Search Results

Search found 41071 results on 1643 pages for 'post update'.

Page 428/1643 | < Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >

  • Is it normal for GRUB to take some time (15+s) after I choose what to boot?

    - by zarnaik
    I had been planning to change the background of my bootloader for a while, and finally got to it. Now the black screen I get for quite some time was made clear. It is still GRUB, because the background image stays, while all of the text is gone. Then it just simply shows the Lubuntu loading screen for, usually, not more than 3 seconds. I run Lubuntu 12.10. My question is, is this normal behaviour or is something going wrong, causing GRUB to take longer? Here are the contents of my grub file located at /etc/default/ : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=5 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" GRUB_BACKGROUND="/usr/share/lubuntu/wallpapers/1210-Windmill_by_Ferran_Reyes.png" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" If you need any other information please tell me and I'll do my best to provide it. :)

    Read the article

  • How do I open 2 instances of the same file in notepad++ side by side with their own scrollbars in a single Notepad++ window?

    - by Qlidnaque
    I remember doing this a long time ago and have forgotten how I had done it. I like to do this when I have long html or php files to edit and I need part of the code from further down the file in a place nearer to the top, or when I want to compare different parts of the same file. There was a way to do this without opening two instances of Notepad++ and when I clicked on save, it made the saved changes in both instances of the opened file (whereas if I have 2 windows of Notepad++ opened simultaneously, it will prompt me to either update or not update the second opened instance if the first one was saved midway.)

    Read the article

  • Computer won't stay powered up

    - by Android
    I have just tried to turn my PC on this morning and it won't stay powered up. It will come on as normal for about 5 seconds, not quite long enough for the monitor to wake up. Then it will power off. After about 2 seconds it will start again, it will continue like this until I pull out the plug. Plugging it in again doesn't restart the cycle although pressing the power button does. I have tried to clear the cmos but beyond that I have no ideas. It was working perfectly when I put it in hibernate last night. NOTE: I am using a Dell Optiplex 755 UPDATE 1: I took out the motherboard battery and it almost came on then it displays the message Error loading Operating System UPDATE 2: After taking out the custom video card, it says "No hard drive present"

    Read the article

  • Upgraded from ubuntu 12.04 to 12.10 issues

    - by ubuntu novice user
    I recently upgraded 12.04 to 12.10 ubuntu and then all hell broke loose. Being more specific, I have a Compaq machine and its hard disk is partitioned into 3 parts, so when I installed Ubuntu 10.04, I installed it in windows, since then have upgraded with each new ubuntu release via the update manager without any problems. I have installed the 64 bit versions. 12.10 downloaded via update manager, and initial downloading of packages was without problems, however, as it tried to install the packages, error messages appeared. The first was one about missing lib files, but I clicked to continue, since I am a relative novice on ubuntu. It continued, and during the restart process, when it was powering down, the computer hanged on the shutting down bit without rebooting for more than half an hour, so I manually shut down the machine and restarted it. Then a new error message appeared stating could not find disk, and I hit the manual fix option, and it now boots to an empty ubuntu desktop with my wallpaper but no launcher and the graphics appears as if this was put on a 640 x 480 resolution, and the screen no longer fits onto my 19" LCD. I had to use Ctrl-Alt-T to log out and then restart from there. How can I resolve this issue. Please help!

    Read the article

  • Fusion Middleware 11gR1 : 2012?4??????

    - by Hiro
    2012 ?4? (2012/04/17 ??)?Fusion Middleware 11gR1 ?????????????? ? ????????????4??????? 1. Oracle JDK??????Oracle JDK???????Oracle JRE/JDK 6 Update 31, Oracle JRE/JDK 7 Update 3 ??????? ???????????????Linux x86, Linux x86-64, Solaris (SPARC), Solaris x86-64, Windows (32-bit), Windows x64 ?????? 2. Oracle JRockit??????Oracle JRockit???????Oracle JRockit R28.2.2 ??????? ???????????????Linux x86, Linux x86-64, Solaris (SPARC), Windows (32-bit), Windows x64 ?????? 3. Oracle GlassFish ServerOracle GlassFish Server 3.1.2 ??????? ? ??????????????AIX, Linux x86, Linux x86-64, Solaris (SPARC), Solaris x86-64, Windows (32-bit), Windows x64, Other Platforms ?????? 4. Oracle Fusion Middleware 11.1.1.6.0?11.1.1.6.0?(Oracle WebLogic Server 10.3.6 ?????)?????????????????????AIX, Linux x86, Linux x86-64, Solaris (SPARC), Solaris x86-64, Windows (32-bit), Windows x64, Other Platforms ?????? ???????????????????????????????? Oracle Business Process Analysis Suite 11g (11.1.1.4.0) Oracle Directory Server Enterprise Edition 11g (11.1.1.5.0) Oracle Identity and Access Management 11g (11.1.1.5.0) OAM, OAAM, OIM ?? Oracle Identity Analytics 11g (11.1.1.5.0) Oracle Unified Directory 11g (11.1.1.5.0) Oracle Tuxedo 11g (11.1.1.2.0) or 11g (11.1.1.3.0) ?????Sun, ?FatWire??????? ???????????????11.1.1.6.0???????????????????????Oracle Fusion Middleware ?????????????????ReadMe 11g Release 1 (11.1.1.6.0)????????????Fixed Bug List????????????Note#1364511.1 ?????????? (Note????????????????????) ? ??????????????

    Read the article

  • WebLogic Server?????????????·??·???????????????????????????????

    - by ???02
    WebLogic Server?????????????·??·???????????????????????????????WebLogic Server??????????????????·??·???????????????????????????????????????????????¦?????!? WebLogic Server??????????~ WebLogic Server??? ??????????????????!! ~¦???????????????????? ?????? ??????¦ WebLogic Server 10.3.5 ¦ Database 11g????????¦ Oracle WebLogic Server - ??   - WebLogic Server???  - WebLogic Server 10gR3 ?????Update  - ????????????????????????WebLogic Server?????  - WebLogic Server 11gR1 Update  - ?????????/Oracle????????  - ???¦ WebLogic Server - ???????   - ????/???????????????/?????/????????/JRF????/?????????????/???????/JDBC/RAC????¦ WebLogic Server - JDBC??????  - WebLogic Server?JDBC????????????????(?????????11gR1(10.3.3))  - ????:JDBC????????/??/??/????/??·????/??????  - ??????????GridLink for RAC????????????????¦ WebLogic Server - GridLink for RAC  - GridLink???·???? Oracle RAC?????????????????????????·???????·??????¦ WebLogic Server - Enterprise Grid Messaging  - Enterprise Grid Messaging???Oracle WebLogic Server??????????????????????Java Messaging Service (JMS)???????  - Oracle Advanced Queuing???Oracle RAC???????????Oracle????????????????¦ WebLogic Server - Web????  - Web??????/????/??  - WebLogic Server 10.3.x?Web???????  - JAX-WS Stack ???/JAX-RPC Stack ???  - JAX-WS??/JAX-WS?JAX-PRC???  - JAX-WS???WebLogic Web ?????????¦ WebLogic Server - ?????????????  - Java EE??/Java EE????????/Java EE????/WebLogic Server/JVM??????????·???????¦ WebLogic Server - ????????/????  -  ????????:??????????????????????????????????????/?????????????????/?????????EJB??????????????  - ???????·?????????????????????/HTTP????????/??????????????/???????????????

    Read the article

  • git | error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied [SOLVED]

    - by Corbin Tarrant
    I am having a strange issue that I can't seem to resolve. Here is what happend: I had some log files in a github repository that I didn't want there. I found this script that removes files completely from git history like so: #!/bin/bash set -o errexit # Author: David Underhill # Script to permanently delete files/folders from your git repository. To use # it, cd to your repository's root and then run the script with a list of paths # you want to delete, e.g., git-delete-history path1 path2 if [ $# -eq 0 ]; then exit 0are still fi # make sure we're at the root of git repo if [ ! -d .git ]; then echo "Error: must run this script from the root of a git repository" exit 1 fi # remove all paths passed as arguments from the history of the repo files=$@ git filter-branch --index-filter "git rm -rf --cached --ignore-unmatch $files" HEAD # remove the temporary history git-filter-branch otherwise leaves behind for a long time rm -rf .git/refs/original/ && git reflog expire --all && git gc --aggressive --prune I, of course, made a backup first and then tried it. It seemed to work fine. I then did a git push -f and was greeted with the following messages: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything seems to have pushed fine though, because the files seem to be gone from the GitHub repository, if I try and push again I get the same thing: error: Unable to append to .git/logs/refs/remotes/origin/master: Permission denied error: Cannot update the ref 'refs/remotes/origin/master'. Everything up-to-date EDIT $ sudo chgrp {user} .git/logs/refs/remotes/origin/master $ sudo chown {user} .git/logs/refs/remotes/origin/master $ git push Everything up-to-date Thanks! EDIT Uh Oh. Problem. I've been working on this project all night and just went to commit my changes: error: Unable to append to .git/logs/refs/heads/master: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/refs/heads/master sudo chgrp {user} .git/logs/refs/heads/master I try the commit again and I get: error: Unable to append to .git/logs/HEAD: Permission denied fatal: cannot update HEAD ref So I: sudo chown {user} .git/logs/HEAD sudo chgrp {user} .git/logs/HEAD And then I try the commit again: 16 files changed, 499 insertions(+), 284 deletions(-) create mode 100644 logs/DBerrors.xsl delete mode 100644 logs/emptyPHPerrors.php create mode 100644 logs/trimXMLerrors.php rewrite public/codeCore/Classes/php/DatabaseConnection.php (77%) create mode 100644 public/codeSite/php/init.php $ git push Counting objects: 49, done. Delta compression using up to 2 threads. Compressing objects: 100% (27/27), done. Writing objects: 100% (27/27), 7.72 KiB, done. Total 27 (delta 15), reused 0 (delta 0) To [email protected]:IAmCorbin/MooKit.git 59da24e..68b6397 master -> master Hooray. I jump on http://GitHub.com and check out the repository, and my latest commit is no where to be found. ::scratch head:: So I push again: Everything up-to-date Umm...it doesn't look like it. I've never had this issue before, could this be a problem with github? or did I mess something up with my git project? EDIT Nevermind, I did a simple: git push origin master and it pushed fine.

    Read the article

  • Comments show up in database, but only show up on my index page after a refresh.

    - by Truong
    Hi, I have AJAX, PHP, jquery, and mySQL in this very simple website I'm trying to make. All there is is a text area that sends data to the database and uses ajax\jquery to display that data onto the index page. For some reason though, I press submit and the data goes to the database, but I have to refresh the page myself to see that data on the page. I'm assuming that the problem has to do with my AJAX JQuery or even some mistake in the index. Also, when I type the text into the text area and press submit, the text remains in the textarea until I refresh the page. Haha, sorry if this is such a noob question.. I'm trying to learn. Thanks so much Here is the AJAX: <script type="text/javascript" src="http://ajax.googleapis.com/ajax/libs/jquery/1.3.0/jquery.min.js"></script> <script type="text/javascript"> $(function() { $(".submit").click(function() { var comment = $("#comment").val(); var post_id = $("#post").val(); var dataString = '&comment=' + comment if(comment=='') { alert('Fill something in please!'); } else { $("#flash").show(); $("#flash").fadeIn(400).html('<img src="noworries.jpg" /> '); $.ajax({ type: "POST", url: "commentajax.php", data: dataString, cache: false, success: function(html){ $("ol#update").append(html); $("ol#update li:last").fadeIn("slow"); $("#flash").hide(); } }); }return false; }); }); </script> Here is the index\form area: <body> <div id="container"><img src="banner.jpg" width="890" height="150" alt="title" /></div> <id="update" class="timeline"> <div id="flash"></div> <div id="container"> <form action="#" method="post"> <textarea name="comment" id="comment" cols="35" rows="4"></textarea><br /> <input name="submit" type="submit" class="submit" id="submit" value=" Submit Comment " /><br /> </form> </div> <id="update" class="timeline"> <?php include('config.php'); //$post_id value comes from the POSTS table $prefix="I'm happy when"; $sql=mysql_query("select * from comments order by com_id desc"); while($row=mysql_fetch_array($sql)) { $comment=$row['com_dis']; ?> <!--Displaying comments--> <div id="container"> <class="box"> <?php echo "$prefix $comment"; ?> </div> <?php } ?> Here is my commentajax.php <?php include('config.php'); if($_POST) { $comment=$_POST['comment']; $comment=mysql_real_escape_string($comment); mysql_query("INSERT INTO comments(com_id,com_dis) VALUES ('NULL', '$comment')"); } ?> <li class="box"><br /> <?php echo $comment; ?> </li> I'm sorry for so much code but I just started learning this four days ago and this is probably one of the last bugs until the website is functional.

    Read the article

  • How do I use UIImagePickerController just to display the camera and not take a picture?

    - by Thomas
    Hello All: I'd like to know how to open the camera inside of a pre-defined frame (not the entire screen). When the view loads, I have a box, and inside it, I want to display what the camera sees. I don't want to snap a picture, just basically use the camera as a viewfinder. I have searched this site and have not yet found what I'm looking for. Please help. Thanks! Thomas Update 1: Here is what I have tried so far. 1.) I added UIImageView to my xib. 2.) Connect the following outlet to the UIImageView in IB IBOutlet UIImageView *cameraWindow; 3.) I put the following code in viewWillAppear -(void)viewWillAppear:(BOOL)animated { [super viewWillAppear:animated]; UIImagePickerController *picker = [[UIImagePickerController alloc] init]; picker.delegate = self; picker.sourceType = UIImagePickerControllerSourceTypeCamera; [self presentModalViewController:picker animated:YES]; NSLog(@"viewWillAppear ran"); } But this method does not run, as evident by the absence of NSLog statement from my console. Please help! Thanks, Thomas Update 2: OK I got it to run by putting the code in viewDidLoad but my camera still doesn't show up...any suggestions? Anyone....? I've been reading the UIImagePickerController class reference, but am kinda unsure how to make sense of it. I'm still learning iPhone, so it's a bit of a struggle. Please help! - (void)viewDidLoad { [super viewDidLoad]; // Create a bool variable "camera" and call isSourceTypeAvailable to see if camera exists on device BOOL camera = [UIImagePickerController isSourceTypeAvailable:UIImagePickerControllerSourceTypeCamera]; // If there is a camera, then display the world throught the viewfinder if(camera) { UIImagePickerController *picker = [[UIImagePickerController alloc] init]; // Since I'm not actually taking a picture, is a delegate function necessary? picker.delegate = self; picker.sourceType = UIImagePickerControllerSourceTypeCamera; [self presentModalViewController:picker animated:YES]; NSLog(@"Camera is available"); } // Otherwise, do nothing. else NSLog(@"No camera available"); } Thanks! Thomas Update 3: A-HA! Found this on the Apple Class Reference. Discussion The delegate receives notifications when the user picks an image or movie, or exits the picker interface. The delegate also decides when to dismiss the picker interface, so you must provide a delegate to use a picker. If this property is nil, the picker is dismissed immediately if you try to show it. Gonna play around with the delegate now. Then I'm going to read on wtf a delegate is. Backwards? Whatever :-p Update 4: The two delegate functions for the class are – imagePickerController:didFinishPickingMediaWithInfo: – imagePickerControllerDidCancel: and since I don't actually want to pick an image or give the user the option to cancel, I am just defining the methods. They should never run though....I think.

    Read the article

  • php script gets two ajax requests, only returns one?

    - by Dan.StackOverflow
    I'll start from the beginning. I'm building a wordpress plugin that does double duty, in that it can be inserted in to a post via a shortcode, or added as a sidebar widget. All it does is output some js to make jquery.post requests to a local php file. The local php file makes a request to a webservice for some data. (I had to do it this way instead of directly querying the web service with jquery.ajax because the url contains a license key that would be public if put in the js). Anyway, When I am viewing a page in the wordpress blog that has both the sidebar widget and the plugin output via shortcode only one of the requests work. I mean it works in that it gets a response back from the php script. Once the page is loaded they both work normally when manually told to. Webpage view - send 2 post requests to my php script - both elements should be filed in, but only one is. My php script is just: <?php if(isset($_POST["zip"])) { // build a curl object, execute the request, // and basically just echo what the curl request returns. } ?> Pretty basic. here is some js some people wanted to see: function widget_getActivities( zip ){ jQuery("#widget_active_list").text(""); jQuery.post("http://localhost/wordpress/wp-content/ActiveAjax.php", { zip: zip}, function(text) { jQuery(text).find("asset").each(function(j, aval){ var html = ""; html += "<a href='" + jQuery(aval).find("trackback").text() + "' target='new'> " + jQuery(aval).find("assetName").text() + "</a><b> at </b>"; jQuery("location", aval).each(function(i, val){ html += jQuery("locationName", val).text() + " <b> on </b>"; }); jQuery("date", aval).each(function(){ html += jQuery("startDate", aval).text(); <!--jQuery("#widget_active_list").append("<div id='ActivityEntry'>" + html + " </div>");--> jQuery("#widget_active_list") .append(jQuery("<div>") .addClass("widget_ActivityEntry") .html(html) .bind("mouseenter", function(){ jQuery(this).animate({ fontSize: "20px", lineHeight: "1.2em" }, 50); }) .bind("mouseleave", function(){ jQuery(this).animate({ fontSize: "10px", lineHeight: "1.2em" }, 50); }) ); }); }); }); } Now imagine there is another function identical to this one except everything that is prepended with 'widget_' isn't prepended. These two functions get called separately via: jQuery(document).ready(function(){ w_zip = jQuery("#widget_zip").val(); widget_getActivities( w_zip ); jQuery("#widget_updateZipLink").click(function() { //start function when any update link is clicked widget_c_zip = jQuery("#widget_zip").val(); if (undefined == widget_c_zip || widget_c_zip == "" || widget_c_zip.length != 5) jQuery("#widget_zipError").text("Bad zip code"); else widget_getActivities( widget_c_zip ); }); }) I can see in my apache logs that both requests are being made. I'm guessing it is some sort of race condition but that doesn't make ANY sense. I'm new to all this, any ideas? EDIT: I've come up with a sub-optimal solution. I have my widget detect if the plugin is also being used on the page, and if so it waits for 3 seconds before performing the request. But I have a feeling this same thing is going to happen if multiple clients perform a page request at the same time that triggers one of the requests to my php script, because I believe the problem is in the php script, which is scary.

    Read the article

  • spring JDBC

    - by Adhir
    I am getting the following exception whe using derby to do a UPDATE in oracle Database org.springframework.jdbc.CannotGetJdbcConnectionException: Could not get JDBC Connection; nested exception is org.apache.derby.client.am.DisconnectException: A communication error has been detected. Communication protocol being used: Reply.fill(). Communication API being used: InputStream.read(). Location where the error was detected: insufficient data. Communication function detecting the error: *. Protocol specific error codes(s) TCP/IP SOCKETS at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:82) at org.springframework.jdbc.core.JdbcTemplate.execute(JdbcTemplate.java:522) at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:737) at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:795) at org.springframework.jdbc.core.JdbcTemplate.update(JdbcTemplate.java:803) at com.poc.data.dao.UserDerbyDao.create(UserDerbyDao.java:19) at com.poc.register.RegisterUtil.registerUser(RegisterUtil.java:34) at com.poc.service.MyService.doRegister(MyService.java:108) at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method) at sun.reflect.NativeMethodAccessorImpl.invoke(Unknown Source) at sun.reflect.DelegatingMethodAccessorImpl.invoke(Unknown Source) at java.lang.reflect.Method.invoke(Unknown Source) at com.sun.jersey.server.impl.model.method.dispatch.AbstractResourceMethodDispatchProvider$ResponseOutInvoker._dispatch(AbstractResourceMethodDispatchProvider.java:175) at com.sun.jersey.server.impl.model.method.dispatch.ResourceJavaMethodDispatcher.dispatch(ResourceJavaMethodDispatcher.java:67) at com.sun.jersey.server.impl.uri.rules.HttpMethodRule.accept(HttpMethodRule.java:166) at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:114) at com.sun.jersey.server.impl.uri.rules.ResourceClassRule.accept(ResourceClassRule.java:74) at com.sun.jersey.server.impl.uri.rules.RightHandPathRule.accept(RightHandPathRule.java:114) at com.sun.jersey.server.impl.uri.rules.RootResourceClassesRule.accept(RootResourceClassesRule.java:66) at com.sun.jersey.server.impl.application.WebApplicationImpl._handleRequest(WebApplicationImpl.java:658) at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:616) at com.sun.jersey.server.impl.application.WebApplicationImpl.handleRequest(WebApplicationImpl.java:607) at com.sun.jersey.spi.container.servlet.WebComponent.service(WebComponent.java:309) at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:425) at com.sun.jersey.spi.container.servlet.ServletContainer.service(ServletContainer.java:590) at javax.servlet.http.HttpServlet.service(HttpServlet.java:806) at org.apache.catalina.core.ApplicationFilterChain.internalDoFilter(ApplicationFilterChain.java:290) at org.apache.catalina.core.ApplicationFilterChain.doFilter(ApplicationFilterChain.java:206) at org.apache.catalina.core.StandardWrapperValve.invoke(StandardWrapperValve.java:233) at org.apache.catalina.core.StandardContextValve.invoke(StandardContextValve.java:191) at org.apache.catalina.core.StandardHostValve.invoke(StandardHostValve.java:128) at org.apache.catalina.valves.ErrorReportValve.invoke(ErrorReportValve.java:102) at org.apache.catalina.core.StandardEngineValve.invoke(StandardEngineValve.java:109) at org.apache.catalina.connector.CoyoteAdapter.service(CoyoteAdapter.java:286) at org.apache.coyote.http11.Http11Processor.process(Http11Processor.java:845) at org.apache.coyote.http11.Http11Protocol$Http11ConnectionHandler.process(Http11Protocol.java:583) at org.apache.tomcat.util.net.JIoEndpoint$Worker.run(JIoEndpoint.java:447) at java.lang.Thread.run(Unknown Source) Caused by: org.apache.derby.client.am.DisconnectException: A communication error has been detected. Communication protocol being used: Reply.fill(). Communication API being used: InputStream.read(). Location where the error was detected: insufficient data. Communication function detecting the error: *. Protocol specific error codes(s) TCP/IP SOCKETS at org.apache.derby.client.net.NetAgent.throwCommunicationsFailure(Unknown Source) at org.apache.derby.client.net.Reply.fill(Unknown Source) at org.apache.derby.client.net.Reply.ensureALayerDataInBuffer(Unknown Source) at org.apache.derby.client.net.Reply.readDssHeader(Unknown Source) at org.apache.derby.client.net.Reply.startSameIdChainParse(Unknown Source) at org.apache.derby.client.net.NetConnectionReply.readExchangeServerAttributes(Unknown Source) at org.apache.derby.client.net.NetConnection.readServerAttributesAndKeyExchange(Unknown Source) at org.apache.derby.client.net.NetConnection.flowServerAttributesAndKeyExchange(Unknown Source) at org.apache.derby.client.net.NetConnection.flowUSRIDPWDconnect(Unknown Source) at org.apache.derby.client.net.NetConnection.flowConnect(Unknown Source) at org.apache.derby.client.net.NetConnection.(Unknown Source) at org.apache.derby.jdbc.ClientDriver.connect(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at java.sql.DriverManager.getConnection(Unknown Source) at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:291) at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:277) at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnectionFromDriverManager(DriverManagerDataSource.java:259) at org.springframework.jdbc.datasource.DriverManagerDataSource.getConnection(DriverManagerDataSource.java:240) at org.springframework.jdbc.datasource.DataSourceUtils.doGetConnection(DataSourceUtils.java:113) at org.springframework.jdbc.datasource.DataSourceUtils.getConnection(DataSourceUtils.java:79) ... 37 more Any help Thanks in advance Adhir

    Read the article

  • Event receiver on Content Type not triggered on WikiPageLibrary

    - by Ciprian Grosu
    Hello all, I created a new content type for a wiki page library. I added this content type to library by code (the interface did not allow this). Next, I added an event receiver to this content type (on ItemAdded and ItemAdding). My problem is that no event is trrigered. If I add this events directly to the wiki page library all works fine. Is there a limitation/bug/trick ? I looked at the content type attached to the library with SharePoint Manager and in his schema the part for event receiver is missing...I know that there should be something like: <XmlDocuments> <XmlDocument NamespaceURI="http://schemas.microsoft.com/sharepoint/events"> <spe:Receivers xmlns:spe="http://schemas.microsoft.com/sharepoint/events"> <Receiver> <Name> </Name> <Type>1</Type> <SequenceNumber>10000</SequenceNumber> <Assembly>RssFeedWP, Version=1.0.0.0, Culture=neutral, PublicKeyToken=f6722cbeba696def</Assembly> <Class>RssFeedWP.ItemEventReceiver</Class> <Data> </Data> <Filter> </Filter> </Receiver> <Receiver> <Name> </Name> <Type>10001</Type> <SequenceNumber>10000</SequenceNumber> <Assembly>RssFeedWP, Version=1.0.0.0, Culture=neutral, PublicKeyToken=f6722cbeba696def</Assembly> <Class>RssFeedWP.ItemEventReceiver</Class> <Data> </Data> <Filter> </Filter> </Receiver> </spe:Receivers> </XmlDocument> If I look with SPM to the content type added to site I see this part into schema. Here is my code: public override void FeatureActivated(SPFeatureReceiverProperties properties) { using (SPWeb web = (SPWeb)properties.Feature.Parent) { // create RssWiki content type SPContentType rssFeedContentType = new SPContentType(web.AvailableContentTypes["Wiki Page"], web.ContentTypes, "RssFeed Wiki Page"); // add rssfeed url field to the new content type AddFieldToContentType(web, rssFeedContentType, "RssFeed Url", SPFieldType.Note); // add use xslt check box field to the new content type AddFieldToContentType(web, rssFeedContentType, "Use Xslt", SPFieldType.Boolean); // add xslt url field to the new content type AddFieldToContentType(web, rssFeedContentType, "Xslt Url", SPFieldType.Note); web.ContentTypes.Add(rssFeedContentType); rssFeedContentType.Update(); web.Update(); AddContentTypeToList(web, rssFeedContentType); AddEventReceiversToCT(rssFeedContentType); //AddEventReceiverToList(web); } } private void AddFieldToContentType(SPWeb web, SPContentType ct, string fieldName, SPFieldType fieldType) { SPField rssUrlField = null; try { rssUrlField = web.Fields.GetField(fieldName); } catch (Exception ex) { if (rssUrlField == null) { web.Fields.Add(fieldName, fieldType, false); } } SPFieldLink rssUrlFieldLink = new SPFieldLink(web.Fields[fieldName]); ct.FieldLinks.Add(rssUrlFieldLink); } private static void AddContentTypeToList(SPWeb web, SPContentType ct) { SPList wikiList = web.Lists[listName]; wikiList.ContentTypesEnabled = true; wikiList.ContentTypes.Add(ct); wikiList.Update(); } private static void AddEventReceiversToCT(SPContentType ct) { //add event receivers string assemblyName = System.Reflection.Assembly.GetExecutingAssembly().FullName; string ctReceiverName = "RssFeedWP.ItemEventReceiver"; ct.EventReceivers.Add(SPEventReceiverType.ItemAdding, assemblyName, ctReceiverName); ct.EventReceivers.Add(SPEventReceiverType.ItemAdded, assemblyName, ctReceiverName); ct.Update(); } Thx !

    Read the article

  • xmlns='' was not expected when deserializing nested classes

    - by Mavrik
    I have a problem when attempting to serialize class on a server, send it to the client and deserialize is on the destination. On the server I have the following two classes: [XmlRoot("StatusUpdate")] public class GameStatusUpdate { public GameStatusUpdate() {} public GameStatusUpdate(Player[] players, Command command) { this.Players = players; this.Update = command; } [XmlArray("Players")] public Player[] Players { get; set; } [XmlElement("Command")] public Command Update { get; set; } } and [XmlRoot("Player")] public class Player { public Player() {} public Player(PlayerColors color) { Color = color; ... } [XmlAttribute("Color")] public PlayerColors Color { get; set; } [XmlAttribute("X")] public int X { get; set; } [XmlAttribute("Y")] public int Y { get; set; } } (The missing types are all enums). This generates the following XML on serialization: <?xml version="1.0" encoding="utf-16"?> <StatusUpdate> <Players> <Player Color="Cyan" X="67" Y="32" /> </Players> <Command>StartGame</Command> </StatusUpdate> On the client side, I'm attempting to deserialize that into following classes: [XmlRoot("StatusUpdate")] public class StatusUpdate { public StatusUpdate() { } [XmlArray("Players")] [XmlArrayItem("Player")] public PlayerInfo[] Players { get; set; } [XmlElement("Command")] public Command Update { get; set; } } and [XmlRoot("Player")] public class PlayerInfo { public PlayerInfo() { } [XmlAttribute("X")] public int X { get; set; } [XmlAttribute("Y")] public int Y { get; set; } [XmlAttribute("Color")] public PlayerColor Color { get; set; } } However, the deserializer throws an exception: There is an error in XML document (2, 2). <StatusUpdate xmlns=''> was not expected. What am I missing or doing wrong? EDIT: On request I'm also adding code used to serialize and deserialize: Server: public static byte[] SerializeObject(Object obj) { XmlSerializer xmlSerializer = new XmlSerializer(obj.GetType()); StringWriter writer = new StringWriter(); // Clear pre-defined namespaces XmlSerializerNamespaces xsn = new XmlSerializerNamespaces(); xsn.Add("", ""); xmlSerializer.Serialize(writer, obj, xsn); writer.Flush(); // Send as little-endian UTF-16 string because the Serializer denotes XML as // utf-18 which cannot be easly changed UnicodeEncoding encoder = new UnicodeEncoding(false, false); return encoder.GetBytes(writer.ToString()); } Client: public static object DeserializeXml(string xmlData, Type type) { XmlSerializer xmlSerializer = new XmlSerializer(type); StringReader reader = new StringReader(xmlData); object obj = xmlSerializer.Deserialize(reader); return obj; } Deserialization is invoked with StatusUpdate update = (StatusUpdate) Util.DeserializeXml(xmlData, typeof (StatusUpdate));

    Read the article

  • Simple XML variable returns "0"

    - by Warren Haskins
    Ok, so im working with tumblr's API and im using SimpleXMLElement with php and ive run into a problem. Basically, when I call on a variable it just prints a zero. for instance : <?php echo $data->posts->post[0]->photo-url[5]; ?> This just breaks the page, and when I leave out the [5] it just prints zero I want to echo the photo-url with the number [5] but I cant get my head around this and its killing me. I just dont understand why it wont work. Heres a sample of the simpleXMLElement print-out : SimpleXMLElement Object ( [@attributes] = Array ( [version] = 1.0 ) [posts] => SimpleXMLElement Object ( [@attributes] => Array ( [type] => photo ) [post] => Array ( [0] => SimpleXMLElement Object ( [@attributes] => Array ( [id] => 574166180 [url] => http://young-n-reckless.tumblr.com/post/574166180 [url-with-slug] => http://young-n-reckless.tumblr.com/post/574166180 [type] => photo [date-gmt] => 2010-05-05 19:52:46 GMT [date] => Wed, 05 May 2010 15:52:46 [unix-timestamp] => 1273089166 [format] => html [reblog-key] => vc9EfT7d [slug] => [tumblelog] => young-n-reckless [bookmarklet] => true ) [tumblelog] => SimpleXMLElement Object ( [@attributes] => Array ( [title] => Young & Reckless [name] => young-n-reckless [url] => http://young-n-reckless.tumblr.com/ [timezone] => US/Eastern [avatar-url-16] => http://24.media.tumblr.com/avatar_424f776dd55c_16.png [avatar-url-24] => http://24.media.tumblr.com/avatar_424f776dd55c_24.png [avatar-url-30] => http://24.media.tumblr.com/avatar_424f776dd55c_30.png [avatar-url-40] => http://25.media.tumblr.com/avatar_424f776dd55c_40.png [avatar-url-48] => http://24.media.tumblr.com/avatar_424f776dd55c_48.png [avatar-url-64] => http://26.media.tumblr.com/avatar_424f776dd55c_64.png [avatar-url-96] => http://25.media.tumblr.com/avatar_424f776dd55c_96.png [avatar-url-128] => http://24.media.tumblr.com/avatar_424f776dd55c_128.png [avatar-url-512] => http://29.media.tumblr.com/avatar_424f776dd55c_512.png ) ) [photo-link-url] => http://www.flickr.com/photos/katiemabey/3429588812/ [photo-url] => Array ( [0] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [1] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_500.jpg [2] => http://25.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_400.jpg [3] => http://28.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_250.jpg [4] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_100.jpg [5] => http://30.media.tumblr.com/tumblr_l1w1qd7Zcg1qatgoto1_75sq.jpg ) ) Any help would be greatly appreciated, and thanks in advance. Warren

    Read the article

  • Why does C# thread die?

    - by JackN
    This is my 1st C# project so I may be doing something obviously improper in the code below. I am using .NET, WinForms (I think), and this is a desktop application until I get the bugs out. UpdateGui() uses Invoke((MethodInvoker)delegate to update various GUI controls based on received serial data and sends a GetStatus() command out the serial port 4 times a second. Thread Read() reads the response from serial port whenever it arrives which should be near immediate. SerialPortFixer is a SerialPort IOException Workaround in C# I found at http://zachsaw.blogspot.com/2010/07/serialport-ioexception-workaround-in-c.html. After one or both threads die I'll see something like The thread 0x1288 has exited with code 0 (0x0). in the debug code output. Why do UpdateGui() and/or Read() eventually die? public partial class UpdateStatus : Form { private readonly byte[] Command = new byte[32]; private readonly byte[] Status = new byte[32]; readonly Thread readThread; private static readonly Mutex commandMutex = new Mutex(); private static readonly Mutex statusMutex = new Mutex(); ... public UpdateStatus() { InitializeComponent(); SerialPortFixer.Execute("COM2"); if (serialPort1.IsOpen) { serialPort1.Close(); } try { serialPort1.Open(); } catch (Exception e) { labelWarning.Text = LOST_COMMUNICATIONS + e; labelStatus.Text = LOST_COMMUNICATIONS + e; labelWarning.Visible = true; } readThread = new Thread(Read); readThread.Start(); new Timer(UpdateGui, null, 0, 250); } static void ProcessStatus(byte[] status) { Status.State = (State) status[4]; Status.Speed = status[6]; // MSB Status.Speed *= 256; Status.Speed += status[5]; var Speed = Status.Speed/GEAR_RATIO; Status.Speed = (int) Speed; ... } public void Read() { while (serialPort1 != null) { try { serialPort1.Read(Status, 0, 1); if (Status[0] != StartCharacter[0]) continue; serialPort1.Read(Status, 1, 1); if (Status[1] != StartCharacter[1]) continue; serialPort1.Read(Status, 2, 1); if (Status[2] != (int)Command.GetStatus) continue; serialPort1.Read(Status, 3, 1); ... statusMutex.WaitOne(); ProcessStatus(Status); Status.update = true; statusMutex.ReleaseMutex(); } catch (Exception e) { Console.WriteLine(@"ERROR! Read() " + e); } } } public void GetStatus() { const int parameterLength = 0; // For GetStatus statusMutex.WaitOne(); Status.update = false; statusMutex.ReleaseMutex(); commandMutex.WaitOne(); if (!SendCommand(Command.GetStatus, parameterLength)) { Console.WriteLine(@"ERROR! SendCommand(GetStatus)"); } commandMutex.ReleaseMutex(); } private void UpdateGui(object x) { try { Invoke((MethodInvoker)delegate { Text = DateTime.Now.ToLongTimeString(); statusMutex.WaitOne(); if (Status.update) { if (Status.Speed > progressBarSpeed.Maximum) { Status.Speed = progressBarSpeed.Maximum; } progressBarSpeed.Value = Status.Speed; labelSpeed.Text = Status.Speed + RPM; ... } else { labelWarning.Text = LOST_COMMUNICATIONS; labelStatus.Text = LOST_COMMUNICATIONS; labelWarning.Visible = true; } statusMutex.ReleaseMutex(); GetStatus(); }); } catch (Exception e) { Console.WriteLine(@"ERROR! UpdateGui() " + e); } } }

    Read the article

  • How do I handle calls to AudioTrack from jni without crashing?

    - by icecream
    I was trying to write to an AudioTrack from a jni callback, and I get a signal 7 (SIGBUS), fault addr 00000000. I have looked at the Wolf3D example for odroid and they seem to use a android.os.Handler to post a Runnable that will do an update in the correct thread context. I have also tried AttachCurrentThread, but I fail in this case also. It works to play the sound when running from the constructor even if I wrap it in a thread and then post it to the handler. When I do the "same" via a callback from jni it fails. I assume I am braeaking some rules, but I haven't been able to figure out what they are. So far, I haven't found the answer here on SO. So I wonder if anyone knows how this should be done. EDIT: Answered below. The following code is to illustrate the problem. Java: package com.example.jniaudiotrack; import android.app.Activity; import android.media.AudioFormat; import android.media.AudioManager; import android.media.AudioTrack; import android.os.Bundle; import android.os.Handler; import android.util.Log; public class JniAudioTrackActivity extends Activity { AudioTrack mAudioTrack; byte[] mArr; public static final Handler mHandler = new Handler(); /** Called when the activity is first created. */ @Override public void onCreate(Bundle savedInstanceState) { super.onCreate(savedInstanceState); setContentView(R.layout.main); mArr = new byte[2048]; for (int i = 0; i < 2048; i++) { mArr[i] = (byte) (Math.sin(i) * 128); } mAudioTrack = new AudioTrack(AudioManager.STREAM_MUSIC, 11025, AudioFormat.CHANNEL_CONFIGURATION_MONO, AudioFormat.ENCODING_PCM_8BIT, 2048, AudioTrack.MODE_STREAM); mAudioTrack.play(); new Thread(new Runnable() { public void run() { mHandler.post(new Runnable() { public void run() { mAudioTrack.write(mArr, 0, 2048); Log.i(TAG, "*** Handler from constructor ***"); } }); } }).start(); new Thread(new Runnable() { public void run() { audioFunc(); } }).start(); } public native void audioFunc(); @SuppressWarnings("unused") private void audioCB() { mHandler.post(new Runnable() { public void run() { mAudioTrack.write(mArr, 0, 2048); Log.i(TAG, "*** audioCB called ***"); } }); } private static final String TAG = "JniAudioTrackActivity"; static { System.loadLibrary("jni_audiotrack"); } } cpp: #include <jni.h> extern "C" { JNIEXPORT void Java_com_example_jniaudiotrack_JniAudioTrackActivity_audioFunc(JNIEnv* env, jobject obj); } JNIEXPORT void Java_com_example_jniaudiotrack_JniAudioTrackActivity_audioFunc(JNIEnv* env, jobject obj) { JNIEnv* jniEnv; JavaVM* vm; env->GetJavaVM(&vm); vm->AttachCurrentThread(&jniEnv, 0); jclass cls = env->GetObjectClass(obj); jmethodID audioCBID = env->GetMethodID(cls, "audioCB", "()V"); if (!audioCBID) { return; } env->CallVoidMethod(cls, audioCBID); } Trace snippet: I/DEBUG ( 1653): pid: 9811, tid: 9811 >>> com.example.jniaudiotrack <<< I/DEBUG ( 1653): signal 7 (SIGBUS), fault addr 00000000 I/DEBUG ( 1653): r0 00000800 r1 00000026 r2 00000001 r3 00000000 I/DEBUG ( 1653): r4 42385726 r5 41049e54 r6 bee25570 r7 ad00e540 I/DEBUG ( 1653): r8 000040f8 r9 41048200 10 41049e44 fp 00000000 I/DEBUG ( 1653): ip 000000f8 sp bee25530 lr ad02dbb5 pc ad012358 cpsr 20000010 I/DEBUG ( 1653): #00 pc 00012358 /system/lib/libdvm.so

    Read the article

  • Binding DataTable To GridView, But No Rows In GridViewRowCollection Despite GridView Population?

    - by KSwift87
    Problem: I've coded a GridView in the markup in a page. I have coded a DataTable in the code-behind that takes data from a collection of custom objects. I then bind that DataTable to the GridView. (Specific problem mentioned a couple code-snippets below.) GridView Markup: <asp:GridView ID="gvCart" runat="server" CssClass="pList" AutoGenerateColumns="false" DataKeyNames="ProductID"> <Columns> <asp:BoundField DataField="ProductID" HeaderText="ProductID" /> <asp:BoundField DataField="Name" HeaderText="ProductName" /> <asp:ImageField DataImageUrlField="Thumbnail" HeaderText="Thumbnail"></asp:ImageField> <asp:BoundField DataField="Unit Price" HeaderText="Unit Price" /> <asp:TemplateField HeaderText="Quantity"> <ItemTemplate> <asp:TextBox ID="Quantity" runat="server" Text="<%# Bind('Quantity') %>" Width="25px"></asp:TextBox> </ItemTemplate> </asp:TemplateField> <asp:BoundField DataField="Total Price" HeaderText="Total Price" /> </Columns> </asp:GridView> DataTable Code-Behind: private void View(List<OrderItem> cart) { DataSet ds = new DataSet(); DataTable dt = ds.Tables.Add("Cart"); if (cart != null) { dt.Columns.Add("ProductID"); dt.Columns.Add("Name"); dt.Columns.Add("Thumbnail"); dt.Columns.Add("Unit Price"); dt.Columns.Add("Quantity"); dt.Columns.Add("Total Price"); foreach (OrderItem item in cart) { DataRow dr = dt.NewRow(); dr["ProductID"] = item.productId.ToString(); dr["Name"] = item.productName; dr["Thumbnail"] = ResolveUrl(item.productThumbnail); dr["Unit Price"] = "$" + item.productPrice.ToString(); dr["Quantity"] = item.productQuantity.ToString(); dr["Total Price"] = "$" + (item.productPrice * item.productQuantity).ToString(); dt.Rows.Add(dr); } gvCart.DataSource = dt; gvCart.DataBind(); gvCart.Width = 500; for (int counter = 0; counter < gvCart.Rows.Count; counter++) { gvCart.Rows[counter].Cells.Add(Common.createCell("<a href='cart.aspx?action=update&prodId=" + gvCart.Rows[counter].Cells[0].Text + "'>Update</a><br /><a href='cart.aspx?action='action=remove&prodId=" + gvCart.Rows[counter].Cells[0].Text + "/>Remove</a>")); } } } Error occurs below in the foreach - the GridViewRowCollection is empty! private void Update(string prodId) { List<OrderItem> cart = (List<OrderItem>)Session["cart"]; int uQty = 0; foreach (GridViewRow gvr in gvCart.Rows) { if (gvr.RowType == DataControlRowType.DataRow) { if (gvr.Cells[0].Text == prodId) { uQty = int.Parse(((TextBox)gvr.Cells[4].FindControl("Quantity")).Text); } } } Goal: I'm basically trying to find a way to update the data in my GridView (and more importantly my cart Session object) without having to do everything else I've seen online such as utilizing OnRowUpdate, etc. Could someone please tell me why gvCart.Rows is empty and/or how I could accomplish my goal without utilizing OnRowUpdate, etc.? When I execute this code, the GridView gets populated but for some reason I can't access any of its rows in the code-behind.

    Read the article

  • Incremental PCA

    - by smichak
    Hi, Lately, I've been looking into an implementation of an incremental PCA algorithm in python - I couldn't find something that would meet my needs so I did some reading and implemented an algorithm I found in some paper. Here is the module's code - the relevant paper on which it is based is mentioned in the module's documentation. I would appreciate any feedback from people who are interested in this. Micha #!/usr/bin/env python """ Incremental PCA calculation module. Based on P.Hall, D. Marshall and R. Martin "Incremental Eigenalysis for Classification" which appeared in British Machine Vision Conference, volume 1, pages 286-295, September 1998. Principal components are updated sequentially as new observations are introduced. Each new observation (x) is projected on the eigenspace spanned by the current principal components (U) and the residual vector (r = x - U(U.T*x)) is used as a new principal component (U' = [U r]). The new principal components are then rotated by a rotation matrix (R) whose columns are the eigenvectors of the transformed covariance matrix (D=U'.T*C*U) to yield p + 1 principal components. From those, only the first p are selected. """ __author__ = "Micha Kalfon" import numpy as np _ZERO_THRESHOLD = 1e-9 # Everything below this is zero class IPCA(object): """Incremental PCA calculation object. General Parameters: m - Number of variables per observation n - Number of observations p - Dimension to which the data should be reduced """ def __init__(self, m, p): """Creates an incremental PCA object for m-dimensional observations in order to reduce them to a p-dimensional subspace. @param m: Number of variables per observation. @param p: Number of principle components. @return: An IPCA object. """ self._m = float(m) self._n = 0.0 self._p = float(p) self._mean = np.matrix(np.zeros((m , 1), dtype=np.float64)) self._covariance = np.matrix(np.zeros((m, m), dtype=np.float64)) self._eigenvectors = np.matrix(np.zeros((m, p), dtype=np.float64)) self._eigenvalues = np.matrix(np.zeros((1, p), dtype=np.float64)) def update(self, x): """Updates with a new observation vector x. @param x: Next observation as a column vector (m x 1). """ m = self._m n = self._n p = self._p mean = self._mean C = self._covariance U = self._eigenvectors E = self._eigenvalues if type(x) is not np.matrix or x.shape != (m, 1): raise TypeError('Input is not a matrix (%d, 1)' % int(m)) # Update covariance matrix and mean vector and centralize input around # new mean oldmean = mean mean = (n*mean + x) / (n + 1.0) C = (n*C + x*x.T + n*oldmean*oldmean.T - (n+1)*mean*mean.T) / (n + 1.0) x -= mean # Project new input on current p-dimensional subspace and calculate # the normalized residual vector g = U.T*x r = x - (U*g) r = (r / np.linalg.norm(r)) if not _is_zero(r) else np.zeros_like(r) # Extend the transformation matrix with the residual vector and find # the rotation matrix by solving the eigenproblem DR=RE U = np.concatenate((U, r), 1) D = U.T*C*U (E, R) = np.linalg.eigh(D) # Sort eigenvalues and eigenvectors from largest to smallest to get the # rotation matrix R sorter = list(reversed(E.argsort(0))) E = E[sorter] R = R[:,sorter] # Apply the rotation matrix U = U*R # Select only p largest eigenvectors and values and update state self._n += 1.0 self._mean = mean self._covariance = C self._eigenvectors = U[:, 0:p] self._eigenvalues = E[0:p] @property def components(self): """Returns a matrix with the current principal components as columns. """ return self._eigenvectors @property def variances(self): """Returns a list with the appropriate variance along each principal component. """ return self._eigenvalues def _is_zero(x): """Return a boolean indicating whether the given vector is a zero vector up to a threshold. """ return np.fabs(x).min() < _ZERO_THRESHOLD if __name__ == '__main__': import sys def pca_svd(X): X = X - X.mean(0).repeat(X.shape[0], 0) [_, _, V] = np.linalg.svd(X) return V N = 1000 obs = np.matrix([np.random.normal(size=10) for _ in xrange(N)]) V = pca_svd(obs) print V[0:2] pca = IPCA(obs.shape[1], 2) for i in xrange(obs.shape[0]): x = obs[i,:].transpose() pca.update(x) U = pca.components print U

    Read the article

  • Adding interactions to admin pages generated by the admin generator

    - by Stick it to THE MAN
    I am using Symfony 1.2.9 (with Propel ORM) to create a website. I have started using the admin generator to implement the admin functionality. I have come accross a slight 'problem' however. My models are related (e.g. one table may have several 1:N relations and N:N relations). I have not found a way to address this satisfactorily yet. As a tactical solution (for list views), I have decided to simply show the parent object, and then add interactions to show the related objects. I'll use a Blog model to illustrate this. Here are the relationships for a blog model: N:M relationship with Blogroll (models a blog roll) 1:N relationship with Blogpost (models a post submitted to a blog) I had originally intended on displaying the (paged) blogpost list for a blog,, when it was selected, using AJAX, but I am struggling enough with the admin generator as it is, so I have shelved that idea - unless someone is kind enough to shed some light on how to do this. Instead, what I am now doing (as a tactical/interim soln), is I have added interactions to the list view which allow a user to: View a list of the blog roll for the blog on that row View a list of the posts for the blog on that row Add a post for the blog on tha row In all of the above, I have written actions that will basically forward the request to the approriate action (admin generated). However, I need to pass some parameters (like the blog id etc), so that the correct blog roll or blog post list etc is returned. I am sure there is a better way of doing what I want to do, but in case there isn't here are my questions: How may I obtain the object that relates to a specific row (of the clicked link) in the list view (e.g. the blog object in this example) Once I have the object, I may choose to extract various fields: id etc. How can I pass these arguments to the admin generated action ? Regarding the second question, my guess is that this may be the way to do it (I may be wrong) public function executeMyAddedBlogRollInteractionLink(sfWebRequest $request) { // get the object *somehow* (I'm guessing this may work) $object = $this->getRoute()->getObject(); // retrieve the required parameters from the object, and build a query string $query_str=$object->getId(); //forward the request to the generated code (action to display blogroll list in this case) $this->forward('backendmodulename',"getblogrolllistaction?params=$query_string"); } This feels like a bit of a hack, but I'm not sure how else to go about it. I'm also not to keen on sending params (which may include user_id etc via a GET, even a POST is not that much safer, since it is fairly sraightforward to see what requests a browser is making). if there is a better way than what I suggest above to implement this kind of administration that is required for objects with 1 or more M:N relationships, I will be very glad to hear the "recommended" way of going about it. I remember reading about marking certain actions as internal. i.e. callable from only within the app. I wonder if that would be useful in this instance?

    Read the article

  • Move <option> to top of list with Javascript

    - by Adam
    I'm trying to create a button that will move the currently selected OPTION in a SELECT MULTIPLE list to the top of that list. I currently have OptionTransfer.js implemented, which is allowing me to move items up and down the list. I want to add a new function function MoveOptionTop(obj) { ... } Here is the source of OptionTransfer.js // =================================================================== // Author: Matt Kruse // WWW: http://www.mattkruse.com/ // // NOTICE: You may use this code for any purpose, commercial or // private, without any further permission from the author. You may // remove this notice from your final code if you wish, however it is // appreciated by the author if at least my web site address is kept. // // You may *NOT* re-distribute this code in any way except through its // use. That means, you can include it in your product, or your web // site, or any other form where the code is actually being used. You // may not put the plain javascript up on your site for download or // include it in your javascript libraries for download. // If you wish to share this code with others, please just point them // to the URL instead. // Please DO NOT link directly to my .js files from your site. Copy // the files to your server and use them there. Thank you. // =================================================================== /* SOURCE FILE: selectbox.js */ function hasOptions(obj){if(obj!=null && obj.options!=null){return true;}return false;} function selectUnselectMatchingOptions(obj,regex,which,only){if(window.RegExp){if(which == "select"){var selected1=true;var selected2=false;}else if(which == "unselect"){var selected1=false;var selected2=true;}else{return;}var re = new RegExp(regex);if(!hasOptions(obj)){return;}for(var i=0;i(b.text+"")){return 1;}return 0;});for(var i=0;i3){var regex = arguments[3];if(regex != ""){unSelectMatchingOptions(from,regex);}}if(!hasOptions(from)){return;}for(var i=0;i=0;i--){var o = from.options[i];if(o.selected){from.options[i] = null;}}if((arguments.length=0;i--){if(obj.options[i].selected){if(i !=(obj.options.length-1) && ! obj.options[i+1].selected){swapOptions(obj,i,i+1);obj.options[i+1].selected = true;}}}} function removeSelectedOptions(from){if(!hasOptions(from)){return;}for(var i=(from.options.length-1);i=0;i--){var o=from.options[i];if(o.selected){from.options[i] = null;}}from.selectedIndex = -1;} function removeAllOptions(from){if(!hasOptions(from)){return;}for(var i=(from.options.length-1);i=0;i--){from.options[i] = null;}from.selectedIndex = -1;} function addOption(obj,text,value,selected){if(obj!=null && obj.options!=null){obj.options[obj.options.length] = new Option(text, value, false, selected);}} /* SOURCE FILE: OptionTransfer.js */ function OT_transferLeft(){moveSelectedOptions(this.right,this.left,this.autoSort,this.staticOptionRegex);this.update();} function OT_transferRight(){moveSelectedOptions(this.left,this.right,this.autoSort,this.staticOptionRegex);this.update();} function OT_transferAllLeft(){moveAllOptions(this.right,this.left,this.autoSort,this.staticOptionRegex);this.update();} function OT_transferAllRight(){moveAllOptions(this.left,this.right,this.autoSort,this.staticOptionRegex);this.update();} function OT_saveRemovedLeftOptions(f){this.removedLeftField = f;} function OT_saveRemovedRightOptions(f){this.removedRightField = f;} function OT_saveAddedLeftOptions(f){this.addedLeftField = f;} function OT_saveAddedRightOptions(f){this.addedRightField = f;} function OT_saveNewLeftOptions(f){this.newLeftField = f;} function OT_saveNewRightOptions(f){this.newRightField = f;} function OT_update(){var removedLeft = new Object();var removedRight = new Object();var addedLeft = new Object();var addedRight = new Object();var newLeft = new Object();var newRight = new Object();for(var i=0;i0){str=str+delimiter;}str=str+val;}return str;} function OT_setDelimiter(val){this.delimiter=val;} function OT_setAutoSort(val){this.autoSort=val;} function OT_setStaticOptionRegex(val){this.staticOptionRegex=val;} function OT_init(theform){this.form = theform;if(!theform[this.left]){alert("OptionTransfer init(): Left select list does not exist in form!");return false;}if(!theform[this.right]){alert("OptionTransfer init(): Right select list does not exist in form!");return false;}this.left=theform[this.left];this.right=theform[this.right];for(var i=0;i

    Read the article

  • Sending changes from multiple tables in disconnected dataset to SQLServer...

    - by Stecy
    We have a third party application that accept calls using an XML RPC mechanism for calling stored procs. We send a ZIP-compressed dataset containing multiple tables with a bunch of update/delete/insert using this mechanism. On the other end, a CLR sproc decompress the data and gets the dataset. Then, the following code gets executed: using (var conn = new SqlConnection("context connection=true")) { if (conn.State == ConnectionState.Closed) conn.Open(); try { foreach (DataTable table in ds.Tables) { string columnList = ""; for (int i = 0; i < table.Columns.Count; i++) { if (i == 0) columnList = table.Columns[0].ColumnName; else columnList += "," + table.Columns[i].ColumnName; } var da = new SqlDataAdapter("SELECT " + columnList + " FROM " + table.TableName, conn); var builder = new SqlCommandBuilder(da); builder.ConflictOption = ConflictOption.OverwriteChanges; da.RowUpdating += onUpdatingRow; da.Update(ds, table.TableName); } } catch (....) { ..... } } Here's the event handler for the RowUpdating event: public static void onUpdatingRow(object sender, SqlRowUpdatingEventArgs e) { if ((e.StatementType == StatementType.Update) && (e.Command == null)) { e.Command = CreateUpdateCommand(e.Row, sender as SqlDataAdapter); e.Status = UpdateStatus.Continue; } } and the CreateUpdateCommand method: private static SqlCommand CreateUpdateCommand(DataRow row, SqlDataAdapter da) { string whereClause = ""; string setClause = ""; SqlConnection conn = da.SelectCommand.Connection; for (int i = 0; i < row.Table.Columns.Count; i++) { char quoted; if ((row.Table.Columns[i].DataType == Type.GetType("System.String")) || (row.Table.Columns[i].DataType == Type.GetType("System.DateTime"))) quoted = '\''; else quoted = ' '; string val = row[i].ToString(); if (row.Table.Columns[i].DataType == Type.GetType("System.Boolean")) val = (bool)row[i] ? "1" : "0"; bool isPrimaryKey = false; for (int j = 0; j < row.Table.PrimaryKey.Length; j++) { if (row.Table.PrimaryKey[j].ColumnName == row.Table.Columns[i].ColumnName) { if (whereClause != "") whereClause += " AND "; if (row[i] == DBNull.Value) whereClause += row.Table.Columns[i].ColumnName + "=NULL"; else whereClause += row.Table.Columns[i].ColumnName + "=" + quoted + val + quoted; isPrimaryKey = true; break; } } /* Only values for column that is not a primary key can be modified */ if (!isPrimaryKey) { if (setClause != "") setClause += ", "; if (row[i] == DBNull.Value) setClause += row.Table.Columns[i].ColumnName + "=NULL"; else setClause += row.Table.Columns[i].ColumnName + "=" + quoted + val + quoted; } } return new SqlCommand("UPDATE " + row.Table.TableName + " SET " + setClause + " WHERE " + whereClause, conn); } However, this is really slow when we have a lot of records. Is there a way to optimize this or an entirely different way to send lots of udpate/delete on several tables? I would really much like to use TSQL for this but can't figure a way to send a dataset to a regular sproc. Additional notes: We cannot directly access the SQLServer database. We tried without compression and it was slower.

    Read the article

  • Run unit tests in Jenkins / Hudson in automated fashion from dev to build server

    - by Kevin Donde
    We are currently running a Jenkins (Hudson) CI server to build and package our .net web projects and database projects. Everything is working great but I want to start writing unit tests and then only passing the build if the unit tests pass. We are using the built in msbuild task to build the web project. With the following arguments ... MsBuild Version .NET 4.0 MsBuild Build File ./WebProjectFolder/WebProject.csproj Command Line Arguments ./target:Rebuild /p:Configuration=Release;DeployOnBuild=True;PackageLocation=".\obj\Release\WebProject.zip";PackageAsSingleFile=True We need to run automated tests over our code that run automatically when we build on our machines (post build event possibly) but also run when Jenkins does a build for that project. If you run it like this it doesn't build the unit tests project because the web project doesn't reference the test project. The test project would reference the web project but I'm pretty sure that would be butchering our automated builds as they exist primarily to build and package our deployments. Running these tests should be a step in that automated build and package process. Options ... Create two Jenkins jobs. one to run the tests ... if the tests pass another build is triggered which builds and packages the web project. Put the post build event on the test project. Build the solution instead of the project (make sure the solution contains the required tests) and put post build events on any test projects that would run the nunit console to run the tests. Then use the command line to copy all the required files from each of the bin and content directories into a package. Just build the test project in jenkins instead of the web project in jenkins. The test project would reference the web project (depending on what you're testing) and build it. Problems ... There's two jobs and not one. Two things to debug not one. One to see if the tests passed and one to build and compile the web project. The tests could pass but the build could fail if its something that isn't used by what you're testing ... This requires us to know exactly what goes into the build. Right now msbuild does it all for us. If you have multiple teams working on a project everytime an extra folder is created you have to worry about the possibly brittle command line statements. This seems like a corruption of our main purpose here. The tests should be a step in this process not the overriding most important thing in this process. I'm also not 100% sure that a triggered build is the same as a normal build does it do all the same things as a normal build. Move all the correct files in the same way move them all into the same directories etc. Initial problem. We want to run our tests whenever our main project is built. But adding a post build event to the web project that runs against the test project doesn't work because the web project doesn't reference the test project and won't trigger a build of this project. I could go on ... but that's enough ... We've spent about a week trying to make this work nicely but haven't succeeded. Feel free to edit this if you feel you can get a better response ...

    Read the article

  • which control in vs08 aspx c# will be able to take html tags as input and display it formatted accor

    - by user287745
    i asked a few questions regarding this and got answers that indicate i will have to make an costum build editor using ,markdown, .... to achieve something like stackoverflow.com/questions/ask page. there is time limitation and the requirements are that much, i have to achieve 1) allow users to using html tags when giving input 2) save that complete input to sql db 3) display the data in db withing a contol which renders the formatting as the tags specify. i am aware label and literal controls support html tags, the problem is how to allow the user to input the textbox does not seem the support html tags? thank you Need help in implementing the affect of the WRITE A NEW POST On stackoverflow.com <%--The editor--% <asp:UpdatePanel ID="UpdatePanel7" runat="server"> <ContentTemplate> <asp:Label ID="Label4" runat="server" Text="Label"></asp:Label> <div id="textchanging" onkeyup="textoftextbox('TextBox3'); return false;"> <asp:TextBox ID="TextBox3" runat="server" CausesValidation="True" ></asp:TextBox> </div> <%-- OnTextChanged="textoftextbox('TextBox3'); return false;" gives too man literals error. --%> <asp:Button ID="Button6" runat="server" Text="Post The Comment, The New, Write on Wall" onclick="Button6_Click" /> <asp:Label ID="Label2" runat="server" Text="Label"></asp:Label> <asp:TextBox ID="TextBox4" runat="server" CausesValidation="True"></asp:TextBox> <asp:Literal ID="Literal2" runat="server" Text="this must change" here comes the div <div id="displayingarea" runat="server">This area will change</div> </ContentTemplate> </asp:UpdatePanel> <%--The editor ends--%> protected void Button6_Click(object sender, EventArgs e) { Label3.Text = displayingarea.InnerHtml; } As you see, I have implemented the effect of typing text in textbox which appears as a reflection in the div WITH FULLY FORMATTED TEXT ACCORDIG TO THE HTML TAGS USED The textbox does not allow html! Well the text box doesnot have too, script just extracts what is typed, within letting the server know. The html of the div tag also changes as typed in textbox. Now, There is a “post” button within an update plane a avoid full post back of page What I needis when the button is clicked on the value withing the div tag “innerhtml” is passed on to the label. Yes I know the chnages are only made on the client side, So when the button click event occurs the server is not aware of the new data within the div tag, Therefore the server assign the original html withing the div to the lab. Need help to overcome this, How is it that what we enter text in the textbox press the button with coding like label1.text=textbox1.text; and it works even in update panel, but the aabove code for extracting innerhtml typed at users end similar to yping in textbox does not work?

    Read the article

  • Saving child collections with NHibernate

    - by Ben
    Hi, I am in the process or learning NHibernate so bare with me. I have an Order class and a Transaction class. Order has a one to many association with transaction. The transaction table in my database has a not null constraint on the OrderId foreign key. Order class: public class Order { public virtual Guid Id { get; set; } public virtual DateTime CreatedOn { get; set; } public virtual decimal Total { get; set; } public virtual ICollection<Transaction> Transactions { get; set; } public Order() { Transactions = new HashSet<Transaction>(); } } Order Mapping: <class name="Order" table="Orders"> <cache usage="read-write"/> <id name="Id"> <generator class="guid"/> </id> <property name="CreatedOn" type="datetime"/> <property name="Total" type="decimal"/> <set name="Transactions" table="Transactions" lazy="false" inverse="true"> <key column="OrderId"/> <one-to-many class="Transaction"/> </set> Transaction Class: public class Transaction { public virtual Guid Id { get; set; } public virtual DateTime ExecutedOn { get; set; } public virtual bool Success { get; set; } public virtual Order Order { get; set; } } Transaction Mapping: <class name="Transaction" table="Transactions"> <cache usage="read-write"/> <id name="Id" column="Id" type="Guid"> <generator class="guid"/> </id> <property name="ExecutedOn" type="datetime"/> <property name="Success" type="bool"/> <many-to-one name="Order" class="Order" column="OrderId" not-null="true"/> Really I don't want a bidirectional association. There is no need for my transaction objects to reference their order object directly (I just need to access the transactions of an order). However, I had to add this so that Order.Transactions is persisted to the database: Repository: public void Update(Order entity) { using (ISession session = NHibernateHelper.OpenSession()) { using (ITransaction transaction = session.BeginTransaction()) { session.Update(entity); foreach (var tx in entity.Transactions) { tx.Order = entity; session.SaveOrUpdate(tx); } transaction.Commit(); } } } My problem is that this will then issue an update for every transaction on the order collection (regardless of whether it has changed or not). What I was trying to get around was having to explicitly save the transaction before saving the order and instead just add the transactions to the order and then save the order: public void Can_add_transaction_to_existing_order() { var orderRepo = new OrderRepository(); var order = orderRepo.GetById(new Guid("aa3b5d04-c5c8-4ad9-9b3e-9ce73e488a9f")); Transaction tx = new Transaction(); tx.ExecutedOn = DateTime.Now; tx.Success = true; order.Transactions.Add(tx); orderRepo.Update(order); } Although I have found quite a few articles covering the set up of a one-to-many association, most of these discuss retrieving of data and not persisting back. Many thanks, Ben

    Read the article

  • How to write a bison grammer for WDI?

    - by Rizo
    I need some help in bison grammar construction. From my another question: I'm trying to make a meta-language for writing markup code (such as xml and html) wich can be directly embedded into C/C++ code. Here is a simple sample written in this language, I call it WDI (Web Development Interface): /* * Simple wdi/html sample source code */ #include <mySite> string name = "myName"; string toCapital(string str); html { head { title { mySiteTitle; } link(rel="stylesheet", href="style.css"); } body(id="default") { // Page content wrapper div(id="wrapper", class="some_class") { h1 { "Hello, " + toCapital(name) + "!"; } // Lists post ul(id="post_list") { for(post in posts) { li { a(href=post.getID()) { post.tilte; } } } } } } } Basically it is a C source with a user-friendly interface for html. As you can see the traditional tag-based style is substituted by C-like, with blocks delimited by curly braces. I need to build an interpreter to translate this code to html and posteriorly insert it into C, so that it can be compiled. The C part stays intact. Inside the wdi source it is not necessary to use prints, every return statement will be used for output (in printf function). The program's output will be clean html code. So, for example a heading 1 tag would be transformed like this: h1 { "Hello, " + toCapital(name) + "!"; } // would become: printf("<h1>Hello, %s!</h1>", toCapital(name)); My main goal is to create an interpreter to translate wdi source to html like this: tag(attributes) {content} = <tag attributes>content</tag> Secondly, html code returned by the interpreter has to be inserted into C code with printfs. Variables and functions that occur inside wdi should also be sorted in order to use them as printf parameters (the case of toCapital(name) in sample source). Here are my flex/bison files: id [a-zA-Z_]([a-zA-Z0-9_])* number [0-9]+ string \".*\" %% {id} { yylval.string = strdup(yytext); return(ID); } {number} { yylval.number = atoi(yytext); return(NUMBER); } {string} { yylval.string = strdup(yytext); return(STRING); } "(" { return(LPAREN); } ")" { return(RPAREN); } "{" { return(LBRACE); } "}" { return(RBRACE); } "=" { return(ASSIGN); } "," { return(COMMA); } ";" { return(SEMICOLON); } \n|\r|\f { /* ignore EOL */ } [ \t]+ { /* ignore whitespace */ } . { /* return(CCODE); Find C source */ } %% %start wdi %token LPAREN RPAREN LBRACE RBRACE ASSIGN COMMA SEMICOLON CCODE QUOTE %union { int number; char *string; } %token <string> ID STRING %token <number> NUMBER %% wdi : /* empty */ | blocks ; blocks : block | blocks block ; block : head SEMICOLON | head body ; head : ID | ID attributes ; attributes : LPAREN RPAREN | LPAREN attribute_list RPAREN ; attribute_list : attribute | attribute COMMA attribute_list ; attribute : key ASSIGN value ; key : ID {$$=$1} ; value : STRING {$$=$1} /*| NUMBER*/ /*| CCODE*/ ; body : LBRACE content RBRACE ; content : /* */ | blocks | STRING SEMICOLON | NUMBER SEMICOLON | CCODE ; %% I am having difficulties on defining a proper grammar for the language, specially in splitting WDI and C code . I just started learning language processing techniques so I need some orientation. Could someone correct my code or give some examples of what is the right way to solve this problem?

    Read the article

< Previous Page | 424 425 426 427 428 429 430 431 432 433 434 435  | Next Page >