Search Results

Search found 6679 results on 268 pages for 'echo'.

Page 43/268 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Unison synchronization problem. Roots are not identical after synchronization.

  - by binary255

  Hi. When I synchronize two folders using Unison, only one of the roots seems to be affected. Below are all the information I would think is necessary to figure out why it is working like it is. I'm using $ unison -version unison version 2.27.57 From the Ubuntu repositories. My work laptop: $ echo $UNISONLOCALHOSTNAME worklaptop $ pwd /home/userfoo $ ls -lAR .unison* .unison: total 8 drwxr-xr-x 2 userfoo userfoo 4096 2010-04-26 11:39 backups -rw-r--r-- 1 userfoo userfoo 231 2010-04-26 11:38 default.prf .unison/backups: total 0 .unisonroot: total 0 $ cat .unison/default.prf # Roots of the synchronization root = /home/userfoo/.unisonroot root = ssh://devel//home/userbar/.unisonroot path = * backuplocation = central backupdir = /home/.unison/backups backupprefix = $VERSION.bak $ mkdir .unisonroot/aDirectoryFrom-$UNISONLOCALHOSTNAME $ echo something >.unisonroot/aFileFrom-$UNISONLOCALHOSTNAME $ ls .unisonroot/ aDirectoryFrom-worklaptop aFileFrom-worklaptop And the Ubuntu server I want to synchronize with: $ echo $UNISONLOCALHOSTNAME workcmpuserbardevel $ pwd /home/userbar $ ls -lAR .unison* .unison: total 4 drwxr-xr-x 2 userbar userbar 4096 2010-04-26 11:38 .unison .unison/.unison: total 0 .unisonroot: total 0 $ mkdir .unisonroot/aDirectoryFrom-$UNISONLOCALHOSTNAME $ echo something >.unisonroot/aFileFrom-$UNISONLOCALHOSTNAME $ ls .unisonroot/ aDirectoryFrom-workcmpuserbardevel aFileFrom-workcmpuserbardevel I perform the unison synchronization: $ echo $UNISONLOCALHOSTNAME worklaptop $ unison Contacting server... Connected [//worklaptop//home/userfoo/.unisonroot -> //workcmpuserbardevel//home/userbar/.unisonroot] Looking for changes Warning: No archive files were found for these roots, whose canonical names are: /home/userfoo/.unisonroot //workcmpuserbardevel//home/userbar/.unisonroot This can happen either because this is the first time you have synchronized these roots, or because you have upgraded Unison to a new version with a different archive format. Update detection may take a while on this run if the replicas are large. Unison will assume that the 'last synchronized state' of both replicas was completely empty. This means that any files that are different will be reported as conflicts, and any files that exist only on one replica will be judged as new and propagated to the other replica. If the two replicas are identical, then no changes will be reported. If you see this message repeatedly, it may be because one of your machines is getting its address from DHCP, which is causing its host name to change between synchronizations. See the documentation for the UNISONLOCALHOSTNAME environment variable for advice on how to correct this. Donations to the Unison project are gratefully accepted: http://www.cis.upenn.edu/~bcpierce/unison Press return to continue.[<spc>] Waiting for changes from server Reconciling changes local workcmps... dir ----> aDirectoryFrom-worklaptop [f] file ----> aFileFrom-worklaptop [f] Proceed with propagating updates? [] y Propagating updates UNISON 2.27.57 started propagating changes at 11:49:14 on 26 Apr 2010 [BGN] Copying aDirectoryFrom-worklaptop from /home/userfoo/.unisonroot to //workcmpuserbardevel//home/userbar/.unisonroot [BGN] Copying aFileFrom-worklaptop from /home/userfoo/.unisonroot to //workcmpuserbardevel//home/userbar/.unisonroot [END] Copying aDirectoryFrom-worklaptop [END] Copying aFileFrom-worklaptop UNISON 2.27.57 finished propagating changes at 11:49:14 on 26 Apr 2010 Saving synchronizer state Synchronization complete (2 items transferred, 0 skipped, 0 failures) And then check the .unisonroot directory on the computer I started the synchronization from: $ ls .unisonroot/ aDirectoryFrom-worklaptop aFileFrom-worklaptop And on the server: $ echo $UNISONLOCALHOSTNAME workcmpuserbardevel $ ls .unisonroot/ aDirectoryFrom-worklaptop aFileFrom-worklaptop aDirectoryFrom-workcmpuserbardevel aFileFrom-workcmpuserbardevel As can be seen above, the contents of the laptop .unisonroot has not changed while the servers .unisonroot has. The desired result would have been that the two folders would have ended up being identical, holding the union of the contents of the two roots.

  Read the article

• How do I configure Apache 2.2 to Run Background PHP Processes on Win 2003?

  - by Captain Obvious

  I have a script, testforeground.php, that kicks off a background script, testbackground.php, then returns while the background script continues to run until it's finished. Both the foreground and background scripts write to the output file correctly when I run the foreground script from the command line using php-cgi: C:\>php-cgi testforeground.php The above command starts a php-cgi.exe process, then a php-win.exe process, then closes the php-cgi.exe almost immediately, while the php-win.exe continues until it's finished. The same script runs correctly but does not have permission to write to the output file when I run it from the command line using plain php: C:\>php testforeground.php AND when I run the same script from the browser, instead of php-cgi.exe, a single cmd.exe process opens and closes almost instantly, only the foreground script writes to the output file, and it doesn't appear that the 2nd process starts: http://XXX/testforeground.php Here is the server info: OS: Win 2003 32-bit HTTP: Apache 2.2.11 PHP: 5.2.13 Loaded Modules: core mod_win32 mpm_winnt http_core mod_so mod_actions mod_alias mod_asis mod_auth_basic mod_authn_default mod_authn_file mod_authz_default mod_authz_groupfile mod_authz_host mod_authz_user mod_autoindex mod_cgi mod_dir mod_env mod_include mod_isapi mod_log_config mod_mime mod_negotiation mod_setenvif mod_userdir mod_php5 Here's the foreground script: <?php ini_set("display_errors",1); error_reporting(E_ALL); echo "<pre>loading page</pre>"; function run_background_process() { file_put_contents("0testprocesses.txt","foreground start time = " . time() . "\n"); echo "<pre> foreground start time = " . time() . "</pre>"; $command = "start /B \"{$_SERVER['CMS_PHP_HOMEPATH']}\php-cgi.exe\" {$_SERVER['CMS_HOMEPATH']}/testbackground.php"; $rp = popen($command, 'r'); if(isset($rp)) { pclose($rp); } echo "<pre> foreground end time = " . time() . "</pre>"; file_put_contents("0testprocesses.txt","foreground end time = " . time() . "\n", FILE_APPEND); return true; } echo "<pre>calling run_background_process</pre>"; $output = run_background_process(); echo "<pre>output = $output</pre>"; echo "<pre>end of page</pre>"; ?> And the background script: <?php $start = "background start time = " . time() . "\n"; file_put_contents("0testprocesses.txt",$start, FILE_APPEND); sleep(10); $end = "background end time = " . time() . "\n"; file_put_contents("0testprocesses.txt", $end, FILE_APPEND); ?> I've confirmed that the above scripts work correctly using Apache 2.2.3 on Linux. I'm sure I just need to change some Apache and/or PHP config settings, but I'm not sure which ones. I've been muddling over this for too long already, so any help would be appreciated.

  Read the article

• OpenVPN - client-to-client traffic working in one direction but not the other

  - by user42055

  I have the following VPN configuration: +------------+ +------------+ +------------+ | outpost |----------------| kino |----------------| guchuko | +------------+ +------------+ +------------+ OS: FreeBSD 6.2 OS: Gentoo 2.6.32 OS: Gentoo 2.6.33.3 Keyname: client3 Keyname: server Keyname: client1 eth0: 10.0.1.254 eth0: 203.x.x.x eth0: 192.168.0.6 tun0: 192.168.150.18 tun0: 192.168.150.1 tun0: 192.168.150.10 P-t-P: 192.166.150.17 P-t-P: 192.168.150.2 P-t-P: 192.168.150.9 Kino is the server and has client-to-client enabled. All three machines have ip forwarding enabled, by this on the gentoo boxes: net.ipv4.conf.all.forwarding = 1 And this on the FreeBSD box: net.inet.ip.forwarding: 1 In the server's "ccd" directory is the following files: client1: iroute 192.168.0.0 255.255.255.0 client3: iroute 10.0.1.0 255.255.255.0 The server config has these routes configured: push "route 192.168.0.0 255.255.255.0" push "route 10.0.1.0 255.255.255.0" route 192.168.0.0 255.255.255.0 route 10.0.1.0 255.255.255.0 Kino's routing table looks like this: 192.168.150.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.0.0 192.168.150.2 255.255.255.0 UG 0 0 0 tun0 192.168.150.2 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Outpost's like this: 192.168.150 192.168.150.17 UGS 0 17 tun0 192.168.0 192.168.150.17 UGS 0 2 tun0 192.168.150.17 192.168.150.18 UH 3 0 tun0 And Guchuko's like this: 192.168.150.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 10.0.1.0 192.168.150.9 255.255.255.0 UG 0 0 0 tun0 192.168.150.9 0.0.0.0 255.255.255.255 UH 0 0 0 tun0 Now, the tests. Pings from Guchuko to Outpost's LAN IP work OK, as does the reverse - pings from Outpost to Guchuko's LAN IP. However... Pings from Outpost, to a machine on Guchuko's LAN work fine: .(( root@outpost )). (( 06:39 PM )) :: ~ :: # ping 192.168.0.3 PING 192.168.0.3 (192.168.0.3): 56 data bytes 64 bytes from 192.168.0.3: icmp_seq=0 ttl=63 time=462.641 ms 64 bytes from 192.168.0.3: icmp_seq=1 ttl=63 time=557.909 ms But a ping from Guchuko, to a machine on Outpost's LAN does not: .(( root@guchuko )). (( 06:43 PM )) :: ~ :: # ping 10.0.1.253 PING 10.0.1.253 (10.0.1.253) 56(84) bytes of data. --- 10.0.1.253 ping statistics --- 3 packets transmitted, 0 received, 100% packet loss, time 2000ms Guchuko's tcpdump of tun0 shows: 18:46:27.716931 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 1, length 64 18:46:28.716715 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 2, length 64 18:46:29.716714 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 Outpost's tcpdump on tun0 shows: 18:44:00.333341 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 3, length 64 18:44:01.334073 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 4, length 64 18:44:02.331849 IP 192.168.150.10 > 10.0.1.253: ICMP echo request, id 63009, seq 5, length 64 So Outpost is receiving the ICMP request destined for the machine on it's subnet, but appears not be forwarding it. Outpost has gateway_enable="YES" in its rc.conf which correctly sets net.inet.ip.forwarding to 1 as mentioned earlier. As far as I know, that's all that's required to make a FreeBSD box forward packets between interfaces. Is there something else I could be forgetting ?

  Read the article

• Router 2wire, Slackware desktop in DMZ mode, iptables policy aginst ping, but still pingable

  - by user135501

  I'm in DMZ mode, so I'm firewalling myself, stealthy all ok, but I get faulty test results from Shields Up that there are pings. Yesterday I couldn't make a connection to game servers work, because ping block was enabled (on the router). I disabled it, but this persists even due to my firewall. What is the connection between me and my router in DMZ mode (for my machine, there is bunch of others too behind router firewall)? When it allows router affecting if I'm pingable or not and if router has setting not blocking ping, rules in my iptables for this scenario do not work. Please ignore commented rules, I do uncomment them as I want. These two should do the job right? iptables -A INPUT -p icmp --icmp-type echo-request -j DROP echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all Here are my iptables: #!/bin/sh # Begin /bin/firewall-start # Insert connection-tracking modules (not needed if built into the kernel). #modprobe ip_tables #modprobe iptable_filter #modprobe ip_conntrack #modprobe ip_conntrack_ftp #modprobe ipt_state #modprobe ipt_LOG # allow local-only connections iptables -A INPUT -i lo -j ACCEPT # free output on any interface to any ip for any service # (equal to -P ACCEPT) iptables -A OUTPUT -j ACCEPT # permit answers on already established connections # and permit new connections related to established ones (eg active-ftp) iptables -A INPUT -m state --state ESTABLISHED,RELATED -j ACCEPT #Gamespy&NWN #iptables -A INPUT -p tcp -m tcp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 6667 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 28910 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29900 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29901 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p tcp -m tcp --dport 29920 --tcp-flags SYN,RST,ACK SYN -j ACCEPT #iptables -A INPUT -p udp -m udp -m multiport --ports 5120:5129 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 6500 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27900 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 27901 -j ACCEPT #iptables -A INPUT -p udp -m udp --dport 29910 -j ACCEPT # Log everything else: What's Windows' latest exploitable vulnerability? iptables -A INPUT -j LOG --log-prefix "FIREWALL:INPUT" # set a sane policy: everything not accepted > /dev/null iptables -P INPUT DROP iptables -P FORWARD DROP iptables -P OUTPUT DROP iptables -A INPUT -p icmp --icmp-type echo-request -j DROP # be verbose on dynamic ip-addresses (not needed in case of static IP) echo 2 > /proc/sys/net/ipv4/ip_dynaddr # disable ExplicitCongestionNotification - too many routers are still # ignorant echo 0 > /proc/sys/net/ipv4/tcp_ecn #ping death echo 1 > /proc/sys/net/ipv4/icmp_echo_ignore_all # If you are frequently accessing ftp-servers or enjoy chatting you might # notice certain delays because some implementations of these daemons have # the feature of querying an identd on your box for your username for # logging. Although there's really no harm in this, having an identd # running is not recommended because some implementations are known to be # vulnerable. # To avoid these delays you could reject the requests with a 'tcp-reset': #iptables -A INPUT -p tcp --dport 113 -j REJECT --reject-with tcp-reset #iptables -A OUTPUT -p tcp --sport 113 -m state --state RELATED -j ACCEPT # To log and drop invalid packets, mostly harmless packets that came in # after netfilter's timeout, sometimes scans: #iptables -I INPUT 1 -p tcp -m state --state INVALID -j LOG --log-prefix \ "FIREWALL:INVALID" #iptables -I INPUT 2 -p tcp -m state --state INVALID -j DROP # End /bin/firewall-start

  Read the article

• Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there?

  - by jasonspiro

  A client of my IT-consulting service owns a web-development shop. He's been having problems with a Slackware 12.0 server running MySQL 5.0.67. The machine was set up by the client's sysadmin, who left on bad terms. My client no longer employs a sysadmin. As far as I can tell, the only copy of MySQL that's installed is the one described in /var/log/packages/mysql-5.0.67-i486-1: PACKAGE NAME: mysql-5.0.67-i486-1 COMPRESSED PACKAGE SIZE: 16828 K UNCOMPRESSED PACKAGE SIZE: 33840 K PACKAGE LOCATION: /var/slapt-get/archives/./slackware/ap/mysql-5.0.67-i486-1.tgz PACKAGE DESCRIPTION: mysql: mysql (SQL-based relational database server) mysql: mysql: MySQL is a fast, multi-threaded, multi-user, and robust SQL mysql: (Structured Query Language) database server. It comes with a nice API mysql: which makes it easy to integrate into other applications. mysql: mysql: The home page for MySQL is http://www.mysql.com/ mysql: mysql: mysql: mysql: FILE LIST: ./ var/ var/lib/ var/lib/mysql/ var/run/ var/run/mysql/ install/ install/doinst.sh install/slack-desc usr/ usr/include/ usr/include/mysql/ usr/include/mysql/my_alloc.h usr/include/mysql/sql_common.h usr/include/mysql/my_dbug.h usr/include/mysql/errmsg.h usr/include/mysql/my_pthread.h usr/include/mysql/my_list.h usr/include/mysql/mysql.h usr/include/mysql/sslopt-vars.h usr/include/mysql/my_config.h usr/include/mysql/mysql_com.h usr/include/mysql/m_string.h usr/include/mysql/sslopt-case.h usr/include/mysql/my_xml.h usr/include/mysql/sql_state.h usr/include/mysql/my_global.h usr/include/mysql/my_sys.h usr/include/mysql/mysqld_ername.h usr/include/mysql/mysqld_error.h usr/include/mysql/sslopt-longopts.h usr/include/mysql/keycache.h usr/include/mysql/my_net.h usr/include/mysql/mysql_version.h usr/include/mysql/my_no_pthread.h usr/include/mysql/decimal.h usr/include/mysql/readline.h usr/include/mysql/my_attribute.h usr/include/mysql/typelib.h usr/include/mysql/my_dir.h usr/include/mysql/raid.h usr/include/mysql/m_ctype.h usr/include/mysql/mysql_embed.h usr/include/mysql/mysql_time.h usr/include/mysql/my_getopt.h usr/lib/ usr/lib/mysql/ usr/lib/mysql/libmysqlclient_r.so.15.0.0 usr/lib/mysql/libmysqlclient_r.la usr/lib/mysql/libmyisammrg.a usr/lib/mysql/libmystrings.a usr/lib/mysql/libmyisam.a usr/lib/mysql/libmysqlclient.so.15.0.0 usr/lib/mysql/libmysqlclient_r.a usr/lib/mysql/libmysqlclient.a usr/lib/mysql/libheap.a usr/lib/mysql/libvio.a usr/lib/mysql/libmysqlclient.la usr/lib/mysql/libmysys.a usr/lib/mysql/libdbug.a usr/bin/ usr/bin/comp_err usr/bin/my_print_defaults usr/bin/resolve_stack_dump usr/bin/msql2mysql usr/bin/mysqltestmanager-pwgen usr/bin/myisampack usr/bin/replace usr/bin/mysqld_multi usr/bin/mysqlaccess usr/bin/mysql_install_db usr/bin/innochecksum usr/bin/myisam_ftdump usr/bin/mysqlcheck usr/bin/mysqltest usr/bin/mysql_upgrade_shell usr/bin/mysql_secure_installation usr/bin/mysql_fix_extensions usr/bin/mysqld_safe usr/bin/mysql_explain_log usr/bin/mysqlimport usr/bin/myisamlog usr/bin/mysql_tzinfo_to_sql usr/bin/mysql_upgrade usr/bin/mysqltestmanager usr/bin/mysql_fix_privilege_tables usr/bin/mysql_find_rows usr/bin/mysql_convert_table_format usr/bin/mysqltestmanagerc usr/bin/mysqlhotcopy usr/bin/mysqldump usr/bin/mysqlshow usr/bin/mysqlbug usr/bin/mysql_config usr/bin/mysqldumpslow usr/bin/mysql_waitpid usr/bin/mysqlbinlog usr/bin/mysql_client_test usr/bin/perror usr/bin/mysql usr/bin/myisamchk usr/bin/mysql_setpermission usr/bin/mysqladmin usr/bin/mysql_zap usr/bin/mysql_tableinfo usr/bin/resolveip usr/share/ usr/share/mysql/ usr/share/mysql/errmsg.txt usr/share/mysql/swedish/ usr/share/mysql/swedish/errmsg.sys usr/share/mysql/mysql_system_tables_data.sql usr/share/mysql/mysql.server usr/share/mysql/hungarian/ usr/share/mysql/hungarian/errmsg.sys usr/share/mysql/norwegian/ usr/share/mysql/norwegian/errmsg.sys usr/share/mysql/slovak/ usr/share/mysql/slovak/errmsg.sys usr/share/mysql/spanish/ usr/share/mysql/spanish/errmsg.sys usr/share/mysql/polish/ usr/share/mysql/polish/errmsg.sys usr/share/mysql/ukrainian/ usr/share/mysql/ukrainian/errmsg.sys usr/share/mysql/danish/ usr/share/mysql/danish/errmsg.sys usr/share/mysql/romanian/ usr/share/mysql/romanian/errmsg.sys usr/share/mysql/english/ usr/share/mysql/english/errmsg.sys usr/share/mysql/charsets/ usr/share/mysql/charsets/latin2.xml usr/share/mysql/charsets/greek.xml usr/share/mysql/charsets/koi8r.xml usr/share/mysql/charsets/latin1.xml usr/share/mysql/charsets/cp866.xml usr/share/mysql/charsets/geostd8.xml usr/share/mysql/charsets/cp1250.xml usr/share/mysql/charsets/koi8u.xml usr/share/mysql/charsets/cp852.xml usr/share/mysql/charsets/hebrew.xml usr/share/mysql/charsets/latin7.xml usr/share/mysql/charsets/README usr/share/mysql/charsets/ascii.xml usr/share/mysql/charsets/cp1251.xml usr/share/mysql/charsets/macce.xml usr/share/mysql/charsets/latin5.xml usr/share/mysql/charsets/Index.xml usr/share/mysql/charsets/macroman.xml usr/share/mysql/charsets/cp1256.xml usr/share/mysql/charsets/keybcs2.xml usr/share/mysql/charsets/swe7.xml usr/share/mysql/charsets/armscii8.xml usr/share/mysql/charsets/dec8.xml usr/share/mysql/charsets/cp1257.xml usr/share/mysql/charsets/hp8.xml usr/share/mysql/charsets/cp850.xml usr/share/mysql/korean/ usr/share/mysql/korean/errmsg.sys usr/share/mysql/german/ usr/share/mysql/german/errmsg.sys usr/share/mysql/mi_test_all.res usr/share/mysql/greek/ usr/share/mysql/greek/errmsg.sys usr/share/mysql/french/ usr/share/mysql/french/errmsg.sys usr/share/mysql/mysql_fix_privilege_tables.sql usr/share/mysql/dutch/ usr/share/mysql/dutch/errmsg.sys usr/share/mysql/serbian/ usr/share/mysql/serbian/errmsg.sys usr/share/mysql/mysql_system_tables.sql usr/share/mysql/my-huge.cnf usr/share/mysql/portuguese/ usr/share/mysql/portuguese/errmsg.sys usr/share/mysql/japanese/ usr/share/mysql/japanese/errmsg.sys usr/share/mysql/mysql_test_data_timezone.sql usr/share/mysql/russian/ usr/share/mysql/russian/errmsg.sys usr/share/mysql/czech/ usr/share/mysql/czech/errmsg.sys usr/share/mysql/fill_help_tables.sql usr/share/mysql/estonian/ usr/share/mysql/estonian/errmsg.sys usr/share/mysql/my-medium.cnf usr/share/mysql/norwegian-ny/ usr/share/mysql/norwegian-ny/errmsg.sys usr/share/mysql/my-small.cnf usr/share/mysql/mysql-log-rotate usr/share/mysql/italian/ usr/share/mysql/italian/errmsg.sys usr/share/mysql/my-large.cnf usr/share/mysql/ndb-config-2-node.ini usr/share/mysql/binary-configure usr/share/mysql/mi_test_all usr/share/mysql/mysqld_multi.server usr/share/mysql/my-innodb-heavy-4G.cnf usr/doc/ usr/doc/mysql-5.0.67/ usr/doc/mysql-5.0.67/README usr/doc/mysql-5.0.67/Docs/ usr/doc/mysql-5.0.67/Docs/INSTALL-BINARY usr/doc/mysql-5.0.67/COPYING usr/info/ usr/info/mysql.info.gz usr/libexec/ usr/libexec/mysqld usr/libexec/mysqlmanager usr/man/ usr/man/man8/ usr/man/man8/mysqlmanager.8.gz usr/man/man8/mysqld.8.gz usr/man/man1/ usr/man/man1/mysql_zap.1.gz usr/man/man1/mysql_setpermission.1.gz usr/man/man1/mysql_tzinfo_to_sql.1.gz usr/man/man1/msql2mysql.1.gz usr/man/man1/mysql_tableinfo.1.gz usr/man/man1/mysql_explain_log.1.gz usr/man/man1/mysqlcheck.1.gz usr/man/man1/comp_err.1.gz usr/man/man1/my_print_defaults.1.gz usr/man/man1/mysqlbinlog.1.gz usr/man/man1/myisam_ftdump.1.gz usr/man/man1/mysql_upgrade.1.gz usr/man/man1/mysql.1.gz usr/man/man1/mysql_client_test.1.gz usr/man/man1/resolve_stack_dump.1.gz usr/man/man1/mysql_fix_extensions.1.gz usr/man/man1/mysqlmanagerc.1.gz usr/man/man1/mysql_config.1.gz usr/man/man1/mysqlshow.1.gz usr/man/man1/myisamlog.1.gz usr/man/man1/replace.1.gz usr/man/man1/mysqlmanager-pwgen.1.gz usr/man/man1/mysqltest.1.gz usr/man/man1/innochecksum.1.gz usr/man/man1/mysqladmin.1.gz usr/man/man1/perror.1.gz usr/man/man1/mysql_waitpid.1.gz usr/man/man1/mysql_convert_table_format.1.gz usr/man/man1/mysqlman.1.gz usr/man/man1/mysqlimport.1.gz usr/man/man1/mysqlbug.1.gz usr/man/man1/mysql_find_rows.1.gz usr/man/man1/myisampack.1.gz usr/man/man1/myisamchk.1.gz usr/man/man1/mysql_fix_privilege_tables.1.gz usr/man/man1/mysql-stress-test.pl.1.gz usr/man/man1/resolveip.1.gz usr/man/man1/make_win_bin_dist.1.gz usr/man/man1/mysqlhotcopy.1.gz usr/man/man1/mysqld_multi.1.gz usr/man/man1/safe_mysqld.1.gz usr/man/man1/mysql_secure_installation.1.gz usr/man/man1/mysql_install_db.1.gz usr/man/man1/mysqldump.1.gz usr/man/man1/mysql-test-run.pl.1.gz usr/man/man1/mysqld_safe.1.gz usr/man/man1/mysqlaccess.1.gz usr/man/man1/mysql.server.1.gz usr/man/man1/make_win_src_distribution.1.gz etc/ etc/rc.d/ etc/rc.d/rc.mysqld.new etc/my-huge.cnf etc/my-medium.cnf etc/my-small.cnf etc/my-large.cnf /etc/rc.d/rc.mysqld is an ordinary Slackware-type start/stop script: #!/bin/sh # Start/stop/restart mysqld. # # Copyright 2003 Patrick J. Volkerding, Concord, CA # Copyright 2003 Slackware Linux, Inc., Concord, CA # # This program comes with NO WARRANTY, to the extent permitted by law. # You may redistribute copies of this program under the terms of the # GNU General Public License. # To start MySQL automatically at boot, be sure this script is executable: # chmod 755 /etc/rc.d/rc.mysqld # Before you can run MySQL, you must have a database. To install an initial # database, do this as root: # # su - mysql # mysql_install_db # # Note that step one is becoming the mysql user. It's important to do this # before making any changes to the database, or mysqld won't be able to write # to it later (this can be fixed with 'chown -R mysql.mysql /var/lib/mysql'). # To allow outside connections to the database comment out the next line. # If you don't need incoming network connections, then leave the line # uncommented to improve system security. #SKIP="--skip-networking" # Start mysqld: mysqld_start() { if [ -x /usr/bin/mysqld_safe ]; then # If there is an old PID file (no mysqld running), clean it up: if [ -r /var/run/mysql/mysql.pid ]; then if ! ps axc | grep mysqld 1> /dev/null 2> /dev/null ; then echo "Cleaning up old /var/run/mysql/mysql.pid." rm -f /var/run/mysql/mysql.pid fi fi /usr/bin/mysqld_safe --datadir=/var/lib/mysql --pid-file=/var/run/mysql/mysql.pid $SKIP & fi } # Stop mysqld: mysqld_stop() { # If there is no PID file, ignore this request... if [ -r /var/run/mysql/mysql.pid ]; then killall mysqld # Wait at least one minute for it to exit, as we don't know how big the DB is... for second in 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 \ 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 0 1 2 3 4 5 6 7 8 9 60 ; do if [ ! -r /var/run/mysql/mysql.pid ]; then break; fi sleep 1 done if [ "$second" = "60" ]; then echo "WARNING: Gave up waiting for mysqld to exit!" sleep 15 fi fi } # Restart mysqld: mysqld_restart() { mysqld_stop mysqld_start } case "$1" in 'start') mysqld_start ;; 'stop') mysqld_stop ;; 'restart') mysqld_restart ;; *) echo "usage $0 start|stop|restart" esac But there's also an unexpected init script on the machine, named /etc/init.d/mysql: #!/bin/sh # Copyright Abandoned 1996 TCX DataKonsult AB & Monty Program KB & Detron HB # This file is public domain and comes with NO WARRANTY of any kind # MySQL daemon start/stop script. # Usually this is put in /etc/init.d (at least on machines SYSV R4 based # systems) and linked to /etc/rc3.d/S99mysql and /etc/rc0.d/K01mysql. # When this is done the mysql server will be started when the machine is # started and shut down when the systems goes down. # Comments to support chkconfig on RedHat Linux # chkconfig: 2345 64 36 # description: A very fast and reliable SQL database engine. # Comments to support LSB init script conventions ### BEGIN INIT INFO # Provides: mysql # Required-Start: $local_fs $network $remote_fs # Should-Start: ypbind nscd ldap ntpd xntpd # Required-Stop: $local_fs $network $remote_fs # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: start and stop MySQL # Description: MySQL is a very fast and reliable SQL database engine. ### END INIT INFO # If you install MySQL on some other places than /usr, then you # have to do one of the following things for this script to work: # # - Run this script from within the MySQL installation directory # - Create a /etc/my.cnf file with the following information: # [mysqld] # basedir=<path-to-mysql-installation-directory> # - Add the above to any other configuration file (for example ~/.my.ini) # and copy my_print_defaults to /usr/bin # - Add the path to the mysql-installation-directory to the basedir variable # below. # # If you want to affect other MySQL variables, you should make your changes # in the /etc/my.cnf, ~/.my.cnf or other MySQL configuration files. # If you change base dir, you must also change datadir. These may get # overwritten by settings in the MySQL configuration files. #basedir= #datadir= # Default value, in seconds, afterwhich the script should timeout waiting # for server start. # Value here is overriden by value in my.cnf. # 0 means don't wait at all # Negative numbers mean to wait indefinitely service_startup_timeout=900 # The following variables are only set for letting mysql.server find things. # Set some defaults pid_file=/var/run/mysql/mysql.pid server_pid_file=/var/run/mysql/mysql.pid use_mysqld_safe=1 user=mysql if test -z "$basedir" then basedir=/usr bindir=/usr/bin if test -z "$datadir" then datadir=/var/lib/mysql fi sbindir=/usr/sbin libexecdir=/usr/libexec else bindir="$basedir/bin" if test -z "$datadir" then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" fi # datadir_set is used to determine if datadir was set (and so should be # *not* set inside of the --basedir= handler.) datadir_set= # # Use LSB init script functions for printing messages, if possible # lsb_functions="/lib/lsb/init-functions" if test -f $lsb_functions ; then . $lsb_functions else log_success_msg() { echo " SUCCESS! $@" } log_failure_msg() { echo " ERROR! $@" } fi PATH=/sbin:/usr/sbin:/bin:/usr/bin:$basedir/bin export PATH mode=$1 # start or stop shift other_args="$*" # uncommon, but needed when called from an RPM upgrade action # Expected: "--skip-networking --skip-grant-tables" # They are not checked here, intentionally, as it is the resposibility # of the "spec" file author to give correct arguments only. case `echo "testing\c"`,`echo -n testing` in *c*,-n*) echo_n= echo_c= ;; *c*,*) echo_n=-n echo_c= ;; *) echo_n= echo_c='\c' ;; esac parse_server_arguments() { for arg do case "$arg" in --basedir=*) basedir=`echo "$arg" | sed -e 's/^[^=]*=//'` bindir="$basedir/bin" if test -z "$datadir_set"; then datadir="$basedir/data" fi sbindir="$basedir/sbin" libexecdir="$basedir/libexec" ;; --datadir=*) datadir=`echo "$arg" | sed -e 's/^[^=]*=//'` datadir_set=1 ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --pid-file=*) server_pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --service-startup-timeout=*) service_startup_timeout=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --use-mysqld_safe) use_mysqld_safe=1;; --use-manager) use_mysqld_safe=0;; esac done } parse_manager_arguments() { for arg do case "$arg" in --pid-file=*) pid_file=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; --user=*) user=`echo "$arg" | sed -e 's/^[^=]*=//'` ;; esac done } wait_for_pid () { verb="$1" manager_pid="$2" # process ID of the program operating on the pid-file i=0 avoid_race_condition="by checking again" while test $i -ne $service_startup_timeout ; do case "$verb" in 'created') # wait for a PID-file to pop into existence. test -s $pid_file && i='' && break ;; 'removed') # wait for this PID-file to disappear test ! -s $pid_file && i='' && break ;; *) echo "wait_for_pid () usage: wait_for_pid created|removed manager_pid" exit 1 ;; esac # if manager isn't running, then pid-file will never be updated if test -n "$manager_pid"; then if kill -0 "$manager_pid" 2>/dev/null; then : # the manager still runs else # The manager may have exited between the last pid-file check and now. if test -n "$avoid_race_condition"; then avoid_race_condition="" continue # Check again. fi # there's nothing that will affect the file. log_failure_msg "Manager of pid-file quit without updating file." return 1 # not waiting any more. fi fi echo $echo_n ".$echo_c" i=`expr $i + 1` sleep 1 done if test -z "$i" ; then log_success_msg return 0 else log_failure_msg return 1 fi } # Get arguments from the my.cnf file, # the only group, which is read from now on is [mysqld] if test -x ./bin/my_print_defaults then print_defaults="./bin/my_print_defaults" elif test -x $bindir/my_print_defaults then print_defaults="$bindir/my_print_defaults" elif test -x $bindir/mysql_print_defaults then print_defaults="$bindir/mysql_print_defaults" else # Try to find basedir in /etc/my.cnf conf=/etc/my.cnf print_defaults= if test -r $conf then subpat='^[^=]*basedir[^=]*=\(.*\)$' dirs=`sed -e "/$subpat/!d" -e 's//\1/' $conf` for d in $dirs do d=`echo $d | sed -e 's/[ ]//g'` if test -x "$d/bin/my_print_defaults" then print_defaults="$d/bin/my_print_defaults" break fi if test -x "$d/bin/mysql_print_defaults" then print_defaults="$d/bin/mysql_print_defaults" break fi done fi # Hope it's in the PATH ... but I doubt it test -z "$print_defaults" && print_defaults="my_print_defaults" fi # # Read defaults file from 'basedir'. If there is no defaults file there # check if it's in the old (depricated) place (datadir) and read it from there # extra_args="" if test -r "$basedir/my.cnf" then extra_args="-e $basedir/my.cnf" else if test -r "$datadir/my.cnf" then extra_args="-e $datadir/my.cnf" fi fi parse_server_arguments `$print_defaults $extra_args mysqld server mysql_server mysql.server` # Look for the pidfile parse_manager_arguments `$print_defaults $extra_args manager` # # Set pid file if not given # if test -z "$pid_file" then pid_file=$datadir/mysqlmanager-`/bin/hostname`.pid else case "$pid_file" in /* ) ;; * ) pid_file="$datadir/$pid_file" ;; esac fi if test -z "$server_pid_file" then server_pid_file=$datadir/`/bin/hostname`.pid else case "$server_pid_file" in /* ) ;; * ) server_pid_file="$datadir/$server_pid_file" ;; esac fi case "$mode" in 'start') # Start daemon # Safeguard (relative paths, core dumps..) cd $basedir manager=$bindir/mysqlmanager if test -x $libexecdir/mysqlmanager then manager=$libexecdir/mysqlmanager elif test -x $sbindir/mysqlmanager then manager=$sbindir/mysqlmanager fi echo $echo_n "Starting MySQL" if test -x $manager -a "$use_mysqld_safe" = "0" then if test -n "$other_args" then log_failure_msg "MySQL manager does not support options '$other_args'" exit 1 fi # Give extra arguments to mysqld with the my.cnf file. This script may # be overwritten at next upgrade. $manager --user=$user --pid-file=$pid_file >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysqlmanager fi exit $return_value elif test -x $bindir/mysqld_safe then # Give extra arguments to mysqld with the my.cnf file. This script # may be overwritten at next upgrade. pid_file=$server_pid_file $bindir/mysqld_safe --datadir=$datadir --pid-file=$server_pid_file $other_args >/dev/null 2>&1 & wait_for_pid created $!; return_value=$? # Make lock for RedHat / SuSE if test -w /var/lock/subsys then touch /var/lock/subsys/mysql fi exit $return_value else log_failure_msg "Couldn't find MySQL manager ($manager) or server ($bindir/mysqld_safe)" fi ;; 'stop') # Stop daemon. We use a signal here to avoid having to know the # root password. # The RedHat / SuSE lock directory to remove lock_dir=/var/lock/subsys/mysqlmanager # If the manager pid_file doesn't exist, try the server's if test ! -s "$pid_file" then pid_file=$server_pid_file lock_dir=/var/lock/subsys/mysql fi if test -s "$pid_file" then mysqlmanager_pid=`cat $pid_file` echo $echo_n "Shutting down MySQL" kill $mysqlmanager_pid # mysqlmanager should remove the pid_file when it exits, so wait for it. wait_for_pid removed "$mysqlmanager_pid"; return_value=$? # delete lock for RedHat / SuSE if test -f $lock_dir then rm -f $lock_dir fi exit $return_value else log_failure_msg "MySQL manager or server PID file could not be found!" fi ;; 'restart') # Stop the service and regardless of whether it was # running or not, start it again. if $0 stop $other_args; then $0 start $other_args else log_failure_msg "Failed to stop running server, so refusing to try to start." exit 1 fi ;; 'reload'|'force-reload') if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file kill -HUP $mysqld_pid && log_success_msg "Reloading service MySQL" touch $server_pid_file else log_failure_msg "MySQL PID file could not be found!" exit 1 fi ;; 'status') # First, check to see if pid file exists if test -s "$server_pid_file" ; then read mysqld_pid < $server_pid_file if kill -0 $mysqld_pid 2>/dev/null ; then log_success_msg "MySQL running ($mysqld_pid)" exit 0 else log_failure_msg "MySQL is not running, but PID file exists" exit 1 fi else # Try to find appropriate mysqld process mysqld_pid=`pidof $sbindir/mysqld` if test -z $mysqld_pid ; then if test "$use_mysqld_safe" = "0" ; then lockfile=/var/lock/subsys/mysqlmanager else lockfile=/var/lock/subsys/mysql fi if test -f $lockfile ; then log_failure_msg "MySQL is not running, but lock exists" exit 2 fi log_failure_msg "MySQL is not running" exit 3 else log_failure_msg "MySQL is running but PID file could not be found" exit 4 fi fi ;; *) # usage echo "Usage: $0 {start|stop|restart|reload|force-reload|status} [ MySQL server options ]" exit 1 ;; esac exit 0 An unimportant aside: The previous users of the machine kept a messy home directory. Their home directory was /root. I've pasted a copy at http://www.pastebin.ca/2167496. My question: Why is there a /etc/init.d/mysql file on this Slackware machine? How could it have gotten there? P.S. This question is far from perfect. Please feel free to edit it.

  Read the article

• why i failed to build vsftp?

  - by hugemeow

  make, then failed with the following message. the main point is /lib/libcap.so.1: could not read symbols: File in wrong format, confusing... gcc -c readwrite.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c opts.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ssl.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sslslave.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ptracesandbox.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c ftppolicy.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sysutil.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -c sysdeputil.c -O2 -Wall -W -Wshadow -idirafter dummyinc gcc -o vsftpd main.o utility.o prelogin.o ftpcmdio.o postlogin.o privsock.o tunables.o ftpdataio.o secbuf.o ls.o postprivparent.o logging.o str.o netstr.o sysstr.o strlist.o banner.o filestr.o parseconf.o secutil.o ascii.o oneprocess.o twoprocess.o privops.o standalone.o hash.o tcpwrap.o ipaddrparse.o access.o features.o readwrite.o opts.o ssl.o sslslave.o ptracesandbox.o ftppolicy.o sysutil.o sysdeputil.o -Wl,-s `./vsf_findlibs.sh` /lib/libcap.so.1: could not read symbols: File in wrong format collect2: ld returned 1 exit status make: *** [vsftpd] Error 1 [mirror@hugemeow vsftpd]$ ls /lib/libc libc-2.5.so libcap.so.1.10 libcidn.so.1 libcom_err.so.2.1 libcrypto.so.0.9.8e libcrypt.so.1 libcap.so.1 libcidn-2.5.so libcom_err.so.2 libcrypt-2.5.so libcrypto.so.6 libc.so.6 [mirror@hugemeow vsftpd]$ ls /lib/libc libc-2.5.so libcap.so.1.10 libcidn.so.1 libcom_err.so.2.1 libcrypto.so.0.9.8e libcrypt.so.1 libcap.so.1 libcidn-2.5.so libcom_err.so.2 libcrypt-2.5.so libcrypto.so.6 libc.so.6 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -l lrwxrwxrwx 1 root root 14 Mar 20 2012 /lib/libcap.so.1 -> libcap.so.1.10 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -lh lrwxrwxrwx 1 root root 14 Mar 20 2012 /lib/libcap.so.1 -> libcap.so.1.10 [mirror@hugemeow vsftpd]$ ls /lib/libcap.so.1 -lhL -rwxr-xr-x 1 root root 12K Mar 15 2007 /lib/libcap.so.1 this may have something to do with 64 bit system, but i have make modification to vsf_findlibs.sh 48 # Look for libcap (capabilities) 49 if locate_library /lib64/libcap.so.1; then 50 echo "/lib/libcap.so.1"; 51 elif locate_library /lib64/libcap.so.2; then 52 echo "/lib/libcap.so.2"; 53 else 54 # locate_library /usr/lib/libcap.so && echo "-lcap"; 55 # locate_library /lib/libcap.so && echo "-lcap"; 56 locate_library /lib64/libcap.so.1 && echo "-lcap"; 57 fi but make failed with the same error, why?

  Read the article

• Memcached Debuging/Server Logs Monitor the Memcached Servers?

  - by user1179459

  I have chat engine which is based on the Memcached variables, putting them into arrays and reading them in other end via jquery, which works fine 95% of the times, however when the server load is high memcached (presume its the memcached) the crash and browser gets stucks up. I dont think its jquery issue since this only happens when the server load is very high. I need a way to monitor the memcached servers or somehow write a log file into where the fails/errors comes in... Any idea on how i can do this ? or any idea why memcached servers fails ? I run the memcached as follows $GLOBALS['MemCached'] = FALSE; $GLOBALS['MemCached'] = new Memcache; $GLOBALS['MemCached']->pconnect('localhost', 11211); My memcached config is as follows #! /bin/sh # # chkconfig: - 55 45 # description: The memcached daemon is a network memory cache service. # processname: memcached # config: /etc/sysconfig/memcached # pidfile: /var/run/memcached/memcached.pid # Standard LSB functions #. /lib/lsb/init-functions # Source function library. . /etc/init.d/functions PORT=11211 USER=memcached MAXCONN=1024 CACHESIZE=128 OPTIONS="" if [ -f /etc/sysconfig/memcached ];then . /etc/sysconfig/memcached fi # Check that networking is up. . /etc/sysconfig/network if [ "$NETWORKING" = "no" ] then exit 0 fi RETVAL=0 prog="memcached" pidfile=${PIDFILE-/var/run/memcached/memcached.pid} lockfile=${LOCKFILE-/var/lock/subsys/memcached} start () { echo -n $"Starting $prog: " # Ensure that /var/run/memcached has proper permissions if [ "`stat -c %U /var/run/memcached`" != "$USER" ]; then chown $USER /var/run/memcached fi daemon --pidfile ${pidfile} memcached -d -p $PORT -u $USER -m $CACHESIZE -c $MAXCONN -P ${pidfile} $OPTIONS RETVAL=$? echo [ $RETVAL -eq 0 ] && touch ${lockfile} } stop () { echo -n $"Stopping $prog: " killproc -p ${pidfile} /usr/bin/memcached RETVAL=$? echo if [ $RETVAL -eq 0 ] ; then rm -f ${lockfile} ${pidfile} fi } restart () { stop start } # See how we were called. case "$1" in start) start ;; stop) stop ;; status) status -p ${pidfile} memcached RETVAL=$? ;; restart|reload|force-reload) restart ;; condrestart|try-restart) [ -f ${lockfile} ] && restart || : ;; *) echo $"Usage: $0 {start|stop|status|restart|reload|force-reload|condrestart|try-restart}" RETVAL=2 ;; esac exit $RETVAL

  Read the article

• Starting/Stopping Custom PHP Chat Server Linux Service (CentOS)

  - by chad

  I have been trying all night to get this service working properly. I created this script from a template and am very new to bash coding. I wrote a fully functioning chat server in php which runs endlessly, but now want to make it a dedicated service. I want to do this so that it starts on server boot and boots back up if possible when there are any down-times with the server. The issue is that I need this thing to run in a detached screen so that I can monitor packet data or send server commands via SSH when need-be. The main problem that i'm having is that it needs to have its own PID when it starts so that I can stop/restart it when needed. I am the type who grinds on coding until I figure it out, but this is so new to me that it seems the learning curve here is very steep and frustrating. Below is my code if anybody can please help me with this one, i've gotten so tired I can't even concentrate any more :( #!/bin/sh # # chatserver # # chkconfig: 345 20 90 # description: chatServer Linux Service Daemon \ # for general server handling ### BEGIN INIT INFO # Provides: chatserver # Required-Start: $local_fs $network $named $syslog # Required-Stop: $local_fs $syslog # Default-Start: 3 4 5 # Default-Stop: 0 1 2 6 # Short-Description: This service maintains the chatServer # Description: chatServer Linux Service Daemon # for general server handling ### END INIT INFO # Source function library. . /etc/rc.d/init.d/functions exec="screen php -q /var/www/html/chatServer.php" prog="chatserver" config="/etc/sysconfig/$prog" pidfile="/var/run/chatserver.pid" [ -e /etc/sysconfig/$prog ] && . /etc/sysconfig/$prog lockfile=/var/lock/subsys/$prog start() { #$exec || exit 5 echo -n $"Starting $prog: " daemon $exec --name=$exec --pidfile=$pidfile retval=$? echo [ $retval -eq 0 ] && touch $lockfile return $retval } stop() { echo -n $"Stopping $prog: " killproc -p $pidfile rm -f $pidfile retval=$? echo [ $retval -eq 0 ] && rm -f $lockfile return $retval } restart() { stop start } reload() { restart } force_reload() { restart } rh_status() { # run checks to determine if the service is running or use generic status status $prog } rh_status_q() { rh_status >/dev/null 2>&1 } case "$1" in start) rh_status_q && exit 0 $1 ;; stop) rh_status_q || exit 0 $1 ;; restart) $1 ;; reload) rh_status_q || exit 7 $1 ;; force-reload) force_reload ;; status) rh_status ;; condrestart|try-restart) rh_status_q || exit 0 restart ;; *) echo $"Usage: $0 {start|stop|status|restart|condrestart|try-restart|reload|force-reload}" exit 2 esac exit $?

  Read the article

• Explanation of the init.d/scripts Fedora

  - by Shahmir Javaid

  Below is a copy of vsftpd, i need some explanations of some of the scripts mentioned below in this script: #!/bin/bash # ### BEGIN INIT INFO # Provides: vsftpd # Required-Start: $local_fs $network $named $remote_fs $syslog # Required-Stop: $local_fs $network $named $remote_fs $syslog # Short-Description: Very Secure Ftp Daemon # Description: vsftpd is a Very Secure FTP daemon. It was written completely from # scratch ### END INIT INFO # vsftpd This shell script takes care of starting and stopping # standalone vsftpd. # # chkconfig: - 60 50 # description: Vsftpd is a ftp daemon, which is the program \ # that answers incoming ftp service requests. # processname: vsftpd # config: /etc/vsftpd/vsftpd.conf # Source function library. . /etc/rc.d/init.d/functions # Source networking configuration. . /etc/sysconfig/network RETVAL=0 prog="vsftpd" start() { # Start daemons. # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 if [ -d /etc/vsftpd ] ; then CONFS=`ls /etc/vsftpd/*.conf 2>/dev/null` [ -z "$CONFS" ] && exit 6 for i in $CONFS; do site=`basename $i .conf` echo -n $"Starting $prog for $site: " daemon /usr/sbin/vsftpd $i RETVAL=$? echo if [ $RETVAL -eq 0 ]; then touch /var/lock/subsys/$prog break else if [ -f /var/lock/subsys/$prog ]; then RETVAL=0 break fi fi done else RETVAL=1 fi return $RETVAL } stop() { # Stop daemons. echo -n $"Shutting down $prog: " killproc $prog RETVAL=$? echo [ $RETVAL -eq 0 ] && rm -f /var/lock/subsys/$prog return $RETVAL } # See how we were called. case "$1" in start) start ;; stop) stop ;; restart|reload) stop start RETVAL=$? ;; condrestart|try-restart|force-reload) if [ -f /var/lock/subsys/$prog ]; then stop start RETVAL=$? fi ;; status) status $prog RETVAL=$? ;; *) echo $"Usage: $0 {start|stop|restart|try-restart|force-reload|status}" exit 1 esac exit $RETVAL Question I What the hell is the difference between the && and || signs in the below commands, and is it just an easy way to do a simple if check or is it completely different to a if[..something..]; then ..something.. fi: # Check that networking is up. [ ${NETWORKING} = "no" ] && exit 1 [ -x /usr/sbin/vsftpd ] || exit 1 Question II i get what -eq and -gt is (equal to, greater than) but is there a simple website that explains what -x, -d and -f are? Any help would be apreciated Running Fedora 12 on my OS. Script copied from /etc/init.d/vsftpd Question III It says required starts are $local_fs $network $named $remote_fs $syslog but i cant see any where it checks for those.

  Read the article

• Dell Vostro 3560 bluetooth doesn't work

  - by Shein

  I installed the wireless driver using this instruction How do I install BCM43142 wireless drivers for Dell Vostro 3460/3560 and I have WiFi working. No problems here. But unfortunately the bluetooth doesn't work. The ubuntu bar shows the bluetooth sign and I can turn the bluetooth on/off but I can't discover any devices. And I can't find my laptop when I turn visibility On. So, obviously bluetooth doesn't work. I couldn't find the reports that blutooth can actually work with this adapter in Ubuntu. So, my question is: Is there anyone with BCM43142 adapter that have bluetooth working? Thank You in advance. PS. Ubuntu 12.10 x64 Update: After some fiddling around with different drivers from different sources I managed to get bluetooth working. Not flawlessly but at least I can pair a device. Bluetooth started working after installation of this package bt-bcm43142-onereic_0.0+20111116somerville2_amd64.deb Originally I found this package on the disk with Ubuntu which came with the Laptop. What this package does, it installs a firmware loader and a firmware itself. This firmware needs to get bluetooth working. Still bluetooth sometimes doesn't work even with this package. But manual loading the firmware helps. brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 Also I found it strange that this package writes all different ids into /sys/bus/usb/drivers/btusb/new_id because only one from the list matches my device ID bcm43142.conf: install btusb /sbin/modprobe --ignore-install btusb && echo '0a5c 21d3' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21d7' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e1' > /sys/bus/usb/drivers/btusb/new_id && echo '0a5c 21e3' > /sys/bus/usb/drivers/btusb/new_id && hciconfig hci0 up && /usr/bin/brcm_patchram_plus_usb --patchram /lib/firmware/BCM43142A0_001.001.011.0028.0036.hcd hci0 & My lsusb: ... Bus 002 Device 003: ID 0a5c:21d7 Broadcom Corp. In conclusion: bluetooth works not nearly as good as in windows :( once I even got a complete crash of the system because of the btusb module. Luckily WiFi works perfectly :)

  Read the article

• why is $0 set to -bash?

  - by James Shimer

  First login process name seems to be set to "-bash", but if I subshell then it becomes "bash". for example: root@nowere:~# echo $0 -bash root@nowere:~# bash root@nowere:~# echo $0 bash -bash is causing some scripts to fail, such as . /usr/share/debconf/confmodule exec /usr/share/debconf/frontend -bash Can't exec "-bash": No such file or directory at /usr/share/perl/5.14/IPC/Open3.pm line 186. open2: exec of -bash failed at /usr/share/perl5/Debconf/ConfModule.pm line 59 Anyone know the reason $0 is set to -bash?

  Read the article

• On configuring GC 10.2.0.5 to monitor LISTENER SCAN using UDMs ...

  - by [email protected]

  Hi,Looks like Grid Control 10.2.0.5 is not fully prepared for monitoringthe Grid Infrastructure (11gR2).Even I'm pretty sure the upcoming version of GC (11g) will of course support all the new features of 11gR2, some customersare asking for some "hand-made" procedures for monitoring all the new stuff.I think one of the most critical components that cant be monitored are the LISTENER SCAN, so I have developed a little script for doing sousing the GC User Defined Metrics ( at host level )I am more than happy to share with you:#!/bin/ksh   ###    NAME###     monitor_scan.sh######    DESCRIPTION###      SCAN Listener monitoring######    RETURNS######    NOTES######    MODIFIED           (DD/MM/YY)###      Oracle            25/03/10     - Creation###export ORACLE_HOME=/opt/oracle/soft/11.2/gridRSC_KEY=$1AWK=/sbin/awk   LISTENER_DOWN_COUNT=$(${ORACLE_HOME}/bin/crsctl status resource -w 'TYPE = ora.scan_listener.type' | grep OFFLINE | wc -l)if [ ${LISTENER_DOWN_COUNT} != 0 ]; then  SCAN_DOWN_LIST=$(${ORACLE_HOME}/bin/crsctl status resource  -w 'TYPE = ora.scan_listener.type' | $AWK \ 'BEGIN { FS="="; state = 0; }  $1~/NAME/ && $2~/'$RSC_KEY'/ {appname = $2; state=1};  state == 0 {next;}  $1~/TARGET/ && state == 1 {apptarget = $2; state=2;}  $1~/STATE/ && state == 2 {appstate = $2; state=3;}  state == 3 {printf "%-45s %-10s %-18s\n", appname, apptarget, appstate; state=0;}' | grep OFFLINE | awk '{ print $1 }')  echo em_result=ALERT  echo em_message=There are LISTENER SCAN with down status: [${SCAN_DOWN_LIST}]else  echo em_result=NORMAL  echo em_message=All SCAN Listener are UPfiHope it helpsL

  Read the article

• Wine 1.5 %ProgramFiles% error

  - by elclanrs

  I'm trying to install d3dx9 with winetricks on wine 1.5 from ppa and I keep getting an error. I tried: WINEARCH=win32 WINEPREFIX=~/.win32 winecfg sudo WINEARCH=win32 WINEPREFIX=~/.win32 winetricks And still get this error: wine cmd.exe /c echo '%ProgramFiles%' returned empty string If I type wine cmd.exe /c echo '%ProgramFiles%' into the terminal I get C:\Program Files so the path seems correct but not when I run winetricks. I also tried this regedit fix with no luck. Any ideas?

  Read the article

• How to enable bluetooth when there is no hardware switch

  - by Robert Mutke

  My laptop Thinkpad Edge e320 got out of standby with bluetooth and wireless disabled. WiFi got enabled normally in unity but bluetooth says that "bluetooth is disabled by hardware switch". There is no hw switch on my laptop. I tried: # echo 1 > /sys/devices/platform/thinkpad_acpi/bluetooth_enable bash: echo: write error: Operation not permitted but as you see no results. Fn-F9, which is radio control, does not work. Any help?

  Read the article

• Only run CRON job if connected to specific wifi network

  - by Herbert

  I am a newbie to scripting on Linux (Lubuntu), but I would like to make a script that runs a cron job only if my laptop is connected to my home wifi. Is this possible? I guess, I could do something with iwconfig and pull the ESSID from there with grep? So far, I tried this and it seems to work: #!/bin/bash # CRON, connected to specific WIFI clear netid=HOFF216 if iwconfig | grep $netid then clear echo "True, we are connected to $netid" rsync ........... else clear echo "False, we are not connected to $netid" fi

  Read the article

• how to execute for loop with sed in terminal

  - by vipin8169

  I want to execute the for loop with sed command, and is getting an error for the same for i in <comma-separated server name list>;do "command";echo $i;done where command=sed '/^$/d' /home/nextag/instance.properties|grep -vc '#' I'm getting the following error :- -bash: sed "/^$/d" /home/nextag/instance.properties|grep -vc#: No such file or directory lu1 What is the correct way to execute this command to get the perfect output I tried this as well for i in lu1;do 'sed \'/^$/d\' /home/nextag/instance.properties|grep -vc \'#\'';echo $i;done Also, can some explain the part '/^$/d'in sed '/^$/d' /home/nextag/instance.properties|grep -vc '#'

  Read the article

• Current activity logger

  - by user72605

  Very inexperienced coder here: Does anyone know of an app (for iOS or Mac) that asks for my current activity every hour or so? I see tons of apps that let you log your activities, but none that use popups/notifications to actively ask you. I found a script that looks promising (source), but I'm having trouble implementing it so that it repeats every hour: #!/bin/bash echo What are you doing right now? read -e what echo `date` - $what >> timelog.txt Thanks!

  Read the article

• How to set system-wide proxy address using shell script?

  - by skg

  I want to set system Proxy address through my Qt application. So i was wondering if i could write a script which can be executed by my application every time to change the proxy address. I tried : #! /bin/sh echo "# Generated by Application" export $1 echo "Proxy Address ${1} but this script was not successful. I think it was unable to execute "export" command. Can anyone help me resolving this issue ?

  Read the article

• Non-responsive mouse and keyboard fix

  - by JacobusR

  I'm using Ubuntu 12.10 and found that after about 20 minutes of work that my mouse and keyboard became very unresponsive. So I found the following fix: sudo -i To test if this is the problem: echo N> /sys/module/drm_kms_helper/parameters/poll To make the fix permanent: echo "options drm_kms_helper poll=N">/etc/modprobe.d/local.conf It appears that the fix does work, but what does this do? Am I breaking something else in doing this?

  Read the article

• PHP Fingerprinting CMS Versions by their meta tags [migrated]

  - by Mud

  Hey guys I'm having some issues with the speed of my script. I'm a novice I know so getting past that - what suggestions would you have to speed up my script? I was originally just reading in the index.php and then searching the <head> of the page for an array of strings. Then I read about the get_meta_tags and went that way. Then I had issues with some sites having 300 redirects in place so I used curl to check the URL existed and to speed up things but it's still taking 5 minutes or so to execute. <?php function url_exist($url){ $c=curl_init(); curl_setopt($c,CURLOPT_URL,$url); curl_setopt($c,CURLOPT_HEADER,1); curl_setopt($c,CURLOPT_NOBODY,1); curl_setopt($c,CURLOPT_RETURNTRANSFER,1); curl_setopt($c,CURLOPT_FRESH_CONNECT,1); if(!curl_exec($c)){ return false; }else{ return true; } curl_close($c); } function checkVersion($url){ $tags = get_meta_tags($url); if (is_array($tags) && array_key_exists('generator', $tags)) { $v = "<span style='background-color:#7BF55D;color:#A3A0A0'>".$tags['generator']."</span"; }else{ $v="<span style='background-color:#F55D67;color:#A3A0A0'>Metatag not found!</span>"; } return $v; } $row = 1; echo "<table>"; if (($handle = fopen("url.csv", "r")) !== FALSE) { while (($data = fgetcsv($handle, 1000, ",")) !== FALSE) { $num = count($data); $row++; for ($c=0; $c < $num; $c++) { if(url_exist($data[$c])){ echo "<tr><td>".$data[$c]."</td><td>".checkVersion($data[$c])."</td></tr>"; sleep(2); }else{ echo "<tr><td>".$data[$c]."</td><td><td><span style='background-color:#F55D5D;color:#A3A0A0'>URL not valid!<span></td></tr>"; } } } fclose($handle); } echo "</table>"; ?>

  Read the article

• when including a file using php function not work?

  - by John Smiith

  MY PHP FUNCTION IS function functionName() { include($_SERVER['DOCUMENT_ROOT']."/path/file.php"); } Content of File.php is $foo = 'bar'; Calling function (content of file test.php) functionName(); When call function and variable not work echo $foo; <- not works But when adding code below its works (content of file test.php) include($_SERVER['DOCUMENT_ROOT']."/path/file.php"); echo $foo; <- its works

  Read the article

• When using sudo, I get 'premission denied'

  - by JacobusR

  When using sudo to allow edits to files, I regularly get 'permission denied'. For example, my mouse is jittery and sluggish, so I want to disable polling: sudo echo "options drm_kms_helper poll=N">/etc/modprobe.d/local.conf I'm prompted for a password, and then get: bash: /etc/modprobe.d/local.conf: Permission denied So I tried to do a temporary change to disable polling by using: sudo echo N> /sys/module/drm_kms_helper/parameters/poll Yet again the system responded with: bash: /sys/module/drm_kms_helper/parameters/poll: Permission denied Any ideas?

  Read the article

• read file in shell script

  - by moata_u

  how can i read file in shell script , then assign each line to an variable that i can use later ,,,(am thinking in way to load an default setting from file) i already try : process (){ } FILE='' read -p "Please enter name of default file : " FILE if [ ! -f $FILE ]; then echo "$FILE : does not exists " exit 1 elif [ ! -r $FILE ]; then echo "$FILE : can not read " fi exec 0<"$FILE" n=0 while read -r line do (assign each line to an variable) done

  Read the article

• How do I host node.js apps with pm2 without running them as root?

  - by jishi

  I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

  Read the article

• ssh-agent on ubuntu rapidly restarts

  - by Santa Claus

  I am attempting to use ssh-agent on Ubuntu 13.10 so that I will not have to enter my passphrase to unlock a key every time I want to use ssh or git. As you can see below, ssh-agent appears to be restarting for some reason. These commends were executed within a period of less than 5 seconds: andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-pqm5J0s70NxG/agent.2820; export SSH_AUTH_SOCK; SSH_AGENT_PID=2821; export SSH_AGENT_PID; echo Agent pid 2821; andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-VpkOH2WKjT1M/agent.2822; export SSH_AUTH_SOCK; SSH_AGENT_PID=2823; export SSH_AGENT_PID; echo Agent pid 2823; andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-EQ6X9JHNiBOO/agent.2824; export SSH_AUTH_SOCK; SSH_AGENT_PID=2825; export SSH_AGENT_PID; echo Agent pid 2825; andrew@zaphod:~$ ssh-agent SSH_AUTH_SOCK=/tmp/ssh-8Iij8kFkaapz/agent.2826; export SSH_AUTH_SOCK; SSH_AGENT_PID=2827; export SSH_AGENT_PID; echo Agent pid 2827; andrew@zaphod:~$ My guess is that ssh-agent is crashing, but how would I know? What log file would it log to?

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >