Search Results

Search found 3935 results on 158 pages for 'garreth 00'.

Page 43/158 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Ubuntu 12.04 can't detect internal mobile broadband (Gobi 2000)

  - by Anega

  Hi I have been trying Ubuntu to detect and connect using the buit in mobile broadband capability in my HP 110 netbook but until now nothing seems to work Output of lspci command: 00:1e.0 PCI bridge: Intel Corporation 82801 Mobile PCI Bridge (rev e2) 00:1f.0 ISA bridge: Intel Corporation 82801GBM (ICH7-M) LPC Interface Bridge (rev 02) 00:1f.2 SATA controller: Intel Corporation 82801GBM/GHM (ICH7-M Family) SATA Controller [AHCI mode] (rev 02) 01:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01) 02:00.0 Ethernet controller: Atheros Communications Inc. AR8132 Fast Ethernet (rev c0) Output of lsusb command: Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 001 Device 002: ID 1fea:0008 Bus 005 Device 002: ID 03f0:2a1d Hewlett-Packard Bus 001 Device 005: ID 03f0:241d Hewlett-Packard Gobi 2000 Wireless Modem (QDL mode) So far I have been trying what is intended on several pages, trying to update firmware using wine and then moving .mda or whatever files the update package GobiInstaller.mdi throws out. The results are always the same: After running Output of wine msiexec /a GobiInstaller.msi /qb TARGETDIR="c:\temp" fixme:advapi:GetCurrentHwProfileA (0x33fba8) semi-stub fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:win:RegisterDeviceNotificationA (hwnd=0x13e250, filter=0xf7e984,flags=0x00000001) returns a fake device notification handle! fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:heap:HeapSetInformation (nil) 1 (nil) 0 fixme:advapi:RegisterEventSourceW ((null),L"Bonjour Service"): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:winsock:WSAIoctl -> SIO_ADDRESS_LIST_CHANGE request: stub fixme:iphlpapi:DeleteIpForwardEntry (pRoute 0x79e920): stub fixme:iphlpapi:CreateIpForwardEntry (pRoute 0x79e958): stub fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:service:EnumServicesStatusW resume handle not supported fixme:service:EnumServicesStatusW resume handle not supported fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e58c,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub fixme:netapi32:NetGetJoinInformation Semi-stub (null) 0x79e644 0x79e63c fixme:winsock:WSAIoctl WS_SIO_UDP_CONNRESET stub fixme:storage:create_storagefile Storage share mode not implemented. err:msi:ITERATE_Actions Execution halted, action L"_693CD41C_A4A2_4FA1_8888_FC56C9E6E13B" returned 1603 err:rpc:I_RpcGetBuffer no binding err:rpc:I_RpcGetBuffer no binding andres@andres-HP-Mini-110-1100:~/.wine/drive_c/Qualcomm$ fixme:advapi:ReportEventA (0xcafe4242,0x0004,0x0000,0x00000064,(nil),0x0001,0x00000000,0x79e588,(nil)): stub fixme:advapi:ReportEventW (0xcafe4242,0x0004,0x0000,0x00000064, (nil),0x0001,0x00000000,0x12e6d0,(nil)): stub And creates 2 empty folders, I have been trying hard and I am not sure if I am doing it the way it should be. Thanks

  Read the article

• ubuntu 13.04 recognizes usb mobile broadband modem as ethernet connection

  - by Bence Mihalka

  When I plug in my usb mobile broadband modem (ZTE MF-667), in the network manager instead of a mobile broadband connection, I get an ethernet connection, called: Ethernet Network (ZTE WCDMA Technologies MSM), which of course doesn't work. Here is my lsusb output and the relevant parts of dmesg output: lsusb: Bus 001 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 002 Device 002: ID 8087:0024 Intel Corp. Integrated Rate Matching Hub Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 003 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub Bus 004 Device 001: ID 1d6b:0003 Linux Foundation 3.0 root hub Bus 001 Device 003: ID 0cf3:3005 Atheros Communications, Inc. AR3011 Bluetooth Bus 001 Device 004: ID 04f2:b1b9 Chicony Electronics Co., Ltd Asus Integrated Webcam Bus 001 Device 005: ID 058f:6366 Alcor Micro Corp. Multi Flash Reader Bus 002 Device 004: ID 19d2:1405 ZTE WCDMA Technologies MSM dmesg: [ 195.328467] usb 2-1.1: new high-speed USB device number 3 using ehci-pci [ 195.423545] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1225 [ 195.423555] usb 2-1.1: New USB device strings: Mfr=3, Product=2, SerialNumber=4 [ 195.423561] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 195.423567] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 195.423572] usb 2-1.1: SerialNumber: P680A1ZTED000000 [ 195.426319] scsi7 : usb-storage 2-1.1:1.0 [ 196.425354] scsi 7:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 197.447919] usb 2-1.1: USB disconnect, device number 3 [ 197.457582] sr0: scsi3-mmc drive: 243x/186x xa/form2 cdda pop-up [ 197.457594] cdrom: Uniform CD-ROM driver Revision: 3.20 [ 197.459058] sr 7:0:0:0: Attached scsi CD-ROM sr0 [ 197.459483] sr 7:0:0:0: Attached scsi generic sg2 type 5 [ 197.759186] usb 2-1.1: new high-speed USB device number 4 using ehci-pci [ 197.854543] usb 2-1.1: New USB device found, idVendor=19d2, idProduct=1405 [ 197.854556] usb 2-1.1: New USB device strings: Mfr=4, Product=3, SerialNumber=5 [ 197.854564] usb 2-1.1: Product: ZTE WCDMA Technologies MSM [ 197.854572] usb 2-1.1: Manufacturer: ZTE,Incorporated [ 197.854579] usb 2-1.1: SerialNumber: P680A1ZTED010000 [ 197.957739] scsi8 : usb-storage 2-1.1:1.2 [ 198.076554] cdc_ether 2-1.1:1.0 eth1: register 'cdc_ether' at usb-0000:00:1d.0-1.1, CDC Ethernet Device, 00:a0:c6:00:00:00 [ 198.076583] usbcore: registered new interface driver cdc_ether [ 198.955985] scsi 8:0:0:0: CD-ROM CWID USB SCSI CD-ROM 2.31 PQ: 0 ANSI: 2 [ 198.956797] scsi 8:0:0:1: Direct-Access ZTE MMC Storage 2.31 PQ: 0 ANSI: 2 I created the appropriate mobile broadband connection manually, but I cannot enable it in network manager, since the device is not recognized as mobile broadband. Any tips how to make it work?

  Read the article

• Intel Centrino Wireless N 1000 doesn't work on a Lenovo Z560

  - by Timetraveler

  I upgraded my Ubuntu 11.04 to 11.10 and my Wifi has stopped working. I have a Lenovo Z560 that has Intel centrino wireless-N 1000. I have searched various threads having similar problems for a solution and have no success. The wlan0 is not even showing up in rfkill. Please help me find a solution. I am giving below the output of various debug commands. Thanks in advance. DISTRIB_ID=Ubuntu DISTRIB_RELEASE=11.10 DISTRIB_CODENAME=oneiric DISTRIB_DESCRIPTION="Ubuntu 11.10" ----##uname -a Linux gurucharapathy-laptop 3.0.0-17-generic-pae #30-Ubuntu SMP Thu Mar 8 17:53:35 UTC 2012 i686 i686 i386 GNU/Linux ----##lspci -nnk | grep -iA2 net 05:00.0 Network controller [0280]: Intel Corporation Centrino Wireless-N 1000 [8086:0084] Subsystem: Intel Corporation Centrino Wireless-N 1000 BGN [8086:1315] Kernel modules: iwlagn 06:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 02) Subsystem: Lenovo Device [17aa:392e] Kernel driver in use: r8169 ----##iwconfig lo no wireless extensions. eth0 no wireless extensions. ----##iwlist scan lo Interface doesn't support scanning. eth0 Interface doesn't support scanning. ----##rfkill list all 0: hci0: Bluetooth Soft blocked: no Hard blocked: no 1: ideapad_wlan: Wireless LAN Soft blocked: no Hard blocked: no 2: ideapad_bluetooth: Bluetooth Soft blocked: no Hard blocked: no ----##lsmod Module Size Used by rfcomm 38408 8 bnep 17923 2 parport_pc 32114 0 ppdev 12849 0 binfmt_misc 17292 1 snd_hda_codec_hdmi 31426 1 snd_hda_codec_conexant 52460 1 uvcvideo 67271 0 videodev 85626 1 uvcvideo snd_hda_intel 28358 2 snd_hda_codec 91859 3 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel snd_hwdep 13276 1 snd_hda_codec joydev 17393 0 snd_pcm 80435 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13132 0 i915 509554 9 drm_kms_helper 32889 1 i915 snd_rawmidi 25241 1 snd_seq_midi snd_seq_midi_event 14475 1 snd_seq_midi snd_seq 51567 2 snd_seq_midi,snd_seq_midi_event snd_timer 28932 2 snd_pcm,snd_seq drm 196290 5 i915,drm_kms_helper snd_seq_device 14172 3 snd_seq_midi,snd_rawmidi,snd_seq mei 36466 0 mac80211 393421 0 snd 55902 14 snd_hda_codec_hdmi,snd_hda_codec_conexant,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device ideapad_laptop 13575 0 intel_ips 17753 0 btusb 18160 2 i2c_algo_bit 13199 1 i915 soundcore 12600 1 snd bluetooth 148839 23 rfcomm,bnep,btusb cfg80211 172427 1 mac80211 psmouse 63474 0 serio_raw 12990 0 snd_page_alloc 14108 2 snd_hda_intel,snd_pcm sparse_keymap 13658 1 ideapad_laptop wmi 18744 0 video 18908 1 i915 lp 17455 0 parport 40930 3 parport_pc,ppdev,lp ahci 21634 2 libahci 25761 1 ahci r8169 47200 0 ----##nm-tool NetworkManager Tool State: asleep Device: eth0 ----------------------------------------------------------------- Type: Wired Driver: r8169 State: unmanaged Default: no HW Address: 88:AE:1D:DE:5F:9C Capabilities: Carrier Detect: yes Speed: 100 Mb/s Wired Properties Carrier: on ----##lshw -C network *-network UNCLAIMED description: Network controller product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:05:00.0 version: 00 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list configuration: latency=0 resources: memory:d6400000-d6401fff *-network description: Ethernet interface product: RTL8101E/RTL8102E PCI Express Fast Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:06:00.0 logical name: eth0 version: 02 serial: 88:ae:1d:de:5f:9c size: 100Mbit/s capacity: 100Mbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list rom ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=N/A ip=192.168.0.100 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:2000(size=256) memory:d2410000-d2410fff memory:d2400000-d240ffff memory:d2420000-d243ffff

  Read the article

• Correcting color-shifted mirrored i915 driver in 12.04?

  - by Will Martin

  I was called in to fix a friend's malfunctioning HP Pavilion. She's not sure exactly which model, but the sticker on the bottom says "G60". The problem was a failed upgrade to 12.04. I was able to mostly repair it with sudo apt-get -f install, which ran setup and configuration for several hundred packages. The biggest problem at the moment is Xorg. The login screen (lightdm) loads normally but at a reduced resolution (1024x768 instead of 1366x768). But once you log in, it looks like this: Observe that the colors of the dock on the left and the bar at the top are normal. But the background is filled with bizarro color-skewed ghost images of the desktop. In all cases, the actual contents of any programs you run is a totally illegible mess, except that the bar at the top of any program windows looks and acts normally. And the ghost images are interactive! For example, if you click the icon in the top right corner to get the "shut down" menu, the same menu will appear in the ghost images below. Starting a terminal will start a terminal window in both the real desktop and the ghost images, and moving it around updates both the real and ghost desktops. I suspect Xorg is using some kind of wrong driver and/or parameter for the graphics hardware. Here is the graphics-relevant portion of the lspci -v output: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 09) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0 Capabilities: [e0] Vendor Specific Information: Len=0a <?> Kernel driver in use: agpgart-intel 00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) (prog-if 00 [VGA controller]) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0, IRQ 44 Memory at d0000000 (64-bit, non-prefetchable) [size=4M] Memory at c0000000 (64-bit, prefetchable) [size=256M] I/O ports at 5110 [size=8] Expansion ROM at <unassigned> [disabled] Capabilities: [90] MSI: Enable+ Count=1/1 Maskable- 64bit- Capabilities: [d0] Power Management version 3 Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 09) Subsystem: Hewlett-Packard Company Device 360b Flags: bus master, fast devsel, latency 0 Memory at d2500000 (64-bit, non-prefetchable) [size=1M] Capabilities: [d0] Power Management version 3 I'm not sure what to check next. I would ordinarily check xorg.conf to see what it says, but that apparently doesn't exist any more, and my googling has not yielded any useful techniques for getting Xorg to tell me what settings it decided to use. The weird part is that it works fine on the login screen. It's only when you actually log in as a user that the display gets screwed up. Suggestions?

  Read the article

• JavaOne: Parleys.com, Spring Vs. Java EE and HTML5 tooling

  - by delabassee

  Parleys.com, a 2012 Duke's Choice Award winner, is an E-Learning platform that host content from different sources (conferences, JUGs meetings, etc.). There is a lot of technical content available for online but also offline consumption, including many sessions on Java EE. Parleys has just released, for free, all the Devoxx 2011 sessions (video and slides sync'ed!). From a technical point of view, Parleys.com is interesting as they have switched from Spring to Java EE 6 to avoid being locked in a proprietary framework. During the GlassFish Community BoF, Stephan Janssen (Parleys.com and Devoxx founder) also presented how GlassFish is used to support 2000 concurrent Parleys users over a cluster of 2 GlassFish instances. Talking about Java EE and/or Spring, Harshad Oak has posted an update on the 'Spring Vs. Java EE' panel discussion that took place on Tuesday. As Arun said standards such as Java EE does not necessarily refrain innovation: "JBoss Forge & Arquillian from RedHat are great examples of innovation in the JavaEE community. Standardization is important but innovation does continue even within that framework." Simplicity, productivity along with HTML5 are the driving themes of Java EE 7. In terms of simplicity and productivity, the developer experience can also be improved by the tooling. Every NetBeans release comes with a large set of improvements, the just released NetBeans 7.3 beta is no exception. The goal of ‘NB 7.3’s Project Easel’ is to improve HTML5 development, something that will be handy for Java EE 7 developers. Project Easel can, for example, communicate directly to Chrome's WebKit engine, this feature was shown during Sunday's Technical Keynote at the end of the Java EE section. In this beta release, Chrome and the embedded JavaFX browser are the only supported browsers but the NetBeans team plan to add support, over time, for other WebKit based browsers. NetBans 7.3 beta NetBeans 7.3 screenscasts Today (i.e. Wednesday 3rd) is also the final exhibition day, so make sure to visit the Java EE and the GlassFish pods on the Java DEMOgrounds (Hilton Grand Ballroom, 9:30 am - 5:00 pm). Finally, here are some Java EE and GlassFish related activities worth attending today if you are at JavaOne : Wednesday October 3rd Time Title Location 8:30-9:30am What's New in Servlet 3.1: An Overview Parc 55 Mission 8:30-9:30am Bean Validation 1.1: What's New Under the Hood Parc 55Cyril Magnin II/III 10:00-11:00am JSR 353: Java API for JSON Processing Parc 55 Mission 10:00-12:00pm Tutorial : Integrating Your Service into the GlassFish PaaS Platform Parc 55 Devisidero 11:30-12:30pm What's New in JSF: A Complete Tour of JSF 2.2 Parc 55Cyril Magnin I 11:30-12:30pm Best of Both Worlds: Java Persistence with NoSQL and SQL Parc 55 Mission 1:00-2:00pm Sharding Middleware to Achieve Elasticity and High Availability in the Cloud Parc 55Market Street 1:00-2:00pm Pimp My RESTful Java Applications Parc 55Cyril Magnin I 3:00-4:00pm Migrating Spring to Java EE Parc 55Cyril Magnin II/III 4:30-5:30pm JavaEE.Next(): Java EE 7, 8, and Beyond Parc 55Cyril Magnin II/III 4:30-5:30pm HTML5 WebSocket and Java Parc 55Cyril Magnin I 4:30-5:30pm Easy Middleware for Your Embedded Device Nikko Ballroom II/III

  Read the article

• Why wifi doesn't work in this case?

  - by xRobot

  I have a brand new notebook where I have installed Windows 7 and Ubuntu 12.04 LTS 64bit in dual boot. In windows 7 wifi works but in Ubuntu not. Could you help me please ? iwconfig lo no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:off eth0 no wireless extensions. lshw -C network *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:01:00.0 logical name: eth0 version: 07 serial: b4:b5:1f:1b:9a:56 size: 10Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=half firmware=rtl8168e-3_0.0.4 03/27/12 latency=0 link=no multicast=yes port=MII speed=10Mbit/s resources: irq:41 ioport:3000(size=256) memory:c2404000-c2404fff memory:c2400000-c2403fff *-network description: Wireless interface product: Ralink corp. vendor: Ralink corp. physical id: 0 bus info: pci@0000:02:00.0 logical name: wlan0 version: 00 serial: 84:4b:f4:0a:3a:22 width: 32 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=rt2800pci driverversion=3.2.0-31-generic firmware=0.34 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:18 memory:c2500000-c250ffff lspci | grep -i net 01:00.0 Ethernet controller: Realtek Semiconductor Co., Ltd. RTL8111/8168B PCI Express Gigabit Ethernet controller (rev 07) 02:00.0 Network controller: Ralink corp. Device 539a iwlist scan lo Interface doesn't support scanning. wlan0 Interface doesn't support scanning : Device or resource busy eth0 Interface doesn't support scanning. lsmod Module Size Used by rfcomm 47604 0 bnep 18281 2 bluetooth 180104 10 rfcomm,bnep parport_pc 32866 0 ppdev 17113 0 snd_hda_codec_hdmi 32474 1 snd_hda_codec_realtek 224173 1 joydev 17693 0 hp_wmi 18092 0 sparse_keymap 13890 1 hp_wmi snd_hda_intel 33773 3 snd_hda_codec 127706 3 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel snd_hwdep 13668 1 snd_hda_codec snd_pcm 97188 3 snd_hda_codec_hdmi,snd_hda_intel,snd_hda_codec snd_seq_midi 13324 0 snd_rawmidi 30748 1 snd_seq_midi snd_seq_midi_event 14899 1 snd_seq_midi snd_seq 61896 2 snd_seq_midi,snd_seq_midi_event snd_timer 29990 2 snd_pcm,snd_seq snd_seq_device 14540 3 snd_seq_midi,snd_rawmidi,snd_seq psmouse 97362 0 snd 78855 16 snd_hda_codec_hdmi,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_rawmidi,snd_seq,snd_timer,snd_seq_device arc4 12529 2 rt2800pci 18715 0 rt2800lib 58925 1 rt2800pci crc_ccitt 12667 1 rt2800lib rt2x00pci 14577 1 rt2800pci rt2x00lib 51144 3 rt2800pci,rt2800lib,rt2x00pci mac80211 506816 3 rt2800lib,rt2x00pci,rt2x00lib soundcore 15091 1 snd mac_hid 13253 0 uvcvideo 72627 0 videodev 98259 1 uvcvideo v4l2_compat_ioctl32 17128 1 videodev wmi 19256 1 hp_wmi i915 473240 3 cfg80211 205544 2 rt2x00lib,mac80211 eeprom_93cx6 12725 1 rt2800pci drm_kms_helper 46978 1 i915 drm 242038 4 i915,drm_kms_helper i2c_algo_bit 13423 1 i915 snd_page_alloc 18529 2 snd_hda_intel,snd_pcm mei 41616 0 serio_raw 13211 0 video 19596 1 i915 lp 17799 0 parport 46562 3 parport_pc,ppdev,lp usbhid 47199 0 hid 99559 1 usbhid r8169 62099 0 rfkill list: # rfkill list 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no 1: hp-wifi: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Why can't Ubuntu find an ext3 filesystem on my hard-drive?

  - by urig

  This question is related to this question: Not enough components to start the RAID array? I'm trying to retrieve data from a "Western Digital MyBook World Edition (white light)" NAS device. This is basically an embedded Linux box with a 1TB HDD in it formatted in ext3. It stopped booting one day for no apparent reason. I have extracted the HDD from the NAS device and installed it in a desktop machine running Ubuntu 10.10 in the hope of accessing the files on the drive. I have followed instructions in this forum post, intended to mount the drive through Terminal: http://mybookworld.wikidot.com/forum/t-90514/how-to-recover-data-from-wd-my-book-world-edition-nas-device#post-976452 I have identified the partition that I want to mount and recover files from as /dev/sd4 by running "fdisk -l" and getting this: Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes 255 heads, 63 sectors/track, 121601 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0x0001cf00 Device Boot Start End Blocks Id System /dev/sdb1 5 248 1959930 fd Linux raid autodetect /dev/sdb2 249 280 257040 fd Linux raid autodetect /dev/sdb3 281 403 987997+ fd Linux raid autodetect /dev/sdb4 404 121601 973522935 fd Linux raid autodetect// When I try to mount using: "mount -t ext3 /dev/sdb4 /media/xyz" I get the following error: mount: wrong fs type, bad option, bad superblock on /dev/sdb4, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so And "dmesg | tail" shows me: [ 15.184757] [drm] Initialized nouveau 0.0.16 20090420 for 0000:01:00.0 on minor 0 [ 15.986859] [drm] nouveau 0000:01:00.0: Allocating FIFO number 1 [ 15.988379] [drm] nouveau 0000:01:00.0: nouveau_channel_alloc: initialised FIFO 1 [ 16.353379] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 16.705944] tg3 0000:02:00.0: eth0: Link is up at 100 Mbps, full duplex [ 16.705951] tg3 0000:02:00.0: eth0: Flow control is off for TX and off for RX [ 16.706102] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready [ 19.125673] EXT4-fs (sda5): re-mounted. Opts: errors=remount-ro,commit=0 [ 27.600012] eth0: no IPv6 routers present [ 373.478031] EXT3-fs (sdb4): error: can't find ext3 filesystem on dev sdb4. I guess that last line is the punch line :) Why can't it find the ext3 filesystem on my drive? What do I need to do to mount this partition and copy its contents? Does it have anything to do with the drive being part of a RAID Array (see question mentioned above)? Many thanks to any who can help.

  Read the article

• T-SQL: Omit/Ignore repetitive data from a specific column

  - by Dsyfa

  Hi, For my question lets consider the following sample table data: ProductID    ProductName    Price   Category 1                Apple                 5.00       Fruits 2                Apple                 5.00       Food 3                Orange               3.00       Fruits 4                Banana                 2.00       Fruits I need a query which will result in the following data set: ProductID    ProductName    Price   Category 1                Apple                 5.00       Fruits 3                Orange               3.00       Fruits 4                Banana                 2.00       Fruits As you can see ProductID 2 has been omitted/ignored because Apple is already present in the result i.e. each product must appear only once irrespective of Category or Price. Thanks

  Read the article

• php loop xml data with xsd schema - how do get the data

  - by miholzi

  i try to geht the data from a xml file and i have troubles to get data, for example, how can i get the caaml:locRef value or the caaml:beginPosition value? here is the code so far: /* a big thank you to helderdarocha */ /* – he already helped me yesterday with a part of this code */ $doc = new DOMDocument(); $doc->load('xml/test.xml'); $xpath = new DOMXpath($doc); $xpath->registerNamespace("caaml", "http://caaml.org/Schemas/V5.0/Profiles/BulletinEAWS"); if ($doc->schemaValidate('http://caaml.org/Schemas/V5.0/Profiles/BulletinEAWS/CAAMLv5_BulletinEAWS.xsd')) { foreach ($xpath->query('//caaml:DangerRating') as $key) { echo $key->nodeValue; print_r($key); } } and here ist the print_r from $key DOMElement Object ( [tagName] => caaml:DangerRating [schemaTypeInfo] => [nodeName] => caaml:DangerRating [nodeValue] => 2014-03-03+01:00 2 [nodeType] => 1 [parentNode] => (object value omitted) [childNodes] => (object value omitted) [firstChild] => (object value omitted) [lastChild] => (object value omitted) [previousSibling] => (object value omitted) [nextSibling] => (object value omitted) [attributes] => (object value omitted) [ownerDocument] => (object value omitted) [namespaceURI] => http://caaml.org/Schemas/V5.0/Profiles/BulletinEAWS [prefix] => caaml [localName] => DangerRating [baseURI] => /Applications/MAMP/htdocs/lola/xml/test.xml [textContent] => 2014-03-03+01:00 2 ) 2014-03-04+01:00 2 and here a part of the xml <caaml:DangerRating> <caaml:locRef xlink:href="AT7R1"/> <caaml:validTime> <caaml:TimePeriod> <caaml:beginPosition>2014-03-06T00:00:00+01:00</caaml:beginPosition> <caaml:endPosition>2014-03-06T11:59:59+01:00</caaml:endPosition> </caaml:TimePeriod> </caaml:validTime> <caaml:validElevation> <caaml:ElevationRange uom="m"> <caaml:beginPosition>2200</caaml:beginPosition> </caaml:ElevationRange> </caaml:validElevation> <caaml:mainValue>2</caaml:mainValue> </caaml:DangerRating> <caaml:DangerRating> <caaml:locRef xlink:href="AT7R1"/> <caaml:validTime> <caaml:TimePeriod> thanks!

  Read the article

• Make vmware virtual machine from HDD with bad sectros

  - by mike1616

  I have a notebook with a bad HDD (it has bad sectors). I would like make a virtual disk with VMware workstation from this computer. I installed VMware Workstation & VMware vCenter Converter Standalone Client on this notebook, then I used virtualize a physical machine. It started procedure but at 38% I got this error: FAILED: An error occurred during the conversion: 'BlockLevelVolumeCloneMgr::CloneVolume: Detected a write error during the cloning of volume \WindowsBitmapDriverVolumeId=[39-06-3A-06-00-02-13-4C-1D-00-00-00]. Error: 209 (type: 1, code: 13)' I Googled it and I think it means that I have bad sectors on the HDD. How can I solve this problem and make a virtual machine from HDD with bad sectors?

  Read the article

• apache eats up too much ram per child

  - by mrc4r7m4n

  Hello to everyone. I've got fallowing problem: Apache eat to many ram per child. The fallowing comments shows: cat /etc/redhat-release -- Fedora release 8 (Werewolf) free -m: total used free shared buffers cached Mem: 3566 3136 429 0 339 1907 -/+ buffers/cache: 889 2676 Swap: 4322 0 4322 I know that you will say that there is nothing to worry about because swap is not use, but i think it's not use for now. 3.httpd -v: Server version: Apache/2.2.14 (Unix) 4.httpd -l: Compiled in modules: core.c mod_authn_file.c mod_authn_default.c mod_authz_host.c mod_authz_groupfile.c mod_authz_user.c mod_authz_default.c mod_auth_basic.c mod_include.c mod_filter.c mod_log_config.c mod_env.c mod_setenvif.c mod_version.c mod_ssl.c prefork.c http_core.c mod_mime.c mod_status.c mod_autoindex.c mod_asis.c mod_cgi.c mod_negotiation.c mod_dir.c mod_actions.c mod_userdir.c mod_alias.c mod_rewrite.c mod_so.c 5.List of loaded dynamic modules: LoadModule authz_host_module modules/mod_authz_host.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule alias_module modules/mod_alias.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule cgi_module modules/mod_cgi.so 6.My prefrok directive <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On 7.top -u apache: ctrl+ M top - 09:19:42 up 2 days, 19 min, 2 users, load average: 0.85, 0.87, 0.80 Tasks: 113 total, 1 running, 112 sleeping, 0 stopped, 0 zombie Cpu(s): 7.3%us, 15.7%sy, 0.0%ni, 75.7%id, 0.0%wa, 0.7%hi, 0.7%si, 0.0%st Mem: 3652120k total, 3149964k used, 502156k free, 348048k buffers Swap: 4425896k total, 0k used, 4425896k free, 1944952k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16956 apache 20 0 700m 135m 100m S 0.0 3.8 2:16.78 httpd 16953 apache 20 0 565m 130m 96m S 0.0 3.7 1:57.26 httpd 16957 apache 20 0 587m 129m 102m S 0.0 3.6 1:47.41 httpd 16955 apache 20 0 567m 126m 93m S 0.0 3.6 1:43.60 httpd 17494 apache 20 0 626m 125m 96m S 0.0 3.5 1:58.77 httpd 17515 apache 20 0 540m 120m 88m S 0.0 3.4 1:45.57 httpd 17516 apache 20 0 573m 120m 88m S 0.0 3.4 1:50.51 httpd 16954 apache 20 0 551m 120m 88m S 0.0 3.4 1:52.47 httpd 17493 apache 20 0 586m 120m 94m S 0.0 3.4 1:51.02 httpd 17279 apache 20 0 568m 117m 87m S 16.0 3.3 1:51.87 httpd 17302 apache 20 0 560m 116m 90m S 0.3 3.3 1:59.06 httpd 17495 apache 20 0 551m 116m 89m S 0.0 3.3 1:47.51 httpd 17277 apache 20 0 476m 114m 81m S 0.0 3.2 1:37.14 httpd 30097 apache 20 0 536m 113m 83m S 0.0 3.2 1:47.38 httpd 30112 apache 20 0 530m 112m 81m S 0.0 3.2 1:40.15 httpd 17513 apache 20 0 516m 112m 85m S 0.0 3.1 1:43.92 httpd 16958 apache 20 0 554m 111m 82m S 0.0 3.1 1:44.18 httpd 1617 apache 20 0 487m 111m 85m S 0.0 3.1 1:31.67 httpd 16952 apache 20 0 461m 107m 75m S 0.0 3.0 1:13.71 httpd 16951 apache 20 0 462m 103m 76m S 0.0 2.9 1:28.05 httpd 17278 apache 20 0 497m 103m 76m S 0.0 2.9 1:31.25 httpd 17403 apache 20 0 537m 102m 79m S 0.0 2.9 1:52.24 httpd 25081 apache 20 0 412m 101m 70m S 0.0 2.8 1:01.74 httpd I guess thats all information needed to help me solve this problem. I think the virt memory is to big, the same res. The consumption of ram is increasing all the time. Maybe it's memory leak because i see there is so many static modules compiled. Could someone help me with this issue? Thank you in advance. 8.ldd /usr/sbin/httpd linux-gate.so.1 => (0x0012d000) libm.so.6 => /lib/libm.so.6 (0x0012e000) libpcre.so.0 => /lib/libpcre.so.0 (0x00157000) libselinux.so.1 => /lib/libselinux.so.1 (0x0017f000) libaprutil-1.so.0 => /usr/lib/libaprutil-1.so.0 (0x0019a000) libcrypt.so.1 => /lib/libcrypt.so.1 (0x001b4000) libldap-2.3.so.0 => /usr/lib/libldap-2.3.so.0 (0x001e6000) liblber-2.3.so.0 => /usr/lib/liblber-2.3.so.0 (0x00220000) libdb-4.6.so => /lib/libdb-4.6.so (0x0022e000) libexpat.so.1 => /lib/libexpat.so.1 (0x00370000) libapr-1.so.0 => /usr/lib/libapr-1.so.0 (0x00391000) libpthread.so.0 => /lib/libpthread.so.0 (0x003b9000) libdl.so.2 => /lib/libdl.so.2 (0x003d2000) libc.so.6 => /lib/libc.so.6 (0x003d7000) /lib/ld-linux.so.2 (0x00110000) libuuid.so.1 => /lib/libuuid.so.1 (0x00530000) libresolv.so.2 => /lib/libresolv.so.2 (0x00534000) libsasl2.so.2 => /usr/lib/libsasl2.so.2 (0x00548000) libssl.so.6 => /lib/libssl.so.6 (0x00561000) libcrypto.so.6 => /lib/libcrypto.so.6 (0x005a6000) libgssapi_krb5.so.2 => /usr/lib/libgssapi_krb5.so.2 (0x006d9000) libkrb5.so.3 => /usr/lib/libkrb5.so.3 (0x00707000) libcom_err.so.2 => /lib/libcom_err.so.2 (0x0079a000) libk5crypto.so.3 => /usr/lib/libk5crypto.so.3 (0x0079d000) libz.so.1 => /lib/libz.so.1 (0x007c3000) libkrb5support.so.0 => /usr/lib/libkrb5support.so.0 (0x007d6000) libkeyutils.so.1 => /lib/libkeyutils.so.1 (0x007df000) Currently i cant restart the apache. I work in a company and now there is rush hours. I will do that about 5 pm. Current top -u apache: shift + M top - 12:31:33 up 2 days, 3:30, 1 user, load average: 0.73, 0.80, 0.79 Tasks: 114 total, 1 running, 113 sleeping, 0 stopped, 0 zombie Cpu(s): 3.3%us, 4.7%sy, 0.0%ni, 90.0%id, 1.3%wa, 0.3%hi, 0.3%si, 0.0%st Mem: 3652120k total, 3169720k used, 482400k free, 353372k buffers Swap: 4425896k total, 0k used, 4425896k free, 1978688k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 16957 apache 20 0 708m 145m 117m S 0.0 4.1 2:11.32 httpd 16956 apache 20 0 754m 142m 107m S 0.0 4.0 2:33.94 httpd 16955 apache 20 0 641m 136m 103m S 5.3 3.8 1:58.37 httpd 17515 apache 20 0 624m 131m 99m S 0.0 3.7 2:03.90 httpd 16954 apache 20 0 627m 130m 98m S 0.0 3.6 2:13.87 httpd 17302 apache 20 0 625m 124m 97m S 0.0 3.5 2:10.80 httpd 17403 apache 20 0 624m 114m 91m S 0.0 3.2 2:08.85 httpd 16952 apache 20 0 502m 114m 81m S 0.0 3.2 1:23.78 httpd 16186 apache 20 0 138m 61m 35m S 0.0 1.7 0:15.54 httpd 16169 apache 20 0 111m 49m 17m S 0.0 1.4 0:06.00 httpd 16190 apache 20 0 126m 48m 24m S 0.0 1.4 0:11.44 httpd 16191 apache 20 0 109m 48m 19m S 0.0 1.4 0:04.62 httpd 16163 apache 20 0 114m 48m 21m S 0.0 1.4 0:09.60 httpd 16183 apache 20 0 127m 48m 23m S 0.0 1.3 0:11.23 httpd 16189 apache 20 0 109m 47m 17m S 0.0 1.3 0:04.55 httpd 16201 apache 20 0 106m 47m 17m S 0.0 1.3 0:03.90 httpd 16193 apache 20 0 103m 46m 20m S 0.0 1.3 0:10.76 httpd 16188 apache 20 0 107m 45m 18m S 0.0 1.3 0:04.85 httpd 16168 apache 20 0 103m 44m 17m S 0.0 1.2 0:05.61 httpd 16187 apache 20 0 118m 41m 21m S 0.0 1.2 0:08.50 httpd 16184 apache 20 0 111m 41m 19m S 0.0 1.2 0:09.28 httpd 16206 apache 20 0 110m 41m 20m S 0.0 1.2 0:11.69 httpd 16199 apache 20 0 108m 40m 17m S 0.0 1.1 0:07.76 httpd 16166 apache 20 0 104m 37m 18m S 0.0 1.0 0:04.31 httpd 16185 apache 20 0 99.3m 36m 16m S 0.0 1.0 0:04.16 httpd as you can see the memory usage growing up from e.g. res( 135 to 145)m and it will be growing up till memory ends. Are you sure that this option i set up: <IfModule prefork.c> StartServers 8 MinSpareServers 5 MaxSpareServers 25 ServerLimit 80 MaxClients 80 MaxRequestsPerChild 4000 </IfModule> KeepAliveTimeout 6 MaxKeepAliveRequests 100 KeepAlive On are correct? Maybe i should decrease some of them? Another questions that bother me: I got e.g. static module mod_negotiation.c compiled into apache and the same module loaded as dynamic. Is this normal that i've loaded duplicated module. But when i want to remove dynamic module(mod_negotiation.c) from httpd.conf and then restart apache error appears. Now I cant tell this error message because i cant restart apache :( Hello again:) This is memory usage just after restart apache: top - 16:19:12 up 2 days, 7:18, 3 users, load average: 1.08, 0.91, 0.91 Tasks: 109 total, 2 running, 107 sleeping, 0 stopped, 0 zombie Cpu(s): 17.0%us, 25.7%sy, 51.0%ni, 4.7%id, 0.0%wa, 0.3%hi, 1.3%si, 0.0%st Mem: 3652120k total, 2762516k used, 889604k free, 361552k buffers Swap: 4425896k total, 0k used, 4425896k free, 2020980k cached PID USER PR NI VIRT RES SHR S %CPU %MEM TIME+ COMMAND 13569 apache 20 0 93416 43m 15m S 0.0 1.2 0:02.55 httpd 13575 apache 20 0 98356 38m 16m S 32.3 1.1 0:02.55 httpd 13571 apache 20 0 86808 33m 12m S 0.0 0.9 0:02.60 httpd 13568 apache 20 0 86760 33m 12m S 0.0 0.9 0:00.81 httpd 13570 apache 20 0 83480 33m 12m S 0.0 0.9 0:00.51 httpd 13572 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13573 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13574 apache 20 0 63520 5916 1548 S 0.0 0.2 0:00.02 httpd 13761 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13762 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.01 httpd 13763 apache 20 0 63388 5128 860 S 0.0 0.1 0:00.00 httpd I will try to compile apache from source to newest version. Thx for help guys.

  Read the article

• Why am I getting Network error: 403 Forbidden in firebug for files I am not trying to access?

  - by moomoochoo

  QUESTIONs I'd like to know why I am getting Network error: 403 Forbidden in firebug for files that I am not trying to access? is it likely to cause any serious problems on the webserver? how to fix it. Why is my browser trying to access those files in the error message? DETAILS I’m using wampserver 2.2 to access a folder via the browser. The browser is on the same computer as the server. The computer is running windows 7 ultimate. When I view a web folder via my browser hXXp://localhost/folder I can see the folder contents ok but in firebug I get Network error: 403 Forbidden I’m not deliberately trying to access those files in the error msgs. You will notice they are in a completely different folder to the one I am looking at. I check the apache_error.log and see [Wed Sep 26 00:05:10 2012] [error] [client 127.0.0.1] client denied by server configuration: C:/apache2, referer: hxxp://localhost/folder/ Wampserver 2.2 is installed on D drive. I took a look at the httpd.conf file but I couldn't find any references to c: When I look in Apache’s access.log I see 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/blank.gif HTTP/1.1" 403 217 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/back.gif HTTP/1.1" 403 216 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/text.gif HTTP/1.1" 403 216 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/unknown.gif HTTP/1.1" 403 219 127.0.0.1 - - [26/Sep/2012:00:05:10 +0900] "GET /icons/folder.gif HTTP/1.1" 403 218 CONFIGURATION Wampserver 2.2 installed on Drive D Apache 2.2.22 PHP 5.4.3 MySQL 5.5.24 Firebug 1.10.3 Firefox 15.0.1

  Read the article

• Several IPs for my VPS

  - by Serafim

  I bought vps on santrex.net but can't receive any reply from support. My Problem: I have 5 ip but it pings only 1!!! I can't setup DNS because I need 2 ip minimum . Could you help me to activate other my IPs? root@spnova:~# ifconfig eth0 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.100 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:163342 errors:0 dropped:0 overruns:0 frame:0 TX packets:13585 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:32862185 (32.8 MB) TX bytes:15189036 (15.1 MB) eth0:0 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.101 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:1 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.102 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:2 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.103 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 eth0:3 Link encap:Ethernet HWaddr aa:00:b9:4f:19:01 inet addr:188.72.240.104 Bcast:188.72.240.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:11885 errors:0 dropped:0 overruns:0 frame:0 TX packets:11885 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:8124693 (8.1 MB) TX bytes:8124693 (8.1 MB) root@spnova:~# nano /etc/network/interfaces # Auto generated eth0 interfaces auto eth0 lo iface eth0 inet static address 188.72.240.100 netmask 255.255.255.0 up route add -net 188.72.225.0 netmask 255.255.255.0 dev eth0 up route add default gw 188.72.225.1 iface lo inet loopback auto eth0:0 iface eth0:0 inet static address 188.72.240.101 netmask 255.255.255.0 auto eth0:1 iface eth0:1 inet static address 188.72.240.102 netmask 255.255.255.0 auto eth0:2 iface eth0:2 inet static address 188.72.240.103 netmask 255.255.255.0 auto eth0:3 iface eth0:3 inet static address 188.72.240.104 netmask 255.255.255.0

  Read the article

• Pulseaudio is no longer working in Debian Squeeze: 'Failed to open module "module-combine-sink": file not found'

  - by mattalexx

  I'm having a problem with pulseaudio. My machine crashed, and when I rebooted and ran pavucontrol, I got a "Connection Failed: Connection refused" dialog. When I run pulseaudio --log-level=info --log-target=stderr from the command line, I get the following output: [...] I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:1: Invalid argument I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:1 I: alsa-util.c: Error opening PCM device a52:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=1,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:1 I: alsa-util.c: Error opening PCM device hdmi:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device front:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device hw:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC1D0c' failed (-2) I: alsa-util.c: Error opening PCM device iec958:1: No such file or directory I: card.c: Created 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: alsa-sink.c: Successfully opened device front:1. I: alsa-sink.c: Selected mapping 'Analog Stereo' (analog-stereo). I: alsa-sink.c: Successfully enabled mmap() mode. I: alsa-sink.c: Successfully enabled timer-based scheduling mode. I: (alsa-lib)control.c: Invalid CTL front:1 I: alsa-mixer.c: Unable to attach to mixer front:1: No such file or directory I: alsa-mixer.c: Successfully attached to mixer 'hw:1' W: alsa-mixer.c: Your kernel driver is broken: it reports a volume range from 0.00 dB to 0.00 dB which makes no sense. I: module-device-restore.c: Restoring volume for sink alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo. I: sink.c: Created sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: sink.c: alsa.resolution_bits = "16" I: sink.c: device.api = "alsa" I: sink.c: device.class = "sound" I: sink.c: alsa.class = "generic" I: sink.c: alsa.subclass = "generic-mix" I: sink.c: alsa.name = "USB Audio" I: sink.c: alsa.id = "USB Audio" I: sink.c: alsa.subdevice = "0" I: sink.c: alsa.subdevice_name = "subdevice #0" I: sink.c: alsa.device = "0" I: sink.c: alsa.card = "1" I: sink.c: alsa.card_name = "DigiHug USB Audio" I: sink.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: sink.c: alsa.driver_name = "snd_usb_audio" I: sink.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: sink.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: sink.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: sink.c: device.bus = "usb" I: sink.c: device.vendor.id = "1852" I: sink.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: sink.c: device.product.id = "7022" I: sink.c: device.product.name = "DigiHug_USB_Audio" I: sink.c: device.serial = "FiiO_DigiHug_USB_Audio" I: sink.c: device.string = "front:1" I: sink.c: device.buffering.buffer_size = "352800" I: sink.c: device.buffering.fragment_size = "176400" I: sink.c: device.access_mode = "mmap+timer" I: sink.c: device.profile.name = "analog-stereo" I: sink.c: device.profile.description = "Analog Stereo" I: sink.c: device.description = "DigiHug_USB_Audio Analog Stereo" I: sink.c: alsa.mixer_name = "USB Mixer" I: sink.c: alsa.components = "USB1852:7022" I: sink.c: module-udev-detect.discovered = "1" I: sink.c: device.icon_name = "audio-card-usb" I: source.c: Created source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" with sample spec s16le 2ch 44100Hz and channel map front-left,front-right I: source.c: device.description = "Monitor of DigiHug_USB_Audio Analog Stereo" I: source.c: device.class = "monitor" I: source.c: alsa.card = "1" I: source.c: alsa.card_name = "DigiHug USB Audio" I: source.c: alsa.long_card_name = "FiiO DigiHug USB Audio at usb-0000:00:1a.0-1.2, full speed" I: source.c: alsa.driver_name = "snd_usb_audio" I: source.c: device.bus_path = "pci-0000:00:1a.0-usb-0:1.2:1.1" I: source.c: sysfs.path = "/devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1" I: source.c: udev.id = "usb-FiiO_DigiHug_USB_Audio-01-Audio" I: source.c: device.bus = "usb" I: source.c: device.vendor.id = "1852" I: source.c: device.vendor.name = "GYROCOM C&C Co., LTD" I: source.c: device.product.id = "7022" I: source.c: device.product.name = "DigiHug_USB_Audio" I: source.c: device.serial = "FiiO_DigiHug_USB_Audio" I: source.c: device.string = "1" I: source.c: module-udev-detect.discovered = "1" I: source.c: device.icon_name = "audio-card-usb" I: alsa-sink.c: Using 2.0 fragments of size 176400 bytes (1000.00ms), buffer size is 352800 bytes (2000.00ms) I: alsa-sink.c: Time scheduling watermark is 20.00ms I: alsa-sink.c: Hardware volume ranges from 0 to 110. I: alsa-sink.c: Using hardware volume control. Hardware dB scale not supported. I: alsa-sink.c: Using hardware mute control. I: core-util.c: Successfully enabled SCHED_RR scheduling for thread, with priority 5. I: alsa-sink.c: Starting playback. I: module.c: Loaded "module-alsa-card" (index: #4; argument: "device_id="1" name="usb-FiiO_DigiHug_USB_Audio-01-Audio" card_name="alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.2/1-1.2:1.1/sound/card1 (alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio) module loaded. I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device front:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device hw:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround40:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround41:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround50:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround51:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device surround71:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm_hw.c: open '/dev/snd/pcmC2D0p' failed (-2) I: alsa-util.c: Error opening PCM device iec958:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM a52:2 I: alsa-util.c: Error opening PCM device a52:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: (alsa-lib)confmisc.c: Unable to find definition 'cards.USB-Audio.pcm.hdmi.0:CARD=2,AES0=4,AES1=130,AES2=0,AES3=2' I: (alsa-lib)conf.c: function snd_func_refer returned error: No such file or directory I: (alsa-lib)conf.c: Evaluate error: No such file or directory I: (alsa-lib)pcm.c: Unknown PCM hdmi:2 I: alsa-util.c: Error opening PCM device hdmi:2: No such file or directory I: alsa-util.c: Device hw:2 doesn't support 44100 Hz, changed to 8000 Hz. I: alsa-util.c: Failed to set hardware parameters on plug:front:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:hw:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: alsa-util.c: Failed to set hardware parameters on plug:iec958:2: Invalid argument I: module-card-restore.c: Restoring profile for card alsa_card.usb-046d_08d7-01-U0x46d0x8d7. I: card.c: Created 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Loaded "module-alsa-card" (index: #5; argument: "device_id="2" name="usb-046d_08d7-01-U0x46d0x8d7" card_name="alsa_card.usb-046d_08d7-01-U0x46d0x8d7" tsched=yes ignore_dB=no card_properties="module-udev-detect.discovered=1""). I: module-udev-detect.c: Card /devices/pci0000:00/0000:00:1a.0/usb1/1-1/1-1.6/1-1.6:1.1/sound/card2 (alsa_card.usb-046d_08d7-01-U0x46d0x8d7) module loaded. I: module-udev-detect.c: Found 3 cards. I: module.c: Loaded "module-udev-detect" (index: #6; argument: ""). I: module.c: Loaded "module-esound-protocol-unix" (index: #7; argument: ""). I: module.c: Loaded "module-native-protocol-unix" (index: #8; argument: ""). I: module-default-device-restore.c: Saved default sink 'alsa_output.pci-0000_00_1b.0.analog-surround-41' not existant, not restoring default sink setting. I: module-default-device-restore.c: Saved default source 'alsa_output.pci-0000_00_1b.0.analog-surround-41.monitor' not existant, not restoring default source setting. I: module.c: Loaded "module-default-device-restore" (index: #9; argument: ""). I: module.c: Loaded "module-rescue-streams" (index: #10; argument: ""). I: module.c: Loaded "module-always-sink" (index: #11; argument: ""). I: module.c: Loaded "module-intended-roles" (index: #12; argument: ""). I: module.c: Loaded "module-suspend-on-idle" (index: #13; argument: ""). I: client.c: Created 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Loaded "module-console-kit" (index: #14; argument: ""). I: module.c: Loaded "module-position-event-sounds" (index: #15; argument: ""). I: module.c: Loaded "module-cork-music-on-phone" (index: #16; argument: ""). E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I: module.c: Unloading "module-device-restore" (index: #0). I: module.c: Unloaded "module-device-restore" (index: #0). I: module.c: Unloading "module-stream-restore" (index: #1). I: module.c: Unloaded "module-stream-restore" (index: #1). I: module.c: Unloading "module-card-restore" (index: #2). I: module.c: Unloaded "module-card-restore" (index: #2). I: module.c: Unloading "module-augment-properties" (index: #3). I: module.c: Unloaded "module-augment-properties" (index: #3). I: module.c: Unloading "module-alsa-card" (index: #4). I: sink.c: Freeing sink 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo" I: source.c: Freeing source 0 "alsa_output.usb-FiiO_DigiHug_USB_Audio-01-Audio.analog-stereo.monitor" I: card.c: Freed 0 "alsa_card.usb-FiiO_DigiHug_USB_Audio-01-Audio" I: module.c: Unloaded "module-alsa-card" (index: #4). I: module.c: Unloading "module-alsa-card" (index: #5). I: card.c: Freed 1 "alsa_card.usb-046d_08d7-01-U0x46d0x8d7" I: module.c: Unloaded "module-alsa-card" (index: #5). I: module.c: Unloading "module-udev-detect" (index: #6). I: module.c: Unloaded "module-udev-detect" (index: #6). I: module.c: Unloading "module-esound-protocol-unix" (index: #7). I: module.c: Unloaded "module-esound-protocol-unix" (index: #7). I: module.c: Unloading "module-native-protocol-unix" (index: #8). I: module.c: Unloaded "module-native-protocol-unix" (index: #8). I: module.c: Unloading "module-default-device-restore" (index: #9). I: module.c: Unloaded "module-default-device-restore" (index: #9). I: module.c: Unloading "module-rescue-streams" (index: #10). I: module.c: Unloaded "module-rescue-streams" (index: #10). I: module.c: Unloading "module-always-sink" (index: #11). I: module.c: Unloaded "module-always-sink" (index: #11). I: module.c: Unloading "module-intended-roles" (index: #12). I: module.c: Unloaded "module-intended-roles" (index: #12). I: module.c: Unloading "module-suspend-on-idle" (index: #13). I: module.c: Unloaded "module-suspend-on-idle" (index: #13). I: module.c: Unloading "module-console-kit" (index: #14). I: client.c: Freed 0 "ConsoleKit Session /org/freedesktop/ConsoleKit/Session2" I: module.c: Unloaded "module-console-kit" (index: #14). I: module.c: Unloading "module-position-event-sounds" (index: #15). I: module.c: Unloaded "module-position-event-sounds" (index: #15). I: module.c: Unloading "module-cork-music-on-phone" (index: #16). I: module.c: Unloaded "module-cork-music-on-phone" (index: #16). I: main.c: Daemon terminated. I believe the relevant part is this: E: module.c: Failed to open module "module-combine-sink": file not found E: main.c: Module load failed. E: main.c: Failed to initialize daemon. I tried uninstalling and reinstalling pulseaudio, I tried to find a way to install module-combine-sink. Nothing worked. I'm on a Debian Squeeze 32-bit machine. What can I do to fix this?

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• Force netsh/arp binding multicast IP addres with specific MAC address

  - by Olivier

  I would like to setup an binding from an IP address to a MAC address using netsh. Goal is to bond an IP address which is a multicast address (224.224.x.y) to a given MAC address (which is NOT the calculated one from the multicast IP address : 01:00:5e:X:Y:Z It used to work with Windows XP (was it a bug that used to be "perfect" for my needs?), but Windows 7/8/8.1 forces the MAC address to the calculated one instead of letting me put what I want! (http://nettools.aqwnet.com/ipmaccalc/ipmaccalc.php shows MAC address calculation for multicast IP address) Thus I'm doing the following. Listing existing mappings: netsh.exe interface ip show neighbors "Ethernet" Interface 12 : Ethernet Internet address Physical address Type 224.0.0.22 01-00-5e-XX-YY-ZZ static Then adding my interface mapping manually: netsh.exe interface ip add neighbors "Ethernet" "224.xxx.yyy.zzz" "00-80-EE-UU-VV-WW" Finally, listing again my mappings: netsh.exe interface ip show neighbors "Ethernet" Interface 12 : Ethernet Internet address Physical address Type 224.0.0.22 01-00-5e-XX-YY-ZZ static **224.xxx.yyy.zzz 01-00-5e-UU-VV-WW static** As you can see, the MAC Address of the second entry (the one I just made) has been dynamically replaced by the calculated MAC Address corresponding to my IP Address... Calculation is done as follow (and displayed in hexa): UU=(xxx-128) VV=yyy WW=zzz But I don't want that behavior. My IP address and MAC address cannot be changed, and I must associate them accurately. Does anybody know how to disable MAC address substitution/calculation in netsh? Thanks, Olivier.

  Read the article

• HP Storageworks 448 tape drive input/output error with Ubuntu

  - by Dan D

  I'm trying to set a backup to tape of a machine using flexbackup. However any attempt to write to the tape drive (via either flexbackup or just tar) results in "/dev/st0: Input/output error" The machine seems to recognise the drive (HP Storageworks Ultrium 448) and that there's a tape in it and "mt status" seems to work... "mt -f /dev/st0 rewind" or "erase" throw no errors... root@stor001:/# mt status SCSI 2 tape drive: File number=0, block number=0, partition=0. Tape block size 0 bytes. Density code 0x42 (LTO-2). Soft error count since last status=0 General status bits on (41010000): BOT ONLINE IM_REP_EN root@stor001:/# cat /proc/scsi/scsi Attached devices: Host: scsi0 Channel: 00 Id: 00 Lun: 00 Vendor: HL-DT-ST Model: DVDRAM GSA-4084N Rev: KS02 Type: CD-ROM ANSI SCSI revision: 05 Host: scsi2 Channel: 00 Id: 03 Lun: 00 Vendor: HP Model: Ultrium 2-SCSI Rev: S65D Type: Sequential-Access ANSI SCSI revision: 03 "tell" does however root@stor001:/# mt -f /dev/st0 tell /dev/st0: Input/output error Based on a forum post I found, I tried: root@stor001:/# dd if=/dev/zero of=/dev/nst0 bs=1024 count=10 10+0 records in 10+0 records out 10240 bytes (10 kB) copied, 5.0815 s, 2.0 kB/s which gave the person on the forum an error but seems to work for me. If anyone has any suggestions, I'm all ears...

  Read the article

• Network traffic is not being forwarded from a VM to the network using a bridged interface with Xen + libvirt

  - by foob

  I'm having trouble getting network access from a VM that I'm running using Xen and libvirt. I've been trying different things and reading similar posts online for a couple of days but I'm really stuck at this point. If anybody could offer some insight it would be much appreciated. I have a VM that I'm running on a host with a bridge set up as br0 and an interface eth0 on a 192.168.60.0/24 subnet. The networking portion of the libvirt configuration xml is: <interface type='bridge'> <mac address='ff:a0:d1:e5:07:de'/> <source bridge='br0'/> <script path='/etc/xen/scripts/vif-bridge'/> <model type='virtio' /> </interface> When I start the VM a vif6.0 interface is created on the host and the ifconfig output is: br0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet addr:192.168.60.33 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:13 errors:0 dropped:0 overruns:0 frame:0 TX packets:40 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:3570 (3.4 KiB) TX bytes:3508 (3.4 KiB) eth0 Link encap:Ethernet HWaddr 00:A0:D1:C3:07:DE inet6 addr: fe80::2a0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 b) TX bytes:492 (492.0 b) Interrupt:19 Memory:fe8f0000-fe900000 vif6.0 Link encap:Ethernet HWaddr FE:FF:FF:FF:FF:FF inet6 addr: fe80::fcff:ffff:feff:ffff/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:80 errors:0 dropped:0 overruns:0 frame:0 TX packets:6 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:500 RX bytes:6660 (6.5 KiB) TX bytes:468 (468.0 b) virbr0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.122.1 Bcast:192.168.122.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:0 (0.0 b) TX bytes:0 (0.0 b) The 'brctl show' output seems to show the bridge being configured correctly: br0 8000.00a0d1e507de no eth0 vif6.0 The ifcfg-eth0 contents in the VM are: DEVICE=eth0 BOOTPROTO=static HWADDR=FF:A0:D1:E5:07:DE IPADDR=192.168.60.133 NETMASK=255.255.255.0 ONBOOT=yes and the output of ifconfig in the VM look like what I would expect: eth0 Link encap:Ethernet HWaddr FF:A0:D1:E5:07:DE inet addr:192.168.60.133 Bcast:192.168.60.255 Mask:255.255.255.0 inet6 addr: fe80::fda0:d1ff:fee5:7de/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:6 errors:0 dropped:0 overruns:0 frame:0 TX packets:80 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:468 (468.0 b) TX bytes:7780 (7.5 KiB) but when I try to ssh or ping another computer I get 'no route to host.' Using tcpdump on the host system I tried to see if I could narrow down where the problem is: # tcpdump -vv -i vif6.0 tcpdump: WARNING: vif6.0: no IPv4 address assigned tcpdump: listening on vif6.0, link-type EN10MB (Ethernet), capture size 96 bytes 14:49:40.833997 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:41.833314 arp who-has 192.168.60.35 tell 192.168.60.133 14:49:42.833309 arp who-has 192.168.60.35 tell 192.168.60.133 So the VM is sending out out an arp who-has packet when I try to ssh to 192.168.60.35. I think that this means the setup within the VM is ok and that this is an issue on the host system. If I run tcpdump with the interface of br0 then I don't see these arp packets. My thought here is that the packets are being blocked before going on to the bridge somehow. I tried adding an iptables rule to resolve this: -A FORWARD -m physdev --physdev-is-bridged -j ACCEPT but it didn't work. I also tried the following: /sbin/sysctl -w net.bridge.bridge-nf-call-ip6tables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-iptables=0 /sbin/sysctl -w net.bridge.bridge-nf-call-arptables=0 /sbin/sysctl -w net.ipv4.ip_forward=1 which had no impact. Is it obvious to somebody who has more experience than me what I'm missing here? Should vif6.0 have the same MAC address is eth0 in the vm? Do I need more rules in my iptables? Thanks for any help!

  Read the article

• routing specific IP to ppp0 tunnel

  - by gompertz

  Hi All, I feel I've struggled with this long enough and need some help. I have a pptp tunnel and am trying to route destination traffic from 208.85.40.20 to the pptp tunnel (ppp0). (Keen observers may recognize the ip as being that of pandora.com). I am doing all this configuration on a router... and I know it's not working successfully as traceroute yields nothing but astericks. I've pasted relevant outputs below: (with some "security" editing to the addresses) root@OpenWrt:~# ifconfig br0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:192.168.1.1 Bcast:192.168.1.255 Mask:255.255.255.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:28185 errors:0 dropped:0 overruns:0 frame:0 TX packets:24936 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:4894242 (4.6 MiB) TX bytes:5941902 (5.6 MiB) eth0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING PROMISC MULTICAST MTU:1500 Metric:1 RX packets:51829 errors:0 dropped:0 overruns:0 frame:0 TX packets:56824 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:11490288 (10.9 MiB) TX bytes:11857913 (11.3 MiB) Interrupt:4 eth2 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:4 errors:0 dropped:0 overruns:0 frame:15426 TX packets:9529 errors:21 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:423 (423.0 B) TX bytes:596036 (582.0 KiB) Interrupt:2 Base address:0x2000 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:30 errors:0 dropped:0 overruns:0 frame:0 TX packets:30 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:2300 (2.2 KiB) TX bytes:2300 (2.2 KiB) ppp0 Link encap:Point-Point Protocol inet addr:68.68.39.250 P-t-P:172.16.20.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1400 Metric:1 RX packets:165 errors:2 dropped:0 overruns:0 frame:0 TX packets:68 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:3 RX bytes:7006 (6.8 KiB) TX bytes:3462 (3.3 KiB) vlan0 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING ALLMULTI MULTICAST MTU:1500 Metric:1 RX packets:28182 errors:0 dropped:0 overruns:0 frame:0 TX packets:33813 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5006544 (4.7 MiB) TX bytes:6609774 (6.3 MiB) vlan1 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX inet addr:173.183.111.3 Bcast:173.183.111.255 Mask:255.255.224.0 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:23653 errors:0 dropped:0 overruns:0 frame:0 TX packets:23012 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:5522012 (5.2 MiB) TX bytes:4982944 (4.7 MiB) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) wds0.4915 Link encap:Ethernet HWaddr 00:1A:92:BC:XX:XX UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:0 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:0 (0.0 B) root@OpenWrt:~# cat /etc/ppp/ip-up iptables -A FORWARD -t filter -i br0 -m state --state NEW,ESTABLISHED,RELATED -j ACCEPT iptables -A FORWARD -t filter -i ppp0 -m state --state ESTABLISHED,RELATED -j ACCEPT iptables -t nat -A POSTROUTING -o ppp0 -s 192.168.1.1/24 -d 0/0 -j MASQUERADE iptables -A forwarding_rule -o ppp0 -j ACCEPT iptables -A forwarding_rule -i ppp0 -j ACCEPT iptables -t nat -A postrouting_rule -o ppp0 -j MASQUERADE root@OpenWrt:~# route Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 172.16.20.1 * 255.255.255.255 UH 0 0 0 ppp0 208.85.40.20 * 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 * 255.255.255.0 U 0 0 0 br0 173.183.192.0 * 255.255.224.0 U 0 0 0 vlan1 default d173-183-192-1. 0.0.0.0 UG 0 0 0 vlan1 default 192.168.1.1 0.0.0.0 UG 0 0 0 br0 Any advice is greatly appreciated, I'm not too great with network but am pretty astute at learning ;-)

  Read the article

• Unable to get ls to recognise LS_OPTIONS or LS_COLORS?

  - by A T

  Trying to get --color=auto as the default ls argument. $ ls --version ls (GNU coreutils) 8.21 … $ echo $LS_COLORS no=00:fi=00:di=00;34:ln=01;36:pi=40;33:so=01;35:do=01;35:bd=40;33;01:cd=40;33;01:or=40;31;01:ex=00;32:*.tar=01;31:*.tgz=01;31:*.arj=01;31:*.taz=01;31:*.lzh=01;31:*.zip=01;31:*.z=01;31:*.Z=01;31:*.gz=01;31:*.bz2=01;31:*.deb=01;31:*.rpm=01;31:*.jar=01;31:*.jpg=01;35:*.jpeg=01;35:*.gif=01;35:*.bmp=01;35:*.pbm=01;35:*.pgm=01;35:*.ppm=01;35:*.tga=01;35:*.xbm=01;35:*.xpm=01;35:*.tif=01;35:*.tiff=01;35:*.png=01;35:*.mov=01;35:*.mpg=01;35:*.mpeg=01;35:*.avi=01;35:*.fli=01;35:*.gl=01;35:*.dl=01;35:*.xcf=01;35:*.xwd=01;35:*.ogg=01;35:*.mp3=01;35:*.wav=01;35: $ echo $LS_OPTIONS --color=auto Unfortunately when I run ls I still get non-colored output (running ls --color=auto manually gives me colors). How do I make --color=auto a default ls argument?

  Read the article

• arp problems with transparent bridge on linux

  - by Mink

  I've been trying to secure my virtual machines on my esx server by putting them behind a transparent bridge with 2 interfaces, one in front, one at the back. My intention is to put all the firewall rules in one place (instead of on each virtual server). I've been using as bridge a blank new virtual machine based on arch linux (but I suspect it doesn't matter which brand of linux it is). What I have is 2 virtual switchs (thus two Virtual Network, VN_front and VN_back), each with 2 types of ports (switched/separated or promiscious/where the machine can see all packets). On my bridge machine, I've set up 2 virtual NIC, one on VN_front, one on VN_back, both in promisc mode. I've created a bridge br0 with both NIC in it: brctl addbr br0 brctl stp br0 off brctl addif br0 front_if brctl addif br0 back_if Then brought them up: ifconfig front_if 0.0.0.0 promisc ifconfig back_if 0.0.0.0 promisc ifconfig br0 0.0.0.0 (I use promisc mode, because I'm not sure I can do without, thinking that maybe the packets don't reach the NICs) Then I took one of my virtual server sitting on VN_front, and plugged it to VN_back instead (that's the nifty use case I'm thinking about, being able to move my servers around just by changing the VN they are plugged into, without changing anything in the configuration). Then I looked into the macs "seen" by my addressless bridge using brctl showmacs br0 and it did show my server from both sides: I get something that looks like this : port no mac addr is local? ageing timer 2 00:0c:29:e1:54:75 no 9.27 1 00:0c:29:fd:86:0c no 9.27 2 00:50:56:90:05:86 no 73.38 1 00:50:56:90:05:88 no 0.10 2 00:50:56:90:05:8b yes 0.00 << FRONT VN 1 00:50:56:90:05:8c yes 0.00 << BACK VN 2 00:50:56:90:19:18 no 13.55 2 00:50:56:90:3c:cf no 13.57 the thing is that the server that are plugged in front/back are not shown on the correct port. I suspect some horrible thing happening in the ARP-world... :-/ If I ping from a front virtual server to a back virtual server, I can only see the back machine if that back machine pings something in the front. As soon as I stop the ping from the back machine, the ping from the front machine stops getting through... I've noticed that if the back machine pings, then its port on the bridge is the correct one... I've tried to play with the arp_ switch of /proc/sys, but with no clear effect on the end result... /proc/sys/net/ipv4/ip_forward doesn't seem to be of any use when using a bridge (seems it's all taken care of by brctl) /proc/sys/net/ipv4/conf//arp_ don't seem to change much either... (tried arp_announce to 2 or 8 - like suggested elsewhere - and arp_ignore to 0 or 1 ) All the examples I've seen have a different subnet on either side like 10.0.1.0/24 and 10.0.2.0/24... In my case I want 10.0.1.0/24 on both side (just like a transparent switch - except it's a hidden fw ). Turning stp on/off doesn't seem to have any impact on my issue. It's as if the arp packets where getting through the bridge, corrupting the other side with false data... I've tried to use the -arp on each interface, br0, front, back... it breaks the thing altogether... I suspect it has something to do with both side being on the same subnet... I've thought about putting all my machine behind the fw, so as to have all the same subnet at the back... but I'm stuck with my provider's gateway standing at the front with part of my subnet (in fact 3 appliance to route the whole subnet), so I'll always have ips from the same subnet on both side, whatever I do... (I'm using fixed front IPs on my delegated subnet). I'm at a loss... -_-'' Thx for your help. (As anyone tried something like this? from within ESXi?) (It's not just a stunt, the idea is to have something like fail2ban running on some servers, sending their banned IP to the bridge/fw so that it too could ban them - saving all the other servers from that same attacker in one go, allowing for some honeypot that would trigger the fw from any kind of suitable response, and stuffs of the sort... I am aware I could use something like snort, but it addresses some completely different kind of problems, in a completely different way... )

  Read the article

• SQL Server Management Studio not scripting all objects

  - by Ian Boyd

  i've been attempting to script a database using SQL Server 2005 Management Studio. i cannot get it to script some objects. It scripts others, but skips some. i can provide detailed screen shots the options being selected including all tables the folder where the script files will go the folder being empty before scripting the scripting process saying Sucess when scripting a table the destination folder no longer empty, with a hundred or so script files the script of some tables not being in the folder. And earlier SSMS would not script some views. Is this a known thing that the the Generate Scripts task does not generate scripts? Update Known issue on Microsoft Connect, but Microsoft couldn't repro the steps, so they closed closed the ticket. Fails on SQL Server 2005, also fails on SQL Server 2008. Update Two Some basic questions: 1.What version of SQL Server? Microsoft SQL Server 2000 - 8.00.194 (Intel X86) Microsoft SQL Server 2005 - 9.00.3042.00 (Intel X86) Microsoft SQL Server 2008 - 10.0.2531.0 (Intel X86) Microsoft SQL Server 2005 Management Studio: 9.00.4035.00 Microsoft SQL Server 2008 Management Studio: 10.0.1600.22 2.What O/S are you running on? Windows Server 2000 Windows Server 2003 Windows Server 2008 3.How are you logging in to SQL server? sa/password Trusted authentication 4.Have you verified your account has full access to all objects? Yes, i have access to all objects. 5.Can you use the objects that fail to script? (eg: select top(10) * from nonScriptingTable) Yes, all objects work fine. SQL Server Enterprise Manager can script the objects fine. Update Three They fail no matter what version of SQL Server you script against. It wasn't a problem in Enterprise Manager: Client Tools SQL Server 2000 SQL Server 2005 SQL Server 2008 ============ =============== =============== =============== 2000 Yes n/a n/a 2005 No No No 2008 No No No Update Four No errors found in the database using: DBCC CHECKDB go DBCC CHECKCONSTRAINTS go DBCC CHECKFILEGROUP go DBCC CHECKIDENT go DBCC CHECKCATALOG go EXECUTE sp_msforeachtable 'DBCC CHECKTABLE (''?'')' Honk if you hate SSMS.

  Read the article

• How to remove iso 9660 from USB?

  - by a_m0d

  I have somehow managed to write an iso 9660 image onto my USB drive, which makes all my computer think that the device is actually a CD. I have tried various methods of removing this partition, but nothing seems to work. I have tried fdisk, which says $ fdisk -l /dev/sdb Cannot open /dev/sdb parted crashes when I try to use it on this device. I have even tried $ dd if=/dev/zero of=/dev/sdb but it just hangs with no output (either on screen or on disk). However, when I plug the USB in, it does mount, and I can view (but not edit) the files on it. edit: now the result is $ dd if=/dev/zero of=/dev/sdb dd: opening `/dev/sdb': Read-only file system I have also tried re-formatting it on Windows, but it gets to the end of the format process and then says "Couldn't format the drive". How can I remove this partition and get my whole USB drive back to normal again? EDIT 1: Trying a simple mkfs doesn't work: $ sudo mkfs -t vfat /dev/sdb mkfs.vfat 3.0.0 (28 Sep 2008) mkfs.vfat: Will not try to make filesystem on full-disk device '/dev/sdb' (use -I if wanted) I can't do mkfs on /dev/sdb1 because there is no such partition, as shown:$ ls /dev | grep sdb sdb EDIT 2: This is the information posted by dmesg when I plug the device in:$ dmesg . . (snip) . usb 2-1: New USB device found, idVendor=058f, idProduct=6387 usb 2-1: New USB device strings: Mfr=1, Product=2, SerialNumber=3 usb 2-1: Product: Mass Storage usb 2-1: Manufacturer: Generic usb 2-1: SerialNumber: G0905000000000010885 usb-storage: device found at 4 usb-storage: waiting for device to settle before scanning usb-storage: device scan complete scsi 6:0:0:0: Direct-Access FLASH Drive AU_USB20 8.07 PQ: 0 ANSI: 2 sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sd 6:0:0:0: [sdb] 4069376 512-byte hardware sectors (2084 MB) sd 6:0:0:0: [sdb] Write Protect is off sd 6:0:0:0: [sdb] Mode Sense: 03 00 00 00 sd 6:0:0:0: [sdb] Assuming drive cache: write through sdb: unknown partition table sd 6:0:0:0: [sdb] Attached SCSI removable disk sd 6:0:0:0: Attached scsi generic sg2 type 0 ISO 9660 Extensions: Microsoft Joliet Level 3 ISO 9660 Extensions: RRIP_1991A SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts CE: hpet increasing min_delta_ns to 15000 nsec This shows that the device is formatted as ISO 9660 and that it is /dev/sdb. EDIT 3: This is the message that I find at the bottom of dmesg after running cfdisk and writing a new partition table to the disk:SELinux: initialized (dev sdb, type iso9660), uses genfs_contexts sd 17:0:0:0: [sdb] Device not ready: Sense Key : Not Ready [current] sd 17:0:0:0: [sdb] Device not ready: < ASC=0xff ASCQ=0xffASC=0xff < ASCQ=0xff end_request: I/O error, dev sdb, sector 0 Buffer I/O error on device sdb, logical block 0 lost page write due to I/O error on sdb

  Read the article

• Opscode Chef nginx compile from source issue reports successful run but does nothing

  - by v_abhi_v

  I am trying to install nginx from source in Opscode Chef and its bit weird, it runs complaining nothing but does not install it either. This is how my role attributes look like looks like "nginx":{ "default_site_enabled":false, "version":"1.2.6", "init_style":"init", "install_method":"source", "configure_flags":[ "--without-http_access_module", "--without-http_auth_basic_module", "--without-http_autoindex_module", "--without-http_browser_module", "--without-http_charset_module", "--without-http_fastcgi_module", "--without-http_memcached_module", "--without-http_referer_module", "--without-http_scgi_module", "--without-http_split_clients_module" ], "log_dir":"/var/log/nginx", "binary":"/opt/nginx/sbin/nginx", "source":{ "prefix":"/opt/nginx/dist", "modules":["http_ssl_module", "http_gzip_static_module" ] } }, The chef log shows: [2012-12-19T02:37:44+00:00] INFO: Processing bash[compile_nginx_source] action run (nginx::source line 82) [2012-12-19T02:37:45+00:00] INFO: bash[compile_nginx_source] ran successfully I am clueless on what's going on :(

  Read the article

• ps ux on OSX shows user for ps command to be root? Is this normal?

  - by snies

  I am running OS X 10.6.1 . When i am logged in as a normal user of group staff and do a ps ux it lists my ps ux command as being run by root: snies 181 0.0 0.3 2774328 12500 ?? S 6:00PM 0:20.96 /System/Library... root 1673 0.0 0.0 2434788 508 s001 R+ 8:16AM 0:00.00 ps ux snies 177 0.0 0.0 2457208 984 ?? Ss 6:00PM 0:00.52 /sbin/launchd snies 1638 0.0 0.0 2435468 1064 s001 S 8:13AM 0:00.03 -bash Is this normal behaviour? And if so why? Please note that the user is not an Administrator account and is not able to sudo.

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >