Search Results

Search found 18580 results on 744 pages for 'wireless connection'.

Page 43/744 | < Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >

• Can I connect an external antenna to a range extender?

  - by ercan

  I live in a kind of dormitory and the next access point is 60 meters away from my room. So I bought a range extender (TP-Link WA730RE) and installed it into my room in the same height as the access point. But my problem is still not solved. The reception is slightly better but my connection still gets broken every two minutes. The antenna that comes with this range extender was 4dB. My question is, can I buy an 8dB external antenna (like this one: http://www.amazon.com/TP-Link-TL-ANT2408C-Desktop-Omni-Directional-Antenna/dp/B0034CQSKW/ref=sr_1_14?ie=UTF8&qid=1332074993&sr=8-14) and replace it with the antenna that comes with the range extender? Or is this external antenna only suitable for the "receiver" end of the connection, i.e. the computer?

  Read the article

• D-Link DWA-125 constantly disconnecting in winXP, but works fine on ubuntu..

  - by sil3nt

  Hey there, I'm dual booting winXp and ubuntu 10.10. I'm using a DWA-125 usb adapter to connect to my home wifi connection and I'm having this odd issue. First off, in ubuntu the adapter works fine and I have no trouble at all, but when I boot back in XP I get a dlink connetion wizard and the connection times out after every 2 minutes. It's odd because I can actually load up web pages and use the internet for 2 minutes, and then it would disconnect and the whole thing would repeat. I did a system restore on xp and this stopped the whole connect-disconnect thing but once I booted into ubuntu and came back to xp it started all over again!(?). Any ideas as to how I would go about fixing this?

  Read the article

• HP Photosmart C4780 printer/scanner breaks netgear WNDR3700v3 router on connection

  - by CodeJunkie

  A few months ago, we upgraded our Netgear router's firmware. Immediately, we started having trouble connecting to the internet. Each time this problem would happen, every device in the house would stop being able to make new connections to the internet. For example, you couldn't open new pages in the browser, but if Skype was running when the problem happened, you could keep talking to people. The only solution to this problem seemed to be resetting the router to factory defaults. Eventually, we solved this problem by just downgrading the router firmware. A while later, we got a new Netgear router. Almost right away, the new router started having exactly the same problems as the old one did on current firmware. The network connection would stay active and the computer would say it had an internet connection, but you couldn't do anything online except for using Skype. We eventually figured out that this happens every time our HP printer gets onto the network. Any time the printer gets onto the wireless network, the whole network stops connecting to the internet almost completely. The only thing that will fix it at that point is to reset the router to factory specs, and unplug the printer so it can't get back onto the network. The Netgear router has the latest version of the firmware, but the printer/scanner is very old. It looks to me like this problem is probably a result of a firmware conflict between the printer and the router, but I'm not sure how to fix that problem. Here's some additional information: Printer: HP Photosmart C4780 Router: WNDR3700v3 Router firmware: V1.0.0.22_1.0.17 (Stock, up to date firmware) Why would the printer getting on the network cause the router to not be able to access the internet correctly until it was reset? What can be done to allow the printer to be on the network without breaking the network for all other devices? Edit: One other thing that happens during this internet problem is that multiple computers in the house display an "IP conflict" message repeatedly, and extremely frequently (as often as every five to ten minutes, and every time a connection to the wireless is made).

  Read the article

• Internet connection problem,ping ok , but outlook and browsers dont work

  - by Ashian

  Hi, From some days ago I have a big problem on my laptop( run windows xp sp3) When I connect to internet I can ping web sites but when try to browse them some times it work correctly and some times the connection to server intrupted and I have to refresh the page several times. in this case browser show a connection problem immediatly after I click on address bar or a link on page( wihtout any try to connect to server) I use FireFox and opera and both of them have this problem. try another ISP and still I have this problem. I didnt use any proxy server and check the proxy setting. In this case Outlook also can't connect to mail server. this problem anfter some time or after restart windows have been fixed for a while. I check for virus and can't find anything. Is there any idea how can I fix it? UPDATE: Thanks for your responses. I test them , also I use Open DNS setting and that dosent help me. last night I see that my local web application ( such as Adsl modem config web site , and sites that I set up on windows xo IIS ) aslo can't open and Internal Communication error apears ( Opera Message) that didnt relate to DNS settings or Internet connection.

  Read the article

• No internet on some devices, still on WiFi

  - by Joost

  Ok, here's the situation. I live with 3 friends, and we often sit in the living room with laptops out. There's a WiFi router in the kitchen, and we have quite a stable connection. The issue, however, is this: sometimes, all of a sudden one of my friends loses internet connection. Even disconnecting/reconnecting to the WiFi network does not help. When we restart the router, though, it works like a charm again. The odd thing is, it happens just for this one Windows 7 laptop. We've switched routers (for a different reason) in the mean time, but the issue remained. This makes me suspect the laptop even more. I realise I've given little details, but I don't really know what to try/do. Any suggestions what it might be?

  Read the article

• How to interconnect laptop, PC, Android & Symbiam phones with WiFi?

  - by noquery

  What I have Level One wifi Router hub Laptop with Windows 7 (wifi enabled) Desktop PC with Windows 7 (with no wifi, maybe LAN cables can help) 2 android & 1 Symbian Phones each wifi enabled. LAN Cables Hathway Internet connection which allows only 1 login to access internet What I want Is it possible to access internet on PC, laptop, mobiles at the same time with only one connection? Since I don't know even A of networking so please suggest some software which require minimum cofiguration. Let me know if any other hardware I require.

  Read the article

• External HDD connecting via USB disconnects wireless LAN connection

  - by Kensai

  Strange problem. I have this MEDION Akoya PC that has a dedicated bay to slide an external HDD sold separately. It's very handy indeed cause the slot is providing a fast USB 3 connection and power to the HDD unit, without extra cables. All works fine except this show-stopper behavior to disconnect me from the router once I slide in the unit and it powers up. The moment I connect the unit the (normally) three-four WiFi connections I see in my neighborhood disappear and my own to the router loses its signal strength (no Internet traffic is possible). After a while it throws me off that one as well, never to connect me again as long as the unit is powered. Once I disconnect the HDD the various signals come back and it automatically reconnects to my own. What takes? Are we in front of a serious design fault by MEDION here? Does the spinning of the HDD on top of the PC cause electromagnetic interference strong enough to throw off my WiFi connectivity? Is it a simple USB problem? Some kind of strange hardware conflict? Where should I look?

  Read the article

• How to set connection string dynamically in NHibernate

  - by jcreddy

  Hi I want assign connection string for NHibernate using following code and getting exception (bold). log4net.Config.DOMConfigurator.Configure(); Configuration config = new Configuration(); IDictionary props = new Hashtable(); props["hibernate.connection.provider"] = "NHibernate.Connection.DriverConnectionProvider"; props["hibernate.dialect"] = "NHibernate.Dialect.MsSql2000Dialect"; props["hibernate.connection.driver_class"] = "NHibernate.Driver.SqlClientDriver"; props["hibernate.connection.connection_string"] = @"Integrated Security=SSPI;Persist Security Info=False;Initial Catalog=Sample;Data Source=HYDHTC92318D\SQLEXPRESS"; props["hibernate.connection.current_session_context_class"] = "web"; props["hibernate.connection.show_sql"] = "true"; props["hibernate.connection.proxyfactoryfactory.factory_class"] = "NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle"; foreach (DictionaryEntry de in props) { config.SetProperty(de.Key.ToString(), de.Value.ToString()); } config.AddAssembly("nhibernator"); factory = config.BuildSessionFactory(); session = factory.OpenSession(); The ProxyFactoryFactory was not configured. Initialize 'proxyfactory.factory_class' property of the session-factory configuration section with one of the available NHibernate.ByteCode providers. Example: NHibernate.ByteCode.LinFu.ProxyFactoryFactory, NHibernate.ByteCode.LinFu Example: NHibernate.ByteCode.Castle.ProxyFactoryFactory, NHibernate.ByteCode.Castle Please let me know the solution. Regards JCReddy

  Read the article

• Optimize SQL connection?

  - by user1484035

  I am building a multi-page web project in HTML and Javascript that is constantly reading from AND writing to an SQL database. I can connect to the database and successfully run my project with this type of connection. var connection = new ActiveXObject("ADODB.Connection") ; var connectionstring="Data Source=<server>;Initial Catalog=<catalog>;User ID=<user>; Password=<password>;Provider=SQLOLEDB"; connection.Open(connectionstring); var rs = new ActiveXObject("ADODB.Recordset"); rs.Open("SELECT * FROM table", connection); rs.MoveFirst while(!rs.eof) { document.write(rs.fields(1)); rs.movenext; } rs.close; connection.close; Works great and runs fine. BUT, the first 5 lines (from var connection = to var rs =) causes the whole browser to freeze for a few seconds while it establishes the connection. I need to speed that up since I am constantly connecting to the database throughout my project. Is there a more effective way of connecting to a SQL database? or is my computer just bad and this should run faster?

  Read the article

• netsh add profile returns "An attempt was made to load a program with an incorrect format."

  - by Tunisia

  Using netsh, I used the following command to add a wireless profile add profile filename="c:\profiles\DLINK-Profile.xml" interface="D-Link DWA-125 N150" All parameters are valid. But I get the error "An attempt was made to load a program with an incorrect format." I know this error is related to OS architecture 64bit or 32 bit. But i'm not sure which program is not compatible. I'm using Win7 64bit

  Read the article

• What is your best travel WiFi router?

  - by Sorin Sbarnea

  I'm looking for a small WiFi router that I could use to create my own wireless network when I travel. I'm also interested in a router that has very good signal/antenna and that is easy to take with you.

  Read the article

• Setting up a WPA-PSK network card to connect to a WPA2 network

  - by mattshepherd

  I'm currently doing a spare-parts build to put a media computer in the living room, and having a devil of a time getting my Rosewill RNX-6300 wireless card to connect to my network. I'm trying to set it up using Windows as opposed to the proprietary Rosewill software -- the Rosewill software is a little over my head. It can find the network fine, but when I try to connect, I don't get the password prompt -- it moves straight to "validating identity," scans, and then says "Windows was not able to find a certificate to log you on to the wireless network Foo." The maddening thing is that the card was working fine a week ago, in the same box, using the same OS. I pulled everything out, swapped out the motherboard, and reinstalled Windows on a freshly wiped hard drive, and now I can't get it up and running again. Suggestions? I've taken several runs at it, including attempting to manually change the settings for the network to include WPA-PSK and AES and the password, and I'm a bit worried that I've totally boned everything. My router settings: ipconfig/all results from the XP box: Again, this card was working on this network a week ago. I can't figure out why I can't get it up and running now. There's no WPA2 on the card, just WPA and WPA-PSK: WPA-PSK was the only setting that would let me enter a network key. I had TKIP and AES as options there, but cipher type is AES on the router, so I chose that. (I tried TKIP later, when this didn't work, with the same results as described below.) So I set it to WPA-PSK / AES and entered my security key. It's mixed letters and numbers, 32 characters long. No joy. Still "waiting for reply" in the main screen, and "cannot find certificate" on the pop-up. And if I try again and return to the settings again, it is reset to Open/AES. It also re-enables 802.1x in the Authentication tab if I've deselected it with WPA-PSK. It also reshortens the password. I have no idea how I blundered into getting this working in the past. I am, as you can tell, far from proficient at this. It was working before, though. What am I getting wrong?

  Read the article

• apache webserver unresponsible with server-status showing all child processes waiting for connection

  - by Jeff

  My setup: i have 3 nearly identical webserver machines serving the same high loaded dynamic website with simple load balancing over dns. The service has been working for over two ears with the same apache config. apache2, php5, ubuntu 8.04 linux 2.6.24-29-server My problem: since about two weeks i'm experiencing problems with this config. Nearly every day i have one small moment about 5 minutes, in which the website is unreachable. I'm still able to login to the servers over ssh. If i run htop, i see the machine simply doing nothing. i have about 1000 apache processes running, but no cpu activity. i've used the apache mod_status to debug this situation. the process scoreboard looks like this: _C.___K_______________________R._______.__K_K____K___C_______.__ _______C__________.___________________________________.________C _.____K__________K___K_WK_____._K_____________________________._ W______K__________K________.____________________._______C_______ _C_.__K__K____.._.._____________________________________C_______ _R___________K___.______C________.C_________.______._____C______ ____________KKC____K_____K__WC_________________C_____.__.____.__ _____________________C_________K______.____C______._____________ _.___C____.___.___________________________.K______.____K________ W__.___________________C.__.____K________K_______R_._.__._______ __C__C_.__________C__C_______._____W______________C_.___C_______ ____.______C_____________C________.____C____________.________._K __.__________.K_____________K_________._____C____.K__________KW_ __K.W________R_________._______.___W___________.____.__K_____W__ W___.___..________W____K Scoreboard Key: "_" Waiting for Connection, "S" Starting up, "R" Reading Request, "W" Sending Reply, "K" Keepalive (read), "D" DNS Lookup, "C" Closing connection, "L" Logging, "G" Gracefully finishing, "I" Idle cleanup of worker, "." Open slot with no current process So the most of the processes are just waiting for connection. after about 5 minutes the situation will return to normal: i have lot least processes on every machine, the most workers have the "."-status (meaing they are open to process a request) and of course the website is reachable! so i'm trying to find something in the logs, but there is simply nothing... the apache access log is silent for about 4 minutes, the same is for the error log. i also can not figure out anything wrong in other system logs. the situation is the same on all 3 webservers (all of them have this load peak and unresposibility at the same time), so i do not thing this is hardware related. but i think, this might be related to some network (tcp) issue. any ideas? EDIT: some more information, that i have just discovered: it has just happened again. and i was able to verify that i'm also not able to connect locally when this problem occurs. i have made some connection statistics with the following command after it happend netstat -an|awk '/tcp/ {print $6}'|sort|uniq -c 109 CLOSE_WAIT 2652 ESTABLISHED 2 FIN_WAIT1 11 LAST_ACK 12 LISTEN 91 SYN_RECV 1 SYN_SENT 16 TIME_WAIT If i execute the same command some time later, i have something like this: 4 CLOSING 108 ESTABLISHED 18 FIN_WAIT1 182 FIN_WAIT2 37 LAST_ACK 12 LISTEN 50 SYN_RECV 11276 TIME_WAIT So in the normal situation i have only 100-200 open connections by clients beeing handled by apache in this moment. when i have this "crash", i have a lot more connections. what is the best way to analyse this? EDIT2: the important lines in apache2.conf are: KeepAlive On MaxKeepAliveRequests 20 KeepAliveTimeout 1 <IfModule mpm_prefork_module> ServerLimit 920 StartServers 30 MinSpareServers 80 MaxSpareServers 120 MaxClients 920 MaxRequestsPerChild 700 </IfModule> it is an apache2 prefork with php_mod. the server has 8GB ram and a 4gb swap partition.

  Read the article

• Does connection pooling work fine to execute 60 DB queries to load a page?

  - by willem

  We use Linq2Sql in an ASP.NET application. Unfortunately the eager-loading in Linq2Sql isn't as powerful as in Entity Framework, so a lot of the data has to be lazy loaded as needed. Taking connection pooling into account, is it OK for a web page to execute 60 queries to load a page? Executing a single big query probably won't be much better, as those 60 queries will all those connection pooled connections and not open a new connection each time (which I realize is slow). Any thoughts?

  Read the article

• How can I configure the embedded wireless card in a Toshiba Satellite Pro 4600 to work under Lubuntu 10.10?

  - by MoLE

  I'm struggling to get the embedded wireless card in this laptop to work. In 7.10 (gutsy) it worked fine. Now I'm trying to get 10.10 (maverick) working on it, and am using the Lubuntu flavour due to the low resources of this laptop. The hardware: Appears to be an embedded pcmcia card. pccardctl ident gives: Socket 0: product info: "TOSHIBA", "Wireless LAN Card", "Version 01.01", "" manfid: 0x0156, 0x0002 function: 6 (network) The default kernel recognises the card and loads the orinoco_cs driver. orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0001:0006:000e orinoco_cs 0.0: Firmware determined as Lucent/Agere 6.14 Then for some reason, the driver isn't happy with this and gives: orinoco_cs 0.0: Hardware identity 0005:0002:0001:0002 orinoco_cs 0.0: Station identity 001f:0002:0009:0030 orinoco_cs 0.0: Firmware determined as Lucent/Agere 9.48 All seems ok until I try to associate with my access point using Network Manager. eth1: Lucent/Agere firmware doesn't support manual roaming repeated about 10 times then NM gives up. According to the linuxwireless.org wiki page on this driver, this is a known issue, and I quote: Known issues Roaming and WPA_supplicant Lucent/Agere firmware doesn't support manual roaming On the Agere cards, roaming is controlled by the firmware instead of userspace. You will get the above message if userspace attempts to associate with a specific AP rather than by SSID. If you are using wpa_supplicant use ap_scan=2 mode. NetworkManager uses wpa_supplicant, so the above also applies. At this point my google-fu has failed me, and I can't find how to configure network manager to use the mystical "ap_scan=2" mode via wpa_supplicant. I have tried the following suggested solutions (from launchpad or the forums) deleting the agere* files from /lib/firmware using wicd instead of network manager combining both blacklisting the orinoco_cs driver in an attempt to force use of the hostap_cs driver instead (in case it is a prism2 card). Obviously none of them have worked for me. Any hints on how to perform the suggested workaround above? Edit: I have also confirmed working on 8.10 (intrepid) live CD.

  Read the article

• External WiFi Adapter for Eee PC 1000?

  - by Peter M

  I have an original Eee PC 1000 running the stock Xandros. I have run into problems where the internal WiFi card does not seem to have enough sensitivity to connect to a lot of access points. Although the computer will report APs in the area, unless the signal strength is over 80% (as reported by the Wireless networks application) I cannot seem get a connection. So is there a recommended USB WiFi adapter that is known to work with the Eee PC/Xandros system or in general with a Debian based system?

  Read the article

• Wifi problems after upgrading to 13.10

  - by Simon

  I just upgraded to Ubuntu 13.10, but since the upgrade I don't have internet access via wifi anymore. I can: See networks Connect to a network Ping myself (localhost, 192.168.0.103) I can't: Ping others (including other devices on the same wireless network, including the gateway/router) Resolve hosts Access any other external resource, whether on my own network or on the internet Using Wireshark, I noticed my computer is continuously sending ARP-requests like "Who has 192.168.0.1 [which is the gateway]? Tell 192.168.0.103". It doesn't get any replies though. When I ping another IP-address for which it knows the mac-address (from cache), it turns out a packet loss of 90% occurs, and even if a packet manages to arrive it takes around 3000ms. The output of route -n is: Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 192.168.0.1 0.0.0.0 UG 0 0 0 eth1 192.168.0.0 0.0.0.0 255.255.255.0 U 9 0 0 eth1 192.168.122.0 0.0.0.0 255.255.255.0 U 0 0 0 virbr0 Before upgrading, wifi worked fine. Using other devices, wifi still works fine.Resetting the router didn't help. Ethernet still works after upgrading. Any suggestions? Update: I'm using the wl driver. Here's the relevant output of some commands: lspci | grep Wireless 03:00.0 Network controller: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter (rev 01) cat /etc/modprobe.d/blacklist.conf [...] blacklist mac80211 blacklist brcm80211 blacklist cfg80211 blacklist lib80211_crypt_tkip blacklist lib80211 blacklist b43 cat /etc/rc.local sudo modprobe -r lib80211 sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_wep.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_tkip.ko sudo insmod /lib/modules/3.2.0-30-generic-pae/kernel/net/wireless/lib80211_crypt_ccmp.ko sudo modprobe wl exit 0 The last lines are probably how I got wireless working after the previous upgrade (wireless has been a problem after each upgrade). Update 2: added information about the exact hardware below. The hardware is an integrated device, so I ran lspci -nn | grep -i network. The output is: 03:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11bgn Wireless Network Adapter [14e4:4727] (rev 01)

  Read the article

• Share openVPN connection

  - by Douglas Gemignani

  Hello, Currently I have a server (dev tun) running openVPN and my WinXP client is able to connect to the server just fine. I have an ethernet device and I need to send data to a computer under the server's network, so since the device can't connect on its own I need to configurate my Windows XP to share its VPN connection. So, on my WinXP machine i have: Network Adapter #1 (ip 192.168.0.2 gw 192.168.0.1 with internet access). OpenVPN Connection (dhcp). Network Adapter #2 (crossover cable with device). Here is my client.ovpn cert gertec.crt key gertec.key client ns-cert-type server user nobody group nobody remote IP PORT ca ca.crt dev tun dev-node OpenVPN proto udp resolv-retry infinite nobind comp-lzo verb 3 I would appreciate any help.

  Read the article

• Cisco PIX 515 internet connection

  - by Steve

  We have a ASDL modem connected to a Cisco PIX 515 to a switch. We have managed to get the PIX setup with ethernet1 (inside) with our IP range 192.168.5.1-192.168.5.254 and the internal network is working fine. We are having difficulty getting a connection from the PIX through the router on ethernet0 (outside). We have managed to ping external networks by setting up IMCP echo/echo-reply but are unable to setup any other protocols in a similar manner. Can any one help with a few lines that could be typed into the console that will allow this connection?

  Read the article

• How to use connectify to share files between 2 laptops, one running Windows 7?

  - by p2pnode

  I have 2 laptops one running XP and another Windows 7. Both have WiFi-card installed. I want to be able to share files between these 2 machines and then in next step also be able to share internet connection. I have heard that Connectify on Windows 7 is a very handy and easy tool to set up a hotspot and other machines even XP,Vista can connect to this host hotspot and share files and internet connection. I am able to search for the network (set on host) on my client machine. But how to share files? I don't see any such menu or anything. Also after I have installed connectify on Windows 7, I am not able to connect to internet using data card. It throws error that "Error 31:A A device attached to the system is not functioning". And on client machine, if I connect to data card, as well as connect to wireless network setup by host machine, I no longer am able to access internet, even though the data card is connected. The browser throws error: Please help. Any other utility similar to connectify etc?

  Read the article

• How to make DD-WRT router's (configured like a repeater) devices be accessible on LAN? (i.e. integrate DHCP for both routers)

  - by Annonomus Penguin

  I have a D-Link DIR-600-A1 router running DD-WRT (using the 601's firmware: except for the model number, they are near identical). It has an Atheros chip, so there is no "repeater" option. You can bypass this by setting the main radio as a client to the main router, and adding a virtual radio configured as an AP. You can then set up the credentials for connecting to the main router and allowing devices to connect to the repeater/router. I have a few devices on my network: Ethernet computers Server with Samba running WiFi devices connected to the main router I then wanted to add a repeater. I have a couple of other things on the repeater: WiFi Computer Other WiFi devices. Anyway, I wanted to connect my WiFi computer to the share on my server via Samba. However, for some reason, my router treats the main router as WAN, not another device. I've tried disabling the SPI firewall: However, that doesn't work. I've tried pinging my WiFi computer from my server. However, I can ping my server from my WiFi computer. AFAIK, they are on the same subset, just using different IPs: the main one uses 192.168.0.x and the repeater uses 192.168.1.x (starting at 100 for some reason). It seems as I need to configure my router(s) to work together for DHCP. I noticed there was a "DHCP forwarder" option, but I have no idea what that would do. A quick note: for some reason (that's beyond me) my ISP disabled the capability to bridge a WiFi to ethernet connection with the router they provide (something about PPPoE or similar...). The service rep I talked to when I was having issues after I changed ISPs said that, but they couldn't explain exactly what they were "blocking." How can I get DD-WRT to not treat the client connection as WAN and the router to recognize the devices connected to the repeater?

  Read the article

• Linksys WAP54G v3.1 no access, power and link LED solid

  - by user142113

  I'm managing the Network of a small enterprise. A Linksys WAP54G v3.1 used to provide the WiFi network. I was called, because the device did not provide a WiFi network anymore. I first of all tried to ping the device via LAN, but there was no reaction. I've frequently reconnected the AP to the mains and always the POWER and the LINK LED keep solid, even if no network cable is connected. What I've done yet: Reset as documented: Pressed the RESET button for 10 seconds. After that I have tried to access the AP with a direct cable connection to my computer, that I've set to a static ip of 192.168.1.240, but i got no ping response on the default IP 192.168.1.245. Furthermore ipconfig reports "media disconnected". More complex reset method as described here http://bruceshankle.blogspot.de/2005/12/how-to-reset-linksys-wap54g.html as well had no effect. also tried to ping 192.168.1.1 without success Tried this method: http://www.daniweb.com/hardware-and-software/networking/threads/142437/linksys-wireless-access-point-problem#post680245 but there was no ping response when powering up. As well the tftp transfer timed out Finally tried to short pin 15 and 16 of the flash chip on the bottom side of the AP mainboard while booting to provoke a Checksum error. This should lead to the possibility to upload a firmware with tftp, as the AP stops booting and waits for a tftp connection on 192.168.1.1. But I've had no success. As well i've put pin 15 and 16 to ground while booting, also without an effect. After all that I still can't ping the AP, ipconfig still tells me "media disconnected". The POWER and LINK LED are solid. I would appreciate your answers

  Read the article

• Internet connection sharing: Ubuntu 9.10 Server on Windows 7 and VMWare

  - by avesse

  I'm trying to get Internet Connection Sharing (ICS) working between my Windows 7 RTM host and a Ubuntu 9.10 Server running on VMWare Workstation 6.5, but I have not been able to get it right. Here's what I have done: Configured VMWare to use Host Only networking (I tried NAT as well). Enabled ICS on my host's network connection, allowing VMnet1. After enabling it, Windows informed me that its VMnet1 IP has changed to 192.168.137.1. So in VMWare's Virtual Network Editor I configured VMnet1: Subnet 192.168.137.0 Mask 255.255.255.0 I did the same for DHCP. For NAT i set 192.168.137.1 as Gateway. I cannot ping any sites or get access through apt-get/aptitude install/update, although domains do get resolved to IPs. I have also tried using a static IP in Ubuntu. I don't know if it makes a difference, but my external IP is locked to my host's MAC address.

  Read the article

• internet connection problem related to a recurring registry error

  - by mats

  I have a Windows XP desktop system connected to the Internet via ethernet LAN. Initially, none of my browsers were connecting to the Internet, but I was able to update my antivirus software and all of my connection settings were perfect. I was able to solve the problem by running WinSock XP, which apparently fixes connection problems that have been caused by registry issues. My problem now is that every time I shut down the machine, the problem comes back (Internet browsers won't connect). Does anyone have any ideas/suggestions on this? Thanks

  Read the article

• Network connection through a wall

  - by BCS

  I have a place where I want to set up a network connection through a normal residential wall where I can't cut any holes. I don't want to just set up a wireless system. Does anyone make a device that you place on either side of a wall to hook up a connection? Preferably something that can do 100Mb full duplex and can't be eavesdropped on with common hardware? The situation is that I'm moving into a new place (that I'm renting, so I can't do any cutting) and the POP is in one room and I have all the equipment is in another room.

  Read the article

< Previous Page | 39 40 41 42 43 44 45 46 47 48 49 50  | Next Page >