Search Results

Search found 15896 results on 636 pages for 'gnome settings daemon'.

Page 434/636 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

• BSOD / Reboot Cycling (possibly after windows update?)

  - by Mikey.B

  Windows XP SP3 Hi Guys, My desktop PC rebooted during the night (presumably due to an automated Windows update) and was stuck on a file system check. I forced a reboot as it had been stuck for hours and now the system won't finish booting. It shows the Windows XP splash screen, briefly flickers what looks to be a BSOD, and then reboots. So far, I've tried: Booting into all variations of safe mode (just hangs) Setting BIOS settings to fail-safe defaults (still reboots) Choosing the start-up option to load last known good configuration (still reboots) Any suggestions on how to proceed here? I haven't installed any recent software or hardware so I don't think this is a result of any explicit change I've made. -M

  Read the article

• Allow Internet Access with Default Gateway on Windows 7 VPN Server

  - by Hakoda

  I have a Windows 7 box at home (which I'll refer to as Home-VPN) that runs a simple PPTP VPN server. I have a range of 2 IP address (192.168.1.10-192.168.1.11) to give out, although the server is only able to give out one concurrent connection. Ports 1723 & 47 are correctly forwarded to the server. IPv6 is disabled on both Home-VPN and the client. I setup Home-VPN just like this Youtube video: http://www.youtube.com/watch?v=1s5JxMG06L4 I can connect to it just fine but I can't access the Internet when connected to Home-VPN, all outside web servers (eg. google.com, mozilla.org, apple.com) are unreachable. I know I can uncheck "Use Default Gateway on Remote Servers" on the client side under IPv4 settings but that will route all my traffic through my current connection, rather than through the VPN, defeating the purpose of said VPN. Any ideas on how I can fix this?

  Read the article

• Netgear routers don't allow you to disable wireless admin??

  - by MousePad

  I just bought a new router, the NetGear WGR614. Nowhere in the settings can you disable the ability to administrate the router from a wireless connection, which opens it up to brute force attacks from outside the building. Furthermore, it doesn't require a direct connection to the router to admin either, you can admin it while you're connected to the Internet. This means it opens itself to the possibility of an attack from within the network. This is unbelievable to me. What am I missing? Can this be possible?

  Read the article

• Exclude localhost from htt_proxy

  - by Chilloutman

  I'm trying to access a server that is running locally on my machine (localhost). I'm using the "wget"-command to download the servers http-response. I've also tried using the "curl"-command to do this, but both (wget and curl) are trying to get through my proxy-server and failing at it: --2010-05-04 09:05:34-- http://localhost:8080/api/getplist ... Proxy request sent, awaiting response... 503 Service Unavailable 2010-05-04 09:05:35 ERROR 503: Service Unavailable. Obviously they shouldn't need to go through the proxy, right? So I disabled the http_proxy: export http_proxy="" And then it worked fine. Disabling the the http_proxy every time or permanently are no options. How can I set it to ignore the proxy settings when accessing "localhost"?

  Read the article

• Inbox should not contain any calendar appointment

  - by cotablise

  Imagine two users A and B.User B has editor rights on mailbox A via delegation. Delegation settings: User A should not receive any invitation (calendar appointments). All should be routed to user B. It works fine when you are connected to mailbox via Outlook. Problem is that sometimes it does not work when user is connected via his iPhone (he receives calendar appointments in inbox). I know that this feature for MS products and therefore it works on MS Outlook. But user A told me that it worked in the past also on iPhone with user C. Problem is that nowadays it does not work perfectly for user B. Do you have any suggestion please? Thank you in advance.

  Read the article

• How to restrict all services to single domain in Ubuntu?

  - by harold

  Someone has pointed an unknown domain to my server's IP address likely via A records. I would like to reject access to ALL services (httpd, ssh, mail, etc.) from this domain and only allow requests from my domain. I want to make it so when I connect to that domain it's completely rejected from my server. I can disallow access from HTTP by changing my web server settings, but I want to do this for every single type of connection. How can I do this?

  Read the article

• Help: My SSL Certificate expired but I can't renew this weekend, is there a way I can disable SSL through IIS?

  - by shogun

  Or perhaps force redirect to HTTP when they request HTTPS? I tried removing the SSL port settings under 'Advanced' but it broke the login page. I don't want to do a deploy/recompile right now but I am able to edit the VIEWS. However I am thinking there may be a way for IIS to do this, but then again I think the .NET code tries to force SSL. Crap. This is bull crap because I was bugging people about getting the new certificate since December and they were like oh we will take care of it... I think it may have even gotten to the point where they were getting annoyed with me hassling them about it! (rant over.) And yes, the key is that more support tickets will be caused by the browser giving a security error than if SSL was removed entirely for one day. Becaues they wouldn't very very likely not notice it being gone.

  Read the article

• Cisco WLAN Controller not pushing out DHCP addresses, what else could it be?

  - by Name

  On our Cisco WLAN Controller web interfaces, in Controller Interfaces, I have made a new interface with these settings: VLAN Identifier 202 IP Address 172.16.202.1 Netmask 255.255.255.0 Gateway 172.16.202.254 Primary DHCP Server 172.16.100.3 Secondary DHCP Server 172.16.100.2 Port: LAG I've also made a new WLAN and assigned it to the above interface. I have saved changes. But our wireless devices, although they seem to authenticate with the WLAN fine, they always get stuck on "obtaining DHCP address", so it seems the WLAN Controller isn't pushing out DHCP addresses to our devices. We do have a DHCP scope for the above in Windows Server 2008 R2 and everything there seems fine. If I connect a device with a static address (e.g. 172.16.202.10), it will connect. Stuck on what to do :(

  Read the article

• Mysql process goes over 100% of CPU usage

  - by Temnovit

  Hello! I'm experiencing some problems with my LAMP server. Recently, everything became very slow, even though visitor count on my websites didn't change to much. When I run top command, it sais that mysql process has taken over 150-200% of CPU. How's that possible, I always thought that 100% is a maximum? I'm running Ubuntu 9.04 server edition with 1,5 GB RAM my.cnf settings: key_buffer = 64M max_allowed_packet = 16M thread_stack = 192K thread_cache_size = 8 myisam-recover = BACKUP max_connections = 200 table_cache = 512 table_definition_cache = 512 thread_concurrency = 2 read_buffer_size = 1M sort_buffer_size = 4M join_buffer_size = 1M query_cache_limit = 1M # the maximum size of individual query results query_cache_size = 128M Here is the output of MySQLTuner: The top command: What could be the cause of this problem? Can I make changes to my my.cnf to prevent server from hanging?

  Read the article

• Running a service as root

  - by kovica

  I have a java program that I use to automate the process of creating VPN settings for clients. The program calls couple of bash scripts, create and copies files around. I have to run it under root user because the whole VPN config is under /etc/openvpn. For this directory I need root privileges. On the same machine I have Glassfish application server and it will call the mentioned Java program. Glassfish is run under non-root user. What is the best, most secure way of running a program as a root user of course without entering a password if I run it via sudo?

  Read the article

• Windows Firewall 2008 Server - Allow only given IP in, block all others

  - by chumad

  I've got a Windows 2008 Server. It has the built-in windows firewall on it. I've played around with the Advanced settings where I can setup inbound/outbound rules, but it doesn't appear that I can create a rule that would say "Block All incoming traffic except traffic coming from this IP address" I created a rule that Blocks All, but there's no way that I've found to create a rule that will "override" the block rule and allow 1 or more IP's to get in. I accomplished this on a Win2k box using IPSEC, but it seems that IPSEC is now built-in to windows firewall. Any tips?

  Read the article

• How can I continue audio playback even after switching user?

  - by klyonrad

  I just tested it with iTunes; after switching the user account (only after logging into another account, to be precise) the audio playback from the account "A" stops. However iTunes continues playing in the background; which I realized after switching back to account "A". Very frustrating because it kind-of is a deal-breaker for me; the other person should be able to have some personalized settings; while it is still my computer, and the main account has all the music obviously. The ideal solution would be audio output continuing running while user still has the ability to manually pause it... EDIT: I tested a bit more: "Desktop" apps like VLC don't output sound but continue running; the stock Music.app in Metro pauses the music and continues playing when switching back.

  Read the article

• 8GB, but have to run Windows Xp (32 Bit). Anything I can do with the additional memory?

  - by user12889

  I ordered a new computer with 8GB RAM with the plan to run Windows 7, 64Bit. Turns out now, that I need to run a 32Bit OS (XP or 7) due to some software which does not run on 64Bit yet (not even with any of the available compatibility settings / modes). Is there anything I can do with the memory above 4GB in this scenario? I'm willing to consider creative solutions like running a hypervisor under XP that offers the memory as a RAM-Disk for swapping etc. ? The software that does not run on 64Bit is CISCO VPN (there seems to be a half-working solution for that) and CISCO IP phone / webcam integration "CISCO Unified Video Advantage" (there is apparently no solution for that).

  Read the article

• Forcing Windows to be 'awake' during certain hours?

  - by Mun

  I'm running Windows 7 and have the power options currently set up to put the machine to sleep after 2 hours of inactivity. Is there any way to force the machine not to sleep between certain hours, or to automatically wake up? I'm assuming this can't be done directly from within the Windows power settings, but is there a third party utility (preferably free) that could take care of this? I've got backups scheduled every morning at 3-4am, and these don't run if the machine is suspended, so I just need to make sure that the everything is powered up during this time.

  Read the article

• Boot.ini on Windows Server 2003 R2

  - by Jason H.

  I have a Windows Server 2003 R2 with 48 GB of RAM; server has been running strong for quite some time. Recently our boot.ini was modified causing issues, most likely by our remote administrators. Now the server is only showing 14 GB of RAM. This has caused major performance issues for our end users. Our remote administrators have stated "we don't change the boot.ini settings(switches)". However, I know for a fact that all of the local administrators have not modified the switches (due to lack of permissions). The real question.. Is it possible to "audit" who has modified the boot.ini? If thats not possible, can the boot.ini be set via startup? Any help would be greatly appreciated. This is an ongoing issue that I would love to resolve.

  Read the article

• How to set up an extended desktop on dual monitors in Kubuntu 9.04?

  - by Dennis

  I'm using my laptop (Lenovo Thinkpad T60) and I have a secondary monitor (which has a different resolution than my laptop screen) connected by VGA. Kubuntu recognizes the monitor and it functions but my desktop is mirrored (i.e. an identical copy) across the dual monitors (which is useless to me). How can I extend my desktop across both monitors? P.S. I googled it but the solutions I found weren't standard, they were hardware specific and you had to manually change system files, etc.. There must be an easier way. edit: Here is a snapshot of the settings.

  Read the article

• Windows xp keeps rebooting itself every morning at 8am?

  - by mark

  Hi, I've got windows xp sp3. It seems to restart itself every morning at 8am (judging by the windows logs, I can see all apps log a startup at 8am every day). Whenever I get to the machine in the morning (around 9 am) I see it's rebooted. I've checked that automatic updates are off, and that the power management settings are set to "always on". I'm not sure what else could be causing the machine to reboot, not sure where to start looking. Any ideas? Thanks ---------- update ---------------- Just looking at the Event Viewer, I see a log message at 8:00:47am every day, which looks like a reboot log statement: Microsoft (R) Windows (R) 5.01.2600 Service Pack 3 Multiprocessor Free. For more information, see Help and Support Center at ...

  Read the article

• How to use cursor keys to switch buffers in GNU screen

  - by suvayu

  I want to use cursor keys or cursor keys with a modifier like Ctrl to switch between screen buffers (e.g. C-a [arrow] or C-a C-[arrow]). So far I have tried settings like the ones below with no success. bind \224\115 prev bind \224\116 next bindkey -d ^[[1;5D prev bindkey -d ^[[1;5C next They are either ignored or behave unexpectedly (the second one). I am also not sure how to specify the keys. To get the characters, I either used C-v to quote them in bash, or tried to look-up on the Internet (e.g. http://ascii-table.com/ansi-escape-sequences.php). Any idea how I can achieve this key binding?

  Read the article

• Call connects through Emapthy, but no voice

  - by Arthur

  I am trying to make calls using Empathy on Debian.The call rings and connects, but I can't hear voice, or answering machines. I had a similar problem a while back that was caused by my PBX not being compatible with a protocol. The protocol issue is fixed now and Linphone works fine on a different pc. I tried using Ekiga, on the problem computer, and it works fine.The problem seems to be with the settings on Empathy. I need to get this going. Any help would be greatly appreciated.

  Read the article

• PC reboots instead of shutting down, no software problem. What could be the cause?

  - by DaVinci

  Hi, first of all: I'm not sure if superuser is the right site for my question and google didn't help. I have a pc here that prefers rebooting to shuting down. Everytime I try to shut the pc down it reboots, however it is possible to turn the pc off by pressing the power button. The problem is not windows-specific, the Ubuntu LiveCD does exactly the same that's why I said that it is no software problem. I checked wake on LAN, it is disabled and I also resetted the BIOS settings to factory default. That might not mean that it can't be a BIOS problem but I don't know what else to try here. I did not check any hardware yet but nothing exploded so far. I don't know what could have caused this behaviour as it is not my PC. The Mainboard is a ASUS P5Q-E P45.

  Read the article

• FFMPEG Splitting MP4 with Same Quality

  - by Pragmatic

  I have one large MP4 file. I am attempting to split it into smaller files. ffmpeg -i largefile.mp4 -sameq -ss 00:00:00 -t 00:50:00 smallfile.mp4 I thought using -sameq would keep the same quality settings. However, I must not understand what that does. I'm looking to keep the same quality (audio/video) and compression with the split files. However, this setting makes the split files much larger. What flag(s) do I need to set to keep the same quality and attributes in the split files while maintaining the same quality to size ratio? For instance if my original file is about 12 GB and is 1920x1080 with a bitrate of 10617kbps and a framerate of 23 frames/sec and 6 channel audio with 317kbps, I would like the split files to be the same only a third of this size (if i split it into three pieces).

  Read the article

• Why don't they clean up the Windows folder? [on hold]

  - by NeoLegends

  To me, that thing seems like an utter mess, at least most parts. Some are pretty organized (.NET and GAC-Folders), but most of the others (System32) are not. Wouldn't it improve the general developer productivity if they cleaned it all up? In general - I don't know why they didn't stop that folder becoming a huge mess, and why they don't take any efforts to reduce it. (Win 8 Settings App sits in System32 while Store sits in Root directory, iirc) FHS isn't perfect, but it's far better than that...

  Read the article

• Automatic repair software

  - by ADOConnection

  Do anyone knows any kind of apps or services for "taking care of servers"? (besides managed servers) There are hundreds of ways your server or application can stop working properly. Small things are easy to miss but usually easy to fix. Log overgrouth, configuration issues, etc. Of course there are best practice checklists, but its not a human task to check configuration best practices. Im sure it can be automated: some kind of agent can monitor all system settings, say what is right and wrong and give suggestions on how to make it right. I have to admin several servers and I need some kind of overview of overall situation. As well as a tool, that will fix problems automatically. Can you people suggest something? (I know its a little bit out of rules of SF, but I think this particular question is quite specific) It would be great to have something like http://stackoverflow.com/questions/1451319/asp-net-mvc-view-engine-comparison but for automation software.

  Read the article

• Why do I see different TCP behaviour between IIS and FTP server applications on Windows 2003?

  - by rupello

  I am comparing Wireshark traces of a 10MB file download file from: the FileZilla FTP server and IIS (using HTTP) on the same Windows 2003 server. The FTP download performs faster and the trace shows the server behaving as expected, sending more data to the client with every ACK received: Link to full-size image The HTTP server trace shows a more bursty pattern. The timing of the send bursts are sometimes unrelated to any ACKs received from the client (circled in red): Link to full-size image Anyone have a suggestion as to why IIS traffic is having like this? Update: We have tried modifying the http.sys registry settings (setting MaxBytesPerSend to 256k and MaxBufferedSendBytes to 64k as recommended). Changing MaxBytesPerSend does seem to improve performance by increasing the amount of in-flight data , but we still see the same bursty pattern.

  Read the article

• PHP CPU utilization limit

  - by knightrider

  I have done some research on the net regarding the problem. My questions is NOT how to reduce cpu utilization by improving algorithm or improving the performance by using multitasking or limiting CPU per system user. I have a website where user logs in does some processing and logout. The site uses linux server, php and apache. The problem is that I cant control the amount of CPU allocated to each user. ie I want give a guarantee that a user will get say atleast 5% of CPU (assume total number of users is less than 20). How can I do this? Any solution (A php code, apache server settings, or any out of box soln) is welcomed. Thankyou very much for reading this :)

  Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >