Search Results

Search found 11986 results on 480 pages for 'desktop'.

Page 434/480 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

• Incorrect Internal DNS Resolution

  - by user167016

  I'm having a DNS issue. Server 2008 R2. The first clue was that after being off the network for a month, I could no longer Remote Desktop into my workstation by name, it wouldn't find it. Both via VPN and internally. But if I connect using its IP, that works. Now I notice in the server's Share and Storage Management, in Manage Sessions, it's displaying the incorrect computer name for some users. So I try, for one example: Ping -a 192.168.16.81 Pinging BOBS_COMPUTER.ourdomain.local [192.168.16.81] with 32 bytes of data: - replies all successful Then I try Ping RICHARDS_COMPUTER Pinging RICHARDS_COMPUTER.ourdomain.local [192.168.16.81] with 32 bytes of data: -all replies successful In DHCP, .81 belongs to RICHARDS_COMPUTER I did try flushdns. Not sure if this is related, apologies if it's not, but when I try to connect, I also get prompted: "The identity of the remote computer cannot be verified. Do you want to connect anyway? The remote computer could not be authenticated due to problems with its security certificate. It may be unsafe to proceed.." It then lists the correct name as the name in the certificate from the remote computer, but claims that the certificate is not from a trusted authority. Any thoughts are most appreciated!

  Read the article

• Debugging methods for Windows XP hangups

  - by Cooper

  I experience occasional 'freezes' on my desktop machine (Windows XP SP3). I've tried the normal debugging methods I know (watching Process Explorer, running ProcMon (hard to get a good trace because the hangups are so intermittent). Are there any additional system debugging methods that might be useful in discovering what would cause these hang ups? While this question is more about debugging methods than the actual issue itself (which is probably more of a superuser question), the symptoms of the hangup are: All windows become non-responding. Can be brought the foreground, but do not repaint. Taskbar/explorer windows are non-responsive Ctrl+Alt+Del, Ctrl+Shift+Esc, Win+L, do not do anything (though the actions are queued up, and when the system unhangs, they are performed) Oddly enough, usually I can still scroll through the current page I have open in Google Chrome, but I cannot change tabs. Hangup can happen when I have tons of apps open, but also when I only have Outlook, Chrome, and MS Communicator (plus all the corporate spyware). Usually the hang lasts between 30sec and 3 minutes or so. After which I can continue working as usual.

  Read the article

• OSX server setup suggestions

  - by Tom

  I am looking into the possibility to setup an OSX server for my employees, and would like some input on what is the best approach to meet my needs, and perhaps some suggestions if I am moving in the wrong direction. I am thinking of a Mac Mini OSX server, and are not sure if my needs will be met, and what possibilities are out there. I want these capabilities: - Groups/Users managed on server - Shared folders and private folders for users/groups - Access to activated services - Server hosting software for the users (developing tools ++) - Similar to Windows Terminal Server - Virtual desktop environment (both local and over internet/VPN) - Possible to access trough Mac and Windows The reason I am looking at OSX server is that my employees almost only work in OSX environment, and I want to offer the capabilities to logon to the server trough some kind of terminal software, and have full access to their work OSX environment and software on their mac or pc, from anywhere they might be. Instead of having to have multiple setups and need for spending alot of time installing and setting up needed software on every client. This is a small business, where some work on local network, and others from the internet, preferably trough VPN. But a terminal server solution, that are fast and easy to manage would be perfect for our needs. So if anyone have any experience with a similar setup, please let me know what you did, and your experiences with your setup.

  Read the article

• Windows 7 permissions and Samba domain

  - by Nimzo

  I'm the main desktop support in an office of mixed MacOS and WinXp machines, about 60. I'm new to Windows 7. Currently our XP users are admins on their own machines, and my boss is wanting us to get away from that now that we're going to Windows 7 (64bit). My boss is largely absent from my day-to-day work, so I'm here looking for help =) I have numerous unattended .cmd scripts that we run from a server share, unattended software installs. Some run at login, some have to be run manually. With the NetworkAdmin account logged on to the computer, I am able to run the .cmd files and install stuff just fine. With my test account logged on (Power User), I cannot run the .cmd file - I get an Access Denied. When I change my test account to an Admin on the machine, I still get access denied. However, the test account can simply double-click the .exe and install the software just fine, as admin. Power User can't install anything. How do I fix it so that any power user or admin on the machine can run anything as long as it's on our shared software drive?

  Read the article

• New i7 is slower than old Core 2 Duo? Why? (BIOS programming)

  - by DrChase

  I've always wondered why the companies who make BIOS' either have terrible engineering psychologists or none at all. But without wasting your time further with random speculative questions, my real question is as follows: Why does my new computer run slower than my old computer? Old Computer: Intel Core 2 Duo CPU @ 3.0 Ghz (stock) 4GB OCZ DDR2 800 RAM Wolfdale E8400 mb nVidia GeForce 8600 GT New Computer: Intel Core i7 920 @ ~3.2 Ghz 6 GB OCZ DDR3 1066 RAM EVGA x58 SLI LE motherboard nVidia GeForce GTX 275 Vista x64 Home Premium on both. "Run slower" is defined as: - poorer FPS performance in the same games, applications - takes longer to start up - general desktop usage (checking email, opening up files, running exe's) is noticeably slower At first I thought I must've not set something up in the BIOS or something. But I have no idea how to set anything in the bios except for "Dummy O.C.", which brought me to ~3.2 Ghz. But beyond that I have no idea. I've been reading stuff about "ram timing" and voltages and the like but I really have no idea about that stuff. I'm a psychologist who has a basic understanding in building his own computers, not a computer scientist. Can someone give me some wisdom that might guide me to the reason my new computer is worse than my older one? I'm sorry if this is a bad question, or not appropriate to SO. I'm just pretty frustrated now and you all have helped me in the past so I figured I'd give it a shot. Thanks for your time.

  Read the article

• Cannot connect to a shared network drive

  - by dublintech

  I am using windows 7, I cannot connect to a shared network drive on another machine. I can ping the machine. I can remote desktop connect to the machine. The machine is on the same subnet My friend with the exact same laptop as me (and on the same network, same workgroup) can connect to the shared folder. The machine I am trying to connect to and my friends machine can both see shared folders on my machine. I also cannot see shared folders on the friends laptop. When I select diagnose, windows tells me nothing useful. When I select see details on the error pop up, I see: Error code: 0x80004005 (google doesn't help much) I can nbtstat -a the machine who has the shared folder. When I try with my firewall turned off the same happens. I have ensured my windows 7 has all updates. I run security essentials to ensure my laptop is clean. I run ccleaner to clean up my registry. Same error. I have tried with my laptop on both wireless and ethernet. As you can imagine, I am banging my head against the wall on this one.

  Read the article

• What should I use to ping multiple IPs and get notified of time outs?

  - by HumanVirus

  I've been using MultiPing to ping hundreds of IPs (from access points and such) and check their performance (packet loss, latency) and uptime. The program is very easy to use, but I was wondering if someone could recommend me something that would work better and that would also work in Linux. The features I'm looking for are: Notification Types: At least desktop notifications and SMS, but it would be great if it also had e-mail, IM, or other types of notifications. (MultiPing has some of these, but they don't work too well.) Being notified about the root problem only: Since some devices are dependent on others, I'd like to be notified only about the root problem. E.g. Let's say I have A[x.x.x.222]B[x.x.x.33C[x.x.x.44]D[x.x.x.55], and B goes down, therefore C and D will also be down. Is it possible to get a notification only about B being down? Light on resources. Ideally multiplatform or at least available for both Linux and Windows. I've heard about Nagios and Shinken being used for monitoring. Would you recommend that I use something of the sort or would that be too much for my needs? If using Nagios, Shinken, or similar software is recommended, can anyone tell me what sites I should go to or what books I should get that would be good for someone who is totally new at this? I'd appreciate any suggestions.

  Read the article

• how can a web page change my mouse speed?

  - by Tekaholic

  I usually have many tabs open in Firefox and I haven't been able to find one specific website that causes this because I don't seem to notice it right away. I'm going to click on something on my desktop and I am lifting up the mouse several times to get across the screen. It doesn't seem to matter what program I might be using because this happens on all desktops and in Firefox, too. So I go in my settings and I turn up the mouse speed all the way and it's still not really acceptable. It doesn't matter if I click on different tabs but when I close the browser, my mouse is way too sensitive, like I'd expect at the max setting. Then I go back to Control Center and return my mouse speed and acceleration to normal. When I restart my browser, the mouse remains normal. So is there something to this before I start wasting my time hunting through my history to discover which website or sites are having this effect? ...and if it is a specific site and I locate it, what can I change to stop it's effect on my mouse besides not visiting it? I am using Linux Mint 13 on a box with an AMD Athlon processor and 2gigs of ram. I never installed another browser because everything works for me.

  Read the article

• Can't connect to wi-fi hotspot in Ubuntu 11.10

  - by ht3t

  I'm new to Ubuntu. I'm having a wireless network problem in Ubuntu 11.10. I made a hotspot using Connectify from a computer which is running Windows 7. I can access it in Windows 7 but not in Ubuntu 11.10. Every time I access it,I get a message "disconnected". I'm using msi fx 400 notebook with Intel Centrino wireless -N 1000 wireless card. Ubuntu version is 11.10 with KDE desktop. $ sudo lshw -c network [sudo] password for ht3t: *-network description: Wireless interface product: Centrino Wireless-N 1000 vendor: Intel Corporation physical id: 0 bus info: pci@0000:06:00.0 logical name: wlan0 version: 00 serial: 00:26:c7:56:b8:f0 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress bus_master cap_list ethernet physical wireless configuration: broadcast=yes driver=iwlagn driverversion=3.0.0-12-generic firmware=39.31.5.1 build 35138 latency=0 link=no multicast=yes wireless=IEEE 802.11bgn resources: irq:44 memory:e7400000-e7401fff *-network description: Ethernet interface product: RTL8111/8168B PCI Express Gigabit Ethernet controller vendor: Realtek Semiconductor Co., Ltd. physical id: 0 bus info: pci@0000:07:00.0 logical name: eth0 version: 06 serial: 40:61:86:b6:b1:a2 size: 100Mbit/s capacity: 1Gbit/s width: 64 bits clock: 33MHz capabilities: pm msi pciexpress msix vpd bus_master cap_list ethernet physical tp mii 10bt 10bt-fd 100bt 100bt-fd 1000bt 1000bt-fd autonegotiation configuration: autonegotiation=on broadcast=yes driver=r8169 driverversion=2.3LK-NAPI duplex=full firmware=rtl_nic/rtl8168e-2.fw IP=192.168.21.107 latency=0 link=yes multicast=yes port=MII speed=100Mbit/s resources: irq:41 ioport:9000(size=256) memory:e6004000-e6004fff memory:e6000000-e6003fff I can't do anything without internet connection. How can I fix this?

  Read the article

• Need some help figuring out BB4Win or any of its varieties: does it replace windows explorer?

  - by StormRyder

  I don't really care too much about replacing original Windows the desktop, taskbar and system tray. I really dislike the new Win7/Vista Windows Explorer: Screenshot here (just to make sure there's no confusion) So, what I'm trying to figure out is whether BB4Win or its plugins have a replacement for it. The bb4win website pretty much doesn't make sense to me. I'm using Win7 64 bit. Also, off-topic ... I was looking at a related question on this site here: Good Windows shell replacement Why can't I add comments? I wanted to ask the same question I'm asking now as a comment under the answer given by Molly7244, the person who answered with suggesting BB4Win. But there seems to be no way to add new comments anywhere! Why? Am I missing something? I don't quite understand the weird way this site is set up... I'm used to the more typical forum format. Sorry. Thanks for any help!

  Read the article

• How can I tell System Restore in WIndows 7 recovery console to use my recovered backup drive's restore point data?

  - by Rich Shealer

  My Windows 7 desktop PC failed to boot. It would get to a grayish screen with a mouse and would only respond to the power button. After much examination I found that the problem was not a failed drive as running CHKDSK from the Recovery Console on my main drives passed without any errors. I had been installing various Java version in the days before the failure so I decided to use a restore point to roll backwards. I have an external SATA drive controller with two 2 TB drives mirrored using the Windows mirroring function. My system has been backing up to this drive regularly. The problem is I accidently broke the mirror when testing to see if this drive system might have been causing my boot issue. Connecting it to another machine showed two dynamic drives that were invalid. In the end I reformatted one as an NTFS basic disc and used recovery software on the other to copy all of the files to the reformatted drive. I had to copy the restore points into the new drive's System Volume Information folder by granting rights to that user. I moved the drive back to the original machine and rebooted. I can see my new drive, it even uses the same drive letter as it did in normal mode. Running System Restore it lists a new Automatic Restore point created while sitting at the RC along with all of my backups. Selecting the backup I want (or any other) I get a dialog. The backup drive could not be found. System Restore is looking for restore points on your backup. Make sure the backup drive is on and connected to this computer and then click OK. What do I need to do to allow system restore to see the restore points?

  Read the article

• Executing a git command using remote powershell results in a NativeCommmandError

  - by user204777

  I am getting an error while executing a remote PowerShell script. From my local machine I am running a PowerShell script that uses Invoke-Command to cd into a directory on a remote Amazon Windows Server instance, and a subsequent Invoke-Command to execute script that lives on that server instance. The script on the server is trying to git clone a repository from GitHub. I can successfully do things in the server script like "ls" or even "git --version". However git clone, git pull, etc. result in the following error: Cloning into 'MyRepo'... + CategoryInfo : NotSpecified: (Cloning into 'MyRepo'...:String) [], RemoteException + FullyQualifiedErrorId : NativeCommandError This is my first time using PowerShell or a Windows Server. Can anyone provide some direction on this problem. The client script: $s = new-pssession -computername $server -credential $user invoke-command -session $s -scriptblock { cd C:\Repos; ls } invoke-command -session $s -scriptblock { param ($repo, $branch) & '.\clone.ps1' -repository $repo -branch $branch} -ArgumentList $repository, $branch exit-pssession The server script: param([string]$repository = "repository", [string]$branch = "branch") git --version start-process -FilePath git -ArgumentList ("clone", "-b $branch https://github.com/MyGithub/$repository.git") -Wait I've changed the server script to use start process and it is no longer throwing the exception. It creates the new repository directory and the .git directory but doesn't write any of the files from the github repository. This smells like a permissions issue. Once again invoking the script manually (remote desktop into the amazon box and execute it from powershell) works like a charm.

  Read the article

• PCI-E riser card prevents server from starting at all

  - by user68623

  I need to replace the RAID controller in a server, and the new one is PCI Express while the old one was 64bit PCI. The server has both slots, but the riser card that was installed does not contain the PCI Express part. So I bought a new 4x PCI Express riser card (Delock 89103), but the moment I put it into the slot the server does not start up at all. It does not even get to POST, at most the power LED flashed once but nothing else happens at all. It does not power up the server at all. If I remove the riser card it starts up fine. If I put the riser card into a regular desktop computer it seems to work in general. Is there anything else I have to pay attention to when buying a riser card? My naive assumption would be that any PCI Express riser card should work. Or is my riser card likely to be damaged or out-of-spec and the server is just more picky? How do I get it to work, or how can I at least find a riser card that will work with my server? The server mainboard is a Super Micro PDSMi+.

  Read the article

• Windows 7 computer apparently connected to working wireless network but can't access router page or internet

  - by Hemmer

  I can consistently connect successfully to both the router and the internet using both my phone and two different computers which strongly suggests that the issue is at the desktop end. Only my Windows 7 desktop machine has stopped getting internet connectivity. It manages to connect to the router's network using the Windows 7 wireless dialog, but can't access either the router configuration page (192.168.1.1) or the internet in general once connected. The strange thing is the wireless network icon in the notification bar shows a full strength signal, sometimes with the yellow warning triangle. The output of ipconfig /all is: Wireless LAN adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-12-17-94-98-90 DHCP Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IPv4 Address. . . . . . . . . . . : 192.168.1.102(Preferred) Subnet Mask . . . . . . . . . . . : 255.255.255.0 Lease Obtained. . . . . . . . . . : 08 June 2011 10:32:16 Lease Expires . . . . . . . . . . : 08 June 2011 12:32:16 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 NetBIOS over Tcpip. . . . . . . . : Enabled I've tried renewing DCHP settings disabling IPv6 resetting TCP stack uninstalling and reinstalling WLAN card drivers I've not installed anything new or made any changes to my knowledge, this just happened out of the blue. The only possible change is my friend connected his macbook to the network, but that has gone now and shouldn't have any lasting effects? TCP/IPv4 is set to automatically find an IP address. Antivirus is MSE (up to date) and doesn't detect anything unusual. Any ideas where to go next? Any help is greatly appreciated. For reference, the results of ipconfig /all on one of the working computers is: Ethernet adapter Wireless Network Connection: Connection-specific DNS Suffix . : Description . . . . . . . . . . . : Broadcom 802.11g Network Adapter Physical Address. . . . . . . . . : 00-16-CF-67-E5-97 Dhcp Enabled. . . . . . . . . . . : Yes Autoconfiguration Enabled . . . . : Yes IP Address. . . . . . . . . . . . : 192.168.1.100 Subnet Mask . . . . . . . . . . . : 255.255.255.0 Default Gateway . . . . . . . . . : 192.168.1.1 DHCP Server . . . . . . . . . . . : 192.168.1.1 DNS Servers . . . . . . . . . . . : 194.168.4.100 194.168.8.100 Lease Obtained. . . . . . . . . . : 08 June 2011 10:26:38 Lease Expires . . . . . . . . . . : 08 June 2011 12:26:38 UPDATE: Still not working, but I've managed to find a temporary workaround by tethering my Android phone, effectively becoming a new wifi adapter. Will be moving to a new flat so will test if it is a network specific thing - maybe the card has got damaged somehow? Also will see if the card is working with Linux soon.

  Read the article

• Mac OS X - Time Machine backup fails verification - What can I do to save the history?

  - by usermac75

  Hi, How do I make Time Machine to make a new complete backup without losing older versions of backed up files? Verbose: I am using the Time Machine backup on my OS X (Snow Leopard) to backup the whole computer to an external drive. I especially like the "history", i.e. the feature that allows you to restore the older version of a file. Problem: I had some data corruption on my external backup drive, I repaired it with the System Tool for doing that, it found some faults. I had the disk tool repair the external drive. After that, the external drive was OK and I could use Time Machine again. I let Time Machine do one more backup. Now I made a verification according to http://superuser.com/questions/47628/verifying-time-machine-backups, namely along sudo diff -qr . $HOME/Desktop 2>&1 | tee $HOME/timemachine-diff.log However: After doing the command above, several differences and missing files were reported, approx. 200 files in sum. Whereas some of the missing files were cache or excluded directories, the differences do bother me, especially as some important documents from me are listed as differing. How can I make sure that the data on the external drive is synced correctly? Is it possible to have Time Machine to do a complete new backup without losing the history? Or to have Time Machine compare all files for differences and re-write all files that are different? Or can I set some flags on the files that do not match to have them copied again? (like the archive-flag in Windows/Dos). I'd rather not touch the files because I would like to keep the date of last change/date of creation) Thank you for your thoughts!

  Read the article

• Changing the name of a binary packaged application and its evoking command

  - by jerkstore

  I have taken the source code of a large project, App A, and made many modifications to it to produce my version, App B. Both App A and App B compile cleanly on Debian and Red Hat and now I would like to build binary packages for both platforms. The last modification I need to make is ensuring App B can be installed alongside App A without any interference. I should be able to evoke both application-a and application-b in the terminal and have both be listed as separate software in whatever desktop environment is present. The projects have a debian/ folder (containing rules, control, etc.) and an rpm/ folder containing a SPEC file. Currently, building and installing the .rpm and .deb packages works except that App B is recognized as App A and therefore does not meet the aforementioned requirements. ldd shows the programs have the same exact dependencies and I am not able to pursue static linking of libraries. What modifications do I need to make to my project to achieve the desired outcome? Please be specific as I do not have much experience with the packaging process.

  Read the article

• How do I disable DirectDraw and Direct3D acceleration on Windows 8? [closed]

  - by Favourite Chigozie Onwuemene

  Some old games that i would really like to play run slowly on some graphic drivers when direct3d acceleration is enabled. I have tried many suggestions but none seems to work. The only thing i have not tried is disabling direct3d acceleration. Is it possible to disable DirectDraw and Direct3D acceleration on my Windows 8 pc? There are certain bad versions of GeForce drivers that cause this problem. This is a problem in the drivers themselves and is unfortunately completely outside our control. The recommended way to fix this problem is to update your graphics card drivers (go to NVIDIA's web site for this). Alternatively, there is a workaround that alleviates or solves the slowdown problem altogether. Try this: Right-click on your desktop and select "Properties". Go to the "Settings" tab and click on "Advanced...". Click on the "Troubleshooting" tab and move the slider to the left until it says that all DirectDraw and Direct3D accelerations have been disabled (around the middle of the range). Finally, click on "OK". Note that this workaround might cause other games on your computer to slow down, so you may have to switch back and forth between settings, but it's certainly worth a try if you can't obtain an updated graphics driver. -source: interactionstudios

  Read the article

• Accessing CIFS shares from an OS X machine incredibly slow

  - by Aron Rotteveel

  This is a longshot, because this issue seems over-reported and unanswered on the internet (see references below), but it is about time this issue is permanently solved. The facts: Server: Windows Server 2008, acting as a file server Client: OS X Lion 10.7.3. Method of connecting: directly via IP through Finder: smb://192.168.1.100/share The problem: The initial connection attempt takes about a minute. After the connection is made, it takes one more minute to show the directories in Finder. After navigating to any other directory, it takes several seconds/minutes to parse the directory, seemingly based on the size of the contents. Actually, my entire Finder has this problem after connecting. When using Finder to show my desktop, it can literally take up to a minute to load. Obviously, this is not right. I have no clue how to fix this and would appreciate any help I can get. I am unsure about other relevant information I can provide, but if there is any, please let me know so I can update the post. I seem to be not the only one having this problem: Most importantly, an apple.stackexchange.com entry. Unsolved and unanswered. Several users on the Apple support forums. Users on EduGeek.

  Read the article

• Fixing bent pins on a CPU

  - by Pekka

  While replacing a mainboard in a desktop machine (see related question), I did something stupid. I inserted the CPU into the new mainboard, but didn't check for the right position. When it didn't immediately lock in, I pressed slightly before realizing what was wrong. The result was a number of bent pins. I tried every tutorial that popped up when Googling "CPU bent pins" - using credit cards, sewing needles, and a hunting knife to get the pins back into position - but to no avail: For every pin I get straightened out, two others are bent. I have no problem getting individual pins straightened out, but my many attempts have led to many pins being slightly askew - enough for the CPU not to fit into the socket (An AMD X3 one). Maybe I just lack the motoric finesse. What I would need is some sort of a grid to fix all pins at once. It's a €50 processor so the loss is not catastrophic. But I thought before I go buy a new one, I thought I'd check here whether anybody knows some magic trick, or a cheap generally-available tool to fix this.

  Read the article

• Two video card on one Mobo

  - by InfinityKing

  I recently purchased a new HP Pavilion p6-2265eo. It was then that I realised that it has only one DVI and one HDMI output.. I will connect my TV with the HDMI. so I am letft with only one DVI output. I need to have two monitors. Please help. Should I purchase a new video card and install it? My knowledge is limited. The specifications of my comp says that there is 1 x PCI-E x16, 3 x PCI-E x1. 1) I suppose that the video card already present in my purchase is connected on the PCI-E x16. Am I right? I dont want to open my desktop right now and check it for myself as it can void the warrenty. so I need an experienced person to tell me that. 2) I have an old nvidia geforce 7200 gt. Is it possible for me to connect it to my left over PCI-E x1? I searched for PCI-E x1 on the net and as far as I can understand the slot is too small for my old nvidia geforce 7200 gt graphic card. 3) what are the options? Please help this dummo :) Thankign you in advance,

  Read the article

• some HTTPS sites getting blocked on one machine in network

  - by shadowfoxmi

  I have a few computers connected to the internet via a router. I have been having some trouble with this one Windows 7 desktop. I can browse most of the sites without any trouble but some sites where the sign in page switches to a secure connection (https), the page does not load. It's not all of the sites though. I'm able to sign into gmail and a few other services that I know use https . The sites I'm having trouble with; yahoo's sign in page and the one that I have been using to test across different systems, http://iforgot.apple.com (which switchs to https) ;this particular site, i can access from other computers on the network and my phone. I only have windows firewall running and AVG. I even tried to stopping windows firewall but it did not help. Everything was fine last week. All I have installed in the past week is VOIP softwares namely skype, ooVoo and windows live messenger. I'm not sure how to find out what's being blocked and why and how to unblock it? Any suggestions would be greatly appreciated.

  Read the article

• Ubuntu 9.10 won't reboot after replacing a failed drive

  - by user149041

  Hello Serverfault community. I hope someone can shed light on a peculiar problem I am having with an Ubuntu 9.10 server install. I am not a Linux expert but have the responsibility of fixing the box if something goes wrong. DOH! I have Ubuntu 9.10 server installed on on a desktop platform: Compaq Presario SR5027CL. There are two 1TB SATA drives configured in a RAID 1 array; I use the box as an email backup server for a small group of users. Last week one of the drives failed and was replaced with a new drive of the same type. The problem I have been having is getting the box to reboot after a restart or a shutdown halt. The OS and the RAID 1 array are on the same drives that make up the RAID 1 array. The replacement drive (sda) was added to the box and the partitions were created to match the existing good drive (sdb). The array is made up of sda1 and sdb1. I found an interesting point while checking the BIOS settings: there is a "HDD Boot Group Priority" section, and the new drive was selected as the "1. 3rd master"; the server wouldn't boot configured like that, but when I set the old drive to be "1. 4th master", the box will reboot. I'm checking some more things, but I would certainly appreciate any useful information. Thanks in advance.

  Read the article

• schroot build environment setup how to avoid bind-mount home

  - by minghua

  The recent linux distributions such as Fedora and Ubuntu all use chroot environment to make the build. Because when making the build often it needs to install some special tools, and to install to the existing system. Using chroot avoids making any changes to the host system. To set up such a build environment, the first step is to make a chroot. I'm following the setup guide at https://wiki.debian.org/Schroot [wheezy-test] description=Contains the SPICE program aliases=test type=directory directory=/srv/chroot/test users=jsmith root-groups=root script-config=desktop/config personality=linux preserve-environment=true In the host on my setup the /home is on /dev/mapper. When schroot is entered, the same home is bind-mounted. Is there a way to avoid this? I prefer to use a different /home inside chroot. When changing the type from directory to plain, the binding is not performed. However that also loses /proc, /sys, etc. You'd have to manually bind-mount them. That does not seem to be a good solution. If a simple configuration change is unavailable, any idea where the script is for type=directory? Probably I'll manually modify the script. Thanks in advance for any answers or hints!

  Read the article

• How to remove all data that a website stores on a PC? [on hold]

  - by s.r.a

  I was a member in a computer forum website (sevenforums.com) for months. Two days ago I created a thread and many members participated in it, some of them asked me some irrelevant questions and I said “this question is irrelevant” and didn’t get them the answer. Thread finished and I could get the answer from another website and posted it to that website to arise members’ knowledge. Yesterday like every day I went to that website and faced a massage which was banning me, and my account was disabled. I shocked and I didn’t have even any option to appeal against that wrong decision. So I had to do something. And I did the following works: 1- I disconnected my Internet connection and cleared all the history data on the browser I use, the Google chrome. 2- I then ran “ccleaner” tool and marked almost all the options and then clicked on “run” button. Then it cleared all the data including the cookies. 3- I connected the machine (desktop) to the Internet and immediately changed my IP address. 4- I created a new Hotmail account and tried to register as a new member to that website (sevenforums.com). 5- I succeeded and my new account was enabled so I start to posting to that website. But unfortunately, after less than 1 minute I faced this message: “You are already banned”! My question is that, how they could know me again? How to create a new account without they know me? Thanks in advance.

  Read the article

• Create taskbar shortcut to website in Window 7

  - by BJ292

  I'd like to create a shortcut to a website in Windows 7 on the taskbar that is not pinned to the default web browser. Currently if I drag the favicon from the left end of the firefox address bar to the Win 7 taskbar it will pin a shortcut to the firefox browser icon. Similarly if I create a shortcut on the desktop to a website and drag it to the taskbar it will also end up pinned to the firefox icon. The problem with this is to get to that shortcut I have to right click on the firefox icon and then select the pinned shortcut. That is workable for me but I want to do this for a child - so the shortcut needs to be right there on the taskbar as a stand-alone item. There is a workaround that pretty much solves the problem - create a new folder somewhere safe - create the shortcut to the website in the new folder - right click the taskbar and select toolbars - new toolbar - then browse to the folder you created and select it as the new toolbar. The contents of the folder will now appear on the taskbar as shortcuts. You need to drag it from the right hand end of the taskbar into the middle - turn off show titles and show text and make the icon large. I'd call this a 75% solution. Anyone know how to make a web shortcut that looks and operates just like any of the other shortcuts on the taskbar?

  Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >