Search Results

Search found 41295 results on 1652 pages for 'right to left'.

Page 434/1652 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

• How To Quickly Reboot Directly from Windows 7 to XP, Vista, or Ubuntu

  - by The Geek

  One of the biggest annoyances with a dual-boot system is having to wait for your PC to reboot to select the operating system you want to switch to, but there’s a simple piece of software that can make this process easier. This guest article was written by Ryan Dozier from the Doztech tech blog. With a small piece of software called iReboot we can skip the above step all together and instantly reboot into the operating system we want right from Windows. Their description says: “Instead of pressing restart, waiting for Windows to shut down, waiting for your BIOS to post, then selecting the operating system you want to boot into (within the bootloader time-limit!); you just select that entry from iReboot and let it do the rest!” Don’t worry about iReboot reconfiguring  your bootloader or any dual boot configuration you have. iReboot will only boot the selected operating system once and go back to your default settings. Using iReboot iReboot is quick and easy to install. Just download it, link below, run through the setup and select the default configuration. iReboot will automatically figure out what operating systems you have installed and appear in the taskbar. Go over to the taskbar and right click on the iReboot icon and select which operating system you want to reboot into. This method will add a check mark on the operating system you want to boot into. On your next reboot the system will automatically load your choice and skip the Windows Boot Manager. If you want to reboot automatically just select “Reboot on Selection” in the iReboot menu.   To be even more productive, you can install iReboot into each Windows operating system to quickly access the others with a few simple clicks.   iReboot does not work in Linux so you will have to reboot manually. Then wait for the Windows Boot Manager to load and select your operating system.   Conclusion iReboot works on  Windows XP, Windows Vista,  and Windows 7 as well as 64 bit versions of these operating systems. Unfortunately iReboot is only available for Windows but you can still use its functionality in Windows to quickly boot up your Linux machine. A simple reboot in Linux will take you back to Windows Boot Manager. Download iReboot from neosmart.net Editor’s note: We’ve not personally tested this software over at How-To Geek, but Neosmart, the author of the software, generally makes quality stuff. Still, you might want to test it out on a test machine first. If you’ve got any experience with this software, please be sure to let your fellow readers know in the comments. Similar Articles Productive Geek Tips Restart the Ubuntu Gnome User Interface QuicklyKeyboard Ninja: 21 Keyboard Shortcut ArticlesTest Your Computer’s Memory Using Windows Vista Memory Diagnostic ToolEnable or Disable UAC From the Windows 7 / Vista Command LineSet Windows as Default OS when Dual Booting Ubuntu TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Home Networks – How do they look like & the problems they cause Check Your IMAP Mail Offline In Thunderbird Follow Finder Finds You Twitter Users To Follow Combine MP3 Files Easily QuicklyCode Provides Cheatsheets & Other Programming Stuff Download Free MP3s from Amazon

  Read the article

• Introducing Oracle System Assistant

  - by B.Koch

  by Josh Rosen One of the challenges with today's servers is getting the server up and running and understanding what all of the steps are once you plug the server in for the first time. So many different pieces come into play: installing drivers, updating firmware, configuring RAID, and provisioning the operating system. All of these steps must be done before you can even start using the server. Finding the latest firmware and drivers, making sure you have the right versions, and knowing that all the different software and firmware components work together properly can be a real challenge. If not done correctly, such as if you separately downloading disk firmware or controller firmware that doesn't match the existing OS drivers, you could experience bugs, performance problems, and incompatibilities. Gone are the days of having to locate the tools and drivers media that shipped with the server only to find out that newer versions of software and firmware are available on the web. Oracle has solved these challenges in the new X3-2 family of servers by introducing Oracle System Assistant. Oracle System Assistant is an innovative tool that is built-in to every new x86 server. It provides step-by-step assistance with configuring the server, updating firmware and drivers, and provisioning the operating system. Once you have completed all of the steps in the Oracle System Assistant tool, the server is ready to use. Oracle System Assistant was designed to be easy and straightforward. Starting it is as simple as pressing F9 when the server is booting. You'll need a keyboard, monitor, and mouse or you can use the remote console feature of Oracle ILOM (Integrated Lights Out Manager) to access a virtual KVM to the server from any machine. From there Oracle System Assistant will walk you through each of the steps necessary to set up your server. After configuring the network settings for Oracle System Assistant, the next step is to check for any new software or firmware for the server. Oracle System Assistant connects back to Oracle using your My Oracle Support account and downloads any updates that were made available to you for this specific server. This is where you really start to see the innovation that went into Oracle System Assistant. Firmware for Oracle ILOM and BIOS, operating system drivers, and other system firmware (including for option cards and disk drivers) come as a single bundle, downloading as a single unit, that has been engineered and tested to work together by Oracle. Oracle System Assistant figures out the right combination for your server, so you don't have to. Now that the server has the latest firmware, Oracle System Assistant will next walk you through configuring the hardware. From Oracle System Assistant, you can configure many Oracle ILOM settings, including the network settings and initial user accounts. This ensures that ILOM is accessible and ready to use. Oracle System Assistant is where all parts of the server come together. In addition to communicating with Oracle ILOM and interacting with BIOS, Oracle System Assistant understands and can configure the storage subsystem. Before installing the operating system, Oracle System Assistant can detect the storage configuration and configure RAID for all disks in the system. At this point, the server is ready to be provisioned with the host operating system. You can use Oracle System Assistant to provision a supported OS, including Oracle Linux, Oracle VM, RHEL, SuSe Linux, and Windows. And by using Oracle System Assistant, you can be sure that the proper OS drivers are installed for each of the installed hardware components. With Oracle System Assistant, initial setup of the server has never been easier. If we can innovate around problems and find solutions to make our servers easier to manage, this reduces IT costs and makes managing servers simpler. I think with Oracle System Assistant we have done just that. Josh Rosen is a Principal Product Manager at Oracle and previously spent more than a decade as a developer and architect of system management software. Josh has worked on system management for many of Oracle's hardware products ranging from the earliest blade systems to the latest Oracle x86 servers.

  Read the article

• Integrating JavaFX Scene Builder in the IDEs

  - by Jerome Cambon

  I experienced recently using Scene Builder from Netbeans, Eclipse and IntelliJ IDEA. As you may know, Scene Builder is a standalone tool, that can be used independently of any IDE. But it can be very convenient to use it with your favorite IDE, for instance start it by double-clicking on an FXML file, or run samples delivered with Scene Builder.  I'm sharing here with you few tweaks that I had to do for a better integration. Scene Builder 1.1 Developer Preview should be installed before doing the tweaks. The steps below have been done on Windows 7. It should be very similar on both Mac OS and Linux. Please tell me if you find any issue on one of these 2 platforms. Netbeans 7.3 Netbeans 7.3 can be downloaded from here. Creating a New FXML project Part of the JavaFx projects, Netbeans allows to create a 'JavaFX FXML Application', that creates a JavaFx project based on FXML description. The FXML file will be editable with Scene Builder. Starting Scene Builder from Netbeans If SceneBuilder 1.1 is installed, Netbeans will discover it automatically.In case of issue, one can open the Options panel, Java section, JavaFx tab. Scene Builder home should appear here. You can then either Open the FXML file with Scene Builder, or edit it with the Netbeans FXML editor : When 'Open' is selected, Scene Builder appears on top of the Netbeans window : When 'Edit' is selected, the FXML is opened in the Netbeans FXML editor, which support syntax highlighting and completion : Using Scene Builder Samples Scene Builder provides Netbeans projects, that can be opened/run directly : Eclipse 4.2.1 + e(fx)clipse 0.1.1 JavaFX integration in Eclipse has been done with the e(fx)clipse plugin. A distribution bundle containing Eclipse and e(fx)clipse is provided here. Creating New FXML project All the JavaFX-related projects can be found in 'Other' section : First create a new JavaFX project: Enter the project name (Test here). JavaFX delivery will be found in the JRE. Then, create a 'New FXML Document': Enter the FXML file name (Sample here). You may also want to choose the FXML document root element (AnchorPane by default). Dynamic root is for advanced users which want to manage custom types. Starting Scene Builder from Eclipse Once created, you can then either Open the FXML file with Scene Builder, or Open it in the Eclipse FXML editor : Using Scene Builder Samples from Eclipse To use Scene Builder samples, first create a new JavaFX Project (from 'Other' section): Then, on the next panel, 'Link additionnal source': … and select the source directory of a Scene Builder example : HelloWorld here (the parent directory of the java package should be selected).Then, choose a 'Folder name' for your sample: You can now run the Scene Builder example by right-clicking the Main.java source file: IntelliJ IDEA 11.1.3 IntelliJ IDEA Community Edition can be downloaded from here. IntelliJ IDEA has no specific JavaFX integration. Creating New IntelliJ project from existing source Since IntelliJ has no JavaFX project knowledge, we are using the Scene Builder samples as a starting point. We are going to create a new Java project from the HelloWorld sample: Then, click twice on 'Next' (nothing to change), then 'Finish'. The 'HelloWorld' project is created. Starting Scene Builder from IntelliJ We need to tell the IDE that FXML files are opened with an external application. Then, the OS file association will be used. To do this, open the File->Settings panel. Then, select 'File Types' and 'Files opened in associated applications'. And add a new wildcard : '*.fxml' : Now, from the HelloWorld project, you can double-click on HelloWorld.fxml : Scene Builder window appears on top of the IntelliJ window : Using Scene Builder Samples from IntelliJ We need to tell IntelliJ that the fxml files must be copied in the build directory.To do that, from the HelloWorld directory, open the 'idea' section, and edit the 'compiler.xml' file. We need to add an '*.fxml' entry: Then, you can run the sample from HelloWorld project, by right-clicking the Main class:

  Read the article

• Brainless Backups

  - by Jesse

  I’m a software developer by trade which means to my friends and family I’m just a “computer guy”. It’s assumed that I know everything about every facet of computing from removing spyware to replacing hardware. I also can do all of this blindly over the phone or after hearing a five to ten word description of the problem over dinner ;-) In my position as CIO of my friends and families I’ve been in the unfortunate position of trying to recover music, pictures, or documents off of failed hard drives on more than one occasion. It’s not a great situation for anyone, and it’s always at these times that the importance of backups becomes so clear. Several months back a friend of mine found himself in this situation. The hard drive on his 8 year old laptop failed and took a good number of his digital photos with it. I think most folks can deal with losing some of their music and even some of their documents, but it really stings to lose pictures of past events and loved ones. After ordering a new laptop, my friend went out and bought an external hard drive so that he could start keeping a backup of his data. As fate would have it, several months later the drive in his new laptop failed and he learned the hard way that simply buying the external hard drive isn’t enough… you actually have to copy your stuff over every once in awhile! The importance of backup and recovery plans is (hopefully) well known in IT organizations. Well executed backup plans are in place, and hopefully the backup and recovery process is tested regularly. When you’re talking about users at home, however, the need for these backups is often understood far too late. Most typical users can’t be expected to remember to backup their data regularly and also don’t always have the know-how to setup automated backups. For my friends and family members in this situation I recommend tools like Dropbox, Carbonite, and Mozy. Here’s why I like them: They’re affordable: Dropbox and Mozy both have free offerings, though most people with lots of music and/or photos to backup will probably exceed the storage limitations of those free plans pretty quickly. Still, all three offer pretty affordable monthly or yearly plans. In my opinion, Carbonite’s unlimited storage plan for $50-$60 per year is the best value around. They’re easy to setup: Both Dropbox and Carbonite are very easy to get setup and start using. I’ve never used Mozy, but I imagine it’s similarly painless to get up and running. Backups are automatically “off-site”: A backup that is sitting on an external hard drive right next to your computer is great, but might not protect against flood damage, a power surge, or other disasters in that single location. These services exist “in the cloud” so to speak, helping mitigate those concerns. Granted, this kind of backup scheme requires some trust in the 3rd party to protect your data from both malicious people and disastrous events. This truly is a bit of a double edged sword, but I sleep well at night knowing that my data is being backed up and secured by a company made up of engineers that focus on the business of doing backups right. Backups are “brainless”: What I like most about services like these is that they work “automagically” in the background, watching for files to be updated and automatically backing up those changes. There’s no need to remember to plug in that external drive and copy your data over. Since starting to recommend these services to my friends and family I find myself wearing my “data recovery” hat far less often. The only way backups are effective for your standard computer user is if they’re completely automatic. Backups need to be brainless, or they just won’t work.

  Read the article

• Dual boot Ubuntu and Windows 7, I Can only boot ubuntu through recovery mode

  - by Alec

  I want to become a new user of Ubuntu, however this problem is preventing me. I have/had Window 7 professional on my computer. I recently looked into getting linux. I discovered dual-booting and decided to give it a try. First I created a bootable flash drive with ubuntu 12.10 64 bit. I then followed the instructions on: https://help.ubuntu.com/community/WindowsDualBoot after I finished going through the setup, my computer rebooted. After the reboot I was able to select Ubuntu, advanced options for Ubuntu, 2 memory tests, and windows 7 (loader). So I chose Windows ( honestly i was more concerned that i still had everything on windows at this point). I then rebooted again and selected Ubuntu. When i selected Ubuntu, the background screen of Grub (the crimson/burgandy color) stayed for a few seconds then the screen went black: video here http://www.youtube.com/watch?v=6kKcG4sT7Lg&feature=plcp I tried again with the same results. so i redid the ubuntu install differently using http://www.liberiangeek.net/2012/10/dual-booting-windows-7-and-ubuntu-12-10-quantal-quetzal/. After rebooting the same thing happened. After that i was stumped, so i figured it could hurt to experiment. after all i backed up my windows 7 stuff, and i have the software disk. I tried booting in recovery mode under "advanced options for Ubuntu" and sure enough, after selecting continue to normal reboot it worked. So i updated and everything but when i rebooted it still wouldn't boot under Ubuntu. It would always boot after recovery mode. So i try installing 12.10 32 bit Ubuntu. the same problem keeps happening. I can still get to Ubuntu through recovery mode. so i went online and tried using the terminal (in ubuntu that i booted through recovery mode) when i was using it i discovered that "Error in sitecustomize; set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected" kept showing up. also i noticed a notification in the top right corner that looked like a do not enter sign. it said "an error occured, please run package manager from the right-click menu or apt-get in a terminal to see what is wrong. the error message was: 'ror in sitecustomize;set PYTHONVERBOSE for traceback: EOFError: EOF read where not expected traceback (most recent called last): File "/usr/bin/lsb_release EOFError: EOF read where not expected 39;0' this usually means that your installed packages have unmet dependencies" Naturally i assumed this was what was causing my boot problems. I downloaded synaptic and updated everything and the error went away. but my boot problem was still a problem. so i go online find some things that have worked for others, like this Try to do this (in your terminal: sudo nano /etc/default/grub Look for: GRUB_CMDLINE_LINUX_DEFAULT="quiet splash" Change it too : GRUB_CMDLINE_LINUX_DEFAULT="quiet" And update Grub: sudo update-grub This should fix stuff.) I did this and i still have the problem. sorry for the excessive explanation, please help.

  Read the article

• Cox Communications' Strategic Approach to Enterprise User Experience: How Change Management and Usab

  - by Applications User Experience

  Author: Anna Wichansky, Senior Director, Applications User Experience, and Chair, Oracle Usability Advisory Board As part of our work in the User Experience group, our teams often go to Customer events such as the Higher Education User Group (HEUG) conference, Alliance 2010. This year's event was held in San Antonio, Texas, and was attended by hundreds of higher education, government, and public sector users of Oracle applications. The User Assistance team used this opportunity to reach out to customers in the Educational and Government sectors to better understand how their organizations are currently approaching help, messages, and other forms of user assistance. What is User Assistance? For us, user assistance is more than the old books of users' manuals and documentation. User assistance is anything that helps users get their jobs done quickly and efficiently. Instead of expecting users to stop and look through a guide or manual, we have been developing solutions that are embedded within the interface. We know that when people are having difficulty with a task, they want to be able to search efficiently for solutions and collaborate with coworkers. We know that they want to find their answers right there, right then, so that they can get on with their work. In our interviews at Alliance, we wanted to learn what the participants could tell us about what was happening on their campuses and in their institutions. Figure 1. For Oracle User Assistance, it's not just about books any more. So what did we do? Off to Texas, we recruited 10 people from nine different government and education organizations to come to our Oracle User Experience Onsite Usability Labs. We conducted one-hour interviews with these folks and asked them all about User Assistance--what people are doing, what they would like to do, what technologies they are using, what they would like to use, and ultimately what should we as a company be planning for our future products. We used this as an opportunity also to show them some of our design concepts for Fusion User Assistance, our next generation of user assistance based on the best of our user assistance in other products. Figure 2. Interviewing a technical user at Alliance. What we learned... People are not using paper or online manuals anymore. They don't want to see a manual that is written for technical users and that doesn't make sense to the ordinary end user. They really don't want to have to flip through a manual trying to find an answer to their question. Even when the answer might be tailored to their organization, they don't want to dig through documentation. When they need an answer now, they don't have the patience to dig for something that might or might not be clearly written. What does it mean to an organization when users don't want to deal with documentation? In many cases, it means that frustrated users make phone calls to try to find the answers that they need immediately. Phone calls are expensive to an organization and frustrating to the technical support staff who have provided documentation that no one wants to read anymore. If they don't call, they email for help often, and many users are asking for the same information. The bottom line is that if they could get that help immediately in the interface, they wouldn't have to make those calls or send those emails -- and that saves time and money. Our Fusion User Assistance options to customize help and get help for the task immediately were seen as an opportunity by these technical users to build the solutions that their users need and want. Figure 3. Joyce Ohgi and Laurie Pattison of Applications UX. Chicken Fried Steak. That was huge. But then, this was Texas, where we discovered a lot of things come very big. Drinks are served in quart-size glasses and dishes like Chicken Fried Steaks are served on platters not plates. We saw three-pound cinnamon rolls that you down with tea sweet enough to curl your hair. Deep in the heart of Texas, we learned a lot, and we ate even more.

  Read the article

• Merge sort versus quick sort performance

  - by Giorgio

  I have implemented merge sort and quick sort using C (GCC 4.4.3 on Ubuntu 10.04 running on a 4 GB RAM laptop with an Intel DUO CPU at 2GHz) and I wanted to compare the performance of the two algorithms. The prototypes of the sorting functions are: void merge_sort(const char **lines, int start, int end); void quick_sort(const char **lines, int start, int end); i.e. both take an array of pointers to strings and sort the elements with index i : start <= i <= end. I have produced some files containing random strings with length on average 4.5 characters. The test files range from 100 lines to 10000000 lines. I was a bit surprised by the results because, even though I know that merge sort has complexity O(n log(n)) while quick sort is O(n^2), I have often read that on average quick sort should be as fast as merge sort. However, my results are the following. Up to 10000 strings, both algorithms perform equally well. For 10000 strings, both require about 0.007 seconds. For 100000 strings, merge sort is slightly faster with 0.095 s against 0.121 s. For 1000000 strings merge sort takes 1.287 s against 5.233 s of quick sort. For 5000000 strings merge sort takes 7.582 s against 118.240 s of quick sort. For 10000000 strings merge sort takes 16.305 s against 1202.918 s of quick sort. So my question is: are my results as expected, meaning that quick sort is comparable in speed to merge sort for small inputs but, as the size of the input data grows, the fact that its complexity is quadratic will become evident? Here is a sketch of what I did. In the merge sort implementation, the partitioning consists in calling merge sort recursively, i.e. merge_sort(lines, start, (start + end) / 2); merge_sort(lines, 1 + (start + end) / 2, end); Merging of the two sorted sub-array is performed by reading the data from the array lines and writing it to a global temporary array of pointers (this global array is allocate only once). After each merge the pointers are copied back to the original array. So the strings are stored once but I need twice as much memory for the pointers. For quick sort, the partition function chooses the last element of the array to sort as the pivot and scans the previous elements in one loop. After it has produced a partition of the type start ... {elements <= pivot} ... pivotIndex ... {elements > pivot} ... end it calls itself recursively: quick_sort(lines, start, pivotIndex - 1); quick_sort(lines, pivotIndex + 1, end); Note that this quick sort implementation sorts the array in-place and does not require additional memory, therefore it is more memory efficient than the merge sort implementation. So my question is: is there a better way to implement quick sort that is worthwhile trying out? If I improve the quick sort implementation and perform more tests on different data sets (computing the average of the running times on different data sets) can I expect a better performance of quick sort wrt merge sort? EDIT Thank you for your answers. My implementation is in-place and is based on the pseudo-code I have found on wikipedia in Section In-place version: function partition(array, 'left', 'right', 'pivotIndex') where I choose the last element in the range to be sorted as a pivot, i.e. pivotIndex := right. I have checked the code over and over again and it seems correct to me. In order to rule out the case that I am using the wrong implementation I have uploaded the source code on github (in case you would like to take a look at it). Your answers seem to suggest that I am using the wrong test data. I will look into it and try out different test data sets. I will report as soon as I have some results.

  Read the article

• Healthcare and Distributed Data Don't Mix

  - by [email protected]

  How many times have you heard the story?  Hard disk goes missing, USB thumb drive goes missing, laptop goes missing...Not a week goes by that we don't hear about our data going missing...  Healthcare data is a big one, but we hear about credit card data, pricing info, corporate intellectual property...  When I have spoken at Security and IT conferences part of my message is "Why do you give your users data to lose in the first place?"  I don't suggest they can't have access to it...in fact I work for the company that provides the premiere data security and desktop solutions that DO provide access.  Access isn't the issue.  'Keeping the data' is the issue.We are all human - we all make mistakes... I fault no one for having their car stolen or that they dropped a USB thumb drive. (well, except the thieves - I can certainly find some fault there)  Where I find fault is in policy (or lack thereof sometimes) that allows users to carry around private, and important, data with them.  Mr. Director of IT - It is your fault, not theirs.  Ms. CSO - Look in the mirror.It isn't like one can't find a network to access the data from.  You are on a network right now.  How many Wireless ones (wifi, mifi, cellular...) are there around you, right now?  Allowing employees to remove data from the confines of (wait for it... ) THE DATA CENTER is just plain indefensible when it isn't required.  The argument that the laptop had a password and the hard disk was encrypted is ridiculous.  An encrypted drive tells thieves that before they sell the stolen unit for $75, they should crack the encryption and ascertain what the REAL value of the laptop is... credit card info, Identity info, pricing lists, banking transactions... a veritable treasure trove of info people give away on an 'encrypted disk'.What started this latest rant on lack of data control was an article in Government Health IT that was forwarded to me by Denny Olson, an Oracle Principal Sales Consultant in Minnesota.  The full article is here, but the point was that a couple laptops went missing in a couple different cases, and.. well... no one knows where the data is, and yes - they were loaded with patient info.  What were you thinking?Obviously you can't steal data form a Sun Ray appliance... since it has no data, nor any storage to keep the data on, and Secure Global Desktop allows access from Macs, Linux and Windows client devices...  but in all cases, there is no keeping the data unless you explicitly allow for it in your policy.   Since you can get at the data securely from any network, why would you want to take personal responsibility for it?  Both Sun Rays and Secure Global Desktop are widely used in Healthcare... but clearly not widely enough.We need to do a better job of getting the message out -  Healthcare (or insert your business type here) and distributed data don't mix. Then add Hot Desking and 'follow me printing' and you have something that Clinicians (and CSOs) love.Thanks for putting up my blood pressure, Denny.

  Read the article

• InfiniBand Enabled Diskless PXE Boot

  - by Neeraj Gupta

  When you want to bring up a compute server in your environment and need InfiniBand connectivity, usually you go through various installation steps. This could involve operating systems like Linux, followed by a compatible InfiniBand software distribution, associated dependencies and configurations. What if you just want to run some InfiniBand diagnostics or troubleshooting tools from a test machine ? What if something happened to your primary machine and while recovering in rescue mode, you also need access to your InfiniBand network ? Often times we use opensource community supported small Linux distributions but they don't come with required InfiniBand support and tools. In this weblog, I am going to provide instructions on how to add InfniBand support to a specific Linux image - Parted Magic.This is a free to use opensource Linux distro often used to recover or rescue machines. The distribution itself will not be changed at all. Yes, you heard it right ! I have built an InfiniBand Add-on package that will be passed to the default kernel and initrd to get this all working. Pr-requisites You will need to have have a PXE server ready on your ethernet based network. The compute server you are trying to PXE boot should have a compatible IB HCA and must be connected to an active IB network. Required Downloads Download the Parted Magic small distribution for PXE from Parted Magic website. Download InfiniBand PXE Add On package. Right Click and Download from here. Do not extract contents of this file. You need to use it as is. Prepare PXE Server Extract the contents of downloaded pmagic distribution into a temporary directory. Inside the directory structure, you will see pmagic directory containing two files - bzImage and initrd.img. Copy this directory in your TFTP server's root directory. This is usually /tftpboot unless you have a different setup. For Example: cp pmagic_pxe_2012_2_27_x86_64.zip /tmp cd /tmp unzip pmagic_pxe_2012_2_27_x86_64.zip cd pmagic_pxe_2012_2_27_x86_64 # ls -l total 12 drwxr-xr-x  3 root root 4096 Feb 27 15:48 boot drwxr-xr-x  2 root root 4096 Mar 17 22:19 pmagic cp -r pmagic /tftpboot As I mentioned earlier, we dont change anything to the default pmagic distro. Simply provide the add-on package via PXE append options. If you are using a menu based PXE server, then add an entry to your menu. For example /tftpboot/pxelinux.cfg/default can be appended with following section. LABEL Diskless Boot With InfiniBand Support MENU LABEL Diskless Boot With InfiniBand Support KERNEL pmagic/bzImage APPEND initrd=pmagic/initrd.img,pmagic/ib-pxe-addon.cgz edd=off load_ramdisk=1 prompt_ramdisk=0 rw vga=normal loglevel=9 max_loop=256 TEXT HELP * A Linux Image which can be used to PXE Boot w/ IB tools ENDTEXT Note: Keep the line starting with "APPEND" as a single line. If you use host specific files in pxelinux.cfg, then you can use that specific file to add the above mentioned entry. Boot Computer over PXE Now boot your desired compute machine over PXE. This does not have to be over InfiniBand. Just use your standard ethernet interface and network. If using menus, then pick the new entry that you created in previous section. Enable IPoIB After a few minutes, you will be booted into Parted Magic environment. Open a terminal session and see if InfiniBand is enabled. You can use commands like: ifconfig -a ibstat ibv_devices ibv_devinfo If you are connected to InfiniBand network with an active Subnet Manager, then your IB interfaces must have come online by now. You can proceed and assign IP address to them. This will enable you at IPoIB layer. Example InfiniBand Diagnostic Tools I have added several InfiniBand Diagnistic tools in this add-on. You can use from following list: ibstat, ibstatus, ibv_devinfo, ibv_devices perfquery, smpquery ibnetdiscover, iblinkinfo.pl ibhosts, ibswitches, ibnodes Wrap Up This concludes this weblog. Here we saw how to bring up a computer with IPoIB and InfiniBand diagnostic tools without installing anything on it. Its almost like running diskless !

  Read the article

• How to set default xrandr settings?

  - by echo-flow

  I'm trying to enable dual monitors in Ubuntu. This is working fine, but every time I do it, desktop effects is disabled. I think I've found the reason why, though: https://wiki.ubuntu.com/X/Config/Multihead/ As with the GNOME XRandR configuration method, setting Virtual to too large a value may result in a loss of hardware acceleration, and thus an inability to use Compiz and its desktop effects. When I use the GNOME monitor applet, or the Monitors configuration in the System menu, the default xrandr settings puts the second monitor to the right of the first, and, as I found with this bug, for most monitors this creates a virtual desktop larger than the maximum 2048 horizontal resolution needed for hardware acceleration on my netbook hardware. So, it seems like if I can modify xrandr's default settings so that it places the new desktop above or below (north or south of) the main LVDS display, then hardware acceleration, and therefore compiz will continue to work. Can anyone tell me, what is the easiest way to achieve this? UPDATE: I have confirmed that multihead support with desktop effects and hardware acceleration works when I move the external monitor display north of the main LVDS display. Right now this involves the following process: plugging in the external monitor, starting the Monitors configuration menu, desktop effects are disabled automatically (and all of the windows on my workspaces are moved to the first workspace), repositioning the external display so that it is north of LVDS display and clicking apply, and then navigating to the Appearance menu and telling it to reenable desktop effects. Is there a simpler way do this? UPDATE 2: OK, so I thought that perhaps the GNOME Monitors configuration screen was trying to be clever, and might be disbling desktop effects. So, I just tried using the xrandr command-line client instead, as follows: xrandr --output VGA1 --above LVDS1 When I do that, desktop effects are still disabled, and I need to manually reenable them. This, despite the fact that hardware acceleration works, and there is never a point where hardware acceleration stops working because the horizontal dimension of the virtual display is too large. So what program is trying to be clever, and is turning off desktop effects when it doesn't need to? And how do I make it stop? If there were a way to re-enable desktop effects from the command line, which I could then put into a script along with the proper xrandr invocation, I would accept that as a workaround. UPDATE 3: OK, here's my script to enable a second monitor with desktop effects. It might be evil, I'm not sure: second-monitor.sh xrandr --output VGA1 --above LVDS1 sleep 3 compiz --replace & The sleep statement might not be necessary. If there's a better way to do this, please let me know. UPDATE 4: This is a Dell Mini Inspiron 1012. Here are my system specifications: lspci -vv 00:02.0 VGA compatible controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx+ Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Interrupt: pin A routed to IRQ 29 Region 0: Memory at f0b00000 (32-bit, non-prefetchable) [size=512K] Region 1: I/O ports at 18d0 [size=8] Region 2: Memory at d0000000 (32-bit, prefetchable) [size=256M] Region 3: Memory at f0900000 (32-bit, non-prefetchable) [size=1M] Capabilities: <access denied> Kernel driver in use: i915 Kernel modules: i915 00:02.1 Display controller: Intel Corporation N10 Family Integrated Graphics Controller Subsystem: Dell Device 041a Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx- Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast >TAbort- <TAbort- <MAbort- >SERR- <PERR- INTx- Latency: 0 Region 0: Memory at f0b80000 (32-bit, non-prefetchable) [size=512K] Capabilities: <access denied> lsmod | grep i915 i915 287458 2 drm_kms_helper 29329 1 i915 drm 162409 3 i915,drm_kms_helper intel_agp 24375 2 i915 i2c_algo_bit 5028 1 i915 video 17375 1 i915

  Read the article

• Monitor and Control Memory Usage in Google Chrome

  - by Asian Angel

  Do you want to know just how much memory Google Chrome and any installed extensions are using at a given moment? With just a few clicks you can see just what is going on under the hood of your browser. How Much Memory are the Extensions Using? Here is our test browser with a new tab and the Extensions Page open, five enabled extensions, and one disabled at the moment. You can access Chrome’s Task Manager using the Page Menu, going to Developer, and selecting Task manager… Or by right clicking on the Tab Bar and selecting Task manager. There is also a keyboard shortcut (Shift + Esc) available for the “keyboard ninjas”. Sitting idle as shown above here are the stats for our test browser. All of the extensions are sitting there eating memory even though some of them are not available/active for use on our new tab and Extensions Page. Not so good… If the default layout is not to your liking then you can easily modify the information that is available by right clicking and adding/removing extra columns as desired. For our example we added Shared Memory & Private Memory. Using the about:memory Page to View Memory Usage Want even more detail? Type about:memory into the Address Bar and press Enter. Note: You can also access this page by clicking on the Stats for nerds Link in the lower left corner of the Task Manager Window. Focusing on the four distinct areas you can see the exact version of Chrome that is currently installed on your system… View the Memory & Virtual Memory statistics for Chrome… Note: If you have other browsers running at the same time you can view statistics for them here too. See a list of the Processes currently running… And the Memory & Virtual Memory statistics for those processes. The Difference with the Extensions Disabled Just for fun we decided to disable all of the extension in our test browser… The Task Manager Window is looking rather empty now but the memory consumption has definitely seen an improvement. Comparing Memory Usage for Two Extensions with Similar Functions For our next step we decided to compare the memory usage for two extensions with similar functionality. This can be helpful if you are wanting to keep memory consumption trimmed down as much as possible when deciding between similar extensions. First up was Speed Dial”(see our review here). The stats for Speed Dial…quite a change from what was shown above (~3,000 – 6,000 K). Next up was Incredible StartPage (see our review here). Surprisingly both were nearly identical in the amount of memory being used. Purging Memory Perhaps you like the idea of being able to “purge” some of that excess memory consumption. With a simple command switch modification to Chrome’s shortcut(s) you can add a Purge Memory Button to the Task Manager Window as shown below.  Notice the amount of memory being consumed at the moment… Note: The tutorial for adding the command switch can be found here. One quick click and there is a noticeable drop in memory consumption. Conclusion We hope that our examples here will prove useful to you in managing the memory consumption in your own Google Chrome installation. If you have a computer with limited resources every little bit definitely helps out. Similar Articles Productive Geek Tips Stupid Geek Tricks: Compare Your Browser’s Memory Usage with Google ChromeMonitor CPU, Memory, and Disk IO In Windows 7 with Taskbar MetersFix for Firefox memory leak on WindowsHow to Purge Memory in Google ChromeHow to Make Google Chrome Your Default Browser TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips Acronis Online Backup DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows iFixit Offers Gadget Repair Manuals Online Vista style sidebar for Windows 7 Create Nice Charts With These Web Based Tools Track Daily Goals With 42Goals Video Toolbox is a Superb Online Video Editor Fun with 47 charts and graphs

  Read the article

• Surface V2.0

  - by Dennis Vroegop

  It’s been quiet around here. And the reason for that is that it’s been quiet around Surface for a while. Now, a lot of people assume that when a product team isn’t making too much noise that must mean they stopped working on their product. Remember the PDC keynote in 2010? Just because they didn’t mention WPF there a lot of people had the idea that WPF was dead and abandoned for Silverlight. Of course, this couldn’t be farther from the truth. The same applies to Surface. While we didn’t hear much from the team in Redmond they were busy putting together the next version of the platform. And at the CES in January the world saw what they have been up to all along: Surface V2.0 as it’s commonly known. Of course, the product is still in development. It’s not here yet, we can’t buy one yet. However, more and more information comes available and I think this is a good time to share with you what it’s all about! The biggest change from an organizational point of view is that Microsoft decided to stop producing the hardware themselves. Instead, they have formed a partnership with Samsung who will manufacture the devices. This means that you as a buyer get the benefits of a large, worldwide supplier with all the services they can offer. Not that Microsoft didn’t do that before but since Surface wasn’t a ‘big’ product it was sometimes hard to get to the right people. The new device is officially called the “Samsung SUR 40 for Microsoft Surface” which is quite a mouthful. The software that runs the device is of course still coming from Microsoft. Let’s dive into the technical specs (note: all of this is preliminary, it’s still in the Alpha phase!): Audio out HDMI / StereoRCA / SPDIF / 2 times 3.5mm audio out jack Brightness 300 CD/m2 Communications 1GB Ethernet/802.11/Bluetooth Contrast Ratio 1:1000 CPU AMD Athlon X2 245e 2.9Ghz Dual Core Display Resolution Full HD 1080p 1920x1080 / 16:9 aspect ratio GPU AMD Radeon HD 6750 1GB GDDRS HDD 320 GB / 7200 RPM HDMI In / HDMI out Yes I/O Ports 4 USB, SD Card reader Operation System Embedded Windows 7 Professional 64 bits Panel Size 40” diagonal Protection Glass Gorilla Glass RAM 4 GB DD3 Weight / with standard legs 70.0 Kg / 154 lbs Weight / standalone 39.5 Kg / 87 lbs Height (without legs) 4 inch Contact points recognized > 50 Cool Factor Extremely   Ok, the last point is not official, but I do think it needs to be there. Let’s talk software. As noted, it runs Windows 7 Professional 64 bit, which means you can run Visual Studio 2010 on it. The software is going to be developed in WPF4.0 with the additional Surface SDK 2.0. It will contain all the things you’ve seen before plus some extra’s. They have taken some steps to align it more with the Surface Toolkit which you can download today, so if you do things right your software should be portable between a WPF4.0 Windows 7 Multi-touch app and the Surface v2 environment. It still uses infrared to detect contacts, so in that respect nothing much has changed conceptually. We still can differentiate between a finger, a tag or a blob. Of course, since the new platform has a much higher resolution (compared to the 1024x768 of the first version) you might need to look at your code again. I’ve seen a lot of applications on Surface that assume the old resolution and moving that to V2 is going to be some work. To be honest: as I am under NDA I cannot disclose much about the new software besides what I have told you here, but trust me: it’s going to blow people away. Now, the biggest question for me is: when can I get one? Until we can, have a look here: Tags van Technorati: surface,samsung,WPF

  Read the article

• Ubuntu 12.04 / 12.10 Randomly Freezing - nVidia?

  - by Alix Axel

  My Ubuntu install frequently freezes, sometimes showing a black screen (not very common anymore - in my latest installs), some other times the mouse and keyboard just fail to move and respond (not even Ctrl + Alt + F1 works) and some other times I'm able to move the mouse with a huge delay (2-5 seconds) but I'm not able to do/click anything. I have a pretty strong feeling that this problem is related to my graphic card drivers because: after hard reset, I usually get error reports about X.org / jockey it's common for artifacts to appear during loading / shutdown / whenever, for instance: pattern filled with £ during log off ugly-colored squared pattern during boot windows that are partially moved (i.e.: only the top half) Firefox renderings that leave the bottom ~30% of the page black These artifacts appear right before the system freezes. I've installed Ubuntu 12.04 LTS and after several failed attempts to get my dual monitor setup to work properly I tried installing the new 12.10 version, hoping that this new version would have this problem solved... Unfortunatly, that was not the case, so I reverted to Ubuntu 12.04. I've tried all the drivers in the Additional Drivers application (even the experimental ones), I've also tried the nvidia-current package from the PPA repository ubuntu-x-swat/x-updates as well as the nouveau OSS driver. Nothing (except no driver at all with a 640*480 resolution) at all seems stable. Here is the info of my graphic card: alix@alix-E500:~$ lspci | grep VGA 01:00.0 VGA compatible controller: NVIDIA Corporation G86 [GeForce 8400M G] (rev a1) alix@alix-E500:~$ sudo lshw -C video [sudo] password for alix: *-display description: VGA compatible controller product: G86 [GeForce 8400M G] vendor: NVIDIA Corporation physical id: 0 bus info: pci@0000:01:00.0 version: a1 width: 64 bits clock: 33MHz capabilities: pm msi pciexpress vga_controller bus_master cap_list rom configuration: driver=nouveau latency=0 resources: irq:16 memory:fd000000-fdffffff memory:d0000000-dfffffff memory:fa000000-fbffffff ioport:cc00(size=128) memory:fe0e0000-fe0fffff Right now, I don't even have my 22" monitor connected as I can't even get my laptop display to work properly and without freezes. I've searched, read and tried all that I could (over several fresh reinstalls) to fix the problem, but so far, no solution has proven definitive. I'm sorry I can't precise which symptom maps to each driver but I've been trying to solve this one on my own without logging what I'm doing, perhaps someone here will be able to point me to a certain-fix solution, if not I'll keep updating this question as I go along. Please let me know if any more info is needed to pinpoint the exact problem. Trying out NVIDIA accelerated graphics driver (version 173). The scrolling, minimizing / maximizing windows takes between 2 and 5 seconds to finalize. Context menus also pop up very slowly and the typing seems delayed by ~1 second. No critical issues so far. Firefox rendering of the Save Edits button is consistently messed up (random black lines in the top). Trying out NVIDIA accelerated graphics driver (version current) [Recommended]. All the delays mentioned above and the buggy rendering of the Save Edits button are gone, but I'm noticing that the whole screen flashes black for a couple of microseconds and while I was writing this test for the first time, the bottom 30% of the screen went black and I couldn't do anything (not even Ctrl + Alt + F1 would work). Had to force a hard reset. Also, the system hanged a little for a couple of seconds with the fade out of the "Restart" menu. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-304). Same symptoms as before, it crashed once while I was trying to install Chromium and again after a hard reset when I was trying to remove the driver. The bottom of the screen did not went black and I could move my mouse both times. Ctrl + Alt + F1 didn't work. The ugly-colored pattern also showed up during the second boot. Trying out NVIDIA accelerated graphics driver (*experimental*beta) (version experimental-307). The system crashed as soon as I clicked something. Had to do a fresh re-install. Trying out Nouveau: Accelerated Open Source driver for nVidia cards. Artifacts still show up during boot but other than that this one seems stable. As soon as I connected my second monitor, the responsiveness dropped a lot, animations and video are somewhat slow. I'm gonna try this solution http://askubuntu.com/a/98871/9018 later on.

  Read the article

• Installing Eclipse for OSB Development

  - by James Taylor

  OSB provides 2 methods for OSB development, the OSB console, and Eclipse. This post deals with a typical development environment with OSB installed on a remote server and the developer requiring an IDE on their PC for development. As at 11.1.1.4 Eclipse is only IDE supported for OSB development. We are hoping OSB will support JDeveloper in the future. To get the download for Eclipse use the download WebLogic Server with the Oracle Enterprise Pack for Eclipse, e.g. wls1034_oepe111161_win32.exe.To ensure the Eclipse version is compatible with your OSB version I recommend using the Eclipse that comes with the supported WLS server, e.g. OSB 11.1.1.4 you would install WLS 10.3.4+oepe.The install is a 2 step process, install the base Eclipse, then install the OSB plugins. In this example I'm using the 11.1.1.4 install for windows, your versions may differ. You need to download 2 programs, WebLogic Server with the oepe plugin for your OS, and the Oracle Service Bus which is generally generic. Place these files in a directory of your choice. Start the executable I create a new Oracle Home for this installation as it don't want to impact on my JDeveloper install or any other Oracle products installed on my machine. Ignore the support / email notifications Choose a custom install as we only want to install the minimum for Eclipse. If you really want you can do a typical and install everything. Deselect all products then select the Oracle Enterprise Pack for Eclipse. This will select the minimum prerequisites required for install. As I'm only going to use this home for OSB Development I deselect the JRockit JVM. Accept the locations for the installs. If running on a Windows environment you will be asked to start a Node Manger service. This is optional. I have chosen to ignore. Select the user permissions you require, I have set to default. Do a last check to see if the values are correct and continue to install. The install should start. The install should complete successfully. I chose not to run the Quick Start. Extract the OSB download to a location of your choice and double click on the setup.exe. You may be asked to supply a correct java location. Point this to the java installed in your OS. I'm running Windows 7 so I used the 64bit version. Skip the software updates. Set the OSB home to the location of the WLS home installed above Choose a custom install as all we want to install is the OSB Eclipse Plugins. Select OSB IDE. For the rest of the install screens accept the defaults. Start the install There is no need to configure a WLS domain if you only intend to deploy to the remote server. If you need to do this there are other sites how to configure via the configuration wizard. Start Eclipse to make sure the OSB Plugin has been created. In the top right drop down you should see OSB as an option. Connecting to the remote server, select the Server Tab at the bottom Right-click in that frame and select Server. Chose the remote server version and the hostname Provide and name for your server if necessary, and accept the defaults Enter connection details for the remote server Click on the Remote server and it should validate stating its status.Now you ready to develop, Happy developing!

  Read the article

• Combining template method with strategy

  - by Mekswoll

  An assignment in my software engineering class is to design an application which can play different forms a particular game. The game in question is Mancala, some of these games are called Wari or Kalah. These games differ in some aspects but for my question it's only important to know that the games could differ in the following: The way in which the result of a move is handled The way in which the end of the game is determined The way in which the winner is determined The first thing that came to my mind to design this was to use the strategy pattern, I have a variation in algorithms (the actual rules of the game). The design could look like this: I then thought to myself that in the game of Mancala and Wari the way the winner is determined is exactly the same and the code would be duplicated. I don't think this is by definition a violation of the 'one rule, one place' or DRY principle seeing as a change in rules for Mancala wouldn't automatically mean that rule should be changed in Wari as well. Nevertheless from the feedback I got from my professor I got the impression to find a different design. I then came up with this: Each game (Mancala, Wari, Kalah, ...) would just have attribute of the type of each rule's interface, i.e. WinnerDeterminer and if there's a Mancala 2.0 version which is the same as Mancala 1.0 except for how the winner is determined it can just use the Mancala versions. I think the implementation of these rules as a strategy pattern is certainly valid. But the real problem comes when I want to design it further. In reading about the template method pattern I immediately thought it could be applied to this problem. The actions that are done when a user makes a move are always the same, and in the same order, namely: deposit stones in holes (this is the same for all games, so would be implemented in the template method itself) determine the result of the move determine if the game has finished because of the previous move if the game has finished, determine who has won Those three last steps are all in my strategy pattern described above. I'm having a lot of trouble combining these two. One possible solution I found would be to abandon the strategy pattern and do the following: I don't really see the design difference between the strategy pattern and this? But I am certain I need to use a template method (although I was just as sure about having to use a strategy pattern). I also can't determine who would be responsible for creating the TurnTemplate object, whereas with the strategy pattern I feel I have families of objects (the three rules) which I could easily create using an abstract factory pattern. I would then have a MancalaRuleFactory, WariRuleFactory, etc. and they would create the correct instances of the rules and hand me back a RuleSet object. Let's say that I use the strategy + abstract factory pattern and I have a RuleSet object which has algorithms for the three rules in it. The only way I feel I can still use the template method pattern with this is to pass this RuleSet object to my TurnTemplate. The 'problem' that then surfaces is that I would never need my concrete implementations of the TurnTemplate, these classes would become obsolete. In my protected methods in the TurnTemplate I could just call ruleSet.determineWinner(). As a consequence, the TurnTemplate class would no longer be abstract but would have to become concrete, is it then still a template method pattern? To summarize, am I thinking in the right way or am I missing something easy? If I'm on the right track, how do I combine a strategy pattern and a template method pattern? This is part of a homework assignment but I'm not looking to be gifted the answer, I have deliberately been very verbose in my question to show that I have thought about it before coming here to ask a question

  Read the article

• Multidimensional Thinking–24 Hours of Pass: Celebrating Women in Technology

  - by smisner

  It’s Day 1 of #24HOP and it’s been great to participate in this event with so many women from all over the world in one long training-fest. The SQL community has been abuzz on Twitter with running commentary which is fun to watch while listening to the current speaker. If you missed the fun today because you’re busy with all that work you’ve got to do – don’t despair. All sessions are recorded and will be available soon. Keep an eye on the 24 Hours of Pass page for details. And the fun’s not over today. Rather than run 24 hours consecutively, #24HOP is now broken down into 12-hours over two days, so check out the schedule to see if there’s a session that interests you and fits your schedule. I’m pleased to announce that my business colleague Erika Bakse ( Blog | Twitter) will be presenting on Day 2 – her debut presentation for a PASS event. (And I’m also pleased to say she’s my daughter!) Multidimensional Thinking: The Presentation My contribution to this lineup of terrific speakers was Multidimensional Thinking. Here’s the abstract: “Whether you’re developing Analysis Services cubes or creating PowerPivot workbooks, you need to get into a multidimensional frame of mind to produce a model that best enables users to answer their business questions on their own. Many database professionals struggle initially with multidimensional models because the data modeling process is much different than the one they use to produce traditional, third normal form databases. In this session, I’ll introduce you to the terminology of multidimensional modeling and step through the process of translating business requirements into a viable model.” If you watched the presentation and want a copy of the slides, you can download a copy here. And you’re welcome to download the slides even if you didn’t watch the presentation, but they’ll make more sense if you did! Kimball All the Way There’s only so much I can cover in the time allotted, but I hope that I succeeded in my attempt to build a foundation that prepares you for starting out in business intelligence. One of my favorite resources that will get into much more detail about all kinds of scenarios (well beyond the basics!) is The Data Warehouse Toolkit (Second Edition) by Ralph Kimball. Anything from Kimball or the Kimball Group is worth reading. Kimball material might take reading and re-reading a few times before it makes sense. From my own experience, I found that I actually had to just build my first data warehouse using dimensional modeling on faith that I was going the right direction because it just didn’t click with me initially. I’ve had years of practice since then and I can say it does get easier with practice. The most important thing, in my opinion, is that you simply must prototype a lot and solicit user feedback, because ultimately the model needs to make sense to them. They will definitely make sure you get it right! Schema Generation One question came up after the presentation about whether we use SQL Server Management Studio or Business Intelligence Development Studio (BIDS) to build the tables for the dimensional model. My answer? It really doesn’t matter how you create the tables. Use whatever method that you’re comfortable with. But just so happens that it IS possible to set up your design in BIDS as part of an Analysis Services project and to have BIDS generate the relational schema for you. I did a Webcast last year called Building a Data Mart with Integration Services that demonstrated how to do this. Yes, the subject was Integration Services, but as part of that presentation, I showed how to leverage Analysis Services to build the tables, and then I showed how to use Integration Services to load those tables. I blogged about this presentation in September 2010 and included downloads of the project that I used. In the blog post, I explained that I missed a step in the demonstration. Oops. Just as an FYI, there were two more Webcasts to finish the story begun with the data – Accelerating Answers with Analysis Services and Delivering Information with Reporting Services. If you want to just cut to the chase and learn how to use Analysis Services to build the tables, you can see the Using the Schema Generation Wizard topic in Books Online.

  Read the article

• Welcome Oracle Data Integration 12c: Simplified, Future-Ready Solutions with Extreme Performance

  - by Irem Radzik

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 The big day for the Oracle Data Integration team has finally arrived! It is my honor to introduce you to Oracle Data Integration 12c. Today we announced the general availability of 12c release for Oracle’s key data integration products: Oracle Data Integrator 12c and Oracle GoldenGate 12c. The new release delivers extreme performance, increase IT productivity, and simplify deployment, while helping IT organizations to keep pace with new data-oriented technology trends including cloud computing, big data analytics, real-time business intelligence. With the 12c release Oracle becomes the new leader in the data integration and replication technologies as no other vendor offers such a complete set of data integration capabilities for pervasive, continuous access to trusted data across Oracle platforms as well as third-party systems and applications. Oracle Data Integration 12c release addresses data-driven organizations’ critical and evolving data integration requirements under 3 key themes: Future-Ready Solutions Extreme Performance Fast Time-to-Value       There are many new features that support these key differentiators for Oracle Data Integrator 12c and for Oracle GoldenGate 12c. In this first 12c blog post, I will highlight only a few:·Future-Ready Solutions to Support Current and Emerging Initiatives: Oracle Data Integration offer robust and reliable solutions for key technology trends including cloud computing, big data analytics, real-time business intelligence and continuous data availability. Via the tight integration with Oracle’s database, middleware, and application offerings Oracle Data Integration will continue to support the new features and capabilities right away as these products evolve and provide advance features. E    Extreme Performance: Both GoldenGate and Data Integrator are known for their high performance. The new release widens the gap even further against competition. Oracle GoldenGate 12c’s Integrated Delivery feature enables higher throughput via a special application programming interface into Oracle Database. As mentioned in the press release, customers already report up to 5X higher performance compared to earlier versions of GoldenGate. Oracle Data Integrator 12c introduces parallelism that significantly increases its performance as well. Fast Time-to-Value via Higher IT Productivity and Simplified Solutions:  Oracle Data Integrator 12c’s new flow-based declarative UI brings superior developer productivity, ease of use, and ultimately fast time to market for end users.  It also gives the ability to seamlessly reuse mapping logic speeds development.Oracle GoldenGate 12c ‘s Integrated Delivery feature automatically optimally tunes the process, saving time while improving performance. This is just a quick glimpse into Oracle Data Integrator 12c and Oracle GoldenGate 12c. On November 12th we will reveal much more about the new release in our video webcast "Introducing 12c for Oracle Data Integration". Our customer and partner speakers, including SolarWorld, BT, Rittman Mead will join us in launching the new release. Please join us at this free event to learn more from our executives about the 12c release, hear our customers’ perspectives on the new features, and ask your questions to our experts in the live Q&A. Also, please continue to follow our blogs, tweets, and Facebook updates as we unveil more about the new features of the latest release. /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin-top:0in; mso-para-margin-right:0in; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0in; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• Application Performance: The Best of the Web

  - by Michaela Murray

  Wisdom A deep understanding and realization […] resulting in the ability to apply perceptions, judgements and actions. It is also the comprehension of what is true coupled with optimum judgment as to action. - Wikipedia We’re writing a book for ASP.NET developers, and we want you to be a part of it. We know that there’s a huge amount of web developer wisdom that never gets shared, and we want to find those golden nuggets of knowledge and experience, and make sure everyone can learn from them. Right now, we want to find out about your top tips, hard-won lessons, and sage advice for avoiding, finding, and fixing application performance problems. If you work with .NET and SQL, even better – a lot of application performance relies on the interaction with the database, so we want to hear from you! “How Do You Want Me To Be Involved?” Right! Details! We want you, our most excellent readers, to email us with the Best Advice you would give to other developers for getting the best performance out of their applications. It doesn’t matter if your advice is for newbies or veterans, .NET or SQL – so long as it’s about application performance, we want to hear from you. (And if you think that there’s developer wisdom out there that “everyone knows”, a) I’m willing to bet you could find someone who doesn’t know about it, and b) it probably bears repeating anyway!) “I’m Interested. What Can You Do For Me?” Excellent question. For starters, there’s a chance to win a Microsoft Surface (the tablet, not the table-top). Once all the ASP.NET Wisdom has been collected, tallied, and labelled, it will then be weighed and measured by a team of expert judges (whose identities are still a closely-guarded secret).  The top tip in both SQL & .NET categories will each win their author their very own MS Surface. But that’s not all! We can also give you… immortality! More details? Ok. We’ll be collecting all of the tips sent in by our readers (and we can’t wait to learn from you all,) and with the help of our Simple-Talk editors, we will publish and distribute your combined and documented knowledge as a free, community-created, professionally typeset eBook. You will naturally be credited by name / pseudonym / twitter handle / GitHub username / StackOverflow profile / Whatever, as the clearly ingenious author of hot performance tips. The Not-Very-Fine Print Here’s the breakdown: We want to bring together the best application performance knowledge from ASP.NET developers. Closing date for submissions will be 9am GMT, December 4th. Submissions should be made by email – [email protected] Submissions will be judged by a panel of expert judges (who will be revealed soon). The top submission in both the SQL & .NET categories will each win a Microsoft Surface. ALL the tips which make it through the judging process will be polished by Simple-Talk editors, and turned into a professionally typeset eBook, which will be freely available, and promoted alongside the ANTS Performance Profiler tool. Anyone whose entry makes it into the book will be clearly and profusely credited in the method of their choice (or can remain anonymous.) The really REALLY short version Share what you know about ASP.NET application performance for a chance to win a Microsoft Surface, and then get your name credited in a slick eBook with top-notch production values. For more details, see above. We can’t wait to learn from you!

  Read the article

• Measuring Code Quality

  - by DotNetBlues

  Several months back, I was tasked with measuring the quality of code in my organization. Foolishly, I said, "No problem." I figured that Visual Studio has a built-in code metrics tool (Analyze -> Calculate Code Metrics) and that would be a fine place to start with. I was right, but also very wrong. The Visual Studio calculates five primary metrics: Maintainability Index, Cyclomatic Complexity, Depth of Inheritance, Class Coupling, and Lines of Code. The first two are figured at the method level, the second at (primarily) the class level, and the last is a simple count. The first question any reasonable person should ask is "Which one do I look at first?" The first question any manager is going to ask is, "What one number tells me about the whole application?" My answer to both, in a way, was "Maintainability Index." Why? Because each of the other numbers represent one element of quality while MI is a composite number that includes Cyclomatic Complexity. I'd be lying if I said no consideration was given to the fact that it was abstract enough that it's harder for some surly developer (I've been known to resemble that remark) to start arguing why a high coupling or inheritance is no big deal or how complex requirements are to blame for complex code. I should also note that I don't think there is one magic bullet metric that will tell you objectively how good a code base is. There are a ton of different metrics out there, and each one was created for a specific purpose in mind and has a pet theory behind it. When you've got a group of developers who aren't accustomed to measuring code quality, picking a 0-100 scale, non-controversial metric that can be easily generated by tools you already own really isn't a bad place to start. That sort of answers the question a developer would ask, but what about the management question; how do you dashboard this stuff when Visual Studio doesn't roll up the numbers to the solution level? Since VS does roll up the MI to the project level, I thought I could just figure out what sort of weighting Microsoft used to roll method scores up to the class level and then to the namespace and project levels. I was a bit surprised by the answer: there is no weighting. That means that a class with one 1300 line method (which will score a 0 MI) and one empty constructor (which will score a 100 MI) will have an overall MI of a respectable 50. Throw in a couple of DTOs that are nothing more than getters and setters (which tend to score 95 or better) and the project ends up looking really, really healthy. The next poor bastard who has to work on the application is probably not going to be singing the praises of its maintainability, though. For the record, that 1300 line method isn't a hypothetical, either. So, what does one do with that? Well, I decided to weight the average by the Lines of Code per method. For our above example, the formula for the class's MI becomes ((1300 * 0) + (1 * 100))/1301 = .077, rounded to 0. Sounds about right. Continue the pattern for namespace, project, solution, and even multi-solution application MI scores. This can be done relatively easily by using the "export to Excel" button and running a quick formula against the data. On the short list of follow-up questions would be, "How do I improve my application's score?" That's an answer for another time, though.

  Read the article

• Project structure: where to put business logic

  - by Mister Smith

  First of all, I'm not asking where does business logic belong. This has been asked before and most answers I've read agree in that it belongs in the model: Where to put business logic in MVC design? How much business logic should be allowed to exist in the controller layer? How accurate is "Business logic should be in a service, not in a model"? Why put the business logic in the model? What happens when I have multiple types of storage? However people disagree in the way this logic should be distributed across classes. There seem to exist three major currents of thought: Fat model with business logic inside entity classes. Anemic model and business logic in "Service" classes. It depends. I find all of them problematic. The first option is what most Fowlerites stick to. The problem with a fat model is that sometimes a business logic funtion is not only related to a class, and instead uses a bunch of other classes. If, for example, we are developing a web store, there should be a function that calcs an order's total. We could think of putting this function inside the Order class, but what actually happens is that the logic needs to use different classes, not only data contained in the Order class, but also in the User class, the Session class, and maybe the Tax class, Country class, or Giftcard, Payment, etc. Some of these classes could be composed inside the Order class, but some others not. Sorry if the example is not very good, but I hope you understand what I mean. Putting such a function inside the Order class would break the single responsibility principle, adding unnecesary dependences. The business logic would be scattered across entity classes, making it hard to find. The second option is the one I usually follow, but after many projects I'm still in doubt about how to name the class or classes holding the business logic. In my company we usually develop apps with offline capabilities. The user is able to perform entire transactions offline, so all validation and business rules should be implemented in the client, and then there's usually a background thread that syncs with the server. So we usually have the following classes/packages in every project: Data model (DTOs) Data Access Layer (Persistence) Web Services layer (Usually one class per WS, and one method per WS method). Now for the business logic, what is the standard approach? A single class holding all the logic? Multiple classes? (if so, what criteria is used to distribute the logic across them?). And how should we name them? FooManager? FooService? (I know the last one is common, but in our case it is bad naming because the WS layer usually has classes named FooWebService). The third option is probably the right one, but it is also devoid of any useful info. To sum up: I don't like the first approach, but I accept that I might have been unable to fully understand the Zen of it. So if you advocate for fat models as the only and universal solution you are welcome to post links explaining how to do it the right way. I'd like to know what is the standard design and naming conventions for the second approach in OO languages. Class names and package structure, in particular. It would also be helpful too if you could include links to Open Source projects showing how it is done. Thanks in advance.

  Read the article

• Rules and advice for logging?

  - by Nick Rosencrantz

  In my organization we've put together some rules / guildelines about logging that I would like to know if you can add to or comment. We use Java but you may comment in general about loggin - rules and advice Use the correct logging level ERROR: Something has gone very wrong and need fixing immediately WARNING: The process can continue without fixing. The application should tolerate this level but the warning should always get investigated. INFO: Information that an important process is finished DEBUG. Is only used during development Make sure that you know what you're logging. Avoid that the logging influences the behavior of the application The function of the logging should be to write messages in the log. Log messages should be descriptive, clear, short and concise. There is not much use of a nonsense message when troubleshooting. Put the right properties in log4j Put in that the right method and class is written automatically. Example: Datedfile -web log4j.rootLogger=ERROR, DATEDFILE log4j.logger.org.springframework=INFO log4j.logger.waffle=ERROR log4j.logger.se.prv=INFO log4j.logger.se.prv.common.mvc=INFO log4j.logger.se.prv.omklassning=DEBUG log4j.appender.DATEDFILE=biz.minaret.log4j.DatedFileAppender log4j.appender.DATEDFILE.layout=org.apache.log4j.PatternLayout log4j.appender.DATEDFILE.layout.ConversionPattern=%d{HH:mm:ss,SSS} %-5p [%C{1}.%M] - %m%n log4j.appender.DATEDFILE.Prefix=omklassning. log4j.appender.DATEDFILE.Suffix=.log log4j.appender.DATEDFILE.Directory=//localhost/WebSphereLog/omklassning/ Log value. Please log values from the application. Log prefix. State which part of the application it is that the logging is written from, preferably with something for the project agreed prefix e.g. PANDORA_DB The amount of text. Be careful so that there is not too much logging text. It can influence the performance of the app. Loggning format: -There are several variants and methods to use with log4j but we would like a uniform use of the following format, when we log at exceptions: logger.error("PANDORA_DB2: Fel vid hämtning av frist i TP210_RAPPORTFRIST", e); In the example above it is assumed that we have set log4j properties so that it automatically write the class and the method. Always use logger and not the following: System.out.println(), System.err.println(), e.printStackTrace() If the web app uses our framework you can get very detailed error information from EJB, if using try-catch in the handler and logging according to the model above: In our project we use this conversion pattern with which method and class names are written out automatically . Here we use two different pattents for console and for datedfileappender: log4j.appender.CONSOLE.layout.ConversionPattern=%d{ABSOLUTE} %5p %c{1}:%L - %m%n log4j.appender.DATEDFILE.layout.ConversionPattern=%d [%t] %-5p %c - %m%n In both the examples above method and class wioll be written out. In the console row number will also be written our. toString() Please have a toString() for every object. EX: @Override public String toString() { StringBuilder sb = new StringBuilder(); sb.append(" DwfInformation [ "); sb.append("cc: ").append(cc); sb.append("pn: ").append(pn); sb.append("kc: ").append(kc); sb.append("numberOfPages: ").append(numberOfPages); sb.append("publicationDate: ").append(publicationDate); sb.append("version: ").append(version); sb.append(" ]"); return sb.toString(); } instead of special method which make these outputs public void printAll() { logger.info("inbet: " + getInbetInput()); logger.info("betdat: " + betdat); logger.info("betid: " + betid); logger.info("send: " + send); logger.info("appr: " + appr); logger.info("rereg: " + rereg); logger.info("NY: " + ny); logger.info("CNT: " + cnt); } So is there anything you can add, comment or find questionable with these ways of using the logging? Feel free to answer or comment even if it is not related to Java, Java and log4j is just an implementation of how this is reasoned.

  Read the article

• Get Across The Table & Share Your Story By Megha Kapil !!!

  - by Nadiya

  Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 I am sure many of you are presently sitting across the table facing an industry expert to prove your mettle. Generally when you think of an interview; first image is of someone firing you with questions & you trying to hit all the shots right. We make an interview look like a court room where you are a victim & being prosecuted to apply for job: Why have you applied for this job, why do you think you are fit for this role, tell me your strengths, tell me your weaknesses, How, When Where, What..?   Interview is a process of knowing a candidate & his/her fitment in the system for interviewer; where as for interviewee its understanding the organization & his/her role. We have made this process of interview synonym to Q&A session. However, as a matter of fact the best scenario is when an interviewee initiates a conversation; which seldom happens. Why don’t we look at our Interview as a meeting to discover a prospect of lifetime, a process to showcase best of our skills, an opportunity to learn while exchanging meaningful dialogue with experts from industry?  We all get inspired when we get to know somebody’s achievements. We like to listen to interesting life stories of people which are positive & motivating. Do you have a story? Everyone does… It’s only about realizing & putting it together. If you want to win the game then the only trick is to “Drive the Conversation”. Tell the interviewer your story; mind you “An Interesting Story”. It’s a non frictional story where you are the “Hero/ Heroine” & you display your strengths to the best. Your story has to be fabricated with hard facts, incidences, experiences & exposures that fits the role you are interested to be in. Story of your success, that describes your knowledge & awareness about the latest trends in industry; solutions which reflect your logical approach towards problem solving. A story which exhibits clarity of your thoughts & ambition; demonstrates your enthusiasm, willingness to learn & passion. Preparation gives you confidence & genuine preparation never goes unnoticed. Organizations look for distinctive individuals; so don’t try to be someone else. Know yourself; be what you are, articulate your characteristics & craft your Unique Story Right Now!! /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-family:"Calibri","sans-serif"; mso-ascii- mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi- mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;}

  Read the article

• How to Use Sparklines in Excel 2010

  - by DigitalGeekery

  One of the cool features of Excel 2010 is the addition of Sparklines. A Sparkline is basically a little chart displayed in a cell representing your selected data set that allows you to quickly and easily spot trends at a glance. Inserting Sparklines on your Spreadsheet You will find the Sparklines group located on the Insert tab.   Select the cell or cells where you wish to display your Sparklines. Select the type of Sparkline you’d like to add to your spreadsheet. You’ll notice there are three types of Sparklines, Line, Column, and Win/Loss. We’ll select Line for our example. A Create Sparklines pops up and will prompt you to enter a Data Range you are using to create the Sparklines. You’ll notice that the location range (the range where the Sparklines will appear) is already filled in. You can type in the data range manually, or click and drag with your mouse across to select the data range. This will auto-fill the data range for you. Click OK when you are finished.   You will see your Sparklines appear in the desired cells.   Customizing Sparklines Select the one of more of the Sparklines to reveal the Design tab. You can display certain value points like high and low points, negative points, and first and last points by selecting the corresponding options from the Show group. You can also mark all value points by selecting  Markers. Select your desired Sparklines and click one of the included styles from the Style group on the Design tab. Click the down arrow on the lower right corner of the box to display additional pre-defined styles…   or select Sparkline Color or Marker Color options to fully customize your Sparklines. The Axis options allow additional options such as Date Axis Type, Plotting Data Left to Right, and displaying an axis point to represent the zero line in your data with Show Axis. Column Sparklines Column Sparklines display your data in individual columns as opposed to the Line view we’ve been using for our examples. Win/Loss Sparklines Win/Loss shows a basic positive or negative representation of your data set.   You can easily switch between different Sparkline types by simply selecting the current cells (individually or the entire group), and then clicking the desired type on the Design tab. For those that may be more visually oriented, Sparklines can be a wonderful addition to any spreadsheet. Are you just getting started with Office 2010? Check out some of our other great Excel posts such as how to copy worksheets, print only selected areas of a spreadsheet, and how to share data with Excel in Office 2010. Similar Articles Productive Geek Tips Convert a Row to a Column in Excel the Easy WayShare Access Data with Excel in Office 2010Make Excel 2007 Print Gridlines In Workbook FileMake Excel 2007 Always Save in Excel 2003 FormatConvert Older Excel Documents to Excel 2007 Format TouchFreeze Alternative in AutoHotkey The Icy Undertow Desktop Windows Home Server – Backup to LAN The Clear & Clean Desktop Use This Bookmarklet to Easily Get Albums Use AutoHotkey to Assign a Hotkey to a Specific Window Latest Software Reviews Tinyhacker Random Tips DVDFab 6 Revo Uninstaller Pro Registry Mechanic 9 for Windows PC Tools Internet Security Suite 2010 Office 2010 reviewed in depth by Ed Bott FoxClocks adds World Times in your Statusbar (Firefox) Have Fun Editing Photo Editing with Citrify Outlook Connector Upgrade Error Gadfly is a cool Twitter/Silverlight app Enable DreamScene in Windows 7

  Read the article

• SQL SERVER – Performance Tuning Resolution

  - by pinaldave

  This blog post is written in response to T-SQL Tuesday hosted by MidnightDBAs. Taking resolutions is such an interesting subject. I think just like records, these are broken way more often. I find this is the funniest thing as we all take resolutions every year but not every year, we can manage to keep them. Well, does it mean we should not take resolutions? In fact I support resolutions. Every year, I take a resolution that I will strive reduce my body weight and I usually manage to keep eating healthy till the end of January. When February begins, I begin to loose focus from my goal and as March starts, the “As usual” eating habits begin. Looking at the positive side, what would happen if every year I do not eat healthy in January, I think that might cause terrible consequences to my health in the long run. So keeping resolutions is a good practise and following them to the extent one can is commendable. Let us come back to the world of SQL Server. What is my resolution for year 2011 for SQL Server? There are many, I am going to list three of very important resolutions that I have taken this new year over here. To understand SQL Server Performance Tuning at a deeper Level I think I am already half way through. I have been being very much busy during any given month doing hands-on performance tuning for at least 12 days on an average. That means, I am doing this activity for almost doing 2 weeks a month. I believe that I have a good understanding of the subject. Note that the word that I have used is “good,” and not “best.” There are often cases when I am stumped, and I have no clue of what to do next. Then, I usually go for my “trial and error” method - whichever method works, I make sure to keep a note on my blog. My goal is that I should never ever go for the trial and error method again to achieve the same solution. I should know the solution right away when I see the problem. I do understand that Performance Tuning can be a strange animal at times and one cannot guess the right step every time. However, aiming a high goal never hurts and I am going to learn more and more in this focused area. Going further from Basic BI understanding I do fairly decent with BI concepts. I know the nbasics of SSIS, SSRS, SSAS, PowerPivot and SharePoint (and few other things MDS, StreamInsight, etc). However, I still consider myself as a beginner. I do not have hands-on experience like many other BI Gurus around. I think I want to take my learning further in this direction. I do not want to be a BI expert as the first step but the goal is to move ahead from basic level towards an advanced level. I am going to start presenting in User Group Sessions and other places on this subject. When I have to prepare new subject for presentations, I think I force myself to learn more. I am committed to learn a bit more in this direction. Learning new features SQL Server 2011 Denali This is new thing from “Microsoft” for all the SQL Geeks. I am eagerly waiting for final product later this year and I am planning to learn it well. I think if I follow my above two goals, I think this goal will be automatically covered. I am eager and excited for this new offering from Microsoft. I guess, these are my resolutions; may be next year about the same time, I must revisit this post and see how much successful I am in following my goal. On a lighter note, I am particularly fan of following cartoon strip (Courtesy: Calvin and Hobbes). I think when we cannot resolve our resolutions, we tend to act like Calvin. Reference: Pinal Dave (http://blog.SQLAuthority.com) Filed under: About Me, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

  Read the article

• Tip on Reusing Classes in Different .NET Project Types

  - by psheriff

  All of us have class libraries that we developed for use in our projects. When you create a .NET Class Library project with many classes, you can use that DLL in ASP.NET, Windows Forms and WPF applications. However, for Silverlight and Windows Phone, these .NET Class Libraries cannot be used. The reason is Silverlight and Windows Phone both use a scaled down version of .NET and thus do not have access to the full .NET framework class library. However, there are many classes and functionality that will work in the full .NET and in the scaled down versions that Silverlight and Windows Phone use.Let’s take an example of a class that you might want to use in all of the above mentioned projects. The code listing shown below might be something that you have in a Windows Form or an ASP.NET application. public class StringCommon{  public static bool IsAllLowerCase(string value)  {    return new Regex(@"^([^A-Z])+$").IsMatch(value);  }   public static bool IsAllUpperCase(string value)  {    return new Regex(@"^([^a-z])+$").IsMatch(value);  }} The StringCommon class is very simple with just two methods, but you know that the System.Text.RegularExpressions namespace is available in Silverlight and Windows Phone. Thus, you know that you may reuse this class in your Silverlight and Windows Phone projects. Here is the problem: if you create a Silverlight Class Library project and you right-click on that project in Solution Explorer and choose Add | Add Existing Item… from the menu, the class file StringCommon.cs will be copied from the original location and placed into the Silverlight Class Library project. You now have two files with the same code. If you want to change the code you will now need to change it in two places! This is a maintenance nightmare that you have just created. If you then add this to a Windows Phone Class Library project, you now have three places you need to modify the code! Add As LinkInstead of creating three separate copies of the same class file, you want to leave the original class file in its original location and just create a link to that file from the Silverlight and Windows Phone class libraries. Visual Studio will allow you to do this, but you need to do one additional step in the Add Existing Item dialog (see Figure 1). You will still right mouse click on the project and choose Add | Add Existing Item… from the menu. You will still highlight the file you want to add to your project, but DO NOT click on the Add button. Instead click on the drop down portion of the Add button and choose the “Add As Link” menu item. This will now create a link to the file on disk and will not copy the file into your new project. Figure 1: Add as Link will create a link, not copy the file over. When this linked file is added to your project, there will be a different icon next to that file in the Solution Explorer window. This icon signifies that this is a link to a file in another folder on your hard drive.   Figure 2: The Linked file will have a different icon to show it is a link. Of course, if you have code that will not work in Silverlight or Windows Phone -- because the code has dependencies on features of .NET that are not supported on those platforms – you  can always wrap conditional compilation code around the offending code so it will be removed when compiled in those class libraries. SummaryIn this short blog entry you learned how to reuse one of your class libraries from ASP.NET, Windows Forms or WPF applications in your Silverlight or Windows Phone class libraries. You can do this without creating a maintenance nightmare by using the “Add a Link” feature of the Add Existing Item dialog. Good Luck with your Coding,Paul Sheriff ** SPECIAL OFFER FOR MY BLOG READERS **Visit http://www.pdsa.com/Event/Blog for a free video on Silverlight entitled Silverlight XAML for the Complete Novice - Part 1.

  Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >