Search Results

Search found 1276 results on 52 pages for 'headphone jack'.

Page 43/52 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

  • My microphone is too quiet (seems to be connected with Skype)

    - by AmitM9S6
    I've been chatting with skype for a long time.. and I don't know why, but for X time it's fine, and then it's too quiet.. Here how it goes : I'm booting the PC - getting into a skype call with friends - talking with friends on skype - (everything goes well) - Closing the skype call - Going back to a skype call like a hour after -. They can't hear me well, I have to shout so they'll hear me, and in the settings, it's on 100% + 30 DECIBELS, so I can't raise it higher... and if I'll re-boot my PC, it'll be well until I'll close the skype call again.. Every time I'm skyping with friends well, and then when I close the call and come back after a while, they hear me really low(volume).. I've been trying to fix this problem for about 2 months! If you'll be able to help me, I'd be so happy. (btw It's connected not through USB, but through a microphone connection and headphone connection...) Also, I got Windows 7..

    Read the article

  • Disable Ethernet permanently to speed up boot time

    - by Anwar Shah
    I do not use the wired Ethernet Card. It seems to me that, Ubuntu is always trying in boot time to check the network via eth0, Which consumes some times and I guess this may slow down the boot process a bit. My dmesg output is below (partial) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985592] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input5 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985651] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 1.985693] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 2.056261] firewire_core: created device fw0: GUID 00023f87af41fd7d, S400 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 3.710435] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null) A big time here..... 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 13.466642] ADDRCONF(NETDEV_UP): eth0: link is not ready 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.125296] Adding 1050620k swap on /dev/sda6. Priority:-1 extents:1 across:1050620k 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.226952] EXT4-fs (sda9): re-mounted. Opts: (null) 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335012] snd_hda_intel 0000:00:1b.0: PCI INT A - GSI 22 (level, low) - IRQ 22 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335091] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.335128] snd_hda_intel 0000:00:1b.0: setting latency timer to 64 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.346410] input: Ideapad extra buttons as /devices/platform/ideapad/input/input6 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.428551] input: HDA Intel Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.436958] cfg80211: Calling CRDA to update world regulatory domain 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.476550] Linux video capture interface: v2.00 2012-06-11 23:06:47 Ubuntu-KDE kernel [ 14.486385] uvcvideo: Found UVC 1.00 device USB 2.0 Camera (04f2:b008) So, My question is How can I disable the Ethernet card completely, so that kernel will not try to use that?

    Read the article

  • Dirt Cheap DSLR Viewfinder Improves Outdoor DSLR LCD Visibility

    - by Jason Fitzpatrick
    If the excitement you felt about having a DSLR capable of shooting video wore off the second you took it outside and realized you needed an expensive add-on viewfinder to use it in sunlight, this cheap DIY viewfinder is for you. The digital video capabilities of new DSLR cameras are amazing and changing the way people interact with movie production. What’s not awesome, however, is how the LCD screen gets completely washed out in bright conditions and you almost always have to buy a $50+ aftermarket accessory to make the LCD functional under those conditions. Courtesty of the Frugal Film Maker we have the following video tutorial showing us how to turn a plastic container, a cheap dollar-store magnifying glass, a headphone ear cover, and some glue and hair ties into a dirt cheap LCD viewfinder. You’ll never have to squint or miss a shot because of bright lighting conditions again–even better yet, you’ll only spend a few bucks for the whole project. For step by step instructions in print form, hit up the link below. Homemade DSLR Viewfinder [Instructables via Make] Latest Features How-To Geek ETC How To Make Disposable Sleeves for Your In-Ear Monitors Macs Don’t Make You Creative! So Why Do Artists Really Love Apple? MacX DVD Ripper Pro is Free for How-To Geek Readers (Time Limited!) HTG Explains: What’s a Solid State Drive and What Do I Need to Know? How to Get Amazing Color from Photos in Photoshop, GIMP, and Paint.NET Learn To Adjust Contrast Like a Pro in Photoshop, GIMP, and Paint.NET Bring the Grid to Your Desktop with the TRON Legacy Theme for Windows 7 The Dark Knight and Team Fortress 2 Mashup Movie Trailer [Video] Dirt Cheap DSLR Viewfinder Improves Outdoor DSLR LCD Visibility Lakeside Sunset in the Mountains [Wallpaper] Taskbar Meters Turn Your Taskbar into a System Resource Monitor Create Shortcuts for Your Favorite or Most Used Folders in Ubuntu

    Read the article

  • Ubuntu 12.04 taking too much time to boot

    - by adarshdinesh
    Ubuntu 12.04 is taking much time for booting, Here is the system kernel message while booting .It is showing that some anacron was killed ,why ? and how to fix the problem ? [ 2.241047] scsi6 : usb-storage 2-1.6:1.0 [ 2.241501] usbcore: registered new interface driver usb-storage [ 2.241895] USB Mass Storage support registered. [ 3.240670] scsi 6:0:0:0: Direct-Access Multiple Card Reader 1.00 PQ: 0 ANSI: 0 [ 3.241791] sd 6:0:0:0: Attached scsi generic sg2 type 0 [ 3.243083] sd 6:0:0:0: [sdb] Attached SCSI removable disk [ 12.568641] Adding 4037904k swap on /dev/sda3. Priority:-1 extents:1 across:4037904k [ 12.615014] udevd[462]: starting version 175 [ 12.651334] mei: module is from the staging directory, the quality is unknown, you have been warned. [ 12.655283] [drm] Initialized drm 1.1.0 20060810 ................... [ 14.118369] init: alsa-restore main process (982) terminated with status 19 [ 14.252595] init: anacron main process (1033) killed by TERM signal [ 14.285763] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0 [ 14.285841] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8 [ 14.285925] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input9 [ 14.285991] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10 [ 14.615073] init: plymouth-stop pre-start process (1222) terminated with status 1 [ 16.447287] wlan0: authenticate with c0:8a:de:7c:60:e8 (try 1) [ 16.448858] wlan0: authenticated [ 16.453405] wlan0: associate with c0:8a:de:7c:60:e8 (try 1) [ 16.456392] wlan0: RX AssocResp from c0:8a:de:7c:60:e8 (capab=0x431 status=0 aid=2) [ 16.456398] wlan0: associated [ 16.457014] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 16.457017] ieee80211 phy0: brcmsmac: brcms_ops_bss_info_changed: associated [ 16.457019] ieee80211 phy0: changing basic rates failed: -22 [ 16.457021] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 0 (implement) [ 16.457226] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 16.654196] ieee80211 phy0: brcms_ops_bss_info_changed: arp filtering: enabled true, count 1 (implement) [ 17.823565] ieee80211 phy0: wl0: brcms_c_d11hdrs_mac80211: txop exceeded phylen 180/256 dur 1946/1504 [ 18.220865] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 26.881422] wlan0: no IPv6 routers present [ 68.228293] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 73.240133] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 76.574490] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 102.180006] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 103.100984] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement) [ 124.171624] ieee80211 phy0: brcms_ops_bss_info_changed: qos enabled: true (implement)

    Read the article

  • 12.04.1 no audio through HDMI

    - by JoJo
    having a bit of an issue with getting audio to go through HDMI. Here are the base specs: OS: Ubuntu Desktop 12.04.1 x64 CPU: AMD A10-5800K 3.8G 4M FM2 R Mobo: MSI FM2-A75MA-E35 OS: Ubuntu 12.04.1 LTS Vid Card: (integrated on CPU) AMD Radeon HD 7660D HDMI sound works fine under Win7 (after mobo and vid drivers are installed), so it's not physically broken. Audio through the normal headphone jacks works fine under Ubuntu. Looking at the audio panel, there is no HDMI output at all. aplay -l also reports only: card 0: Generic [HD-Audio Generic], device 0: ALC887-VD Analog [ALC887-VD Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 In additional drivers there are two versions: ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER ATI/AMD PROPRIETARY FGLRX GRAPHICS DRIVER (post-release update) The first installs, but problem persists. I do get more resolutions to pick from. Second version does not, reporting it failed installation and to find details at: /var/log/jockey.log Looked at the log, and it's insanely long, if necessary I can get it to you guys. Did more research and some had luck by manually installing the drivers, so tried to give that a shot by following this: https://help.ubuntu.com/community/BinaryDriverHowto/ATI#Manually_installing_Catalyst_12.6 starting at 3.1 Manually installing Catalyst 12.6. I immediately had 2 issues, (1) the AMD website does not provide any drivers for Linux, and (2) the following command did not work: sudo sh amd-driver-installer-12-6-x86.x86_64.run --buildpkg Ubuntu/precise sh: 0: Can't open amd-driver-installer-12-6-x86.x86_64.run Some other posts stated to update "alsa-drivers", but that also did not work as install command for the new version of them did not work. I forget the exact issue, but similar to above, cannot open / cannot find. Any help would be greatly appreciated!

    Read the article

  • Sound in Ubuntu 12.10 on Chromebook

    - by Paul Mennega
    I've got an HP Chromebook 14 that I've rooted and installed Ubuntu via Crouton (upgraded to 12.10) and most things are working nicely. One issue that I am having trouble solving relates to sound. I've got sound output that I can control via the individual app (e.g. Youtube), but when trying to control the volume via the built-in xfce4-mixer, I get the following error: GStreamer was unable to detect any sound devices. Some sound system specific GStreamer packages may be missing. It may also be a permissions problem. Opening a terminal, I can run the alsamixer and control the volume levels. It is reporting back that the card is CRAS. I'd love to be able to do it from XFCE and the built-in mixer. I've tried re-installing the GStreamer packages, but no luck. It seems like I am close but not sure where to go from here. On a maybe unrelated note, plugging headphones into the headphone jack in Ubuntu also does not stop the sound from coming from the speakers and nothing comes through the headphones. Switching back to ChromeOs, everything works as expected, so I think that it's a driver issue.

    Read the article

  • Unable To Get Sound Working to External Speaker on HP TouchSmart 320 on 11.04 or 11.10

    - by Schof
    This is an HP TouchSmart 320, model number 320-1200m. I'm using Ubuntu 11.04. Hardware information: root@hp320:/home/mpower# aplay -l **** List of PLAYBACK Hardware Devices **** card 0: Generic [HD-Audio Generic], device 0: STAC92xx Analog [STAC92xx Analog] Subdevices: 1/1 Subdevice #0: subdevice #0 root@hp320:~$ cat /proc/asound/card0/codec#0 | grep Codec Codec: IDT 92HD91BXX Sound to headphone jack works properly, but sound to built-in speakers does not work. I have installed Windows, and with Windows 7 installed, all audio hardware works properly, so this isn't a hardware fault. I've looked at https://help.ubuntu.com/community/HdaIntelSoundHowto and have been unable to find my card in http://www.kernel.org/doc/Documentation/sound/alsa/HD-Audio-Models.txt . I have tried adding almost every conceivable model in the line "options snd-hda-intel model=MODEL" line I added to /etc/modprobe.d/alsa-base.conf. Update 2011-11-09 2:31 PM PST: I've gone to Control Center - Sound Preferences to attempt settings that make sound work. The "Hardware" tab shows one device: "Internal Audio 1 Output / 1 Input Analog Stereo Duplex." There are two output profiles listed in the selection box at the bottom of the tag: Analog Stereo Duplex and Analog Stereo Output. Neither cause sound to emit from the speakers. I've also run alsamixer on the command-line and ensured that everything is set to maximum and nothing is muted. Update 2011-11-09 5:15 PM PST: I've replicated the exact same symptoms in 11.10. Update 2011-11-10 11:31 AM PST: I've filed a bug in launchpad: https://launchpad.net/ubuntu/+source/alsa-driver/+bug/888703

    Read the article

  • Effect of using dedicated NVidia card instead of Intel HD4000

    - by Sman789
    Short version: Can someone please advise me of the effect of adding a dedicated NVIDIA GeForce GT 630M card to an Ubuntu laptop in terms of power consumption and performance gains/losses when doing general productivity tasks and booting up. Also, how good are the closed source, open source, and Bumblebee drivers for these newer cards compared to support for the Intel HD4000? Long version/Background, if any info here is helpful: I'm thinking of ordering a laptop from PC Specialist (a UK company who actually sell machines without Windows pre-installed) with the following specifications: Genesis IV: 15.6" AUO Matte 95% Gamut LED Widescreen (1920x1080) Intel® Core™i5 Dual Core Mobile Processor i5-3210M (2.50GHz) 3MB 4GB SAMSUNG 1600MHz SODIMM DDR3 MEMORY (1 x 4GB) 120GB INTEL® 520 SERIES SSD, SATA 6 Gb/s (upto 550MB/sR | 520MB/sW) Intel 2 Channel High Definition Audio + MIC/Headphone Jack GIGABIT LAN & WIRELESS INTEL® N135 802.11N (150Mbps) + BLUETOOTH Now, as I want this laptop mainly for work and not for games, I would be more than content with the HD4000 integrated chip which comes with the processor. However, for compatibility reasons, I am not able to get the specs I want unless I choose a NVIDIA GeForce GT 630M 1GB graphics card, which I don't have a great deal of use for. I'm willing to buy it, however, as it's still cheaper than any other laptop with the specs I want. However, I know that Linux power management isn't fantastic with open-source graphics drivers, and I don't much about Bumblebee. Basically, whilst I'm happy to 'tolerate' the card being there, I don't want to experience any negative effects on the rest of my system (battery, performance etc) and if there are likely to be any, I might reconsider my purchase. So if anyone can advise me on the effects, I would be very grateful, since I doubt I can just turn the card off. Thankyou for any assistance :)

    Read the article

  • Ubuntu 12.04 + Bluetooth problems with maintaining connection

    - by ifndefx
    I have an Apple Wireless Mouse, Apple Wireless Keyboard, Apple Wireless Trackpad, and a pair of headphones. All of these connect to the computer via a Bluetooth dongle. After several hours I've managed to get the devices paired (all except the headphones) with the computer. However, I'm facing a problem where a connection can't be maintained even with one device. I first started with the gnome bluetooth applet, this couldn't even pick up devices, so I installed blueman, and this at least detected the devices but it couldn't keep the connection going. Then i read somewhere to get hidd installed and use the command line using the mac address of the device (which I got from blueman) and this worked really well, the connection was stable, but there's still a couple of issues that I need help with: If I am to use hidd I need to execute this via terminal, which means for the keyboard and the mouse I need to have two of each. This doesn't make sense. I need the bluetooth daemon to have started with the devices picked up a lot earlier, and especially at grub bootloader. The mouse and the trackpad both work if i use hidd, however, I cannot get the right mouse to work nor the scroll wheel to work. The headphones don't work period, they don't work with any of the bluetooth applets, and with hidd either. When I use blueman aplet, it attempts to pair and states 'Authentication Rejected". The headphone is Phillips SHB9100. If someone can help me with this, I would be grateful.

    Read the article

  • In a SQL GROUP BY query, what value is used for the non-aggregate columns?

    - by Queencity13
    Say I've got the following data back from a SQL query: Lastname Firstname Age Anderson Jane 28 Anderson Lisa 22 Anderson Jack 37 If I want to know the age of the oldest person with the last name Anderson, I can select MAX(Age) and GROUP BY Lastname. But I also want to know the first name of that oldest person. How can I make sure that, when the Firstname values are collapsed into one row by the GROUP BY, I get the Firstname value from the same row where I got the max age?

    Read the article

  • Which MySQL Frontend shows foreign rows?

    - by Jeremy Rudd
    I once came across a MySQL Frontend app that displayed foreign linked rows within the parent row, if for instance the Events table has a foreign key to the Students table: Student ID Name DOB -- ---- --------- [+] 22 Bob 25-1-1984 [-] 21 Jane 25-1-1982 Event ID Student-ID Name Time -- ---------- ---- --------- 1 21 Event A 05:50 1 21 Event B 17:20 [+] 20 Jack 25-1-1980

    Read the article

  • Delete field using curl in couchdb

    - by 2x2p1p
    Hi guys. I searched and didn't found, can I delete a field of a couchdb's document using curl ? The most I can do is delete a document :( curl -X DELETE http://localhost:5984/users/jack?rev=1-cee2abbbe4afefa9b3b5db10260c0c94 Thanks.

    Read the article

  • C++ enum in foreach

    - by Spencer
    I've have a card class for a blackjack game with the following enums: enum Rank { Ace, Two, Three, Four, Five, Six, Seven, Eight, Nine, Ten, Jack, Queen, King }; enum Suit { Clubs, Diamonds, Hearts, Spades }; When I create the deck I want to write the code like this: // foreach Suit in Card::Suit // foreach Rank in Card::Rank // add new card(rank, suit) to deck I believe there is no foreach in c++. However, how do I traverse an enum? Thanks, Spencer

    Read the article

  • Segmenting a double array of labels

    - by Ami
    The Problem: I have a large double array populated with various labels. Each element (cell) in the double array contains a set of labels and some elements in the double array may be empty. I need an algorithm to cluster elements in the double array into discrete segments. A segment is defined as a set of pixels that are adjacent within the double array and one label that all those pixels in the segment have in common. (Diagonal adjacency doesn't count and I'm not clustering empty cells). |-------|-------|------| | Jane | Joe | | | Jack | Jane | | |-------|-------|------| | Jane | Jane | | | | Joe | | |-------|-------|------| | | Jack | Jane | | | Joe | | |-------|-------|------| In the above arrangement of labels distributed over nine elements, the largest cluster is the “Jane” cluster occupying the four upper left cells. What I've Considered: I've considered iterating through every label of every cell in the double array and testing to see if the cell-label combination under inspection can be associated with a preexisting segment. If the element under inspection cannot be associated with a preexisting segment it becomes the first member of a new segment. If the label/cell combination can be associated with a preexisting segment it associates. Of course, to make this method reasonable I'd have to implement an elaborate hashing system. I'd have to keep track of all the cell-label combinations that stand adjacent to preexisting segments and are in the path of the incrementing indices that are iterating through the double array. This hash method would avoid having to iterate through every pixel in every preexisting segment to find an adjacency. Why I Don't Like it: As is, the above algorithm doesn't take into consideration the case where an element in the double array can be associated with two unique segments, one in the horizontal direction and one in the vertical direction. To handle these cases properly, I would need to implement a test for this specific case and then implement a method that will both associate the element under inspection with a segment and then concatenate the two adjacent identical segments. On the whole, this method and the intricate hashing system that it would require feels very inelegant. Additionally, I really only care about finding the large segments in the double array and I'm much more concerned with the speed of this algorithm than with the accuracy of the segmentation, so I'm looking for a better way. I assume there is some stochastic method for doing this that I haven't thought of. Any suggestions?

    Read the article

  • Separate groups of people based on members

    - by tevch
    I have groups of people. I need to move groups with at least one same member as far as possible from each other. Example: GroupA - John, Bob, Nick GroupB - Jack, Nick GroupC - Brian, Alex, Steve As you can see GroupA and GroupB overlap(they both contain Nick) I need an algorithm to set groups as GroupA-GroupC-GroupB Thank you

    Read the article

  • An inaccessible class. VS2010.

    - by Mishgun_
    I realy dont know what the problem is with VS2010. I created a class, and when I'm trying create an exemplar of the class I get an error: "Error xxx is inaccessible due to its protection level. Example: public class Person { Person(string name, int age) { this.name = name; this.age = age; } public string name; public int age; } class Program { static void Main(string[] args) { Person ps = new Person("Jack", 19); } }

    Read the article

  • Using the framework of the problems encountered SharpArch

    - by livebean
    I try to test SharpArch frame, directly in the provided example code to write some code to add test data, but unsuccessful, do not have any information to me! ICustomerRepository customerRepository = new CustomerRepository(); Customer customer = new Customer("Jack Chen"); customer.SetAssignedIdTo("JACKK"); customerRepository.Save(customer); I just had an instance of CustomerRepository operation, do not understand why there is no new data on the data table

    Read the article

  • what is the best mid/high-end class audio/music creation audio sound card?

    - by Chris
    Hello, I have a computershop myself, and I repair computers. But one of the things I really don't know (yet) is the performace od audio cards for music creation with midi. I have searched and searched and came up with some good reviews, but after browsing for a couple of hours I could't see the trees trough the forrest :-D (it's a dutch expression) At one moment I thought the M-Audio - Delta 1010LT would be a good PCIe card, later on I read that this card was released years ago. (but that could be false information) Also any personal expierence would be great, but not necessairy. I have searched a few cards, and I hope someone can help me make a choice for a friend of mine. He's buget is between $100 and $350 I know there are audio cards from $ 500 - $1850,- this is just too expensive. The following specs are crucial: ASIO Midi Mic in minimal 5.1, 7.1 recommended it's not for airplay, but just to compose music at home. using Ableton and midi keyboard. 1. M-Audio - Delta 1010LT: 8 x 8 analog I/O 2 mic preamps or line inputs S/PDIF digital I/O (coaxial) with 2-channel PCM SCMS copy protection control digital I/O supports surround-encoded AC-3 and DTS pass-through 1 x 1 MIDI I/O directly drive up to 7.1 surround (bass management software included) software controlled 36-bit internal DSP digital mixing/routing +4dbu/-10dBV operation individually switched in software word clock I/O for sample accurate device synchronization 2. RME HDSP 9632: * Stereo Analog Ein- und Ausgang, symmetrisch*, 24-Bit/192kHz, > 110 dB SNR * Optionale Erweiterungsboards mit je 4 symmetrischen Ein- und Ausgängen * Alle analogen I/Os voll 192 kHz-fähig, also keine Reduzierung der Kanalzahl * 1 x ADAT Digital In/Out, 96 kHz-fähig (S/MUX) * 1 x SPDIF Digital In/Out, 192 kHz-fähig * 1 x Breakout Kabel für koaxialen SPDIF-Betrieb* * Also bis zu 16 Ein-und Ausgänge gleichzeitig nutzbar! * 1 x Stereo Kopfhörerausgang, parallel zum analogen Ausgang, aber eigene Pegelanpassung * 1 x MIDI I/O für 16 Kanäle Hi-Speed MIDI über Breakout Kabel * DIGICheck, RMEs einzigartiges Meter- und Analysetool mit Spectral Analyser, Professionelle Level Meter 2/8/16-Kanalig, Vector Audio Scope und diversen weiteren Analysefunktionen * HDSP Meter Bridge: Frei skalierbare Levelmeter mit Peak- und RMS Berechnung in Hardware * TotalMix: 512-Kanal Mischer mit 40 Bit interner Auflösung 3. EMU 1212M (1212 M) PCIe: * Top kwaliteit convertors 24-bit/192kHz convertors. * Hardware gestuurde effecten. * DSP zero-latency hardware mixen en monitoring. * Analoge en digitale I/O plus MIDI. * EMU Production Tools Software Bundle - Cakewalk SONAR , Steinberg Cubase LE, Ableton Live E-MU Edition **EMU 1212M PCI-e inputs/outputs:** * 2 balanced jack inputs. * 2 balanced jack outputs. * 24-bit/192kHz ADAT I/O. * 24-bit/192kHz Coaxiale S/PDif I/O switchable to AES/EBU. * MIDI I/O. 4. M-Audio Audiophile 192: - Up to 24-bit/192kHz audio - 2 balanced analog inputs (1/4” TRS) - 2 balanced analog outputs (1/4” TRS) - S/PDIF digital I/O (coaxial RCA connectors) with 2-channel PCM - SCMS copy protection control - Digital I/O supports surround-encoded AC-3 and DTS pass-through - Direct hardware input monitoring via separate balanced 1/4” TRS monitor outputs - Software routing of inputs and outputs - Digital I/O can be routed to/from external effects - 16-channel MIDI I/O - ASIO, WDM, GSIF 2 and Core Audio driver support for compatibility with most applications - 64-bit driver support for Windows - PCI 2.2 compatibility - Apple G5 compatible - Incompatible exceptions - Includes Ableton Live Lite music production software, so you can make music right away - Works with other Delta cards Technical Specifcations: - Compatibility - ASIO - WDM - GSIF 2 - Core Audio

    Read the article

  • Strange beep when using cout

    - by Unknown
    Hello everyone, today when I was working on some code of mine I came across a beeping sound when printing a buffer to the screen. Here's the mysterious character that produces the beep: '' I don't know if you can see it, but my computer beeps when I try to print it like this: cout<<(char)7<<endl; Another point of interest is that the 'beep' doesn't originate from my on board beeper, but from my headphone/speaker Is this just my computer or there something wrong with the cout function? EDIT: But then why does printing this character produce the beep sound? does that mean that I could send other such characters through the cout function to produce different effects?

    Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >