Search Results

Search found 1586 results on 64 pages for 'restarting'.

Page 43/64 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• How to Format a USB Drive in Ubuntu Using GParted

  - by Trevor Bekolay

  If a USB hard drive or flash drive is not properly formatted, then it will not show up in the Ubuntu Places menu, making it hard to interact with. We’ll show you how to format a USB drive using the tool GParted. Note: Formatting a USB drive will destroy any data currently stored on it. If you think that your USB drive is already properly formatted, but Ubuntu just isn’t picking it up, try unplugging it and plugging it back in to a different USB slot, or restarting your machine with the device plugged in on start-up. Open a terminal by clicking on Applications in the top-left of the screen, then Accessories > Terminal. GParted should be installed by default, but we’ll make sure it’s installed by entering the following command in the terminal: sudo apt-get install gparted To open GParted, enter the following command in the terminal: sudo gparted Find your USB drive in the drop-down box at the top right of the GParted window. The drive should be unallocated – if it has a valid partition on it, then you may be looking at the wrong drive. Note: Make sure you’re on the correct drive, as making changes on the wrong hard drive with GParted can delete all data on a hard drive! Assuming you’re on the right drive, right-click on the unallocated grey block and click New. In the window that pops up, change the File System to fat32 for USB Flash Drives, NTFS for USB Hard Drives that will be used in Windows, or ext3/ext4 for USB Hard Drives that will be used exclusively in Linux. Add a label if you’d like, and then click Add. Click the green checkmark and then the Apply button to apply the changes. GParted will now format your drive. If you’re formatting a large USB Hard Drive, this can take some time. Once the process is done, you can close GParted, and the drive will now show up in the Places menu. Clicking on the drive will mount it and open it in a File Browser window. It will also add a shortcut to the drive on the Desktop by default. Your USB drive is now ready to store your files! Similar Articles Productive Geek Tips Using GParted to Resize Your Windows Vista PartitionInstall an RPM Package on Ubuntu LinuxCreate a Persistent Bootable Ubuntu USB Flash DriveShare Ubuntu Home Directories using SambaCreate a Samba User on Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows Fun with 47 charts and graphs Tomorrow is Mother’s Day Check the Average Speed of YouTube Videos You’ve Watched OutlookStatView Scans and Displays General Usage Statistics How to Add Exceptions to the Windows Firewall Office 2010 reviewed in depth by Ed Bott

  Read the article

• ATG Live Webcast November 2nd: Using Oracle ADF with Oracle E-Business Suite

  - by Bill Sawyer

  After a break for Oracle Open World 2012, the ATG Live Webcast series is restarting this Friday, November 2nd, 2012 with the webcast: Using Oracle ADF with Oracle E-Business Suite: The Full Integration View Oracle E-Business Suite delivers functionality for handling the core business of your organization. This webcast provides an overview of how to use Oracle Application Development Framework (Oracle ADF) to deliver alternative user interfaces to existing Oracle E-Business Suite processes. The webcast also explores integration between the two worlds using the Oracle E-Business Suite SDK for Java. Date:               Friday, November 2, 2012Time:              8:00 AM - 9:00 PM (NOON) Pacific Standard TimePresenters:   Sara Woodhull, Principal Product Manager, E-Business Suite ATG                         Juan Camilo Ruiz, Principal Product Manager, ADF Webcast Registration Link (Preregistration is optional but encouraged) To hear the audio feed:    Domestic Participant Dial-In Number:           877-697-8128    International Participant Dial-In Number:      706-634-9568    Additional International Dial-In Numbers Link:    Dial-In Passcode:                                              103190To see the presentation:    The Direct Access Web Conference details are:    Website URL: https://ouweb.webex.com    Meeting Number:  590254265 If you miss the webcast, or you have missed any webcast, don't worry -- we'll post links to the recording as soon as it's available from Oracle University.  You can monitor this blog for pointers to the replay. And, you can find our archive of our past webcasts and training here. If you have any questions or comments, feel free to email Bill Sawyer (Senior Manager, Applications Technology Curriculum) at BilldotSawyer-AT-Oracle-DOT-com.

  Read the article

• How to Share Files/Folders Between Windows XP, Vista, 7 and Fedora Linux

  - by Akshay Deep Lamba

  Getting started:   To get started, logon to Windows XP and click Start –> then right click ‘My Computer’ and select ‘Properties’.       Then select ‘Computer Name’ tab and click ‘Change’       Enter the Computer and Workgroup name and click OK. Make sure all systems use the same Workgroup name. You will have to restart your computer for the change to take effect.       After restarting, click Start –> Control Panel.       Select Security Center –> Windows Firewall.       When Windows Firewall opens, select ‘Exceptions’ tab and check the box to enable File and Printer Sharing. Close out when done.         Next, logon to Fedora and go to System –> Administration –> Add/Remove Software.       Then search for and install system-config-samba. Install all additional packages when prompted. Ensure that the Network Settings along with Correct Gateway is Mentioned so that your System can Access the Internet. system-config-samba     After installing, go to System –> Administration –> Samba.       Then select Preferences –> Server Settings.         Enter the Workgroup name here and click OK.       Select Preferences –> Samba Users.       Edit or Add User to samba database and click OK.       To create shares, click File –> Create Add Shares, then select the folder you wish to share and check: Writable Visible       Then select ‘Access’ tab and give users access to the shares, then click OK to save.       Next, go to System –> Administration –> Firewall.       Select ‘Samba’ under ‘Trusted Services’ and enable Samba.       Next, select ‘ICMP’ and enable ‘Echo Reply (pong) and Echo Request (ping)’      Also add the eth0 interface to the trusted interfaces.     After that go to Applications –> System Tools –> Terminal and run the command below:   su -c 'chkconfig smb on'     Restart your computer and if everything is setup correctly, you should be able to view shares from either system.           At the terminal: Quote: su setenforce 0 service smb restart service nmb restart exit   ENJOYYY....

  Read the article

• ZTE USB Modem AC2736, connection not possible in Ubuntu 12.04.1 LTS

  - by Fredo

  It's a long post but nearly covers all my experiments and changes I did to my NM. Hope the information is complete and if there are still question, more information can be provided. I've a ZTE AC2736 USB Modem (CDMA modem) which worked fine in Ubuntu 10.04 /11.10. I recently switched to 12.04.1 (precise pangolin). after the switch the first issue I faced was to connect to internet using my USB modem (ISP: Reliance Brand: Netconnect). Tried to run the drivers provided by Reliance but they are old and won't support Kernel 2.6.30 above. since the code was not downloaded with ISO image (of 12.04) i couldn't compile the files provided in such driver. lsusb does detect it as Modem with output similar to 19d2:fff1 ZTE CDMA technologies inc. (or similar as i didn't note it down) If it is detected as USB storage it shows 19d2:fff5 (as per few online forums, i may be wrong here). I used the network Manager and configured the modem to dial #777 (default) and the ISP provided username:password combination. It tries to connect to internet (3-4 times automatically)but fails to get online. once I was able to connect in the monring hours and the message was flashed 'registered on CDMA home network'. I was able to run an update. the kernel was updated with 3.0.2 -pae OR something similar (can find out if required). I surfed the net for about 2 hours later before restarting. After the restart, again the Modem was not able to get me online. I kept trying for many times. I tried changing the setting in NM. One evening after dark I was able to connect to network with same message flash 'registered on CDMA home network' (the message was similar, i'm not precise here,sorry). I was able to surf the net for nearly 3 hours before I switched off my Laptop. I'm not able to get online after that day, It's been 3 days now. I'll try the observered theory of late/early hours sometime soon as mentioned below. Laptop configuration : Make: Lenovo Model: B480 Processor: Intel B950 RAM: 4G DDR3 HDD: 500 G Broadcom Wireless/Bluetooth/Ethernet LAN OS: FreeDOS / Ubuntu 12.04 LTS (dualboot) Kernel 3.0.2-pae Obeservation : I'm able to connect to internet in those hours when generally the speed is high (low usage by other network (wireless) users). like in early mornings or late nights. This is strange as connection should not be dependent on bandwidth usage. Any help would be appraciated to fix this issue. before I decide to cahnge the OS or ISP.

  Read the article

• The Windows 8 and Ubuntu 12.04 Dual Boot NIghtmare

  - by Steve

  I have done some research as to how to go about this dual-boot, and I am close, but I need some guidance with booting into Windows 8 (Ubuntu is installed). I have a Lenovo Ideapad y510p. I will go over what I have done to dual-boot this laptop, with windows 8 pre-installed, with Ubuntu 12.04: I followed every instruction to the letter for the 97-vote response here, and everything worked fine up until after the repair boot section: Installing on a Pre-Installed Windows 8 System (UEFI Supported) I ran into the following error upon restarting after the repair boot section: error: invalid arch independent elf magic. This error (a grub issue) disabled me from booting into Ubuntu :( After a little googling, I followed the instructions in the reactivating grub 2 section to resolve the error: http://kb.acronis.com/content/1686 I found a possible solution to fixing the Windows 8 boot issue, and tried it: http://webcache.googleusercontent.com/search?q=cache:i9JMyXzzRpYJ:askubuntu.com/questions/279275/dual-boot-problem-windows-8-ubuntu-12-04+&cd=1&hl=en&ct=clnk&gl=us&client=ubuntu I thought the above solution worked, but when I attempt to boot into Windows 8, I get the following missing file error: File: \Boot\BCD Status: 0xc000000e Info: The Boot Configuration Data for your PC is missing or contains errors. Here is some other information that may be useful: I have 3 partitions devoted to Ubuntu. The first, sda8, has a flag bios_grub (1049 kb). The second, sda9, is where everything else is (96.6 GB). The last, sda10, is for swap (8299 MB). My question is: How do I fix the boot configuration for Windows 8? Any help would be greatly appreciated :) Update 1: When I attempt to boot into UEFI mode, I get the following error: invalid arch independent elf magic (the same error I saw in step 2). Update 2: A useful link here I found: Dual booting Ubuntu 12.04: UEFI and Legacy So, this is my 4th time installing Ubuntu on the laptop, and it looks like I need to install it in UEFI mode. Should I scrap it all again, and reinstall? Or is there ANY way of salvaging my installation? At this point, I can't even boot into Windows (although I have an installation cd to fix the windows boot issue, that would ultimately screw over ubuntu). Update 3: After doing a little more browsing around, I found a cool way around this messy grub stuff, using rEFInd. Rod Smith's post here saved me! Installing ubuntu 12.04.02 in uefi mode Now, I am able to dual-boot Windows 8 and Ubuntu and boot into both operating systems :) I have another issue (relating to the boot configuration in the bios) that I will post as a separate question :)

  Read the article

• Ubuntu won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Using Movemail with Thunderbird on Ubuntu

  - by rxt

  I'm trying to read local mail with Thunderbird on Ubuntu (with both 12.04 and 13.04). I've followed the instructions found here: How can I access system mail in /var/mail/ via thunderbird? I can read mail on the system using alpine or vim, so I know the mailbox is not empty. When I click the get-mail button, nothing happens. I see no Inbox (or any folder structure) for the specific account. I've set the rights for /var/mail to 1777. Settings server name: localhost username: john How can I get this working? Okay, considering the extra bounty, I would like to get this working like normal mail. The accepted answer from Qasim resulted in a much more usable situation than before - opening mail in Thunderbird with layout. I still face three problems though. When new mail is received in the mailbox, Thunderbird won't see this until after I restart Thunderbird. When Thunderbird is restarted, all mail is reset to unread and deleted mail is undone. This is probably because Thunderbird reads the mail from the /var/mail/www-data file, but doesn't update this file. So after restarting, it simply reads this file again, with the new mail and all old mail. This is probably a postfix issue: mail is sent out to existing mail addresses, but cannot be delivered because the receiving mailserver cannot be reached. This results in "Undelivered mail returned to sender". Only one mailserver can be reached: localhost. Because this is a test system, I don't want real customers to receive mail. I've blocked mail ports in UFW to be sure. When opening the returned mail, I can scroll down and then I see the original mail with proper layout. So I can read the mail, see if the proper images are included, and for me that's workable. Having to restart TB to read new mail - I know when new mail arrives, so I know when to restart. Having old mail restored after a restart - not big problem as well. I can delete the mail file if it gets too much. I know how it works, but it would be nice if it worked like normal.

  Read the article

• GPU hung when switching graphic card

  - by Lie Ryan

  I have a laptop (Dell Inspiron N4110) with a switchable graphic. $ lspci | grep VGA 00:02.0 VGA compatible controller: Intel Corporation 2nd Generation Core Processor Family Integrated Graphics Controller (rev 09) 01:00.0 VGA compatible controller: ATI Technologies Inc NI Whistler [AMD Radeon HD 6600M Series] (rev ff) Normally, my laptop starts with both graphic cards enabled, which caused the laptop to turn very hot and the fan to become very noisy. I have been using a small script to disable the Radeon card. For some time, I'm quite happy with this arrangement. However, I have been having some issues with the Intel card (IGD), the Intel card often randomly hang when running OpenGL apps; and so I want to give the Radeon card (DIS) another chance. I have never been able to switch to the Radeon card, but recently, I found out that if I do a "delayed switching" (DDIS): # echo "DDIS" > /sys/kernel/debug/vgaswitcheroo/switch root@lieryan-dell-ubuntu:/sys/kernel/debug/vgaswitcheroo# cat switch 0:IGD:+:Pwr:0000:00:02.0 1:DIS: :Pwr:0000:01:00.0 then I logoff (i.e. to restart X), the screen switch to pseudo-tty and then it stuck there freezing. At this situation, mouse and keyboard stops working so I can't switch to another ptty. I tried ssh-ing from another computer to salvage logs (dmesg at that point) and whatnot; I found out that when freezing, the active graphic card is the AMD card: -- this is from ssh -- # cat switch 0:IGD: :Off:0000:00:02.0 1:DIS:+:Pwr:0000:01:00.0 but the GPU is apparently hung, looking at dmesg gives: ... [ 1411.649974] vga_switcheroo: client 0 refused switch [ 1411.649985] vga_switcheroo: setting delayed switch to client 1 [ 1423.911759] vga_switcheroo: processing delayed switch to 1 [ 1424.006564] fbcon: Remapping primary device, fb1, to tty 1-63 [ 1424.006799] i915: switched off [ 1424.840351] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1425.718088] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1426.622377] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1427.355683] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id [ 1428.193549] [drm:drm_mode_getfb] *ERROR* invalid framebuffer id ... the invalid framebuffer id error is repeated for many times over ... I were able to successfully recover by switching back to the Intel card and restarting X from ssh; indicating that only the Radeon card has problems switching. System info: $ uname -a Linux lieryan-dell-ubuntu 3.0.0-14-generic #23-Ubuntu SMP Mon Nov 21 20:28:43 UTC 2011 x86_64 x86_64 x86_64 GNU/Linux $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 11.10 Release: 11.10 Codename: oneiric The laptop also do not have the option to set graphic card at BIOS and the proprietary driver, fglrx, also have never worked; when I installed it through jockey ("Additional Drivers"), glxinfo showed that it still being rendered by Mesa, the /sys/kernel/debug/vgaswitcheroo directory has gone missing, and the driver crashes with a traceback if I use xorg.conf to tell X to use fglrx. Anyone had any idea if it is possible to use this AMD card either with the radeon or the fglrx driver? logs: dmesg

  Read the article

• SOASuite 11.1.1.4 : Error Logging into BPM11g Composer?

  - by angelo.santagata

  Hey all, I’ve just installed SOA Suite 11.1.1.4 and noticed a few funnies which people might hit, thankfully each of them have an easy solution.   1. Some applications are installed but dont appear to work? If when you install SOASuite you may notice that the following applications dont appear to work, however they do appear as deployments in Weblogic Server Console e.g.  SOA Composer (composer), FMW Welcome Page Application (11.1.0.0.0) and some of the adaptors. If they appear in the deployments list state as “installed” and not Active, then its likely that they haven't been targeted to a specific server.   The solution is to target the application the desired managed server , e.g. AdminServer in a development environment. This is done by selecting the application, tab “Targets”, select all components, Button[change Targets] and select the appropriate server. This change can be done without restarting the Weblogic Server 2. You might find that when you try to log into the BPM Composer at http://machine:7001/bpm/composer , the login screen will appear but you cant log in. The error log might mention the following   The solution to this is two fold, a) When creating the domain, avoid using 127.0.0.1 as the Listener address, or “Any Addresses”, if this is a development machine create an alias in your /etc/hosts file and then use this alias in the domain creation wizard. e.g.   my host file contains an entry     mypc     127.0.0.1   And in the Fusion middleware Configuration wizard   Twill then work!   if it still doesnt you can try setting the ServerURL attribute to http://mypc in the SoaInfraMBean instead of blank. This is accomplished by using Enterprise Manager. Use the System MBean Browser to navigate to Application Defined MBeans->oracle.as.soainfra.config->[ server]->SoaInfraConfig->soa-infra. Then changing the value of 'ServerURL' to http://mypc   Failing that give support a call….

  Read the article

• Ubuntu won't connect to wired network

  - by djeikyb

  I'm running 10.04, upgraded from 9.10, maybe, but probably not upgraded from 9.04. I have two wifi routers. Zeus is connected to the dsl modem. Hermes uses a wds bridge with Zeus to extend the network. My desktop (Daedalus) is ethernetted to Hermes. My laptop (Clyde) is wifi, switching to Hermes or Zeus as needed. Occasionally, as in whenever I transfer a large file from desktop to laptop, the wds bridge will die. Fixing it means restarting both routers, though it seems Hermes should boot first. This is ridiculous, and eventually I'll get around to asking you guys to help me stop it from happening. More importantly is that my desktop requires a reboot to get back on the network. WTF. ifconfig shows my nic has no ip. /etc/init.d/networking restart doesn't do anything, not even give me a lousy ip. dhcpcd eth1 grants me an ip address, but doesn't help with internet access. route -n shows what looks like my normal routing table, but pinging google.com informs me it's an unknown host. jake@daedalus:~$ route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 10.1.1.0 0.0.0.0 255.255.255.0 U 0 0 0 eth1 169.254.0.0 0.0.0.0 255.255.0.0 U 0 0 0 eth1 0.0.0.0 10.1.1.1 0.0.0.0 UG 0 0 0 eth1 It may be worth noting that I can ping both Zeus (10.1.1.1) and Hermes (10.1.1.4) and my laptop (10.1.1.55). Much obliged for any help. Rebooting is, well, trivial in this instance. But it's stupid. I switched to linux because I like the idea that if one part breaks, you fix it instead of reboot reboot reboot. I've left my poor desktop in disarray, confining myself to my little netbook. My desktop is broken, awaiting magical commands from you brilliant folk. (and yes, i know clyde the netbook should be named icarus. it was its original name. ironically the ssd burned out, and i felt it wasn't right when it came to reinstalling)

  Read the article

• Ubuntu Linux won't display netbook's native resolution

  - by Daniel

  FYI: My Netbook model is HP Mini 210-1004sa, which comes with Intel Graphics Media Accelerator 3150, and has a display 10.1" Active Matrix Colour TFT 1024 x 600. I recently removed Windows 7 Starter from my netbook, and replaced it with Ubuntu 12.10. The problem is the OS doesn't seem to recognise the native display resolution of 1024x600 i.e. the bottom bits of Ubuntu is hidden beneath the screen & the only 2 available resolutions are: the default 1024x768 and 800x600. I've also thought about replacing Ubuntu with Lubuntu or Puppy Linux, as the system does run a bit slow, but I can't, as then I won't be able to access the taskbar and application menu which will be hidden beneath the screen. Only Ubuntu with Unity is currently usable, as the Unity Launcher is visible enough. I was able to define a custom resolution 1024x600 using the Q&A: How set my monitor resolution? but when I set that resolution, there appears a black band at the top of the screen and the desktop area is lowered, with bits of it hidden beneath the screen. I tried leaving it at this new resolution and restarting the system to see if the black band would disappear & the display will fit correctly, but it gets reset to 1024x768 at startup and displays following error: Could not apply the stored configuration for monitors none of the selected modes were compatible with the possible modes: Trying modes for CRTC 63 CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 63: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 63: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1) Trying modes for CRTC 64 CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 0) CRTC 64: trying mode 1024x768@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@60Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 800x600@56Hz with output at 1024x600@60Hz (pass 1) CRTC 64: trying mode 640x480@60Hz with output at 1024x600@60Hz (pass 1)

  Read the article

• Why is everything crashing?

  - by Kopkins

  I've been using Ubuntu for a while now and I love it, I wouldn't think of using another OS unless I can't fix this issue. The install I'm on is only around a month and a half old. I'm running 12.04 64bit on a 8,1 MBP. Up until around 2 weeks ago everything was running smoothly. Around then applications started crashing and weird things started happening. At first I thought it was just certain applications. The first thing to start giving me trouble was compiz. Occasionally compiz will stop decorating windows and lost many other functionalities. running compiz --replace fixes this, but I don't feel like doing it usually once a day. The other thing with this is that after running compiz --replace, my conky window gets lost somewhere and so I run killall conky && conky -c .conkyrc. But this isn't with just a couple applications, it seems like it is proliferating through my system. Last week fontforge started crashing while doing whatever task. So I ended up unable to finish what I was working on to completeness. Didn't find a fix. Today rhythmbox started crashing. Whenever I try to play anything, Rhythmbox becomes unresponsive and needs to be forced to close. When I try to do certain things with the disk utility, it crashes. I get the Ubuntu has experienced an internal error message much more often than I would like. Frequently applications stop appearing in the launcher. Wine almost never does anymore. After not being active for a little while, thunderbird can only fetch my mail after restarting wireless, sudo rmmod b43 && sudo modprobe b43 Occasionally some of my startup apps don't start. What is my best option here? Could they be bugs? I don't want to submit a ton of vague bug reports. Reinstall? switch OS? Thank you to anyone who responds. Kopkins

  Read the article

• Damaged external NTFS hard disk

  - by Thanos

  A few days ago, I used my external hard disk (a 2TB Seagate) in order to transfer some files on Windows Vista. During that, I noticed some malfunctions on my system (it was running too slow, Windows Explorer crashed). When Explorer crashed, file transportation stopped. I was afraid, but I tried to access my files and it seemed to be working. I tried to open a movie (from the external disk) but it couldn't load. I thought of restarting, but this took sooo long... So I unplugged the hard disk and at that time it managed to shut down. I logged on to Windows Vista but the hard disk couldn't be mounted. I plugged it but nothing happened. I unplugged it and I heard this specific sound that notifies that something has been unplugged. I thought of logging to Ubuntu 10.04 and see what I can do. I plugged the hard disk, but I couldn't see it. I opened GParted but I couldn't see it either. I tried with Disc Utility and there it was! I tried to mount it but a got an error message stating that an error occured with Windows, there is a file (0,0) that has problem or something like that. It suggested to log into Windows and run chkdsk /f and reboot twice. The thing is that I am somehow afraid to do so because I don't really know the impact on that. Plus I don't trust doing even a check on Vista... I finally risked it and I typed chkdsk/f on a cmd. I cannot, however, actually run it because I don't have admin privileges. So from search I found chkdsk, I right cliked and selected “run as administrator”. It run but I got a message like NTFS file system. It should check at the coming restart. At that point I am mistaken. I thought that f meant F but this is not the case here... Does anyone have any suggestions and advice?

  Read the article

• A Windows Update Prevented Live Discs From Working? [migrated]

  - by user88311

  First off I'll state my system specs. Acer Aspire M1100 Windows Vista Home Basic 32bit OEM 2 Gigs of DDR2 ram 160Gig hard drive 2.7Ghz AMD Athlon 64 processor ATI Radeon X1250 Graphics card A few days ago my computer did automatic updates and updated windows defender to KB915597 (Definition 1.135.415.0), After which when shutting down and starting up I would receive BSOD with the information BUGCODE_USE_DRIVER and 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x877330000) upon where my computer would not start up with any USB devices plugged in and it always require me to run startup repair before it started. Upon when I first started it up and was able to fully boot windows, I had no use of the mouse so I was unable to install the fix that the windows solutions center brought up on my screen, so I restarted again and installed the fix hoping it would cease the problem, it did not. Upoon starting up after installing the fix and restarting I was confronted with the BSOD 0x000000FE (0x00000008, 0x00000006, 0x00000006, 0x83291000) at which I found the startup repair could not fix the problem and I restored, as I most like should have in the first place. After going through that I read that simply installing the latest defender version from the microsoft site had fixed this problem for others, so I did that, to find I still received the BSOD's. So in a attempt to find a fix to the problem I went to the microsoft answers site to try to find a way to fix the problem, there I was told to simply disable defender and reboot to see if that fixed the problem, upon doing this my computer would no longer even startup, when I boot normally I get to just when the loading screen finishes and then my computer restarts and when I run startup repair, it runs for about 15 seconds and then my computer restarts as well. I have tried running ubuntu live discs in order to simply access the drive and simply copy and paste the 2 month old physical backup I have of my C drive to the C drive, but whenever I run the live OS when it gets to the end of the load screen and is about to boot, the computer again restarts, yet if I put in a gparted disc, I am able to boot it fully, although it does not give me access to the file system just partition managing and when I attempt to access the internet through it, the computer once again restarts. So my question is, how could the update and what has happened prevent me from running the live OS's properly?

  Read the article

• How to use tscon on Windows7?

  - by Radek

  I need to run overnight automation testing using RFT and IE on Windows7 virtual machine. I found that restarting the Windows box before the testing starts helps. I am moving the production environment from Windows XP to Windows 7. RFT used to complain when running RFT scripts that CRFCN0557E: Activation failed when running under a Terminal Services environment. This may be caused by using a minimized terminal window - try playing back without minimizing the terminal window (it does not need to be full-screen). Running tscon.exe 0 /dest:console prior starting any RFT script fix the error on Windows XP. But not on Windows7. I did some research and was trying for hours to fix that but nothing helped. There is no screen saver turned on on Windows7. I tried to run both but nothing helped. tscon.exe 0 /dest:console tscon.exe 1 /dest:console On Windows7 tscon returns {ErrorPrintf(): LoadString failed, Error 15105, (0x00003B01)} Error [15105]:The resource loader cache doesn't have loaded MUI entry. Error [0]:The operation completed successfully. On Windows XP tscon returns Could not connect sessionID 0 to sessionname console, Error code 7045 Error [7045]:The requested session access is denied. I just double checked that running tscon.exe 0 /dest:console on Windows XP solves the issue. Cannot understand the output of the tscon command then. Any idea how I can run RFT scripts after I restart the Windows box automatically? Preferably without involving any other computer. I was even thinking to use the old Windows XP to make remote desktop session to make RFT happy. I hope there is other better solution to that.

  Read the article

• "shutting down hyper-v virtual machine management service"

  - by icelava

  I have a Windows 2008 R2 server that is a Hyper-V host (Dell PowerEdge T300). Today for the first time I encountered an odd situation; i lost connection with one of the guest machines but logging on physically it seems the guest OS is still running but no longer contactable via the network. I tried to shut down the guest machine (Windows XP) but it would not shut down, getting stuck in a "Not responding" dialog box that cannot be dismissed. I used the Hyper-V management console to reset the machine and it could not get out of resetting state. I tried to save another Windows 2003 guest machine, and it would be progress with its Saving state (0%). The other running Windows 2003 guest was stuck in the logon dialog. My first suspicion is perhaps one of the Windows update patches this week (10 Nov 2011) may something to do with it, which was still pending a system restart. Well, since I could not do anything with Hyper-V i proceeded with the Windows Update restart, and now it is stuck half an hour at "Shutting down hyper-v virtual machine management service" Prior to restarting I did not observe any hard disk errors reported in the system event log; doubt it is a disk-related condition. Shall I force a hard reboot? UPDATE As per answer report, it eventually restarted itself.

  Read the article

• Apache - child process exited with status 255

  - by Brian

  I am running Windows 7 64-bit with an older version of (Apache 2.0.59) and PHP 5.2 - just switched from XP and wanted to keep the same versions. Everything will initially be working fine, but then I'll be trying to load a page and Apache crashes. I'll get an error in the browser that says "The connection to the server was reset while the page was loading." Then Apache stops running. Sometimes it can be restarted, but then crashes again on the next page load. Sometimes it can't even be restarted at all. Looking in the Apache error logs, I see a series of messages that goes something like: [notice] Apache/2.0.59 (Win32) PHP/5.2.13 configured -- resuming normal operations [notice] Server built: Jul 27 2006 15:55:03 [notice] Parent: Created child process 1220 [notice] Child 1220: Child process is running [notice] Child 1220: Acquired the start mutex. [notice] Child 1220: Starting 250 worker threads. [notice] Parent: child process exited with status 255 -- Restarting. I have just come from Win XP where I never had any problems - is this an issue with my Apache version on Win7? Or perhaps it's a configuration issue? Any help would be greatly appreciated, I've done days of research and found nothing helpful. Thanks, Brian

  Read the article

• Networking stopped working on Ubuntu

  - by 1337Rooster

  I installed Ubuntu 10.04 through the Wubi installer (Funny, I installed it today and thought I would have gotten 10.10). I had a network connection and everything was working fine. I rebooted my coumputer a couple of times and then suddenly, I could not connect to the network and when I click the wireless/networking icon it says "Networking Disabled". I reinstalled Ubuntu and the problem went away. After a few reboots the problem returned. I have tried restarting to see if it would come back as well as a few other things listed below. Any other suggestions would be appreciated. Tried to restart networking via /etc/init.d/networking: amato@ubuntu:~$ sudo /etc/init.d/networking restart * Reconfiguring network interfaces... Ignoring unknown interface eth0=eth0. [ OK ] Tried to stop and start it: amato@ubuntu:~$ sudo /etc/init.d/networking stop * Deconfiguring network interfaces... [ OK ] amato@ubuntu:~$ amato@ubuntu:~$ sudo /etc/init.d/networking start Rather than invoking init scripts through /etc/init.d, use the service(8) utility, e.g. service networking start Since the script you are attempting to invoke has been converted to an Upstart job, you may also use the start(8) utility, e.g. start networking networking stop/waiting Tried start networking: amato@ubuntu:~$ start networking start: Rejected send message, 1 matched rules; type="method_call", sender=":1.58" (uid=1000 pid=2241 comm="start) interface="com.ubuntu.Upstart0_6.Job" member="Start" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo start networking networking stop/waiting Tried service networking restart: amato@ubuntu:~$ service networking restart restart: Rejected send message, 1 matched rules; type="method_call", sender=":1.60" (uid=1000 pid=2248 comm="restart) interface="com.ubuntu.Upstart0_6.Job" member="Restart" error name="(unset)" requested_reply=0 destination="com.ubuntu.Upstart" (uid=0 pid=1 comm="/sbin/init")) amato@ubuntu:~$ sudo service networking restart restart: Unknown instance: Here are the contents of my /etc/network/interfaces. auto lo iface lo inet loopback I even tried to modify it to this (based on something I read, online, not sure if I was doing the right thing here). Tried everything again and no luck: auto lo eth0 iface lo inet loopback iface eth0 inet dhcp

  Read the article

• Outlook 2007 unable to connect to exchange server

  - by mattwarren

  I came into the office a week ago and outlook has refused to connect ever since, it just says "Disconnected" in the bottom right-hand corner. I've tried restarting it, rebooting Windows etc. I'm the only one if our office who is having this problem, so it's not a general problem with the server. Things I've tried Pinging the server via IP address and host name, both work fine Connecting via OWA, this works using the same machine name Connecting to Exchange via HTTP ("Outlook Anywhere") doesn't work None of the suggestions in this question helped, http://serverfault.com/questions/21755/can-ping-exchange-server-cant-connect-outlook-to-it Disabling Windows firewall on my laptop also has no effect. There are no items in the event viewer that indicate that anything it up. Also no permissions have changed on the server since when it worked. Update: I've just tried logging onto a completely different PC, using my domain controller user-name/password. When I setup outlook on there it also fails, so the problem isn't specific to 1 pc/outlook it's something about my particular user name, but not when using OWA? What else can I do to diagnose this, any suggestions?

  Read the article

• Nginx unknown limit_req_zone

  - by Kayle

  Nginx currently will not start due to the error mentioned in the title. Here's the actual error I'm getting: $ sudo /etc/init.d/nginx restart Restarting nginx: nginx: [emerg] unknown limit_req_zone "one" in /etc/nginx/sites-enabled/www.myhashimotosthyroiditis.com:15 nginx: configuration file /etc/nginx/nginx.conf test failed And this is immediately following creating the VM in question (www.myhashimotosthyroiditis.com), using a template I found here that was supposedly the "out-of-the-box-for-lazy-people" templates. I'm very new to Nginx and I could not find any helpful information via google or searching here, so I beg my pardon if this is a product of stupidity. Here is the entirety of the VM file: server { listen 80; server_name myhashimotosthyroiditis.com www.myhashimotosthyroiditis.com; root /var/www/myhashimotosthyroiditis; access_log /var/log/nginx/myhashimotosthyroiditis.access.log; error_log /var/log/nginx/myhashimotosthyroiditis.error.log; location / { try_files $uri $uri/ /index.php; } location /search { limit_req zone=one burst=3 nodelay; rewrite ^ /index.php; } fastcgi_intercept_errors off; location ~* \.(?:ico|css|js|gif|jpe?g|png)$ { expires max; add_header Pragma public; add_header Cache-Control "public, must-revalidate, proxy-revalidate"; } include php.conf; # You may want to remove the robots line from drop to use a virtual robots.txt # or create a drop_wp.conf tailored to the needs of the wordpress configuration include drop.conf; }

  Read the article

• InnoDB: Error: log file ./ib_logfile0 is of different size

  - by jack

  I just added the following lines in /etc/mysql/my.cnf after I converted one database to use InnoDB engine. innodb_buffer_pool_size = 2560M innodb_log_file_size = 256M innodb_log_buffer_size = 8M innodb_flush_log_at_trx_commit = 2 innodb_thread_concurrency = 16 innodb_flush_method = O_DIRECT But it raise "ERROR 2013 (HY000) at line 2: Lost connection to MySQL server during query" error restarting mysqld. And mysql error log shows the following InnoDB: Error: log file ./ib_logfile0 is of different size 0 5242880 bytes InnoDB: than specified in the .cnf file 0 268435456 bytes! 100118 20:52:52 [ERROR] Plugin 'InnoDB' init function returned error. 100118 20:52:52 [ERROR] Plugin 'InnoDB' registration as a STORAGE ENGINE failed. 100118 20:52:52 [ERROR] Unknown/unsupported table type: InnoDB 100118 20:52:52 [ERROR] Aborting So I commented out this line # innodb_log_file_size = 256M And it restarted mysql successfully. I wonder what's the "5242880 bytes of log file" showed in mysql error? It's the first database on InnoDB engine on this server so when and where is that log file created? In this case, how can I enable innodb_log_file_size directive in my.cnf? EDIT I tried to delete /var/lib/mysql/ib_logfile0 and restart mysqld but it still failed. It now shows the following in error log. 100118 21:27:11 InnoDB: Log file ./ib_logfile0 did not exist: new to be created InnoDB: Setting log file ./ib_logfile0 size to 256 MB InnoDB: Database physically writes the file full: wait... InnoDB: Progress in MB: 100 200 InnoDB: Error: log file ./ib_logfile1 is of different size 0 5242880 bytes InnoDB: than specified in the .cnf file 0 268435456 bytes! Resolution It works now after deleted both ib_logfile0 and ib_logfile1 in /var/lib/mysql

  Read the article

• SSH error 114 when connect with FinalBuilder 7

  - by mamcx

  I'm testing FB 7 and try to connect to my Mac OS X Snow Leopard machine. I can connect with paramiko (python SSH library) but not FB7. The only thing I get is: SSH error encoutered: 114 I try stopping & restarting the share session on Mac OS X. update: I enable server debug and get this log: debug1: sshd version OpenSSH_5.2p1 debug1: read PEM private key done: type RSA debug1: private host key: #0 type 1 RSA debug1: read PEM private key done: type DSA debug1: private host key: #1 type 2 DSA debug1: rexec_argv[0]='/usr/sbin/sshd' debug1: rexec_argv[1]='-Dd' debug1: Bind to port 22 on ::. Server listening on :: port 22. debug1: Bind to port 22 on 0.0.0.0. Server listening on 0.0.0.0 port 22. debug1: fd 5 clearing O_NONBLOCK debug1: Server will not fork when running in debugging mode. debug1: rexec start in 5 out 5 newsock 5 pipe -1 sock 8 debug1: inetd sockets after dupping: 3, 3 Connection from 10.3.7.135 port 49457 debug1: Client protocol version 2.0; client software version SecureBlackbox.8 debug1: no match: SecureBlackbox.8 debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.2 debug1: privsep_preauth: successfully loaded Seatbelt profile for unprivileged child debug1: permanently_set_uid: 75/75 debug1: list_hostkey_types: ssh-rsa,ssh-dss debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: client->server aes128-ctr [email protected] none debug1: kex: server->client aes128-ctr [email protected] none debug1: expecting SSH2_MSG_KEXDH_INIT debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: KEX done debug1: userauth-request for user mamcx service ssh-connection method none debug1: attempt 0 failures 0 debug1: PAM: initializing for "mamcx" Connection closed by 10.3.7.135 debug1: do_cleanup debug1: PAM: setting PAM_RHOST to "10.3.7.135" debug1: do_cleanup debug1: PAM: cleanup debug1: audit_event: unhandled event 12

  Read the article

• How do I host node.js apps with pm2 without running them as root?

  - by jishi

  I have setup pm2 to run a node.js application, and I can successfully start it and it will resurrect upon reboot. However, the pm2 daemon is ran as root, which makes me think that all my node-scripts also runs as root? Even though I added them as a regular user in the system. The log files and stuff is created in the users home dir, /~/.pm2/logs, but the logs are owned by root. when I invoke pm2 startup (which handles the installation of the init.d script etc), it creates /etc/init.d/pm2-init.sh which looks like this: #!/bin/bash # chkconfig: 2345 98 02 # # description: PM2 next gen process manager for Node.js # processname: pm2 # ### BEGIN INIT INFO # Provides: pm2 # Required-Start: # Required-Stop: # Should-Start: # Should-Stop: # Default-Start: 2 3 4 5 # Default-Stop: 0 1 6 # Short-Description: PM2 init script # Description: PM2 is the next gen process manager for Node.js ### END INIT INFO NAME=pm2 PM2=/usr/local/lib/node_modules/pm2/bin/pm2 NODE=/usr/local/bin/node export HOME="/root" start() { echo "Starting $NAME" $NODE $PM2 stopAll $NODE $PM2 resurrect } stop() { $NODE $PM2 dump $NODE $PM2 stopAll } restart() { echo "Restarting $NAME" stop start } status() { echo "Status for $NAME:" $NODE $PM2 list RETVAL=$? } case "$1" in start) start ;; stop) stop ;; status) status ;; restart) restart ;; *) echo "Usage: {start|stop|status|restart}" exit 1 ;; esac exit $RETVAL When I dump the processes (which is what it will use when resurrecting the processes), I see mentions of user "USER":"pi" but I don't think that it's actually run as user pi. Any thoughts?

  Read the article

• SCVMM 2008 R2 problems migrating VM from VS2005 to Hyper-V host

  - by Scott Ivey

  I have System Center Virtual Machine Manager 2008 R2 installed, and have a Hyper-V R2 host and a Virtual Server 2005 host. I'm trying to migrate my machines from the VS2005 host to the Hyper-V host, and keep getting the following error... VMM is unable to complete the requested file transfer. The connection to the HTTP server myserver.mydomain.local could not be established. (Unknown error (0x80072efd)) Recommended Action Ensure that the HTTP service and/or the agent on the machine myserver.mydomain.local are installed and running and that a firewall is not blocking HTTPS traffic. (Note - migrations between Hyper-V hosts managed by the VMM server work fine - my problem is just going from VS2005-Hyper-V hosts) I have no firewalls turned on on either of the servers, and no firewalls in the middle. I've looked all over for answers to this problem, and am getting nowhere. All the articles I find when searching are talking about either V2V or P2V - and i'm just trying to do a straight migrate VM. I've tried rebooting the boxes, changing the BITS SSL port number, restarting services, triple-checking firewalls, etc. Does anyone have any good suggestions as to how I can resolve this problem?

  Read the article

• Unable to install PHP-FPM on Apache (Failed to connect to FastCGI server)

  - by Nyxynyx

  I have been having problem installing php-fpm for use with apache2-mpm-worker. This is the guide that I am following. According to the guide's Step 5, Alias /php5-fcgi /usr/lib/cgi-bin/php5-fcgi FastCgiExternalServer /usr/lib/cgi-bin/php5-fcgi -host 127.0.0.1:9000 -pass-header Authorization However I cannot find php5-fcgi at /usr/lib, but only /usr/bin/php5-cgi and /usr/bin/php-cgi, which I am not sure if they are the same. So I changed the lines in Step 5 to: Alias /php5-fcgi /usr/bin/php5-fcgi FastCgiExternalServer /usr/bin/php5-fcgi -host 127.0.0.1:9000 -pass-header On restarting Apache, it's logs gave the errors: [notice] caught SIGTERM, shutting down [alert] (4)Interrupted system call: FastCGI: read() from pipe failed (0) [alert] (4)Interrupted system call: FastCGI: the PM is shutting down, Apache seems to have disappeared - bye [notice] Apache/2.2.22 (Ubuntu) mod_fastcgi/mod_fastcgi-SNAP-0910052141 configured -- resuming normal operations [notice] FastCGI: process manager initialized (pid 16348) And on loading the index page [error] [client 10.0.2.2] (111)Connection refused: FastCGI: failed to connect to server "/usr/bin/php5-cgi": connect() failed [error] [client 10.0.2.2] FastCGI: incomplete headers (0 bytes) received from server "/usr/bin/php5-cgi" [error] [client 10.0.2.2] File does not exist: /var/www/mydomain/public/favicon.ico Question: Any idea why php5-fcgi is missing, and how should this problem be fixed? Thank you!! :)

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >