Search Results

Search found 11906 results on 477 pages for 'ip restrictions'.

Page 431/477 | < Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >

  • Diagnosing Random Network Lag

    - by uesp
    I'm having trouble diagnosing some random lag on a 6 server LAMP cluster serving a MediaWiki site. While we're serving some 100 pages/sec the servers themselves are running fine with less than 0.5 load, no locked processes, no paging, no errors being logged, etc.... Lag is present on all servers and is random: one minute its fine the next it's there. DNS lookups on the servers are randomly slow. For example time nslookup google.com varies randomly from a few milliseconds to several seconds and sometimes times out entirely. While we use IP addresses internally on the cluster this may be a symptom of the root issue. We are not running our own DNS server. The Apache server-status pages randomly lag or time out. Benchmarking using ab between servers shows a few loads sometimes take 3000 ms (almost exactly). Benchmarking server-status on the local server itself usually shows no issue (it showed a lag only once among a few hundred tests). The servers are sitting behind a switch and a firewall which I don't have any access to so I don't know their setup or status. While we are under heavier than normal load a 2 Mbps incoming and 20 Mbps outgoing traffic shouldn't be stressing the switch or firewall should it? My feeling is that it is the switch/firewall or something above them in the ISP like their DNS but can't confirm it. I need some other tests or methods of diagnosing this lag to try and narrow down the ultimate cause.

    Read the article

  • Mounted NFS directory not writable by Apache / PHP

    - by phpfour
    Need some help here with NFS. Here's what I have (all servers running CentOS 5.6 with SELinux): 172.17.20.1 - Primary server with static IP. Varnish redirects requests to the web servers. 172.17.20.2 - Web server 1 172.17.20.3 - Web server 2 The application residing on the web servers is running Drupal and I need both of them to share the same files directory. I have created a folder in 172.17.20.1 called /var/nfs with root user. Here is my /etc/exports content: /var/nfs 172.17.20.2(rw,sync,no_root_squash) 172.17.20.3(rw,sync,no_root_squash) On both the web servers (172.17.20.2/3), I have it mounted like below: [root@web2 ~]# mount ... 172.17.20.1:/var/nfs on /mnt/nfs/var/nfs type nfs (rw,sync,hard,intr,addr=172.17.20.1) On all the servers, I've added the user apache to the root group to get the desired write access: [root@main ~]# cat /etc/group root:x:0:root,apache .... .... apache:x:48: [root@web1 ~]# cat /etc/group root:x:0:root,apache .... .... apache:x:48: Despite all this, when I try to write files into the /mnt/nfs/var/nfs folder from Drupal/PHP, it cannot write to it. I even tried with a simple PHP upload script but it doesn't work, so the problem is not with Drupal. Any help you guys can do is much appreciated. I've spent hours and hours with it, without any success :( Thanks in advance.

    Read the article

  • Troubles with apache and virtual hosts

    - by xZero
    I have a BIG problem. I have VPS with Debian OS, and LAMP installed. Fresh install. For control panel i using Webmin. Now i trying to setup multiple sub-domains on my server using webmin for example: downloads.my-domain.com cpanel.my-domains.com forum.my-domains.com But problem what is happening is next, while i using no virtual hosts, everything works perfectly when i accessing it using my-domain.com, but when i add Virtual host, i cann access it but my-domain.com becomes unavilable because it redirects to virtual hosts i added. When i add more than 2 virtual hosts, problem is still here. Also, when i try to access to virtual server for example downloads.my-domain.com, it redirects again to cpanel.my-domains.com When i delete virtual hosts, access to my-domain.com is succesfull... What i known: - That is not problem with my domain provider. I correctly added subdomains and added host record to my VPS IP. - I added unique name to every single virtual host. - There are no two same virtual hosts - Every virtaul hosts have own directory: for example: downloads.my-domain.com have own WWW dir: /var/downloads Can somebody help me? Thanks.

    Read the article

  • Running router as virtual machine, can it be realible ?

    - by Kr1stian
    Hi all Does anyone here run their routing through virtual machine, have virtual machine setup as main router/getaway etc ? If yes, how many clients are using this kind of setup ? For those who are wondering why I'm asking this. I got assignment for my internship to create all in one "box" which would do routing and be IP PBX in one time ( only open source solutions can be used, expect RouterOS). The routing part is currently done through RouterOS and for VoIP they want to use sipXecs. RouterOS supports virtualization through KVM, but RouterOS itself only supports 2GB of memory ( and wont support more in near future). sipXecs needs allot more than 2GB. I told them that we could solve this problem by putting RouterOS as virtual machine to 64bit hostOS ( e.g. CentOS), and other virtual machine would run sipXecs. By that we would be able to use whole memory. But they told me that it's to risky to do something like that and that they need something with "enterprise stability/reliability". I told them that we could make redundant image of each VM which would automatically start if one VM stop's working, but I was told the same thing. So this is why I asked those question above, to see if I really suggested something that's not good to do, or maybe this is something completely normal and it can be done with "enterprise stability/reliability" :) Thank you for answers, Kristian

    Read the article

  • Correct use of SMTP "Sender" header?

    - by Eric Rath
    Our web application sends email messages to people when someone posts new content. Both sender and recipient have opted into receiving email messages from our application. When preparing such a message, we set the following SMTP headers: FROM: [email protected] TO: [email protected] SENDER: [email protected] We chose to use the author's email address in the FROM header in an attempt to provide the best experience for the recipient; when they see the message in their mail client, the author is clear. To avoid the appearance of spoofing, we added the SENDER header (with our own company email address) to make it clear that we sent the message on the author's behalf. After reading RFCs 822 and 2822, this seems to be an intended use of the sender header. Most receiving mail servers seem to handle this well; the email message is delivered normally (assuming the recipient mailbox exists, is not over quota, etc). However, when sending a message FROM an address in a domain TO an address in the same domain, some receiving domains reject the messages with a response like: 571 incorrect IP - psmtp (in reply to RCPT TO command) I think this means the receiving server only saw that the FROM header address was in its own domain, and that the message originated from a server it didn't consider authorized to send messages for that domain. In other words, the receiving server ignored the SENDER header. We have a workaround in place: the webapp keeps a list of such domains that seem to ignore the SENDER header, and when the FROM and TO headers are both in such a domain, it sets the FROM header to our own email address instead. But this list requires maintenance. Is there a better way to achieve the desired experience? We'd like to be a "good citizen" of the net, and all parties involved -- senders and recipients -- want to participate and receive these messages. One alternative is to always use our company email address in the FROM header, and prepend the author's name/address to the subject, but this seems a little clumsy.

    Read the article

  • Troubleshooting my internet connection

    - by Simon Verbeke
    While I was out of the house, my father rearranged the network cables a bit. I don't know what he has done exactly - He says nothing more then pulling and untangling. When I came back home, my internet connection changed its IP from 192.168.0.205 to 169.254.197.233. The speed changed from 1Gbps to 10Mbps. It has also been at 100Mbps for a while. My subnetmask changed from 255.255.255.0 to 255.255.0.0. The standard gateway changed from 192.168.0.1 to no standard gateway. My DNS servers remain the same. I have checked the lights of the UTP ports, and it looks like it's only sending a heartbeat every few seconds. A sketch of the (relevant part of) the network: My PC ----- extender ----- modem ^ ^ ^ Wired | Wired | This thing connects two cables to each other All the cabling is gigabit, my network card is a Realtek RTL8168C(P)/8111(P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.20). THe modem is a CBN SVG6540E I have no idea what is going on here and I don't know how to find out either. Any help is welcome! If you need any more info, please ask.

    Read the article

  • How do i install apache on my ubuntu 12.04 where it has virtualhost

    - by YumYumYum
    According to the docs https://help.ubuntu.com/10.04/serverguide/httpd.html i have done following, and that is almost how i do always in my Fedora, but Ubuntu looks like its not working. a) DNS to IP $ echo "127.0.0.1 a" > /etc/hosts $ echo "127.0.0.1 b" > /etc/hosts b) Apache virtualhost $ ls 1 2 default default.backup default-ssl $ cat 1 <VirtualHost *:80> ServerName a ServerAlias a DocumentRoot /var/www/html/a/public <Directory /var/www/html/a/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> $ cat 2 <VirtualHost *:80> ServerName b ServerAlias b DocumentRoot /var/www/html/b/public <Directory /var/www/html/b/public> #AddDefaultCharset utf-8 DirectoryIndex index.php AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> c) load into Apache and restart the service $ a2ensite 1 $ a2ensite 2 $ a2dissite default $ /etc/init.d/apache2 restart d) Browse the new 2 hosts $ firefox http://a Does not work it goes always with http://a or http://b to /var/www/html How do i fix it so that it goes to its own directory e.g: http://a goes to /var/www/html/a/public not /var/www/html?

    Read the article

  • Why am I experiencing random connection timeouts? (CentOS)

    - by Ryan
    I have a CentOS server setup that currently hosts several websites (all relative of each other in some form or another). As of recently throughout the day at the most random times the website speed will lag to a crawl and eventually hit a connection timeout. When I say random times this typically happens anywhere between 10am and 1pm usually, however, this morning this happened to me at 8am. I do not have a lot of familiarity with server knowledge as far as what I am looking for in this situation. What are some possible causes of why my server is slowing the websites down to a complete crawl or timing out? Are there specific things I should be checking for when this happens? I have noticed using: tail /var/log/httpd/access_log That usually when this down time occurs there are lot of IP addresses related to BingBot, Googlebot, and sometimes various bots or spiders that I am unfamiliar with. Could this be related and if so how can I avoid this from causing my websites to lag out? Thanks in advance for any help or advice. The websites that are timing out are built with PHP and use a MySQL database to display information.

    Read the article

  • can't register a soft phone to asterisk11

    - by Tom
    I have a VM (on oracle vbox) running Fedora17. I've installed asterisk 11 on it from sources. I've followed the wiki for installation (https://wiki.asterisk.org/wiki/display/AST/Creating+SIP+Accounts) to the letter. The ip on the VM machine running fedora is 192.168.1.7 and I can ping it from the host machine (Ubuntu 12.04), which is at 192.168.1.2 I've tried registering with ekiga with the following settings: user: [email protected]. Password: verysecretpassword registar: 192.168.1.7 but I'm getting an error "transport fail". Also, while trying to register I'm logged in to the asterisk CLI with verbose level 3 and debug level 4 and nothing appears. some more relevant data: I've added the following code to the end of my sip.conf.sample file: [demo-alice] type=friend host=dynamic secret=verysecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 [demo-bob] type=friend host=dynamic secret=othersecretpassword context=users deny=0.0.0.0/0 permit=192.168.1.0/255.255.255.0 After I changed the sip.conf.sample file, I've created a copy of it and named it sip.conf. then I logged in to the asterisk CLI and typed sip reload. Then I'm trying to register and ekiga client from my host machine at 192.168.1.2 but it doesn't work and nothing appears on the asterisk CLI while in verbose mode level 3. BTW, If there is missing information about my question, please don't close it. comment about what you need to know and I'll edit it in to the question. tnx.

    Read the article

  • Apache mod_proxy

    - by mhouston100
    Uggh, I'm spewing that I can't figure this out, I'm so frustrated: <VirtualHost *:80> servername domain1.com.au ServerAdmin webmaster@localhost DocumentRoot /var/www/html ErrorLog ${APACHE_LOG_DIR}/error.log CustomLog ${APACHE_LOG_DIR}/access.log combined <Proxy *> Order Allow,Deny Allow from all </Proxy> RewriteEngine on ReWriteCond %{SERVER_PORT} !^443$ RewriteRule ^/(.*) https://%{HTTP_HOST}/$1 [NC,R,L] </VirtualHost> <VirtualHost *:443> servername domain1.com.au SSLEngine on SSLCertificateFile /etc/apache2/ssl/owncloud.pem SSLCertificateKeyFile /etc/apache2/ssl/owncloud.key DocumentRoot /var/www/html </VirtualHost> <VirtualHost *:*> Servername domain2.com.au ProxyRequests Off <Proxy *> Order deny,allow Allow from all </Proxy> ProxyPass / https://192.168.1.12/ ProxyPassReverse / https://192.168.1.12/ </VirtualHost> Not sure if it's clear what I'm trying to do, but I've read and read and READ, I still can't figure it out. Basically I have a working Apache server with a rewrite to force HTTPS, as seen in the first two VirtualHost entries. I now have a webmail service I set up on another server, under another domain name, however I only have one incoming public IP address. So I'm trying to have any incoming requests for the second domain to be proxied to the other server to access the webmail, whether its port 80 or 443. IMAP and POP3 are no problems, I can just forward the ports directly to the correct server. The results of the above configuration is that requests to domain2.com.au (port 80 or 443) are forwarded to https://domain1.com.au. Am I headed in the right direction?

    Read the article

  • SSH attcack CentOS Amazon EC2

    - by user37143
    Hi, I run a few Rightscale CentOS AMI based instances on Amazon EC2. Two months back I found that our SSHD security is compromised( I had added host.allow and host.deny for ssh). So I created new instances and done an IP based ssh that allows only our IPs through AWS Firewall(ec2-authorize) and chnaged the ssh 22 default port to some other port but two days back I found I was not able to login to the server and when I tried on 22 port the ssh got connected and I found that sshd_conf was changed and when I tried to edit sshd_config I found root had no write permission on the file. So I tried a chmod and it said access denied for 'root' user. This is very strange. I checked secure log and history and found nothing informative. I have PHP, Ruby On Rails, Java, Wordpress apps running on these server. This time I did a chkrootkit scan and found nothing. I renamed the /etc/ssh folder and reinstalled openssh through yum. I had faced this on 3 instances on CentOS(5.2, 5.4) I have instances on Debian as well those working fine. Is this a CentOS/Rightscale issue. Guys, what security measures I should take to prevent this. Please support me this is very critical. Thanks

    Read the article

  • Window 7 image in vmware will allow network connection out but not http

    - by Ormis
    I am currently trying to create a set of images to deploy on my network, but I've run in to a snag. When I create my own Windows 7 image I can successfully use NAT for connecting to the network but whenever I try to access a webpage I get nothing. To be more specific, All firewalls/iptables are disabled on my host machine, my virtual machine, and my network. I can do lookups and all addresses respond correctly (i'm even using Google's DNS). On the host OS i have full connectivity. On the virtual machine I can ping any device I want and all addresses resolve correctly. Within a browser I cannot reach any page via hostname or IP. I feel almost like port 80 is being blocked but i can't find any reason this would be the case. If anyone has had this occur before, I would love some insight to the problem. I initially asked this on stackoverflow and now my eyes are now opened up to superuser. Thank you for any help you can provide.

    Read the article

  • Vmware player change dhcp server settings

    - by Tathagata
    I have a Windows Server 2003 running from a Vmware player on Win 7 box. The idea is to test Windows Deployment service in the virtual network. Is it possible to configure the vmware dhcp server with WDS related stuff(option 66, 67)? I found a few references where people were using the vnetlib.exe to start, stop the dhcp serverchange the subnet mask etc - but there's no info on how to get set the dhcp server options. DHCP config from the virtual network editor I do have the Workstation, without the license for it. In the Virtual network Editor, the DHCP settings for the network I'm using, only allows me to set the subnetmask, IP ranges and stuff like that. But not the dhcp options. DHCP server on the WDS server Authorizing the DHCP server in the guest WDS server fails. The VMware player can run its own dhcp server fro the virtual network with out any authorization from the Active directory - can I do the same, with Win dhcp server in the guest Win Server? ~~~~~ Can I authorize W2K8 DHCP server for private network, even when prohibited in enterprise network? says we have to run a third party dhcp server... :/.

    Read the article

  • What is wrong with my DNS entries?

    - by matheus
    I have some problems with a domain not working as expected. My registrar's controlpanel shows these records for mydomain.eu: www A 111.222.333.444 * A 111.222.333.444 I use the nameservers of my registrar. I get a correct answer if i do dig www.mydomain.eu dig whatever.mydomain.eu I can also ping/visit website etc with those adresses. But, dig mydomain.eu wont resolve to anything. I just get this: ; <<>> DiG 9.6-ESV-R1 <<>> mydomain.eu ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 46837 ;; flags: qr rd ra; QUERY: 1, ANSWER: 0, AUTHORITY: 1, ADDITIONAL: 0 ;; QUESTION SECTION: ;mydomain.eu. IN A ;; AUTHORITY SECTION: mydomain.eu. 1799 IN SOA ns1.binero.se. registry.binero.se. 1281647822 3600 240 1209600 3600 ;; Query time: 77 msec ;; SERVER: 8.8.8.8#53(8.8.8.8) ;; WHEN: Thu Jan 6 01:36:31 2011 ;; MSG SIZE rcvd: 83 The same A-record setup work for another domain/server ip, but that domain has other nameservers. What am I missing here?

    Read the article

  • Cannot configure hostname keeps on changing after reboot CentOS 6 + nginx [on hold]

    - by The Wolf
    I just finished this tutorial I found online: http://www.unixmen.com/install-lemp-nginx-with-mariadb-and-php-on-centos-6/ Now, I am having trouble making a hostname, you can see the result at: http://www.intodns.com/busilak.com here are my confs /etc/hosts 127.0.0.1 localhost.localdomain localhost localhost4.localdomain4 localhost4 # Auto-generated hostname. Please do not remove this comment. 198.49.66.204 host.busilak.com busilak.com host ::1 localhost localhost.localdomain localhost6 localhost6.localdomain6 /etc/sysconfig/network NETWORKING="yes" GATEWAYDEV="venet0" NETWORKING_IPV6="yes" IPV6_DEFAULTDEV="venet0" HOSTNAME="host.busilak.com" /etc/nginx/conf.d/default.conf server { #listen 80; #server_name host.busilak.com; #charset koi8-r; #access_log logs/host.access.log main; location / { root /usr/share/nginx/html; index index.html index.htm; } error_page 404 /404.html; location = /404.html { root /usr/share/nginx/html; } Question: Is there anything I should have done? I just want to use my domain: busilak.com as default domain for my server, such that when I open busilak.com it would point readily to my VPS ip address.

    Read the article

  • Any ideas why Ettercap filters aren't seeing packet data?

    - by Bryan
    I'm using an Ettercap filter to detect a query response coming back from a particular service on a remote machine. When I see a response from the service, I'm searching through the data in the packet to see if an offset is a specific value, and if so I'm changing the value at another offset. Trouble is, when I try this on a new virtual machine I built my Ettercap filter's no longer getting any data in the DATA.data variable available to it. if(ip.proto == TCP && tcp.src == 17867) { msg("Response seen!\n"); if(DATA.data + 2 == "\0x01") { msg("Flag detected!\n"); DATA.data + 5 = 0x09; } } The filter's getting applied to the traffic because "Response seen!" messages get printed out by Ettercap. However, "Flag detected!" messages do not. I think DATA.data is indeed empty because if I change my second "if" statement to check for DATA.data == "" then the "Flag detected!" message gets printed. Any ideas why this may be happening?! Also, if this is the wrong site to be asking questions like this, please let me know. I wasn't sure if it fit better here or somewhere like superuser or serverfault. By the way, this is a cross-post from StackOverflow... I should have posted on this forum instead I think. :)

    Read the article

  • Single Sign On 802.1x Wireless - saying “Connecting to <SSID>”, hangs for 10 seconds, fails with “Unable to connect to <SSID>, Logging on…”.

    - by Phaedrus
    We are implementing WiFi on Windows 7 machines in our corporate environment. Machines should be able to log into the domain by WiFi as the Machine (Pre-Logon), and as the User (Post-Logon). We have everything working correctly except for 2 things: 1) Sometimes the login scripts don't run 2) The user VLAN is sometimes different than the machine vlan, and no DHCP renew occurs after user logon. I am clear that both these problems should be fixable by using the "Single Sign On" Option under the 802.1x Wireless Vista GPO, and setting the wireless to connect immediately before user logon and also by enabling "This network uses different VLAN for authentication with machine and user credentials" If I enable these GPO settings in a lab, the computer does authenticate & gets WIFI before the user logs on, so when the login box is displayed, it says “Windows will try to connect to ”, even though it is already connected (which should be ok?). Enter the user credentials and it goes to a screen saying “Connecting to ”, hangs for 10 seconds, fails with “Unable to connect to , Logging on…”. Desktop fires up and then the user re-authenticates with no problem as himself instead of the machine, but by that point, we defeat the point of the WiFi SSO “before user logon”. Also by that point, no DHCP renew seems to occur, and the user is still stuck with the wrong IP address for the new VLAN. When the “Connecting to ” screen comes up, there’s no indication on the AP or the Radius server that anything whatsoever is happening after credentials are entered until after the domain logon. Also with this policy enabled, sometimes windows hangs on a black screen indefinitely until I disable the Wireless NIC, so something is knackered for sure. What have I missed? Suggestions are much appreciated... /P

    Read the article

  • Per-mailbox IMAP settings in Exchange 2003 apply successfully but revert to server default

    - by erictheavg
    The title says most of it. I have a Spiceworks mailbox that connects to our Exchange Server 2003 box via IMAP for receiving help desk issues. But for complicated reasons, I want it to receive those emails in text-only format. So, I discovered that you can just go to: Exchange System Manager Administrative Groups First Administrative Group First Storage Group Mailbox Store Mailboxes Right-click the mailbox, Configure Exchange Features Edit the properties for IMAP Set that mailbox to only receive message bodies as plain text. I click OK, then Next, it reports success, and I assume I'm done. But then when I go right back to where I was, I see that "Use protocol defaults" is still checked. Anyone have a clue why this would be? Some other details: I'm logged in as Administrator when I do this. I can't change this setting for the entire IMAP virtual server because some regular users use it. I only have one IP address to play with, which means I can't create another IMAP virtual server. Any suggestions or ideas are greatly appreciated!

    Read the article

  • ADSL2+ - High sync-rate, good line attenuation, but low noise margin and slow speeds

    - by Mark Pim
    I've been with my ISP (IdNet) for a few months and have been getting some good speeds, but in the last week the speed has dramatically decreased (from 15 Mbps+ to around 0.2 Mbps). This happens at all times of day, not just peak periods. Obviously I've done all I can to isolate problems my end - only one PC is connected to the router (via ethernet cable) and no other background programs are using the network etc. I've raised the issue with the ISP and they've suggested trying a new ADSL filter to see if that is casuing the problem, but I thought it would also be good to get the opinion of superuser on possible causes or other troubleshooting I can do. Here are the juicy stats :) My router (Netgear DGN1000) reports: Downstream Upstream Connection Speed 17602 kbps 1062 kbps Line Attenuation 17.9 db 8.6 db Noise Margin 6.0 db 6.1 db I used RouterStats and it seems to show those figures stay fairly consistent all the time I ran the BT speedtest and it reported: download speed of 164 kbps, out of a max achievable of 21000 kbps upload speed of 859 kbps, out of 1048 kbps DSL connection rate 17719 kbps down and 1048 kbps up IP Profile of 15000 kbps Is there any more troubleshooting I can do? Does this look like a problem with my equipment / wiring or with BT's line? Any advice would be great :)

    Read the article

  • Why are SIP calls via my server silent?

    - by Archcode
    I have FreeSWITCH SIP server up and running. It has public IP and sits behind 1-to-1 NAT (it's Amazon EC2 instance actually). I can connect to it, make a call to other endpoint (namely, my android device to my pc and vice versa) and signals are send with no problems (call, answer, hangup, etc). Unfortunately, and what drives me crazy, that's all: no audio gets through, no video either. Server does not throw errors, it reports many retransmission though, looks like this: switch_rtp.c:915 [ zrtp engine]: WARNING! HELLO Max retransmissions count reached (20 retries). ID=15 Codecs are set up correctly (same config worked locally on my LAN). NAT/firewall on client side may be a problem, signals do get through (perhaps due to fixed port, data streaming runs on random one, that is currently my best bet). STUN/TURN/ICE setting on client seem to have no effect. Endpoints sit behind symmetric NAT. On server there are no iptables rules, security group is set as suggested there: http://wiki.freeswitch.org/wiki/Firewall Help, please. How to make it work or at least diagnose what's wrong?

    Read the article

  • Doesn't work Nginx + SSI

    - by boopidoopi
    I have some problems. Nginx doesn't work with SSI. Nginx listens 80 port (frontend), apache2 listens 81 port (backend). That is my nginx configurations: server { listen 80; server_name test.dev www.test.dev; error_log /var/log/nginx/error.log debug; log_subrequest on; location / { ssi on; proxy_pass http://localhost:81; proxy_redirect off; proxy_set_header Host $host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; client_max_body_size 15m; client_body_buffer_size 128k; } } SSI include in test.dev index.php: <!--# include virtual="http:test.dev/test.html" -- When I open test.dev/index.php I see clean page. In page source: <!--# include virtual="http:test.dev/test.html" -- So how to enable SSI in nginx? Can you help me?

    Read the article

  • Configuring nginx to check for hard files in only a few directories,

    - by Evan Carroll
    For a node.js project I'm doing, I have a tree like this. +-- public ¦   +-- components ¦   +-- css ¦   +-- img +-- routes +-- views Essentially, I have the root to be set to public. I want all requests destined to /components/ /css/ /img/ To check to see if their appropriate destinations exist on disk. However, I don't want requests to other directories to even run an IO operation, /foo/asdf /bar /baz/index.html None of those should result in the disk being touched. I have a stansa that does the proxy to node.js, location @proxy { internal; proxy_set_header Host $http_host; proxy_set_header X-Real-IP $remote_addr; proxy_set_header X-Forwarded-For $proxy_add_x_forwarded_for; proxy_set_header X-NginX-Proxy true; proxy_pass http://localhost:3030; proxy_redirect off; } I just would like to know how to arrange this. My problem would be easily solved if try_files took a single argument, but it always wants a file first. location /components/ { try_files $uri, @proxy } location /css/ { try_files $uri, @proxy } location /img/ { try_files $uri, @proxy } However, there is nothing that I can find that will give me, location / { try_files @proxy } How do I get the effect I want?

    Read the article

  • Apache and Virtual Hosts Problem on OS X

    - by Charles Chadwick
    I recently formatted and installed my iMac. I am running 10.6.5. Prior to this format, I had the default Apache web server up and running with several virtual hosts, and everything ran beautifully. After formatting, I set everything back up again, and now Apache is acting funny. Here is a description of what I have going on. My default root directory for the Apache Web server is pointed to an external hard drive. In my httpd.conf, here is what I have: DocumentRoot "/Storage/Sites" Then a few lines beneath that: <Directory /> Options FollowSymLinks AllowOverride All Order deny,allow Allow from all </Directory> And then beneath that: <Directory "/Storage/Sites"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from All </Directory> At the end of this file, I have commented out the user dir include conf file: Include /private/etc/apache2/extra/httpd-userdir.conf And uncommented the virtual hosts conf file: Include /private/etc/apache2/extra/httpd-vhosts.conf Moving on, I have the following entry in my vhosts file: <VirtualHost *:80> DocumentRoot "/Storage/Sites/mysite" ServerName mysite.dev </VirtualHost> I also have a host record in my /etc/hosts file that points mysite.dev to 127.0.0.1 (I also tried using my router IP, 192.168.1.2). The problem I am coming across is, despite having PHP files in /Storage/Sites/mysite, the server is still looking at /Storage/Sites. I know this because in the DocumentRoot contains a php file with phpinfo() (whereas the index.php file in mysite has different code). I have tried setting up other virtual hosts, but they are still doing the same thing. Also, "NameVirtualHost *:80" is in my vhosts file. I saw as a solution on another thread here. Doesn't seem to make a difference. Any ideas on this? Let me know if this is not enough information.

    Read the article

  • Looking for easiest, most simple solution to run a customised DNS Server for my local network on Windows 7.

    - by Jamie G
    I need to forward some websites, such as http://testing.server/ to an fixed IP address on my local network. I can do this easily on one computer using the hosts file. However, I need this to work for all machines on my network. I think the best way to do this will be to setup my own DNS Servers and add the custom DNS settings there. However, I'm looking for the simplest way possible to do this - I really don't want to spend hours setting up Unix Servers and running tricky terminal based scripts just to do this! My server is a standard Windows 7 machine. My dream would be a nice simple windows program with a GUI where I could input my ISP's DNS server and it would use those records, unless I had specifically set up my own DNS for a domain to use instead. If it had a web based admin system that was accessible from another computer on the network that would be even better. Does anyone know of anything that can do this? Many thanks indeed.

    Read the article

  • Remote reboot of windows to knoppix

    - by user64452
    I am attempting to develop an Auditing application. This audit application will be employed on windows networks. The Audit will need to discover Hardware and software details of all machines attached to the network (including Printers) I do not want to have to install this application on each workstation. The audit app. needs to discover all the ip addresses of all the networked workstations. I have been prototyping this app for the last couple of months and have decided to try a new tack Is this possible? a). You have a windows network, min Windows XP sp3 and upwards b). Maximum of 100 Networked machines (if that matters) c). I need to remotely reboot each WINDOWS machine in turn on the entire network and get it to startup using UNIX, say knoppix for example! d). however the knoppix live cd is only available from one of the networked machines Questions... Morphology? Longevity? Incept dates? Cheers DD

    Read the article

< Previous Page | 427 428 429 430 431 432 433 434 435 436 437 438  | Next Page >