Search Results

Search found 11167 results on 447 pages for 'financial close'.

Page 43/447 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • Why does fprintf start printing out of order or not at all?

    - by Steve Melvin
    This code should take an integer, create pipes, spawn two children, wait until they are dead, and start all over again. However, around the third time around the loop I lose my prompt to enter a number and it no longer prints the number I've entered. Any ideas? #include <stdio.h> #include <stdlib.h> #include <unistd.h> #include <errno.h> #define WRITE 1 #define READ 0 int main (int argc, const char * argv[]) { //Pipe file-descriptor array unsigned int isChildA = 0; int pipeA[2]; int pipeB[2]; int num = 0; while(1){ fprintf(stderr,"Enter an integer: "); scanf("%i", &num); if(num == 0){ fprintf(stderr,"You entered zero, exiting...\n"); exit(0); } //Open Pipes if(pipe(pipeA) < 0){ fprintf(stderr,"Could not create pipe A.\n"); exit(1); } if(pipe(pipeB) < 0){ fprintf(stderr,"Could not create pipe B.\n"); exit(1); } fprintf(stderr,"Value read: %i \n", num); fprintf(stderr,"Parent PID: %i\n", getpid()); pid_t procID = fork(); switch (procID) { case -1: fprintf(stderr,"Fork error, quitting...\n"); exit(1); break; case 0: isChildA = 1; break; default: procID = fork(); if (procID<0) { fprintf(stderr,"Fork error, quitting...\n"); exit(1); } else if(procID == 0){ isChildA = 0; } else { write(pipeA[WRITE], &num, sizeof(int)); close(pipeA[WRITE]); close(pipeA[READ]); close(pipeB[WRITE]); close(pipeB[READ]); pid_t pid; while (pid = waitpid(-1, NULL, 0)) { if (errno == ECHILD) { break; } } } break; } if (procID == 0) { //We're a child, do kid-stuff. ssize_t bytesRead = 0; int response; while (1) { while (bytesRead == 0) { bytesRead = read((isChildA?pipeA[READ]:pipeB[READ]), &response, sizeof(int)); } if (response < 2) { //Kill other child and self fprintf(stderr, "Terminating PROCID: %i\n", getpid()); write((isChildA?pipeB[WRITE]:pipeA[WRITE]), &response, sizeof(int)); close(pipeA[WRITE]); close(pipeA[READ]); close(pipeB[WRITE]); close(pipeB[READ]); return 0; } else if(!(response%2)){ //Even response/=2; fprintf(stderr,"PROCID: %i, VALUE: %i\n", getpid(), response); write((isChildA?pipeB[WRITE]:pipeA[WRITE]), &response, sizeof(int)); bytesRead = 0; } else { //Odd response*=3; response++; fprintf(stderr,"PROCID: %i, VALUE: %i\n", getpid(), response); write((isChildA?pipeB[WRITE]:pipeA[WRITE]), &response, sizeof(int)); bytesRead = 0; } } } } return 0; } This is the output I am getting... bash-3.00$ ./proj2 Enter an integer: 101 Value read: 101 Parent PID: 9379 PROCID: 9380, VALUE: 304 PROCID: 9381, VALUE: 152 PROCID: 9380, VALUE: 76 PROCID: 9381, VALUE: 38 PROCID: 9380, VALUE: 19 PROCID: 9381, VALUE: 58 PROCID: 9380, VALUE: 29 PROCID: 9381, VALUE: 88 PROCID: 9380, VALUE: 44 PROCID: 9381, VALUE: 22 PROCID: 9380, VALUE: 11 PROCID: 9381, VALUE: 34 PROCID: 9380, VALUE: 17 PROCID: 9381, VALUE: 52 PROCID: 9380, VALUE: 26 PROCID: 9381, VALUE: 13 PROCID: 9380, VALUE: 40 PROCID: 9381, VALUE: 20 PROCID: 9380, VALUE: 10 PROCID: 9381, VALUE: 5 PROCID: 9380, VALUE: 16 PROCID: 9381, VALUE: 8 PROCID: 9380, VALUE: 4 PROCID: 9381, VALUE: 2 PROCID: 9380, VALUE: 1 Terminating PROCID: 9381 Terminating PROCID: 9380 Enter an integer: 102 Value read: 102 Parent PID: 9379 PROCID: 9386, VALUE: 51 PROCID: 9387, VALUE: 154 PROCID: 9386, VALUE: 77 PROCID: 9387, VALUE: 232 PROCID: 9386, VALUE: 116 PROCID: 9387, VALUE: 58 PROCID: 9386, VALUE: 29 PROCID: 9387, VALUE: 88 PROCID: 9386, VALUE: 44 PROCID: 9387, VALUE: 22 PROCID: 9386, VALUE: 11 PROCID: 9387, VALUE: 34 PROCID: 9386, VALUE: 17 PROCID: 9387, VALUE: 52 PROCID: 9386, VALUE: 26 PROCID: 9387, VALUE: 13 PROCID: 9386, VALUE: 40 PROCID: 9387, VALUE: 20 PROCID: 9386, VALUE: 10 PROCID: 9387, VALUE: 5 PROCID: 9386, VALUE: 16 PROCID: 9387, VALUE: 8 PROCID: 9386, VALUE: 4 PROCID: 9387, VALUE: 2 PROCID: 9386, VALUE: 1 Terminating PROCID: 9387 Terminating PROCID: 9386 Enter an integer: 104 Value read: 104 Parent PID: 9379 Enter an integer: PROCID: 9388, VALUE: 52 PROCID: 9389, VALUE: 26 PROCID: 9388, VALUE: 13 PROCID: 9389, VALUE: 40 PROCID: 9388, VALUE: 20 PROCID: 9389, VALUE: 10 PROCID: 9388, VALUE: 5 PROCID: 9389, VALUE: 16 PROCID: 9388, VALUE: 8 PROCID: 9389, VALUE: 4 PROCID: 9388, VALUE: 2 PROCID: 9389, VALUE: 1 Terminating PROCID: 9388 Terminating PROCID: 9389 105 Value read: 105 Parent PID: 9379 Enter an integer: PROCID: 9395, VALUE: 316 PROCID: 9396, VALUE: 158 PROCID: 9395, VALUE: 79 PROCID: 9396, VALUE: 238 PROCID: 9395, VALUE: 119 PROCID: 9396, VALUE: 358 PROCID: 9395, VALUE: 179 PROCID: 9396, VALUE: 538 PROCID: 9395, VALUE: 269 PROCID: 9396, VALUE: 808 PROCID: 9395, VALUE: 404 PROCID: 9396, VALUE: 202 PROCID: 9395, VALUE: 101 PROCID: 9396, VALUE: 304 PROCID: 9395, VALUE: 152 PROCID: 9396, VALUE: 76 PROCID: 9395, VALUE: 38 PROCID: 9396, VALUE: 19 PROCID: 9395, VALUE: 58 PROCID: 9396, VALUE: 29 PROCID: 9395, VALUE: 88 PROCID: 9396, VALUE: 44 PROCID: 9395, VALUE: 22 PROCID: 9396, VALUE: 11 PROCID: 9395, VALUE: 34 PROCID: 9396, VALUE: 17 PROCID: 9395, VALUE: 52 PROCID: 9396, VALUE: 26 PROCID: 9395, VALUE: 13 PROCID: 9396, VALUE: 40 PROCID: 9395, VALUE: 20 PROCID: 9396, VALUE: 10 PROCID: 9395, VALUE: 5 PROCID: 9396, VALUE: 16 PROCID: 9395, VALUE: 8 PROCID: 9396, VALUE: 4 PROCID: 9395, VALUE: 2 PROCID: 9396, VALUE: 1 Terminating PROCID: 9395 Terminating PROCID: 9396 105 Value read: 105 Parent PID: 9379 Enter an integer: PROCID: 9397, VALUE: 316 PROCID: 9398, VALUE: 158 PROCID: 9397, VALUE: 79 PROCID: 9398, VALUE: 238 PROCID: 9397, VALUE: 119 PROCID: 9398, VALUE: 358 PROCID: 9397, VALUE: 179 PROCID: 9398, VALUE: 538 PROCID: 9397, VALUE: 269 PROCID: 9398, VALUE: 808 PROCID: 9397, VALUE: 404 PROCID: 9398, VALUE: 202 PROCID: 9397, VALUE: 101 PROCID: 9398, VALUE: 304 PROCID: 9397, VALUE: 152 PROCID: 9398, VALUE: 76 PROCID: 9397, VALUE: 38 PROCID: 9398, VALUE: 19 PROCID: 9397, VALUE: 58 PROCID: 9398, VALUE: 29 PROCID: 9397, VALUE: 88 PROCID: 9398, VALUE: 44 PROCID: 9397, VALUE: 22 PROCID: 9398, VALUE: 11 PROCID: 9397, VALUE: 34 PROCID: 9398, VALUE: 17 PROCID: 9397, VALUE: 52 PROCID: 9398, VALUE: 26 PROCID: 9397, VALUE: 13 PROCID: 9398, VALUE: 40 PROCID: 9397, VALUE: 20 PROCID: 9398, VALUE: 10 PROCID: 9397, VALUE: 5 PROCID: 9398, VALUE: 16 PROCID: 9397, VALUE: 8 PROCID: 9398, VALUE: 4 PROCID: 9397, VALUE: 2 PROCID: 9398, VALUE: 1 Terminating PROCID: 9397 Terminating PROCID: 9398 106 Value read: 106 Parent PID: 9379 Enter an integer: PROCID: 9399, VALUE: 53 PROCID: 9400, VALUE: 160 PROCID: 9399, VALUE: 80 PROCID: 9400, VALUE: 40 PROCID: 9399, VALUE: 20 PROCID: 9400, VALUE: 10 PROCID: 9399, VALUE: 5 PROCID: 9400, VALUE: 16 PROCID: 9399, VALUE: 8 PROCID: 9400, VALUE: 4 PROCID: 9399, VALUE: 2 PROCID: 9400, VALUE: 1 Terminating PROCID: 9399 Terminating PROCID: 9400 ^C Another thing that's strange, when ran from within XCode it behaves normally. However, when ran from bash on Solaris or OSX it acts up.

    Read the article

  • Backbone.js Adding Model to Collection Issue

    - by jtmgdevelopment
    I am building a test application in Backbone.js (my first app using Backbone). The app goes like this: Load Data from server "Plans" Build list of plans and show to screen There is a button to add a new plan Once new plan is added, add to collection ( do not save to server as of now ) redirect to index page and show the new collection ( includes the plan you just added) My issue is with item 5. When I save a plan, I add the model to the collection then redirect to the initial view. At this point, I fetch data from the server. When I fetch data from the server, this overwrites my collection and my added model is gone. How can I prevent this from happening? I have found a way to do this but it is definitely not the correct way at all. Below you will find my code examples for this. Thanks for the help. PlansListView View: var PlansListView = Backbone.View.extend({ tagName : 'ul', initialize : function() { _.bindAll( this, 'render', 'close' ); //reset the view if the collection is reset this.collection.bind( 'reset', this.render , this ); }, render : function() { _.each( this.collection.models, function( plan ){ $( this.el ).append( new PlansListItemView({ model: plan }).render().el ); }, this ); return this; }, close : function() { $( this.el ).unbind(); $( this.el ).remove(); } });//end NewPlanView Save Method var NewPlanView = Backbone.View.extend({ tagName : 'section', template : _.template( $( '#plan-form-template' ).html() ), events : { 'click button.save' : 'savePlan', 'click button.cancel' : 'cancel' }, intialize: function() { _.bindAll( this, 'render', 'save', 'cancel' ); }, render : function() { $( '#container' ).append( $( this.el ).html(this.template( this.model.toJSON() )) ); return this; }, savePlan : function( event ) { this.model.set({ name : 'bad plan', date : 'friday', desc : 'blah', id : Math.floor(Math.random()*11), total_stops : '2' }); this.collection.add( this.model ); app.navigate('', true ); event.preventDefault(); }, cancel : function(){} }); Router (default method): index : function() { this.container.empty(); var self = this; //This is a hack to get this to work //on default page load fetch all plans from the server //if the page has loaded ( this.plans is defined) set the updated plans collection to the view //There has to be a better way!! if( ! this.plans ) { this.plans = new Plans(); this.plans.fetch({ success: function() { self.plansListView = new PlansListView({ collection : self.plans }); $( '#container' ).append( self.plansListView.render().el ); if( self.requestedID ) self.planDetails( self.requestedID ); } }); } else { this.plansListView = new PlansListView({ collection : this.plans }); $( '#container' ).append( self.plansListView.render().el ); if( this.requestedID ) self.planDetails( this.requestedID ); } }, New Plan Route: newPlan : function() { var plan = new Plan({name: 'Cool Plan', date: 'Monday', desc: 'This is a great app'}); this.newPlan = new NewPlanView({ model : plan, collection: this.plans }); this.newPlan.render(); } FULL CODE ( function( $ ){ var Plan = Backbone.Model.extend({ defaults: { name : '', date : '', desc : '' } }); var Plans = Backbone.Collection.extend({ model : Plan, url : '/data/' }); $( document ).ready(function( e ){ var PlansListView = Backbone.View.extend({ tagName : 'ul', initialize : function() { _.bindAll( this, 'render', 'close' ); //reset the view if the collection is reset this.collection.bind( 'reset', this.render , this ); }, render : function() { _.each( this.collection.models, function( plan ){ $( this.el ).append( new PlansListItemView({ model: plan }).render().el ); }, this ); return this; }, close : function() { $( this.el ).unbind(); $( this.el ).remove(); } });//end var PlansListItemView = Backbone.View.extend({ tagName : 'li', template : _.template( $( '#list-item-template' ).html() ), events :{ 'click a' : 'listInfo' }, render : function() { $( this.el ).html( this.template( this.model.toJSON() ) ); return this; }, listInfo : function( event ) { } });//end var PlanView = Backbone.View.extend({ tagName : 'section', events : { 'click button.add-plan' : 'newPlan' }, template: _.template( $( '#plan-template' ).html() ), initialize: function() { _.bindAll( this, 'render', 'close', 'newPlan' ); }, render : function() { $( '#container' ).append( $( this.el ).html( this.template( this.model.toJSON() ) ) ); return this; }, newPlan : function( event ) { app.navigate( 'newplan', true ); }, close : function() { $( this.el ).unbind(); $( this.el ).remove(); } });//end var NewPlanView = Backbone.View.extend({ tagName : 'section', template : _.template( $( '#plan-form-template' ).html() ), events : { 'click button.save' : 'savePlan', 'click button.cancel' : 'cancel' }, intialize: function() { _.bindAll( this, 'render', 'save', 'cancel' ); }, render : function() { $( '#container' ).append( $( this.el ).html(this.template( this.model.toJSON() )) ); return this; }, savePlan : function( event ) { this.model.set({ name : 'bad plan', date : 'friday', desc : 'blah', id : Math.floor(Math.random()*11), total_stops : '2' }); this.collection.add( this.model ); app.navigate('', true ); event.preventDefault(); }, cancel : function(){} }); var AppRouter = Backbone.Router.extend({ container : $( '#container' ), routes : { '' : 'index', 'viewplan/:id' : 'planDetails', 'newplan' : 'newPlan' }, initialize: function(){ }, index : function() { this.container.empty(); var self = this; //This is a hack to get this to work //on default page load fetch all plans from the server //if the page has loaded ( this.plans is defined) set the updated plans collection to the view //There has to be a better way!! if( ! this.plans ) { this.plans = new Plans(); this.plans.fetch({ success: function() { self.plansListView = new PlansListView({ collection : self.plans }); $( '#container' ).append( self.plansListView.render().el ); if( self.requestedID ) self.planDetails( self.requestedID ); } }); } else { this.plansListView = new PlansListView({ collection : this.plans }); $( '#container' ).append( self.plansListView.render().el ); if( this.requestedID ) self.planDetails( this.requestedID ); } }, planDetails : function( id ) { if( this.plans ) { this.plansListView.close(); this.plan = this.plans.get( id ); if( this.planView ) this.planView.close(); this.planView = new PlanView({ model : this.plan }); this.planView.render(); } else{ this.requestedID = id; this.index(); } if( ! this.plans ) this.index(); }, newPlan : function() { var plan = new Plan({name: 'Cool Plan', date: 'Monday', desc: 'This is a great app'}); this.newPlan = new NewPlanView({ model : plan, collection: this.plans }); this.newPlan.render(); } }); var app = new AppRouter(); Backbone.history.start(); }); })( jQuery );

    Read the article

  • C++ reading and writing and writing files

    - by user320950
    Write a program that processes a list of items purchased with a receipt List in itemlist.txt just items different numbers Prices in pricelist.txt have items and prices in them, different # Make file output file that has receipt Print message saying program ran- have not done If item not in pricelist, report error, count errors display at end Don't know how many items or prices Close file and clear because of running many these files many times This program wont write to the files like so the above is what i have to do #include<iostream>`enter code here` #include<fstream> #include<cstdlib> #include<iomanip> using namespace std; int main() { ifstream in_stream; // reads itemlist.txt ofstream out_stream1; // writes in items.txt ifstream in_stream2; // reads pricelist.txt ofstream out_stream3;// writes in plist.txt ifstream in_stream4;// read recipt.txt ofstream out_stream5;// write display.txt double price=' ',curr_total=0.0; int wrong=0; int itemnum=' '; char next; in_stream.open("ITEMLIST.txt", ios::in); // list of avaliable items out_stream1.open("listWititems.txt", ios::out); // list of avaliable items in_stream2.open("PRICELIST.txt", ios::in); out_stream3.open("listWitdollars.txt", ios::out); in_stream4.open("display.txt", ios::in); out_stream5.open("showitems.txt", ios::out); in_stream.setf(ios::fixed); while(!in_stream.eof()) { in_stream >> itemnum; cin.clear(); cin >> next; } out_stream1.setf(ios::fixed); while (!out_stream1.eof()) { out_stream1 << itemnum; cin.clear(); cin >> next; } in_stream2.setf(ios::fixed); in_stream2.setf(ios::showpoint); in_stream2.precision(2); while (!in_stream2.eof()) // reads file to end of file { while((price== (price*1.00)) && (itemnum == (itemnum*1))) { in_stream2 >> itemnum >> price; itemnum++; price++; curr_total= price++; in_stream2 >> curr_total; cin.clear(); // allows more reading cin >> next; return itemnum, price; } } out_stream3.setf(ios::fixed); out_stream3.setf(ios::showpoint); out_stream3.precision(2); while (!out_stream3.eof()) // reads file to end of file { while((price== (price*1.00)) && (itemnum == (itemnum*1))) { out_stream3 << itemnum << price; itemnum++; price++; curr_total= price++; out_stream3 << curr_total; cin.clear(); // allows more reading cin >> next; return itemnum, price; } } in_stream4.setf(ios::fixed); in_stream4.setf(ios::showpoint); in_stream4.precision(2); while (!in_stream4.eof()) { in_stream4 >> itemnum >> price >> curr_total; cin.clear(); cin >> next; } out_stream5.setf(ios::fixed); out_stream5.setf(ios::showpoint); out_stream5.precision(2); out_stream5 <<setw(5)<< " itemnum " <<setw(5)<<" price "<<setw(5)<<" curr_total " <<endl; // sends items and prices to receipt.txt out_stream5 << setw(5) << itemnum << setw(5) <<price << setw(5)<< curr_total; // sends items and prices to receipt.txt out_stream5 << " You have a total of " << wrong++ << " errors " << endl; in_stream.close(); // closing files. out_stream1.close(); in_stream2.close(); out_stream3.close(); in_stream4.close(); out_stream5.close(); system("pause"); }

    Read the article

  • Embedding generic sql queries into c# program

    - by Pooja Balkundi
    Okay referring to my first question code in the main, I want the user to enter employee name at runtime and then i take this name which user has entered and compare it with the e_name of my emp table , if it exists i want to display all information of that employee , how can I achieve this ? using System; using System.Collections.Generic; using System.Linq; using System.Windows.Forms; using MySql.Data.MySqlClient; namespace ConnectCsharppToMySQL { public class DBConnect { private MySqlConnection connection; private string server; private string database; private string uid; private string password; string name; //Constructor public DBConnect() { Initialize(); } //Initialize values private void Initialize() { server = "localhost"; database = "test"; uid = "root"; password = ""; string connectionString; connectionString = "SERVER=" + server + ";" + "DATABASE=" + database + ";" + "UID=" + uid + ";" + "PASSWORD=" + password + ";"; connection = new MySqlConnection(connectionString); } //open connection to database private bool OpenConnection() { try { connection.Open(); return true; } catch (MySqlException ex) { //When handling errors, you can your application's response based //on the error number. //The two most common error numbers when connecting are as follows: //0: Cannot connect to server. //1045: Invalid user name and/or password. switch (ex.Number) { case 0: MessageBox.Show("Cannot connect to server. Contact administrator"); break; case 1045: MessageBox.Show("Invalid username/password, please try again"); break; } return false; } } //Close connection private bool CloseConnection() { try { connection.Close(); return true; } catch (MySqlException ex) { MessageBox.Show(ex.Message); return false; } } //Insert statement public void Insert() { string query = "INSERT INTO emp (e_name, age) VALUES('Pooja R', '21')"; //open connection if (this.OpenConnection() == true) { //create command and assign the query and connection from the constructor MySqlCommand cmd = new MySqlCommand(query, connection); //Execute command cmd.ExecuteNonQuery(); //close connection this.CloseConnection(); } } //Update statement public void Update() { string query = "UPDATE emp SET e_name='Peachy', age='22' WHERE e_name='Pooja R'"; //Open connection if (this.OpenConnection() == true) { //create mysql command MySqlCommand cmd = new MySqlCommand(); //Assign the query using CommandText cmd.CommandText = query; //Assign the connection using Connection cmd.Connection = connection; //Execute query cmd.ExecuteNonQuery(); //close connection this.CloseConnection(); } } //Select statement public List<string>[] Select() { string query = "SELECT * FROM emp where e_name=(/*I WANT USER ENTERED NAME TO GET INSERTED HERE*/)"; //Create a list to store the result List<string>[] list = new List<string>[3]; list[0] = new List<string>(); list[1] = new List<string>(); list[2] = new List<string>(); //Open connection if (this.OpenConnection() == true) { //Create Command MySqlCommand cmd = new MySqlCommand(query, connection); //Create a data reader and Execute the command MySqlDataReader dataReader = cmd.ExecuteReader(); //Read the data and store them in the list while (dataReader.Read()) { list[0].Add(dataReader["e_id"] + ""); list[1].Add(dataReader["e_name"] + ""); list[2].Add(dataReader["age"] + ""); } //close Data Reader dataReader.Close(); //close Connection this.CloseConnection(); //return list to be displayed return list; } else { return list; } } public static void Main(String[] args) { DBConnect db1 = new DBConnect(); Console.WriteLine("Initializing"); db1.Initialize(); Console.WriteLine("Search :"); Console.WriteLine("Enter the employee name"); db1.name = Console.ReadLine(); db1.Select(); Console.ReadLine(); } } }

    Read the article

  • java socket programming problem

    - by mk.persia
    Hi, what's wrong with my code? sorry about my bad English package sockettest; import java.io.*; import java.net.*; class sevr implements Runnable{ public void run() { ServerSocket sSkt = null; Socket skt = null; BufferedReader br = null; BufferedWriter bw = null; try{ System.out.println("Server: is about to create socket"); sSkt = new ServerSocket(6666); System.out.println("Server: socket created"); } catch(IOException e){ System.out.println("Server: socket creation failure"); } try{ System.out.println("Server: is listening"); skt = sSkt.accept(); System.out.println("Server: Connection Established"); } catch(IOException e){ System.out.println("Server: listening failed"); } try{ System.out.println("Server: creating streams"); br = new BufferedReader(new InputStreamReader(skt.getInputStream())); bw = new BufferedWriter(new OutputStreamWriter(skt.getOutputStream())); System.out.println("Server: stream done"); } catch(IOException e){ System.out.println("Server: stream failed"); } System.out.println("Server: reading the request"); try{ String line = null; while((line =br.readLine()) != null){ System.out.println("Server: client said- "+ line); } } catch(IOException e){ System.out.println("Server: reading failed"); } System.out.println("Server: reading fished"); System.out.println("Server: responding"); try{ bw.write("Hi! I am server!"); } catch(IOException e){ System.out.println("Server: responding failed"); } System.out.println("Server: responding finished"); System.out.println("Server: is finishing"); try { br.close(); bw.close(); skt.close(); sSkt.close(); } catch (IOException e) { System.out.println("Server: finishing failed"); } System.out.println("Server: done"); } } class clnt implements Runnable{ public void run() { Socket skt = null; BufferedReader br = null; BufferedWriter bw = null; try{ System.out.println("Client: about to create socket"); skt = new Socket(InetAddress.getLocalHost(),6666); System.out.println("Client: socket created"); } catch(IOException e){ System.out.println("Client: socket creation failure"); } try{ System.out.println("Client: creating streams"); br = new BufferedReader(new InputStreamReader(skt.getInputStream())); bw = new BufferedWriter(new OutputStreamWriter(skt.getOutputStream())); System.out.println("Client: stream done"); } catch(IOException e){ System.out.println("Client: stream failed"); } System.out.println("Client: requesting"); try{ bw.write("Hi! I am Client!"); } catch(IOException e){ System.out.println("Client: requesting failed"); } System.out.println("Client: requesting finished"); System.out.println("Client: reading the respond"); try{ String line = null; while((line =br.readLine()) != null){ System.out.println("Client: server said- "+ line); } } catch(IOException e){ System.out.println("Client: reading failed"); } System.out.println("Client: reading fished"); System.out.println("Clientrver: is finishing"); try { br.close(); bw.close(); skt.close(); } catch (IOException e) { System.out.println("Client: finishing failed"); } System.out.println("Client: done"); } } public class Main { public static void main(String[] args) { System.out.println("Main started"); Thread sThread = new Thread(new sevr()); Thread cThread = new Thread(new clnt()); sThread.start(); cThread.start(); try { sThread.join(); cThread.join(); } catch (InterruptedException ex) { System.out.println("joining failed"); } System.out.println("Main done"); } } output: Main started Server: is about to create socket Client: about to create socket Client: socket created Client: creating streams Server: socket created Server: is listening Server: Connection Established Server: creating streams Server: stream done Server: reading the request Client: stream done Client: requesting Client: requesting finished Client: reading the respond and it waits here forever!

    Read the article

  • dell E6500 laptop will not hibernate/standby

    - by Mark Schultheiss
    I am using a Dell E6500 laptop with windows XP on it, it was originally tagged/installed with Windows Vista. My issue is, when I close the lid, it will not either Hibernate or Standby. If I close the lid with either of these options, I then have to startup from scratch, and anything I had open is not open. I just want to close the lid, have it keep what I have running, not use power util I open the lid again and start it up (with the stuff still open I had open of course). Suggestions?

    Read the article

  • Excel how to get an average for column for rows that meet multiple criteria

    - by Jess
    I would like to know the average days between open and close dates for an item with a close date in a particular month. So from the below example in Jan 2013 items 2,5 and 6 were closed (Closed can be RESOLVED or CANCELLED status), each were open for 26, 9 and 6 days respectivly. So of the jobs that have a closed date in Jan 2013 (between 01/01/2013 and 13/02/13) they have an average open time (between open and close date) of 13.67 days to 2dp. I have tried a few ways to get this to work and i think the issue I am having is with the AVERAGE function. First time using a forum so apologies if my question is unclear. Was unable to post image to have this comma seperated below Item_ID,Open_Date,Status,Close_Date 1,1/06/2012,RESOLVED,16/07/2012 2,20/12/2012,RESOLVED,16/01/2013 3,2/01/2013,IN PROGRESS, 4,3/01/2013,CANCELLED,7/05/2013 5,3/01/2013,RESOLVED,12/01/2013 6,4/01/2013,RESOLVED,10/01/2013 7,1/02/2013,RESOLVED,15/02/2013 8,2/02/2013,OPEN, 9,7/02/2013,CANCELLED,26/02/2013

    Read the article

  • Outlook attachment save prompt behavior

    - by kara-marfia
    It seems they've put some Clippy-like behavior into Outlook 07. Assume you open an email message and open its attachment, given that you make no changes to the message or the attachment. If you close the attachment, then close the email - works as expected Close email - prompted to save changes to attachment I have some clerical users, and they tend to believe what the computer tells them. In this case, I'm having a hard time determining the reason someone determined that Outlook should lie in this case, and prompt someone to save a file that hasn't changed. Regardless, I've only been able to find examples of people failing to find a fix for this. Anyone have ideas? edit: I should have clarified, I suppose I'm looking for a workarounnd, as it's consistently reproduceable for any machine, and I suspect is therefore "working as intended"

    Read the article

  • Is it possible to rename an open Word document without closing it?

    - by RoboShop
    I just ask this question as I do not believe that after so many versions of Word, it wouldn't exist. Usually when I'm working on a document and I realize I have to rename it, I have to close the document down, go to file explorer and then rename it, and then opening it up again. It's a procedure that's so ingrained in my usage pattern that I didn't realize until now that I'm actually having to open and close multiple windows/ applications etc. simply to rename a file. Surely, it's the year 2012, I should be able to do a simple thing like that with a few clicks right? So is there a way to just rename the file name of a word /excel / office document without having to close it first?

    Read the article

  • Closing telnet connection gracefully from session mode itself without going to telnet prompt.

    - by Kumar Alok
    a normal telnet connection is like this: telnet localhost 22 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2 ^] telnet close Connection closed. I want to close it from telnet session itself without coming to telnet prompt by pressing. My requirement is that if i press some control character from telnet session itself like CTRL+A so it will come out of session and close it automatically. something like this: $ telnet localhost 22 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. SSH-2.0-OpenSSH_4.2 ^A Connection closed. $ I tried all the options given at the man page and tried to do some $HOME/.telnetrc file tests but couldn't achieve it, as telnetrc will execute all the commands written in it with the given host whenever a telnet to that host is done. Can anyone help me in this, like how it can be achieved.

    Read the article

  • When to use delaycompress option in logrotate?

    - by Anand Chitipothu
    The man page of logrotate says that: It can be used when some program cannot be told to close its logfile and thus might continue writing to the previous log file for some time. I'm confused by this. If a program cannot be told to close its logfile, it will continue to write forever, not for sometime. If the compression is postponed to next rotation cycle, the program continues to write to that file even after the next rotation cycle. How is postponing solving the problem? My understanding is that copytruncate should be used when a program cannot be told to close the logfile. I'm aware that some data written to the logfile gets lost when the copy is in progress. I was looking at the logrotate file for couchdb, and it had both copytruncate and delaycompress options. /usr/local/couchdb-1.0.1/var/log/couchdb/*.log { weekly rotate 10 copytruncate delaycompress compress notifempty missingok } It looks like there is no point using delaycompress when copytruncate is already there. What am I missing?

    Read the article

  • Setup dual screen with Catalyst Control Center on notebook so that nothing changes when closing lid (case) ?

    - by Tom
    I have setup a dualscreen setup for my notebook with an ATI video card (ATI mobility radeon hd 5470) using Catalyst Control Center. The monitor extends the desktop of the notebook's screen. This works great. I am running on windows 7 and have set it up to not do anything when I close my laptop's lid (case) other than dim the notebook's display. However, when I do close the lid (notebook's display), the second monitor suddenly changes and I believe it starts behaving as the primary monitor.. I do not want this to happen. So, how do I setup my dualscreen setup so that it won't set the secondary monitor as the primary one when I close my laptop's lid? UPDATE: this video shows exactly what my problem is: http://www.youtube.com/watch?v=Q1ygNHbqI2g

    Read the article

  • Graceful logout in dwm

    - by Riateche
    I want dwm to close all windows gracefully when I press quit hotkey. I like Unity behaviour: it displays list of windows denying logout (for example, editors with unsaved changes) and do not logout before all issues are resolved and applications are closed. By default, dwm just end X session and all running applications are killed. I was thinking about writing a script that will retrieve list of all windows, gracefully close them and wait for their processes to finish. But I even don't know how to close windows. The only way I know is using wmctrl, and this utility doesn't work with dwm.

    Read the article

  • Filemaker show total from related table

    - by Mr_Chimp
    I have a bit of experience with Access and SQL but I'm new to Filemaker. I have a layout which shows a list of projects. One of the fields I want it to show is "total amount of paid invoices up to the end of the last financial year". The invoices are stored on another table so I will need to pick from this table all records where "project id" = "project id" (this is set up as a relationship between the tables) and also "invoice is paid" = yes AND "date invoice paid" < start of last financial year. My question is how do I go about getting and showing that data? I can get a total easily enough, it's filtering out these specific rows that I'm having trouble with. I'm guessing there's an easy solution...

    Read the article

  • Is there an intuitive way to reopen Empathy's contact list?

    - by aef
    Since a short while I'm using Ubuntu Oneiric Ocelot (11.10) with gnome-shell (Gnome 3) and I'm trying to get accustomed to the default Empathy Instant Messaging client. When I hit the close button of Empathy's contact list the window disappears as expected. When I now start Empathy over the Gnome Activities menu the contact list reappears. That's not as easy as clicking a system tray icon back in Psi on Gnome 2 but it works for now. But when I start a conversation first and have an open conversation window, then close the contact list, and try to regain access to it by using Gnome Activities, I only get the conversation window into focus and no contact list appears. I only seem to be able to get the contact list back if I close the conversation window (and thereby signal the conversations to be over) and then use Gnome Activities again to get my contact list back. That's horrible. Is this intended? Is there something I'm missing?

    Read the article

  • How do I know I'm running inside a linux "screen" or not?

    - by Jun Chen
    The "screen" refers to a program mentioned in How to reconnect to a disconnected ssh session . That is a good facility. But there is a question I'd really like to know. How do I know whether I'm running inside a "screen"? The difference is: If yes, I know I can safely close current terminal window, e.g., close a PuTTY window, without losing my shell(Bash etc) session. If no, I know I have to take care of any pending works before I close the terminal window. Better, I'd like this status to be displayed in PS1 prompt so that I can see it any time automatically.

    Read the article

  • Issue with yum hanging. Strace provided

    - by barrrista
    If I do a simple yum update, it hangs and I get the following strace: etsockname(9, {sa_family=AF_INET, sin_port=htons(41169), sin_addr=inet_addr("hiddenip")}, [38654705680]) = 0 close(9) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 9 connect(9, {sa_family=AF_INET, sin_port=htons(80), sin_addr=inet_addr("hiddenip")}, 16) = 0 getsockname(9, {sa_family=AF_INET, sin_port=htons(46910), sin_addr=inet_addr("hiddenip")}, [38654705680]) = 0 close(9) = 0 socket(PF_INET, SOCK_DGRAM, IPPROTO_IP) = 9 connect(9, {sa_family=AF_INET, sin_port=htons(80), sin_addr=inet_addr("hiddenip")}, 16) = 0 getsockname(9, {sa_family=AF_INET, sin_port=htons(50917), sin_addr=inet_addr("hiddenip")}, [38654705680]) = 0 close(9) = 0 socket(PF_INET, SOCK_STREAM, IPPROTO_TCP) = 9 fcntl(9, F_GETFL) = 0x2 (flags O_RDWR) fcntl(9, F_SETFL, O_RDWR|O_NONBLOCK) = 0 connect(9, {sa_family=AF_INET, sin_port=htons(80), sin_addr=inet_addr("hiddenip")}, 16) = -1 EINPROGRESS (Operation now in progress) select(10, NULL, [9], NULL, {30, 0}

    Read the article

  • dell E6500 laptop will not hibernate/standby

    - by Mark Schultheiss
    I am using a Dell E6500 laptop with windows XP on it, it was originally tagged/installed with Windows Vista. My issue is, when I close the lid, it will not either Hibernate or Standby. If I close the lid with either of these options, I then have to startup from scratch, and anything I had open is not open. I just want to close the lid, have it keep what I have running, not use power util I open the lid again and start it up (with the stuff still open I had open of course). Suggestions?

    Read the article

  • Why do some Flask session values disappear from the session after closing the browser window, but then reappear later without me adding them?

    - by Ben
    So my understanding of Flask sessions is that I can use it like a dictionary and add values to a session by doing: session['key name'] = 'some value here' And that works fine. On a route I have the client call using AJAX post, I assign a value to the session. And it works fine. I can click on various pages of my site and the value stays in the session. If I close the browser window however, and then go back to my site, the session value I had in there is gone. So that's weird and you would think the problem is the session isn't permanent. I also implemented Flask-Openid and that uses the session to store information and that does persist if I close the browser window and open it back up again. I also checked the cookie after closing the browser window, but before going back to my site, and the cookie is indeed still there. Another odd piece of behaviour (which may be related) is that some values I have written to the session for testing purposes will go away when I access the AJAX post route and assign the correct value. So that is odd, but what is truly weird is that when I then close the browser window and open it up again, and have thus lost the value I was trying to retain, the ones that I lost previously actually return! They aren't being reassigned because there's no code in my Python files to reassign those values. Here is some outputs to helper make it clearer. They are all outputed from a route for a real page, and not the AJAX post route I mentioned above. This is the output after I have assigned the value I want to store in the session. The value key is 'userid' - all the other values are dummy ones I have added in trying to solve this problem. 'userid': 8 will stay in the session as long as I don't close the browser window. I can access other routes and the value will stay there just like it should. ['session.=', <SecureCookieSession {'userid': 8, 'test_variable_num': 102, 'adding using before request': 'hi', '_permanent': True, 'test_variable_text': 'hi!'}>] If I do close the browser window, and go back into the site, but without redoing the AJAX post request, I get this output: ['session.=', <SecureCookieSession {'adding using before request': 'hi', '_permanent': True, 'yo': 'yo'}>] The 'yo' value was not in the first first output. I don't know where it came from. I searched my code for 'yo' and there is no instances of me assigning that value anywhere. I think I may have added it to the session days ago. So it seems like it is persisting, but being hidden when the other values are written. And this last one is me accessing the AJAX post route again, and then going to the page that prints out the keys using debug. Same output as the first output I pasted above, which you would expect, and the 'yo' value is gone again (but it will come back if I close the browser window) ['session.=', <SecureCookieSession {'userid': 8, 'test_variable_num': 102, 'adding using before request': 'hi', '_permanent': True, 'test_variable_text': 'hi!'}>] I tested this in both Chrome and Firefox. So I find this all weird and I am guessing it stems from a misunderstanding of how sessions work. I think they're dictionaries and I can write dictionary values into them and retrieve them days later as long as I set the session to permanent and the cookie doesn't get deleted. Any ideas why this weird behaviour is happening?

    Read the article

  • Data adapter not filling my dataset

    - by Doug Ancil
    I have the following code: Imports System.Data.SqlClient Public Class Main Protected WithEvents DataGridView1 As DataGridView Dim instForm2 As New Exceptions Private Sub Button1_Click_1(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles startpayrollButton.Click Dim ssql As String = "select MAX(payrolldate) AS [payrolldate], " & _ "dateadd(dd, ((datediff(dd, '17530107', MAX(payrolldate))/7)*7)+7, '17530107') AS [Sunday]" & _ "from dbo.payroll" & _ " where payrollran = 'no'" Dim oCmd As System.Data.SqlClient.SqlCommand Dim oDr As System.Data.SqlClient.SqlDataReader oCmd = New System.Data.SqlClient.SqlCommand Try With oCmd .Connection = New System.Data.SqlClient.SqlConnection("Initial Catalog=mdr;Data Source=xxxxx;uid=xxxxx;password=xxxxx") .Connection.Open() .CommandType = CommandType.Text .CommandText = ssql oDr = .ExecuteReader() End With If oDr.Read Then payperiodstartdate = oDr.GetDateTime(1) payperiodenddate = payperiodstartdate.AddSeconds(604799) Dim ButtonDialogResult As DialogResult ButtonDialogResult = MessageBox.Show(" The Next Payroll Start Date is: " & payperiodstartdate.ToString() & System.Environment.NewLine & " Through End Date: " & payperiodenddate.ToString()) If ButtonDialogResult = Windows.Forms.DialogResult.OK Then exceptionsButton.Enabled = True startpayrollButton.Enabled = False End If End If oDr.Close() oCmd.Connection.Close() Catch ex As Exception MessageBox.Show(ex.Message) oCmd.Connection.Close() End Try End Sub Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles exceptionsButton.Click Dim connection As System.Data.SqlClient.SqlConnection Dim adapter As System.Data.SqlClient.SqlDataAdapter = New System.Data.SqlClient.SqlDataAdapter Dim connectionString As String = "Initial Catalog=mdr;Data Source=xxxxx;uid=xxxxx;password=xxxxx" Dim ds As New DataSet Dim _sql As String = "SELECT [Exceptions].Employeenumber,[Exceptions].exceptiondate, [Exceptions].starttime, [exceptions].endtime, [Exceptions].code, datediff(minute, starttime, endtime) as duration INTO scratchpad3" & _ " FROM Employees INNER JOIN Exceptions ON [Exceptions].EmployeeNumber = [Exceptions].Employeenumber" & _ " where [Exceptions].exceptiondate between @payperiodstartdate and @payperiodenddate" & _ " GROUP BY [Exceptions].Employeenumber, [Exceptions].Exceptiondate, [Exceptions].starttime, [exceptions].endtime," & _ " [Exceptions].code, [Exceptions].exceptiondate" connection = New SqlConnection(connectionString) connection.Open() Dim _CMD As SqlCommand = New SqlCommand(_sql, connection) _CMD.Parameters.AddWithValue("@payperiodstartdate", payperiodstartdate) _CMD.Parameters.AddWithValue("@payperiodenddate", payperiodenddate) adapter.SelectCommand = _CMD Try adapter.Fill(ds) If ds Is Nothing OrElse ds.Tables.Count = 0 OrElse ds.Tables(0).Rows.Count = 0 Then 'it's empty MessageBox.Show("There was no data for this time period. Press Ok to continue", "No Data") connection.Close() Exceptions.saveButton.Enabled = False Exceptions.Hide() Else connection.Close() End If Catch ex As Exception MessageBox.Show(ex.ToString) connection.Close() End Try Exceptions.Show() End Sub Private Sub payrollButton_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles payrollButton.Click Payrollfinal.Show() End Sub End Class and when I run my program and press this button Private Sub Button2_Click(ByVal sender As System.Object, ByVal e As System.EventArgs) Handles exceptionsButton.Click I have my date range within a time that I know that my dataset should produce a result, but when I put a line break in my code here: adapter.Fill(ds) and look at it in debug, I show a table value of 0. If I run the same query that I have to produce these results in sql analyser, I see 1 result. Can someone see why my query on my form produces a different result than the sql analyser does? Also here is my schema for my two tables: Exceptions employeenumber varchar no 50 yes no no SQL_Latin1_General_CP1_CI_AS exceptiondate datetime no 8 yes (n/a) (n/a) NULL starttime datetime no 8 yes (n/a) (n/a) NULL endtime datetime no 8 yes (n/a) (n/a) NULL duration varchar no 50 yes no no SQL_Latin1_General_CP1_CI_AS code varchar no 50 yes no no SQL_Latin1_General_CP1_CI_AS approvedby varchar no 50 yes no no SQL_Latin1_General_CP1_CI_AS approved varchar no 50 yes no no SQL_Latin1_General_CP1_CI_AS time timestamp no 8 yes (n/a) (n/a) NULL employees employeenumber varchar no 50 no no no SQL_Latin1_General_CP1_CI_AS name varchar no 50 no no no SQL_Latin1_General_CP1_CI_AS initials varchar no 50 no no no SQL_Latin1_General_CP1_CI_AS loginname1 varchar no 50 yes no no SQL_Latin1_General_CP1_CI_AS

    Read the article

  • Android inserting into SQLite JSON object

    - by Nizmon
    I'm trying to insert the below json response from a server into my sqlite DB and then read from the DB. The problem I am getting is that when I run my code it compiles fine and runs with no errors. But when trying to read from the DB I just get back what seems like an empty string so I know that the table is being created. I have the correct permissions within the manifest. I have also reference all my classes within there. {"locations": [{"locations":"Newcastle","location_id":"1"},{"locations":"London","location_id":"2"},{"locations":"Sunderland","location_id":"3"}]} Below where I use: Log.v("one", one); Log.v("two", two); below It only prints out the first set within the JSON object so Newcastle and 1. I don't get any errors at all which is stumping me. When I call the method getName within the Location class I just seem to get a blank string back! // This class creates the table as well as inserts and returns data from the sqlite DB public class Location { private DatabaseHelper mDbHelper; private SQLiteDatabase mDb; private final Context mCtx; private static final String vd_location = ("CREATE TABLE " + TABLE_VD_LOCATION + " (" + LOCATION + " TEXT," + LOCATION_ID + " TEXT " +");"); private static class DatabaseHelper extends SQLiteOpenHelper { DatabaseHelper(Context context) { super(context, DATABASE_NAME, null, DATABASE_VERSION); } @Override public void onCreate(SQLiteDatabase db) { db.execSQL(vd_location); } @Override public void onUpgrade(SQLiteDatabase db, int oldVersion, int newVersion) { } } public Location(Context ctx) { this.mCtx = ctx; } public Location open() throws SQLException { this.mDbHelper = new DatabaseHelper(this.mCtx); this.mDb = this.mDbHelper.getWritableDatabase(); return this; } public void close() { this.mDbHelper.close(); } public void addOffer (JSONObject json){ try{ JSONArray earthquakes = json.getJSONArray("offers"); for(int i=0;i<earthquakes.length();i++){ open(); JSONObject e = earthquakes.getJSONObject(i); String one = e.getString("locations"); String two = e.getString("location_id"); Log.v("one", one); Log.v("two", two); mDb.execSQL("INSERT INTO " + TABLE_VD_LOCATION + " ( locations, location_id ) " + "VALUES (?, ?)", new Object [] { e.getString("locations"), e.getString("location_id")}); close(); } }catch(Exception e){ }finally{ close(); } } public String getName(long l) throws SQLException{ String[] columns = new String[]{ LOCATION, LOCATION_ID}; Cursor c = mDb.query(TABLE_VD_LOCATION, columns, null, null, null, null, null); String result = ""; int iRow = c.getColumnIndex(LOCATION); int iName = c.getColumnIndex(LOCATION_ID); for (c.moveToFirst(); !c.isAfterLast(); c.moveToNext()){ result = result + c.getString(iRow) + " " + c.getString(iName) + " " + "\n"; } return result; } } // This code reads from the DB, this is just some very hacked together code so excuse it, it also works when used on other tables public void getData(){ boolean didItWork = true; try { Location loc = new Location(this); loc.open(); String data = loc.getName(0); loc.close(); Dialog t = new Dialog(this); t.setTitle("get" + data); t.show(); } catch (Exception e) { didItWork = false; String error = e.toString(); Dialog d = new Dialog(this); d.setTitle("Dang it!"); TextView tv = new TextView(this); tv.setText(error); d.setContentView(tv); d.show(); } finally { if (didItWork) { Dialog d = new Dialog(this); d.setTitle("Heck Yea!"); TextView tv = new TextView(this); tv.setText("Success"); d.setContentView(tv); d.show(); //entry.close(); } } }

    Read the article

  • Doesn't get the output in Java Database Connectivity

    - by Dooree
    I'm working on Java Database Connectivity through Eclipse IDE. I built a database through Ubuntu Terminal, and I need to connect and work with it. However, when I tried to run the following code, I don't get any error, but the following output is showed, anybody knows why I don't get the output from the code ? //STEP 1. Import required packages import java.sql.*; public class FirstExample { // JDBC driver name and database URL static final String JDBC_DRIVER = "com.mysql.jdbc.Driver"; static final String DB_URL = "jdbc:mysql://localhost/EMP"; // Database credentials static final String USER = "username"; static final String PASS = "password"; public static void main(String[] args) { Connection conn = null; Statement stmt = null; try{ //STEP 2: Register JDBC driver Class.forName("com.mysql.jdbc.Driver"); //STEP 3: Open a connection System.out.println("Connecting to database..."); conn = DriverManager.getConnection(DB_URL,USER,PASS); //STEP 4: Execute a query System.out.println("Creating statement..."); stmt = conn.createStatement(); String sql; sql = "SELECT id, first, last, age FROM Employees"; ResultSet rs = stmt.executeQuery(sql); //STEP 5: Extract data from result set while(rs.next()){ //Retrieve by column name int id = rs.getInt("id"); int age = rs.getInt("age"); String first = rs.getString("first"); String last = rs.getString("last"); //Display values System.out.print("ID: " + id); System.out.print(", Age: " + age); System.out.print(", First: " + first); System.out.println(", Last: " + last); } //STEP 6: Clean-up environment rs.close(); stmt.close(); conn.close(); }catch(SQLException se){ //Handle errors for JDBC se.printStackTrace(); }catch(Exception e){ //Handle errors for Class.forName e.printStackTrace(); }finally{ //finally block used to close resources try{ if(stmt!=null) stmt.close(); }catch(SQLException se2){ }// nothing we can do try{ if(conn!=null) conn.close(); }catch(SQLException se){ se.printStackTrace(); }//end finally try }//end try System.out.println("Goodbye!"); }//end main }//end FirstExample <ConnectionProperties> <PropertyCategory name="Connection/Authentication"> <Property name="user" required="No" default="" sortOrder="-2147483647" since="all"> The user to connect as </Property> <Property name="password" required="No" default="" sortOrder="-2147483646" since="all"> The password to use when connecting </Property> <Property name="socketFactory" required="No" default="com.mysql.jdbc.StandardSocketFactory" sortOrder="4" since="3.0.3"> The name of the class that the driver should use for creating socket connections to the server. This class must implement the interface 'com.mysql.jdbc.SocketFactory' and have public no-args constructor. </Property> <Property name="connectTimeout" required="No" default="0" sortOrder="9" since="3.0.1"> Timeout for socket connect (in milliseconds), with 0 being no timeout. Only works on JDK-1.4 or newer. Defaults to '0'. </Property> ...

    Read the article

  • External Monitors shut off when Laptop Lid closes

    - by John Lanz
    I have researched the solution... gconftool-2 --type string --set /apps/gnome-power-manager/buttons/lid_ac "nothing" does not fix it. I have two external monitors and when I close my lid the settings are reset and the laptop's monitor is set to the default. Thanks! gsettings list-recursively org.gnome.settings-daemon.plugins.power org.gnome.settings-daemon.plugins.power active true org.gnome.settings-daemon.plugins.power button-hibernate 'nothing' org.gnome.settings-daemon.plugins.power button-power 'nothing' org.gnome.settings-daemon.plugins.power button-sleep 'nothing' org.gnome.settings-daemon.plugins.power button-suspend 'nothing' org.gnome.settings-daemon.plugins.power critical-battery-action 'suspend' org.gnome.settings-daemon.plugins.power idle-brightness 30 org.gnome.settings-daemon.plugins.power idle-dim-ac false org.gnome.settings-daemon.plugins.power idle-dim-battery true org.gnome.settings-daemon.plugins.power idle-dim-time 10 org.gnome.settings-daemon.plugins.power lid-close-ac-action 'nothing' org.gnome.settings-daemon.plugins.power lid-close-battery-action 'nothing' org.gnome.settings-daemon.plugins.power notify-perhaps-recall true org.gnome.settings-daemon.plugins.power percentage-action 2 org.gnome.settings-daemon.plugins.power percentage-critical 3 org.gnome.settings-daemon.plugins.power percentage-low 10 org.gnome.settings-daemon.plugins.power priority 1 org.gnome.settings-daemon.plugins.power sleep-display-ac 600 org.gnome.settings-daemon.plugins.power sleep-display-battery 600 org.gnome.settings-daemon.plugins.power sleep-inactive-ac false org.gnome.settings-daemon.plugins.power sleep-inactive-ac-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-ac-type 'suspend' org.gnome.settings-daemon.plugins.power sleep-inactive-battery true org.gnome.settings-daemon.plugins.power sleep-inactive-battery-timeout 0 org.gnome.settings-daemon.plugins.power sleep-inactive-battery-type 'suspend' org.gnome.settings-daemon.plugins.power time-action 120 org.gnome.settings-daemon.plugins.power time-critical 300 org.gnome.settings-daemon.plugins.power time-low 1200 org.gnome.settings-daemon.plugins.power use-time-for-policy true

    Read the article

  • Advise on how to move from a .net developer role to a web developer role

    - by dermd
    I've been working primarily as a .net developer for the past 4 years for a financial services company. I've worked on .net 1.1, 2.0, 3.5 and have done the 3.5 enterprise app developer cert (not that that's worth a whole lot!). Before that I worked as a java developer with a bit of Flex thrown in for just over a year. My educational background is an Electronic and computer engineering degree, a higher diploma in systems analysis as well as one in web development (this was mainly java - JSP, Spring, etc) and a science masters in software design and development. I really feel like a change and would like to move to a different field to experience something different. I've done some courses in RoR and played around with it a bit in my spare time. Similarly I've done various web and mobile courses and done up some mobile webapps along with android and ios equivalents (haven't tried pushing them up to the app stores yet but may be worth tidying them up and doing that). I currently work long enough hours so find it hard to find time to work on too many side projects to get a decent portfolio together. But when I do work on the web stuff I do find it really enjoyable so think it's something I'd like to do full time. However, since my experience is pretty much all .net and financial services I find it very hard to get my foot in the door anywhere or get past a phone screen unless their specifically looking for someone with .net knowledge. What is the best way to move into a web development role without starting from scratch again. I do think a lot of the skills I have translate over but I seem to just get paired with .net jobs whenever I look around? Apart from js, jquery, html5, objective C are there any other technologies I should be looking into?

    Read the article

  • How to use SharePoint modal dialog box to display Custom Page Part2

    - by ybbest
    In the first part of the series, I showed you how to display and close a custom page in a SharePoint modal dialog using JavaScript. In this one, I’d like to show you how to display some information after the Modal dialog is closed.You can download the source code here. 1. Firstly, modify the element file as follow <Elements xmlns="http://schemas.microsoft.com/sharepoint/"> <CustomAction Id="ReportConcern" RegistrationType="ContentType" RegistrationId="0x010100866B1423D33DDA4CA1A4639B54DD4642" Location="EditControlBlock" Sequence="107" Title="Display Custom Page" Description="To Display Custom Page in a modal dialog box on this item"> <UrlAction Url="javascript: function emitStatus(messageToDisplay) { statusId = SP.UI.Status.addStatus(messageToDisplay.message + ' ' +messageToDisplay.location ); SP.UI.Status.setStatusPriColor(statusId, 'Green'); } function portalModalDialogClosedCallback(result, value) { if (value !== null) { emitStatus(value); } } var options = { url: '{SiteUrl}' + '/_layouts/YBBEST/TitleRename.aspx?List={ListId}&amp;ID={ItemId}', title: 'Rename title', allowMaximize: false, showClose: true, width: 500, height: 300, dialogReturnValueCallback: portalModalDialogClosedCallback }; SP.UI.ModalDialog.showModalDialog(options);" /> </CustomAction> </Elements> 2. In your code behind, you can implement a close dialog function as below. This will close your modal dialog box once the button is clicked and display a status bar. protected static string GetCloseDialogScript(string message) { var scriptBuilder = new StringBuilder(); scriptBuilder.Append("<script type='text/javascript'>" + "SP.UI.ModalDialog.commonModalDialogClose(1,").Append(message).Append("); </script>"); return scriptBuilder.ToString(); }

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >