to using the Oracle Java Cloud Service as the ideal application server where to host the mediator between the two applications.  Techniques Used Using JWT Token in Sales Cloud Integrating with the Oracle Java Cloud Service Retrieving Data from Oracle Sales cloud using WebServices General Resources The above is just a small set of techniques and use-cases which are used today. There are plenty of other sources of documentation and resources available on the internet but to get you started here are a few of my favourite places  Sales Cloud General Documentation Sales Cloud Customize Tab is useful for general customization of Sales Cloud Sales Cloud Integration Tab focuses on the 3rd party integration techniques  Official Oracle Fusion Developer Relations Blog Official Oracle Fusion Developer Relations YouTube Channel Enjoy integrating! 

  Read the article

• Tuning Red Gate: #2 of Many

  - by Grant Fritchey

  In the last installment, I used the SQL Monitor tool to get a snapshot view of the current state of the servers at Red Gate that are giving us trouble. That snapshot suggested some areas where I should focus some time, primarily in which queries were being called most frequently or were running the longest. But, you don't want to just run off & start tuning queries. Remember, the foundation for query tuning is the server itself. So, I want to be sure I'm not looking at some major hardware or configuration issues that I need to address first. Rather than look at the current status of the server, I'm going to look at historical data. Clicking on the Analysis tab of SQL Monitor I get a whole list of counters that I can look at. More importantly, I can look at them over a period of time. Even more importantly, I can compare past periods with current periods to see if we're looking at a progressive issue or not. There are counters here that will give me an indication of load, and there are counters here that will tell me specifics about that load. First, I want to just look at the load to understand where the pain points might be. Trying to drill down before you have detailed information is just bad planning. First thing I'm going to check is the CPU, just to see what's up there. I have two servers I'm interested in, so I'll show you both: Looking at the last 30 days for both servers, well, let's just say that the first server is about what I would expect. It has an average baseline behavior with occasional, regular, peaks. This looks like a system with a fairly steady & predictable load that probably has a nightly batch process that spikes the processor. In short, normal stuff. The points there where the CPU drops radically. that might be worth investigating further because something changed the processing on this system a lot. But the first server. It's all over the place. There's no steady CPU behavior at all. It's spike high for long periods of time. It's up, it's down. I'm really going to have to spend time looking at CPU issues on this server to try to figure out what's up. It might be other processes being shared on the server, it might be something else. Either way, I'm going to have to spend time evaluating this CPU, especially those peeks about a week ago. Looking at the Pages/sec, again, just a measure of load, I see that there are some peaks on the rg-sql02 server, but over all, it looks like a fairly standard load. Plus, the peaks are only up to 550 pages/sec. Remember, this isn't a performance measure, but just a load measurement, but from this, I don't think we're looking at major memory issues, but I may want to correlate these counters with the CPU counters. Again, the other server looks like there's stuff going on. The load is not at all consistent. In fact there was a point earlier in the year that looks pretty severe. Plus the spikes here are twice the size of the other system. We've got a lot more load going on here and I will probably need to drill down on memory usage on this server. Taking a look at the disk transfers/sec the load on both systems seems to roughly correspond to the other load indicators. Notice that drop right in the middle of the graph for rg-sql02. I wonder if the office was closed over that period or a system was down for maintenance. If I saw spikes in memory or disk that corresponded to the drip in CPU, you can assume something was using those other resources and causing a drop, but when everything goes down, it just means that the system isn't gettting used. The disk on the rg-sql01 system isn't spiking exactly the same way as the memory & cpu, so there's a good chance (chance mind you) that any performance issues might not be disk related. However, notice that huge jump at the beginning of the month. Several disks were used more than they were for the rest of the month. That's the load on the server. What about the load on SQL Server itself? Next time.

  Read the article

• Design review for application facing memory issues

  - by Mr Moose

  I apologise in advance for the length of this post, but I want to paint an accurate picture of the problems my app is facing and then pose some questions below; I am trying to address some self inflicted design pain that is now leading to my application crashing due to out of memory errors. An abridged description of the problem domain is as follows; The application takes in a “dataset” that consists of numerous text files containing related data An individual text file within the dataset usually contains approx 20 “headers” that contain metadata about the data it contains. It also contains a large tab delimited section containing data that is related to data in one of the other text files contained within the dataset. The number of columns per file is very variable from 2 to 256+ columns. The original application was written to allow users to load a dataset, map certain columns of each of the files which basically indicating key information on the files to show how they are related as well as identify a few expected column names. Once this is done, a validation process takes place to enforce various rules and ensure that all the relationships between the files are valid. Once that is done, the data is imported into a SQL Server database. The database design is an EAV (Entity-Attribute-Value) model used to cater for the variable columns per file. I know EAV has its detractors, but in this case, I feel it was a reasonable choice given the disparate data and variable number of columns submitted in each dataset. The memory problem Given the fact the combined size of all text files was at most about 5 megs, and in an effort to reduce the database transaction time, it was decided to read ALL the data from files into memory and then perform the following; perform all the validation whilst the data was in memory relate it using an object model Start DB transaction and write the key columns row by row, noting the Id of the written row (all tables in the database utilise identity columns), then the Id of the newly written row is applied to all related data Once all related data had been updated with the key information to which it relates, these records are written using SqlBulkCopy. Due to our EAV model, we essentially have; x columns by y rows to write, where x can by 256+ and rows are often into the tens of thousands. Once all the data is written without error (can take several minutes for large datasets), Commit the transaction. The problem now comes from the fact we are now receiving individual files containing over 30 megs of data. In a dataset, we can receive any number of files. We’ve started seen datasets of around 100 megs coming in and I expect it is only going to get bigger from here on in. With files of this size, data can’t even be read into memory without the app falling over, let alone be validated and imported. I anticipate having to modify large chunks of the code to allow validation to occur by parsing files line by line and am not exactly decided on how to handle the import and transactions. Potential improvements I’ve wondered about using GUIDs to relate the data rather than relying on identity fields. This would allow data to be related prior to writing to the database. This would certainly increase the storage required though. Especially in an EAV design. Would you think this is a reasonable thing to try, or do I simply persist with identity fields (natural keys can’t be trusted to be unique across all submitters). Use of staging tables to get data into the database and only performing the transaction to copy data from staging area to actual destination tables. Questions For systems like this that import large quantities of data, how to you go about keeping transactions small. I’ve kept them as small as possible in the current design, but they are still active for several minutes and write hundreds of thousands of records in one transaction. Is there a better solution? The tab delimited data section is read into a DataTable to be viewed in a grid. I don’t need the full functionality of a DataTable, so I suspect it is overkill. Is there anyway to turn off various features of DataTables to make them more lightweight? Are there any other obvious things you would do in this situation to minimise the memory footprint of the application described above? Thanks for your kind attention.

  Read the article

• ASP.NET WebAPI Security 4: Examples for various Authentication Scenarios

  - by Your DisplayName here!

  The Thinktecture.IdentityModel.Http repository includes a number of samples for the various authentication scenarios. All the clients follow a basic pattern: Acquire client credential (a single token, multiple tokens, username/password). Call Service. The service simply enumerates the claims it finds on the request and returns them to the client. I won’t show that part of the code, but rather focus on the step 1 and 2. Basic Authentication This is the most basic (pun inteneded) scenario. My library contains a class that can create the Basic Authentication header value. Simply set username and password and you are good to go. var client = new HttpClient { BaseAddress = _baseAddress }; client.DefaultRequestHeaders.Authorization = new BasicAuthenticationHeaderValue("alice", "alice"); var response = client.GetAsync("identity").Result; response.EnsureSuccessStatusCode();   SAML Authentication To integrate a Web API with an existing enterprise identity provider like ADFS, you can use SAML tokens. This is certainly not the most efficient way of calling a “lightweight service” ;) But very useful if that’s what it takes to get the job done. private static string GetIdentityToken() {     var factory = new WSTrustChannelFactory(         new WindowsWSTrustBinding(SecurityMode.Transport),         _idpEndpoint);     factory.TrustVersion = TrustVersion.WSTrust13;     var rst = new RequestSecurityToken     {         RequestType = RequestTypes.Issue,         KeyType = KeyTypes.Bearer,         AppliesTo = new EndpointAddress(Constants.Realm)     };     var token = factory.CreateChannel().Issue(rst) as GenericXmlSecurityToken;     return token.TokenXml.OuterXml; } private static Identity CallService(string saml) {     var client = new HttpClient { BaseAddress = _baseAddress };     client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("SAML", saml);     var response = client.GetAsync("identity").Result;     response.EnsureSuccessStatusCode();     return response.Content.ReadAsAsync<Identity>().Result; }   SAML to SWT conversion using the Azure Access Control Service Another possible options for integrating SAML based identity providers is to use an intermediary service that allows converting the SAML token to the more compact SWT (Simple Web Token) format. This way you only need to roundtrip the SAML once and can use the SWT afterwards. The code for the conversion uses the ACS OAuth2 endpoint. The OAuth2Client class is part of my library. private static string GetServiceTokenOAuth2(string samlToken) {     var client = new OAuth2Client(_acsOAuth2Endpoint);     return client.RequestAccessTokenAssertion(         samlToken,         SecurityTokenTypes.Saml2TokenProfile11,         Constants.Realm).AccessToken; }   SWT Authentication When you have an identity provider that directly supports a (simple) web token, you can acquire the token directly without the conversion step. Thinktecture.IdentityServer e.g. supports the OAuth2 resource owner credential profile to issue SWT tokens. private static string GetIdentityToken() {     var client = new OAuth2Client(_oauth2Address);     var response = client.RequestAccessTokenUserName("bob", "abc!123", Constants.Realm);     return response.AccessToken; } private static Identity CallService(string swt) {     var client = new HttpClient { BaseAddress = _baseAddress };     client.DefaultRequestHeaders.Authorization = new AuthenticationHeaderValue("Bearer", swt);     var response = client.GetAsync("identity").Result;     response.EnsureSuccessStatusCode();     return response.Content.ReadAsAsync<Identity>().Result; }   So you can see that it’s pretty straightforward to implement various authentication scenarios using WebAPI and my authentication library. Stay tuned for more client samples!

  Read the article

< Previous Page | 423 424 425 426 427 428 429 430 431 432 433 434  | Next Page >