Search Results

Search found 26524 results on 1061 pages for 'laptop display'.

Page 43/1061 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Displaylink USB show "Logo / Loading" on monitor

  - by Ken Le

  I tried with this problem for 2 years already. LOL, today, I install Ubuntu for I have to resolve it or I will back to stupid Windows 7. First, I have 3 monitors. My graphic card is support dual ( ATI Radeon ), so I have no problem on extend those multi monitor on VGA and DVI. The 3rd monitor is Displaylink USB. After installed everything required, when I reboot, the displaylink monitor show "Ubuntu ...." like logo / loading screen. I go to System Display , Detect monitor, it only show my 1st and 2nd, NO 3RD Displaylink. I can move my mouse between those 1st & 2nd, but the 3rd is only show the Ubuntu Screen. I press Ctrl+Alt+1, then screen switch to Displaylink USB 3RD monitor, but its "Terminal" not a desktop. Then I press Ctrl+Alt+7 , the screen switch back to my 1st, 2nd, and the displaylink 3rd is witch back to Logo / Ubuntu again. This is my /etc/X11/xorg.conf : Section "ServerLayout" Identifier "X.org Configured" Screen 0 "aticonfig-Screen[0]-0" 0 0 Screen 1 "DisplayLinkScreen" Leftof "aticonfig-Screen[0]-0" InputDevice "Mouse0" "CorePointer" InputDevice "Keyboard0" "CoreKeyboard" EndSection Section "Files" ModulePath "/usr/lib/xorg/modules" FontPath "/usr/share/fonts/X11/misc" FontPath "/usr/share/fonts/X11/cyrillic" FontPath "/usr/share/fonts/X11/100dpi/:unscaled" FontPath "/usr/share/fonts/X11/75dpi/:unscaled" FontPath "/usr/share/fonts/X11/Type1" FontPath "/usr/share/fonts/X11/100dpi" FontPath "/usr/share/fonts/X11/75dpi" FontPath "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" FontPath "built-ins" EndSection Section "Module" Load "glx" Load "dri2" Load "dbe" Load "dri" Load "record" Load "extmod" EndSection Section "InputDevice" Identifier "Keyboard0" Driver "kbd" EndSection Section "InputDevice" Identifier "Mouse0" Driver "mouse" Option "Protocol" "auto" Option "Device" "/dev/input/mice" Option "ZAxisMapping" "4 5 6 7" EndSection Section "Monitor" Identifier "aticonfig-Monitor[0]-0" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" EndSection Section "Monitor" Identifier "DisplayLinkMonitor" EndSection Section "Monitor" Identifier "0-DFP1" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1680x1050" Option "TargetRefresh" "60" Option "Position" "0 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Monitor" Identifier "0-CRT2" Option "VendorName" "ATI Proprietary Driver" Option "ModelName" "Generic Autodetecting Monitor" Option "DPMS" "true" Option "PreferredMode" "1920x1080" Option "TargetRefresh" "60" Option "Position" "1680 0" Option "Rotate" "normal" Option "Disable" "false" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "NoAccel" # [<bool>] #Option "SWcursor" # [<bool>] #Option "Dac6Bit" # [<bool>] #Option "Dac8Bit" # [<bool>] #Option "BusType" # [<str>] #Option "CPPIOMode" # [<bool>] #Option "CPusecTimeout" # <i> #Option "AGPMode" # <i> #Option "AGPFastWrite" # [<bool>] #Option "AGPSize" # <i> #Option "GARTSize" # <i> #Option "RingSize" # <i> #Option "BufferSize" # <i> #Option "EnableDepthMoves" # [<bool>] #Option "EnablePageFlip" # [<bool>] #Option "NoBackBuffer" # [<bool>] #Option "DMAForXv" # [<bool>] #Option "FBTexPercent" # <i> #Option "DepthBits" # <i> #Option "PCIAPERSize" # <i> #Option "AccelDFS" # [<bool>] #Option "IgnoreEDID" # [<bool>] #Option "CustomEDID" # [<str>] #Option "DisplayPriority" # [<str>] #Option "PanelSize" # [<str>] #Option "ForceMinDotClock" # <freq> #Option "ColorTiling" # [<bool>] #Option "VideoKey" # <i> #Option "RageTheatreCrystal" # <i> #Option "RageTheatreTunerPort" # <i> #Option "RageTheatreCompositePort" # <i> #Option "RageTheatreSVideoPort" # <i> #Option "TunerType" # <i> #Option "RageTheatreMicrocPath" # <str> #Option "RageTheatreMicrocType" # <str> #Option "ScalerWidth" # <i> #Option "RenderAccel" # [<bool>] #Option "SubPixelOrder" # [<str>] #Option "ClockGating" # [<bool>] #Option "VGAAccess" # [<bool>] #Option "ReverseDDC" # [<bool>] #Option "LVDSProbePLL" # [<bool>] #Option "AccelMethod" # <str> #Option "DRI" # [<bool>] #Option "ConnectorTable" # <str> #Option "DefaultConnectorTable" # [<bool>] #Option "DefaultTMDSPLL" # [<bool>] #Option "TVDACLoadDetect" # [<bool>] #Option "ForceTVOut" # [<bool>] #Option "TVStandard" # <str> #Option "IgnoreLidStatus" # [<bool>] #Option "DefaultTVDACAdj" # [<bool>] #Option "Int10" # [<bool>] #Option "EXAVSync" # [<bool>] #Option "ATOMTVOut" # [<bool>] #Option "R4xxATOM" # [<bool>] #Option "ForceLowPowerMode" # [<bool>] #Option "DynamicPM" # [<bool>] #Option "NewPLL" # [<bool>] #Option "ZaphodHeads" # <str> Identifier "Card0" Driver "radeon" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "Rotate" # <str> #Option "fbdev" # <str> #Option "debug" # [<bool>] Identifier "Card1" Driver "fbdev" BusID "PCI:5:0:0" EndSection Section "Device" ### Available Driver options are:- ### Values: <i>: integer, <f>: float, <bool>: "True"/"False", ### <string>: "String", <freq>: "<f> Hz/kHz/MHz", ### <percent>: "<f>%" ### [arg]: arg optional #Option "ShadowFB" # [<bool>] #Option "DefaultRefresh" # [<bool>] #Option "ModeSetClearScreen" # [<bool>] Identifier "Card2" Driver "vesa" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "aticonfig-Device[0]-0" Driver "fglrx" Option "Monitor-DFP1" "0-DFP1" Option "Monitor-CRT2" "0-CRT2" BusID "PCI:5:0:0" EndSection Section "Device" Identifier "DisplayLinkDevice" Driver "displaylink" Option "fbdev" "/dev/fb1" Option "ShadowFB" "off" EndSection Section "Screen" Identifier "aticonfig-Screen[0]-0" Device "aticonfig-Device[0]-0" DefaultDepth 24 SubSection "Display" Viewport 0 0 Virtual 3600 1920 Depth 24 EndSubSection EndSection Section "Screen" Identifier "DisplayLinkScreen" Device "DisplayLinkDevice" Monitor "DisplayLinkMonitor" DefaultDepth 24 SubSection "Display" Depth 24 Modes "1920x1080" EndSubSection EndSection

  Read the article

• Replace LightDM with MDM on Ubuntu 13.10

  - by Daniel

  I'm trying to replace LighDM with MDM on Ubuntu 13.10, but there already is package in Ubuntu sources called mdm. It's not display manager, but "The Middleman System"... So the PPA install doesn't work. I tried installing .deb package and it changed login screen, but gave me an error message after login and then X stopped. I had to revert back... Any ideas on how to install mdm on Ubuntu 13.10...???

  Read the article

• Desktop is too big for my screen

  - by user2829148

  I have an acer widescreen monitor set at 1024x768 running Ubuntu 12.04.4 precise, I have adjusted the resolution to match in display settings however the ubuntu side bar and files are all enlarged. its like it has zoomed in. I have read through all other related posts and cannot come up with a fix. The desktop was fine up until 3 days ago then it changed and I have no idea why, can someone help? Thanks

  Read the article

• Is there a way to detect Layout or Display changes in WPF?

  Hello! I am trying to check how fast the Frame control can display a FixedPage object when it is assigned to Frame.Content property. I plan to check the tick count before and after the assignment to the Content property. Example: int starttime = Environment.TickCount; frame1.Content = fixedpage; int endtime = Environment.TickCount; The problem is that the assignment to the Content property might be asynchronous and returns immediately therefore i get a zero amount of time. The rendering of the FixedPage however visually has a lag time from assignment of the Content property up to the point where the FixedPage appears on screen. The Frame.ContentChanged() event is no good either because it gets triggered even before the FixedPage appears on screen so it's not accurate. I'm thinking of detecting the change on the window or control's display instead in order to get the time when the FixedPage is actually displayed on screen. Is there a way to do this in WPF? Thanks!

  Read the article

• Ubuntu 12.04 installation never finishes

  - by Eric Carlsson

  I am trying to install Ubuntu 12.04 on an old Dell Latitude C400 laptop previously running windows XP using an Ubuntu install CD. The OS runs fine off the CD if a bit slow, and the installation starts off fine. However once the progress bar is filled I get put back to the desktop and nothing happens, first I assumed that the installation was completed but when I restarted the computer and booted from the hard drive nothing happened. I tried to install a few more times but the same thing happens. Am I doing something wrong? I do not get a error message or a installation complete notification. Is there any way I could get some kind of debug screen or log to see if something went wrong or at least follow the installation progress in more detail. Thanks for the help.

  Read the article

• My laptop can not access internet after setup bridge with wired NIC and wireless NIC

  - by Victor S

  I setup a bridge using wired NIC and wireless NIC in order to make wireless NIC as a Wi-Fi AP to share wired internet access, after setup successfully, the Wi-Fi AP works as my expectation, but my laptop can not access internet, please give me a hand. Thanks. My hostapd.conf $ cat hostapd.conf interface=wlan0 bridge=br0 driver=nl80211 ssid=myAP hw_mode=g channel=11 dtim_period=1 rts_threshold=2347 fragm_threshold=2346 macaddr_acl=0 auth_algs=3 ieee80211n=0 wpa=3 wpa_passphrase=PassWord wpa_key_mgmt=WPA-PSK wpa_pairwise=TKIP rsn_pairwise=CCMP Setup steps: $ sudo killall hostapd hostapd: no process found $ sudo hostapd -B hostapd.conf Configuration file: hostapd.conf Using interface wlan0 with hwaddr 00:26:5e:e8:4f:8e and ssid 'myAP' $ sudo brctl addbr br0 device br0 already exists; can't create bridge with the same name $ sudo ifconfig eth0 0.0.0.0 up $ sudo ifconfig wlan0 0.0.0.0 up $ sudo brctl addif br0 eth0 $ sudo brctl addif br0 wlan0 device wlan0 is already a member of a bridge; can't enslave it to bridge br0. $ sudo ifconfig br0 192.168.1.110 netmask 255.255.255.0 $ sudo route add default gw 192.168.1.1

  Read the article

• How to enable wireless on my hp compaq nx6110 laptop

  - by victor

  My laptop is an old HP Compaq NX6110. The wireless switch is not working, and I can`t also enable wireless from connexion manager. I connected to to the Internet with Ubuntu using wired LAN, and I downloaded windows wireless drivers, Wi-Fi radar application, and additional drivers. I also updated to Ubuntu 11.10 but still no luck. I guess I need some terminal commands. Any ideas are welcome. Thank you for the attention victor.

  Read the article

• How can I automatically change the system keyboard layout when plugging in an external keyboard?

  - by Andrew Bolster

  I have a US-Style laptop, which is fine, but I also have a UK-style Ergonomic USB keyboard. As such I usually have the US key layout set, but when I settle in at my desk and use the UK USB keyboard I find myself making stupid mistakes on symbols (normally a pretty good touch typist on either ergo or standard kbd). Can anyone think of a clean way of setting the keyboard layout based on the inferred layout/USBID of any plugged in Keyboard? Even having a custom setting such as adding a specific USB ID to a runtime script that checks if its plugged in or not. Can this be done without the user having to logout/in? I remember doing something similar with xorg.conf, but that required logout.

  Read the article

• Triple-head on a Lenovo T520

  - by codeape

  Lenovo T520 with integrated Intel HD graphics + a NVidia card (Optimus) Ubuntu 11.10 on the computer. I would like to use the built-in screen plus two external screens. This PDF indicates that it is possible to connect up to four external monitors to the laptop. The information is Windows only. I was planning to disable the NVidia card, since I have read that Linux support for Optimus is not good. Questions: Has anyone set up three monitors on NVidia hardware? Has anyone set up three monitors using Intel HD 3000? Can I expect it to work out of the box, or are there tricks I need to be aware of?

  Read the article

• Brightness keys adjust brightness too many times

  - by erjiang

  Every time I hit a brightness key on my laptop's keyboard, it adjusts the brightness by three steps instead of one. How can I fix it so that it only adjusts one step at a time? I am using an Acer Aspire D250 with the newest firmware. It was working better when I was using Ubuntu 10.10 with older firmware (although the scale was off). Any tips on debugging this would be appreciated. Edit: My graphics: 00:02.0 VGA compatible controller: Intel Corporation Mobile 945GME Express Integrated Graphics Controller (rev 03) /sys/class/backlight$ ls acpi_video0 intel_backlight

  Read the article

• Noting happens when I connect my Iphone to my laptop [closed]

  - by Allwar

  Possible Duplicate: Connect iPhone 3g to sync music and act as a mass storage device Hi, I know i can use banshee and libimobiledevice but that is the next step because nothing happens when I connect my Iphone my laptop doesn't realize that the usb port is beeing used! normally it comes up as a photo collection but now, nothing! What should i do? When I say normally I mean when I was using 10.10 I reinstalled a couple of weeks ago. I have an asus 1201n that runs ubuntu 10.04 desktop 64-bit, and I have an Iphone 3g.

  Read the article

• Command works partially when run from startup applications

  - by Gaurav Butola

  I have this script (or rather a set of commands which has permission to execute) to enable two finger scrolling and two finger tap = right click The script is located in /home/gaurav/Multigesture/multigesture. When I run the following command in terminal, two finger scrolling and two finger tap = right click start working. I have to run this command each time I boot my laptop. "/home/gaurav/Multigesture/multigesture" So I put this command in the startup applications so that I dont have to run the command each time I boot but when I reboot two finger scrolling is not working, only two finger tap = right click works. What could be the problem, If the command works fine from the terminal then how come it is working partially when i put it into startup applications. Here is the content of the script xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Two-Finger Scrolling" 8 1 xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Scrolling" 8 1 1 xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Pressure" 32 10 xinput set-int-prop "SynPS/2 Synaptics TouchPad" "Synaptics Two-Finger Width" 32 8 PS. the file which has all the commands (script's) name is multitouch

  Read the article

• Black & White screen after resuming from Suspend [Ubuntu 12.04]

  - by Rakatash

  I recently thought of giving Linux a try with Ubuntu 12.04. So far I managed to figure out how to troubleshoot and fix some of my older issues. But i wasnt able to find a problem similar to mine. The issue is, whenever my laptop starts up after suspend, the screen stays black for a short while. then after that comes a black and white 8-bit kinda screen with nothing else. I am not sure if it's an issue with the graphic card or not. because I am able to write my login password and proceed normally if i wait till this screen shows up...after that everything is displayed normally. is there a fix for this?

  Read the article

• Samsung NP305U1A laptop won't resume from suspension

  - by Oskar Pålsson

  I just bought a Samsung NP305U1A laptop and installed Ubuntu Desktop 12.04 LTS on it. Whenever I suspend the computer and try to wake it back up, the monitor only shows a black screen and the only thing I can do is a hard reset. Kernel: 3.2.0-24-generic Graphic: Radeon HD 6320 Anybody know what to do? UPDATE I did some some research and remebered that I installed the "ATI/AMD proprietary FGLRX graphics driver" from the "Additional drivers" software bundled in Ubuntu. I also tried to install the "ATI/AMD proprietary FGLRX graphics driver (post-release updates)" but whenever I do, it gives me an error and I can't continue So I decided to make a clean install of Ubuntu 12.04 again and when i tried the suspension out-of-the-box, it did work. But since I can't install the drivers I need, HD video is choppy like hell. So perhaps the suspension bug was fixed in the post-release updates of the driver, but sadly I cannot install them, and I don't know why.

  Read the article

• Laptop freezes on boot, not sure where to start

  - by J. Pablo Fernández

  I have an Ubuntu laptop that stops responding when booting up. It will change between consoles with ctrl-alt-FN but pressing enter in the console would not even enter a blank line. The last printed line when booting up in recovery mode was "Skipping EDID probe due to cached edid". Any ideas what might be wrong? Pressing ctrl-alt-del successfully rebooted it when in that mode. Another symptom is that GRUB stopped booting automatically, not sure if related (I doubt it).

  Read the article

• Pls help Installation has ruined laptop

  - by user287694

  Hi this was my time using Linux. So I installed Ubuntu from Windows 7 via USB. After booting into Ubuntu I proceeded to do a full install over windows. This seemed to be going fine but at the point where I was to sign up to Ubuntu one it froze. After awhile maybe 30 mins I realised nothing was going to happen, so I restarted. Now after the bios options bit passes all I get is a prompt flashing at the top left of a black screen. I have tried booting up via USB option but nothing happens, I have tried this 6 or 7 times with fresh usb each time and also with lubuntu. I'm not sure if I have correctly made a live usb obviously I believe I have been but being new I can't guarantee this. Can anyone help me get some functional out of my laptop. Thanks Ben

  Read the article

• Laptop takes a long time to boot after Grub menu

  - by Andres

  I am running a Asus R401VJ laptop (Latin America version of N46VJ) that has a Core i7 CPU and 8GB RAM. After my Grub menu, which is displayed for 2 seconds as I set it up, I'm getting a black screen with a blinking white cursor that is increasing my boot time to about 60 seconds. After a while Ubuntu runs fine, I just want to reduce my boot time. I don't know if this has something to do with my never used Nvidia 2GB GeForce GT 635M graphics card. Always when I tried to install the driver, I ended up with a ~600x800 screen resolution, and I fixed it by deleting a file called: xorg.conf from the /etc/X11/ directory, following a suggestion that I read in another forum. I would appreciate detailed answers, I'm still new at Ubuntu.

  Read the article

• Multiple problems while installing Ubuntu 13.04 on LENOVO G500 laptop

  - by Balazs Kiss

  Dear Community, I encountered several problems when installing Ubuntu on my new Lenovo G500 laptop. First I bumped in the problem (also reported by many other) of the black screen after booting Ubuntu. This problem I recould solve by changing the "quiet splash" record of GRUB to "nomodeset". Ubuntu install was successful then. After the installation, I had a black screen again when booting up for the first time. I booted up again with "nomodeset", and enabled the external AMD driver at Hardware Drivers. Booting still do not worked (only with nomodeset), and when I log in, the system gives me a "System program problem detected" message, and the system (desktop) does not load in. Please, can you advise me what to do? Shall I re-install Ubuntu? What are the steps to make my ubuntu work with this harver? Hardware: LENOVO G500 with IntelCore i5-3230M 3,2Ghz processor and AMD Radeon HD8570 integrated chip Thank you for your help in advance!

  Read the article

• Freezes for unknown reasons, causing fan to go crazy on a Portege laptop

  - by Sünnje

  I have recently installed Natty on a new Toshiba Portege laptop. I find it extremely irritating that the system freezes frequently, about every other time I use the computer. Then the fan goes crazy and I have to force-shutdown. It seems to happen no matter what I do; I encountered this problem when using Firefox, LibreOffice, Adobe Reader - probably when using only terminals too, but I'm not certain. It may be fan-related, because the computer seems to get heated up compared compared to earlier, but I am not sure about that. Any ideas why this could be happening?

  Read the article

• Clonezilla failing as soon as image copying begins

  - by mmr

  I have been trying unsuccessfully to create an image of an Ubuntu 10.04 laptop system. As soon as the copying itself starts, the entire system crashes to a black screen. I suspect that the problem is overheating, and that's why I put an ice pack under the machine. That seems to have helped a bit, but it's still not getting through the copying process. Is there any other possible explanation for dying to a black screen like this? I'm just not relishing the task of removing the hard drive, mounting it elsewhere, and then doing a backup that way.

  Read the article

• no back light on my acer aspire 5734z

  - by Dave

  I installed Ubuntu (12.04) on my acer aspire 5734z and the back light stopped working. I have tried the fix by editing the grub file posted on here a couple of days ago but that hasn't fixed it. I have also looked for hardware drivers but that didn't get me anywhere. When I hook up an external monitor it works fine but i have been unsuccessful getting the laptop display to light up. Thanks edit removed link I found a fix here " http://crunchbanglinux.org/forums/post/66562/#p66562 " if anyone has a better fix than the one in that post, let me know.

  Read the article

• Acting as though the laptop Fn key is pressed

  - by Matt

  I have a Fujitsu laptop and all was working fine until I ended teamviewer. On the keyboard it has a numberpad on some of the letters which you press the Fn button to use. The system is acting like I have the Fn key pressed and I get numbers shown when it should be letters. If I press the Fn key the numbers go to letters. The Fn key is not stuck down. Is there a way to reset keyboard settings or a known fix. The operating system is Ubuntu 11.04 Natty.

  Read the article

• Ubuntu 12.4 cursor changes

  - by mantic0

  I have a weird problem with my Ubuntu 12.4 dual screen setup (Toshiba laptop + one monitor). After a while the cursor on one screen completely changes its shape (not every time). I don't really know how to describe it because it's always something else. Sometimes I get four or five vertical lines instead of a cursor, sometimes I can only see part of the cursor, etc, sometimes weird shade appears. This only happens on one screen simultaneously. If I go to the other screen, the cursor appears to be fine but when I change screens, the cursor changes. I tried to do a screenshot but when I do, the cursor looks just fine. I'm using Unity and Gnome 3 but the problem is on both desktop environments. Nothing is wrong with my screen though because I'm also using Windows and I don't have any problems there.

  Read the article

• How to Tweak the Low Battery Action On Your Windows 7 Laptop

  - by The Geek

  If you’ve got a netbook with really great battery life, you’ll probably still have loads of time left even with only 10% of the battery remaining. Here’s how to tweak the settings so it alerts you or goes into sleep mode at a more reasonable time. Note: obviously if you don’t have a great battery in your laptop, you should probably be careful with these settings or you might lose data. If anything, you’d be better off making the notifications happen sooner in that case Latest Features How-To Geek ETC The 20 Best How-To Geek Linux Articles of 2010 The 50 Best How-To Geek Windows Articles of 2010 The 20 Best How-To Geek Explainer Topics for 2010 How to Disable Caps Lock Key in Windows 7 or Vista How to Use the Avira Rescue CD to Clean Your Infected PC The Complete List of iPad Tips, Tricks, and Tutorials Classic Super Mario Brothers Theme for Chrome and Iron Experimental Firefox Builds Put Tabs on the Title Bar (Available for Download) Android Trojan Found in the Wild Chaos, Panic, and Disorder Wallpaper Enjoy Christmas Beyond the Holiday with Christmas Eve Crisis Parrotfish Extends the Number of Services Accessible in Twitter Previews

  Read the article

• Can't install Ubuntu on a HP DV6 Laptop

  - by EApubs

  I just bought a HP DV6 6011tx (link) Laptop. I formated the disk through Windows and prepared for installing Ubuntu. But when I inserted the live CD, it showed the Ubuntu start screen and then everything went black. There was no cursor, everything just stayed black like the screen was switched off (but the system is running). When I tried to install from the USB, it said Live media is not found. Sometimes it also gave me a black screen like the CD. Does anyone have any idea how to fix this? Thanks!

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >