Search Results

Search found 11313 results on 453 pages for 'rampant creative group'.

Page 434/453 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

• To SYNC or not to SYNC – Part 3

  - by AshishRay

  I can't believe it has been almost a year since my last blog post. I know, that's an absolute no-no in the blogosphere. And I know that "I have been busy" is not a good excuse. So - without trying to come up with an excuse - let me state this - my apologies for taking such a long time to write the next Part. Without further ado, here goes. This is Part 3 of a multi-part blog article where we are discussing various aspects of setting up Data Guard synchronous redo transport (SYNC). In Part 1 of this article, I debunked the myth that Data Guard SYNC is similar to a two-phase commit operation. In Part 2, I discussed the various ways that network latency may or may not impact a Data Guard SYNC configuration. In this article, I will talk in details regarding why Data Guard SYNC is a good thing. I will also talk about distance implications for setting up such a configuration. So, Why Good? Why is Data Guard SYNC a good thing? Because, at the end of the day, this gives you the assurance of zero data loss - it doesn’t matter what outage may befall your primary system. Befall! Boy, that sounds theatrical. But seriously - think about this - it minimizes your data risks. That’s a big deal. Whether you have an outage due to bad disks, faulty hardware components, hardware / software bugs, physical data corruptions, power failures, lightning that takes out significant part of your data center, fire that melts your assets, water leakage from the cooling system, human errors such as accidental deletion of online redo log files - it doesn’t matter - you can have that “Om - peace” look on your face and then you can failover to the standby system, without losing a single bit of data in your Oracle database. You will be a hero, as shown in this not so imaginary conversation: IT Manager: Well, what’s the status? You: John is doing the trace analysis on the storage array. IT Manager: So? How long is that gonna take? You: Well, he is stuck, waiting for a response from <insert your not-so-favorite storage vendor here>. IT Manager: So, no root cause yet? You: I told you, he is stuck. We have escalated with their Support, but you know how long these things take. IT Manager: Darn it - the site is down! You: Not really … IT Manager: What do you mean? You: John is stuck, but Sreeni has already done a failover to the Data Guard standby. IT Manager: Whoa, whoa - wait! Failover means we lost some data, why did you do this without letting the Business group know? You: We didn’t lose any data. Remember, we had set up Data Guard with SYNC? So now, any problems on the production – we just failover. No data loss, and we are up and running in minutes. The Business guys don’t need to know. IT Manager: Wow! Are we great or what!! You: I guess … Ok, so you get it - SYNC is good. But as my dear friend Larry Carpenter says, “TANSTAAFL”, or "There ain't no such thing as a free lunch". Yes, of course - investing in Data Guard SYNC means that you have to invest in a low-latency network, you have to monitor your applications and database especially in peak load conditions, and you cannot under-provision your standby systems. But all these are good and necessary things, if you are supporting mission-critical apps that are supposed to be running 24x7. The peace of mind that this investment will give you is priceless, especially if you are serious about HA. How Far Can We Go? Someone may say at this point - well, I can’t use Data Guard SYNC over my coast-to-coast deployment. Most likely - true. So how far can you go? Well, we have customers who have deployed Data Guard SYNC over 300+ miles! Does this mean that you can also deploy over similar distances? Duh - no! I am going to say something here that most IT managers don’t like to hear - “It depends!” It depends on your application design, application response time / throughput requirements, network topology, etc. However, because of the optimal way we do SYNC, customers have been able to stretch Data Guard SYNC deployments over longer distances compared to traditional, storage-centric ways of doing this. The MAA Database 10.2 best practices paper Data Guard Redo Transport & Network Configuration, and Oracle Database 11.2 High Availability Best Practices Manual talk about some of these SYNC-related metrics. For example, a test deployment of Data Guard SYNC over 330 miles with 10ms latency showed an impact less than 5% for a busy OLTP application. Even if you can’t deploy Data Guard SYNC over your WAN distance, or if you already have an ASYNC standby located 1000-s of miles away, here’s another nifty way to boost your HA. Have a local standby, configured SYNC. How local is “local”? Again - it depends. One customer runs a local SYNC standby across the campus. Another customer runs it across 15 miles in another data center. Both of these customers are running Data Guard SYNC as their HA standard. If a localized outage affects their primary system, no problem! They have all the data available on the standby, to which they can failover. Very fast. In seconds. Wait - did I say “seconds”? Yes, Virginia, there is a Santa Claus. But you have to wait till the next blog article to find out more. I assure you tho’ that this time you won’t have to wait for another year for this.

  Read the article

• Metrics - A little knowledge can be a dangerous thing (or 'Why you're not clever enough to interpret metrics data')

  - by Jason Crease

  At RedGate Software, I work on a .NET obfuscator  called SmartAssembly.  Various features of it use a database to store various things (exception reports, name-mappings, etc.) The user is given the option of using either a SQL-Server database (which requires them to have Microsoft SQL Server), or a Microsoft Access MDB file (which requires nothing). MDB is the default option, but power-users soon switch to using a SQL Server database because it offers better performance and data-sharing. In the fashionable spirit of optimization and metrics, an obvious product-management question is 'Which is the most popular? SQL Server or MDB?' We've collected data about this fact, using our 'Feature-Usage-Reporting' technology (available as part of SmartAssembly) and more recently our 'Application Metrics' technology: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 28 19.0 8115 8115 MDB 114 77.6 1449 1449 (As a disclaimer, please note than SmartAssembly has far more than 132 users . This data is just a selection of one build) So, it would appear that SQL-Server is used by fewer users, but more often. Great. But here's why these numbers are useless to me: Only the original developers understand the data What does a single 'usage' of 'MDB' mean? Does this happen once per run? Once per option change? On clicking the 'Obfuscate Now' button? When running the command-line version or just from the UI version? Each question could skew the data 10-fold either way, and the answers only known by the developer that instrumented the application in the first place. In other words, only the original developer can interpret the data - product-managers cannot interpret the data unaided. Most of the data is from uninterested users About half of people who download and run a free-trial from the internet quit it almost immediately. Only a small fraction use it sufficiently to make informed choices. Since the MDB option is the default one, we don't know how many of those 114 were people CHOOSING to use the MDB, or how many were JUST HAPPENING to use this MDB default for their 20-second trial. This is a problem we see across all our metrics: Are people are using X because it's the default or are they using X because they want to use X? We need to segment the data further - asking what percentage of each percentage meet our criteria for an 'established user' or 'informed user'. You end up spending hours writing sophisticated and dubious SQL queries to segment the data further. Not fun. You can't find out why they used this feature Metrics can answer the when and what, but not the why. Why did people use feature X? If you're anything like me, you often click on random buttons in unfamiliar applications just to explore the feature-set. If we listened uncritically to metrics at RedGate, we would eliminate the most-important and more-complex features which people actually buy the software for, leaving just big buttons on the main page and the About-Box. "Ah, that's interesting!" rather than "Ah, that's actionable!" People do love data. Did you know you eat 1201 chickens in a lifetime? But just 4 cows? Interesting, but useless. Often metrics give you a nice number: '5.8% of users have 3 or more monitors' . But unless the statistic is both SUPRISING and ACTIONABLE, it's useless. Most metrics are collected, reviewed with lots of cooing. and then forgotten. Unless a piece-of-data could change things, it's useless collecting it. People get obsessed with significance levels The first things that lots of people do with this data is do a t-test to get a significance level ("Hey! We know with 99.64% confidence that people prefer SQL Server to MDBs!") Believe me: other causes of error/misinterpretation in your data are FAR more significant than your t-test could ever comprehend. Confirmation bias prevents objectivity If the data appears to match our instinct, we feel satisfied and move on. If it doesn't, we suspect the data and dig deeper, plummeting down a rabbit-hole of segmentation and filtering until we give-up and move-on. Data is only useful if it can change our preconceptions. Do you trust this dodgy data more than your own understanding, knowledge and intelligence?  I don't. There's always multiple plausible ways to interpret/action any data Let's say we segment the above data, and get this data: Post-trial users (i.e. those using a paid version after the 14-day free-trial is over): Parameter Number of users % of total users Number of sessions Number of usages SQL Server 13 9.0 1115 1115 MDB 5 4.2 449 449 Trial users: Parameter Number of users % of total users Number of sessions Number of usages SQL Server 15 10.0 7000 7000 MDB 114 77.6 1000 1000 How do you interpret this data? It's one of: Mostly SQL Server users buy our software. People who can't afford SQL Server tend to be unable to afford or unwilling to buy our software. Therefore, ditch MDB-support. Our MDB support is so poor and buggy that our massive MDB user-base doesn't buy it.  Therefore, spend loads of money improving it, and think about ditching SQL-Server support. People 'graduate' naturally from MDB to SQL Server as they use the software more. Things are fine the way they are. We're marketing the tool wrong. The large number of MDB users represent uninformed downloaders. Tell marketing to aggressively target SQL Server users. To choose an interpretation you need to segment again. And again. And again, and again. Opting-out is correlated with feature-usage Metrics tends to be opt-in. This skews the data even further. Between 5% and 30% of people choose to opt-in to metrics (often called 'customer improvement program' or something like that). Casual trial-users who are uninterested in your product or company are less likely to opt-in. This group is probably also likely to be MDB users. How much does this skew your data by? Who knows? It's not all doom and gloom. There are some things metrics can answer well. Environment facts. How many people have 3 monitors? Have Windows 7? Have .NET 4 installed? Have Japanese Windows? Minor optimizations.  Is the text-box big enough for average user-input? Performance data. How long does our app take to start? How many databases does the average user have on their server? As you can see, questions about who-the-user-is rather than what-the-user-does are easier to answer and action. Conclusion Use SmartAssembly. If not for the metrics (called 'Feature-Usage-Reporting'), then at least for the obfuscation/error-reporting. Data raises more questions than it answers. Questions about environment are the easiest to answer.

  Read the article

• Why Does Adding a UDF or Code Truncates the # of Resources in List?

  - by Jeffrey McDaniel

  Go to the Primavera - Resource Assignment History subject area.  Go under Resources, General and add fields Resource Id, Resource Name and Current Flag. Because this is using a historical subject area with Type II slowly changing dimensions for Resources you may get multiple rows for each resource if there have been any changes on the resource.  You may see a few records with current flags = 0, and you will see a row with current flag = 1 for all resources. Current flag = 1 represents this is the most up to date row for this resource.  In this query the OBI server is only querying the W_RESOURCE_HD dimension.  (Query from nqquery log) select distinct 0 as c1,      D1.c1 as c2,      D1.c2 as c3,      D1.c3 as c4 from       (select distinct T10745.CURRENT_FLAG as c1,                T10745.RESOURCE_ID as c2,                T10745.RESOURCE_NAME as c3           from                 W_RESOURCE_HD T10745 /* Dim_W_RESOURCE_HD_Resource */            where  ( T10745.LAST_RUN_PER_DAY_FLAG = 1 )       ) D1 If you add a resource code to the query now it is forcing the OBI server to include data from W_RESOURCE_HD, W_CODES_RESOURCE_HD, as well as W_ASSIGNMENT_SPREAD_HF. Because the Resource and Resource Codes are in different dimensions they must be joined through a common fact table. So if at anytime you are pulling data from different dimensions it will ALWAYS pass through the fact table in that subject areas. One rule is if there is no fact value related to that dimensional data then nothing will show. In this case if you have a list of 100 resources when you query just Resource Id, Resource Name and Current Flag but when you add a Resource Code the list drops to 60 it could be because those resources exist at a dictionary level but are not assigned to any activities and therefore have no facts. As discussed in a previous blog, its all about the facts.   Here is a look at the query returned from the OBI server when trying to query Resource Id, Resource Name, Current Flag and a Resource Code.  You'll see in the query there is an actual fact included (AT_COMPLETION_UNITS) even though it is never returned when viewing the data through the Analysis. select distinct 0 as c1,      D1.c2 as c2,      D1.c3 as c3,      D1.c4 as c4,      D1.c5 as c5,      D1.c1 as c6 from       (select sum(T10754.AT_COMPLETION_UNITS) as c1,                T10706.CODE_VALUE_02 as c2,                T10745.CURRENT_FLAG as c3,                T10745.RESOURCE_ID as c4,                T10745.RESOURCE_NAME as c5           from                 W_RESOURCE_HD T10745 /* Dim_W_RESOURCE_HD_Resource */ ,                W_CODES_RESOURCE_HD T10706 /* Dim_W_CODES_RESOURCE_HD_Resource_Codes_HD */ ,                W_ASSIGNMENT_SPREAD_HF T10754 /* Fact_W_ASSIGNMENT_SPREAD_HF_Assignment_Spread */            where  ( T10706.RESOURCE_OBJECT_ID = T10754.RESOURCE_OBJECT_ID and T10706.LAST_RUN_PER_DAY_FLAG = 1 and T10745.ROW_WID = T10754.RESOURCE_WID and T10745.LAST_RUN_PER_DAY_FLAG = 1 and T10754.LAST_RUN_PER_DAY_FLAG = 1 )            group by T10706.CODE_VALUE_02, T10745.RESOURCE_ID, T10745.RESOURCE_NAME, T10745.CURRENT_FLAG      ) D1 order by c4, c5, c3, c2 When querying in any subject area and you cross different dimensions, especially Type II slowly changing dimensions, if the result set appears to be short the first place to look is to see if that object has associated facts.

  Read the article

• Oracle HRMS API – Update Employee Assignment

  - by PRajkumar

  To Update Supervisor, Manager Flag, Bargaining Unit, Labour Union Member Flag, Gre, Time Card, Work Schedule, Normal Hours, Frequency, Time Normal Finish, Time Normal Start, Default Code Combination, Set of Books Id API -- hr_assignment_api.update_emp_asg   To Update Grade, Location, Job, Payroll, Organization, Employee Category, People Group API -- hr_assignment_api.update_emp_asg_criteria   Example --   DECLARE    -- Local Variables    -- -----------------------    lc_dt_ud_mode           VARCHAR2(100)    := NULL;    ln_assignment_id       NUMBER                  := 33561;    ln_supervisor_id        NUMBER                  := 2;    ln_object_number       NUMBER                  := 1;    ln_people_group_id  NUMBER                  := 1;      -- Out Variables for Find Date Track Mode API    -- -----------------------------------------------------------------    lb_correction                           BOOLEAN;    lb_update                                 BOOLEAN;    lb_update_override              BOOLEAN;    lb_update_change_insert   BOOLEAN;       -- Out Variables for Update Employee Assignment API    -- ----------------------------------------------------------------------------    ln_soft_coding_keyflex_id       HR_SOFT_CODING_KEYFLEX.SOFT_CODING_KEYFLEX_ID%TYPE;    lc_concatenated_segments       VARCHAR2(2000);    ln_comment_id                             PER_ALL_ASSIGNMENTS_F.COMMENT_ID%TYPE;    lb_no_managers_warning        BOOLEAN;  -- Out Variables for Update Employee Assgment Criteria  -- -------------------------------------------------------------------------------  ln_special_ceiling_step_id                    PER_ALL_ASSIGNMENTS_F.SPECIAL_CEILING_STEP_ID%TYPE;  lc_group_name                                          VARCHAR2(30);  ld_effective_start_date                             PER_ALL_ASSIGNMENTS_F.EFFECTIVE_START_DATE%TYPE;  ld_effective_end_date                              PER_ALL_ASSIGNMENTS_F.EFFECTIVE_END_DATE%TYPE;  lb_org_now_no_manager_warning   BOOLEAN;  lb_other_manager_warning                  BOOLEAN;  lb_spp_delete_warning                          BOOLEAN;  lc_entries_changed_warning                VARCHAR2(30);  lb_tax_district_changed_warn             BOOLEAN;   BEGIN    -- Find Date Track Mode    -- --------------------------------    dt_api.find_dt_upd_modes    (    p_effective_date                  => TO_DATE('12-JUN-2011'),         p_base_table_name            => 'PER_ALL_ASSIGNMENTS_F',         p_base_key_column           => 'ASSIGNMENT_ID',         p_base_key_value               => ln_assignment_id,          -- Output data elements          -- --------------------------------          p_correction                          => lb_correction,          p_update                                => lb_update,          p_update_override              => lb_update_override,          p_update_change_insert   => lb_update_change_insert      );      IF ( lb_update_override = TRUE OR lb_update_change_insert = TRUE )    THEN        -- UPDATE_OVERRIDE        -- ---------------------------------        lc_dt_ud_mode := 'UPDATE_OVERRIDE';    END IF;     IF ( lb_correction = TRUE )   THEN       -- CORRECTION       -- ----------------------      lc_dt_ud_mode := 'CORRECTION';   END IF;     IF ( lb_update = TRUE )   THEN       -- UPDATE       -- --------------       lc_dt_ud_mode := 'UPDATE';    END IF;     -- Update Employee Assignment   -- ---------------------------------------------  hr_assignment_api.update_emp_asg  ( -- Input data elements   -- ------------------------------   p_effective_date                              => TO_DATE('12-JUN-2011'),   p_datetrack_update_mode         => lc_dt_ud_mode,   p_assignment_id                            => ln_assignment_id,   p_supervisor_id                              => NULL,   p_change_reason                           => NULL,   p_manager_flag                              => 'N',   p_bargaining_unit_code              => NULL,   p_labour_union_member_flag   => NULL,   p_segment1                                       => 204,   p_segment3                                       => 'N',   p_normal_hours                              => 10,   p_frequency                                       => 'W',   -- Output data elements   -- -------------------------------   p_object_version_number             => ln_object_number,   p_soft_coding_keyflex_id              => ln_soft_coding_keyflex_id,   p_concatenated_segments             => lc_concatenated_segments,   p_comment_id                                   => ln_comment_id,   p_effective_start_date                      => ld_effective_start_date,   p_effective_end_date                        => ld_effective_end_date,   p_no_managers_warning               => lb_no_managers_warning,   p_other_manager_warning            => lb_other_manager_warning  );    -- Find Date Track Mode for Second API   -- ------------------------------------------------------   dt_api.find_dt_upd_modes   (  p_effective_date                   => TO_DATE('12-JUN-2011'),      p_base_table_name            => 'PER_ALL_ASSIGNMENTS_F',      p_base_key_column           => 'ASSIGNMENT_ID',      p_base_key_value               => ln_assignment_id,      -- Output data elements      -- -------------------------------      p_correction                           => lb_correction,      p_update                                 => lb_update,      p_update_override               => lb_update_override,      p_update_change_insert    => lb_update_change_insert   );     IF ( lb_update_override = TRUE OR lb_update_change_insert = TRUE )   THEN     -- UPDATE_OVERRIDE     -- --------------------------------     lc_dt_ud_mode := 'UPDATE_OVERRIDE';   END IF;      IF ( lb_correction = TRUE )    THEN      -- CORRECTION      -- ----------------------      lc_dt_ud_mode := 'CORRECTION';   END IF;      IF ( lb_update = TRUE )    THEN      -- UPDATE      -- --------------      lc_dt_ud_mode := 'UPDATE';    END IF;    -- Update Employee Assgment Criteria  -- -----------------------------------------------------  hr_assignment_api.update_emp_asg_criteria  ( -- Input data elements   -- ------------------------------   p_effective_date                                   => TO_DATE('12-JUN-2011'),   p_datetrack_update_mode               => lc_dt_ud_mode,   p_assignment_id                                 => ln_assignment_id,   p_location_id                                        => 204,   p_grade_id                                             => 29,   p_job_id                                                  => 16,   p_payroll_id                                          => 52,   p_organization_id                               => 239,   p_employment_category                    => 'FR',   -- Output data elements   -- -------------------------------   p_people_group_id                              => ln_people_group_id,   p_object_version_number                   => ln_object_number,   p_special_ceiling_step_id                  => ln_special_ceiling_step_id,   p_group_name                                        => lc_group_name,   p_effective_start_date                           => ld_effective_start_date,   p_effective_end_date                             => ld_effective_end_date,   p_org_now_no_manager_warning  => lb_org_now_no_manager_warning,   p_other_manager_warning                 => lb_other_manager_warning,   p_spp_delete_warning                         => lb_spp_delete_warning,   p_entries_changed_warning              => lc_entries_changed_warning,   p_tax_district_changed_warning     => lb_tax_district_changed_warn  );    COMMIT; EXCEPTION          WHEN OTHERS THEN                       ROLLBACK;                       dbms_output.put_line(SQLERRM); END; / SHOW ERR;    

  Read the article

• Finding nuggets in ARC discussions

  - by alanc

  A bit over twenty years ago, Sun formed an Architecture Review Committee (ARC) that evaluates proposals to change interfaces between components in Sun software products. During the OpenSolaris days, we opened many of these discussions to the community. While they’re back behind closed doors, and at a different company now, we still continue to hold these reviews for the software from what’s now the Sun Systems Group division of Oracle. Recently one of these reviews was held (via e-mail discussion) to review a proposal to update our GNU findutils package to the latest upstream release. One of the upstream changes discussed was the addition of an “oldfind” program. In findutils 4.3, find was modified to use the fts() function to walk the directory tree, and oldfind was created to provide the old mechanism in case there were bugs in the new implementation that users needed to workaround. In Solaris 11 though, we still ship the find descended from SVR4 as /usr/bin/find and the GNU find is available as either /usr/bin/gfind or /usr/gnu/bin/find. This raised the discussion of if we should add oldfind, and if so what should we call it. Normally our policy is to only add the g* names for GNU commands that conflict with an existing Solaris command – for instance, we ship /usr/bin/emacs, not /usr/bin/gemacs. In this case however, that seemed like it would be more confusing to have /usr/bin/oldfind be the older version of /usr/bin/gfind not of /usr/bin/find. Thus if we shipped it, it would make more sense to call it /usr/bin/goldfind, which several ARC members noted read more naturally as “gold find” than as “g old find”. One of the concerns we often discuss in ARC is if a change is likely to be understood by users or if it will result in more calls to support. As we hit this part of the discussion on a Friday at the end of a long week, I couldn’t resist putting forth a hypothetical support call for this command: “Hello, Oracle Solaris Support, how may I help you?” “My admin is out sick, but he sent an email that he put the findutils package on our server, and I can run goldfind now. I tried it, but goldfind didn’t find gold.” “Did he get the binutils package too?” “No he just said findutils, do we need binutils?” “Well, gold comes in the binutils package, so goldfind would be able to find gold if you got that package.” “How much does Oracle charge for that package?” “It’s free for Solaris users.” “You mean Oracle ships packages of gold to customers for free?” “Yes, if you get the binutils package, it includes GNU gold.” “New gold? Is that some sort of alchemy, turning stuff into gold?” “Not new gold, gold from the GNU project.” “Oracle’s taking gold from the GNU project and shipping it to me?” “Yes, if you get binutils, that package includes gold along with the other tools from the GNU project.” “And GNU doesn’t mind Oracle taking their gold and giving it to customers?” “No, GNU is a non-profit whose goal is to share their software.” “Sharing software sure, but gold? Where does a non-profit like GNU get gold anyway?” “Oh, Google donated it to them.” “Ah! So Oracle will give me the gold that GNU got from Google!” “Yes, if you get the package from us.” “How do I get the package with the gold?” “Just run pkg install binutils and it will put it on your disk.” “We’ve got multiple disks here - which one will it put it on?” “The one with the system image - do you know which one that is? “Well the note from the admin says the system is on the first disk and the users are on the second disk.” “Okay, so it should go on the first disk then.” “And where will I find the gold?” “It will be in the /usr/bin directory.” “In the user’s bin? So thats on the second disk?” “No, it would be on the system disk, with the other development tools, like make, as, and what.” “So what’s on the first disk?” “Well if the system image is there the commands should all be there.” “All the commands? Not just what?” “Right, all the commands that come with the OS, like the shell, ps, and who.” “So who’s on the first disk too?” “Yes. Did your admin say when he’d be back?” “No, just that he had a massive headache and was going home after I tried to get him to explain this stuff to me.” “I can’t imagine why.” “Oh, is why a command too?” “No, _why was a Ruby programmer.” “Ruby? Do you give those away with the gold too?” “Yes, but it comes in the ruby package, not binutils.” “Oh, I’ll have to have my admin get that package too! Thanks!” Needless to say, we decided this might not be the best idea. Since the GNU package hasn’t had to release a serious bug fix in the new find in the past few years, the new GNU find seems pretty stable, and we always have the SVR4 find to use as a fallback in Solaris, so it didn’t seem that adding oldfind was really necessary, so we passed on including it when we update to the new findutils release. [Apologies to Abbott, Costello, their fans, and everyone who read this far. The Gold (linker) page on Wikipedia may explain some of the above, but can’t explain why goldfind is the old GNU find, but gold is the new GNU ld.]

  Read the article

• Are you reporting Visual Studio 2012 issues to Microsoft correctly?

  - by Tarun Arora

  Issues you may run into while using Visual Studio need to be reported to the Microsoft Product Team via the Microsoft connect site. The Microsoft team then tries to reproduce the issue using the details provided by you. If the information you provide isn’t sufficient to reproduce the issue the team tries to contact you for specifics, this not only increases the cycle time to resolution but the lack of communication also results in issues not being resolved. So, when I report an issue one part of me tells me to include as much detail about the issue as I can clubbing screen shots, repo steps, system information, visual studio version information,… the other half tells me this is so time consuming, leave it for now and come back to fill all these details later. Reporting a bug but not including the supporting information is an invitation to excuses like …     Microsoft has absolutely changed this experience for VS 2012. The Microsoft Visual Studio Feedback tool is designed to simplify the process of providing feedback and reporting issues to Microsoft that you may encounter while using Microsoft Visual Studio 2012. Note – The Microsoft Visual Studio 2012 Feedback client currently only works for VS 2012 and not any other versions of Visual Studio. Setting up the Microsoft Visual Studio 2012 Feedback client Open Visual Studio, from the Tools menu select Extension and Updates. In the Extension and Updates window, click Online from the left pane and search using the text ‘feedback’, download and Install Microsoft Visual Studio 2012 Feedback Tool by following the instructions from the wizard. Note - Restarting Visual Studio after the install is a must! How to report a bug for Visual Studio 2012? Click on the Help menu and choose Report a Bug You should see an icon Microsoft Visual Studio 2012 Feedback Tool come up in the system tray icon area You’ll need to accept the Privacy statement. You have the option of reporting the feedback as private or public. Microsoft works with several Partners, MVP’s and Vendors who get access to early bits of Microsoft products for valuation. This is where it becomes essential to report the feedback privately. I would choose the Public option otherwise. After all if it’s out there in the public, others can discover and add to it easily. You now have the option to report a new issue or add to an existing issue. Should you choose to add to an existing issue you should have the feedback ID of the issue available. This can be obtained from the Microsoft Connect site. For now I am going to focus on reporting a new feedback privately. Filling out the feedback details You will notice that VsInfo.xml and DxDiagOutput.txt are automatically attached as you enter this screen (more on that later).  Feedback Type Choose the feedback type from (Performance, Hang, Crash, Other) Note – The record button will only be enabled once you have enabled once you have chosen the feedback type, Bug-repro recording is not available for Windows Server 2008.     Effective Title and Description Enter a title that helps us differentiate the bug when it appears in a list, so that we can group it with any related bugs, assign it to a developer more effectively, and resolve it more quickly. Example: Imagine that you are submitting a bug because you tried to install Service Pack 1 and got a message that Visual Studio is not installed even though it is. Helpful:  Installed Visual Studio version not detected during Service Pack 1 setup. Not helpful:  Service Pack 1 problem. Tip: Write the problem description first, and then distil it to create a title. Example Description: Helpful: When I run Service Pack 1 Setup, I get the message "No Visual Studio version is detected" even though I have Visual Studio 2010 Ultimate and Visual C++ 2010 Express installed on my machine. Even though I uninstalled both editions, and then first reinstalled Ultimate and then Express, I still get the message. Record: Becoming a first class citizen Often a repro report is invaluable to describe and decipher the issue. Please use this feature to send actionable feedback. The record repro feature works differently depending on the feedback type you selected. Please find below details for each recording option. You can start recording simply by selecting a feedback type, and clicking on the “Record” button. When "Performance" is the bug type: When the Microsoft Visual Studio trace recorder starts, perform the actions that show the performance problem you want to report and then click on the "Stop Recording" button as soon as you experience the performance problem. Because the tool optimizes trace collection, you can run it for as long as it takes to show the problem, up to two hours. Note that, you need to stop recording as soon as the performance issue occurs, because the tool captures only the last couple minutes of your actions to optimize the trace collection. After you stop the recording, the tool takes up to two minutes to assemble the data and attach an ETLTrace.zip file to your bug report. The data includes information about Windows events and the Visual Studio code path. Note that, running the Microsoft Visual Studio trace recorder requires elevated user privilege. When "Crash" is the bug type: When the dialog box appears, select the running Visual Studio instance for which you want to show the steps that cause a crash. When the crash occurs, click on the "Stop Record" button. After you do this, two files are attached to your bug report - an AutomaticCrashDump.zip file that contains information about the crash and a ReproSteps.zip file that shows the repro steps. Repro steps are captured by Windows Problem Steps Recorder. Note that, you can pause the recording, and resume later, or for a specific step, you can add additional comments. When "Hang" is the bug type: The process for recording the steps that cause a hang resembles the one for crashes. The difference is, you can even collect a dump file after the VS hangs; start the VSFT either from the system tray or by starting a new instance of VS, select "Hang" as feedback type and click on the "Record" button. You will be prompted which VS to collect dump about, select the VS instance that hanged. VSFT collects a dump file regarding the hang, called MiniDump.zip, and attaches to your bug report. When "Other" is the bug type: When the problem step recorder starts, perform the actions that show the issue you want to report and then choose the "Stop” button. You can pause the recording, and resume later, or for a specific step, you can add additional comments. Once you’re done, ReproSteps.zip is added to your bug report. Pre-attached files It is essential for Microsoft to know what version of the the product are you currently using and what is the current configuration of your system. Note – The total size of all attachments in a bug report cannot exceed 2 GB, and every uncompressed attachment must be smaller than 512 MB. We recommend that you assemble all of your attachments, compress them together into a .zip file, and then attach the .zip file. Taking a screenshot Associate a screen shot by clicking the Take screenshot button, choose either the entire desktop, the specific monitor (useful if you are working in a multi monitor configuration) or the specific window in question. And finally … click Submit If you need further help, more details can be found here. You can view your feedback online by using the following URL “">https://connect.microsoft.com/VisualStudio/SearchResults.aspx?SearchQuery=<feedbackId>” Happy bug logging

  Read the article

• JPA 2.1 Schema Generation (TOTD #187)

  - by arungupta

  This blog explained some of the key features of JPA 2.1 earlier. Since then Schema Generation has been added to JPA 2.1. This Tip Of The Day (TOTD) will provide more details about this new feature in JPA 2.1. Schema Generation refers to generation of database artifacts like tables, indexes, and constraints in a database schema. It may or may not involve generation of a proper database schema depending upon the credentials and authorization of the user. This helps in prototyping of your application where the required artifacts are generated either prior to application deployment or as part of EntityManagerFactory creation. This is also useful in environments that require provisioning database on demand, e.g. in a cloud. This feature will allow your JPA domain object model to be directly generated in a database. The generated schema may need to be tuned for actual production environment. This usecase is supported by allowing the schema generation to occur into DDL scripts which can then be further tuned by a DBA. The following set of properties in persistence.xml or specified during EntityManagerFactory creation controls the behaviour of schema generation. Property Name Purpose Values javax.persistence.schema-generation-action Controls action to be taken by persistence provider "none", "create", "drop-and-create", "drop" javax.persistence.schema-generation-target Controls whehter schema to be created in database, whether DDL scripts are to be created, or both "database", "scripts", "database-and-scripts" javax.persistence.ddl-create-script-target, javax.persistence.ddl-drop-script-target Controls target locations for writing of scripts. Writers are pre-configured for the persistence provider. Need to be specified only if scripts are to be generated. java.io.Writer (e.g. MyWriter.class) or URL strings javax.persistence.ddl-create-script-source, javax.persistence.ddl-drop-script-source Specifies locations from which DDL scripts are to be read. Readers are pre-configured for the persistence provider. java.io.Reader (e.g. MyReader.class) or URL strings javax.persistence.sql-load-script-source Specifies location of SQL bulk load script. java.io.Reader (e.g. MyReader.class) or URL string javax.persistence.schema-generation-connection JDBC connection to be used for schema generation javax.persistence.database-product-name, javax.persistence.database-major-version, javax.persistence.database-minor-version Needed if scripts are to be generated and no connection to target database. Values are those obtained from JDBC DatabaseMetaData. javax.persistence.create-database-schemas Whether Persistence Provider need to create schema in addition to creating database objects such as tables, sequences, constraints, etc. "true", "false" Section 11.2 in the JPA 2.1 specification defines the annotations used for schema generation process. For example, @Table, @Column, @CollectionTable, @JoinTable, @JoinColumn, are used to define the generated schema. Several layers of defaulting may be involved. For example, the table name is defaulted from entity name and entity name (which can be specified explicitly as well) is defaulted from the class name. However annotations may be used to override or customize the values. The following entity class: @Entity public class Employee {    @Id private int id;    private String name;     . . .     @ManyToOne     private Department dept; } is generated in the database with the following attributes: Maps to EMPLOYEE table in default schema "id" field is mapped to ID column as primary key "name" is mapped to NAME column with a default VARCHAR(255). The length of this field can be easily tuned using @Column. @ManyToOne is mapped to DEPT_ID foreign key column. Can be customized using JOIN_COLUMN. In addition to these properties, couple of new annotations are added to JPA 2.1: @Index - An index for the primary key is generated by default in a database. This new annotation will allow to define additional indexes, over a single or multiple columns, for a better performance. This is specified as part of @Table, @SecondaryTable, @CollectionTable, @JoinTable, and @TableGenerator. For example: @Table(indexes = {@Index(columnList="NAME"), @Index(columnList="DEPT_ID DESC")})@Entity public class Employee {    . . .} The generated table will have a default index on the primary key. In addition, two new indexes are defined on the NAME column (default ascending) and the foreign key that maps to the department in descending order. @ForeignKey - It is used to define foreign key constraint or to otherwise override or disable the persistence provider's default foreign key definition. Can be specified as part of JoinColumn(s), MapKeyJoinColumn(s), PrimaryKeyJoinColumn(s). For example: @Entity public class Employee {    @Id private int id;    private String name;    @ManyToOne    @JoinColumn(foreignKey=@ForeignKey(foreignKeyDefinition="FOREIGN KEY (MANAGER_ID) REFERENCES MANAGER"))    private Manager manager;     . . . } In this entity, the employee's manager is mapped by MANAGER_ID column in the MANAGER table. The value of foreignKeyDefinition would be a database specific string. A complete replay of Linda's talk at JavaOne 2012 can be seen here (click on CON4212_mp4_4212_001 in Media). These features will be available in GlassFish 4 promoted builds in the near future. JPA 2.1 will be delivered as part of Java EE 7. The different components in the Java EE 7 platform are tracked here. JPA 2.1 Expert Group has released Early Draft 2 of the specification. Section 9.4 and 11.2 provide all details about Schema Generation. The latest javadocs can be obtained from here. And the JPA EG would appreciate feedback.

  Read the article

• Apache 2 Virtual Hosts no working on OSX 10.6

  - by matt_lethargic

  This is my first MacBook and I'm trying to get virtual hosts up and running so as it's going to be my dev machine. I've got apache/php/mysql running fine, the problem is that what ever address I go to I just get one of the virtual hosts I've setup. I can't even get to the root site anymore. I had phpmyadmin setup on http://localhost/pma but now that comes up with an error. If I take out the vhosts config file it seems to work again. I've put all my configs I can think you'll need below. ############## httpd config ############# ServerRoot "/usr" Listen 80 LoadModule authn_file_module libexec/apache2/mod_authn_file.so LoadModule authn_dbm_module libexec/apache2/mod_authn_dbm.so LoadModule authn_anon_module libexec/apache2/mod_authn_anon.so LoadModule authn_dbd_module libexec/apache2/mod_authn_dbd.so LoadModule authn_default_module libexec/apache2/mod_authn_default.so LoadModule authz_host_module libexec/apache2/mod_authz_host.so LoadModule authz_groupfile_module libexec/apache2/mod_authz_groupfile.so LoadModule authz_user_module libexec/apache2/mod_authz_user.so LoadModule authz_dbm_module libexec/apache2/mod_authz_dbm.so LoadModule authz_owner_module libexec/apache2/mod_authz_owner.so LoadModule authz_default_module libexec/apache2/mod_authz_default.so LoadModule auth_basic_module libexec/apache2/mod_auth_basic.so LoadModule auth_digest_module libexec/apache2/mod_auth_digest.so LoadModule cache_module libexec/apache2/mod_cache.so LoadModule disk_cache_module libexec/apache2/mod_disk_cache.so LoadModule mem_cache_module libexec/apache2/mod_mem_cache.so LoadModule dbd_module libexec/apache2/mod_dbd.so LoadModule dumpio_module libexec/apache2/mod_dumpio.so LoadModule reqtimeout_module libexec/apache2/mod_reqtimeout.so LoadModule ext_filter_module libexec/apache2/mod_ext_filter.so LoadModule include_module libexec/apache2/mod_include.so LoadModule filter_module libexec/apache2/mod_filter.so LoadModule substitute_module libexec/apache2/mod_substitute.so LoadModule deflate_module libexec/apache2/mod_deflate.so LoadModule log_config_module libexec/apache2/mod_log_config.so LoadModule log_forensic_module libexec/apache2/mod_log_forensic.so LoadModule logio_module libexec/apache2/mod_logio.so LoadModule env_module libexec/apache2/mod_env.so LoadModule mime_magic_module libexec/apache2/mod_mime_magic.so LoadModule cern_meta_module libexec/apache2/mod_cern_meta.so LoadModule expires_module libexec/apache2/mod_expires.so LoadModule headers_module libexec/apache2/mod_headers.so LoadModule ident_module libexec/apache2/mod_ident.so LoadModule usertrack_module libexec/apache2/mod_usertrack.so LoadModule setenvif_module libexec/apache2/mod_setenvif.so LoadModule version_module libexec/apache2/mod_version.so LoadModule proxy_module libexec/apache2/mod_proxy.so LoadModule proxy_connect_module libexec/apache2/mod_proxy_connect.so LoadModule proxy_ftp_module libexec/apache2/mod_proxy_ftp.so LoadModule proxy_http_module libexec/apache2/mod_proxy_http.so LoadModule proxy_scgi_module libexec/apache2/mod_proxy_scgi.so LoadModule proxy_ajp_module libexec/apache2/mod_proxy_ajp.so LoadModule proxy_balancer_module libexec/apache2/mod_proxy_balancer.so LoadModule ssl_module libexec/apache2/mod_ssl.so LoadModule mime_module libexec/apache2/mod_mime.so LoadModule dav_module libexec/apache2/mod_dav.so LoadModule status_module libexec/apache2/mod_status.so LoadModule autoindex_module libexec/apache2/mod_autoindex.so LoadModule asis_module libexec/apache2/mod_asis.so LoadModule info_module libexec/apache2/mod_info.so LoadModule cgi_module libexec/apache2/mod_cgi.so LoadModule dav_fs_module libexec/apache2/mod_dav_fs.so LoadModule vhost_alias_module libexec/apache2/mod_vhost_alias.so LoadModule negotiation_module libexec/apache2/mod_negotiation.so LoadModule dir_module libexec/apache2/mod_dir.so LoadModule imagemap_module libexec/apache2/mod_imagemap.so LoadModule actions_module libexec/apache2/mod_actions.so LoadModule speling_module libexec/apache2/mod_speling.so LoadModule userdir_module libexec/apache2/mod_userdir.so LoadModule alias_module libexec/apache2/mod_alias.so LoadModule rewrite_module libexec/apache2/mod_rewrite.so LoadModule bonjour_module libexec/apache2/mod_bonjour.so LoadModule php5_module libexec/apache2/libphp5.so <IfModule !mpm_netware_module> <IfModule !mpm_winnt_module> User _www Group _www </IfModule> </IfModule> ServerAdmin [email protected] ServerName localhost:80 DocumentRoot "/Library/WebServer/Documents" <Directory /> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> <Directory "/Library/WebServer/Documents"> Options Indexes FollowSymLinks MultiViews AllowOverride All Order allow,deny Allow from all </Directory> <IfModule dir_module> DirectoryIndex index.html </IfModule> <FilesMatch "^\.([Hh][Tt]|[Dd][Ss]_[Ss])"> Order allow,deny Deny from all Satisfy All </FilesMatch> <Files "rsrc"> Order allow,deny Deny from all Satisfy All </Files> <DirectoryMatch ".*\.\.namedfork"> Order allow,deny Deny from all Satisfy All </DirectoryMatch> ErrorLog "/private/var/log/apache2/error_log" LogLevel warn <IfModule log_config_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %>s %b" common <IfModule logio_module> LogFormat "%h %l %u %t \"%r\" %>s %b \"%{Referer}i\" \"%{User-Agent}i\" %I %O" combinedio </IfModule> CustomLog "/private/var/log/apache2/access_log" common </IfModule> <IfModule alias_module> ScriptAliasMatch ^/cgi-bin/((?!(?i:webobjects)).*$) "/Library/WebServer/CGI-Executables/$1" </IfModule> <Directory "/Library/WebServer/CGI-Executables"> AllowOverride None Options None Order allow,deny Allow from all </Directory> DefaultType text/plain <IfModule mime_module> TypesConfig /private/etc/apache2/mime.types AddType application/x-compress .Z AddType application/x-gzip .gz .tgz </IfModule> TraceEnable off Include /private/etc/apache2/extra/httpd-mpm.conf Include /private/etc/apache2/extra/httpd-autoindex.conf Include /private/etc/apache2/extra/httpd-languages.conf Include /private/etc/apache2/extra/httpd-userdir.conf Include /private/etc/apache2/extra/httpd-vhosts.conf Include /private/etc/apache2/extra/httpd-manual.conf <IfModule ssl_module> SSLRandomSeed startup builtin SSLRandomSeed connect builtin </IfModule> Include /private/etc/apache2/other/*.conf ############# httpd-vhosts ################ NameVirtualHost *:80 <VirtualHost *:80> ServerAdmin [email protected] DocumentRoot "/Users/matt/Workspace/farmers-arms/website/farmers_arms" ServerName dev.farmers ServerAlias www.dev.farmers ErrorLog "/private/var/log/apache2/localhost.farmers-error_log" CustomLog "/private/var/log/apache2/localhost.farmers-access_log" common <Directory "/Users/matt/Workspace/farmers-arms/website/farmers_arms"> Options FollowSymLinks AllowOverride All Order allow,deny Allow from all </Directory> </VirtualHost> Hosts file 127.0.0.1 localhost 255.255.255.255 broadcasthost ::1 localhost fe80::1%lo0 localhost 127.0.0.1 dev.farmers 127.0.0.1 dev.hft Help!!!

  Read the article

• start apache2 in chroot environment

  - by xero

  This is my first time I am trying to install Apache2 HTTP server in a chroot environment. That's why i decided to follow this procedure : http://www.symantec.com/connect/articles/securing-apache-2-step-step my web server start with successful : root@ubuntu:/usr/local/apache2/bin/apachectl start [Tue Oct 29 01:49:15.879868 2013] [core:warn] [pid 10835] AH00117: Ignoring deprecated use of DefaultType in line 60 of /usr/local/apache2/conf/httpd.conf. AH00548: NameVirtualHost has no effect and will be removed in the next release /usr/local/apache2/conf/httpd.conf:81 AH00558: httpd: Could not reliably determine the server's fully qualified domain name, using 127.0.1.1. Set the 'ServerName' directive globally to suppress this message root@ubuntu:/chroot/httpd/etc# netstat -antu Active Internet connections (servers and established) Proto Recv-Q Send-Q Local Address Foreign Address State tcp 0 0 0.0.0.0:80 0.0.0.0:* LISTEN But at the end of part "Chrooting the server" i have always the same problem. When i try to start apache2 in chroot i have always this error : root@ubuntu:/chroot/httpd/etc# chroot /chroot/httpd /usr/local/apache2/bin/apachectl chroot: failed to run command `/usr/local/apache2/bin/apachectl': No such file or directory however my apachectl file exist : root@ubuntu:/chroot/httpd/etc# ls -l /chroot/httpd/usr/local/apache2/bin/apachectl -rwxr-xr-x 1 root root 3437 Oct 29 02:28 /chroot/httpd/usr/local/apache2/bin/apachectl when I use strace to debug, there are errors with coreutils.mo and libc.mo : root@ubuntu:/chroot/httpd/etc# chroot /chroot/httpd /usr/local/apache2/bin/httpd group hosts nsswitch.conf passwd passwords resolv.conf root@ubuntu:/chroot/httpd/etc# strace chroot /chroot/httpd /usr/local/apache2/bin/apachectl execve("/usr/sbin/chroot", ["chroot", "/chroot/httpd", "/usr/local/apache2/bin/apachectl"], [/* 18 vars */]) = 0 brk(0) = 0x1e46000 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) mmap(NULL, 8192, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe89563b000 access("/etc/ld.so.preload", R_OK) = -1 ENOENT (No such file or directory) open("/etc/ld.so.cache", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=18263, ...}) = 0 mmap(NULL, 18263, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe895636000 close(3) = 0 access("/etc/ld.so.nohwcap", F_OK) = -1 ENOENT (No such file or directory) open("/lib/x86_64-linux-gnu/libc.so.6", O_RDONLY|O_CLOEXEC) = 3 read(3, "\177ELF\2\1\1\0\0\0\0\0\0\0\0\0\3\0>\0\1\0\0\0\200\30\2\0\0\0\0\0"..., 832) = 832 fstat(3, {st_mode=S_IFREG|0755, st_size=1815224, ...}) = 0 mmap(NULL, 3929304, PROT_READ|PROT_EXEC, MAP_PRIVATE|MAP_DENYWRITE, 3, 0) = 0x7fe89505b000 mprotect(0x7fe895210000, 2097152, PROT_NONE) = 0 mmap(0x7fe895410000, 24576, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_DENYWRITE, 3, 0x1b5000) = 0x7fe895410000 mmap(0x7fe895416000, 17624, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_FIXED|MAP_ANONYMOUS, -1, 0) = 0x7fe895416000 close(3) = 0 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895635000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895634000 mmap(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0x7fe895633000 arch_prctl(ARCH_SET_FS, 0x7fe895634700) = 0 mprotect(0x7fe895410000, 16384, PROT_READ) = 0 mprotect(0x606000, 4096, PROT_READ) = 0 mprotect(0x7fe89563d000, 4096, PROT_READ) = 0 munmap(0x7fe895636000, 18263) = 0 brk(0) = 0x1e46000 brk(0x1e67000) = 0x1e67000 open("/usr/lib/locale/locale-archive", O_RDONLY|O_CLOEXEC) = 3 fstat(3, {st_mode=S_IFREG|0644, st_size=2919792, ...}) = 0 mmap(NULL, 2919792, PROT_READ, MAP_PRIVATE, 3, 0) = 0x7fe894d92000 close(3) = 0 chroot("/chroot/httpd") = 0 chdir("/") = 0 execve("/usr/local/apache2/bin/apachectl", ["/usr/local/apache2/bin/apachectl"], [/* 18 vars */]) = -1 ENOENT (No such file or directory) open("/usr/share/locale/locale.alias", O_RDONLY|O_CLOEXEC) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.UTF-8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.utf8/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en/LC_MESSAGES/coreutils.mo", O_RDONLY) = -1 ENOENT (No such file or directory) write(2, "chroot: ", 8chroot: ) = 8 write(2, "failed to run command `/usr/loca"..., 56failed to run command `/usr/local/apache2/bin/apachectl') = 56 open("/usr/share/locale/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en_US/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.UTF-8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en.utf8/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) open("/usr/share/locale-langpack/en/LC_MESSAGES/libc.mo", O_RDONLY) = -1 ENOENT (No such file or directory) write(2, ": No such file or directory", 27: No such file or directory) = 27 write(2, "\n", 1 ) = 1 close(1) = 0 close(2) = 0 exit_group(127) = ? using the tutorial I did not find and copie libraries following on my server. I suppose there is no link with coreutils.mo and libc.mo : /usr/libexec/ld-elf.so.1 /var/run/ld-elf.so.hints I don't understand what files i forgot to copy in my chroot environment to be able to start my apache2. Any ideas ?

  Read the article

• HAProxy: Display a "BADREQ" | BADREQ's by the thousands

  - by GruffTech

  My HAProxy Configuration. #HA-Proxy version 1.3.22 2009/10/14 Copyright 2000-2009 Willy Tarreau <[email protected]> global maxconn 10000 spread-checks 50 user haproxy group haproxy daemon stats socket /tmp/haproxy log localhost local0 log localhost local1 notice defaults mode http maxconn 50000 timeout client 10000 option forwardfor except 127.0.0.1 option httpclose option httplog listen dcaustin 0.0.0.0:80 mode http timeout connect 12000 timeout server 60000 timeout queue 120000 balance roundrobin option httpchk GET /index.html log global option httplog option dontlog-normal server web1 10.10.10.101:80 maxconn 300 check fall 1 server web2 10.10.10.102:80 maxconn 300 check fall 1 server web3 10.10.10.103:80 maxconn 300 check fall 1 server web4 10.10.10.104:80 maxconn 300 check fall 1 listen stats 0.0.0.0:9000 mode http balance log global timeout client 5000 timeout connect 4000 timeout server 30000 stats uri /haproxy HAProxy is running, and the socket is working... adam@dcaustin:/etc/haproxy# echo "show info" | socat stdio /tmp/haproxy Name: HAProxy Version: 1.3.22 Release_date: 2009/10/14 Nbproc: 1 Process_num: 1 Pid: 6320 Uptime: 0d 0h14m58s Uptime_sec: 898 Memmax_MB: 0 Ulimit-n: 20017 Maxsock: 20017 Maxconn: 10000 Maxpipes: 0 CurrConns: 47 PipesUsed: 0 PipesFree: 0 Tasks: 51 Run_queue: 1 node: dcaustin desiption: Errors show nothing from socket... adam@dcaustin:/etc/haproxy# echo "show errors" | socat stdio /tmp/haproxy adam@dcaustin:/etc/haproxy# However... My Error log is exploding with "badrequests" with the Error code cR. cR (according to 1.3 documentation) is The "timeout http-request" stroke before the client sent a full HTTP request. This is sometimes caused by too large TCP MSS values on the client side for PPPoE networks which cannot transport full-sized packets, or by clients sending requests by hand and not typing fast enough, or forgetting to enter the empty line at the end of the request. The HTTP status code is likely a 408 here. Correct on the 408, but we're getting literally thousands of these requests every hour. (This log snippet is an clip for about 10 seconds of time...) Jun 30 11:08:52 localhost haproxy[6320]: 92.22.213.32:26448 [30/Jun/2011:11:08:42.384] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10002 408 212 - - cR-- 35/35/18/0/0 0/0 "<BADREQ>" Jun 30 11:08:54 localhost haproxy[6320]: 71.62.130.24:62818 [30/Jun/2011:11:08:44.457] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10001 408 212 - - cR-- 39/39/16/0/0 0/0 "<BADREQ>" Jun 30 11:08:55 localhost haproxy[6320]: 84.73.75.236:3589 [30/Jun/2011:11:08:45.021] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10008 408 212 - - cR-- 35/35/15/0/0 0/0 "<BADREQ>" Jun 30 11:08:55 localhost haproxy[6320]: 69.39.20.190:49969 [30/Jun/2011:11:08:45.709] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 37/37/16/0/0 0/0 "<BADREQ>" Jun 30 11:08:56 localhost haproxy[6320]: 2.29.0.9:58772 [30/Jun/2011:11:08:46.846] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10001 408 212 - - cR-- 43/43/22/0/0 0/0 "<BADREQ>" Jun 30 11:08:57 localhost haproxy[6320]: 212.139.250.242:57537 [30/Jun/2011:11:08:47.568] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 42/42/21/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55046 [30/Jun/2011:11:08:48.559] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 46/46/24/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55044 [30/Jun/2011:11:08:48.554] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10004 408 212 - - cR-- 45/45/24/0/0 0/0 "<BADREQ>" Jun 30 11:08:58 localhost haproxy[6320]: 74.79.195.75:55045 [30/Jun/2011:11:08:48.554] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10005 408 212 - - cR-- 44/44/24/0/0 0/0 "<BADREQ>" Jun 30 11:09:00 localhost haproxy[6320]: 68.197.56.2:52781 [30/Jun/2011:11:08:50.975] dcaustin dcaustin/<NOSRV> -1/-1/-1/-1/10000 408 212 - - cR-- 49/49/28/0/0 0/0 "<BADREQ>" From what I read on google, if i wanted to see what the bad requests are, I can show errors to the socket and it will spit them out. We do run a pretty heavily trafficed website and the percentage of "BADREQS" to normal requests is quite low, but I'd like to be able to get ahold of what that request WAS so I can debug it. stats # pxname,svname,qcur,qmax,scur,smax,slim,stot,bin,bout,dreq,dresp,ereq,econ,eresp,wretr,wredis,status,weight,act,bck,chkfail,chkdown,lastchg,downtime,qlimit,pid,iid,sid,throttle,lbtot,tracked,type,rate,rate_lim,rate_max, dcaustin,FRONTEND,,,64,120,50000,88433,105889100,2553809875,0,0,4641,,,,,OPEN,,,,,,,,,1,1,0,,,,0,45,0,128, dcaustin,web1,0,0,10,28,300,20941,25402112,633143416,,0,,0,3,0,0,UP,1,1,0,0,0,2208,0,,1,1,1,,20941,,2,11,,30, dcaustin,web2,0,0,9,30,300,20941,25026691,641475169,,0,,0,3,0,0,UP,1,1,0,0,0,2208,0,,1,1,2,,20941,,2,11,,30, dcaustin,web3,0,0,10,27,300,20940,30116527,635015040,,0,,0,9,0,0,UP,1,1,0,0,0,2208,0,,1,1,3,,20940,,2,10,,31, dcaustin,web4,0,0,5,28,300,20940,25343770,643209546,,0,,0,8,0,0,UP,1,1,0,0,0,2208,0,,1,1,4,,20940,,2,11,,31, dcaustin,BACKEND,0,0,34,95,50000,83762,105889100,2553809875,0,0,,0,34,0,0,UP,4,4,0,,0,2208,0,,1,1,0,,83762,,1,43,,122, 88500 "Sessions" and 4500 errors. in the last 20 minutes.

  Read the article

• localhost/phpmyadmin pulls blank page

  - by Atul Modi

  When I tried configuring local machine as a Internet Gateway with website development capabilities over it and I installed all required software into it. I also had disable the selinux into it. But PROBLEM is when I do http://localhost/phpMyAdmin or all lower case than the page shows it as a blank page. I am pasting code from httpd.conf file into this as well as from phpMyAdmin.conf file I am using Fedora 16 for this. httpd.conf ServerTokens OS ServerRoot "/etc/httpd" PidFile run/httpd.pid Timeout 60 KeepAlive Off MaxKeepAliveRequests 100 KeepAliveTimeout 5 StartServers 8 MinSpareServers 5 MaxSpareServers 20 ServerLimit 256 MaxClients 256 MaxRequestsPerChild 4000 StartServers 4 MaxClients 300 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 0 Listen 80 LoadModule auth_basic_module modules/mod_auth_basic.so LoadModule auth_digest_module modules/mod_auth_digest.so LoadModule authn_file_module modules/mod_authn_file.so LoadModule authn_alias_module modules/mod_authn_alias.so LoadModule authn_anon_module modules/mod_authn_anon.so LoadModule authn_dbm_module modules/mod_authn_dbm.so LoadModule authn_default_module modules/mod_authn_default.so LoadModule authz_host_module modules/mod_authz_host.so LoadModule authz_user_module modules/mod_authz_user.so LoadModule authz_owner_module modules/mod_authz_owner.so LoadModule authz_groupfile_module modules/mod_authz_groupfile.so LoadModule authz_dbm_module modules/mod_authz_dbm.so LoadModule authz_default_module modules/mod_authz_default.so LoadModule authn_dbd_module modules/mod_authn_dbd.so LoadModule dbd_module modules/mod_dbd.so LoadModule ldap_module modules/mod_ldap.so LoadModule authnz_ldap_module modules/mod_authnz_ldap.so LoadModule include_module modules/mod_include.so LoadModule log_config_module modules/mod_log_config.so LoadModule logio_module modules/mod_logio.so LoadModule env_module modules/mod_env.so LoadModule ext_filter_module modules/mod_ext_filter.so LoadModule mime_magic_module modules/mod_mime_magic.so LoadModule expires_module modules/mod_expires.so LoadModule deflate_module modules/mod_deflate.so LoadModule headers_module modules/mod_headers.so LoadModule usertrack_module modules/mod_usertrack.so LoadModule setenvif_module modules/mod_setenvif.so LoadModule mime_module modules/mod_mime.so LoadModule dav_module modules/mod_dav.so LoadModule status_module modules/mod_status.so LoadModule autoindex_module modules/mod_autoindex.so LoadModule info_module modules/mod_info.so LoadModule dav_fs_module modules/mod_dav_fs.so LoadModule vhost_alias_module modules/mod_vhost_alias.so LoadModule negotiation_module modules/mod_negotiation.so LoadModule dir_module modules/mod_dir.so LoadModule actions_module modules/mod_actions.so LoadModule speling_module modules/mod_speling.so LoadModule userdir_module modules/mod_userdir.so LoadModule alias_module modules/mod_alias.so LoadModule substitute_module modules/mod_substitute.so LoadModule rewrite_module modules/mod_rewrite.so LoadModule proxy_module modules/mod_proxy.so LoadModule proxy_balancer_module modules/mod_proxy_balancer.so LoadModule proxy_ftp_module modules/mod_proxy_ftp.so LoadModule proxy_http_module modules/mod_proxy_http.so LoadModule proxy_ajp_module modules/mod_proxy_ajp.so LoadModule proxy_connect_module modules/mod_proxy_connect.so LoadModule cache_module modules/mod_cache.so LoadModule suexec_module modules/mod_suexec.so LoadModule disk_cache_module modules/mod_disk_cache.so LoadModule cgi_module modules/mod_cgi.so LoadModule version_module modules/mod_version.so Include conf.d/*.conf User apache Group apache ServerAdmin root@localhost UseCanonicalName Off DocumentRoot "/var/www/html" Options FollowSymLinks AllowOverride None Options Indexes FollowSymLinks AllowOverride None Order allow,deny Allow from all UserDir disabled DirectoryIndex index.html index.htm index.php AccessFileName .htaccess Order allow,deny Deny from all Satisfy All TypesConfig /etc/mime.types DefaultType text/plain MIMEMagicFile conf/magic HostnameLookups Off ErrorLog logs/error_log LogLevel warn LogFormat "%h %l %u %t \"%r\" %s %b \"%{Referer}i\" \"%{User-Agent}i\"" combined LogFormat "%h %l %u %t \"%r\" %s %b" common LogFormat "%{Referer}i - %U" referer LogFormat "%{User-agent}i" agent CustomLog logs/access_log combined ServerSignature On Alias /icons/ "/var/www/icons/" Options Indexes MultiViews FollowSymLinks AllowOverride None Order allow,deny Allow from all # Location of the WebDAV lock database. DAVLockDB /var/lib/dav/lockdb ScriptAlias /cgi-bin/ "/var/www/cgi-bin/" AllowOverride None Options None Order allow,deny Allow from all IndexOptions FancyIndexing VersionSort NameWidth=* HTMLTable Charset=UTF-8 AddIconByEncoding (CMP,/icons/compressed.gif) x-compress x-gzip AddIconByType (TXT,/icons/text.gif) text/* AddIconByType (IMG,/icons/image2.gif) image/* AddIconByType (SND,/icons/sound2.gif) audio/* AddIconByType (VID,/icons/movie.gif) video/* AddIcon /icons/binary.gif .bin .exe AddIcon /icons/binhex.gif .hqx AddIcon /icons/tar.gif .tar AddIcon /icons/world2.gif .wrl .wrl.gz .vrml .vrm .iv AddIcon /icons/compressed.gif .Z .z .tgz .gz .zip AddIcon /icons/a.gif .ps .ai .eps AddIcon /icons/layout.gif .html .shtml .htm .pdf AddIcon /icons/text.gif .txt AddIcon /icons/c.gif .c AddIcon /icons/p.gif .pl .py AddIcon /icons/f.gif .for AddIcon /icons/dvi.gif .dvi AddIcon /icons/uuencoded.gif .uu AddIcon /icons/script.gif .conf .sh .shar .csh .ksh .tcl AddIcon /icons/tex.gif .tex AddIcon /icons/bomb.gif core AddIcon /icons/back.gif .. AddIcon /icons/hand.right.gif README AddIcon /icons/folder.gif ^^DIRECTORY^^ AddIcon /icons/blank.gif ^^BLANKICON^^ DefaultIcon /icons/unknown.gif ReadmeName README.html HeaderName HEADER.html IndexIgnore .??* *~ # HEADER README* RCS CVS *,v *,t AddLanguage ca .ca AddLanguage cs .cz .cs AddLanguage da .dk AddLanguage de .de AddLanguage el .el AddLanguage en .en AddLanguage eo .eo AddLanguage es .es AddLanguage et .et AddLanguage fr .fr AddLanguage he .he AddLanguage hr .hr AddLanguage it .it AddLanguage ja .ja AddLanguage ko .ko AddLanguage ltz .ltz AddLanguage nl .nl AddLanguage nn .nn AddLanguage no .no AddLanguage pl .po AddLanguage pt .pt AddLanguage pt-BR .pt-br AddLanguage ru .ru AddLanguage sv .sv AddLanguage zh-CN .zh-cn AddLanguage zh-TW .zh-tw LanguagePriority en ca cs da de el eo es et fr he hr it ja ko ltz nl nn no pl pt pt-BR ru sv zh-CN zh-TW ForceLanguagePriority Prefer Fallback AddDefaultCharset UTF-8 AddType application/x-tar .tgz AddType application/x-httpd-php .php AddType application/x-httpd-php .xml AddHandler application/x-httpd-php .xml AddType application/x-compress .Z AddType application/x-gzip .gz .tgz AddType application/x-x509-ca-cert .crt AddType application/x-pkcs7-crl .crl AddHandler type-map var AddType text/html .shtml AddOutputFilter INCLUDES .shtml Alias /error/ "/var/www/error/" AllowOverride None Options IncludesNoExec AddOutputFilter Includes html AddHandler type-map var Order allow,deny Allow from all LanguagePriority en ForceLanguagePriority Prefer Fallback ErrorDocument 400 /error/HTTP_BAD_REQUEST.html.var ErrorDocument 401 /error/HTTP_UNAUTHORIZED.html.var ErrorDocument 403 /error/HTTP_FORBIDDEN.html.var ErrorDocument 404 /error/HTTP_NOT_FOUND.html.var ErrorDocument 405 /error/HTTP_METHOD_NOT_ALLOWED.html.var ErrorDocument 408 /error/HTTP_REQUEST_TIME_OUT.html.var ErrorDocument 500 /error/HTTP_INTERNAL_SERVER_ERROR.html.var ErrorDocument 503 /error/HTTP_SERVICE_UNAVAILABLE.html.var BrowserMatch "Mozilla/2" nokeepalive BrowserMatch "MSIE 4.0b2;" nokeepalive downgrade-1.0 force-response-1.0 BrowserMatch "RealPlayer 4.0" force-response-1.0 BrowserMatch "Java/1.0" force-response-1.0 BrowserMatch "JDK/1.0" force-response-1.0 BrowserMatch "Microsoft Data Access Internet Publishing Provider" redirect-carefully BrowserMatch "MS FrontPage" redirect-carefully BrowserMatch "^WebDrive" redirect-carefully BrowserMatch "^WebDAVFS/1.[0123]" redirect-carefully BrowserMatch "^gnome-vfs/1.0" redirect-carefully BrowserMatch "^XML Spy" redirect-carefully BrowserMatch "^Dreamweaver-WebDAV-SCM1" redirect-carefully Order allow,deny Allow from all # phpMyAdmin.conf Alias /phpMyAdmin /usr/share/phpMyAdmin Alias /phpmyadmin /usr/share/phpMyAdmin Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Allow,Deny Allow from All Allow from 127.0.0.1 Allow from ::1 Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Order Deny,Allow Deny from All Allow from None Can anyone help into this area please. Urgent reply will be appreciatable because i am struggling since one and half month for this matter. thank you, Atul

  Read the article

• Segmentation Fault (11) with modwsgi on CentOS 5.7 when running pyramid app

  - by carbotex

  I'm getting Segmentation fault error when trying to access the "Hello World" pyramid app. This error only occurs when running against CentOS 5.7 setup, but no problem whatsoever when tested against OSX and Arch Linux. Could it be a CentOS specific issue? [error] [client 10.211.55.2] Premature end of script headers: pyramid.wsgi [notice] child pid 31212 exit signal Segmentation fault (11) I have tried to follow the troubleshooting guides posted here http://code.google.com/p/modwsgi/wiki/InstallationIssues which suggests that it might caused by missing Shared Library. A quick check reveals that shared library is not the issue. [centos57@localhost modules]$ ldd mod_wsgi.so linux-gate.so.1 => (0x00e6a000) libpython2.7.so.1.0 => /home/python/lib/libpython2.7.so.1.0 (0x0024c000) libpthread.so.0 => /lib/libpthread.so.0 (0x00da8000) libdl.so.2 => /lib/libdl.so.2 (0x00cd6000) libutil.so.1 => /lib/libutil.so.1 (0x00110000) libm.so.6 => /lib/libm.so.6 (0x0085c000) libc.so.6 => /lib/libc.so.6 (0x00682000) /lib/ld-linux.so.2 (0x0012b000) Then I found another clue that might be able to solve my problem. Unfortunately libexpat is not the source of the problem. http://code.google.com/p/modwsgi/wiki/IssuesWithExpatLibrary [centos57@localhost bin]$ ldd ~/httpd/bin/httpd | grep expat libexpat.so.1 => /usr/local/lib/libexpat.so.1 (0x00b00000) [centos57@localhost bin]$ strings /usr/local/lib/libexpat.so.1 | grep expat libexpat.so.1 expat_2.0.1 [centos57@localhost bin]$ python Python 2.7.2 (default, Nov 26 2011, 08:08:44) [GCC 4.1.2 20080704 (Red Hat 4.1.2-51)] on linux2 Type "help", "copyright", "credits" or "license" for more information. >>> import pyexpat >>> pyexpat.version_info (2, 0, 0) >>> I've been pulling my hair out trying to figure out what I'm missing in my setup. Why the problem only occurs with CentOS? Here is the detailed setup: Apache 2.2.19 Python 2.7.2 mod_wsgi-3.3 /home/httpd/conf/extra/pyramid.wsgi from pyramid.paster import get_app application = get_app('/home/homecamera/hcadmin/root/production.ini', 'main') /home/httpd/conf/extra/modwsgi.conf LoadModule wsgi_module modules/mod_wsgi.so WSGIScriptAlias /myapp /home/root/test.wsgi <Directory /home/root> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> # Use only 1 Python sub-interpreter. Multiple sub-interpreters # play badly with C extensions. WSGIApplicationGroup %{GLOBAL} WSGIPassAuthorization On WSGIDaemonProcess pyramid user=daemon group=daemon processes=1 \ threads=4 \ python-path=/home/python/lib/python2.7/site-packages WSGIScriptAlias /hello /home/httpd/conf/extra/pyramid.wsgi <Directory /home/httpd/conf/extra> WSGIProcessGroup pyramid Order allow,deny Allow from all </Directory> Again this same setup works on OSX and Arch Linux but not on CentOS 5.7. Could someone out there point me to the right direction before I ran out of my hair. ==================================================================================== When apache started with gdb, I got a couple of warnings Reading symbols from /home/httpd/bin/httpd...done. Attaching to program: /home/httpd/bin/httpd, process 1821 warning: .dynamic section for "/lib/libcrypt.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libutil.so.1" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations gdb output. After hitting refresh button, to load pyramid. (gdb) cont Continuing. warning: .dynamic section for "/usr/lib/libgssapi_krb5.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/usr/lib/libkrb5.so.3" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations warning: .dynamic section for "/lib/libresolv.so.2" is not at the expected address warning: difference appears to be caused by prelink, adjusting expectations Program received signal SIGSEGV, Segmentation fault. [Switching to Thread 0x8edbb90 (LWP 1824)] 0x0814c120 in EVP_PKEY_CTX_dup () apache_error_log [info] mod_wsgi (pid=1821): Starting process 'pyramid' with threads=1. [info] mod_wsgi (pid=1821): Initializing Python. [info] mod_wsgi (pid=1821): Attach interpreter ''. [info] mod_wsgi (pid=1821): Create interpreter 'web.domain.com:20000|/hcadmin'. [info] [client 10.211.55.2] mod_wsgi (pid=1821, process='pyramid', application='web.domain.com:20000|/hcadmin'): Loading WSGI script '/home/httpd/conf/extra/pyramid.wsgi'. [error] hello 1

  Read the article

• Poor upload/download speed on 2 x ADSL lines into a Cisco 2621XM

  - by 2020mobile

  Hi, Sorry never been on this site before so I apologise if not the right section or even forum. I have users complaining of very slow internetn connectivity on site and have checked with our ISP who have said that the line is testing at 8mb. We have 2 x BT lines that have our ISP broadand on them. Both lines go into a Cisco 2600 series router that then has a PIX firewall off that. Connectivity is successful just gone really slow and unable to download anything. Config is below: version 12.3 no service pad service tcp-keepalives-in service tcp-keepalives-out service timestamps debug datetime msec service timestamps log datetime msec service password-encryption ! hostname ROUTER-ADSL-INTERNET ! logging buffered 16384 informational enable secret xxx enable password xxx ! username xxx username xxx clock summer-time UK recurring last Sun Mar 1:00 last Sun Oct 1:00 aaa new-model ! ! aaa authentication login default local aaa authorization exec default local aaa session-id common ip subnet-zero no ip source-route ! ! ! ip audit notify log ip audit po max-events 100 no ip bootp server ip name-server 213.208.106.212 no mpls ldp logging neighbor-changes no ftp-server write-enable ! ! ! ! ! ! ! ! ! ! no voice hpi capture buffer no voice hpi capture destination ! ! ! ! ! ! ! ! interface ATM0/0 description 01270 111111 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/0 ip address 82.133.32.9 255.255.255.248 shutdown speed 100 full-duplex no cdp enable ! interface ATM0/1 description 01270 222222 no ip address no atm ilmi-keepalive pvc 0/38 encapsulation aal5mux ppp dialer dialer pool-member 1 ! dsl operating-mode auto ! interface FastEthernet0/1 ip address 217.146.115.49 255.255.255.240 duplex auto speed auto no cdp enable ! interface Dialer0 ip address 217.146.115.250 255.255.255.248 encapsulation ppp dialer pool 1 dialer-group 1 ppp authentication chap callin ppp chap hostname [email protected] ppp chap password 7 xxxxx ppp multilink ! ip classless ip route 0.0.0.0 0.0.0.0 Dialer0 ! no ip http server no ip http secure-server ! no logging trap access-list 10 permit 217.146.115.50 access-list 10 permit 82.133.32.10 access-list 10 deny any access-list 22 permit 217.146.115.50 access-list 22 permit 217.206.239.86 access-list 22 permit 82.133.32.10 access-list 22 deny any dialer-list 1 protocol ip permit no cdp run ! ! snmp-server community xxxxxx RO 10 snmp-server enable traps tty radius-server authorization permit missing Service-Type ! ! ! ! ! ! line con 0 exec-timeout 5 0 password 7 xxxxxx line aux 0 no exec line vty 0 4 access-class 22 in exec-timeout 5 0 password 7 xxxxxx transport input telnet ssh transport output none line vty 5 15 password 7 xxxxxx transport input telnet ssh ! ntp clock-period 17180095 ntp server 130.88.200.98 ! ! end Now my knowledge is very limited but ISP have said that while the lines are bonded each needs a seperate login as they've recently changed their L2TP router and that enforces the use of seperate logins - when the lines were configured we were given two logins. So, my question is what changes do I need to make to the config in order to get this working? it was ok before their change and I do have another login :- 01270 111111 - [email protected] 01270 222222 - [email protected] Apologies for the long email and thanks for taking the time to read it. Any more info I can provide please let me know. Thanks,

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• VSFTPD Unable to set write permissions on folder

  - by Frank Astin

  I've just set up my first FTP server with VSFTPD on cent os . I can connect to it fine using a user in the group ftp-users but I get read only access . I've tried several different CHMOD codes on the folder (even 777) all to no avail . This is the tutorial I used to set up the server http://tinyurl.com/73pyuxz hopefully you'll be able to see something I missed. Thanks in advance . Requested Config File : # Example config file /etc/vsftpd/vsftpd.conf # # The default compiled in settings are fairly paranoid. This sample file # loosens things up a bit, to make the ftp daemon more usable. # Please see vsftpd.conf.5 for all compiled in defaults. # # READ THIS: This example file is NOT an exhaustive list of vsftpd options. # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's # capabilities. # # Allow anonymous FTP? (Beware - allowed by default if you comment this out). anonymous_enable=NO # # Uncomment this to allow local users to log in. local_enable=YES # # Uncomment this to enable any form of FTP write command. write_enable=YES # # Default umask for local users is 077. You may wish to change this to 022, # if your users expect that (022 is used by most other ftpd's) local_umask=022 # # Uncomment this to allow the anonymous FTP user to upload files. This only # has an effect if the above global write enable is activated. Also, you will # obviously need to create a directory writable by the FTP user. #anon_upload_enable=YES # # Uncomment this if you want the anonymous FTP user to be able to create # new directories. #anon_mkdir_write_enable=YES # # Activate directory messages - messages given to remote users when they # go into a certain directory. dirmessage_enable=YES # # The target log file can be vsftpd_log_file or xferlog_file. # This depends on setting xferlog_std_format parameter xferlog_enable=YES # # Make sure PORT transfer connections originate from port 20 (ftp-data). connect_from_port_20=YES # # If you want, you can arrange for uploaded anonymous files to be owned by # a different user. Note! Using "root" for uploaded files is not # recommended! #chown_uploads=YES #chown_username=whoever # # The name of log file when xferlog_enable=YES and xferlog_std_format=YES # WARNING - changing this filename affects /etc/logrotate.d/vsftpd.log #xferlog_file=/var/log/xferlog # # Switches between logging into vsftpd_log_file and xferlog_file files. # NO writes to vsftpd_log_file, YES to xferlog_file xferlog_std_format=YES # # You may change the default value for timing out an idle session. #idle_session_timeout=600 # # You may change the default value for timing out a data connection. #data_connection_timeout=120 # # It is recommended that you define on your system a unique user which the # ftp server can use as a totally isolated and unprivileged user. #nopriv_user=ftpsecure # # Enable this and the server will recognise asynchronous ABOR requests. Not # recommended for security (the code is non-trivial). Not enabling it, # however, may confuse older FTP clients. #async_abor_enable=YES # # By default the server will pretend to allow ASCII mode but in fact ignore # the request. Turn on the below options to have the server actually do ASCII # mangling on files when in ASCII mode. # Beware that on some FTP servers, ASCII support allows a denial of service # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd # predicted this attack and has always been safe, reporting the size of the # raw file. # ASCII mangling is a horrible feature of the protocol. #ascii_upload_enable=YES #ascii_download_enable=YES # # You may fully customise the login banner string: #ftpd_banner=Welcome to blah FTP service. # # You may specify a file of disallowed anonymous e-mail addresses. Apparently # useful for combatting certain DoS attacks. #deny_email_enable=YES # (default follows) #banned_email_file=/etc/vsftpd/banned_emails # # You may specify an explicit list of local users to chroot() to their home # directory. If chroot_local_user is YES, then this list becomes a list of # users to NOT chroot(). #chroot_list_enable=YES # (default follows) #chroot_list_file=/etc/vsftpd/chroot_list # # You may activate the "-R" option to the builtin ls. This is disabled by # default to avoid remote users being able to cause excessive I/O on large # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume # the presence of the "-R" option, so there is a strong case for enabling it. #ls_recurse_enable=YES # # When "listen" directive is enabled, vsftpd runs in standalone mode and # listens on IPv4 sockets. This directive cannot be used in conjunction # with the listen_ipv6 directive. listen=YES # # This directive enables listening on IPv6 sockets. To listen on IPv4 and IPv6 # sockets, you must run two copies of vsftpd whith two configuration files. # Make sure, that one of the listen options is commented !! #listen_ipv6=YES pam_service_name=vsftpd userlist_enable=YES tcp_wrappers=YES

  Read the article

• SSH service will not start on fresh Cygwin 1.7.15 install

  - by Coder6841

  OS: Windows 7 x64 Cygwin: 1.7.15-1 OpenSSH: 6.0p1-1 I'm attempting to install an SSH server on Windows 7. The tutorial that I'm following to do this is here: http://www.howtogeek.com/howto/41560/how-to-get-ssh-command-line-access-to-windows-7-using-cygwin/ The issue is that upon executing the net start sshd command I get the following output:The CYGWIN sshd service is starting. The CYGWIN sshd service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. Here is the full output of the setup: AdminUser@ThisComputer ~ $ ssh-host-config *** Info: Generating /etc/ssh_host_key *** Info: Generating /etc/ssh_host_rsa_key *** Info: Generating /etc/ssh_host_dsa_key *** Info: Generating /etc/ssh_host_ecdsa_key *** Info: Creating default /etc/ssh_config file *** Info: Creating default /etc/sshd_config file *** Info: Privilege separation is set to yes by default since OpenSSH 3.3. *** Info: However, this requires a non-privileged account called 'sshd'. *** Info: For more info on privilege separation read /usr/share/doc/openssh/README.privsep. *** Query: Should privilege separation be used? (yes/no) yes *** Info: Note that creating a new user requires that the current account have *** Info: Administrator privileges. Should this script attempt to create a *** Query: new local account 'sshd'? (yes/no) yes *** Info: Updating /etc/sshd_config file *** Query: Do you want to install sshd as a service? *** Query: (Say "no" if it is already installed as a service) (yes/no) yes *** Query: Enter the value of CYGWIN for the daemon: [] *** Info: On Windows Server 2003, Windows Vista, and above, the *** Info: SYSTEM account cannot setuid to other users -- a capability *** Info: sshd requires. You need to have or to create a privileged *** Info: account. This script will help you do so. *** Info: You appear to be running Windows XP 64bit, Windows 2003 Server, *** Info: or later. On these systems, it's not possible to use the LocalSystem *** Info: account for services that can change the user id without an *** Info: explicit password (such as passwordless logins [e.g. public key *** Info: authentication] via sshd). *** Info: If you want to enable that functionality, it's required to create *** Info: a new account with special privileges (unless a similar account *** Info: already exists). This account is then used to run these special *** Info: servers. *** Info: Note that creating a new user requires that the current account *** Info: have Administrator privileges itself. *** Info: No privileged account could be found. *** Info: This script plans to use 'cyg_server'. *** Info: 'cyg_server' will only be used by registered services. *** Query: Do you want to use a different name? (yes/no) no *** Query: Create new privileged user account 'cyg_server'? (yes/no) yes *** Info: Please enter a password for new user cyg_server. Please be sure *** Info: that this password matches the password rules given on your system. *** Info: Entering no password will exit the configuration. *** Query: Please enter the password: *** Query: Reenter: *** Info: User 'cyg_server' has been created with password '[CENSORED]'. *** Info: If you change the password, please remember also to change the *** Info: password for the installed services which use (or will soon use) *** Info: the 'cyg_server' account. *** Info: Also keep in mind that the user 'cyg_server' needs read permissions *** Info: on all users' relevant files for the services running as 'cyg_server'. *** Info: In particular, for the sshd server all users' .ssh/authorized_keys *** Info: files must have appropriate permissions to allow public key *** Info: authentication. (Re-)running ssh-user-config for each user will set *** Info: these permissions correctly. [Similar restrictions apply, for *** Info: instance, for .rhosts files if the rshd server is running, etc]. *** Info: The sshd service has been installed under the 'cyg_server' *** Info: account. To start the service now, call `net start sshd' or *** Info: `cygrunsrv -S sshd'. Otherwise, it will start automatically *** Info: after the next reboot. *** Info: Host configuration finished. Have fun! AdminUser@ThisComputer ~ $ net start sshd The CYGWIN sshd service is starting. The CYGWIN sshd service could not be started. The service did not report an error. More help is available by typing NET HELPMSG 3534. Note that on the line *** Query: Enter the value of CYGWIN for the daemon: [] I haven't entered anything. Tutorials often say to use ntsec or ntsec tty here but those options are removed from the latest version of OpenSSH. I've tried using them anyway and the result is the same. The file /var/log/sshd.log is empty. If I try just running the command /usr/sbin/sshd I get the output /var/empty must be owned by root and not group or world-writable.. The /var/empty directory has the following permissions: drwxr-xr-x+ 1 cyg_server root 0 May 29 15:28 empty. Google searches on this error did not turn up any working fixes. One person seems to have solved it by using the command chown SYSTEM /var/empty but that did not fix it in my case.

  Read the article

• Installing nGinX Reverse Proxy on CentOS 5

  - by heavymark

  I'm trying to install nGinX as a reverse proxy on CentOS 5 with apache. The instructions to do this are here: http://wiki.mediatemple.net/w/(dv):Configure_nginx_as_reverse_proxy_web_server Note- in the instructions, for the url to get nginx I'm using the following: http://nginx.org/download/nginx-1.0.10.tar.gz Now here is my problem. After installing the required packages and running .configure I get the following: checking for OS + Linux 2.6.18-028stab094.3 x86_64 checking for C compiler ... found + using GNU C compiler + gcc version: 4.1.2 20080704 (Red Hat 4.1.2-51) checking for gcc -pipe switch ... found checking for gcc builtin atomic operations ... found checking for C99 variadic macros ... found checking for gcc variadic macros ... found checking for unistd.h ... found checking for inttypes.h ... found checking for limits.h ... found checking for sys/filio.h ... not found checking for sys/param.h ... found checking for sys/mount.h ... found checking for sys/statvfs.h ... found checking for crypt.h ... found checking for Linux specific features checking for epoll ... found checking for sendfile() ... found checking for sendfile64() ... found checking for sys/prctl.h ... found checking for prctl(PR_SET_DUMPABLE) ... found checking for sched_setaffinity() ... found checking for crypt_r() ... found checking for sys/vfs.h ... found checking for nobody group ... found checking for poll() ... found checking for /dev/poll ... not found checking for kqueue ... not found checking for crypt() ... not found checking for crypt() in libcrypt ... found checking for F_READAHEAD ... not found checking for posix_fadvise() ... found checking for O_DIRECT ... found checking for F_NOCACHE ... not found checking for directio() ... not found checking for statfs() ... found checking for statvfs() ... found checking for dlopen() ... not found checking for dlopen() in libdl ... found checking for sched_yield() ... found checking for SO_SETFIB ... not found checking for SO_ACCEPTFILTER ... not found checking for TCP_DEFER_ACCEPT ... found checking for accept4() ... not found checking for int size ... 4 bytes checking for long size ... 8 bytes checking for long long size ... 8 bytes checking for void * size ... 8 bytes checking for uint64_t ... found checking for sig_atomic_t ... found checking for sig_atomic_t size ... 4 bytes checking for socklen_t ... found checking for in_addr_t ... found checking for in_port_t ... found checking for rlim_t ... found checking for uintptr_t ... uintptr_t found checking for system endianess ... little endianess checking for size_t size ... 8 bytes checking for off_t size ... 8 bytes checking for time_t size ... 8 bytes checking for setproctitle() ... not found checking for pread() ... found checking for pwrite() ... found checking for sys_nerr ... found checking for localtime_r() ... found checking for posix_memalign() ... found checking for memalign() ... found checking for mmap(MAP_ANON|MAP_SHARED) ... found checking for mmap("/dev/zero", MAP_SHARED) ... found checking for System V shared memory ... found checking for POSIX semaphores ... not found checking for POSIX semaphores in libpthread ... found checking for struct msghdr.msg_control ... found checking for ioctl(FIONBIO) ... found checking for struct tm.tm_gmtoff ... found checking for struct dirent.d_namlen ... not found checking for struct dirent.d_type ... found checking for PCRE library ... found checking for system md library ... not found checking for system md5 library ... not found checking for OpenSSL md5 crypto library ... found checking for sha1 in system md library ... not found checking for OpenSSL sha1 crypto library ... found checking for zlib library ... found creating objs/Makefile Configuration summary + using system PCRE library + OpenSSL library is not used + md5: using system crypto library + sha1: using system crypto library + using system zlib library nginx path prefix: "/usr/local/nginx" nginx binary file: "/usr/local/nginx/sbin/nginx" nginx configuration prefix: "/usr/local/nginx/conf" nginx configuration file: "/usr/local/nginx/conf/nginx.conf" nginx pid file: "/usr/local/nginx/logs/nginx.pid" nginx error log file: "/usr/local/nginx/logs/error.log" nginx http access log file: "/usr/local/nginx/logs/access.log" nginx http client request body temporary files: "client_body_temp" nginx http proxy temporary files: "proxy_temp" nginx http fastcgi temporary files: "fastcgi_temp" nginx http uwsgi temporary files: "uwsgi_temp" nginx http scgi temporary files: "scgi_temp" It says if you get errors to stop and make sure packages are installed. I didn't get errors but as you can see I got several "not founds". Are those considered errors? If so how do I resolve that. And as noted in the link, I cannot install through yum, because it wont work with plesk then. Thanks!

  Read the article

• Allow Incoming Responses Apache. On Ubuntu 11.10 - Curl

  - by Daniel Adarve

  I'm trying to get a Curl Response from an outside server, however I noticed I cant neither PING the server in question nor connect to it. I tried disabling the iptables firewall but I had no success. My server is running behind a Cisco Linksys WRTN310N Router with the DD-wrt firmware Installed. In which I already disabled the firewall. Here are my network settings: Ifconfig eth0 Link encap:Ethernet HWaddr 00:26:b9:76:73:6b inet addr:192.168.1.120 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::226:b9ff:fe76:736b/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 RX packets:49713 errors:0 dropped:0 overruns:0 frame:0 TX packets:30987 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:1000 RX bytes:52829022 (52.8 MB) TX bytes:5438223 (5.4 MB) Interrupt:16 lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:16436 Metric:1 RX packets:341 errors:0 dropped:0 overruns:0 frame:0 TX packets:341 errors:0 dropped:0 overruns:0 carrier:0 collisions:0 txqueuelen:0 RX bytes:27604 (27.6 KB) TX bytes:27604 (27.6 KB) /etc/resolv.conf nameserver 192.168.1.1 /etc/nsswitch.com passwd: compat group: compat shadow: compat hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files netgroup: nis /etc/host.conf order hosts,bind multi on /etc/hosts 127.0.0.1 localhost 127.0.0.1 callcenter # The following lines are desirable for IPv6 capable hosts ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters /etc/network/interfaces # The loopback network interface auto lo iface lo inet loopback # The primary network interface auto eth0 iface eth0 inet static address 192.168.1.120 netmask 255.255.255.0 network 192.168.1.1 broadcast 192.168.1.255 gateway 192.168.1.1 The Url to which im trying to get a connection to is https://www.veripayment.com/integration/index.php When I ping it on terminal heres what I get daniel@callcenter:~$ ping https://www.veripayment.com/integration/index.php ping: unknown host https://www.veripayment.com/integration/index.php daniel@callcenter:~$ ping www.veripayment.com PING www.veripayment.com (69.172.200.5) 56(84) bytes of data. --- www.veripayment.com ping statistics --- 2 packets transmitted, 0 received, 100% packet loss, time 1007ms PHP Function in codeigniter public function authorizePayment(){ //--------------------------------------------------- // Authorize a payment //--------------------------------------------------- // Get variables from POST array $post_str = "action=payment&business=" .urlencode($this->input->post('business')) ."&vericode=" .urlencode($this->input->post('vericode')) ."&item_name=" .urlencode($this->input->post('item_name')) ."&item_code=" .urlencode($this->input->post('item_code')) ."&quantity=" .urlencode($this->input->post('quantity')) ."&amount=" .urlencode($this->input->post('amount')) ."&cc_type=" .urlencode($this->input->post('cc_type')) ."&cc_number=" .urlencode($this->input->post('cc_number')) ."&cc_expdate=" .urlencode($this->input->post('cc_expdate_year')).urlencode($this->input->post('cc_expdate_month')) ."&cc_security_code=" .urlencode($this->input->post('cc_security_code')) ."&shipment=" .urlencode($this->input->post('shipment')) ."&first_name=" .urlencode($this->input->post('first_name')) ."&last_name=" .urlencode($this->input->post('last_name')) ."&address=" .urlencode($this->input->post('address')) ."&city=" .urlencode($this->input->post('city')) ."&state_or_province=" .urlencode($this->input->post('state_or_province')) ."&zip_or_postal_code=" .urlencode($this->input->post('zip_or_postal_code')) ."&country=" .urlencode($this->input->post('country')) ."&shipping_address=" .urlencode($this->input->post('shipping_address')) ."&shipping_city=" .urlencode($this->input->post('shipping_city')) ."&shipping_state_or_province=" .urlencode($this->input->post('shipping_state_or_province')) ."&shipping_zip_or_postal_code=".urlencode($this->input->post('shipping_zip_or_postal_code')) ."&shipping_country=" .urlencode($this->input->post('shipping_country')) ."&phone=" .urlencode($this->input->post('phone')) ."&email=" .urlencode($this->input->post('email')) ."&ip_address=" .urlencode($this->input->post('ip_address')) ."&website_unique_id=" .urlencode($this->input->post('website_unique_id')); // Send URL string via CURL $backendUrl = "https://www.veripayment.com/integration/index.php"; $this->curl->create($backendUrl); $this->curl->post($post_str); $return = $this->curl->execute(); $result = array(); // Explode array where blanks are found $resparray = explode(' ', $return); if ($resparray) { // save results into an array foreach ($resparray as $resp) { $keyvalue = explode('=', $resp); if(isset($keyvalue[1])){ $result[$keyvalue[0]] = str_replace('"', '', $keyvalue[1]); } } } return $result; } This gets an empty result array. This function however works well in the previous server where the script was hosted before. No modifications where made whatsoever Thanks in Advance

  Read the article

• Active directory authentication for Ubuntu Linux login and cifs mounting home directories...

  - by Jamie

  I've configured my Ubuntu 10.04 Server LTS Beta 2 residing on a windows network to authenticate logins using active directory, then mount a windows share to serve as there home directory. Here is what I did starting from the initial installation of Ubuntu. Download and install Ubuntu Server 10.04 LTS Beta 2 Get updates # sudo apt-get update && sudo apt-get upgrade Install an SSH server (sshd) # sudo apt-get install openssh-server Some would argue that you should "lock sshd down" by disabling root logins. I figure if your smart enough to hack an ssh session for a root password, you're probably not going to be thwarted by the addition of PermitRootLogin no in the /etc/ssh/sshd_config file. If your paranoid or not simply not convinced then edit the file or give the following a spin: # (grep PermitRootLogin /etc/ssh/sshd_conifg && sudo sed -ri 's/PermitRootLogin ).+/\1no/' /etc/ssh/sshd_conifg) || echo "PermitRootLogin not found. Add it manually." Install required packages # sudo apt-get install winbind samba smbfs smbclient ntp krb5-user Do some basic networking housecleaning in preparation for the specific package configurations to come. Determine your windows domain name, DNS server name, and IP address for the active directory server (for samba). For conveniance I set environment variables for the windows domain and DNS server. For me it was (my AD IP address was 192.168.20.11): # WINDOMAIN=mydomain.local && WINDNS=srv1.$WINDOMAIN If you want to figure out what your domain and DNS server is (I was contractor and didn't know the network) check out this helpful reference. The authentication and file sharing processes for the Windows and Linux boxes need to have their clocks agree. Do this with an NTP service, and on the server version of Ubuntu the NTP service comes installed and preconfigured. The network I was joining had the DNS server serving up the NTP service too. # sudo sed -ri "s/^(server[ \t]).+/\1$WINDNS/" /etc/ntp.conf Restart the NTP daemon # sudo /etc/init.d/ntp restart We need to christen the Linux box on the new network, this is done by editing the host file (replace the DNS of with the FQDN of the windows DNS): # sudo sed -ri "s/^(127\.0\.0\.1[ \t]).*/\1$(hostname).$WINDOMAIN localhost $(hostname)/" /etc/hosts Kerberos configuration. The instructions that follow here aren't to be taken literally: the values for MYDOMAIN.LOCAL and srv1.mydomain.local need to be replaced with what's appropriate for your network when you edit the files. Edit the (previously installed above) /etc/krb5.conf file. Find the [libdefaults] section and change (or add) the key value pair (and it is in UPPERCASE WHERE IT NEEDS TO BE): [libdefaults] default_realm = MYDOMAIN.LOCAL Add the following to the [realms] section of the file: MYDOMAIN.LOCAL = { kdc = srv1.mydomain.local admin_server = srv1.mydomain.local default_domain = MYDOMAIN.LOCAL } Add the following to the [domain_realm] section of the file: .mydomain.local = MYDOMAIN.LOCAL mydomain.local = MYDOMAIN.LOCAL Conmfigure samba. When it's all said done, I don't know where SAMBA fits in ... I used cifs to mount the windows shares ... regardless, my system works and this is how I did it. Replace /etc/samba/smb.conf (remember I was working from a clean distro of Ubuntu, so I wasn't worried about breaking anything): [global] security = ads realm = MYDOMAIN.LOCAL password server = 192.168.20.11 workgroup = MYDOMAIN idmap uid = 10000-20000 idmap gid = 10000-20000 winbind enum users = yes winbind enum groups = yes template homedir = /home/%D/%U template shell = /bin/bash client use spnego = yes client ntlmv2 auth = yes encrypt passwords = yes winbind use default domain = yes restrict anonymous = 2 Start and stop various services. # sudo /etc/init.d/winbind stop # sudo service smbd restart # sudo /etc/init.d/winbind start Setup the authentication. Edit the /etc/nsswitch.conf. Here are the contents of mine: passwd: compat winbind group: compat winbind shadow: compat winbind hosts: files dns networks: files protocols: db files services: db files ethers: db files rpc: db files Start and stop various services. # sudo /etc/init.d/winbind stop # sudo service smbd restart # sudo /etc/init.d/winbind start At this point I could login, home directories didn't exist, but I could login. Later I'll come back and add how I got the cifs automounting to work. Numerous resources were considered so I could figure this out. Here is a short list (a number of these links point to mine own questions on the topic): Samba Kerberos Active Directory WinBind Mounting Linux user home directories on CIFS server Authenticating OpenBSD against Active Directory How to use Active Directory to authenticate linux users Mounting windows shares with Active Directory permissions Using Active Directory authentication with Samba on Ubuntu 9.10 server 64bit How practical is to authenticate a Linux server against AD? Auto-mounting a windows share on Linux AD login

  Read the article

• Getting HAPROXY to redirect http to https in users browser session

  - by Jon

  We are currently using a Internet cloud provider to host our SaaS platform. The platform consists of a Firewall - Cloud Provider SLB - - Apache Web Server - HAPROXY SLB - Liferay Platform We have had to use HAPROXY because of an issue with the cloud providers SLB that meant we were unable to use it for load balancing the Liferay platform applications. I have implemented HAPROXY in our secure tier and that seems to do the trick of load balancing the requests quite adequately. However during testing we encountered a functional issue whereby selecting a sub-menu from the web portal resulted in the application hanging, using an http analyser we saw that the request being passed back to the users browser was in http, from discussing this with the software vendor it transpires that the Liferay application has some hard-coded http links, and that other customers have worked around this by using physical NLB's such as F5 and redirecting the http traffic to https. The entry in the HAPROXY logs reads: haproxy[2717]: haproxy[2717]: <Apache Web Agent>:37957 [11/Apr/2013:08:07:00.128] http-uapi uapi/<ServerName> 0/0/0/9/10 200 4912 - - ---- 4/2/1/2/0 0/0 "GET /servicedesk/controller?docommand=renderradform&!key=esd_sfb001_frm_feedback_forms_list&isportalintegratedmode=true&USR=joe.bloggs%40gmail.com&_dc=1365667773097&redirecturl=controller%3Fdocommand%3Drenderbody%26%21key%3DESD_SFB001_FRM_FEEDBACK_FORMS_LIST%26isportalintegratedmode%3Dtrue&sso_token=ALiYv2UqzLsAhSw1ZchRDlCHlq44Bhj9&ONERROR=%2Fweb%2Fjsp%2Fapps%2Fportal-integration-error.jsp&itype=login&slicetoken=NW51O%242aRo%2C_Zz%2476P_9DTtnFmz6%28bhk&AUTOFORWARDURL=controller%3Fdocommand%3Drenderbody%26%21key%3DESD_SFB001_FRM_FEEDBACK_FORMS_LIST%26isportalintegratedmode%3Dtrue&LOGINPAGE=https%3A%2F%2F<FQDN of Web Portal>%2Fweb%2F4732cf01-82c3-4bc5-b6c9-552253e672cf%2Fworkflow-tools&appid=1&!uid=1&!redownloadToken=7.0.3.1.1363611301.0&userlocale=en_US&!datechanged=2012-05-18%2015:05:31.38 HTTP/1.1" :37957 [11/Apr/2013:08:07:00.128] http-uapi uapi/<ServerName> 0/0/0/9/10 200 4912 - - ---- 4/2/1/2/0 0/0 "GET /servicedesk/controller?docommand=renderradform&!key=esd_sfb001_frm_feedback_forms_list&isportalintegratedmode=true&USR=joe.bloggs%40gmail.com&_dc=1365667773097&redirecturl=controller%3Fdocommand%3Drenderbody%26%21key%3DESD_SFB001_FRM_FEEDBACK_FORMS_LIST%26isportalintegratedmode%3Dtrue&sso_token=ALiYv2UqzLsAhSw1ZchRDlCHlq44Bhj9&ONERROR=%2Fweb%2Fjsp%2Fapps%2Fportal-integration-error.jsp&itype=login&slicetoken=NW51O%242aRo%2C_Zz%2476P_9DTtnFmz6%28bhk&AUTOFORWARDURL=controller%3Fdocommand%3Drenderbody%26%21key%3DESD_SFB001_FRM_FEEDBACK_FORMS_LIST%26isportalintegratedmode%3Dtrue&LOGINPAGE=https%3A%2F%2F<FQDN of Web Portal>%2Fweb%2F4732cf01-82c3-4bc5-b6c9-552253e672cf%2Fworkflow-tools&appid=1&!uid=1&!redownloadToken=7.0.3.1.1363611301.0&userlocale=en_US&!datechanged=2012-05-18%2015:05:31.38 HTTP/1.1" The corresponding HTTP browser entry shows: http://<FQDN of ServiceDesk>/servicedesk/controller?docommand=renderradform&!key=esd_org019_frm_contact_list&isportalintegratedmode=true&USR=joe.bloggs%40gmail.com&_dc=1365665987887&redirecturl=controller%3Fdocommand%3Drenderbody%26%21key%3DESD_ORG019_FRM_CONTACT_LIST%26isportalintegratedmode%3Dtrue&sso_token=3NxsXYORMPp32SwL8ftVUCMH2QdWLH82&ONERROR=%2Fweb%2Fjsp%2Fapps%2Fportal-integration-error.jsp&itype=login&slicetoken=NW51O%242aRo%2C_Zz%2476P_9DTtnFmz6%28bhk&AUTOFORWARDURL=controller%3Fdocommand%3Drenderbody%26%21key%3DESD_ORG019_FRM_CONTACT_LIST%26isportalintegratedmode%3Dtrue&LOGINPAGE=https%3A%2F%2F<FQDN of Web Portal>>%2Fweb%2F4732cf01-82c3-4bc5-b6c9-552253e672cf%2Fapplication-setup&appid=1&!uid=1&!redownloadToken=7.0.3.1.1363611301.0&userlocale=en_US&!datechanged=2012-10-26%2019:00:25.08 From reading through the forums and other sites it looks like we should be use to use HAPROXY to redirect the traffic to https, but try as I might I cant get it to work. This is our HAPROXY configuration: global log 127.0.0.1 local2 chroot /var/lib/haproxy pidfile /var/run/haproxy.pid maxconn 4000 user haproxy group haproxy daemon stats socket /var/lib/haproxy/stats defaults mode http log global option httplog option dontlognull option http-server-close option forwardfor except 127.0.0.0/8 option redispatch retries 3 timeout http-request 10s timeout queue 1m timeout connect 10s timeout client 1m timeout server 1m timeout http-keep-alive 10s timeout check 10s maxconn 3000 frontend http-openfire bind *:7070 default_backend openfire backend openfire balance roundrobin server <serverName> <IPv4 Address>:7070 check server <serverName> <IPv4 Address>:7070 check frontend http-uapi bind *:7080 default_backend uapi backend uapi balance roundrobin server <serverName> <IPv4 Address>:7080 check server <serverName> <IPv4 Address>:7080 check frontend http-sec bind *:8080 default_backend sec backend sec balance roundrobin server <serverName> <IPv4 Address>:8080 check server <serverName> <IPv4 Address>:8080 check frontend http-wall bind *:9080 default_backend wall backend wall balance roundrobin server <serverName> <IPv4 Address>:9080 check server <serverName> <IPv4 Address>:9080 check frontend http-xmpp bind *:9090 default_backend xmpp backend xmpp balance roundrobin server <serverName> <IPv4 Address>:9090 check server <serverName> <IPv4 Address>:9090 check frontend http-aim bind *:10080 default_backend aim backend aim balance roundrobin server <serverName> <IPv4 Address>:10080 check server <serverName> <IPv4 Address>:10080 check frontend http-servicedesk bind *:8081 default_backend servicedesk backend servicedesk balance roundrobin server <serverName> <IPv4 Address>:8081 check server <serverName> <IPv4 Address>:8081 check listen stats :1936 mode http stats enable stats hide-version stats realm Haproxy\ Statistics stats uri / stats auth haproxy:<Password> I have tried following the articles listed posted on http://stackoverflow.com/questions/13227544/haproxy-redirecting-http-to-https-ssl and http://parsnips.net/haproxy-http-to-https-redirect/ but that hasn't made any difference. Am I on the right track with this or are we trying to achieve the impossible?, I'm hoping I'm just being an idiot and one of you good people can point me in the right direction.

  Read the article

• Trouble recovering MySQL InnoDB database after server crash

  - by Andy Shinn

  I had a server crash due to a broken iSCSI link (the filesystem went into read-only mode). After repairing the link and rebooting the machine (CentOS 5 / MySQL 5.1), the MySQL server would not start and gave the following error: 100603 19:11:46 mysqld_safe Starting mysqld daemon with databases from /var/lib/mysql InnoDB: The log sequence number in ibdata files does not match InnoDB: the log sequence number in the ib_logfiles! 100603 19:11:46 InnoDB: Database was not shut down normally! InnoDB: Starting crash recovery. InnoDB: Reading tablespace information from the .ibd files... InnoDB: Restoring possible half-written data pages from the doublewrite InnoDB: buffer... InnoDB: Warning: database page corruption or a failed InnoDB: file read of page 112541. InnoDB: Trying to recover it from the doublewrite buffer. InnoDB: Dump of the page: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): lots of binary data 100603 19:11:46 InnoDB: Page checksum 953720272, prior-to-4.0.14-form checksum 2641912043 InnoDB: stored checksum 617821918, prior-to-4.0.14-form stored checksum 2080617765 InnoDB: Page lsn 115 2632899642, low 4 bytes of lsn at page end 2641594600 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Dump of corresponding page in doublewrite buffer: 100603 19:11:46 InnoDB: Page dump in ascii and hex (16384 bytes): more binary data 100603 19:11:46 InnoDB: Page checksum 908374788, prior-to-4.0.14-form checksum 824841363 InnoDB: stored checksum 912869634, prior-to-4.0.14-form stored checksum 2210927931 InnoDB: Page lsn 115 2635312169, low 4 bytes of lsn at page end 2633173354 InnoDB: Page number (if stored to page already) 112541, InnoDB: space id (if created with = MySQL-4.1.1 and stored already) 0 InnoDB: Page may be an index page where index id is 0 616 InnoDB: Also the page in the doublewrite buffer is corrupt. InnoDB: Cannot continue operation. InnoDB: You can try to recover the database with the my.cnf InnoDB: option: InnoDB: innodb_force_recovery=6 100603 19:11:46 mysqld_safe mysqld from pid file /var/run/mysqld/mysqld.pid ended Per the error message, I have tried setting set-variable=innodb_force_recovery=6 in the my.cnf to get to the data. This allows the MySQL server to start. But when I try to do a mysqldump of the database or a SELECT * INTO OUTFILE "filename" FROM broken_table; it seems to endlessly just export the same line over and over again. I have also tried http://code.google.com/p/innodb-tools/. But this tool fails with an error that 'blob' type is not supported. If I try to access the data using the PHP application it crashes MySQL: `100603 19:19:19 - mysqld got signal 11 ; This could be because you hit a bug. It is also possible that this binary or one of the libraries it was linked against is corrupt, improperly built, or misconfigured. This error can also be caused by malfunctioning hardware. We will try our best to scrape up some info that will hopefully help diagnose the problem, but since we have already crashed, something is definitely wrong and this may fail. key_buffer_size=8384512 read_buffer_size=131072 max_used_connections=2 max_threads=151 threads_connected=2 It is possible that mysqld could use up to key_buffer_size + (read_buffer_size + sort_buffer_size)*max_threads = 338317 K bytes of memory Hope that's ok; if not, decrease some variables in the equation. thd: 0x15d33f0 Attempting backtrace. You can use the following information to find out where mysqld died. If you see no messages after this, something went terribly wrong... stack_bottom = 0x453aff00 thread_stack 0x40000 /usr/libexec/mysqld(my_print_stacktrace+0x24) [0x874364] /usr/libexec/mysqld(handle_segfault+0x346) [0x5c9166] /lib64/libpthread.so.0 [0x3a6e40eb10] /usr/libexec/mysqld(rec_get_offsets_func+0x30) [0x7cc310] /usr/libexec/mysqld [0x7674d8] /usr/libexec/mysqld(btr_search_info_update_slow+0x638) [0x768d48] /usr/libexec/mysqld(btr_cur_search_to_nth_level+0xc7d) [0x75f86d] /usr/libexec/mysqld [0x7dd1c1] /usr/libexec/mysqld(row_search_for_mysql+0x18b0) [0x7e03d0] /usr/libexec/mysqld(ha_innobase::general_fetch(unsigned char*, unsigned int, unsigned int)+0x7c) [0x7526fc] /usr/libexec/mysqld(handler::read_multi_range_next(st_key_multi_range**)+0x29) [0x6aed09] /usr/libexec/mysqld(QUICK_RANGE_SELECT::get_next()+0x194) [0x69a964] /usr/libexec/mysqld [0x6aafe9] /usr/libexec/mysqld(sub_select(JOIN*, st_join_table*, bool)+0x56) [0x635196] /usr/libexec/mysqld [0x63f9cd] /usr/libexec/mysqld(JOIN::exec()+0x950) [0x6497c0] /usr/libexec/mysqld(mysql_select(THD*, Item*, TABLE_LIST*, unsigned int, List&, Item*, unsigned int, st_order*, st_order*, Item*, st_order*, unsign ed long long, select_result*, st_select_lex_unit*, st_select_lex*)+0x17b) [0x64b34b] /usr/libexec/mysqld(handle_select(THD*, st_lex*, select_result*, unsigned long)+0x169) [0x64bc79] /usr/libexec/mysqld [0x5d34b6] /usr/libexec/mysqld(mysql_execute_command(THD*)+0x4e5) [0x5d6b45] /usr/libexec/mysqld(mysql_parse(THD*, char const*, unsigned int, char const)+0x211) [0x5dc321] /usr/libexec/mysqld(dispatch_command(enum_server_command, THD*, char*, unsigned int)+0x10b8) [0x5dd3f8] /usr/libexec/mysqld(do_command(THD*)+0xe6) [0x5dd9e6] /usr/libexec/mysqld(handle_one_connection+0x73d) [0x5d036d] /lib64/libpthread.so.0 [0x3a6e40673d] /lib64/libc.so.6(clone+0x6d) [0x3a6d4d3d1d] Trying to get some variables. Some pointers may be invalid and cause the dump to abort... thd-query at 0x15de5e0 = SELECT DISTINCT count(DISTINCT i.itemid) as rowscount,i.hostid FROM items i WHERE ((i.itemid BETWEEN 000000000000000 AND 0999999 99999999)) AND i.type<9 AND (i.hostid IN (10017,10047,10050,10054,10056,10059,10062,10063,10064,10065,10066,10067,10068,10069,10070,10071,10072,10073,100 74,10075,10076,10077,10078,10079,10080,10081,10082,10084,10088,10089,10090,10091,10092,10093,10094,10095,10096,10097,10098,10099,10100,10101,10102,10103,10 104,10105,10106,10107,10108,10109)) GROUP BY i.hostid thd-thread_id=3 thd-killed=NOT_KILLED The manual page at contains information that should help you find out what is causing the crash. 100603 19:19:19 mysqld_safe Number of processes running now: 0 100603 19:19:19 mysqld_safe mysqld restarted` Before recovering form an older backup as a last resort I am looking for anymore suggestions. Thanks!

  Read the article

• What is Causing this IIS 7 Web Service Sporadic Connectivity Error?

  - by dpalau

  On sporadic occasions we receive the following error when attempting to call an .asmx web service from a .Net client application: "The underlying connection was closed: A connection that was expected to be kept alive was closed by the server. Unable to read data from the transport connection: An existing connection was forcibly closed by the remote host." By sporadic I mean that it might occur zero, once every few days, or a half-dozen times a day for some users. It will never occur for the first web service call of a user. And the subsequent (usually the same) call will always work immediately after the failure. The failures happen across a variety of methods in the service and usually happens between 15-20 seconds (according to the log) from the time of the request. Looking in the IIS site log for the particular call will show one or the other of the following windows error codes: 121: The semaphore timeout period has elapsed. 1236: The network connection was aborted by the local system. Some additional environment details: Running on internal network web farm consisting of two servers running IIS7 on Windows Server 2008 OS. These problems did not occur when running in an older IIS6 web farm of three servers running on Windows Server 2003 (and we use a single IIS6/2003 instance for our development and staging environments with no issues). EDIT: Also, all of these server instances are VMWare virtual machines, not sure if that is a surprise anymore or not. The web service is a .Net 2.0/3.5 compiled .asmx web service that has its own application pool (.Net 2.0, integrated pipeline). Only has Windows Authentication enabled. We have another web service on the farm that uses the same physical path as the primary service, the only difference being that Basic Authentication is enabled. This is used for a portion of our ERP system. Have tried using the same and different application pool - no effect on the error. This site isn't hit as often as the primary site and has never had an error. As mentioned, the error will only happen when called from the .Net client - not from other applications. The client application is always creating a new web service object for each request and setting the service credentials to System.Net.CredentialCache.DefaultCredentials. The application is either deployed locally to a client or run in a Citrix server session. Those users running in Citrix doesn't seem to experience the issue, only locally deployed clients. The Citrix servers and the web farm are located in the same physical location and are located in the same IP range (10.67.xx.xx). Locally deployed clients experiencing the error are located elsewhere (10.105.xx.xx, 10.31.xx.xx). I've checked the OS logs to see if I can see any problems but nothing really sticks out. EDIT: Actually, I myself just ran into the error a little bit ago. I decided to check out the logs again and saw that there was a Security log entry of "Audit Failure" at the 'same' time (IIS log entry at 1:39:59, event log entry at 1:39:50). Not sure if this is a coincidence or not, I'll have to check out the logs of previous errors. I'm probably grasping for straws but the details: Log Name: Security Source: Microsoft-Windows-Security-Auditing Date: 7/8/2009 1:39:50 PM Event ID: 5159 Task Category: Filtering Platform Connection Level: Information Keywords: Audit Failure User: N/A Computer: is071019.<**.net Description: The Windows Filtering Platform has blocked a bind to a local port. Application Information: Process ID: 1260 Application Name: \device\harddiskvolume1\windows\system32\svchost.exe Network Information: Source Address: 0.0.0.0 Source Port: 54802 Protocol: 17 Filter Information: Filter Run-Time ID: 0 Layer Name: Resource Assignment Layer Run-Time ID: 36 I've also tried to use Failed Request Tracing in IIS7 but the service call never actually gets to where FRT can capture it (even though the failure is logged in the web service log). The network infrastructure group said they checked out the DNS and any NIC settings are correct so there is no 'flapping'. Everything pans out. I'm not sure that they checked out any domain controller servers though to see if that could be an issue. Any ideas? Or any other debugging strategies to get to the bottom of this? I'm just the developer in charge of the software and don't really have the knowledge on what to investigate from the networking side of things - although it does sound like a networking issue to me based on what is happening. Thanks in advance for any help.

  Read the article

• Relay Access Denied (State 13) Postfix + Dovecot + Mysql

  - by Pierre Jeptha

  So we have been scratching our heads for quite some time over this relay issue that has presented itself since we re-built our mail-server after a failed Webmin update. We are running Debian Karmic with postfix 2.6.5 and Dovecot 1.1.11, sourcing from a Mysql database and authenticating with SASL2 and PAM. Here are the symptoms of our problem: 1) When users are on our local network they can send and receive 100% perfectly fine. 2) When users are off our local network and try to send to domains not of this mail server (ie. gmail) they get the "Relay Access Denied" error. However users can send to domains of this mail server when off the local network fine. 3) We host several virtual domains on this mailserver, the primary domain being airnet.ca. The rest of our virtual domains (ex. jeptha.ca) cannot receive email from domains not hosted by this mailserver (ie. gmail and such cannot send to them). They receive bounce backs of "Relay Access Denied (State 13)". This is regardless of whether they are on our local network or not, which is why it is so urgent for us to get this solved. Here is our main.cf from postfix: myhostname = mail.airnet.ca mydomain = airnet.ca smtpd_banner = $myhostname ESMTP $mail_name (Ubuntu) biff = no smtpd_sasl_type = dovecot queue_directory = /var/spool/postfix smtpd_sasl_path = private/auth smtpd_sender_restrictions = permit_mynetworks permit_sasl_authenticated smtp_sasl_auth_enable = yes smtpd_sasl_auth_enable = yes append_dot_mydomain = no readme_directory = no smtp_tls_security_level = may smtpd_tls_security_level = may smtp_tls_note_starttls_offer = yes smtpd_tls_key_file = /etc/ssl/private/ssl-cert-snakeoil.key smtpd_tls_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem smtpd_tls_loglevel = 1 smtpd_tls_received_header = yes smtpd_tls_auth_only = no alias_maps = proxy:mysql:/etc/postfix/mysql/alias.cf hash:/etc/aliases alias_database = hash:/etc/aliases mydestination = mail.airnet.ca, airnet.ca, localhost.$mydomain mailbox_command = procmail -a "$EXTENSION" mailbox_size_limit = 0 recipient_delimiter = + local_recipient_maps = $alias_maps $virtual_mailbox_maps proxy:unix:passwd.byname home_mailbox = /var/virtual/ mail_spool_directory = /var/spool/mail mailbox_transport = maildrop smtpd_helo_required = yes disable_vrfy_command = yes smtpd_etrn_restrictions = reject smtpd_data_restrictions = reject_unauth_pipelining, permit show_user_unknown_table_name = no proxy_read_maps = $local_recipient_maps $mydestination $virtual_alias_maps $virtual_alias_domains $virtual_mailbox_maps $virtual_mailbox_domains $relay_recipient_maps $relay_domains $canonical_maps $sender_canonical_maps $recipient_canonical_maps $relocated_maps $transport_maps $mynetworks $virtual_mailbox_limit_maps $virtual_uid_maps $virtual_gid_maps virtual_alias_domains = message_size_limit = 20971520 transport_maps = proxy:mysql:/etc/postfix/mysql/vdomain.cf virtual_mailbox_maps = proxy:mysql:/etc/postfix/mysql/vmailbox.cf virtual_alias_maps = proxy:mysql:/etc/postfix/mysql/alias.cf hash:/etc/mailman/aliases virtual_uid_maps = proxy:mysql:/etc/postfix/mysql/vuid.cf virtual_gid_maps = proxy:mysql:/etc/postfix/mysql/vgid.cf virtual_mailbox_base = / virtual_mailbox_limit = 209715200 virtual_mailbox_extended = yes virtual_create_maildirsize = yes virtual_mailbox_limit_maps = proxy:mysql:/etc/postfix/mysql/vmlimit.cf virtual_mailbox_limit_override = yes virtual_mailbox_limit_inbox = no virtual_overquote_bounce = yes virtual_minimum_uid = 1 maximal_queue_lifetime = 1d bounce_queue_lifetime = 4h delay_warning_time = 1h append_dot_mydomain = no qmgr_message_active_limit = 500 broken_sasl_auth_clients = yes smtpd_sasl_path = private/auth smtpd_sasl_local_domain = $myhostname smtpd_sasl_security_options = noanonymous smtpd_sasl_authenticated_header = yes smtp_bind_address = 142.46.193.6 relay_domains = $mydestination mynetworks = 127.0.0.0, 142.46.193.0/25 inet_interfaces = all inet_protocols = all And here is the master.cf from postfix: # ========================================================================== # service type private unpriv chroot wakeup maxproc command + args # (yes) (yes) (yes) (never) (100) # ========================================================================== smtp inet n - - - - smtpd #submission inet n - - - - smtpd # -o smtpd_tls_security_level=encrypt # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #smtps inet n - - - - smtpd # -o smtpd_tls_wrappermode=yes # -o smtpd_sasl_auth_enable=yes # -o smtpd_client_restrictions=permit_sasl_authenticated,reject # -o milter_macro_daemon_name=ORIGINATING #628 inet n - - - - qmqpd pickup fifo n - - 60 1 pickup cleanup unix n - - - 0 cleanup qmgr fifo n - n 300 1 qmgr #qmgr fifo n - - 300 1 oqmgr tlsmgr unix - - - 1000? 1 tlsmgr rewrite unix - - - - - trivial-rewrite bounce unix - - - - 0 bounce defer unix - - - - 0 bounce trace unix - - - - 0 bounce verify unix - - - - 1 verify flush unix n - - 1000? 0 flush proxymap unix - - n - - proxymap proxywrite unix - - n - 1 proxymap smtp unix - - - - - smtp # When relaying mail as backup MX, disable fallback_relay to avoid MX loops relay unix - - - - - smtp -o smtp_fallback_relay= # -o smtp_helo_timeout=5 -o smtp_connect_timeout=5 showq unix n - - - - showq error unix - - - - - error retry unix - - - - - error discard unix - - - - - discard local unix - n n - - local virtual unix - n n - - virtual lmtp unix - - - - - lmtp anvil unix - - - - 1 anvil scache unix - - - - 1 scache maildrop unix - n n - - pipe flags=DRhu user=vmail argv=/usr/bin/maildrop -d ${recipient} # # See the Postfix UUCP_README file for configuration details. # uucp unix - n n - - pipe flags=Fqhu user=uucp argv=uux -r -n -z -a$sender - $nexthop!rmail ($recipient) # # Other external delivery methods. # ifmail unix - n n - - pipe flags=F user=ftn argv=/usr/lib/ifmail/ifmail -r $nexthop ($recipient) bsmtp unix - n n - - pipe flags=Fq. user=bsmtp argv=/usr/lib/bsmtp/bsmtp -t$nexthop -f$sender $recipient scalemail-backend unix - n n - 2 pipe flags=R user=scalemail argv=/usr/lib/scalemail/bin/scalemail-store ${nexthop} ${user} ${extension} mailman unix - n n - - pipe flags=FR user=list argv=/usr/lib/mailman/bin/postfix-to-mailman.py ${nexthop} ${user} spfpolicy unix - n n - - spawn user=nobody argv=/usr/bin/perl /usr/sbin/postfix-policyd-spf-perl smtp-amavis unix - - n - 4 smtp -o smtp_data_done_timeout=1200 -o smtp_send_xforward_command=yes -o disable_dns_lookups=yes #127.0.0.1:10025 inet n - n - - smtpd dovecot unix - n n - - pipe flags=DRhu user=dovecot:21pever1lcha0s argv=/usr/lib/dovecot/deliver -d ${recipient Here is Dovecot.conf protocols = imap imaps pop3 pop3s disable_plaintext_auth = no log_path = /etc/dovecot/logs/err info_log_path = /etc/dovecot/logs/info log_timestamp = "%Y-%m-%d %H:%M:%S ". syslog_facility = mail ssl_listen = 142.46.193.6 ssl_disable = no ssl_cert_file = /etc/ssl/certs/ssl-cert-snakeoil.pem ssl_key_file = /etc/ssl/private/ssl-cert-snakeoil.key mail_location = mbox:~/mail:INBOX=/var/virtual/%d/mail/%u mail_privileged_group = mail mail_debug = yes protocol imap { login_executable = /usr/lib/dovecot/imap-login mail_executable = /usr/lib/dovecot/rawlog /usr/lib/dovecot/imap mail_executable = /usr/lib/dovecot/gdbhelper /usr/lib/dovecot/imap mail_executable = /usr/lib/dovecot/imap imap_max_line_length = 65536 mail_max_userip_connections = 20 mail_plugin_dir = /usr/lib/dovecot/modules/imap login_greeting_capability = yes } protocol pop3 { login_executable = /usr/lib/dovecot/pop3-login mail_executable = /usr/lib/dovecot/pop3 pop3_enable_last = no pop3_uidl_format = %08Xu%08Xv mail_max_userip_connections = 10 mail_plugin_dir = /usr/lib/dovecot/modules/pop3 } protocol managesieve { sieve=~/.dovecot.sieve sieve_storage=~/sieve } mail_plugin_dir = /usr/lib/dovecot/modules/lda auth_executable = /usr/lib/dovecot/dovecot-auth auth_process_size = 256 auth_cache_ttl = 3600 auth_cache_negative_ttl = 3600 auth_username_chars = abcdefghijklmnopqrstuvwxyzABCDEFGHIJKLMNOPQRSTUVWXYZ01234567890.-_@ auth_verbose = yes auth_debug = yes auth_debug_passwords = yes auth_worker_max_count = 60 auth_failure_delay = 2 auth default { mechanisms = plain login passdb sql { args = /etc/dovecot/dovecot-sql.conf } userdb sql { args = /etc/dovecot/dovecot-sql.conf } socket listen { client { path = /var/spool/postfix/private/auth mode = 0660 user = postfix group = postfix } master { path = /var/run/dovecot/auth-master mode = 0600 } } } Please, if you require anything do not hesistate, I will post it ASAP. Any help or suggestions are greatly appreciated! Thanks, Pierre

  Read the article

• How do I configure OpenVPN for accessing the internet with one NIC?

  - by Lekensteyn

  I've been trying to get OpenVPN to work for three days. After reading many questions, the HOWTO, the FAQ and even parts of a guide to Linux networking, I cannot get my an Internet connection to the Internet. I'm trying to set up a OpenVPN server on a VPS, which will be used for: secure access to the Internet bypassing port restrictions (directadmin/2222 for example) an IPv6 connection (my client does only have IPv4 connectivity, while the VPS has both IPv4 and native IPv6 connectivity) (if possible) I can connect to my server and access the machine (HTTP), but Internet connectivity fails completely. I'm using ping 8.8.8.8 for testing whether my connection works or not. Using tcpdump and iptables -t nat -A POSTROUTING -j LOG, I can confirm that the packets reach my server. If I ping to 8.8.8.8 on the VPS, I get an echo-reply from 8.8.8.8 as expected. When pinging from the client, I do not get an echo-reply. The VPS has only one NIC: etho. It runs on Xen. Summary: I want to have a secure connection between my laptop and the Internet using OpenVPN. If that works, I want to have IPv6 connectivity as well. Network setup and software: Home laptop (eth0: 192.168.2.10) (tap0: 10.8.0.2) | | (running Kubuntu 10.10; OpenVPN 2.1.0-3ubuntu1) | wifi | router/gateway (gateway 192.168.2.1) | INTERNET | VPS (eth0:1.2.3.4) (gateway, tap0: 10.8.0.1) (running Debian 6; OpenVPN 2.1.3-2) wifi and my home router should not cause problems since all traffic goes encrypted over UDP port 1194. I've turned IP forwarding on: # echo 1 > /proc/sys/net/ipv4/ip_forward iptables has been configured to allow forwarding traffic as well: iptables -F FORWARD iptables -A FORWARD -m state --state RELATED,ESTABLISHED -j ACCEPT iptables -A FORWARD -s 10.8.0.0/24 -j ACCEPT iptables -A FORWARD -j DROP I've tried each of these rules separately without luck (flushing the chains before executing): iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j SNAT --to 1.2.3.4 iptables -t nat -A POSTROUTING -s 10.8.0.0/24 -o eth0 -j MASQUERADE route -n before (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n after (server): 1.2.3.4 0.0.0.0 255.255.255.0 U 0 0 0 eth0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 0.0.0.0 1.2.3.4 0.0.0.0 UG 0 0 0 eth0 route -n before (client): 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 route -n after (client): 1.2.3.4 192.168.2.1 255.255.255.255 UGH 0 0 0 wlan0 10.8.0.0 0.0.0.0 255.255.255.0 U 0 0 0 tap0 192.168.2.0 0.0.0.0 255.255.255.0 U 2 0 0 wlan0 169.254.0.0 0.0.0.0 255.255.0.0 U 1000 0 0 wlan0 0.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 128.0.0.0 10.8.0.1 128.0.0.0 UG 0 0 0 tap0 0.0.0.0 192.168.2.1 0.0.0.0 UG 0 0 0 wlan0 SERVER config proto udp dev tap ca ca.crt cert server.crt key server.key dh dh1024.pem server 10.8.0.0 255.255.255.0 push "redirect-gateway def1" ifconfig-pool-persist ipp.txt keepalive 10 120 tls-auth ta.key 0 comp-lzo user nobody group nobody persist-key persist-tun log-append openvpn-log verb 3 mute 10 CLIENT config dev tap proto udp remote 1.2.3.4 1194 resolv-retry infinite nobind persist-key persist-tun ca ca.crt cert client.crt key client.key ns-cert-type server tls-auth ta.key 1 comp-lzo verb 3 mute 20 traceroute 8.8.8.8 works as expected (similar output without OpenVPN activated): 1 10.8.0.1 (10.8.0.1) 24.276 ms 26.891 ms 29.454 ms 2 gw03.sbp.directvps.nl (178.21.112.1) 31.161 ms 31.890 ms 34.458 ms 3 ge0-v0652.cr0.nik-ams.nl.as8312.net (195.210.57.105) 35.353 ms 36.874 ms 38.403 ms 4 ge0-v3900.cr0.nik-ams.nl.as8312.net (195.210.57.53) 41.311 ms 41.561 ms 43.006 ms 5 * * * 6 209.85.248.88 (209.85.248.88) 147.061 ms 36.931 ms 28.063 ms 7 216.239.49.36 (216.239.49.36) 31.109 ms 33.292 ms 216.239.49.28 (216.239.49.28) 64.723 ms 8 209.85.255.130 (209.85.255.130) 49.350 ms 209.85.255.126 (209.85.255.126) 49.619 ms 209.85.255.122 (209.85.255.122) 52.416 ms 9 google-public-dns-a.google.com (8.8.8.8) 41.266 ms 44.054 ms 44.730 ms If you have any suggestions, please comment or answer. Thanks in advance.

  Read the article

• php crashes with no core file and this message : apc_mmap failed

  - by greg0ire

  Description of the problem Regularly, cron php processes crash on our production server, which result in mails with the following body : PHP Fatal error: PHP Startup: apc_mmap: mmap failed: in Unknown on line 0 Segmentation fault (core dumped) I think the Segmentation fault (core dumped) should result in core files being handled by apport and then written in /var/crashes, but the files I can see there are there since yesterday, although the last crash occured today : -rw-r----- 1 root whoopsie 1138528 mai 22 04:09 _usr_bin_php5.0.crash -rw-r----- 1 frontoffice whoopsie 1166373 mai 20 18:00 _usr_bin_php5.1005.crash -rw-r----- 1 frontoffice whoopsie 81622658 mai 22 00:05 _usr_sbin_php5-fpm.1005.crash I tried to download the last one anyway, and ran gdb /usr/sbin/php5-fpm /tmp/_usr_sbin_php5-fpm.1005.crash, only to be told that the file is not a core file (its format was not recognized). Here is the server's apc configuration : cat /etc/php5/cli/conf.d/20-apc.ini extension=apc.so apc.shm_size=512M apc.ttl=3600 apc.user_ttl=3600 apc.enable_cli=1 I'm mostly worried about the apc.shm_size… isn't it too high or too low ? I understand it has to do with the size of memory segments. Question(s) What could be the problem ? How can I troubleshoot it (how can I get a valid core file ?) ? System information free total used free shared buffers cached Mem: 5081296 4354684 726612 0 374744 959968 -/+ buffers/cache: 3019972 2061324 Swap: 522236 516888 5348 cat /etc/lsb-release DISTRIB_ID=Ubuntu DISTRIB_RELEASE=12.04 DISTRIB_CODENAME=precise DISTRIB_DESCRIPTION="Ubuntu 12.04.2 LTS" php -v PHP 5.4.17-1~precise+1 (cli) (built: Jul 17 2013 18:14:06) Copyright (c) 1997-2013 The PHP Group Zend Engine v2.4.0, Copyright (c) 1998-2013 Zend Technologies php -i excerpt : Configuration apc APC Support => enabled Version => 3.1.13 APC Debugging => Disabled MMAP Support => Enabled MMAP File Mask => Locking type => pthread mutex Locks Serialization Support => php Revision => $Revision: 327136 $ Build Date => Nov 20 2012 18:41:36 Directive => Local Value => Master Value apc.cache_by_default => On => On apc.canonicalize => On => On apc.coredump_unmap => Off => Off apc.enable_cli => On => On apc.enabled => On => On apc.file_md5 => Off => Off apc.file_update_protection => 2 => 2 apc.filters => no value => no value apc.gc_ttl => 3600 => 3600 apc.include_once_override => Off => Off apc.lazy_classes => Off => Off apc.lazy_functions => Off => Off apc.max_file_size => 1M => 1M apc.mmap_file_mask => no value => no value apc.num_files_hint => 1000 => 1000 apc.preload_path => no value => no value apc.report_autofilter => Off => Off apc.rfc1867 => Off => Off apc.rfc1867_freq => 0 => 0 apc.rfc1867_name => APC_UPLOAD_PROGRESS => APC_UPLOAD_PROGRESS apc.rfc1867_prefix => upload_ => upload_ apc.rfc1867_ttl => 3600 => 3600 apc.serializer => default => default apc.shm_segments => 1 => 1 apc.shm_size => 512M => 512M apc.shm_strings_buffer => 4M => 4M apc.slam_defense => On => On apc.stat => On => On apc.stat_ctime => Off => Off apc.ttl => 3600 => 3600 apc.use_request_time => On => On apc.user_entries_hint => 4096 => 4096 apc.user_ttl => 3600 => 3600 apc.write_lock => On => On php -m [PHP Modules] apc bcmath bz2 calendar Core ctype curl date dba dom ereg exif fileinfo filter ftp gd gettext hash iconv imagick intl json ldap libxml mbstring memcache memcached mhash mysql mysqli openssl pcntl pcre PDO pdo_mysql pdo_pgsql pdo_sqlite pgsql Phar posix Reflection session shmop SimpleXML soap sockets SPL sqlite3 standard sysvmsg sysvsem sysvshm tidy tokenizer wddx xml xmlreader xmlwriter zip zlib [Zend Modules] ulimit -a core file size (blocks, -c) 0 data seg size (kbytes, -d) unlimited scheduling priority (-e) 0 file size (blocks, -f) unlimited pending signals (-i) 39531 max locked memory (kbytes, -l) 64 max memory size (kbytes, -m) unlimited open files (-n) 1024 pipe size (512 bytes, -p) 8 POSIX message queues (bytes, -q) 819200 real-time priority (-r) 0 stack size (kbytes, -s) 8192 cpu time (seconds, -t) unlimited max user processes (-u) 39531 virtual memory (kbytes, -v) unlimited file locks (-x) unlimited

  Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >