Search Results

Search found 4316 results on 173 pages for 'disabled'.

Page 43/173 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • How to Reuse Your Old Wi-Fi Router as a Network Switch

    - by Jason Fitzpatrick
    Just because your old Wi-Fi router has been replaced by a newer model doesn’t mean it needs to gather dust in the closet. Read on as we show you how to take an old and underpowered Wi-Fi router and turn it into a respectable network switch (saving your $20 in the process). Image by mmgallan. Why Do I Want To Do This? Wi-Fi technology has changed significantly in the last ten years but Ethernet-based networking has changed very little. As such, a Wi-Fi router with 2006-era guts is lagging significantly behind current Wi-Fi router technology, but the Ethernet networking component of the device is just as useful as ever; aside from potentially being only 100Mbs instead of 1000Mbs capable (which for 99% of home applications is irrelevant) Ethernet is Ethernet. What does this matter to you, the consumer? It means that even though your old router doesn’t hack it for your Wi-Fi needs any longer the device is still a perfectly serviceable (and high quality) network switch. When do you need a network switch? Any time you want to share an Ethernet cable among multiple devices, you need a switch. For example, let’s say you have a single Ethernet wall jack behind your entertainment center. Unfortunately you have four devices that you want to link to your local network via hardline including your smart HDTV, DVR, Xbox, and a little Raspberry Pi running XBMC. Instead of spending $20-30 to purchase a brand new switch of comparable build quality to your old Wi-Fi router it makes financial sense (and is environmentally friendly) to invest five minutes of your time tweaking the settings on the old router to turn it from a Wi-Fi access point and routing tool into a network switch–perfect for dropping behind your entertainment center so that your DVR, Xbox, and media center computer can all share an Ethernet connection. What Do I Need? For this tutorial you’ll need a few things, all of which you likely have readily on hand or are free for download. To follow the basic portion of the tutorial, you’ll need the following: 1 Wi-Fi router with Ethernet ports 1 Computer with Ethernet jack 1 Ethernet cable For the advanced tutorial you’ll need all of those things, plus: 1 copy of DD-WRT firmware for your Wi-Fi router We’re conducting the experiment with a Linksys WRT54GL Wi-Fi router. The WRT54 series is one of the best selling Wi-Fi router series of all time and there’s a good chance a significant number of readers have one (or more) of them stuffed in an office closet. Even if you don’t have one of the WRT54 series routers, however, the principles we’re outlining here apply to all Wi-Fi routers; as long as your router administration panel allows the necessary changes you can follow right along with us. A quick note on the difference between the basic and advanced versions of this tutorial before we proceed. Your typical Wi-Fi router has 5 Ethernet ports on the back: 1 labeled “Internet”, “WAN”, or a variation thereof and intended to be connected to your DSL/Cable modem, and 4 labeled 1-4 intended to connect Ethernet devices like computers, printers, and game consoles directly to the Wi-Fi router. When you convert a Wi-Fi router to a switch, in most situations, you’ll lose two port as the “Internet” port cannot be used as a normal switch port and one of the switch ports becomes the input port for the Ethernet cable linking the switch to the main network. This means, referencing the diagram above, you’d lose the WAN port and LAN port 1, but retain LAN ports 2, 3, and 4 for use. If you only need to switch for 2-3 devices this may be satisfactory. However, for those of you that would prefer a more traditional switch setup where there is a dedicated WAN port and the rest of the ports are accessible, you’ll need to flash a third-party router firmware like the powerful DD-WRT onto your device. Doing so opens up the router to a greater degree of modification and allows you to assign the previously reserved WAN port to the switch, thus opening up LAN ports 1-4. Even if you don’t intend to use that extra port, DD-WRT offers you so many more options that it’s worth the extra few steps. Preparing Your Router for Life as a Switch Before we jump right in to shutting down the Wi-Fi functionality and repurposing your device as a network switch, there are a few important prep steps to attend to. First, you want to reset the router (if you just flashed a new firmware to your router, skip this step). Following the reset procedures for your particular router or go with what is known as the “Peacock Method” wherein you hold down the reset button for thirty seconds, unplug the router and wait (while still holding the reset button) for thirty seconds, and then plug it in while, again, continuing to hold down the rest button. Over the life of a router there are a variety of changes made, big and small, so it’s best to wipe them all back to the factory default before repurposing the router as a switch. Second, after resetting, we need to change the IP address of the device on the local network to an address which does not directly conflict with the new router. The typical default IP address for a home router is 192.168.1.1; if you ever need to get back into the administration panel of the router-turned-switch to check on things or make changes it will be a real hassle if the IP address of the device conflicts with the new home router. The simplest way to deal with this is to assign an address close to the actual router address but outside the range of addresses that your router will assign via the DHCP client; a good pick then is 192.168.1.2. Once the router is reset (or re-flashed) and has been assigned a new IP address, it’s time to configure it as a switch. Basic Router to Switch Configuration If you don’t want to (or need to) flash new firmware onto your device to open up that extra port, this is the section of the tutorial for you: we’ll cover how to take a stock router, our previously mentioned WRT54 series Linksys, and convert it to a switch. Hook the Wi-Fi router up to the network via one of the LAN ports (consider the WAN port as good as dead from this point forward, unless you start using the router in its traditional function again or later flash a more advanced firmware to the device, the port is officially retired at this point). Open the administration control panel via  web browser on a connected computer. Before we get started two things: first,  anything we don’t explicitly instruct you to change should be left in the default factory-reset setting as you find it, and two, change the settings in the order we list them as some settings can’t be changed after certain features are disabled. To start, let’s navigate to Setup ->Basic Setup. Here you need to change the following things: Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable Save with the “Save Settings” button and then navigate to Setup -> Advanced Routing: Operating Mode: Router This particular setting is very counterintuitive. The “Operating Mode” toggle tells the device whether or not it should enable the Network Address Translation (NAT)  feature. Because we’re turning a smart piece of networking hardware into a relatively dumb one, we don’t need this feature so we switch from Gateway mode (NAT on) to Router mode (NAT off). Our next stop is Wireless -> Basic Wireless Settings: Wireless SSID Broadcast: Disable Wireless Network Mode: Disabled After disabling the wireless we’re going to, again, do something counterintuitive. Navigate to Wireless -> Wireless Security and set the following parameters: Security Mode: WPA2 Personal WPA Algorithms: TKIP+AES WPA Shared Key: [select some random string of letters, numbers, and symbols like JF#d$di!Hdgio890] Now you may be asking yourself, why on Earth are we setting a rather secure Wi-Fi configuration on a Wi-Fi router we’re not going to use as a Wi-Fi node? On the off chance that something strange happens after, say, a power outage when your router-turned-switch cycles on and off a bunch of times and the Wi-Fi functionality is activated we don’t want to be running the Wi-Fi node wide open and granting unfettered access to your network. While the chances of this are next-to-nonexistent, it takes only a few seconds to apply the security measure so there’s little reason not to. Save your changes and navigate to Security ->Firewall. Uncheck everything but Filter Multicast Firewall Protect: Disable At this point you can save your changes again, review the changes you’ve made to ensure they all stuck, and then deploy your “new” switch wherever it is needed. Advanced Router to Switch Configuration For the advanced configuration, you’ll need a copy of DD-WRT installed on your router. Although doing so is an extra few steps, it gives you a lot more control over the process and liberates an extra port on the device. Hook the Wi-Fi router up to the network via one of the LAN ports (later you can switch the cable to the WAN port). Open the administration control panel via web browser on the connected computer. Navigate to the Setup -> Basic Setup tab to get started. In the Basic Setup tab, ensure the following settings are adjusted. The setting changes are not optional and are required to turn the Wi-Fi router into a switch. WAN Connection Type: Disabled Local IP Address: [different than the primary router, e.g. 192.168.1.2] Subnet Mask: [same as the primary router, e.g. 255.255.255.0] DHCP Server: Disable In addition to disabling the DHCP server, also uncheck all the DNSMasq boxes as the bottom of the DHCP sub-menu. If you want to activate the extra port (and why wouldn’t you), in the WAN port section: Assign WAN Port to Switch [X] At this point the router has become a switch and you have access to the WAN port so the LAN ports are all free. Since we’re already in the control panel, however, we might as well flip a few optional toggles that further lock down the switch and prevent something odd from happening. The optional settings are arranged via the menu you find them in. Remember to save your settings with the save button before moving onto a new tab. While still in the Setup -> Basic Setup menu, change the following: Gateway/Local DNS : [IP address of primary router, e.g. 192.168.1.1] NTP Client : Disable The next step is to turn off the radio completely (which not only kills the Wi-Fi but actually powers the physical radio chip off). Navigate to Wireless -> Advanced Settings -> Radio Time Restrictions: Radio Scheduling: Enable Select “Always Off” There’s no need to create a potential security problem by leaving the Wi-Fi radio on, the above toggle turns it completely off. Under Services -> Services: DNSMasq : Disable ttraff Daemon : Disable Under the Security -> Firewall tab, uncheck every box except “Filter Multicast”, as seen in the screenshot above, and then disable SPI Firewall. Once you’re done here save and move on to the Administration tab. Under Administration -> Management:  Info Site Password Protection : Enable Info Site MAC Masking : Disable CRON : Disable 802.1x : Disable Routing : Disable After this final round of tweaks, save and then apply your settings. Your router has now been, strategically, dumbed down enough to plod along as a very dependable little switch. Time to stuff it behind your desk or entertainment center and streamline your cabling.     

    Read the article

  • CodePlex Daily Summary for Monday, December 03, 2012

    CodePlex Daily Summary for Monday, December 03, 2012Popular Releasesmenu4web: menu4web 1.1 - free javascript menu: menu4web 1.1 has been tested with all major browsers: Firefox, Chrome, IE, Opera and Safari. Minified m4w.js library is less than 9K. Includes 22 menu examples of different styles. Can be freely distributed under The MIT License (MIT).Quest: Quest 5.3 Beta: New features in Quest 5.3 include: Grid-based map (sponsored by Phillip Zolla) Changable POV (sponsored by Phillip Zolla) Game log (sponsored by Phillip Zolla) Customisable object link colour (sponsored by Phillip Zolla) More room description options (by James Gregory) More mathematical functions now available to expressions Desktop Player uses the same UI as WebPlayer - this will make it much easier to implement customisation options New sorting functions: ObjectListSort(list,...Mi-DevEnv: Development 0.1: First Drop This is the first drop of files now placed under source control. Today the system ran end to end, creating a virtual machine and installing multiple products without a single prompt or key press being required. This is a snapshot of the first release. All files are under source control. Assumes Hyper-V under Server 2012 or Windows 8, using Windows Management Framework with PowerShell 3.Chinook Database: Chinook Database 1.4: Chinook Database 1.4 This is a sample database available in multiple formats: SQL scripts for multiple database vendors, embeded database files, and XML format. The Chinook data model is available here. ChinookDatabase1.4_CompleteVersion.zip is a complete package for all supported databases/data sources. There are also packages for each specific data source. Supported Database ServersDB2 EffiProz MySQL Oracle PostgreSQL SQL Server SQL Server Compact SQLite Issues Resolved293...RiP-Ripper & PG-Ripper: RiP-Ripper 2.9.34: changes FIXED: Thanks Function when "Download each post in it's own folder" is disabled FIXED: "PixHub.eu" linksCleverBobCat: CleverBobCat 1.1.2: Changes: - Control loss of cart when decoupled fixed - Some problems with energy transfer usage if disabled system fixedD3 Loot Tracker: 1.5.6: Updated to work with D3 version 1.0.6.13300DirectQ: DirectQ II 2012-11-29: A (slightly) modernized port of Quake II to D3D9. You need SM3 or better hardware to run this - if you don't have it, then don't even bother. It should work on Windows Vista, 7 or 8; it may also work on XP but I haven't tested. Known bugs include: Some mods may not work. This is unfortunately due to the nature of Quake II's game DLLs; sometimes a recompile of the game DLL is all that's needed. In any event, ensure that the game DLL is compatible with the last release of Quake II first (...Magelia WebStore Open-source Ecommerce software: Magelia WebStore 2.2: new UI for the Administration console Bugs fixes and improvement version 2.2.215.3JayData - The cross-platform HTML5 data-management library for JavaScript: JayData 1.2.5: What's new in JayData 1.2.5For detailed release notes check the release notes. Handlebars template engine supportImplement data manager applications with JayData using Handlebars.js for templating. Include JayDataModules/handlebars.js and begin typing the mustaches :) Blogpost: Handlebars templates in JayData Handlebars helpers and model driven commanding in JayData Easy JayStorm cloud data managementManage cloud data using the same syntax and data management concept just like any other data ...nopCommerce. Open source shopping cart (ASP.NET MVC): nopcommerce 2.70: Highlight features & improvements: • Performance optimization. • Search engine optimization. ID-less URLs for products, categories, and manufacturers. • Added ACL support (access control list) on products and categories. • Minify and bundle JavaScript files. • Allow a store owner to decide which billing/shipping address fields are enabled/disabled/required (like it's already done for the registration page). • Moved to MVC 4 (.NET 4.5 is required). • Now Visual Studio 2012 is required to work ...SQL Server Partition Management: Partition Management Release 3.0: Release 3.0 adds support for SQL Server 2012 and is backward compatible with SQL Server 2008 and 2005. The release consists of: • A Readme file • The Executable • The source code (Visual Studio project) Enhancements include: -- Support for Columnstore indexes in SQL Server 2012 -- Ability to create TSQL scripts for staging table and index creation operations -- Full support for global date and time formats, locale independent -- Support for binary partitioning column types -- Fixes to is...NHook - A debugger API: NHook 1.0: x86 debugger Resolve symbol from MS Public server Resolve RVA from executable's image Add breakpoints Assemble / Disassemble target process assembly More information here, you can also check unit tests that are real sample code.PDF Library: PDFLib v2.0: Release notes This new version include many bug fixes and include support for stream objects and cross-reference object streams. New FeatureExtract images from the PDFDocument.Editor: 2013.5: Whats new for Document.Editor 2013.5: New Read-only File support New Check For Updates support Minor Bug Fix's, improvements and speed upsMCEBuddy 2.x: MCEBuddy 2.3.10: Critical Update to 2.3.9: Changelog for 2.3.10 (32bit and 64bit) 1. AsfBin executable missing from build 2. Removed extra references from build to avoid conflict 3. Showanalyzer installation now checked on remote engine machine Changelog for 2.3.9 (32bit and 64bit) 1. Added support for WTV output profile 2. Added support for minimizing MCEBuddy to the system tray 3. Added support for custom archive folder 4. Added support to disable subdirectory monitoring 5. Added support for better TS fil...DotNetNuke® Community Edition CMS: 07.00.00: Major Highlights Fixed issue that caused profiles of deleted users to be available Removed the postback after checkboxes are selected in Page Settings > Taxonomy Implemented the functionality required to edit security role names and social group names Fixed JavaScript error when using a ";" semicolon as a profile property Fixed issue when using DateTime properties in profiles Fixed viewstate error when using Facebook authentication in conjunction with "require valid profile fo...CODE Framework: 4.0.21128.0: See change notes in the documentation section for details on what's new.Microsoft Ajax Minifier: Microsoft Ajax Minifier 4.76: Fixed a typo in ObjectLiteralProperty.IsConstant that caused all object literals to be treated like they were constants, and possibly moved around in the code when they shouldn't be.Kooboo CMS: Kooboo CMS 3.3.0: New features: Dropdown/Radio/Checkbox Lists no longer references the userkey. Instead they refer to the UUID field for input value. You can now delete, export, import content from database in the site settings. Labels can now be imported and exported. You can now set the required password strength and maximum number of incorrect login attempts. Child sites can inherit plugins from its parent sites. The view parameter can be changed through the page_context.current value. Addition of c...New ProjectsASP.NET Youtube Clone: ASP.NET Youtube Clone is a complete script with basic and advance features which allow you to build complex social media sharing website in asp.net, c#, vb.net.Assembly - Halo Research Tool: Assembly is a program designed to aid in the development of creative modifications for the Xbox 360 Halo games. It also includes a .NET library for programmers.Async ContentPlaceHolder: Load your ASP.Net content placeholder asynchronously.Automate Microsoft System Center Configuration Manager 2012 with Powershell: Scripts to automate Microsoft System Center 2012 Configuration Manager with PowershellAzMan Contrib: AzMan Contrib aims to provide a better experience when using AzMan with ASP.NET WebForms and ASP.NET MVC.Badhshala Jackpot: Facebook application that features Slotmachine with 3 slots where each slot's position is predicted randomly. Tools Used: ASP.Net MVC 4, SQL Server, csharpsdk BREIN Messaging Infrastructure: This project allows for hiding & encapsulating an (WS based) infrastructure by providing the means for dynamic message routing. The gateway thereby enhances the messaging channels to enforce any amount of policies upon in- and outcoming messages. CricketWorldCup2011Trivia: Simple trivia game written in C# based on the 2011 Cricket World Cup.Flee#: A C# Port of the Flee evaluator. It's an expression evaluator for C# that compiles the expressions into IL code, resulting in very fast and efficient execution.Hamcast for multi station coordination: Amateur Radio multiple station operation tends to have loggers and operators striving to get particular information from each other, like what IP address and so forth, so I write this small multicast utility to help them. Supports N1MM and other popular loggers.LDAP/AD Claim Provider For SharePoint 2010: This claim provider implements search on LDAP and AD for SAML authentication (claims mode) in SharePoint 2010MicroData Parser: This library is preliminary implementation of the HTML5 MicroData specification, in C#.PCC.Framework: NET???????????ResumeSharp: ResumeSharp is a resume building tool designed to help keep your resume up-to-date easily. Additionally, you can quickly generate targeted resumes on the fly. It's developed in C#.Sharepoint SPConstant generator: This utility creates a hierarchally representation of a WSS 3.0 / MOSS 2007 Site Collection and generates a C# Source Code File (SPConstant.cs) with a nested structure of structs with static const string fields. This enables you to do the following: SPList list = web.Lists[SPConstant.Lists.Tasklist.Name]; You will then just have to regenerate the SPConstant file (eg. from within VS 2005 or from Command line) to update the name. Description is added to the XML-comments in the generated file ...SoftServe Tasks: a couple of tasks from the 'softserve' courses.Solid Edge Community Extensions: Solid Edge SDKStar Fox XNA Edition: Development of videogames for Microsoft platforms using XNA Game Studio. Remake of the classic videogame Star Fox (1993) for SNES game console.TinySimpleCMS: a tiny and simple cmsUgly Animals: Crossing of Angry Birds and Yeti SportsVIENNA Advantage ERP and CRM: A real cloud based ERP and CRM in C#.Net offering enterprise level functionality for PC, Mac, iPhone, Surface and Android with HTML5 and Silverlight UI.WebSitemap Localizer: WebSitemap Localizer is a utility to auto-convert your Web.sitemap file to support localization.

    Read the article

  • how to change a button into a imagebutton in asp.net c#

    - by sweetsecret
    How to change the button into image button... the button in the beginning has "Pick a date" when clicked a calender pops out and the when a date is selected a label at the bottom reading the date comes in and the text on the button changes to disabled... i want to palce a imagebutton having a image icon of the calender and rest of the function will be the same.... the code as follows: using System; using System.Collections.Generic; using System.ComponentModel; using System.Text; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; [assembly: TagPrefix("DatePicker", "EWS")] namespace EclipseWebSolutions.DatePicker { [DefaultProperty("Text")] [ToolboxData("<{0}:DatePicker runat=server")] [DefaultEvent("SelectionChanged")] [ValidationProperty("TextValue")] public class DatePicker : WebControl, INamingContainer { #region Properties public TextBox txtDate = new TextBox(); public Calendar calDate = new Calendar(); public Button btnDate = new Button(); public Panel pnlCalendar = new Panel(); private enum ViewStateConstants { ValidationGroup, RegularExpression, ErrorMessage, RegExText, CalendarPosition, FormatString, ExpandLabel, CollapseLabel, ApplyDefaultStyle, CausesValidation, } /// <summary> /// Defines the available display modes of this calendar. /// </summary> public enum CalendarDisplay { DisplayRight, DisplayBelow } /// <summary> /// Where to display the popup calendar. /// </summary> [Category("Behaviour")] [Localizable(true)] public CalendarDisplay CalendarPosition { get { if (ViewState[ViewStateConstants.CalendarPosition.ToString()] == null) { ViewState[ViewStateConstants.CalendarPosition.ToString()] = CalendarDisplay.DisplayRight; } return (CalendarDisplay)ViewState[ViewStateConstants.CalendarPosition.ToString()]; } set { ViewState[ViewStateConstants.CalendarPosition.ToString()] = value; } } /// <summary> /// Text version of the control's value, for use by ASP.NET validators. /// </summary> public string TextValue { get { return txtDate.Text; } } /// <summary> /// Holds the current date value of this control. /// </summary> [Category("Behaviour")] [Localizable(true)] [Bindable(true, BindingDirection.TwoWay)] public DateTime DateValue { get { try { if (txtDate.Text == "") return DateTime.MinValue; DateTime val = DateTime.Parse(txtDate.Text); return val; } catch (ArgumentNullException) { return DateTime.MinValue; } catch (FormatException) { return DateTime.MinValue; } } set { if (value == DateTime.MinValue) { txtDate.Text = ""; } else { txtDate.Text = value.ToShortDateString(); } } } [Category("Behavior"), Themeable(false), DefaultValue("")] public virtual string ValidationGroup { get { if (ViewState[ViewStateConstants.ValidationGroup.ToString()] == null) { return string.Empty; } else { return (string)ViewState[ViewStateConstants.ValidationGroup.ToString()]; } } set { ViewState[ViewStateConstants.ValidationGroup.ToString()] = value; } } /// <summary> /// The label of the exand button. Shown when the calendar is hidden. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("PickDate")] [Localizable(true)] public string ExpandButtonLabel { get { String s = (String)ViewState[ViewStateConstants.ExpandLabel.ToString()]; return ((s == null) ? "PickDate" : s); } set { ViewState[ViewStateConstants.ExpandLabel.ToString()] = value; } } /// <summary> /// The label of the collapse button. Shown when the calendar is visible. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("Disabled")] [Localizable(true)] public string CollapseButtonLabel { get { String s = (String)ViewState[ViewStateConstants.CollapseLabel.ToString()]; return ((s == null) ? "Disabled" : s); } set { ViewState[ViewStateConstants.CollapseLabel.ToString()] = value; } } /// <summary> /// Whether to apply the default style. Disable this if you want to apply a custom style, or to use themes and skins /// to style the control. /// </summary> [Category("Appearance")] [DefaultValue(true)] [Localizable(true)] public bool ApplyDefaultStyle { get { if (ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] == null) { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = true; } return (bool)ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()]; } set { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = value; } } /// <summary> /// Causes Validation /// </summary> [Category("Appearance")] [DefaultValue(false)] [Localizable(false)] public bool CausesValidation { get { if (ViewState[ViewStateConstants.CausesValidation.ToString()] == null) { ViewState[ViewStateConstants.CausesValidation.ToString()] = false; } return (bool)ViewState[ViewStateConstants.CausesValidation.ToString()]; } set { ViewState[ViewStateConstants.CausesValidation.ToString()] = value; btnDate.CausesValidation = value; } } #endregion #region Events /// <summary> /// A day was selected from the calendar control. /// </summary> public event EventHandler SelectionChanged; protected virtual void OnSelectionChanged() { if (SelectionChanged != null) // only raise the event if someone is listening. { SelectionChanged(this, EventArgs.Empty); } } #endregion #region Event Handlers /// <summary> /// The +/- button was clicked. /// </summary> protected void btnDate_Click(object sender, System.EventArgs e) { if (!calDate.Visible) { // expand the calendar calDate.Visible = true; txtDate.Enabled = false; btnDate.Text = CollapseButtonLabel; if (DateValue != DateTime.MinValue) { calDate.SelectedDate = DateValue; calDate.VisibleDate = DateValue; } } else { // collapse the calendar calDate.Visible = false; txtDate.Enabled = true; btnDate.Text = ExpandButtonLabel; } } /// <summary> /// A date was selected from the calendar. /// </summary> protected void calDate_SelectionChanged(object sender, System.EventArgs e) { calDate.Visible = false; txtDate.Visible = true; btnDate.Text = ExpandButtonLabel; txtDate.Enabled = true; txtDate.Text = calDate.SelectedDate.ToShortDateString(); OnSelectionChanged(); } #endregion /// <summary> /// Builds the contents of this control. /// </summary> protected override void CreateChildControls() { btnDate.Text = ExpandButtonLabel; btnDate.CausesValidation = CausesValidation; txtDate.ID = "txtDate"; calDate.Visible = false; if (ApplyDefaultStyle) { calDate.BackColor = System.Drawing.Color.White; calDate.BorderColor = System.Drawing.Color.FromArgb(10066329); calDate.CellPadding = 2; calDate.DayNameFormat = DayNameFormat.Shortest; calDate.Font.Name = "Verdana"; calDate.Font.Size = FontUnit.Parse("8pt"); calDate.ForeColor = System.Drawing.Color.Black; calDate.Height = new Unit(150, UnitType.Pixel); calDate.Width = new Unit(180, UnitType.Pixel); calDate.DayHeaderStyle.BackColor = System.Drawing.Color.FromArgb(228, 228, 228); calDate.DayHeaderStyle.Font.Size = FontUnit.Parse("7pt"); calDate.TitleStyle.Font.Bold = true; calDate.WeekendDayStyle.BackColor = System.Drawing.Color.FromArgb(255, 255, 204); } ConnectEventHandlers(); pnlCalendar.Controls.Add(calDate); pnlCalendar.Style["position"] = "absolute"; pnlCalendar.Style["filter"] = "alpha(opacity=95)"; pnlCalendar.Style["-moz-opacity"] = ".95"; pnlCalendar.Style["opacity"] = ".95"; pnlCalendar.Style["z-index"] = "2"; pnlCalendar.Style["background-color"] = "White"; if (CalendarPosition == CalendarDisplay.DisplayBelow) { pnlCalendar.Style["margin-top"] = "27px"; } else { pnlCalendar.Style["display"] = "inline"; } Controls.Add(txtDate); Controls.Add(pnlCalendar); Controls.Add(btnDate); base.CreateChildControls(); } /// <summary> /// Render the contents of this control. /// </summary> /// <param name="output">The HtmlTextWriter to use.</param> protected override void RenderContents(HtmlTextWriter output) { switch (CalendarPosition) { case CalendarDisplay.DisplayRight: { txtDate.RenderControl(output); btnDate.RenderControl(output); pnlCalendar.RenderControl(output); break; } case CalendarDisplay.DisplayBelow: { pnlCalendar.RenderControl(output); txtDate.RenderControl(output); btnDate.RenderControl(output); break; } } } /// <summary> /// Connect event handlers to events. /// </summary> private void ConnectEventHandlers() { btnDate.Click += new System.EventHandler(btnDate_Click); calDate.SelectionChanged += new System.EventHandler(calDate_SelectionChanged); } } } using System; using System.Collections.Generic; using System.ComponentModel; using System.Text; using System.Web; using System.Web.UI; using System.Web.UI.WebControls; [assembly: TagPrefix("DatePicker", "EWS")] namespace EclipseWebSolutions.DatePicker { [DefaultProperty("Text")] [ToolboxData("<{0}:DatePicker runat=server")] [DefaultEvent("SelectionChanged")] [ValidationProperty("TextValue")] public class DatePicker : WebControl, INamingContainer { #region Properties public TextBox txtDate = new TextBox(); public Calendar calDate = new Calendar(); public Button btnDate = new Button(); public Panel pnlCalendar = new Panel(); private enum ViewStateConstants { ValidationGroup, RegularExpression, ErrorMessage, RegExText, CalendarPosition, FormatString, ExpandLabel, CollapseLabel, ApplyDefaultStyle, CausesValidation, } /// <summary> /// Defines the available display modes of this calendar. /// </summary> public enum CalendarDisplay { DisplayRight, DisplayBelow } /// <summary> /// Where to display the popup calendar. /// </summary> [Category("Behaviour")] [Localizable(true)] public CalendarDisplay CalendarPosition { get { if (ViewState[ViewStateConstants.CalendarPosition.ToString()] == null) { ViewState[ViewStateConstants.CalendarPosition.ToString()] = CalendarDisplay.DisplayRight; } return (CalendarDisplay)ViewState[ViewStateConstants.CalendarPosition.ToString()]; } set { ViewState[ViewStateConstants.CalendarPosition.ToString()] = value; } } /// <summary> /// Text version of the control's value, for use by ASP.NET validators. /// </summary> public string TextValue { get { return txtDate.Text; } } /// <summary> /// Holds the current date value of this control. /// </summary> [Category("Behaviour")] [Localizable(true)] [Bindable(true, BindingDirection.TwoWay)] public DateTime DateValue { get { try { if (txtDate.Text == "") return DateTime.MinValue; DateTime val = DateTime.Parse(txtDate.Text); return val; } catch (ArgumentNullException) { return DateTime.MinValue; } catch (FormatException) { return DateTime.MinValue; } } set { if (value == DateTime.MinValue) { txtDate.Text = ""; } else { txtDate.Text = value.ToShortDateString(); } } } [Category("Behavior"), Themeable(false), DefaultValue("")] public virtual string ValidationGroup { get { if (ViewState[ViewStateConstants.ValidationGroup.ToString()] == null) { return string.Empty; } else { return (string)ViewState[ViewStateConstants.ValidationGroup.ToString()]; } } set { ViewState[ViewStateConstants.ValidationGroup.ToString()] = value; } } /// <summary> /// The label of the exand button. Shown when the calendar is hidden. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("PickDate")] [Localizable(true)] public string ExpandButtonLabel { get { String s = (String)ViewState[ViewStateConstants.ExpandLabel.ToString()]; return ((s == null) ? "PickDate" : s); } set { ViewState[ViewStateConstants.ExpandLabel.ToString()] = value; } } /// <summary> /// The label of the collapse button. Shown when the calendar is visible. /// </summary> [Bindable(true)] [Category("Appearance")] [DefaultValue("Disabled")] [Localizable(true)] public string CollapseButtonLabel { get { String s = (String)ViewState[ViewStateConstants.CollapseLabel.ToString()]; return ((s == null) ? "Disabled" : s); } set { ViewState[ViewStateConstants.CollapseLabel.ToString()] = value; } } /// <summary> /// Whether to apply the default style. Disable this if you want to apply a custom style, or to use themes and skins /// to style the control. /// </summary> [Category("Appearance")] [DefaultValue(true)] [Localizable(true)] public bool ApplyDefaultStyle { get { if (ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] == null) { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = true; } return (bool)ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()]; } set { ViewState[ViewStateConstants.ApplyDefaultStyle.ToString()] = value; } } /// <summary> /// Causes Validation /// </summary> [Category("Appearance")] [DefaultValue(false)] [Localizable(false)] public bool CausesValidation { get { if (ViewState[ViewStateConstants.CausesValidation.ToString()] == null) { ViewState[ViewStateConstants.CausesValidation.ToString()] = false; } return (bool)ViewState[ViewStateConstants.CausesValidation.ToString()]; } set { ViewState[ViewStateConstants.CausesValidation.ToString()] = value; btnDate.CausesValidation = value; } } #endregion #region Events /// <summary> /// A day was selected from the calendar control. /// </summary> public event EventHandler SelectionChanged; protected virtual void OnSelectionChanged() { if (SelectionChanged != null) // only raise the event if someone is listening. { SelectionChanged(this, EventArgs.Empty); } } #endregion #region Event Handlers /// <summary> /// The +/- button was clicked. /// </summary> protected void btnDate_Click(object sender, System.EventArgs e) { if (!calDate.Visible) { // expand the calendar calDate.Visible = true; txtDate.Enabled = false; btnDate.Text = CollapseButtonLabel; if (DateValue != DateTime.MinValue) { calDate.SelectedDate = DateValue; calDate.VisibleDate = DateValue; } } else { // collapse the calendar calDate.Visible = false; txtDate.Enabled = true; btnDate.Text = ExpandButtonLabel; } } /// <summary> /// A date was selected from the calendar. /// </summary> protected void calDate_SelectionChanged(object sender, System.EventArgs e) { calDate.Visible = false; txtDate.Visible = true; btnDate.Text = ExpandButtonLabel; txtDate.Enabled = true; txtDate.Text = calDate.SelectedDate.ToShortDateString(); OnSelectionChanged(); } #endregion /// <summary> /// Builds the contents of this control. /// </summary> protected override void CreateChildControls() { btnDate.Text = ExpandButtonLabel; btnDate.CausesValidation = CausesValidation; txtDate.ID = "txtDate"; calDate.Visible = false; if (ApplyDefaultStyle) { calDate.BackColor = System.Drawing.Color.White; calDate.BorderColor = System.Drawing.Color.FromArgb(10066329); calDate.CellPadding = 2; calDate.DayNameFormat = DayNameFormat.Shortest; calDate.Font.Name = "Verdana"; calDate.Font.Size = FontUnit.Parse("8pt"); calDate.ForeColor = System.Drawing.Color.Black; calDate.Height = new Unit(150, UnitType.Pixel); calDate.Width = new Unit(180, UnitType.Pixel); calDate.DayHeaderStyle.BackColor = System.Drawing.Color.FromArgb(228, 228, 228); calDate.DayHeaderStyle.Font.Size = FontUnit.Parse("7pt"); calDate.TitleStyle.Font.Bold = true; calDate.WeekendDayStyle.BackColor = System.Drawing.Color.FromArgb(255, 255, 204); } ConnectEventHandlers(); pnlCalendar.Controls.Add(calDate); pnlCalendar.Style["position"] = "absolute"; pnlCalendar.Style["filter"] = "alpha(opacity=95)"; pnlCalendar.Style["-moz-opacity"] = ".95"; pnlCalendar.Style["opacity"] = ".95"; pnlCalendar.Style["z-index"] = "2"; pnlCalendar.Style["background-color"] = "White"; if (CalendarPosition == CalendarDisplay.DisplayBelow) { pnlCalendar.Style["margin-top"] = "27px"; } else { pnlCalendar.Style["display"] = "inline"; } Controls.Add(txtDate); Controls.Add(pnlCalendar); Controls.Add(btnDate); base.CreateChildControls(); } /// <summary> /// Render the contents of this control. /// </summary> /// <param name="output">The HtmlTextWriter to use.</param> protected override void RenderContents(HtmlTextWriter output) { switch (CalendarPosition) { case CalendarDisplay.DisplayRight: { txtDate.RenderControl(output); btnDate.RenderControl(output); pnlCalendar.RenderControl(output); break; } case CalendarDisplay.DisplayBelow: { pnlCalendar.RenderControl(output); txtDate.RenderControl(output); btnDate.RenderControl(output); break; } } } /// <summary> /// Connect event handlers to events. /// </summary> private void ConnectEventHandlers() { btnDate.Click += new System.EventHandler(btnDate_Click); calDate.SelectionChanged += new System.EventHandler(calDate_SelectionChanged); } } } <%@ Page Language="C#" AutoEventWireup="true" CodeFile="Default.aspx.cs" Inherits="_Default" % <%@ Register Assembly="EclipseWebSolutions.DatePicker" Namespace="EclipseWebSolutions.DatePicker" TagPrefix="ews" % Untitled Page       using System; using System.Data; using System.Configuration; using System.Web; using System.Web.Security; using System.Web.UI; using System.Web.UI.WebControls; using System.Web.UI.WebControls.WebParts; using System.Web.UI.HtmlControls; public partial class _Default : System.Web.UI.Page { protected void Page_Load(object sender, EventArgs e) { } protected void DatePicker1_SelectionChanged(object sender, EventArgs e) { Label1.Text = DatePicker1.DateValue.ToShortDateString(); pnlLabel.Update(); } }

    Read the article

  • SWFObject and IE6 causing hair-pulling agony

    - by Piet
    I recently used SWFObject to display a flash header on a website. I chose SWFObject because: Instead of displaying an annoying ‘Install flash now’ message, it claims to be able to show alternate content. In this case: the original header image. It claims to be compatible with more or less every browser out there. Implementation went fine, until someone tested it on IE6 and got the following error: Internet explorer cannot open the Internet site http://www….. Operation aborted Which basically means that the site just can’t be visited with IE6 (still used a lot in business environments), it even seems as if there’s something wrong with your internet connection. Now, since about 10% of visitors to this site are still using IE6 (why does everyone still use Internet Explorer ???? Do YOU know that these days most people do NOT use Internet Explorer anymore ?) Now after some googling, I found the suggestion to defer loading of the SWFObject.js as follows: <script type="text/javascript" defer=”defer” src=”http://ajax.googleapis.com/ajax/libs/swfobject/2.2/swfobject.js” </script> <script type=”text/javascript” defer=”defer” swfobject.registerObject(”myId”, “9″, “”); </script> What this does according to W3C: When set, this boolean attribute provides a hint to the user agent that the script is not going to generate any document content (e.g., no “document.write” in javascript) and thus, the user agent can continue parsing and rendering. I don’t know exactly why, but: HURRAY! It works now!!! Only… IE6 and IE7 (didn’t try IE8) now gave the following error: Line: 19 Char: 1 Error: ’swfobject’ is undefined Code: 0 URL: http://www… But the flash was still running fine. Still, such an error isn’t clean, especially since almost half of the site’s visitors are using one of these Internet Explorer versions. Now, wanting a quick fix I decided to do the following: <script type="text/javascript" defer="defer" if (typeof(swfobject) != "undefined") swfobject.registerObject("myId", "9", ""); </script> I admit this is a bit of a weird ‘fix’. You’d suspect the flash to stop working on IE6/IE7, which it doesn’t. Not planning on diving into it’s inner bowels, I regard this a ‘mission accomplished’ until someone somewhere posts a better solution (for which I setup some Google alerts). Do you have a better solution? What would be the impact on the webdev economy (or your life) if all browsers were compatible? Addendum Because the above turned out not to work with the new Firefox 3.5.3 (strangely, was OK with 3.5.2 when I tested it) I decided to cut the crap and use the ‘Dynamic Publishing’ way. Ok, so it won’t work for people who have javascript disabled, but who on earth would have flash installed AND javascript disabled? To avoid the IE6 error with the ‘Dynamic Publishing’ way, I call swfobject.embedSWF right after the div that will be replaced with the flash content. Calling swfobject.embedSWF in the <head> would otherwise give me the above error in IE6 again.

    Read the article

  • Migrating SQL Server Databases – The DBA’s Checklist (Part 3)

    - by Sadequl Hussain
    Continuing from Part 2 of the Database Migration Checklist series: Step 10: Full-text catalogs and full-text indexing This is one area of SQL Server where people do not seem to take notice unless something goes wrong. Full-text functionality is a specialised area in database application development and is not usually implemented in your everyday OLTP systems. Nevertheless, if you are migrating a database that uses full-text indexing on one or more tables, you need to be aware a few points. First of all, SQL Server 2005 now allows full-text catalog files to be restored or attached along with the rest of the database. However, after migration, if you are unable to look at the properties of any full-text catalogs, you are probably better off dropping and recreating it. You may also get the following error messages along the way: Msg 9954, Level 16, State 2, Line 1 The Full-Text Service (msftesql) is disabled. The system administrator must enable this service. This basically means full text service is not running (disabled or stopped) in the destination instance. You will need to start it from the Configuration Manager. Similarly, if you get the following message, you will also need to drop and recreate the catalog and populate it. Msg 7624, Level 16, State 1, Line 1 Full-text catalog ‘catalog_name‘ is in an unusable state. Drop and re-create this full-text catalog. A full population of full-text indexes can be a time and resource intensive operation. Obviously you will want to schedule it for low usage hours if the database is restored in an existing production server. Also, bear in mind that any scheduled job that existed in the source server for populating the full text catalog (e.g. nightly process for incremental update) will need to be re-created in the destination. Step 11: Database collation considerations Another sticky area to consider during a migration is the collation setting. Ideally you would want to restore or attach the database in a SQL Server instance with the same collation. Although not used commonly, SQL Server allows you to change a database’s collation by using the ALTER DATABASE command: ALTER DATABASE database_name COLLATE collation_name You should not be using this command for no reason as it can get really dangerous.  When you change the database collation, it does not change the collation of the existing user table columns.  However the columns of every new table, every new UDT and subsequently created variables or parameters in code will use the new setting. The collation of every char, nchar, varchar, nvarchar, text or ntext field of the system tables will also be changed. Stored procedure and function parameters will be changed to the new collation and finally, every character-based system data type and user defined data types will also be affected. And the change may not be successful either if there are dependent objects involved. You may get one or multiple messages like the following: Cannot ALTER ‘object_name‘ because it is being referenced by object ‘dependent_object_name‘. That is why it is important to test and check for collation related issues. Collation also affects queries that use comparisons of character-based data.  If errors arise due to two sides of a comparison being in different collation orders, the COLLATE keyword can be used to cast one side to the same collation as the other. Continues…

    Read the article

  • Device being used by VxVM

    - by Onur Bingul
    If you are using vxvm, you may have issues when you try to unconfigure a disk root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0cfgadm: Component system is busy, try again: failed to offline:     Resource             Information       ----------------       -------------------------/dev/dsk/c1t3d0   Device being used by VxVM“cfgadm unconfigure” command fails here.The way to resolve this is to disable the disks path from DMP control. Since there is only one path to this disk, the “-f” (for force) option needs to be used:root@techsupport2 # vxdmpadm -f disable path=c1t3d0s2root@techsupport2 # vxdmpadm getsubpaths NAME         STATE[A]   PATH-TYPE[M] DMPNODENAME  ENCLR-NAME   CTLR   ATTRS================================================================================c1t6d0       ENABLED(A)   -          disk_0       disk         c1       -c1t3d0       DISABLED(M)   -          disk_1       disk         c1       -c1t0d0s2     ENABLED(A)   -          disk_2       disk         c1       -c1t1d0       ENABLED(A)   -          disk_3       disk         c1       -c3t47d0      ENABLED(A)   -          sun35100_0   sun35100     c3       -c3t47d1      ENABLED(A)   -          sun35100_1   sun35100     c3       -c3t47d2s2    ENABLED(A)   -          sun35100_2   sun35100     c3       -c3t47d3s2    ENABLED(A)   -          sun35100_3   sun35100     c3       -You can see the path now disabled from DMP.root@techsupport2 # cfgadm -c unconfigure c1::dsk/c1t3d0Now you can unconfigure the disk

    Read the article

  • Determining Maximum Txpower a WiFi Card Supports?

    - by BigGenius
    I have a Atheros R9285 wifi card. How can i determine , what is max. Txpower it can support? biggenius@hackbook:~$ iwconfig lo no wireless extensions. wlan0 IEEE 802.11abgn ESSID:"Default" Mode:Managed Frequency:2.437 GHz Access Point: 00:08:5C:9D:4F:40 Bit Rate=2 Mb/s Tx-Power=35 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:on Link Quality=24/70 Signal level=-86 dBm Rx invalid nwid:0 Rx invalid crypt:0 Rx invalid frag:0 Tx excessive retries:140 Invalid misc:247 Missed beacon:0 eth0 no wireless extensions. biggenius@hackbook:~$ iw phy0 info Wiphy phy0 Band 1: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 2412 MHz [1] (35.0 dBm) * 2417 MHz [2] (35.0 dBm) * 2422 MHz [3] (35.0 dBm) * 2427 MHz [4] (35.0 dBm) * 2432 MHz [5] (35.0 dBm) * 2437 MHz [6] (35.0 dBm) * 2442 MHz [7] (35.0 dBm) * 2447 MHz [8] (35.0 dBm) * 2452 MHz [9] (35.0 dBm) * 2457 MHz [10] (35.0 dBm) * 2462 MHz [11] (35.0 dBm) * 2467 MHz [12] (35.0 dBm) * 2472 MHz [13] (35.0 dBm) * 2484 MHz [14] (35.0 dBm) Bitrates (non-HT): * 1.0 Mbps * 2.0 Mbps (short preamble supported) * 5.5 Mbps (short preamble supported) * 11.0 Mbps (short preamble supported) * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps Band 2: Capabilities: 0x11ce HT20/HT40 SM Power Save disabled RX HT40 SGI TX STBC RX STBC 1-stream Max AMSDU length: 3839 bytes DSSS/CCK HT40 Maximum RX AMPDU length 65535 bytes (exponent: 0x003) Minimum RX AMPDU time spacing: 8 usec (0x06) HT TX/RX MCS rate indexes supported: 0-7 Frequencies: * 5180 MHz [36] (35.0 dBm) * 5200 MHz [40] (35.0 dBm) * 5220 MHz [44] (35.0 dBm) * 5240 MHz [48] (35.0 dBm) * 5260 MHz [52] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5280 MHz [56] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5300 MHz [60] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5320 MHz [64] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5500 MHz [100] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5520 MHz [104] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5540 MHz [108] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5560 MHz [112] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5580 MHz [116] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5600 MHz [120] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5620 MHz [124] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5640 MHz [128] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5660 MHz [132] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5680 MHz [136] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5700 MHz [140] (35.0 dBm) (passive scanning, no IBSS, radar detection) * 5745 MHz [149] (35.0 dBm) * 5765 MHz [153] (35.0 dBm) * 5785 MHz [157] (35.0 dBm) * 5805 MHz [161] (35.0 dBm) * 5825 MHz [165] (35.0 dBm) Bitrates (non-HT): * 6.0 Mbps * 9.0 Mbps * 12.0 Mbps * 18.0 Mbps * 24.0 Mbps * 36.0 Mbps * 48.0 Mbps * 54.0 Mbps max # scan SSIDs: 4 max scan IEs length: 2257 bytes Coverage class: 0 (up to 0m) Supported Ciphers: * WEP40 (00-0f-ac:1) * WEP104 (00-0f-ac:5) * TKIP (00-0f-ac:2) * CCMP (00-0f-ac:4) * CMAC (00-0f-ac:6) Available Antennas: TX 0x1 RX 0x3 Configured Antennas: TX 0x1 RX 0x3 Supported interface modes: * IBSS * managed * AP * AP/VLAN * WDS * monitor * mesh point * P2P-client * P2P-GO software interface modes (can always be added): * AP/VLAN * monitor valid interface combinations: * #{ managed, WDS, P2P-client } <= 2048, #{ AP, mesh point, P2P-GO } <= 8, total <= 2048, #channels <= 1 Supported commands: * new_interface * set_interface * new_key * new_beacon * new_station * new_mpath * set_mesh_params * set_bss * authenticate * associate * deauthenticate * disassociate * join_ibss * join_mesh * remain_on_channel * set_tx_bitrate_mask * action * frame_wait_cancel * set_wiphy_netns * set_channel * set_wds_peer * Unknown command (82) * Unknown command (81) * Unknown command (84) * Unknown command (87) * Unknown command (85) * testmode * connect * disconnect Supported TX frame types: * IBSS: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * managed: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * AP/VLAN: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * mesh point: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-client: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 * P2P-GO: 0x0000 0x0010 0x0020 0x0030 0x0040 0x0050 0x0060 0x0070 0x0080 0x0090 0x00a0 0x00b0 0x00c0 0x00d0 0x00e0 0x00f0 Supported RX frame types: * IBSS: 0x00d0 * managed: 0x0040 0x00d0 * AP: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * AP/VLAN: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 * mesh point: 0x00b0 0x00c0 0x00d0 * P2P-client: 0x0040 0x00d0 * P2P-GO: 0x0000 0x0020 0x0040 0x00a0 0x00b0 0x00c0 0x00d0 Device supports RSN-IBSS.

    Read the article

  • DirectX works for 64-bit but not 32-bit

    - by dtbarne
    I'm trying to play a game (Civilization 5) which was previously working but no longer. I believe I've narrowed it down to a DirectX issue because I get an error running dxdiag.exe in 32 bit mode. My goal (at least I believe) is to get Direct3D Acceleration "Enabled" in dxdiag (as it is in 64 bit dxdiag). A very similar issue is here: http://answers.microsoft.com/en-us/windows/forum/windows_7-gaming/direct3d-acceleration-is-not-available-in-windows/4c345e6e-dc68-e011-8dfc-68b599b31bf5?page=1 The proposed answer, which looks very promising, doesn't seem to work for me. Like other users in that thread, HKEY_LOCAL_MACHINE\SOFTWARE\Wow6432Node\Microsoft\Direct3D\Drivers does not have a SoftwareOnly key to change. I even tried manually adding it as a string and dword, to no avail. I have a NVIDIA GeForce GT 525M, and before you ask, yes I've tried updating (also uninstalling, reinstalling) my drivers. I've also tried doing the same with DirectX (and Civilization 5 for that matter). Been debugging for some 4+ hours now after a full day of work and I've run out of ideas. I'm hoping somebody knows the solution here! :) Here's what I see when I open dxdiag: DxDiag has detected that there mgiht have been a problem accessing Direct3D the last time this program was used. Would you like to bypass Direct3D this time? No - Crash Yes - Works, but in Display tab: DirectDraw Acceleration: Disabled Direct3D Acceleration: Not Available AGP Texture Acceleration: Not Available If I click "Run 64-bit DxDiag", all three are "Enabled". I should also note that I've tried the following steps as Microsoft suggests, but I'm not able to do so as the "Change Settings" button is disabled. Some programs run very slowly—or not at all—unless Microsoft DirectDraw or Direct3D hardware acceleration is turned on. To determine this, click the Display tab, and then under DirectX Features, check to see whether DirectDraw, Direct3D, and AGP Texture Acceleration appear as Enabled. If not, try turning on hardware acceleration. Click to open Screen Resolution. Click Advanced settings. Click the Troubleshoot tab, and then click Change settings. If you're prompted for an administrator password or confirmation, type the password or provide confirmation. Move the Hardware Acceleration slider to Full. Full dxdiag dump: ------------------ System Information ------------------ Time of this report: 11/8/2012, 23:13:24 Machine name: DTBARNE Operating System: Windows 7 Professional 64-bit (6.1, Build 7601) Service Pack 1 (7601.win7sp1_gdr.120830-0333) Language: English (Regional Setting: English) System Manufacturer: Dell Inc. System Model: Dell System XPS L502X BIOS: Default System BIOS Processor: Intel(R) Core(TM) i5-2450M CPU @ 2.50GHz (4 CPUs), ~2.5GHz Memory: 8192MB RAM Available OS Memory: 8086MB RAM Page File: 2466MB used, 13704MB available Windows Dir: C:\Windows DirectX Version: DirectX 11 DX Setup Parameters: Not found User DPI Setting: Using System DPI System DPI Setting: 96 DPI (100 percent) DWM DPI Scaling: Disabled DxDiag Version: 6.01.7601.17514 32bit Unicode DxDiag Previously: Crashed in Direct3D (stage 2). Re-running DxDiag with "dontskip" command line parameter or choosing not to bypass information gathering when prompted might result in DxDiag successfully obtaining this information ------------ DxDiag Notes ------------ Display Tab 1: No problems found. Sound Tab 1: No problems found. Sound Tab 2: No problems found. Input Tab: No problems found. -------------------- DirectX Debug Levels -------------------- Direct3D: 0/4 (retail) DirectDraw: 0/4 (retail) DirectInput: 0/5 (retail) DirectMusic: 0/5 (retail) DirectPlay: 0/9 (retail) DirectSound: 0/5 (retail) DirectShow: 0/6 (retail) --------------- Display Devices --------------- Card name: Intel(R) HD Graphics 3000 Manufacturer: Chip type: DAC type: Device Key: Enum\PCI\VEN_8086&DEV_0126&SUBSYS_04B61028&REV_09 Display Memory: Dedicated Memory: n/a Shared Memory: n/a Current Mode: 1920 x 1080 (32 bit) (60Hz) Monitor Name: Generic PnP Monitor Monitor Model: Monitor Id: Native Mode: Output Type: Driver Name: Driver File Version: () Driver Version: DDI Version: Driver Model: WDDM 1.1 Driver Attributes: Final Retail Driver Date/Size: , 0 bytes WHQL Logo'd: n/a WHQL Date Stamp: n/a Device Identifier: Vendor ID: Device ID: SubSys ID: Revision ID: Driver Strong Name: oem11.inf:IntelGfx.NTamd64.6.0:iSNBM0:8.15.10.2696:pci\ven_8086&dev_0126&subsys_04b61028 Rank Of Driver: 00E60001 Video Accel: Deinterlace Caps: n/a D3D9 Overlay: DXVA-HD: DDraw Status: Disabled D3D Status: Not Available AGP Status: Not Available ------------- Sound Devices ------------- Description: Speakers (High Definition Audio Device) Default Sound Playback: Yes Default Voice Playback: Yes Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0665&SUBSYS_102804B6&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 11/20/2010 22:23:47, 350208 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No Description: Digital Audio (S/PDIF) (High Definition Audio Device) Default Sound Playback: No Default Voice Playback: No Hardware ID: HDAUDIO\FUNC_01&VEN_10EC&DEV_0665&SUBSYS_102804B6&REV_1000 Manufacturer ID: 1 Product ID: 65535 Type: WDM Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail WHQL Logo'd: Yes Date and Size: 11/20/2010 22:23:47, 350208 bytes Other Files: Driver Provider: Microsoft HW Accel Level: Basic Cap Flags: 0xF1F Min/Max Sample Rate: 100, 200000 Static/Strm HW Mix Bufs: 1, 0 Static/Strm HW 3D Bufs: 0, 0 HW Memory: 0 Voice Management: No EAX(tm) 2.0 Listen/Src: No, No I3DL2(tm) Listen/Src: No, No Sensaura(tm) ZoomFX(tm): No --------------------- Sound Capture Devices --------------------- Description: Microphone (High Definition Audio Device) Default Sound Capture: Yes Default Voice Capture: Yes Driver Name: HdAudio.sys Driver Version: 6.01.7601.17514 (English) Driver Attributes: Final Retail Date and Size: 11/20/2010 22:23:47, 350208 bytes Cap Flags: 0x1 Format Flags: 0xFFFFF ------------------- DirectInput Devices ------------------- Device Name: Mouse Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Device Name: Keyboard Attached: 1 Controller ID: n/a Vendor/Product ID: n/a FF Driver: n/a Poll w/ Interrupt: No ----------- USB Devices ----------- + USB Root Hub | Vendor/Product ID: 0x8086, 0x1C26 | Matching Device ID: usb\root_hub20 | Service: usbhub | +-+ Generic USB Hub | | Vendor/Product ID: 0x8087, 0x0024 | | Location: Port_#0001.Hub_#0002 | | Matching Device ID: usb\class_09 | | Service: usbhub ---------------- Gameport Devices ---------------- ------------ PS/2 Devices ------------ + Standard PS/2 Keyboard | Matching Device ID: *pnp0303 | Service: i8042prt | + Terminal Server Keyboard Driver | Matching Device ID: root\rdp_kbd | Upper Filters: kbdclass | Service: TermDD | + Synaptics PS/2 Port TouchPad | Matching Device ID: *dll04b6 | Upper Filters: SynTP | Service: i8042prt | + Terminal Server Mouse Driver | Matching Device ID: root\rdp_mou | Upper Filters: mouclass | Service: TermDD ------------------------ Disk & DVD/CD-ROM Drives ------------------------ Drive: C: Free Space: 26.2 GB Total Space: 122.0 GB File System: NTFS Model: M4-CT128M4SSD2 ATA Device Drive: D: Model: Optiarc DVDRWBD BC-5540H ATA Device Driver: c:\windows\system32\drivers\cdrom.sys, 6.01.7601.17514 (English), , 0 bytes -------------- System Devices -------------- Name: High Definition Audio Controller Device ID: PCI\VEN_8086&DEV_1C20&SUBSYS_04B61028&REV_05\3&11583659&0&D8 Driver: n/a Name: PCI standard host CPU bridge Device ID: PCI\VEN_8086&DEV_0104&SUBSYS_04B61028&REV_09\3&11583659&0&00 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C1A&SUBSYS_04B61028&REV_B5\3&11583659&0&E5 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_0101&SUBSYS_20108086&REV_09\3&11583659&0&08 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C18&SUBSYS_04B61028&REV_B5\3&11583659&0&E4 Driver: n/a Name: Intel(R) Centrino(R) Advanced-N 6230 Device ID: PCI\VEN_8086&DEV_0091&SUBSYS_52218086&REV_34\4&2634DE8D&0&00E1 Driver: n/a Name: PCI standard ISA bridge Device ID: PCI\VEN_8086&DEV_1C4B&SUBSYS_04B61028&REV_05\3&11583659&0&F8 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C16&SUBSYS_04B61028&REV_B5\3&11583659&0&E3 Driver: n/a Name: Realtek PCIe GBE Family Controller Device ID: PCI\VEN_10EC&DEV_8168&SUBSYS_04B61028&REV_06\4&109EAB2F&0&00E5 Driver: n/a Name: Intel(R) Management Engine Interface Device ID: PCI\VEN_8086&DEV_1C3A&SUBSYS_04B61028&REV_04\3&11583659&0&B0 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C12&SUBSYS_04B61028&REV_B5\3&11583659&0&E1 Driver: n/a Name: NVIDIA GeForce GT 525M Device ID: PCI\VEN_10DE&DEV_0DF5&SUBSYS_04B61028&REV_A1\4&4DCA75F&0&0008 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_8086&DEV_1C2D&SUBSYS_04B61028&REV_05\3&11583659&0&D0 Driver: n/a Name: PCI standard PCI-to-PCI bridge Device ID: PCI\VEN_8086&DEV_1C10&SUBSYS_04B61028&REV_B5\3&11583659&0&E0 Driver: n/a Name: Standard Enhanced PCI to USB Host Controller Device ID: PCI\VEN_8086&DEV_1C26&SUBSYS_04B61028&REV_05\3&11583659&0&E8 Driver: n/a Name: Standard AHCI 1.0 Serial ATA Controller Device ID: PCI\VEN_8086&DEV_1C03&SUBSYS_04B61028&REV_05\3&11583659&0&FA Driver: n/a Name: SM Bus Controller Device ID: PCI\VEN_8086&DEV_1C22&SUBSYS_04B61028&REV_05\3&11583659&0&FB Driver: n/a Name: Intel(R) HD Graphics 3000 Device ID: PCI\VEN_8086&DEV_0126&SUBSYS_04B61028&REV_09\3&11583659&0&10 Driver: n/a Name: Renesas Electronics USB 3.0 Host Controller Device ID: PCI\VEN_1033&DEV_0194&SUBSYS_04B61028&REV_04\4&3494AC3A&0&00E3 Driver: n/a ------------------ DirectShow Filters ------------------ DirectShow Filters: WMAudio Decoder DMO,0x00800800,1,1,WMADMOD.DLL,6.01.7601.17514 WMAPro over S/PDIF DMO,0x00600800,1,1,WMADMOD.DLL,6.01.7601.17514 WMSpeech Decoder DMO,0x00600800,1,1,WMSPDMOD.DLL,6.01.7601.17514 MP3 Decoder DMO,0x00600800,1,1,mp3dmod.dll,6.01.7600.16385 Mpeg4s Decoder DMO,0x00800001,1,1,mp4sdecd.dll,6.01.7600.16385 WMV Screen decoder DMO,0x00600800,1,1,wmvsdecd.dll,6.01.7601.17514 WMVideo Decoder DMO,0x00800001,1,1,wmvdecod.dll,6.01.7601.17514 Mpeg43 Decoder DMO,0x00800001,1,1,mp43decd.dll,6.01.7600.16385 Mpeg4 Decoder DMO,0x00800001,1,1,mpg4decd.dll,6.01.7600.16385 DV Muxer,0x00400000,0,0,qdv.dll,6.06.7601.17514 Color Space Converter,0x00400001,1,1,quartz.dll,6.06.7601.17713 WM ASF Reader,0x00400000,0,0,qasf.dll,12.00.7601.17514 Screen Capture filter,0x00200000,0,1,wmpsrcwp.dll,12.00.7601.17514 AVI Splitter,0x00600000,1,1,quartz.dll,6.06.7601.17713 VGA 16 Color Ditherer,0x00400000,1,1,quartz.dll,6.06.7601.17713 SBE2MediaTypeProfile,0x00200000,0,0,sbe.dll,6.06.7601.17528 Microsoft DTV-DVD Video Decoder,0x005fffff,2,4,msmpeg2vdec.dll,6.01.7140.0000 AC3 Parser Filter,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528 StreamBufferSink,0x00200000,0,0,sbe.dll,6.06.7601.17528 MJPEG Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713 MPEG-I Stream Splitter,0x00600000,1,2,quartz.dll,6.06.7601.17713 SAMI (CC) Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514 MPEG-2 Splitter,0x005fffff,1,0,mpg2splt.ax,6.06.7601.17528 Closed Captions Analysis Filter,0x00200000,2,5,cca.dll,6.06.7601.17514 SBE2FileScan,0x00200000,0,0,sbe.dll,6.06.7601.17528 Microsoft MPEG-2 Video Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514 Internal Script Command Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713 MPEG Audio Decoder,0x03680001,1,1,quartz.dll,6.06.7601.17713 DV Splitter,0x00600000,1,2,qdv.dll,6.06.7601.17514 Video Mixing Renderer 9,0x00200000,1,0,quartz.dll,6.06.7601.17713 Microsoft MPEG-2 Encoder,0x00200000,2,1,msmpeg2enc.dll,6.01.7601.17514 ACM Wrapper,0x00600000,1,1,quartz.dll,6.06.7601.17713 Video Renderer,0x00800001,1,0,quartz.dll,6.06.7601.17713 MPEG-2 Video Stream Analyzer,0x00200000,0,0,sbe.dll,6.06.7601.17528 Line 21 Decoder,0x00600000,1,1,qdvd.dll,6.06.7601.17835 Video Port Manager,0x00600000,2,1,quartz.dll,6.06.7601.17713 Video Renderer,0x00400000,1,0,quartz.dll,6.06.7601.17713 VPS Decoder,0x00200000,0,0,WSTPager.ax,6.06.7601.17514 WM ASF Writer,0x00400000,0,0,qasf.dll,12.00.7601.17514 VBI Surface Allocator,0x00600000,1,1,vbisurf.ax,6.01.7601.17514 File writer,0x00200000,1,0,qcap.dll,6.06.7601.17514 iTV Data Sink,0x00600000,1,0,itvdata.dll,6.06.7601.17514 iTV Data Capture filter,0x00600000,1,1,itvdata.dll,6.06.7601.17514 DVD Navigator,0x00200000,0,3,qdvd.dll,6.06.7601.17835 Overlay Mixer2,0x00200000,1,1,qdvd.dll,6.06.7601.17835 AVI Draw,0x00600064,9,1,quartz.dll,6.06.7601.17713 RDP DShow Redirection Filter,0xffffffff,1,0,DShowRdpFilter.dll, Microsoft MPEG-2 Audio Encoder,0x00200000,1,1,msmpeg2enc.dll,6.01.7601.17514 WST Pager,0x00200000,1,1,WSTPager.ax,6.06.7601.17514 MPEG-2 Demultiplexer,0x00600000,1,1,mpg2splt.ax,6.06.7601.17528 DV Video Decoder,0x00800000,1,1,qdv.dll,6.06.7601.17514 SampleGrabber,0x00200000,1,1,qedit.dll,6.06.7601.17514 Null Renderer,0x00200000,1,0,qedit.dll,6.06.7601.17514 MPEG-2 Sections and Tables,0x005fffff,1,0,Mpeg2Data.ax,6.06.7601.17514 Microsoft AC3 Encoder,0x00200000,1,1,msac3enc.dll,6.01.7601.17514 StreamBufferSource,0x00200000,0,0,sbe.dll,6.06.7601.17528 Smart Tee,0x00200000,1,2,qcap.dll,6.06.7601.17514 Overlay Mixer,0x00200000,0,0,qdvd.dll,6.06.7601.17835 AVI Decompressor,0x00600000,1,1,quartz.dll,6.06.7601.17713 AVI/WAV File Source,0x00400000,0,2,quartz.dll,6.06.7601.17713 Wave Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 MIDI Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 Multi-file Parser,0x00400000,1,1,quartz.dll,6.06.7601.17713 File stream renderer,0x00400000,1,1,quartz.dll,6.06.7601.17713 Microsoft DTV-DVD Audio Decoder,0x005fffff,1,1,msmpeg2adec.dll,6.01.7140.0000 StreamBufferSink2,0x00200000,0,0,sbe.dll,6.06.7601.17528 AVI Mux,0x00200000,1,0,qcap.dll,6.06.7601.17514 Line 21 Decoder 2,0x00600002,1,1,quartz.dll,6.06.7601.17713 File Source (Async.),0x00400000,0,1,quartz.dll,6.06.7601.17713 File Source (URL),0x00400000,0,1,quartz.dll,6.06.7601.17713 Infinite Pin Tee Filter,0x00200000,1,1,qcap.dll,6.06.7601.17514 Enhanced Video Renderer,0x00200000,1,0,evr.dll,6.01.7601.17514 BDA MPEG2 Transport Information Filter,0x00200000,2,0,psisrndr.ax,6.06.7601.17669 MPEG Video Decoder,0x40000001,1,1,quartz.dll,6.06.7601.17713 WDM Streaming Tee/Splitter Devices: Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Video Compressors: WMVideo8 Encoder DMO,0x00600800,1,1,wmvxencd.dll,6.01.7600.16385 WMVideo9 Encoder DMO,0x00600800,1,1,wmvencod.dll,6.01.7600.16385 MSScreen 9 encoder DMO,0x00600800,1,1,wmvsencd.dll,6.01.7600.16385 DV Video Encoder,0x00200000,0,0,qdv.dll,6.06.7601.17514 MJPEG Compressor,0x00200000,0,0,quartz.dll,6.06.7601.17713 Cinepak Codec by Radius,0x00200000,1,1,qcap.dll,6.06.7601.17514 Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514 Intel IYUV codec,0x00200000,1,1,qcap.dll,6.06.7601.17514 Microsoft RLE,0x00200000,1,1,qcap.dll,6.06.7601.17514 Microsoft Video 1,0x00200000,1,1,qcap.dll,6.06.7601.17514 Audio Compressors: WM Speech Encoder DMO,0x00600800,1,1,WMSPDMOE.DLL,6.01.7600.16385 WMAudio Encoder DMO,0x00600800,1,1,WMADMOE.DLL,6.01.7600.16385 IMA ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 PCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 Microsoft ADPCM,0x00200000,1,1,quartz.dll,6.06.7601.17713 GSM 6.10,0x00200000,1,1,quartz.dll,6.06.7601.17713 CCITT A-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713 CCITT u-Law,0x00200000,1,1,quartz.dll,6.06.7601.17713 MPEG Layer-3,0x00200000,1,1,quartz.dll,6.06.7601.17713 Audio Capture Sources: Microphone (High Definition Aud,0x00200000,0,0,qcap.dll,6.06.7601.17514 PBDA CP Filters: PBDA DTFilter,0x00600000,1,1,CPFilters.dll,6.06.7601.17528 PBDA ETFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528 PBDA PTFilter,0x00200000,0,0,CPFilters.dll,6.06.7601.17528 Midi Renderers: Default MidiOut Device,0x00800000,1,0,quartz.dll,6.06.7601.17713 Microsoft GS Wavetable Synth,0x00200000,1,0,quartz.dll,6.06.7601.17713 WDM Streaming Capture Devices: HD Audio Microphone 2,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Integrated Webcam,0x00200000,1,2,ksproxy.ax,6.01.7601.17514 WDM Streaming Rendering Devices: HD Audio Headphone/Speakers,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 HD Audio SPDIF out,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 BDA Network Providers: Microsoft ATSC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBC Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBS Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft DVBT Network Provider,0x00200000,0,1,MSDvbNP.ax,6.06.7601.17514 Microsoft Network Provider,0x00200000,0,1,MSNP.ax,6.06.7601.17514 Video Capture Sources: Integrated Webcam,0x00200000,1,2,ksproxy.ax,6.01.7601.17514 Multi-Instance Capable VBI Codecs: VBI Codec,0x00600000,1,4,VBICodec.ax,6.06.7601.17514 BDA Transport Information Renderers: BDA MPEG2 Transport Information Filter,0x00600000,2,0,psisrndr.ax,6.06.7601.17669 MPEG-2 Sections and Tables,0x00600000,1,0,Mpeg2Data.ax,6.06.7601.17514 BDA CP/CA Filters: Decrypt/Tag,0x00600000,1,1,EncDec.dll,6.06.7601.17708 Encrypt/Tag,0x00200000,0,0,EncDec.dll,6.06.7601.17708 PTFilter,0x00200000,0,0,EncDec.dll,6.06.7601.17708 XDS Codec,0x00200000,0,0,EncDec.dll,6.06.7601.17708 WDM Streaming Communication Transforms: Tee/Sink-to-Sink Converter,0x00200000,1,1,ksproxy.ax,6.01.7601.17514 Audio Renderers: Speakers (High Definition Audio,0x00200000,1,0,quartz.dll,6.06.7601.17713 Default DirectSound Device,0x00800000,1,0,quartz.dll,6.06.7601.17713 Default WaveOut Device,0x00200000,1,0,quartz.dll,6.06.7601.17713 Digital Audio (S/PDIF) (High De,0x00200000,1,0,quartz.dll,6.06.7601.17713 DirectSound: Digital Audio (S/PDIF) (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713 DirectSound: Speakers (High Definition Audio Device),0x00200000,1,0,quartz.dll,6.06.7601.17713 --------------- EVR Power Information --------------- Current Setting: {651288E5-A7ED-4076-A96B-6CC62D848FE1} (Balanced) Quality Flags: 2576 Enabled: Force throttling Allow half deinterlace Allow scaling Decode Power Usage: 100 Balanced Flags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 50 PowerFlags: 1424 Enabled: Force throttling Allow batching Force half deinterlace Force scaling Decode Power Usage: 0

    Read the article

  • Monitor and Control Memory Usage in Google Chrome

    - by Asian Angel
    Do you want to know just how much memory Google Chrome and any installed extensions are using at a given moment? With just a few clicks you can see just what is going on under the hood of your browser. How Much Memory are the Extensions Using? Here is our test browser with a new tab and the Extensions Page open, five enabled extensions, and one disabled at the moment. You can access Chrome’s Task Manager using the Page Menu, going to Developer, and selecting Task manager… Or by right clicking on the Tab Bar and selecting Task manager. There is also a keyboard shortcut (Shift + Esc) available for the “keyboard ninjas”. Sitting idle as shown above here are the stats for our test browser. All of the extensions are sitting there eating memory even though some of them are not available/active for use on our new tab and Extensions Page. Not so good… If the default layout is not to your liking then you can easily modify the information that is available by right clicking and adding/removing extra columns as desired. For our example we added Shared Memory & Private Memory. Using the about:memory Page to View Memory Usage Want even more detail? Type about:memory into the Address Bar and press Enter. Note: You can also access this page by clicking on the Stats for nerds Link in the lower left corner of the Task Manager Window. Focusing on the four distinct areas you can see the exact version of Chrome that is currently installed on your system… View the Memory & Virtual Memory statistics for Chrome… Note: If you have other browsers running at the same time you can view statistics for them here too. See a list of the Processes currently running… And the Memory & Virtual Memory statistics for those processes. The Difference with the Extensions Disabled Just for fun we decided to disable all of the extension in our test browser… The Task Manager Window is looking rather empty now but the memory consumption has definitely seen an improvement. Comparing Memory Usage for Two Extensions with Similar Functions For our next step we decided to compare the memory usage for two extensions with similar functionality. This can be helpful if you are wanting to keep memory consumption trimmed down as much as possible when deciding between similar extensions. First up was Speed Dial”(see our review here). The stats for Speed Dial…quite a change from what was shown above (~3,000 – 6,000 K). Next up was Incredible StartPage (see our review here). Surprisingly both were nearly identical in the amount of memory being used. Purging Memory Perhaps you like the idea of being able to “purge” some of that excess memory consumption. With a simple command switch modification to Chrome’s shortcut(s) you can add a Purge Memory Button to the Task Manager Window as shown below.  Notice the amount of memory being consumed at the moment… Note: The tutorial for adding the command switch can be found here. One quick click and there is a noticeable drop in memory consumption. Conclusion We hope that our examples here will prove useful to you in managing the memory consumption in your own Google Chrome installation. If you have a computer with limited resources every little bit definitely helps out. Similar Articles Productive Geek Tips Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersFix for Firefox memory leak on WindowsHow to Purge Memory in Google ChromeHow to Make Google Chrome Your Default Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

    Read the article

  • Monitor SQL Server Replication Jobs

    - by Yaniv Etrogi
    The Replication infrastructure in SQL Server is implemented using SQL Server Agent to execute the various components involved in the form of a job (e.g. LogReader agent job, Distribution agent job, Merge agent job) SQL Server jobs execute a binary executable file which is basically C++ code. You can download all the scripts for this article here SQL Server Job Schedules By default each of job has only one schedule that is set to Start automatically when SQL Server Agent starts. This schedule ensures that when ever the SQL Server Agent service is started all the replication components are also put into action. This is OK and makes sense but there is one problem with this default configuration that needs improvement  -  if for any reason one of the components fails it remains down in a stopped state.   Unless you monitor the status of each component you will typically get to know about such a failure from a customer complaint as a result of missing data or data that is not up to date at the subscriber level. Furthermore, having any of these components in a stopped state can lead to more severe problems if not corrected within a short time. The action required to improve on this default settings is in fact very simple. Adding a second schedule that is set as a Daily Reoccurring schedule which runs every 1 minute does the trick. SQL Server Agent’s scheduler module knows how to handle overlapping schedules so if the job is already being executed by another schedule it will not get executed again at the same time. So, in the event of a failure the failed job remains down for at most 60 seconds. Many DBAs are not aware of this capability and so search for more complex solutions such as having an additional dedicated job running an external code in VBS or another scripting language that detects replication jobs in a stopped state and starts them but there is no need to seek such external solutions when what is needed can be accomplished by T-SQL code. SQL Server Jobs Status In addition to the 1 minute schedule we also want to ensure that key components in the replication are enabled so I can search for those components by their Category, and set their status to enabled in case they are disabled, by executing the stored procedure MonitorEnableReplicationAgents. The jobs that I typically have handled are listed below but you may want to extend this, so below is the query to return all jobs along with their category. SELECT category_id, name FROM msdb.dbo.syscategories ORDER BY category_id; Distribution Cleanup LogReader Agent Distribution Agent Snapshot Agent Jobs By default when a publication is created, a snapshot agent job also gets created with a daily schedule. I see more organizations where the snapshot agent job does not need to be executed automatically by the SQL Server Agent  scheduler than organizations who   need a new snapshot generated automatically. To assure this setting is in place I created the stored procedure MonitorSnapshotAgentsSchedules which disables snapshot agent jobs and also deletes the job schedule. It is worth mentioning that when the publication property immediate_sync is turned off then the snapshot files are not created when the Snapshot agent is executed by the job. You control this property when the publication is created with a parameter called @immediate_sync passed to sp_addpublication and for an existing publication you can use sp_changepublication. Implementation The scripts assume the existence of a database named PerfDB. Steps: Run the scripts to create the stored procedures in the PerfDB database. Create a job that executes the stored procedures every hour. -- Verify that the 1_Minute schedule exists. EXEC PerfDB.dbo.MonitorReplicationAgentsSchedules @CategoryId = 10; /* Distribution */ EXEC PerfDB.dbo.MonitorReplicationAgentsSchedules @CategoryId = 13; /* LogReader */ -- Verify all replication agents are enabled. EXEC PerfDB.dbo.MonitorEnableReplicationAgents @CategoryId = 10; /* Distribution */ EXEC PerfDB.dbo.MonitorEnableReplicationAgents @CategoryId = 13; /* LogReader */ EXEC PerfDB.dbo.MonitorEnableReplicationAgents @CategoryId = 11; /* Distribution clean up */ -- Verify that Snapshot agents are disabled and have no schedule EXEC PerfDB.dbo.MonitorSnapshotAgentsSchedules; Want to read more of about replication? Check at my replication posts at my blog.

    Read the article

  • Interrupted Upgrade from 11.10 to 12.04

    - by Tamil
    My upgrade using alternative iso from 11.10 to 12.04 got interrupted and I had to hard restart my machine. Now I feel that everything is recovered except my already installed packages like vim. How do I backup my home folder for fresh installation of ubuntu? Following are the errors I'm facing I couldn't mark any package for re-installation in synaptic or remove and install too. output of sudo apt-get install vim Building dependency tree Reading state information... Done Package vim is not available, but is referred to by another package. This may mean that the package is missing, has been obsoleted, or is only available from another source E: Package 'vim' has no installation candidate If I try installing it from synaptic I get apache2.2-common: Package apache2.2-common has no available version, but exists in the database. This typically means that the package was mentioned in a dependency and never uploaded, has been obsoleted or is not available with the contents of sources.list my sources.list file # added by the release upgrader # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # added by the release upgrader # # deb cdrom:[Ubuntu 12.04.1 LTS _Precise Pangolin_ - Release amd64 (20120822.4)]/ precise main restricted # deb cdrom:[Ubuntu 11.04 _Natty Narwhal_ - Release amd64 (20110427.1)]/ natty main restricted # See http://help.ubuntu.com/community/UpgradeNotes for how to upgrade to # newer versions of the distribution. deb http://archive.ubuntu.com/ubuntu precise main restricted deb-src http://archive.ubuntu.com/ubuntu precise main restricted ## Major bug fix updates produced after the final release of the ## distribution. deb http://archive.ubuntu.com/ubuntu precise-updates main restricted deb-src http://archive.ubuntu.com/ubuntu precise-updates main restricted ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team. Also, please note that software in universe WILL NOT receive any ## review or updates from the Ubuntu security team. deb http://archive.ubuntu.com/ubuntu precise universe deb-src http://archive.ubuntu.com/ubuntu precise universe deb http://archive.ubuntu.com/ubuntu precise-updates universe deb-src http://archive.ubuntu.com/ubuntu precise-updates universe ## N.B. software from this repository is ENTIRELY UNSUPPORTED by the Ubuntu ## team, and may not be under a free licence. Please satisfy yourself as to ## your rights to use the software. Also, please note that software in ## multiverse WILL NOT receive any review or updates from the Ubuntu ## security team. deb http://archive.ubuntu.com/ubuntu precise multiverse deb-src http://archive.ubuntu.com/ubuntu precise multiverse deb http://archive.ubuntu.com/ubuntu precise-updates multiverse deb-src http://archive.ubuntu.com/ubuntu precise-updates multiverse ## Uncomment the following two lines to add software from the 'backports' ## repository. ## N.B. software from this repository may not have been tested as ## extensively as that contained in the main release, although it includes ## newer versions of some applications which may provide useful features. ## Also, please note that software in backports WILL NOT receive any review ## or updates from the Ubuntu security team. # deb http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse # deb-src http://us.archive.ubuntu.com/ubuntu/ natty-backports main restricted universe multiverse deb http://archive.ubuntu.com/ubuntu precise-security main restricted deb-src http://archive.ubuntu.com/ubuntu precise-security main restricted deb http://archive.ubuntu.com/ubuntu precise-security universe deb-src http://archive.ubuntu.com/ubuntu precise-security universe deb http://archive.ubuntu.com/ubuntu precise-security multiverse deb-src http://archive.ubuntu.com/ubuntu precise-security multiverse ## Uncomment the following two lines to add software from Canonical's ## 'partner' repository. ## This software is not part of Ubuntu, but is offered by Canonical and the ## respective vendors as a service to Ubuntu users. deb http://archive.canonical.com/ubuntu precise partner # deb-src http://archive.canonical.com/ubuntu natty partner ## This software is not part of Ubuntu, but is offered by third-party ## developers who want to ship their latest software. deb http://extras.ubuntu.com/ubuntu precise main deb-src http://extras.ubuntu.com/ubuntu precise main # deb http://tamil.3758_gmail.com:[email protected]/free unstable main # disabled on upgrade to oneiric # deb http://debian.datastax.com/natty oneiric main # disabled on upgrade to oneiric sudo apt-get update Err http://archive.ubuntu.com precise InRelease Err http://archive.canonical.com precise InRelease Err http://archive.ubuntu.com precise-updates InRelease Err http://archive.ubuntu.com precise-security InRelease Err http://extras.ubuntu.com precise InRelease Err http://archive.canonical.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-updates Release.gpg Unable to connect to 172.16.140.249:3142: Err http://extras.ubuntu.com precise Release.gpg Unable to connect to 172.16.140.249:3142: Err http://archive.ubuntu.com precise-security Release.gpg Unable to connect to 172.16.140.249:3142: W: Failed to fetch http://archive.ubuntu.com/ubuntu/dists/precise/InRelease

    Read the article

  • How-to enable user session time out warning (JDev 11.1.1.4)

    - by frank.nimphius
    Normal 0 false false false EN-US X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Oracle JDeveloper 11.1.1.4 contains a new session time-out warning functionality. Quoting the Oracle® Fusion Middleware Web User Interface Developer's Guide for Oracle Application Development Framework11g Release 1 (11.1.1.4.0) documentatiom http://download.oracle.com/docs/cd/E17904_01/web.1111/b31973/ap_config.htm#BABFIGBA "When a request is sent to the server, a session timeout value is written to the page and the session timeout warning interval is defined by the context parameter  oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT. The user is given the opportunity to extend the session in a warning dialog, and a notification is sent when the session has expired and the page is refreshed. Depending on the application security configuration, the user may be redirected to the log in page when the session expires. Use the oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT context parameter to set the number of seconds prior to the session time out when a warning dialog is displayed. If the value of WARNING_BEFORE_TIMEOUT is less than 120 seconds, if client state saving is used for the page, or if the session has been invalidated, the feature is disabled. The session time-out value it taken directly from the session. Example A-3 shows configuration of the warning dialog to display at 120 seconds before the time-out of the session. Example A-3 Configuration of Session Time-out Warning <context-param>    <param-name>        oracle.adf.view.rich.sessionHandling.WARNING_BEFORE_TIMEOUT   </param-name>    <param-value>120</param-value> </context-param> The default value of this parameter is 120 seconds. To prevent notification of the user too frequently when the session time-out is set too short, the actual value of WARNING_BEFORE_TIMEOUT is determined dynamically, where the session time-out must be more than 2 minutes or the feature is disabled.

    Read the article

  • CacheAdapter 2.4 – Bug fixes and minor functional update

    - by Glav
    Note: If you are unfamiliar with the CacheAdapter library and what it does, you can read all about its awesome ability to utilise memory, Asp.Net Web, Windows Azure AppFabric and memcached caching implementations via a single unified, simple to use API from here and here.. The CacheAdapter library is receiving an update to version 2.4 and is currently available on Nuget here. Update: The CacheAdapter has actualy just had a minor revision to 2.4.1. This significantly increases the performance and reliability in memcached scenario under more extreme loads. General to moderate usage wont see any noticeable difference though. Bugs This latest version fixes a big that is only present in the memcached implementation and is only seen in rare, intermittent times (making i particularly hard to find). The bug is where a cache node would be removed from the farm when errors in deserialization of cached objects would occur due to serialised data not being read from the stream in entirety. The code also contains enhancements to better surface serialization exceptions to aid in the debugging process. This is also specifically targeted at the memcached implementation. This is important when moving from something like memory or Asp.Web caching mechanisms to memcached where the serialization rules are not as lenient. There are a few other minor bug fixes, code cleanup and a little refactoring. Minor feature addition In addition to this bug fix, many people have asked for a single setting to either enable or disable the cache.In this version, you can disable the cache by setting the IsCacheEnabled flag to false in the application configuration file. Something like the example below: <Glav.CacheAdapter.MainConfig> <setting name="CacheToUse" serializeAs="String"> <value>memcached</value> </setting> <setting name="DistributedCacheServers" serializeAs="String"> <value>localhost:11211</value> </setting> <setting name="IsCacheEnabled" serializeAs="String"> <value>False</value> </setting> </Glav.CacheAdapter.MainConfig> Your reasons to use this feature may vary (perhaps some performance testing or problem diagnosis). At any rate, disabling the cache will cause every attempt to retrieve data from the cache, resulting in a cache miss and returning null. If you are using the ICacheProvider with the delegate/Func<T> syntax to populate the cache, this delegate method will get executed every single time. For example, when the cache is disabled, the following delegate/Func<T> code will be executed every time: var data1 = cacheProvider.Get<SomeData>("cache-key", DateTime.Now.AddHours(1), () => { // With the cache disabled, this data access code is executed every attempt to // get this data via the CacheProvider. var someData = new SomeData() { SomeText = "cache example1", SomeNumber = 1 }; return someData; }); One final note: If you access the cache directly via the ICache instance, instead of the higher level ICacheProvider API, you bypass this setting and still access the underlying cache implementation. Only the ICacheProvider instance observes the IsCacheEnabled setting. Thanks to those individuals who have used this library and provided feedback. Ifyou have any suggestions or ideas, please submit them to the issue register on bitbucket (which is where you can grab all the source code from too)

    Read the article

  • 11.10 desktop alerts (volume change and terminal bell) stopped working but all other audio still works

    - by FlabbergastedPickle
    All, My sound works just fine in 11.10 64-bit install on HP dm1-4050 Sandy Bridge notebook (e.g. audio works in Banshee, flash, games, browser, Thunderbird email notification, etc.), but the core desktop notifications (e.g. pressing a tab in a terminal where there is more than one option should trigger a terminal bell, or changing volume using volume keys should be accompanied with the supporting "quack" that the volume app makes) do not work. I've intentionally disabled login sound as explained here on ask ubuntu but even enabling it back makes no difference. These notifications did work before just fine and I am not sure when did the actually stop working but it must've been fairly recently. Only things I did were trying to install some ppa edge xorg drivers for my intel card (a separate issue) but also reverted them all with ppa-purge once I discovered they did not improve anything. Other thing I did was check volume settings with alsamixer and did alsactl store for the soundcard after I did some experimenting with volume settings for PCM (on my laptop PCM at 100% crackles so I had to lower it and make pulseaudio ignore its setting as per ask ubuntu's page). That said, neither of these should have any bearing on the said notifications since the volume is up and they clearly work everywhere else but the core desktop events. The system ready drum sound when Ubuntu boots and user reaches the login screen also does not work. The guest login behaves exactly same as mine. Audio works (including the login sound since I've not disabled it for the guest account), but no quacks when changing the volume or terminal bell sounds... I've tried copying ubuntu sounds to /usr/share/sounds/ as suggested on ask ubuntu and that did not work. I also tried using dconf-editor to check sound theme settings and tried both freedesktop (which is what it was set to) and ubuntu, as suggested on ask ubuntu. This did not work either. I tried purging the ~/.pulse folder and the /tmp/*pulse* entries, rebooting and restarting pulseaudio with -D flag. While audio came back on and behaved just fine in all aspects (e.g. one can adjust volume levels, play music, games, in-browser sound stuff, and other app alerts) except for the system ready drum sound (at the login screen), and any system event (terminal bell and volume change quack sound). It is interesting that the quack sound works inside system settings-sound when adjusting levels there, but it does not when volume is changed via top bar's volume settings... I do recall that at one point yesterday when I was restarting pulseaudio the quacks that accompany volume change did start working but I have no idea what caused that. This was also when I first realized those alerts were not working. After rebooting it was again gone. I did compile my own 3.0.14-rt31 kernel a little while ago as instructed on one of the wiki's for the 11.10 rt kernel. Everything works as before except for the said sound alerts. I am not sure if this began happening since I started using the rt kernel though and yesterday's momentary ability to hear those quacks while changing the volume make me believe that the kernel is not one responsible for this problem. One more thing I can think of is that I used alsoft-conf tool to configure buffering on the OpenAL (due to TA Spring's choppy audio) and changed in there default audio device to ALSA. I also tried reverting it to Pulseaudio as the only allowed output but the bottom part of the Backend tab always reverts to ALSA even when I select Pulseaudio. The pulseaudio does remain as the only active choice on top. This, however, once again does not make any sense in terms of preventing desktop audio alerts when everything else including OpenAL games plays sound just fine... So, there you have it, as verbose as I could make it :-). I tried all I could find on this issue and had no luck so far... Any ideas?

    Read the article

  • Synchronous Actions

    - by Dan Krasinski-Oracle
    Since the introduction of SMF, svcadm(1M) has had the ability to enable or disable a service instance and wait for that service instance to reach a final state.  With Oracle Solaris 11.2, we’ve expanded the set of administrative actions which can be invoked synchronously. Now all subcommands of svcadm(1M) have synchronous behavior. Let’s take a look at the new usage: Usage: svcadm [-v] [cmd [args ... ]] svcadm enable [-rt] [-s [-T timeout]] <service> ... enable and online service(s) svcadm disable [-t] [-s [-T timeout]] <service> ... disable and offline service(s) svcadm restart [-s [-T timeout]] <service> ... restart specified service(s) svcadm refresh [-s [-T timeout]] <service> ... re-read service configuration svcadm mark [-It] [-s [-T timeout]] <state> <service> ... set maintenance state svcadm clear [-s [-T timeout]] <service> ... clear maintenance state svcadm milestone [-d] [-s [-T timeout]] <milestone> advance to a service milestone svcadm delegate [-s] <restarter> <svc> ... delegate service to a restarter As you can see, each subcommand now has a ‘-s’ flag. That flag tells svcadm(1M) to wait for the subcommand to complete before returning. For enables, that means waiting until the instance is either ‘online’ or in the ‘maintenance’ state. For disable, the instance must reach the ‘disabled’ state. Other subcommands complete when: restart A restart is considered complete once the instance has gone offline after running the ‘stop’ method, and then has either returned to the ‘online’ state or has entered the ‘maintenance’ state. refresh If an instance is in the ‘online’ state, a refresh is considered complete once the ‘refresh’ method for the instance has finished. mark maintenance Marking an instance for maintenance completes when the instance has reached the ‘maintenance’ state. mark degraded Marking an instance as degraded completes when the instance has reached the ‘degraded’ state from the ‘online’ state. milestone A milestone transition can occur in one of two directions. Either the transition moves from a lower milestone to a higher one, or from a higher one to a lower one. When moving to a higher milestone, the transition is considered complete when the instance representing that milestone reaches the ‘online’ state. The transition to a lower milestone, on the other hand, completes only when all instances which are part of higher milestones have reached the ‘disabled’ state. That’s not the whole story. svcadm(1M) will also try to determine if the actions initiated by a particular subcommand cannot complete. Trying to enable an instance which does not have its dependencies satisfied, for example, will cause svcadm(1M) to terminate before that instance reaches the ‘online’ state. You’ll also notice the optional ‘-T’ flag which can be used in conjunction with the ‘-s’ flag. This flag sets a timeout, in seconds, after which svcadm gives up on waiting for the subcommand to complete and terminates. This is useful in many cases, but in particular when the start method for an instance has an infinite timeout but might get stuck waiting for some resource that may never become available. For the C-oriented, each of these administrative actions has a corresponding function in libscf(3SCF), with names like smf_enable_instance_synchronous(3SCF) and smf_restart_instance_synchronous(3SCF).  Take a look at smf_enable_instance_synchronous(3SCF) for details.

    Read the article

  • Upgrade to Xubuntu 13.10 - Saucy Salamander

    As a common 'fashion' it is possible to upgrade an existing installation of Ubuntu or one of its derivates every six months. Of course, you might opt-in for the adventure and directly keep your system always on the latest version (including alphas and betas), or you might like to play safe and stay on the long-term support (LTS) versions which are updated every two years only. As for me, I'd like to jump from release to release on my main desktop machine. And since 17th October Saucy Salamander or also known as Ubuntu 13.10 has been released for general use. The following paragraphs document the steps I went in order to upgrade my system to the recent version. Don't worry about the fact that I'm actually using Xubuntu. It's mainly a flavoured version of Ubuntu running Xfce 4.10 as default X Window manager. Well, I have Gnome and LXDE on the same system... just out of couriosity. Preparing the system Before you think about upgrading you have to ensure that your current system is running on the latest packages. This can be done easily via a terminal like so: $ sudo apt-get update && sudo apt-get -y dist-upgrade --fix-missing Next, we are going to initiate the upgrade itself: $ sudo update-manager As a result the graphical Software Updater should inform you that a newer version of Ubuntu is available for installation. Ubuntu's Software Updater informs you whether an upgrade is available Running the upgrade After clicking 'Upgrade...' you will be presented with information about the new version. Details about Ubuntu 13.10 (Saucy Salamander) Simply continue with the procedure and your system will be analysed for the next steps. Analysing the existing system and preparing the actual upgrade to 13.10 Next, we are at the point of no return. Last confirmation dialog before having a coffee break while your machine is occupied to download the necessary packages. Not the best bandwidth at hand after all... yours might be faster. Are you really sure that you want to start the upgrade? Let's go and have fun! Anyway, bye bye Raring Ringtail and Welcome Saucy Salamander! In case that you added any additional repositories like Medibuntu or PPAs you will be informed that they are going to be disabled during the upgrade and they might require some manual intervention after completion. Ubuntu is playing safe and third party repositories are disabled during the upgrade Well, depending on your internet bandwidth this might take something between a couple of minutes and some hours to download all the packages and then trigger the actual installation process. In my case I left my PC unattended during the night. Time to reboot Finally, it's time to restart your system and see what's going to happen... In my case absolutely nothing unexpected. The system booted the new kernel 3.11.0 as usual and I was greeted by a new login screen. Honestly, 'same' system as before - which is good and I love that fact of consistency - and I can continue to work productively. And also Software Updater confirms that we just had a painless upgrade: System is running Ubuntu 13.10 - Saucy Salamander - and up to date See you in six months again... ;-) Post-scriptum In case that you would to upgrade to the latest development version of Ubuntu, run the following command in a console: $ sudo update-manager -d And repeat all steps as described above.

    Read the article

  • Asus X202e VivoBook, dual boot. How to get around UEFI and have Win8 & Ubuntu?

    - by Nukeface
    I've gotten my hands on an Asus Vivobook X202e. I like it, handy to use, small, etc etc. Oh, it's the i3 core version. For school I still need Windows * sigh * for the .NET development. (I know, possible in Ubuntu, this n that, but for ease atm wanting to keep it with Win8). So. How to install both on this little thing? I've found a way into the BIOS (before splash screen, mash F2. Works only after reboot, not cold boot). But the whole boot loading setup is different than from what I know, and I must've messed up something because it's been "Attempting Repairs", "Analyzing hard disk", and a bunch of other things for the past 15 minutes. (All I've done is selected "disabled" on secure boot, picky as ** Microsoft). Keeping the original Windows installation is of no concern. Found the product key already and have a clean install waiting. BTW, not trying to leech knowledge, even though first question and no answers. I'm more and more active on Stackoverflow. But, especially due to secure boot and windows 8, I'm going over to Ubuntu. Well, more and more anyway, I like my Windows based games as well ;) UPDATE Managed to do a clean install of Windows 8 Pro. After disabling Secure Boot, also had to disable fast boot, and enable Launch CSM, leaving the option which appeared (Launch PXE OpROM) disabled. Then I rebooted, with the USB Boot drive I created using the Windows 7 USB DVD Download Tool (scroll down for download link), provided by Microsoft. During the installation, I chose to install a clean version, therefor deleted the partitions containing current windows files. I left the Recovery partition (you never know...). Of course, the new Windows Installation dit not like this. Apparantly Windows cannot be installed on a GPT hard disk. Remember I hadn't changed the partition table, was still factory default! Minus a few partitions, granted. So deleted ALL partittions, did a format of the disk, created a new partition. Et voila, Windows installation started. FINALLY! WONDROUS After the installation, Windows still had background images located in C:/Users/ ME /AppData/Local/Microsoft/Themes/RoamedThemeFiles/DesktopBackground/ that I had in the previous installation. Before doing: format, delete partition, cascade partitions, create new partition of different size, format partition, install Windows. It managed to keep the images through all that. Anyone got an idea on that one? It also remembered the settings for the Windows Aero theme... UPDATED QUESTION: After all this you'd think I'd have the rest figured out. Wrong. Ubuntu 12.10, 64 bit installation can't read the partitioning of the hdd during the installation. Any ideas on how to fix this so the install for a dual-boot system can proceed? (Preferably without starting anew with Windows as well ;) )

    Read the article

  • Problem with addDisplayGroup in the Zend Form

    - by ulduz114
    Hi all, I have a form same the following code: public function init(){ $id=$this->createElement('hidden','cf_id'); $id->setDecorators($this->elementDecorators); $id->setOrder(1); $this->addElement($id); $firstName=$this->createElement('text','firstName'); $firstName->setDecorators($this->elementDecorators); $firstName->setLabel('name :'); $firstName->setOrder(2); $firstName->setAttrib('class','textbox'); $firstName->setAttrib('disabled',true); $this->addElement($firstName); $lastname=$this->createElement('text','family'); $lastname->setLabel(' family:'); $lastname->setDecorators($this->elementDecorators); $lastname->setOrder(3); $lastname->setAttrib('class','textbox'); $lastname->setAttrib('disabled',true); $this->addElement($lastname); $this->addElement('button', 'cancel', array( 'label' => 'Cancel Button', 'class'=>'button', 'decorators' => array( 'ViewHelper', ), )); $this->addElement('button', 'submit', array( 'label' => 'Submit Button', 'class'=>'button', 'decorators' => array( 'ViewHelper', ), )); $this->addDisplayGroup(array('submit', 'cancel',), 'submitButtons', array( 'order'=>4, 'decorators' => array( 'FormElements', array('HtmlTag', array('tag' => 'div', 'class' => 'element')), ), )); } In this form there are some elements and two buttons. In display page, the buttons are shown above form before other elements. How can I put these buttons at the bottom of all elemnts? Thanks.

    Read the article

  • How do I stop inheritance in xaml?

    - by cfouche
    Hi Let's say I have some Control that has been disabled. It contains a bunch of elements, but I want one of those child elements to remain enabled. Something like this: <ContentControl IsEnabled="False"> <Border> <Button Content="Button" IsEnabled="True"/> </Border> </ContentControl> So in this example, the Button's IsEnabled="True" setting gets overridden by its parent. Is there a way of stopping this from happening? This seems like a strange thing to be doing, but I have a situation where, when a Control is disabled and a user mouses down on it, I still want an event to be triggered. I read in WPF Unleashed that wrapping something in a Frame control, "..isolates the content from the rest of the UI [and] properties that would normally be inherited down the element tree stop when they reach the Frame", but wrapping the Button in the example above in a Frame doesn't work. Am I on the wrong track here?

    Read the article

  • Paypal subscriptions IPN - problem with users subscribing multiple times

    - by Brian Armstrong
    I'm using paypal subscriptions and the instant payment notification (IPN) to handle subscribers on my site. For the most part it works well but there is one occasional problem I've encountered. Usually if a user cancels their subscription, I wait for the "end of term" (subscr_eot) notification before disabling access to my site. So if they prepay for the whole month, and then cancel right away, they still have access for the rest of the month (as it should be). But some users are having this problem where they: Cancel their subscription Before the "end of term" is reached they decide to re-subscribe When the "end of term" is reached for their first subscription, my app receives the notification and fires off an email to the user with something like "your account has been disabled, if you ever want to sign up again, you can re-subscribe by clicking here". This confuses them because they are thinking...that's weird, I thought I subscribed like a week ago (and they did). So they go subscribe AGAIN. Now they have two concurrent running subscriptions to my site and I get a support email in a month or two ("wtf you billed me twice this month jerk!!") So I haven't found a good way to fix this. I guess the best solution would be to do an additional API call when the "end of term" notification is received which asks paypal "hey did this person already re-subscribe?". If so then no need to fire off that email. But I haven't seen any way to do this API call yet. Another solution is to disable their account immediately when they cancel (the "subscr_cancel" notification) but then I get different angry support emails "hey I prepaid for the whole month why was my account disabled already!!". Anyone else solved this?

    Read the article

  • Why unchecked jQuery UI radio button's label appears "checked" after refresh in FF and IE?

    - by Daj pan spokój
    I've got 2 radio buttons with labels: button A is checked by default in HTML (checked="checked"). They're then processed with jQuery UI Radio Button. When I check button B and refresh the page, B's label is displayed as checked (it has CSS ui-state-active class). And A's label is displayed as unchecked, even though it's A button that is actually checked. It happens in Firefox (3) and IE (8). In Chrome (5) it works fine - after refresh A's label is displayed as checked. <input class="ui-helper-hidden-accessible" id="show-all-hotels" name="radio" CHECKED="CHECKED" type="radio"> <label aria-disabled="false" role="button" class="ui-button ui-widget ui-state-default ui-button-text-only ui-corner-left" aria-pressed="false" for="show-all-hotels"> <span class="ui-button-text">All tours</span> </label> <input class="ui-helper-hidden-accessible" id="show-availability" name="radio" type="radio"> <label aria-disabled="false" role="button" aria-pressed="true" class="UI-STATE-ACTIVE ui-button ui-widget ui-state-default ui-button-text-only ui-corner-right" for="show-availability"> <span class="ui-button-text">Only available at</span> </label> Do You know why is it happening and how to make checked button label appear as checked in all browsers?

    Read the article

  • Jquery Form ajaxSubmit not submitting

    - by Gazler
    Hi, I am using the JQuery Form extension to submit a form with AJAX. I have the following code: var options = { beforeSubmit: showRequest, // pre-submit callback success: showResponse, // post-submit callback // other available options: //url: url // override for form's 'action' attribute //type: 'post', // 'get' or 'post', override for form's 'method' attribute //dataType: null // 'xml', 'script', or 'json' (expected server response type) clearForm: true, // clear all form fields after successful submit //resetForm: true // reset the form after successful submit // $.ajax options can be used here too, for example: timeout: 3000 }; $('#composeForm').submit(function() { // inside event callbacks 'this' is the DOM element so we first // wrap it in a jQuery object and then invoke ajaxSubmit $(this).find(':disabled').removeAttr('disabled'); $(this).ajaxSubmit(options); // !!! Important !!! // always return false to prevent standard browser submit and page navigation return false; }); The problem is that the form doesn't appear to be submitting, or atleast the success function is not being called. If I remove the return false, then the submission works, but the page navigates away. Is there a problem in my code that could be causing this? Cheers, Gazler.

    Read the article

  • How to avoid double divide in loop?

    - by ignaty
    Thank you for your help. My code looks like: var CatItems = ""; for(var x=0; x < data.PRODUCTS.length; x++) { if (x % 3 === 0) CatItems += '<li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-'+[x]+' jcarousel-item-'+[x]+'-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal">'; CatItems += '<div><a class="large_image" href="#"><img src="'+ data.PRODUCTS[x].product_img +'" alt="' + data.PRODUCTS[x].product_name +'"></a><h3 class="geo_17_darkbrown">' + data.PRODUCTS[x].product_name +'</h3>'; if ( data.PRODUCTS[x].product_onsale==1 ) { CatItems += '<img alt="sale" src="assets/images/sale.gif" class="sale"><span class="geo_17_red_linethr">&pound;'+ data.PRODUCTS[x].product_retailprice +'</span>&nbsp;&nbsp;<span class="price geo_17_darkbrown">&pound;'+ data.PRODUCTS[x].product_webprice +'</span>'; } else { CatItems += '<span class="price geo_17_darkbrown">&pound;'+ data.PRODUCTS[x].product_webprice +'</span>'; } if ( data.PRODUCTS[x].product_COLOURS ) { CatItems += '<span class="colour">'; for(var y=0; y < data.PRODUCTS[x].product_COLOURS.length; y++) { CatItems += '<span><a href="'+ data.PRODUCTS[x].product_COLOURS[y].colours_large +'"><img src="'+ data.PRODUCTS[x].product_COLOURS[y].colours_thumb +'" alt="'+ data.PRODUCTS[x].product_COLOURS[y].colour_name +'" /></a></span>'; } CatItems += '</span>'; } CatItems += '</div>'; if (x % 3 === 2) CatItems += '</li>'; } and it generates this: <div class="carousel_00 jcarousel-container jcarousel-container-horizontal" style="position: relative; display: block;"> <div class="jcarousel-clip jcarousel-clip-horizontal" style="overflow: hidden; position: relative;"> <ul class="jcarousel-list jcarousel-list-horizontal" style="overflow: hidden; position: relative; top: 0px; left: 0px; margin: 0px; padding: 0px; width: 7890px;"> <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-0 jcarousel-item-0-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress1.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <img class="sale" src="assets/images/sale.gif" alt="sale"> <span class="geo_17_red_linethr">£120 </span>&nbsp;&nbsp; <span class="price geo_17_darkbrown">£100 </span> <span class="colour"> <span> <a href="assets/images/colour.gif"> <img alt="Black" src="assets/images/black.gif"></a> </span> <span> <a href="assets/images/colour.gif"> <img alt="Brown" src="assets/images/brown.gif"></a> </span> <span> <a href="assets/images/colour.gif"> <img alt="Purple" src="assets/images/purple.gif"></a> </span> </span> </div> <div> <a href="#" class="large_image"> <img alt="Rachel Dress" src="assets/images/dress2.gif"></a> <h3 class="geo_17_darkbrown">Rachel Dress</h3> <span class="price geo_17_darkbrown">£120 </span> </div> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress3.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <span class="price geo_17_darkbrown">£120 </span> </div> </li> <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-1 jcarousel-item-1-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal" style="float: left; list-style: none outside none;" jcarouselindex="1"> </li> <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-3 jcarousel-item-3-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress1.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <span class="price geo_17_darkbrown">£120 </span> </div> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress2.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <span class="price geo_17_darkbrown">£120 </span> </div> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress3.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <span class="price geo_17_darkbrown">£120 </span> </div> </li> <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-6 jcarousel-item-6-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress3.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <span class="price geo_17_darkbrown">£120 </span> </div> <div> <a href="#" class="large_image"> <img alt="Elena Top" src="assets/images/dress3.gif"></a> <h3 class="geo_17_darkbrown">Elena Top</h3> <span class="price geo_17_darkbrown">£120 </span> </div> </li> </ul> </div> <div class="jcarousel-prev jcarousel-prev-horizontal jcarousel-prev-disabled jcarousel-prev-disabled-horizontal" style="display: block;" disabled="true"> </div> <div class="jcarousel-next jcarousel-next-horizontal" style="display: block;" disabled="false"> </div> <div class="jcarousel-control geo_10_darkbrown_capital"> 7 products&nbsp;&nbsp;&nbsp; <a href="#">1</a> <a href="#">2</a> <a href="#">3</a> <a href="#">4</a> <a href="#">5</a> <a href="#">6</a> <a href="#" class="last">7</a> </div> </div> It works like it should, put every 3 div's in li. but I have another problem with divide. It divide "x" inside the loop. For example in JS: <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-'+[x]+' jcarousel-item-'+[x]+'-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"> And HTML out is: <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-0 jcarousel-item-0-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"></li> then <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-3 jcarousel-item-3-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"></li> then <li class="jcarousel-item jcarousel-item-horizontal jcarousel-item-6 jcarousel-item-6-horizontal jcarousel-item-placeholder jcarousel-item-placeholder-horizontal"></li> etc... What I need is that count goes as 0-1-2-3-4-5-etc, but with divide it goes 0-3-6-etc and jCarousel insert blank li's 1-2, 4-5, 7-8. How I can avoid "x" divide inside the loop? Tnak you!

    Read the article

  • ajax error when calling from javascript

    - by vikitor
    Hi, I' still newby to this so I'll try to explain what I'm doing. Basically what I want is to load a dropdownlist depending on the value of a previous one, and I want it to load the data and appear when the other one is changed. This is the code I've written in my controller: public ActionResult GetClassesSearch(bool ajax, string phylumID, string kingdom){ IList<TaxClass> lists = null; int _phylumID = int.Parse(phylumID); int _kingdom = int.Parse(kingdom); lists = _taxon.getClassByPhylumSearch(_phylumID, _kingdom); return Json(lists); } and this is how I call the method from the javascript function: function loadClasses(_phylum) { var phylum = _phylum.value; $.getJSON("/Suspension/GetClassesSearch", { ajax: true, classID: phylum, kingdom: kingdom }, }, function(data) { $('#sClass').attr("disabled", true); $('#sClass').selectOptions("-2"); $('#sClass').removeOption(/./); var values = ''; $('#sClass').addOption("-2", "-Select All-"); for (i = 0; i < data.length; i++) { $('#sClass').addOption(data[i].RecId, data[i].TaxonName); } $('#sClass').selectOptions("-2"); $('#sClass').removeAttr("disabled"); }); } I can't get it to work. Any tips? Thanks in advance

    Read the article

  • JAXB boolean handling oddities and JSF

    - by finrod
    There is a known bug in JAXB: https://jaxb.dev.java.net/issues/show_bug.cgi?id=733 JAXB does not properly generate boolean field getters and setters, this bug is left unfixed for backwards compatibility. A JAXB plugin exists and will ensure that the following getters and setters for boolean fields are generated: setXXX(Boolean value) is generated getXXX() is generated If the boolean attribute specifies default value in the XSD, then getXXX() returns boolean, If the boolean attribute does not specify default in the XSD, then getXXX() returns Boolean. Problem: trying to edit/view the XXX field in a JSF component (such as checkbox) does not work - the component is disabled. I have not traced this in depth but the assumption (backed by the workaround below) is that JSF EL resolver (or whathaveyou) looks for Boolean getXXX() method and since it does not find it, the component is disabled. Workaround: If I change the getXXX() method to always return Boolean, then everything goes. Questions: What are your ideas to address this problem? Have I missed some customization for the boolean-getter JAXB plugin? Is it possible (does it make sense) to alter JSF resolver (or whathaveyou) so that if Boolean getXXX() is not found, it will fall back to boolean getXXX()? I would prefer not to manually intervene and change all the generated getXXX() methods to return Boolean instead of boolean.

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >