Search Results

Search found 22756 results on 911 pages for 'cisco vpn client'.

Page 431/911 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

  • configuring vsftpd anonymous upload. Creates files but freezes at 0 bytes

    - by Wayne
    vsftpd on ubuntu after sudo apt-get install vsftpd Then did configuration as in the attached /etc/vsftpd.conf file. Anonymous ftp allows cd to the upload directly and allows put myfile.txt which gets created on the server but then the client hangs and never proceeds. The file on the server remains at 0 bytes. Here's the folders and permissions: root@support:/home/ftp# ls -ld . drwxr-xr-x 3 root root 4096 Jun 22 00:00 . root@support:/home/ftp# ls -ld pub drwxr-xr-x 3 root root 4096 Jun 21 23:59 pub root@support:/home/ftp# ls -ld pub/upload drwxr-xr-x 2 ftp ftp 4096 Jun 22 00:06 pub/upload root@support:/home/ftp# Here's the vsftpd.conf file: root@support:/home/ftp# grep -v '#' /etc/vsftpd.conf listen=YES anonymous_enable=YES write_enable=YES anon_upload_enable=YES dirmessage_enable=YES xferlog_enable=YES anon_root=/home/ftp/pub/ connect_from_port_20=YES chown_uploads=YES chown_username=ftp nopriv_user=ftp secure_chroot_dir=/var/run/vsftpd pam_service_name=vsftpd rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key Here's a file example that attempted to upload: root@support:/home/ftp/pub/upload# ls -l total 0 -rw------- 1 ftp nogroup 0 Jun 22 00:06 build.out This is the client attempting to upload...it is frozen at this point: $ ftp 173.203.89.78 Connected to 173.203.89.78. 220 (vsFTPd 2.0.6) User (173.203.89.78:(none)): ftp 331 Please specify the password. Password: 230 Login successful. ftp> put build.out 200 PORT command successful. Consider using PASV. 553 Could not create file. ftp> cd upload 250 Directory successfully changed. ftp> put build.out 200 PORT command successful. Consider using PASV. 150 Ok to send data.

    Read the article

  • Ubuntu 12.04 - Pound Reverse Proxy and Adobe Flex/Flash Auth

    - by James
    First time posting, I have a completely fresh install of ubuntu 12.04 Client as a reverse proxy gateway to our internal network. Our setup is we have one external ip but three domains we would like to point to various webservers on our internal network. It's not so much a load balancing issue or cacheing etc. Merely routing some Client browsers to a port 80 webpage (to adhere to some stricter corporate policies regarding placing port numbers after domain names). I have gone with pound and everything seems to be working fine. Static pages load etc. Everything is good with the exception of a Flash/Flex based WebClient for a Digital Asset Management program. The actual static page loads fine, it is just at the moment of entering credentials, be they correct or incorrect, and hitting login, there is no response whatsoever. Either a rejection or confirmation etc. So the request back to the internal server can't be getting through. I have googled extensively and there might be a solution in a crossdomain.xml file? Documentation isn't very clear. And we are not the authors of the DAM app, and have no control over the code on the Flash/Flex side. Questions: Is there a particular config file/solution for pound that allows Flash/Flex auth information to be forwarded? Is there another reverse proxy program (nginx?)that allows this type of config? Am I looking at this the entire wrong way, should Flash/Flex fundamentally not be allowed to have this access?

    Read the article

  • pam debugging "check pass; user unknown"

    - by lvc
    I am attempting to get Prosody authenticating with its auth_pam module. It is configured to use the pam service name xmpp. The pam.d/xmpp file is copied straight from the one configured for dovecot (originally taken from, I think, dovecot's documentation), which is known to be working: # cat /etc/pam.d/xmpp auth required pam_unix.so nullok debug account required pam_unix.so debug Logging in with dovecot works wonderfully. Logging in with prosody, with exactly the same username and password, causes Prosody to return 'Not authorized', and the following in journalctl -f: Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Client sent opening <stream:stream> to riscque.net Oct 29 22:12:14 riscque.net prosody[9396]: c2s1d010b0: Sent reply <stream:stream> to client Oct 29 22:12:14 riscque.net prosody[9396]: [178B blob data] Oct 29 22:12:14 riscque.net unix_chkpwd[9408]: check pass; user unknown Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): conversation failed Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): unable to obtain a password Oct 29 22:12:14 riscque.net prosody[9396]: pam_unix(xmpp:auth): auth could not identify password for [lvc] Oct 29 22:12:14 riscque.net prosody[9396]: riscque.net:saslauth: sasl reply: <failure xmlns='urn:ietf:params:xml:ns:xmpp-sasl'><not-authorized/><text>Unable to authorize you with the authentication credentials you&apos;ve sent.</text></failure> This series of errors seems mutually contradictory - first it says "user unknown", but then that it can't obtain the password for lvc - this username certainly exists on the system. What is likely going on here, and how would I debug this further?

    Read the article

  • sorry, the maximum allowed clients from your host (10) are already connected" FTP error

    - by Sejanus
    Hello, I keep getting the "sorry, the maximum allowed clients from your host (10) are already connected" error whenever I try to transfer a large number of files. At first I thought it's a filezilla bug, however I get the same error basically with every FTP client I've tried, including Total Commander under Wine. I do not get that error using Windows. I did try to limit maximum allowed connections for Filezilla, both in server settings and in global settings, it didnt change anything. I did try to switch between passive and active modes (not sure if it's related at all, just last desperate attempt), and it didnt change anything either. When I try to use native ftp client (not sure how is it called, the one in Places - Connect to a server) I get abstract "connection refused" error every time I transfer large number of files. Connection is refused for separate particular files, if I click "Ignore" each time the rest of files are transfered perfectly well, so I assume it's the very same error. Anything I could do? This really drives me mad, transfering large numbers of files is a part of my everyday job... P.S. and this happens with many different FTP servers. Also I dont get this error in Windows. So I assume it's not a server problem. P.P.S. I am aware of similar question here, the answer provided just didn't solve it to me.

    Read the article

  • Looking for Inneroffice Access Tool, Workstation to Workstation

    - by nicorellius
    This may be a simple question to answer, and I apologize if it's a duplicate. I looked through the suggestions and nothing jumped out at me as the right answer, so here goes: My office has several workstations, Macs and Windows boxes. We do have a firewall and a VPN solution, so getting in to the network from outside is easy. Likewise, we use GoToMeeting for demos and when we help our customers with their issues. But we have one workstation that has certain testing tools on it, and instead of walking across the office to this machine, I'd like to access it from my desk (and monitor it). I will need to open a command line and run commands. I could start a GoToMeeting and do it this way, but that seems overkill and clunky. Is there a simpler tool that allows pseudo-remote access within the same office/network for this kind of access?

    Read the article

  • chef clients behind firewall

    - by tec
    I am currently learning about chef. What I understood so far: I have to install chef-server on an own server or use the hosted chef. I have to install chef-client on the servers that I want to manage aka nodes (manually or using knife bootstrap). I installed several chef tools on my own PC that I can use to manage the nodes, e.g. knife. Now in my case the specialty is that the nodes are behind a firewall/load balancer/proxy. The nodes can access servers on the outside via NAT (http works and I can configure chef-specific hosts to work as well). However they can only be contacted from the outside via a ssh tunnel. There is really much documentation about chef available but I did not find an answer to these questions: When using knife, is it enough when I set up a ssh tunnel manually on my own PC or does the chef server need to contact the nodes? When using knife, can I configure it to setup a ssh tunnel automatically? When using the chef server web ui can I configure it to connect to the nodes via ssh tunnel or do I need a setup where I setup the tunnel myself e.g. using monit? Is this even possible with hosted chef? Instead of using knife or the web ui: Can I issue the same management commands directly on the nodes using chef-client? What solution would you recommend? Thanks a lot for taking your time to help and answering one or more of these related questions

    Read the article

  • PXE boot -- kernel not found on TFTP server

    - by user70523
    I followed the following link for PXE boot, http://www.howtoforge.com/setting-up-a-pxe-install-server-on-ubuntu-9.10-p3 and I was able to ping the client from the server and also when I booted up the client It is getting the IP address from the server. But later,I got this error PXELinux 3.82 2009-06-09 . . . [other informations] !PXE Entry point found (we hope) at 9D3B:0109 via plan A UNDI code segment at 9D3B len 16C2 UNDI data segment at 933B len A000 Getting cached packet 01 02 03 . . . [other informations] TFTP prefix: Trying to load: pxelinux.cfg/ec5db4c0-74fe-d511-b9e7-3d9235afe5a1 Trying to load: pxelinux.cfg/01-00-17-31-b6-5e-a8 Trying to load: pxelinux.cfg/0A64491E Trying to load: pxelinux.cfg/0A64491 Trying to load: pxelinux.cfg/0A6449 Trying to load: pxelinux.cfg/0A644 Trying to load: pxelinux.cfg/0A64 Trying to load: pxelinux.cfg/0A6 Trying to load: pxelinux.cfg/0A Trying to load: pxelinux.cfg/0 Trying to load: pxelinux.cfg/default Unable to locate configuration file Boot failed: press a key to retry or wait for reset I have put all the files mentioned in the link in tftpboot. Can anyone explain what could be the problem. Thanks in advance

    Read the article

  • Running CGI With Perl under Apache Permission Problem

    - by neversaint
    I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /cgi-bin/ /var/www/mychosendir/cgi-bin/ <Directory /var/www/mychosendir/cgi-bin> Options +ExecCGI -Indexes allow from all </Directory> Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] (8)Exec format error: exec of '/var/www/mychosendir/cgi-bin/test.cgi' failed [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] Premature end of script headers: test.cgi What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> And the content of test.cgi is this: #!/usr/bin/perl -wT print "Content-type: text/html\n\n"; print "Hello, world!\n";

    Read the article

  • Running CGI With Perl under Apache Permission Problem

    - by neversaint
    I have the following entry under apache2.conf in my Debian box. AddHandler cgi-script .cgi .pl Options +ExecCGI ScriptAlias /mychosendir/cgi-bin/ /var/www/mychosendir/cgi-bin/ <Directory /var/www/mychosendir/cgi-bin> Options +ExecCGI -Indexes allow from all </Directory> Then I have a perl cgi script stored under these directories and permissions: nvs@somename:/var/www/mychosendir$ ls -lhR .: total 12K drwxr-xr-x 2 nvs nvs 4.0K 2010-04-21 13:42 cgi-bin ./cgi-bin: total 4.0K -rwxr-xr-x 1 nvs nvs 90 2010-04-21 13:40 test.cgi However when I tried to access it in the web browser: http://myhost.com/mychosendir/cgi-bin/test.cgi They gave me this error: [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] (8)Exec format error: exec of '/var/www/mychosendir/cgi-bin/test.cgi' failed [Wed Apr 21 15:26:09 2010] [error] [client 150.82.219.158] Premature end of script headers: test.cgi What's wrong with it? Update: I also have the following entry in my apache2.conf: <Files ~ "^\.ht"> Order allow,deny Deny from all </Files> And the content of test.cgi is this: #!/usr/bin/perl -wT print "Content-type: text/html\n\n"; print "Hello, world!\n";

    Read the article

  • Shareing two internet connections on my laptop running Windows XP

    - by ashwnacharya
    I have two internet connections, one is internet via our organization's corporate LAN network, and the other one is mobile broadband via a USB modem Is there anyway I can share internet connections and use them simultaneously? I want to use the corporate LAN network for normal browsing and connecting my email client, and I want to use the USB modem for establishing a VPN connection. Will I be able to maintain both the connections simultaneously? Can I have parallel downloads, one using our corporate network, and the other one using the mobile broadband? Will I be able to switch my browser between these two connections? My laptop runs Windows XP Service Pack 2.

    Read the article

  • Stop Windows Domain Environment Caching Old Passwords?

    - by Daryl Gill
    I have noticed on my domain environment; the old Administrator password (before password expire).. The client machines have cached the old password and have the ability to bypass the new password by entering the old one..? I have noticed on my domain environment; the old Administrator password (before password expire).. The client machines have cached the old password and have the ability to bypass the new password by entering the old one..? Basically; I'm running a UAC enabled domain, which needs the administrator password to continue basic stuff; installations and such. The password for the administrator account has been changed due to expiration of said accounts password. By accident a fellow administrator typed the old password and still bypassed the UAC with what should have been the incorrect password. Is this a bug with the environment? or something that needs to be tweaked in the server sided settings? Is this a bug with the environment? or something that needs to be tweaked in the server sided settings?

    Read the article

  • Squid site redirection

    - by AndyM
    I have an internal website that cannot be accessed from some machines on my network, due to the physical location, VPN ,network ranges etc. I would like to install Squid on "in between" network to forward request from the clients that cannot reach the website. The issue is the clients have no ability to connect to www.example.com , but they can reach a network with a squid proxy , which in turn can reach www.example.com What is the correct term I need to research in squid , is it just caching www.example.com or do I need to set the clients to use a URL that gets rewritten ? i.e www.squid-example.com -- www.example.com

    Read the article

  • Quick access to program shortcut

    - by Nathan DeWitt
    I need to edit a text file on my computer that requires admin access (hosts). I used to do this by hitting WIN and typing "Note". The shortcut for Notepad would show up, and I could right-click and choose Run as Administrator. How do I accomplish the same thing in Windows 8? Notepad isn't something I see pinned to my start menu, and I don't really want to clutter up my menu with something I may use infrequently. I want very quick access to my programs by typing a few letters in the name. If I use WIN-R, I have to know exactly the name of the executable. I want to just type Glob and see options for Sonic Global VPN. And I want to be able to execute that found executable as an admin if I need to. Windows Vista & Windows 7 are excellent at this. Surely this functionality has not been deprecated in Windows 8...

    Read the article

  • NFSv4 "Too many levels of symbolic links" error

    - by user1434058
    Both machines are running Ubuntu 12.04 Remote NFSv4 Client $ ls /mnt/storage/aaaaaaa_aaa/bbbb/cccc_ccccc gives this error: ls: reading directory .: Too many levels of symbolic links How can I fix this? When error occurs ls start listing the files, however PHP brakes. On the NFSv4 Server In /etc/fstab: /mnt/storage /srv/storage none bind 0 0 In /etc/exports /srv 192.168.1.0/24(rw,async,insecure,no_subtree_check,crossmnt,fsid=0,no_root_squash) /srv/storage 192.168.1.0/24(rw,async,nohide,insecure,no_subtree_check,no_root_squash) ERROR root@ds:root@ds:/mnt/storage/foreign_dbs/imdb/imdb_htmls# ls -l | head ls: reading directory .: Too many levels of symbolic links total 10302840 -rw-r--r-- 1 root root 10484 Jul 5 13:56 0019038.gz -rw-r--r-- 1 root root 16264 Mar 30 00:31 0259701.gz -rw-r--r-- 1 root root 13784 Mar 30 14:20 1000000.gz -rw-r--r-- 1 root root 12741 Mar 30 13:04 1000003.gz -rw-r--r-- 1 root root 12794 Mar 30 12:40 1000004.gz -rw-r--r-- 1 root root 13123 Mar 30 12:07 1000005.gz -rw-r--r-- 1 root root 13183 Mar 30 12:04 1000006.gz -rw-r--r-- 1 root root 13443 Jul 4 01:16 1000007.gz -rw-r--r-- 1 root root 12968 Mar 30 11:05 1000008.gz I came across it in PHP. scandir would return 1612577.gz & 1612579.gz, but skips 1612578.gz and yet the file types and properties are identical on them and this only happens on the nfs client, works 100% on the server

    Read the article

  • Why would I be getting IXFR and AXFR transfer denied on my DNS server?

    - by danielj
    From everything I've researched and tried, it appears that my named.conf is configured correctly, including the allow-transfer section. Here is a sample of the errors. It is only happening with a couple of my secondary servers, but it is happening for every zone for those servers that are failing. One of the servers is attempting IXFR, the other AXFR. The result is the same: 18-Mar-2011 14:27:51.372 security: error: client 84.234.24.90#59208: zone transfer 'juansgaranton.com/IXFR/IN' denied 18-Mar-2011 14:32:18.015 security: error: client 174.37.196.55#50783: zone transfer 'cheshirecat.net/AXFR/IN' denied Here is the relevant part of named.conf. options { directory "/etc/bind"; pid-file "/var/run/named/named.pid"; files 4096; allow-transfer { 140.186.190.103; 84.234.24.90; 207.246.95.34; 203.20.52.5; 140.186.190.103; 127.0.0.1; 174.37.196.55; }; }; logging { channel "bind" { file "/var/log/bind.log" versions 3; print-time yes; print-severity yes; print-category yes; severity info; }; category lame-servers { null; }; category "default" { "bind"; }; };

    Read the article

  • Server 2008 R2 DNS Lockup / Stops Resolving Internet Names

    - by Richard Maynard
    We've deployed our first 2008 R2 server on a client site which has replaced their existing 2003 DC. This server provides DNS resolution services to all client machines on that site for general internet usage. Since using the 2008 R2 DNS services we have noticed every couple of days the DNS server starts timing out when requests to certain sites are made (google is the only example I can provide at this time although it seems to be larger sites with problems rather than small - CDN compatiblity issue?). When you restart the DNS Server service then resolution returns to normal... just only for a day or so. Is anybody aware of any significant changes to the DNS server architecture or configuration out of the box in R2 that may explain this intermittent behaviour? I have already tried the fix listed here to no avail: http://weblogs.asp.net/owscott/archive/2009/09/15/windows-server-2008-r2-dns-issues.aspx The following PS command prompt info illustrates the issue: PS C:\Users\Administrator.UK> nslookup Default Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 > www.google.com Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 Non-authoritative answer: Name: www.l.google.com Addresses: 66.102.9.99 66.102.9.104 66.102.9.105 66.102.9.103 66.102.9.147 Aliases: www.google.com > www.google.co.uk Server: s8209001.uk.kingdomfaith.com Address: 10.1.3.4 * s8209001.uk.kingdomfaith.com can't find www.google.co.uk: Server failed

    Read the article

  • Active Directory LDAP and user issues (using apache2 for svn access)

    - by CaCl
    I currently have a setup where I work that lets users use their active directory domain logins and passwords to authenticate and authorize access to Subversion. Currently I need to allow application accounts the same access. So our IT group creates application accounts in the active directory for us to use. But they want to be "secure" so they set the "Workstations Allowed" to be only a limited number of workstations. So when an application account hits the apache2 server for authentication they can't login for some reason and I'm having a heck of a time trying to debug. The error logs only show me: [Tue Apr 06 11:24:25 2010] [warn] [client 24.24.24.24] [3469] auth_ldap authenticate: user appuser13 authentication failed; URI /svn [ldap_simple_bind_s() to check user credentials failed][Invalid credentials] [Tue Apr 06 11:24:25 2010] [error] [client 24.24.24.24] user appuser13: authentication failure for "/svn": Password Mismatch I've checked the password numerous times and it appears to be correct but I can't seem to get the user to authenticate properly. Below is a snippet of the apache configuration for ldap: # Auth providers # Active Directory <AuthnProviderAlias ldap ldap1> AuthBasicProvider ldap AuthLDAPURL "ldap://dmain.company.com:389/dc=dmain,dc=company,dc=com?sAMAccountName?sub?(objectClass=*)" AuthLDAPBindDN "CN=svnuser13,OU=Application Accounts,dc=dmain,dc=teradata,dc=com" AuthLDAPBindPassword secret3 </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias ldap ldap2> AuthBasicProvider ldap AuthLDAPURL ldap://diffldapserver:389/dc=specialusers,dc=com?uid </AuthnProviderAlias> # Another set of users from a different group <AuthnProviderAlias file file1> AuthUserFile /var/svn/auth/htpasswd </AuthnProviderAlias> <Location /svn> DAV svn SVNPath /var/svn Satisfy Any Require valid-user AuthType Basic AuthName "SVN Repository" AuthBasicProvider ldap1 file1 ldap2 AuthzSVNAccessFile /var/svn/auth/access AuthzLDAPAuthoritative on Require valid-user </Location> Any help, like tips for debugging is appreciated!

    Read the article

  • Outlook and IMAP - Outlook doesn't allow the Drafts and Trash folders to sync with the respective IMAP folders

    - by Matt
    I'm using Outlook 2007 and Outlook 2010 against an IMAP server (the problem exists across many, like Gmail, you name it). Outlook lets you set your Outlook "Sent" folder to map to the IMAP server's Sent folder (the other choice is to map your Outlook Sent to your Personal Folders Sent) - this is good. When you send a message from Outlook and then look in the sent folder of the IMAP server (e.g. from a different client or from a browser), the messages are there. This is the behavior I want. Outlook does NOT support the same behavior for Drafts and Trash. In both cases, items deleted (or Drafts saved) in Outlook go in to Outlook's local folders and do NOT show on the IMAP server's Trash or Drafts folders. Same problem in reverse. Thunderbird on the other hand does support the proper mapping of Drafts, Sent and Trash. I expected this to be IMAP-specific but it appears to be client specific. What does Outlook implement it this way and is there a workaround?

    Read the article

  • Unable to login to Amazon EC2 compute server

    - by MasterGaurav
    I am unable to login to the EC2 server. Here's the log of the connection-attempt: $ ssh -v -i ec2-key-incoleg-x002.pem [email protected] OpenSSH_5.6p1, OpenSSL 0.9.8p 16 Nov 2010 debug1: Reading configuration data /home/gvaish/.ssh/config debug1: Applying options for * debug1: Connecting to ec2-50-16-0-207.compute-1.amazonaws.com [50.16.0.207] port 22. debug1: Connection established. debug1: identity file ec2-key-incoleg-x002.pem type -1 debug1: identity file ec2-key-incoleg-x002.pem-cert type -1 debug1: identity file /home/gvaish/.ssh/id_rsa type -1 debug1: identity file /home/gvaish/.ssh/id_rsa-cert type -1 debug1: Remote protocol version 2.0, remote software version OpenSSH_5.3 debug1: match: OpenSSH_5.3 pat OpenSSH* debug1: Enabling compatibility mode for protocol 2.0 debug1: Local version string SSH-2.0-OpenSSH_5.6 debug1: SSH2_MSG_KEXINIT sent debug1: SSH2_MSG_KEXINIT received debug1: kex: server->client aes128-ctr hmac-md5 none debug1: kex: client->server aes128-ctr hmac-md5 none debug1: SSH2_MSG_KEX_DH_GEX_REQUEST(1024<1024<8192) sent debug1: expecting SSH2_MSG_KEX_DH_GEX_GROUP debug1: SSH2_MSG_KEX_DH_GEX_INIT sent debug1: expecting SSH2_MSG_KEX_DH_GEX_REPLY debug1: Host 'ec2-50-16-0-207.compute-1.amazonaws.com' is known and matches the RSA host key. debug1: Found key in /home/gvaish/.ssh/known_hosts:8 debug1: ssh_rsa_verify: signature correct debug1: SSH2_MSG_NEWKEYS sent debug1: expecting SSH2_MSG_NEWKEYS debug1: SSH2_MSG_NEWKEYS received debug1: Roaming not allowed by server debug1: SSH2_MSG_SERVICE_REQUEST sent debug1: SSH2_MSG_SERVICE_ACCEPT received debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Trying private key: ec2-key-incoleg-x002.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: Trying private key: /home/gvaish/.ssh/id_rsa debug1: No more authentication methods to try. Permission denied (publickey). What can be the possible reason? How do I fix the issue?

    Read the article

  • RDP and New Accounts

    - by leeand00
    I created a new user account on the domain and added them to the Remote Desktop Users group. I could login just fine locally, but when I logged in remotely I was basically told that I could not login from there using that user. I could login just fine as the administrator or anybody else other than that new account. So I researched it a bit more and found that my setting looked like this on the local machine: So I changed it to Allow connections only from computers running Remote Desktop with Network Level Authentication (NLA). Now when I tried this down at my office I connected with RDP just fine on another computer. But low and behold when I got home and simply try to connect to the machine, I get the message: There has to be some kind of in between setting, or additional setting that I need to change on the user that allows me to connect directly via remote desktop over the VPN. At the moment I can connect by connecting to another computer on the network and then RDPing from there into my machine, but this is not ideal.

    Read the article

  • Symantec Endpoint Protection Virus Definitions

    - by Gus Denton
    I have done some Googling but I cannot get a definitive answer certainly not from the Symantec KB. I have a Virtualised Win 2003R2 server 32bit. It has been provisioned to me with Symantec Endpoint Protection 11.0.62xxx CLIENT (not a definitions server) the directory C:\Program Files\Common Files\Symantec Shared\VirusDefs is 750MB IT doesn't contain .tmp directories so it is NOT a corrupt definitions server. IT does contain directories named with a date pattern YYYYMMDD.xxx Some of these folders are 12 months old and I would like to recover the space. The sysmantect forums are full of this stuff but a lot of the postings contain links back to documents that are not specific to End Point Protection Client. It appears that I should be able to delete the older folders and all will be OK. with a service restart however there is a warning about having Live Update Administrator Installed Firstly I have no idea if I have this installed how to I check and secondly can I just ditch these old files and restart ? Regards Gus Denton Learning and Teaching Uni of New South Wales Sydney Australia For those trying to assist me I thankyou. I have followed some instructions found on the Symantec site and assumed that the response from Nixphoe would resolve my issue. It appears that as I am on a provisioned VM from a central IT unit I cannot run the Symantec commands from the Run prompt as my admin creds to get me in. (smc -stop) Basically I need to claw back some Diskspace from the c: drive which is being filed up with WSUS patches and Symantec files. I have managed to delete one symantec cache through the live update control panel and recovered 470Mb I suppose my last question for those more experienced than myself is, can I simply remove say the two oldest virus definition folders without completely foobaring the End Point protection and the server ? Regards Gus

    Read the article

  • What is a good and safe way of sharing certificates?

    - by Kaustubh P
    I have a few certificates, that are used as authentication, to ssh into my servers on the Amazon cloud. I rotate those certificates weekly, manually. My question is, I need to share the certificates with some colleagues, a few on the LAN, and a few in another part of the country. What is the best practice to share the certificate? My initial thoughts were Dropbox and email. We dont host dedicated email servers with encryption and all, and dont have a VPN. Thanks.

    Read the article

  • Windows Server 2008 32 bit & windows 7 professional SP1

    - by Harry
    I'm testing my new Windows Server 2008 32 bit edition (2 servers) as a server and Windows 7 professional 32 bit as a client. Let say one is a primary domain controller (PDC) and the other is a backup domain controller (BDC) like the old time to ease. Every setup were done in the PDC and just replicate to BDC. Didn't setup anything, just install the server with AD, DNS, DHCP, that's all. Then I use my windows 7 pro 32 bit to join the domain. It worked. After that I tried to change the password of a the user (not administrator) but it always failed said it didn't meet the password complexity setup while in fact there's no setup at all either in account policy, default domain policy or even local policy. Tried to disable the password complexity in the default domain policy instead of didn't set all then test again but still failed. Browse and found suggestion to setup the minimum and maximum password age to 0 but it also failed. Tried to restart the server and the client then change password, still failed with the same error, didn't meet password complexity setup. Tried to see in the rsop.msc but didn't found anything. In fact, if I see the setup in another system with windows server 2003 and windows xp, using rsop.msc I can see there's setup for computer configuration windows settings security settings account policies password policy. I also have a windows 7 pro 32 bit in a windows server 2003 32 bit environment but unable to find the same setting using rsop but this windows 7 works fine. anyone can give suggestion what's the problem and what to do so I can change my windows 7 pro laptop password in a windows server 2008 environment? another thing, is it the right assumption that we can see all the policies setting in windows 7 whether it's in a windows server 2003 or 2008 environment? thanks.

    Read the article

  • LogMeIn Hamachi for Linux

    - by tlunter
    So far most of my work using LogMeIn Hamachi has been from either a Mac OS X or Windows system to Windows or a Linux Computer. Recently I purchased a mini computer and have been running Ubuntu Server on it, as my little server. I knew LogMeIn had a Linux client that is command line only, but I often do all my work via command line anyway, so that wasn't an issue. I added my user to the correct local file so that I could run the hamachi daemon without sudo, and was able to connect to LogMeIn's service. I decided to set up my Linux server as a git server as well, and set it up correctly. The thing is, the server is behind my schools firewall and I need to use hamachi to get around that. Since most of the time I was using either Mac or Windows, I never had an issue sshing onto any of my computers since LogMeIn is fully featured for these OSs. From Linux (Arch) though, it seems like the client cannot correctly route to the LogMeIn IPs. I know from Windows I can connect to the Linux computers, both of them. From Linux (Arch) though, I can't connect to my Mac, Windows, or Linux server. It keeps just dropping the connection. I was wondering if there was some configuration that I would need to make for this to work. I understand that it is most likely going to be a static configuration since I assume it has to do with the computer not understanding that 5.*.*.* actually refers to another IP:Port. Has anyone had any experience getting this to work?

    Read the article

  • Most secure way of connecting an intranet to an external server

    - by Eitan
    I have an internal server that hosts an asp.net intranet application. I want to keep it completely and utterly secure and private however we need to expose some information through a WCF service to another server which hosts our external websites which CAN be accessed by the public. What is the best way to pass information between the two servers with regards to an IT setup, while keeping the intranet in house server completely secure and inaccessible? I've heard VPN was the way to go but I wanted to be sure this was the safest way. Another question what would be the most secure way of passing data in the WCF service?

    Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >