Search Results

Search found 16894 results on 676 pages for 'block device'.

Page 430/676 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Keyboard/Mouse not working when windows vista has reached login screen

  - by Jonas

  I currently have a problem with a system (vista home premium, 64bit). USB kbd/mouse will not work when windows has booted/loaded their drivers and Im stuck at the login screen with no working input devices. None of the available boot options after F8 will boot to working kbd/mouse. They work in the bios setup and they seem powered all the way until a few seconds before the login screen. Legacy USB devices is also enabled in the bios. They also work with the recovery dvd, but I am unable to start the device manager to check or uninstall the mouse/kbd drivers. Cant get devmgmt.msc nor devmgr.dll (with rundll32) to work. System repair does not detect the problem and there are no available restore points (it was disabled). Any ideas?

  Read the article

• Excluding four IP's from a /32 static route

  - by Justin

  I have a Cisco ASA routing a /32 of public addresses (non RFC-1812) through a private link. When the device sees the destination address it selects the private route instead of going out over the public network. This works great but I am now trying to exclude 4 IP's from the private route. Traffic to these addresses should go over the public internet instead of being routed over the private network. Can I just add anothe route for these four IP's or do I have to modify the existing route for the /32?

  Read the article

• iptables to allow input and output traffic to and from web server only

  - by Caedmon

  I have an Elastic Search server which seems to have been exploited (it's being used for a DDoS attack having had NO firewall for about a month). As a temporary measure while I create a new one I was hoping to block all traffic to and from the server which wasn't coming from or going to our web server. Will these iptables rules achieve this: iptables -I INPUT \! --src 1.2.3.4 -m tcp -p tcp --dport 9200 -j DROP iptables -P FORWARD \! --src 1.2.3.4 DROP iptables -P OUTPUT \! --src 1.2.3.4 DROP The first rule is tried and tested but obviously wasn't preventing traffic coming from my server to other IP addresses so I was hoping I could add the second two rules to full secure it.

  Read the article

• What does the NTFS encryption protect against?

  - by Ray

  I have encrypted a folder from the (PropertiesAdvancedEncrypt contents to secure data). However when I change my user profile to another one which is also an administrator the folder seems to be accessible as if nothing happened. What exactly does this encryption protect against. I'm looking to encrypt folders that no other user, or another OS or even if the HDD were to be removed and plugged to another device will be accessible. My OS is Windows 7 Ultimate. Any suggestions?

  Read the article

• What protocols will/are ISPs use for IPv6 deployment?

  - by rbeede

  Currently ISPs deal out addresses via DHCP for IPv4 dynamic (single) addresses. What protocol will/are ISPs going to use for IPv6 when they can hand a customer an entire /64 (or /48 if they are nice) block? DHCPv6, RA? For ISPs that support true end-to-end IPv6 will they provide gateway devices (similar to cable modem or true DSL bridges for example) that receive border information for that specific customer? I'm just trying to get an idea of how your common residential service customer will have to configure things in an IPv6 Internet (whenever that comes). Will it be something customers are expected to statically configure on their home wireless router? Today with IPv4 I do it like this: Modem (bridge) passes public IPv4 obtained via DHCPv4 from ISP to second device (wireless router). It in turn has its own DHCPv4 service it provides on the internal lan.

  Read the article

• Vostro 1520 crash during bios update

  - by Deadmilkman

  My Vostro 1520 (P8700 C2D) originally came with BIOS A02. This bios version have known problems with VT, so I had to upgrade to A05. During the upgrade, the notebook crashed. Needless to say, it won't boot anymore. The simple question is: is there a way to access the bios boot block to recover the bad flash with a crisis disk? I know that the MINI and the ALIENWARE models have this feature, but I can't seem to find anything about it in the Vostro machines. Any help will be much appreciated. PS: Dell's solution is to change the motherboard, but it will take several days, as the board isn't available in my country :( Regards, Deadmilkman

  Read the article

• Windows 8.1 wants to format a USB stick with an unusual but valid GPT partitioning scheme, why?

  - by DonGar

  I have a USB stick formatted with GPT partitions. Some of the partitions are ext2, some are ext4, some are custom and funky. However, there is also a standard EFI partition, and a standard vfat partition. In Windows 7, both the EFI partition and the standard VFAT partition are visible and mount normally. But Windows 8.1 prompts to reformat the drive when it's inserted. I'm not surprised if Win 8 hides the EFI partition, but I didn't expect it to prompt for reformatting. I want to leave existing partitions alone, but have a VFAT partition that Windows 7, 8, and 8.1 will mount and display normally. Exactly how does Win 8 decide if a device needs to be formatted?

  Read the article

• Unable to read DVD on laptop

  - by usabilitest

  I have a DVD disk that I created on an HP laptop. I believe it was setup to be accessed as a USB device. I do not have that laptop any longer and I still would like to access the files on that DVD from my current DELL laptop but it can not open the disk. My guess, the session nwas not closed on the disk and for some reason the new laptop can not read it. My question is, is there any way I can access the files using new laptop, of do I need to find similar HP to try to access the files and possibly close the session? Are there any utilities out there that could help me? Thanks.

  Read the article

• Eclipse style autohotkey commands

  - by Ph4g3

  Is autohotkey capable of interpreting hotkeys in the style of Ctrl + Shift + W, W? I would assume a script like the following would work: ^+W:: ; Windows hotkeys (Ctrl + Shift + W) O:: Run Outlook ; Subsequent 'o' pressed => Run outlook E:: Run Explorer ; return From the documentation I note that these are called vertically stacked hotkeys and cause each line to perform the same action. In the case above, I think Ctrl+Shift+W and o will both cause outlook to be launched, whereas pressing e would cause explorer to be launched. What I would like is Ctrl+Shift+W, O runs outlook and Ctrl+Shift+W, e runs windows explorer. Is there any way to cause a hotkey to perform context specific actions (much like in Eclipse), where I can press Ctrl+Shift+W to activate a block of specific hotkeys?

  Read the article

• Why my USB mouse get suspended after 3 seconds of inactivity?

  - by Vi.

  Mouse's bottom LED goes off after 3 seconds after connection and cursor movements and wheel stops. Pressing any button, reconnecting or resetting USB device resumes it for another 3 seconds (when resumed by pressing button, this event does no go to X). This happens when using any of USB ports. This mouse works well with other computer with Linux. It was working well before. Why can it happen? How to fix it? Update: It happens only if laptop is on battery. Answer: this is caused by powersaving done by laptop-mode-tools. To temporary turn off powersaving one can use for i in /sys/bus/usb/devices/*/power/control; do echo on > $i; done

  Read the article

• Is there any IP which refers to the internet?

  - by victorferreira

  Hello, guys, good morning. 127.0.0.1 is the local IP, isnt it? Is there a IP that I can use in order to refer to the any user in the internet? The thing is: i want to block a specific file to be accessed by the internet using IIS6. but i doesnt show me a clear way to do this. But i can define some security rules, for example: give IP restrictions for some file. So, i can deny for everybody (using that IP i am asking about) and allow for the internal IP. any suggestions?

  Read the article

• /etc/hosts in Windows 8.1 doesnt work like in Windows 7 [on hold]

  - by user225438

  Last time when i installed Win7, i configured it to block some netbios names in LAN with hosts file. Something like this: 192.168.0.10 computer_name 192.168.0.10 computer_IP where 192.168.0.10 some ip-address in network, where user need to login to access it. So, when user trying to access computer_name via \\computer_name, he will redirect to 192.168.0.10 rather then going to computer_name. In Windows 8.1 I can't do this trick. I tried to disable Windows Defender, flushed DNS, nbtstat -R. Nothing works. When I pinging computer_name, IP address returning 192.168.0.10, but when I accessing it via explorer (\\computer_name\d$), it opening computer partitions. In Win7, when I trying to access \\computer_name, its trying to open 192.168.0.10 one. Maybe its not the best solution to do this, but it works in Windows 7.

  Read the article

• Windows 8 will only recognize the Blu Ray ROM, if the install disk is present at boot time [migrated]

  - by aceinthehole

  If I have the install disk in the blu ray ROM drive at boot time and subsequently remove the disk and replace it with blu ray media everything functions as I'd expect. However, if I have no media present, or another disk in the drive at boot time, then windows 8 does not seem to recognize that the blu ray player is even present in the computer. It is not present in the 'my computer' screen, device manager does not show the player, and scanning for new hardware yields nothing. It seems that the driver is installed and working as expect, what is it about having the windows 8 install disk in the drive or not that would cause this kind of behavior?

  Read the article

• Managing multiple ssh keys

  - by Mathijs Kwik

  I have a lot of ssh keys, they are all passphrase protected and managed by ssh-agent. As a result of this, I am now getting "Too many authentication failures" on some connections. As has been explained on this site before, this is because ssh will try all keys the agent throws at it. The proposed solution is to use IdentitiesOnly in the config, together with an IdentityFile. While this indeed stops offering wrong keys, it seems it completely disables the agent in full, so now I have to type the passphrase on every connection. I could not find clear info about this. Does IdentitiesOnly just disable getting keys from ssh-agent in full? Or should it just block out the keys that aren't mentioned? Thanks, Mathijs # here's my config ~% cat .ssh/config Host bluemote HostName some.host.com IdentitiesOnly yes IdentityFile /home/mathijs/.ssh/keys/bluebook_ecdsa # I had the key loaded into the agent, shown here ~% ssh-add -L ecdsa-sha2-nistp521 SOME_LONG_BASE64_NUMBER== /home/mathijs/.ssh/keys/bluebook_ecdsa # but it doesn't seem to get used ~% ssh bluemote Enter passphrase for key '/home/mathijs/.ssh/keys/bluebook_ecdsa':

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• How to get audio driver for compaq c700 ?

  - by Leena

  Hi, Initially i have audio driver and its works fine.But some times speaker was clear.So one of my friend installed some audio driver,after that totally disabled the volume. For that reason, i also tried to get audio driver and installed many times.Now i don't know many drivers .inf in my laptop.from device manager i have deleted the audio driver's,below i have attached the screen shot yours kind reference. Please help me to get audio drivers.First, i need to remove the unwanted drivers .inf files from laptop then i have to install the new audio driver. Experts,please suggest me to get audio driver without reinstall the OS. Details: Compaq c700 (i don't know model number) windows xp sp2 p/n : KT188PA#ACJ I appreciate your help.

  Read the article

• Windows 7 - all usb devices go to sleep im idle mode

  - by dvdx

  A strange thing happened after a few updates to the system: Intel rapid storage SSD firmware update Intel Ethernet adapter update GPU Intel update When the computer turns off the screen (after 5 min), an unknown time later, all the USB devices stop working. Sound card Mouse Keybord etc. I can't turn them back on, so I can't wake up the screen or do anything except turn the computer off and back on. I checked my power save profile and all is OK there. I changed in the Device Manager, the Allow USB to sleep in all the hubs. How can I fix this??

  Read the article

• Download resume support blocked by isp?

  - by John Doe

  Can ISP block resume support for downloads ? I'm using IDM (internet download manager) to download of the internet from resume supported websites, yet I am unable to resume downloads. I tried different computers with the same result. Turned off firewall, didn't have any effect i was able to download with no issues until a couple of days ago. Another thing i noticed is that before IDM used to try to connect to several connections to speed up my download, but now it can only connect to one connection. Also i tried to download using my vpn, and i was able to download and resume downloads with no problem.

  Read the article

• SMTP 25 blocked externally

  - by Jeff

  not sure how to title this question... we run an exchange server with around 80 internal users, all outgoing mail is relayed off a smart host (ISP smtp server) so nothing is actually sent to the world via our server. i wanted to check the server, locally i can telnet to port 25 with no issues and receive the esmtp service ready reply. whenever i do it from an external address (off our local network) i receive unable to connect error 10060. can this cause problems with SPF records, and reverse DNS ? should my exchange server be able to accept smtp requests, requiring authentication before i am able to send from external addresses? if so how... also the exchange server is behind a NAT (asa) device, more than likely thinking that the nat is not configured to route the smtp 25 request to the exchange server.. thanks

  Read the article

• How to configure linux routing/filtering to send packets out one interface, over a bridge and into another interface on the same box

  - by rj75

  I'm trying to test a ethernet bridging device. I have multiple ethernet ports on a linux box. I would like to send packets out one interface, say eth0 with IP 192.168.1.1, to another interface, say eth1 with IP 192.168.1.2, on the same subnet. I realize that normally you don't configure two interfaces on the same subnet, and if you do the kernel routes directly to each interface, rather than over the wire. How can I override this behavior, so that traffic to 192.168.1.2 goes out the 192.168.1.1 interface, and visa-versa? Thanks in advance!

  Read the article

• I don't have a free PCI / PCI-e slot, can it be worked around?

  - by Borek

  I need to add a PCI(e) card to a nettop PC that is so small that the card won't fit there (and there is no external alternative like we're used to with external TV tuners). The only ports available are USB and eSATA, is it possible to somehow "dock" the PCI card into some device that would then connect to the PC via USB or eSATA? Or am I out of luck? (I don't mind the solution being visually ugly, I wouldn't even mind opening up the case and soldering some wires in, anything that would work would be great.)

  Read the article

• Gigabit connection between 2 computers

  - by Alecu

  I am trying to set up a connection between 2 pc's. It's a direct cable connection. The problem that I am having is that the connection isn't gigabit. I know both network cards support gigabit. I checked in the device settings and in one pc I can see in the Speed & Duplex the 1Gbps option but on the other pc I can't see that option despite the fact that the network card is gigabit. I have quite some files to copy from one pc onto another and I really need a good connection between them. I can't really remove the hard drive because it would void the warranty. Could this be a driver issue or a cable issue? On both pc's I have windows 8. The network card on the pc that doesn't have the 1 gbps option is an Atheros ar8161 card.

  Read the article

• Warning popups that direct to 3rd party sites

  - by Kingamoon

  Lately, I've been getting warning popups on my browser (latest version of Chromium) that notify me that my Java version of current browser is outdated and needs to be updated. What's alarming to me is that it sends me to some sites I've never heard of like Malest.com. When I block a site, it redirects me to a different one. I don't know how to track what's causing these alerts. I ran Microsoft Security Essential and it found nothing. Any suggestions on what to do to nail down this irritating problem?

  Read the article

• make a computer recognized as a usb flash drive?

  - by user137560

  Is there anyway to make a folder or a partition on a computer (Linux/windows) to act like a flash drive to other computers or devices when connected with a usb cable. For example, I have a windows 7 computer with 2 partitions c and d, then connect that computer to another computer or a smart TV using a USB cable (has to be male to male USB cable) then the other computer or TV recognizes the current computer as a usb device. Is that possible, if not is there any usb switch to connect an external hard drive or flash drive to both the computer and TV without the need to manually switch them (I know about some USB switches but they only support automatic switching with some certain types of printers, not with mass storage) Thanks in advanced! Sam

  Read the article

• Acer Aspire 7750-6801 windows 7 Home Premium x64 not charging properly [closed]

  - by MaurerPower

  I have an Acer Aspire 7750-6801 laptop running Windows 7 Home Premium 64 bit OS. The issue is that it will only charge sometimes when plugged in. I thought it might be a hardware issue, so I tried charging with the laptop off, and it works fine. Also when in Linux, or any other environment other than Windows, it also charges fine. The intermittent charging issue ONLY presents itself when in Windows. I've tried the following: Open Device Manager Under 'Batteries->', I uninstalled 'Microsoft ACPI-Compliant Control Method Battery' Then re-installed using 'Scan for hardware changes' Still no luck. It's quite urgent, any help would be appreciated as I am totally at a loss...

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >