Search Results

Search found 65244 results on 2610 pages for 'jim work'.

Page 432/2610 | < Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >

  • psybnc on nas: ncurses problem

    - by holms
    Trying to get compile psybnc on NAS. ipkg is default package manager in here. I've installed ncurses already, it's in /opt/lib (libncurses.so) [\w] # ls /opt/lib | grep ncurses libncurses.so libncurses.so.5 libncurses.so.5.7 libncursesw.so libncursesw.so.5 libncursesw.so.5.7 [\w] # file libncurses.so.5.7 libncurses.so.5.7: ELF 32-bit LSB shared object, ARM, version 1 (SYSV), dynamically linked, stripped I added this path to /etc/profile [\w] # echo $PATH /bin:/sbin:/usr/bin:/usr/sbin:/opt/bin:/opt/sbin:/opt/lib So trying to make menuconfig gives me this error [\w] # make menuconfig Initializing Menu-Configuration [*] Running Conversion Tool for older psyBNC Data. Using existent configuration File. [*] Running Autoconfig. System: Linux Socket Libs: Internal. Environment: Internal. Time-Headers: in time.h and sys/time.h Byte order: Big Endian. IPv6-Support: Yes, general support. But no interface configured. async-DNS-Support: Yes. SSL-Support: No openssl found. Get openssl at www.openssl.org Creating Makefile [*] Creating Menu, please wait. This needs the ncurses library. If it is not available, menuconf wont work. If you are using curses, use make menuconfig-curses instead. make: *** [menuconfig] Error 1 Same goes for make menuconfig-curses [\w] # make menuconfig-curses Initializing Menu-Configuration using Curses [*] Running Conversion Tool for older psyBNC Data. Using existent configuration File. [*] Running Autoconfig. System: Linux Socket Libs: Internal. Environment: Internal. Time-Headers: in time.h and sys/time.h Byte order: Big Endian. IPv6-Support: Yes, general support. But no interface configured. async-DNS-Support: Yes. SSL-Support: No openssl found. Get openssl at www.openssl.org Creating Makefile [*] Creating Menu, please wait. This needs the curses library. If it is not available, menuconf wont work. make: *** [menuconfig-curses] Error 1 Psybnc compiled ok, just wanna work with menuconfig instead of configuration file.

    Read the article

  • Alternative to Daemontools (djbtools) to supervise unix processes?

    - by Stefan Lasiewski
    I've used Daemontools to provide a simple and reliable way to supervise Unix services on my servers. It works well, but it requires a different way of thinking (The DJB Way) and some common complaints are: TAI64N based timestamps Doesn't store scripts under /etc/init.d (or (/usr/local)/etc/rc.d) Doesn't always work with scripts like apachectl. Some scripts need to be rewritten. I remember that some similar "supervisor/watchdog" daemons were in the works about two years ago, but some were still a little rough around the edges. If you have switched from Daemontools to something else, what did you choose and did it work well for you? Does RedHat or Ubuntu come with any process supervisor utilities by default?

    Read the article

  • Laptop HDMI out to monitor DVI in

    - by Roy Rico
    I have a laptop that i'm trying to fix, and it has HDMI out. I have a cable i bought for my HTPC which does DVI out to HDMI in, which worked fine. Was hoping to be able to use this same cable for HDMI out to DVI in, is it possible? UPDATE: Point of clarification, The laptop's display doesn't work (it was dropped) and I'm trying to figure out what's working and what isn't. in addition to HDMI out, it has VGA out, but that seems to have a short in it, and doesn't display properly (sometimes it works, sometimes, it shows stuff in 256 colors in 800x640). I can tell the LCD screen works (comes on) so i think it's whatever is carrying the data to it that doesn't work. I know more often than know, the display is what breaks... The cable i'm using is a standard HDMI to DVI cable, there are no audio connections or anything. Thanks!

    Read the article

  • How to get osx terminal.app and screen/vim scrolling to play nice?

    - by rustychains
    OSX 10.6.3 terminal.app Am a pretty dedicated screen user. Terminal.app line buffer and/or scroll does not seem to work for me. That is while in screen anything that goes past the top of the frame is gone, can't scroll back to. This seems to work ok in other terminal apps gnome, cygwin. Perhaps this is a shell env, config, or command? .screenrc: startup_message off autodetach on shell -$SHELL vbell off defutf8 on caption always caption string "%{= wk}%w" I have tried using defscrollback here with different values, but doesn't have an effect. some .bashrc settings: set -o physical export TERM=xterm-color shopt -s checkwinsize

    Read the article

  • How to share files between cPanel accounts?

    - by Darren
    I am setting up a multi-site/multi-store Magento installation, and I want each site to have its own cPanel account so I can setup the SSL and dedicated IP properly. I have tried to create a linux group called 'magento' and changed the files I need to share to that group (even added the users to that group), however when I try to access files through my scripts on those accounts it doesn't acknowledge the files exist. I first made a soft symbolic link which didn't work and then including them to their real location but it didn't work. Am I missing a step in allowing which users can access which files? I added the users to the magento group and like I said changed the group of the files I need to share to them but it's still not working. Thanks, Darren

    Read the article

  • How to share a VPN connection in a VMWare Guest VM with the Host

    - by Jonathan
    The need - This question is relevant for all of those who want to bypass their corporate's annoying VPN, and access their work/corporate network from their private computer, especially if the corporate VPN client software can't run on their private computer. Homework: this question is very similar to this one and this one, which aren't answered :( The challange - Can't run the corporate VPN client from the private computer, so converted the work laptop to a VMWare Virtual Machine. The VPN client is working fine inside the Guest VM, now we want to share it with the Host (the private computer) The specs: * The private computer (Host OS) is Mac OS X Lion 64bit * The corporate laptop (Guest VM) is WinXP 32bit, running in Bridged network mode * The VPN client on the Guest VM is is Checkpoint SecuRemote NGX R60 HFA03 * While the VPN is running in the Guest VM, the Host can still ping the Guest and vice versa

    Read the article

  • What's the proper format for an SPF record?

    - by deltanovember
    Querying my domain I get: The TXT records found for your domain are: v=spf1 ip4:50.22.72.198 a mx:wordswithfriends.net ~all So superficially it appears OK. However I also get the following message SPF records should also be published in DNS as type SPF records. No type SPF records found. I want to make sure things are absolutely airtight. So in addition to TXT records I also want a pure SPF record. However I cannot figure out the format. Placing the same text in an SPF record does not seem to work. Edit: At the moment I have a TXT record but not SPF record. When I cut and paste from TXT straight to SPF I get some type of crazy recursive DNS error so quickly deleted the SPF. I just want to know the correct format. Copying v=spf1 ip4:50.22.72.198 a mx:wordswithfriends.net ~all Straight into an SPF record doesn't work.

    Read the article

  • Suggestions for Troubleshooting WIndows 7 lockups

    - by Craig L
    I've got a Dell Latitude E6500 that was working fine under Vista x64. I got one of the new Seagate 500GB Hybrid SSD/HD 2.5 drives and thought.. hmm.. let's try Win 7 x64 on it. Bottom line: It works great for hours and then it will hard lock. I don't mean BSOD (or whatever the Win7 equivalent is). I mean my screen is displaying a static image (if there is a clock displayed, it will be frozen at the time the lockup occurred) and the mouse and keyboard do not work. Control-Alt-Delete will not work. I have to hold down the power button to reboot. The event log records NOTHING at the time the lockup occurs. Obviously something is happening to the system to cause the lockup, but the default Windows 7 x64 doesn't log it. How can I log the things Windows doesn't normally log in Event Viewer ?

    Read the article

  • Create a form as a worksheet in Excel that adds records to another worksheet

    - by Holden Fenner
    I am trying to create a form in Excel for vehicle requests. What I want to happen is to create one worksheet that is a recreation of the current paper form, but have a clickable button that will enter all the data for the vehicle request as a record on a second worksheet. Conversely, if you know the record number, I want the form to auto-flll the information from that record number. I have the second part figured out, that should be a simple HLOOKUP, but I don't know how to generate the clickable button. Will I need to use scripting for this, or is there an pre-built way of doing this? (As an aside, I know there are other and better ways of accomplishing database work, but the nature of my work makes Excel the best choice)

    Read the article

  • XP shared folders not accessible after BIOS changed

    - by stijn
    Here's what worked for over a year: PC A runs Windows 7, PC B runs Windows XP. Both are on the same subnet behind a router. A uses user account X, but logs in to PC B using the Administrator account. PC B is a Dell Precision 470. A known problem with these is that sometimes when plugging in their power cable they somehow loses all BIOS settings. This happened yesterday. After this happens Windows won't boot, because the default BIOS setting is 'RAID ON' while there is no RAID configured. No problem though, changing the BIOS settings to 'RAID OFF' makes it boot without problems. Note that in the meantime, nothing config-related was changed on machine A. It wasn't even on. Indeed after doing this, everything is fine. Everything includes all normal operations, remote desktop from PC A to PC B, running Synergy between A and B, accessing shared folders from B to A. But accessing the shared folders on B from A does not work any more. I tried pretty much everything I found via Google (fiddling with policies/registry kes/...) but no avail. > ping -a 192.168.2.2 Pinging A [192.168.2.2] with 32 bytes of data: Reply from 192.168.2.2: bytes=32 time<1ms TTL=128 > net view \\192.168.2.2 System error 5 has occurred. Access is denied. > net use /persistent:no K: \\A\myshare /user:A\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:192.168.2.2\USERNAME PASSWORD > net use /persistent:no K: \\192.168.2.2\myshare /user:USERNAME PASSWORD System error 86 has occurred. The specified network password is not correct. A solution to this would be great: I haven't been able to do any work since yesterday ;] update after taking the hard drive out of B and putting it in another Precision 470 with almost exactly the same hardware (at first sight, only the video card differs) the shared folders work.. Putting the disk back into A, same problem remains. Why does this depend on hardware, and more important, on which hardware?

    Read the article

  • Problems with Windows XP Plug and Play devices, maybe relating to MSVCR71.dll

    - by Richard
    I believe this question is unanswered as of now so I appologize if I've overlooked it. I have been having trouble some external devices with windows recently and I'm trying my darnedest to get to the bottom of it. At first, my Zero Tension USB mouse would stop working...as in the laser in the bottom of it would be on and would register movement, but the mouse on the screen wouldn't budge even an inch. At first this would happen randomly and then it would correct itself. As time went on, it became more and more frequent. At some point, the computer would make the "doo doo" sound of plugging or unplugging a USB device when the mouse stopped/started working. I dealt with it for a while and usually if I rebooted my machine, the mouse would work again for a day or two. As more time has gone on, the computer fully does not recognize the mouse AT ALL...I have another mouse that I use with the computer that works just fine and cannot seem to figure out why my Zero Tension mouse has failed. I tried plugging the Zero Tension mouse into my Mac and low and behold, it works without hesitation and never stops on me... Needless to say, I am stumped about this. I figured because I had another mouse I could deal with the loss of my fancy one for now...until my speakers stopped being recognized. I have a set of Logitec speakers that I have plugged into my sound card. Again, every now and again the audio devices would cease to be recognized by my computer, but a reboot would fix the problem. Now my speakers do not work at all with my computer and I feel like it's time to ask for help. My computer seems to be having a neural shutdown...where I can plug in devices and the computer doesn't seem to notice anything wrong, but none of the devices work. I hope this doesn't get any worse! Please help! Also, on a potentially (un)related note, when I start up my machine I get the message "This application has failed to start because Msvcp71.dll was not found. Re-installing the application may fix this problem." in reference to qbupdate.exe I don't know if that DLL being messed up has anything to do with my mouse or speakers, but I figure it might...anyway, thanks in advance for an answer and let me know if I need to clarify anything. Let me sum up: Zero Tension Mouse gradually stopped working Logitec Speakers gradually stopped working MSVCR71.dll seems to be messed up I don't know if any of those are related but any help would be much appreciated

    Read the article

  • How to set up wireless access on a Cisco router

    - by Carlos
    Hi, I've set up my 877W according to the configuration listed in this forum post: IPTV over Cisco 877 (It's the working configuration at the bottom of the post) Note that I have an 877W, so it also has a wireless radio. Now, I've gotten the whole setup to work, so IPTV is working, and I can access the internet via the ethernet ports. Now I'm trying to figure out how to allow access via the dot11radio interface. I've gathered that I basically need to create a bridge group, and bridge the radio to the internet VLAN. However, when I add a bridge-group 2 command to VLAN1, it seems to take down the whole internet VLAN. (The IPTV continues to work.) This makes the router itself inaccessible (I've got a laptop, so no serial) and I end up having to reboot the router. Can anyone tell me how to a) Allow wireless access to the internet (preferably with WEP, to match my old router) b) Determine what makes the router inaccessible when I add the new bridge group c) Forward the IPTV traffic onto a machine on my internet VLAN

    Read the article

  • How Do I Restrict Repository Access via WebSVN?

    - by kaybenleroll
    I have multiple subversion repositories which are served up through Apache 2.2 and WebDAV. They are all located in a central place, and I used this debian-administration.org article as the basis (I dropped the use of the database authentication for a simple htpasswd file though). Since then, I have also started using WebSVN. My issue is that not all users on the system should be able to access the different repositories, and the default setup of WebSVN is to allow anyone who can authenticate. According to the WebSVN documentation, the best way around this is to use subversion's path access system, so I looked to create this, using the AuthzSVNAccessFile directive. When I do this though, I keep getting "403 Forbidden" messages. My files look like the following: I have default policy settings in a file: <Location /svn/> DAV svn SVNParentPath /var/lib/svn/repository Order deny,allow Deny from all </Location> Each repository gets a policy file like below: <Location /svn/sysadmin/> Include /var/lib/svn/conf/default_auth.conf AuthName "Repository for sysadmin" require user joebloggs jimsmith mickmurphy </Location> The default_auth.conf file contains this: SVNParentPath /var/lib/svn/repository AuthType basic AuthUserFile /var/lib/svn/conf/.dav_svn.passwd AuthzSVNAccessFile /var/lib/svn/conf/svnaccess.conf I am not fully sure why I need the second SVNParentPath in default_auth.conf, but I just added that today as I was getting error messages as a result of adding the AuthzSVNAccessFile directive. With a totally permissive access file [/] joebloggs = rw the system worked fine (and was essentially unchanged), but as I soon as I start trying to add any kind of restrictions such as [sysadmin:/] joebloggs = rw instead, I get the 'Permission denied' errors again. The log file entries are: [Thu May 28 10:40:17 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET websvn:/ [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'joebloggs' GET svn:/sysadmin What do I need to do to get this to work? Have configured apache wrong, or is my understanding of the svnaccess.conf file incorrect? If I am going about this the wrong way, I have no particular attachment to my overall approach, so feel free to offer alternatives as well. UPDATE (20090528-1600): I attempted to implement this answer, but I still cannot get it to work properly. I know most of the configuration is correct, as I have added [/] joebloggs = rw at the start and 'joebloggs' then has all the correct access. When I try to go repository-specific though, doing something like [/] joebloggs = rw [sysadmin:/] mickmurphy = rw then I got a permission denied error for mickmurphy (joebloggs still works), with an error similar to what I already had previously [Thu May 28 10:40:20 2009] [error] [client 89.100.219.180] Access denied: 'mickmurphy' GET svn:/sysadmin Also, I forgot to explain previously that all my repositories are underneath /var/lib/svn/repository UPDATE (20090529-1245): Still no luck getting this to work, but all the signs seem to be pointing to the issue being with path-access control in subversion not working properly. My assumption is that I have not conf

    Read the article

  • Stop jucheck from running

    - by Ken
    I've installed Java on Windows Vista, and every day I get a Vista security warning asking me if I want to run "jucheck". Apparently this is the Java automatic updater. Well, I don't want it to run on its own, ever. I cancel it, and quit it. I right-click on the taskbar and unclick "Check for Updates Automatically", and then click "Never Check", and "Apply". And yet, it never remembers this setting. If I come back to the "Java Control Panel" right after clicking "OK", the very same box is checked again, all on its own. Is there some way to kill jucheck once and for all? If I simply delete jucheck.exe, will Java (other than the automatic check) still work, and will manual updates still work, and will it stop even trying to update every morning?

    Read the article

  • Avoiding double NAT with PPPoA connection

    - by user498429
    I've got an ASUS RT-N56U wending its way to me and have been thinking about how to set this up on my home network. I currently have a Netgear DG634g V5 and was hoping to use this device as a modem only, with everything else being done by the router. Problem is, my ISP uses PPPoA and the asus seems only to support PPPoE. I'm aware that a double NAT configuration should be avoided and I've seen some instructions here: http://www.tomshardware.co.uk/forum/33700-17-ultimate-modem-router-setup-thread Specifically, I was going to follow the guidance in the section entitled "Chaining Two Networks Together In a Cascading Fashion (Modem handles PPPoA)". That seems like it could work. However, is this a double NAT configuration or even a good way to do it? Would UPnP still work? The other option, I understand, is to buy the Draytek Vigor 120 but I'd ideally like to avoid the cost of that if its not necessary.

    Read the article

  • How to make ssh/rsync/etc use a VLAN network interface?

    - by Annan
    A company I work for has a number of virtual servers with ElasticHosts. They are setup in such a way that eth1 is on a private VLAN connecting them to each other. This is so backups sent between servers are not charged at the same rate as external data transfer. My understanding of how VLANs and network interfaces work is sketchy at best. How can I make ssh, rsync, etc. transfer data through the VLAN? My final solution: I spent a while trying to figure this out, For all servers involved, edit /etc/sysconfig/network-scripts/ifcfg-eth1 DEVICE=eth1 BOOTPROTO=static ONBOOT=yes HWADDR=YOUR_MAC_ADDR IPADDR=192.168.0.100 NETMASK=255.255.255.0 Where HWADDR should already be set and the last octate of IPADDR should be different from each other. Then run, on all servers /etc/init.d/network restart After this the IP addresses specified by IPADDR can be used directly as any other IP address.

    Read the article

  • Windows 7 systeminfo reporting incorrect System Boot Time?

    - by rdingwall
    I work 9-5 and switch my PC off when I leave the office each day. When doing timesheets I need to know what time I got to work, so I usually use cmd systeminfo for finding the System Boot Time. Since upgrading to Windows 7 however, it's started reporting bizarre numbers between 11pm-2am instead of 8-9am. Today it says it booted at 11:34pm last night! I checked the event log and there is no entries between when I shutdown at 5:30pm yesterday and booted around 8am this morning. Has anyone else encountered this?

    Read the article

  • How to stop jucheck from running? Java won't remember "Check for Updates Automatically" setting.

    - by Ken
    I've installed Java on Windows Vista, and every day I get a Vista security warning asking me if I want to run "jucheck". Apparently this is the Java automatic updater. Well, I don't want it to run on its own, ever. I cancel it, and quit it. I right-click on the taskbar and unclick "Check for Updates Automatically", and then click "Never Check", and "Apply". And yet, it never remembers this setting. If I come back to the "Java Control Panel" right after clicking "OK", the very same box is checked again, all on its own. Is there some way to kill jucheck once and for all? If I simply delete jucheck.exe, will Java (other than the automatic check) still work, and will manual updates still work, and will it stop even trying to update every morning?

    Read the article

  • Can't change permission/ownership/group of external hard drive on Ubuntu.

    - by MikeN
    I have an external hard drive connected to my Linux box. I wanted to setup a web server to access files on it, but the permission on all files and directories on the drive are "rwx" for the owner which is my local login, and the group is the "root" group. I need the files readable by the apache user, I was trying to set all files to be "chmod a+rwx -R *", but this doesn't do anything (gives no errros, just has no effect.) I tried chaning the group using "chgrp" to my user group, but that won't work either, it gives me errors that I lack permission even when I run all those commands as sudo! What's up with this hard drive??? "sudo chmod a+rwx *" should work on anything, right?

    Read the article

  • Possible to install Xmonad on Ubuntu separate from Gnome?

    - by Kurtosis
    I just downloaded Xmonad from the repository on my Ubuntu 10.04 box, but when I log out and try to log back in using Xmonad instead Gnome, it doesn't work. I just get the login screen background image and a mousepointer, and nothing else. Right-clicking does nothing, no menus or anything. Key combo's like Ctrl-X, Ctrl-Z, and Ctrl-Alt-Delete do nothing either. Left the computer in this state for 30 minutes while I went to the grocery store, but it was still hung when I returned and I had to hard-reboot it. A Google search returned a few sites showing how to configure Xmonad to work with Gnome, but I'm afraid to try this since I don't want to risk borking my Gnome installation, at least not until I've had a chance to learn Xmonad a bit. Is it possible to run Xmonad independently of Gnome? If so, anyone have any idea what might be wrong and how to fix it?

    Read the article

  • How do I share a complete XP disk so it can be seen from a Windows 7 system?

    - by Ian Ringrose
    This should be easier! (both computers can see the internet etc so I know the network it’s self is working) I have a normal home network with a Windows XP machine on it and the new Windows 7 (64 bit) machine. So I can transfer the files to the new Windows 7 machine, I wish to share the complete disk (and all files) from the Windows XP machine and access them from the Windows 7 machine. Is there a step by step set of instructions for doing this anywhere? So fare I have: put both computers into the same workgroup put the windows 7 machine into work network mode so it can see the XP machine in the work group shared the XP disk as read only But when I try to access a lot of the folders on the XP disks, I am told I am not allowed to access them. (I was not asked for any passwords by the windows 7 machine when I accessed the XP machine. The XP machine just has its default account with no password set on it)

    Read the article

  • How to pass an argument to a Windows Scheduled Task with spaces in it

    - by Rodney
    I need to set up a Windows Scheduled Task. It accepts 1 parameter/argument which is a path and can contain spaces. My Scheduled task does not work - it "breaks" the parameter up at the first space. If I run it in the Command Prompt I can just wrap the argument in " " and it works fine, however, this does not work in the Scheduled Task UI. e.g. C:\Program Files\xyz\FTP File Transfer\FTPFileTransferTask.exe "C:\Program Files\xyz\The Interface\Folder Path" I have tried wrapping the argument with " " ' ' [ ] () and have tried filling in the spaces with %20, ~1 etc. with no luck. I know of one solution to make a bat file and use " " around my argument but I don't want to add more complexity. I tried it on Windows 7 and Windows 2008 Server and both failed. There seems to be no discussions on this?

    Read the article

< Previous Page | 428 429 430 431 432 433 434 435 436 437 438 439  | Next Page >