Search Results

Search found 2229 results on 90 pages for 'conditions'.

Page 43/90 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• SFML: Generate a background image

  - by BlackMamba

  I want to generate a background, which is used in the game, on every instance of the game based on certain conditions. To do so, I'm using a sf::RenderTexture and a sf::Texture like this: sf::RenderTexture image; std::vector<sf::Texture> textures; sf::Texture texture; // instantiating the vector of textures and the image not shown here for (int i = 0; i < certainSize; ++i) { if(certainContition) { texture.setTexture("file"); texture.setPosition(pos1, pos2); } else { ... } image.draw(texture); } The point here is that I draw single textures on a sf::RenderTexture, but because textures always are on the graphic cards memory, I can't exceed a certain map size which I have to. I also considered using an sf::Image, but I can't find a way to draw an image (i.e. a texture) to it. The third way I found was using an sf::VertexArray, but this seems to be a bit too low-level for my rather simple purposes. So is there a common way to dynamically generate a background image based on other existing images?

  Read the article

• SQLAuthority News – A Successful Performance Tuning Seminar at Pune – Dec 4-5, 2010

  - by pinaldave

  This is report to my third of very successful seminar event on SQL Server Performance Tuning. SQL Server Performance Tuning Seminar in Colombo was oversubscribed with total of 35 attendees. You can read the details over here SQLAuthority News – SQL Server Performance Optimizations Seminar – Grand Success – Colombo, Sri Lanka – Oct 4 – 5, 2010. SQL Server Performance Tuning Seminar in Hyderabad was oversubscribed with total of 25 attendees. You can read the details over here SQL SERVER – A Successful Performance Tuning Seminar – Hyderabad – Nov 27-28, 2010. The same Seminar was offered in Pune on December 4,-5, 2010. We had another successful seminar with lots of performance talk. This seminar was attended by 30 attendees. The best part of the seminar was that along with the our agenda, we have talked about following very interesting concepts. Deadlocks Detection and Removal Dynamic SQL and Inline Code SQL Optimizations Multiple OR conditions and performance tuning Dynamic Search Condition Building and Improvement Memory Cache and Improvement Bottleneck Detections – Memory, CPU and IO Beginning Performance Tuning on Production Parametrization Improving already Super Fast Queries Convenience vs. Performance Proper way to create Indexes Hints and Disadvantages I had great time doing the seminar and sharing my performance tricks with all. The highlight of this seminar was I have explained the attendees, how I begin doing performance tuning when I go for Performance Tuning Consultations.   Pinal Dave at SQL Performance Tuning Seminar SQL Server Performance Tuning Seminar Pinal Dave at SQL Performance Tuning Seminar Pinal Dave at SQL Performance Tuning Seminar SQL Server Performance Tuning Seminar SQL Server Performance Tuning Seminar This seminar series are 100% demo oriented and no usual PowerPoint talk. They are created from my experiences of various organizations for performance tuning. I am not planning any more seminar this year as it was great but I am booked currently for next 60 days at various performance tuning engagements. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Pinal Dave, SQL, SQL Authority, SQL Optimization, SQL Performance, SQL Query, SQL Server, SQL Tips and Tricks, SQL Training, SQLAuthority News, T SQL, Technology

  Read the article

• ASP.Net Web API in Visual Studio 2010

  - by sreejukg

  Recently for one of my project, it was necessary to create couple of services. In the past I was using WCF, since my Services are going to be utilized through HTTP, I was thinking of ASP.Net web API. So I decided to create a Web API project. Now the real issue is that ASP.Net Web API launched after Visual Studio 2010 and I had to use ASP.Net web API in VS 2010 itself. By default there is no template available for Web API in Visual Studio 2010. Microsoft has made available an update that installs ASP.Net MVC 4 with web API in Visual Studio 2010. You can find the update from the below url. http://www.microsoft.com/en-us/download/details.aspx?id=30683 Though the update denotes ASP.Net MVC 4, this also includes ASP.Net Web API. Download the installation media and start the installer. As usual for any update, you need to agree on terms and conditions. The installation starts straight away, once you clicked the Install button. If everything goes ok, you will see the success message. Now open Visual Studio 2010, you can see ASP.Net MVC 4 Project template is available for you. Now you can create ASP.Net Web API project using Visual Studio 2010. When you create a new ASP.Net MVC 4 project, you can choose the Web API template. Further reading http://www.asp.net/web-api/overview/getting-started-with-aspnet-web-api/tutorial-your-first-web-api http://www.asp.net/mvc/mvc4

  Read the article

• Direct Links To Download Microsoft Office 2007 Products From Microsoft Download Servers

  - by Damodhar

  Downloading installers of Microsoft Office 2007 products from Microsoft Office website is not an easy task. To download any of the Microsoft Office 2007 products – you need to sign-in using Windows Live/Passport/Hotmail account, fill a big profile form and accept their terms & conditions. However even after gong through all the steps all you get is a link to download 60 day trail version installers. This is not cool! How about links that allows you to download the required installers directly from Microsoft Servers?   Here are the links to download Microsoft Office 2007 Applications & Suites directly from Microsoft download servers: Microsoft Office 2007 Product Installers Microsoft Office Home and Student 2007 Microsoft Office Standard 2007 Microsoft Office Professional 2007 Microsoft Office Small Business 2007 Microsoft Office Enterprise 2007 Microsoft Office OneNote 2007 Microsoft Office Publisher 2007 Microsoft Office Visio Professional 2007 Microsoft Office 2007 Service Packs Microsoft Office 2007 Service Pack 2 Microsoft Office 2007 Service Pack 1 Microsoft Office 2007 Viewers & Compatibility Packs Microsoft Word Viewer 2007 Microsoft PowerPoint Viewer 2007 Microsoft Excel Viewer 2007 Microsoft Visio Viewer 2007 Microsoft Office 2007 Compatibility Pack for Word, Excel, and PowerPoint File Formats CC image credit: flickr Related Posts:None FoundJoin us on Facebook to read all our stories right inside your Facebook news feed.

  Read the article

• Integrate Bing Search API into ASP.Net application

  - by sreejukg

  Couple of months back, I wrote an article about how to integrate Bing Search engine (API 2.0) with ASP.Net website. You can refer the article here http://weblogs.asp.net/sreejukg/archive/2012/04/07/integrate-bing-api-for-search-inside-asp-net-web-application.aspx Things are changing rapidly in the tech world and Bing has also changed! The Bing Search API 2.0 will work until August 1, 2012, after that it will not return results. Shocked? Don’t worry the API has moved to Windows Azure market place and available for you to sign up and continue using it and there is a free version available based on your usage. In this article, I am going to explain how you can integrate the new Bing API that is available in the Windows Azure market place with your website. You can access the Windows Azure market place from the below link https://datamarket.azure.com/ There is lot of applications available for you to subscribe and use. Bing is one of them. You can find the new Bing Search API from the below link https://datamarket.azure.com/dataset/5BA839F1-12CE-4CCE-BF57-A49D98D29A44 To get access to Bing Search API, first you need to register an account with Windows Azure market place. Sign in to the Windows Azure market place site using your windows live account. Once you sign in with your windows live account, you need to register to Windows Azure Market place account. From the Windows Azure market place, you will see the sign in button it the top right of the page. Clicking on the sign in button will take you to the Windows live ID authentication page. You can enter a windows live ID here to login. Once logged in you will see the Registration page for the Windows Azure market place as follows. You can agree or disagree for the email address usage by Microsoft. I believe selecting the check box means you will get email about what is happening in Windows Azure market place. Click on continue button once you are done. In the next page, you should accept the terms of use, it is not optional, you must agree to terms and conditions. Scroll down to the page and select the I agree checkbox and click on Register Button. Now you are a registered member of Windows Azure market place. You can subscribe to data applications. In order to use BING API in your application, you must obtain your account Key, in the previous version of Bing you were required an API key, the current version uses Account Key instead. Once you logged in to the Windows Azure market place, you can see “My Account” in the top menu, from the Top menu; go to “My Account” Section. From the My Account section, you can manage your subscriptions and Account Keys. Account Keys will be used by your applications to access the subscriptions from the market place. Click on My Account link, you can see Account Keys in the left menu and then Add an account key or you can use the default Account key available. Creating account key is very simple process. Also you can remove the account keys you create if necessary. The next step is to subscribe to BING Search API. At this moment, Bing Offers 2 APIs for search. The available options are as follows. 1. Bing Search API - https://datamarket.azure.com/dataset/5ba839f1-12ce-4cce-bf57-a49d98d29a44 2. Bing Search API – Web Results only - https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65 The difference is that the later will give you only web results where the other you can specify the source type such as image, video, web, news etc. Carefully choose the API based on your application requirements. In this article, I am going to use Web Results Only API, but the steps will be similar to both. Go to the API page https://datamarket.azure.com/dataset/8818f55e-2fe5-4ce3-a617-0b8ba8419f65, you can see the subscription options in the right side. And in the bottom of the page you can see the free option Since I am going to use the free options, just Click the Sign Up link for that. Just select I agree check box and click on the Sign Up button. You will get a recipt pagethat detail your subscription. Now you are ready Bing Search API – Web results. The next step is to integrate the API into your ASP.Net application. Now if you go to the Search API page (as well as in the Receipt page), you can see a .Net C# Class Library link, click on the link, you will get a code file named “BingSearchContainer.cs”. In the following sections I am going to demonstrate the use of Bing Search API from an ASP.Net application. Create an empty ASP.Net web application. In the solution explorer, the application will looks as follows. Now add the downloaded code file (“BingSearchContainer.cs”) to the project. Right click your project in solution explorer, Add -> existing item, then browse to the downloaded location, select the “BingSearchContainer.cs” file and add it to the project. To build the code file you need to add reference to the following library. System.Data.Services.Client You can find the library in the .Net tab, when you select Add -> Reference Try to build your project now; it should build without any errors. Add an ASP.Net page to the project. I have included a text box and a button, then a Grid View to the page. The idea is to Search the text entered and display the results in the gridview. The page will look in the Visual Studio Designer as follows. The markup of the page is as follows. In the button click event handler for the search button, I have used the following code. Now run your project and enter some text in the text box and click the Search button, you will see the results coming from Bing, cool. I entered the text “Microsoft” in the textbox and clicked on the button and I got the following results. Searching Specific Websites If you want to search a particular website, you pass the site url with site:<site url name> and if you have more sites, use pipe (|). e.g. The following search query site:microsoft.com | site:adobe.com design will search the word design and return the results from Microsoft.com and Adobe.com See the sample code that search only Microsoft.com for the text entered for the above sample. var webResults = bingContainer.Web("site:www.Microsoft.com " + txtSearch.Text, null, null, null, null, null, null); Paging the results returned by the API By default the BING API will return 100 results based on your query. The default code file that you downloaded from BING doesn’t include any option for this. You can modify the downloaded code to perform this paging. The BING API supports two parameters $top (for number of results to return) and $skip (for number of records to skip). So if you want 3rd page of results with page size = 10, you need to pass $top = 10 and $skip=20. Open the BingSearchContainer.cs in the editor. You can see the Web method in it as follows. public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options) {  In the method signature, I have added two more parameters public DataServiceQuery<WebResult> Web(String Query, String Market, String Adult, Double? Latitude, Double? Longitude, String WebFileType, String Options, int resultCount, int pageNo) { and in the method, you need to pass the parameters to the query variable. query = query.AddQueryOption("$top", resultCount); query = query.AddQueryOption("$skip", (pageNo -1)*resultCount); return query; Note that I didn’t perform any validation, but you need to check conditions such as resultCount and pageCount should be greater than or equal to 1. If the parameters are not valid, the Bing Search API will throw the error. The modified method is as follows. The changes are highlighted. Now see the following code in the SearchPage.aspx.cs file protected void btnSearch_Click(object sender, EventArgs e) {     var bingContainer = new Bing.BingSearchContainer(new Uri(https://api.datamarket.azure.com/Bing/SearchWeb/));     // replace this value with your account key     var accountKey = "your key";     // the next line configures the bingContainer to use your credentials.     bingContainer.Credentials = new NetworkCredential(accountKey, accountKey);     var webResults = bingContainer.Web("site:microsoft.com" +txtSearch.Text , null, null, null, null, null, null,3,2);     lstResults.DataSource = webResults;     lstResults.DataBind(); } The following code will return 3 results starting from second page (by skipping first 3 results). See the result page as follows. Bing provides complete integration to its offerings. When you develop search based applications, you can use the power of Bing to perform the search. Integrating Bing Search API to ASP.Net application is a simple process and without investing much time, you can develop a good search based application. Make sure you read the terms of use before designing the application and decide which API usage is suitable for you. Further readings BING API Migration Guide http://go.microsoft.com/fwlink/?LinkID=248077 Bing API FAQ http://go.microsoft.com/fwlink/?LinkID=252146 Bing API Schema Guide http://go.microsoft.com/fwlink/?LinkID=252151

  Read the article

• What popular "best practices" are not always best, and why?

  - by SnOrfus

  "Best practices" are everywhere in our industry. A Google search on "coding best practices" turns up nearly 1.5 million results. The idea seems to bring comfort to many; just follow the instructions, and everything will turn out fine. When I read about a best practice - for example, I just read through several in Clean Code recently - I get nervous. Does this mean that I should always use this practice? Are there conditions attached? Are there situations where it might not be a good practice? How can I know for sure until I've learned more about the problem? Several of the practices mentioned in Clean Code did not sit right with me, but I'm honestly not sure if that's because they're potentially bad, or if that's just my personal bias talking. I do know that many prominent people in the tech industry seem to think that there are no best practices, so at least my nagging doubts place me in good company. The number of best practices I've read about are simply too numerous to list here or ask individual questions about, so I would like to phrase this as a general question: Which coding practices that are popularly labeled as "best practices" can be sub-optimal or even harmful under certain circumstances? What are those circumstances and why do they make the practice a poor one? I would prefer to hear about specific examples and experiences.

  Read the article

• Entity Framework version 1- Brief Synopsis and Tips &ndash; Part 1

  - by Rohit Gupta

  To Do Eager loading use Projections (for e.g. from c in context.Contacts select c, c.Addresses)  or use Include Query Builder Methods (Include(“Addresses”)) If there is multi-level hierarchical Data then to eager load all the relationships use Include Query Builder methods like customers.Include("Order.OrderDetail") to include Order and OrderDetail collections or use customers.Include("Order.OrderDetail.Location") to include all Order, OrderDetail and location collections with a single include statement =========================================================================== If the query uses Joins then Include() Query Builder method will be ignored, use Nested Queries instead If the query does projections then Include() Query Builder method will be ignored Use Address.ContactReference.Load() OR Contact.Addresses.Load() if you need to Deferred Load Specific Entity – This will result in extra round trips to the database ObjectQuery<> cannot return anonymous types... it will return a ObjectQuery<DBDataRecord> Only Include method can be added to Linq Query Methods Any Linq Query method can be added to Query Builder methods. If you need to append a Query Builder Method (other than Include) after a LINQ method  then cast the IQueryable<Contact> to ObjectQuery<Contact> and then append the Query Builder method to it =========================================================================== Query Builder methods are Select, Where, Include Methods which use Entity SQL as parameters e.g. "it.StartDate, it.EndDate" When Query Builder methods do projection then they return ObjectQuery<DBDataRecord>, thus to iterate over this collection use contact.Item[“Name”].ToString() When Linq To Entities methods do projection, they return collection of anonymous types --- thus the collection is strongly typed and supports Intellisense EF Object Context can track changes only on Entities, not on Anonymous types. If you use a Defining Query for a EntitySet then the EntitySet becomes readonly since a Defining Query is the same as a View (which is treated as a ReadOnly by default). However if you want to use this EntitySet for insert/update/deletes then we need to map stored procs (as created in the DB) to the insert/update/delete functions of the Entity in the Designer You can use either Execute method or ToList() method to bind data to datasources/bindingsources If you use the Execute Method then remember that you can traverse through the ObjectResult<> collection (returned by Execute) only ONCE. In WPF use ObservableCollection to bind to data sources , for keeping track of changes and letting EF send updates to the DB automatically. Use Extension Methods to add logic to Entities. For e.g. create extension methods for the EntityObject class. Create a method in ObjectContext Partial class and pass the entity as a parameter, then call this method as desired from within each entity. ================================================================ DefiningQueries and Stored Procedures: For Custom Entities, one can use DefiningQuery or Stored Procedures. Thus the Custom Entity Collection will be populated using the DefiningQuery (of the EntitySet) or the Sproc. If you use Sproc to populate the EntityCollection then the query execution is immediate and this execution happens on the Server side and any filters applied will be applied in the Client App. If we use a DefiningQuery then these queries are composable, meaning the filters (if applied to the entityset) will all be sent together as a single query to the DB, returning only filtered results. If the sproc returns results that cannot be mapped to existing entity, then we first create the Entity/EntitySet in the CSDL using Designer, then create a dummy Entity/EntitySet using XML in the SSDL. When creating a EntitySet in the SSDL for this dummy entity, use a TSQL that does not return any results, but does return the relevant columns e.g. select ContactID, FirstName, LastName from dbo.Contact where 1=2 Also insure that the Entity created in the SSDL uses the SQL DataTypes and not .NET DataTypes. If you are unable to open the EDMX file in the designer then note the Errors ... they will give precise info on what is wrong. The Thrid option is to simply create a Native Query in the SSDL using <Function Name="PaymentsforContact" IsComposable="false">   <CommandText>SELECT ActivityId, Activity AS ActivityName, ImagePath, Category FROM dbo.Activities </CommandText></FuncTion> Then map this Function to a existing Entity. This is a quick way to get a custom Entity which is regular Entity with renamed columns or additional columns (which are computed columns). The disadvantage to using this is that It will return all the rows from the Defining query and any filter (if defined) will be applied only at the Client side (after getting all the rows from DB). If you you DefiningQuery instead then we can use that as a Composable Query. The Fourth option (for mapping a READ stored proc results to a non-existent Entity) is to create a View in the Database which returns all the fields that the sproc also returns, then update the Model so that the model contains this View as a Entity. Then map the Read Sproc to this View Entity. The other option would be to simply create the View and remove the sproc altogether. ================================================================ To Execute a SProc that does not return a entity, use a EntityCommand to execute that proc. You cannot call a sproc FunctionImport that does not return Entities From Code, the only way is to use SSDL function calls using EntityCommand.  This changes with EntityFramework Version 4 where you can return Scalar Types, Complex Types, Entities or NonQuery ================================================================ UDF when created as a Function in SSDL, we need to set the Name & IsComposable properties for the Function element. IsComposable is always false for Sprocs, for UDF's set this to true. You cannot call UDF "Function" from within code since you cannot import a UDF Function into the CSDL Model (with Version 1 of EF). only stored procedures can be imported and then mapped to a entity ================================================================ Entity Framework requires properties that are involved in association mappings to be mapped in all of the function mappings for the entity (Insert, Update and Delete). Because Payment has an association to Reservation... hence we need to pass both the paymentId and reservationId to the Delete sproc even though just the paymentId is the PK on the Payment Table. ================================================================ When mapping insert, update and delete procs to a Entity, insure that all the three or none are mapped. Further if you have a base class and derived class in the CSDL, then you must map (ins, upd, del) sprocs to all parent and child entities in the inheritance relationship. Note that this limitation that base and derived entity methods must all must be mapped does not apply when you are mapping Read Stored Procedures.... ================================================================ You can write stored procedures SQL directly into the SSDL by creating a Function element in the SSDL and then once created, you can map this Function to a CSDL Entity directly in the designer during Function Import ================================================================ You can do Entity Splitting such that One Entity maps to multiple tables in the DB. For e.g. the Customer Entity currently derives from Contact Entity...in addition it also references the ContactPersonalInfo Entity. One can copy all properties from the ContactPersonalInfo Entity into the Customer Entity and then Delete the CustomerPersonalInfo entity, finall one needs to map the copied properties to the ContactPersonalInfo Table in Table Mapping (by adding another table (ContactPersonalInfo) to the Table Mapping... this is called Entity Splitting. Thus now when you insert a Customer record, it will automatically create SQL to insert records into the Contact, Customers and ContactPersonalInfo tables even though you have a Single Entity called Customer in the CSDL =================================================================== There is Table by Type Inheritance where another EDM Entity can derive from another EDM entity and absorb the inherted entities properties, for example in the Break Away Geek Adventures EDM, the Customer entity derives (inherits) from the Contact Entity and absorbs all the properties of Contact entity. Thus when you create a Customer Entity in Code and then call context.SaveChanges the Object Context will first create the TSQL to insert into the Contact Table followed by a TSQL to insert into the Customer table =================================================================== Then there is the Table per Hierarchy Inheritance..... where different types are created based on a condition (similar applying a condition to filter a Entity to contain filtered records)... the diference being that the filter condition populates a new Entity Type (derived from the base Entity). In the BreakAway sample the example is Lodging Entity which is a Abstract Entity and Then Resort and NonResort Entities which derive from Lodging Entity and records are filtered based on the value of the Resort Boolean field =================================================================== Then there is Table per Concrete Type Hierarchy where we create a concrete Entity for each table in the database. In the BreakAway sample there is a entity for the Reservation table and another Entity for the OldReservation table even though both the table contain the same number of fields. The OldReservation Entity can then inherit from the Reservation Entity and configure the OldReservation Entity to remove all Scalar Properties from the Entity (since it inherits the properties from Reservation and filters based on ReservationDate field) =================================================================== Complex Types (Complex Properties) Entities in EF can also contain Complex Properties (in addition to Scalar Properties) and these Complex Properties reference a ComplexType (not a EntityType) DropdownList, ListBox, RadioButtonList, CheckboxList, Bulletedlist are examples of List server controls (not data bound controls) these controls cannot use Complex properties during databinding, they need Scalar Properties. So if a Entity contains Complex properties and you need to bind those to list server controls then use projections to return Scalar properties and bind them to the control (the disadvantage is that projected collections are not tracked by the Object Context and hence cannot persist changes to the projected collections bound to controls) ObjectDataSource and EntityDataSource do account for Complex properties and one can bind entities with Complex Properties to Data Source controls and they will be tracked for changes... with no additional plumbing needed to persist changes to these collections bound to controls So DataBound controls like GridView, FormView need to use EntityDataSource or ObjectDataSource as a datasource for entities that contain Complex properties so that changes to the datasource done using the GridView can be persisted to the DB (enabling the controls for updates)....if you cannot use the EntityDataSource you need to flatten the ComplexType Properties using projections With EF Version 4 ComplexTypes are supported by the Designer and can add/remove/compose Complex Types directly using the Designer =================================================================== Conditional Mapping ... is like Table per Hierarchy Inheritance where Entities inherit from a base class and then used conditions to populate the EntitySet (called conditional Mapping). Conditional Mapping has limitations since you can only use =, is null and IS NOT NULL Conditions to do conditional mapping. If you need more operators for filtering/mapping conditionally then use QueryView(or possibly Defining Query) to create a readonly entity. QueryView are readonly by default... the EntitySet created by the QueryView is enabled for change tracking by the ObjectContext, however the ObjectContext cannot create insert/update/delete TSQL statements for these Entities when SaveChanges is called since it is QueryView. One way to get around this limitation is to map stored procedures for the insert/update/delete operations in the Designer. =================================================================== Difference between QueryView and Defining Query : QueryView is defined in the (MSL) Mapping File/section of the EDM XML, whereas the DefiningQuery is defined in the store schema (SSDL). QueryView is written using Entity SQL and is this database agnostic and can be used against any database/Data Layer. DefiningQuery is written using Database Lanaguage i.e. TSQL or PSQL thus you have more control =================================================================== Performance: Lazy loading is deferred loading done automatically. lazy loading is supported with EF version4 and is on by default. If you need to turn it off then use context.ContextOptions.lazyLoadingEnabled = false To improve Performance consider PreCompiling the ObjectQuery using the CompiledQuery.Compile method

  Read the article

• URL Parts available to URL Rewrite Rules

  - by OWScott

  URL Rewrite is a powerful URL rewriting tool available for IIS7 and newer.  Your rewriting options are almost unlimited, giving you the ability to optimize URLs for search engine optimization (SEO), support multiple domain names on a single site, hiding complex paths and much more. URL Rewrite allows you to use any Server Variable as conditions, and with URL Rewrite 2.0, you can also update them on the fly.  To see all variables available to your site, see this post. An understanding of the parts of a complete URL are essential to working with URL Rewrite, so I’ll include the basics here.  Ruslan Yakushev’s configuration reference was my authoritative source for this. Take this URL for example: The URL is http://www.bing.com/search?q=IIS+url+rewrite The parts of the URL are: http(s)://<host>:<port>/<path>?<querystring> Part Example Server Variable http(s) http SERVER_PORT_SECURE or HTTPS = on/off <host> www.bing.com HTTP_HOST <port> Default is 80 SERVER_PORT <path> search The rule pattern in URL Rewrite <path> /search PATH_INFO <querystring> q=IIS+url+rewrite QUERY_STRING entire URL path with querystring /search?q=IIS+url+rewrite REQUEST_URI It’s important to note that /, : and ? aren’t included in some of the server variables. Understanding which slashes are included is important to creating successful rules.

  Read the article

• Option Trading: Getting the most out of the event session options

  - by extended_events

  You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• How bad is it to use display: none in CSS?

  - by Andy

  I've heard many times that it's bad to use display: none for SEO reasons, as it could be an attempt to push in irrelevant popular keywords. A few questions: Is that still received wisdom? Does it make a difference if you're only hiding a single word, or perhaps a single character? If you should avoid any use of it, what are the preferred techniques for hiding (in situations where you need it to become visible again on certain conditions)? Some references I've found so far: Matt Cutts from 2005 in a comment If you're straight-out using CSS to hide text, don't be surprised if that is called spam. I'm not saying that mouseovers or DHTML text or have-a-logo-but-also-have-text is spam; I answered that last one at a conference when I said "imagine how it would look to a visitor, a competitor, or someone checking out a spam report. If you show your company's name and it's Expo Markers instead of an Expo Markers logo, you should be fine. If the text you decide to show is 'Expo Markers cheap online discount buy online Expo Markers sale ...' then I would be more cautious, because that can look bad." And in another comment on the same article We can flag text that appears to be hidden using CSS at Google. To date we have not algorithmically removed sites for doing that. We try hard to avoid throwing babies out with bathwater. (My emphasis) Eric Enge said in 2008 The legitimate use of this technique is so prevalent that I would rarely expect search engines to penalize a site for using the display: none attribute. It’s just very difficult to implement an algorithm that could truly ferret out whether the particular use of display: none is meant to deceive the search engines or not. Thanks in advance, Andy

  Read the article

• Seeking htaccess help: Converting multiple subdomains (both http and https) to www.domain.com using .htaccess

  - by Joshua Dorkin

  I've been trying to get an answer to this question on other forums (the folks at SuperUser thought this was the place I needed to post) and via my connections, but I haven't gotten very far. Hopefully you guys can help me find an answer: I've got a dozen old subdomains that have been indexed by Google. These have been indexed as both http AND https. I've managed to redirect all the subdomains properly, provided they are not https, but can't get any of the https subdomains to property redirect. Here's the code I'm using: RewriteCond %{HTTP_HOST} ^subdomain1.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain2.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] RewriteCond %{HTTP_HOST} ^subdomain3.mysite.com$ [NC] RewriteRule ^(.*)$ http://www.mysite.com/$1 [R=301,L] This works great until someone goes to: https://subdomain2.mysite.com$ which is not redirected back to http://www.mysite.com$ How can I get this to work? Additionally, I'm guessing there is an easier way to make it happen than setting up a dozen pairs of Rewrite conditions/rewrite rule? Is there any way to do this in just a few lines, including one where I list all the subdomains? I'd actually also like to redirect everything on https://www.mysite.com$ to http://www.mysite.com$ except for 3 folders These are mysite.com/secure, mysite.com/store, mysite.com/user -- is there any good way to add this to the htaccess file? Any suggestions would be great! Thank you in advance for any help.

  Read the article

• Automated unit testing, integration testing or acceptance testing

  - by bjarkef

  TDD and unit testing seems to be the big rave at the moment. But it is really that useful compared to other forms of automated testing? Intuitively I would guess that automated integration testing is way more useful than unit testing. In my experience the most bugs seems to be in the interaction between modules, and not so much the actual (usual limited) logic of each unit. Also regressions often happened because of changing interfaces between modules (and changed pre and post-conditions.) Am I misunderstanding something, or why are unit testing getting so much focus compared to integration testing? It is simply because it is assumed that integration testing is something you have, and unit testing is the next thing we need to learn to apply as developers? Or maybe unit testing simply yields the highest gain compared to the complexity of automating it? What are you experience with automated unit testing, automated integration testing, and automated acceptance testing, and in your experience what has yielded the highest ROI? and why? If you had to pick just one form of testing to be automated on your next project, which would it be? Thanks in advance.

  Read the article

• Option Trading: Getting the most out of the event session options

  - by extended_events

  You can control different aspects of how an event session behaves by setting the event session options as part of the CREATE EVENT SESSION DDL. The default settings for the event session options are designed to handle most of the common event collection situations so I generally recommend that you just use the defaults. Like everything in the real world though, there are going to be a handful of “special cases” that require something different. This post focuses on identifying the special cases and the correct use of the options to accommodate those cases. There is a reason it’s called Default The default session options specify a total event buffer size of 4 MB with a 30 second latency. Translating this into human terms; this means that our default behavior is that the system will start processing events from the event buffer when we reach about 1.3 MB of events or after 30 seconds, which ever comes first. Aside: What’s up with the 1.3 MB, I thought you said the buffer was 4 MB?The Extended Events engine takes the total buffer size specified by MAX_MEMORY (4MB by default) and divides it into 3 equally sized buffers. This is done so that a session can be publishing events to one buffer while other buffers are being processed. There are always at least three buffers; how to get more than three is covered later. Using this configuration, the Extended Events engine can “keep up” with most event sessions on standard workloads. Why is this? The fact is that most events are small, really small; on the order of a couple hundred bytes. Even when you start considering events that carry dynamically sized data (eg. binary, text, etc.) or adding actions that collect additional data, the total size of the event is still likely to be pretty small. This means that each buffer can likely hold thousands of events before it has to be processed. When the event buffers are finally processed there is an economy of scale achieved since most targets support bulk processing of the events so they are processed at the buffer level rather than the individual event level. When all this is working together it’s more likely that a full buffer will be processed and put back into the ready queue before the remaining buffers (remember, there are at least three) are full. I know what you’re going to say: “My server is exceptional! My workload is so massive it defies categorization!” OK, maybe you weren’t going to say that exactly, but you were probably thinking it. The point is that there are situations that won’t be covered by the Default, but that’s a good place to start and this post assumes you’ve started there so that you have something to look at in order to determine if you do have a special case that needs different settings. So let’s get to the special cases… What event just fired?! How about now?! Now?! If you believe the commercial adage from Heinz Ketchup (Heinz Slow Good Ketchup ad on You Tube), some things are worth the wait. This is not a belief held by most DBAs, particularly DBAs who are looking for an answer to a troubleshooting question fast. If you’re one of these anxious DBAs, or maybe just a Program Manager doing a demo, then 30 seconds might be longer than you’re comfortable waiting. If you find yourself in this situation then consider changing the MAX_DISPATCH_LATENCY option for your event session. This option will force the event buffers to be processed based on your time schedule. This option only makes sense for the asynchronous targets since those are the ones where we allow events to build up in the event buffer – if you’re using one of the synchronous targets this option isn’t relevant. Avoid forgotten events by increasing your memory Have you ever had one of those days where you keep forgetting things? That can happen in Extended Events too; we call it dropped events. In order to optimizes for server performance and help ensure that the Extended Events doesn’t block the server if to drop events that can’t be published to a buffer because the buffer is full. You can determine if events are being dropped from a session by querying the dm_xe_sessions DMV and looking at the dropped_event_count field. Aside: Should you care if you’re dropping events?Maybe not – think about why you’re collecting data in the first place and whether you’re really going to miss a few dropped events. For example, if you’re collecting query duration stats over thousands of executions of a query it won’t make a huge difference to miss a couple executions. Use your best judgment. If you find that your session is dropping events it means that the event buffer is not large enough to handle the volume of events that are being published. There are two ways to address this problem. First, you could collect fewer events – examine you session to see if you are over collecting. Do you need all the actions you’ve specified? Could you apply a predicate to be more specific about when you fire the event? Assuming the session is defined correctly, the next option is to change the MAX_MEMORY option to a larger number. Picking the right event buffer size might take some trial and error, but a good place to start is with the number of dropped events compared to the number you’ve collected. Aside: There are three different behaviors for dropping events that you specify using the EVENT_RETENTION_MODE option. The default is to allow single event loss and you should stick with this setting since it is the best choice for keeping the impact on server performance low.You’ll be tempted to use the setting to not lose any events (NO_EVENT_LOSS) – resist this urge since it can result in blocking on the server. If you’re worried that you’re losing events you should be increasing your event buffer memory as described in this section. Some events are too big to fail A less common reason for dropping an event is when an event is so large that it can’t fit into the event buffer. Even though most events are going to be small, you might find a condition that occasionally generates a very large event. You can determine if your session is dropping large events by looking at the dm_xe_sessions DMV once again, this time check the largest_event_dropped_size. If this value is larger than the size of your event buffer [remember, the size of your event buffer, by default, is max_memory / 3] then you need a large event buffer. To specify a large event buffer you set the MAX_EVENT_SIZE option to a value large enough to fit the largest event dropped based on data from the DMV. When you set this option the Extended Events engine will create two buffers of this size to accommodate these large events. As an added bonus (no extra charge) the large event buffer will also be used to store normal events in the cases where the normal event buffers are all full and waiting to be processed. (Note: This is just a side-effect, not the intended use. If you’re dropping many normal events then you should increase your normal event buffer size.) Partitioning: moving your events to a sub-division Earlier I alluded to the fact that you can configure your event session to use more than the standard three event buffers – this is called partitioning and is controlled by the MEMORY_PARTITION_MODE option. The result of setting this option is fairly easy to explain, but knowing when to use it is a bit more art than science. First the science… You can configure partitioning in three ways: None, Per NUMA Node & Per CPU. This specifies the location where sets of event buffers are created with fairly obvious implication. There are rules we follow for sub-dividing the total memory (specified by MAX_MEMORY) between all the event buffers that are specific to the mode used: None: 3 buffers (fixed)Node: 3 * number_of_nodesCPU: 2.5 * number_of_cpus Here are some examples of what this means for different Node/CPU counts: Configuration None Node CPU 2 CPUs, 1 Node 3 buffers 3 buffers 5 buffers 6 CPUs, 2 Node 3 buffers 6 buffers 15 buffers 40 CPUs, 5 Nodes 3 buffers 15 buffers 100 buffers   Aside: Buffer size on multi-processor computersAs the number of Nodes or CPUs increases, the size of the event buffer gets smaller because the total memory is sub-divided into more pieces. The defaults will hold up to this for a while since each buffer set is holding events only from the Node or CPU that it is associated with, but at some point the buffers will get too small and you’ll either see events being dropped or you’ll get an error when you create your session because you’re below the minimum buffer size. Increase the MAX_MEMORY setting to an appropriate number for the configuration. The most likely reason to start partitioning is going to be related to performance. If you notice that running an event session is impacting the performance of your server beyond a reasonably expected level [Yes, there is a reasonably expected level of work required to collect events.] then partitioning might be an answer. Before you partition you might want to check a few other things: Is your event retention set to NO_EVENT_LOSS and causing blocking? (I told you not to do this.) Consider changing your event loss mode or increasing memory. Are you over collecting and causing more work than necessary? Consider adding predicates to events or removing unnecessary events and actions from your session. Are you writing the file target to the same slow disk that you use for TempDB and your other high activity databases? <kidding> <not really> It’s always worth considering the end to end picture – if you’re writing events to a file you can be impacted by I/O, network; all the usual stuff. Assuming you’ve ruled out the obvious (and not so obvious) issues, there are performance conditions that will be addressed by partitioning. For example, it’s possible to have a successful event session (eg. no dropped events) but still see a performance impact because you have many CPUs all attempting to write to the same free buffer and having to wait in line to finish their work. This is a case where partitioning would relieve the contention between the different CPUs and likely reduce the performance impact cause by the event session. There is no DMV you can check to find these conditions – sorry – that’s where the art comes in. This is  largely a matter of experimentation. On the bright side you probably won’t need to to worry about this level of detail all that often. The performance impact of Extended Events is significantly lower than what you may be used to with SQL Trace. You will likely only care about the impact if you are trying to set up a long running event session that will be part of your everyday workload – sessions used for short term troubleshooting will likely fall into the “reasonably expected impact” category. Hey buddy – I think you forgot something OK, there are two options I didn’t cover: STARTUP_STATE & TRACK_CAUSALITY. If you want your event sessions to start automatically when the server starts, set the STARTUP_STATE option to ON. (Now there is only one option I didn’t cover.) I’m going to leave causality for another post since it’s not really related to session behavior, it’s more about event analysis. - Mike Share this post: email it! | bookmark it! | digg it! | reddit! | kick it! | live it!

  Read the article

• Entity is currently read-only

  - by George Evjen

  Quick post on an issue that we were having today. This fix may just be a band-aid for another issue but this fix at least got us moving again today. Since I didn’t see anything concrete online for a solution I figured I would post this as a part one fix and then post a more detailed fix later. We were getting this error earlier today in one of our projects that uses EF and WCF Ria Services. This entity is currently read-only. One of the following conditions exist: a custom method has been invoked, a submit operation is in progress, or edit operations are not supported for the entity type. The work around that we used for this is to simply do a check to see if the property is read only. Each entity has that property on it. private void SelectedInstitution_PropertyChanged(object sender, System.ComponentModel.PropertyChangedEventArgs e)        {            if (!_personDetailContext.CurrentPerson.IsReadOnly)            {                _personDetailContext.CurrentPerson.LastUpdatedDate = DateTime.Now;            }        } We check to see if the CurrentPerson in this situation is readonly. If its not read only we go ahead and execute some other code. Again, this got us moving today, I am sure this is just step one in resolving this issue.

  Read the article

• Are `break` and `continue` bad programming practices?

  - by Mikhail

  My boss keeps mentioning nonchalantly that bad programmers use break and continue in loops. I use them all the time because they make sense; let me show you the inspiration: function verify(object) { if (object->value < 0) return false; if (object->value > object->max_value) return false; if (object->name == "") return false; ... } The point here is that first the function checks that the conditions are correct, then executes the actual functionality. IMO same applies with loops: while (primary_condition) { if (loop_count > 1000) break; if (time_exect > 3600) break; if (this->data == "undefined") continue; if (this->skip == true) continue; ... } I think this makes it easier to read & debug; but I also don't see a downside. Please comment.

  Read the article

• ArchBeat Top 20 for March 11-17, 2012

  - by Bob Rhubart

  The 20 most-clicked links as shared via my social networks for the week of March 11-17, 2012. Start Small, Grow Fast: SOA Best Practices article by @biemond, @rluttikhuizen, @demed Packt Publishing offers discounts of up to 30% on 60+ Oracle titles IT Strategies from Oracle; Three Recipes for Oracle Service Bus 11g ; Stir Up Some SOA Oracle Cloud Conference: dates and locations worldwide Applications Architecture | Roy Hunter and Brian Rasmussen How Strategic is IT? - Assessing Strategic Value | Al Kiessel White Paper: An Architect’s Guide to Big Data | Dr. Helen Sun, Peter Heller Getting Started with Oracle Unbreakable Enterprise Kernel Release 2 | Lenz Grimmer Great Solaris 10 features paving the way to Solaris 11 | Karoly Vegh Who the Linux Developer Met on His Way to St. Ives | Rick Ramsey Peripheral Responsibilities Required for Large IDM Build Outs (Including Fusion Apps) | Brian Eidelman IOUG Real World Performance Tour, w/Tom Kyte, Andrew Holdsworth, Graham Wood Configure IPoIB on Solaris 10 branded zone | Leo Yuen Oracle OpenWorld 2012 Call for Papers Use Case Assumptions versus Pre-Conditions | Dave Burke Handling Custom XML documents in Oracle B2B | @Biemond Building a Coherence Cluster with Multiple Application Servers | Rene van Wijk XMLA vs BAPI | Sunil S. Ranka The Java EE 6 Example - Running Galleria on WebLogic 12 - Part 3 | @MyFear Public Sector Architecture | @jeremy_forman, @hamzajahangir Thought for the Day "The goal of Computer Science is to build something that will last at least until we've finished building it." —Anonymous

  Read the article

• Don’t miss the Oracle Webcast: Enabling Effective Decision Making with “One Source of the Truth” at BB&T

  - by Rob Reynolds

  Webcast Date:  September 17th, 2012  -  9 a.m. PT / 12 p.m. ET  BB&T Corporation (NYSE: BBT) is one of the largest financial services holding companies in the United States. One of their IT goals is to provide “one source of truth” to enable more effective decision making at the corporate and local level. By using Oracle’s Hyperion Enterprise Planning Suite and Oracle Essbase, BB&T streamlined their planning and financial reporting processes. Large volumes of data were consolidated into a single reporting solution giving stakeholders more timely and accurate information. By providing a central and automated collaboration tool, BB&T is able to prepare more accurate financial forecasts, rapidly consolidate large amounts of data, and make more informed decisions. Join us on September 17th for a live webcast to hear BB&T’s journey to achieve “One Source of Truth” and learn how Oracle’s Hyperion Planning Suite and Oracle’s Essbase allows you to: Adopt best practices like rolling forecasts and driver-based planning Reduce the time and effort dedicated to the annual budget process Reduce the time and effort dedicated to the annual budget process Remove forecasting uncertainty with predictive modeling capabilities Rapidly analyze shifting market conditions with a powerful calculation engine Prioritize resources effectively with complete visibility into all potential risks Link strategy and execution with integrated strategic, financial and operational planning Register here.

  Read the article

• Ignoring Robots - Or Better Yet, Counting Them Separately

  - by [email protected]

  It is quite common to have web sessions that are undesirable from the point of view of analytics. For example, when there are either internal or external robots that check the site's health, index it or just extract information from it. These robotic session do not behave like humans and if their volume is high enough they can sway the statistics and models.One easy way to deal with these sessions is to define a partitioning variable for all the models that is a flag indicating whether the session is "Normal" or "Robot". Then all the reports and the predictions can use the "Normal" partition, while the counts and statistics for Robots are still available.In order for this to work, though, it is necessary to have two conditions:1. It is possible to identify the Robotic sessions.2. No learning happens before the identification of the session as a robot.The first point is obvious, but the second may require some explanation. While the default in RTD is to learn at the end of the session, it is possible to learn in any entry point. This is a setting for each model. There are various reasons to learn in a specific entry point, for example if there is a desire to capture exactly and precisely the data in the session at the time the event happened as opposed to including changes to the end of the session.In any case, if RTD has already learned on the session before the identification of a robot was done there is no way to retract this learning.Identifying the robotic sessions can be done through the use of rules and heuristics. For example we may use some of the following:Maintain a list of known robotic IPs or domainsDetect very long sessions, lasting more than a few hours or visiting more than 500 pagesDetect "robotic" behaviors like a methodic click on all the link of every pageDetect a session with 10 pages clicked at exactly 20 second intervalsDetect extensive non-linear navigationNow, an interesting experiment would be to use the flag above as an output of a model to see if there are more subtle characteristics of robots such that a model can be used to detect robots, even if they fall through the cracks of rules and heuristics.In any case, the basic and simple technique of partitioning the models by the type of session is simple to implement and provides a lot of advantages.

  Read the article

• No endpoint listening at.........

  - by Michael Stephenson

  I was having some very frustrating behaviour on our build server and while I found a number of articles online with similar error messages none of them helped me.  I thought I would just explain this here incase if helps me or anyone else in future.The error message we were getting is:There was no endpoint listening at http://localhostStubs.ExternalApplication/SampleService.svc that could accept the message. This is often caused by an incorrect address or SOAP action. See InnerException, if present, for more detailsOur scenario is as follows:We have a solution where a WCF service application hosting the WCF routing service is listening to the Windows Azure Service Bus Relay.  We have an acceptance test project in the solution which sends a message to the service bus which is then received by the WCF routing service and routed to SampleService.svc which is hosted in another IIS application on the same box.  A response is flowed back through to the test.  In the tests there are 5 scenarios simulating a successful message, and various error conditions.  On my developer machine it was working absolutely fine every time, and a clean build on my developer machine worked fine.  On the build server however one or more of the tests would fail each time with the above error message.  There didnt seem to be any pattern to which test would fail.The solution was building on a Windows 2008 R2 machine with IIS 7 and AppFabric Server installed with auto-start configured for the IIS Application which would be listening to service bus.After lots of searching online and looking at logs etc it turned out to be a simple solution to just restart the WAS service (Windows Process Activation Service) and the services it advised you to restart with it.  Hope this helps someone else

  Read the article

• Differentiate procedural language(c) from oop languages(c++)

  - by niko

  I have been trying to differentiate c and c++(or oop languages) but I don't understand where the difference is. Note I have never used c++ but I asked my friends and some of them to differentiate c and c++ They say c++ has oop concepts and also the public, private modes for definition of variables and which c does not have though. Seriously I have done vb.net programming for a while 2 to 3 months, I never faced a situation to use class concepts and modes of definition like public and private. So I thought what could be the use for these? My friend explained me a program saying that if a variable is public, it can be accessed anywhere I said why not declare it as a global variable like in c? He did not get back to my question and he said if a variable is private it cannot be accessed by some other functions I said why not define it as a local variable, even these he was unable to answer. No matter where I read private variables cannot be accessed whereas public variables can be then why not make public as global and private as local whats the difference? whats the real use of public and private ? please don't say it can be used by everyone, I suppose why not we use some conditions and make the calls? I have heard people saying security reasons, a friend said if a function need to be accessed it should be inherited first. He explained saying that only admin should be able to have some rights and not all so that functions are made private and inherited only by the admin to use Then I said why not we use if condition if ( login == "admin") invoke the function he still did not answer these question. Please clear me with these things, I have done vb.net and vba and little c++ without using oop concepts because I never found their real use while I was writing the code, I'm a little afraid am I too back in oop concepts?

  Read the article

• Mission critical embedded language

  - by Moe

  Maybe the question sounds a bit strange, so i'll explain a the background a little bit. Currently i'm working on a project at y university, which will be a complete on-board software for an satellite. The system is programmed in c++ on top of a real-time operating system. However, some subsystems like the attitude control system and the fault detection and a space simulation are currently only implemented in Matlab/Simulink, to prototype the algorithms efficiently. After their verification, they will be translated into c++. The complete on-board software grew very complex, and only a handful people know the whole system. Furthermore, many of the students haven't program in c++ yet and the manual memory management of c++ makes it even more difficult to write mission critical software. Of course the main system has to be implemented in c++, but i asked myself if it's maybe possible to use an embedded language to implement the subsystem which are currently written in Matlab. This embedded language should feature: static/strong typing and compiler checks to minimize runtime errors small memory usage, and relative fast runtime attitude control algorithms are mainly numerical computations, so a good numeric support would be nice maybe some sort of functional programming feature, matlab/simulink encourage you to use it too I googled a bit, but only found Lua. It looks nice, but i would not use it in mission critical software. Have you ever encountered a situation like this, or do you know any language, which could satisfies the conditions? EDIT: To clarify some things: embedded means it should be able to embed the language into the existing c++ environment. So no compiled languages like Ada or Haskell ;)

  Read the article

• How do I make complex SQL queries easier to write?

  - by DragonLord

  I'm finding it very difficult to write complex SQL queries involving joins across many (at least 3-4) tables and involving several nested conditions. The queries I'm being asked to write are easily described by a few sentences, but can require a deceptive amount of code to complete. I'm finding myself often using temporary views to write these queries, which seem like a bit of a crutch. What tips can you provide that I can use to make these complex queries easier? More specifically, how do I break these queries down into the steps I need to use to actually write the SQL code? Note that I'm the SQL I'm being asked to write is part of homework assignments for a database course, so I don't want software that will do the work for me. I want to actually understand the code I'm writing. More technical details: The database is hosted on a PostgreSQL server running on the local machine. The database is very small: there are no more than seven tables and the largest table has less than about 50 rows. The SQL queries are being passed unchanged to the server, via LibreOffice Base.

  Read the article

• FIX: Visual Studio Post Build Event Returns &ndash;1 when it should not.

  - by ChrisD

  I had written a Console Application that I run as part of my post build for other projects..  The Console application logs a series of messages to the console as it executes.  I use the Environment.ExitCode value to specify an error or success condition.  When the application executes without issue, the ExitCode is 0, when there is a problem its –1. As part of my logging, I log the value of the exit code right before the application terminates.  When I run this executable from the command line, it behaves as it should; error scenarios return –1 and success scenarios return 0.   When I run the same command line as part of the post-build event, Visual Studio reports the exit code as –1, even when the application reports the exit code as 0.   A snippet of the build output follows: Verbose: Exiting with ExitCode=0 C:\Windows\Microsoft.NET\Framework\v3.5\Microsoft.Common.targets(3397,13): error MSB3073: The command ""MGC.exe" "-TargetPath=C:\TFS\Solutions\Research\Source\Framework\Services\Identity\STS\_STSBuilder\bin\Debug\_STSBuilder.dll" C:\Windows\Microsoft.NET\Framework\v3.5\Microsoft.Common.targets(3397,13): error MSB3073:  C:\Windows\Microsoft.NET\Framework\v3.5\Microsoft.Common.targets(3397,13): error MSB3073: " exited with code -1. The Application returns a 0 exit code.  But visual studio is reporting an error.  Why? The answer is in the way I format my log messages.  Apparently Visual Studio watches the messages that get streamed to the the output console.  If those messages match a pattern used by visual studio to communicate errors, Visual Studio assumes an error has occurred in the executable and returns a –1.  This post details the formats used by Visual Studio to determine error conditions. In my case, the presence of the colon was tripping up Visual studio.  I Replaced all occurrences of colon with an equal sign and Visual Studio once again respected the exit code of the application. Verbose= Exiting with ExitCode=0 ========== Build: 3 succeeded or up-to-date, 0 failed, 0 skipped ==========

  Read the article

• Formalizing a requirements spec written in narrative English

  - by ProfK

  I have a fairly technical functionality requirements spec, expressed in English prose, produced by my project manager. It is structured as a collection of UI tabs, where the requirements for each tab are expressed as a lit of UI fields and a list of business rules for the tab. Most business rules are for UI fields on a tab, e.g: a) Must be alphanumeric, max length 20. b) Must be a dropdown, with values from table x. c) Is mandatory. d) Is mandatory under certain conditions, e.g. another field is just populated, or has a specific value. Then other business rules get a little more complex. The spec is for a job application, so the central business object (table) is the Applicant, and we have several other tables with one-to-many relationships with applicant, such as Degree, HighSchool, PreviousEmployer, Diploma, etc. e) One such complex rule says a status field can only be assigned a certain value if a many-side record exists in at least one of the many-side tables. E.g. the Applicant has at least one HighSchool or at least one Diploma record. I am looking for advice on how to codify these requirements into a more structured specification defined in terms of tables, fields, and relationships, especially for the conditional rules for fields and for the presence of related records. Any suggestions and advice will be most welcome, but I would be overjoyed if i could find an already defined system or structure for expressing things like this.

  Read the article

• DIVIDE vs division operator in #dax

  - by Marco Russo (SQLBI)

  Alberto Ferrari wrote an interesting article about DIVIDE performance in DAX. This new function has been introduced in SQL Server Analysis Services 2012 SP1, so it is available also in Excel 2013 (which still doesn’t have other features/fixes introduced by following Cumulative Updates…). The idea that instead of writing: IF ( Sales[Quantity] <> 0, Sales[Amount] / Sales[Quantity], BLANK () ) you can write: DIVIDE ( Sales[Amount], Sales[Quantity] ) There is a third optional argument in DIVIDE that defines the result in case the denominator (second argument) is zero, and by default its value is BLANK, so I omitted the third argument in my example. Using DIVIDE is very important, especially when you use a measure in MDX (for example in an Excel PivotTable) because it raise the chance that the non empty evaluation for the result is evaluated in bulk mode instead of cell-by-cell. However, from a DAX point of view, you might find it’s better to use the standard division operator removing the IF statement. I suggest you to read Alberto’s article, because you will find that an expression applying a filter using FILTER is faster than using CALCULATE, which is against any rule of thumb you might have read until now! Again, this is not always true, and depends on many conditions – trying to simplify, we might say that for a simple calculation, the query plan generated by FILTER could be more efficient – but, as usual, it depends, and 90% of the times using FILTER instead of CALCULATE produces slower performance. Do not take anything for granted, and always check the query plan when performance are your first issue!

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >