Search Results

Search found 15896 results on 636 pages for 'gnome settings daemon'.

Page 432/636 | < Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >

• Windows Home Server restore causes computer to be removed from the domain?

  - by unknown (google)

  I restored my Dell M4400 that is a company laptop, and now I get an error when I try to log on and am connected to our corporate network, which says that the domain controller could not be found or that the computer is not part of the domain. Everyone else can log on, so it seems my computer is no longer part of the domain, even though it thinks it is per the settings. One thing of note: my computer crashed on 1/14/10, but I restored from a backup that was made on 12/20/09. So I am not sure if that made a difference? Also, I tried running "gpupdate" to update my group policy, but that did not seem to help. Any ideas? Seems like a bit of a flaw in the backup system for computers that are part of a domain. I guess I wanted to hear from someone with more knowledge about how a computer is recognized as part of a domain to know if this should be expected when doing a restore or if I should file a trouble ticket.

  Read the article

• Why are Rules not applied to additional mailboxes when using Outlook 2007 and Exchange?

  - by Clean

  Hi, I've set up a few rules in Microsoft Outlook 2007. Outlook 2007 is configured to use my Microsoft Exchange account. In the Microsoft Exchange settings, I've set up two additional mailboxes, Inbox1 and Inbox2. Thus, using Microsoft Exchange I now have three mailboxes: Inbox, Inbox1 and Inbox2. The rules I've set up all work fine for mails arriving in the Inbox. However, they do not work at all for mails arriving in either Inbox1 or Inbox2. Do anyone perhaps know why this is, and perhaps what I could to to solve this? Thanx in advance!

  Read the article

• Outlook 2010 stopped marking messages as read after reading them

  - by dunxd

  Yesterday I noticed that Outlook 2010 had stopped marking messages as read unless I right click and select Mark as Read. I have checked the Reading Panel settings (it's set to 0 seconds), but I don't use the reading panel to read my mail. When I open a message by doubleclicking it, then close it again, the message is still marked as Read. Outlook 2010 is connecting to Exchange Server 2003. This was working fine until yesterday. As far as I know there have been no config changes at either the client or server end.

  Read the article

• Something is spamming from my hMail server - how can I deal with this?

  - by joshcomley

  My Windows 2008 server is attempting to send out a lot of spam, I've just discovered, and I'm not sure how to see where the compromise is. For example: has someone hacked an account? Has someone hacked the server? Is there a virus on the server? What can I do to investigate this? Edit Thanks for the replies so far. I am running hMail server, and have spent so long investigating the correct configuration but still I end up with these emails being sent. Here is a screenshot of my Internet IP range settings on the server: (let me know what else I can provide to help)

  Read the article

• Is 50% download speed on a wireless G network normal?

  - by Bartlomiej Skwira

  I have a wired connection of about 36Mb/s, but my wireless speed is max at about 18-19Mb/s. I have a WRT54G-TM (T-Mobile, 802.11G) router with DD-WRT firmware - I've upgraded it to latest build. Done some settings changes: changed channel - 13 wireless network mode - G-only ACK Timing - 0 Fragmentation Threshold and RTS Threshold - 2304 Basic Rate - All Signal/Noise ratio: -46/-94, signal quality ~50-60%. Is this normal with G networks? Edit: The AP is located about 2 meters from laptop, no walls or metal objects, but its next to a TV. I've done a channel scan (had problems locating it, go to "Status - Wireless - Site survey" - lame naming) and everybody else is on channels 1 and 6. Switched to channel 11 but it didn't help. As for trasmit power I got best results with default 71mw. The antenna might be a factor, I'm using the default 2 antennas.

  Read the article

• Outlook '10 hangs often, IMAP sync

  - by user23150

  We have 3 employees using IMAP to sync with their Desktop and Android Phones. Two are using 70% of their accounts storage, another is using 80%. They all have similar counts on folder structure, etc. The employee with the 80% storage is constantly having Outlook freeze on them for up to 5 minutes at a time. I realize this is Outlook connecting and doing activity on the server, but no one else has this problem. In fact, one user with the 70% storage used uses a very slow laptop, and doesn't have freezing issues. The network is the same, the settings are the same - at a loss how to proceed? Obviously "Outlook is a crummy IMAP client" doesn't help management...

  Read the article

• PDF files are opening in Firefox, undesiredly

  - by root

  PDF files have suddenly started to open within the browser windows of Firefox 17. The PDF files are being displayed with the Adobe Acrobat plugin, which is odd, since I have explicitly disabled the Adobe Acrobat plugin in Firefox. I would like for Firefox to show the download prompt when opening a PDF file, instead. I have disabled the Adobe Acrobat plugin and I have made sure that PDF files are set to "Always Ask" in the Options dialog. For good measure, I've also tried disabling all plugins and extensions, and associating all file types to "Always Ask", but to no avail. So why is Firefox 17 suddenly ignoring these settings?

  Read the article

• IPv6 feature in Network Adaptor is Slowing Internet

  - by Teknophilia

  The past few days, my internet browsing has become very poor. It's not a matter of speed, as a speed test will give at least 15Mbps. It seems as if my laptop has a hard time actually connecting to the sites. I've found a possible culprit, but don't know why it would affect anything: Going to adapter settings and disabling ipv6, but leaving ipv4, my browsing is back to normal. Re-enabling ipv6 brings back the issue. This is strange though, because I have always had ipv6 enabled. Moreover, using sites to test ipv6 compatibility, I fail with ipv6 enabled on my adapter, and pass when it's disabled. Ideas about why this is happening, and how to fix it?

  Read the article

• wireless printer - entering WPA - is there a quicker way?

  - by camcam

  I have a wireless printer (Brother DCP-585CW). The wireless setup instruction says I should enter the WPA key to the printer. The key is entered using up and down buttons on the printer. So, I am supposed to enter 64 characters using up and down buttons. To enter 1 character, it takes on average (24+10)/2 = 17 times pressing the button (digits start after 24 letters). So 17*64 = 1088 times. Is there a quicker way to setup a wireless printer? Maybe there is a Windows program that discovers printers connected to computer through USB or Ethernet (my printer has both sockets) and allows to pre-configure it for wireless usage (enter the long WPA key)? Update There is BRAdmin program and it allows to set up almost all wireless settings... almost - all except WPA :(

  Read the article

• Yum through http proxy

  - by eodchop

  I have several Fedora 13 servers that have to connect through an http proxy for yum updates. All port 80 traffic has to be routed through this proxy. I have setup the proxy server in the network settings GUI. I can browse the internet just fine. I have also setup my proxy information in /etc/yum.conf as follows: proxy=http:proxy.largecorp.corp/accelerated_pac_base.pac proxy_user=user proxy_password=password I then added the export HTTP_PROXY="http:proxy.largecorp.corp/accelerated_pac_base.pac" to /etc/bashrc and sourced the file. When i run yum update: Loaded plugins:presto, refresh-packagekit Error: Cannot retrieve repository metadata (repomd.xml) fro repository: fedora. Please verify its path and try again. All of the repo urls are the defaults, as this is a fresh install.

  Read the article

• Memory works fine separately, but not together

  - by patersonjs

  I've been given four 1GB Corsair DDR2 memory modules, and am trying to fit them into my computer but am getting BSOD on Windows XP and errors in Memtest86+. I've tried to identify if one particular module is faulty by trying them in pairs. They work fine in pairs, but when all four are inserted, Memtest86+ reports errors. The motherboard is an Asus P5N-E with dual channel support and the modules are all the same model (same speed, capacity and timings) but one pair is a different hardware revision. One is v2.1 and the other is v2.2... the voltages are the same too. Would this minor difference be a possible cause of the problem? I've got the BIOS memory timing settings all at AUTO - should I manually set the timings?

  Read the article

• Optimize Windows file access over network

  - by Djizeus

  At my company I frequently need to access shared files over a Windows network. These files are located on the other side of the planet, so I guess the file share goes through some kind of VPN over Internet, but I don't control this and it is supposed to be "transparent" for me. However it is extremely slow. Displaying the content of a directory in the file explorer takes about 10s. Even if over the Internet, I did not expect that retrieving a list of file names would be that long. Are there any settings to optimize this from my Windows XP workstation, or is it mostly related to the way the network is configured? The only thing I have found so far is to cache all file names, while by default only short file names are cached (http://support.microsoft.com/kb/843418).

  Read the article

• Sync content from my iPad to iTunes? i.e. "reverse" syncing

  - by Jim

  I recently had to reset my PC back to factory settings which lost my entire iTunes library. I still have my music and other files on my iPad and want to sync it back to the PC. Upon syncing it only gives me two options. "Erase and Sync" which replaces the contents of my iPad with the blank iTunes library, or, "Transfer Purchases" which reads like it will only transfer the purchases from iPad to iTunes. I would like to avoid re-burning my entire CD library to iTunes all over again. Is there a way for me to sync the iPad to the iTunes library (aka the computer)?

  Read the article

• Is there any way to automatically prevent running out of memory?

  - by NoahY

  I am often running out of memory on my VPS ubuntu server. I wish there was a way to simply restart apache2 when it starts running out of memory, as that seems to solve the problem. Or am I just too lazy to fix the problem? I do have limited memory on the server... Okay, more information: I'm running apache2 prefork, here are my memory settings (i've been tweaking them...): StartServers 3 MinSpareServers 1 MaxSpareServers 5 MaxClients 150 MaxRequestsPerChild 1000 The VPS has 1 GB of ram, running ubuntu 11.04 32-bit. As for scripts, I have a wordpress network with 5 blogs, an install of AskBot (a python/django stackexchange clone), and an install of MediaWiki that isn't really used. There is also a homebrewed mp3 script that accesses the getid3 library to display information on lists of podcasts, and it seems to be throwing some php errors, not sure if that's the culprit...

  Read the article

• Operating system not found after downloading skin pack

  - by 8BitSensei

  My brother has downloaded a executable file from Skin Pack — I believe it was the Mountain Lion IO6 skin pack. He's using an Acer Aspire 553G. And now his operating system won't start (Windows 7). It gets to the BIOS and then goes to load up the OS but the screen goes blank and it just goes back to the BIOS over and over again. He decided to play with the bootup settings and tried different options and got the error message "Operating System not found." Does anyone have any idea how to solve this?

  Read the article

• Netbook screen too small, Software fix?

  - by LantisGaius

  I have a netbook with a maximum screen resolution of 1024x600. I'm running a dualboot Ubuntu10.10 & Backtrack4r2, and I'm having some trouble with windows whose "height" was larger than 600px. Buttons end up below the screen, and I can't click 'Ok' or 'Cancel' or 'Apply'. When my OS was still Windows7, I didn't have any problems because I can resize all of the windows that I use. Most of windows in linux (esp. in KDE settings), the windows has a fixed height. Is there any workarounds to my problem?

  Read the article

• Iptables port mapping from two PCs to one

  - by Anton

  We have 3 PCs, two of it are connected to internet (both of it have 2 NIC) PC1: eth0 - 1.0.0.1 (external IP) eth1 - 172.16.0.1 (internal IP) PC2: eth0 - 1.0.0.2 (external IP) eth1 - 172.16.0.2 (internal IP) PC3: eth0 - 172.16.0.3 (internal IP) Now we want to map port 80 from PC1 and PC2 to PC3. But there is the problem: iptables port forwarding works well from PC1 or PC2, but only in case if PC3 have PC1 or PC2 as gateway. So, question is: can we have port mapping from both PC1 and PC2 regardless of gateway settings on PC3? Thank you in advance.

  Read the article

• Keeping the wireless connected.

  - by casr

  I’m running OpenBSD on a computer which is connected via wireless to the network. It is a well supported NIC and I’ve had no problems with it from a hardware perspective. Unfortunately my wireless access point occasionally loves to forget it’s settings. I then have to help it remember. However, in this intervening time my OpenBSD box drops the connection and then does not automatically reconnect. I have alleviated my problems by running this simple script in the background: #!/bin/sh while [ 1 ] do ping -c1 192.168.1.254 > /dev/null if [ $? = 1 ] then sh /etc/netstart ral0 > /dev/null fi sleep 30 done [Ping the access point. If there is no response attempt to reconnect.] It seems to me to be a very suboptimal solution. Has anyone else come across a better way?

  Read the article

• mysql is not using multiple cpus

  - by mhost

  Our MySQL server has been using a lot of CPU lately (it's reached 100% several times and stays there for a while) and I noticed that it the CPU load is all on one core of one cpu. I was hoping to spread that out to all 4 on my server. I have been tweaking the MySQL settings to use more ram and less cpu, but it still occasionally reaches very high CPU usage. It seems like everything about the topic refers to thread_concurrency (which I've read is a solaris only setting). What can I do in Linux? Thanks.

  Read the article

• Audio Line-In on Ubuntu/Linux Mint

  - by hahuang65

  I'm currently on Windows, and want to switch to Linux, but some hardware issues are preventing me. Mainly, I have a sound card that supports Line-In. On Windows, anything I plug into the line-in gets outputted to the speakers. However, when I installed Linux, because there is not a control application that comes with the driver, I have no idea how to set this up. I tried going to the sound settings and it doesn't seem to be there. I also want to configure it for 2.1 sound, and do not know how to do that... Anyone here done it before? Thanks in advance for the help!

  Read the article

• Black screen with cursor after BIOS screen

  - by Radio

  Here is a weird one, Got computer with Windows XP. It's getting stuck on a black screen with cursor blinking. What did I do: - Boot from installation CD (recovery option - command line): chkdsk C: /R copy D:\i386\ntdetect.com c:\ copy D:\i386\ntldr c:\ fixmbr fixboot Chkdsk showed 0 bad sectors and no problems during scan. dir on C:\ shows all directories and files in place (Windows, Program Files, Documents and Settings). BIOS shows correct boot drive. Still does not boot. Not sure what to think of. Please help. UPDATE: Just performed these steps: Backed up current disk C: (without MBR) using True Image to external hard drive Ran Windows XP clean installation with deleting all partitions and creating new one. Hard drive booted fine into Windows GUI installation!!! Then: I interrupted installation. Booted from True Image recovery CD and restored archive of disk C to an new partition. Same issue with black screen.

  Read the article

• Is there a way to adjust colors of a specific window?

  - by Synetech

  Is there a (Windows) program or something that will allow the user to adjust the brightness/contrast/gamma of a specific window rather than the whole screen? As a use-case scenario, imagine having a web-page showing on one half of the screen, and another program taking up the rest of the screen. This other program uses the default Windows colors (e.g., white background), so it may be glaringly bright. Alternately, the web-page may be too dark to see. Adjusting the monitor or video-card settings would affect everything which will be no good. Adjusting the default Windows colors is, at best, inconvenient. Instead, there needs to be a way to set the colors of one of the windows to equalize the whole screen.

  Read the article

• how do I install an add on from zip in xbmc 12?

  - by jcollum

  http://wiki.xbmc.org/index.php?title=Add-ons#How_to_install_from_zip The wiki is pretty straighforward but those options are not present when I follow the steps in the wiki. I select this: System -- Settings -- AddOns All I see is a list of add ons like Youtube and Railscasts. There's no option for installing from a zip file like the wiki says. Pressing ".." just takes me to the list of AddOn types like "Album Information" and "Artist Information" etc. The wiki looks to be out of date.

  Read the article

• How do I force Windows to play sound through the speakers only when a USB headset isn't connected?

  - by Phoexo

  I'm using a speaker set connected through the green audio jack and a headset which I connect through USB. My problem is that every time I connect/disconnect my headset, I have to go through a lot of settings/restart some programs to make the sound go through the speakers again. What I want is to have audio play through the headset when it's connected, but if I disconnect the headset, I want the audio to automatically play through the speakers. For example, if I connect/disconnect the headset while listening to music, I have to restart the application to make the music play through the correct speaker/headset, and it shouldn't be that inconvenient. (I found this somewhat relevant topic, but the problem is that it doesn't really give an answer. (Also, it is 2 years old.))

  Read the article

• Setting up Django application on lighttpd behind apache reverse proxy

  - by ml256

  I have a Django app at http://some_other_example.com (it will be behind firewall) running on lighttpd server with fastcgi. I need make it available under http://example.com/myapp. It works fine except for redirects - when I login from http://example.com/myapp/login it redirects me to http://example.com instead of http://example.com/myapp. When logging-in from http://some_other_example.com/login it is ok. My configuration: apache2.conf at example.com: ProxyPass /myapp http://some_other_example.com ProxyPassReverse /myapp http://some_other_example.com ProxyHTMLURLMap http://some_other_example.com /myapp <Location /myapp> SetOutputFilter proxy-html ProxyHTMLExtended On ProxyHTMLURLMap / /myapp/ </Location> in settings.py I added USE_X_FORWARDED_HOST = True but it didn't help

  Read the article

< Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >