Search Results

Search found 10941 results on 438 pages for 'location'.

Page 430/438 | < Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >

  • IIS SSL Certificate Renewal Pain

    - by Rick Strahl
    I’m in the middle of my annual certificate renewal for the West Wind site and I can honestly say that I hate IIS’s certificate system.  When it works it’s fine, but when it doesn’t man can it be a pain. Because I deal with public certificates on my site merely once a year, and you have to perform the certificate dance just the right way, I seem to run into some sort of trouble every year, thinking that Microsoft surely must have addressed the issues I ran into previously – HA! Not so. Don’t ever use the Renew Certificate Feature in IIS! The first rule that I should have never forgotten is that certificate renewals in IIS (7 is what I’m using but I think it’s no different in 7.5 and 8), simply don’t work if you’re submitting to get a public certificate from a certificate authority. I use DNSimple for my DNS domain management and SSL certificates because they provide ridiculously easy domain management and good prices for SSL certs – especially wildcard certificates, which is what I use on west-wind.com. Certificates in IIS can be found pegged to the machine root. If you go into the IIS Manager, go to the machine root the tree and then click on certificates and you then get various certificate options: Both of these options create a new Certificate request (CSR), which is just a text file. But if you’re silly enough like me to click on the Renew button on your old certificate, you’ll find that you end up generating a very long Certificate Request that looks nothing like the original certificate request and the format that’s used for this is not accepted by most certificate authorities. While I’m not sure exactly what the problem is, it simply looks like IIS is respecting none of your original certificate bit size choices and is generating a huge certificate request that is 3 times the size of a ‘normal’ certificate request. The end result is (and I’ve done this at least twice now) is that the certificate processor is likely to fail processing those renewals. Always create a new Certificate While it’s a little more work and you have to remember how to fill out the certificate request properly, this is the safe way to make sure your certificate generates properly. First comes the Distinguished Name Properties dialog: Ah yes you have to love the nomenclature of this stuff. Distinguished name, Common name – WTF is a common name? It doesn’t look common to me! Make sure this form gets filled out correctly. Common NameThis is the domain name of the Web site. In my case I’m creating a wildcard certificate so I’m using the * prefix. If you’re purchasing a certificate for a specific domain use www.west-wind.com or store.west-wind.com for example. Make sure this matches the EXACT domain you’re trying to use secure access on because that’s all the certificate is going to work on unless you get a wildcard certificate. Organization Is the name of your company or organization. Depending on the kind of certificate you purchase this name will show up on your certificate. Most low end SSL certificates (ie. those that cost under $100 for single domains) don’t list the organization, the higher signature certificates that also require extensive validation by the cert authority do. Regardless you should make sure this matches the right company/organization. Organizational Unit This can be anything. Not really sure what this is for, but traditionally I’ve always set this to Web because – well this is a Web thing after all right? I’ve never seen this used anywhere that I can tell other than to internally reference the cert. State and CountryPretty obvious. Should reflect the location of the business/organization/person or site.   Next you have to configure the bit size used for the certificate: The default on this dialog is 1024, but I’ve found that most providers these days request a minimum bit length of 2048, as did my DNSimple provider. Again check with the provider when you submit to make sure. Bit length mismatches can cause problems if you use a size that isn’t supported by the provider. I had that happen last year when I submitted my CSR and it got rejected quite a bit later, when the certs usually are issued within an hour or less. When you’re done here, the certificate is saved to disk as a .txt file and it should look something like this (this is a 2048 bit length CSR):-----BEGIN NEW CERTIFICATE REQUEST----- MIIEVGCCAz0CAQAwdjELMAkGA1UEBhMCVVMxDzANBgNVBAgMBkhhd2FpaTENMAsG A1UEBwwEUGFpYTEfMB0GA1UECgwWV2VzdCBXaW5kIFRlY2hub2xvZ2llczEMMAoG B1UECwwDV2ViMRgwFgYDVQQDDA8qLndlc3Qtd2luZC5jb20wggEiMA0GCSqGSIb3 DQEBAQUAA4IBDwAwggEKAoIBAQDIPWOFMkMVRp2Ftj9w/cCVV4OYYhoZYtl+8lTk oqDwKca0xWHLgioX/9v0rZLS6a82MHqKEBxVXu+cuCmSE4AQtB/1YH9lS4tpc/be OZDvnTotP6l4MCEzzAfROcw4CiIg6X0RMSnl8IATAvv2V5LQM9TDdt9oDdMpX2IY +vVC9RZ7PMHBmR9kwI2i/lrKitzhQKaHgpmKcRlM6iqpALUiX28w5HJaDKK1MDHN 607tyFJLHijuJKx7PdTqZYf50KkC3NupfZ2avVycf18Q13jHWj59tvwEOczoVzRL l4LQivAqbhyiqMpWnrZunIOUZta5aGm+jo7O1knGWJjxuraTAgMBAAGgggGYMBoG CisGAQQBgjcNAgMxDBYKNi4yLjkyMDAuMjA0BgkrBgEEAYI3FRQxJzAlAgEFDAZS QVNYUFMMC1JBU1hQU1xSaWNrDAtJbmV0TWdyLmV4ZTByBgorBgEEAYI3DQICMWQw YgIBAR5aAE0AaQBjAHIAbwBzAG8AZgB0ACAAUgBTAEEAIABTAEMAaABhAG4AbgBl AGwAIABDAHIAeQBwAHQAbwBnAHIAYQBwAGgAaQBjACAAUAByAG8AdgBpAGQAZQBy AwEAMIHPBgkqhkiG9w0BCQ4xgcEwgb4wDgYDVR0PAQH/BAQDAgTwMBMGA1UdJQQM MAoGCCsGAQUFBwMBMHgGCSqGSIb3DQEJDwRrMGkwDgYIKoZIhvcNAwICAgCAMA4G CCqGSIb3DQMEAgIAgDALBglghkgBZQMEASowCwYJYIZIAWUDBAEtMAsGCWCGSAFl AwQBAjALBglghkgBZQMEAQUwBwYFKw4DAgcwCgYIKoZIhvcNAwcwHQYDVR0OBBYE FD/yOsTbXE+GVFCFMmldzQvyloz9MA0GCSqGSIb3DQEBBQUAA4IBAQCK6LlsCuIM 1AU0niB6QZ9v0FTsGFxP1dYvVUnJyY6VEKNiGFiQjZac7UCs0p58yScdXWEFOE8V OsjAYD3xYNc05+ckyD67UHRGEUAVB9RBvbKW23KeR/8kBmEzc8PemD52YOgExxAJ 57xWmAwEHAvbgYzQvhO8AOzH3TGvvHbg5UKM1pYgNmuwZq5DkL/IDoeIJwfk/wrI wghNTuxxIFgbH4YrgLgv4PRvrS/LaTCRBdboaCgzATMczaOb1nd/DVNR+3fCtMhM W0psTAjzRbmXF3nJyAQa7jF/52gkY0RfFX2lG5tJnG+XDsVNvKNvh9Qa5Tlmkm06 ILKCm9ciWCKk -----END NEW CERTIFICATE REQUEST----- You can take that certificate request and submit that to your certificate provider. Since this is base64 encoded you can typically just paste it into a text box on the submission page, or some providers will ask you to upload the CSR as a file. What does a Renewal look like? Note the length of the CSR will vary somewhat with key strength, but compare this to a renewal request that IIS generated from my existing site:-----BEGIN NEW CERTIFICATE REQUEST----- MIIPpwYFKoZIhvcNAQcCoIIPmDCCD5QCAQExCzAJBgUrDgMCGgUAMIIIqAYJKoZI hvcNAQcBoIIImQSCCJUwggiRMIIH+gIBADBdMSEwHwYDVQQLDBhEb21haW4gQ29u dHJvbCBWYWxpFGF0ZWQxHjAcBgNVBAsMFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEY MBYGA1UEAwwPKi53ZXN0LXdpbmQuY29tMIGfMA0GCSqGSIb3DQEBAQUAA4GNADCB iQKBgQCK4OuIOR18Wb8tNMGRZiD1c9X57b332Lj7DhbckFqLs0ys8kVDHrTXSj+T Ye9nmAvfPpZmBtE5p9qRNN79rUYugAdl+qEtE4IJe1bRfxXzcKa1SXa8+TEs3zQa zYSmcR2dDuC8om1eAdeCtt0NnkvANgm1VLwGOor/UHMASaEhCQIDAQABoIIG8jAa BgorBgEEAYI3DQIDMQwWCjYuMi45MjAwLjIwNAYJKwYBBAGCNxUUMScwJQIBBQwG UkFTWFBTDAtSQVNYUFNcUmljawwLSW5ldE1nci5leGUwZgYKKwYBBAGCNw0CAjFY MFYCAQIeTgBNAGkAYwByAG8AcwBvAGYAdAAgAFMAdAByAG8AbgBnACAAQwByAHkA cAB0AG8AZwByAGEAcABoAGkAYwAgAFAAcgBvAHYAaQBkAGUAcgMBADCCAQAGCSqG SIb3DQEJDjGB8jCB7zAOBgNVHQ8BAf8EBAMCBaAwDAYDVR0TAQH/BAIwADA0BgNV HSUELTArBggrBgEFBQcDAQYIKwYBBQUHAwIGCisGAQQBgjcKAwMGCWCGSAGG+EIE ATBPBgNVHSAESDBGMDoGCysGAQQBsjEBAgIHMCswKQYIKwYBBQUHAgEWHWh0dHBz Oi8vc2VjdXJlLmNvbW9kby5jb20vQ1BTMAgGBmeBDAECATApBgNVHREEIjAggg8q Lndlc3Qtd2luZC5jb22CDXdlc3Qtd2luZC5jb20wHQYDVR0OBBYEFEVLAyO8gDiv lsfovKrx9mHPyrsiMIIFMAYJKwYBBAGCNw0BMYIFITCCBR0wggQFoAMCAQICEQDu 1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRsw GQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAY BgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVkMRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wg Q0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUwNjA2MjM1OTU5WjBdMSEwHwYDVQQLExhE b21haW4gQ29udHJvbCBWYWxpZGF0ZWQxHjAcBgNVBAsTFUVzc2VudGlhbFNTTCBX aWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0LXdpbmQuY29tMIIBIjANBgkqhkiG9w0B AQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66XB51DlUfm6xXqJBcvMU2qorRHxC+WjEpB amvg8XoqNfCKzDAvLMbY4BLhbYCTagqtslnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJM CHufZ5RDtuTuxhTdJxzP9YqZUfKV5abWQp/TK6V1ryaBJvdqM73q4tRjrQODtkiR PfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8 UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+wDNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfO a7iZMVGbqDg6rkS//2uGe6tSQJTTs+mAZB+na+M8XT2UqwIDAQABo4IBwTCCAb0w HwYDVR0jBBgwFoAU2svqrVsIXcz//CZUzknlVcY49PgwHQYDVR0OBBYEFH0AmLiL RSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB/wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQG A1UdJQQtMCsGCCsGAQUFBwMBBggrBgEFBQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4 QgQBME8GA1UdIARIMEYwOgYLKwYBBAGyMQECAgcwKzApBggrBgEFBQcCARYdaHR0 cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9DUFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIw MKAuoCyGKmh0dHA6Ly9jcmwuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBLmNy bDBuBggrBgEFBQcBAQRiMGAwOAYIKwYBBQUHMAKGLGh0dHA6Ly9jcnQuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBXzIuY3J0MCQGCCsGAQUFBzABhhhodHRwOi8v b2NzcC5jb21vZG9jYS5jb20wKQYDVR0RBCIwIIIPKi53ZXN0LXdpbmQuY29tgg13 ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEBBQUAA4IBAQBqBfd6QHrxXsfgfKARG6np 8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8 YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXSsBxBdNz8RYTthPMu1h09C0XuDB30sztg nR692FrxJN5/bXsk+MC9nEweTFW/t2HW+XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lD csZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0tCbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk 9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlcrfFP2PK7XcEwWizsvMrNqLyvQVNXSUPT MA0GCSqGSIb3DQEBBQUAA4GBABt/NitwMzc5t22p5+zy4HXbVYzLEjesLH8/v0ot uLQ3kkG8tIWNh5RplxIxtilXt09H4Oxpo3fKUN0yw+E6WsBfg0sAF8pHNBdOJi48 azrQbt4HvKktQkGpgYFjLsormjF44SRtToLHlYycDHBNvjaBClUwMCq8HnwY6vDq xikRoIIFITCCBR0wggQFoAMCAQICEQDu1E1T5Jvtkm5LOfSHabWlMA0GCSqGSIb3 DQEBBQUAMHIxCzAJBgNVBAYTAkdCMRswGQYDVQQIExJHcmVhdGVyIE1hbmNoZXN0 ZXIxEDAOBgNVBAcTB1NhbGZvcmQxGjAYBgNVBAoTEUNPTU9ETyBDQSBMaW1pdGVk MRgwFgYDVQQDEw9Fc3NlbnRpYWxTU0wgQ0EwHhcNMTQwNTA3MDAwMDAwWhcNMTUw NjA2MjM1OTU5WjBdMSEwHwYDVQQLExhEb21haW4gQ29udHJvbCBWYWxpZGF0ZWQx HjAcBgNVBAsTFUVzc2VudGlhbFNTTCBXaWxkY2FyZDEYMBYGA1UEAxQPKi53ZXN0 LXdpbmQuY29tMIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAiyKfL66X B51DlUfm6xXqJBcvMU2qorRHxC+WjEpBamvg8XoqNfCKzDAvLMbY4BLhbYCTagqt slnP3Gj4AKhXqRKU0n6iSbmS1gcWzCJMCHufZ5RDtuTuxhTdJxzP9YqZUfKV5abW Qp/TK6V1ryaBJvdqM73q4tRjrQODtkiRPfZjxpybnBHFJS8jYAf8jcOjSDZcgN1d 9Evc5MrEJCp/90cAkozyF/NMcFtD6Yj8UM97z3MzDT2JPDoH3kAr3cCgpUNyQ2+w DNCnL9eWYFkOQi8FZMsZol7KlZ5NgNfOa7iZMVGbqDg6rkS//2uGe6tSQJTTs+mA ZB+na+M8XT2UqwIDAQABo4IBwTCCAb0wHwYDVR0jBBgwFoAU2svqrVsIXcz//CZU zknlVcY49PgwHQYDVR0OBBYEFH0AmLiLRSEL9+sQD/n5O4N7/nnqMA4GA1UdDwEB /wQEAwIFoDAMBgNVHRMBAf8EAjAAMDQGA1UdJQQtMCsGCCsGAQUFBwMBBggrBgEF BQcDAgYKKwYBBAGCNwoDAwYJYIZIAYb4QgQBME8GA1UdIARIMEYwOgYLKwYBBAGy MQECAgcwKzApBggrBgEFBQcCARYdaHR0cHM6Ly9zZWN1cmUuY29tb2RvLmNvbS9D UFMwCAYGZ4EMAQIBMDsGA1UdHwQ0MDIwMKAuoCyGKmh0dHA6Ly9jcmwuY29tb2Rv Y2EuY29tL0Vzc2VudGlhbFNTTENBLmNybDBuBggrBgEFBQcBAQRiMGAwOAYIKwYB BQUHMAKGLGh0dHA6Ly9jcnQuY29tb2RvY2EuY29tL0Vzc2VudGlhbFNTTENBXzIu Y3J0MCQGCCsGAQUFBzABhhhodHRwOi8vb2NzcC5jb21vZG9jYS5jb20wKQYDVR0R BCIwIIIPKi53ZXN0LXdpbmQuY29tgg13ZXN0LXdpbmQuY29tMA0GCSqGSIb3DQEB BQUAA4IBAQBqBfd6QHrxXsfgfKARG6np8yszIPhHGPPmaE7xq7RpcZjY9H+8l6fe 4jQbGFjbA5uHBklYI4m2snhPaW2p8iF8YOkm2V2hEsSTnkf5/flw9mZtlCFEDFXS sBxBdNz8RYTthPMu1h09C0XuDB30sztgnR692FrxJN5/bXsk+MC9nEweTFW/t2HW +XZ8bhM7vsAS+pZionR4MyuQ0mYIt/lDcsZVZ91KxTsIm8rNMkkYGFoSIXjQ0+0t CbxMF0i2qnpmNRpA6PU8l7lxxvPkplsk9KB8QIPFrR5p/i/SUAd9vECWh5+/ktlc rfFP2PK7XcEwWizsvMrNqLyvQVNXSUPTMYIBrzCCAasCAQEwgYcwcjELMAkGA1UE BhMCR0IxGzAZBgNVBAgTEkdyZWF0ZXIgTWFuY2hlc3RlcjEQMA4GA1UEBxMHU2Fs Zm9yZDEaMBgGA1UEChMRQ09NT0RPIENBIExpbWl0ZWQxGDAWBgNVBAMTD0Vzc2Vu dGlhbFNTTCBDQQIRAO7UTVPkm+2Sbks59IdptaUwCQYFKw4DAhoFADANBgkqhkiG 9w0BAQEFAASCAQB8PNQ6bYnQpWfkHyxnDuvNKw3wrqF2p7JMZm+SuN2qp3R2LpCR mW2LrGtQIm9Iob/QOYH+8houYNVdvsATGPXX2T8gzn+anof4tOG0vCTK1Bp9bwf9 MkRP+1c8RW/vkYmUW4X5/C+y3CZpMH5dDTaXBIpXFzjX/fxNpH/rvLzGiaYYL3Cn OLO+aOADr9qq5yoqwpiYCSfYNNYKTUNNGfYIidQwYtbHXEYhSukB2oR89xD2sZZ4 bOqFjUPgTa5SsERLDDeg3omMKiIXVYGxlqBEq51Kge6IQt4qQV9P9VgInW7cWmKe dTqNHI9ri3ttewdEnT++TKGKKfTjX9SR8Waj -----END NEW CERTIFICATE REQUEST----- Clearly there’s something very different between this an my original request! And it didn’t work. IIS creates a custom CSR that is encoded in a format that no certificate authority I’ve ever used uses. If you want the gory details of what’s in there look at this ServerFault question (thanks to Mika in the comments). In the end it doesn’t matter  though – no certificate authority knows what to do with this CSR. So create a new CSR and skip the renewal. Always! Use the same Server Keep in mind that on IIS at least you should always create your certificate on a single server and then when you receive the final certificate from your provider import it on that server. IIS tracks the CSR it created and requires it in order to import the final certificate properly. So if for some reason you try to install the certificate on another server, it won’t work. I’ve also run into trouble trying to install the same certificate twice – this time around I didn’t give my certificate the proper friendly name and IIS failed to allow me to assign the certificate to any of my Web sites. So I removed the certificate and tried to import again, only to find it failed the second time around. There are other ways to fix this, but in my case I had to have the certificate re-issued to work – not what you want to do. Regardless of what you do though, when you import make sure you do it right the first time by crossing all your t’s and dotting your i's– it’ll save you a lot of grief! You don’t actually have to use the server that the certificate gets installed on to generate the CSR and first install it, but it is generally a good idea to do so just so you can get the certificate installed into the right place right away. If you have access to the server where you need to install the certificate you might as well use it. But you can use another machine to generated the and install the certificate, then export the certificate and move it to another machine as needed. So you can use your Dev machine to create a certificate then export it and install it on a live server. More on installation and back up/export later. Installing the Certificate Once you’ve submitted a CSR request your provider will process the request and eventually issue you a new final certificate that contains another text file with the final key to import into your certificate store. IIS does this by combining the content in your certificate request with the original CSR. If all goes well your new certificate shows up in the certificate list and you’re ready to assign the certificate to your sites. Make sure you use a friendly name that matches domain name of your site. So use *.mysite.com or www.mysite.com or store.mysite.com to ensure IIS recognizes the certificate. I made the mistake of not naming my friendly name this way and found that IIS was unable to link my sites to my wildcard certificate. It needed to have the *. as part of the certificate otherwise the Hostname input field was blanked out. Changing the Friendly Name If you by accidentally used an invalid friendly name you can change it later in the Windows certificate store. Bring up a Run Box Type MMC File | Add/Remove Snap In Add Certificates | Computer Account | Local Computer Drill into Certificates | Personal | Certificates Find your Certificate | Right Click | Properties Edit the Friendly Name | Click OK Backing up your Certificate The first thing you should do once your certificate is successfully installed is to back it up! In case your server crashes or you otherwise lose your configuration this will ensure you have an easy way to recover and reinstall your certificate either on the same server or a different one. If you’re running a server farm or using a wildcard certificate you also need to get the certificate onto other machines and a PFX file import is the easiest way to do this. To back up your certificate select your certificate and choose Export from the context or sidebar menu: The Export Certificate option allows you to export a password protected binary file that you can import in a single step. You can copy the resulting binary PFX file to back up or copy to other machines to install on. Importing the certificate on another machine is as easy as pointing at the PFX file and specifying the password. IIS handles the rest. Assigning a new certificate to your Site Once you have the new certificate installed, all that’s left to do is assign it to your site. In IIS select your Web site and bring up the Site Bindings from the right sidebar. Add a new binding for https, bind it to port 443, specify your hostname and pick the certificate from the pick list. If you’re using a root site make sure to set up your certificate for www.yoursite.com and also for yoursite.com so that both work properly with SSL. Note that you need to explicitly configure each hostname for a certificate if you plan to use SSL. Luckily if you update your SSL certificate in the following year, IIS prompts you and asks whether you like to update all other sites that are using the existing cert to the newer cert. And you’re done. So what’s the Pain? So, all of this is old hat and it doesn’t look all that bad right? So what’s the pain here? Well if you follow the instructions and do everything right, then the process is about as straight forward as you would expect it to be. You create a cert request, you import it and assign it to your sites. That’s the basic steps and to be perfectly fair it works well – if nothing goes wrong. However, renewing tends to be the problem. The first unintuitive issue is that you simply shouldn’t renew but create a new CSR and generate your new certificate from that. Over the years I’ve fallen prey to the belief that Microsoft eventually will fix this so that the renewal creates the same type of CSR as the old cert, but apparently that will just never happen. Booo! The other problem I ran into is that I accidentally misnamed my imported certificate which in turn set off a chain of events that caused my originally issued certificate to become uninstallable. When I received my completed certificate I installed it and it installed just fine, but the friendly name was wrong. As a result IIS refused to assign the certificate to any of my host headered sites. That’s strike number one. Why the heck should the friendly name have any effect on the ability to attach the certificate??? Next I uninstalled the certificate because I figured that would be the easiest way to make sure I get it right. But I found that I could not reinstall my certificate. I kept getting these stop errors: "ASN1 bad tag value met" that would prevent the installation from completion. After searching around for this error and reading countless long messages on forums, I found that this error supposedly does not actually mean the install failed, but the list wouldn’t refresh. Commodo has this to say: Note: There is a known issue in IIS 7 giving the following error: "Cannot find the certificate request associated with this certificate file. A certificate request must be completed on the computer where it was created." You may also receive a message stating "ASN1 bad tag value met". If this is the same server that you generated the CSR on then, in most cases, the certificate is actually installed. Simply cancel the dialog and press "F5" to refresh the list of server certificates. If the new certificate is now in the list, you can continue with the next step. If it is not in the list, you will need to reissue your certificate using a new CSR (see our CSR creation instructions for IIS 7). After creating a new CSR, login to your Comodo account and click the 'replace' button for your certificate. Not sure if this issue is fixed in IIS 8 but that’s an insane bug to have crop up. As it turns out, in my case the refresh didn’t work and the certificate didn’t show up in the IIS list after the reinstall. In fact when looking at the certificate store I could see my certificate was installed in the right place, but the private key is missing which is most likely why IIS is not picking it up. It looks like IIS could not match the final cert to the original CSR generated. But again some sort of message to that affect might be helpful instead of ASN1 bad tag value met. Recovering the Private Key So it turns out my original problem was that I received the published key, but when I imported the private key was missing. There’s a relatively easy way to recover from this. If your certificate doesn’t show up in IIS check in the certificate store for the local machine (see steps above on how to bring this up). If you look at the certificate in Certificates/Personal/Certificates make sure you see the key as shown in the image below: if the key is missing it means that the certificate is missing the private key most likely. To fix a certificate you can do the following: Double click the certificate Go to the Details Tab Copy down the Serial number You can copy the serial number from the area blurred out above. The serial number will be in a format like ?00 a7 9b a1 a4 9d 91 63 57 d6 9f 26 b8 ee 79 b5 cb and you’ll need to strip out the spaces in order to use it in the next step. Next open up an Administrative command prompt and issue the following command: certutil -repairstore my 00a79ba1a49d916357d69f26b8ee79b5cb You should get a confirmation message that the repair worked. If you now go back to the certificate store you should now see the key icon show up on the certificate. Your certificate is fixed. Now go back into IIS Manager and refresh the list of certificates and if all goes well you should see all the certificates that showed in the cert store now: Remember – back up the key first then map to your site… Summary I deal with a lot of customers who run their own IIS servers, and I can’t tell you how often I hear about botched SSL installations. When I posted some of my issues on Twitter yesterday I got a hell storm of “me too” responses. I’m clearly not the only one, who’s run into this especially with renewals. I feel pretty comfortable with IIS configuration and I do a lot of it for support purposes, but the SSL configuration is one that never seems to go seamlessly. This blog post is meant as reminder to myself to read next time I do a renewal. So I can dot my i's and dash my t’s before I get caught in the mess I’m dealing with today. Hopefully some of you find this useful as well.© Rick Strahl, West Wind Technologies, 2005-2014Posted in IIS7  Security   Tweet !function(d,s,id){var js,fjs=d.getElementsByTagName(s)[0];if(!d.getElementById(id)){js=d.createElement(s);js.id=id;js.src="//platform.twitter.com/widgets.js";fjs.parentNode.insertBefore(js,fjs);}}(document,"script","twitter-wjs"); (function() { var po = document.createElement('script'); po.type = 'text/javascript'; po.async = true; po.src = 'https://apis.google.com/js/plusone.js'; var s = document.getElementsByTagName('script')[0]; s.parentNode.insertBefore(po, s); })();

    Read the article

  • Compat Wireless Drivers Centrino N-2230

    - by user2699451
    So I am using linux and am having trouble installing the Compat Wireless drivers Hardware: Intel Centrino N-2230 OS: Linux Mint 64bit (kernel 13.08-generic) I followed this link http://www.mathyvanhoef.com/2012/09/compat-wireless-injection-patch-for.html Output: apt-get install linux-headers-$(uname -r) Reading package lists... Done Building dependency tree Reading state information... Done linux-headers-3.8.0-19-generic is already the newest version. 0 upgraded, 0 newly installed, 0 to remove and 19 not upgraded. charles-W55xEU compat-wireless-2010-10-16 # cd ~ charles-W55xEU ~ # dir adt-bundle-linux-x86_64-20130917.zip Desktop known_hosts_backup charles-W55xEU ~ # wget http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.6/compat-wireless-3.6.2-1-snp.tar.bz2 --2013-10-29 10:28:23-- http://www.orbit-lab.org/kernel/compat-wireless-3-stable/v3.6/compat-wireless-3.6.2-1-snp.tar.bz2 Resolving www.orbit-lab.org (www.orbit-lab.org)... 128.6.192.131 Connecting to www.orbit-lab.org (www.orbit-lab.org)|128.6.192.131|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 4443700 (4,2M) [application/x-bzip2] Saving to: ‘compat-wireless-3.6.2-1-snp.tar.bz2’ 100%[======================================>] 4 443 700 13,5KB/s in 11m 3s 2013-10-29 10:39:27 (6,55 KB/s) - ‘compat-wireless-3.6.2-1-snp.tar.bz2’ saved [4443700/4443700] charles-W55xEU ~ # tar -xf compat-wireless-3.6.2-1-snp.tar.bz2 charles-W55xEU ~ # cd compat-wireless-3.6-rc6-1 bash: cd: compat-wireless-3.6-rc6-1: No such file or directory charles-W55xEU ~ # dir adt-bundle-linux-x86_64-20130917.zip Desktop compat-wireless-3.6.2-1-snp known_hosts_backup compat-wireless-3.6.2-1-snp.tar.bz2 charles-W55xEU ~ # cd compat-wireless-3.6.2-1-snp/ charles-W55xEU compat-wireless-3.6.2-1-snp # dir code-metrics.txt defconfigs linux-next-pending pending-stable compat drivers MAINTAINERS README config.mk enable-older-kernels Makefile scripts COPYRIGHT include net udev crap linux-next-cherry-picks patches charles-W55xEU compat-wireless-3.6.2-1-snp # wget http://patches.aircrack-ng.org/mac80211.compat08082009.wl_frag+ack_v1.patch --2013-10-29 10:40:52-- http://patches.aircrack-ng.org/mac80211.compat08082009.wl_frag+ack_v1.patch Resolving patches.aircrack-ng.org (patches.aircrack-ng.org)... 213.186.33.2, 2001:41d0:1:1b00:213:186:33:2 Connecting to patches.aircrack-ng.org (patches.aircrack-ng.org)|213.186.33.2|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 1049 (1,0K) [text/plain] Saving to: ‘mac80211.compat08082009.wl_frag+ack_v1.patch’ 100%[======================================>] 1 049 --.-K/s in 0s 2013-10-29 10:40:56 (180 MB/s) - ‘mac80211.compat08082009.wl_frag+ack_v1.patch’ saved [1049/1049] charles-W55xEU compat-wireless-3.6.2-1-snp # patch -p1 < mac80211.compat08082009.wl_frag+ack_v1.patch patching file net/mac80211/tx.c Hunk #1 succeeded at 792 (offset 115 lines). charles-W55xEU compat-wireless-3.6.2-1-snp # wget -Ocompatwireless_chan_qos_frag.patch http://pastie.textmate.org/pastes/4882675/download --2013-10-29 10:43:18-- http://pastie.textmate.org/pastes/4882675/download Resolving pastie.textmate.org (pastie.textmate.org)... 178.79.137.125 Connecting to pastie.textmate.org (pastie.textmate.org)|178.79.137.125|:80... connected. HTTP request sent, awaiting response... 301 Moved Permanently Location: http://pastie.org/pastes/4882675/download [following] --2013-10-29 10:43:20-- http://pastie.org/pastes/4882675/download Resolving pastie.org (pastie.org)... 96.126.119.119 Connecting to pastie.org (pastie.org)|96.126.119.119|:80... connected. HTTP request sent, awaiting response... 200 OK Length: 2036 (2,0K) [application/octet-stream] Saving to: ‘compatwireless_chan_qos_frag.patch’ 100%[======================================>] 2 036 --.-K/s in 0,001s 2013-10-29 10:43:21 (3,35 MB/s) - ‘compatwireless_chan_qos_frag.patch’ saved [2036/2036] charles-W55xEU compat-wireless-3.6.2-1-snp # patch -p1 < compatwireless_chan_qos_frag.patch patching file drivers/net/wireless/rtl818x/rtl8187/dev.c patching file net/mac80211/tx.c Hunk #1 succeeded at 1495 (offset 8 lines). patching file net/wireless/chan.c charles-W55xEU compat-wireless-3.6.2-1-snp # make ./scripts/gen-compat-autoconf.sh /root/compat-wireless-3.6.2-1-snp/.config /root/compat-wireless-3.6.2-1-snp/config.mk > include/linux/compat_autoconf.h make -C /lib/modules/3.8.0-19-generic/build M=/root/compat-wireless-3.6.2-1-snp modules make[1]: Entering directory `/usr/src/linux-headers-3.8.0-19-generic' CC [M] /root/compat-wireless-3.6.2-1-snp/compat/main.o LD [M] /root/compat-wireless-3.6.2-1-snp/compat/compat.o CC [M] /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.o In file included from /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma.h:8:0, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/bcma_private.h:8, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:8: /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma_driver_pci.h:217:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_core_pci_init’ In file included from /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma.h:10:0, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/bcma_private.h:8, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:8: /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma_driver_gmac_cmn.h:95:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_core_gmac_cmn_init’ In file included from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:8:0: /root/compat-wireless-3.6.2-1-snp/drivers/bcma/bcma_private.h:25:15: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_bus_register’ /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:152:15: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_bus_register’ /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:17:21: warning: ‘bcma_bus_next_num’ defined but not used [-Wunused-variable] /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:93:12: warning: ‘bcma_register_cores’ defined but not used [-Wunused-function] make[3]: *** [/root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.o] Error 1 make[2]: *** [/root/compat-wireless-3.6.2-1-snp/drivers/bcma] Error 2 make[1]: *** [_module_/root/compat-wireless-3.6.2-1-snp] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-19-generic' make: *** [modules] Error 2 charles-W55xEU compat-wireless-3.6.2-1-snp # make install Warning: You may or may not need to update your initframfs, you should if any of the modules installed are part of your initramfs. To add support for your distribution to do this automatically send a patch against ./scripts/update-initramfs. If your distribution does not require this send a patch against the '/usr/bin/lsb_release -i -s': LinuxMint tag for your distribution to avoid this warning. make -C /lib/modules/3.8.0-19-generic/build M=/root/compat-wireless-3.6.2-1-snp modules make[1]: Entering directory `/usr/src/linux-headers-3.8.0-19-generic' CC [M] /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.o In file included from /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma.h:8:0, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/bcma_private.h:8, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:8: /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma_driver_pci.h:217:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_core_pci_init’ In file included from /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma.h:10:0, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/bcma_private.h:8, from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:8: /root/compat-wireless-3.6.2-1-snp/include/linux/bcma/bcma_driver_gmac_cmn.h:95:23: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_core_gmac_cmn_init’ In file included from /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:8:0: /root/compat-wireless-3.6.2-1-snp/drivers/bcma/bcma_private.h:25:15: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_bus_register’ /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:152:15: error: expected ‘=’, ‘,’, ‘;’, ‘asm’ or ‘__attribute__’ before ‘bcma_bus_register’ /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:17:21: warning: ‘bcma_bus_next_num’ defined but not used [-Wunused-variable] /root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.c:93:12: warning: ‘bcma_register_cores’ defined but not used [-Wunused-function] make[3]: *** [/root/compat-wireless-3.6.2-1-snp/drivers/bcma/main.o] Error 1 make[2]: *** [/root/compat-wireless-3.6.2-1-snp/drivers/bcma] Error 2 make[1]: *** [_module_/root/compat-wireless-3.6.2-1-snp] Error 2 make[1]: Leaving directory `/usr/src/linux-headers-3.8.0-19-generic' make: *** [modules] Error 2 charles-W55xEU compat-wireless-3.6.2-1-snp # It keeps giving errors, same with other sites, I get the same errors??? I am lost, help needed

    Read the article

  • OIM 11g notification framework

    - by Rajesh G Kumar
    OIM 11g has introduced an improved and template based Notifications framework. New release has removed the limitation of sending text based emails (out-of-the-box emails) and enhanced to support html features. New release provides in-built out-of-the-box templates for events like 'Reset Password', 'Create User Self Service' , ‘User Deleted' etc. Also provides new APIs to support custom templates to send notifications out of OIM. OIM notification framework supports notification mechanism based on events, notification templates and template resolver. They are defined as follows: Ø Events are defined as XML file and imported as part of MDS database in order to make notification event available for use. Ø Notification templates are created using OIM advance administration console. The template contains the text and the substitution 'variables' which will be replaced with the data provided by the template resolver. Templates support internationalization and can be defined as HTML or in form of simple text. Ø Template resolver is a Java class that is responsible to provide attributes and data to be used at runtime and design time. It must be deployed following the OIM plug-in framework. Resolver data provided at design time is to be used by end user to design notification template with available entity variables and it also provides data at runtime to replace the designed variable with value to be displayed to recipients. Steps to define custom notifications in OIM 11g are: Steps# Steps 1. Define the Notification Event 2. Create the Custom Template Resolver class 3. Create Template with notification contents to be sent to recipients 4. Create Event triggering spots in OIM 1. Notification Event metadata The Notification Event is defined as XML file which need to be imported into MDS database. An event file must be compliant with the schema defined by the notification engine, which is NotificationEvent.xsd. The event file contains basic information about the event.XSD location in MDS database: “/metadata/iam-features-notification/NotificationEvent.xsd”Schema file can be viewed by exporting file from MDS using weblogicExportMetadata.sh script.Sample Notification event metadata definition: 1: <?xml version="1.0" encoding="UTF-8"?> 2: <Events xmlns:xsi=http://www.w3.org/2001/XMLSchema-instance xsi:noNamespaceSchemaLocation="../../../metadata/NotificationEvent.xsd"> 3: <EventType name="Sample Notification"> 4: <StaticData> 5: <Attribute DataType="X2-Entity" EntityName="User" Name="Granted User"/> 6: </StaticData> 7: <Resolver class="com.iam.oim.demo.notification.DemoNotificationResolver"> 8: <Param DataType="91-Entity" EntityName="Resource" Name="ResourceInfo"/> 9: </Resolver> 10: </EventType> 11: </Events> Line# Description 1. XML file notation tag 2. Events is root tag 3. EventType tag is to declare a unique event name which will be available for template designing 4. The StaticData element lists a set of parameters which allow user to add parameters that are not data dependent. In other words, this element defines the static data to be displayed when notification is to be configured. An example of static data is the User entity, which is not dependent on any other data and has the same set of attributes for all event instances and notification templates. Available attributes are used to be defined as substitution tokens in the template. 5. Attribute tag is child tag for StaticData to declare the entity and its data type with unique reference name. User entity is most commonly used Entity as StaticData. 6. StaticData closing tag 7. Resolver tag defines the resolver class. The Resolver class must be defined for each notification. It defines what parameters are available in the notification creation screen and how those parameters are replaced when the notification is to be sent. Resolver class resolves the data dynamically at run time and displays the attributes in the UI. 8. The Param DataType element lists a set of parameters which allow user to add parameters that are data dependent. An example of the data dependent or a dynamic entity is a resource object which user can select at run time. A notification template is to be configured for the resource object. Corresponding to the resource object field, a lookup is displayed on the UI. When a user selects the event the call goes to the Resolver class provided to fetch the fields that are displayed in the Available Data list, from which user can select the attribute to be used on the template. Param tag is child tag to declare the entity and its data type with unique reference name. 9. Resolver closing tag 10 EventType closing tag 11. Events closing tag Note: - DataType needs to be declared as “X2-Entity” for User entity and “91-Entity” for Resource or Organization entities. The dynamic entities supported for lookup are user, resource, and organization. Once notification event metadata is defined, need to be imported into MDS database. Fully qualified resolver class name need to be define for XML but do not need to load the class in OIM yet (it can be loaded later). 2. Coding the notification resolver All event owners have to provide a resolver class which would resolve the data dynamically at run time. Custom resolver class must implement the interface oracle.iam.notification.impl.NotificationEventResolver and override the implemented methods with actual implementation. It has 2 methods: S# Methods Descriptions 1. public List<NotificationAttribute> getAvailableData(String eventType, Map<String, Object> params); This API will return the list of available data variables. These variables will be available on the UI while creating/modifying the Templates and would let user select the variables so that they can be embedded as a token as part of the Messages on the template. These tokens are replaced by the value passed by the resolver class at run time. Available data is displayed in a list. The parameter "eventType" specifies the event Name for which template is to be read.The parameter "params" is the map which has the entity name and the corresponding value for which available data is to be fetched. Sample code snippet: List<NotificationAttribute> list = new ArrayList<NotificationAttribute>(); long objKey = (Long) params.get("resource"); //Form Field details based on Resource object key HashMap<String, Object> formFieldDetail = getObjectFormName(objKey); for (Iterator<?> itrd = formFieldDetail.entrySet().iterator(); itrd.hasNext(); ) { NotificationAttribute availableData = new NotificationAttribute(); Map.Entry formDetailEntrySet = (Entry<?, ?>)itrd.next(); String fieldLabel = (String)formDetailEntrySet.getValue(); availableData.setName(fieldLabel); list.add(availableData); } return list; 2. Public HashMap<String, Object> getReplacedData(String eventType, Map<String, Object> params); This API would return the resolved value of the variables present on the template at the runtime when notification is being sent. The parameter "eventType" specifies the event Name for which template is to be read.The parameter "params" is the map which has the base values such as usr_key, obj_key etc required by the resolver implementation to resolve the rest of the variables in the template. Sample code snippet: HashMap<String, Object> resolvedData = new HashMap<String, Object>();String firstName = getUserFirstname(params.get("usr_key"));resolvedData.put("fname", firstName); String lastName = getUserLastName(params.get("usr_key"));resolvedData.put("lname", lastname);resolvedData.put("count", "1 million");return resolvedData; This code must be deployed as per OIM 11g plug-in framework. The XML file defining the plug-in is as below: <?xml version="1.0" encoding="UTF-8"?> <oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance"> <plugins pluginpoint="oracle.iam.notification.impl.NotificationEventResolver"> <plugin pluginclass= " com.iam.oim.demo.notification.DemoNotificationResolver" version="1.0" name="Sample Notification Resolver"/> </plugins> </oimplugins> 3. Defining the template To create a notification template: Log in to the Oracle Identity Administration Click the System Management tab and then click the Notification tab From the Actions list on the left pane, select Create On the Create page, enter values for the following fields under the Template Information section: Template Name: Demo template Description Text: Demo template Under the Event Details section, perform the following: From the Available Event list, select the event for which the notification template is to be created from a list of available events. Depending on your selection, other fields are displayed in the Event Details section. Note that the template Sample Notification Event created in the previous step being used as the notification event. The contents of the Available Data drop down are based on the event XML StaticData tag, the drop down basically lists all the attributes of the entities defined in that tag. Once you select an element in the drop down, it will show up in the Selected Data text field and then you can just copy it and paste it into either the message subject or the message body fields prefixing $ symbol. Example if list has attribute like First_Name then message body will contains this as $First_Name which resolver will parse and replace it with actual value at runtime. In the Resource field, select a resource from the lookup. This is the dynamic data defined by the Param DataType element in the XML definition. Based on selected resource getAvailableData method of resolver will be called to fetch the resource object attribute detail, if method is overridden with required implementation. For current scenario, Map<String, Object> params will get populated with object key as value and key as “resource” in the map. This is the only input will be provided to resolver at design time. You need to implement the further logic to fetch the object attributes detail to populate the available Data list. List string should not have space in between, if object attributes has space for attribute name then implement logic to replace the space with ‘_’ before populating the list. Example if attribute name is “First Name” then make it “First_Name” and populate the list. Space is not supported while you try to parse and replace the token at run time with real value. Make a note that the Available Data and Selected Data are used in the substitution tokens definition only, they do not define the final data that will be sent in the notification. OIM will invoke the resolver class to get the data and make the substitutions. Under the Locale Information section, enter values in the following fields: To specify a form of encoding, select either UTF-8 or ASCII. In the Message Subject field, enter a subject for the notification. From the Type options, select the data type in which you want to send the message. You can choose between HTML and Text/Plain. In the Short Message field, enter a gist of the message in very few words. In the Long Message field, enter the message that will be sent as the notification with Available data token which need to be replaced by resolver at runtime. After you have entered the required values in all the fields, click Save. A message is displayed confirming the creation of the notification template. Click OK 4. Triggering the event A notification event can be triggered from different places in OIM. The logic behind the triggering must be coded and plugged into OIM. Examples of triggering points for notifications: Event handlers: post process notifications for specific data updates in OIM users Process tasks: to notify the users that a provisioning task was executed by OIM Scheduled tasks: to notify something related to the task The scheduled job has two parameters: Template Name: defines the notification template to be sent User Login: defines the user record that will provide the data to be sent in the notification Sample Code Snippet: public void execute(String templateName , String userId) { try { NotificationService notService = Platform.getService(NotificationService.class); NotificationEvent eventToSend=this.createNotificationEvent(templateName,userId); notService.notify(eventToSend); } catch (Exception e) { e.printStackTrace(); } } private NotificationEvent createNotificationEvent(String poTemplateName, String poUserId) { NotificationEvent event = new NotificationEvent(); String[] receiverUserIds= { poUserId }; event.setUserIds(receiverUserIds); event.setTemplateName(poTemplateName); event.setSender(null); HashMap<String, Object> templateParams = new HashMap<String, Object>(); templateParams.put("USER_LOGIN",poUserId); event.setParams(templateParams); return event; } public HashMap getAttributes() { return null; } public void setAttributes() {} }

    Read the article

  • jQuery and Windows Azure

    - by Stephen Walther
    The goal of this blog entry is to describe how you can host a simple Ajax application created with jQuery in the Windows Azure cloud. In this blog entry, I make no assumptions. I assume that you have never used Windows Azure and I am going to walk through the steps required to host the application in the cloud in agonizing detail. Our application will consist of a single HTML page and a single service. The HTML page will contain jQuery code that invokes the service to retrieve and display set of records. There are five steps that you must complete to host the jQuery application: Sign up for Windows Azure Create a Hosted Service Install the Windows Azure Tools for Visual Studio Create a Windows Azure Cloud Service Deploy the Cloud Service Sign Up for Windows Azure Go to http://www.microsoft.com/windowsazure/ and click the Sign up Now button. Select one of the offers. I selected the Introductory Special offer because it is free and I just wanted to experiment with Windows Azure for the purposes of this blog entry.     To sign up, you will need a Windows Live ID and you will need to enter a credit card number. After you finish the sign up process, you will receive an email that explains how to activate your account. Accessing the Developer Portal After you create your account and your account is activated, you can access the Windows Azure developer portal by visiting the following URL: http://windows.azure.com/ When you first visit the developer portal, you will see the one project that you created when you set up your Windows Azure account (In a fit of creativity, I named my project StephenWalther).     Creating a New Windows Azure Hosted Service Before you can host an application in the cloud, you must first add a hosted service to your project. Click your project on the summary page and click the New Service link. You are presented with the option of creating either a new Storage Account or a new Hosted Services.     Because we have code that we want to run in the cloud – the WCF Service -- we want to select the Hosted Services option. After you select this option, you must provide a name and description for your service. This information is used on the developer portal so you can distinguish your services.     When you create a new hosted service, you must enter a unique name for your service (I selected jQueryApp) and you must select a region for this service (I selected Anywhere US). Click the Create button to create the new hosted service.   Install the Windows Azure Tools for Visual Studio We’ll use Visual Studio to create our jQuery project. Before you can use Visual Studio with Windows Azure, you must first install the Windows Azure Tools for Visual Studio. Go to http://www.microsoft.com/windowsazure/ and click the Get Tools and SDK button. The Windows Azure Tools for Visual Studio works with both Visual Studio 2008 and Visual Studio 2010.   Installation of the Windows Azure Tools for Visual Studio is painless. You just need to check some agreement checkboxes and click the Next button a few times and installation will begin:   Creating a Windows Azure Application After you install the Windows Azure Tools for Visual Studio, you can choose to create a Windows Azure Cloud Service by selecting the menu option File, New Project and selecting the Windows Azure Cloud Service project template. I named my new Cloud Service with the name jQueryApp.     Next, you need to select the type of Cloud Service project that you want to create from the New Cloud Service Project dialog.   I selected the C# ASP.NET Web Role option. Alternatively, I could have picked the ASP.NET MVC 2 Web Role option if I wanted to use jQuery with ASP.NET MVC or even the CGI Web Role option if I wanted to use jQuery with PHP. After you complete these steps, you end up with two projects in your Visual Studio solution. The project named WebRole1 represents your ASP.NET application and we will use this project to create our jQuery application. Creating the jQuery Application in the Cloud We are now ready to create the jQuery application. We’ll create a super simple application that displays a list of records retrieved from a WCF service (hosted in the cloud). Create a new page in the WebRole1 project named Default.htm and add the following code: <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> var products = [ {name:"Milk", price:4.55}, {name:"Yogurt", price:2.99}, {name:"Steak", price:23.44} ]; $("#productTemplate").render(products).appendTo("#productContainer"); </script> </body> </html> The jQuery code in this page simply displays a list of products by using a template. I am using a jQuery template to format each product. You can learn more about using jQuery templates by reading the following blog entry by Scott Guthrie: http://weblogs.asp.net/scottgu/archive/2010/05/07/jquery-templates-and-data-linking-and-microsoft-contributing-to-jquery.aspx You can test whether the Default.htm page is working correctly by running your application (hit the F5 key). The first time that you run your application, a database is set up on your local machine to simulate cloud storage. You will see the following dialog: If the Default.htm page works as expected, you should see the list of three products: Adding an Ajax-Enabled WCF Service In the previous section, we created a simple jQuery application that displays an array by using a template. The application is a little too simple because the data is static. In this section, we’ll modify the page so that the data is retrieved from a WCF service instead of an array. First, we need to add a new Ajax-enabled WCF Service to the WebRole1 project. Select the menu option Project, Add New Item and select the Ajax-enabled WCF Service project item. Name the new service ProductService.svc. Modify the service so that it returns a static collection of products. The final code for the ProductService.svc should look like this: using System.Collections.Generic; using System.ServiceModel; using System.ServiceModel.Activation; namespace WebRole1 { public class Product { public string name { get; set; } public decimal price { get; set; } } [ServiceContract(Namespace = "")] [AspNetCompatibilityRequirements(RequirementsMode = AspNetCompatibilityRequirementsMode.Allowed)] public class ProductService { [OperationContract] public IList<Product> SelectProducts() { var products = new List<Product>(); products.Add(new Product {name="Milk", price=4.55m} ); products.Add(new Product { name = "Yogurt", price = 2.99m }); products.Add(new Product { name = "Steak", price = 23.44m }); return products; } } }   In real life, you would want to retrieve the list of products from storage instead of a static array. We are being lazy here. Next you need to modify the Default.htm page to use the ProductService.svc. The jQuery script in the following updated Default.htm page makes an Ajax call to the WCF service. The data retrieved from the ProductService.svc is displayed in the client template. <!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd"> <html xmlns="http://www.w3.org/1999/xhtml"> <head> <title>Products</title> <style type="text/css"> #productContainer div { border:solid 1px black; padding:5px; margin:5px; } </style> </head> <body> <h1>Product Catalog</h1> <div id="productContainer"></div> <script id="productTemplate" type="text/html"> <div> Name: {{= name }} <br /> Price: {{= price }} </div> </script> <script src="Scripts/jquery-1.4.2.js" type="text/javascript"></script> <script src="Scripts/jquery.tmpl.js" type="text/javascript"></script> <script type="text/javascript"> $.post("ProductService.svc/SelectProducts", function (results) { var products = results["d"]; $("#productTemplate").render(products).appendTo("#productContainer"); }); </script> </body> </html>   Deploying the jQuery Application to the Cloud Now that we have created our jQuery application, we are ready to deploy our application to the cloud so that the whole world can use it. Right-click your jQueryApp project in the Solution Explorer window and select the Publish menu option. When you select publish, your application and your application configuration information is packaged up into two files named jQueryApp.cspkg and ServiceConfiguration.cscfg. Visual Studio opens the directory that contains the two files. In order to deploy these files to the Windows Azure cloud, you must upload these files yourself. Return to the Windows Azure Developers Portal at the following address: http://windows.azure.com/ Select your project and select the jQueryApp service. You will see a mysterious cube. Click the Deploy button to upload your application.   Next, you need to browse to the location on your hard drive where the jQueryApp project was published and select both the packaged application and the packaged application configuration file. Supply the deployment with a name and click the Deploy button.     While your application is in the process of being deployed, you can view a progress bar.     Running the jQuery Application in the Cloud Finally, you can run your jQuery application in the cloud by clicking the Run button.   It might take several minutes for your application to initialize (go grab a coffee). After WebRole1 finishes initializing, you can navigate to the following URL to view your live jQuery application in the cloud: http://jqueryapp.cloudapp.net/default.htm The page is hosted on the Windows Azure cloud and the WCF service executes every time that you request the page to retrieve the list of products. Summary Because we started from scratch, we needed to complete several steps to create and deploy our jQuery application to the Windows Azure cloud. We needed to create a Windows Azure account, create a hosted service, install the Windows Azure Tools for Visual Studio, create the jQuery application, and deploy it to the cloud. Now that we have finished this process once, modifying our existing cloud application or creating a new cloud application is easy. jQuery and Windows Azure work nicely together. We can take advantage of jQuery to build applications that run in the browser and we can take advantage of Windows Azure to host the backend services required by our jQuery application. The big benefit of Windows Azure is that it enables us to scale. If, all of the sudden, our jQuery application explodes in popularity, Windows Azure enables us to easily scale up to meet the demand. We can handle anything that the Internet might throw at us.

    Read the article

  • Another "Windows 7 entry missing from Grub2" Question

    - by 4x10
    Like many before me had the following problem that after installing Ubuntu (with windows 7 already installed), the grub boot loader wouldnt show windows 7 as a boot option, though i can boot fine if I use the "Choose Boot Device" options on the x220. The difference is that I try using UEFI only so many answers didn't really fit my problem, though i tried several stuffs: after running boot repair it destroyed the ubuntu boot loader custom entry in /etc/grub.d/40_custom for windows which doesnt show up many update-grub and reboots trying windows repair recovery thing while being there i also did bootrec.exe /FixBoot and update-grub and reboot again and finaly because it was so much fun, i installed linux all over again, while formatting and deleting everything linux related before that. Now that i think of it, Ubuntu also didn't notice Windows being there during the Setup and it still doesnt according to the Boot Info from Boot Repair. Boot Info Script 0.61-git-patched [23 April 2012] ============================= Boot Info Summary: =============================== => No boot loader is installed in the MBR of /dev/sda. sda1: __________________________________________________________________________ File system: vfat Boot sector type: Windows 7: FAT32 Boot sector info: No errors found in the Boot Parameter Block. Operating System: Boot files: /efi/Boot/bootx64.efi /efi/ubuntu/grubx64.efi sda2: __________________________________________________________________________ File system: Boot sector type: - Boot sector info: Mounting failed: mount: unknown filesystem type '' sda3: __________________________________________________________________________ File system: ntfs Boot sector type: Windows Vista/7: NTFS Boot sector info: No errors found in the Boot Parameter Block. Operating System: Windows 7 Boot files: /Windows/System32/winload.exe sda4: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Ubuntu precise (development branch) Boot files: /boot/grub/grub.cfg /etc/fstab sda5: __________________________________________________________________________ File system: ext4 Boot sector type: - Boot sector info: Operating System: Boot files: sda6: __________________________________________________________________________ File system: swap Boot sector type: - Boot sector info: ============================ Drive/Partition Info: ============================= Drive: sda _____________________________________________________________________ Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes Partition Boot Start Sector End Sector # of Sectors Id System /dev/sda1 1 625,142,447 625,142,447 ee GPT GUID Partition Table detected. Partition Start Sector End Sector # of Sectors System /dev/sda1 2,048 206,847 204,800 EFI System partition /dev/sda2 206,848 468,991 262,144 Microsoft Reserved Partition (Windows) /dev/sda3 468,992 170,338,303 169,869,312 Data partition (Windows/Linux) /dev/sda4 170,338,304 330,338,304 160,000,001 Data partition (Windows/Linux) /dev/sda5 330,338,305 617,141,039 286,802,735 Data partition (Windows/Linux) /dev/sda6 617,141,040 625,141,040 8,000,001 Swap partition (Linux) "blkid" output: ________________________________________________________________ Device UUID TYPE LABEL /dev/sda1 885C-ED1B vfat /dev/sda3 EE06CC0506CBCCB1 ntfs /dev/sda4 604dd3b2-64ca-4200-b8fb-820e8d0ca899 ext4 /dev/sda5 d62515fd-8120-4a74-b17b-0bdf244124a3 ext4 /dev/sda6 7078b649-fb2a-4c59-bd03-fd31ef440d37 swap ================================ Mount points: ================================= Device Mount_Point Type Options /dev/sda1 /boot/efi vfat (rw) /dev/sda4 / ext4 (rw,errors=remount-ro) /dev/sda5 /home ext4 (rw) =========================== sda4/boot/grub/grub.cfg: =========================== -------------------------------------------------------------------------------- # # DO NOT EDIT THIS FILE # # It is automatically generated by grub-mkconfig using templates # from /etc/grub.d and settings from /etc/default/grub # ### BEGIN /etc/grub.d/00_header ### if [ -s $prefix/grubenv ]; then set have_grubenv=true load_env fi set default="0" if [ "${prev_saved_entry}" ]; then set saved_entry="${prev_saved_entry}" save_env saved_entry set prev_saved_entry= save_env prev_saved_entry set boot_once=true fi function savedefault { if [ -z "${boot_once}" ]; then saved_entry="${chosen}" save_env saved_entry fi } function recordfail { set recordfail=1 if [ -n "${have_grubenv}" ]; then if [ -z "${boot_once}" ]; then save_env recordfail; fi; fi } function load_video { insmod efi_gop insmod efi_uga insmod video_bochs insmod video_cirrus } insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 if loadfont /usr/share/grub/unicode.pf2 ; then set gfxmode=auto load_video insmod gfxterm insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 set locale_dir=($root)/boot/grub/locale set lang=en_US insmod gettext fi terminal_output gfxterm if [ "${recordfail}" = 1 ]; then set timeout=-1 else set timeout=10 fi ### END /etc/grub.d/00_header ### ### BEGIN /etc/grub.d/05_debian_theme ### set menu_color_normal=white/black set menu_color_highlight=black/light-gray if background_color 44,0,30; then clear fi ### END /etc/grub.d/05_debian_theme ### ### BEGIN /etc/grub.d/10_linux ### function gfxmode { set gfxpayload="$1" if [ "$1" = "keep" ]; then set vt_handoff=vt.handoff=7 else set vt_handoff= fi } if [ ${recordfail} != 1 ]; then if [ -e ${prefix}/gfxblacklist.txt ]; then if hwmatch ${prefix}/gfxblacklist.txt 3; then if [ ${match} = 0 ]; then set linux_gfx_mode=keep else set linux_gfx_mode=text fi else set linux_gfx_mode=text fi else set linux_gfx_mode=keep fi else set linux_gfx_mode=text fi export linux_gfx_mode if [ "$linux_gfx_mode" != "text" ]; then load_video; fi menuentry 'Ubuntu, with Linux 3.2.0-20-generic' --class ubuntu --class gnu-linux --class gnu --class os { recordfail gfxmode $linux_gfx_mode insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro quiet splash $vt_handoff initrd /boot/initrd.img-3.2.0-20-generic } menuentry 'Ubuntu, with Linux 3.2.0-20-generic (recovery mode)' --class ubuntu --class gnu-linux --class gnu --class os { recordfail insmod gzio insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 echo 'Loading Linux 3.2.0-20-generic ...' linux /boot/vmlinuz-3.2.0-20-generic root=UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 ro recovery nomodeset echo 'Loading initial ramdisk ...' initrd /boot/initrd.img-3.2.0-20-generic } ### END /etc/grub.d/10_linux ### ### BEGIN /etc/grub.d/20_linux_xen ### ### END /etc/grub.d/20_linux_xen ### ### BEGIN /etc/grub.d/20_memtest86+ ### menuentry "Memory test (memtest86+)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin } menuentry "Memory test (memtest86+, serial console 115200)" { insmod part_gpt insmod ext2 set root='(hd0,gpt4)' search --no-floppy --fs-uuid --set=root 604dd3b2-64ca-4200-b8fb-820e8d0ca899 linux16 /boot/memtest86+.bin console=ttyS0,115200n8 } ### END /etc/grub.d/20_memtest86+ ### ### BEGIN /etc/grub.d/30_os-prober ### ### END /etc/grub.d/30_os-prober ### ### BEGIN /etc/grub.d/40_custom ### # This file provides an easy way to add custom menu entries. Simply type the # menu entries you want to add after this comment. Be careful not to change # the 'exec tail' line above. ### END /etc/grub.d/40_custom ### ### BEGIN /etc/grub.d/41_custom ### if [ -f $prefix/custom.cfg ]; then source $prefix/custom.cfg; fi ### END /etc/grub.d/41_custom ### -------------------------------------------------------------------------------- =============================== sda4/etc/fstab: ================================ -------------------------------------------------------------------------------- # /etc/fstab: static file system information. # # Use 'blkid' to print the universally unique identifier for a # device; this may be used with UUID= as a more robust way to name devices # that works even if disks are added and removed. See fstab(5). # # <file system> <mount point> <type> <options> <dump> <pass> proc /proc proc nodev,noexec,nosuid 0 0 # / was on /dev/sda4 during installation UUID=604dd3b2-64ca-4200-b8fb-820e8d0ca899 / ext4 errors=remount-ro 0 1 # /boot/efi was on /dev/sda1 during installation UUID=885C-ED1B /boot/efi vfat defaults 0 1 # /home was on /dev/sda5 during installation UUID=d62515fd-8120-4a74-b17b-0bdf244124a3 /home ext4 defaults 0 2 # swap was on /dev/sda6 during installation UUID=7078b649-fb2a-4c59-bd03-fd31ef440d37 none swap sw 0 0 -------------------------------------------------------------------------------- =================== sda4: Location of files loaded by Grub: ==================== GiB - GB File Fragment(s) 129.422874451 = 138.966753280 boot/grub/grub.cfg 1 83.059570312 = 89.184534528 boot/initrd.img-3.2.0-20-generic 2 101.393131256 = 108.870045696 boot/vmlinuz-3.2.0-20-generic 1 83.059570312 = 89.184534528 initrd.img 2 101.393131256 = 108.870045696 vmlinuz 1 ADDITIONAL INFORMATION : =================== log of boot-repair 2012-04-25__23h40 =================== boot-repair version : 3.18-0ppa3~precise boot-sav version : 3.18-0ppa4~precise glade2script version : 0.3.2.1-0ppa7~precise internet: connected python-software-properties version : 0.82.7 0 upgraded, 0 newly installed, 1 reinstalled, 0 to remove and 591 not upgraded. dpkg-preconfigure: unable to re-open stdin: No such file or directory boot-repair is executed in installed-session (Ubuntu precise (development branch) , precise , Ubuntu , x86_64) WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== OSPROBER: /dev/sda4:The OS now in use - Ubuntu precise (development branch) CurrentSession:linux =================== BLKID: /dev/sda3: UUID="EE06CC0506CBCCB1" TYPE="ntfs" /dev/sda1: UUID="885C-ED1B" TYPE="vfat" /dev/sda4: UUID="604dd3b2-64ca-4200-b8fb-820e8d0ca899" TYPE="ext4" /dev/sda5: UUID="d62515fd-8120-4a74-b17b-0bdf244124a3" TYPE="ext4" /dev/sda6: UUID="7078b649-fb2a-4c59-bd03-fd31ef440d37" TYPE="swap" 1 disks with OS, 1 OS : 1 Linux, 0 MacOS, 0 Windows, 0 unknown type OS. WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util sfdisk doesn't support GPT. Use GNU Parted. =================== /etc/default/grub : # If you change this file, run 'update-grub' afterwards to update # /boot/grub/grub.cfg. # For full documentation of the options in this file, see: # info -f grub -n 'Simple configuration' GRUB_DEFAULT=0 #GRUB_HIDDEN_TIMEOUT=0 #GRUB_HIDDEN_TIMEOUT_QUIET=true GRUB_TIMEOUT=10 GRUB_DISTRIBUTOR=`lsb_release -i -s 2> /dev/null || echo Debian` GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" GRUB_CMDLINE_LINUX="" # Uncomment to enable BadRAM filtering, modify to suit your needs # This works with Linux (no patch required) and with any kernel that obtains # the memory map information from GRUB (GNU Mach, kernel of FreeBSD ...) #GRUB_BADRAM="0x01234567,0xfefefefe,0x89abcdef,0xefefefef" # Uncomment to disable graphical terminal (grub-pc only) #GRUB_TERMINAL=console # The resolution used on graphical terminal # note that you can use only modes which your graphic card supports via VBE # you can see them in real GRUB with the command `vbeinfo' #GRUB_GFXMODE=640x480 # Uncomment if you don't want GRUB to pass "root=UUID=xxx" parameter to Linux #GRUB_DISABLE_LINUX_UUID=true # Uncomment to disable generation of recovery mode menu entries #GRUB_DISABLE_RECOVERY="true" # Uncomment to get a beep at grub start #GRUB_INIT_TUNE="480 440 1" EFI_OF_PART[1] (, ) =================== dmesg | grep EFI : [ 0.000000] EFI v2.00 by Lenovo [ 0.000000] Kernel-defined memdesc doesn't match the one from EFI! [ 0.000000] EFI: mem00: type=3, attr=0xf, range=[0x0000000000000000-0x0000000000001000) (0MB) [ 0.000000] EFI: mem01: type=7, attr=0xf, range=[0x0000000000001000-0x000000000004e000) (0MB) [ 0.000000] EFI: mem02: type=3, attr=0xf, range=[0x000000000004e000-0x0000000000058000) (0MB) [ 0.000000] EFI: mem03: type=10, attr=0xf, range=[0x0000000000058000-0x0000000000059000) (0MB) [ 0.000000] EFI: mem04: type=7, attr=0xf, range=[0x0000000000059000-0x000000000005e000) (0MB) [ 0.000000] EFI: mem05: type=4, attr=0xf, range=[0x000000000005e000-0x000000000005f000) (0MB) [ 0.000000] EFI: mem06: type=3, attr=0xf, range=[0x000000000005f000-0x00000000000a0000) (0MB) [ 0.000000] EFI: mem07: type=2, attr=0xf, range=[0x0000000000100000-0x00000000005b9000) (4MB) [ 0.000000] EFI: mem08: type=7, attr=0xf, range=[0x00000000005b9000-0x0000000020000000) (506MB) [ 0.000000] EFI: mem09: type=0, attr=0xf, range=[0x0000000020000000-0x0000000020200000) (2MB) [ 0.000000] EFI: mem10: type=7, attr=0xf, range=[0x0000000020200000-0x00000000364e4000) (354MB) [ 0.000000] EFI: mem11: type=2, attr=0xf, range=[0x00000000364e4000-0x000000003726a000) (13MB) [ 0.000000] EFI: mem12: type=7, attr=0xf, range=[0x000000003726a000-0x0000000040000000) (141MB) [ 0.000000] EFI: mem13: type=0, attr=0xf, range=[0x0000000040000000-0x0000000040200000) (2MB) [ 0.000000] EFI: mem14: type=7, attr=0xf, range=[0x0000000040200000-0x000000009df35000) (1501MB) [ 0.000000] EFI: mem15: type=2, attr=0xf, range=[0x000000009df35000-0x00000000d39a0000) (858MB) [ 0.000000] EFI: mem16: type=4, attr=0xf, range=[0x00000000d39a0000-0x00000000d39c0000) (0MB) [ 0.000000] EFI: mem17: type=7, attr=0xf, range=[0x00000000d39c0000-0x00000000d5df5000) (36MB) [ 0.000000] EFI: mem18: type=4, attr=0xf, range=[0x00000000d5df5000-0x00000000d6990000) (11MB) [ 0.000000] EFI: mem19: type=7, attr=0xf, range=[0x00000000d6990000-0x00000000d6b82000) (1MB) [ 0.000000] EFI: mem20: type=1, attr=0xf, range=[0x00000000d6b82000-0x00000000d6b9f000) (0MB) [ 0.000000] EFI: mem21: type=7, attr=0xf, range=[0x00000000d6b9f000-0x00000000d77b0000) (12MB) [ 0.000000] EFI: mem22: type=4, attr=0xf, range=[0x00000000d77b0000-0x00000000d780a000) (0MB) [ 0.000000] EFI: mem23: type=7, attr=0xf, range=[0x00000000d780a000-0x00000000d7826000) (0MB) [ 0.000000] EFI: mem24: type=4, attr=0xf, range=[0x00000000d7826000-0x00000000d7868000) (0MB) [ 0.000000] EFI: mem25: type=7, attr=0xf, range=[0x00000000d7868000-0x00000000d7869000) (0MB) [ 0.000000] EFI: mem26: type=4, attr=0xf, range=[0x00000000d7869000-0x00000000d786a000) (0MB) [ 0.000000] EFI: mem27: type=7, attr=0xf, range=[0x00000000d786a000-0x00000000d786b000) (0MB) [ 0.000000] EFI: mem28: type=4, attr=0xf, range=[0x00000000d786b000-0x00000000d786c000) (0MB) [ 0.000000] EFI: mem29: type=7, attr=0xf, range=[0x00000000d786c000-0x00000000d786d000) (0MB) [ 0.000000] EFI: mem30: type=4, attr=0xf, range=[0x00000000d786d000-0x00000000d825f000) (9MB) [ 0.000000] EFI: mem31: type=7, attr=0xf, range=[0x00000000d825f000-0x00000000d8261000) (0MB) [ 0.000000] EFI: mem32: type=4, attr=0xf, range=[0x00000000d8261000-0x00000000d82f7000) (0MB) [ 0.000000] EFI: mem33: type=7, attr=0xf, range=[0x00000000d82f7000-0x00000000d82f8000) (0MB) [ 0.000000] EFI: mem34: type=4, attr=0xf, range=[0x00000000d82f8000-0x00000000d8705000) (4MB) [ 0.000000] EFI: mem35: type=7, attr=0xf, range=[0x00000000d8705000-0x00000000d8706000) (0MB) [ 0.000000] EFI: mem36: type=4, attr=0xf, range=[0x00000000d8706000-0x00000000d8761000) (0MB) [ 0.000000] EFI: mem37: type=7, attr=0xf, range=[0x00000000d8761000-0x00000000d8768000) (0MB) [ 0.000000] EFI: mem38: type=4, attr=0xf, range=[0x00000000d8768000-0x00000000d9b9f000) (20MB) [ 0.000000] EFI: mem39: type=7, attr=0xf, range=[0x00000000d9b9f000-0x00000000d9e4c000) (2MB) [ 0.000000] EFI: mem40: type=2, attr=0xf, range=[0x00000000d9e4c000-0x00000000d9e52000) (0MB) [ 0.000000] EFI: mem41: type=3, attr=0xf, range=[0x00000000d9e52000-0x00000000da59f000) (7MB) [ 0.000000] EFI: mem42: type=5, attr=0x800000000000000f, range=[0x00000000da59f000-0x00000000da6c3000) (1MB) [ 0.000000] EFI: mem43: type=5, attr=0x800000000000000f, range=[0x00000000da6c3000-0x00000000da79f000) (0MB) [ 0.000000] EFI: mem44: type=6, attr=0x800000000000000f, range=[0x00000000da79f000-0x00000000da8b1000) (1MB) [ 0.000000] EFI: mem45: type=6, attr=0x800000000000000f, range=[0x00000000da8b1000-0x00000000da99f000) (0MB) [ 0.000000] EFI: mem46: type=0, attr=0xf, range=[0x00000000da99f000-0x00000000daa22000) (0MB) [ 0.000000] EFI: mem47: type=0, attr=0xf, range=[0x00000000daa22000-0x00000000daa9b000) (0MB) [ 0.000000] EFI: mem48: type=0, attr=0xf, range=[0x00000000daa9b000-0x00000000daa9c000) (0MB) [ 0.000000] EFI: mem49: type=0, attr=0xf, range=[0x00000000daa9c000-0x00000000daa9f000) (0MB) [ 0.000000] EFI: mem50: type=10, attr=0xf, range=[0x00000000daa9f000-0x00000000daadd000) (0MB) [ 0.000000] EFI: mem51: type=10, attr=0xf, range=[0x00000000daadd000-0x00000000dab9f000) (0MB) [ 0.000000] EFI: mem52: type=9, attr=0xf, range=[0x00000000dab9f000-0x00000000dabdc000) (0MB) [ 0.000000] EFI: mem53: type=9, attr=0xf, range=[0x00000000dabdc000-0x00000000dabff000) (0MB) [ 0.000000] EFI: mem54: type=4, attr=0xf, range=[0x00000000dabff000-0x00000000dac00000) (0MB) [ 0.000000] EFI: mem55: type=7, attr=0xf, range=[0x0000000100000000-0x000000021e600000) (4582MB) [ 0.000000] EFI: mem56: type=11, attr=0x8000000000000001, range=[0x00000000f80f8000-0x00000000f80f9000) (0MB) [ 0.000000] EFI: mem57: type=11, attr=0x8000000000000001, range=[0x00000000fed1c000-0x00000000fed20000) (0MB) [ 0.000000] ACPI: UEFI 00000000dabde000 0003E (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.000000] ACPI: UEFI 00000000dabdd000 00042 (v01 PTL COMBUF 00000001 PTL 00000001) [ 0.000000] ACPI: UEFI 00000000dabdc000 00292 (v01 LENOVO TP-8D 00001280 PTL 00000002) [ 0.795807] fb0: EFI VGA frame buffer device [ 1.057243] EFI Variables Facility v0.08 2004-May-17 [ 9.122104] fb: conflicting fb hw usage inteldrmfb vs EFI VGA - removing generic driver ReadEFI: /dev/sda , N 128 , 0 , , PRStart 1024 , PRSize 128 WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== PARTITIONS & DISKS: sda4 : sda, not-sepboot, grubenv-ok grub2, grub-efi, update-grub, 64, with-boot, is-os, gpt-but-not-EFI, fstab-has-bad-efi, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, apt-get, grub-install, . sda3 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, haswinload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /mnt/boot-sav/sda3. sda1 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, is-correct-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /boot/efi. sda5 : sda, maybesepboot, no-grubenv nogrub, no-docgrub, no-update-grub, 32, no-boot, no-os, gpt-but-not-EFI, part-has-no-fstab, no-nt, no-winload, no-recov-nor-hid, no-bmgr, no-grldr, no-b-bcd, nopakmgr, nogrubinstall, /home. sda : GPT-BIS, GPT, no-BIOS_boot, has-correctEFI, 2048 sectors * 512 bytes =================== PARTED: Model: ATA HITACHI HTS72323 (scsi) Disk /dev/sda: 320GB Sector size (logical/physical): 512B/512B Partition Table: gpt Number Start End Size File system Name Flags 1 1049kB 106MB 105MB fat32 EFI system partition boot 2 106MB 240MB 134MB Microsoft reserved partition msftres 3 240MB 87.2GB 87.0GB ntfs Basic data partition 4 87.2GB 169GB 81.9GB ext4 5 169GB 316GB 147GB ext4 6 316GB 320GB 4096MB linux-swap(v1) =================== MOUNT: /dev/sda4 on / type ext4 (rw,errors=remount-ro) proc on /proc type proc (rw,noexec,nosuid,nodev) sysfs on /sys type sysfs (rw,noexec,nosuid,nodev) none on /sys/fs/fuse/connections type fusectl (rw) none on /sys/kernel/debug type debugfs (rw) none on /sys/kernel/security type securityfs (rw) udev on /dev type devtmpfs (rw,mode=0755) devpts on /dev/pts type devpts (rw,noexec,nosuid,gid=5,mode=0620) tmpfs on /run type tmpfs (rw,noexec,nosuid,size=10%,mode=0755) none on /run/lock type tmpfs (rw,noexec,nosuid,nodev,size=5242880) none on /run/shm type tmpfs (rw,nosuid,nodev) /dev/sda1 on /boot/efi type vfat (rw) /dev/sda5 on /home type ext4 (rw) gvfs-fuse-daemon on /home/vierlex/.gvfs type fuse.gvfs-fuse-daemon (rw,nosuid,nodev,user=vierlex) /dev/sda3 on /mnt/boot-sav/sda3 type fuseblk (rw,nosuid,nodev,allow_other,blksize=4096) /sys/block/sda: alignment_offset bdi capability dev device discard_alignment events events_async events_poll_msecs ext_range holders inflight power queue range removable ro sda1 sda2 sda3 sda4 sda5 sda6 size slaves stat subsystem trace uevent /dev: agpgart autofs block bsg btrfs-control bus char console core cpu cpu_dma_latency disk dri ecryptfs fb0 fd full fuse hpet input kmsg log mapper mcelog mei mem net network_latency network_throughput null oldmem port ppp psaux ptmx pts random rfkill rtc rtc0 sda sda1 sda2 sda3 sda4 sda5 sda6 sg0 shm snapshot snd stderr stdin stdout tpm0 uinput urandom usbmon0 usbmon1 usbmon2 v4l vga_arbiter video0 watchdog zero /dev/mapper: control /boot/efi: EFI /boot/efi/EFI: Boot Microsoft ubuntu /boot/efi/efi: Boot Microsoft ubuntu /boot/efi/efi/Boot: bootx64.efi /boot/efi/efi/ubuntu: grubx64.efi WARNING: GPT (GUID Partition Table) detected on '/dev/sda'! The util fdisk doesn't support GPT. Use GNU Parted. =================== DF: Filesystem Type Size Used Avail Use% Mounted on /dev/sda4 ext4 77G 4.1G 69G 6% / udev devtmpfs 3.9G 12K 3.9G 1% /dev tmpfs tmpfs 1.6G 864K 1.6G 1% /run none tmpfs 5.0M 0 5.0M 0% /run/lock none tmpfs 3.9G 152K 3.9G 1% /run/shm /dev/sda1 vfat 96M 18M 79M 19% /boot/efi /dev/sda5 ext4 137G 2.2G 128G 2% /home /dev/sda3 fuseblk 81G 30G 52G 37% /mnt/boot-sav/sda3 =================== FDISK: Disk /dev/sda: 320.1 GB, 320072933376 bytes 255 heads, 63 sectors/track, 38913 cylinders, total 625142448 sectors Units = sectors of 1 * 512 = 512 bytes Sector size (logical/physical): 512 bytes / 512 bytes I/O size (minimum/optimal): 512 bytes / 512 bytes Disk identifier: 0xf34fe538 Device Boot Start End Blocks Id System /dev/sda1 1 625142447 312571223+ ee GPT =================== Before mainwindow FSCK no PASTEBIN yes WUBI no WINBOOT yes recommendedrepair, purge, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION yes (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) EFI detected. Please check the options. =================== Actions FSCK no PASTEBIN yes WUBI no WINBOOT no bootinfo, nombraction, QTY_OF_PART_FOR_REINSTAL 1 no-kernel-purge UNHIDEBOOT_ACTION no (10s), noflag () PART_TO_REINSTALL_GRUB sda4, FORCE_GRUB no (sda) REMOVABLEDISK no USE_SEPARATEBOOTPART no (sda3) grub2 () UNCOMMENT_GFXMODE no ATA ADD_KERNEL_OPTION no (acpi=off) MBR_TO_RESTORE ( ) No change has been performed on your computer. See you soon! internet: connected Thanks for your time and attention. EDIT: additional Info Request =No boot loader is installed in the MBR of /dev/sda. But maybe this is how it is supposed to work? yea this is ok. boot stuff seems to be on a seperate partition, in my case sda1. I'm very new to this UEFI thing too. missing files like bootmgr i don't really have a clue :D but yea, maybe thats how it suppose to be? Instead and whats not shown in the log for some reason: There is additional microsoft bootfiles on sda1 under /efi/microsoft/ [much stuff] I remember also doing some kind of hack to make a UEFI windows 7 usb stick. http://jake.io/b/2011/installing-windows-7-with-uefi-boot-on-an-x220-from-usb/ In short: creating and placing bootx64.efi on the stick so it can be booted in UEFI mode. boot order i decide that in my BIOS. i read somwhere that the thinkpad x220 (essential part of the serial number: 4921 http://www.lenovo.com/shop/americas/content/user_guides/x220_x220i_x220tablet_x220itablet_ug_en.pdf) doesnt really have UEFI interface or something, still, these 2 options are listed with all the other usual devices you can give a boot priority to. Right now it looks like this: Boot Priority Order 1. ubuntu 2. Windows Boot Manager 3. USB FDD 4. USB HDD 5. ATA HDD0 HITACHI [random string]

    Read the article

  • JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes

    - by John-Brown.Evans
    JMS Step 6 - How to Set Up an AQ JMS (Advanced Queueing JMS) for SOA Purposes .jblist{list-style-type:disc;margin:0;padding:0;padding-left:0pt;margin-left:36pt} ol{margin:0;padding:0} .c17_6{vertical-align:top;width:468pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c5_6{vertical-align:top;border-style:solid;border-color:#000000;border-width:1pt;padding:0pt 5pt 0pt 5pt} .c6_6{vertical-align:top;width:156pt;border-style:solid;border-color:#000000;border-width:1pt;padding:5pt 5pt 5pt 5pt} .c15_6{background-color:#ffffff} .c10_6{color:#1155cc;text-decoration:underline} .c1_6{text-align:center;direction:ltr} .c0_6{line-height:1.0;direction:ltr} .c16_6{color:#666666;font-size:12pt} .c18_6{color:inherit;text-decoration:inherit} .c8_6{background-color:#f3f3f3} .c2_6{direction:ltr} .c14_6{font-size:8pt} .c11_6{font-size:10pt} .c7_6{font-weight:bold} .c12_6{height:0pt} .c3_6{height:11pt} .c13_6{border-collapse:collapse} .c4_6{font-family:"Courier New"} .c9_6{font-style:italic} .title{padding-top:24pt;line-height:1.15;text-align:left;color:#000000;font-size:36pt;font-family:"Arial";font-weight:bold;padding-bottom:6pt} .subtitle{padding-top:18pt;line-height:1.15;text-align:left;color:#666666;font-style:italic;font-size:24pt;font-family:"Georgia";padding-bottom:4pt} li{color:#000000;font-size:10pt;font-family:"Arial"} p{color:#000000;font-size:10pt;margin:0;font-family:"Arial"} h1{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:24pt;font-family:"Arial";font-weight:normal} h2{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:18pt;font-family:"Arial";font-weight:normal} h3{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:14pt;font-family:"Arial";font-weight:normal} h4{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:12pt;font-family:"Arial";font-weight:normal} h5{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:11pt;font-family:"Arial";font-weight:normal} h6{padding-top:0pt;line-height:1.15;text-align:left;color:#888;font-size:10pt;font-family:"Arial";font-weight:normal} This post continues the series of JMS articles which demonstrate how to use JMS queues in a SOA context. The previous posts were: JMS Step 1 - How to Create a Simple JMS Queue in Weblogic Server 11g JMS Step 2 - Using the QueueSend.java Sample Program to Send a Message to a JMS Queue JMS Step 3 - Using the QueueReceive.java Sample Program to Read a Message from a JMS Queue JMS Step 4 - How to Create an 11g BPEL Process Which Writes a Message Based on an XML Schema to a JMS Queue JMS Step 5 - How to Create an 11g BPEL Process Which Reads a Message Based on an XML Schema from a JMS Queue This example leads you through the creation of an Oracle database Advanced Queue and the related WebLogic server objects in order to use AQ JMS in connection with a SOA composite. If you have not already done so, I recommend you look at the previous posts in this series, as they include steps which this example builds upon. The following examples will demonstrate how to write and read from the queue from a SOA process. 1. Recap and Prerequisites In the previous examples, we created a JMS Queue, a Connection Factory and a Connection Pool in the WebLogic Server Console. Then we wrote and deployed BPEL composites, which enqueued and dequeued a simple XML payload. AQ JMS allows you to interoperate with database Advanced Queueing via JMS in WebLogic server and therefore take advantage of database features, while maintaining compliance with the JMS architecture. AQ JMS uses the WebLogic JMS Foreign Server framework. A full description of this functionality can be found in the following Oracle documentation Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server 11g Release 1 (10.3.6) Part Number E13738-06 7. Interoperating with Oracle AQ JMS http://docs.oracle.com/cd/E23943_01/web.1111/e13738/aq_jms.htm#CJACBCEJ For easier reference, this sample will use the same names for the objects as in the above document, except for the name of the database user, as it is possible that this user already exists in your database. We will create the following objects Database Objects Name Type AQJMSUSER Database User MyQueueTable Advanced Queue (AQ) Table UserQueue Advanced Queue WebLogic Server Objects Object Name Type JNDI Name aqjmsuserDataSource Data Source jdbc/aqjmsuserDataSource AqJmsModule JMS System Module AqJmsForeignServer JMS Foreign Server AqJmsForeignServerConnectionFactory JMS Foreign Server Connection Factory AqJmsForeignServerConnectionFactory AqJmsForeignDestination AQ JMS Foreign Destination queue/USERQUEUE eis/aqjms/UserQueue Connection Pool eis/aqjms/UserQueue 2. Create a Database User and Advanced Queue The following steps can be executed in the database client of your choice, e.g. JDeveloper or SQL Developer. The examples below use SQL*Plus. Log in to the database as a DBA user, for example SYSTEM or SYS. Create the AQJMSUSER user and grant privileges to enable the user to create AQ objects. Create Database User and Grant AQ Privileges sqlplus system/password as SYSDBA GRANT connect, resource TO aqjmsuser IDENTIFIED BY aqjmsuser; GRANT aq_user_role TO aqjmsuser; GRANT execute ON sys.dbms_aqadm TO aqjmsuser; GRANT execute ON sys.dbms_aq TO aqjmsuser; GRANT execute ON sys.dbms_aqin TO aqjmsuser; GRANT execute ON sys.dbms_aqjms TO aqjmsuser; Create the Queue Table and Advanced Queue and Start the AQ The following commands are executed as the aqjmsuser database user. Create the Queue Table connect aqjmsuser/aqjmsuser; BEGIN dbms_aqadm.create_queue_table ( queue_table = 'myQueueTable', queue_payload_type = 'sys.aq$_jms_text_message', multiple_consumers = false ); END; / Create the AQ BEGIN dbms_aqadm.create_queue ( queue_name = 'userQueue', queue_table = 'myQueueTable' ); END; / Start the AQ BEGIN dbms_aqadm.start_queue ( queue_name = 'userQueue'); END; / The above commands can be executed in a single PL/SQL block, but are shown as separate blocks in this example for ease of reference. You can verify the queue by executing the SQL command SELECT object_name, object_type FROM user_objects; which should display the following objects: OBJECT_NAME OBJECT_TYPE ------------------------------ ------------------- SYS_C0056513 INDEX SYS_LOB0000170822C00041$$ LOB SYS_LOB0000170822C00040$$ LOB SYS_LOB0000170822C00037$$ LOB AQ$_MYQUEUETABLE_T INDEX AQ$_MYQUEUETABLE_I INDEX AQ$_MYQUEUETABLE_E QUEUE AQ$_MYQUEUETABLE_F VIEW AQ$MYQUEUETABLE VIEW MYQUEUETABLE TABLE USERQUEUE QUEUE Similarly, you can view the objects in JDeveloper via a Database Connection to the AQJMSUSER. 3. Configure WebLogic Server and Add JMS Objects All these steps are executed from the WebLogic Server Administration Console. Log in as the webLogic user. Configure a WebLogic Data Source The data source is required for the database connection to the AQ created above. Navigate to domain > Services > Data Sources and press New then Generic Data Source. Use the values:Name: aqjmsuserDataSource JNDI Name: jdbc/aqjmsuserDataSource Database type: Oracle Database Driver: *Oracle’ Driver (Thin XA) for Instance connections; Versions:9.0.1 and later Connection Properties: Enter the connection information to the database containing the AQ created above and enter aqjmsuser for the User Name and Password. Press Test Configuration to verify the connection details and press Next. Target the data source to the soa server. The data source will be displayed in the list. It is a good idea to test the data source at this stage. Click on aqjmsuserDataSource, select Monitoring > Testing > soa_server1 and press Test Data Source. The result is displayed at the top of the page. Configure a JMS System Module The JMS system module is required to host the JMS foreign server for AQ resources. Navigate to Services > Messaging > JMS Modules and select New. Use the values: Name: AqJmsModule (Leave Descriptor File Name and Location in Domain empty.) Target: soa_server1 Click Finish. The other resources will be created in separate steps. The module will be displayed in the list.   Configure a JMS Foreign Server A foreign server is required in order to reference a 3rd-party JMS provider, in this case the database AQ, within a local WebLogic server JNDI tree. Navigate to Services > Messaging > JMS Modules and select (click on) AqJmsModule to configure it. Under Summary of Resources, select New then Foreign Server. Name: AqJmsForeignServer Targets: The foreign server is targeted automatically to soa_server1, based on the JMS module’s target. Press Finish to create the foreign server. The foreign server resource will be listed in the Summary of Resources for the AqJmsModule, but needs additional configuration steps. Click on AqJmsForeignServer and select Configuration > General to complete the configuration: JNDI Initial Context Factory: oracle.jms.AQjmsInitialContextFactory JNDI Connection URL: <empty> JNDI Properties Credential:<empty> Confirm JNDI Properties Credential: <empty> JNDI Properties: datasource=jdbc/aqjmsuserDataSource This is an important property. It is the JNDI name of the data source created above, which points to the AQ schema in the database and must be entered as a name=value pair, as in this example, e.g. datasource=jdbc/aqjmsuserDataSource, including the “datasource=” property name. Default Targeting Enabled: Leave this value checked. Press Save to save the configuration. At this point it is a good idea to verify that the data source was written correctly to the config file. In a terminal window, navigate to $MIDDLEWARE_HOME/user_projects/domains/soa_domain/config/jms  and open the file aqjmsmodule-jms.xml . The foreign server configuration should contain the datasource name-value pair, as follows:   <foreign-server name="AqJmsForeignServer">         <default-targeting-enabled>true</default-targeting-enabled>         <initial-context-factory>oracle.jms.AQjmsInitialContextFactory</initial-context-factory>         <jndi-property>           <key> datasource </key>           <value> jdbc/aqjmsuserDataSource </value>         </jndi-property>   </foreign-server> </weblogic-jms> Configure a JMS Foreign Server Connection Factory When creating the foreign server connection factory, you enter local and remote JNDI names. The name of the connection factory itself and the local JNDI name are arbitrary, but the remote JNDI name must match a specific format, depending on the type of queue or topic to be accessed in the database. This is very important and if the incorrect value is used, the connection to the queue will not be established and the error messages you get will not immediately reflect the cause of the error. The formats required (Remote JNDI names for AQ JMS Connection Factories) are described in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In this example, the remote JNDI name used is   XAQueueConnectionFactory  because it matches the AQ and data source created earlier, i.e. thin with AQ. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories then New.Name: AqJmsForeignServerConnectionFactory Local JNDI Name: AqJmsForeignServerConnectionFactory Note: this local JNDI name is the JNDI name which your client application, e.g. a later BPEL process, will use to access this connection factory. Remote JNDI Name: XAQueueConnectionFactory Press OK to save the configuration. Configure an AQ JMS Foreign Server Destination A foreign server destination maps the JNDI name on the foreign JNDI provider to the respective local JNDI name, allowing the foreign JNDI name to be accessed via the local server. As with the foreign server connection factory, the local JNDI name is arbitrary (but must be unique), but the remote JNDI name must conform to a specific format defined in the section Configure AQ Destinations  of the Oracle® Fusion Middleware Configuring and Managing JMS for Oracle WebLogic Server document mentioned earlier. In our example, the remote JNDI name is Queues/USERQUEUE , because it references a queue (as opposed to a topic) with the name USERQUEUE. We will name the local JNDI name queue/USERQUEUE, which is a little confusing (note the missing “s” in “queue), but conforms better to the JNDI nomenclature in our SOA server and also allows us to differentiate between the local and remote names for demonstration purposes. Navigate to JMS Modules > AqJmsModule > AqJmsForeignServer > Destinations and select New.Name: AqJmsForeignDestination Local JNDI Name: queue/USERQUEUE Remote JNDI Name:Queues/USERQUEUE After saving the foreign destination configuration, this completes the JMS part of the configuration. We still need to configure the JMS adapter in order to be able to access the queue from a BPEL processt. 4. Create a JMS Adapter Connection Pool in Weblogic Server Create the Connection Pool Access to the AQ JMS queue from a BPEL or other SOA process in our example is done via a JMS adapter. To enable this, the JmsAdapter in WebLogic server needs to be configured to have a connection pool which points to the local connection factory JNDI name which was created earlier. Navigate to Deployments > Next and select (click on) the JmsAdapter. Select Configuration > Outbound Connection Pools and New. Check the radio button for oracle.tip.adapter.jms.IJmsConnectionFactory and press Next. JNDI Name: eis/aqjms/UserQueue Press Finish Expand oracle.tip.adapter.jms.IJmsConnectionFactory and click on eis/aqjms/UserQueue to configure it. The ConnectionFactoryLocation must point to the foreign server’s local connection factory name created earlier. In our example, this is AqJmsForeignServerConnectionFactory . As a reminder, this connection factory is located under JMS Modules > AqJmsModule > AqJmsForeignServer > Connection Factories and the value needed here is under Local JNDI Name. Enter AqJmsForeignServerConnectionFactory  into the Property Value field for ConnectionFactoryLocation. You must then press Return/Enter then Save for the value to be accepted. If your WebLogic server is running in Development mode, you should see the message that the changes have been activated and the deployment plan successfully updated. If not, then you will manually need to activate the changes in the WebLogic server console.Although the changes have been activated, the JmsAdapter needs to be redeployed in order for the changes to become effective. This should be confirmed by the message Remember to update your deployment to reflect the new plan when you are finished with your changes. Redeploy the JmsAdapter Navigate back to the Deployments screen, either by selecting it in the left-hand navigation tree or by selecting the “Summary of Deployments” link in the breadcrumbs list at the top of the screen. Then select the checkbox next to JmsAdapter and press the Update button. On the Update Application Assistant page, select “Redeploy this application using the following deployment files” and press Finish. After a few seconds you should get the message that the selected deployments were updated. The JMS adapter configuration is complete and it can now be used to access the AQ JMS queue. You can verify that the JNDI name was created correctly, by navigating to Environment > Servers > soa_server1 and View JNDI Tree. Then scroll down in the JNDI Tree Structure to eis and select aqjms. This concludes the sample. In the following post, I will show you how to create a BPEL process which sends a message to this advanced queue via JMS. Best regards John-Brown Evans Oracle Technology Proactive Support Delivery

    Read the article

  • CodePlex Daily Summary for Thursday, November 18, 2010

    CodePlex Daily Summary for Thursday, November 18, 2010Popular ReleasesSitefinity Migration Tool: Sitefinity Migration Tool 0.2 Alpha: - Improvements for the Sitefinity RC releaseMiniTwitter: 1.57: MiniTwitter 1.57 ???? ?? ?????????????????? ?? User Streams ????????????????????? ???????????????·??????·???????VFPX: VFP2C32 2.0.0.7: fixed a bug in AAverage - NULL values in the array corrupted the result removed limitation in ASum, AMin, AMax, AAverage - the functions were limited to 65000 elements, now they're limited to 65000 rows ASplitStr now returns a 1 element array with an empty string when an empty string is passed (behaves more like ALINES) internal code cleanup and optimization: optimized FoxArray class - results in a speedup of 10-20% in many functions which return the result in an array - like AProcesses...Microsoft SQL Server Product Samples: Database: AdventureWorks 2008R2 SR1: Sample Databases for Microsoft SQL Server 2008R2 (SR1)This release is dedicated to the sample databases that ship for Microsoft SQL Server 2008R2. See Database Prerequisites for SQL Server 2008R2 for feature configurations required for installing the sample databases. See Installing SQL Server 2008R2 Databases for step by step installation instructions. The SR1 release contains minor bug fixes to the installer used to create the sample databases. There are no changes to the databases them...VidCoder: 0.7.2: Fixed duplicated subtitles when running multiple encodes off of the same title.Razor Templating Engine: Razor Template Engine v1.1: Release 1.1 Changes: ADDED: Signed assemblies with strong name to allow assemblies to be referenced by other strongly-named assemblies. FIX: Filter out dynamic assemblies which causes failures in template compilation. FIX: Changed ASCII to UTF8 encoding to support UTF-8 encoded string templates. FIX: Corrected implementation of TemplateBase adding ITemplate interface.Prism Training Kit: Prism Training Kit - 1.1: This is an updated version of the Prism training Kit that targets Prism 4.0 and fixes the bugs reported in the version 1.0. This release consists of a Training Kit with Labs on the following topics Modularity Dependency Injection Bootstrapper UI Composition Communication Note: Take into account that this is a Beta version. If you find any bugs please report them in the Issue Tracker PrerequisitesVisual Studio 2010 Microsoft Word 2007/2010 Microsoft Silverlight 4 Microsoft S...Craig's Utility Library: Craig's Utility Library Code 2.0: This update contains a number of changes, added functionality, and bug fixes: Added transaction support to SQLHelper. Added linked/embedded resource ability to EmailSender. Updated List to take into account new functions. Added better support for MAC address in WMI classes. Fixed Parsing in Reflection class when dealing with sub classes. Fixed bug in SQLHelper when replacing the Command that is a select after doing a select. Fixed issue in SQL Server helper with regard to generati...MFCMAPI: November 2010 Release: Build: 6.0.0.1023 Full release notes at SGriffin's blog. If you just want to run the tool, get the executable. If you want to debug it, get the symbol file and the source. The 64 bit build will only work on a machine with Outlook 2010 64 bit installed. All other machines should use the 32 bit build, regardless of the operating system. Facebook BadgeDotNetNuke® Community Edition: 05.06.00: Major HighlightsAdded automatic portal alias creation for single portal installs Updated the file manager upload page to allow user to upload multiple files without returning to the file manager page. Fixed issue with Event Log Email Notifications. Fixed issue where Telerik HTML Editor was unable to upload files to secure or database folder. Fixed issue where registration page is not set correctly during an upgrade. Fixed issue where Sendmail stripped HTML and Links from emails...mVu Mobile Viewer: mVu Mobile Viewer 0.7.10.0: Tube8 fix.EPPlus-Create advanced Excel 2007 spreadsheets on the server: EPPlus 2.8.0.1: EPPlus-Create advanced Excel 2007 spreadsheets on the serverNew Features Improved chart support Different chart-types series on the same chart Support for secondary axis and a lot of new properties Better styling Encryption and Workbook protection Table support Import csv files Array formulas ...and a lot of bugfixesAutoLoL: AutoLoL v1.4.2: Added support for more clients (French and Russian) Settings are now stored sepperatly for each user on a computer Auto Login is much faster now Auto Login detects and handles caps lock state properly nowTailspinSpyworks - WebForms Sample Application: TailspinSpyworks-v0.9: Contains a number of bug fixes and additional tutorial steps as well as complete database implementation details.ASP.NET MVC Project Awesome (rich jQuery AJAX helpers): 1.3 and demos: a library with mvc helpers and a demo project that demonstrates an awesome way of doing asp.net mvc. tested on mozilla, safari, chrome, opera, ie 9b/8/7/6 new stuff in 1.3 Autocomplete helper Autocomplete and AjaxDropdown can have parentId and be filled with data depending on the value of the parent PopupForm besides Content("ok") on success can also return Json(data) and use 'data' in a client side function Awesome demo improved (cruder, builder, added service layer)Nearforums - ASP.NET MVC forum engine: Nearforums v4.1: Version 4.1 of the ASP.NET MVC forum engine, with great improvements: TinyMCE added as visual editor for messages (removed CKEditor). Integrated AntiSamy for cleaner html user post and add more prevention to potential injections. Admin status page: a page for the site admin to check the current status of the configuration / db / etc. View Roadmap for more details.UltimateJB: UltimateJB 2.01 PL3 KakaRoto + PSNYes by EvilSperm: Voici une version attendu avec impatience pour beaucoup : - La Version PSNYes pour pouvoir jouer sur le PSN avec une PS3 Jailbreaker. - Pour l'instant le PSNYes n'est disponible qu'avec les PS3 en firmwares 3.41 !!! - La version PL3 KAKAROTO intégre ses dernières modification et prépare a l'intégration du Firmware 3.30 !!! Conclusion : - UltimateJB PSNYes => Valide l'utilisation du PSN : Uniquement compatible avec les 3.41 - ultimateJB DEFAULT => Pas de PSN mais disponible pour les PS3 sui...Fluent Ribbon Control Suite: Fluent Ribbon Control Suite 2.0: Fluent Ribbon Control Suite 2.0(supports .NET 4.0 RTM and .NET 3.5) Includes: Fluent.dll (with .pdb and .xml) Showcase Application Samples (only for .NET 4.0) Foundation (Tabs, Groups, Contextual Tabs, Quick Access Toolbar, Backstage) Resizing (ribbon reducing & enlarging principles) Galleries (Gallery in ContextMenu, InRibbonGallery) MVVM (shows how to use this library with Model-View-ViewModel pattern) KeyTips ScreenTips Toolbars ColorGallery NEW! *Walkthrough (documenta...patterns & practices: Prism: Prism 4 Documentation: This release contains the Prism 4 documentation in Help 1.0 (CHM) format and PDF format. The documentation is also included with the full download of the guidance. Note: If you cannot view the content of the CHM, using Windows Explorer, select the properties for the file and then click Unblock on the General tab. Note: The PDF version of the guidance is provided for printing and reading in book format. The online version of the Prism 4 documentation can be read here.Farseer Physics Engine: Farseer Physics Engine 3.1: DonationsIf you like this release and would like to keep Farseer Physics Engine running, please consider a small donation. What's new?We bring a lot of new features in Farseer Physics Engine 3.1. Just to name a few: New Box2D core Rope joint added More stable CCD algorithm YuPeng clipper Explosives logic New Constrained Delaunay Triangulation algorithm from the Poly2Tri project. New Flipcode triangulation algorithm. Silverlight 4 samples Silverlight 4 debug view XNA 4.0 relea...New Projectsbizicosoft crm: crmBlog Migrator: The Blog Migrator tool is an all purpose utility designed to help transition a blog from one platform to another. It leverages XML-RPC, BlogML, and WordPress WXR formats. It also provides the ability to "rewrite" your posts on your old blog to point to the new location.bzr-tfs integration tests: Used to test bzr-tfs integrationC++ Open Source Advanced Operating System: C++ Open Source Advanced Operating System is a project which allows starter developers create their own OS. For now it is at a really initial stage.Chavah - internet radio for Yeshua's disciples: Chavah (pronounced "ha-vah") is internet radio for Yeshua's disciples. Inspired by Pandora, Chavah is a Silverlight application that brings community-driven Messianic Jewish tunes for the Lord over the web to your eager ears.CodePoster: An add-in for Visual Studio which allows you to post code directly from Visual Studio to your blog. CRM 2011 Plugin Testing Tools: This solution is meant to make unit testing of plugins in CRM 2011 a simpler and more efficient process. This solution serializes the objects that the CRM server passes to a plugin on execution and then offers a library that allows you to deserialize them in a unit test.Edinamarry Free Tarot Software for Windows: A freeware yet an advanced Tarot reading divinity Software for Psychics and for all those who practice Divinity and Spirituality. This software includes Tarot Spread Designer, Tarot Deck Designer, Tarot Cards Gallery, Client & Customer Profile, Word Editor, Tarot Reader, etc.EPiSocial: Social addons for EPiServer.first team foundation project: this is my first project for the student to teach them about the ms visual studio 201o and team foundation serverFKTdev: Proyecto donde subiremos las pruebas, códigos de ejemplo y demás recursos en nuestro aprendizaje en XNA, hasta que comencemos un desarrollo estable.Gardens Point Component Pascal: Gardens Point Component Pascal is an implementation for .NET of the Component Pascal Language (CP). CP is an object oriented version of Pascal, and shares many design features with Oberon-2. Geoinformatics: geoinformaticsGREENHOUSEMANAGER: GREENHOUSE es un proyecto universitario para manejar los distintos aspectos de un invernadero. El sistema esta desarrollado en c# con interfaz grafica en WPFHousing: This project is only for the asp.net learning. HR-XML.NET: A .NET HR-XML Serialization Library. Also supports the Dutch SETU standard and some proprietary extensions used in the Netherlands. The project is currently targeting HR-XML version 2.5 and Setu standard 2008-01.InternetShop2: ShopLesson4: Lesson4 for M.Logical Synchronous Circuit Simulator: As part of a student project, we are trying to make a logic synchronous circuit simulator, with the ultimate goal of simulating a processor and a digital clock running on it.MediaOwl: MediaOwl is a music (albums, artists, tracks, tags) and movie (movies, series, actors, directors, genres) search engine, but above all, it is a Microsoft Silverlight 4 application (C#), that shows how to use Caliburn Micro.N2F Yverdon Solar Flare Reflector: The solar flare reflector provides minimal base-range protection for your N2F Yverdon installation against solar flare interference.Netduino Plus Home Automation Toolkit: The Netduino Plus Home Automation project is designed to proivde a communication platform from various consumer based home automation products that offer a common web service endpoint. This will hopefully create a low cost DIY alternative to the expensive ethernet interfaces.NRapid: NRapidOfficeHelper: Wrapper around the open xml office package. You can easily create xlsx documents based on a template xlsx document and reuse parts from that document, if you mark them as named ranges (i.e. "names").OffProjects: This is a private project which for my dev investigationParis Velib Stations for Windows Mobile: Allow to find the closest Velib bike station in Paris on a Windows Mobile Phone (6.5)/ Permet de trouver la station de Vélib la plus proche dans Paris ainsi que ses informations sur un smartphone Windows MobilePolarConverter: Adjust the measured distance of HRM files created by Polar Heart Rate monitorsSexy Select: a jQuery plugin that allows for easy manipulation of select options. Allows for adding, removing, sorting, validation and custom skinningSilverlight Progress Feedback: Demonstrates how to get progress feedback from slow running WPF processes in Silverlight.Silverlight Tabbed Panel: Tabbed Panel based on Silverlight targeted for both developers and designers audience. Tabbed Control is used in this project. This is a basic application. More features will be added in further releases. XAML has been used to design this panel. slabhid: SLABHIDDevice.dll is used for the SLAB MCU example code on PC, the original source code is written by C++. This wrapper class brings SLABHIDDevice.dll to the .Net world, so it will be possible to make some quick solution for firmware testing purpose.SuperWebSocket: A .NET server side implementation of WebSocket protocol.test1-jjoiner: just a test projectTotem Alpha Developer Framework For .Net: ????tadf??VS.NET???????????,????jtadf???????????????。 ?????????tadf??????????????J2EE???????VS.NET?????????,??tadf?????.NET??,???????????,????????????,??????C#??????????Java???????,??????。 tadf?????????????,????HTML???????????,???????,?????????,?????。tadf???????????,????????RICH UI?????WEB??。??????,??。 tadf?????????????????????,????WEB??????????。???????,???????????,?Ajax???????,????????????????,????????,????????????????。???????????,???????????????????????????????,?xml??????,?????????????xml...Ukázkové projekty: Obsahuje ukázkové projekty uživatele TenCoKaciStromy.WPFDemo: This Peoject is only for the WPF learning.Xinx TimeIt!: TinyAlarm is a small utility that allows you to configure an Alarm so that you can opt for 1. Shutdown computer 2. Play a sound 3. Show a note with sound 4. Disconnect a dial-up connection 5. Connect via dial-up connection

    Read the article

  • Problems configuring nameserver in plesk

    - by Saif Bechan
    Hello, i have some troubles with setting up a nameserver in PLESK for months now. I have tried all possible scenario's but i can not get this to work. I am really in need for some help, and if you can i will really appreciate it. Basically what i want is to just set up a nameserver in PLESK. I have a primary IP, and my host gave me a secondary nameserver i can use. My host is leaseweb in the netherlands. I have made some screenshots of the important parts in my opinion, maybe you guys can see some errors in them. To use the secondary nameserver provided by leaseweb i had to enable ACL on that account, i did so and made a screenshot of that too. The DNS recursion is set to localnets. These settings have not changed for months, so the dns should be fully updated everywhere. The check i run is the following: https://www.sidn.nl/over-nl/aanvraag...-server-check/ Domeinnaam (inclusief .nl): rdshosting.nl Eerste Nameserver: ns1.rdshosting.nl Eerste IP: 62.212.66.33 Tweede Nameserver: ns7.leaseweb.net Tweede ip: 62.212.76.50 If i run the dns check of the netherlands it gives me the following errors: primary name server "ns1.rdshosting.nl." Error: specified name server is not listed as NS record. All public name servers for a domain must also be listed as NS records in the zone of the domain. This domain was specified explicitly as a name server, but not found in the zone description of the primary name server. TE.6a rdshosting.nl. 86400 IN SOA ns1.rdspartners.nl. saif2k.hotmail.com. (2010031102 12H 1H 7D 3H) Error: the MNAME in SOA says "ns1.rdspartners.nl." is the primary name server. The MNAME field in the SOA record (first parameter) lists a different primary name server from the one specified for this check. RFC1035 section 3.3.13 rdshosting.nl. 86400 IN NS ns1.rdspartners.nl. Warning: hidden name server "ns1.rdspartners.nl." never used for first contact. The zone contains an NS record for a host which is not in the list of specified name servers. Hence, this name server will not be used to initiate contact to the domain. It may be used in sequential lookups, so it may still be useful. secondary name server "ns1.rdspartners.nl." [BROKEN] [HIDDEN] Failure: name server at 77.232.85.129 cannot be reached: (unknown error) The name server could not be contacted, which may be due to temporary technical problems or global DNS configuration mistakes. The internal error is shown, but not always clear about the cause. secondary name server "ns7.leaseweb.net." Info: name server looks correctly configured. I have the content of the file etc/named.conf also: // $Id: named.conf,v 1.1.1.1 2001/10/15 07:44:36 kap Exp $ // // Refer to the named(8) man page for details. If you are ever going // to setup a primary server, make sure you've understood the hairy // details of how DNS is working. Even with simple mistakes, you can // break connectivity for affected parties, or cause huge amount of // useless Internet traffic. options { allow-recursion { localnets; }; directory "/var"; auth-nxdomain no; pid-file "/var/run/named/named.pid"; // In addition to the "forwarders" clause, you can force your name // server to never initiate queries of its own, but always ask its // forwarders only, by enabling the following line: // // forward only; // If you've got a DNS server around at your upstream provider, enter // its IP address here, and enable the line below. This will make you // benefit from its cache, thus reduce overall DNS traffic in the Internet. /* forwarders { 127.0.0.1; }; */ /* * If there is a firewall between you and nameservers you want * to talk to, you might need to uncomment the query-source * directive below. Previous versions of BIND always asked * questions using port 53, but BIND 8.1 uses an unprivileged * port by default. */ // query-source address * port 53; /* * If running in a sandbox, you may have to specify a different * location for the dumpfile. */ // dump-file "s/named_dump.db"; }; //Use with the following in named.conf, adjusting the allow list as needed: key "rndc-key" { algorithm hmac-md5; secret "CeMgS23y0oWE20nyv0x40Q=="; }; controls { inet 127.0.0.1 port 953 allow { 127.0.0.1; } keys { "rndc-key"; }; }; // Note: the following will be supported in a future release. /* host { any; } { topology { 127.0.0.0/8; }; }; */ // Setting up secondaries is way easier and the rough picture for this // is explained below. // // If you enable a local name server, don't forget to enter 127.0.0.1 // into your /etc/resolv.conf so this server will be queried first. // Also, make sure to enable it in /etc/rc.conf. zone "." { type hint; file "named.root"; }; zone "0.0.127.IN-ADDR.ARPA" { type master; file "localhost.rev"; }; // NB: Do not use the IP addresses below, they are faked, and only // serve demonstration/documentation purposes! // // Example secondary config entries. It can be convenient to become // a secondary at least for the zone where your own domain is in. Ask // your network administrator for the IP address of the responsible // primary. // // Never forget to include the reverse lookup (IN-ADDR.ARPA) zone! // (This is the first bytes of the respective IP address, in reverse // order, with ".IN-ADDR.ARPA" appended.) // // Before starting to setup a primary zone, better make sure you fully // understand how DNS and BIND works, however. There are sometimes // unobvious pitfalls. Setting up a secondary is comparably simpler. // // NB: Don't blindly enable the examples below. :-) Use actual names // and addresses instead. // // NOTE!!! FreeBSD runs bind in a sandbox (see named_flags in rc.conf). // The directory containing the secondary zones must be write accessible // to bind. The following sequence is suggested: // // mkdir /etc/namedb/s // chown bind.bind /etc/namedb/s // chmod 750 /etc/namedb/s zone "rdshosting.nl" { type master; file "rdshosting.nl"; allow-transfer { 77.232.85.129; 62.212.76.50; common-allow-transfer; }; }; zone "66.212.62.in-addr.arpa" { type master; file "66.212.62.in-addr.arpa"; allow-transfer { common-allow-transfer; }; }; acl common-allow-transfer { 62.212.76.50; }; As i mentioned i made some screenshots of some parts: First the dns settings in plesk: http://www.freeimagehosting.net/uploads/2480faed5e.jpg Second the acl settings in plesk: http://www.freeimagehosting.net/uploads/777f5e69b0.jpg Third my settings at leaseweb: http://www.freeimagehosting.net/uploads/de7122b19c.jpg And last the secondary nameserver settings from leaseweb: http://www.freeimagehosting.net/uploads/fd1da38a8f.jpg If someone has anysuggestion at all on this this will be highly appriciated. Thank you for your time! PS. I am dutch so dutch answers are welcome aswell

    Read the article

  • Using BPEL Performance Statistics to Diagnose Performance Bottlenecks

    - by fip
    Tuning performance of Oracle SOA 11G applications could be challenging. Because SOA is a platform for you to build composite applications that connect many applications and "services", when the overall performance is slow, the bottlenecks could be anywhere in the system: the applications/services that SOA connects to, the infrastructure database, or the SOA server itself.How to quickly identify the bottleneck becomes crucial in tuning the overall performance. Fortunately, the BPEL engine in Oracle SOA 11G (and 10G, for that matter) collects BPEL Engine Performance Statistics, which show the latencies of low level BPEL engine activities. The BPEL engine performance statistics can make it a bit easier for you to identify the performance bottleneck. Although the BPEL engine performance statistics are always available, the access to and interpretation of them are somewhat obscure in the early and current (PS5) 11G versions. This blog attempts to offer instructions that help you to enable, retrieve and interpret the performance statistics, before the future versions provides a more pleasant user experience. Overview of BPEL Engine Performance Statistics  SOA BPEL has a feature of collecting some performance statistics and store them in memory. One MBean attribute, StatLastN, configures the size of the memory buffer to store the statistics. This memory buffer is a "moving window", in a way that old statistics will be flushed out by the new if the amount of data exceeds the buffer size. Since the buffer size is limited by StatLastN, impacts of statistics collection on performance is minimal. By default StatLastN=-1, which means no collection of performance data. Once the statistics are collected in the memory buffer, they can be retrieved via another MBean oracle.as.soainfra.bpel:Location=[Server Name],name=BPELEngine,type=BPELEngine.> My friend in Oracle SOA development wrote this simple 'bpelstat' web app that looks up and retrieves the performance data from the MBean and displays it in a human readable form. It does not have beautiful UI but it is fairly useful. Although in Oracle SOA 11.1.1.5 onwards the same statistics can be viewed via a more elegant UI under "request break down" at EM -> SOA Infrastructure -> Service Engines -> BPEL -> Statistics, some unsophisticated minds like mine may still prefer the simplicity of the 'bpelstat' JSP. One thing that simple JSP does do well is that you can save the page and send it to someone to further analyze Follows are the instructions of how to install and invoke the BPEL statistic JSP. My friend in SOA Development will soon blog about interpreting the statistics. Stay tuned. Step1: Enable BPEL Engine Statistics for Each SOA Servers via Enterprise Manager First st you need to set the StatLastN to some number as a way to enable the collection of BPEL Engine Performance Statistics EM Console -> soa-infra(Server Name) -> SOA Infrastructure -> SOA Administration -> BPEL Properties Click on "More BPEL Configuration Properties" Click on attribute "StatLastN", set its value to some integer number. Typically you want to set it 1000 or more. Step 2: Download and Deploy bpelstat.war File to Admin Server, Note: the WAR file contains a JSP that does NOT have any security restriction. You do NOT want to keep in your production server for a long time as it is a security hazard. Deactivate the war once you are done. Download the bpelstat.war to your local PC At WebLogic Console, Go to Deployments -> Install Click on the "upload your file(s)" Click the "Browse" button to upload the deployment to Admin Server Accept the uploaded file as the path, click next Check the default option "Install this deployment as an application" Check "AdminServer" as the target server Finish the rest of the deployment with default settings Console -> Deployments Check the box next to "bpelstat" application Click on the "Start" button. It will change the state of the app from "prepared" to "active" Step 3: Invoke the BPEL Statistic Tool The BPELStat tool merely call the MBean of BPEL server and collects and display the in-memory performance statics. You usually want to do that after some peak loads. Go to http://<admin-server-host>:<admin-server-port>/bpelstat Enter the correct admin hostname, port, username and password Enter the SOA Server Name from which you want to collect the performance statistics. For example, SOA_MS1, etc. Click Submit Keep doing the same for all SOA servers. Step 3: Interpret the BPEL Engine Statistics You will see a few categories of BPEL Statistics from the JSP Page. First it starts with the overall latency of BPEL processes, grouped by synchronous and asynchronous processes. Then it provides the further break down of the measurements through the life time of a BPEL request, which is called the "request break down". 1. Overall latency of BPEL processes The top of the page shows that the elapse time of executing the synchronous process TestSyncBPELProcess from the composite TestComposite averages at about 1543.21ms, while the elapse time of executing the asynchronous process TestAsyncBPELProcess from the composite TestComposite2 averages at about 1765.43ms. The maximum and minimum latency were also shown. Synchronous process statistics <statistics>     <stats key="default/TestComposite!2.0.2-ScopedJMSOSB*soa_bfba2527-a9ba-41a7-95c5-87e49c32f4ff/TestSyncBPELProcess" min="1234" max="4567" average="1543.21" count="1000">     </stats> </statistics> Asynchronous process statistics <statistics>     <stats key="default/TestComposite2!2.0.2-ScopedJMSOSB*soa_bfba2527-a9ba-41a7-95c5-87e49c32f4ff/TestAsyncBPELProcess" min="2234" max="3234" average="1765.43" count="1000">     </stats> </statistics> 2. Request break down Under the overall latency categorized by synchronous and asynchronous processes is the "Request breakdown". Organized by statistic keys, the Request breakdown gives finer grain performance statistics through the life time of the BPEL requests.It uses indention to show the hierarchy of the statistics. Request breakdown <statistics>     <stats key="eng-composite-request" min="0" max="0" average="0.0" count="0">         <stats key="eng-single-request" min="22" max="606" average="258.43" count="277">             <stats key="populate-context" min="0" max="0" average="0.0" count="248"> Please note that in SOA 11.1.1.6, the statistics under Request breakdown is aggregated together cross all the BPEL processes based on statistic keys. It does not differentiate between BPEL processes. If two BPEL processes happen to have the statistic that share same statistic key, the statistics from two BPEL processes will be aggregated together. Keep this in mind when we go through more details below. 2.1 BPEL process activity latencies A very useful measurement in the Request Breakdown is the performance statistics of the BPEL activities you put in your BPEL processes: Assign, Invoke, Receive, etc. The names of the measurement in the JSP page directly come from the names to assign to each BPEL activity. These measurements are under the statistic key "actual-perform" Example 1:  Follows is the measurement for BPEL activity "AssignInvokeCreditProvider_Input", which looks like the Assign activity in a BPEL process that assign an input variable before passing it to the invocation:                                <stats key="AssignInvokeCreditProvider_Input" min="1" max="8" average="1.9" count="153">                                     <stats key="sensor-send-activity-data" min="0" max="1" average="0.0" count="306">                                     </stats>                                     <stats key="sensor-send-variable-data" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="monitor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                 </stats> Note: because as previously mentioned that the statistics cross all BPEL processes are aggregated together based on statistic keys, if two BPEL processes happen to name their Invoke activity the same name, they will show up at one measurement (i.e. statistic key). Example 2: Follows is the measurement of BPEL activity called "InvokeCreditProvider". You can not only see that by average it takes 3.31ms to finish this call (pretty fast) but also you can see from the further break down that most of this 3.31 ms was spent on the "invoke-service".                                  <stats key="InvokeCreditProvider" min="1" max="13" average="3.31" count="153">                                     <stats key="initiate-correlation-set-again" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="invoke-service" min="1" max="13" average="3.08" count="153">                                         <stats key="prep-call" min="0" max="1" average="0.04" count="153">                                         </stats>                                     </stats>                                     <stats key="initiate-correlation-set" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="sensor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                     <stats key="sensor-send-variable-data" min="0" max="0" average="0.0" count="153">                                     </stats>                                     <stats key="monitor-send-activity-data" min="0" max="0" average="0.0" count="306">                                     </stats>                                     <stats key="update-audit-trail" min="0" max="2" average="0.03" count="153">                                     </stats>                                 </stats> 2.2 BPEL engine activity latency Another type of measurements under Request breakdown are the latencies of underlying system level engine activities. These activities are not directly tied to a particular BPEL process or process activity, but they are critical factors in the overall engine performance. These activities include the latency of saving asynchronous requests to database, and latency of process dehydration. My friend Malkit Bhasin is working on providing more information on interpreting the statistics on engine activities on his blog (https://blogs.oracle.com/malkit/). I will update this blog once the information becomes available. Update on 2012-10-02: My friend Malkit Bhasin has published the detail interpretation of the BPEL service engine statistics at his blog http://malkit.blogspot.com/2012/09/oracle-bpel-engine-soa-suite.html.

    Read the article

  • Is your team is a high-performing team?

    As a child I can remember looking out of the car window as my father drove along the Interstate in Florida while seeing prisoners wearing bright orange jump suits and prison guards keeping a watchful eye on them. The prisoners were taking part in a prison road gang. These road gangs were formed to help the state maintain the state highway infrastructure. The prisoner’s primary responsibilities are to pick up trash and debris from the roadway. This is a prime example of a work group or working group used by most prison systems in the United States. Work groups or working groups can be defined as a collection of individuals or entities working together to achieve a specific goal or accomplish a specific set of tasks. Typically these groups are only established for a short period of time and are dissolved once the desired outcome has been achieved. More often than not group members usually feel as though they are expendable to the group and some even dread that they are even in the group. "A team is a small number of people with complementary skills who are committed to a common purpose, performance goals, and approach for which they are mutually accountable." (Katzenbach and Smith, 1993) So how do you determine that a team is a high-performing team?  This can be determined by three base line criteria that include: consistently high quality output, the promotion of personal growth and well being of all team members, and most importantly the ability to learn and grow as a unit. Initially, a team can successfully create high-performing output without meeting all three criteria, however this will erode over time because team members will feel detached from the group or that they are not growing then the quality of the output will decline. High performing teams are similar to work groups because they both utilize a collection of individuals or entities to accomplish tasks. What distinguish a high-performing team from a work group are its characteristics. High-performing teams contain five core characteristics. These characteristics are what separate a group from a team. The five characteristics of a high-performing team include: Purpose, Performance Measures, People with Tasks and Relationship Skills, Process, and Preparation and Practice. A high-performing team is much more than a work group, and typically has a life cycle that can vary from team to team. The standard team lifecycle consists of five states and is comparable to a human life cycle. The five states of a high-performing team lifecycle include: Formulating, Storming, Normalizing, Performing, and Adjourning. The Formulating State of a team is first realized when the team members are first defined and roles are assigned to all members. This initial stage is very important because it can set the tone for the team and can ultimately determine its success or failure. In addition, this stage requires the team to have a strong leader because team members are normally unclear about specific roles, specific obstacles and goals that my lay ahead of them.  Finally, this stage is where most team members initially meet one another prior to working as a team unless the team members already know each other. The Storming State normally arrives directly after the formulation of a new team because there are still a lot of unknowns amongst the newly formed assembly. As a general rule most of the parties involved in the team are still getting used to the workload, pace of work, deadlines and the validity of various tasks that need to be performed by the group.  In this state everything is questioned because there are so many unknowns. Items commonly questioned include the credentials of others on the team, the actual validity of a project, and the leadership abilities of the team leader.  This can be exemplified by looking at the interactions between animals when they first meet.  If we look at a scenario where two people are walking directly toward each other with their dogs. The dogs will automatically enter the Storming State because they do not know the other dog. Typically in this situation, they attempt to define which is more dominating via play or fighting depending on how the dogs interact with each other. Once dominance has been defined and accepted by both dogs then they will either want to play or leave depending on how the dogs interacted and other environmental variables. Once the Storming State has been realized then the Normalizing State takes over. This state is entered by a team once all the questions of the Storming State have been answered and the team has been tested by a few tasks or projects.  Typically, participants in the team are filled with energy, and comradery, and a strong alliance with team goals and objectives.  A high school football team is a perfect example of the Normalizing State when they start their season.  The player positions have been assigned, the depth chart has been filled and everyone is focused on winning each game. All of the players encourage and expect each other to perform at the best of their abilities and are united by competition from other teams. The Performing State is achieved by a team when its history, working habits, and culture solidify the team as one working unit. In this state team members can anticipate specific behaviors, attitudes, reactions, and challenges are seen as opportunities and not problems. Additionally, each team member knows their role in the team’s success, and the roles of others. This is the most productive state of a group and is where all the time invested working together really pays off. If you look at an Olympic figure skating team skate you can easily see how the time spent working together benefits their performance. They skate as one unit even though it is comprised of two skaters. Each skater has their routine completely memorized as well as their partners. This allows them to anticipate each other’s moves on the ice makes their skating look effortless. The final state of a team is the Adjourning State. This state is where accomplishments by the team and each individual team member are recognized. Additionally, this state also allows for reflection of the interactions between team members, work accomplished and challenges that were faced. Finally, the team celebrates the challenges they have faced and overcome as a unit. Currently in the workplace teams are divided into two different types: Co-located and Distributed Teams. Co-located teams defined as the traditional group of people working together in an office, according to Andy Singleton of Assembla. This traditional type of a team has dominated business in the past due to inadequate technology, which forced workers to primarily interact with one another via face to face meetings.  Team meetings are primarily lead by the person with the highest status in the company. Having personally, participated in meetings of this type, usually a select few of the team members dominate the flow of communication which reduces the input of others in group discussions. Since discussions are dominated by a select few individuals the discussions and group discussion are skewed in favor of the individuals who communicate the most in meetings. In addition, Team members might not give their full opinions on a topic of discussion in part not to offend or create controversy amongst the team and can alter decision made in meetings towards those of the opinions of the dominating team members. Distributed teams are by definition spread across an area or subdivided into separate sections. That is exactly what distributed teams when compared to a more traditional team. It is common place for distributed teams to have team members across town, in the next state, across the country and even with the advances in technology over the last 20 year across the world. These teams allow for more diversity compared to the other type of teams because they allow for more flexibility regarding location. A team could consist of a 30 year old male Italian project manager from New York, a 50 year old female Hispanic from California and a collection of programmers from India because technology allows them to communicate as if they were standing next to one another.  In addition, distributed team members consult with more team members prior to making decisions compared to traditional teams, and take longer to come to decisions due to the changes in time zones and cultural events. However, team members feel more empowered to speak out when they do not agree with the team and to notify others of potential issues regarding the work that the team is doing. Virtual teams which are a subset of the distributed team type is changing organizational strategies due to the fact that a team can now in essence be working 24 hrs a day because of utilizing employees in various time zones and locations.  A primary example of this is with customer services departments, a company can have multiple call centers spread across multiple time zones allowing them to appear to be open 24 hours a day while all a employees work from 9AM to 5 PM every day. Virtual teams also allow human resources departments to go after the best talent for the company regardless of where the potential employee works because they will be a part of a virtual team all that is need is the proper technology to be setup to allow everyone to communicate. In addition to allowing employees to work from home, the company can save space and resources by not having to provide a desk for every team member. In fact, those team members that randomly come into the office can actually share one desk amongst multiple people. This is definitely a cost cutting plus given the current state of the economy. One thing that can turn a team into a high-performing team is leadership. High-performing team leaders need to focus on investing in ongoing personal development, provide team members with direction, structure, and resources needed to accomplish their work, make the right interventions at the right time, and help the team manage boundaries between the team and various external parties involved in the teams work. A team leader needs to invest in ongoing personal development in order to effectively manage their team. People have said that attitude is everything; this is very true about leaders and leadership. A team takes on the attitudes and behaviors of its leaders. This can potentially harm the team and the team’s output. Leaders must concentrate on self-awareness, and understanding their team’s group dynamics to fully understand how to lead them. In addition, always learning new leadership techniques from other effective leaders is also very beneficial. Providing team members with direction, structure, and resources that they need to accomplish their work collectively sounds easy, but it is not.  Leaders need to be able to effectively communicate with their team on how their work helps the company reach for its organizational vision. Conversely, the leader needs to allow his team to work autonomously within specific guidelines to turn the company’s vision into a reality.  This being said the team must be appropriately staffed according to the size of the team’s tasks and their complexity. These tasks should be clear, and be meaningful to the company’s objectives and allow for feedback to be exchanged with the leader and the team member and the leader and upper management. Now if the team is properly staffed, and has a clear and full understanding of what is to be done; the company also must supply the workers with the proper tools to achieve the tasks that they are asked to do. No one should be asked to dig a hole without being given a shovel.  Finally, leaders must reward their team members for accomplishments that they achieve. Awards could range from just a simple congratulatory email, a party to close the completion of a large project, or other monetary rewards. Managing boundaries is very important for team leaders because it can alter attitudes of team members and can add undue stress to the team which will force them to loose focus on the tasks at hand for the group. Team leaders should promote communication between team members so that burdens are shared amongst the team and solutions can be derived from hearing the opinions of multiple sources. This also reinforces team camaraderie and working as a unit. Team leaders must manage the type and timing of interventions as to not create an even bigger mess within the team. Poorly timed interventions can really deflate team members and make them question themselves. This could really increase further and undue interventions by the team leader. Typically, the best time for interventions is when the team is just starting to form so that all unproductive behaviors are removed from the team and that it can retain focus on its agenda. If an intervention is effectively executed the team will feel energized about the work that they are doing, promote communication and interaction amongst the group and improve moral overall. High-performing teams are very import to organizations because they consistently produce high quality output and develop a collective purpose for their work. This drive to succeed allows team members to utilize specific talents allowing for growth in these areas.  In addition, these team members usually take on a sense of ownership with their projects and feel that the other team members are irreplaceable. References: http://blog.assembla.com/assemblablog/tabid/12618/bid/3127/Three-ways-to-organize-your-team-co-located-outsourced-or-global.aspx Katzenbach, J.R. & Smith, D.K. (1993). The Wisdom of Teams: Creating the High-performance Organization. Boston: Harvard Business School.

    Read the article

  • Simple MSBuild Configuration: Updating Assemblies With A Version Number

    - by srkirkland
    When distributing a library you often run up against versioning problems, once facet of which is simply determining which version of that library your client is running.  Of course, each project in your solution has an AssemblyInfo.cs file which provides, among other things, the ability to set the Assembly name and version number.  Unfortunately, setting the assembly version here would require not only changing the version manually for each build (depending on your schedule), but keeping it in sync across all projects.  There are many ways to solve this versioning problem, and in this blog post I’m going to try to explain what I think is the easiest and most flexible solution.  I will walk you through using MSBuild to create a simple build script, and I’ll even show how to (optionally) integrate with a Team City build server.  All of the code from this post can be found at https://github.com/srkirkland/BuildVersion. Create CommonAssemblyInfo.cs The first step is to create a common location for the repeated assembly info that is spread across all of your projects.  Create a new solution-level file (I usually create a Build/ folder in the solution root, but anywhere reachable by all your projects will do) called CommonAssemblyInfo.cs.  In here you can put any information common to all your assemblies, including the version number.  An example CommonAssemblyInfo.cs is as follows: using System.Reflection; using System.Resources; using System.Runtime.InteropServices;   [assembly: AssemblyCompany("University of California, Davis")] [assembly: AssemblyProduct("BuildVersionTest")] [assembly: AssemblyCopyright("Scott Kirkland & UC Regents")] [assembly: AssemblyConfiguration("")] [assembly: AssemblyTrademark("")]   [assembly: ComVisible(false)]   [assembly: AssemblyVersion("1.2.3.4")] //Will be replaced   [assembly: NeutralResourcesLanguage("en-US")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; }   Cleanup AssemblyInfo.cs & Link CommonAssemblyInfo.cs For each of your projects, you’ll want to clean up your assembly info to contain only information that is unique to that assembly – everything else will go in the CommonAssemblyInfo.cs file.  For most of my projects, that just means setting the AssemblyTitle, though you may feel AssemblyDescription is warranted.  An example AssemblyInfo.cs file is as follows: using System.Reflection;   [assembly: AssemblyTitle("BuildVersionTest")] .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Next, you need to “link” the CommonAssemblyinfo.cs file into your projects right beside your newly lean AssemblyInfo.cs file.  To do this, right click on your project and choose Add | Existing Item from the context menu.  Navigate to your CommonAssemblyinfo.cs file but instead of clicking Add, click the little down-arrow next to add and choose “Add as Link.”  You should see a little link graphic similar to this: We’ve actually reduced complexity a lot already, because if you build all of your assemblies will have the same common info, including the product name and our static (fake) assembly version.  Let’s take this one step further and introduce a build script. Create an MSBuild file What we want from the build script (for now) is basically just to have the common assembly version number changed via a parameter (eventually to be passed in by the build server) and then for the project to build.  Also we’d like to have a flexibility to define what build configuration to use (debug, release, etc). In order to find/replace the version number, we are going to use a Regular Expression to find and replace the text within your CommonAssemblyInfo.cs file.  There are many other ways to do this using community build task add-ins, but since we want to keep it simple let’s just define the Regular Expression task manually in a new file, Build.tasks (this example taken from the NuGet build.tasks file). <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <UsingTask TaskName="RegexTransform" TaskFactory="CodeTaskFactory" AssemblyFile="$(MSBuildToolsPath)\Microsoft.Build.Tasks.v4.0.dll"> <ParameterGroup> <Items ParameterType="Microsoft.Build.Framework.ITaskItem[]" /> </ParameterGroup> <Task> <Using Namespace="System.IO" /> <Using Namespace="System.Text.RegularExpressions" /> <Using Namespace="Microsoft.Build.Framework" /> <Code Type="Fragment" Language="cs"> <![CDATA[ foreach(ITaskItem item in Items) { string fileName = item.GetMetadata("FullPath"); string find = item.GetMetadata("Find"); string replaceWith = item.GetMetadata("ReplaceWith"); if(!File.Exists(fileName)) { Log.LogError(null, null, null, null, 0, 0, 0, 0, String.Format("Could not find version file: {0}", fileName), new object[0]); } string content = File.ReadAllText(fileName); File.WriteAllText( fileName, Regex.Replace( content, find, replaceWith ) ); } ]]> </Code> </Task> </UsingTask> </Project> .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } If you glance at the code, you’ll see it’s really just going a Regex.Replace() on a given file, which is exactly what we need. Now we are ready to write our build file, called (by convention) Build.proj. <?xml version="1.0" encoding="utf-8"?> <Project ToolsVersion="4.0" DefaultTargets="Go" xmlns="http://schemas.microsoft.com/developer/msbuild/2003"> <Import Project="$(MSBuildProjectDirectory)\Build.tasks" /> <PropertyGroup> <Configuration Condition="'$(Configuration)' == ''">Debug</Configuration> <SolutionRoot>$(MSBuildProjectDirectory)</SolutionRoot> </PropertyGroup>   <ItemGroup> <RegexTransform Include="$(SolutionRoot)\CommonAssemblyInfo.cs"> <Find>(?&lt;major&gt;\d+)\.(?&lt;minor&gt;\d+)\.\d+\.(?&lt;revision&gt;\d+)</Find> <ReplaceWith>$(BUILD_NUMBER)</ReplaceWith> </RegexTransform> </ItemGroup>   <Target Name="Go" DependsOnTargets="UpdateAssemblyVersion; Build"> </Target>   <Target Name="UpdateAssemblyVersion" Condition="'$(BUILD_NUMBER)' != ''"> <RegexTransform Items="@(RegexTransform)" /> </Target>   <Target Name="Build"> <MSBuild Projects="$(SolutionRoot)\BuildVersionTest.sln" Targets="Build" /> </Target>   </Project> Reviewing this MSBuild file, we see that by default the “Go” target will be called, which in turn depends on “UpdateAssemblyVersion” and then “Build.”  We go ahead and import the Bulid.tasks file and then setup some handy properties for setting the build configuration and solution root (in this case, my build files are in the solution root, but we might want to create a Build/ directory later).  The rest of the file flows logically, we setup the RegexTransform to match version numbers such as <major>.<minor>.1.<revision> (1.2.3.4 in our example) and replace it with a $(BUILD_NUMBER) parameter which will be supplied externally.  The first target, “UpdateAssemblyVersion” just runs the RegexTransform, and the second target, “Build” just runs the default MSBuild on our solution. Testing the MSBuild file locally Now we have a build file which can replace assembly version numbers and build, so let’s setup a quick batch file to be able to build locally.  To do this you simply create a file called Build.cmd and have it call MSBuild on your Build.proj file.  I’ve added a bit more flexibility so you can specify build configuration and version number, which makes your Build.cmd look as follows: set config=%1 if "%config%" == "" ( set config=debug ) set version=%2 if "%version%" == "" ( set version=2.3.4.5 ) %WINDIR%\Microsoft.NET\Framework\v4.0.30319\msbuild Build.proj /p:Configuration="%config%" /p:build_number="%version%" .csharpcode, .csharpcode pre { font-size: small; color: black; font-family: consolas, "Courier New", courier, monospace; background-color: #ffffff; /*white-space: pre;*/ } .csharpcode pre { margin: 0em; } .csharpcode .rem { color: #008000; } .csharpcode .kwrd { color: #0000ff; } .csharpcode .str { color: #006080; } .csharpcode .op { color: #0000c0; } .csharpcode .preproc { color: #cc6633; } .csharpcode .asp { background-color: #ffff00; } .csharpcode .html { color: #800000; } .csharpcode .attr { color: #ff0000; } .csharpcode .alt { background-color: #f4f4f4; width: 100%; margin: 0em; } .csharpcode .lnum { color: #606060; } Now if you click on the Build.cmd file, you will get a default debug build using the version 2.3.4.5.  Let’s run it in a command window with the parameters set for a release build version 2.0.1.453.   Excellent!  We can now run one simple command and govern the build configuration and version number of our entire solution.  Each DLL produced will have the same version number, making determining which version of a library you are running very simple and accurate. Configure the build server (TeamCity) Of course you are not really going to want to run a build command manually every time, and typing in incrementing version numbers will also not be ideal.  A good solution is to have a computer (or set of computers) act as a build server and build your code for you, providing you a consistent environment, excellent reporting, and much more.  One of the most popular Build Servers is JetBrains’ TeamCity, and this last section will show you the few configuration parameters to use when setting up a build using your MSBuild file created earlier.  If you are using a different build server, the same principals should apply. First, when setting up the project you want to specify the “Build Number Format,” often given in the form <major>.<minor>.<revision>.<build>.  In this case you will set major/minor manually, and optionally revision (or you can use your VCS revision number with %build.vcs.number%), and then build using the {0} wildcard.  Thus your build number format might look like this: 2.0.1.{0}.  During each build, this value will be created and passed into the $BUILD_NUMBER variable of our Build.proj file, which then uses it to decorate your assemblies with the proper version. After setting up the build number, you must choose MSBuild as the Build Runner, then provide a path to your build file (Build.proj).  After specifying your MSBuild Version (equivalent to your .NET Framework Version), you have the option to specify targets (the default being “Go”) and additional MSBuild parameters.  The one parameter that is often useful is manually setting the configuration property (/p:Configuration="Release") if you want something other than the default (which is Debug in our example).  Your resulting configuration will look something like this: [Under General Settings] [Build Runner Settings]   Now every time your build is run, a newly incremented build version number will be generated and passed to MSBuild, which will then version your assemblies and build your solution.   A Quick Review Our goal was to version our output assemblies in an automated way, and we accomplished it by performing a few quick steps: Move the common assembly information, including version, into a linked CommonAssemblyInfo.cs file Create a simple MSBuild script to replace the common assembly version number and build your solution Direct your build server to use the created MSBuild script That’s really all there is to it.  You can find all of the code from this post at https://github.com/srkirkland/BuildVersion. Enjoy!

    Read the article

  • Built-in GZip/Deflate Compression on IIS 7.x

    - by Rick Strahl
    IIS 7 improves internal compression functionality dramatically making it much easier than previous versions to take advantage of compression that’s built-in to the Web server. IIS 7 also supports dynamic compression which allows automatic compression of content created in your own applications (ASP.NET or otherwise!). The scheme is based on content-type sniffing and so it works with any kind of Web application framework. While static compression on IIS 7 is super easy to set up and turned on by default for most text content (text/*, which includes HTML and CSS, as well as for JavaScript, Atom, XAML, XML), setting up dynamic compression is a bit more involved, mostly because the various default compression settings are set in multiple places down the IIS –> ASP.NET hierarchy. Let’s take a look at each of the two approaches available: Static Compression Compresses static content from the hard disk. IIS can cache this content by compressing the file once and storing the compressed file on disk and serving the compressed alias whenever static content is requested and it hasn’t changed. The overhead for this is minimal and should be aggressively enabled. Dynamic Compression Works against application generated output from applications like your ASP.NET apps. Unlike static content, dynamic content must be compressed every time a page that requests it regenerates its content. As such dynamic compression has a much bigger impact than static caching. How Compression is configured Compression in IIS 7.x  is configured with two .config file elements in the <system.WebServer> space. The elements can be set anywhere in the IIS/ASP.NET configuration pipeline all the way from ApplicationHost.config down to the local web.config file. The following is from the the default setting in ApplicationHost.config (in the %windir%\System32\inetsrv\config forlder) on IIS 7.5 with a couple of small adjustments (added json output and enabled dynamic compression): <?xml version="1.0" encoding="UTF-8"?> <configuration> <system.webServer> <httpCompression directory="%SystemDrive%\inetpub\temp\IIS Temporary Compressed Files"> <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> <dynamicTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/json" enabled="true" /> <add mimeType="*/*" enabled="false" /> </dynamicTypes> <staticTypes> <add mimeType="text/*" enabled="true" /> <add mimeType="message/*" enabled="true" /> <add mimeType="application/x-javascript" enabled="true" /> <add mimeType="application/atom+xml" enabled="true" /> <add mimeType="application/xaml+xml" enabled="true" /> <add mimeType="*/*" enabled="false" /> </staticTypes> </httpCompression> <urlCompression doStaticCompression="true" doDynamicCompression="true" /> </system.webServer> </configuration> You can find documentation on the httpCompression and urlCompression keys here respectively: http://msdn.microsoft.com/en-us/library/ms690689%28v=vs.90%29.aspx http://msdn.microsoft.com/en-us/library/aa347437%28v=vs.90%29.aspx The httpCompression Element – What and How to compress Basically httpCompression configures what types to compress and how to compress them. It specifies the DLL that handles gzip encoding and the types of documents that are to be compressed. Types are set up based on mime-types which looks at returned Content-Type headers in HTTP responses. For example, I added the application/json to mime type to my dynamic compression types above to allow that content to be compressed as well since I have quite a bit of AJAX content that gets sent to the client. The UrlCompression Element – Enables and Disables Compression The urlCompression element is a quick way to turn compression on and off. By default static compression is enabled server wide, and dynamic compression is disabled server wide. This might be a bit confusing because the httpCompression element also has a doDynamicCompression attribute which is set to true by default, but the urlCompression attribute by the same name actually overrides it. The urlCompression element only has three attributes: doStaticCompression, doDynamicCompression and dynamicCompressionBeforeCache. The doCompression attributes are the final determining factor whether compression is enabled, so it’s a good idea to be explcit! The default for doDynamicCompression='false”, but doStaticCompression="true"! Static Compression is enabled by Default, Dynamic Compression is not Because static compression is very efficient in IIS 7 it’s enabled by default server wide and there probably is no reason to ever change that setting. Dynamic compression however, since it’s more resource intensive, is turned off by default. If you want to enable dynamic compression there are a few quirks you have to deal with, namely that enabling it in ApplicationHost.config doesn’t work. Setting: <urlCompression doDynamicCompression="true" /> in applicationhost.config appears to have no effect and I had to move this element into my local web.config to make dynamic compression work. This is actually a smart choice because you’re not likely to want dynamic compression in every application on a server. Rather dynamic compression should be applied selectively where it makes sense. However, nowhere is it documented that the setting in applicationhost.config doesn’t work (or more likely is overridden somewhere and disabled lower in the configuration hierarchy). So: remember to set doDynamicCompression=”true” in web.config!!! How Static Compression works Static compression works against static content loaded from files on disk. Because this content is static and not bound to change frequently – such as .js, .css and static HTML content – it’s fairly easy for IIS to compress and then cache the compressed content. The way this works is that IIS compresses the files into a special folder on the server’s hard disk and then reads the content from this location if already compressed content is requested and the underlying file resource has not changed. The semantics of serving an already compressed file are very efficient – IIS still checks for file changes, but otherwise just serves the already compressed file from the compression folder. The compression folder is located at: %windir%\inetpub\temp\IIS Temporary Compressed Files\ApplicationPool\ If you look into the subfolders you’ll find compressed files: These files are pre-compressed and IIS serves them directly to the client until the underlying files are changed. As I mentioned before – static compression is on by default and there’s very little reason to turn that functionality off as it is efficient and just works out of the box. The one tweak you might want to do is to set the compression level to maximum. Since IIS only compresses content very infrequently it would make sense to apply maximum compression. You can do this with the staticCompressionLevel setting on the scheme element: <scheme name="gzip" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> Other than that the default settings are probably just fine. Dynamic Compression – not so fast! By default dynamic compression is disabled and that’s actually quite sensible – you should use dynamic compression very carefully and think about what content you want to compress. In most applications it wouldn’t make sense to compress *all* generated content as it would generate a significant amount of overhead. Scott Fortsyth has a great post that details some of the performance numbers and how much impact dynamic compression has. Depending on how busy your server is you can play around with compression and see what impact it has on your server’s performance. There are also a few settings you can tweak to minimize the overhead of dynamic compression. Specifically the httpCompression key has a couple of CPU related keys that can help minimize the impact of Dynamic Compression on a busy server: dynamicCompressionDisableCpuUsage dynamicCompressionEnableCpuUsage By default these are set to 90 and 50 which means that when the CPU hits 90% compression will be disabled until CPU utilization drops back down to 50%. Again this is actually quite sensible as it utilizes CPU power from compression when available and falling off when the threshold has been hit. It’s a good way some of that extra CPU power on your big servers to use when utilization is low. Again these settings are something you likely have to play with. I would probably set the upper limit a little lower than 90% maybe around 70% to make this a feature that kicks in only if there’s lots of power to spare. I’m not really sure how accurate these CPU readings that IIS uses are as Cpu usage on Web Servers can spike drastically even during low loads. Don’t trust settings – do some load testing or monitor your server in a live environment to see what values make sense for your environment. Finally for dynamic compression I tend to add one Mime type for JSON data, since a lot of my applications send large chunks of JSON data over the wire. You can do that with the application/json content type: <add mimeType="application/json" enabled="true" /> What about Deflate Compression? The default compression is GZip. The documentation hints that you can use a different compression scheme and mentions Deflate compression. And sure enough you can change the compression settings to: <scheme name="deflate" dll="%Windir%\system32\inetsrv\gzip.dll" staticCompressionLevel="9" /> to get deflate style compression. The deflate algorithm produces slightly more compact output so I tend to prefer it over GZip but more HTTP clients (other than browsers) support GZip than Deflate so be careful with this option if you build Web APIs. I also had some issues with the above value actually being applied right away. Changing the scheme in applicationhost.config didn’t show up on the site  right away. It required me to do a full IISReset to get that change to show up before I saw the change over to deflate compressed content. Content was slightly more compressed with deflate – not sure if it’s worth the slightly less common compression type, but the option at least is available. IIS 7 finally makes GZip Easy In summary IIS 7 makes GZip easy finally, even if the configuration settings are a bit obtuse and the documentation is seriously lacking. But once you know the basic settings I’ve described here and the fact that you can override all of this in your local web.config it’s pretty straight forward to configure GZip support and tweak it exactly to your needs. Static compression is a total no brainer as it adds very little overhead compared to direct static file serving and provides solid compression. Dynamic Compression is a little more tricky as it does add some overhead to servers, so it probably will require some tweaking to get the right balance of CPU load vs. compression ratios. Looking at large sites like Amazon, Yahoo, NewEgg etc. – they all use Related Content Code based ASP.NET GZip Caveats HttpWebRequest and GZip Responses © Rick Strahl, West Wind Technologies, 2005-2011Posted in IIS7   ASP.NET  

    Read the article

  • Setup Custom Portal & Content Enabled Domain

    - by Stefan Krantz
    When overlooking the past year we have seen a large increase in deployments where only some parts of the WebCenter Suite infrastructure has been used. The most common from my personal perspective is a domain topology that includes: WebCenter Custom Portal, WebCenter Content and Oracle HTTP ServicesToday its very common to see installation where the whole suite is installed when the use case only requires the custom portal and some sub component like WebCenter Content. This post will go into detail on how to minimize the deployment time and effort by only laying down the necessary managed servers needed, by following this proposed method you will minimize the configuration steps and only install the required components and schema's, configure only the necessary components and minimize the impact of architectural changes through reduced dependencies. Assumptions: Oracle 11g Database installed SYS or equivalent access to Database to setup schema's via RCU Running Operating System supporting JDK 7 Update 2 (Check support matrix here) Good understanding of WebLogic Architecture Binaries: Oracle JDK 7 Update 2 (1.7.0_02) (Download) Oracle WebLogic 10.3.6 (Download) Oracle WebCenter Binaries (11.1.1.6) (Download) Oracle WebCenter Content Binaries (11.1.1.6) (Download 1) (Download 2) Oracle HTTP Services (11.1.1.6) (Download) Oracle Repository Creation Utility (11.1.1.6) (Download Linux or Windows) Schema's: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} MDS - Meta Data Services (WebCenter and OWSM) WebCenter (WebCenter Schema) OCS (Oracle WebCenter Content) Activities (WebCenter Activities) OPSS (Policy Store for WebCenter) Installation Structure: - [Installation Home]/Middleware    - Oracle_WC1 (WebCenter Installation)    - Oracle_WT1 (Oracle WebTier)    - Oracle_ECM (WebCenter Content)    - wlserver_10.3 (Weblogic installation)- [Installation Home]/domains    - webcenter (WebCenter Domain)    - instances (OHS/OPMN instance)- [Installation Home]/applications- [Installation Home]/JDK1.7.0_02 Installation and Configuration Steps: Install Java and configure Java Home Extract the Java Installable (jdk-7u2-linux-x64) to [Installation Home]/JDK1.7.0_02 Add JAVA_HOME to Environment Settings (JAVA_HOME=[Installation Home]/JDK1.7.0_02) Update PATH in Environment Settings (PATH=$JAVA_HOME/bin:$PATH) Install WebLogic Server (Middleware Home) Run the installer / execute jar file (java - jar wls1036_generic.jar) Create the Middleware Home under [Installation Home]/Middleware Install WebCenter Portal (Extend Middleware Home) Extract the compressed file (ofm_wc_generic_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_WC1) Install WebCenter Content (Extend Middleware Home) Extract the compressed files (ofm_wcc_generic_11.1.1.6.0_disk1_1of2.zip & ofm_wcc_generic_11.1.1.6.0_disk1_2of2.zip) to the same temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller -jreLoc $JAVA_HOME) Make sure to install in following structure ([Installation Home]/Middleware/Oracle_ECM) Configure Initial Domain (Domain name webcenter) Execute configuration tool - [Installation Home]/Middleware/wlserver_10.3/common/bin/config Select "Create a New Weblogic Domain" Select following template (Basic Weblogic Server Domain, Oracle Enterprise Manager, Oracle WSM Policy Manager, Oracle JRF) Create new domain with name webcenter under following location ([Installation Home]/domains) for applications ([Installation Home]/applications) Select Production Mode Finish Configuration wizard Setup username for startup scripts - Add a new file called boot.properties to ([Installation Home]/domains/webcenter/servers/AdminServer/security)Add following lines to boot.propertiesusername=weblogicpassword=[password clear text, it will be encrypted during first start] Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Install and Configure Oracle WebTier (OHS Server) Extract compressed file (ofm_webtier_linux_11.1.1.6.0_64_disk1_1of1.zip) to a temp folder Execute runInstaller under folder (DISK1/) with following command (runInstaller) Select Install & Configure option Deselect Oracle WebCache Auto Configure Ports Configure Schema's with RCU (Repository Creation Utility) Extract compressed file (ofm_rcu_linux_11.1.1.6.0_disk1_1of1.zip) to a temp folder Execute rcu with following command ([temp]/rcuHome/rcu) Make sure database meets RCU requirements, particular (PROCESSES is 200 or more) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Using SQLPLUS and sys user tou can update this configuration in the database with following procedure:ALTER SYSTEM SET PROCESSES=200 SCOPE=SPFILE shutdown immediate startup Create and Configure following schemas:MDS - Meta Data Services (WebCenter and OWSM)WebCenter (WebCenter Schema)OCS (Oracle WebCenter Content)Activities (WebCenter Activities)OPSS (Policy Store for WebCenter) Remember selected schema prefix and password (will be used later) Configure WebCenter Portal instance (WC_CustomPortal) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_WC1/common/bin/config) Select Extend an Existing WebLogic domain Select the existing webcenter domain ([Installation Home]/domains/webcenter) Select Extend my domain using existing extension templateBrowse to ([Installation Home]/Middleware/Oracle_WC1/common/templates/applications)Select oracle.wc_custom_portal_template_11.1.1.jar Select to configure (Managed Servers/Clusters/Machines) On the Managed Server Screen you can now configure 1 or more WC_CustomPortal managed servers (name them WC_CustomPortal[n] (skip numbering if not clustered)) In case of two WC_CustomPortal Servers then create a Cluster (any name) and make sure the managed servers join the new cluster Create a new machine with same name as the current machine Make sure the AdminServer and WC_CustomPortal[n] managed servers joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start WC_CustomPortal in the foreground (([Installation Home]/domains/webcenter/bin/startManagedServer WC_CustomPortal))- repeat for each WC_CustomPortal instance on the host Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/) Result should be ([Installation Home]/domains/webcenter/servers/WC_CustomPortal/security/boot.properties) Configure WebCenter Content instance (UCM_server1) Execute following command to start configuration wizard ([Installation Home]/Middleware/Oracle_ECM/common/bin/config) Select Extend an Existing WebLogic domain Select Oracle Universal Content Management - Content Server Select to configure (Managed Servers/Clusters/Machines) On Managed Server Screen create only one managed server instance (UCM_server1 on port 16200 (you can select any other available port)) Make sure the UCM_server1 managed server joins the machine Finish the configuration wizard Stop AdminServer ([Installation Home]/domains/webcenter/bin/stopWeblogic) Start AdminServer in the background ([Installation Home]/domains/webcenter/bin/startWeblogic) Start UCM_server1 in the foreground ([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1)Give credentials for weblogic user on start up Copy folder security including file boot.properties - from ([Installation Home]/domains/webcenter/servers/AdminServer/) to ([Installation Home]/domains/webcenter/servers/UCM_server1/ Result should be ([Installation Home]/domains/webcenter/servers/UCM_server1/security/boot.properties) Post Configure WebCenter Content instance for WebCenter Portal Open a browser where you have support for Java applets - navigate to http://host:port/cs WARNING: The page that you are presented with after authentication will only appear once for each instance WARNING: Make sure you set correct storage options - also remember to consider file sharing options if you like to cluster your Content Server instance over multiple hosts Set an appropriate Auto number prefix Update the Server Socket Port: Commonly set to (4444)  used for RIDC communication (a requirement for WebCenter Portal) Update the IP Address Filter to include the IP that is planned to access the server over RIDC - at the minimum add the ip address of the current host (this option can be updated later via EM) Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Admin Server Go to General ConfigurationCheck Enable AccountsIn Additional Configuration Variables (Add on two lines) Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} AllowUpdateForGenwww=1CollectionUseCache=1 Save the changes and go to Component Manager Click on the link advanced component manager Enable following components Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Folders_g, WebCenterConfigure, SiteStudio, SiteStudioExternalApplications, DBSearchContainsOpSupport WARNING: Make sure that following component is disabled: FrameworkFolders Stop UCM_server1 ([Installation Home]/domains/webcenter/bin/stopManagedServer UCM_server1) Start UCM_server1 in the background([Installation Home]/domains/webcenter/bin/startManagedServer UCM_server1) Open a browser where you have support for Java applets - navigate to http://host:port/cs Navigate to Administration/Site Studio Administration and update - Do not forget to save and submit each page Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Set Default ProjectSet Default WebAssets Post Configure Oracle WebTier (OHS) to include Content Server and WebCenter Portal application context Update following file - [Installation Home]/domains/instances/instance1/config/OHS/ohs1/mod_wl_ohs.conf For single add lines from following example: Link For clustered environment add lines from following template (note the clustering in example on applies to WC_CustomPortal): Link For more information on this: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/contentsvr.htm#WCEDG318 Optional - Configure JOC Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} Follow instructions: http://docs.oracle.com/cd/E23943_01/core.1111/e12037/extend_wc.htm#WCEDG264 Optional (Recommended) - Configure Node Manager Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/core.1111/e12037/node_manager.htm#WCEDG277 Optional (Mandatory for clustered environments) - Re-Associate Policy Store to Database or OID Follow instructions: Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} http://docs.oracle.com/cd/E23943_01/webcenter.1111/e12405/wcadm_security_credstore.htm#CFHDEDJH Optional - Configure Coherence for Content Presenter Follow instructions in Blog Post (This post is for PS4): https://blogs.oracle.com/ATEAM_WEBCENTER/entry/enabling_coherence_for_content_presenter Other Recommended Post Cloning WebCenter Custom Portal - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/cloning_a_webcenter_portal_managedImproving WebCenter Performance through caching - https://blogs.oracle.com/ATEAM_WEBCENTER/entry/improving_webcenter_performance

    Read the article

  • SSL in tomcat with apr and Centos 6

    - by Jonathan
    I'm facing a problem setting up my tomcat with apr native lib, I have the following: Tomcat: 7.0.42 Java: 1.7.0_40-b43 OS: Centos 6.4 (2.6.32-358.18.1.el6.i686) APR: 1.3.9 Native lib: 1.1.27 OpenSSL: openssl-1.0.0-27.el6_4.2.i686 My server.xml looks like: ... <Listener className="org.apache.catalina.core.AprLifecycleListener" SSLEngine="on" /> ... <Connector port="8443" protocol="HTTP/1.1" SSLEnabled="true" maxThreads="150" scheme="https" secure="true" clientAuth="false" sslProtocol="TLS" SSLCertificateFile="/tmp/monitoringPortalCert.pem" SSLCertificateKeyFile="/tmp/monitoringPortalKey.pem" SSLPassword="hide" /> ... I compiled the native lib as follow: ./configure --with-apr=/usr/bin/apr-1-config --with-ssl=yes --prefix=$CATALINA_HOME make && make install The APR is loaded ok: Oct 06, 2013 7:55:14 PM org.apache.catalina.core.AprLifecycleListener init INFO: Loaded APR based Apache Tomcat Native library 1.1.27 using APR version 1.3.9. But I'm still having this error: SEVERE: Failed to initialize the SSLEngine. org.apache.tomcat.jni.Error: 70023: This function has not been implemented on this platform ./configure outcome [root@localhost native]# ./configure --with-apr=/usr/bin/apr-1-config --with-ssl=yes -- prefix=$CATALINA_HOME && make && make install checking build system type... i686-pc-linux-gnu checking host system type... i686-pc-linux-gnu checking target system type... i686-pc-linux-gnu checking for a BSD-compatible install... /usr/bin/install -c checking for working mkdir -p... yes Tomcat Native Version: 1.1.27 checking for chosen layout... tcnative checking for APR... yes setting CC to "gcc" setting CPP to "gcc -E" checking for JDK location (please wait)... /usr/java/jdk1.7.0_40 from environment checking Java platform... checking Java platform... checking for sablevm... NONE adding "-I/usr/java/jdk1.7.0_40/include" to TCNATIVE_PRIV_INCLUDES checking os_type directory... linux adding "-I/usr/java/jdk1.7.0_40/include/linux" to TCNATIVE_PRIV_INCLUDES checking for gcc... gcc checking whether the C compiler works... yes checking for C compiler default output file name... a.out checking for suffix of executables... checking whether we are cross compiling... no checking for suffix of object files... o checking whether we are using the GNU C compiler... yes checking whether gcc accepts -g... yes checking for gcc option to accept ISO C89... none needed checking for OpenSSL library... using openssl from /usr/lib and /usr/include checking OpenSSL library version... ok checking for OpenSSL DSA support... yes setting TCNATIVE_LDFLAGS to "-lssl -lcrypto" adding "-DHAVE_OPENSSL" to CFLAGS setting TCNATIVE_LIBS to "" setting TCNATIVE_LIBS to " /usr/lib/libapr-1.la -lpthread" configure: creating ./config.status config.status: creating tcnative.pc config.status: creating Makefile config.status: executing default commands make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' /usr/lib/apr-1/build/mkdir.sh /usr/apache-tomcat-7.0.42/include/apr-1 /usr/apache- tomcat-7.0.42/lib/pkgconfig \ /usr/apache-tomcat-7.0.42/lib /usr/apache-tomcat-7.0.42/bin /usr/bin/install -c -m 644 tcnative.pc /usr/apache-tomcat-7.0.42/lib/pkgconfig/tcnative- 1.pc list=''; for i in $list; do \ ( cd $i ; make DESTDIR= install ); \ done /bin/sh /usr/lib/apr-1/build/libtool --mode=install /usr/bin/install -c -m 755 libtcnative-1.la /usr/apache-tomcat-7.0.42/lib libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.so.0.1.27 /usr/apache- tomcat-7.0.42/lib/libtcnative-1.so.0.1.27 libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so.0 || { rm -f libtcnative-1.so.0 && ln -s libtcnative- 1.so.0.1.27 libtcnative-1.so.0; }; }) libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so || { rm -f libtcnative-1.so && ln -s libtcnative-1.so.0.1.27 libtcnative-1.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.lai /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.la libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.a /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.a libtool: install: chmod 644 /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: ranlib /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: warning: remember to run `libtool --finish /usr/local/apr/lib' make && make install outcome: make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Entering directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' make[1]: Nothing to be done for `local-all'. make[1]: Leaving directory `/usr/apache-tomcat-7.0.42/bin/tomcat-native-1.1.27- src/jni/native' /usr/lib/apr-1/build/mkdir.sh /usr/apache-tomcat-7.0.42/include/apr-1 /usr/apache- tomcat-7.0.42/lib/pkgconfig \ /usr/apache-tomcat-7.0.42/lib /usr/apache-tomcat-7.0.42/bin /usr/bin/install -c -m 644 tcnative.pc /usr/apache-tomcat-7.0.42/lib/pkgconfig/tcnative- 1.pc list=''; for i in $list; do \ ( cd $i ; make DESTDIR= install ); \ done /bin/sh /usr/lib/apr-1/build/libtool --mode=install /usr/bin/install -c -m 755 libtcnative-1.la /usr/apache-tomcat-7.0.42/lib libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.so.0.1.27 /usr/apache- tomcat-7.0.42/lib/libtcnative-1.so.0.1.27 libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so.0 || { rm -f libtcnative-1.so.0 && ln -s libtcnative- 1.so.0.1.27 libtcnative-1.so.0; }; }) libtool: install: (cd /usr/apache-tomcat-7.0.42/lib && { ln -s -f libtcnative- 1.so.0.1.27 libtcnative-1.so || { rm -f libtcnative-1.so && ln -s libtcnative-1.so.0.1.27 libtcnative-1.so; }; }) libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.lai /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.la libtool: install: /usr/bin/install -c -m 755 .libs/libtcnative-1.a /usr/apache-tomcat- 7.0.42/lib/libtcnative-1.a libtool: install: chmod 644 /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: ranlib /usr/apache-tomcat-7.0.42/lib/libtcnative-1.a libtool: install: warning: remember to run `libtool --finish /usr/local/apr/lib' It seems everything is fine, but the error is not self-explanatory Could you guys help to understand where my error is? What am I missing? Thanks in advance for your support.

    Read the article

  • Setting up a new Silverlight 4 Project with WCF RIA Services

    - by Kevin Grossnicklaus
    Many of my clients are actively using Silverlight 4 and RIA Services to build powerful line of business applications.  Getting things set up correctly is critical to being to being able to take full advantage of the RIA services plumbing and when developers struggle with the setup they tend to shy away from the solution as a whole.  I’m a big proponent of RIA services and wanted to take the opportunity to share some of my experiences in setting up these types of projects.  In late 2010 I presented a RIA Services Master Class here in St. Louis, MO through my firm (ArchitectNow) and the information shared in this post was promised during that presentation. One other thing I want to mention before diving in is the existence of a number of other great posts on this subject.  I’ve learned a lot from many of them and wanted to call out a few of them.  The purpose of my post is to point out some of the gotchas that people get caught up on in the process but I would still encourage you to do as much additional research as you can to find the perfect setup for your needs. Here are a few additional blog posts and articles you should check out on the subject: http://msdn.microsoft.com/en-us/library/ee707351(VS.91).aspx http://adam-thompson.com/post/2010/07/03/Getting-Started-with-WCF-RIA-Services-for-Silverlight-4.aspx Technologies I don’t intend for this post to turn into a full WCF RIA Services tutorial but I did want to point out what technologies we will be using: Visual Studio.NET 2010 Silverlight 4.0 WCF RIA Services for Visual Studio 2010 Entity Framework 4.0 I also wanted to point out that the screenshots came from my personal development box which has a number of additional plug-ins and frameworks loaded so a few of the screenshots might not match 100% with what you see on your own machines. If you do not have Visual Studio 2010 you can download the express version from http://www.microsoft.com/express.  The Silverlight 4.0 tools and the WCF RIA Services components are installed via the Web Platform Installer (http://www.microsoft.com/web/download). Also, the examples given in this post are done in C#…sorry to you VB folks but the concepts are 100% identical. Setting up anew RIA Services Project This section will provide a step-by-step walkthrough of setting up a new RIA services project using a shared DLL for server side code and a simple Entity Framework model for data access.  All projects are created with the consistent ArchitectNow.RIAServices filename prefix and default namespace.  This would be modified to match your companies standards. First, open Visual Studio and open the new project window via File->New->Project.  In the New Project window, select the Silverlight folder in the Installed Templates section on the left and select “Silverlight Application” as your project type.  Verify your solution name and location are set appropriately.  Note that the project name we specified in the example below ends with .Client.  This indicates the name which will be given to our Silverlight project. I consider Silverlight a client-side technology and thus use this name to reflect that.  Click Ok to continue. During the creation on a new Silverlight 4 project you will be prompted with the following dialog to create a new web ASP.NET web project to host your Silverlight content.  As we are demonstrating the setup of a WCF RIA Services infrastructure, make sure the “Enable WCF RIA Services” option is checked and click OK.  Obviously, there are some other options here which have an effect on your solution and you are welcome to look around.  For our example we are going to leave the ASP.NET Web Application Project selected.  If you are interested in having your Silverlight project hosted in an MVC 2 application or a Web Site project these options are available as well.  Also, whichever web project type you select, the name can be modified here as well.  Note that it defaults to the same name as your Silverlight project with the addition of a .Web suffix. At this point, your full Silverlight 4 project and host ASP.NET Web Application should be created and will now display in your Visual Studio solution explorer as part of a single Visual Studio solution as follows: Now we want to add our WCF RIA Services projects to this same solution.  To do so, right-click on the Solution node in the solution explorer and select Add->New Project.  In the New Project dialog again select the Silverlight folder under the Visual C# node on the left and, in the main area of the screen, select the WCF RIA Services Class Library project template as shown below.  Make sure your project name is set appropriately as well.  For the sample below, we will name the project “ArchitectNow.RIAServices.Server.Entities”.   The .Server.Entities suffix we use is meant to simply indicate that this particular project will contain our WCF RIA Services entity classes (as you will see below).  Click OK to continue. Once you have created the WCF RIA Services Class Library specified above, Visual Studio will automatically add TWO projects to your solution.  The first will be an project called .Server.Entities (using our naming conventions) and the other will have the same name with a .Web extension.  The full solution (with all 4 projects) is shown in the image below.  The .Entities project will essentially remain empty and is actually a Silverlight 4 class library that will contain generated RIA Services domain objects.  It will be referenced by our front-end Silverlight project and thus allow for simplified sharing of code between the client and the server.   The .Entities.Web project is a .NET 4.0 class library into which we will put our data access code (via Entity Framework).  This is our server side code and business logic and the RIA Services plumbing will maintain a link between this project and the front end.  Specific entities such as our domain objects and other code we set to be shared will be copied automatically into the .Entities project to be used in both the front end and the back end. At this point, we want to do a little cleanup of the projects in our solution and we will do so by deleting the “Class1.cs” class from both the .Entities project and the .Entities.Web project.  (Has anyone ever intentionally named a class “Class1”?) Next, we need to configure a few references to make RIA Services work.  THIS IS A KEY STEP THAT CAUSES MANY HEADACHES FOR DEVELOPERS NEW TO THIS INFRASTRUCTURE! Using the Add References dialog in Visual Studio, add a project reference from the *.Client project (our Silverlight 4 client) to the *.Entities project (our RIA Services class library).  Next, again using the Add References dialog in Visual Studio, add a project reference from the *.Client.Web project (our ASP.NET host project) to the *.Entities.Web project (our back-end data services DLL).  To get to the Add References dialog, simply right-click on the project you with to add a reference to in the Visual Studio solution explorer and select “Add Reference” from the resulting context menu.  You will want to make sure these references are added as “Project” references to simplify your future debugging.  To reiterate the reference direction using the project names we have utilized in this example thus far:  .Client references .Entities and .Client.Web reference .Entities.Web.  If you have opted for a different naming convention, then the Silverlight project must reference the RIA Services Silverlight class library and the ASP.NET host project must reference the server-side class library. Next, we are going to add a new Entity Framework data model to our data services project (.Entities.Web).  We will do this by right clicking on this project (ArchitectNow.Server.Entities.Web in the above diagram) and selecting Add->New Project.  In the New Project dialog we will select ADO.NET Entity Data Model as in the following diagram.  For now we will call this simply SampleDataModel.edmx and click OK. It is worth pointing out that WCF RIA Services is in no way tied to the Entity Framework as a means of accessing data and any data access technology is supported (as long as the server side implementation maps to the RIA Services pattern which is a topic beyond the scope of this post).  We are using EF to quickly demonstrate the RIA Services concepts and setup infrastructure, as such, I am not providing a database schema with this post but am instead connecting to a small sample database on my local machine.  The following diagram shows a simple EF Data Model with two tables that I reverse engineered from a local data store.   If you are putting together your own solution, feel free to reverse engineer a few tables from any local database to which you have access. At this point, once you have an EF data model generated as an EDMX into your .Entites.Web project YOU MUST BUILD YOUR SOLUTION.  I know it seems strange to call that out but it important that the solution be built at this point for the next step to be successful.  Obviously, if you have any build errors, these must be addressed at this point. At this point we will add a RIA Services Domain Service to our .Entities.Web project (our server side code).  We will need to right-click on the .Entities.Web project and select Add->New Item.  In the Add New Item dialog, select Domain Service Class and verify the name of your new Domain Service is correct (ours is called SampleService.cs in the image below).  Next, click "Add”. After clicking “Add” to include the Domain Service Class in the selected project, you will be presented with the following dialog.  In it, you can choose which entities from the selected EDMX to include in your services and if they should be allowed to be edited (i.e. inserted, updated, or deleted) via this service.  If the “Available DataContext/ObjectContext classes” dropdown is empty, this indicates you have not yes successfully built your project after adding your EDMX.  I would also recommend verifying that the “Generate associated classes for metadata” option is selected.  Once you have selected the appropriate options, click “OK”. Once you have added the domain service class to the .Entities.Web project, the resulting solution should look similar to the following: Note that in the solution you now have a SampleDataModel.edmx which represents your EF data mapping to your database and a SampleService.cs which will contain a large amount of generated RIA Services code which RIA Services utilizes to access this data from the Silverlight front-end.  You will put all your server side data access code and logic into the SampleService.cs class.  The SampleService.metadata.cs class is for decorating the generated domain objects with attributes from the System.ComponentModel.DataAnnotations namespace for validation purposes. FINAL AND KEY CONFIGURATION STEP!  One key step that causes significant headache to developers configuring RIA Services for the first time is the fact that, when we added the EDMX to the .Entities.Web project for our EF data access, a connection string was generated and placed within a newly generated App.Context file within that project.  While we didn’t point it out at the time you can see it in the image above.  This connection string will be required for the EF data model to successfully locate it’s data.  Also, when we added the Domain Service class to the .Entities.Web project, a number of RIA Services configuration options were added to the same App.Config file.   Unfortunately, when we ultimately begin to utilize the RIA Services infrastructure, our Silverlight UI will be making RIA services calls through the ASP.NET host project (i.e. .Client.Web).  This host project has a reference to the .Entities.Web project which actually contains the code so all will pass through correctly EXCEPT the fact that the host project will utilize it’s own Web.Config for any configuration settings.  For this reason we must now merge all the sections of the App.Config file in the .Entities.Web project into the Web.Config file in the .Client.Web project.  I know this is a bit tedious and I wish there were a simpler solution but it is required for our RIA Services Domain Service to be made available to the front end Silverlight project.  Much of this manual merge can be achieved by simply cutting and pasting from App.Config into Web.Config.  Unfortunately, the <system.webServer> section will exist in both and the contents of this section will need to be manually merged.  Fortunately, this is a step that needs to be taken only once per solution.  As you add additional data structures and Domain Services methods to the server no additional changes will be necessary to the Web.Config. Next Steps At this point, we have walked through the basic setup of a simple RIA services solution.  Unfortunately, there is still a lot to know about RIA services and we have not even begun to take advantage of the plumbing which we just configured (meaning we haven’t even made a single RIA services call).  I plan on posting a few more introductory posts over the next few weeks to take us to this step.  If you have any questions on the content in this post feel free to reach out to me via this Blog and I’ll gladly point you in (hopefully) the right direction. Resources Prior to closing out this post, I wanted to share a number or resources to help you get started with RIA services.  While I plan on posting more on the subject, I didn’t invent any of this stuff and wanted to give credit to the following areas for helping me put a lot of these pieces into place.   The books and online resources below will go a long way to making you extremely productive with RIA services in the shortest time possible.  The only thing required of you is the dedication to take advantage of the resources available. Books Pro Business Applications with Silverlight 4 http://www.amazon.com/Pro-Business-Applications-Silverlight-4/dp/1430272074/ref=sr_1_2?ie=UTF8&qid=1291048751&sr=8-2 Silverlight 4 in Action http://www.amazon.com/Silverlight-4-Action-Pete-Brown/dp/1935182374/ref=sr_1_1?ie=UTF8&qid=1291048751&sr=8-1 Pro Silverlight for the Enterprise (Books for Professionals by Professionals) http://www.amazon.com/Pro-Silverlight-Enterprise-Books-Professionals/dp/1430218673/ref=sr_1_3?ie=UTF8&qid=1291048751&sr=8-3 Web Content RIA Services http://channel9.msdn.com/Blogs/RobBagby/NET-RIA-Services-in-5-Minutes http://silverlight.net/riaservices/ http://www.silverlight.net/learn/videos/all/net-ria-services-intro/ http://www.silverlight.net/learn/videos/all/ria-services-support-visual-studio-2010/ http://channel9.msdn.com/learn/courses/Silverlight4/SL4BusinessModule2/SL4LOB_02_01_RIAServices http://www.myvbprof.com/MainSite/index.aspx#/zSL4_RIA_01 http://channel9.msdn.com/blogs/egibson/silverlight-firestarter-ria-services http://msdn.microsoft.com/en-us/library/ee707336%28v=VS.91%29.aspx Silverlight www.silverlight.net http://msdn.microsoft.com/en-us/silverlight4trainingcourse.aspx http://channel9.msdn.com/shows/silverlighttv

    Read the article

  • CodePlex Daily Summary for Monday, December 06, 2010

    CodePlex Daily Summary for Monday, December 06, 2010Popular ReleasesAura: Aura Preview 1: Rewritten from scratch. This release supports getting color only from icon of foreground window.myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.3 Beta: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Moved menu management and keyboard navigation code to the new PopupMenuManager class - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ...SubtitleTools: SubtitleTools 1.0: First public releaseMiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????Phalanger - The PHP Language Compiler for the .NET Framework: 2.0 (December 2010): The release is targetted for stable daily use. With improved performance and enhanced compatibility with several latest PHP open source applications; it makes this release perfect replacement of your old PHP runtime. Changes made within this release include following and much more: Performance improvements based on real-world applications experience. We determined biggest bottlenecks and we found and removed overheads causing performance problems in many PHP applications. Reimplemented nat...Chronos WPF: Chronos v2.0 Beta 3: Release notes: Updated introduction document. Updated Visual Studio 2010 Extension (vsix) package. Added horizontal scrolling to the main window TaskBar. Added new styles for ListView, ListViewItem, GridViewColumnHeader, ... Added a new WindowViewModel class (allowing to fetch data). Added a new Navigate method (with several overloads) to the NavigationViewModel class (protected). Reimplemented Task usage for the WorkspaceViewModel.OnDelete method. Removed the reflection effect...MDownloader: MDownloader-0.15.26.7024: Fixed updater; Fixed MegauploadDJ - jQuery WebControls for ASP.NET: DJ 1.2: What is new? Update to support jQuery 1.4.2 Update to support jQuery ui 1.8.6 Update to Visual Studio 2010 New WebControls with samples added Autocomplete WebControl Button WebControl ToggleButt WebControl The example web site is including in source code project.LateBindingApi.Excel: LateBindingApi.Excel Release 0.7g: Unterschiede zur Vorgängerversion: - Zusätzliche Interior Properties - Group / Ungroup Methoden für Range - Bugfix COM Reference Handling für Application Objekt in einigen Klassen Release+Samples V0.7g: - Enthält Laufzeit DLL und Beispielprojekte Beispielprojekte: COMAddinExample - Demonstriert ein versionslos angebundenes COMAddin Example01 - Background Colors und Borders für Cells Example02 - Font Attributes undAlignment für Cells Example03 - Numberformats Example04 - Shapes, WordArts, P...ESRI ArcGIS Silverlight Toolkit: November 2010 - v2.1: ESRI ArcGIS Silverlight Toolkit v2.1 Added Windows Phone 7 build. New controls added: InfoWindow ChildPage (Windows Phone 7 only) See what's new here full details for : http://help.arcgis.com/en/webapi/silverlight/help/#/What_s_new_in_2_1/016600000025000000/ Note: Requires Visual Studio 2010, .NET 4.0 and Silverlight 4.0.ASP .NET MVC CMS (Content Management System): Atomic CMS 2.1.1: Atomic CMS 2.1.1 release notes Atomic CMS installation guide Free Silverlight & WPF Chart Control - Visifire: Visifire SL and WPF Charts v3.6.5 beta Released: Hi, Today we are releasing Visifire 3.6.5 beta with the following new feature: New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. Also this release includes few bug fixes: AxisXLabel label were getting clipped if angle was set for AxisLabels and ScrollingEnabled was not set in Chart. If LabelStyle property was set as 'Inside', size of the Pie was not proper. Yo...EnhSim: EnhSim 2.1.1: 2.1.1This release adds in the changes for 4.03a. To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Switched Searing Flames bac...AI: Initial 0.0.1: It’s simply just one code file; it simulates AI and machine in a simulated world. The AI has a little understanding of its body machine and parts, and able to use its feet to do actions just start and stop walking. The world is all of white with nothing but just the machine on a white planet. Colors, odors and position information make no sense. I’m previous C# programmer and I’m learning F# during this project, although I’m still not a good F# programmer, in this project I learning to prog...NKinect: NKinect Preview: Build features: Accelerometer reading Motor serial number property Realtime image update Realtime depth calculation Export to PLY (On demand) Control motor LED Control Kinect tiltMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample (Microsoft Spain): V1.0 - N-Layer DDD Sample App .NET 4.0: Required Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power Tools http://re...Sense/Net Enterprise Portal & ECMS: SenseNet 6.0.1 Community Edition: Sense/Net 6.0.1 Community Edition This half year we have been working quite fiercely to bring you the long-awaited release of Sense/Net 6.0. Download this Community Edition to see what we have been up to. These months we have worked on getting the WebCMS capabilities of Sense/Net 6.0 up to par. New features include: New, powerful page and portlet editing experience. HTML and CSS cleanup, new, powerful site skinning system. Upgraded, lightning-fast indexing and query via Lucene. Limita...Minecraft GPS: Minecraft GPS 1.1.1: New Features Compass! New style. Set opacity on main window to allow overlay of Minecraft. Open World in any folder. Fixes Fixed style so listbox won't grow the window size. Fixed open file dialog issue on non-vista kernel machines.New ProjectsAboutTime: The AboutTime WPF controls project is aimed at developing custom controls that relate to time.aReader: aReader is a free software, it's used as an XPS document reader. It's developed in C# Language and use Windows Presentation Foundation technology with .NET Framework 3.5. Mixed with Ribbon Controls Library for GUI (Graphic User Interface) make this application user friendly.Battle Net Info: Battle Net Info provides information of the StarCraft2 player from his profile pageBencoder: Library for encode/decode bencode file or string. It's developing on C#.BiBongNet: BiBongNet Project.Binhnt: BinhntC++ Bloom Filter Library: C++ Bloom Filter LibraryChild Sponsorship Manager: Sponsorship Manager is developed for a NPO that provides child sponsorship in developing countries. It is possible to track sponsor child relations, gifts and payments. It is developed in visual basic . netDocBlogger: This is a tool for automatically converting existing XML comments from your project into MSDN style HTML for posting to the codeplex site. This will use the MetaBlog API to post code, but can be used in a copy paste fashion right away.Dynamic Rdlc WebControl: "Dynamic Rdlc WebControl" is an ASP .NET WebControl to generate dynamic reports in RDLC format without generate physical files. Suports groups and totalizers. It is developed with Microsoft Visual Studio 2010, ASP .NET and C# 4.Fake Call for Windows Phone 7: Coding4Fun Windows Phone 7 fake call applicationFlow launcher: Flow is the worlds fastest application launcher, using an onscreen keyboard and mnemonics to achieve lightning fast shortcut launching.GaDotNet: GaDotNet is an open source library designed to make it easy to log page views, events and transactions, through c# code, without using JavaScript or even needing to have a browser.HackerNews for WP7: HackerNews is a WP7 client for the HackerNews website.How much is this meeting costing us?: Coding4Fun Windows Phone 7 "How much is this meeting costing us?" applicationKLAB: KLABMap Navigator: Map Navigator - it's a silverlight application intended to work with maps.MNRT: MNRT implements (demonstrates) several techniques to realize fast global illumination for dynamic scenes on Graphics Processing Units (GPUs) using CUDA. A GPU-based kd-tree was implemented to accelerate both ray tracing and photon mapping.MVC Helpers: MVC Helper makes developing views easier. It contains extended helpers classes to render view content. It is developed in C#.Net Extended Helpers for Grid has been created so far. MVCPets: This is a projected dedicated to providing a free platform to be used by animal rescue organizations. The hope is that this project can fill the void for those rescue groups that can't afford to pay a professional web designer/developer.MyGraphicProgram: ???????????????NAI: This project is a step by step illustration of some Numerical Analysis methods.Nemono: Nemono is an application that runs in the background, and is activated by pressing a key combination like ALT+W. When activated, Nemono uses context awareness to present relevant shortcuts to the user, and mnemonics to execute shortcuts.opojo: opojoOxyPlot: OxyPlot is a .NET library for making XY line plots. The focus is on simplicity and performance. The library contains custom controls for WPF and Windows Forms. The plots can also be exported to SVG, PDF and PNG.PowerChumby: PowerChumby is a Perl CGI script and a PowerShell module that gives you a PowerShell way of controlling your Chumby.RHoK Berlin Visio Projekt: Random Hacks of Kindness - Berlin Projekt für die Senatsverwaltung für Gesundheit, Umwelt und Verbraucherschutz Query, integrate and display external data in Microsoft Visio. It's developed in C#.sc2md: starcraft.md news portalSlide Show: Coding4Fun Windows Phone 7 Slide Show applicationsmartcon: smart control centerTFS Fav source: Favourites for source location in VSTwitter Followers Monitor: Free and Open Source tool that will let you monitor any Twitter account for its new & lost followers even if it's not yours and you don't have its credentials. It allows you to add several Twitter accounts and be updated right from your desktop.

    Read the article

  • Configure Forms based authentication in SharePoint 2010

    - by sreejukg
      Configuring form authentication is a straight forward task in SharePoint. Mostly public facing websites built on SharePoint requires form based authentication. Recently, one of the WCM implementation where I was included in the project team required registration system. Any internet user can register to the site and the site offering them some membership specific functionalities once the user logged in. Since the registration open for all, I don’t want to store all those users in Active Directory. I have decided to use Forms based authentication for those users. This is a typical scenario of form authentication in SharePoint implementation. To implement form authentication you require the following A data store where you are storing the users – technically this can be active directory, SQL server database, LDAP etc. Form authentication will redirect the user to the login page, if the request is not authenticated. In the login page, there will be controls that validate the user inputs against the configured data store. In this article, I am going to use SQL server database with ASP.Net membership API’s to configure form based authentication in SharePoint 2010. This article assumes that you have SQL membership database available. I already configured the membership and roles database using aspnet_regsql command. If you want to know how to configure membership database using aspnet_regsql command, read the below blog post. http://weblogs.asp.net/sreejukg/archive/2011/06/16/usage-of-aspnet-regsql-exe-in-asp-net-4.aspx The snapshot of the database after implementing membership and role manager is as follows. I have used the database name “aspnetdb_claim”. Make sure you have created the database and make sure your database contains tables and stored procedures for membership. Create a web application with claims based authentication. This article assumes you already created a web application using claims based authentication. If you want to enable forms based authentication in SharePoint 2010, you must enable claims based authentication. Read this post for creating a web application using claims based authentication. http://weblogs.asp.net/sreejukg/archive/2011/06/15/create-a-web-application-in-sharepoint-2010-using-claims-based-authentication.aspx  You make sure, you have selected enable form authentication, and then selected Membership provider and Role manager name. To make sure you are done with the configuration, navigate to central administration website, from central administration, navigate to the Web Applications page, select the web application and click on icon, you will see the authentication providers for the current web application. Go to the section Claims authentication types, and make sure you have enabled forms based authentication. As mentioned in the snapshot, I have named the membership provider as SPFormAuthMembership and role manager as SPFormAuthRoleManager. You can choose your own names as you need. Modify the configuration files(Web.Config) to enable form authentication There are three applications that needs to be configured to support form authentication. The following are those applications. Central Administration If you want to assign permissions to web application using the credentials from form authentication, you need to update Central Administration configuration. If you do not want to access form authentication credentials from Central Administration, just leave this step.  STS service application Security Token service is the service application that issues security token when users are logging in. You need to modify the configuration of STS application to make sure users are able to login. To find the STS application, follow the following steps Go to the IIS Manager Expand the sites Node, you will see SharePoint Web Services Expand SharePoint Web Services, you can see SecurityTokenServiceApplication Right click SecuritytokenServiceApplication and click explore, it will open the corresponding file system. By default, the path for STS is C:\Program Files\Common Files\Microsoft Shared\Web Server Extensions\14\WebServices\SecurityToken You need to modify the configuration file available in the mentioned location. The web application that needs to be enabled with form authentication. You need to modify the configuration of your web application to make sure your web application identifies users from the form authentication.   Based on the above, I am going to modify the web configuration. At end of each step, I have mentioned the expected output. I recommend you to go step by step and after each step, make sure the configuration changes are working as expected. If you do everything all together, and test your application at the end, you may face difficulties in troubleshooting the configuration errors. Modifications for Central Administration Web.Config Open the web.config for the Central administration in a text editor. I always prefer Visual Studio, for editing web.config. In most cases, the path of the web.config for the central administration website is as follows C:\inetpub\wwwroot\wss\VirtualDirectories\<port number> Make sure you keep a backup copy of the web.config, before editing it. Let me summarize what we are going to do with Central Administration web.config. First I am going to add a connection string that points to the form authentication database, that I created as mentioned in previous steps. Then I need to add a membership provider and a role manager with the corresponding connectionstring. Then I need to update the peoplepickerwildcards section to make sure the users are appearing in search results. By default there is no connection string available in the web.config of Central Administration. Add a connection string just after the configsections element. The below is the connection string I have used all over the article. <add name="FormAuthConnString" connectionString="Initial Catalog=yourdatabasename;data source=databaseservername;Integrated Security=SSPI;" /> Once you added the connection string, the web.config look similar to Now add membership provider to the code. In web.config for CA, there will be <membership> tag, search for it. You will find membership and role manager under the <system.web> element. Under the membership providers section add the below code… <add name="SPFormAuthMembership" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> After adding memberhip element, see the snapshot of the web.config. Now you need to add role manager element to the web.config. Insider providers element under rolemanager, add the below code. <add name="SPFormAuthRoleManager" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> After adding, your role manager will look similar to the following. As a last step, you need to update the people picker wildcard element in web.config, so that the users from your membership provider are available for browsing in Central Administration. Search for PeoplePickerWildcards in the web.config, add the following inside the <PeoplePickerWildcards> tag. <add key="SPFormAuthMembership" value="%" /> After adding this element, your web.config will look like After completing these steps, you can browse the users available in the SQL server database from central administration website. Go to the site collection administrator’s page from central administration. Select the site collection you have created for form authentication. Click on the people picker icon, choose Forms Auth and click on the search icon, you will see the users listed from the SQL server database. Once you complete these steps, make sure the users are available for browsing from central administration website. If you are unable to find the users, there must be some errors in the configuration, check windows event logs to find related errors and fix them. Change the web.config for STS application Open the web.config for STS application in text editor. By default, STS web.config does not have system.Web or connectionstrings section. Just after the System.Webserver element, add the following code. <connectionStrings> <add name="FormAuthConnString" connectionString="Initial Catalog=aspnetdb_claim;data source=sp2010_db;Integrated Security=SSPI;" /> </connectionStrings> <system.web> <roleManager enabled="true" cacheRolesInCookie="false" cookieName=".ASPXROLES" cookieTimeout="30" cookiePath="/" cookieRequireSSL="false" cookieSlidingExpiration="true" cookieProtection="All" createPersistentCookie="false" maxCachedResults="25"> <providers> <add name="SPFormAuthRoleManager" type="System.Web.Security.SqlRoleProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> </providers> </roleManager> <membership userIsOnlineTimeWindow="15" hashAlgorithmType=""> <providers> <add name="SPFormAuthMembership" type="System.Web.Security.SqlMembershipProvider, System.Web, Version=2.0.0.0, Culture=neutral, PublicKeyToken=b03f5f7f11d50a3a" applicationName="FormAuthApplication" connectionStringName="FormAuthConnString" /> </providers> </membership> </system.web> See the snapshot of the web.config after adding the required elements. After adding this, you should be able to login using the credentials from SQL server. Try assigning a user as primary/secondary administrator for your site collection from Central Administration and login to your site using form authentication. If you made everything correct, you should be able to login. This means you have successfully completed configuration of STS Configuration of Web Application for Form Authentication As a last step, you need to modify the web.config of the form authentication web application. Once you have done this, you should be able to grant permissions to users stored in the membership database. Open the Web.config of the web application you created for form authentication. You can find the web.config for the application under the path C:\inetpub\wwwroot\wss\VirtualDirectories\<port number> Basically you need to add connection string, membership provider, role manager and update the people picker wild card configuration. Add the connection string (same as the one you added to the web.config in Central Administration). See the screenshot after the connection string has added. Search for <membership> in the web.config, you will find this inside system.web element. There will be other providers already available there. You add your form authentication membership provider (similar to the one added to Central Administration web.config) to the provider element under membership. Find the snapshot of membership configuration as follows. Search for <roleManager> element in web.config, add the new provider name under providers section of the roleManager element. See the snapshot of web.config after new provider added. Now you need to configure the peoplepickerwildcard configuration in web.config. As I specified earlier, this is to make sure, you can locate the users by entering a part of their username. Add the following line under the <PeoplePickerWildcards> element in web.config. See the screenshot of the peoplePickerWildcards element after the element has been added. Now you have completed all the setup for form authentication. Navigate to the web application. From the site actions -> site settings -> go to peope and groups Click on new -> add users, it will popup the people picker dialog. Click on the icon, select Form Auth, enter a username in the search textbox, and click on search icon. See the screenshot of admin search when I tried searching the users If it displays the user, it means you are done with the configuration. If you add users to the form authentication database, the users will be able to access SharePoint portal as normal.

    Read the article

  • CodePlex Daily Summary for Tuesday, February 08, 2011

    CodePlex Daily Summary for Tuesday, February 08, 2011Popular ReleasesyoutubeFisher: youtubeFisher 3.0 [beta]: What's new: Supports YouTube's new layout Complete internal refactoringNearforums - ASP.NET MVC forum engine: Nearforums v5.0: Version 5.0 of the ASP.NET MVC Forum Engine, containing the following improvements: .NET 4.0 as target framework using ASP.NET MVC 3. All views migrated to Razor for cleaner markup. Alternate template (Layout file) for mobile devices 4 Bug Fixes since Version 4.1 Visit the project Roadmap for more details.fuv: 1.0 release, codename Chopper Joe: features: search/replace :o to open file :s to save file :q to quitASP.NET MVC Project Awesome, jQuery Ajax helpers (controls): 1.7: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager html generation optimized new features for the lookup (add additional search data ) live demo went aeroEnhSim: EnhSim 2.3.6 BETA: 2.3.6 BETAThis release supports WoW patch 4.06 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 Changes since 2.3.0 ...TestApi - a library of Test APIs: TestApi v0.6: TestApi v0.6 comes with the following changes: TestApi code development has been moved to Codeplex: Moved TestApi soluton to VS 2010; Moved all source code to Codeplex. All development work is done there now. Fault Injection API: Integrated the unmanaged FaultInjectionEngine.dll COM component in the build; Cleaned up FaultInjectionEngine.dll to build at warning level 4; Implemented “FaultScope” which allows for in-process fault injection; Added automation scripts & sample program; ...AutoLoL: AutoLoL v1.5.5: AutoChat now allows up to 6 items. Items with nr. 7-0 will be removed! News page url's are now opened in the default browser Added a context menu to the system tray icon (thanks to Alex Banagos) AutoChat now allows configuring the Chat Keys and the Modifier Key The recent files list now supports compact and full mode Fix: Swapped mouse buttons are now properly detected Fix: Sometimes the Play button was pressed while still greyed out Champion: Karma Note: You can also run the u...mojoPortal: 2.3.6.2: see release notes on mojoportal.com http://www.mojoportal.com/mojoportal-2362-released.aspx Note that we have separate deployment packages for .NET 3.5 and .NET 4.0 The deployment package downloads on this page are pre-compiled and ready for production deployment, they contain no C# source code. To download the source code see the Source Code Tab I recommend getting the latest source code using TortoiseHG, you can get the source code corresponding to this release here.Rawr: Rawr 4.0.19 Beta: Rawr is now web-based. The link to use Rawr4 is: http://elitistjerks.com/rawr.phpThis is the Cataclysm Beta Release. More details can be found at the following link http://rawr.codeplex.com/Thread/View.aspx?ThreadId=237262 As of the 4.0.16 release, you can now also begin using the new Downloadable WPF version of Rawr!This is a pre-alpha release of the WPF version, there are likely to be a lot of issues. If you have a problem, please follow the Posting Guidelines and put it into the Issue Trac...IronRuby: 1.1.2: IronRuby 1.1.2 is a servicing release that keeps on improving compatibility with Ruby 1.9.2 and includes IronRuby integration to Visual Studio 2010. We decided to drop 1.8.6 compatibility mode in all post-1.0 releases. We recommend using IronRuby 1.0 if you need 1.8.6 compatibility. In this release we fixed several major issues: - problems that blocked Gem installation in certain cases - regex syntax: the parser was replaced with a new one that is much more compatible with Ruby 1.9.2 - cras...Pyxis 2: Production Release: Pyxis 2.0.0.13 - Full Production Release This release of Pyxis 2 offers you a wide range of features: Launch Applications in their own threads & domains Render alpha-blended icons on the desktop Support for SD & USB drives Online App Store Dynamic & Static IP support Menus & Modals Over a dozen GUI controls File selection dialogs Folder selection dialog Application, Bootloader, and Firmware Updating Update Release Notes Much More!Microsoft All-In-One Code Framework: Sample Browser v2 (CTP Release): Sample Browser v2 (CTP Release) http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=205917MVVM Light Toolkit: MVVM Light Toolkit V3 SP1 (4): There was a small issue with the previous release that caused errors when installing the templates in VS10 Express. This release corrects the error. Only use this if you encountered issues when installing the previous release. No changes in the binaries.Finestra Virtual Desktops: 1.0: Finally the version 1.0 release! Sorry for the long delay since the last release, but I think that you'll find this release to be really smooth, really stable, and a really great enhancement to Windows. New features include: Windows 7 taskbar integration Major performance and usability improvements Redesigned look and feel New name: Finestra Better automatic updating Much faster full-screen switcher Fixes Windows 7 hotkey collisions by default Updated installerFacebook C# SDK: 5.0.2 (BETA): PLEASE TAKE A FEW MINUTES TO GIVE US SOME FEEDBACK: Facebook C# SDK Survey This is third BETA release of the version 5 branch of the Facebook C# SDK. Remember this is a BETA build. Some things may change or not work exactly as planned. We are absolutely looking for feedback on this release to help us improve the final 5.X.X release. This release contains some breaking changes. Particularly with authentication. After spending time reviewing the trouble areas that people are having using th...ASP.NET MVC SiteMap provider: MvcSiteMapProvider 3.0.0 for MVC3: Using NuGet?MvcSiteMapProvider is also listed in the NuGet feed. Learn more... Like the project? Consider a donation!Donate via PayPal via PayPal. ChangelogTargeting ASP.NET MVC 3 and .NET 4.0 Additional UpdatePriority options for generating XML sitemaps Allow to specify target on SiteMapTitleAttribute One action with multiple routes and breadcrumbs Medium Trust optimizations Create SiteMapTitleAttribute for setting parent title IntelliSense for your sitemap with MvcSiteMapSchem...patterns & practices SharePoint Guidance: SharePoint Guidance 2010 Hands On Lab: SharePoint Guidance 2010 Hands On Lab consists of six labs: one for logging, one for service location, and four for application setting manager. Each lab takes about 20 minutes to walk through. Each lab consists of a PDF document. You can go through the steps in the doc to create solution and then build/deploy the solution and run the lab. For those of you who wants to save the time, we included the final solution so you can just build/deploy the solution and run the lab.Value Injecter - object(s) to -> object mapper: 2.3: it lets you define your own convention-based matching algorithms (ValueInjections) in order to match up (inject) source values to destination values. inject from multiple sources in one InjectFrom added ConventionInjectionMobile Device Detection and Redirection: 0.1.11.11: Improvements to Beta Release The following changes have been made in version 0.1.11.11: BlackBerry Version 6 devices (such as the 9800 Torch) are now correctly identified with a dedicated handler. Android powered devices are now correctly identified. Minor change to Provider.cs to improve performance and optimise data sent to 51Degrees.mobi if the option is enabled. GC.collect is no longer called at any point. All garbage collection now happens automatically IMPORTANT CHANGES This rele...TweetSharp: TweetSharp v2.0.0.0 - Preview 10: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 9 ChangesAdded support for trends Added support for Silverlight 4 Elevated WP7 fixes Third Party Library VersionsHammock v1.1.7: http://hammock.codeplex.com Json.NET 4.0 Release 1: http://json.codeplex.comNew Projectsbisolu_sendus: bisolu smsBlack & Scholes: Black & Scholes OptionsCosLabs: CosLabs makes it easy to see the full capabilities of the Cosmos operating system toolkit. CosLabs has a number of experiments to find new and unique uses for Cosmos. It's developed in C#.DeployToAzure: DeployToAzure allows automating deployment of Windows Azure project and making it a part of TFS 2010 build process without using PowerShell and Azure Management CmdLets. Digital: Educational purposesDiscogsNet: DiscogsNet is a .NET library to query the Discogs.com API and parse the Discogs XML data dump files. It's developed in C# and usable from any .NET language. The API of the library is focused on ease of use and intuitiveness.DJME - The jQuery extensions for ASP.NET MVC: DJME - The jQuery extensions for ASP.NET MVC is a lightweight framework which helps you build rich user interfaces for ASP.NET MVC while enjoying great developer productivity. DokuDB: Visio AddIn to document different versions of a databaseDtsConfig Explorer: This project is a windows froms application that helps explore a SSIS dtsconfig file with an easy wayEveryDNS Service: Windows service to automatically send your current IP address to everydns.net for dynamic domains. Automatically monitors and sends IP address changes without having to be logged in. The project is built in C# targeting the .NET 4.0 framework.EvoSim - Evolution Simulation: EvoSim is a pet project to learn aspects of MVVM, WPF/Silverlight, and Parallel Processing features of .NET 4. The goal is to simulate a world filled with creatures that move, eat, reproduce, and die according to Darwinian evolutionary principles. It is tile and turn based.EZStorage: A storage library for XNA based on EasyStorage but abstracting in an XML based file list for each folder, allowing file listings on all folders and details like file creation dates which are no longer possible in XNA 4.0ForeverBell's Snake: A snake game written in VB.NET.Glauca Browser: This is a browser with a webkit core inside.Grauers SharePoint 2010 Custom MasterPage Feature: This is a SharePoint 2010 Custom MastePage feature. Custom Master and custom CSS Blog post about the project: http://www.grauers.net/archive/2011/02/07/build-a-sharepoint-2010-custom-mastepage-with-visual-studio-2010.aspxHamming Code Sample: HamCode demonstrate how the hamming code work, result of coded and decoded data. Shows the benefits of hamming method/codeHydroDesktop Mercurial Test: This is a trial version of the HydroDesktop project (hydrodesktop.codeplex.com) running on Mercurial source code repository. We first want to test whether the data update/download is happening fine before switching the official HydroDesktop website to the new system.LateBindingApi: Creates .Net Proxy Components from COM Type Libraries.Middlesex County College Library Wireless Auto Login: The Middlesex County College Library Wireless Auto Login automatically logs a computer in to the Middlesex County College (Edison, NJ) Library's WifiMobility: Mobility is a small program that reads from a text file. The text file includes everything about the program, right down to that cute little bunny on your desktop! Try Mobility today!OpenMFC: OpenMFC is opensource version of MFC for using with C/C++ compiler without MFC.Orchard Content Sharing: This Orchard module adds content sharing functionality via integration with AddThis.com sharing service.Orchard Wunder Weather Widget: This project is used to maintain the source code for the Wunder Weather widget in the Orchard gallery.Professional Audio Recorder: Professional Audio Recorder is a Audio Recorder for Windows Phone 7Python Node Info for Umbraco: Designed to assist Umbraco macro authors who are writing their macros in Python. Provides a helper macro that, when inserted into a page, will enable the display of an info panel showing the page node properties as represented in Python.Softina.Graphs: Softina.Graphs is a graph managment and algorithm utility. It includes a set of libraries to work with graph processing. It is written using .net framework with c# language and MS Visual Studio 2008. Client applications is created using devexpress components.spangesharp: Application to help people learn c#Visual Studio Private Extension Gallery: Add a new tab in the Visual Studio extension manager to manage private extensions.WCF Home Framework: Home Framework is a service-oriented framework able to facilitate deploy and management of wcf services in a mid-size scenario project.Windows Phone 7 Video Player: This project contains all the source of an application for Windows Phone 7 to consume an RSS Media exposed by our Smooth Streaming Video Player plugin for WordPress (http://smooth.codeplex.com).WOL Shopping List: This is a shoppingList version of WOL's NearMeWP7RSSReader: Updated RSSReader project for Windows Phone 7 using the RTM tools with the October 2010 update.Xen (XNA Extended) Framework: The Xen Framework is a set of libraries that provides and extends XNA 4.0 functionality to make game development easier and faster while producing clean, maintainable code. Xen frees you up to spend more time building your game.

    Read the article

  • 10 Essential Tools for building ASP.NET Websites

    - by Stephen Walther
    I recently put together a simple public website created with ASP.NET for my company at Superexpert.com. I was surprised by the number of free tools that I ended up using to put together the website. Therefore, I thought it would be interesting to create a list of essential tools for building ASP.NET websites. These tools work equally well with both ASP.NET Web Forms and ASP.NET MVC. Performance Tools After reading Steve Souders two (very excellent) books on front-end website performance High Performance Web Sites and Even Faster Web Sites, I have been super sensitive to front-end website performance. According to Souders’ Performance Golden Rule: “Optimize front-end performance first, that's where 80% or more of the end-user response time is spent” You can use the tools below to reduce the size of the images, JavaScript files, and CSS files used by an ASP.NET application. 1. Sprite and Image Optimization Framework CSS sprites were first described in an article written for A List Apart entitled CSS sprites: Image Slicing’s Kiss of Death. When you use sprites, you combine multiple images used by a website into a single image. Next, you use CSS trickery to display particular sub-images from the combined image in a webpage. The primary advantage of sprites is that they reduce the number of requests required to display a webpage. Requesting a single large image is faster than requesting multiple small images. In general, the more resources – images, JavaScript files, CSS files – that must be moved across the wire, the slower your website. However, most people avoid using sprites because they require a lot of work. You need to combine all of the images and write just the right CSS rules to display the sub-images. The Microsoft Sprite and Image Optimization Framework enables you to avoid all of this work. The framework combines the images for you automatically. Furthermore, the framework includes an ASP.NET Web Forms control and an ASP.NET MVC helper that makes it easy to display the sub-images. You can download the Sprite and Image Optimization Framework from CodePlex at http://aspnet.codeplex.com/releases/view/50869. The Sprite and Image Optimization Framework was written by Morgan McClean who worked in the office next to mine at Microsoft. Morgan was a scary smart Intern from Canada and we discussed the Framework while he was building it (I was really excited to learn that he was working on it). Morgan added some great advanced features to this framework. For example, the Sprite and Image Optimization Framework supports something called image inlining. When you use image inlining, the actual image is stored in the CSS file. Here’s an example of what image inlining looks like: .Home_StephenWalther_small-jpg { width:75px; height:100px; background: url(data:image/png;base64,iVBORw0KGgoAAAANSUhEUgAAAEsAAABkCAIAAABB1lpeAAAAB GdBTUEAALGOfPtRkwAAACBjSFJNAACHDwAAjA8AAP1SAACBQAAAfXkAAOmLAAA85QAAGcxzPIV3AAAKL s+zNfREAAAAASUVORK5CYII=) no-repeat 0% 0%; } The actual image (in this case a picture of me that is displayed on the home page of the Superexpert.com website) is stored in the CSS file. If you visit the Superexpert.com website then very few separate images are downloaded. For example, all of the images with a red border in the screenshot below take advantage of CSS sprites: Unfortunately, there are some significant Gotchas that you need to be aware of when using the Sprite and Image Optimization Framework. There are workarounds for these Gotchas. I plan to write about these Gotchas and workarounds in a future blog entry. 2. Microsoft Ajax Minifier Whenever possible you should combine, minify, compress, and cache with a far future header all of your JavaScript and CSS files. The Microsoft Ajax Minifier makes it easy to minify JavaScript and CSS files. Don’t confuse minification and compression. You need to do both. According to Souders, you can reduce the size of a JavaScript file by an additional 20% (on average) by minifying a JavaScript file after you compress the file. When you minify a JavaScript or CSS file, you use various tricks to reduce the size of the file before you compress the file. For example, you can minify a JavaScript file by replacing long JavaScript variables names with short variables names and removing unnecessary white space and comments. You can minify a CSS file by doing such things as replacing long color names such as #ffffff with shorter equivalents such as #fff. The Microsoft Ajax Minifier was created by Microsoft employee Ron Logan. Internally, this tool was being used by several large Microsoft websites. We also used the tool heavily on the ASP.NET team. I convinced Ron to publish the tool on CodePlex so that everyone in the world could take advantage of it. You can download the tool from the ASP.NET Ajax website and read documentation for the tool here. I created the installer for the Microsoft Ajax Minifier. When creating the installer, I also created a Visual Studio build task to make it easy to minify all of your JavaScript and CSS files whenever you do a build within Visual Studio automatically. Read the Ajax Minifier Quick Start to learn how to configure the build task. 3. ySlow The ySlow tool is a free add-on for Firefox created by Yahoo that enables you to test the front-end of your website. For example, here are the current test results for the Superexpert.com website: The Superexpert.com website has an overall score of B (not perfect but not bad). The ySlow tool is not perfect. For example, the Superexpert.com website received a failing grade of F for not using a Content Delivery Network even though the website using the Microsoft Ajax Content Delivery Network for JavaScript files such as jQuery. Uptime After publishing a website live to the world, you want to ensure that the website does not encounter any issues and that it stays live. I use the following tools to monitor the Superexpert.com website now that it is live. 4. ELMAH ELMAH stands for Error Logging Modules and Handlers for ASP.NET. ELMAH enables you to record any errors that happen at your website so you can review them in the future. You can download ELMAH for free from the ELMAH project website. ELMAH works great with both ASP.NET Web Forms and ASP.NET MVC. You can configure ELMAH to store errors in a number of different stores including XML files, the Event Log, an Access database, a SQL database, an Oracle database, or in computer RAM. You also can configure ELMAH to email error messages to you when they happen. By default, you can access ELMAH by requesting the elmah.axd page from a website with ELMAH installed. Here’s what the elmah page looks like from the Superexpert.com website (this page is password-protected because secret information can be revealed in an error message): If you click on a particular error message, you can view the original Yellow Screen ASP.NET error message (even when the error message was never displayed to the actual user). I installed ELMAH by taking advantage of the new package manager for ASP.NET named NuGet (originally named NuPack). You can read the details about NuGet in the following blog entry by Scott Guthrie. You can download NuGet from CodePlex. 5. Pingdom I use Pingdom to verify that the Superexpert.com website is always up. You can sign up for Pingdom by visiting Pingdom.com. You can use Pingdom to monitor a single website for free. At the Pingdom website, you configure the frequency that your website gets pinged. I verify that the Superexpert.com website is up every 5 minutes. I have the Pingdom service verify that it can retrieve the string “Contact Us” from the website homepage. If your website goes down, you can configure Pingdom so that it sends an email, Twitter, SMS, or iPhone alert. I use the Pingdom iPhone app which looks like this: 6. Host Tracker If your website does go down then you need some way of determining whether it is a problem with your local network or if your website is down for everyone. I use a website named Host-Tracker.com to check how badly a website is down. Here’s what the Host-Tracker website displays for the Superexpert.com website when the website can be successfully pinged from everywhere in the world: Notice that Host-Tracker pinged the Superexpert.com website from 68 locations including Roubaix, France and Scranton, PA. Debugging I mean debugging in the broadest possible sense. I use the following tools when building a website to verify that I have not made a mistake. 7. HTML Spell Checker Why doesn’t Visual Studio have a built-in spell checker? Don’t know – I’ve always found this mysterious. Fortunately, however, a former member of the ASP.NET team wrote a free spell checker that you can use with your ASP.NET pages. I find a spell checker indispensible. It is easy to delude yourself that you are capable of perfect spelling. I’m always super embarrassed when I actually run the spell checking tool and discover all of my spelling mistakes. The fastest way to add the HTML Spell Checker extension to Visual Studio is to select the menu option Tools, Extension Manager within Visual Studio. Click on Online Gallery and search for HTML Spell Checker: 8. IIS SEO Toolkit If people cannot find your website through Google then you should not even bother to create it. Microsoft has a great extension for IIS named the IIS Search Engine Optimization Toolkit that you can use to identify issue with your website that would hurt its page rank. You also can use this tool to quickly create a sitemap for your website that you can submit to Google or Bing. You can even generate the sitemap for an ASP.NET MVC website. Here’s what the report overview for the Superexpert.com website looks like: Notice that the Sueprexpert.com website had plenty of violations. For example, there are 65 cases in which a page has a broken hyperlink. You can drill into these violations to identity the exact page and location where these violations occur. 9. LinqPad If your ASP.NET website accesses a database then you should be using LINQ to Entities with the Entity Framework. Using LINQ involves some magic. LINQ queries written in C# get converted into SQL queries for you. If you are not careful about how you write your LINQ queries, you could unintentionally build a really badly performing website. LinqPad is a free tool that enables you to experiment with your LINQ queries. It even works with Microsoft SQL CE 4 and Azure. You can use LinqPad to execute a LINQ to Entities query and see the results. You also can use it to see the resulting SQL that gets executed against the database: 10. .NET Reflector I use .NET Reflector daily. The .NET Reflector tool enables you to take any assembly and disassemble the assembly into C# or VB.NET code. You can use .NET Reflector to see the “Source Code” of an assembly even when you do not have the actual source code. You can download a free version of .NET Reflector from the Redgate website. I use .NET Reflector primarily to help me understand what code is doing internally. For example, I used .NET Reflector with the Sprite and Image Optimization Framework to better understand how the MVC Image helper works. Here’s part of the disassembled code from the Image helper class: Summary In this blog entry, I’ve discussed several of the tools that I used to create the Superexpert.com website. These are tools that I use to improve the performance, improve the SEO, verify the uptime, or debug the Superexpert.com website. All of the tools discussed in this blog entry are free. Furthermore, all of these tools work with both ASP.NET Web Forms and ASP.NET MVC. Let me know if there are any tools that you use daily when building ASP.NET websites.

    Read the article

  • CodePlex Daily Summary for Friday, December 10, 2010

    CodePlex Daily Summary for Friday, December 10, 2010Popular ReleasesFree Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.UserVoice Helper for WebMatrix: UserVoice Helper v0.9: This version will work with ASP.NET WebPages and ASP.NET MVC ApplicationsDNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionCouchDB.NET: CouchDB.NET 0.1: CouchDB.NET ------- Libraries and providers to use CouchDB features from .NET This distribution includes the following projects: - MachineKeyGenerator: Command line tool to generate a machine key string for use in App.Config and Web.Config files. - CouchDB.NET: Library to facilitate the use of CouchDB features. It uses Hadi Hariri's EasyHttp library to communicate with the CouchDB server. More info at: https://github.com/hhariri/EasyHttp - CouchDb.ASP.NET: ASP.NET Membership Provider and ASP...AutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...SubtitleTools: SubtitleTools 1.2: - Added auto insertion of RLE (RIGHT-TO-LEFT EMBEDDING) Unicode character for the RTL languages. - Fixed delete rows issue.PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.SuperSocket, an extensible socket application framework: SuperSocket 1.0 SP1: Fixed bugs: fixed a potential bug that the running state hadn't been updated after socket server stopped fixed a synchronization issue when clearing timeout session fixed a bug in ArraySegmentList fixed a bug on getting configuration valueCslaGenFork: CslaGenFork 4.0 CTP 2: The version is 4.0.1 CTP2 and was released 2010 December 7 and includes the following files: CslaGenFork 4.0.1-2010-12-07 Setup.msi Templates-2010-10-07.zip For getting started instructions, refer to How to section. Overview of the changes Since CTP1 there were 53 work items closed (28 features, 24 issues and 1 task). During this 60 days a lot of work has been done on several areas. First the stereotypes: EditableRoot is OK EditableChild is OK EditableRootCollection is OK Editable...My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.EnhSim: EnhSim 2.2.0 ALPHA: 2.2.0 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated En...ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).myCollections: Version 1.2: New in version 1.2: Big performance improvement. New Design (Added Outlook style View, New detail view, New Groub By...) Added Sort by Media Added Manage Movie Studio Zoom preference is now saved. Media name are now editable. Added Portuguese version You can now Hide details panel Add support for FLAC tags You can now imports books from BibTex Xml file BugFixingmytrip.mvc (CMS & e-Commerce): mytrip.mvc 1.0.49.0 beta: mytrip.mvc 1.0.49.0 beta web Web for install hosting System Requirements: NET 4.0, MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) mytrip.mvc 1.0.49.0 beta src System Requirements: Visual Studio 2010 or Web Deweloper 2010 MSSQL 2008 or MySql (auto creation table to database) if .\SQLEXPRESS auto creation database (App_Data folder) Connector/Net 6.3.4, MVC3 RC WARNING For run and debug mytrip.mvc 1.0.49.0 beta src download and ...Menu and Context Menu for Silverlight 4.0: Silverlight Menu and Context Menu v2.3 Beta: - Added keyboard navigation support with access keys - Shortcuts like Ctrl-Alt-A are now supported(where the browser permits it) - The PopupMenuSeparator is now completely based on the PopupMenuItem class - Moved item manipulation code to a partial class in PopupMenuItemsControl.cs - Moved menu management and keyboard navigation code to the new PopupMenuManager class - Simplified the layout by removing the RootGrid element(all content is now placed in OverlayCanvas and is accessed by the new ...MiniTwitter: 1.62: MiniTwitter 1.62 ???? ?? ??????????????????????????????????????? 140 ?????????????????????????? ???????????????????????????????? ?? ??????????????????????????????????New ProjectsAccountingGuid: for testing onlyChinese Nag Screen: This is a simple but effective program for learning to recognize Mandarin characters. The application sits in the system tray and displays a character random through your day. You can only get rid of it by typing in the pinyin.CouchDB.NET: .NET libraries to use CouchDB from .NET. Included are Membership and Roles provider so that you may use CouchDB as your integrated DB backend on your ASP.NET projects. Please see the readme.txt file for instructions.DataSetMapper: The idea behind DataSetMapper is to provide support for the automatic mapping of legacy DataSet based structures to proper domain objects. In essence the aim is to create the Mapping aspect of an ORM without the persistence concerns.EasyXnaAudio: EasyXnaAudio is a simple component for use in XNA Game Studio 3.1/4.0 projects that provides an easy interface to load, play, and manage songs and sounds in your game.FixMailboxSD - Exchange Mailbox Security Descriptor Canonicalizer: This is a small utility to fix mailbox security descriptors in Microsoft Exchange that have become non-canonical. It must be run on a machine with Exchange System Manager for Exchange 2003 installed, but it will work against mailboxes on 2003 or 2007 (not 2010).GearSynth Plugin: a plugin for graphsynth that makes gear trainsGroceryList: TBD with first versionIBMS Suite Build on the Associate Platform: A new way of approaching Information Systems. From the UI, users of the IS will be able to build and manipulate the IS to whatever way fits their needs. We have simplified development, removed the chasm between management and IT and give the power of simplification to the user!Ivy Nasha Framework: A PHP FrameworkjQuery helpers for ASP.NET and ASP.NET MVC: jQuery helpers makes it easier for ASP.NET developers to build jQuery scripts. It's developed in C#. JSTest.NET: JSTest.NET enabled JavaScript unit tests to be run directly in the test framework of your choice (MSTest, NUnit, xUnit, etc) and all without the need for a web browser. JSTest.NET utilizes the Windows Script Host (CScript) to run fast, fully debuggable JavaScript unit tests!Multicore Task Framework: MTF is a visual tool to simplify building robust component based .NET applications. MTF is designed to make full use of the power of multi-core processors.Nazha Script On DLR: NazhaPascalESE - a Delphi/Pascal class library for Microsoft ESENT database API: This pascal class library, primarily written for Delphi's Object Pascal, provides a lightweight and easy-to-use wrapper around the ESENT API. Perpetuum Hangar: A Character planner for the online game "Perpetuum"Projeto Exemplo: Projeto exemplo para a atividade 3 da disciplina.PSiteCode: PSiteCode Manager rScript Engine: rScript scripting engine is a managed script engine wrote in C# that supports Visual Basic and C# syntax based scripts. It provides Type's for dynamically getting and setting properties, invoking methods and run-time compilation of scripts.SharePoint 2010 User Profile WebPart: This webpart shows all user profile properties and values of the properties for a particular user profile. The results are shown in a table containing the display and technical name together with the user value.SHC: shriSHMTools: SHMTools is set of compatible software tools (mostly Matlab based) for structural health monitoring (SHM) research. This includes algorithms for system design, modeling, data acquisition, feature extraction, classification, and prognosis.SwapWin: SwapWin is a tiny and handy tool which swaps windows on different screens. Developed in C# and .NET 3.5.Teachers Diary: Teachers diary is application realizing electronic teacher's notepad with student marks. Current localization of the application is in czech language only.VkApp: Vk app for downloadingWebSpirit: A lightweighted web server implemented by C# which supports sufficient extendible feature. By zjuWPF & MEF Studio: WPF & MEF Studio

    Read the article

  • Announcing the release of the Windows Azure SDK 2.1 for .NET

    - by ScottGu
    Today we released the v2.1 update of the Windows Azure SDK for .NET.  This is a major refresh of the Windows Azure SDK and it includes some great new features and enhancements. These new capabilities include: Visual Studio 2013 Preview Support: The Windows Azure SDK now supports using the new VS 2013 Preview Visual Studio 2013 VM Image: Windows Azure now has a built-in VM image that you can use to host and develop with VS 2013 in the cloud Visual Studio Server Explorer Enhancements: Redesigned with improved filtering and auto-loading of subscription resources Virtual Machines: Start and Stop VM’s w/suspend billing directly from within Visual Studio Cloud Services: New Emulator Express option with reduced footprint and Run as Normal User support Service Bus: New high availability options, Notification Hub support, Improved VS tooling PowerShell Automation: Lots of new PowerShell commands for automating Web Sites, Cloud Services, VMs and more All of these SDK enhancements are now available to start using immediately and you can download the SDK from the Windows Azure .NET Developer Center.  Visual Studio’s Team Foundation Service (http://tfs.visualstudio.com/) has also been updated to support today’s SDK 2.1 release, and the SDK 2.1 features can now be used with it (including with automated builds + tests). Below are more details on the new features and capabilities released today: Visual Studio 2013 Preview Support Today’s Window Azure SDK 2.1 release adds support for the recent Visual Studio 2013 Preview. The 2.1 SDK also works with Visual Studio 2010 and Visual Studio 2012, and works side by side with the previous Windows Azure SDK 1.8 and 2.0 releases. To install the Windows Azure SDK 2.1 on your local computer, choose the “install the sdk” link from the Windows Azure .NET Developer Center. Then, chose which version of Visual Studio you want to use it with.  Clicking the third link will install the SDK with the latest VS 2013 Preview: If you don’t already have the Visual Studio 2013 Preview installed on your machine, this will also install Visual Studio Express 2013 Preview for Web. Visual Studio 2013 VM Image Hosted in the Cloud One of the requests we’ve heard from several customers has been to have the ability to host Visual Studio within the cloud (avoiding the need to install anything locally on your computer). With today’s SDK update we’ve added a new VM image to the Windows Azure VM Gallery that has Visual Studio Ultimate 2013 Preview, SharePoint 2013, SQL Server 2012 Express and the Windows Azure 2.1 SDK already installed on it.  This provides a really easy way to create a development environment in the cloud with the latest tools. With the recent shutdown and suspend billing feature we shipped on Windows Azure last month, you can spin up the image only when you want to do active development, and then shut down the virtual machine and not have to worry about usage charges while the virtual machine is not in use. You can create your own VS image in the cloud by using the New->Compute->Virtual Machine->From Gallery menu within the Windows Azure Management Portal, and then by selecting the “Visual Studio Ultimate 2013 Preview” template: Visual Studio Server Explorer: Improved Filtering/Management of Subscription Resources With the Windows Azure SDK 2.1 release you’ll notice significant improvements in the Visual Studio Server Explorer. The explorer has been redesigned so that all Windows Azure services are now contained under a single Windows Azure node.  From the top level node you can now manage your Windows Azure credentials, import a subscription file or filter Server Explorer to only show services from particular subscriptions or regions. Note: The Web Sites and Mobile Services nodes will appear outside the Windows Azure Node until the final release of VS 2013. If you have installed the ASP.NET and Web Tools Preview Refresh, though, the Web Sites node will appear inside the Windows Azure node even with the VS 2013 Preview. Once your subscription information is added, Windows Azure services from all your subscriptions are automatically enumerated in the Server Explorer. You no longer need to manually add services to Server Explorer individually. This provides a convenient way of viewing all of your cloud services, storage accounts, service bus namespaces, virtual machines, and web sites from one location: Subscription and Region Filtering Support Using the Windows Azure node in Server Explorer, you can also now filter your Windows Azure services in the Server Explorer by the subscription or region they are in.  If you have multiple subscriptions but need to focus your attention to just a few subscription for some period of time, this a handy way to hide the services from other subscriptions view until they become relevant. You can do the same sort of filtering by region. To enable this, just select “Filter Services” from the context menu on the Windows Azure node: Then choose the subscriptions and/or regions you want to filter by. In the below example, I’ve decided to show services from my pay-as-you-go subscription within the East US region: Visual Studio will then automatically filter the items that show up in the Server Explorer appropriately: With storage accounts and service bus namespaces, you sometimes need to work with services outside your subscription. To accommodate that scenario, those services allow you to attach an external account (from the context menu). You’ll notice that external accounts have a slightly different icon in server explorer to indicate they are from outside your subscription. Other Improvements We’ve also improved the Server Explorer by adding additional properties and actions to the service exposed. You now have access to most of the properties on a cloud service, deployment slot, role or role instance as well as the properties on storage accounts, virtual machines and web sites. Just select the object of interest in Server Explorer and view the properties in the property pane. We also now have full support for creating/deleting/update storage tables, blobs and queues from directly within Server Explorer.  Simply right-click on the appropriate storage account node and you can create them directly within Visual Studio: Virtual Machines: Start/Stop within Visual Studio Virtual Machines now have context menu actions that allow you start, shutdown, restart and delete a Virtual Machine directly within the Visual Studio Server Explorer. The shutdown action enables you to shut down the virtual machine and suspend billing when the VM is not is use, and easily restart it when you need it: This is especially useful in Dev/Test scenarios where you can start a VM – such as a SQL Server – during your development session and then shut it down / suspend billing when you are not developing (and no longer be billed for it). You can also now directly remote desktop into VMs using the “Connect using Remote Desktop” context menu command in VS Server Explorer.  Cloud Services: Emulator Express with Run as Normal User Support You can now launch Visual Studio and run your cloud services locally as a Normal User (without having to elevate to an administrator account) using a new Emulator Express option included as a preview feature with this SDK release.  Emulator Express is a version of the Windows Azure Compute Emulator that runs a restricted mode – one instance per role – and it doesn’t require administrative permissions and uses 40% less resources than the full Windows Azure Emulator. Emulator Express supports both web and worker roles. To run your application locally using the Emulator Express option, simply change the following settings in the Windows Azure project. On the shortcut menu for the Windows Azure project, choose Properties, and then choose the Web tab. Check the setting for IIS (Internet Information Services). Make sure that the option is set to IIS Express, not the full version of IIS. Emulator Express is not compatible with full IIS. On the Web tab, choose the option for Emulator Express. Service Bus: Notification Hubs With the Windows Azure SDK 2.1 release we are adding support for Windows Azure Notification Hubs as part of our official Windows Azure SDK, inside of Microsoft.ServiceBus.dll (previously the Notification Hub functionality was in a preview assembly). You are now able to create, update and delete Notification Hubs programmatically, manage your device registrations, and send push notifications to all your mobile clients across all platforms (Windows Store, Windows Phone 8, iOS, and Android). Learn more about Notification Hubs on MSDN here, or watch the Notification Hubs //BUILD/ presentation here. Service Bus: Paired Namespaces One of the new features included with today’s Windows Azure SDK 2.1 release is support for Service Bus “Paired Namespaces”.  Paired Namespaces enable you to better handle situations where a Service Bus service namespace becomes unavailable (for example: due to connectivity issues or an outage) and you are unable to send or receive messages to the namespace hosting the queue, topic, or subscription. Previously,to handle this scenario you had to manually setup separate namespaces that can act as a backup, then implement manual failover and retry logic which was sometimes tricky to get right. Service Bus now supports Paired Namespaces, which enables you to connect two namespaces together. When you activate the secondary namespace, messages are stored in the secondary queue for delivery to the primary queue at a later time. If the primary container (namespace) becomes unavailable for some reason, automatic failover enables the messages in the secondary queue. For detailed information about paired namespaces and high availability, see the new topic Asynchronous Messaging Patterns and High Availability. Service Bus: Tooling Improvements In this release, the Windows Azure Tools for Visual Studio contain several enhancements and changes to the management of Service Bus messaging entities using Visual Studio’s Server Explorer. The most noticeable change is that the Service Bus node is now integrated into the Windows Azure node, and supports integrated subscription management. Additionally, there has been a change to the code generated by the Windows Azure Worker Role with Service Bus Queue project template. This code now uses an event-driven “message pump” programming model using the QueueClient.OnMessage method. PowerShell: Tons of New Automation Commands Since my last blog post on the previous Windows Azure SDK 2.0 release, we’ve updated Windows Azure PowerShell (which is a separate download) five times. You can find the full change log here. We’ve added new cmdlets in the following areas: China instance and Windows Azure Pack support Environment Configuration VMs Cloud Services Web Sites Storage SQL Azure Service Bus China Instance and Windows Azure Pack We now support the following cmdlets for the China instance and Windows Azure Pack, respectively: China Instance: Web Sites, Service Bus, Storage, Cloud Service, VMs, Network Windows Azure Pack: Web Sites, Service Bus We will have full cmdlet support for these two Windows Azure environments in PowerShell in the near future. Virtual Machines: Stop/Start Virtual Machines Similar to the Start/Stop VM capability in VS Server Explorer, you can now stop your VM and suspend billing: If you want to keep the original behavior of keeping your stopped VM provisioned, you can pass in the -StayProvisioned switch parameter. Virtual Machines: VM endpoint ACLs We’ve added and updated a bunch of cmdlets for you to configure fine-grained network ACL on your VM endpoints. You can use the following cmdlets to create ACL config and apply them to a VM endpoint: New-AzureAclConfig Get-AzureAclConfig Set-AzureAclConfig Remove-AzureAclConfig Add-AzureEndpoint -ACL Set-AzureEndpoint –ACL The following example shows how to add an ACL rule to an existing endpoint of a VM. Other improvements for Virtual Machine management includes Added -NoWinRMEndpoint parameter to New-AzureQuickVM and Add-AzureProvisioningConfig to disable Windows Remote Management Added -DirectServerReturn parameter to Add-AzureEndpoint and Set-AzureEndpoint to enable/disable direct server return Added Set-AzureLoadBalancedEndpoint cmdlet to modify load balanced endpoints Cloud Services: Remote Desktop and Diagnostics Remote Desktop and Diagnostics are popular debugging options for Cloud Services. We’ve introduced cmdlets to help you configure these two Cloud Service extensions from Windows Azure PowerShell. Windows Azure Cloud Services Remote Desktop extension: New-AzureServiceRemoteDesktopExtensionConfig Get-AzureServiceRemoteDesktopExtension Set-AzureServiceRemoteDesktopExtension Remove-AzureServiceRemoteDesktopExtension Windows Azure Cloud Services Diagnostics extension New-AzureServiceDiagnosticsExtensionConfig Get-AzureServiceDiagnosticsExtension Set-AzureServiceDiagnosticsExtension Remove-AzureServiceDiagnosticsExtension The following example shows how to enable Remote Desktop for a Cloud Service. Web Sites: Diagnostics With our last SDK update, we introduced the Get-AzureWebsiteLog –Tail cmdlet to get the log streaming of your Web Sites. Recently, we’ve also added cmdlets to configure Web Site application diagnostics: Enable-AzureWebsiteApplicationDiagnostic Disable-AzureWebsiteApplicationDiagnostic The following 2 examples show how to enable application diagnostics to the file system and a Windows Azure Storage Table: SQL Database Previously, you had to know the SQL Database server admin username and password if you want to manage the database in that SQL Database server. Recently, we’ve made the experience much easier by not requiring the admin credential if the database server is in your subscription. So you can simply specify the -ServerName parameter to tell Windows Azure PowerShell which server you want to use for the following cmdlets. Get-AzureSqlDatabase New-AzureSqlDatabase Remove-AzureSqlDatabase Set-AzureSqlDatabase We’ve also added a -AllowAllAzureServices parameter to New-AzureSqlDatabaseServerFirewallRule so that you can easily add a firewall rule to whitelist all Windows Azure IP addresses. Besides the above experience improvements, we’ve also added cmdlets get the database server quota and set the database service objective. Check out the following cmdlets for details. Get-AzureSqlDatabaseServerQuota Get-AzureSqlDatabaseServiceObjective Set-AzureSqlDatabase –ServiceObjective Storage and Service Bus Other new cmdlets include Storage: CRUD cmdlets for Azure Tables and Queues Service Bus: Cmdlets for managing authorization rules on your Service Bus Namespace, Queue, Topic, Relay and NotificationHub Summary Today’s release includes a bunch of great features that enable you to build even better cloud solutions.  All the above features/enhancements are shipped and available to use immediately as part of the 2.1 release of the Windows Azure SDK for .NET. If you don’t already have a Windows Azure account, you can sign-up for a free trial and start using all of the above features today.  Then visit the Windows Azure Developer Center to learn more about how to build apps with it. Hope this helps, Scott P.S. In addition to blogging, I am also now using Twitter for quick updates and to share links. Follow me at: twitter.com/scottgu

    Read the article

  • Install Control Center Agent on Oracle Application Server

    - by qianqian.wu
    Control Center Agent (CCA) The Control Center Agent is the OWB component that runs the Template Mappings in the Oracle Containers for J2EE (OC4J) server; also referred to as the J2EE Runtime. The Control Center Agent provides a Java-based runtime environment that can be installed on Oracle and non-Oracle database hosts. The Control Center Agent provides fundamental infrastructure for the heterogeneous, Code Template-based mapping support and Web services-related features of OWB in this release. In Oracle Warehouse Builder 11gR2 the Control Center Agent, by default will run in the built-in OC4J that is bundled in the Oracle Home. Besides that, you also have ability to install the Control Center Agent in an Oracle Application Server install. In this article, you will find step-by-step instructions how to install the Control Center Agent on an Oracle Application Server instance. The instructions cover the following tasks: Task 1: Install and Configure the Application Server Task 2: Deploy the Control Center Agent to the Application Server Task 3: Optional Configuration Tasks   Task 1: Install and Configure the Application Server Before configuring the Application Server, you need to install it from Oracle Application Server CD-ROM, or by downloading the installation program from Oracle Technology Network (OTN). Once the installation is completed, you are ready to configure the Application Server. The purpose of the configuration task is to make sure the Control Center Agent ear file can be deployed and runs in the Application Server successfully. The essential configuration tasks are outlined below: · Modify the OC4J Startup Script · Set up Control Center Agent Server Side Logging · Set up Audit Table Data Source · Copy ct_permissions.properties File · Set up Security Roles for Control Center Agent · Create JMS Queues · Install JDBC Drivers to OC4J Modify the OC4J Startup Script The OC4J startup script “opmn.xml” is located in Application Server configuration directory, $AS_HOME/opmn/conf. $AS_HOME stands for the root home directory of the application server. Open the file opmn.xml in a text editor, and alter the contents of the file as displayed in the following sample. You need to make sure that: The MaxPerSize is set to 128M. This is to ensure that you allocate enough PermGen space to OC4J to run Control Center Agent. This will prevent java.lang.OutOfMemoryError when running the agent. The Python.path sets the path for the Python library files used by the Control Center Agent: jython_lib.zip and jython_owblib.jar. These two files are in the $OWB_HOME/owb/lib/int directory, where $OWB_HOME is the directory where owb is installed. · The km_security_needed determines whether restrictions will be applied to the kinds of operating system commands allowed to be executed by the OWB Code Template script executed by Control Center Agent. Setting km_security_needed to “true” enforces such restriction while setting it to “false” removes such restrictions. Set up Control Center Agent Server Side Logging Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file j2ee-logging.xml in a text editor and add the following lines to the log handler section. The jrt-internal-log-handler is the handler used by Control Center Agent runtime logger to create log files. Then add the following entry into the loggers section to create the logger for Control Center Agent runtime auditing. Set up Audit Table Data Source To enable Audit Table logging, a managed data source and connection pool need to be set up before Control Center Agent deployment. Ensure that you are in the Application Server configuration directory, $AS_HOME/j2ee/home/config. Open the file data-sources.xml in a text editor. Define the audit data source shown below in the file, <managed-data-source name="AuditDS" connection-pool-name="OWBSYS Audit   Connection Pool" jndi-name="jdbc/AuditDS"/> <connection-pool name="OWBSYS Audit Connection Pool">   <connection-factory factory-class="oracle.jdbc.pool.OracleDataSource"     user="owbsys_audit" password="owbsys_audit"     url="jdbc:oracle:thin:@//localhost:1521/ORCL"/> </connection-pool> Copy ct_permissions.properties File The ct_permissions.properties can be obtained from $OWB_HOME /owb/jrt/config/ directory. You need to copy the file to $AS_HOME/j2ee/home/config directory.This properties file takes effect when the setting km-security is set to true in Control Center Agent. By default the ALLOWED_CMD is commented out in ct_permissions.properties file. This prevents all system command from being invoked from scripts executed in Control Center Agent (when km-security is set to true). To allow certain system commands to be invoked, ALLOWED_CMD needs to be uncommented out, and the system commands (allowed to be invoked) need to be added to the ALLOWED_CMD. Set up Security Roles for Control Center Agent You can set up the Control Center Agent security roles through Oracle Enterprise Manager. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Security. Click the task icon next to Security Providers. 2. On Security Providers page click on the button “Instance Level Security”. On Instance Level Security page, go to “Realms” tab. You will see a row for the default realm “jazn.com” in the results table. It has a “Roles” column and a “Users” column. Click on the number in “Roles” column. In the “Roles” page it will display all the roles available for the realm. Click on “Create” button to create a new role “OWB_J2EE_ EXECUTOR”. 3. On the Add Role screen, enter Name OWB_J2EE_EXECUTOR, and click OK. 4. Follow the same steps as before, and create a new role “OWB_J2EE_OPERATOR”. 5. Assign role “oc4j-administrators” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_OPERATOR” by moving these roles from “Available Roles” and click “OK” to save. 6. Go back to Instance Level Security page and create a new role “OWB_J2EE_ADMINISTRATOR”. 7. Assign roles “OWB_J2EE_ OPERATOR” and “OWB_J2EE_EXECUTOR” to the role “OWB_J2EE_ ADMINISTRATOR” by moving these roles from “Available Roles” and click “OK” to save. 8.Go back to Instance Level Security page. This time, click on the number in “Users” column for the realm “jazn.com”. In the “Users” page, it shows all the users defined for this realm. Locate the user “oc4jadmin” in the results table and click on it. 9. Assign the roles “OWB_J2EE_ADMINISTRATOR” and “oc4j-app-administrators” to this user by moving the role from the “Available Roles” selection box to “Selected Roles” box and click “Apply” to save. 10. Go back to Instance Level Security page and create a new role “OWB_INTERNAL_USERS”, assign no user or role to this role. Simply click “OK” to create this role. Now you have finished creating the security roles required for Control Center Agent. Create JMS Queues You need to create two JMS queues for Control Center Agent: owbQueue and abort_owbQueue. 1. Now go to OC4J home Page. On the OC4J home screen, click the Administration tab. On the Administration Tasks screen, expand Services and then expand Enterprise Messaging Service. Click the task icon next to JMS Destinations. 2. On JMS Destinations page, click “Create New” button to create a new JMS queue. On Add Destination page, choose “Queue” as Destination Type. Put “owbQueue” as Destination Name. Select “In Memory Persistence Only” as the Persistence Type and put “jms/owbQueue” as JNDI Location and click on “OK” to finish. 3. Follow the same instruction as above to create the owb_abortQueue. Now you have finished creating the JMS queues required for Control Center Agent. Install JDBC Drivers to OC4J In order to execute Code Templates using commercial databases other than Oracle, e.g. DB2, SQL Server etc, the corresponding jdbc driver files need to be added to $AS_HOME/j2ee/home/applib directory. 1. To install other JDBC drivers to OC4J, first obtain the .jar file containing the JDBC driver. All the external JDBC drivers .jar files can be found in the directory: $OWB_HOME/owb/lib/ext/. For DB2, the files needed are db2jcc.jar and db2jcc_license_cu.jar. For SQL Server the file is sqljdbc.jar. For sunopsis JDBC drivers, the file needed is snpsxmlo.jar. 2. Copy the required JDBC driver file into the directory $AS_HOME/j2ee/home/applib. Now you have finished the Application Server configuration. To make the configuration to take an effect, you need to restart the Application Server.   Task 2: Deploy the Control Center Agent to the Application Server Now you can deploy the Control Center Agent to the Application Server. In a web browser, navigate to Enterprise Manager Homepage (e.g. http://hostname:8889/em). 1. Log in using the oc4jadmin credentials. After the Cluster Topology page is loaded, click home (the OC4J instance). This takes you to the home page of the OC4J instance. On the OC4J home screen, click the Applications tab. Click Deploy to begin deploying Control Center Agent. 2. On the Deploy: Select Archive screen, under Archive, select Archive is present on local host. Upload the archive to the server where Application Server Control is running. Click Browse and locate the jrt.ear file in the $OWB_HOME/owb/jrt/applications directory. Under Deployment Plan, select Automatically create a new deployment plan. Click Next. 3. Wait for the ear file to be uploaded to Application Server. On the Deploy: Application Attributes screen, enter Application Name jrt, and Context Root jrt. Leave the other attributes at their default values. Click Next. 4. On Deploy: Deployment Settings screen, leave all attributes at their default values, and click Deploy. This will take about 1 minute or so and when the application is deployed successfully, a confirmation message will be displayed. Now the Control Center Agent is started automatically. Go back to OC4J home page and click on Applications tab to make sure the deployed application jrt is showing in the applications list.   Task 3: Optional Configuration Tasks The optional configuration tasks contain: · Secure Control Center Agent Web Service · Setting the PATH Environment Variable Secure Control Center Agent Web Service If you want to use JRTWebService with a secure website, you need to do the following steps, 1. Create a file “secure-web-site.xml” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. A sample secure-web-site.xml is shown as below. We need to modify the “protocol” to “https”, and “secure” to “true”, also choose an port as the secure http port. Also we need to add the entry “ssl-config” in the file. Remember to use the absolute path for the key store file. 2. Modify the file “server.xml” that is located at $AS_HOME/j2ee/home/config directory. Then add the <web-site> element in the file for the secure-web-site. 3. Create a key store file “serverkeystore.jks” in the $AS_HOME/j2ee/home/config directory. The file can be obtained from $OWB_HOME/owb/jrt/config directory. After the three files are altered, restart the application server. Now you can access the JRTWebService in SSL way through https://hostname:4443/jrt/webservice. Setting the PATH Environment Variable Sometimes, some system commands such as linux ls, sh etc, can not be executed successfully during the script execution due to they are not found in PATH. To ensure they work normally, you can setup the environment variable PATH. Let’s navigate to the Enterprise Manager Homepage. 1. Go to OC4J home screen and click the Administration tab. Expand Administration Tasks, then expand Properties. Click the task icon next to Server Properties. 2. On the Server Properties screen, scroll down to Environment Variables section. Under Environment Variables, click Add Another Row. Enter PATH in Name, and fill Value with directories that contain the system commands. Click Apply.   After you work through this article, I believe you have developed a deeper understanding of the Control Center Agent installation process, and you can apply this knowledge in other installation plan such as Control Center Agent installation on Standalone OC4J.

    Read the article

  • Creating static NAT blocks outbound traffic Cisco ASA

    - by natediggs
    Hi Everyone, I have two web servers sitting behind a Cisco ASA 5505, which I don't have much experience with. I'm trying to create two static NATs. One static NAT that goes to xx.xx.xx.150 and another that goes to xx.xx.xx.151. I've created the static NAT for the .150 web server and it works FINE. Incoming and outgoing traffic work great. This is the staging web server. I now need to duplicate the setup for the production web server. So, I connect the webserver to the firewall, change the public IP address on one of the NICs reboot the server and I have outbound internet access. Then I run the command: static (inside,outside) xx.xx.xx.150 192.168.1.x which is successful. I then run the command: access-list acl-outside permit tcp any host xx.xx.xx.150 eq 80 Which is successful. I then try to browse the internet and I get nothing. I try to telnet in through port 80 and I get nothing (though I'm guessing because the response to the telnet request is being blocked). I've tried this with the production web server and then I tried it with another web server that is for internal testing and have the exact same problem. Both work fine until I run the static NAT rule and then no outbound internet access. I have a feeling that it's something simple that I'm missing, but my limited experience with this device is killing me. Below I've pasted the current configuration. I'm currently trying to get this to work on the .153 server which is the internal testing server. Once I can verify that works, I'll try it with production. : Saved : ASA Version 8.2(4) ! hostname QG domain-name XX.com enable password passwd names ! interface Ethernet0/0 switchport access vlan 2 ! interface Ethernet0/1 ! interface Ethernet0/2 ! interface Ethernet0/3 ! interface Ethernet0/4 ! interface Ethernet0/5 ! interface Ethernet0/6 ! interface Ethernet0/7 ! interface Vlan1 nameif inside security-level 100 ip address 192.168.1.1 255.255.255.0 ! interface Vlan2 nameif outside security-level 0 ip address XX.XX.XX.148 255.255.255.0 ! interface Vlan3 shutdown no forward interface Vlan1 nameif dmz security-level 50 ip address dhcp ! boot system disk0:/asa824.bin ftp mode passive clock timezone EST -5 clock summer-time EDT recurring dns server-group DefaultDNS domain-name fw.XXgroup.com same-security-traffic permit inter-interface access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.150 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq www access-list acl-outside extended permit tcp any host XX.XX.XX.151 eq https access-list acl-outside extended permit tcp any host XX.XX.XX.153 eq www access-list inside_access_in extended permit ip 192.168.1.0 255.255.255.0 any access-list inside_nat0_outbound extended permit ip any 192.168.1.32 255.255.255.240 pager lines 24 logging enable logging asdm informational mtu inside 1500 mtu outside 1500 mtu dmz 1500 ip local pool VPNIPs 192.168.1.35-192.168.1.44 mask 255.255.255.0 icmp unreachable rate-limit 1 burst-size 1 asdm image disk0:/asdm-635.bin no asdm history enable arp timeout 14400 global (outside) 1 interface nat (inside) 0 access-list inside_nat0_outbound nat (inside) 1 0.0.0.0 0.0.0.0 static (inside,outside) XX.XX.XX150 192.168.1.100 netmask 255.255.255.255 static (inside,outside) XX.XX.XX153 192.168.1.102 netmask 255.255.255.255 access-group acl-outside in interface outside route outside 0.0.0.0 0.0.0.0 XX.XX.XX129 1 timeout xlate 3:00:00 timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02 timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00 timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00 timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute timeout tcp-proxy-reassembly 0:01:00 dynamic-access-policy-record DfltAccessPolicy aaa authorization command LOCAL http server enable http 192.168.1.0 255.255.255.0 inside http 0.0.0.0 0.0.0.0 outside no snmp-server location no snmp-server contact snmp-server enable traps snmp authentication linkup linkdown coldstart crypto ipsec transform-set ESP-3DES-SHA esp-3des esp-sha-hmac crypto ipsec security-association lifetime seconds 28800 crypto ipsec security-association lifetime kilobytes 4608000 crypto dynamic-map outside_dyn_map 20 set pfs group1 crypto dynamic-map outside_dyn_map 20 set transform-set ESP-3DES-SHA crypto map outside_map 65535 ipsec-isakmp dynamic outside_dyn_map crypto map outside_map interface outside crypto isakmp enable outside crypto isakmp policy 10 authentication crack encryption 3des hash sha group 2 lifetime 86400 no crypto isakmp nat-traversal client-update enable telnet timeout 5 ssh timeout 5 console timeout 0 dhcpd auto_config outside ! dhcpd address 192.168.1.2-192.168.1.33 inside dhcpd dns 208.77.88.4 interface inside dhcpd enable inside ! threat-detection basic-threat threat-detection statistics access-list no threat-detection statistics tcp-intercept webvpn enable outside svc image disk0:/sslclient-win-1.1.0.154.pkg 1 svc image disk0:/anyconnect-win-2.5.2019-k9.pkg 2 svc enable group-policy ATSAdmin internal group-policy ATSAdmin attributes dns-server value 208.77.88.4 208.85.174.9 vpn-tunnel-protocol IPSec svc webvpn webvpn url-list none svc keep-installer installed svc rekey method ssl svc ask enable username qgadmin password /oHfeGQ/R.bd3KPR encrypted privilege 15 username benl password 0HNIGQNI0uruJvhW encrypted privilege 0 username benl attributes vpn-group-policy ATSAdmin username kuzma password rH7MM7laoynyvf9U encrypted privilege 0 username kuzma attributes vpn-group-policy ATSAdmin username nate password BXHOURyT37e4O5mt encrypted privilege 0 username nate attributes vpn-group-policy ATSAdmin tunnel-group ATSAdmin type remote-access tunnel-group ATSAdmin general-attributes address-pool VPNIPs default-group-policy ATSAdmin tunnel-group SSLVPN type remote-access tunnel-group SSLVPN general-attributes address-pool VPNIPs default-group-policy ATSAdmin ! class-map inspection_default match default-inspection-traffic ! ! policy-map type inspect dns preset_dns_map parameters message-length maximum 512 policy-map global_policy class inspection_default inspect dns preset_dns_map inspect ftp inspect h323 h225 inspect h323 ras inspect rsh inspect rtsp inspect esmtp inspect sqlnet inspect skinny inspect sunrpc inspect xdmcp inspect sip inspect netbios inspect tftp inspect ip-options ! service-policy global_policy global privilege cmd level 3 mode exec command perfmon privilege cmd level 3 mode exec command ping privilege cmd level 3 mode exec command who privilege cmd level 3 mode exec command logging privilege cmd level 3 mode exec command failover privilege show level 5 mode exec command running-config privilege show level 3 mode exec command reload privilege show level 3 mode exec command mode privilege show level 3 mode exec command firewall privilege show level 3 mode exec command interface privilege show level 3 mode exec command clock privilege show level 3 mode exec command dns-hosts privilege show level 3 mode exec command access-list privilege show level 3 mode exec command logging privilege show level 3 mode exec command ip privilege show level 3 mode exec command failover privilege show level 3 mode exec command asdm privilege show level 3 mode exec command arp privilege show level 3 mode exec command route privilege show level 3 mode exec command ospf privilege show level 3 mode exec command aaa-server privilege show level 3 mode exec command aaa privilege show level 3 mode exec command crypto privilege show level 3 mode exec command vpn-sessiondb privilege show level 3 mode exec command ssh privilege show level 3 mode exec command dhcpd privilege show level 3 mode exec command vpn privilege show level 3 mode exec command blocks privilege show level 3 mode exec command uauth privilege show level 3 mode configure command interface privilege show level 3 mode configure command clock privilege show level 3 mode configure command access-list privilege show level 3 mode configure command logging privilege show level 3 mode configure command ip privilege show level 3 mode configure command failover privilege show level 5 mode configure command asdm privilege show level 3 mode configure command arp privilege show level 3 mode configure command route privilege show level 3 mode configure command aaa-server privilege show level 3 mode configure command aaa privilege show level 3 mode configure command crypto privilege show level 3 mode configure command ssh privilege show level 3 mode configure command dhcpd privilege show level 5 mode configure command privilege privilege clear level 3 mode exec command dns-hosts privilege clear level 3 mode exec command logging privilege clear level 3 mode exec command arp privilege clear level 3 mode exec command aaa-server privilege clear level 3 mode exec command crypto privilege cmd level 3 mode configure command failover privilege clear level 3 mode configure command logging privilege clear level 3 mode configure command arp privilege clear level 3 mode configure command crypto privilege clear level 3 mode configure command aaa-server prompt hostname context call-home profile CiscoTAC-1 no active destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService destination address email [email protected] destination transport-method http subscribe-to-alert-group diagnostic subscribe-to-alert-group environment subscribe-to-alert-group inventory periodic monthly subscribe-to-alert-group configuration periodic monthly subscribe-to-alert-group telemetry periodic daily Cryptochecksum:0ed0580e151af288d865f4f3603d792a : end asdm image disk0:/asdm-635.bin no asdm history enable

    Read the article

  • CodePlex Daily Summary for Thursday, June 30, 2011

    CodePlex Daily Summary for Thursday, June 30, 2011Popular ReleasesASP.NET Comet Ajax Library (Reverse Ajax - Server Push): Reverse Ajax Samples v1.53: 16 Comprehensive ASP.NET Ajax / Reverse Ajax / WCF / MVC / Mono samplesReactive Extensions - Extensions (Rxx): Rxx 1.1: What's NewRelated Work Items Please read the latest release notes for details about what's new. About LabsAll "Labs" downloads include the Rxx.dll assembly, so only a single download is required. To start RxxLabs.exe, right-mouse click and select Run as Administrator; otherwise, do not run the Reactive WebClient lab because it will crash the program. RxxLabs.exe requires administrator privileges for the Reactive WebClient lab to register a local HTTP port. To launch the Silverlight labs...CommonLibrary.NET: CommonLibrary.NET - 0.9.7 Final: A collection of very reusable code and components in C# 4.0 ranging from ActiveRecord, Csv, Command Line Parsing, Configuration, Holiday Calendars, Logging, Authentication, and much more. Samples in <root>\src\Lib\CommonLibrary.NET\Samples CommonLibrary.NET 0.9.7Documentation 6738 6503 New 6535 Enhancements 6759 6748 6583 6737datajs - JavaScript Library for data-centric web applications: datajs version 1.0.0: datajs is a cross-browser and UI agnostic JavaScript library that enables data-centric web applications with the following features: OData client that enables CRUD operations including batching and metadata support using both ATOM and JSON payloads. Single store abstraction that provides a common API on top of HTML5 local storage technologies. Data cache component that allows reading data ranges from a collection and storing them locally to reduce the number of network requests. Changes...Coding4Fun Tools: Coding4Fun.Phone.Toolkit v1.4.4: Fix for http://coding4fun.codeplex.com/workitem/6869 was incomplete. Back button wouldn't return app bar. Corrected now. High impact bugSiteMap Editor for Microsoft Dynamics CRM 2011: SiteMap Editor (1.0.528.279): Added keyboard shortcuts: - Cut (CTRL+X) - Copy (CTRL+C) - Paste (CTRL+V) - Delete (CTRL+D) - Move up (CTRL+UP ARROW) - Move down (CTRL+DOWN ARROW) Added ability to save/load SiteMap from/to a Xml file on disk Bug fix: - Connect to a server through the status bar was throwing error "Object Reference not set to an instance of an object" - Rename TreeNode.Name after changing TreeNode.TextMicrosoft - Domain Oriented N-Layered .NET 4.0 App Sample: V2.01 ALPHA N-Layered SampleApp .NET 4.0 and EF4.1: V2.0.01 - ALPHARequired Software (Microsoft Base Software needed for Development environment) Visual Studio 2010 RTM & .NET 4.0 RTM (Final Versions) Expression Blend 4 SQL Server 2008 R2 Express/Standard/Enterprise Unity Application Block 2.0 - Published May 5th 2010 http://www.microsoft.com/downloads/en/details.aspx?FamilyID=2D24F179-E0A6-49D7-89C4-5B67D939F91B&displaylang=en http://unity.codeplex.com/releases/view/31277 PEX & MOLES 0.94.51023.0, 29/Oct/2010 - Visual Studio 2010 Power ...Mosaic Project: Mosaic Alpha build 261: - Fixed crash when pinning applications in x64 OS - Added Hub to video widget. It shows videos from Video library (only .wmv and .avi). Can work slow if there are too much files. - Fixed some issues with scrolling - Fixed bug with html widgets - Fixed bug in Gmail widget - Added html today widget missed in previous release - Now Mosaic saves running widgets if you restarting from optionsEnhSim: EnhSim 2.4.9 BETA: 2.4.9 BETAThis release supports WoW patch 4.2 at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Added in some of th....NET Reflector Add-Ins: Reflector V7 Add-Ins: All the add-ins compiled for Reflector V7TerrariViewer: TerrariViewer v4.1 [4.0 Bug Fixes]: Version 4.1 ChangelogChanged how users will Open Player files (This change makes it much easier) This allowed me to remove the "Current player file" labels that were present Changed file control icons Added submit bug button Various Bug Fixes Fixed crashes related to clicking on buffs before a character is loaded Fixed crashes related to selecting "No Buff" when choosing a new buff Fixed crashes related to clicking on a "Max" button on the buff tab before a character is loaded Cor...AcDown????? - Anime&Comic Downloader: AcDown????? v3.0 Beta8: ??AcDown???????????????,?????????????????????。????????????????????,??Acfun、Bilibili、???、???、?????,???????????、???????。 AcDown???????????????????????????,???,???????????????????。 AcDown???????C#??,?????"Acfun?????"。 ????32??64? Windows XP/Vista/7 ????????????? ??:????????Windows XP???,?????????.NET Framework 2.0???(x86)?.NET Framework 2.0???(x64),?????"?????????"??? ??????????????,??????????: ??"AcDown?????"????????? ??v3.0 Beta8 ?? ??????????????? ???????????????(??????????) ???????...BlogEngine.NET: BlogEngine.NET 2.5: Get DotNetBlogEngine for 3 Months Free! Click Here for More Info 3 Months FREE – BlogEngine.NET Hosting – Click Here! If you want to set up and start using BlogEngine.NET right away, you should download the Web project. If you want to extend or modify BlogEngine.NET, you should download the source code. If you are upgrading from a previous version of BlogEngine.NET, please take a look at the Upgrading to BlogEngine.NET 2.5 instructions. To get started, be sure to check out our installatio...PHP Manager for IIS: PHP Manager 1.2 for IIS 7: This release contains all the functionality available in 62183 plus the following additions: Command Line Support via PowerShell - now it is possible to manage and script PHP installations on IIS by using Windows PowerShell. More information is available at Managing PHP installations with PHP Manager command line. Detection and alert when using local PHP handler - if a web site or a directory has a local copy of PHP handler mapping then the configuration changes made on upper configuration ...MiniTwitter: 1.71: MiniTwitter 1.71 ???? ?? OAuth ???????????? ????????、??????????????????? ???????????????????????SizeOnDisk: 1.0.10.0: Fix: issue 327: size format error when save settings Fix: some UI bindings trouble (sorting, refresh) Fix: user settings file deletion when corrupted Feature: TreeView virtualization (better speed with many folders) Feature: New file type DataGrid column Feature: In KByte view, show size of file < 1024B and > 0 with 3 decimal Feature: New language: Italian Task: Cleanup for speedRawr: Rawr 4.2.0: This is the Downloadable WPF version of Rawr!For web-based version see http://elitistjerks.com/rawr.php You can find the version notes at: http://rawr.codeplex.com/wikipage?title=VersionNotes Rawr AddonWe now have a Rawr Official Addon for in-game exporting and importing of character data hosted on Curse. The Addon does not perform calculations like Rawr, it simply shows your exported Rawr data in wow tooltips and lets you export your character to Rawr (including bag and bank items) like Char...N2 CMS: 2.2: * Web platform installer support available ** Nuget support available What's newDinamico Templates (beta) - an MVC3 & Razor based template pack using the template-first! development paradigm Boilerplate CSS & HTML5 Advanced theming with css comipilation (concrete, dark, roadwork, terracotta) Template-first! development style Content, news, listing, slider, image sizes, search, sitemap, globalization, youtube, google map Display Tokens - replaces text tokens with rendered content (usag...KinectNUI: Jun 25 Alpha Release: Initial public version. No installer needed, just run the EXE.Terraria World Viewer: Version 1.5: Update June 24th Made compatible with the new tiles found in Terraria 1.0.5New Projects{Adjunct} functionality for the .NET framework: A project to provide Ingots for the .NET framework.3Webee.net: 3Webee.net is the First Navigator dedicated to Web.3.0 by P2P. Developped in C# for DotNet-3.5 or Mono.net, compatible with Linux ready. Website.fr : http://3webee.net/ Download Win32 : http://3webee.net/Download/3Webee.net.beta.0.0.Win32.exe AB Donor Choose Planner: The goal of this doantion planner is to allow you to coordinate the completion of one or more Donors Choose projects. The tool gives you a portfolio view of the donations you would like to invest in by targeting your investments in a location/regional focused manner.appperu1: asdasdsaddas: ColinTestingasdfFindClone: Find clone files, find duplicate files, remove duplicate filesfirstcpapp: This is my appForecast Parser: The NOAA hosts forecast data accessible over the web. These libraries download and parse seven day hourly forecast data and encapsulates the data in an easy to use class.Future Apple Osx: Future Apple Osx, Is a free operating system to use. It was built from the ground up with the help of Cosmos. It is free to use and download. So please check it out today.Glimpse: Glimpse is a web debugger and diagnostics tool for ASP.NET and ASP.NET MVC. You can find out more at getGlimpse.comiAdm: ?? iToday ??? wince 6 R2 ?????ImagineCup Worldwide Finals Tracker: An open-source Windows Phone application that is used to track the events going on at the ImagineCup Worldwide Finals.John Owl: John OwlLAM - Local Area Messaging: A VB.NET local area chat application. Finds the lan clients and communicates through the lan with old Ms-Winsock Interop.MessyBrain: Organize your tasks in an efficient way. Assign tasks to members of your team. Create workflows for your team. Written in C# and ASP.NET MVC. Why did I start this project? Making mistakes is part of the learning process. They can be painful especially when they are made at work; there’s a cost attached to it. Why not start a project on my own? Mistakes will be less painful (only my ego will be damaged), I learn something new and there isn’t a cost attached to it. I can share the code ...Navigation Light Toolkit: Navigation Light add support for View Navigation in WPF and SilverlightRight Click Calculator: a mini calculator with numpad that opens in a dialogbox. it can combined with a textbox. bir textbox üzerinde sag tus ile açabileceginiz ufak bir hesap makinesi örnegi.Shaaps & Ladders: It's a modern software implementation of the popular classic board game Snakes & Ladders. The Bengali translation of "Snakes" pronounces "Shaaps" and thus the name of the game is such. The game is being developed on top of the Shaaps & Ladders GDK. Source for both are released.SharePoint PowerShell Scripts: Usefull PowerShell scripts written for SharePoint that helps organizations with governance.Smith Web Tools: Smith Web Tools are some useful controls to help to build web application. They are written in pure JavaScript and CSS without introducing any other JavaScript framework. At present, the Smith Calendar, Smith Editor, and Smith Dialog are available.SSAS Query Log Decoder & Analyzer: The Crisp description for the project will be "CUBE FOR CUBE". This is an end-to-end BI solution for analyzing the Query log created by SSAS Server. The Query Log data is loaded into a dimensional model and a cube is built on top of it for analysis of cube usage.takcandmansys: takcandmansysTestHG1: TestHG1TESTProjHG: TESTProjHGTestTFS1: TestTFS1TESTTFSAAA: TESTTFSAAATower: tower showTransit Feed Generator: Library for help the integration with Google Transit. This library generates the zipped file with data for Google Transit Feed, in the GTFS formatVRE Collaborator Search Kit for SharePoint 2010: VRE Collaborator Search Kit for SharePoint 2010VRE Content Archiving Kit for SharePoint 2010: VRE Content Archiving Kit for SharePoint 2010VRE Document Review Workflow Kit for SharePoint 2010: VRE Document Review Workflow Kit for SharePoint 2010 VRE Literature Review Kit for SharePoint 2010: VRE Literature Review Kit for SharePoint 2010 VRE Researcher and Project Templates for SharePoint 2010: VRE Researcher and Project Templates for SharePoint 2010 VRE RSS Feeds Kit for SharePoint 2010: VRE RSS Feeds Kit for SharePoint 2010 VRE User Administration (FBA) Kit for SharePoint 2010: VRE User Administration (FBA) Kit for SharePoint 2010 WebPart Collapser: WebPart Collapser is a lightweight, customizable jQuery plugin for SharePoint 2007 that allows visitors to expand/collapse WebParts. Through the use of cookies, the collapsed state of any webparts will be saved and collapsed each time a user visits a page. WPF Hex Editor: hex editor which is created with WPF with a xaml designed UI.Xoorscript: A proprietary scripting language created by Jared Thomson for the purpose of script defining an easy to use make system. The plans for this project are minimal for now, but if things go well I may expand it. This is low priority for me.

    Read the article

  • CodePlex Daily Summary for Monday, December 13, 2010

    CodePlex Daily Summary for Monday, December 13, 2010Popular ReleasesRequest Tracker Data Access: 1.0.0.0: First releaseMicrosoft All-In-One Code Framework: All-In-One Code Framework 2010-12-13: Improved and Newly Added Examples:For an up-to-date code sample index, please refer to All-In-One Code Framework Sample Catalog. NEW Samples for ASP.NET Name Description Owner CSASPNETCMD Run batch/cmd from ASP.NET (C#) YiXiang VBASPNETCMD Run batch/cmd from ASP.NET (VB) YiXiang VBASPNETAJAXWebChat Ajax web chat application (VB) JerryWeng CSASPNETAJAXWebChat Ajax web chat application (C#) JerryWeng CSASPNETCurrentOnlineUserList Get current online u...Wii Backup Fusion: Wii Backup Fusion 0.9 Beta: - Aqua or brushed metal style for Mac OS X - Shows selection count beside ID - Game list selection mode via settings - Compare Files <-> WBFS game lists - Verify game images/DVD/WBFS - WIT command line for log (via settings) - Cancel possibility for loading games process - Progress infos while loading games - Localization for dates - UTF-8 support - Shortcuts added - View game infos in browser - Transfer infos for log - All transfer routines rewritten - Extract image from image/WBFS - Support....NETTER Code Starter Pack: v1.0.beta: '.NETTER Code Starter Pack ' contains a gallery of Visual Studio 2010 solutions leveraging latest and new technologies and frameworks based on Microsoft .NET Framework. Each Visual Studio solution included here is focused to provide a very simple starting point for cutting edge development technologies and framework, using well known Northwind database (for database driven scenarios). The current release of this project includes starter samples for the following technologies: ASP.NET Dynamic...WPF Multiple Document Interface (MDI): Beta Release v1.1: WPF.MDI is a library to imitate the traditional Windows Forms Multiple Document Interface (MDI) features in WPF. This is Beta release, means there's still work to do. Please provide feedback, so next release will be better. Features: Position dependency property MdiLayout dependency property Menu dependency property Ctrl + F4, Ctrl + Tab shortcuts should work Behavior: don’t allow negative values for MdiChild position minimized windows: remember position, tile multiple windows, ...SQL Server PowerShell Extensions: 2.3.1 Production: Release 2.3.1 implements SQLPSX as PowersShell version 2.0 modules. SQLPSX consists of 12 modules with 155 advanced functions, 2 cmdlets and 7 scripts for working with ADO.NET, SMO, Agent, RMO, SSIS, SQL script files, PBM, Performance Counters, SQLProfiler and using Powershell ISE as a SQL and Oracle query tool. In addition optional backend databases and SQL Server Reporting Services 2008 reports are provided with SQLServer and PBM modules. See readme file for details.EnhSim: EnhSim 2.2.1 ALPHA: 2.2.1 ALPHAThis release adds in the changes for 4.03a. at level 85 To use this release, you must have the Microsoft Visual C++ 2010 Redistributable Package installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=A7B7A05E-6DE6-4D3A-A423-37BF0912DB84 To use the GUI you must have the .NET 4.0 Framework installed. This can be downloaded from http://www.microsoft.com/downloads/en/details.aspx?FamilyID=9cfb2d51-5ff4-4491-b0e5-b386f32c0992 - Updated th...NuGet (formerly NuPack): NuGet 1.0 Release Candidate: NuGet is a free, open source developer focused package management system for the .NET platform intent on simplifying the process of incorporating third party libraries into a .NET application during development. This release is a Visual Studio 2010 extension and contains the the Package Manager Console and the Add Package Dialog. This new build targets the newer feed (http://go.microsoft.com/fwlink/?LinkID=206669) and package format. See http://nupack.codeplex.com/documentation?title=Nuspe...Free Silverlight & WPF Chart Control - Visifire: Visifire Silverlight, WPF Charts v3.6.5 Released: Hi, Today we are releasing final version of Visifire, v3.6.5 with the following new feature: * New property AutoFitToPlotArea has been introduced in DataSeries. AutoFitToPlotArea will bring bubbles inside the PlotArea in order to avoid clipping of bubbles in bubble chart. You can visit Visifire documentation to know more. http://www.visifire.com/visifirechartsdocumentation.php Also this release includes few bug fixes: * Chart threw exception while adding new Axis in Chart using Vi...PHPExcel: PHPExcel 1.7.5 Production: DonationsDonate via PayPal via PayPal. If you want to, we can also add your name / company on our Donation Acknowledgements page. PEAR channelWe now also have a full PEAR channel! Here's how to use it: New installation: pear channel-discover pear.pearplex.net pear install pearplex/PHPExcel Or if you've already installed PHPExcel before: pear upgrade pearplex/PHPExcel The official page can be found at http://pearplex.net. Want to contribute?Please refer the Contribute page.??????????: All-In-One Code Framework ??? 2010-12-10: ?????All-In-One Code Framework(??) 2010?12??????!!http://i3.codeplex.com/Project/Download/FileDownload.aspx?ProjectName=1code&DownloadId=128165 ?????release?,???????ASP.NET, WinForm, Silverlight????12?Sample Code。???,??????????sample code。 ?????:http://blog.csdn.net/sjb5201/archive/2010/12/13/6072675.aspx ??,??????MSDN????????????。 http://social.msdn.microsoft.com/Forums/zh-CN/codezhchs/threads ?????????????????,??Email ????DNN Simple Article: DNNSimpleArticle Module V00.00.03: The initial release of the DNNSimpleArticle module (labelled V00.00.03) There are C# and VB versions of this module for this initial release. No promises that going forward there will be packages for both languages provided for future releases. This module provides the following functionality Create and display articles Display a paged list of articles Articles get created as DNN ContentItems Categorization provided through DNN Taxonomy SEO functionality for article display providi...UOB & ME: UOB_ME 2.5: latest versionAutoLoL: AutoLoL v1.4.3: AutoLoL now supports importing the build pages from Mobafire.com as well! Just insert the url to the build and voila. (For example: http://www.mobafire.com/league-of-legends/build/unforgivens-guide-how-to-build-a-successful-mordekaiser-24061) Stable release of AutoChat (It is still recommended to use with caution and to read the documentation) It is now possible to associate *.lolm files with AutoLoL to quickly open them The selected spells are now displayed in the masteries tab for qu...PHP Manager for IIS: PHP Manager 1.1 for IIS 7: This is a final stable release of PHP Manager 1.1 for IIS 7. This is a minor incremental release that contains all the functionality available in 53121 plus additional features listed below: Improved detection logic for existing PHP installations. Now PHP Manager detects the location to php.ini file in accordance to the PHP specifications Configuring date.timezone. PHP Manager can automatically set the date.timezone directive which is required to be set starting from PHP 5.3 Ability to ...Algorithmia: Algorithmia 1.1: Algorithmia v1.1, released on December 8th, 2010.My Web Pages Starter Kit: 1.3.1 Production Release (Security HOTFIX): Due to a critical security issue, it's strongly advised to update the My Web Pages Starter Kit to this version. Possible attackers could misuse the image upload to transmit any type of file to the website. If you already have a running version of My Web Pages Starter Kit 1.3.0, you can just replace the ftb.imagegallery.aspx file in the root directory with the one attached to this release.ASP.NET MVC Project Awesome (jQuery Ajax helpers): 1.4: A rich set of helpers (controls) that you can use to build highly responsive and interactive Ajax-enabled Web applications. These helpers include Autocomplete, AjaxDropdown, Lookup, Confirm Dialog, Popup Form, Popup and Pager new stuff: popup WhiteSpaceFilterAttribute tested on mozilla, safari, chrome, opera, ie 9b/8/7/6nopCommerce. ASP.NET open source shopping cart: nopCommerce 1.90: To see the full list of fixes and changes please visit the release notes page (http://www.nopCommerce.com/releasenotes.aspx).TweetSharp: TweetSharp v2.0.0.0 - Preview 4: Documentation for this release may be found at http://tweetsharp.codeplex.com/wikipage?title=UserGuide&referringTitle=Documentation. Note: This code is currently preview quality. Preview 4 ChangesReintroduced fluent interface support via satellite assembly Added entities support, entity segmentation, and ITweetable/ITweeter interfaces for client development Numerous fixes reported by preview users Preview 3 ChangesNumerous fixes and improvements to core engine Twitter API coverage: a...New Projects.NET Tips Repository: This project is the source code repository for all the projects, samples, and tutorials posted at vahidnasiri.blogspot.com. Its main focus is on .NET programming.a hash implement by basic array and link list: a hash implement by basic array and link listApplication Essentials for WPF, Silverlight, and Windows Phone 7: Application essentials is a simplified, small footprint redux of the Structured MVVM and Color Blending projects and is used to build WPF, Silverlight, and Windows Phone 7 applications with an MVVM architecture.Bit.ly Button: Bit.ly Button lets you use the power of Bit.ly bookmarklet to shorten any webpage (especially on sites like Facebook and Twitter). It's like a sharing button, except it will shorten the link before you share on Facebook or Twitter.Check Dependency: Check Dependency is designed to identify the dependency problems in assemblies. It is a valuable assistant to a project hat has complex dependency in many assemblies.Circo: A product oriented towards the need of having a powerful tool improving the construction process of applications. User interface for creating Entity Dictionary, generating .Net classes and also SQL model. It provides a strong productivity oriented.CoralCubeDB: This is the db for coralcube.Dotnet.Samples: Microsoft® .NET™ sample projects Created by Nano Taboada under a MIT License All projects have been coded using Microsoft(R) Visual Studio(R) 2010 mostly targeting framework version 4.0 Get a free copy of Visual C# 2010 Express at http://tinyurl.com/visualstudio2010expressElasticity: An library implementation of the Scheduler-Agent-Supervisor pattern. http://vasters.com/clemensv/2010/09/28/Cloud+Architecture+The+SchedulerAgentSupervisor+Pattern.aspxFacebook Graph Toolkit: get Graph API in ASP.NET.Grabbers: An object relational library and code generator designed to assist agile development teams generate data aware objects. InSimSniffer: InSimSniffer is a InSim packet sniffer for the racing simulator Live for Speed. It allows programmers to view and debug packets sent by the game.Irrlicht Wrapper for D: A D wrapper for the Irrlicht game engine generated by SWIG.Linq to LDAP: Linq provider built on top of System.DirectoryServices.Protocols for querying LDAP servers.ME Video Player: ME Video Player makes it easier for web developers to present medis on web pages. It's developed in C# and Silverlight by Mahyar Esteki.Mladi.com.hr: CMS system for croatian youth portalMouse Practise: A small project that creates a game to train a beginner to use mouse. Developer's Blog : http://shekhar-pro.blogspot.com Follow on Twitter : http://twitter.com/samajshekharMVVMKit: MVVMKit makes it easier to create WPF applications using the MVVM pattern.mygully-searcher: MyGully-Searcher makes it easier for Mygully-Forum-Users to search the forums for downloads. You'll no longer have to click to all forums. It's developed in VB.Net.NBooks Accounting: A simple clone to Quickbooks.Projeto Teste do curso de Pós graduação em Engenharia de Software.: Projeto teste do curso de pós graduação em Engenharia de Software. Códigos exemplos em Javascript e outros. Nayanne Araújo Bonifácio.Razor Reports - a Visualizer for the DotNetNuke Reports Module: Razor Reports is a Visualizer for the DotNetNuke Reports ModuleSiteGrabber: Groepsopdracht 2Supermarket: Hat: tTheSharePage: Project contains the core library for use in my website that i am developing for my NIIT project work. (The website will integrate facebook and twitter in a single website) The library features full custom developed facebook and twitter sdk library that can even be reused.Tip Of Day SharePoint WebPart: Tip Of Day webpartTranslit Hebrew to Russian: Application, which can translit Hebrew text into Russian.WP7 Thai Text Input: WP7 Thai text input makes it possible to enter Thai characters in WP7. It's developed in C# and were used in some of the CoreSharp's WP7 apps.

    Read the article

< Previous Page | 426 427 428 429 430 431 432 433 434 435 436 437  | Next Page >