Search Results

Search found 18580 results on 744 pages for 'wireless connection'.

Page 47/744 | < Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >

• Can't connect back to the wireless network after the password was changed

  - by 7777

  Family changed the network password and some other network settings after new computers were brought into the house because apparently they wouldn't work with what we had. Actually an off-site tech remotely changed it, and I have no idea what he did. My laptop detects the network (it shows up under available networks) but whenever I try to connect it says: Windows is unable to connect to the selected network. The network may no longer be in range. Please refresh the list of available networks, and try to connect again. I wish I could give more details, config settings, but frankly I have no idea what I'm looking for. This is XP (also, not a password issue, I know the password, it's just that I have no idea where to enter it, etc.)

  Read the article

• Wired and wireless network file sharing

  - by Megan

  I have connected my Internet to a buffalo air station router and a swtich. Computers and Laptops on this network connect to the Internet wired and wirelessly. I would like to share files locally on this network but I can't access the laptop's which connect wirelessly. I have shared folders on each computer but I would like to know if local file sharing is possible as all the computers utimately connect to the same router. All computers are running Windows 7.

  Read the article

• SSH connection times out unless I tunnel in from a different server-

  - by rm-vanda

  OK, so this just started last week - Whenever we try to connect to our server via ssh (we use sftp, as well) - The connection times out. However, when you ssh to any other server and then ssh into the machine - it works flawlessly. Now, the mindblowing thing is that sometimes the ssh connection will succeed. Moments ago, I tried it from another machine, and then my own, and it worked - only to time out the next go around. Last week, simply restarting the ssh daemon worked, but this week, no such luck. I even went in and changed: /etc/hosts.allow ALL : ALL and /etc/hosts.deny is blank. The firewall config hasn't changed - but I even disabled the firewall to see if that would work - It did, for a moment - before cutting off, again. (ufw is set to "ALLOW" not "LIMIT") When I try SSH'ing in from my phone -- it works, fine -- So, it seems the problem is with our ISP/router/gateway - However, I see no log in the router/gateway that says its blocking our connections - And that wouldn't explain why we can SSH into any other server -- except for this one - from our network --- I truly appreciate any insight that anyone may have on this matter -

  Read the article

• Redis connection issue

  - by mre

  We are currently experiencing a lot of Redis errors with the message Unable to connect: read error on connection, trying next server We run Redis on FreeBSD using PHP Redis and we have a hard time reproducing the error on Ubuntu so this might be a hint. There's a long-running issue on that topic on github. Basically we get a socket from the operating system with a call to connect(host, port, timeout) in phpredis, but when we do a select(db_index) afterwards, we get an exception. Could there be an issue with persistance? I assume that connect does nothing in the background and select tries to access the connection, which is actually closed. We don't run into a timeout. We tried tuning TIME_WAIT without success. Any other ideas on where the problem might come from? What is the best way to track the issue down? dtrace maybe? Update We are currently looking into our BGSAVE settings. Interestingly it takes half a second and more to create a fork for the process which regularly writes the data to disk (persistence) and maybe redis can't respond to connect() requests during that timespan.

  Read the article

• HP Wireless Printer not working

  - by Omri Spector

  I have installed an HP DeskJet 4620 driver on a win 7 machine. All works perfectly for several days, and than printing is not longer possible. Instead I get the message: "Unable to communicate with printer". This happened on every Win 7 PC I tried, and none of the HP/MS sites contain any relevant info... (Posting this so that the answer appears online, as I did solve it after much work) Solution: It appears that HP installation puts a unique "port" called "HP Network re-discovery". It stops working after some time (possibly after the first time the printer/pc enter sleep mode). BUT, the standard MS TCP port works just fine. So: Go to "Printers" Right click Printer Click "Printer properties" and then "Printer" or "Fax" (for both - do all this twice) Click "Add Port..." Select "Standard TCP Port" Fill in details Move printer to use the new port by un-checking the old one and checking the new one Happy printing.

  Read the article

• Windows 7 Won't connect to Wireless Router too far away (but still have 3 bars)

  - by Kerry

  I have found this problem a couple of times. Windows 7 with Intel AGN 5100 won't connect to a WPA2-PSK router when it's too far away. Both times I've had this happen I was in a foreign country (London and Stockholm), and both times I was upstairs while the router was downstairs. Now, it still has 2-3 bars when looking at local WiFi, but I get the "will not connect" error, and debugging doesn't help at all (it doesn't know what's wrong). I went downstairs and it connected immediately (but I need to be able to have it upstairs). My Android Cell Phone and iPad were able to connect upstairs just fine. Any suggestions?

  Read the article

• VPN Connection Causes Internal LAN Connection Loss with Server

  - by sleepisfortheweak

  I've tried configuring basic PPTP VPN at my small business using a number of different tutorials. As far as I can tell, the actual VPN connection worked fine, but upon connecting a client, the Server 'disappears' from the internal LAN. The RRAS service must be stopped before the connection is restored. My Setup: The network is simply a DSL Gateway/Router to the outside functioning as NAT/Firewall/DHCP. The server is a Win Server 2008 machine at fixed IP 192.168.1.200. The server has 1 NIC, so I used the 'custom' option when configuring RRAS. The RRAS settings should be default except that I've disabled ports for connection types I'm not using and reduced PPTP ports to 10. I've also created an address pool and disabled DHCP packet forwarding. The server only functions as a File Share and now a VPN Server. Local LAN computers all have mapped network shares to the server authenticated based on Local User/Group setup on the server. The Problem: The moment a client connects through VPN, the server 'disappears' from the local network. All mapped drives disconnect and there is no response to a ping 192.168.1.200. Even if the client disconnects, the server does not re-appear at that address until the RRAS service is stopped. I've Tried: Using an Address Pool inside and outside the local subnet. Using DCHP Relay Checking Inbound/Outbound filters (none enabled) The fact that nothing I've tried has had any effect, and that I can connect and successfully obtain an IP tells me that it's something more fundamental I'm missing. My gut tells me that it's something to do with the second IP address added by the VPN client somehow taking over the interface or traffic from the local LAN accidently getting routed to the VPN client instead of handled at the server once RRAS has become 'active' when a client connects. Hopefully this may be obvious to someone with real IT experience. I've been doing this a while and almost never been stumped. I'm starting to think it might actually be something tricky since my setup is pretty basic yet refuses to work. I'll be happy to include more info if this doesn't ring any bells right away for anyone. Thanks

  Read the article

• Wireless range extender throughput extremely slow.

  - by Alan B

  I've got a Belkin 54G router connected to the internet, and a Belkin range extender model F5D7132. I can get the range extender connected to the parent router SSID no problem, in repeater mode as opposed to access point mode. My Windows 7 laptop connects to the extender, which has a different SSID, and it connects with the full 5 bars. The issue is that when going through the extender internet performance is murderously slow, even getting the config pages of the extender or router is bad. When I connect directly to the router, all is well.

  Read the article

• Periodic internet connection drops

  - by user9647

  My setup is a dsl modem, and a dlink di 524M router. I'm also using a Witopia VPN which runs through OpenVPN. I've been having trouble with the internet connection dropping very frequently. It comes back shortly, without even a router/modem/computer restart. This happens as frequently as every ten minutes. Occasionally (not often) it will last as long as an hour or two without dropping. When it drops, I can get it back almost immediately by clicking Reconnect in the OpenVPN GUI and letting that do it's thing. It's worth noting that I'm in China. Calling support is a bit difficult because of that. Also I don't really understand all of the router's software, although I've got it generally figured out. I've tried a bunch of stuff, attempts to diagnose and/or fix the problem. No success with any of the following: I've power cycled both the modem and the router. I've tried an ethernet connection to the router. I've connected without the VPN. I've disabled IEEE authentication on all connections. I've checked for viruses. I've tried lifting it off the ground so as to prevent overheating.

  Read the article

• Server needs to ping outgoing before allowing connection

  - by QuintenVK

  Okay, first our setup: I'm currently working over VPN to a mac mini OSX 10.6 server. We have a testsetup VM running on that, using ubuntu 12.04. Earlier today, there was an outage because of which our mac mini server was reset. Since then, i was unable to initiate a connection to the VM (which i did boot) -- no ssh, no web, ... . I couldn't ssh or web from the mac mini to the vm either. I could do so from within the VM itself, though. Ping did work on all machines. Lastly, I tried pinging from the VM to my laptop. It took a moment, but then it finally started to ping (no timeouts or so). After that, web and ssh magically worked. I then didn't use the machine for about 5 minutes, after which i had to ping from the server to my laptop again before i could setup a connection. I'm in the dark on what this could be, though I think this is something to do with lookups.

  Read the article

• Automated VLAN creation with residential Wireless devices

  - by Zephyr Pellerin

  We've got a few WRT devices from Linksys here, and the issue has arisen to deploy them in a relatively small environment, However, in the interest of manageability we'd like to be able to automatically VLAN (ideally NOT subnet) every user from one another. It seems obvious to me that the default firmware isn't capable of this - can OpenWRT/Tomato/DD-WRT support any sort of functionality such that new users are automatically VLANed or otherwise logically separated from other users? It seems like there's an easy IPtables or PF solution here, but I've been wrong before. (If that seemed a little ambiguous, heres an example) User 1 sends DHCP request to server, new VLAN (We'll call VLAN 1) is created, user is placed in that VLAN. Then, user 2 sends a DHCP request and is placed in VLAN 2 etc. etc.

  Read the article

• Can't Ping - Wireless network of home

  - by Naunidh

  Hello, This may seem like other ping problem, but I have tried a lot before posting it here. I have a linksys WRT54G - firmware v8.00.8. I have two laptops one windows vista (192.168.1.99) and Windows Xp (192.168.1.13) connected on WiFi . The Router's IP address is 192.168.1.4, and default gateway is the ADSL modem (192.168.1.1) connected through wire. The problem is that laptops can not ping each other, they can ping the gateway and the linksys router, and both can access internet. Following has been tried (I am pinging from XP machine to Vista): I saw that arp entires for Vista machines were not being populated, so I added static ARP entries. 192.168.1.99 00-19-7e-70-d0-4e static I checked on ethereal that an ICMP packet for MAC address of Vista machine does go out from XP machine towards the Vista machine, but never reaches the Vista machine. So its get eaten by the Router? I added Vista machine to DMZ in my linksys router, so that all the ports are open (In case it was an issue). Firewalls , antivirus etc were turned off, echo was enabled explicitly on vista, file sharing, network discovery were turned on. Network type was set to private. Unchecked everything in Router;s firewall, even though they are only meant for WAN requests. Is there anything else that I should try. Thanks.

  Read the article

• windows 7 virtual wireless adapter keeps going to sleep

  - by conners

  Just a quick question that I can't see mentioned anywhere online. I have a Windows 7 box configured like these guys recommend http://www.itgeekdiary.com/windows-7-as-an-wi-fi-access-point/ simply so that I can have my Windows 7 box as a wifi access point or a wifi emitter. It's also called a Microsoft Virtual WiFi Miniport Adapter. But it powers off and shuts down automatically and stops working. Basically everything works as intended and then - well -it will stopped working when I am not at the Windows 7 PC for a long time. The problem seems to be that every time my PC goes to "power save / sleep" and in the morning the Windows 7 machine "wakes" but blooming heck the wifi has stopped and you have to power cycle the PC (which is very uncool). When I power Cycle I have to do the following as administrator C:\Windows\System32\netsh.exe wlan start hostednetwork I then tried a gazllion things involving services and power management and eventually discovered that if I run the following commands as administrator it will be ok (for a bit) but every 3rd ot 4th time I try this "trick" it simply fails. the trick that seems to work 3 out of 4 times (i.e. "most" of the time) C:\Windows\System32\netsh.exe wlan stop hostednetwork C:\Windows\System32\netsh.exe wlan start hostednetwork But why does this only work "some" of the time? What else I did by myself: on every manage adapter properties (that relates to the wifi) I right clicked [configure] [power management] /disabled/ "allow the computer to power off to save power" <- this made no difference Also (and this is a bit annoying) there is no system tray app/GUI for the Microsoft Virtual WiFi Miniport Adapter output signal ... none... so (lame as it sounds) the ONLY way I can check if it's on is to physically go to another device and SCAN.. lame so my question can probably be solved by any of the following: a) can I stop Windows 7 sleeping this wifi when the machine sleeps b) can I force Windows to force wake this process on wake? if so how? c) what is the service / process REALLY called and how do I restart it if it crashes d) how can I flush the wifi properly rather power cycle the host machine e) anyone have a link to an program or app that can sit in the system tray that shows windows 7 wifi hotspot emission status (on/off/etc etc) Since I am a programmer I can easily write a vbs script / windows exe to fix this (and I will share this solution) and the gui problem if I can work out the actual service that is running that netsh stops/starts

  Read the article

• Home Wifi: wireless laptop cannot RDC to wired desktop (both windows 7)

  - by James_Smith

  Hi, Both laptop and desktop are connected to same wifi router. desktop is connected through wire and laptop is on wifi. Both Pcs are running windows 7 and can ping each other and are in same workgroup. When I try to RDC my desktop on my laptop, it connects to the desktop and shows the windows credentials screen. An admin user (J) with same password exists on both PCs. But it gives an error "the user name or password is incorrect" However when I RDC the laptop FROM desktop using the above steps..it works perfectly wel! The same credentials issue comes with Shared folders. What am I doing wrong?

  Read the article

• Outdoor WiFi Mesh Topology vs. Repeaters

  - by IronJaxor

  Here's the current configuration in our organization (which I believe is incorrect): We have a number of Cisco 1500 series AP's (22 in total), that are mounted outdoors to provide seamless WiFi coverage over a large area. Each AP however has its own physical ethernet connection back to the WLC (All the AP's are marked as Root AP's). They are all broadcasting the same SSID. We have tried to stagger the channel selection but because there are only three non-overlapping channels to choose from, and in some areas the density of AP's is quite high, there is multiple places of channel interference. With this configuration we experience 100-150 disconnects from clients every day. (Our clients are mobile so they move throughout the coverage area constantly). My idea is to switch the AP's to the same channel thereby forming a wireless mesh, use the built in functionality of the 1500 series to use 802.11a as the backhaul, designate one or two AP's as root AP's and wire them back to the WLC. Thereby forming a WiFi mesh, which if I'm not mistaken is the point of the 1500 series in the first place! I am however completely new at WiFi networks and wondering if I am simply mistaken in what I believe my proposed changes will enable, or if there is a better way to tackle the WiFi topology.

  Read the article

• why would resetting the Netgear N300 router fix my Win 7 laptop's slow wifi?

  - by rjnagle

  In the past day the wifi download speeds of my Win 7 HP 64 bit laptop have slowed considerably. I am trying to troubleshoot the problem and to figure out whether it's hardware related (i.e., is the Intel(R) Centrino(R) Wireless-N 2230 the problem?) or router related. I have a Netgear N300 router connected to my modem. I'm using Speedtest to measure my speed. First, during my problem state, my ipad can download and upload at normal speeds. It's only my Win 7 laptop which is having problems. Because my ipad downloads at normal speeds, that would tell me that the problem is specific to the laptop (either HW or SW). But when I restarted my Netgear router, the laptop wifi problems disappeared. That just doesn't make sense. If we know that one device can connect properly to the router, why would a laptop have problems? What are some possible reasons why this might happen? Also, during my problem state, I noticed that on my laptop upload speeds were faster than my download speeds. Anybody have a guess about what might cause upload speeds on one device to be faster than another? Is there any actions i could take (or options to enable) so this problem won't occur. (I initially thought my problem might be software related or memory related -- Norton AV or browser plugins. But even after I disabled everything and made sure memory footprint was minimal, the slowdown was still occurring -- and it solved itself altogether when the router was reset).

  Read the article

• Internet connection very slow after Linksys configuration

  - by NLV

  Hello We have this network setup Server1 - DHCP server, Domain Controller, AD Lease line for Internet connection From lease line to Linksys router (we dont use wireless though) From linksys to Netgear (24 port Switch) and vonage (VoIP) Netgear to all our machines We configured Linsys with the static IP and DNS server addresses our ISP gave and we have routed it correctly. All our work machines are configured with Get IP automatically DNS server addresses our ISP gave The problem is that none of the sites are getting opened promptly. It is taking around 5 minutes to load google.com. But we are able to ping all the sites. What could be the problem?

  Read the article

• Planning home network

  - by gakhov

  I'm planning to setup my home network from scratch and want to ask professional opinions or tips. My home is connected to Internet with a cable connection (100 Mb/s). The devices I would like to connect are VoIP phone (RJ-45), TV (WiFi/LAN), 3 laptops (WiFi), 2 smartphones (WiFi), an iPad (WiFi), a Kindle (WiFi), a network printer and, probably, a home media storage (WiFi/LAN). As you can see, the most load will be on WiFi connections (probably, even if TV supports WiFi it's better to connect it by LAN?). So, I need help to choose the best router (or combination of routers) to support stable connections for all these devices and minimize the total number of routers/adapters. I like how Cisco/Linksys devices were working for me in the past, so preferably (but not obligatorily) I want to setup network with their solutions. Any thoughts?

  Read the article

• How to disable internet access at night on the router?

  - by izb

  I have an internet connection that I'd like to be enabled only during the day. With multiple household internet devices, this would need to be something disabled at the level of the router. I don't believe the router offers this sort of functionality, but I'm reasonably familiar with setting up web servers and the like, and I'm wondering if I can set up some sort of proxy server on the internet that the router must go through and have that proxy only active at certain times of day. It's a bit vague I know, but is something like this even possible? If not, are there other solutions to the problem?

  Read the article

• Remote location looses connectivity

  - by user24559

  I have a remote location that has constant internet access using DSL. The remote location only has three Linksys cameras that use the internet access with a router. There is no computer on the network. The router is configured to use the DYN.org service to keep the IP address updated if the internet provider assigns a new ip address. The problem I am having is the router after a period of time stops responding to incoming ping requests and the cameras are shown offline. However, if I keep one of the cameras constantly streaming data then the connection to all the cameras works just fine all the time. How can I keep the router from appearing to be sleeping and not responding to incoming requests? The router is the Linksys WRT300N.

  Read the article

• My D-Link Router is only allowing one connection

  - by Blaze

  My Router (Model: DI-624) is only allowing one wireless connection to one laptop. The other laptop is stuck hanging at connecting to the Internet I have the SSID set as "Pedro-Home" and is using a WPA PSK secured password. I have set the router using "Blaze-PC" while wired. Both Laptops critically need the Internet. > Dynamic DHCP Client List > > Host Name IP Address MAC > Address Expired Time > Blaze-PC 192.168.0.100 70-f1-a1-ff-39-a8 Apr/21/2011 17:49:14 > pedro 192.168.0.105 00-26-82-c8-47-25 Apr/21/2011 17:50:05 <<This computer isn't connecting.

  Read the article

• Windows 8 doesn't automatically join Wi-Fi network if Ethernet connection is active

  - by Herb Caudill

  In Windows 7, my laptop would automatically join both an Ethernet network and the Wi-Fi network in my house (both going through the same router). In Windows 8, if the Ethernet connection is present, it doesn't join the Wi-Fi network at all. The reason I noticed this is that if Wi-Fi isn't active, I don't see my AirPlay speakers. My wireless printer is also unavailable until I manually connect to Wi-Fi. To recap: When I turn on my computer and it's connected to Ethernet, this is what my Network Connections control panel looks like: After I manually join my Wi-Fi network, it looks like this: I would prefer for it to join both networks automatically on startup, the way it did in Windows 7. Is there a way to make this happen?

  Read the article

• Is WEP used in conjunction with a wireless access list adequate security?

  - by LeopardSkinPillBoxHat

  I use a Netgear wireless router, with various wireless devices connecting to it. One of my wireless devices doesn't support WPA2 security, so I had to downgrade the security on the router to WEP. We all know WEP is broken, so as an added measure I enabled a wireless access list on the router so that only devices with specified MAC addresses which are in my access list are permitted to connect to the router. I know it is possible to spoof a MAC address from a device for the purposes of accessing a secure network like this. But is it easy? Is using WEP and a wireless access list good enough to prevent most hacking attacks? Or should I do whatever I can to ensure all devices support WPA2 in the future?

  Read the article

• Slow Internet connection

  - by Muthu Kumaran P

  My internet connectivity from my Laptop slowed down overnight. I have no clue as what had happened. I was able to download at 300kbps the day before yesterday. And from yesterday on, my internet has been slow. My download speed is at 25kbps. Can someone help me to resolve this issue? I am using wireless connection on my Sony Vaio. I am not sure what else info I need to give as this is my first time to post a question here..

  Read the article

• Can my ISP find out if my wireless is protected or not?

  - by Zakukashi

  Im just wondering how much my ISP knows about my activities. I have a Modem from them this modem then connects to a SITCOM wireless router which then leads to MY PC's, Phones, Laptops. I really need to know if my ISP knows if my router is in unprotected state of wireless or not. The Sitcom box it not theirs, we payed for it long after getting this internet. Does my Sitcom wireless router send data to my ISP on its own, indicating delicate information such as wireless protection on or off? Or does the ISP's modem fish out this information on its own since our wireless router is connected to it? Would greatly appreciate any answer.

  Read the article

< Previous Page | 43 44 45 46 47 48 49 50 51 52 53 54  | Next Page >