Search Results

Search found 16891 results on 676 pages for 'custom cell'.

Page 430/676 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

• Misadventures at Radio Shack

  - by Chris Williams

  While I'm waiting for my Arduino kits to show up, I started reading the Getting Started With Arduino book from O'Reilly (review coming later) and I'm about 40 pages in when I get to a parts list for one of the first projects. Looks pretty straightforward, and even has Radio Shack part numbers next to almost everything. So on my lunch today, I decided to run out to "The Shack" (seriously, that's their rebranding?) to pick up some basics, like a couple resistors, a breadboard, a momentary switch and a pack of pre-cut jumper wires. I found the resistors without any difficulty, and while they didn't have the exact switch I wanted, it was easy enough to find one that would do. That's where my good luck abruptly ended. I was surprised that I couldn't find a breadboard or any jumper wires, so while I was looking around, a guy came up and asked me if I needed some help. I told him I did, explained what I needed and even gave him the Radio Shack part number for the pack of jumper wires. After a couple minutes he says he can't find anything in the system, which was unfortunate but not the end of the world.  So then I asked him about the breadboard, and he pointed me to some blank circuitboards (which are not the same thing) and I said (nicely) that those weren't breadboards and attempted to explain (again) what I needed, at which point he says to me "I don't even know what the hell you're looking for!" I stood there for a moment and tried to process his words. About that time, another salesperson came up and asked what I was trying to find. I told her I needed a breadboard, and she pointed to the blank circuit boards and said "they're right in front of you..." After seeing the look on my face, she thought for a minute and said... "OH! you mean those white things. We don't have those anymore." I thanked her, set everything down on the counter and left. (I wasn't going to buy only half the stuff I needed.. and I was pretty sure I was never going to be buying ANYTHING at that particular location ever again.) Guess I'll be ordering more stuff online at this point. It's a shame really, because I used to LOVE going to Radio Shack as a kid, and looking through all the cool electronics components and stuff, even if I didnt understand what most of them were at the time. Seems like the only thing they carry in any quantity/variety now is cell phones and random stereo connectors.

  Read the article

• Create Auto Customization Criteria OAF Search Page

  - by PRajkumar

  1. Create a New Workspace and Project Right click Workspaces and click create new OAworkspace and name it as PRajkumarCustSearch. Automatically a new OA Project will also be created. Name the project as CustSearchDemo and package as prajkumar.oracle.apps.fnd.custsearchdemo   2. Create a New Application Module (AM) Right Click on CustSearchDemo > New > ADF Business Components > Application Module Name -- CustSearchAM Package -- prajkumar.oracle.apps.fnd.custsearchdemo.server   3. Enable Passivation for the Root UI Application Module (AM) Right Click on CustSearchAM > Edit SearchAM > Custom Properties > Name – RETENTION_LEVEL Value – MANAGE_STATE Click add > Apply > OK   4. Create Test Table and insert data some data in it (For Testing Purpose)   CREATE TABLE xx_custsearch_demo (   -- ---------------------     -- Data Columns     -- ---------------------     column1                  VARCHAR2(100),     column2                  VARCHAR2(100),     column3                  VARCHAR2(100),     column4                  VARCHAR2(100),     -- ---------------------     -- Who Columns     -- ---------------------     last_update_date    DATE         NOT NULL,     last_updated_by     NUMBER   NOT NULL,     creation_date          DATE         NOT NULL,     created_by               NUMBER   NOT NULL,     last_update_login   NUMBER  );   INSERT INTO xx_custsearch_demo VALUES('v1','v2','v3','v4',SYSDATE,0,SYSDATE,0,0); INSERT INTO xx_custsearch_demo VALUES('v1','v3','v4','v5',SYSDATE,0,SYSDATE,0,0); INSERT INTO xx_custsearch_demo VALUES('v2','v3','v4','v5',SYSDATE,0,SYSDATE,0,0); INSERT INTO xx_custsearch_demo VALUES('v3','v4','v5','v6',SYSDATE,0,SYSDATE,0,0); Now we have 4 records in our custom table   5. Create a New Entity Object (EO) Right click on SearchDemo > New > ADF Business Components > Entity Object Name – CustSearchEO Package -- prajkumar.oracle.apps.fnd.custsearchdemo.schema.server Database Objects -- XX_CUSTSEARCH_DEMO   Note – By default ROWID will be the primary key if we will not make any column to be primary key   Check the Accessors, Create Method, Validation Method and Remove Method   6. Create a New View Object (VO) Right click on CustSearchDemo > New > ADF Business Components > View Object Name -- CustSearchVO Package -- prajkumar.oracle.apps.fnd.custsearchdemo.server   In Step2 in Entity Page select CustSearchEO and shuttle them to selected list   In Step3 in Attributes Window select columns Column1, Column2, Column3, Column4, and shuttle them to selected list   In Java page deselect Generate Java file for View Object Class: CustSearchVOImpl and Select Generate Java File for View Row Class: CustSearchVORowImpl   7. Add Your View Object to Root UI Application Module Select Right click on CustSearchAM > Application Modules > Data Model Select CustSearchVO and shuttle to Data Model list   8. Create a New Page Right click on CustSearchDemo > New > Web Tier > OA Components > Page Name -- CustSearchPG Package -- prajkumar.oracle.apps.fnd.custsearchdemo.webui   9. Select the CustSearchPG and go to the strcuture pane where a default region has been created   10. Select region1 and set the following properties: ID -- PageLayoutRN Region Style -- PageLayout AM Definition -- prajkumar.oracle.apps.fnd.custsearchdemo.server.CustSearchAM Window Title – AutoCustomize Search Page Window Title – AutoCustomization Search Page Auto Footer -- True   11. Add a Query Bean to Your Page Right click on PageLayoutRN > New > Region Select new region region1 and set following properties ID – QueryRN Region Style – query Construction Mode – autoCustomizationCriteria Include Simple Panel – False Include Views Panel – False Include Advanced Panel – False   12. Create a New Region of style table Right Click on QueryRN > New > Region Using Wizard Application Module – prajkumar.oracle.apps.fnd.custsearchdemo.server.CustSearchAM Available View Usages – CustSearchVO1   In Step2 in Region Properties set following properties Region ID – CustSearchTable Region Style – Table   In Step3 in View Attributes shuttle all the items (Column1, Column2, Column3, Column4) available in “Available View Attributes” to Selected View Attributes: In Step4 in Region Items page set style to “messageStyledText” for all items   13. Select CustSearchTable in Structure Panel and set property Width to 100%   14. Include Simple Search Panel Right Click on QueryRN > New > simpleSearchPanel Automatically region2 (header Region) and region1 (MessageComponentLayout Region) created Set Following Properties for region2 Id – SimpleSearchHeader Text -- Simple Search   15. Now right click on message Component Layout Region (SimpleSearchMappings) and create two message text input beans and set the below properties to each   Message TextInputBean1 Id – SearchColumn1 Search Allowed – True Data Type – VARCHAR2 Maximum Length – CSS Class – OraFieldText Prompt – Column1   Message TextInputBean2 Id – SearchColumn2 Search Allowed -- True Data Type – VARCHAR2 Maximum Length – 100 CSS Class – OraFieldText Prompt – Column2   16. Now Right Click on query Components and create simple Search Mappings. Then automatically SimpleSearchMappings and QueryCriteriaMap1 created   17.  Now select the QueryCriteriaMap1 and set the below properties Id – SearchColumn1Map Search Item – SearchColumn1 Result Item – Column1   18. Now again right click on simpleSearchMappings -> New -> queryCriteriaMap, and then set the below properties Id – SearchColumn2Map Search Item – SearchColumn2 Result Item – Column2   19. Congratulation you have successfully finished Auto Customization Search page. Run Your CustSearchPG page and Test Your Work            

  Read the article

• Webcast Q&A: Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter

  - by kellsey.ruppel

  Last Thursday we had the second webcast in our WebCenter in Action webcast series, "Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter, where customer Michael Chander from Qualcomm and Vince Casarez & Gourav Goyal from Oracle Partner Keste shared how Oracle WebCenter is powering Qualcomm’s externally facing website and providing a seamless experience for their customers. In case you missed it, here's a recap of the Q&A.   Mike Chandler, Qualcomm Q: Did you run into any issues when integrating all of the different applications together?A: Definitely, our main challenges were in the area of user provisioning and security propagation, all the standard stuff you might expect when hooking up SSO for authentication and authorization. In addition, we spent several iterations getting the UI’s in sync. While everyone was given the same digital material to build too, each team interpreted and implemented it their own way. Initially as a user navigated, if you were looking for it, you could slight variations in color or font or width , stuff like that. So we had to pull all the developers responsible for the UI together and get pixel level agreement on a lot of things so we could ensure seamless transitions across applications. Q: What has been the biggest benefit your end users have seen?A: Wow, there have been several. An SSO enabled environment was huge a win for our users. The portal application that this replaced had not really been invested in by the business. With this project, we had full business participation and backing, and it really showed in some key areas like the shopping experience. For example, while ordering in the previous site, the items did not have any pictures or really usable descriptions. A tremendous amount of work was done to try and make the site more intuitive and user friendly. Site performance has also drastically improved thanks to new hardware, improved database design, and of course the fact that ADF has made great strides in runtime performance. Q: Was there any resistance internally when implementing the solution? If so, how did you overcome that?A: Within a large company, I’m sure there is always going to be competition for large projects, as there was here. Once we got through the technical analysis and settled on the technology choices, it was actually no resistance to implementing the solution. This project was fully driven by the business with the aim of long term growth. I can confidently say that the fact that this project was given the utmost importance by both the business and IT really help put down any resistance that you would typically see while implementing a new solution. Q: Given the performance, what do you estimate to be the top end capacity of the system? A:I think our top end capacity is really only limited by our hardware. I’m comfortable saying we could grow 10x on our current hardware, both in terms of transactions and users. We can easily spin up new JVM instances if needed. We already use less JVM’s than we had planned. In addition, ADF is doing a very good job with his connection pooling and application module pooling, so we see a very good ratio of users connected to the systems vs db connections, without impacting performace. Q: What's the overview or summary of feedback from the users interacting with the site?A: Feedback has been overwhelmingly positive from both the business and our customers. They’re very happy with the new SSO environment , the new LAF, and the performance of the site. Of course, it’s not all roses. No matter what, there are always going to be people that don’t like the layout or the color scheme, etc. By and large though, customers are happy and the business is happy. Q: Can you describe the impressions about the site before and after the project within Qualcomm?A: Before the project, the site worked and people were using it, but most people were not happy with it. It was slow and tended to be a bit tempermental, for example a user would perform a transaction and the system would throw and unexpected error. The user could back up and retry the steps and things would work fine, so why didn’t work the first time?. From a UI perspective, we’d hear comments like it looked like it was built by a high school student.  Vince Casarez & Gourav Goyal, Keste Q: Did you run into any obstacles when implementing the solution?A: It's interesting some people call them "obstacles" on this project we just called them "dependencies".  There were both technical and business related dependencies that we had to work out. Mike points out the SSO dependencies and the coordination and synchronization between the teams to have a seamless login experience and a seamless end user experience.  There was also a set of dependencies on the User Acceptance testing to make sure that everyone understood the use cases for how the system would be used.  With a branching into a new market and trying to match a simple user experience as many consumer sites have today, there was always a tendency for the team members to provide their suggestions on how things could be simpler.  But with all the work up front on the user design and getting the business driving this set of experiences, this minimized the downstream suggestions that tend to distract a team.  In this case, all the work up front allowed us to enumerate the "dependencies" and keep the distractions to a minimum. Q: Was there a lot of custom work that needed to be done for this particular solution?A: The focus for this particular solution was really on the custom processes. The interesting thing is that with the data flows and the integration with applications, there are some pre-built integrations, but realistically for the process flow, we had to build those. The framework and tooling we used made things easier so we didn’t have to implement core functionality, like transitioning from screen to screen or from flow to flow. The design feature of Task Flows really helped speed the development and keep the component infrastructure in line with the dynamic processes.  Task flows and other elements like Skins are core to the infrastructure or technology stack of Oracle. This then allowed the team to center the project focus around the business flows and use cases to meet the core requirements and keep the project on time. Q: What do you think were the keys to success for rolling out WebCenter?A:  The 5 main keys to success were: 1) Sponsorship from the whole organization around this project from senior executive agreement, business owners driving functionality, and IT development alignment; 2) Upfront design planning and use case definition to clearly define the project scope and requirements; 3) Focussed development and project management aligned with the top level goals and drivers; 4) User acceptance and usability testing along the way to identify potential issues and direct resolution of the issues;  and 5) Constant prioritization of the issues for development to fix by the business.  It also helps to have great team chemistry and really smart people working on the project. If you missed the webcast, be sure to catch the replay to see a live demonstration of WebCenter in action!  Qualcomm Provides a Seamless Experience for Customers with Oracle WebCenter from Oracle WebCenter

  Read the article

• How can I convince IE to honor my explicit instructions to make a table column X pixels wide? [migrated]

  - by AnthonyWJones

  Please consider this small but complete chunk of HTML: <!DOCTYPE html > <html> <head> <title>Test</title> <style type="text/css"> span {overflow:hidden; white-space:nowrap; } td {overflow:hidden; text-overflow:ellipsis} </style> </head> <body> <table cellspacing="0" > <tbody> <tr> <td nowrap="nowrap" style="max-width:30px; width:30px; white-space:nowrap; "><span>column 1</span></td> <td nowrap="nowrap" style="max-width:30px; width:30px; white-space:nowrap; "><span>column 2</span></td> <td nowrap="nowrap" style="max-width:30px; width:30px; white-space:nowrap; "><span>column 3</span></td> </tr> </tbody> </table> </body> </html> If you render the above in Chrome you'll see the effect I'm looking for. However render it in IE8 or 9 the width and/or max-width is ignored. So my question is how do get IE to simply let me specify the width of a cell explicitly? BTW, I've tried various combinations of table-layout:fixed and using colgroup with cols and all sorts, nothing I've tried convinces IE to what I'm clearly asking it to explicitly do? If I had any hair before starting this I wouldn't have any left by now.

  Read the article

• Good Customer Service Example

  - by MightyZot

  Here’s another good customer service example for you! My wife purchased a Galaxy last week and she loves the phone.  She asked me to add it to our AT&T Microcell last night. I purchased the AT&T Microcell a couple of years ago, because cell signal out where I live sucks! Since microcells are managed on the AT&T web site, I went to the site and tried to sign in. Naturally, having not managed that microcell in a couple of years…and much to my chagrin…I discovered that I didn’t know my password OR my user ID. So, I decided to call and see if I could get my account reset that late in the day (we’re talking last night, so it was well after 7pm.) I called the technical support line, touched the appropriate numbers to navigate to microcell support, turned on my speaker phone, and prepared for the long wait. After about 45 seconds I was delighted to hear “Jeffrey” break in and ask what he could help me with. I explained that I have not managed my microcell for some time and had forgotten the user name and password.  “No problem”, he replied, and he asked me for the line I used to register the microcell. After confirming the last four digits of my IMEI number, he asked me for my wife’s number. I gave him my wife’s number and he said, “I’ve taken care of it Mr Pope. Just have her reboot her phone and you should see your microcell.” We rebooted her phone, it connected to the microcell, and voila, she was online! “Is there anything else I can help you with while I’ve got you on the line”, he said. “Nope”, I replied. “Ok, have a great night.” What made this a great customer service experience for me was that “Jeffrey” didn’t stop at giving me my user account and password, which I would probably forget anyway after setting up my wife’s new phone. Instead, he solved the real problem for me – adding my wife’s new phone to my microcell. Great job Jeffrey!

  Read the article

• Office 2010 Professional Plus (Top 10 reasons to upgrade)

  - by mbcrump

  Being a huge nerd, I decided that I would go ahead and upgrade to the latest and greatest office. That being, Office 2010 Professional Plus. The biggest concern that I had was loosing all my mail settings from Outlook 2007. Thankfully, it upgrade gracefully and worked like a charm. So lets start this top 10 list. 1) You can upgrade without fear of loosing all your stuff! As you can tell by the screenshot below, you can select what you want to do. I selected to remove all previous versions.    2) Outlook conversations: Just like GMail, you can now group emails by conversations. This is simply awesome and a must have. 3) The ability to ignore conversations. If you are on a email thread that has nothing to do with you. Simply “ignore” the conversation and all emails go into the deleted folder. 4) Quick Steps, do you send an email to the same team member or group constantly. With quick steps, its just one click away. 5) Spell check in the Subject line! 6)  Easier Screenshots, built in just click the button. No more ALT-Printscreen for those that are not aware of the awesome SnagIT 10 that's out. 7) Open in protected view. When you open a document from an email attachment, it lets you know the file may be unsafe. You can click a button to enable editing. This is great for preventing macros.       8) Excel has always had a variety of charts and graphs available to visually depict data and trends. With Excel 2010, though, Microsoft has added a new feature called Sparklines, which allows you to place a mini-graph or trend line in a single cell. The Sparklines are a cool way to quickly and simply add a visual element without having to go through the effort of inserting a graph or chart that overwhelms the worksheet. 9) Contact actions. If you hover over a name in the form or fields on an email, you get a popup giving you several actions you can perform on the person such as adding them to your Outlook contacts, scheduling a meeting, viewing their stored contact information if they are already in your contacts, sending an instant message or even starting a telephone call. 10) Windows 7 Task Bar Context Menu – I love the jumplist. I don’t know how much that I would actually use it but it just rocks.

  Read the article

• Correct way to handle path-finding collision matrix

  - by Xander Lamkins

  Here is an example of me utilizing path finding. The red grid represents the grid utilized by my A* library to locate a distance. This picture is only an example, currently it is all calculated on the 1x1 pixel level (pretty darn laggy). I want to make it so that the farther I click, the less accurate it will be (split the map into larger grid pieces). Edit: as mentioned by Eric, this is not a required game mechanic. I am perfectly fine with any method that allows me to make this accurate while still fast. This isn't the really the topic of this question though. The problem I have is, my current library uses a two dimensional grid of integers. The higher the number in a cell, the more resistance for that grid tile. Currently I'm setting all unwalkable spots to Integer Max. Here is an example of what I want: I'm just not sure how I should set up the arrays of integers of the grid. Every time an element is added/removed to/from the game, it's collision details are updated in the table. Here is a picture of what the map looks like on my collision layer: I probably shouldn't be creating new arrays every time I have to do a path find because my game needs to support tons of PF at the same time. Should I have multiple arrays that are all updated when the dynamic elements are updated (a building is built/a building is destroyed). The problem I see with this is that it will probably make the creation and destruction of buildings a little more laggy than I would want because it would be setting the collision grid for each built in accuracy level. I would also have to add more/remove some arrays if I ever in the future changed the map size. Should I generate the new array based on an accuracy value every time I need to PF? The problem I see with this is that it will probably make any form of PF just as laggy because it will have to search through a MapWidth x MapHeight number of cells to shrink it all down. Or is there a better way? I'm certainly not the best at optimizing really anything. I've just started dealing with XNA so I'm not used to having optimization code really doing much of an affect until now... :( If you need code examples, please ask. I'll add it as an edit. EDIT: While this doesn't directly relate to the question, I figure the more information I provide, the better. To keep your units from moving as accurately to the players desired position, I've decided that once the unit PFs over to the less accurate grid piece, it will then PF on a more accurate level to the exact position requested.

  Read the article

• Hosting and consuming WCF services without configuration files

  - by martinsj

  In this post, I'll demonstrate how to configure both the host and the client in code without the need for configuring services i the <system.serviceModel> section of the config-file. In fact, you don't need a  <system.serviceModel> section at all. What you'll do need (and want) sometimes, is the Uri of the service in the configuration file. Configuring the Uri of the the service is actually only needed for the client or when self-hosting, not when hosting in IIS. So, exactly What do we need to configure? The binding type and the binding constraints The metadata behavior Debug behavior You can of course configure even more, and even more if you want to, WCF is after all the king of configuration… As an example I'll be hosting and consuming a service that removes most of the default constraints for WCF-services, using a BasicHttpBinding. Of course, in regards to security, it is probably better to have some constraints on the server, but this is only a demonstration. The ServerConfig class in the code beneath is a static helper class that will be used in the examples. In this post, I’ll be using this helper-class for all configuration, for both the server and the client. In WCF, the  client and the server have both their own WCF-configuration. With this piece of code, they will be sharing the same configuration. 1: public static class ServiceConfig 2: { 3: public static Binding DefaultBinding 4: { 5: get 6: { 7: var binding = new BasicHttpBinding(); 8: Configure(binding); 9: return binding; 10: } 11: } 12:  13: public static void Configure(HttpBindingBase binding) 14: { 15: if (binding == null) 16: { 17: throw new ArgumentException("Argument 'binding' cannot be null. Cannot configure binding."); 18: } 19:  20: binding.SendTimeout = new TimeSpan(0, 0, 30, 0); // 30 minute timeout 21: binding.MaxBufferSize = Int32.MaxValue; 22: binding.MaxBufferPoolSize = 2147483647; 23: binding.MaxReceivedMessageSize = Int32.MaxValue; 24: binding.ReaderQuotas.MaxArrayLength = Int32.MaxValue; 25: binding.ReaderQuotas.MaxBytesPerRead = Int32.MaxValue; 26: binding.ReaderQuotas.MaxDepth = Int32.MaxValue; 27: binding.ReaderQuotas.MaxNameTableCharCount = Int32.MaxValue; 28: binding.ReaderQuotas.MaxStringContentLength = Int32.MaxValue; 29: } 30:  31: public static ServiceMetadataBehavior ServiceMetadataBehavior 32: { 33: get 34: { 35: return new ServiceMetadataBehavior 36: { 37: HttpGetEnabled = true, 38: MetadataExporter = {PolicyVersion = PolicyVersion.Policy15} 39: }; 40: } 41: } 42:  43: public static ServiceDebugBehavior ServiceDebugBehavior 44: { 45: get 46: { 47: var smb = new ServiceDebugBehavior(); 48: Configure(smb); 49: return smb; 50: } 51: } 52:  53:  54: public static void Configure(ServiceDebugBehavior behavior) 55: { 56: if (behavior == null) 57: { 58: throw new ArgumentException("Argument 'behavior' cannot be null. Cannot configure debug behavior."); 59: } 60: 61: behavior.IncludeExceptionDetailInFaults = true; 62: } 63: } Configuring the server There are basically two ways to host a WCF service, in IIS and self-hosting. When hosting a WCF service in a production environment using SOA architecture, you'll be most likely hosting it in IIS. When testing the service in integration tests, it's very handy to be able to self-host services in the unit-tests. In fact, you can share the the WCF configuration for self-hosted services and services hosted in IIS. And that is exactly what you want to do, testing the same configurations for test and production environments.   Configuring when Self-hosting When self-hosting, in order to start the service, you'll have to instantiate the ServiceHost class, configure the  service and open it. 1: // Create the service-host. 2: var host = new ServiceHost(typeof(MyService), endpoint); 3:  4: // Configure the binding 5: host.AddServiceEndpoint(typeof(IMyService), ServiceConfig.DefaultBinding, endpoint); 6:  7: // Configure metadata behavior 8: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 9:  10: // Configure debgug behavior 11: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 12: 13: // Start listening to the service 14: host.Open(); 15:  Configuring when hosting in IIS When you create a WCF service application with the wizard in Visual Studio, you'll end up with bits and pieces of code in order to get the service running: Svc-file with codebehind. A interface to the service Web.config In order to get rid of the configuration in the <system.serviceModel> section, which the wizard has generated for us, we must tell the service that we have a factory that will create the service for us. We do this by changing the markup for the svc-file: 1: <%@ ServiceHost Language="C#" Debug="true" Service="Namespace.MyService" Factory="Namespace.ServiceHostFactory" %> The markup tells IIS that we have a factory called ServiceHostFactory for this service. The service factory has a method we can override which will be called when someone asks IIS for the service. There are overloads we can override: 1: System.ServiceModel.ServiceHostBase CreateServiceHost(string constructorString, Uri[] baseAddresses) 2: System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 3:  In this example, we'll be using the last one, so our implementation looks like this: 1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3:  4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12:  1: public class ServiceHostFactory : System.ServiceModel.Activation.ServiceHostFactory 2: { 3: 4: protected override System.ServiceModel.ServiceHost CreateServiceHost(Type serviceType, Uri[] baseAddresses) 5: { 6: var host = base.CreateServiceHost(serviceType, baseAddresses); 7: host.Description.Behaviors.Add(ServiceConfig.ServiceMetadataBehavior); 8: ServiceConfig.Configure((ServiceDebugBehavior)host.Description.Behaviors[typeof(ServiceDebugBehavior)]); 9: return host; 10: } 11: } 12: As you can see, we are using the same configuration helper we used when self-hosting. Now, when you have a factory, the <system.serviceModel> section of the configuration can be removed, because the section will be ignored when the service has a custom factory. If you want to configure something else in the config-file, one could configure in some other section.   Configuring the client Microsoft has helpfully created a ChannelFactory class in order to create a proxy client. When using this approach, you don't have generate those awfull proxy classes for the client. If you share the contracts with the server in it's own assembly like in the layer diagram under, you can share the same piece of code. The contracts in WCF are the interface to the service and if any, the datacontracts (custom types) the service depends on. Using the ChannelFactory with our configuration helper-class is very simple: 1: var identity = EndpointIdentity.CreateDnsIdentity("localhost"); 2: var endpointAddress = new EndpointAddress(endPoint, identity); 3: var factory = new ChannelFactory<IMyService>(DeployServiceConfig.DefaultBinding, endpointAddress); 4: using (var myService = new factory.CreateChannel()) 5: { 6: myService.Hello(); 7: } 8: factory.Close();   Happy configuration!

  Read the article

• SQL: empty string vs NULL value

  - by Jacek Prucia

  I know this subject is a bit controversial and there are a lot of various articles/opinions floating around the internet. Unfortunatelly, most of them assume the person doesn't know what the difference between NULL and empty string is. So they tell stories about surprising results with joins/aggregates and generally do a bit more advanced SQL lessons. By doing this, they absolutely miss the whole point and are therefore useless for me. So hopefully this question and all answers will move subject a bit forward. Let's suppose I have a table with personal information (name, birth, etc) where one of the columns is an email address with varchar type. We assume that for some reason some people might not want to provide an email address. When inserting such data (without email) into the table, there are two available choices: set cell to NULL or set it to empty string (''). Let's assume that I'm aware of all the technical implications of choosing one solution over another and I can create correct SQL queries for either scenario. The problem is even when both values differ on the technical level, they are exactly the same on logical level. After looking at NULL and '' I came to a single conclusion: I don't know email address of the guy. Also no matter how hard i tried, I was not able to sent an e-mail using either NULL or empty string, so apparently most SMTP servers out there agree with my logic. So i tend to use NULL where i don't know the value and consider empty string a bad thing. After some intense discussions with colleagues i came with two questions: am I right in assuming that using empty string for an unknown value is causing a database to "lie" about the facts? To be more precise: using SQL's idea of what is value and what is not, I might come to conclusion: we have e-mail address, just by finding out it is not null. But then later on, when trying to send e-mail I'll come to contradictory conclusion: no, we don't have e-mail address, that @!#$ Database must have been lying! Is there any logical scenario in which an empty string '' could be such a good carrier of important information (besides value and no value), which would be troublesome/inefficient to store by any other way (like additional column). I've seen many posts claiming that sometimes it's good to use empty string along with real values and NULLs, but so far haven't seen a scenario that would be logical (in terms of SQL/DB design). P.S. Some people will be tempted to answer, that it is just a matter of personal taste. I don't agree. To me it is a design decision with important consequences. So i'd like to see answers where opion about this is backed by some logical and/or technical reasons.

  Read the article

• Is MongoDB a good choice or not for my application?

  - by shubham

  I have a Reporting application which stores the reports in xml format as recieved from source (XML schema is not defined, it can be any format) and those reports contain some keys and values. Like jobid, setid be keys for 1 type of report and userid, groupId for another type of report etc. The type of keys that can be referred from the document is determined by the namespaces used in the xml doc. These keys are stored on the basis of namespace used in the xml document. For e.g. If a tag in xml fragment uses namespace= "myspace1", then I have keys A and B for myspace1 stored in another table. It will fetch those keys from that table for this namespace, look for their values in xml doc and store it in another table along with the pointer to this xml document (Id of a record storing complete xml document in a cell). Use cases: When the user comes and queries for that key and value, I return the document or a set of documents that are having those key/value pairs. When the user comes and queries for a certain key and provide a name for xslt (pre stored), I fetch the set of documents fulfilling that criteria and convert that xml to html with the specified xslt. When the user comes and asks for a particular fragment of a doc then it can fetch a subset from a particular document also. When the user comes and queries for top x values of a certain key, I return the set of documents that are having top 10 values of that key. I am using DB2 database for its support of xml along with relational capabilities. That makes easier for me to run xpath expressions and fetch values of keys and also aggregate a set of documents fullfilling a criteria, all on the database side. Problems: DB2 stores XML doc of upto 2GB in size. Retrieval is very slow. If some thing involves many documents, then it takes significant time for things to show up in browser, and the user has to wait. Can MongoDb help in this case, as it is document oriented? can I do xml related xpath queries and document transformations on db side? Or is it ok to use both in such a case?

  Read the article

• Creating a frozen bubble clone

  - by Vaughan Hilts

  This photo illustrates the environment: http://i.imgur.com/V4wbp.png I'll shoot the cannon, it'll bounce off the wall and it's SUPPOSED to stick to the bubble. It does at pretty much every other angle. The problem is always reproduced here, when hit off the wall into those bubbles. It also exists in other cases, but I'm not sure what triggers it. What actually happens: The ball will sometimes set to the wrong cell, and my "dropping" code will detect it as a loner and drop it off the stage. *There are many implementations of "Frozen Bubble" on the web, but I can't for the life of me find a good explanation as to how the algorithm for the "Bubble Sticking" works. * I see this: http://www.wikiflashed.com/wiki/BubbleBobble https://frozenbubblexna.svn.codeplex.com/svn/FrozenBubble/ But I can't figure out the algorithims... could anyone explain possibly the general idea behind getting the balls to stick? Code in question: //Counstruct our bounding rectangle for use var nX = currentBall.x + ballvX * gameTime; var nY = currentBall.y - ballvY * gameTime; var movingRect = new BoundingRectangle(nX, nY, 32, 32); var able = false; //Iterate over the cells and draw our bubbles for (var x = 0; x < 8; x++) { for (var y = 0; y < 12; y++) { //Get the bubble at this layout var bubble = bubbleLayout[x][y]; var rowHeight = 27; //If this slot isn't empty, draw if (bubble != null) { var bx = 0, by = 0; if (y % 2 == 0) { bx = x * 32 + 270; by = y * 32 + 45; } else { bx = x * 32 + 270 + 16; by = y * 32 + 45; } //Check var targetBox = new BoundingRectangle(bx, by, 32, 32); if (targetBox.intersects(movingRect)) { able = true; } } } } cellY = Math.round((currentBall.y - 45) / 32); if (cellY % 2 == 0) cellX = Math.round((currentBall.x - 270) / 32); else cellX = Math.round((currentBall.x - 270 - 16) / 32); Any ideas are very much welcome. Things I've tried: Flooring and Ceiling values Changing the wall bounce to a lower value Slowing down the ball None of these seem to affect it. Is there something in my math I'm not getting?

  Read the article

• CES 2011–Microsoft Keynote Impressions

  - by guybarrette

  Microsoft has been kicking off the CES for a number of years by doing a keynote the evening of the event first day.  This year, SteveB talked about Xbox, Kinect, Windows 7 new laptops, Surface 2 and Windows vNext running on the ARM architecture. Some of the design of the new laptops showed are quite amazing.  This one has a dual screen with no physical keyboard.  The image is split between both screens.  A software keyboard appears when you place your 10 fingers on the lower screen. This one from Samsung has a sliding keyboard somewhat like numerous cell phones have. What I found the most amazing is that Intel was able to miniaturized a full Intel architecture (CPU, motherboard, memory) in a tiny form factor.  Imagine having the power of a full PC running .NET apps in a Zune/iPod form factor! They also showed V2 of the Surface device.  This one is called the Samsung SUR40 for Surface PC.  It’s much sleeker and it will likely loose the BAT (Big Ass Table) moniker  More info here SteveB announced that Windows vNext will run on ARM chips.  I’m intrigued by this announcement (you can read about it here) and I have many questions: -In the past ARM devices were slow, what now makes the ARM architecture able to run Windows? -ARM is 32-bit only, I think. -Does this mean that Intel wasn't able to provide such a lightweight architecture or simply that they weren't interested? -From what I understand, apps would need to be recompiled for ARM. Will we need to do that from an ARM PC or could it be done natively on Intel or on an Intel PC running in an ARM VM?  VS 2012? Ahhhh, smells like a cool PDC is coming up    Clearly it looks like PC have enough power for most of us right now and that the race is now about miniaturization, power consumption and battery life. You can watch the Microsoft CES 2011 keynote here var addthis_pub="guybarrette";

  Read the article

• As the current draft stands, what is the most significant change the "National Strategy for Trusted Identities in Cyberspace" will provoke?

  - by mfg

  A current draft of the "National Strategy for Trusted Identities in Cyberspace" has been posted by the Department of Homeland Security. This question is not asking about privacy or constitutionality, but about how this act will impact developers' business models and development strategies. When the post was made I was reminded of Jeff's November blog post regarding an internet driver's license. Whether that is a perfect model or not, both approaches are attempting to handle a shared problem (of both developers and end users): How do we establish an online identity? The question I ask here is, with respect to the various burdens that would be imposed on developers and users, what are some of the major, foreseeable implementation issues that will arise from the current U.S. Government's proposed solution? For a quick primer on the setup, jump to page 12 for infrastructure components, here are two stand-outs: An Identity Provider (IDP) is responsible for the processes associated with enrolling a subject, and establishing and maintaining the digital identity associated with an individual or NPE. These processes include identity vetting and proofing, as well as revocation, suspension, and recovery of the digital identity. The IDP is responsible for issuing a credential, the information object or device used during a transaction to provide evidence of the subject’s identity; it may also provide linkage to authority, roles, rights, privileges, and other attributes. The credential can be stored on an identity medium, which is a device or object (physical or virtual) used for storing one or more credentials, claims, or attributes related to a subject. Identity media are widely available in many formats, such as smart cards, security chips embedded in PCs, cell phones, software based certificates, and USB devices. Selection of the appropriate credential is implementation specific and dependent on the risk tolerance of the participating entities. Here are the first considered actionable components of the draft: Action 1: Designate a Federal Agency to Lead the Public/Private Sector Efforts Associated with Achieving the Goals of the Strategy Action 2: Develop a Shared, Comprehensive Public/Private Sector Implementation Plan Action 3:Accelerate the Expansion of Federal Services, Pilots, and Policies that Align with the Identity Ecosystem Action 4:Work Among the Public/Private Sectors to Implement Enhanced Privacy Protections Action 5:Coordinate the Development and Refinement of Risk Models and Interoperability Standards Action 6: Address the Liability Concerns of Service Providers and Individuals Action 7: Perform Outreach and Awareness Across all Stakeholders Action 8: Continue Collaborating in International Efforts Action 9: Identify Other Means to Drive Adoption of the Identity Ecosystem across the Nation

  Read the article

• Wireless connection by using command screen

  - by Amadeus

  I installed Ubuntu 12.04 armhf to my beagleboard-xm and now trying to connect to a wireless network. First, I checked if I can search for available networks: ubuntu@arm:~$ iwlist scan lo Interface doesn't support scanning. usb0 Interface doesn't support scanning. wlan0 Scan completed : Cell 01 - Address: EA:7D:EF:60:C9:0B Channel:1 Frequency:2.412 GHz (Channel 1) Quality=70/70 Signal level=-23 dBm Encryption key:on ESSID:"ghostrider" Bit Rates:1 Mb/s; 2 Mb/s; 5.5 Mb/s; 11 Mb/s; 18 Mb/s 24 Mb/s; 36 Mb/s; 54 Mb/s Bit Rates:6 Mb/s; 9 Mb/s; 12 Mb/s; 48 Mb/s Mode:Ad-Hoc Extra:tsf=000000005a1ab50e Extra: Last beacon: 6242ms ago IE: Unknown: 000A67686F73747269646572 IE: Unknown: 010882848B962430486C IE: Unknown: 030101 IE: Unknown: 06020000 IE: Unknown: 2A0100 IE: Unknown: 2F0100 IE: Unknown: 32040C121860 IE: Unknown: 2D1A2C181BFF00000000000000000000000000000000000000000000 IE: Unknown: 3D16010800000000FF000000000000000000000000000000 IE: Unknown: DD09001018020000000000 Then I edited /etc/network/interfaces file to the following: root@arm:/etc/wpa_supplicant# cat /etc/network/interfaces auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet dhcp # Example to keep MAC address between reboots #hwaddress ether DE:AD:BE:EF:CA:FE # WiFi Example auto wlan0 iface wlan0 inet dhcp wpa-ssid "ghostrider" wpa-psk "b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf" But I cannot still connect to the wireless network: root@arm:/etc/wpa_supplicant# iwconfig lo no wireless extensions. usb0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Asociated Tx-Power=20 dBm Retry long limit:7 RTS thr:off Fragment thr:off Encryption key:off Power Management:on eth0 no wireless extensions. root@arm:/etc/network# ifup wlan0 Failed to bring up wlan0. What is wrong? Should I change any other files also? But I think it was enough. By the way if you are curious about where that wpa-psk came from: zero@ghostrider:~$ wpa_passphrase ghostrider 34bddf67c2 network={ ssid="ghostrider" #psk="34bddf67c2" psk=b34d373eb2fb836a43b0afffe783c7d0af694724506c9e77b06d1021302905bf } I will appreciate any effort to help. Regards, Amadeus ps: Also I tried to connect manually: root@arm:/etc/network# iwconfig wlan0 essid ghostrider key s:34bddf67c2 But this did not solve my problem also.

  Read the article

• Curating projects of deceased friends

  - by Ant

  A very good friend of mine, and an avid programmer, recently passed away. He left nearly 40 projects on BitBucket. Most of them are public, but a few of them are marked as private. I've decided to take on curation duties for the projects rather than leave his work to disappear. If you have been in the same situation, what did you do? Did you open-source everything? Continue development? Delete it all? I'm very interested to hear other people's experiences. There are a few reasons why some of the projects are marked as private (private projects on BitBucket are visible only to invited users and the original creator): One of them is an iOS web app that was free in the app store. I've had to remove the app from the store as I'm shutting down his web sites as a favour to his widow. However, I've already made the app public under the GPL v3 (he was a big GPL supporter). One of them contains proprietary code. It can't be open-sourced. Others are very much work-in-progress. I don't know if he intended to make them into hosted, paid services or if he wanted to give the code away under an open-source licence when they were finished. Here's a list of the private projects: Some kind of living cell simulator that uses SBML along with Runge-Kutta and Euler algorithms to do... something. There's a fair amount of code here but I don't know what it does or how far along it is. No docs. An accountacy application; it seems to have a solid DB design behind it but there's little code on top of that. A website whose purpose is to suggest good restaurants. Built on yii. Seems to have a lot of code but I'd need to set up a WAMP stack to see how far along it is. A website intended to host memorials to people who suffered from the same problem he was. Built on Joomla. I'm not sure how much of the code is just Joomla and how much is custom; again, I'd need to get Joomla running to find out. I'd just introduced him to Mercurial and BitBucket. All of the private projects are single commits of codebases he wasn't using version control with/was previously using SVN. I don't have the SVN repositories so I can't see the commit logs.

  Read the article

• LibGDX - Textures rendering at wrong position

  - by ACluelessGuy

  Update 2: Let me further explain my problem since I think that i didn't make it clear enough: The Y-coordinates on the bottom of my screen should be 0. Instead it is the height of my screen. That means the "higher" i touch/click the screen the less my y-coordinate gets. Above that the origin is not inside my screen, atleast not the 0 y-coordinate. Original post: I'm currently developing a tower defence game for fun by using LibGDX. There are places on my map where the player is or is not allowed to put towers on. So I created different ArrayLists holding rectangles representing a tile on my map. (towerPositions) for(int i = 0; i < map.getLayers().getCount(); i++) { curLay = (TiledMapTileLayer) map.getLayers().get(i); //For all Cells of current Layer for(int k = 0; k < curLay.getWidth(); k++) { for(int j = 0; j < curLay.getHeight(); j++) { curCell = curLay.getCell(k, j); //If there is a actual cell if(curCell != null) { tileWidth = curLay.getTileWidth(); tileHeight = curLay.getTileHeight(); xTileKoord = tileWidth*k; yTileKoord = tileHeight*j; switch(curLay.getName()) { //If layer named "TowersAllowed" picked case "TowersAllowed": towerPositions.add(new Rectangle(xTileKoord, yTileKoord, tileWidth, tileHeight)); // ... AND SO ON If the player clicks on a "allowed" field later on he has the opportunity to build a tower of his coice via a menu. Now here is the problem: The towers render, but they render at wrong position. (They appear really random on the map, no certain pattern for me) for(Rectangle curRect : towerPositions) { if(curRect.contains(xCoord, yCoord)) { //Using a certain tower in this example (left the menu out if(gameControl.createTower("towerXY")) { //RenderObject is just a class holding the Texture and x/y coordinates renderList.add(new RenderObject(new Texture(Gdx.files.internal("TowerXY.png")), curRect.x, curRect.y)); } } } Later on i render it: game.batch.begin(); for(int i = 0; i < renderList.size() ; i++) { game.batch.draw(renderList.get(i).myTexture, renderList.get(i).x, renderList.get(i).y); } game.batch.end(); regards

  Read the article

• what would be a good way to implement/render a 2d tiled map for a browser game?

  - by jj_

  I've made this little rpg ruby game I did while learning and now I'd like to make it into a browser game. I've already set up Sinatra framework to serve it, so what I am looking for, before everything else, is a way to represent the game map in browser (location attributes are stored in db). A new map is randomly generated by code for each new game at each game start. For now forget db, and let's say a map (say 100x100 "squares") is stored as a tridimensional array. (x,y, ...) Last "dimension" of array stores who & what is at that map cell: a player, a building, whatever. So all I have to do is render those "squares" or array cells to a 2d tiled map in the browser. The map does not need to refresh or be dynamically fetched as you scroll it, (at least at this stage of development) but, a technology which would allow me to do so in future would be a good reason for choosing it. Things that I thought of: html tables, html5 canvas, some js framework which is designed exactly with this purpose (which I do not know of = please advice). Yes I know about gamequery-js framework, but I've never used it, and I don't know if it's going to slow down everything down to inusability as I'm adding new features (scrolling, ajax). I really don't know of any other alternatives.. maybe there are lighter approaches? Easier or more minimalistic ways ? More targeted js framework which is the right tool for the job? Maybe just some html canvas code, or even simple image maps, or images with absolute positioning will be enough? The thing is I'd like to start simple, and then gradually make it better, so, as I said before, I'd prefer something that will give me room for improvement or is headed toward new web tendencies but which will also give me a bit of gratification in the beginning :) So.. advices are needed! And appreciated! :) Thanks p.s. Flash is excluded because I don't like it.

  Read the article

• where is this function getting its values from

  - by user295189

  I have the JS file below that I am working on and I have a need to know this specific function pg.getRecord_Response = function(){ } within the file. I need to know where are the values are coming from in this function for example arguments[0].responseText? I am new to javascript so any help will be much appreciated. Thanks var pg = new Object(); var da = document.body.all; // ===== - EXPRESS BUILD [REQUEST] - ===== // pg.expressBuild_Request = function(){ var n = new Object(); n.patientID = request.patientID; n.encounterID = request.encounterID; n.flowSheetID = request.flowSheetID; n.encounterPlan = request.encounterPlan; n.action = "/location/diagnosis/dsp_expressBuild.php"; n.target = popWinCenterScreen("/common/html/empty.htm", 619, 757, ""); myLocationDB.PostRequest(n); } // ===== - EXPRESS BUILD [RESPONSE] - ===== // pg.expressBuild_Response = function(){ pg.records.showHiddenRecords = 0; pg.loadRecords_Request(arguments.length ? arguments[0] : 0); } // ===== - GET RECORD [REQUEST] - ===== // pg.getRecord_Request = function(){ if(pg.records.lastSelected){ pg.workin(true); pg.record.recordID = pg.records.lastSelected.i; var n = new Object(); n.noheaders = 1; n.recordID = pg.record.recordID; myLocationDB.Ajax.Post("/location/diagnosis/get_record.php", n, pg.getRecord_Response); } else { pg.buttons.btnOpen.disable(true); } } // ===== - GET RECORD [RESPONSE] - ===== // pg.getRecord_Response = function(){ //alert(arguments[0].responseText); if(arguments.length && arguments[0].responseText){ alert(arguments[0].responseText); // Refresh PQRI grid when encounter context if(request.encounterID && window.parent.frames['main']){ window.parent.frames['main'].pg.loadQualityMeasureRequest(); } var rec = arguments[0].responseText.split(pg.delim + pg.delim); if(rec.length == 20){ // validate record values rec[0] = parseInt(rec[0]); rec[3] = parseInt(rec[3]); rec[5] = parseInt(rec[5]); rec[6] = parseInt(rec[6]); rec[7] = parseInt(rec[7]); rec[8] = parseInt(rec[8]); rec[9] = parseInt(rec[9]); rec[10] = parseInt(rec[10]); rec[11] = parseInt(rec[11]); rec[12] = parseInt(rec[12]); rec[15] = parseInt(rec[15]); // set record state pg.recordState = { recordID: pg.record.recordID, codeID: rec[0], description: rec[2], assessmentTypeID: rec[3], type: rec[4], onsetDateYear: rec[5], onsetDateMonth: rec[6], onsetDateDay: rec[7], onsetDateIsApproximate: rec[8], resolveDateYear: rec[9], resolveDateMonth: rec[10], resolveDateDay: rec[11], resolveDateIsApproximate: rec[12], commentsCount: rec[15], comments: rec[16] } // set record view pg.record.code.codeID = pg.recordState.codeID; pg.record.code.value = rec[1]; pg.record.description.value = rec[2]; for(var i=0; i<pg.record.type.options.length; i++){ if(pg.record.type.options[i].value == rec[4]){ pg.record.type.selectedIndex = i; break; } } for(var i=0; i<pg.record.assessmentType.options.length; i++){ if(pg.record.assessmentType.options[i].value == rec[3]){ pg.record.assessmentType.selectedIndex = i; break; } } if(rec[5]){ if(rec[6] && rec[7]){ pg.record.onsetDateType.selectedIndex = 0; pg.record.onsetDate.value = rec[6] + "/" + rec[7] + "/" + rec[5]; pg.record.onsetDate.format(); } else { pg.record.onsetDateType.selectedIndex = 1; pg.record.onsetDateMonth.selectedIndex = rec[6]; for(var i=0; i<pg.record.onsetDateYear.options.length; i++){ if(pg.record.onsetDateYear.options[i].value == rec[5]){ pg.record.onsetDateYear.selectedIndex = i; break; } } if(rec[8]) pg.record.chkOnsetDateIsApproximate.checked = true; } } else { pg.record.onsetDateType.selectedIndex = 2; } if(rec[9]){ if(rec[10] && rec[11]){ pg.record.resolveDateType.selectedIndex = 0; pg.record.resolveDate.value = rec[10] + "/" + rec[11] + "/" + rec[9]; pg.record.resolveDate.format(); } else { pg.record.resolveDateType.selectedIndex = 1; pg.record.resolveDateMonth.selectedIndex = rec[10]; for(var i=0; i<pg.record.resolveDateYear.options[i].length; i++){ if(pg.record.resolveDateYear.options.value == rec[9]){ pg.record.resolveDateYear.selectedIndex = i; break; } } if(rec[12]) pg.record.chkResolveDateIsApproximate.checked = true; } } else { pg.record.resolveDateType.selectedIndex = 2; } pg.record.lblCommentCount.innerHTML = rec[15]; pg.record.comments.value = rec[16]; pg.record.lblUpdatedBy.innerHTML = "* Last updated by " + rec[13] + " on " + rec[14]; pg.record.lblUpdatedBy.title = "Updated by: " + rec[13] + "\nUpdated on: " + rec[14]; pg.record.linkedNotes.setData(rec[18]); pg.record.linkedOrders.setData(rec[19]); pg.record.updates.setData(rec[17]); return; } } alert("An error occured while attempting to retrieve\ndetails for record #" + pg.record.recordID + ".\n\nPlease contact support if this problem persists.\nWe apologize for the inconvenience."); pg.hideRecordView(); } // ===== - HIDE COMMENTS VIEW - ===== // pg.hideCommentsView = function(){ pg.recordComments.style.left = ""; pg.recordComments.disabled = true; pg.recordComments.comments.value = ""; pg.record.disabled = false; pg.record.style.zIndex = 5500; } // ===== - HIDE code SEARCH - ===== // pg.hidecodeSearch = function(){ pg.codeSearch.style.left = ""; pg.codeSearch.disabled = true; pg.record.disabled = false; pg.record.style.zIndex = 5500; } // ===== - HIDE RECORD - ===== // pg.hideRecord = function(){ if(arguments.length){ pg.loadRecords_Request(); } else if(pg.records.lastSelected){ var n = new Object(); n.recordTypeID = 11; n.patientID = request.patientID; n.recordID = pg.records.lastSelected.i; n.action = "/location/hideRecord/dsp_hideRecord.php"; n.target = popWinCenterScreen("/common/html/empty.htm", 164, 476); myLocationDB.PostRequest(n); } } // ===== - HIDE RECORD VIEW - ===== // pg.hideRecordView = function(){ pg.record.style.left = ""; pg.record.disabled = true; // reset record grids pg.record.updates.state = "NO_RECORDS"; pg.record.linkedNotes.state = "NO_RECORDS"; pg.record.linkedOrders.state = "NO_RECORDS"; // reset linked record tabs pg.record.tabs[0].click(); pg.record.tabs[1].disable(true); pg.record.tabs[2].disable(true); pg.record.tabs[1].all[1].innerHTML = "Notes"; pg.record.tabs[2].all[1].innerHTML = "Orders"; // reset record state pg.recordState = null; // reset record view pg.record.recordID = 0; pg.record.code.value = ""; pg.record.code.codeID = 0; pg.record.description.value = ""; pg.record.type.selectedIndex = 0; pg.record.assessmentType.selectedIndex = 0; pg.record.onsetDateType.selectedIndex = 0; pg.record.chkOnsetDateIsApproximate.checked = false; pg.record.resolveDateType.selectedIndex = 0; pg.record.chkResolveDateIsApproximate.checked = false; pg.record.lblCommentCount.innerHTML = 0; pg.record.comments.value = ""; pg.record.lblUpdatedBy.innerHTML = ""; pg.record.lblUpdatedBy.title = ""; pg.record.updateComment = ""; pg.recordComments.comments.value = ""; pg.record.active = false; pg.codeSearch.newRecord = true; pg.blocker.className = ""; pg.workin(false); } // ===== - HIDE UPDATE VIEW - ===== // pg.hideUpdateView = function(){ pg.recordUpdate.style.left = ""; pg.recordUpdate.disabled = true; pg.recordUpdate.type.value = ""; pg.recordUpdate.onsetDate.value = ""; pg.recordUpdate.description.value = ""; pg.recordUpdate.resolveDate.value = ""; pg.recordUpdate.assessmentType.value = ""; pg.record.disabled = false; pg.record.btnViewUpdate.setState(); pg.record.style.zIndex = 5500; } // ===== - INIT - ===== // pg.init = function(){ var tab = 1; pg.delim = String.fromCharCode(127); pg.subDelim = String.fromCharCode(1); pg.blocker = da.blocker; pg.hourglass = da.hourglass; pg.pageContent = da.pageContent; pg.blocker.shim = da.blocker_shim; pg.activeTip = da.activeTip; pg.activeTip.anchor = null; pg.activeTip.shim = da.activeTip_shim; // PAGE TITLE pg.pageTitle = da.pageTitle; // TOTAL RECORDS pg.totalRecords = da.totalRecords[0]; // START RECORD pg.startRecord = da.startRecord[0]; pg.startRecord.onchange = function(){ pg.records.startRecord = this.value; pg.loadRecords_Request(); } // RECORD PANEL pg.recordPanel = myLocationDB.RecordPanel(pg.pageContent.all.recordPanel); for(var i=0; i<pg.recordPanel.buttons.length; i++){ if(pg.recordPanel.buttons[i].orderBy){ pg.recordPanel.buttons[i].onclick = pg.sortRecords; } } // RECORDS GRIDVIEW pg.records = pg.recordPanel.all.grid; alert(pg.recordPanel.all.grid); pg.records.sortOrder = "DESC"; pg.records.lastExpanded = null; pg.records.attachEvent("onrowclick", pg.record_click); pg.records.orderBy = pg.recordPanel.buttons[0].orderBy; pg.records.attachEvent("onrowmouseout", pg.record_mouseOut); pg.records.attachEvent("onrowdblclick", pg.getRecord_Request); pg.records.attachEvent("onrowmouseover", pg.record_mouseOver); pg.records.attachEvent("onstateready", pg.loadRecords_Response); // BUTTON - TOGGLE HIDDEN RECORDS pg.btnHiddenRecords = myLocationDB.Custom.ImageButton(3, 751, 19, 19, "/common/images/hide.gif", 1, 1, "", "", da.pageContent); pg.btnHiddenRecords.setTitle("Show hidden records"); pg.btnHiddenRecords.onclick = pg.toggleHiddenRecords; pg.btnHiddenRecords.setState = function(){ this.disable(!pg.records.totalHiddenRecords); } // code SEARCH SUBWIN pg.codeSearch = da.subWin_codeSearch; pg.codeSearch.newRecord = true; pg.codeSearch.searchType = "code"; pg.codeSearch.searchFavorites = true; pg.codeSearch.onkeydown = function(){ if(window.event && window.event.keyCode && window.event.keyCode == 113){ if(pg.codeSearch.searchType == "DESCRIPTION"){ pg.codeSearch.searchType = "code"; pg.codeSearch.lblSearchType.innerHTML = "ICD-9 Code"; } else { pg.codeSearch.searchType = "DESCRIPTION"; pg.codeSearch.lblSearchType.innerHTML = "Description"; } pg.searchcodes_Request(); } } // SEARCH TYPE pg.codeSearch.lblSearchType = pg.codeSearch.all.lblSearchType; // SEARCH STRING pg.codeSearch.searchString = pg.codeSearch.all.searchString; pg.codeSearch.searchString.tabIndex = 1; pg.codeSearch.searchString.onfocus = function(){ this.select(); } pg.codeSearch.searchString.onblur = function(){ this.value = this.value.trim(); } pg.codeSearch.searchString.onkeydown = function(){ if(window.event && window.event.keyCode && window.event.keyCode == 13){ pg.searchcodes_Request(); } } // -- "SEARCH" pg.codeSearch.btnSearch = pg.codeSearch.all.btnSearch; pg.codeSearch.btnSearch.tabIndex = 2; pg.codeSearch.btnSearch.disable = myLocationDB.Disable; pg.codeSearch.btnSearch.onclick = pg.searchcodes_Request; pg.codeSearch.btnSearch.baseTitle = "Search diagnosis codes"; pg.codeSearch.btnSearch.setState = function(){ pg.codeSearch.btnSearch.disable(pg.codeSearch.searchString.value.trim().length < 2); } pg.codeSearch.searchString.onkeyup = pg.codeSearch.btnSearch.setState; // START RECORD / TOTAL RECORDS pg.codeSearch.startRecord = pg.codeSearch.all.startRecord; pg.codeSearch.totalRecords = pg.codeSearch.all.totalRecords; pg.codeSearch.startRecord.onchange = function(){ pg.codeSearch.records.startRecord = this.value; pg.searchcodes_Request(); } // RECORD PANEL pg.codeSearch.recordPanel = myLocationDB.RecordPanel(pg.codeSearch.all.recordPanel); pg.codeSearch.recordPanel.buttons[0].onclick = pg.sortcodeResults; pg.codeSearch.recordPanel.buttons[1].onclick = pg.sortcodeResults; // DATA GRIDVIEW pg.codeSearch.records = pg.codeSearch.all.grid; pg.codeSearch.records.orderBy = "code"; pg.codeSearch.records.attachEvent("onrowdblclick", pg.updatecode); pg.codeSearch.records.attachEvent("onstateready", pg.searchcodes_Response); // BUTTON - "CANCEL" pg.codeSearch.btnCancel = pg.codeSearch.all.btnCancel; pg.codeSearch.btnCancel.tabIndex = 4; pg.codeSearch.btnCancel.onclick = pg.hidecodeSearch; pg.codeSearch.btnCancel.title = "Close this search area"; // SEARCH FAVORITES / ALL pg.codeSearch.optSearch = myLocationDB.InputButton(pg.codeSearch.all.optSearch); pg.codeSearch.optSearch[0].onclick = function(){ if(pg.codeSearch.searchFavorites){ pg.codeSearch.searchString.focus(); } else { pg.codeSearch.searchFavorites = true; pg.searchcodes_Request(); } } pg.codeSearch.optSearch[1].onclick = function(){ if(pg.codeSearch.searchFavorites){ pg.codeSearch.searchFavorites = false; pg.searchcodes_Request(); } else { pg.codeSearch.searchString.focus(); } } // -- "USE SELECTED" pg.codeSearch.btnUseSelected = pg.codeSearch.all.btnUseSelected; pg.codeSearch.btnUseSelected.tabIndex = 3; pg.codeSearch.btnUseSelected.onclick = pg.updatecode; pg.codeSearch.btnUseSelected.disable = myLocationDB.Disable; pg.codeSearch.btnUseSelected.baseTitle = "Use the selected diagnosis code"; pg.codeSearch.btnUseSelected.setState = function(){ pg.codeSearch.btnUseSelected.disable(!pg.codeSearch.records.lastSelected); } pg.codeSearch.records.attachEvent("onrowclick", pg.codeSearch.btnUseSelected.setState); // RECORD STATE pg.recordState = null; // RECORD SUBWIN pg.record = da.subWin_record; pg.record.recordID = 0; pg.record.active = false; pg.record.updateComment = ""; // -- TABS pg.record.tabs = myLocationDB.TabCollection( pg.record.all.tab, function(){ if(pg.record.tabs[0].all[0].checked){ pg.record.btnOpen.style.display = "none"; pg.record.chkSelectAll.hitArea.style.display = "none"; pg.record.btnSave.style.display = "block"; pg.record.lblUpdatedBy.style.display = "block"; pg.record.pnlRecord_shim.style.display = "none"; } else { pg.record.pnlRecord_shim.style.display = "block"; pg.record.btnSave.style.display = "none"; pg.record.lblUpdatedBy.style.display = "none"; pg.record.btnOpen.setState(); pg.record.btnOpen.style.display = "block"; if(pg.record.tabs[2].all[0].checked){ pg.record.chkSelectAll.hitArea.style.display = "none"; //pg.record.btnViewLabs.setState(); //pg.record.btnViewLabs.style.display = "block"; } else { pg.record.chkSelectAll.setState(); pg.record.chkSelectAll.hitArea.style.display = "block"; //pg.record.btnViewLabs.style.display = "none"; } } } ); pg.record.tabs[1].disable(true); pg.record.tabs[2].disable(true); pg.record.pnlRecord_shim = pg.record.all.pnlRecord_shim; pg.record.code = pg.record.all.code; pg.record.code.codeID = 0; pg.record.code.tabIndex = -1; // -- CHANGE code pg.record.btnChangecode = myLocationDB.Custom.ImageButton(6, 107, 22, 22, "/common/images/edit.gif", 2, 2, "", "", pg.record.all.pnlRecord); pg.record.btnChangecode.tabIndex = 1; pg.record.btnChangecode.onclick = pg.showcodeSearch; pg.record.btnChangecode.title = "Change the diagnosis code for this problem"; pg.record.description = pg.record.all.description; pg.record.description.tabIndex = 2; pg.record.type = pg.record.all.type; pg.record.type.tabIndex = 3; pg.record.assessmentType = pg.record.all.assessmentType; pg.record.assessmentType.tabIndex = 9; // ONSET DATE pg.record.onsetDateType = pg.record.all.onsetDateType; pg.record.onsetDateType.tabIndex = 4; pg.record.onsetDateType.onchange = pg.record.onsetDateType.setState = function(){ switch(this.selectedIndex){ case 1: // PARTIAL pg.record.chkOnsetDateIsApproximate.disable(false); pg.record.onsetDate.style.visibility = "hidden"; pg.record.onsetDateUnknown.style.visibility = "hidden"; pg.record.onsetDate.datePicker.style.visibility = "hidden"; pg.record.onsetDateMonth.style.visibility = "visible"; pg.record.onsetDateYear.style.visibility = "visible"; break; case 2: // UNKNOWN pg.record.chkOnsetDateIsApproximate.disable(true); pg.record.onsetDate.style.visibility = "hidden"; pg.record.onsetDateYear.style.visibility = "hidden"; pg.record.onsetDateMonth.style.visibility = "hidden"; pg.record.onsetDate.datePicker.style.visibility = "hidden"; pg.record.onsetDateUnknown.style.visibility = "visible"; break; default: // "WHOLE" pg.record.chkOnsetDateIsApproximate.disable(true); pg.record.onsetDateMonth.style.visibility = "hidden"; pg.record.onsetDateYear.style.visibility = "hidden"; pg.record.onsetDateUnknown.style.visibility = "hidden"; pg.record.onsetDate.style.visibility = "visible"; pg.record.onsetDate.datePicker.style.visibility = "visible"; break; } } pg.record.onsetDate = myLocationDB.Custom.DateInput(30, 364, 80, pg.record.all.pnlRecord, 1, 1, 0, params.todayDate, 1); pg.record.onsetDate.tabIndex = 5; pg.record.onsetDate.style.textAlign = "LEFT"; pg.record.onsetDate.calendar.style.zIndex = 6000; pg.record.onsetDate.datePicker.style.left = "448px"; pg.record.onsetDate.setDateRange(params.birthDate, params.todayDate); pg.record.onsetDateYear = pg.record.all.onsetDateYear; pg.record.onsetDateYear.tabIndex = 6; pg.record.onsetDateMonth = pg.record.all.onsetDateMonth pg.record.onsetDateMonth.tabIndex = 7; pg.record.onsetDateUnknown = pg.record.all.onsetDateUnknown; pg.record.onsetDateUnknown.tabIndex = 8; pg.record.chkOnsetDateIsApproximate = myLocationDB.InputButton(pg.record.all.chkOnsetDateIsApproximate); pg.record.chkOnsetDateIsApproximate.setTitle("Onset date is approximate"); pg.record.chkOnsetDateIsApproximate.disable(true); // RESOLVE DATE pg.record.lblResolveDate = pg.record.all.lblResolveDate; pg.record.resolveDateType = pg.record.all.resolveDateType; pg.record.resolveDateType.tabIndex = 10; pg.record.resolveDateType.lastSelectedIndex = 0; pg.record.resolveDateType.setState = function(){ switch(this.selectedIndex){ case 1: // PARTIAL pg.record.chkResolveDateIsApproximate.disable(false); pg.record.resolveDate.style.visibility = "hidden"; pg.record.resolveDateUnknown.style.visibility = "hidden"; pg.record.resolveDate.datePicker.style.visibility = "hidden"; pg.record.resolveDateMonth.style.visibility = "visible"; pg.record.resolveDateYear.style.visibility = "visible"; break; case 2: // UNKNOWN pg.record.chkResolveDateIsApproximate.disable(true); pg.record.resolveDate.style.visibility = "hidden"; pg.record.resolveDateYear.style.visibility = "hidden"; pg.record.resolveDateMonth.style.visibility = "hidden"; pg.record.resolveDate.datePicker.style.visibility = "hidden"; pg.record.resolveDateUnknown.style.visibility = "visible"; break; default: // "WHOLE" pg.record.chkResolveDateIsApproximate.disable(true); pg.record.resolveDateMonth.style.visibility = "hidden"; pg.record.resolveDateYear.style.visibility = "hidden"; pg.record.resolveDateUnknown.style.visibility = "hidden"; pg.record.resolveDate.style.visibility = "visible"; pg.record.resolveDate.datePicker.style.visibility = "visible"; break; } } pg.record.resolveDateType.onchange = function(){ this.lastSelectedIndex = this.selectedIndex; this.setState(); } pg.record.resolveDate = myLocationDB.Custom.DateInput(55, 364, 80, pg.record.all.pnlRecord, 1, 1, 0, params.todayDate, 1); pg.record.resolveDate.tabIndex = 11; pg.record.resolveDate.style.textAlign = "LEFT"; pg.record.resolveDate.calendar.style.zIndex = 6000; pg.record.resolveDate.datePicker.style.left = "448px"; pg.record.resolveDate.setDateRange(params.birthDate, params.todayDate); pg.record.resolveDate.setState = function(){ if(pg.record.assessmentType.value == 15){ pg.record.chkResolveDateIsApproximate.disable(pg.record.resolveDateType.value != "PARTIAL"); pg.record.resolveDate.disabled = false; pg.record.lblResolveDate.disabled = false; pg.record.resolveDateType.selectedIndex = pg.record.resolveDateType.lastSelectedIndex; pg.record.resolveDateType.setState(); pg.record.resolveDate.datePicker.disable(false); pg.record.resolveDateType.disabled = false; pg.record.resolveDateYear.disabled = false; pg.record.resolveDateMonth.disabled = false; pg.record.resolveDateUnknown.disabled = false; } else { pg.record.resolveDate.datePicker.disable(true); pg.record.chkResolveDateIsApproximate.disable(true); pg.record.resolveDateType.selectedIndex = 2; pg.record.resolveDateType.setState(); pg.record.resolveDate.disabled = true; pg.record.lblResolveDate.disabled = true; pg.record.resolveDateType.disabled = true; pg.record.resolveDateYear.disabled = true; pg.record.resolveDateMonth.disabled = true; pg.record.resolveDateUnknown.disabled = true; } } pg.record.assessmentType.onchange = pg.record.resolveDate.setState; pg.record.resolveDateYear = pg.record.all.resolveDateYear; pg.record.resolveDateYear.tabIndex = 11; pg.record.resolveDateMonth = pg.record.all.resolveDateMonth pg.record.resolveDateMonth.tabIndex = 12; pg.record.resolveDateUnknown = pg.record.all.resolveDateUnknown; pg.record.resolveDateUnknown.tabIndex = 13; pg.record.chkResolveDateIsApproximate = myLocationDB.InputButton(pg.record.all.chkResolveDateIsApproximate); pg.record.chkResolveDateIsApproximate.setTitle("Resolve date is approximate"); pg.record.chkResolveDateIsApproximate.disable(true); // -- UPDATES pg.record.updates = pg.record.all.pnlUpdates.all.grid; pg.record.lblUpdateCount = pg.record.all.lblUpdateCount; pg.record.updates.attachEvent("onstateready", pg.showRecordView); pg.record.updates.attachEvent("onrowdblclick", pg.showUpdateView); // -- "VIEW SELECTED" pg.record.btnViewUpdate = myLocationDB.PanelButton(pg.record.all.btnViewUpdate); pg.record.btnViewUpdate.setTitle("View details for the selected problem update"); pg.record.btnViewUpdate.onclick = pg.showUpdateView; pg.record.btnViewUpdate.setState = function(){ pg.record.btnViewUpdate.disable(!pg.record.updates.lastSelected); } pg.record.updates.attachEvent("onrowclick", pg.record.btnViewUpdate.setState); // -- COMMENTS pg.record.comments = pg.record.all.comments; pg.record.pnlComments = pg.record.all.pnlComments; pg.record.lblCommentCount = pg.record.all.lblCommentCount; // -- UPDATE COMMENTS pg.record.btnUpdateComments = myLocationDB.PanelButton(pg.record.all.btnUpdateComments); pg.record.btnUpdateComments.onclick = pg.showCommentView; pg.record.btnUpdateComments.title = "Update this record's comments"; // -- LINKED NOTES pg.record.linkedNotes = pg.record.all.linkedNotes.all.grid; pg.record.linkedNotes.attachEvent("onrowclick", pg.linkedRecordClick); pg.record.linkedNotes.attachEvent("onrowdblclick", pg.openLinkedNote); pg.record.linkedNotes.attachEvent("onstateready", pg.setLinkedNotes_Count); // -- LINKED ORDERS pg.record.linkedOrders = pg.record.all.linkedOrders.all.grid; pg.record.linkedOrders.attachEvent("onrowclick", pg.linkedRecordClick); pg.record.linkedOrders.attachEvent("onrowdblclick", pg.openLinkedOrder); pg.record.linkedOrders.attachEvent("onstateready", pg.setLinkedOrders_Count); // -- "CLOSE" pg.record.btnClose = pg.record.all.btnClose; pg.record.btnClose.tabIndex = 15; pg.record.btnClose.onclick = pg.hideRecordView; pg.record.btnClose.title = "Close this record panel"; // -- LAST UPDATED BY pg.record.lblUpdatedBy = pg.record.all.lblUpdatedBy; // -- "SELECT ALL" pg.record.chkSelectAll = myLocationDB.InputButton(pg.record.all.chkSelectAll); pg.record.chkSelectAll.onclick = function(){ if(pg.record.tabs[1].all[0].checked){ if(pg.record.chkSelectAll.checked){ pg.record.linkedNotes.selectAll(); } else { pg.record.linkedNotes.deselectAll(); } } else { if(pg.record.chkSelectAll.checked){ pg.record.linkedOrders.selectAll(); } else { pg.record.linkedOrders.deselectAll(); } } pg.record.btnOpen.setState(); //pg.record.btnViewLabs.setState(); } pg.record.chkSelectAll.setState = function(){ if(pg.record.tabs[1].all[0].checked){ pg.record.chkSelectAll.checked = pg.record.linkedNotes.selectedRows.length == pg.record.linkedNotes.rows.length; } else { pg.record.chkSelectAll.checked = pg.record.linkedOrders.selectedRows.length == pg.record.linkedOrders.rows.length; } } // -- "OPEN SELECTED" pg.record.btnOpen = pg.record.all.btnOpenSelected; pg.record.btnOpen.tabIndex = 14; pg.record.btnOpen.disable = myLocationDB.Disable; pg.record.btnOpen.title = "Open the selected record"; pg.record.btnOpen.onclick = function(){ if(pg.record.tabs[1].all[0].checked){ pg.openLinkedNote(); } else if(pg.record.tabs[2].all[0].checked){ pg.openLinkedOrder(); } else { pg.record.btnOpen.disable(true); } } pg.record.btnOpen.setState = function(){ if(pg.record.tabs[1].all[0].checked){ pg.record.btnOpen.disable(!pg.record.linkedNotes.lastSelected); } else if(pg.record.tabs[2].all[0].checked){ pg.record.btnOpen.disable(pg.record.linkedOrders.selectedRows.length != 1); } else { pg.record.btnOpen.disable(true); } } // -- "SAVE" pg.record.btnSave = pg.record.all.btnSave; pg.record.btnSave.tabIndex = 14; pg.record.btnSave.onclick = pg.updateRecord_Request; pg.record.btnSave.title = "Save changes to this record"; // RECORD UPDATE SUBWIN pg.recordUpdate = da.subWin_update; pg.recordUpdate.lblUpdatedBy = pg.recordUpdate.all.lblUpdatedBy; pg.recordUpdate.lblUpdateDTS = pg.recordUpdate.all.lblUpdateDTS; pg.recordUpdate.type = pg.recordUpdate.all.type; pg.recordUpdate.onsetDate = pg.recordUpdate.all.onsetDate; pg.recordUpdate.description = pg.recordUpdate.all.description; pg.recordUpdate.resolveDate = pg.recordUpdate.all.resolveDate; pg.recordUpdate.assessmentType = pg.recordUpdate.all.assessmentType; // -- "CLOSE" pg.recordUpdate.btnClose = pg.recordUpdate.all.btnClose; pg.recordUpdate.btnClose.tabIndex = 1; pg.recordUpdate.btnClose.onclick = pg.hideUpdateView; pg.recordUpdate.btnClose.title = "Close this sub-window"; // COMMENTS SUBWIN pg.recordComments = da.subWin_comments; pg.recordComments.comments = pg.recordComments.all.updateComments; pg.recordComments.comment

  Read the article

• NGINX MIME TYPE

  - by justanotherprogrammer

  I have my nginx conf file so that when ever a mobile device visits my site the url gets rewritten to m.mysite.com I did it by adding the following set $mobile_rewrite do_not_perform; if ($http_user_agent ~* "android.+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|iris|kindle|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino") { set $mobile_rewrite perform; } if ($http_user_agent ~* "^(1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|e\-|e\/|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|xda(\-|2|g)|yas\-|your|zeto|zte\-)") { set $mobile_rewrite perform; } if ($mobile_rewrite = perform) { rewrite ^ http://m.mywebsite.com redirect; break; } I got it from http://detectmobilebrowsers.com/ IT WORKS.But none of my images/js/css files load only the HTML. And I know its the chunk of code I mentioned above because when I remove it and visit m.mywebsite.com from my mobile device everything loads up.So this bit of code does SOMETHING to my css/img/js MIME TYPES. I found this out through the the console error messages from safari with the user agent set to iphone. text.cssResource interpreted as stylesheet but transferred with MIME type text/html. 960_16_col.cssResource interpreted as stylesheet but transferred with MIME type text/html. design.cssResource interpreted as stylesheet but transferred with MIME type text/html. navigation_menu.cssResource interpreted as stylesheet but transferred with MIME type text/html. reset.cssResource interpreted as stylesheet but transferred with MIME type text/html. slide_down_panel.cssResource interpreted as stylesheet but transferred with MIME type text/html. myrealtorpage_view.cssResource interpreted as stylesheet but transferred with MIME type text/html. head.jsResource interpreted as script but transferred with MIME type text/html. head.js:1SyntaxError: Parse error isaac:208ReferenceError: Can't find variable: head mrp_home_icon.pngResource interpreted as image but transferred with MIME type text/html. M_1_L_289_I_499_default_thumb.jpgResource interpreted as image but transferred with MIME type text/html. M_1_L_290_I_500_default_thumb.jpgResource interpreted as image but transferred with MIME type text/html. M_1_default.jpgResource interpreted as image but transferred with MIME type text/html. default_listing_image.pngResource interpreted as image but transferred with MIME type text/html. here is my whole nginx conf file just incase... worker_processes 1; events { worker_connections 1024; } http { include mime.types; include /etc/nginx/conf/fastcgi.conf; default_type application/octet-stream; sendfile on; keepalive_timeout 65; #server1 server { listen 80; server_name mywebsite.com www.mywebsite.com ; index index.html index.htm index.php; root /srv/http/mywebsite.com/public; access_log /srv/http/mywebsite.com/logs/access.log; error_log /srv/http/mywebsite.com/logs/error.log; #---------------- For CodeIgniter ----------------# # canonicalize codeigniter url end points # if your default controller is something other than "welcome" you should change the following if ($request_uri ~* ^(/main(/index)?|/index(.php)?)/?$) { rewrite ^(.*)$ / permanent; } # removes trailing "index" from all controllers if ($request_uri ~* index/?$) { rewrite ^/(.*)/index/?$ /$1 permanent; } # removes trailing slashes (prevents SEO duplicate content issues) if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # unless the request is for a valid file (image, js, css, etc.), send to bootstrap if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1 last; break; } #---------------------------------------------------# #--------------- For Mobile Devices ----------------# set $mobile_rewrite do_not_perform; if ($http_user_agent ~* "android.+mobile|avantgo|bada\/|blackberry|blazer|compal|elaine|fennec|hiptop|iemobile|ip(hone|od)|iris|kindle|lge |maemo|midp|mmp|netfront|opera m(ob|in)i|palm( os)?|phone|p(ixi|re)\/|plucker|pocket|psp|symbian|treo|up\.(browser|link)|vodafone|wap|windows (ce|phone)|xda|xiino") { set $mobile_rewrite perform; } if ($http_user_agent ~* "^(1207|6310|6590|3gso|4thp|50[1-6]i|770s|802s|a wa|abac|ac(er|oo|s\-)|ai(ko|rn)|al(av|ca|co)|amoi|an(ex|ny|yw)|aptu|ar(ch|go)|as(te|us)|attw|au(di|\-m|r |s )|avan|be(ck|ll|nq)|bi(lb|rd)|bl(ac|az)|br(e|v)w|bumb|bw\-(n|u)|c55\/|capi|ccwa|cdm\-|cell|chtm|cldc|cmd\-|co(mp|nd)|craw|da(it|ll|ng)|dbte|dc\-s|devi|dica|dmob|do(c|p)o|ds(12|\-d)|el(49|ai)|em(l2|ul)|er(ic|k0)|esl8|ez([4-7]0|os|wa|ze)|fetc|fly(\-|_)|g1 u|g560|gene|gf\-5|g\-mo|go(\.w|od)|gr(ad|un)|haie|hcit|hd\-(m|p|t)|hei\-|hi(pt|ta)|hp( i|ip)|hs\-c|ht(c(\-| |_|a|g|p|s|t)|tp)|hu(aw|tc)|i\-(20|go|ma)|i230|iac( |\-|\/)|ibro|idea|ig01|ikom|im1k|inno|ipaq|iris|ja(t|v)a|jbro|jemu|jigs|kddi|keji|kgt( |\/)|klon|kpt |kwc\-|kyo(c|k)|le(no|xi)|lg( g|\/(k|l|u)|50|54|e\-|e\/|\-[a-w])|libw|lynx|m1\-w|m3ga|m50\/|ma(te|ui|xo)|mc(01|21|ca)|m\-cr|me(di|rc|ri)|mi(o8|oa|ts)|mmef|mo(01|02|bi|de|do|t(\-| |o|v)|zz)|mt(50|p1|v )|mwbp|mywa|n10[0-2]|n20[2-3]|n30(0|2)|n50(0|2|5)|n7(0(0|1)|10)|ne((c|m)\-|on|tf|wf|wg|wt)|nok(6|i)|nzph|o2im|op(ti|wv)|oran|owg1|p800|pan(a|d|t)|pdxg|pg(13|\-([1-8]|c))|phil|pire|pl(ay|uc)|pn\-2|po(ck|rt|se)|prox|psio|pt\-g|qa\-a|qc(07|12|21|32|60|\-[2-7]|i\-)|qtek|r380|r600|raks|rim9|ro(ve|zo)|s55\/|sa(ge|ma|mm|ms|ny|va)|sc(01|h\-|oo|p\-)|sdk\/|se(c(\-|0|1)|47|mc|nd|ri)|sgh\-|shar|sie(\-|m)|sk\-0|sl(45|id)|sm(al|ar|b3|it|t5)|so(ft|ny)|sp(01|h\-|v\-|v )|sy(01|mb)|t2(18|50)|t6(00|10|18)|ta(gt|lk)|tcl\-|tdg\-|tel(i|m)|tim\-|t\-mo|to(pl|sh)|ts(70|m\-|m3|m5)|tx\-9|up(\.b|g1|si)|utst|v400|v750|veri|vi(rg|te)|vk(40|5[0-3]|\-v)|vm40|voda|vulc|vx(52|53|60|61|70|80|81|83|85|98)|w3c(\-| )|webc|whit|wi(g |nc|nw)|wmlb|wonu|x700|xda(\-|2|g)|yas\-|your|zeto|zte\-)") { set $mobile_rewrite perform; } if ($mobile_rewrite = perform) { rewrite ^ http://m.mywebsite.com redirect; #rewrite ^(.*)$ $scheme://mywebsite.com/mobile/$1; #return 301 http://m.mywebsite.com; #break; } #---------------------------------------------------# location / { index index.html index.htm index.php; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/conf/fastcgi_params; } }#sever1 #server 2 server { listen 80; server_name m.mywebsite.com; index index.html index.htm index.php; root /srv/http/mywebsite.com/public; access_log /srv/http/mywebsite.com/logs/access.log; error_log /srv/http/mywebsite.com/logs/error.log; #---------------- For CodeIgniter ----------------# # canonicalize codeigniter url end points # if your default controller is something other than "welcome" you should change the following if ($request_uri ~* ^(/main(/index)?|/index(.php)?)/?$) { rewrite ^(.*)$ / permanent; } # removes trailing "index" from all controllers if ($request_uri ~* index/?$) { rewrite ^/(.*)/index/?$ /$1 permanent; } # removes trailing slashes (prevents SEO duplicate content issues) if (!-d $request_filename) { rewrite ^/(.+)/$ /$1 permanent; } # unless the request is for a valid file (image, js, css, etc.), send to bootstrap if (!-e $request_filename) { rewrite ^/(.*)$ /index.php?/$1 last; break; } #---------------------------------------------------# location / { index index.html index.htm index.php; } error_page 500 502 503 504 /50x.html; location = /50x.html { root html; } location ~ \.php$ { try_files $uri =404; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; fastcgi_param PATH_INFO $fastcgi_script_name; include /etc/nginx/conf/fastcgi_params; } }#sever2 }#http I could just detect the mobile browsers with php or javascript but i need to make the detection at the server level so that i can use the 'm' in m.mywebsite.com as a flag in my controllers (codeigniter) to serve up the right view. I hope someone can help me! Thank you!

  Read the article

• Bind9 DNS help with psuedo domains

  - by Tempname

  I have setup a dns server on my home network to manage some apps that I have written for home. Currently I have 3 "domains" that I am using: controller devserver fileserver The first issue that I am having is that when I attempt to ping the parent domain of any of these 3 I am unable to. I simply get ping: unknown host controller. I however can ping any of the subdomains I have setup for these 3 parent domains. The second issue is I am unable to ping any of the 3 parent domains or any child domains from my window machines. I have verified that these domains work on other devices in my house (ipod touch, ipad, cell phone). Any help with this is greatly appreciated Here is bind data file for my parent domain controller: ; ; BIND data file for local loopback interface ; $TTL 604800 @ IN SOA controller. admin.controller. ( 9 604800 86400 2419200 604800 ) ; @ IN NS controller. @ IN A 192.168.1.104 controller IN A 192.168.1.194 admin.controller. IN A 192.168.1.104

  Read the article

• getting "No LoginModules configured" for JAAS login under WebSphere security domain

  - by user1739040

  I have a JAX-RPC web service running on WebSphere V7. It requires a UserNameToken for security. I have a custom login module (MyLoginModule) which extracts the username and password, and that module is defined as a JAAS application login in the websphere admin console. Using IBM RAD 8.0, I have bound the token consumer to the login module using the JAAS config name of the module. This all works fine and happy on my development server. Now I realize, that for deployment to another server, I am required to move the JAAS login from global security to a security domain. When I do that, it breaks my web service. I get this SOAP Fault message: com.ibm.wsspi.wssecurity.SoapSecurityException: WSEC6520E: Construction of the login context failed. The exception is : javax.security.auth.login.LoginException: No LoginModules configured for MyLoginModule According to the IBM docs: The JAAS application logins, the JAAS system logins, and the JAAS J2C authentication data aliases can all be configured at the domain level. By default, all of the applications in the system have access to the JAAS logins configured at the global level. The security runtime first checks for the JAAS logins at the domain level. If it does not find them, it then checks for them in the global security configuration. Configure any of these JAAS logins at a domain only when you need to specify a login that is used exclusively by the applications in the security domain. So I am looking to make sure my application is in the domain, and I have tried everything I can think of. (I have assigned the domain to "all scopes", to the entire cell, etc.) No luck, I keep getting the same error response to my web service client. Any help or hints are appreciated.

  Read the article

• Excel data into PowerPoint slides

  - by nqw1

  I have already found some helpful sites but I'm still unable to do what I want. My Excel file contains few columns and multiple rows. All the data from one row would be in one slide but data from different cells in that one row should go to a specific elements in PP slide. At first, is it possible to export data from an Excel cell into a specific text box in PP? For example, I would like to have all data from the first column of each row go to a Text box 1. Let's say I have 100 rows so I would have 100 slides and each slide would have Text bow 1 with correct data. Text box of slide 66 would have data from the first column of row 66. Then all data from the second column of each row would go to a text bow 2 and so on. I tried to do some macros with bad success. I also tried to use Word outlines and export them into PP (New slide - Slides from Outline) but there seems to be a bug since I got 250 pages of gibberish. I had only two paragraphs and both had one word. First paragraph used Heading 1 style and second paragraph used Normal style. Sites what I have found, use VB and/or some other programming language to create slides from Excel sheets. I have tried to add those VB codes into my macros but none of them hasn't worked so far. Probably I just don't know how to use them correctly :) Here's some helpful sites: VBA: Create PowerPoint Slide for Each Row in Excel Workbook Creating a Presentation Report Based on Data Question in Stackoverflow I use Office 2011 on Mac. Any help would be appreciated!

  Read the article

• Two large, linked Excel files take 30 minutes to save, except in VMWare environment

  - by Gerald L

  I support some tax consultants who love to use Excel when they should probably be using Access. Anyway, they have created two Excel files, A and B. File B has cells linked to file A. File A is 27 MB and file B is 16 MB. One worksheet has roughly 1 million rows and there is another worksheet doing a whole bunch of SUMIF on the 1 million rows. Not the best idea, but whatever. Both Excel files open and recalculate within a reasonable amount of time (1-2 minutes). For a files that large, this is acceptable. Here is the problem: Once you change a cell, and save the file B, it takes a solid 30 minutes to save the file, and the processors are going full speed. I've tried this on 6 different machines, all running Windows XP SP3 with Office 2007 SP2 and all patches. The specs vary from one machine with 512 MB or RAM to a machine with 4 GB of RAM and quad processors. Same result every time. Here is the clincher: If I do this same save operation on a VMWare virtual machine, the file gets saved in 1 minute. I've tried this with my ESX servers at the office, my Mac Fusion at home, and VMWare workstation at the office. It does not matter how much RAM the virtual machine has... it saves in about 1 minute every time. Does anybody have any idea why this is happening and how to fix?

  Read the article

• SQL 2008 Replication corrupt data problem

  - by Jonathan K

  We took a SQL 2000 database. Took a lightspeed backup. Restored on SQL 2008 active/passive cluster. Then setup replication to replicate the data back to SQL 2000. So 2008 is the publisher/distributor, and 2000 is doing a pull subscription. Everything works well, execpt we occassionally get corrupt data in varchar/text fields on the subscriber. So for example we have a table with 4500 records. When we run this statement: update MedstaffProvider set Notes = 'Cell Phone: 360.123.4567 Answering Service: 360.123.9876' where LastName = 'smith' The record in the 2008 database is updated as expected. But in the subsriber datbase we'll get gibberish in the notes field: óPÌ[1] T $Oé[1] ð²ñ. K Here's what we know: This is repeatable, meaning we can run that same query all day long and get the same gibberish. If you alter update statement slightly the data gets replicated just fine. The collation on both databases is the same. So far we've only detected the problem with text/varchar fields. (The notes field above is text). Only one or two records in a table are impacted. The table structure looks identical in both 2000/2008. We haven't made any changes. We have found one solution that fixes the problem. Basically if we recreate the table in 2008 (say as MedStaffProvider2) and then insert all the data. Drop the original table. Rename the table to it's original name. Setup replication again. And run the exact same update statement it works as expected. Does anyone have any idea what might be happening here? Or are there any other techniques we can use to troubleshoot this? I've found a solution for this, but would really like to undertsand why this is happening.

  Read the article

• Excel 2010 data validation warning (compatibility mode)

  - by Madmanguruman

  We have some legacy worksheets that were created in Excel 2003, which are used by LabVIEW-based test automation software. The current LabVIEW software can only handle the legacy .xls format, so we're forced to keep these worksheets as-is for the time being. We've migrated to Office 2010 and when working with these worksheets, I see this warning: "The following features in this workbook are not supported by earlier versions of Excel. These features may be lost or degraded when you save this workbook in the currently selected file format. Click Continue to save the workbook anyway. To keep all of your features, click Cancel and then save the file in one of the new file formats." "Significant loss of functionality" "One or more cells in this workbook contain data validation rules which refer to values on other worksheets. These data validation rules will not be saved." When I click 'Find', some cells that do indeed have validation rules are highlighted, but those rules are all on the same worksheet! We're using simple list-based validation, with some cells off to the side containing the valid values (for example, cell B4 has a List with Source "=$D$4:$E$4") This makes no sense to me whatsoever. One, the workbook was created in Excel 2003, so obviously we couldn't implement a feature that doesn't exist. Secondly, the modifications we're making don't involve changing the validation rules at all. Thirdly, the complaint that Excel is making is incorrect! All of the rules are on the same worksheet as the target. As if the story wasn't bizarre enough: I went ahead and saved the worksheet with Excel 2010. I then went to an old computer back in the lab and opened the document with Excel 2003. Guess what - the validations were untouched! My questions are: is this a legitimate bug in Excel 2010, or is this some exotic error in the legacy .xls worksheet that is confusing the heck out of Excel 2010? Has anyone else observed this issue working in compatibility mode?

  Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >