Search Results

Search found 66801 results on 2673 pages for 'near real time'.

Page 428/2673 | < Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >

  • CDN vs own apache servers?

    - by ajsie
    i know that CDN is just for static contents. but then i still have to spread out by apache servers to all corners of the world right? so when i have done it, why dont i just set up some dedicated apache servers only serving static content just like CDN? are there real benefits from still using CDN compared to that scenario?

    Read the article

  • Bad temperature sensors on Foxconn motherboard?

    - by Gawain
    I have a system with a Foxconn V400 series motherboard and AMD Athlon 3000+ processor. Ever since I got it a few years ago the fans (particularly the CPU fan) have been really loud. So recently I installed SpeedFan to see why they were running so fast. SpeedFan reported the CPU temperature to be 32C, and one motherboard sensor at about 26C. But the other two motherboard sensors were reporting 78C and 64C respectively. Naturally the fans were both maxed out because of this, with the CPU fan at 5800rpm and the case fan at 2400rpm. I opened the case and everything inside was literally cool to the touch, with the exception of the CPU heatsink which was slightly warm, but nowhere near 78C. It seems like the temperature sensors are either defective or being read incorrectly. Is there some way I can decrease my fan noise without risking damage to my processor? Some way to ignore those two temp sensors? Any help would be greatly appreciated.

    Read the article

  • What is your IT-department to staff ratio?

    - by Bart Silverstrim
    This is a topic that may be rather political but it related to system administration still...how many people do you have supporting your users in your IT department? We have three people supporting something near 1500 systems and around 2400 people and a recent question was raised about why we have long times to get systems replaced, repaired, work orders fulfilled, etc. along with the system admin duties of maintaining the servers (mail, proxy, filters, VOIP, wireless, backup, etc.) Does anyone have numbers on what the "best practices" average is of support people to employees in an organization? EDIT:...from some of the answers that are appearing I'm starting to feel depressed...

    Read the article

  • How do you explain what the BIOS is to non-Super User?

    - by David Johnstone
    In a particularly nerdy Facebook status update I mentioned that I had flashed my BIOS. One of my friends asked what the BIOS is. My question is: How do you explain what the BIOS is and does to a layperson? (Hint: "The BIOS is the basic input/output system" is not going to be accepted as the answer.) (Of course, the real question is "does she like me?", but I'm not sure there's a site for this :-p )

    Read the article

  • New IP address with TSOCKS

    - by Matthew Downey
    I am using tsocks on my Ubuntu machine and I have it all set up so that if I run wget -q -O - checkip.dyndns.org|sed -e 's/.*Current IP Address: //' -e 's/<.*$//' in my normal shell I get my real IP address, and if I run tsocks wget -q -O - checkip.dyndns.org|sed -e 's/.*Current IP Address: //' -e 's/<.*$//' I get another IP address like I should. My question is how do I make the tsocks command return with a different 'different address'; in other words establish a new identity.

    Read the article

  • FAT32: setting a mixed-case volume label on Windows?

    - by BoltClock
    When I try to set the volume label for my FAT32 USB drive the normal way (using Windows Explorer or Disk Management), the filesystem just makes the label uppercase when applying it. Is it possible at all to set a mixed-case volume label on the drive on Windows? I know there may be no real reason for me to do that, but I'd really like to know.

    Read the article

  • Dovecot Virtual Users Not Authenticating

    - by blankabout
    We have a standard Postfix/Dovecot installation working perfectly with real users but cannot work out how to add virtual users, all virtual user login attempts fail with authentication errors. Following are snippets from the configuration files: /etc/postfix/main.cf: virtual_mailbox_domains = virtualexample.com virtual_mailbox_base = /var/spool/vhosts virtual_mailbox_recipients = hash:/etc/postfix/virtual_mailbox_recipients /etc/dovecot/dovecot.conf: !include conf.d/*.conf /etc/dovecot/conf.d/10-auth.conf auth_mechanisms = cram-md5 digest-md5 plain passdb { driver = passwd-file # Path for passwd-file. Also set the default password scheme. args = scheme=cram-md5 /etc/cram-md5.pwd } /etc/cram-md5.pwd [email protected]{MD5}$1$uIMvzy92$9Xt67B/qw4u6txkkxzne80 This is a snippet from the log when a login attempt is made: auth: Debug: Loading modules from directory: /usr/lib64/dovecot/auth auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libauthdb_ldap.so auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libdriver_sqlite.so auth: Debug: Module loaded: /usr/lib64/dovecot/auth/libmech_gssapi.so auth: Debug: passwd-file /etc/cram-md5.pwd: Read 1 users auth: Debug: auth client connected (pid=21990) auth: Debug: client in: AUTH#0111#011CRAM-MD5#011service=imap#011lip=1.1.1.1#011rip=2.2.2.2#011lport=143#011rport=51774 auth: Debug: client out: CONT#0111#011PDI1Njc0NjQ1NzQ3MTY0NTkuMTM0MTIxNzkwN0BncDM+ auth: Debug: client in: CONT auth: Debug: passwd-file([email protected],2.2.2.2): lookup: [email protected] file=/etc/cram-md5.pwd auth: Debug: client out: OK#0111#[email protected] auth: Debug: master in: REQUEST#0111630404609#01121990#0111#011b66b5f46b520a08e1d19d3d249be7073 auth: Debug: passwd([email protected],2.2.2.2): lookup auth: passwd([email protected],2.2.2.2): unknown user auth: Error: userdb([email protected],2.2.2.2): user not found from userdb passwd auth: Debug: master out: NOTFOUND#0111630404609 imap: Error: Authenticated user not found from userdb, auth lookup id=1630404609 (client-pid=21990 client-id=1) imap-login: Internal login failure (pid=21990 id=1) (auth failed, 1 attempts): user=, method=CRAM-MD5, rip=2.2.2.2, lip=1.1.1.1, mpid=21993 auth: Debug: auth client connected (pid=22010) auth: Debug: client in: AUTH#0111#011CRAM-MD5#011service=imap#011lip=1.1.1.1#011rip=2.2.2.2#011lport=143#011rport=51775 auth: Debug: client out: CONT#0111#011PDcxMDkwNDY1NTQzODUzMDkuMTM0MTIxNzkyOEBncDM+ auth: Debug: client in: CONT auth: Debug: passwd-file([email protected],2.2.2.2): lookup: [email protected] file=/etc/cram-md5.pwd auth: Debug: client out: OK#0111#[email protected] auth: Debug: master in: REQUEST#011343539713#01122010#0111#011e47b1345784e2845d59e794afa9a6bbe auth: Debug: passwd([email protected],2.2.2.2): lookup auth: passwd([email protected],2.2.2.2): unknown user auth: Error: userdb([email protected],2.2.2.2): user not found from userdb passwd auth: Debug: master out: NOTFOUND#011343539713 imap: Error: Authenticated user not found from userdb, auth lookup id=343539713 (client-pid=22010 client-id=1) imap-login: Internal login failure (pid=22010 id=1) (auth failed, 1 attempts): user=, method=CRAM-MD5, rip=2.2.2.2, lip=1.1.1.1, mpid=22011 It would appear that the user lookup is not working, even tho' the log suggests that Dovecot is using the /etc/cram-md5.pwd file and the user is configured in that same file. There are of course dozens of examples of using virtual users with Dovecot, but all the ones we have found either refer to Dovecot 1.x (we are using 2.x), using only virtual users (we must use real AND virtual users) or want to use a MySQL db, we need to use a text file. Some hints about where we are going wrong would be very much appreciated.

    Read the article

  • Slow draw on some apps and dynamic clocks not working properly with ATI/AMD proprietary drivers

    - by Rakeka
    I've recently purchased a new computer (around July 2010) and I've been having some problems with proprietary video drivers on Linux. The hardware is: Video: ATI/AMD Radeon HD 5870 (XFX HD-587X-ZNFC); Motherboard: Asus P7P55D-E Deluxe; Processor: Intel i5 750; Memory: Kingston Hyperx KHX1600C8D3K2/4GX (2x - 8GB Total); Power Supply: XFX P1-750B-CAG9; There are no overclocks, not even the memories (they are at 1333mhz due processor memory controller limitation). The operational system is a homebrew Linux distribution with the following software: Architecture: x86_64 (multilib) Kernel: 2.6.35.10 Xorg: 7.5 Window Manager: wmii-3.9.2 Video Driver: ATI/AMD Catalyst 10.12 There are no desktop effects programs like compiz fusion or beryl. The problems: With ATI/AMD proprietary driver, some applications are with slow draw/redraw, and, the same applications make the driver to increase the card clocks to maximum (0% gpu activity, only the clocks are increased). I dunno exactly how to describe the slow draw but I'll list some applications and symptoms. xterm Flickers a lot when drawing continuous output; When I'm in a workspace with fullscreen xterm, The gpu load stays at 12% in idle, and, with smaller xterm, smaller GPU load. "aticonfig --odgc" output: Default Adapter - ATI Radeon HD 5800 Series Core (MHz) Memory (MHz) Current Clocks : 157 300 Current Peak : 850 1200 Configurable Peak Range : [600-900] [900-1300] GPU load : 12% "aticonfig --pplib-cmd 'get activity'" output: Current Activity is Core Clock: 157MHZ Memory Clock: 300MHZ VDDC: 950 Activity: 12 percent Performance Level: 0 Bus Speed: 5000 Bus Lanes: 16 Maximum Bus Lanes: 16 More examples: mplayer time info flickers on terminal; "find /" flickers a lot (It takes some time to stop with control-c. But, If I change the workspace or put some window upon it, just after the control-c, it stops instantly); "cat somefile" if the file is big (Xorg.0.log for example) it takes some time to display; vim and less (ex: find / | less) don't have much problems, just a little flicker when scrolling; mplayer (no gui) Slow reproduction and seek with -vo x11; Tearing with -vo xv; Time info flickers on terminal (xterm consequence); gvim A little slow draw when scrolling with page up/page down; Firefox Slow draw/redraw on some pages like www.boadica.com.br and sometimes on www.youtube.com with flash enable (never noticed on many pages); Corruptions when informative yellow boxes are showing and scroll the page (an gray box appears at the same place of the informative box); "Wallpaper" After minimizing a fullscreen window or changing to an empty workspace it takes some time to redraw wallpaper. "Video Card" The core and memory clocks are increased with the events described above and on other situations like change workspace (even without wallpaper), minimize, maximize or move a window; Idle clocks: Core: 157mhz, Memory: 300mhz Full clocks: Core: 850mhz, Memory: 1200mhz xpdf Painful slow scrolling; display (from ImageMagick) Slow menus and sometimes slow image redraw; Programs that I use and are apparently without problems: gimp; pidgin; mplayer (-vo gl, gl2); blender; unigine heaven (better fps than on Windows); doom3; tibia; penumbra overture; amnesia the dark descent (wine); diablo 2 (wine); No problems on Windows (Windows 7 Ultimate 64bit). And special note to this: Full desktop effects from Debian and Ubuntu gnome appearance cpanel don't cause ANY problems, even the core and memory clocks don't increase when change workspace, minimize, maximize or move a window. What I've tested: Unsuccessful tests: Tested all drivers versions since 10.6 (released approximately when I've installed the first slackware in this PC); Tested other video card - ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Tested some options on xorg.conf and that I've found googling (some of these options are commented on my xorg.conf. I'll send the links at the end of post); Tested some patches like 107_fedora_dont_fill_bg_none.patch and xserver-xorg-backclear.patch from Arch Linux Catalyst page (https://wiki.archlinux.org/index.php/ATI_Catalyst); Tested other distros and software versions: Tested XORG-7.6 on my own distribution; Tested Debian Squeeze (testing - from 2010-12-20); Tested Ubuntu Marverick (10.10); Tested Slackware 13.1; Distros info: Architecture: i386 Debian and Ubuntu with all default software (kernel, gnome, xorg, drivers); Slackware with Catalyst from AMD page and default window managers like: fvwm, xfce, and my own build of wmii; Successful tests: Tested other video card (only on my homebrew distro) - NVIDIA Geforce 7300GS with driver 260.19.29; That didn't shown the slow draw problems, but that card is a bit obsolete, so, dunno if that lacks features like the dynamic clocks. I don't dispose of other video cards like nvidia g/gt/gts/gtx 200~400~500 or Radeon HD 3000/4000/6000 to make more tests. Tested other hardware: Video: ATI/AMD Radeon HD 5570 (XFX HD-557X-ZHF2); Motherboard: Intel DG31PR; Processor: Core 2 Duo E6750; Software for that hardware: Fresh install of same distros (except for the mine) with same program versions; That video card (HD 5570) were full time at the maximum clocks (something like 500/750, don't remember) in all the operational systems (Windows XP and Windows 7 too), but it didn't shown the same problems that I have here. I've googled a lot about common problems with ATI/AMD proprietary drivers for Linux and didn't find similar problems, except by the Firefox corruptions, that the solutions were to disable ATI Direct2DAccel and use XAA. With XAA the problems persists and the other applications like pidgin and rest of Firefox showed the same problems of slow draw/redraw. Open source Drivers: With open source drivers (xf86-video-ati-6.13.2) I hadn't the same slow draw problems, but, had other problems, that, for now, make it no viable solution. I'll not discuss it here because this is another line of problems and will confuse everything. If it happens to be the only solution, I'll make another thread to discuss it. Logs and Configs: kernel .config dmesg xorg package list xorg.conf Xorg.0.log

    Read the article

  • which server is best for me??

    - by mathew
    I am looking for a best hosting service for my website. My website is a PHP MySQl driven site which hase got site scrapping for more than 10 websites and near about 8-10 API pursing and some about 150 mb dat file reading(from local hard drive), and also one rss pursing,Live graph from other sites, geo map from Google,Map api from Google and so on. one widget which real-time result for any one who chose the same. so my question is which is best option for me. actually I am considering softlayer cloud as they are pretty cheap and more facilities than rackspace. another option is a dedicated server which has 2 single core processor, 4GB ram and 250GB sata II. with 100 mbps uplink. so please tell me which will be the best option?? I heard that dedicated server has lots of limitations than cloud. but for cloud they uses SAN for storage so I am afraid the reading proces for database may be bit slower...and their basic plan ram is only 1 GB.

    Read the article

  • Can I resize the screen resolution of a remote desktop session?

    - by At Nel
    Is it possible to change the screen resolution of a Windows remote desktop session after I'm already logged on? For example: it's set for fullscreen but afterwards I want to make the window smaller but now it's Windowed with scrollbars etc. making it a real pain. Basically what I'm hoping for is like when you resize a VMWare session, the guest OS can resize the resolution and everything works beautifully.

    Read the article

  • Import into Aperture 3 without moving files

    - by delwin
    I like managing my own files, and this is definitely possible with Aperture 3. But there seems to be two ways to import into Aperture: either by dragging and dropping, or importing one folder at a time, manually, through the Aperture import window. BUT whenever I drag and drop the photos, it imports them into the Aperture library, making duplicates of everything. And if I add them manually through Aperture, I have to add each folder at a time, which is extremely tedious. Is there any solution?

    Read the article

  • Improving server security [closed]

    - by Vicenç Gascó
    I've been developing webapps for a while ... and I always had a sysadmin which made the environment perfect to run my apps with no worries. But now I am starting a project on myself, and I need to set up a server, knowing near to nothing about it. All I need to do is just have a Linux, with a webserver (I usually used Apache), PHP and MySQL. I'll also need SSH, SSL to run https:// and FTP to transfer files. I know how to install almost everything (need advice about SSL) with Ubuntu Server, but I am concerned about the security topic ... say: firewall, open/closed ports, php security, etc ... Where can I found a good guide covering this topics? Everything else in the server... I don't need it, and I wanna know how to remove it, to avoid resources consumption. Final note: I'll be running the webapp at amazon-ec2 or rackspace cloud servers. Thanks in advance!!

    Read the article

  • NOTEPAD replacement for POETRY

    - by DINGUZ
    NEEDS TO; -associateable with .TXT -justified text center (for poetry) -REAL total fullscreen -*open quicker than SIMILAR TO; Jdarkroom, Q10, WriteMonkey none of the above start fast enough on my NETBOOK atom processor, any alternatives would be appreciated, though I feel I have expired my google-foo.

    Read the article

  • Laptop burned after heavy OpenGL usage. Is there hope?

    - by leladax
    After programming for OpenGL and a 'slow OS' case for a couple of minutes the screen went blank. I shut it down with forcing it with the shutdown key and now there's no led at all with battery or AC, it doesn't start at all, it's totally dead. It's most certainly not the AC adapter since that didn't show at first, it doesn't start a led at all and if the AC is connected it does a very slight and faint clicking noise (one has to have his ear next to it to hear it, near the AC connector). Is there any hope? I suppose it's a burned motherboard. I suspected a burned GPU but that would still leave the leds at least lid or at least attempting to start up. Now it's totally dead. It's a TOSHIBA satellite x200-219. It has no warranty, as it's more than 2 years since purchase.

    Read the article

  • Get source and destination of outbound traffic in pfSense

    - by maxsilver
    I'm looking at the traffic graph in pfSense (Version 1.2.2), which we're using as a router / NAT / ect on our network. Recently, I'm seeing a sudden, constant spike of 15 - 30kbps traffic outbound, that is unusual for our network (normally its below 2kbps, we're mostly all inbound traffic) Is there any way to determine what the source of this traffic is, or where it's going? (Just an internal IP address for source, and external IP address for destination would be all I need) I've already tried switching the traffic graph to 'LAN' and watching the host list on the right side, but it seems ... flakey. The numbers it shows seem to fade in and out at random, and the values never add up to anywhere near the graph values. I'm not allowed to post the image, but a photo is available at - http://imgur.com/QYjKI.png

    Read the article

  • Experiences with Autonomy IDOL

    - by Joe Doyle
    We're currently looking at implementing Autonomy IDOL in our environment. Does anyone have any recommendations or gotchas that we should be aware of? Are other companies using IDOL successfully? I'm curious to get some real-world impressions beyond the case studies we've been provided with.

    Read the article

  • How do I extend the virsh/qemu/libvirt Timeout?

    - by Nick
    There's a known issue with starting virtual machines with large hard drive images. Apparently, the time-out is 3 seconds, but in reality, it can take up to 15 seconds for a machine to start. I've read several bug reports, and people confirming it's a time-out problem, but I have yet to see a solution. Is there an option I can pass, like: virsh start MyMachine --ignore-timeout Or a config file that needs changed? Thanks!

    Read the article

  • How passively monitor for tcp packet loss? (Linux)

    - by nonot1
    How can I passively monitor the packet loss on TCP connections to/from my machine? Basically, I'd like a tool that sits in the background and watches TCP ack/nak/re-transmits to generate a report on which peer IP addresses "seem" to be experiencing heavy loss. Most questions like this that I find of SF suggest using tools like iperf. But, I need to monitor connections to/from a real application on my machine. Is this data just sitting there in the Linux TCP stack?

    Read the article

  • Beeping Hard Disk - Seagate 250GB Momentus 5400.6

    - by Pez Cuckow
    I have been trying to repair a laptop that simply beeps instead of booting. After taking it apart I have now realised that it is the hard disk beeping. I know that sound strange but I guarantee that is what it is! (Currently powered on it's own with a Sata Mains lead). The beeping is slightly faster than one per second there is a link to a recording below: http://www.pezcuckow.com/files/BeepingHardDisk.m4a This recording was made resting the mic on the hard disk while it was sat on a table on it's own, there are no speakers anywhere near, the sound is coming from the hard disk. Does anyone know what this beep means? Is the hard drive just dead, or is it fixable and the data recoverable? Many thanks,

    Read the article

  • Is there a way to apply a GPO to all but selective users? (SBS 2008)

    - by CandyCo
    I've created a GPO in SBS 2008 that deploys and updates software. Unfortunately, one of our VPN users lives out in the sticks and has severe latency, so the start up processes and updates time out and take an awfully long time, if they ever complete at all. I'd like to apply this GPO to all auth'd users except for him, without having to create a new custom user group. Any thoughts?

    Read the article

  • faking NAT with a VMware distributed switch across multiple hosts

    - by romant
    Have a VM that will act as the router, and will be connected to both networks (NAT + 'real'). I spread the distributed switch across the hosts, although any VM that is not on the same physical host as the router/dhcpd simply doesn't get an IP. So its obviously my dvSwitch config. Has anyone achieved a NAT solution using a dvSwitch before that they could share?! Thanks.

    Read the article

  • how to disable all system sounds - permanently

    - by studiohack
    I prefer the sound scheme of Windows 7 HP to be set to "No Sounds" ALL the time. The problem is, when I switch themes, the themes switch sound schemes also. I know I can go in and disable/change to "No Sounds" every time by hand, but is there a way to turn it off and keep it off, regardless of the theme? Thanks!

    Read the article

< Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >