Search Results

Search found 2466 results on 99 pages for 'dave hinton'.

Page 43/99 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • MS Project - Schedule short duration tasks that stay within working hrs

    - by Dave Warwick
    I am planning a series of tests that take a couple of hours each. However, you can not split a test so I do not want the next test to begin if there is not enough time within the specified working hours of the day to complete it. Also, I would like to begin each day with a set-up period before the actual testing can begin. Is there a way to automatically begin each day with a setup period and have tasks that can not complete before the end of the specified work day defer starting until the next day?

    Read the article

  • Compaq 610 fan is constantly on and noisy, base is fairly hot too

    - by Dave
    The fans on both of my HP Compaq 610s are constantly on and the base is fairly hot and I don't know if this is standard issue. HP assures me that this is unusual and that I should return them as DOA. Because both laptops have this problem, I'm thinking that this might be a design flaw rather than a one-off problem. I've updated the BIOS and using their recommended power settings. Am I missing something? Is there anything I can do to fix it?

    Read the article

  • Citrix Secure Gateway not redirecting to login URL

    - by Dave
    We have an older setup for XenApp - users log in through Citrix Secure Gateway running on a windows box. (We hope to start using a NetScaler soon.) Earlier today, connections to https://citrix.company.com/ starting throwing up a 503 error page, instead of redirecting to https://citrix.company.com/Citrix/XenApp/ If you go directly to the /Citrix/Xenapp/ URL, the user is properly directed to the login page, and can launch apps. We've restarted the service, and rebooted the server. We haven't yet tried uninstalling and reinstalling the software. Before we do this, I'm looking for ideas as to how we can get the redirect working again without a fairly major outage window. To make things more interesting, many of our users have Citrix Receiver installed, also pointed at https://citrix.company.com/. Receiver makes itself the default launcher for ICA files, and gives a connection error when it tries to load apps - probably because of the same non-functional rediect?

    Read the article

  • Audio card with built-in ground isolator?

    - by Dave Jarvis
    What audio cards would you recommend that eliminate hum, and hard-drive & mouse movement signal interference? Hardware components: Motherboard. Asus P5Q SE Audio. Realtek ALC 1200, 8-Channel High-Definition Audio CODEC (on board) Harddrive. WD Caviar 320 GB Mouse. Logitech Marbleman USB Mixer. Mackie d.4 Pro Amplifier. Sonance Sonamp 260 All components are plugged into the same Monster Power HDP 910 powerbar (does not help eliminate noise). I have no other components plugged in. The computer uses a Monster iCable 1000 to go from mini (on board audio) to RCA (mixer). I have moved the cable as far from other cables as possible. A ground loop isolator between the mixer and on board audio eliminates all noise. I would rather not use a ground loop isolator; an internal audio card that is Linux-compatible (Kubuntu) would be ideal. Suggestions?

    Read the article

  • How do I disable Tomcat? [closed]

    - by Dave King Popeye Mason
    Possible Duplicate: How to disable Tomcat on linux? According to my server host, something called Tomcat is hogging all my resources and slowing down the server. As far as I'm aware I'm not using it as the only thing running on the server is Plesk and a few Wordpress installations. I'm a real dummy at using SSH, I can navigate to folders, change permissions and that's about it. Could somebody explain to me as if I'm a 5 year old how to disable TomCat (and also how to stop it re-enabling on startup)? Thanks!

    Read the article

  • nameservers one domain one VPS and one VMCloud

    - by Dave
    I 'had' just a single VPS with nameservers ns1 & ns2.mydomain.com. I've now taken a VMCloud package as I need space etc. Ultimately I will carefully transfer all accounts from my VPS to Cloud but in the short term I'm running both. In the new WHM on Cloud I have set hostname bla.domian nameservers as ns3 & ns4.mydomain.com with the two new ip addresses. Question is do I need to do anything else - eg where mydomain.com is registered? I want ns1 & 2 point to VPS and ns3 & 4 to point to Cloud.

    Read the article

  • Embedding a WMV file on the web via URL in a Powerpoint presentation

    - by Dave
    I've got a situation where I want to distribute a Powerpoint presentation to several people. I want to be able to embed several large videos in this presentation by linking to a URL, for the following specific reasons: the videos are highly confidential, and I would like to be able to delete them at some later date, but still allow them to see it in the presentation while it is online. I want to send the presentation via email (so it should be small), and put the links on a server with a faster upload speed Maybe I'd like to change the video at some point without changing the presentation One option that addresses #1 is to hook up a webcam and allow them to see video stream from the office, but our upload rate is too slow for this to be a viable option. I've tried embedding a video and giving Powerpoint the URL. It seems to work initially, because the first frame appears in my slideshow. However, when I play the slideshow, nothing happens. I looked at the network traffic on my computer, and nothing was getting downloaded from the remote server. Any suggestions on how to make this work, or how to at least satisfy the criteria listed above would be great!

    Read the article

  • Dell D620 Windows 7 Blank screen

    - by Dave Arkell
    When I installed Windows 7 on my Dell D620 it was all fine until a couple of days later most times when I either shut down or suspend (by closing the lid). When I unsuspend or startup the computer, there is often a completely blank screen (can't see post screen or anything), and restarting doesn't help. I've found that I can eventually bring it back up again by suspending and unsuspending a few times, but obviously this is not ideal. Has anyone else experienced this? I think it is a driver issue, that somehow the driver is putting the video card into a certain mode that it forgets how to get it back out of. Any ideas on a better solution than my switching off and on business? Edit: Turns out that the video card had burned out! IT managed to get me a new mainboard sorted for me.

    Read the article

  • What type of VPS stats should I look for?

    - by Dave
    I have a few websites that average a total of 10,000 uniques a day across my network. I also have a few mobile apps that pull xml data maybe 5,000 calls a day. My sites aren't anything major just a few wallpaper websites and few other small sites, nothing real database intensive. I currently own a dedicated server and I feel like it's overkill for my network. I'm looking into getting a Virtual Private Server (VPS). I was just wondering what kind of stats I should be looking for to support my network of sites. Thanks

    Read the article

  • How can I replace email alerts for system events with something more scalable?

    - by Dave Forgac
    I have a number of systems and services that send email alerts when some sort of event takes place. This works fine for a small number of systems but as the number of alerts grows the important message become less visible among the informational notices. Email filtering can only be effective to a point. What sort of solution can I use in place of emails that will allow me to send arbitrary alerts from various services and that will scale easily as the number of services grows?

    Read the article

  • Monitor ASP.NET Session State Variables

    - by Dave Johnson
    We are running a number of ASP.NET applications on W2K3 Server and IIS 6.0, and are looking for a way to be able to monitor ASP.NET session state variables (InProc) that are stored in memory. We are thinking there may be some memory optimization opportunities with some of these session state variables potentially consuming large amounts of RAM. Is there a way to accomplish this through IIS or Windows rather than instrumenting all of the individual Web apps with code to monitor the session state variables?

    Read the article

  • How do you change your Airport or Ethernet MAC address in Mac OS X 10.6?

    - by Dave Gallagher
    I have a MacBook Pro and would like to set a custom MAC address for either my Airport WiFi card, or Ethernet port. In older versions of Mac OS X, you could do it like this: $ sudo ifconfig en0 ether 00:11:22:33:44:55 // Ethernet $ sudo ifconfig en1 lladdr AA:BB:CC:DD:EE:FF // Airport For it to work on Airport, you'd have to power it on (e.g. $ sudo ifconfig en1 up), ensure it's not connected to any wireless network, and execute the command. I'm aware such a change won't propagate across reboots. Unfortunately, this doesn't work on Mac OS X 10.6.6 anymore. Apple appears to have removed the functionality (the command fails silently). Does anyone have any idea how to do it? Thanks for any help you can offer! :)

    Read the article

  • Internet connection sharing between Windows XP and Windows 7

    - by Dave
    I bought my lil sister's netbooks for Christmas and I've been having a heck of a time trying to get Internet Connection Sharing to work. The host computer is a Windows XP box and it uses a US Cellular 3G modem dongle thingy to set it's Internet access. Additionally I have a hard wire plugged into the LAN1 port of the router described below. (I tried the WAN port out of desperation but things didn't seem happy that way.) Additionally they have a linksys router (can't remember specific model number, I will find this out) that I was using to take advantage of it's wireless capabilities. Originally thought about updating the router to use dd-wrt, but after reading the instructions it looked like to much of a pita (had to downgrade firmware, then install dd-wrt) to set up, eventually I caved, out of desperation, and ended up successfully installing dd-wrt on the router. I have DHCP turned off on the router, actually all I could select was DHCP forwarder. The netbooks both have windows 7 starter installed on them. Initially, I had the networks joined to a homegroup but I dropped that and everyone is able to see everyone in their respective network explorers. When I turn on Internet Connection Sharing on the host, its IP on the LAN changed to 192.168.0.1, so I arbitrarily decided to assign the router to port 192.168.0.100. When I connect the netbooks they get IPs dynamically. As I stated before, everyone can see everyone in the network explorer, and shares can be accessed. The weird thing is that everyone can ping the router but they cannot ping each others IPs. The status on the netbooks says that there is no Internet Connectivity. Another thing I tried was manually setting the DNS servers on the netbooks to the DNS servers that the host computer has. The funny thing is when I ping an outside domain such as google.com the IP address resolves, however I get no responses from the pings. When I tried plugging the host into the WAN port I could ping the router, nor could I access the router's web access admin. Another thing I tried was turning off the firewall on the netbooks and the firewall off on the host computer for the LAN connection, and they still could not ping each other. Also I thought I should be able to start a remote desktop connection but I couldn't do that either, I also checked to make sure that computers would in fact accept a request for remote desktop connections.

    Read the article

  • Create Google Maps screenshots at regular intervals

    - by Dave Jarvis
    Background People are concerned that building a pipeline to the West Coast of Canada will increase the number of oil tankers, thus increasing the probability of a major oil spill, thereby creating an environmental catastrophe. The AIS Live Ships Map website captures real-time Marine Traffic updates using a Google Maps interface. While it is possible to obtain data from an AIS data feed, often the feeds are either pay-for-use, or otherwise encumbered with license restrictions. Problem The AIS Live Ships website presents a map in the browser: The map above has had its location interactively changed to focus on the area in question: the northern straight of Vancouver Island. Question How would you create a service that captures the map every 30 minutes and that could run, with neither user-intervention nor a significant memory footprint, for a few years? Idea #1 Create a virtual machine. Install and run a light-weight browser. Use Shutter to take captures at regular intervals. Idea #2 Use Python's Ghost Webkit to automate the captures. Thank you!

    Read the article

  • Windows Remote-App Server 2012 Office 2013 User Settings not saved

    - by dave
    I have a Windows Server 2012 with RemoteApps enabled. It's running the latest Patches etc. It has Office 2013 installed and Excel and Word are shared to all users. Now I got the Problem that after each Reboot all User Settings are lost. I have a few users who pin previously opened Documents so they dont need to remember all Paths and those are all gone after Reboot. Also last opened Documents is empty and after a Server reboot it brings the office 2013 Window for First time setup where it asks if you want to connect to skydrive and all that. In the RemoteApps Collection I enabled a Userprofile-Drive 100GB drive E: for Storing User profile data. There is a Domain of course and there is no GPO Preventing the user from Storing settings etc. We also got an older Terminal Server 2003 in the same Domain where this is not happening. Any ideas why this is happening that all the Settings are lost after Reboot?

    Read the article

  • Automate Excel Text Import Wizard?

    - by Dave Mackey
    I receive files on occasion in a fixed width format. I need to import them into Excel but Excel doesn't perfectly pick up the columns. I can do it manually each time with the Text Import Wizard, but I'm wondering if there is a way to create a "text import template" or something similar - since these files are always the same format.

    Read the article

  • Hardware asset management systems

    - by Dave
    I need to track a bunch of specialized testing tools, They are hardware devices used for testing other equipement. Each device has a serial number and is sent out for use in testing. Occasionally they break and have to be sent to the manufacture for repair. I'm looking for an open source application (preferably a webapp) to help manage them. Right now we're using Excel and it's not scaling as we get more tools. They aren't computers so all the standard IT asset management systems don't really fit the bill. I found h-harmony, but that project seems dead?

    Read the article

  • Prepare bootable Mac OS install usb on Windows

    - by Dave
    Hello, Is there any software out there that can simulate Disk Utility (Mac app) for Windows? I need to reinstall leopard on my Mac because I screwed something up on the current OS. The thing is, the DVD drive is broken on there, so I need to prepare a bootable USB drive from my Leopard DMG file. This is easily done with the Disk Utility app on the Mac. But seeing how my cannot even log on to my Mac right now, I don't know how to prepare that USB stick. The only other machine I have is a PC with Windows 7. If anyone has any suggestion, please help me out! Thanks so much!

    Read the article

  • Adding a virtual directory IIS 7.5 Windows 7 Ultimate x64

    - by Dave
    Trying to get my IIS 7.5 playing nice with VS 2008 on Windows 7 Ultimate 64-bit. I'm getting this error: System.Security.SecurityException: Request for the permission of type 'System.Web.AspNetHostingPermission, System, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b77a5c561934e089' failed. This happens when accessing a virtual directory outside C:\inetpub\wwwroot. I'd like to be able to create virtual directories outside the root if I can. I've added the NETWORK SERVICE to the folder hosting the virtual directory, still no luck. This folder is on my C: drive, not a share. TIA

    Read the article

  • Disconnect VPN Using the Command Line

    - by Dave Johnson
    I make VPN connections using Vista's Connection Manager, and would like to disconnect the VPN connection from the command line so I can create a shortcut command called vpn.disconnect in Promptu Launcher. How can I disconnect the VPN connection via the command line?

    Read the article

  • eSATA hard drive falls asleep, takes ages to wake up.

    - by Dave Van den Eynde
    I'm using an external hard drive, a Western Digital MyBook 1TB of some sort with eSATA on an eSATA II ExpressCard adapter from Belkin on Windows Vista 32-bit. The issue I'm having is that after a while power management kicks in and puts the hard drive to sleep. When I resume my work and browse the drive, for example, the Explorer hangs and while I can still use my other apps, it takes a couple minutes for it to realize it should wake up the drive and recommence work. What's going on?

    Read the article

  • Trouble editing ~/.bash_profile: -bash: $'\r': command not found

    - by Dave
    I installed CygWin on Windows 7. Using Notepad, I edited my ~/.bash_profile file to add on to the PATH variable … PATH="${PATH}:/cygdrive/c/apache-ant-1.8.2/bin" Now, when I SSH in to my Windows machine, I get this error … -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: $'\r': command not found -bash: /home/dev/.bash_profile: line 39: syntax error: unexpected end of file and my PATH is not set. Anyone know how I can correct this?

    Read the article

  • Corporate Wiki Organization - Technical Documentation

    - by Dave Jarvis
    Corporations have documents describing various aspects of their technical systems, including: Custom Applications Custom Development Frameworks Third Party Applications Accounting Bug Tracking Network Management How To Guides User Manuals Software Tools Web Browsers Development IDEs Graphics GIMP xv Text Editing File Transfer ncFTP WinSCP Hardware Servers Web Database Exchange File Network Devices Printers If you had to use a Wiki to manage the documentation, what other items would you add to the list, and how would you organize it? (For example, would Software Tools make more sense under Third Party Applications?) A few constraints: The structure should not go beyond three levels deep. Avoid the word "and" in favour of two different categories. Keep the structure general: it should appy as broadly as possible. Target audience is primarily technical, but could be visible by anyone.

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >