Search Results

Search found 16113 results on 645 pages for 'cross domain'.

Page 430/645 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Developing an Interface to a Dynamic System

  - by radix07

  I work for a small company and have been designing a GUI to interface our embedded system. The problem with this embedded system is that it is not a finished product (may never be) and is constantly under development and being tweaked and updated for different customers and applications in small volumes. So to deal with this I made a program that can export all the data from a spreadsheet where most of the embedded system variables are sourced from and throw them into a small database for the GUI application to use. This database program I made also spits out a cross reference file for the embedded system which allows the GUI to look up all the variables. This system works pretty well so far, and is even integrated with version control among the GUI, database, and embedded system. The big problem is that there is constant development on several projects that use this system and it gets terribly tedious to keep the system up to date and bring in new changes. This has gotten to the point to where I have had to code the GUI to dynamically (generically) generate all interfaces since I am never guaranteed to find the same data the same way. I have not been able to come up with a good way to uniquely identify the data I import from excel since all fields are able to be changed (due to engineering stubbornness, code re-factoring and/or excel issues) and I cannot assign a fixed reference within the sheet itself. So, are there any good methods or ideas on how to handle the chaos?

  Read the article

• Problem with gluOrtho2D()

  - by Shashwat

  I was trying to understand the gluOrtho2D function. I have drawn 4 lines originating from the center reaching up to 4 corners of the screen. You can follow the below code. osize is a variable which is used to set the parameters of gluOrtho2D. It will create a window of size 2*osize. If works fine when osize is 1. Lines reach the corners. But as I increase the value of osize, the length of the lines decreases (cross becomes smaller and does not cover the whole screen). But I think it should reach the corner. void display() { glClear( GL_COLOR_BUFFER_BIT ); //glViewport(0, 0, 100, 100); glMatrixMode (GL_PROJECTION); float osize = 1.2; //glOrtho(-osize*1.0, osize*1.0, osize*1.0, -osize*1.0, -1.0, 1.0); gluOrtho2D(-osize*1.0, osize*1.0, osize*1.0, -osize*1.0); glMatrixMode (GL_MODELVIEW); glBegin(GL_LINES); glColor3f(0.0, 0.0, 1.0); glVertex2f(0.0, 0.0); glVertex2f(-osize*1.0, -osize*1.0); glVertex2f(0.0, 0.0); glVertex2f(-osize*1.0, osize*1.0); glVertex2f(0.0, 0.0); glVertex2f(osize*1.0, -osize*1.0); glVertex2f(0.0, 0.0); glVertex2f(osize*1.0, osize*1.0); glEnd(); glutSwapBuffers(); //includes glFlush(); } What is the problem?

  Read the article

• Spend Analytics on a Grand Scale

  - by jacqueline.coolidge(at)oracle.com

  The Wall St. Journal reports in Billions in Bloat Uncovered in Beltway that a recent study by Government Accountability Office (GAO) has released a massive study of several programs and agencies that cost U.S. taxpayers billions of dollars each year.  This report help save $100 to $200 Billion dollars by identifying duplicate spending and ineffective programs that can be consolidated or eliminated. Now, that is spend analytics on a massive scale! It remains to be seen how actionable that information will be.  Certainly, there have been studies before that identify wasteful spending.  But, it’s a great case of the power of business intelligence and spend analytics.   Many companies do find significant savings when they implement spend and procurement analytics. What makes for an excellent spend analysis? It should be: Objective and provide visibility across programs and/or divisions A cross functional analysis that links financial with performance metrics Prescriptive and actionable Spend and procurement analytics have been HOT during the economic downturn! I expect 2011 will see many more companies get serious about spend analytics and would love to hear from companies who are willing to share their experience.

  Read the article

• Determining whether two fast moving objects should be submitted for a collision check

  - by dreta

  I have a basic 2D physics engine running. It's pretty much a particle engine, just uses basic shapes like AABBs and circles, so no rotation is possible. I have CCD implemented that can give accurate TOI for two fast moving objects and everything is working smoothly. My issue now is that i can't figure out how to determine whether two fast moving objects should even be checked against each other in the first place. I'm using a quad tree for spacial partitioning and for each fast moving object, i check it against objects in each cell that it passes. This works fine for determining collision with static geometry, but it means that any other fast moving object that could collide with it, but isn't in any of the cells that are checked, is never considered. The only solution to this i can think of is to either have the cells large enough and cross fingers that this is enough, or to implement some sort of a brute force algorithm. Is there a proper way of dealing with this, maybe somebody solved this issue in an efficient manner. Or maybe there's a better way of partitioning space that accounts for this?

  Read the article

• How do web servers enforce the same-origin policy?

  - by BBnyc

  I'm diving deeper into developing RESTful APIs and have so far worked with a few different frameworks to achieve this. Of course I've run into the same-origin policy, and now I'm wondering how web servers (rather than web browsers) enforce it. From what I understand, some enforcing seems to happen on the browser's end (e.g., honoring a Access-Control-Allow-Origin header received from a server). But what about the server? For example, let's say a web server is hosting a Javascript web app that accesses an API, also hosted on that server. I assume that server would enforce the same-origin policy --- so that only the javascript that is hosted on that server would be allowed to access the API. This would prevent someone else from writing a javascript client for that API and hosting it on another site, right? So how would a web server be able to stop a malicious client that would try to make AJAX requests to its api endpoints while claiming to be running javascript that originated from that same web server? What's the way most popular servers (Apache, nginx) protect against this kind of attack? Or is my understanding of this somehow off the mark? Or is the cross-origin policy only enforced on the client end?

  Read the article

• what will EcmaScript 6 bring to the table for us

  - by user697296

  Our company ported moderate chunks of business logic to JavaScript. We compile the code with a minifier, which further improves performance. Since the language is dynamically typed, it lends itself well to obfuscation, which occurs as a byproduct of minification. We went to great efforts to ensure it positively screams, performance-wise. We can now do what we did before, faster, better, with less code, on more platforms. In summary, we are very satisfied with the current state of the language. I personally love the language especially for its cross-platform nature. So naturally, I read up a lot about the state of JavaScript compilers, performance and compatibility across as many browsers and platforms as I have time to research. The one theme which has been growing louder and louder these days, is the news about ECMAScript 6. So far, what I have been able to gather is that ES6 promises a better development experience; firstly by enabling new ways to do things, secondly by reporting errors early. This sounds great for those who are still waiting for the language to meet their needs before jumping on board. But we have already jumped on board in a big way. Sure, I expect that we will have to do ongoing maintenance and feature revisions on our code through the years, and that we would obviously make use of best practices at the time. But I don't see us refactoring major portions of it to take advantage of language features that are mostly intended to boost developer productivity. I keep wondering, what impact will the language advances ultimately have on our existing, well-written, well-performing code base? Is there something I am missing? Is there something we ought to look out for? Does anyone have tips or guidance on how we should approach the ecmascript.next finalization? Should we care?

  Read the article

• What could cause a sudden stop in Box2D?

  - by alexanderpine

  I'm using Box2d for a game, and I have a bug that's driving me nuts. I've simplified the situation down to a square player sliding back and forth frictionlessly on top of a floor composed of a series of square tiles, driven by the left and right keys (which apply a horizontal force). Works great, sliding back and forth across the whole floor. Except... Every once in a while, the player will suddenly stick at the edge of one of the tiles as if it is hitting a (nonexistent) wall. Further pushes in the same direction it was traveling will fail, but as soon as I push backwards once in the opposite direction, I can push forwards past the sticking point again. The sticking point seems to be random, except for being on the edge of a tile. Happens while going left or right. For debugging purposes, I keep the Positions/velocity values for the previous two update ticks and print them out when this stop occurs. As an example, here you see the player moving right, decelerating slightly; pos2 should be about 8.7, but it stops dead instead. tick0: pos= 8.4636 vel= 7.1875 tick1: pos= 8.5816 vel= 7.0833 tick2: pos= 8.5816 vel= 0.0000 So, as the player is 0.8 and the tiles 1.0 wide, the player is stopping just as it is about to cross onto the next tile (8.5816 + 0.8/2 = 8.9816). In fact, I get a collision message (which I ignore except noting that it happened). It only seems to happen at x.5816 (or -x.4184) while moving right, and x.4167 (or -x.5833) while moving left I said that it's like hitting a wall, but in fact, when it hits a wall, the numbers look more like: tick0: pos0= 12.4131 vel2= 8.4375 tick1: pos1= 12.5555 vel1= 8.5417 tick2: pos2= 12.5850 vel0= 0.0000 so it moves further right on the last tick, which puts it in contact with the wall. Anyone seen anything like this. Any suggestion on how I could be causing this behavior.

  Read the article

• jQuery - upgrade from version 1.6.x to 1.7

  - by Renso

  Goal: Issues to consider when upgrading from jQuery version 1.6 to 1.7. This is a short list and may help identify the real issues you need to concern yourself with in stead of reading through all the release notesSummary of issues encountered during upgrade:As you prepare for upgrade to jQuery 1.7 from 1.6.x, this is a quick glimpse of all the issues that are relevant, not sure if it covers all but may be all you need to worry about.Use this method only for checking checkboxes and radio buttons:$("input:checked")http://api.jquery.com/checked-selector/This will work regardless of the version of jQuery you are using. Note that $("input).attr("checked") returns true prior to jQuery 1.6. Only retrieve "real" attributes with "attr", in order versions it would also retrieve properties like "tagName", this no longer works with jQuery 1.6.1+Why does $("input").attr("checked") no longer (from version 1.6.1+) return TRUE or FALSE, because if you look at the HTML (as well as W3C spec) it does not contain a true/false, but the value checked="checked", which is what it should have returned in the first place. $("input").prop("checked") works, return true, because there is in fact a DOM property for "checked" with the value being "true" or "false".Furthermore, if you want to upgrade to jQuery 1.7 you should only have to worry about this for most part:1. isNumeric() is new, be careful as the older version jQuery.isNaN() has been deprecated2. jqXHR success and error have been deprecated3. When rendering content with text(), white space issue cross-browsers: http://bugs.jquery.com/ticket/3144Other than the issues above I am not aware of any deprecations you need to worry about.Hope this helps to get everyone up to version 1.7

  Read the article

• Game Development

  - by Sundareswaran Senthilvel

  I'm planning to write a game from scratch (a BIG Game, for commercial purpose). I'm aware that there are certain compute libraries like OpenCL, AMD APP SDK, C++ AMP as well as DirectCompute - both from MS (NOT interested in CUDA) are available in the market. I'm planning to write the game from the scratch, which includes the following engines... 1.Physics Engine 2.AI Engine 3.Main Game Engine (... and if anything is missed). I'm aware that, there are some free physics engine libraries in the market. Not sure about free AI engine libraries. I'm bit confused in choosing between the OpenCL, AMD APP SDK, and C++ AMP libraries (as already mentioned i'm NOT interested in CUDA). I want my game to be published in Windows/Android/Mac OSX. It means it should be a cross-platform game. I will be having "one source code" that i'll compile for various platforms like Windows/Android/Mac OSX, and any others if i missed. Note: Since I'm NOT a Java guy, kindly do NOT suggest me the Java Language. For Graphics language should i use OpenGL or DirectX 11? I have heard that OpenGL runs on a single core, and not sure of DirectX 11. Between OpenGL and DirectX which one should i follow? or else, are there any other graphics language that i need to start with? I want to make use of the parallelism in GPU as well as CPU.

  Read the article

• Which field of programming is known as the best practice for Java? [closed]

  - by user1276509

  I'm a CS student and I have some programming background such as PHP, JavaScript and Pascal. Since Java is so popular among local companies and Java is known as market skill, I'm going to learn it. But I don't know in which field I can use it. So I wonder, what can I do with Java? I heard that Java is not good for web development, although there is Play! Framework. I know a lot of people who prefer to use Python, Ruby and PHP for web development instead of Java and its Play. I also heard that Java is not good to write destkop applications, although it's cross-platform. Many programmers prefer C# for destkop. So I see there's only one field which I can use Java for it - is Android development. But I'm not interested in mobile application development. So my question is which field of programming is known as the best practice for Java? Thanks in advance.

  Read the article

• Massive Affiliate Shopping Platform. Is WordPress really suitable? [closed]

  - by SPI

  I am working on an online shopping platform that acquires it's data from various affiliate programs through XML files. I am talking hundreds and thousands of items per program here that change often if they go out of stock. My clients choice of CMS was WordPress. I am guessing he assumed the user friendly interface would make life easy for him. However, the fact that he hired me to parse the XML files, store data in the back-end and basically make everything work tells me he had very little clue about what he was getting himself into. My impression is that WordPress has a very specific way of handling data as it divides everything into categories/sub-categories in the back-end which is very counter intuitive to a business model where data exists in numbers of over hundreds and thousands of items and is further cross referenced by programs so that any change in the programs XML file can easily be reflected products page. Conclusion I have a very specific database model implemented for handling my clients needs. However, this model conflicts with how wordpress chooses to save data in the back-end natively. I am absolutely convinced WordPress is geared towards anything that might resemble a blog and definitely not THIS. I am thinking about asking my client to shift to a custom CMS. Before making my pitch though, I wanted to run this by the stack community. Thanks for the input in advance.

  Read the article

• Microsoft 2003 DNS sometimes cant query for some A pointers when their TTL expires

  - by Bq

  Warning Long question :) We have a win 2003 server with a DNS server, every now and then it cant provide us with some A pointers for a specific domain. I have a small script running which asks for SOA,NS and A records for the domain in question and sometimes when the TTL expires the DNS fails to get the A records again, a Clear Cache fixes the problem.. Have a look Here it worked when the TTL expired Thu Apr 29 15:24:20 METDST 2010 dig basefarm.net soa basefarm.net. 64908 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 64908 IN NS ns01.sth.basefarm.net. basefarm.net. 64908 IN NS ns01.osl.basefarm.net. ns01.sth.basefarm.net. 299 IN A 80.76.149.76 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig ns01.sth.basefarm.net a ns01.sth.basefarm.net. 299 IN A 80.76.149.76 The TTL expired for ns01.sth.basefarm.net and ns01.osl.basefarm.net but the DNS managed to get the new values (TTL 3600) Thu Apr 29 15:29:20 METDST 2010 dig basefarm.net soa basefarm.net. 64608 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 3600 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 64608 IN NS ns01.sth.basefarm.net. basefarm.net. 64608 IN NS ns01.osl.basefarm.net. ns01.sth.basefarm.net. 3600 IN A 80.76.149.76 ns01.osl.basefarm.net. 3600 IN A 81.93.160.4 dig ns01.sth.basefarm.net a ns01.sth.basefarm.net. 3600 IN A 80.76.149.76 But then another time it fails, and we need to clear the dns cache for it to start working again... Thu Apr 29 17:24:23 METDST 2010 dig basefarm.net soa basefarm.net. 57705 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 57705 IN NS ns01.sth.basefarm.net. basefarm.net. 57705 IN NS ns01.osl.basefarm.net. ns01.sth.basefarm.net. 299 IN A 80.76.149.76 ns01.osl.basefarm.net. 299 IN A 81.93.160.4 dig ns01.sth.basefarm.net a ns01.sth.basefarm.net. 299 IN A 80.76.149.76 The TTL expires but the DNS cant get the ip addresses for ns01.sth.basefarm.net and ns01.osl.basefarm.net Thu Apr 29 17:29:23 METDST 2010 dig basefarm.net soa basefarm.net. 57405 IN SOA ns01.osl.basefarm.net. hostmaster.basefarm.net. 2010042613 86400 3600 2419200 600 ns01.osl.basefarm.net. 3600 IN A 81.93.160.4 dig basefarm.net ns basefarm.net. 57405 IN NS ns01.sth.basefarm.net. basefarm.net. 57405 IN NS ns01.osl.basefarm.net. dig ns01.sth.basefarm.net a Lookup failed I'm really lost on this one and have tried asking Google but to no avail..

  Read the article

• Roaming user profile issues on Server 2008

  - by Alicia White

  I thought I cleared a user's profile from 2008, but it keeps coming back. So, I was looking for the best way to clear a roaming profile in Server 2008, but I have been unable to find anything. But, I did see the post here: http://serverfault.com/questions/18724/user-profile-keeps-loading-temp-profile I wanted to add a comment to that post, but it was closed as not being related to sysadmin. But, I think it IS related because I dealt with precisely this same problem on our Wndows 2008 terminal server. Here was the issue: we have a user who was getting an "unable to load your roaming profile" type of error at logon in Windows 2008. Looking at the server, we could see her temp profile listed in the profile list while she was loggged (listed as a "temporary" and not a "roaming" profile). While she was logged on, a folder called C:\Users\Temp.DOMAIN existed in the users folder, but that disappeared as soon as she logged out. When this thing happened in 2003, we would clear the contents of the roaming profile folder & delete the temp folder in C:\Documents and Settings. The thing is, 2008 behaves a bit differently. Server 2008 created a new roaming profile folder in the roaming profile folder share: \SERVER\ProfileShare\UserName.V2 The local profile disappears from the profile list in System Properties, so there is no profile to clear Also the local profile folder, C:\Users\Temp.DOMAIN doesn't stay on the server when the user logs out, so we can't delete that as we would normally do when this sort of thing happens in Windows 2003 Despite all of this, every time the user logs back on, the frickin' Temp profile always comes back. One of my team-mates, who is much more experienced with 2008, said I should check the registry for the user's profile in this key (the users are listed by SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\WindowsNT\CurrentVersion\ProfileList I saw the user's SID listed there, but it ended in .BAK. I checked several other servers where she is having the same profile errors: in all cases, her SID ended with .BAK. For example (xxx replacing the LONG SID): HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak On the server she was logged on to, there were two keys for her profile in the registry: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx and HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList\S-1-5-21-xxxxx-xxxx.bak So, here is how I cleared up the issue. I had the user log off. I deleted the apparently bad profiles ending in .BAK from the ProfileList key on each server where it appeared. I made sure her roaming profile folder was empty I made sure that all the TEMP profile folders were gone The user logged back on: no more profile errors! Anyway, I wanted to make a comment on that closed question, but I didn't see any way to re-open the question so I could add it. But, I also would like to know if this is the best practice to clear out a bad roaming profile for Server 2008? I'm having a hard time finding any instructions on line on how best to do this, but this method I used seemed to work. I'd like to find some documentation to give to our Level 1 support staff so they will know how to clear user profiles on 2008 since this seems to be more involved that clearing user profiles in server 2003. Thanks, Alicia

  Read the article

• IIS7 web farm - local or shared content?

  - by rbeier

  We're setting up an IIS7 web farm with two servers. Should each server have its own local copy of the content, or should they pull content directly from a UNC share? What are the pros and cons of each approach? We currently have a single live server WEB1, with content stored locally on a separate partition. A job periodically syncs WEB1 to a standby server WEB2, using robocopy for content and msdeploy for config. If WEB1 goes down, Nagios notifies us, and we manually run a script to move the IP addresses to WEB2's network interface. Both servers are actually VMs running on separate VMWare ESX 4 hosts. The servers are domain-joined. We have around 50-60 live sites on WEB1 - mostly ASP.NET, with a few that are just static HTML. Most are low-traffic "microsites". A few have moderate traffic, but none are massive. We'd like to change this so both WEB1 and WEB2 are actively serving content. This is mainly for reliability - if WEB1 goes down, we don't want to have to manually intervene to fail things over. Spreading the load is also nice, but the load is not high enough right now for us to need this. We're planning to configure our firewall to balance traffic across the two servers. It will detect when a server goes down and will send all the traffic to the remaining live server. We're planning to use sticky sessions for now... eventually we may move to SQL Server session state and stateless load balancing. But we need a way for the servers to share content. We were originally planning to move all the content to a UNC share. Our storage provider says they can set up a highly available SMB share for us. So if we go the UNC route, the storage shouldn't be a single point of failure. But we're wondering about the downsides to this approach: We'll need to change the physical paths for each site and virtual directory. There are also some projects that have absolute paths in their web.config files - we'll have to update those as well. We'll need to create a domain user for the web servers to access the share, and grant that user appropriate permissions. I haven't looked into this yet - I'm not sure if the application pool identity needs to be changed to this user, or if there's another way to tell IIS to use this account when connecting to the share. Sites will no longer be able to access their content if there's ever an Active Directory problem. In general, it just seems a lot more complicated, with more moving parts that could break. Our storage provider would create a volume for us on their redundant SAN. If I understand correctly, this SAN volume would be mounted on a VM running in their redundant VMWare environment; this VM would then expose the SMB share to our web servers. On the other hand, a benefit of the shared content approach is that we'd only need to deploy code to one place, and there would never be a temporary inconsistency between multiple copies of the content. This thread is pretty interesting, though some of these people are working at a much larger scale. I've just been discussing content so far, but we also need to think about configuration. I don't know if we can just use DFS replication for the applicationHost.config and other files, or if it's best to use the shared configuration feature with the config on a UNC share. What do you think? Thanks for your help, Richard

  Read the article

• Cannot turn on "Network Discovery and File Sharing" when Windows Firewall is enabled

  - by Cheeso

  I have a problem similar to this one. Windows Firewall prevents File and Printer sharing from working and Why does File and Printer Sharing keep turning off in Windows 7? I cannot turn on Network Discovery. This is Windows 7 Home Premium, x64. It's a Dell XPS 1340 and Windows came installed from the OEM. This used to work. Now it doesn't. I don't know what has changed. In windows Explorer, the UI looks like this: When I click the yellow panel that says "Click to change...", the panel disappears, then immediately reappears, with exactly the same text. If I go through the control panel "Network and Sharing Center" thing, the UI looks like this: If I tick the box to "turn on network discovery", the "Save Changes" button becomes enabled. If I then click that button, the dialog box just closes, with no message or confirmation. Re-opening the same dialog box shows that Network Discovery has not been turned on. If I turn off Windows Firewall, I can then turn on Network Discovery via either method. The machine is connected to a wireless home network, via a router. The network is marked as "Home Network" in the Network and Sharing Center, which I think corresponds to the "Private" profile in Windows Firewall Advanced Settings app. (Confirm?) The PC is not part of a domain, and has never been part of a domain. The machine is not bridging any networks. There is a regular 100baseT connector but I have the network adapter for that disabled in Windows. Something else that seems odd. Within Windows Firewall Advanced Settings, there are no predefined rules available. If I click the "New Rule...." Action on the action pane, the "Predefined" option is greyed out. like this: In order to attempt to allow the network discovery protocols through on the private network, I hand-coded a bunch of rules, intending to allow the necessary UPnP and WDP protocols supporting network discovery. I copied them from a working Windows 7 Ultimate PC, running on the same network. This did not work. Even with the hand-coded rules, I still cannot turn on Network Discovery. I looked on the interwebs, and the only solution that appears to work is a re-install of Windows. Seriously? If I try netsh advfirewall firewall set rule group="Network Discovery" new enable=Yes ...it says "No rules match the specified criteria" EDIT: by the way, these services are running. DNS Client Function Discovery Resource Publication SSDP Discovery UPnP Device Host in any case, since it works with no firewall, I would assume all necessary services are present and running. The issue is a firewall thing, but I don't know how to diagnose further, or fix it. Q1: Is there a way to definitively insure the correct holes are punched through the Windows Firewall to allow Network Discovery to function? Q2: Should I expect the "predefined" firewall rules to be greyed out? Q3: Why did this change?

  Read the article

• Cisco ASA (Client VPN) to LAN - through second VPN to second LAN

  - by user50855

  We have 2 site that is linked by an IPSEC VPN to remote Cisco ASAs: Site 1 1.5Mb T1 Connection Cisco(1) 2841 Site 2 1.5Mb T1 Connection Cisco 2841 In addition: Site 1 has a 2nd WAN 3Mb bonded T1 Connection Cisco 5510 that connects to same LAN as Cisco(1) 2841. Basically, Remote Access (VPN) users connecting through Cisco ASA 5510 needs access to a service at the end of Site 2. This is due to the way the service is sold - Cisco 2841 routers are not under our management and it is setup to allow connection from local LAN VLAN 1 IP address 10.20.0.0/24. My idea is to have all traffic from Remote Users through Cisco ASA destined for Site 2 to go via the VPN between Site 1 and Site 2. The end result being all traffic that hits Site 2 has come via Site 1. I'm struggling to find a great deal of information on how this is setup. So, firstly, can anyone confirm that what I'm trying to achieve is possible? Secondly, can anyone help me to correct the configuration bellow or point me in the direction of an example of such a configuration? Many Thanks. interface Ethernet0/0 nameif outside security-level 0 ip address 7.7.7.19 255.255.255.240 interface Ethernet0/1 nameif inside security-level 100 ip address 10.20.0.249 255.255.255.0 object-group network group-inside-vpnclient description All inside networks accessible to vpn clients network-object 10.20.0.0 255.255.255.0 network-object 10.20.1.0 255.255.255.0 object-group network group-adp-network description ADP IP Address or network accessible to vpn clients network-object 207.207.207.173 255.255.255.255 access-list outside_access_in extended permit icmp any any echo-reply access-list outside_access_in extended permit icmp any any source-quench access-list outside_access_in extended permit icmp any any unreachable access-list outside_access_in extended permit icmp any any time-exceeded access-list outside_access_in extended permit tcp any host 7.7.7.20 eq smtp access-list outside_access_in extended permit tcp any host 7.7.7.20 eq https access-list outside_access_in extended permit tcp any host 7.7.7.20 eq pop3 access-list outside_access_in extended permit tcp any host 7.7.7.20 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq www access-list outside_access_in extended permit tcp any host 7.7.7.21 eq https access-list outside_access_in extended permit tcp any host 7.7.7.21 eq 5721 access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient any access-list acl-vpnclient extended permit ip object-group group-inside-vpnclient object-group group-adp-network access-list acl-vpnclient extended permit ip object-group group-adp-network object-group group-inside-vpnclient access-list PinesFLVPNTunnel_splitTunnelAcl standard permit 10.20.0.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 10.20.1.0 255.255.255.0 access-list inside_nat0_outbound_1 extended permit ip 10.20.0.0 255.255.255.0 host 207.207.207.173 access-list inside_nat0_outbound_1 extended permit ip 10.20.1.0 255.255.255.0 host 207.207.207.173 ip local pool VPNPool 10.20.1.100-10.20.1.200 mask 255.255.255.0 route outside 0.0.0.0 0.0.0.0 7.7.7.17 1 route inside 207.207.207.173 255.255.255.255 10.20.0.3 1 crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto dynamic-map outside_dyn_map 20 set security-association lifetime seconds 288000 crypto dynamic-map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set reverse-route crypto map outside_map 20 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto map outside_dyn_map 20 match address acl-vpnclient crypto map outside_dyn_map 20 set security-association lifetime seconds 28800 crypto map outside_dyn_map 20 set security-association lifetime kilobytes 4608000 crypto isakmp identity address crypto isakmp enable outside crypto isakmp policy 20 authentication pre-share encryption 3des hash sha group 2 lifetime 86400 group-policy YeahRightflVPNTunnel internal group-policy YeahRightflVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 vpn-tunnel-protocol IPSec password-storage disable pfs disable split-tunnel-policy tunnelspecified split-tunnel-network-list value acl-vpnclient default-domain value YeahRight.com group-policy YeahRightFLVPNTunnel internal group-policy YeahRightFLVPNTunnel attributes wins-server value 10.20.0.9 dns-server value 10.20.0.9 10.20.0.7 vpn-tunnel-protocol IPSec split-tunnel-policy tunnelspecified split-tunnel-network-list value YeahRightFLVPNTunnel_splitTunnelAcl default-domain value yeahright.com tunnel-group YeahRightFLVPN type remote-access tunnel-group YeahRightFLVPN general-attributes address-pool VPNPool tunnel-group YeahRightFLVPNTunnel type remote-access tunnel-group YeahRightFLVPNTunnel general-attributes address-pool VPNPool authentication-server-group WinRadius default-group-policy YeahRightFLVPNTunnel tunnel-group YeahRightFLVPNTunnel ipsec-attributes pre-shared-key *

  Read the article

• Exchange 2010 OWA - a few questions about using multiple mailboxes

  - by Alexey Smolik

  We have an Exchange 2010 SP2 deployment and we need that our users could access multiple mailboxes in OWA. The problem is that a user (eg John Smith) needs to access not just somebody else's (eg Tom Anderson) mailboxes, but his OWN mailboxes, e.g. in different domains: [email protected], [email protected], [email protected], etc. Of course it is preferable for the user to work with all of his mailboxes from a single window. Such mailboxes can be added as multiple Exchange accounts in Outlook, that works almost fine. But in OWA, there are problems: 1) In the left pane - as I've learned - we can open only Inbox folders from other mailboxes. No way to view all folders like in Outlook? 2) With Send-As permissions set, when trying to send a message from another address, that message is saved in the Sent Items folder of the mailbox that is opened in OWA, and not in the mailbox the message is sent from. The same thing with the trash can. Is there a way to fix that? Also, this problem exists in desktop Outlook when mailboxes are added automatically via the Auto Mapping feature, so that we need to turn it off and add the accounts manually. Is there a simpler workaround? 3) Okay, suppose we only open Inbox folders in the left pane. The problem is that the mailbox names shown there are formed from Display Name attributes. But those names are all identical! All the mailboxes are owned by John Smith, so they should be all named John Smith - so that letter recepient sees "John Smith" in the "from" field, no matter what mailbox it is sent from. Also, the user knows what's his name - no need to tell him. He wants to know what mailbox he works with. So we need a way to either: a) customize OWA to show mailbox email address instead of user Display Name, or b) make Exchange use another attribute to put in the "from" field when sending letters 4) Okay, we can switch between mailboxes using "Open Other Mailbox" in the upper-right corner menu. But: a) To select a mailbox we need to enter its name (or first letters). It there a way to show a list of links to mailboxes the user has full access to? Eg in the page header... b) If we start entering the first letters, we see a popup list with possible mailboxes to be opened. But there are all mailboxes (apparently from GAL), not only mailboxes the user has permission to open! How to filter that popup list? c) The same problem as in (3) with mailbox naming. We can see the opened mailbox email address ONLY in the page URL, which is insufficient for many users. In the left pane we see "John Smith" which is useless. 5) Each mailbox is tied with a separate user in AD. If one has several mailboxes, we need to have additional dummy AD accounts, create additional OUs to store them, etc. That's not very nice, is there any standartized, optimal way to build such a structure? We would really appreciate any answers or additional info for any of these questions. Thank you in advance.

  Read the article

• Nginx + PHP-FPM = "Random" 502 Bad Gateway

  - by david

  I am running Nginx and proxying php requests via FastCGI to PHP-FPM for processing. I will randomly receive 502 Bad Gateway error pages - I can reproduce this issue by clicking around my PHP websites very rapidly/refreshing a page for a minute or two. When I get the 502 error page all I have to do is refresh the browser and the page refreshes properly. Here is my setup: nginx/0.7.64 PHP 5.3.2 (fpm-fcgi) (built: Apr 1 2010 06:42:04) Ubuntu 9.10 (Latest 2.6 Paravirt) I compiled PHP-FPM using this ./configure directive ./configure --enable-fpm --sysconfdir=/etc/php5/conf.d --with-config-file-path=/etc/php5/conf.d/php.ini --with-zlib --with-openssl --enable-zip --enable-exif --enable-ftp --enable-mbstring --enable-mbregex --enable-soap --enable-sockets --disable-cgi --with-curl --with-curlwrappers --with-gd --with-mcrypt --enable-memcache --with-mhash --with-jpeg-dir=/usr/local/lib --with-mysql=/usr/bin/mysql --with-mysqli=/usr/bin/mysql_config --enable-pdo --with-pdo-mysql=/usr/bin/mysql --with-pdo-sqlite --with-pspell --with-snmp --with-sqlite --with-tidy --with-xmlrpc --with-xsl My php-fpm.conf looks like this (the relevant parts): ... <value name="pm"> <value name="max_children">3</value> ... <value name="request_terminate_timeout">60s</value> <value name="request_slowlog_timeout">30s</value> <value name="slowlog">/var/log/php-fpm.log.slow</value> <value name="rlimit_files">1024</value> <value name="rlimit_core">0</value> <value name="chroot"></value> <value name="chdir"></value> <value name="catch_workers_output">yes</value> <value name="max_requests">500</value> ... I've tried increasing the max_children to 10 and it makes no difference. I've also tried setting it to 'dynamic' and setting max_children to 50, and start_server to '5' without any difference. I have tried using both 1 and 5 nginx worker processes. My fastcgi_params conf looks like: fastcgi_connect_timeout 60; fastcgi_send_timeout 180; fastcgi_read_timeout 180; fastcgi_buffer_size 128k; fastcgi_buffers 4 256k; fastcgi_busy_buffers_size 256k; fastcgi_temp_file_write_size 256k; fastcgi_intercept_errors on; fastcgi_param QUERY_STRING $query_string; fastcgi_param REQUEST_METHOD $request_method; fastcgi_param CONTENT_TYPE $content_type; fastcgi_param CONTENT_LENGTH $content_length; fastcgi_param SCRIPT_NAME $fastcgi_script_name; fastcgi_param REQUEST_URI $request_uri; fastcgi_param DOCUMENT_URI $document_uri; fastcgi_param DOCUMENT_ROOT $document_root; fastcgi_param SERVER_PROTOCOL $server_protocol; fastcgi_param GATEWAY_INTERFACE CGI/1.1; fastcgi_param SERVER_SOFTWARE nginx/$nginx_version; fastcgi_param REMOTE_ADDR $remote_addr; fastcgi_param REMOTE_PORT $remote_port; fastcgi_param SERVER_ADDR $server_addr; fastcgi_param SERVER_PORT $server_port; fastcgi_param SERVER_NAME $server_name; fastcgi_param REDIRECT_STATUS 200; Nginx logs the error as: [error] 3947#0: *10530 connect() failed (111: Connection refused) while connecting to upstream, client: 68.40.xxx.xxx, server: www.domain.com, request: "GET /favicon.ico HTTP/1.1", upstream: "fastcgi://127.0.0.1:9000", host: "www.domain.com" PHP-FPM logs the follow at the time of the error: [NOTICE] pid 17161, fpm_unix_init_main(), line 255: getrlimit(nofile): max:1024, cur:1024 [NOTICE] pid 17161, fpm_event_init_main(), line 93: libevent: using epoll [NOTICE] pid 17161, fpm_init(), line 50: fpm is running, pid 17161 [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17162 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17163 started [DEBUG] pid 17161, fpm_children_make(), line 403: [pool default] child 17164 started [NOTICE] pid 17161, fpm_event_loop(), line 111: ready to handle connections My CPU usage maxes out around 10-15% when I recreate the issue. My Free mem (free -m) is 130MB I had this intermittent 502 Bad Gateway issue when in was using php5-cgi to service my php requests as well. Does anyone know how to fix this?

  Read the article

• Troubleshooting PHP email sending?

  - by darkAsPitch

  I created a website that occasionally emails users when they register/change their password/etc. Every other person however cannot or does not receive the emails. They are telling me that they are not even hitting their spam folders. I don't know a ton about MX records or email sending, but when I "Edit DNS Zone" for this domain in particular there is 1 MX record listed there. How do you go about troubleshooting botched PHP mail actions? UPDATE: Here is my super-simple php mailing code: $subject = "Subject Here"; $message = "Emails Message"; $to = $verified_user_data["email_address"]; $headers = "From: [email protected]\r\n" . "Reply-To: [email protected]\r\n" . "X-Mailer: PHP/" . phpversion(); //returns true on success, false on failure $email_result = mail($to, $subject, $message, $headers); re: "are you saying that some do and some do not?" @ Jacob Yes, basically. I send the emails containing the user's login username/password using similar code above. And I sell to fairly tech-savvy people. About 50% of the time, my customers claim they cannot find their welcome emails in their inbox OR in their spam box. It's as if it never arrived. I have the largest problem with Yahoo email addresses accepting my emails or so it seems. re: "The MX record at your end doesn't factor in, although the SPF record (or lack of it) will. How much access and control do you have on the server itself?" @ John Gardeniers I rent a dedicated server from Codero. Running CentOS 5, WHM + cPanel. I have full root access to the entire thing. Don't know much about MX records and/or SPF records. I just want the PHP mail function to work. It doesn't say much about that on the php mail function's help page. re: "What are you using for the SMTP server?" @ JonLim No idea. I use the code above when I need to fire off an email to a loyal customer, and that's it. Do I need to be worrying about SMTP servers? re: "Could be many, many things. Can you describe how you're sending mail in your code? i.e. are you relaying off of another mail server somewhere, using the local sendmail or postfix? Any consistency in domains that can/cannot receive email? Do you have a PTR record setup from the IP address that you're sending mail out as? What about SPF records?" @ gravyface I just described my simple code above! I believe I have been having the most trouble with Yahoo domains, however "independent" domains (probably running spamassasin) ex. [email protected] as opposed to [email protected] seem to give a lot of trouble as well. I do not know if I have a PTR record setup from the IP address I'm sending my mail from. It's probably the same IP address that I setup my domain on, because I didn't do anything extra special. No idea about SPF records either, where can I go to create one? Side Note: It's a crying shame what havoc the spammers have brought upon our beloved email system.

  Read the article

• Dhcpd Daemon is trying to lease itself?

  - by tommieb75

  I have a Slackware Linux 13.0 box with two interfaces, eth0 and eth1. I have set this box up to be on the 192.168.1.0/24 network, with subnet mask of 255.255.255.0. I am trying to run a dhcpd server on this box to service two interfaces above, so I subnetted the 192.168.1.0/24 network into two subnets. For eth0 192.168.1.1, subnet mask 255.255.255.128, broadcast mask 192.168.1.127. For eth1 192.168.1.129, subnet mask 255.255.255.128, broadcast mask 192.168.1.255. Both the interfaces are assigned manually. eth0 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.1.1 Bcast:192.168.1.127 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0 TX packets:39 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:0 (0.0 B) TX bytes:1404 (1.3 KiB) Interrupt:11 Base address:0x8000 Memory:faffc000-faffcfff eth1 Link encap:Ethernet HWaddr 00:00:00:00:00:00 inet addr:192.168.1.128 Bcast:192.168.1.255 Mask:255.255.255.128 UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:10003 errors:0 dropped:0 overruns:0 frame:0 TX packets:13286 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:1589229 (1.5 MiB) TX bytes:9900005 (9.4 MiB) Interrupt:11 Here is the dhcpd.conf set up authoritative; ddns-update-style interim; ignore client-updates; subnet 192.168.1.0 netmask 255.255.255.128 { range 192.168.1.2 192.168.1.126; default-lease-time 86400; max-lease-time 86400; option routers 192.168.1.1; option ip-forwarding off; option domain-name-servers 208.67.222.222, 208.67.220.220; option broadcast-address 192.168.1.127; option subnet-mask 255.255.255.128; } subnet 192.168.1.128 netmask 255.255.255.128 { range 192.168.1.129 192.168.1.254; default-lease-time 86400; max-lease-time 86400; option routers 192.168.1.1; option ip-forwarding off; option domain-name-servers 208.67.222.222, 208.67.220.220; option broadcast-address 192.168.1.255; option subnet-mask 255.255.255.128; } This is what is showing in the log Apr 10 18:09:58 inspiron8600 dhcpd: DHCPDISCOVER from 00:00:00:00:00:00 (inspiron8600) via eth1 Apr 10 18:09:58 inspiron8600 dhcpd: DHCPOFFER on 192.168.1.131 to 00:00:00:00:00:00 (inspiron8600) via eth1 Apr 10 18:10:01 inspiron8600 dhcpcd[3832]: eth1: adding IP address 169.254.153.6/16 This is happening spuriously, and the log gets filled up with nonsense..so my question is this: How do I stop this from happening? And why would it be trying to give itself a lease? I am sure I have missed something but cannot see it and would appreciate a pair of eyes from the community to spot the obvious flaw!

  Read the article

• How should I ask for help in getting my emails to stop bouncing?

  - by Gregg Williams

  For several months, people have been telling me that emails they sent to me have been bouncing back, marked as undeliverable. The bounce message would contain portions like this: Final-Recipient: rfc822;[email protected] Action: failed Status: 5.7.1 Diagnostic-Code: smtp;550 5.7.1 <[email protected]>... Recipient declines email from 69.64.159.2, <spamhaus-xbl>, Ref: http://www.spamhaus.org/query/bl?ip=69.64.159.2 Clicking the link on the last line, the destination page told me that "this IP address is infected with/emitting spamware/spamtrojan traffic and needs to be fixed." I could temporarily de-list this node by clicking a link on that page, but it would get back on the list and more emails to me to bounce. I own a domain, innerpaths.net, and I normally use [email protected] for my email. I have my domain registrar, namecheap.com, forward all email from innerpaths.net to the email account [email protected]. (BTW, I had this same problem at a former registrar. I changed registrars, hoping that would fix the problem. It didn't.) Trying to isolate the problem, I asked namecheap.com what I should do. Their answer, though substantial, left me scratching my head: We have received feedback from our upstream provider which informed us that the mail server that you are trying to email subscribes to a 3rd party blacklist service which they appear to be listed on at the present time and is causing destination mail server to reject the messages. Being blocked with one of these services can happen to anyone for many reasons and is something that is beyond our control. 3rd party blacklist services require companies whose mail servers they have blacklisted, pay fees in order to be removed from their lists. As we cannot pay fees to blacklist services which require them for removal, you should contact your email provider and have them whitelist our mail server IP address: 69.64.157.73. My best guess is that I should email my ISP, sonic.net, tell them what is going on and ask them to whitelist the IP address 69.64.157.73. (If not, please let me know.) But I want to know what is going on and how email works. I understand that there's a device at location 69.64.159.2 that is doing something bad that causes the "destination mail server [sonic.net's, I assume --gw] to reject the messages." I know that email is sent through multiple devices in a way that eventually gets it to its destination. Beyond that, here are my questions: 1) I thought the Internet "routed around damage." Why does email starting at namecheap.com always (or is it 'sometimes'?) go through 69.64.159.2? 2) Who is the "upstream provider" that the namecheap.com representative mentions, and what is their role? 3) How does having sonic.net's whitelisting namecheap.com's mail server prevent my email being bounced by 69.64.159.2? I've searched the Internet for answers but have found nothing useful. Thanks for whatever answers you can provide.

  Read the article

• Single-Signon options for Exchange 2010

  - by freiheit

  We're working on a project to migrate employee email from Unix/open-source (courier IMAP, exim, squirrelmail, etc) to Exchange 2010, and trying to figure out options for single-signon for Outlook Web Access. So far all the options I've found are very ugly and "unsupportable", and may simply not work with Forefront. We already have JA-SIG CAS for token-based single-signon and Shibboleth for SAML. Users are directed to a simple in-house portal (a Perl CGI, really) that they use to sign in to most stuff. We have an HA OpenLDAP cluster that's already synchronized against another AD domain and will be synchronized with the AD domain Exchange will be using. CAS authenticates against LDAP. The portal authenticates against CAS. Shibboleth authenticates with CAS but pulls additional data from LDAP. We're moving in the direction of having web services authenticate against CAS or Shibboleth. (Students are already on SAML/Shibboleth authenticated Google Apps for Education) With Squirrelmail we have a horrible hack linked to from that portal page that authenticates against CAS, gets your original plaintext password (yes, I know, evil), and gives you an HTTP form pre-filled with all the necessary squirrelmail login details with javaScript onLoad stuff to immediately submit the form. Trying to find out exactly what is possible with Exchange/OWA seems to be difficult. "CAS" is both the acronym for our single-signon server and an Exchange component. From what I've been able to tell there's an addon for Exchange that does SAML, but only for federating things like free/busy calendar info, not authenticating users. Plus it costs additional money so there's no way to experiment with it to see if it can be coaxed into doing what we want. Our plans for the Exchange cluster involve Forefront Threat Management Gateway (the new ISA) in the DMZ front-ending the CAS servers. So, the real question: Has anybody managed to make Exchange authenticate with CAS (token-based single-signon) or SAML, or with something I can reasonably likely make authenticate with one of those (such as anything that will accept apache's authentication)? With Forefront? Failing that, anybody have some tips on convincing OWA Forms Based Authentication (FBA) into letting us somehow "pre-login" the user? (log in as them and pass back cookies to the user, or giving the user a pre-filled form that autosubmits like we do with squirrelmail). This is the least-favorite option for a number of reasons, but it would (just barely) satisfy our requirements. From what I hear from the guy implementing Forefront, we may have to set OWA to basic authentication and do forms in Forefront for authentication, so it's possible this isn't even possible. I did find CasOwa, but it only mentions Exchange 2007, looks kinda scary, and as near as I can tell is mostly the same OWA FBA hack I was considering slightly more integrated with the CAS server. It also didn't look like many people had had much success with it. And it may not work with Forefront. There's also "CASifying Outlook Web Access 2", but that one scares me, too, and involves setting up a complex proxy config, which seems more likely to break. And, again, doesn't look like it would work with Forefront. Am I missing something with Exchange SAML (OWA Federated whatchamacallit) where it is possible to configure to do user authentication and not just free/busy access authorization?

  Read the article

• ubuntu 10.04; kvm bridged networking not working with public ip addresses

  - by senorsmile

  I have a dedicated hosted server box with ubuntu 10.04 64 bit installed. I would like to run kvm with ubuntu 8.04 installed for some php 5.2 compatible apps(they don't work right with php 5.3, the default in ubuntu 10.04). I installed KVM as instructed at https://help.ubuntu.com/community/KVM/Installation . I installed the vm using virt-manager. I never could figure out how use virt-install or any of those automated installers. I just installed it using the disc. I set up bridged networking as per https://help.ubuntu.com/community/KVM/Networking . However, the bridged connection doesn't work. Here's my /etc/network/interfaces on the host, running ubuntu 10.04. (with specific public ip blanked) auto lo iface lo inet loopback auto eth0 iface eth0 inet manual auto br0 iface br0 inet static address xx.xx.xx.xx netmask 255.255.255.248 gateway xx.xx.xx.xa bridge_ports eth0 bridge_stp on bridge_fd 0 bridge_maxwait 10 ` Here's my /etc/network/interfaces on the guest, running ubuntu 8.04. auto lo iface lo inet loopback auto eth0 iface eth0 inet static address xx.xx.xx.xy netmask 255.255.255.248 gateway xx.xx.xx.xa The two vm's can communicate to each other. But, the guest vm can't access anyone in the real world. Here's my /etc/libvirt/qemu/store_804.xml <domain type='kvm'> <name>store_804</name> <uuid>27acfb75-4f90-a34c-9a0b-70a6927ae84c</uuid> <memory>2097152</memory> <currentMemory>2097152</currentMemory> <vcpu>2</vcpu> <os> <type arch='x86_64' machine='pc-0.12'>hvm</type> <boot dev='hd'/> </os> <features> <acpi/> <apic/> <pae/> </features> <clock offset='utc'/> <on_poweroff>destroy</on_poweroff> <on_reboot>restart</on_reboot> <on_crash>restart</on_crash> <devices> <emulator>/usr/bin/kvm</emulator> <disk type='file' device='disk'> <driver name='qemu' type='raw'/> <source file='/var/lib/libvirt/images/store_804.img'/> <target dev='hda' bus='ide'/> </disk> <disk type='block' device='cdrom'> <driver name='qemu' type='raw'/> <target dev='hdc' bus='ide'/> <readonly/> </disk> <interface type='bridge'> <mac address='52:54:00:26:0b:c6'/> <source bridge='br0'/> <model type='virtio'/> </interface> <console type='pty'> <target port='0'/> </console> <console type='pty'> <target port='0'/> </console> <input type='mouse' bus='ps2'/> <graphics type='vnc' port='-1' autoport='yes'/> <sound model='es1370'/> <video> <model type='cirrus' vram='9216' heads='1'/> </video> </devices> </domain> Any idea where I've gone wrong?

  Read the article

• Outlook 2007 Does Not Accept Login Credentials, OWA Webmail Does. Troubleshooting Advice?

  - by Chris

  I am trying to connect Outlook 2007 to Exchange (Hosted Exchange from Rackspace). Soon, I will need to roll this out for our entire office. With the Exchange account added to Outlook, Outlook starts up and asks for the user's username and password. Unfortunately, it doesn't like the password I use for it. I can confirm this username (email address) and password combo works by using Outlook WebMail, and another user (in another network/office) confirmed the Exchange account does work within his Outlook client. In my network/office, I can confirm that an Outlook 2007 client (under Windows 7) can connect to the Hosted Exchange server from Rackspace. However, I have not been able to get Outlook 2007 (under Windows XP SP3) to connect to the very same Exchange server Outlook 2007 (under Windows 7) can connect to. Outlook continuously prompts me for the username and password and does not accept the correct combination. Now, regarding the Outlook client that cannot connect/login to Exchange: The user has full admin rights on the workstation We do not run a domain controller/LDAP The firewall on the workstation has been disabled Real time file scanning in Microsoft Security Essentials has been disabled There are no virus scanning applications that would interface with Outlook or an email server. The Exchange account is setup to run on a newly created Outlook profile The network firewall does not log any blocked attempts A packet capture at the router reveals communication between the workstation and the Exchange server or proxy (though, this is SSL encrypted, so I don't know what the computers are saying) I have applied a fix (Added DWORD value of 0 for DefConnectOpts under HKEY_CURRENT_USER\Software\Microsoft\Office\12.0\Outlook\RPC) that was recommended to make RPC function when the workstation does not have a default gateway set. Workstation is configured as DHCP. This fix did nothing, and it may be worth noting the RPC subkey was not present until I added it. RPC service is running on the workstation The program is not running under any compatibility mode. Side note: Outlook 2007 installs with compatibility mode for XP enabled by default in windows 7. Outlook 2007 will not even try to connect to exchange if this compatibility mode is checked. In windows xp, I tried checking compatibility mode for windows 2000, and was unable to connect to exchange as well. Here is the specific configuration I've used in a blank outlook profile: Microsoft Exchange Server: ##MASKED##-MBX-C18.mex07a.mlsrvr.com Username: (Full Email Address: [email protected]) Password: ##MASKED## Outlook Anywhere: Connect to Microsoft Exchange using HTTP Exchange Proxy Settings: Proxy Server: mex07a.emailsrvr.com Check "Connect using SSL only" Under "Only connect to proxy servers...", enter: msstd:mex07a.emailsrvr.com Check "On fast networks, connect using HTTP first, then connect using TCP/IP" Check "On slow networks, connect using HTTP first, then connect using TCP/IP" Proxy authentication settings: Basic Authentication Notes: mex07a.mlsrvr.com and mex07a.emailsrvr.com may look incorrect at first glance, but this is not a typo - these instructions were handed down from rackspace and are confirmed to be working, just not on this workstation. I have tried to use the RpcPing utility but must have been using it wrong. I got as far as "Bad Interface Descriptor". It would seem to me getting Outlook and Exchange to work together would be a breeze, especially since everything is done over port 80 with web services. Unfortunately, the user is stuck with WebMail access only, because Outlook won't accept the Exchange credentials. Do you have any ideas of other things I could try to debug this issue further? Any and all help is greatly appreciated. Thank you! -Chris

  Read the article

• RHCS: GFS2 in A/A cluster with common storage. Configuring GFS with rgmanager

  - by Pavel A

  I'm configuring a two node A/A cluster with a common storage attached via iSCSI, which uses GFS2 on top of clustered LVM. So far I have prepared a simple configuration, but am not sure which is the right way to configure gfs resource. Here is the rm section of /etc/cluster/cluster.conf: <rm> <failoverdomains> <failoverdomain name="node1" nofailback="0" ordered="0" restricted="1"> <failoverdomainnode name="rhc-n1"/> </failoverdomain> <failoverdomain name="node2" nofailback="0" ordered="0" restricted="1"> <failoverdomainnode name="rhc-n2"/> </failoverdomain> </failoverdomains> <resources> <script file="/etc/init.d/clvm" name="clvmd"/> <clusterfs name="gfs" fstype="gfs2" mountpoint="/mnt/gfs" device="/dev/vg-cs/lv-gfs"/> </resources> <service name="shared-storage-inst1" autostart="0" domain="node1" exclusive="0" recovery="restart"> <script ref="clvmd"> <clusterfs ref="gfs"/> </script> </service> <service name="shared-storage-inst2" autostart="0" domain="node2" exclusive="0" recovery="restart"> <script ref="clvmd"> <clusterfs ref="gfs"/> </script> </service> </rm> This is what I mean: when using clusterfs resource agent to handle GFS partition, it is not unmounted by default (unless force_unmount option is given). This way when I issue clusvcadm -s shared-storage-inst1 clvm is stopped, but GFS is not unmounted, so a node cannot alter LVM structure on shared storage anymore, but can still access data. And even though a node can do it quite safely (dlm is still running), this seems to be rather inappropriate to me, since clustat reports that the service on a particular node is stopped. Moreover if I later try to stop cman on that node, it will find a dlm locking, produced by GFS, and fail to stop. I could have simply added force_unmount="1", but I would like to know what is the reason behind the default behavior. Why is it not unmounted? Most of the examples out there silently use force_unmount="0", some don't, but none of them give any clue on how the decision was made. Apart from that I have found sample configurations, where people manage GFS partitions with gfs2 init script - https://alteeve.ca/w/2-Node_Red_Hat_KVM_Cluster_Tutorial#Defining_The_Resources or even as simply as just enabling services such as clvm and gfs2 to start automatically at boot (http://pbraun.nethence.com/doc/filesystems/gfs2.html), like: chkconfig gfs2 on If I understand the latest approach correctly, such cluster only controls whether nodes are still alive and can fence errant ones, but such cluster has no control over the status of its resources. I have some experience with Pacemaker and I'm used to that all resources are controlled by a cluster and an action can be taken when not only there are connectivity issues, but any of the resources misbehave. So, which is the right way for me to go: leave GFS partition mounted (any reasons to do so?) set force_unmount="1". Won't this break anything? Why this is not the default? use script resource <script file="/etc/init.d/gfs2" name="gfs"/> to manage GFS partition. start it at boot and don't include in cluster.conf (any reasons to do so?) This may be a sort of question that cannot be answered unambiguously, so it would be also of much value for me if you shared your experience or expressed your thoughts on the issue. How does for example /etc/cluster/cluster.conf look like when configuring gfs with Conga or ccs (they are not available to me since for now I have to use Ubuntu for the cluster)? Thanks you very much!

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >