Search Results

Search found 13347 results on 534 pages for 'embedded device'.

Page 431/534 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

• Does any one know of a packet generator?

  - by Benoit

  We have a networked device, and we would like to perform some tests on how it handles malformed packets. Is there a product out there that can generate arbitrary packets and packet sequences? I would like to be able to specify a set of TCP/IP payloads and it would open a connection and send the data. Obviouly, the TCP/IP checksum should be calculated correctly, etc... Kind of like a wireshark in reverse. Note that I am not interested in network loading and blasting millions of packet.

  Read the article

• What kind of icon should I deploy with my Android 1.x and 2.x application?

  - by licorna

  The thing is this, in Android 1.5 and 1.6 we had the Icon Design Guidelines. In this guide there are specifications for application icons. Every application should conform to this. However, in recent Android versions (2.0 and 2.1) icons have changed from the old to this new flat 2D style. Every icon in Nexus One has this style, so not even Google is conforming to the guideline. To see the differences between high and low density icons see this image and compare Evernote icon with the rest. I've been able to use different icons by using two directories with different icons: drawables-hdpi/icon.png and drawables/icon.png, BUT not every Android 2.x is going to be HDPI and not every 1.x Android device is going to be low pixel density. So the question is: Should I deploy different icons for different Android platform version within my apk file? and if I should, How do I do it?

  Read the article

• Why is my ipad's wireless so flakey?

  - by Mark

  I'm the proud owner of a new IPad here in the UK. All is good, except for the wifi, which is a bit flakey. It connects fine to my Draytek router which is set for WPA/WPA2 and 56g only, displaying full signal strength. Then, after a few minutes, it goes down to minimum strength... And sometimes it goes back up again. A few times, it seems to loose connection completely, and needs to be turned off and on again. I've looked at the Apple support site, and have tried their recommendations (which are not really very relevant), but still nothing. I've tried setting the router to wpa2 only, and setting long-preamble. Right now, I guess I want to know if it's a hardware problem with my device and should be returned, or if it's a problem with all ipads which will be resolved. Guess I could take it back to the Mac genius bar, but I find those guys so incredibly pretentious and, frankly, rather useless, that i'd rather wait until I've exercised other options!

  Read the article

• camera preview on androd - strange lines on 1.5 version of sdk

  - by Marko

  Hi all, I am developing the camera module for an android application. In main application when user clicks on 'take picture' button, new view with SurfaceView control is opened and camera preview is shown. When users click on dpad center, camera takes picture and save it to the disc. Pretty simple and straightforward. Everything works fine on my device - HTC Tattoo, minsdkversion 1.6 ...but when I tested application on HTC Hero minsdkversion 1.5, when camera preview is shown,some strange lines occur. Anyone has idea what is going on? p.s. altough preview is crashed, taking of pictures works fine here is the picture: Thanx Marko

  Read the article

• where do I submit the ipad apps?

  - by Mike

  I read Apple is allowing developers to submit iPad apps for the great opening of the ipad store, but I cannot find anything in my account that says that or allows sending the apps. Another thing is: in order for an app to be accepted you have to sign it with your own certificate but to do that you have to select the device on Xcode. As far as I know, Xcode do not signs with certificates applications that run on the simulator. Beyond that, any try to build a distribution package on Xcode shows messages like "you should disable armv6", and others. So, I ask. Is this news true? If yes, how to I manage to have the app ready for iPad and ready for submission? thanks.

  Read the article

• How can I get mounted name and (Drive letter too) on Windows using python

  - by aberry

  I am using Daemon tool to mount an ISO image on Windows XP machine.I do mount using Daemon command (daemon.exe -mount 0,). Above command will mount ISO image to device number. In my case I have 4 partition (C,D,E,F) and G for DVD/CD-RW. Now what happen, ISO gets mounted to drive letter 'H:' with name (as defined while creating ISO) say 'testmount' My queries:- 1) How can I get mount name of mounted ISO image (i.e. 'testmount'). Just another case; if there are already some mount points existing on machine and I created a new one using Daemon tool. Then If I can get latest one using script that will be great. 2) How to get drive letter where it did get mounted. If anyone know python script or command (or even Win command ) to get these info. do let me know. Thanks...

  Read the article

• What challenges are there in making an iPhone IDE for Windows/Linux?

  - by Moshe

  First of all, is this possible? If so: What challenges would I encounter in making an XCode imitation for iPhone/iPod development for Windows or Linux? I was thinking about using gcc as the actual compiler for the objecitve-c. Will that work? It doesn't need to compile to iPhone OS until it is to be tested on the device or submitted to the app store. Perhaps it will be easier to compile to the local OS format (Windows or Linux) until "prime-time".

  Read the article

• How do you control what your C compiler Optimizes?

  - by Jordan S

  I am writing the firmware for an embedded device in C using the Silicon Labs IDE and the SDCC compiler. The device architecture is based on the 8051 family. The function in question is shown below. The function is used to set the ports on my MCU to drive a stepper motor. It gets called in by an interrupt handler. The big switch statement just sets the ports to the proper value for the next motor step. The bottom part of the function looks at an input from a hall effect sensor and a number of steps moved in order to detect if the motor has stalled. The problem is, for some reason the second IF statement that looks like this if (StallDetector > (GapSize + 20)) { HandleStallEvent(); } always seems to get optimized out. If I try to put a breakpoint at the HandleStallEvent() call the IDE gives me a message saying "No Address Correlation to this line number". I am not really good enough at reading assembly to tell what it is doing but I have pasted a snippet from the asm output below. Any help would be much appreciated. void OperateStepper(void) { //static bit LastHomeMagState = HomeSensor; static bit LastPosMagState = PosSensor; if(PulseMotor) { if(MoveDirection == 1) // Go clockwise { switch(STEPPER_POSITION) { case 'A': STEPPER_POSITION = 'B'; P1 = 0xFD; break; case 'B': STEPPER_POSITION = 'C'; P1 = 0xFF; break; case 'C': STEPPER_POSITION = 'D'; P1 = 0xFE; break; case 'D': STEPPER_POSITION = 'A'; P1 = 0xFC; break; default: STEPPER_POSITION = 'A'; P1 = 0xFC; } //end switch } else // Go CounterClockwise { switch(STEPPER_POSITION) { case 'A': STEPPER_POSITION = 'D'; P1 = 0xFE; break; case 'B': STEPPER_POSITION = 'A'; P1 = 0xFC; break; case 'C': STEPPER_POSITION = 'B'; P1 = 0xFD; break; case 'D': STEPPER_POSITION = 'C'; P1 = 0xFF; break; default: STEPPER_POSITION = 'A'; P1 = 0xFE; } //end switch } //end else MotorSteps++; StallDetector++; if(PosSensor != LastPosMagState) { StallDetector = 0; LastPosMagState = PosSensor; } else { if (PosSensor == ON) { if (StallDetector > (MagnetSize + 20)) { HandleStallEvent(); } } else if (PosSensor == OFF) { if (StallDetector > (GapSize + 20)) { HandleStallEvent(); } } } } //end if PulseMotor } ... and the asm output for the the bottom part of this function... ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:653: if(PosSensor != LastPosMagState) mov c,_P1_4 jb _OperateStepper_LastPosMagState_1_1,00158$ cpl c 00158$: jc 00126$ C$MotionControl.c$655$3$7 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:655: StallDetector = 0; clr a mov _StallDetector,a mov (_StallDetector + 1),a C$MotionControl.c$657$3$7 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:657: LastPosMagState = PosSensor; mov c,_P1_4 mov _OperateStepper_LastPosMagState_1_1,c ret 00126$: C$MotionControl.c$661$2$8 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:661: if (PosSensor == ON) jb _P1_4,00123$ C$MotionControl.c$663$4$9 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:663: if (StallDetector > (MagnetSize + 20)) mov a,_MagnetSize mov r2,a rlc a subb a,acc mov r3,a mov a,#0x14 add a,r2 mov r2,a clr a addc a,r3 mov r3,a clr c mov a,r2 subb a,_StallDetector mov a,r3 subb a,(_StallDetector + 1) jnc 00130$ C$MotionControl.c$665$5$10 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:665: HandleStallEvent(); ljmp _HandleStallEvent 00123$: C$MotionControl.c$668$2$8 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:668: else if (PosSensor == OFF) jnb _P1_4,00130$ C$MotionControl.c$670$4$11 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:670: if (StallDetector > (GapSize + 20)) mov a,#0x14 add a,_GapSize mov r2,a clr a addc a,(_GapSize + 1) mov r3,a clr c mov a,r2 subb a,_StallDetector mov a,r3 subb a,(_StallDetector + 1) jnc 00130$ C$MotionControl.c$672$5$12 ==. ; C:\SiLabs\Optec Programs\HSFW_HID_SDCC_2\MotionControl.c:672: HandleStallEvent(); C$MotionControl.c$678$2$1 ==. XG$OperateStepper$0$0 ==. ljmp _HandleStallEvent 00130$: ret It looks to me like the compiler is NOT optimizing out this second if statement from the looks of the asm but if that is the case why does the IDE not allow me so set a breakpoint there? Maybe it's just a dumb IDE!

  Read the article

• All partitions missing when copying

  - by LiveEn

  I bought a new 320GB SATA hard drive few months ago no recently when i try to copy something to the drive after about 20 seconds the all the partitions in the hard drive suddenly disappears. The hard drive is not shown in either Disk manager or device manager. To get the HD work i have to restart the PC again.The same thing happens when i try to copy. Even when i play any audio or video after abt 5 minutes i get the same problem. The drives are NTFS and im running Windows XP.. Xan some one please help me solve the problem??

  Read the article

• Legality, terms of service for performing a web crawl

  - by Berlin Brown

  I was going to crawl a site for some research I was collecting. But, apparently the terms of service is quite clear on the topic. Is it illegal to now "follow" the terms of service. And what can the site normally do? Here is an example clause in the TOS. Also, what about sites that don't provide this particular clause. Restrictions: "use any robot, spider, site search application, or other automated device, process or means to access, retrieve, scrape, or index the site" It is just research? Edit: "OK, from the standpoint of designing an efficient crawler. Should I provide some form of natural language engine to read terms of service and then abide by them."

  Read the article

• entitlements are not valid

  - by Sathiya

  Recently, i have upgraded my iPhone SDK OS from version 2.2.1 to 3.0 version. After that while building my application i get an error the the provisioning profile has expired. So i created a new provisioning profile. Then i made the distribution of my application with the provisioning profile. But i get an error in iTunes while syncing my application into iPhone device. The error message is "The application"iGVA " was not installed on the iPhone because the entitlements are not valid." I checked the code signing Entitlements that contains the correct entitlement plist file. Please suggest me to solve it out. Any help would be appreciated ! Sathiya

  Read the article

• Alignment of Hebrew Vowel points in Android

  - by Aharon Manne

  I want to display Hebrew text with vowel points (nikkud) using the Canvas.drawText interface. The vowel points come out misaligned, as in the following image taken using a Motorola Defy+ device: The hiriq is between the resh and the yod, the holam between the vav and nun. I have added the rtl code (\u200F) to the string at both ends, no joy. I know that there are applications that have solved this problem, such as the Smart Siddur. Is there a difference between text-based applications and graphics based? I would think that the same engine renders the text in both cases. I suppose I could split up the string and place the vowels separately, but that seems pretty painful and not extensible. TIA for any clues.

  Read the article

• Specifying prerequisites for Puppet custom facts?

  - by larsks

  I have written a custom Puppet fact that requires the biosdevname tool to be installed. I'm not sure how to set things up correctly such that this tool will be installed before facter tries to instantiate the custom fact. Facts are loaded early on in the process, so I can't simply put a package { biosdevname: ensure => installed } in the manifest, since by the time Puppet gets this far the custom fact has already failed. I was curious if I could resolve this through Puppet's run stages. I tried: stage { pre: before => Stage[main] } class { biosdevname: stage => pre } And: class biosdevname { package { biosdevname: ensure => installed } } But this doesn't work...Puppet loads facts before entering the pre stage: info: Loading facts in physical_network_config ./physical_network_config.rb:33: command not found: biosdevname -i eth0 info: Applying configuration version '1320248045' notice: /Stage[pre]/Biosdevname/Package[biosdevname]/ensure: created Etc. Is there any way to make this work? EDIT: I should make it clear that I understand, given a suitable package declaration, that the fact will run correctly on subsequent runs. The difficulty here is that this is part of our initial configuration process. We're running Puppet out of kickstart and want the network configuration to be in place before the first reboot. It sounds like the only workable solution is to simply run Puppet twice during the initial system configuration, which will ensure that the necessary packages are in place. Also, for Zoredache: # This produces a fact called physical_network_config that describes # the number of NICs available on the motherboard, on PCI bus 1, and on # PCI bus 2. The fact value is of the form <x>-<y>-<z>, where <x> # is the number of embedded interfaces, <y> is the number of interfaces # on PCI bus 1, and <z> is the number of interfaces on PCI bus 2. em = 0 pci1 = 0 pci2 = 0 Dir['/sys/class/net/*'].each { |file| devname=File.basename(file) biosname=%x[biosdevname -i #{devname}] case when biosname.match('^pci1') pci1 += 1 when biosname.match('^pci2') pci2 += 1 when biosname.match('^em[0-9]') em += 1 end } Facter.add(:physical_network_config) do setcode do "#{em}-#{pci1}-#{pci2}" end end

  Read the article

• Programming Environment that runs directly on the iPhone or iPad?

  - by lexu

  Is there a development environment that runs directly on an the iPhone OS? I will be without access to a computer/internet for some time, but will have the use of an iPad (WiFi, jailbroken). Do you know of any way to dabble with programming directly on the device. Since apple is commit to not let it happen, I assume I will have to find such an environment on cydia (or a 'similar' site). I don't seem to be able to find the correct google incantations (search terms) to locate such a package.

  Read the article

• Chipmunk physics: Velocity question

  - by Johannes Jensen

  I'm making an iPhone game where the main actor is a ball that rolls depending on the device's accelerometer rotation. I haven't started on this part of the coding yet, but I was wondering if you guys had a nice way of solving this: I tried looking a little into chipmunk, and I noticed that bodies have the property v, which is a point containing x and y velocities. I was thinking it'd be a bad idea to just do like: playerBody->v = ccp(accelerometer.x * 5, playerBody->v.y); because it'd just roll up of walls and stuff, is there a better solution to do this?

  Read the article

• How could I get informations about the SIM card on Windows CE

  - by jeleb

  Hello, I am using a device running on WindowsCE 5.00. I cannot connect the GPRS, there is an error message telling that the port cannot be opened and may be in use by another application. I am not sure but I think the port it is talking about is a comp port to the SIM card that cannot be opened because the SIM doesn't work anymore. To tell the truth, it is likely that one of my coworker did lock the SIM and kept his mouth shut ... How could I get any information about the SIM on Windows CE ? I am new at this and Windows CE is not really user friendly ... I have been strongly searching this on internet but didn't find anything. Any kind of information will be welcomed. Thanks,

  Read the article

• Why dont Android applications provide an "Exit" option?

  - by Howiecamp

  Is there something in the Android developer guidelines that disuadea developers from providing the option to "exit" (stop running) an application from within the application itself? I love multitasking and all but it's not clear to me why: the vast majority of apps don't have their own Exit functions and hence just keep running forever don't give you a choice about running when you turn on the phone - they just do by default Both of these things lead to memory usage constantly increasing and your device running with this performance burden all of the time despite the fact that you may only want certain apps to run some of the time. Am I missing something?

  Read the article

• PCAP Web Service Usage Logging for Dummies

  - by nick

  I've been assigned the task (for work) of working with PCAP for the first time in my life. I've read through the tutorials and have hacked together a real simple capture program which, it turns out, isn't that hard. However, making use of the data is more difficult. My goal is to log incomming and outgoing web service requests. Are there libraries (C or C++) that stitch together the packets from PCAP that would make reporting on this simple? Baring that is there something short of reading all of the RFC's from soup to nuts that will allow me to have an "ah-ha!" moment (all of the tutorials seem to stop at the raw packet level which isn't useful for me)? It looks like PERL has a library that may do this and I may eventually attempt a reverse engineer from PERL. NOTE BENE: Web Server logs aren't acceptable here as I will be intercepting on a routing device. If I had access to those I'd be done and happy...I don't.

  Read the article

• Android forwards compatibility

  - by Brian515

  Hi all, I just published my first application to the market, but i just found out that android.telephony.gsm.smsmanager was depreciated as of Android 1.6. My application depends on sending SMS messages, so it cannot not work in 1.6 or newer. I built the project against 1.5, but I only have a device with 1.5 to test on. Since I built on 1.5, am I fine in terms of newer OSes, or will users get force closes? Thanks in advance! P.S. Is there a way to send/receive SMS messages in the emulator? That would be helpful.

  Read the article

• How to configure Transparent IP Address Sharing (TAS) on a Mediatrix 4102 with DGW 2.0 firmware?

  - by Pascal Bourque

  I am making the switch to VoIP. I chose voip.ms as my service provider and Mediatrix 4102 as my ATA. One reason why I chose the Mediatrix over other popular consumer ATAs is that it's supposed to be easy to place it in front of the router, so it can give priority to its own upstream traffic over the home network's upstream traffic. This is supposed to work transparently, with the ATA and router sharing the same public IP address (the one obtained from the modem). They call this feaure Transparent IP Address Sharing, or TAS. Their promotional brochure describes it like this: The Mediatrix 4102 also uses its innovative TAS (Transparent IP Address Sharing) technology and an embedded PPPoE client to allow the PC (or router) connected to the second Ethernet port to have the same public IP address, eliminating the need for private IP addresses or address translations. I am interested by this feature because my router, an Apple Time Capsule, doesn't support QoS and cannot give priority to the voice packets if the ATA is behind the router. However, after hours of searching the web, reading the documentation, and good ol' trial and error, I haven't been able to configure the Mediatrix to run in this mode. Then I found a version of the manual that looks like it was for a previous version of the firmware (SIP), where there is an entire section dedicated to configuring TAS (starting at page 209). But my Mediatrix comes with the DGW 2.0 firmware, whose documentation does not mention TAS at all. So I tried to follow the TAS setup instructions from the SIP documentation and apply them to my DGW firmware, using the Variable Mapping Between SIP v5.0 and DGW v2.0 document as a reference, but no success. Some required SIP variables don't have an equivalent in DGW. So it looks like the DGW firmware does not support TAS at all, or if it does they are not doing anything to help us set it up. So right now, the Mediatrix is behind the router and VoIP works perfectly except when my upstream bandwidth is saturated. My questions are: Is downgrading to SIP firmware the only way to have my Mediatrix 4102 run in TAS mode? If not, anybody knows how to setup TAS on the DGW firmware? Is TAS mode the only way to give priority to the voice packets if I want to keep my current router (Apple Time Capsule)? Thanks!

  Read the article

• Compact Framework : Read a SQL CE database on a PDA from a PC

  - by CF_Maintainer

  Hello, I have tasked with upgrading a CF Framework 1.1 suite of apps. Currently, the PC starts a server [after confirming via RAPI that the device exists and is connected] and spawns a app on the PDA as the client. The client process on the PDA talks with the db on the PDA and returns records to the PC app [using SQL CE 2.0. OpenNETCF 1.4 for communication/io]. I have a chance to upgrade the PC and PDA suite of apps to Framework 3.5 & CF 3.5 respectively. Due to a business requirement, I cannot get rid of workflow requiring the PC app to show a preview of the work done on the PDA. Question : Are there better ways to achieve the above in general with the constraints I have? I would really appreciate any Ideas/advice.

  Read the article

• Photo uploading via email

  - by Lee

  I'd like to be able to upload photos via email, which I've seen (and used) on eat.ly and meetups.jquery.com but I haven't been able to work out how to do this, does anyone have a solution? Essentially I believe the process should be something like this: 1) user adds picture to email on mobile device then send to a specific email address, say '[email protected]' 2) email server, cron job or something else looks at the senders address and tells it to add the attachement to that account 3) photo shows up on users profile page I run Apache servers, with MySQL, PHP, and a JQuery framework. I have email servers running Courier, and I missing anything?

  Read the article

• Android - Connectivity Questions

  - by Donal Rafferty

  I have a couple of questions about connectivity on Android, if anyone has any insight it would be great. What is the default when an application wants to wirelessly connect? Is it wlan? And if wlan is switched off or there is no access points around is it 3g or gprs? Is a device always ip connected? Or when its disabled from wlan or 3g does it lose its ip address? Is an application, for example the browser only ever connected to one ip address? Or can it be connected to multiple addresses for each radio such as gprs or wifi (wlan)? Can an application decide which connection to open a socket to? For example can I create an application and decide whether to connect the socket to the wlan or gprs? Or does the OS decide? Finally how do native applications handle connectivity? In the same manner?

  Read the article

• Getting x/y coordinate of a UITouch...

  - by Tarek

  HI, I have been trying to get the x/y coordinates from a touch on any iDevice. When getting the touch locations, everything looks ok if the touch is in the middle of the screen. But if I drag my finger to the bottom of the screen, I can only get a y coordinate of 1015. It should be getting to 1023. Same thing for dragging my finger to the top of the screen. I get -6. It should be 0. I have explicitly set the window and views to an origin of 0,0 and the width, height of the device's screen. Still nothing. I am really lost on what might be going on. Is something shifted? Am I not reading the x/y coordinates properly. Does something need to be transformed or converted? Any help would be much appreciated. T

  Read the article

• How to activate nVidia cards programmatically on new MacBookPros for CUDA programming?

  - by Carsten Kuckuk

  The new MacBookPros come with two graphic adapters, the Intel HD Graphics, and the NVIDIA GeForce GT 330M. OS X switches back and forth between them, depending on the workload, detection of an external monitor, or activation of Rosetta. I want to get my feet wet with CUDA programming, and unfortunately the CUDA SDK doesn't seem to take care of this back-and-forth switching. When Intel is active, no CUDA device gets detected, and when the NVidia card is active, it gets detected. So my current work-around is to use the little tool gfxCardStatus (http://codykrieger.com/gfxCardStatus/) to force the card on or off, just as I need it, but that's not satisfactory. Does anybody here know what the Apple-blessed, Apple-recommended way is to (1) detect the presence of a CUDA card, (2) to activate this card when present?

  Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >