Search Results

Search found 29284 results on 1172 pages for 'weblogic 10 x'.

Page 434/1172 | < Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >

• nameserver spoiling avahi multicast name resolution of .local domain

  - by Doug Coburn

  After trying to ping a machine on my local network, I noticed that I was trying hit address 66.152.109.24. This is an external public address. Resolution should have occurred via avahi mDNS. I ran dig to see how the name resolution worked and my quest/centurylink name server was retuning results for my .local domain queries! I tried a random name and got the same ip address result. $ dig jakdafj.local ; <<>> DiG 9.8.1-P1-RedHat-9.8.1-3.P1.fc15 <<>> jakdafj.local ;; global options: +cmd ;; Got answer: ;; ->>HEADER<<- opcode: QUERY, status: NOERROR, id: 58410 ;; flags: qr rd ra; QUERY: 1, ANSWER: 2, AUTHORITY: 0, ADDITIONAL: 0 ;; QUESTION SECTION: ;jakdafj.local. IN A ;; ANSWER SECTION: jakdafj.local. 10 IN A 66.152.109.24 jakdafj.local. 10 IN A 204.232.231.46 ;; Query time: 104 msec ;; SERVER: 205.171.3.25#53(205.171.3.25) ;; WHEN: Sat Mar 24 20:40:17 2012 ;; MSG SIZE rcvd: 63 Am I missing something or is my DNS name server at 205.171.3.25 corrupted?

  Read the article

• Puppet file transfer slow

  - by Noodles

  I have a puppet master and slaves in different datacenters. The latency between them is ~40ms. When I run "puppet agent --test" on a slave to apply the latest manifest it takes ~360 seconds to finish. After doing some digging I can see the main cause of the slow down is file transfers. It seems it's taking ~10 seconds to transfer each file. The files are only small (configuration files) so I can't understand why they would take so long. This is an example of a file in my manifest: file { "/etc/rsyncd.conf" : owner => "root", group => "root", mode => 644, source => "puppet:///files/rsyncd/rsyncd.conf" } Running puppet-profiler I see this: 10.21s - File[/etc/rsyncd.conf] It also seems I cannot update more than one server at once using puppet. If I run two servers at the same time then puppet takes twice as long. I have changed the puppet master from using webrick to mongrel, but this doesn't seem to help. This is making deploying changes painful. A simple config change can take an hour to roll out to all servers.

  Read the article

• OS X AFP shares and access

  - by gbrandt

  I am running 10.5.6 Client as a mini server and am having problems with AFP shares. All clients are OS X 10.5.7 I have created three users for 'File Sharing' only on the 'server'. I have created groups and placed these users into specific groups. I have created ACL's to give each group access to certain shares. Two of those users can read and write to any share, one user cannot write to the shares, with different results: when copying a directory, only the directory is created, no files inside are copied, the OS does not give any errors when copying a single file I get three dialogs: "You may need to enter the name and password for an administrator on this computer to change the item named 'xxxx', "The item 'xxxxx' contains one or more items you do not have permission to read. Do you want to copy the items you are allowed to read?, and, The operation cannot be completed because you do not have sufficient priveleges for some of the items. With the single file, a file gets created on the server, but is empty. My ACL for the group this user belongs to is: 0: group:projectmembers allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit 1: group:informationtechnology inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit 2: group:executive inherited allow list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit 3: group:everyone inherited deny list,add_file,search,delete,add_subdirectory,delete_child,readattr,writeattr,readextattr,writeextattr,readsecurity,file_inherit,directory_inherit User 1 & 2 belong to informationtechnology and executive and projectmembers, they can read and write freely on the share. User 3 belongs to projectmembers and cannot read and write freely. I have read that this is a UID issue, however User 1 & 2 do not have matching UID's across clients and server and they work, so I don't think this is the case. Any ideas?

  Read the article

• Bash mine script, please

  - by HomelyPoet

  The script, in and of its self, is fairly self-explanatory. Use if You so desire; any and all criticism wouldst be appreciated, as wouldst any suggestions for improvement. First iteration was writ upon OS X 10.5.8 Leopard, current iteration was run upon OS X 10.6.4 Snow Leopard with Safari 5.0.2 (6533.18.5). Also, any illumination as to why the first line ' if [ -f ] ' works, but ' if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] ' generates an error? [yes, I am a bit of a Noob] Code: #! /bin/bash # SafariClear0.0.6 if [ -f ] then cat /dev/null > ~/Library/Safari/LocalStorage/*.localstorage rm -f ~/Library/Safari/LocalStorage/*.localstorage fi if [ -f ~/Library/Safari/LocalStorage/*.localstorage ] then echo "Oy vey!" fi cd ~/Library/Safari/ cat /dev/null > WebpageIcons.db cat /dev/null > TopSites.plist cat /dev/null > LocationPermissions.plist cat /dev/null > LastSession.plist cat /dev/null > History.plist echo "Clear" exit

  Read the article

• ssh keys rejected each day

  - by EddyR

  I've had OpenSSH server running on my debian server for a couple weeks and all of a sudden now when I go to login the next day it rejects my ssh key and I have to manually add a new one each time. Not only that but I have the "tunneling with clear-text passwords" option enabled and the non-root (login with root is disabled) account for that is rejected too. I'm at a loss why this is happening and I can't find any ssh options that would explain it. --update-- I just changed debug level to DEBUG. But before that I'm seeing a lot of the following in auth.log Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session opened for user root by (uid=0) Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session closed for user root ... Feb 1 04:36:26 greenpages sshd[7217]: reverse mapping checking getaddrinfo for nat-pool-xx-xx-xx-xx.myinternet.net [xx.xx.xx.xx] failed - POSSIBLE BREAK-IN ATTEMPT! ... Feb 1 04:37:31 greenpages sshd[7223]: Did not receive identification string from xx.xx.xx.xx ... My sshd_conf file settings are: # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port xxx # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no ClientAliveInterval 60 AllowUsers myuser

  Read the article

• xampp apache on windows 7 returns http header only

  - by bumperbox

  i am having issues with xampp running on windows 7 RC32 i type in a localhost and get a header back only, no page content somedays it works fine, other days i can't get it to work after multiple attempts, reboot or otherwise the request doesn't even get put into the acccess log which seems unusual here is the log file at startup incase that helps any ideas ?? [Wed Sep 09 12:27:08 2009] [notice] Digest: generating secret for digest authentication ... [Wed Sep 09 12:27:08 2009] [notice] Digest: done [Wed Sep 09 12:27:09 2009] [notice] Apache/2.2.11 (Win32) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.8i PHP/5.2.9 configured -- resuming normal operations [Wed Sep 09 12:27:09 2009] [notice] Server built: Dec 10 2008 00:10:06 [Wed Sep 09 12:27:09 2009] [notice] Parent: Created child process 2500 [Wed Sep 09 12:27:10 2009] [notice] Digest: generating secret for digest authentication ... [Wed Sep 09 12:27:10 2009] [notice] Digest: done [Wed Sep 09 12:27:11 2009] [notice] Child 2500: Child process is running [Wed Sep 09 12:27:11 2009] [notice] Child 2500: Acquired the start mutex. [Wed Sep 09 12:27:11 2009] [notice] Child 2500: Starting 250 worker threads. [Wed Sep 09 12:27:11 2009] [notice] Child 2500: Starting thread to listen on port 443. [Wed Sep 09 12:27:11 2009] [notice] Child 2500: Starting thread to listen on port 80. [Wed Sep 09 12:27:15 2009] [notice] Parent: child process exited with status 255 -- Restarting. [Wed Sep 09 12:27:15 2009] [notice] Digest: generating secret for digest authentication ... [Wed Sep 09 12:27:15 2009] [notice] Digest: done [Wed Sep 09 12:27:16 2009] [notice] Apache/2.2.11 (Win32) DAV/2 mod_ssl/2.2.11 OpenSSL/0.9.8i PHP/5.2.9 configured -- resuming normal operations [Wed Sep 09 12:27:16 2009] [notice] Server built: Dec 10 2008 00:10:06 [Wed Sep 09 12:27:16 2009] [notice] Parent: Created child process 3252 [Wed Sep 09 12:27:17 2009] [notice] Digest: generating secret for digest authentication ... [Wed Sep 09 12:27:17 2009] [notice] Digest: done [Wed Sep 09 12:27:18 2009] [notice] Child 3252: Child process is running [Wed Sep 09 12:27:18 2009] [notice] Child 3252: Acquired the start mutex. [Wed Sep 09 12:27:18 2009] [notice] Child 3252: Starting 250 worker threads. [Wed Sep 09 12:27:18 2009] [notice] Child 3252: Starting thread to listen on port 443. [Wed Sep 09 12:27:18 2009] [notice] Child 3252: Starting thread to listen on port 80.

  Read the article

• Controller Error: Do I need to worry?

  - by Kryten

  Hi, I have a HP Pavillion dv5224ea Laptop with Windows 7 on it. Recently I discovered a Error in Event Viewer: The driver detected a controller error on \Device\Ide\IdePort1. (more details): - System - Provider [ Name] atapi - EventID 11 [ Qualifiers] 49156 Level 2 Task 0 Keywords 0x80000000000000 - TimeCreated [ SystemTime] 2010-03-07T12:43:07.090197600Z EventRecordID 30198 Channel System Computer Alistair-Win7 Security - EventData \Device\Ide\IdePort1 0000100001000000000000000B0004C002000000850100C00000000000000000000000000000000000000000000000000000000004100000 -------------------------------------------------------------------------------- Binary data: In Words 0000: 00100000 00000001 00000000 C004000B 0008: 00000002 C0000185 00000000 00000000 0010: 00000000 00000000 00000000 00000000 0018: 00000000 00001004 In Bytes 0000: 00 00 10 00 01 00 00 00 ........ 0008: 00 00 00 00 0B 00 04 C0 .......À 0010: 02 00 00 00 85 01 00 C0 ......À 0018: 00 00 00 00 00 00 00 00 ........ 0020: 00 00 00 00 00 00 00 00 ........ 0028: 00 00 00 00 00 00 00 00 ........ 0030: 00 00 00 00 04 10 00 00 ........ Event Viewer is recording A LOT of these errors (sometimes 13, one after the other!). Do I need to worry? What does this error mean? What device could "\Device\Ide\IdePort1" be? What is a ATAPI Error? Do I need to re-install Windows? I generally find the occurs when I try to backup my machine (using Windows Backup) or when using a program that uses Volume Shadow Copy. I have run "sfc", no problems. There are no Device Errors in Device Manager. I have also run "vssadmin list writers", no problems. Whats going on??? Would it be a good idea to re-install Windows 7?

  Read the article

• Can't ping a DNS zone on windows server 2008 R2

  - by Roberto Fernandes

  I´ve just configured a windows server 2008 r2, but got a lot of problems on DNS role. Let me talk about the server configuration: name: fdserver IP address: 192.168.0.10 I have a DNS zone called "fd.local". This is my domain and it´s working ok. I´ve created a zone called fdserver, and inside this zone a record (A) with "*" as a host. because this is a webserver, i´ve configured apache so if you enter something like "site.fdserver" it will point you to the "site" folder. This is working ok ONLY inside the server. This server is a DNS server too... and have 3 entries: 192.168.0.10 (his own IP), 8.8.8.8 and 8.8.4.4 (google public DNS). Now start the problems... Most of the computers on my network, CAN join the domain without problems. But just CAN'T ping "something.fdserver". Now comes the strange thing... If I remove the twoo secondary entries on my DNS server (8.8.8.8 and 8.8.4.4), it obvious stop accessing websites (like microsoft.com), but now the computer CAN ping "something.fdserver". I don´t know If I explained correctly... and my English is terrible... but inside the server is all working as it supposed to work. But in the workstation machines, it work only if I remove the secondary DNS!! If you need any details, just ask! thanks!

  Read the article

• Xen networking is inconsistent in multiple ways

  - by WildVelociraptor

  I've been running xen for a few weeks now on an Ubuntu 12.04 server. I've got 3 guests: a Windows Server 2003 guest, an Ubuntu guest, and a Windows 7 Guest. My Server 2003 guest seems to work fine; I can ping it from the network, the hostname resolves correctly, and it can see the internet. This guest is attached to xenbr0, and its IP is 10.100.1.21. My Win7 guest is what is driving me crazy. I use the same configuration script as a base, changing the important parts (hostname and boot disk, mainly). It installed correctly, and is currently running, but I am unable to ping this guest. It's hostname is "alexander", with an IP of 10.100.1.22. It is also using xenbr0. The guest can ping the firewall and various IP addressess, but seems unable to resolve hostnames. Now heres the weird part: when I use rdesktop (RDP client) from my laptop (not the xen host) to connect to alexander, it works just fine. It apparently resolves the hostname fine, and does the same with the IP address. So, can someone tell me why I can access this guest using RDP, but not using ping, nslookup, traceroute, etc? It's apparently invisible to all but RDP. Also, is it okay to use two guests on the same bridge, or do i need different ones for each guest? Thanks in advance for any help. Regards

  Read the article

• Request bursting from web application Load Tests

  - by MaseBase

  I'm migrating our web and database hosting to a new environment on all new machines. I've recently performed a Load Test using WAPT to generate load from multiple distributed clients. The server has plenty of room to handle the traffic load, but I'm seeing an odd pattern of incoming traffic during the load tests. Here is the gist of our setup: Firewall server running MS Forefront TMG 2010 on Win 2k8 server Request routing done by IIS Application Request Routing on firewall machine Web server is a Hyper-V VM on the Database server (which is the host OS) These machines are hefty with dual-CPU's with six cores (12 total procs) Web server running IIS 7.5 Web applications built in ASP.NET 2.0, with 1 ISAPI filter (Url Rewrite) in front What I'm seeing during the load tests is that the requests all come through in bursts. Even though I have 7 different distributed clients sending traffic loads, the requests come through about 300-500 requests at a time. The performance monitor shows nearly all of the counters moving through this pattern, where a burst of requests comes in the req/sec jumps to 70, the queued requests jumps to 500, the current requests jumps up, the CPU jumps up, everything. Then once it's handled that group of requests, it has a lull for nearly 10 seconds where nearly nothing is happening. 0-5 req/sec, 0 queued requests, minimal CPU usage. Then after 10 seconds of inactivity, another burst comes through, spiking all of the counters once again. What I can't figure out is why the requests are coming through in bursts when I know that the load being generated is not sent that way, especially considering the various load-generating clients sending traffic all in different intervals with random think time's between each request. Is there something in the layers between Hyper-V or perhaps in the hardware which might cause this coalesce of requests together? Here is what i'm looking at, the highlighted metric is Requests/sec, but the others critical counter go with it: Requests Queued (which I'd obviously like to keep as close to 0 as possible). Any ideas on this?

  Read the article

• How to remove all Couchdb versions in Ubuntu 10.04 (server)? ( after multiple installs )

  - by DjangoRocks

  Hi all, I have done multiple installs of CouchDB using sudo aptitude install couchdb sudo ap-get install couchdb and more recently based on the instructions found at L http://wiki.apache.org/couchdb/Installing_on_Ubuntu May I know how do I uninstall or remove all the above installations? Best Regards. +++++++++++++++++++UPDATE++++++++++++++++++++++++ I've tried running the following commands: apt-get remove couchdb apt-get purge couchdb but received the following errors: (Reading database ... 39814 files and directories currently installed.) Removing couchdb ... invoke-rc.d: initscript couchdb, action "stop" failed. dpkg: error processing couchdb (--remove): subprocess installed pre-removal script returned error exit status 1 invoke-rc.d: initscript couchdb, action "start" failed. dpkg: error while cleaning up: subprocess installed post-installation script returned error exit status 1 Errors were encountered while processing: couchdb E: Sub-process /usr/bin/dpkg returned an error code (1) May I know how do i fix this? ON issuing the command : dpkg -l | grep couchdb I received the following response: rF couchdb 0.10.0-1ubuntu2 RESTful document oriented database, system D iF couchdb-bin 0.10.0-1ubuntu2 RESTful document oriented database, programs How do i uninstall CouchDB ? I think there's some file corruption?

  Read the article

• Linux Experts Riddle: Network output of 10MB/s on 10GB/s NIC

  - by user150324

  I have two CentOS 6 servers. I am trying to transfer files between them. Source server has 10GB/s NIC nd destination server has 1GB/s NIC. Regardless to the command used nor the protocol, the transfer speed is ~1 Mega byte per second. The goal is at least couple dozens MB per second. I have tried: rsync (also with various encryptions), scp, wget, aftp, nc. Here's some testing results with iperf: [root@serv ~]# iperf -c XXX.XXX.XXX.XXX -i 1 ------------------------------------------------------------ Client connecting to XXX.XXX.XXX.XXX, TCP port 5001 TCP window size: 64.0 KByte (default) ------------------------------------------------------------ [ 3] local XXX.XXX.XXX.XXX port 33180 connected with XXX.XXX.XXX.XXX port 5001 [ ID] Interval Transfer Bandwidth [ 3] 0.0- 1.0 sec 1.30 MBytes 10.9 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 1.0- 2.0 sec 1.28 MBytes 10.7 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 2.0- 3.0 sec 1.34 MBytes 11.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 3.0- 4.0 sec 1.53 MBytes 12.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 4.0- 5.0 sec 1.65 MBytes 13.8 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 5.0- 6.0 sec 1.79 MBytes 15.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 6.0- 7.0 sec 1.95 MBytes 16.3 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 7.0- 8.0 sec 1.98 MBytes 16.6 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 8.0- 9.0 sec 1.91 MBytes 16.0 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 9.0-10.0 sec 2.05 MBytes 17.2 Mbits/sec [ ID] Interval Transfer Bandwidth [ 3] 0.0-10.0 sec 1.68 MBytes 14.0 Mbits/sec I guess HD is not the bottleneck here.

  Read the article

• Debian Linux bridging router intermittently dropping packets [migrated]

  - by nomen

  My old Asus router died a few weeks ago, so I thought I'd set up my Debian box to deal with routing my home network. I have a few complications, but I adapted my configuration from a previously working configuration, and I don't see why I am having intermittent problems. But I am having them! Every so often, my SSH connections to the router (and to the Xen virtual machines hosted by the router) just drop. I am unable to use the router's dns server. I can't ping the router. Etc. (I can provide more details, but I'm not sure what will be helpful) /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # Gigabit ethernet, internal network auto eth0 allow-hotplug eth0 iface eth0 inet manual # USB ethernet, internet auto eth1 allow-hotplug eth1 iface eth1 inet dhcp # Xen Bridge auto xlan0 iface xlan0 inet static bridge_ports eth0 address 10.47.94.1 netmask 255.255.255.0 As I understand it, this is sufficient to create the network interfaces, and even do some switching between Xen hosts and my eth0 interface. I installed and configured Shorewall to manage routing: /etc/shorewall/zones fw firewall net ipv4 lan ipv4 /etc/shorewall/interfaces net eth1 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians lan xlan0 detect dhcp,tcpflags,nosmurfs,routefilter,logmartians,routeback,bridge /etc/shorewall/policy net all DROP info fw net ACCEPT info all all REJECT info /etc/shorewall/rules DNS(ACCEPT) fw net DNS(ACCEPT) lan fw ... and so on, these all work, when the router is accepting traffic at all. /etc/shorewall/masq eth1 10.47.94.0/24 Can anybody help?

  Read the article

• Any way to bring my laptop battery back to life?

  - by Josh

  Recently my laptop battery will get extremely hot (definitely hotter than it should get) when I charge it. After that I usually end up removing it once it's fully charged to let it cool down, which takes a couple hours... Question is, is my battery dead? My last battery I had that died just ended up lasting 2 - 3 minutes on battery, no weird heat issues. And is there any way to possibly fix this? Probably not but I won't be able to get a replacement anytime soon. UPDATE: A few days ago when this happened and it cooled down, assuming it was fully charged, I ran my laptop on battery, and the battery life lasted about 10 minutes and then the laptop shutdown. I then plugged it in later and charged it back up, and for a while I had a orange light blinking on my laptop - which I assumed meant the battery was dead, especially since I got 10 minutes battery life. Then today, I turned my laptop on and was surprised to see that the battery was at 20% and charging (it's been plugged in since the incident above, so it should have been fully charged when I shut it off) I let it charge up, and as usual it got pretty hot around the time it was fully charged. So I turned my laptop off and pulled the battery out to let it cool down Now the thing is, just now I tried running it on battery, and it's been going for an hour now... so maybe its not dead? (also the orange light is no longer blinking...) Thanks in advance if anyone knows whats going on, and how to fix it, if its fixable =] EDIT: Some info if it helps... my laptop is about 2 years ago, and it's an Asus K50ID. I know laptop batteries usually don't last more than a year but I'm trying to keep this one going for as long as I can.

  Read the article

• Redis 2.0.3 would not let go of deleted appendonly.aof file after BGREWRITEAOF

  - by Alexander Gladysh

  Ubuntu 10.04.2, Redis 2.0.3 (more details at the end of the question). My AOF file for Redis is getting too large, to the point where it soon would threaten to take whole free disk space on my small-HDD VPS box: $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda 32G 24G 6.7G 78% / $ ls -la total 3866688 drwxr-xr-x 2 redis redis 4096 2011-03-02 00:11 . drwxr-xr-x 29 root root 4096 2011-01-24 15:58 .. -rw-r----- 1 redis redis 3923246988 2011-03-02 00:14 appendonly.aof -rw-rw---- 1 redis redis 32356467 2011-03-02 00:11 dump.rdb When I run BGREWRITEAOF, the AOF file shrinks, but disk space is not freed: $ ls -la total 95440 drwxr-xr-x 2 redis redis 4096 2011-03-02 00:17 . drwxr-xr-x 29 root root 4096 2011-01-24 15:58 .. -rw-rw---- 1 redis redis 65137639 2011-03-02 00:17 appendonly.aof -rw-rw---- 1 redis redis 32476167 2011-03-02 00:17 dump.rdb $ df -h Filesystem Size Used Avail Use% Mounted on /dev/xvda 32G 24G 6.7G 78% / Sure enough, Redis is still holding the deleted file: $ sudo lsof -p6916 COMMAND PID USER FD TYPE DEVICE SIZE/OFF NODE NAME ... redis-ser 6916 redis 7r REG 202,0 3923957317 918129 /var/lib/redis/appendonly.aof (deleted) ... redis-ser 6916 redis 10w REG 202,0 66952615 917507 /var/lib/redis/appendonly.aof ... How can I workaround this issue? I can restart Redis this time, but I would really like to avoid doing this on a regular basis. Note that I can not upgrade to 2.2 (upgrade to 2.0.4 is feasible though). More information on my system: $ lsb_release -a No LSB modules are available. Distributor ID: Ubuntu Description: Ubuntu 10.04.2 LTS Release: 10.04 Codename: lucid $ uname -a Linux my.box 2.6.32.16-linode28 #1 SMP Sun Jul 25 21:32:42 UTC 2010 i686 GNU/Linux $ redis-cli info redis_version:2.0.3 redis_git_sha1:00000000 redis_git_dirty:0 arch_bits:32 multiplexing_api:epoll process_id:6916 uptime_in_seconds:632728 uptime_in_days:7 connected_clients:2 connected_slaves:0 blocked_clients:0 used_memory:65714632 used_memory_human:62.67M changes_since_last_save:8398 bgsave_in_progress:0 last_save_time:1299014574 bgrewriteaof_in_progress:0 total_connections_received:17 total_commands_processed:55748609 expired_keys:0 hash_max_zipmap_entries:64 hash_max_zipmap_value:512 pubsub_channels:0 pubsub_patterns:0 vm_enabled:0 role:master db0:keys=1,expires=0 db1:keys=18,expires=0

  Read the article

• check_snmp with snmpv3 protocol giving "Unkown Report message" error

  - by John

  I'm trying to add a nagios command to use snmpv3 for monitoring printer status messages. When using the check_snmp command, I get the following error: External command error: snmpget: Unknown Report message Here is the command I'm typing in: ./check_snmp -P 3 -H <hostname> -L authPriv -U snmpuser -A snmppassword -X snmppassword -o 1.3.6.1.4.1.11.2.4.3.1.2.0 -C public -d "STRING:" -a MD5 These values for auth key, private key, username, etc all work when using snmpwalk. Can someone enlighten me as to what that error message really means? EDIT: It looks like check_snmp isn't taking my v3 credentials when passing over to snmpget. Here is my input with the verbose option: ./check_snmp -H <hostname> -o 1.3.6.1.2.1.2.2.1.10.1 -C public -m ALL -P 3 -L authPriv -U snmpuser -a MD5 -A snmppassword -x DES -X snmppassword -v And here is the output: /usr/bin/snmpget -t 1 -r 5 -m ALL -v 3 [authpriv] <hostname>:161 1.3.6.1.2.1.2.2.1.10.1 External command error: snmpget: Unknown Report message So I guess now my question would be: why isn't check_snmp passing all the commandline options to snmpget?

  Read the article

• Giving VPN connections access to all locations?

  - by Jeff

  I have asked a similiar question, but didn't get any answers so i am going to try and rephrase. i have 4 locations corporate and 3 remotes when you are at the corporate location, you have full access to all networks. 192.168.3.x 192.168.2.x 192.168.1.x 192.168.0.x all locations are connected via site-to-site vpn with the corporate location. if you are at a remote location, you have access to that location & the corporate location. the corporate location handles all VPN traffic. however, when you VPN into the corporate location, you can not see outside the corporate location. can anyone provide some information or a link explaining how to allow the VPN users to see all locations? thanks static route configuration: Gateway of last resort is 207.255.x.1 to network 0.0.0.0 C 207.255.x.0 255.255.255.0 is directly connected, outside S 10.0.1.6 255.255.255.255 [1/0] via 207.255.x.1, outside S 10.0.1.5 255.255.255.255 [1/0] via 207.255.x.1, outside S 192.168.0.0 255.255.255.0 [1/0] via 192.168.0.1, inside C 192.168.1.0 255.255.255.0 is directly connected, inside S 192.168.2.0 255.255.255.0 [1/0] via 192.168.2.1, inside S 192.168.3.0 255.255.255.0 [1/0] via 192.168.3.1, inside S* 0.0.0.0 0.0.0.0 [1/0] via 207.255.x.1, outside [1/0] via 192.168.1.1, outside

  Read the article

• How can I use two Internet connections in Ubuntu?

  - by Martin

  My goal is to be able to do something like this: curl google.com --interface ppp0 curl google.com --interface p2p2 ppp0 is a DSL connection, and p2p2 is a separate direct Internet connection. Currently I can only get one of these to work at a time. When I enable one, the other one stops working. /etc/network/interfaces: # The loopback network interface auto lo iface lo inet loopback # DSL auto p2p1 iface p2p1 inet manual auto dsl-provider iface dsl-provider inet ppp pre-up /sbin/ifconfig p2p1 up # line maintained by pppoeconf provider dsl-provider # DIRECT auto p2p2 iface p2p2 inet dhcp ifconfig: lo Link encap:Local Loopback inet addr:127.0.0.1 Mask:255.0.0.0 inet6 addr: ::1/128 Scope:Host UP LOOPBACK RUNNING MTU:65536 Metric:1 p2p1 Link encap:Ethernet inet6 addr: fe80::20a:ebff:fe21:99c6/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 p2p2 Link encap:Ethernet inet addr:192.168.1.101 Bcast:192.168.1.255 Mask:255.255.255.0 inet6 addr: fe80::20a:ebff:fe17:1249/64 Scope:Link UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1 ppp0 Link encap:Point-to-Point Protocol inet addr:53.193.231.167 P-t-P:53.193.224.1 Mask:255.255.255.255 UP POINTOPOINT RUNNING NOARP MULTICAST MTU:1492 Metric:1 route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface 0.0.0.0 0.0.0.0 0.0.0.0 U 0 0 0 ppp0 10.0.10.0 0.0.0.0 255.255.255.0 U 0 0 0 eth2 53.193.224.1 0.0.0.0 255.255.255.255 UH 0 0 0 ppp0 192.168.1.0 0.0.0.0 255.255.255.0 U 0 0 0 p2p2 By default, only ppp0 works. If I run "route add default gw 192.168.1.1 p2p2" then I can use p2p2 but ppp0 stops working. If I then run "route add default gw 53.193.224.1 ppp0" then I can use ppp0 again but p2p2 stops working. What can I do to be able to use both interfaces selectively?

  Read the article

• Fetch videos from sony handycam to linux

  - by bstpierre

  I've got a Sony Handycam DCR-DVD101. When I plug connect the USB cable to my laptop (Ubuntu 10) it doesn't mount any storage device. If I run usb-devices, I see: T: Bus=02 Lev=02 Prnt=02 Port=00 Cnt=01 Dev#= 6 Spd=480 MxCh= 0 D: Ver= 2.00 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=054c ProdID=00c1 Rev=01.00 S: Manufacturer=SONY S: Product=Storage Device C: #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr=2mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=05 Prot=50 Driver=usb-storage The driver says usb-storage, but I'm not sure how to get the device mounted. Is there a way to make this work? Update: checking dmesg, I see: [259072.576559] usb 2-1.1: new high speed USB device using ehci_hcd and address 6 [259072.687200] usb 2-1.1: configuration #1 chosen from 1 choice [259072.836188] Initializing USB Mass Storage driver... [259072.836476] scsi5 : SCSI emulation for USB Mass Storage devices [259072.836632] usb-storage: device found at 6 [259072.836636] usb-storage: waiting for device to settle before scanning [259072.836660] usbcore: registered new interface driver usb-storage [259072.836666] USB Mass Storage support registered. [259077.830410] usb-storage: device scan complete [259077.832343] scsi 5:0:0:0: CD-ROM SONY DDX-A1010 R1.0 PQ: 0 ANSI: 0 [259077.888167] sr1: scsi3-mmc drive: 0x/0x pop-up [259077.888446] sr 5:0:0:0: Attached scsi CD-ROM sr1 [259077.888593] sr 5:0:0:0: Attached scsi generic sg2 type 5 [259080.002079] sr 5:0:0:0: [sr1] Unhandled sense code [259080.002085] sr 5:0:0:0: [sr1] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [259080.002091] sr 5:0:0:0: [sr1] Sense Key : Blank Check [current] [259080.002097] sr 5:0:0:0: [sr1] Add. Sense: No additional sense information [259080.002104] sr 5:0:0:0: [sr1] CDB: Read(10): 28 00 00 00 00 00 00 00 02 00 00 00 [259080.002117] end_request: I/O error, dev sr1, sector 0 [259080.002123] Buffer I/O error on device sr1, logical block 0 [259080.002128] Buffer I/O error on device sr1, logical block 1 Those I/O errors don't look good, is there any hope?

  Read the article

• Automatically Kill/Restart Process(es) When Memory is Critically Low

  - by nemesisfixx

  I have a Debian Wheezy VPS box where am running a couple of Django apps in production. Ideally, would have tried addressed my current memory footprint issues by optimizing the apps, adding more RAM or augmenting with Swap. But the problem is that I doubt there's much memory optimization I'd milk from optimizing the Django apps (the stack being open-source and robust), and adding RAM is a cost constraint for me (this is a remote VPS), also, the host doesn't offer options to use Swap! So, in the meantime (as I wait to secure more resources to afford more RAM), I wish to mitigate the scenarios where the server runs out memory so that I just have to request a VPS restart (as in, at that point, I can't even SSH into the box!). So, what I would love in a solution is the ability to detect when a process (or generally, total system memory usage) exceeds a certain critical amount (for now, example the FREE RAM falls to say 10%) - which I've noticed occurs after the VPS's been up for long, and when also traffic is suddenly much to some of the heavy apps (most are just staging apps anyway). So, I wish to be able to kill/restart the offending process(es) - most likely Apache. Which solution when done manually in these situations has restored sane memory usage levels - a hint that possibly one or more of the Django apps has a memory leak? In brief: Monitor overall system RAM usage When FREE RAM falls below a given critical threshold (say below 10%), kill/restart the offending process(es) - or simpler, if we assume from my current log analysis (using linux-dash) that Apache is often the offender, then kill/restart it. Rinse and repeat...

  Read the article

• How to let MSN or Yahoo Messenger set you to be Invisible or Offline when you are idle for an hour?

  - by Jian Lin

  The short question is: How do we let MSN or Yahoo Messenger set us to be Invisible or Offline when we are idle for half an hour or an hour? The reason is: if I am on 24 hours a day, some people see me as weird. Some people see my value as low, because I am always there. There are ways to set me to "Away" or "Busy" after 10 minutes, but there seems to be no way to set myself to invisible or offline after 1 hour. As I am a software developer, I am very used to turning the computer on 24 hours a day. (for example, for checking email for urgent fixes, and fix issue and push to web server). We don't turn off computer usually even when we sleep, because we may sometimes can't sleep yet and come check on the computer, or wake up in the morning and immediately need to check if everything is ok. But, my MSN and Yahoo Messenger is always on for 24 hours a day, and I found that some girls start to ask me why I am always there 24 hours a day (even though they see me as away or busy, their feeling is that I am always there). What's more, I found that since I am always there, my value actually drop in their eyes, because hard to get = high value, and always there = low value. Some people feel me as having nothing much to do, always in front of computer, or what is he doing in front of computer so much? Now since it is my job, and I need to read emails once in a while, I am in fact in front of the computer more than some other people. I am in front of the computer maybe 10 hours a day, far from 24 hours a day. Is there an easy and automatic solution to this?

  Read the article

• VPS with Plesk, one ip, and godaddy (definely need help)

  - by Francesco

  Hi there, here's my situation : i've Plesk 8.3.0 with one IP and i've registered my domains at godaddy.com My problem : i cannot figure out how to configure plesk and godaddy to have my domains (6) properly working into the VPS. i've only one IP, so i can't have my personal NS and need to use godaddy ns. But.. how do i set all the stuff ? I've made a try but it's not working. Please take a look : This is an example of how the domain i'm actually working on is configured On Plesk : Host Record type Value 1.2.3.4 / 24 PTR mydomain.com. ftp.mydomain.com. CNAME mydomain.com. mail.mydomain.com. A 1.2.3.4 ns.mydomain.com. A 1.2.3.4 mydomain.com. NS ns.mydomain.com. mydomain.com. A 1.2.3.4 mydomain.com. MX (10) mail.mydomain.com. webmail.mydomain.com. A 1.2.3.4 www.mydomain.com. CNAME mydomain.com. On godaddy,(Total DNS Control) for the same domain i have this setup : A (Host) Host Points To TTL Actions * 1.2.3.4 1 Hour CNAMES (Aliases) Host Points To TTL Actions e email.secureserver.net 1 Hour email email.secureserver.net 1 Hour ftp @ 1 Hour imap imap.secureserver.net 1 Hour mail pop.secureserver.net 1 Hour mobilemail mobilemail-v01.prod.mesa1.secureserver.net 1 Hour pda mobilemail-v01.prod.mesa1.secureserver.net 1 Hour pop pop.secureserver.net 1 Hour smtp smtp.secureserver.net 1 Hour webmail webmail.secureserver.net 1 Hour www @ 1 Hour MX (Mail Exchange) Priority Host Goes To TTL Actions 10 @ mailstore1.secureserver.net 1 Hour 0 @ smtp.secureserver.net Host Points To TTL Actions @ ns53.domaincontrol.com @ ns54.domaincontrol.com What should i correct ? Thanks for helping me Francesco

  Read the article

• How do you handle data archiving?

  - by 20th Century Boy

  Backups are one thing, but long term archival is another. For example, you might be required to store emails for 7 years, or keep all project data indefinitely. I used to save archives to tape, but then I've had tapes get destroyed (drives rip the tape out). So...write to 2 tapes I hear you say. Is that what others do? Have 2 (or more) tapes of the same data for redundancy? But then the other issue is that tapes cannot usually be read by different backup software vendors. Eg if you go from Arcserve - Backup Exec - Commvault over 10 years you would need to keep all 3 systems so that you could restore old data. Likewise for hardware. Old tapes might not be barcoded. Might not be compatible with the new library etc etc. So do you keep old tape hardware AND old software just in case you might need to restore a 10 year-old file? Or...when you move to a new backup system do you migrate all archived data to the new system and re-archive it onto new tapes? That could be a huge job. Any thoughts?

  Read the article

• Limiting bandwith on an Windows 7 machine

  - by Mihai Damian

  I need to limit the bandwidth on my Windows 7 x64 machine. In the past (on XP) I've been able to use NetLimiter for similar tasks. However for some reason I can't get it to work anymore. For lower limits the bandwidth tests are able to exceed the limit by 10-50%; higher limits seem to be ignored completely and the bandwidth tests report download speeds of over 10 times the speed I set. I'm using speedtest.net and some similar service from my ISP for these tests. Anyway, I don't necessarily need a program as complex as NetLimiter since I only need to throttle my machine's bandwidth, not a specific program's. In case you are wondering why in the world I'd want to cripple my Internet speed, there is a funny story behind this. Long story short, my modem gets random disconnects. Tech support comes in, says my Internet speed is abnormally high and I must be using some tools to somehow make it go faster than it's supposed to and this messes up my modem. I check the connection with another computer and it seems that my PC is the only one in my network that gets abnormal speeds. I reinstall my OS, speed looks normal at first, after I install the batch of 50 or so updates, it goes back to abnormally high speeds and the disconnect problems are not solved. Now I don't have a clue if the explanation the tech team gave me was just a strategy to lay the blame on someone else, but I was trying to give them the benefit of the doubt and see what happens if I really reduce my speed to their specification. Any help appreciated.

  Read the article

• Only one domains not resolving via Windows DNS server at multiple locations, but is at others

  - by Brett G

  I'm having quite a weird issue. Had mail delivery issues to a specific domain. After looking closer, I realized that the DNS for that domain isn't resolving via the in-house Windows 2003 SP2 DNS server. C:\>nslookup foodmix.net Server: DC.DOMAIN.com Address: 10.1.1.1 DNS request timed out. timeout was 2 seconds. DNS request timed out. timeout was 2 seconds. *** Request to DC.DOMAIN.com timed-out (DC.DOMAIN.com and 10.1.1.1 are generic values to replace the actual ones) Even if I run this nslookup from the DC.DOMAIN.com server, I get the same result. However, all other requests are working as they should. I tried it on severs at completely separate organizations on different networks(Windows 2003 AD servers). The weird thing is some of these were having the same exact issue. However using public DNS servers work. I have tried clearing the DNS cache, restarting the server, restarting the services, etc. Nothing has worked. One weird event I noticed in the DNS Server Event Logs that might be related is an event ID of 5504 with the following description: The DNS server encountered an invalid domain name in a packet from 192.33.4.12. The packet will be rejected. The event data contains the DNS packet. For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp. In the data section below, I can see the following mentioned: ns2.webhostingstar.com Which happens to be the nameserver for the domain in question. Several discussion threads and a MS KB have pointed to disabling EDNS. I have done this via "dnscmd /config /enableednsprobes 0" and it has not fixed the issue.

  Read the article

< Previous Page | 430 431 432 433 434 435 436 437 438 439 440 441  | Next Page >