Search Results

Search found 19923 results on 797 pages for 'instance variables'.

Page 435/797 | < Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >

  • MySQL SSL: bad other signature confirmation

    - by samJL
    I am trying to enable SSL connections for MySQL-- SSL will show as enabled in MySQL, but I can't make any connections due to this error: ERROR 2026 (HY000): SSL connection error: ASN: bad other signature confirmation I am running the following: Ubuntu Version: 14.04.1 LTS (GNU/Linux 3.13.0-34-generic x86_64) MySQL Version: 5.5.38-0ubuntu0.14.04.1 OpenSSL Version: OpenSSL 1.0.1f 6 Jan 2014 I used these commands to generate my certificates (all generated in /etc/mysql): openssl genrsa -out ca-key.pem 2048 openssl req -new -x509 -nodes -days 3650 -key ca-key.pem -out ca-cert.pem -subj "/C=US/ST=NY/O=MyCompany/CN=ca" openssl req -newkey rsa:2048 -nodes -days 3650 -keyout server-key.pem -out server-req.pem -subj "/C=US/ST=NY/O=MyCompany/CN=server" openssl rsa -in server-key.pem -out server-key.pem openssl x509 -req -in server-req.pem -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 -out server-cert.pem openssl req -newkey rsa:2048 -nodes -days 3650 -keyout client-key.pem -out client-req.pem -subj "/C=US/ST=NY/O=MyCompany/CN=client" openssl rsa -in client-key.pem -out client-key.pem openssl x509 -req -in client-req.pem -CA ca-cert.pem -CAkey ca-key.pem -set_serial 01 -out client-cert.pem I put the following in my.cnf: [mysqld] ssl-ca=/etc/mysql/ca-cert.pem ssl-cert=/etc/mysql/server-cert.pem ssl-key=/etc/mysql/server-key.pem When I attempt to connect specifying the client certificates-- I get the following error: mysql -uroot -ppassword --ssl-ca=/etc/mysql/ca-cert.pem --ssl-cert=/etc/mysql/client-cert.pem --ssl-key=/etc/mysql/client-key.pem ERROR 2026 (HY000): SSL connection error: ASN: bad other signature confirmation If I connect without SSL, I can see that MySQL has correctly loaded the certificates: mysql -uroot -ppassword --ssl=false mysql> SHOW VARIABLES LIKE '%ssl%'; +---------------+----------------------------+ | Variable_name | Value | +---------------+----------------------------+ | have_openssl | YES | | have_ssl | YES | | ssl_ca | /etc/mysql/ca-cert.pem | | ssl_capath | | | ssl_cert | /etc/mysql/server-cert.pem | | ssl_cipher | | | ssl_key | /etc/mysql/server-key.pem | +---------------+----------------------------+ 7 rows in set (0.00 sec) My generated certificates pass OpenSSL verification and modulus: openssl verify -CAfile ca-cert.pem server-cert.pem client-cert.pem server-cert.pem: OK client-cert.pem: OK What am I missing? I used this same process before on a different server and it worked- however the Ubuntu version was 12.04 LTS and the OpenSSL version was older (don't remember specifically). Has something changed with the latest OpenSSL? Any help would be appreciated!

    Read the article

  • Is there really a need for encryption to have true wireless security? [closed]

    - by Cawas
    I welcome better key-wording here, both on tags and title. I'm trying to conceive a free, open and secure network environment that would work anywhere, from big enterprises to small home networks of just 1 machine. I think since wireless Access Points are the most, if not only, true weak point of a Local Area Network (let's not consider every other security aspect of having internet) there would be basically two points to consider here: Having an open AP for anyone to use the internet through Leaving the whole LAN also open for guests to be able to easily read (only) files on it, and even a place to drop files on Considering these two aspects, once everything is done properly... What's the most secure option between having that, or having just an encrypted password-protected wifi? Of course "both" would seem "more secure". But it shouldn't actually be anything substantial. That's the question, but I think it may need more elaborating on. If you don't think so, please feel free to skip the next (long) part. Elaborating more on the two aspects ... I've always had the feeling using any kind of the so called "wireless security" methods is actually a bad design. I'm talking mostly about encrypting and pass-phrasing (which are actually two different concepts), since I won't even consider hiding SSID and mac filtering. I understand it's a natural way of thinking. With cable networking nobody can access the network unless they have access to the physical cable, so you're "secure" in the physical way. In a way, encrypting is for wireless what building walls is for the cables. And giving pass-phrases would be adding a door with a key. But the cabling without encryption is also insecure. If someone plugin all the data is right there. So, while I can see the use for encrypting data, I don't think it's a security measure in wireless networks. It's wasting resources for too little gain. I believe we should encrypt only sensitive data regardless of wires. That's already done with HTTPS, so I don't really need to encrypt my torrents, for instance. They're torrents, they are meant to be freely shared! As for using passwords, they should be added to the users, always. Not to wifi. For securing files, truly, best solution is backup. Sure all that doesn't happen that often, but I won't consider the most situations where people just don't care. I think there are enough situations where we actually use passwords on our OS users, so let's go with that in mind. I keep promoting the Fonera concept as an instance. It opens up a free wifi port, if you choose so, and anyone can connect to the internet through that, without having any access to your LAN. It also uses a QoS which will never let your bandwidth drop from that public usage. That's security, and it's open. But it's lacking the second aspect. I'll probably be bashed for promoting the non-usage of WPA 2 with AES or whatever, but I wanted to know from more experienced (super) users out there: what do you think?

    Read the article

  • alias gcc='gcc -fpermissive' or modifying ./configure script

    - by robo
    I am compiling quite big project from source. The compilation always ends with: error: invalid conversion from ‘const char*’ to ‘char*’ [-fpermissive] I have already compiled this project one year ago. So I know a solution to this. Actualy I found more solutions: Adding a typecast to appropriate line of cpp code (It went to endless number of changes in each file. So I found next solution.) Modifying a makefile to compile that file with -fpermissive option. (I had to modify a lot of lines in each makefile. So I find even better solution.) "g++" or "gcc" was stored in a variable so I added -fpermissive to these variables. This is the best solution I have. It is sufficient to add this option to each makefile once. Unfortunately this software has big number of subdirectories. So I need to modify more than 100 makefiles. It took me whole day one year ago. Is there a way how to do this faster. What about this? alias gcc='gcc -fpermissive' I am not familiar with aliases. But it should be easy to try this. Is the syntax correct? And is this one correct? alias g++='g++ -fpermissive' ? And do I need to export the alias somehow? Will the make program respect the alias? Should I maybe change ./configure script? Or the ./configure.in? Or other file?

    Read the article

  • How does SELinux affect the /home directory?

    - by Matt Solnit
    Hi everyone. I'm migrating a CentOS 5.3 system from MySQL to PostgreSQL. The way our machine is set up is that the biggest disk partition is mounted to /home. This is out of my control and is managed by the hosting provider. Anyway, we obviously want the database files to be on /home for this reason. With MySQL, we did the following: Edited my.cnf and changed the datadir setting to /home/mysql Added a new "File type" policy record (I hope I'm using the right terminology) to set /home/mysql(/.*)? to mysqld_db_t Ran restorecon -R /home/mysql to assign the labels and everything was good. With PostgreSQL, however, I did the following: Edited /etc/init.d/postgresql and changed the PGDATA and PGLOG variables to /home/pgsql/data and /home/pgsql/pgstartup.log, respectively Added a new policy record to set /home/pgsql/pgstartup.log to postgresql_log_t Added a new policy record to set /home/pgsql/data(/.*)? to postgresql_db_t Ran restorecon -R /home/pgsql to assign the labels At this point, I still cannot start PostgreSQL. pgstartup.log says: # cat pgstartup.log postmaster cannot access the server configuration file "/home/pgsql/data/postgresql.conf": Permission denied The weird thing is that I don't see any messages related to this in /var/log/messages or /var/log/secure, but if I turn off SElinux, then everything works. I made sure all the permissions are correct (600 for files and 700 for directories), as well as the ownership (postgres:postgres). Can anyone tell me what I am doing wrong? I'm using the Yum repository from commandprompt.com, version 8.3.7. EDIT: The reason my question specifically mentions the /home directory is that if I go through all these steps for any other directory, e.g. /var/lib/pgsql2 or /usr/local/pgsql, then it works as expected.

    Read the article

  • Converting Lighttpd config to NginX with php-fpm

    - by Le Dude
    Having so much issue with NginX configuration since I'm new with NginX. Been using Lighttpd for quite sometime. Here are the base info. New Machine - CentOS 6.3 64 Bit - NginX 1.2.4-1.e16.ngx - Php-FPM 5.3.18-1.e16.remi Old Machine - CentOS 6.2 64Bit - Lighttpd 1.4.25-3.e16 Original Lighttpd config file: ####################################################################### ## ## /etc/lighttpd/lighttpd.conf ## ## check /etc/lighttpd/conf.d/*.conf for the configuration of modules. ## ####################################################################### ####################################################################### ## ## Some Variable definition which will make chrooting easier. ## ## if you add a variable here. Add the corresponding variable in the ## chroot example aswell. ## var.log_root = "/var/log/lighttpd" var.server_root = "/var/www" var.state_dir = "/var/run" var.home_dir = "/var/lib/lighttpd" var.conf_dir = "/etc/lighttpd" ## ## run the server chrooted. ## ## This requires root permissions during startup. ## ## If you run Chrooted set the the variables to directories relative to ## the chroot dir. ## ## example chroot configuration: ## #var.log_root = "/logs" #var.server_root = "/" #var.state_dir = "/run" #var.home_dir = "/lib/lighttpd" #var.vhosts_dir = "/vhosts" #var.conf_dir = "/etc" # #server.chroot = "/srv/www" ## ## Some additional variables to make the configuration easier ## ## ## Base directory for all virtual hosts ## ## used in: ## conf.d/evhost.conf ## conf.d/simple_vhost.conf ## vhosts.d/vhosts.template ## var.vhosts_dir = server_root + "/vhosts" ## ## Cache for mod_compress ## ## used in: ## conf.d/compress.conf ## var.cache_dir = "/var/cache/lighttpd" ## ## Base directory for sockets. ## ## used in: ## conf.d/fastcgi.conf ## conf.d/scgi.conf ## var.socket_dir = home_dir + "/sockets" ## ####################################################################### ####################################################################### ## ## Load the modules. include "modules.conf" ## ####################################################################### ####################################################################### ## ## Basic Configuration ## --------------------- ## server.port = 80 ## ## Use IPv6? ## #server.use-ipv6 = "enable" ## ## bind to a specific IP ## #server.bind = "localhost" ## ## Run as a different username/groupname. ## This requires root permissions during startup. ## server.username = "lighttpd" server.groupname = "lighttpd" ## ## enable core files. ## #server.core-files = "disable" ## ## Document root ## server.document-root = server_root + "/lighttpd" ## ## The value for the "Server:" response field. ## ## It would be nice to keep it at "lighttpd". ## #server.tag = "lighttpd" ## ## store a pid file ## server.pid-file = state_dir + "/lighttpd.pid" ## ####################################################################### ####################################################################### ## ## Logging Options ## ------------------ ## ## all logging options can be overwritten per vhost. ## ## Path to the error log file ## server.errorlog = log_root + "/error.log" ## ## If you want to log to syslog you have to unset the ## server.errorlog setting and uncomment the next line. ## #server.errorlog-use-syslog = "enable" ## ## Access log config ## include "conf.d/access_log.conf" ## ## The debug options are moved into their own file. ## see conf.d/debug.conf for various options for request debugging. ## include "conf.d/debug.conf" ## ####################################################################### ####################################################################### ## ## Tuning/Performance ## -------------------- ## ## corresponding documentation: ## http://www.lighttpd.net/documentation/performance.html ## ## set the event-handler (read the performance section in the manual) ## ## possible options on linux are: ## ## select ## poll ## linux-sysepoll ## ## linux-sysepoll is recommended on kernel 2.6. ## server.event-handler = "linux-sysepoll" ## ## The basic network interface for all platforms at the syscalls read() ## and write(). Every modern OS provides its own syscall to help network ## servers transfer files as fast as possible ## ## linux-sendfile - is recommended for small files. ## writev - is recommended for sending many large files ## server.network-backend = "linux-sendfile" ## ## As lighttpd is a single-threaded server, its main resource limit is ## the number of file descriptors, which is set to 1024 by default (on ## most systems). ## ## If you are running a high-traffic site you might want to increase this ## limit by setting server.max-fds. ## ## Changing this setting requires root permissions on startup. see ## server.username/server.groupname. ## ## By default lighttpd would not change the operation system default. ## But setting it to 2048 is a better default for busy servers. ## ## With SELinux enabled, this is denied by default and needs to be allowed ## by running the following once : setsebool -P httpd_setrlimit on server.max-fds = 2048 ## ## Stat() call caching. ## ## lighttpd can utilize FAM/Gamin to cache stat call. ## ## possible values are: ## disable, simple or fam. ## server.stat-cache-engine = "simple" ## ## Fine tuning for the request handling ## ## max-connections == max-fds/2 (maybe /3) ## means the other file handles are used for fastcgi/files ## server.max-connections = 1024 ## ## How many seconds to keep a keep-alive connection open, ## until we consider it idle. ## ## Default: 5 ## #server.max-keep-alive-idle = 5 ## ## How many keep-alive requests until closing the connection. ## ## Default: 16 ## #server.max-keep-alive-requests = 18 ## ## Maximum size of a request in kilobytes. ## By default it is unlimited (0). ## ## Uploads to your server cant be larger than this value. ## #server.max-request-size = 0 ## ## Time to read from a socket before we consider it idle. ## ## Default: 60 ## #server.max-read-idle = 60 ## ## Time to write to a socket before we consider it idle. ## ## Default: 360 ## #server.max-write-idle = 360 ## ## Traffic Shaping ## ----------------- ## ## see /usr/share/doc/lighttpd/traffic-shaping.txt ## ## Values are in kilobyte per second. ## ## Keep in mind that a limit below 32kB/s might actually limit the ## traffic to 32kB/s. This is caused by the size of the TCP send ## buffer. ## ## per server: ## #server.kbytes-per-second = 128 ## ## per connection: ## #connection.kbytes-per-second = 32 ## ####################################################################### ####################################################################### ## ## Filename/File handling ## ------------------------ ## ## files to check for if .../ is requested ## index-file.names = ( "index.php", "index.rb", "index.html", ## "index.htm", "default.htm" ) ## index-file.names += ( "index.xhtml", "index.html", "index.htm", "default.htm", "index.php" ) ## ## deny access the file-extensions ## ## ~ is for backupfiles from vi, emacs, joe, ... ## .inc is often used for code includes which should in general not be part ## of the document-root url.access-deny = ( "~", ".inc" ) ## ## disable range requests for pdf files ## workaround for a bug in the Acrobat Reader plugin. ## $HTTP["url"] =~ "\.pdf$" { server.range-requests = "disable" } ## ## url handling modules (rewrite, redirect) ## #url.rewrite = ( "^/$" => "/server-status" ) #url.redirect = ( "^/wishlist/(.+)" => "http://www.example.com/$1" ) ## ## both rewrite/redirect support back reference to regex conditional using %n ## #$HTTP["host"] =~ "^www\.(.*)" { # url.redirect = ( "^/(.*)" => "http://%1/$1" ) #} ## ## which extensions should not be handle via static-file transfer ## ## .php, .pl, .fcgi are most often handled by mod_fastcgi or mod_cgi ## static-file.exclude-extensions = ( ".php", ".pl", ".fcgi", ".scgi" ) ## ## error-handler for status 404 ## #server.error-handler-404 = "/error-handler.html" #server.error-handler-404 = "/error-handler.php" ## ## Format: <errorfile-prefix><status-code>.html ## -> ..../status-404.html for 'File not found' ## #server.errorfile-prefix = "/srv/www/htdocs/errors/status-" ## ## mimetype mapping ## include "conf.d/mime.conf" ## ## directory listing configuration ## include "conf.d/dirlisting.conf" ## ## Should lighttpd follow symlinks? ## server.follow-symlink = "enable" ## ## force all filenames to be lowercase? ## #server.force-lowercase-filenames = "disable" ## ## defaults to /var/tmp as we assume it is a local harddisk ## server.upload-dirs = ( "/var/tmp" ) ## ####################################################################### ####################################################################### ## ## SSL Support ## ------------- ## ## To enable SSL for the whole server you have to provide a valid ## certificate and have to enable the SSL engine.:: ## ## ssl.engine = "enable" ## ssl.pemfile = "/path/to/server.pem" ## ## The HTTPS protocol does not allow you to use name-based virtual ## hosting with SSL. If you want to run multiple SSL servers with ## one lighttpd instance you must use IP-based virtual hosting: :: ## ## $SERVER["socket"] == "10.0.0.1:443" { ## ssl.engine = "enable" ## ssl.pemfile = "/etc/ssl/private/www.example.com.pem" ## server.name = "www.example.com" ## ## server.document-root = "/srv/www/vhosts/example.com/www/" ## } ## ## If you have a .crt and a .key file, cat them together into a ## single PEM file: ## $ cat /etc/ssl/private/lighttpd.key /etc/ssl/certs/lighttpd.crt \ ## > /etc/ssl/private/lighttpd.pem ## #ssl.pemfile = "/etc/ssl/private/lighttpd.pem" ## ## optionally pass the CA certificate here. ## ## #ssl.ca-file = "" ## ####################################################################### ####################################################################### ## ## custom includes like vhosts. ## #include "conf.d/config.conf" #include_shell "cat /etc/lighttpd/vhosts.d/*.conf" ## ####################################################################### ####################################################################### ### Custom Added by me #url.rewrite-once = (".*\.(js|ico|gif|jpg|png|css|jar|class)$" => "$0", "" => "/index.php") url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) # expire.url = ( "" => "access 1 days" ) include "myvhost-vhosts.conf" ####################################################################### Here is my Vhost file for lighttpd $HTTP["host"] =~ "192.168.8.35$" { server.document-root = "/var/www/lighttpd/qc41022012/public" server.errorlog = "/var/log/lighttpd/error.log" accesslog.filename = "/var/log/lighttpd/access.log" server.error-handler-404 = "/e404.php" } and here is my nginx.conf file user nginx; worker_processes 5; error_log /var/log/nginx/error.log warn; pid /var/run/nginx.pid; events { worker_connections 1024; } http { include /etc/nginx/mime.types; default_type application/octet-stream; log_format main '$remote_addr - $remote_user [$time_local] "$request" ' '$status $body_bytes_sent "$http_referer" ' '"$http_user_agent" "$http_x_forwarded_for"'; access_log /var/log/nginx/testsite/logs/access.log main; sendfile on; #tcp_nopush on; keepalive_timeout 65; #gzip on; # include /etc/nginx/conf.d/*.conf; ## I added this ## include /etc/nginx/sites-available/*; } Here is my NginX Vhost file server { server_name 192.168.8.91; access_log /var/log/nginx/myapps/logs/access.log; error_log /var/log/nginx/myapps/logs/error.log; root /var/www/html/myapps/public; location / { index index.html index.htm index.php; } location = /favicon.ico { return 204; access_log off; log_not_found off; } # location ~ \.php$ { # try_files $uri /index.php; # include /etc/nginx/fastcgi_params; # fastcgi_pass 127.0.0.1:9000; # fastcgi_index index.php; # fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_param SCRIPT_NAME $fastcgi_script_name; location ~ \.php.*$ { rewrite ^(.*.php)/ $1 last; fastcgi_pass 127.0.0.1:9000; fastcgi_index index.php; include fastcgi_params; fastcgi_param SCRIPT_FILENAME $document_root$fastcgi_script_name; # fastcgi_intercept_errors on; # fastcgi_param SCRIPT_FILENAME $document_root/index.php; # fastcgi_param PATH_INFO $uri; # fastcgi_pass 127.0.0.1:9000; # include fastcgi_params; } } We have a custom apps that we created that works great with lighttpd. I went through some headache also when we were trying to figure out how to make it work with lighttpd. this is the line that helps make it work in lighttpd. url.rewrite-once = ( ".*\?(.*)$" => "/index.php?$1", "^/js/.*$" => "$0", "^.*\.(js|ico|gif|jpg|png|css|swf |jar|class)$" => "$0", "" => "/index.php" ) but I couldn't figure out how to make it works in NginX. The webserver run just fine when we use the phpinfo.php test file. However as soon as I point it to my apps, nothing comes up. Check the error.log file and there's no error. Very mind boggling. I spent over 1 week trying to figure it out with no luck.. Please help?

    Read the article

  • Have powershell zip the contents of a bunch of folders, individual zip for each folder

    - by WebDevHobo
    Recently, I asked how to do this with a .bat file and an answer was provided. for /D %%d in (*.*) do "C:\Program Files\7-Zip\7z\7za.exe" a -tzip %%d.zip %%d However, this proved useful only for folders that have no spaces in their name. The reason being that batch will do the following: if the folder name is "jef's vacation pics", the variables will be: %%d = jef's %%e = vacation %%f = pics And then it tries to pass only %%d to the 7-zip program, which will not find such a folder and therefor will not create a zip file. I've tried looking up some tutorials, documentation sites and such, but I haven't been able to come up with an answer. There may be an answer, but I want to take this opportunity to try my hand at powershell. I was thinking that a function with 1 argument, that being the parent-folder of the sub-folders that need to be zipped, would be the best approach. So here's what I have, which doesn't work, probably due to my general in-experience with powershell: function zipFolders($parent) { $zip = "C:\Program Files\7-Zip\7z\7za.exe"; $parents | ForEach-Object $zip a -tzip }

    Read the article

  • Strange performance issue with Dell R7610 and LSI 2208 RAID controller

    - by GregC
    Connecting controller to any of the three PCIe x16 slots yield choppy read performance around 750 MB/sec Lowly PCIe x4 slot yields steady 1.2 GB/sec read Given same files, same Windows Server 2008 R2 OS, same RAID6 24-disk Seagate ES.2 3TB array on LSI 9286-8e, same Dell R7610 Precision Workstation with A03 BIOS, same W5000 graphics card (no other cards), same settings etc. I see super-low CPU utilization in both cases. SiSoft Sandra reports x8 at 5GT/sec in x16 slot, and x4 at 5GT/sec in x4 slot, as expected. I'd like to be able to rely on the sheer speed of x16 slots. What gives? What can I try? Any ideas? Please assist Cross-posted from http://en.community.dell.com/support-forums/desktop/f/3514/t/19526990.aspx Follow-up information We did some more performance testing with reading from 8 SSDs, connected directly (without an expander chip). This means that both SAS cables were utilized. We saw nearly double performance, but it varied from run to run: {2.0, 1.8, 1.6, and 1.4 GB/sec were observed, then performance jumped back up to 2.0}. The SSD RAID0 tests were conducted in a x16 PCIe slot, all other variables kept the same. It seems to me that we were getting double the performance of HDD-based RAID6 array. Just for reference: maximum possible read burst speed over single channel of SAS 6Gb/sec is 570 MB/sec due to 8b/10b encoding and protocol limitations (SAS cable provides four such channels).

    Read the article

  • Monit won't run

    - by Yaniro
    I have two identical EC2 instances (the second is a replica of the first), running Gentoo. The first instance has monit running which monitors a single process and some system resources and functions great. In the second instance, monit runs but quits right away. The configuration is similar on both instances so are the versions of monit. monit.log shows: [GMT Oct 3 08:36:41] info : monit daemon with PID 5 awakened Final lines on strace monit show: write(2, "monit daemon with PID 5 awakened"..., 33monit daemon with PID 5 awakened ) = 33 time(NULL) = 1349252827 open("/etc/localtime", O_RDONLY) = 4 fstat64(4, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 fstat64(4, {st_mode=S_IFREG|0644, st_size=118, ...}) = 0 mmap2(NULL, 4096, PROT_READ|PROT_WRITE, MAP_PRIVATE|MAP_ANONYMOUS, -1, 0) = 0xb773a000 read(4, "TZif2\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\0\1\0\0\0\1\0\0\0\0"..., 4096) = 118 _llseek(4, -6, [112], SEEK_CUR) = 0 read(4, "\nGMT0\n", 4096) = 6 close(4) = 0 munmap(0xb773a000, 4096) = 0 write(3, "[GMT Oct 3 08:27:07] info :"..., 33) = 33 write(3, "monit daemon with PID 5 awakened"..., 33) = 33 waitpid(-1, NULL, WNOHANG) = -1 ECHILD (No child processes) close(3) = 0 exit_group(0) = ? No core dumps (ulimit -c shows unlimited) monit -v shows: monit: Debug: Adding host allow 'localhost' monit: Debug: Skipping redundant host 'localhost' monit: Debug: Skipping redundant host 'localhost' monit: Debug: Adding credentials for user 'xxxx'. Runtime constants: Control file = /etc/monitrc Log file = /var/log/monit/monit.log Pid file = /var/run/monit.pid Id file = /var/run/monit.pid Debug = True Log = True Use syslog = False Is Daemon = True Use process engine = True Poll time = 30 seconds with start delay 0 seconds Expect buffer = 256 bytes Event queue = base directory /var/monit with 100 slots Mail server(s) = xx.xxx.xx.xxx with timeout 30 seconds Mail from = (not defined) Mail subject = (not defined) Mail message = (not defined) Start monit httpd = True httpd bind address = Any/All httpd portnumber = 2812 httpd signature = True Use ssl encryption = False httpd auth. style = Basic Authentication and Host/Net allow list Alert mail to = [email protected] Alert on = All events The service list contains the following entries: System Name = xxxx Monitoring mode = active CPU wait limit = if greater than 20.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert CPU system limit = if greater than 30.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert CPU user limit = if greater than 70.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Swap usage limit = if greater than 25.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Memory usage limit = if greater than 75.0% 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Load avg. (5min) = if greater than 2.0 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Load avg. (1min) = if greater than 4.0 1 times within 1 cycle(s) then alert else if succeeded 1 times within 1 cycle(s) then alert Process Name = xxxx Group = server Pid file = /var/run/xxxx.pid Monitoring mode = active Start program = '/etc/init.d/xxxx restart' timeout 20 second(s) Stop program = '/etc/init.d/xxxx stop' timeout 30 second(s) Existence = if does not exist 1 times within 1 cycle(s) then restart else if succeeded 1 times within 1 cycle(s) then alert Pid = if changed 1 times within 1 cycle(s) then alert Ppid = if changed 1 times within 1 cycle(s) then alert Timeout = If restarted 3 times within 5 cycle(s) then unmonitor Alert mail to = [email protected] Alert on = All events Alert mail to = [email protected] Alert on = All events ------------------------------------------------------------------------------- monit daemon with PID 5 awakened Ran emerge --sync before emerge -va monit which installed monit v5.3.2. When that didn't work i've downloaded v5.5 from their website and compiled from source which did not work either.

    Read the article

  • Getting AWStats to work in Ubuntu 12.04

    - by koogee
    I'm new to apache and i'm trying to set up AWStats on my ubuntu 12.04 server. I've followed the guide at Ubuntu docs https://help.ubuntu.com/community/AWStats I set it up according to the instructions and awstats is able to generate initial stats from apache log successfully. I placed the links to awstats in the default virtual host file. However when I try to run http://server-ip-address:8080/awstats/awstats.pl, I get: Error: SiteDomain parameter not defined in your config/domain file. You must edit it for using this version of AWStats. Setup ('/etc/awstats/awstats.conf' file, web server or permissions) may be wrong. Check config file, permissions and AWStats documentation (in 'docs' directory). Here is my /etc/apache2/sites-available/default file: <VirtualHost *:8080> ServerAdmin webmaster@localhost DocumentRoot /home/saad/www <Directory /> Options FollowSymLinks AllowOverride None </Directory> <Directory /home/saad/www/> Options Indexes FollowSymLinks MultiViews AllowOverride AuthConfig Order allow,deny allow from all </Directory> ScriptAlias /cgi-bin/ /usr/lib/cgi-bin/ <Directory "/usr/lib/cgi-bin"> AllowOverride None Options +ExecCGI -MultiViews +SymLinksIfOwnerMatch Order allow,deny Allow from all </Directory> Alias /awstatsclasses "/usr/share/awstats/lib/" Alias /awstats-icon "/usr/share/awstats/icon/" Alias /awstatscss "/usr/share/doc/awstats/examples/css" ScriptAlias /awstats/ /usr/lib/cgi-bin/ Options ExecCGI -MultiViews +SymLinksIfOwnerMatch ErrorLog ${APACHE_LOG_DIR}/error.log # Possible values include: debug, info, notice, warn, error, crit, # alert, emerg. LogLevel warn CustomLog ${APACHE_LOG_DIR}/access.log combined Alias /doc/ "/usr/share/doc/" <Directory "/usr/share/doc/"> Options Indexes MultiViews FollowSymLinks AllowOverride None Order deny,allow Deny from all Allow from 127.0.0.0/255.0.0.0 ::1/128 </Directory> </VirtualHost> The only three variables I edited in /etc/awstats/awstats.conf are: LogFile="/var/log/apache2/access.log" SiteDomain="server-name.noip.org" HostAliases="localhost 127.0.0.1 server-name.no-ip.org" The apache server works fine and i'm able to access other pages stored on the server. Any guidance would be welcome.

    Read the article

  • Latency between IIS and SQL on same physical, two VMs

    - by Jerad Rose
    I have a single server (2x4 core CPUs, 32GB ram), that is a Windows Server 2012 Hyper V host, and it hosts two guest VMs (also Windows Server 2012 instances). One of them is a web server, the other is a SQL server. When hitting a page that loops over 50 records, there is noticeable latency. I capture/report the timings of each iteration on the loop, and each iteration is about 20-30 milliseconds. Of course, this amounts to over a second of latency for the whole loop. I thought maybe SQL needed to be tuned, but running profiler on it, the queries are showing almost 0 duration, so it seems the bottleneck is in transit between the two VMs. I have both VMs configured to use the actual NIC (vs. using a VNIC), so maybe that's part of my problem. Also, this is a classic ASP site, so it's using the SQL OLE DB provider, and I'm wondering if that is part of the problem. This is a new server setup, from an existing Windows 2003/IIS6 server setup where both web and DB run on the same server instance (no virtualization). On that setup, there is no such latency when looping over the cursor like this. But there are so many variables, I'm not sure where to start ruling things out.

    Read the article

  • hMail server - sending copy of an e-mail changing the sender

    - by Beggycev
    Dear All please help me with following request. I am using hMail server in a company(test.com) and have several hundred of guest e-mail accounts ([email protected]). I need to accomplish this: When any of the guest e-mails receives a message(either from internal or external sender) this e-mail(or its copy) is sent to another address "[email protected]" which is the same for all of these guest e-mails. But I need the sender to be identified as the [email protected] not as the original sender which happens when I use forwarding. I tried to prepare a simple VBS script using the OnAcceptMessage event to accomplish this. and it works on my testing machine without internet connectivity but not in the production environment. To be specific, if I send an e-mail to [email protected] in my test env it is delivered to the [email protected] with [email protected] being a sender. But in the production env the e-mail stays in the guest mailbox with the original sender. I am interested in any solution, using a rule in hMail or script, anything is welcome. Thank you for any help! The script: Sub OnAcceptMessage(oClient, oMessage) 'creating application object in order to perform operations as hMail server administrator Dim obApp Set obApp = CreateObject("hMailServer.Application") Dim adminLogin Dim adminPassword 'Enter actual values for administrator account and password 'CHANGE HERE: adminLogin = "Admin_login" adminPassword = "password" Call obApp.Authenticate(adminLogin, adminPassword) Dim addrStart 'Take first 5 characters of recipients address addrStart = Mid(oMessage.To, 1, 5) 'if the recipient's address start with "guest" if addrStart = "guest" then Dim recipient Dim recipientAddress 'enter name of the recipient and respective e-mail address() 'CHANGE HERE: recipient = "FINAL" recipientAddress = "[email protected]" 'change the sender and sender e-mail address to the guest oMessage.FromAddress = oMessage.To oMessage.From = oMessage.To & "<" & oMessage.To & ">" 'delete recipients and enter a new one - the actual mps and its e-mail from the variables set above oMessage.ClearRecipients() oMessage.AddRecipient recipient, recipientAddress 'save the e-mail oMessage.save end if End Sub

    Read the article

  • Cant connect to MySQL server from Java application

    - by RN
    This is on VPS\Centos server. The MySQL server is pre configured. I am running the Java application on Tomcat My Java web application is not able to connect to the MySQL server. I get an error - "Caused by: java.net.ConnectException: Connection refused" I suspect this to be a configuration problem rather than a coding problem- hence I have posted this on ServerFault And yes, The same web-app is able to connect to MySQL on a different linux box This is the URL that I provided to my Java application (note- it assumes default port) url = "jdbc:mysql://localhost/pickupgames" My first suspicion was that I am running on a non-default port So I tried to find the port where mySQL server is running I tried every trick mentioned in http://serverfault.com/questions/116100/how-to-check-what-port-mysql-is-running-on But no luck ! SHOW GLOBAL VARIABLES LIKE 'PORT'; This shows port 0 netstat -tlnp doesn't show mysql at all /etc/my.cnf It has no port entry telnet localhost 3306 Doesn't connect And in case you are wondering if mysql server is running at all or not It is And I know for sure, because I have been able to login using the mysql command Also # ps -ef|grep 'mysql' root 31839 27662 0 00:49 pts/3 00:00:00 grep mysql root 32452 1 0 Apr02 ? 00:00:00 /bin/sh /usr/bin/mysqld_safe --skip-grant-tables --skip-networking mysql 32504 32452 0 Apr02 ? 00:00:06 /usr/libexec/mysqld --basedir=/usr --datadir=/var/lib/mysql --user=mysql --pid-file=/var/run/mysqld/mysqld.pid --skip-external-locking --socket=/var/lib/mysql/mysql.sock --skip-grant-tables --skip-networking Please note the --skip-networking parameter Does this have something to do with the issue ? Any explanation why I cant connect to mysql server on port 3306 by telnet? Or why it docent show up under netstat? Any suggestion on whet I should try next ?

    Read the article

  • How to create an MST for silent install using Orca?

    - by Sanarothe
    Hi. I'm trying to deploy 7zip via GPO; I assigned the original MSI, but the package installation simply doesn't take place. What I've gathered is that I need to create an MST. In the spirit of trying to learn as much as possible about it, I've opted to use Orca rather than a third-party automagic tool, but I'm at a loss as to which fields to edit. So far the only change that I've made is to give the license accepted checkbox a value of "1" instead of pointing to another key that, still, just gave it a value of "1." So, to give this some structure, How does (Or what criteria should I consider) creating a MST make the install noninteractive/silent? Do you have to manually reconfigure the MSI to simply not perform the GUI aspects? Or do I have to execute the program in silent mode after defining the variables the the installer requests? (Though, of course, it seems that would defeat the purpose of the MST) How do I determine which fields I need to edit? I've loaded the installer and it takes three inputs: License acceptance, feature set and installation location. I want all of the default values: I'm just trying to deploy it at all, not customize the installation. I BELIEVE that I should be messing with some values in the Registry table, but I really don't know. If I'm not asking the right questions, can someone point me to a THOROUGH resource or documentation for this process? I've already gone over the technet articles on basic Orca use and deployment, but I couldn't really find anything on creating MST that didn't involve a third party program in which one runs a 'dummy' installer to get the before and after snapshots. Thank you very much, Cameron UPDATE: After spending the day troubleshooting, I finally got my server to send out 7zip, but not until I had also assigned firefox. Not sure why it didn't want to send out 7zip by itself, but I also had some domain naming problems. Thanks for the input (GPResult helped enormously.)

    Read the article

  • Apache 2.4 Prefork vs. PHP-FPM Event shows sig decrease in requests per second

    - by Mark
    On my Apache 2.4.2 server with a standard mod_php Prefork setup these are my server-status results Current Time: Wednesday, 24-Oct-2012 19:36:24 CDT Restart Time: Wednesday, 24-Oct-2012 01:27:30 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 18 hours 8 minutes 54 seconds Total accesses: 14304233 - Total Traffic: 342.3 GB CPU Usage: u12584.6 s721.93 cu.66 cs3.43 - 20.4% CPU load 219 requests/sec - 5.4 MB/second - 25.1 kB/request 507 requests currently being processed, 355 idle workers ______KKKKR_K______W_KKC___CKK_K_K_W__CC_KKK_KK._K_K_KK._KKKK_K_ K_____KK_KKKK_K_KK__K___KK_K___K_____CKKK_WK_K_____KCKK__K___K_K K_CK_K_K_____K__KKKK_K__K___K_KK_K_K_KKKCK____________KK_CK__KKK __C_KKKKKKK___CK___C_KKK_K__C__K_CK____KKK__K__K__K_K__KK_CK_K__ _KKKKK_K_W__KK______K___K__W___C_K__K____KKKKKKKK.KKKKKKKCK_K___ _C_KK_K_WK__K_KK__K__RK_KK___K____K_KK_K_K___RKC_KKKK___KKKC_K_W _C_KK_KK__W____KC__KKK__KKK___K___KKK_KK_K_KKW__K_KR_KK_KK__KKK_ R__KKK__KKKKKK__K_KKKKK_K__K_K___KKW_________KK_K___KKK___KK.K_C KKKKKKW_____K__K_KKC_KCKK_K_KK_K__KK__K___K__KK_KK__________KK__ __K___KK_K__K_C_KK_K___KK__KK__K__KCK_K__KK_________K_K_KK__.K__ K_CKK.CCRW__KKKKKKKKKKKC__W____K___KWK_KK_KKC______.K_K_KK_KKKC_ __KKK_W_KCKKK_K_K____CCCK__KC_KKKK_K____K_CK_K____K__K____KKK_KK KK___K_K_K__KW__KCKKKK____WKWK__K_KKRKK__C_K_KK_KK_K__KKCC_K__C_ KK_K___K_KK______K_____CKK_K_______KK_CKCK__KKKKK____K__K..K____ __KKWK_KW__KKK__K_KKK___K_KK_KKK__KK___KK___KK_KK___KK____KKWKKC KK_KKKK_................................` When I switch to a PHP-FPM setup with the Event MPM with no other variables changes, my requests/sec plummet and overall apache response is garbage. Current Time: Wednesday, 24-Oct-2012 19:51:21 CDT Restart Time: Wednesday, 24-Oct-2012 19:48:03 CDT Parent Server Config. Generation: 1 Parent Server MPM Generation: 0 Server uptime: 3 minutes 18 seconds Total accesses: 18720 - Total Traffic: 307.1 MB CPU Usage: u16.57 s4.74 cu0 cs0 - 10.8% CPU load 94.5 requests/sec - 1.6 MB/second - 16.8 kB/request 15 requests currently being processed, 49 idle workers PID Connections Threads Async connections total accepting busy idle writing keep-alive closing 11701 114 no 10 22 0 66 38 11702 134 no 5 27 0 81 48 Sum 248 15 49 0 147 86 __R_R__W___RRW________RR__R___W_W_______W_____W_____________R_R_ Is there any obvious reason anyone could think of why this would be the case. I can provide any other additional stats or server setup info to help out. Ive tried tweaking everything up and down and nothing really helps get the PHP-FPM setup anywhere near a baseic prefork/mod-php setup. Thanks!

    Read the article

  • ssh keys rejected each day

    - by EddyR
    I've had OpenSSH server running on my debian server for a couple weeks and all of a sudden now when I go to login the next day it rejects my ssh key and I have to manually add a new one each time. Not only that but I have the "tunneling with clear-text passwords" option enabled and the non-root (login with root is disabled) account for that is rejected too. I'm at a loss why this is happening and I can't find any ssh options that would explain it. --update-- I just changed debug level to DEBUG. But before that I'm seeing a lot of the following in auth.log Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session opened for user root by (uid=0) Feb 1 04:23:01 greenpages CRON[7213]: pam_unix(cron:session): session closed for user root ... Feb 1 04:36:26 greenpages sshd[7217]: reverse mapping checking getaddrinfo for nat-pool-xx-xx-xx-xx.myinternet.net [xx.xx.xx.xx] failed - POSSIBLE BREAK-IN ATTEMPT! ... Feb 1 04:37:31 greenpages sshd[7223]: Did not receive identification string from xx.xx.xx.xx ... My sshd_conf file settings are: # Package generated configuration file # See the sshd(8) manpage for details # What ports, IPs and protocols we listen for Port xxx # Use these options to restrict which interfaces/protocols sshd will bind to #ListenAddress :: #ListenAddress 0.0.0.0 Protocol 2 # HostKeys for protocol version 2 HostKey /etc/ssh/ssh_host_rsa_key HostKey /etc/ssh/ssh_host_dsa_key #Privilege Separation is turned on for security UsePrivilegeSeparation yes # Lifetime and size of ephemeral version 1 server key KeyRegenerationInterval 3600 ServerKeyBits 768 # Logging SyslogFacility AUTH LogLevel DEBUG # Authentication: LoginGraceTime 120 PermitRootLogin no StrictModes yes RSAAuthentication yes PubkeyAuthentication yes #AuthorizedKeysFile %h/.ssh/authorized_keys # Don't read the user's ~/.rhosts and ~/.shosts files IgnoreRhosts yes # For this to work you will also need host keys in /etc/ssh_known_hosts RhostsRSAAuthentication no # similar for protocol version 2 HostbasedAuthentication no # Uncomment if you don't trust ~/.ssh/known_hosts for RhostsRSAAuthentication #IgnoreUserKnownHosts yes # To enable empty passwords, change to yes (NOT RECOMMENDED) PermitEmptyPasswords no # Change to yes to enable challenge-response passwords (beware issues with # some PAM modules and threads) ChallengeResponseAuthentication no # Change to no to disable tunnelled clear text passwords PasswordAuthentication yes # Kerberos options #KerberosAuthentication no #KerberosGetAFSToken no #KerberosOrLocalPasswd yes #KerberosTicketCleanup yes # GSSAPI options #GSSAPIAuthentication no #GSSAPICleanupCredentials yes X11Forwarding no X11DisplayOffset 10 PrintMotd no PrintLastLog yes TCPKeepAlive yes #UseLogin no #MaxStartups 10:30:60 #Banner /etc/issue.net # Allow client to pass locale environment variables AcceptEnv LANG LC_* Subsystem sftp /usr/lib/openssh/sftp-server UsePAM no ClientAliveInterval 60 AllowUsers myuser

    Read the article

  • Alternate way to connect a vpn through a MIFI

    - by questor
    This has gotten to be a major problem at our company and depending on who I ask, the problem either does not really exist (mfr. and vendor) or is insoluble ( according to most users including techs who know how to prove their point). The problem involves getting a normal Windows 7 system to connect to a normal Server 2008 R2 Server over a cellular router (usually called a Mifi). A very few brands/models appear to work but the majority cannot make the connection. Since it is a cellular device, there are many variables that come into play and I wondered if anyone had ever found a consistent way to either make one work or else prove to the providers that their equipment was at fault. They all specifically state “VPN use” on the sales brochures. But few if any work. And those that do are not reliable. From a standpoint of pure knowledge, I just wondered if anyone knew the real reason why they fail? Pptp, L2tp, IPsec doesn’t matter. I have not tried Shrew or OpenVPN and am using strictly MS Windows protocols. Plenty of Google Searches back up my complaints but none seem to be any closer to knowing "why" they fail, just that they do. This is a "quest for knowledge"question. I don't expect a solution. Just a reason for the problem if anyone has any ideas.

    Read the article

  • Encoding over SSH Issues

    - by user1104160
    I have a Linux machine and a Windows machine, both using Vim with the Powerline plugin. They both work great with patched fonts. Next, I want to SSH onto an OSX 10.6 machine and also use the Powerline in the terminal with Vim. However, I get weird symbols with normal mode ("^^B" in one area) and fancy mode ("~@" and "~B" spread throughout the bar. I thought this mixup was an encoding issue, but when I look at Putty's encoding it is using UTF-8 and the same with the Ubuntu terminal. Additionally, on the OSX machine, "locale" returns "en_US.UTF-8" for all variables (I set it to do that in order to troubleshoot). However, the symbols are still showing. I am using a patched font (Inconsolata, the same one as the Ubuntu terminal) for the OSX terminal, so I am stumped. Is there a missing component to this equation? Are there additional problems that can arise from SSH encoding? On the OSX end, additionally, these same symbols appear, so it may not even be related to SSH and therefore I'm totally lost.

    Read the article

  • apache2 namevirtualhost resolving wrong site

    - by joe
    Running apache 2.2.6. I'm setting up a development environment. dev and production will be hosted on the same machine, same IP address. DNS entries like prod.domain.com and dev.domain.com point to the same IP. * Imprortant: it is required that dev and prod are otherwise completely separate. Each will run it's own apache instance. Each will use it's own apache configuration. Each, prod and dev, will host http and https. I have this set up and working, but not as restrictive as I'd like. For instance, the production config: NameVirtualHost *:80 NameVirtualHost *:443 <VirtualHost *:80 > ServerName prod.domain.com # ... etc </VirtualHost> <VirtualHost *:443 > ServerName prod.domain.com # ... etc </VirtualHost> The dev site is set up similarly, using ports 8080 and 4443. Each site works fine. But assuming both apaches are running, one can also hit "cross-site" by mistake. So, inadvertently hitting prod.domain.com:8080 successfully returns a page from the dev site. It would be much better if this failed completely. This is a bit more difficult to solve (for me) because of the need for two apache configs. If all in one, the single process would have full knowledge of everything. So, I tried to solve this with brute force, including virtual hosts for the "other" site, with something that would fail, like no access to documentroot. But apache then inexplicably finds the "wrong" virtual host. Here's the full config for production, with the dummy dev configs. NameVirtualHost *:80 NameVirtualHost *:443 # ---------------------------------------------- # DUMMY HOSTS <VirtualHost *:8080 > ServerName dev.domain.com:8080 DocumentRoot /tmp/ <Directory /tmp/ > Order deny,allow Deny from all </Directory> </VirtualHost> <VirtualHost *:4443 > ServerName dev.domain.com:4443 DocumentRoot /tmp/ <Directory /tmp/ > Order deny,allow Deny from all </Directory> </VirtualHost> # ---------------------------------------------- # REAL PRODUCTION HOSTS <VirtualHost *:80 > ServerName prod.domain.com:80 DocumentRoot /something/valid/ <Directory /something/valid/> Order allow,deny Allow from all </Directory> </VirtualHost> <VirtualHost *:443 > ServerName prod.domain.com:443 DocumentRoot /something/valid/ <Directory /something/valid/> Order allow,deny Allow from all </Directory> # .... other valid ssl setup </VirtualHost> Here's the strange thing. With this configuration, a prod.domain.com:80 hit succeeds. But a prod.domain.com:443 hit fails, because it finds the dev.domain.com:4443 instead. I've also tried removing the port from the ServerName, but it still doesn't work. Sorry for the long question. Hopefully this is enough information. Thanks in advance for any help.

    Read the article

  • How can I tell which page is creating a high-CPU-load httpd process?

    - by Greg
    I have a LAMP server (CentOS-based MediaTemple (DV) Extreme with 2GB RAM) running a customized Wordpress+bbPress combination . At about 30k pageviews per day the server is starting to groan. It stumbled earlier today for about 5 minutes when there was an influx of traffic. Even under normal conditions I can see that the virtual server is sometimes at 90%+ CPU load. Using Top I can often see 5-7 httpd processes that are each using 15-30% (and sometimes even 50%) CPU. Before we do a big optimization pass (our use of MySQL is probably the culprit) I would love to find the pages that are the main offenders and deal with them first. Is there a way that I can find out which specific requests were responsible for the most CPU-hungry httpd processes? I have found a lot of info on optimization in general, but nothing on this specific question. Secondly, I know there are a million variables, but if you have any insight on whether we should be at the boundaries of performance with a single dedicated virtual server with a site of this size, then I would love to hear your opinion. Should we be thinking about moving to a more powerful server, or should we be focused on optimization on the current server?

    Read the article

  • Prolific USB-to-Serial Comm Port significantly slower under Windows 7 comparing to Windows XP

    - by Dmitry S
    Not sure if this question should be asked here or on SuperUser but if we get an answer here it may be useful for others here I am using a Prolific USB-to-Serial adapter based on the Prolific chip to use with a device on serial port. I have the latest version of the driver installed: 1.3.0 (2010-7-15). When I use my device with this adapter on my main Windows 7 (32bit) system it takes 8-9 seconds to send a command through to the device. However, when I do the same thing on a different Windows XP system (an old laptop I borrowed for testing) it only takes 2-3 seconds. I have made sure that the port settings and other variables are the same between systems. I also tested on a third laptop (also running Windows 7) and again got a significant delay. So the question is if anyone else experienced the same problem and found a solution. I would like to avoid moving to an XP system for what I need to achieve so that's my last option. Thanks in advance.

    Read the article

  • Is it possible to get CCM Updates Schedule using Powershel or VBScript?

    - by frogman
    I want to be able to check the CCM Updates Schedule as seen in Configuration Manager Updates tab. I've been looking around on google and I've not been able to find a consistent answer to this. I tried to create a COM object using UDA.CCMUpdatesDeployment. This allows me to successfully set the recurring schedule with SetUserDefinedSchedule method. If I try to use GetUserDefinedSchedule I only get the original values of the variables. PS> $UD = New-Object -com "UDA.CCMUpdatesDeployment" PS> $A= 101 PS> $B= 102 PS> $UD.GetUserDefinedSchedule([ref]$A, [ref]$B) PS> $A 101 PS> $B 102 PS> $UD.GetUserDefinedSchedule MemberType : Method OverloadDefinitions : {void GetUserDefinedSchedule (Variant, Variant)} TypeNameOfValue : System.Management.Automation.PSMethod Value : void GetUserDefinedSchedule (Variant, Variant) Name : GetUserDefinedSchedule IsInstance : True I actually want to be able to do this remotely for a list of servers in a text file but right now any way would do.

    Read the article

  • Why is Automator crashing on launch?

    - by zbrimhall
    I've run into an odd problem where Automtor.app on Snow Leopard crashes on launch. At some point in the past, I put a copy of iPhoto.app into my public directory to copy over to another machine. Now, Automator.app won't run unless my public directory has a copy of iPhoto.app in it. If I remove it, Automator.app crashes on launch. Here's what happens: Launch Automator.app After the Automator menu bar appears, but before any windows appear, I get the dreaded beach ball for a few seconds Automator crashes Here's the output from Console.app: 12/26/09 2:11:24 PM Automator[11736] The action “Add Movie to iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Get iDVD Slideshow Images” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Initiate Remote Broadcast” could not be loaded because the application “QuickTime Broadcaster” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Movie Sequence” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New iDVD Slideshow” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “New QuickTime Slideshow” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set iDVD Background Image” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set iDVD Button Face” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie Annotations” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie Playback Properties” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Set Movie URL” could not be loaded because the application “QuickTime Player” was not found. 12/26/09 2:11:24 PM Automator[11736] The action “Show Main iDVD Menu” could not be loaded because the application “iDVD” was not found. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path The value %@ is invalid.: The file “The value %@ is invalid.” couldn’t be opened because there is no such file. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path /Users/brimhall/Public/iPhoto.app: The file “iPhoto.app” couldn’t be opened because there is no such file. 12/26/09 2:11:25 PM Automator[11736] Can not ID UTI for path The value %@ is invalid.: The file “The value %@ is invalid.” couldn’t be opened because there is no such file. 12/26/09 2:11:26 PM Automator[11736] -[NSAttributeDictionary length]: unrecognized selector sent to instance 0x49c770 12/26/09 2:11:26 PM Automator[11736] -[NSAttributeDictionary length]: unrecognized selector sent to instance 0x49c770 12/26/09 2:11:38 PM com.apple.launchd.peruser.501[203] ([0x0-0x2ad2ad].com.apple.Automator[11736]) Job appears to have crashed: Segmentation fault I've tried deleting my Automator.app Preferences file and Application Support directory to get it to look for iPhoto.app in the system-wide Applications directory, but to no avail. Any suggestions on how I can get things working as normal?

    Read the article

  • Problems with image/file upload in MediaWiki on Windows 2008 Server R2, using wrong temp directory

    - by Lasse V. Karlsen
    I have installed MediaWiki 1.15.2 under IIS as per the MediaWiki installation instructions for Windows 2008 Server. I have configured PHP to use a specific temp directory: upload_tmp_dir="C:\php\uploadtemp" I have specified that MediaWiki is allowed to upload: $wgEnableUploads = true; But when I try to upload an image, I get this error message in my browser: Internal error Could not find file "C:\Windows\Temp\php1AEA.tmp". Retrying will simply give me a new filename, but in the same location. The directory does not have any php* files in it, but since they're "temporary", they might be gone in a flash before Windows Explorer is able to show them so that might be a red herring. I've googled for this, and the most promising lead I found was on this page: Image upload problem - Is this bug fixed?, but since the text says "a bugfix was posted on the bug-report page", but provides no link to which bug page this relates to (php or mediawiki) nor the actual bug report, I've not found conclusively the bug report in question so that didn't help me much. Lots of pages indicates that this is a permission issue, so I tried setting permissions on c:\windows\temp as Modify by Everyone, still no dice. I tried changing the two system environment variables TEMP and TMP to point to C:\Temp instead, but MediaWiki still complains about not finding the file in C:\Windows\Temp. Note that I don't care a lot about where the files will actually be stored temporarily, so c:\windows\temp is fine by me. I do, however, care about them actually being uploaded correctly. Does anyone know of a fix, have any leads I can follow, or whatnot? The server is running Windows 2008 Server R2, all patches installed, and the PHP installed is 5.3.2, using IIS FastCGI.

    Read the article

  • How clean is deleting a computer object?

    - by Kevin
    Though quite skilled at software development, I'm a novice when it comes to Active Directory. I've noticed that AD seems to have a lot of stuff buried in the directory and schema which does not appear superficially when using simplified tools such as Active Directory Users and Computers. It kind of feels like the Windows registry, where COM classes have all kinds of intertwined references, many of which are purely by GUID, such that it's not enough to just search for anything referencing "GadgetXyz" by name in order to cleanly remove GadgetXyz. This occasionally leads to the uneasy feeling that I may have useless garbage building up in there which I have no idea how to weed out. For instance, I made the mistake a while back of trying to rename a DC, figuring I could just do it in the usual manner from Control Panel. I found references to the old name buried all over the place which made it impossible to reuse that name without considerable manual cleanup. Even long after I got it all working, I've stumbled upon the old name hidden away in LDAP. (There were no other DCs left in the picture at that time so I don't think it was a tombstone issue.) More specifically, I'm worried about the case of just outright deleting a computer from AD. I understand the cleanest way to do it is to log into the computer itself and tell it to leave the domain. (As an aside, doing this in Windows 8 seems to only disable the computer object and not delete it outright!) My concern is cases where this is not possible, for instance because it was on an already-deleted VM image. I can simply go into Active Directory Users and Computers, find the computer object, click it, and press Delete, and it seems to go away. My question is, is it totally, totally gone, or could this leave hanging references in any Active Directory nook or cranny I won't know to look in? (Excluding of course the expected tombstone records which expire after a set time.) If so, is there any good way to clean up the mess? Thank you for any insight! Kevin ps., It was over a year ago so I don't remember the exact details, but here's the gist of the DC renaming issue. I started with a single 2008 DC named ABC in a physical machine and wanted to end up instead with a DC of the same name running in a vSphere VM. Not wanting to mess with imaging the physical machine, my plan instead was: Rename ABC to XYZ. Fresh install 2008 on a VM, name it ABC, and join it to the domain. (I may have done the latter in the same step as promoting to DC; I don't recall.) dcpromo the new ABC as a 2nd DC, including GC. Make sure the new ABC replicated correctly from XYZ and then transfer the FSMO roles from XYZ to it. Once everything was confirmed to work with the new ABC alone, demote XYZ, remove the AD role, and remove it from the domain. Eventually I managed to do this but it was a much bumpier ride than expected. In particular, I got errors trying to join the new ABC to the domain. These included "The pre-windows 2000 name is already in use" and "No mapping between account names and security IDs was done." I eventually found that the computer object for XYZ had attributes that still referred to it as ABC. Among these were servicePrincipalName, msDS-AdditionalDnsHostName, and msDS-AdditionalSamAccountName. The latter I could not edit via Attribute Editor and instead had to run this against XYZ: NETDOM computername <simple-name> /add:<FQDN> There were some other hitches I don't remember exactly.

    Read the article

  • Acronis Disk Director AFTER Clone Disk error: PXE-E61: Media test failure, check cable

    - by Kairan
    Used Acronis Disk Director on my desktop, plugged in the laptop drive 240GB SSD (USB) and the new hard drive 500GB SSD (usb) and the copy seemed to be fine. I didnt see any error messages but I didnt stare at it for 3 hours either. The clone disk of course the Toshiba hidden restore partition, the primary partition C drive and the active (boot?) partition and yes, did check box for copy NT signature. The computer boots up fine most of the time, but it seems that when the computer goes to sleep (i believe its sleep, hard to do much testing during school) or hibernate or reboot it will sometimes display this message: Intel(R) Boot Agent GE v1.3.52 Copyright (C) 1997-2010, Intel Corporation PXE-E61: Media test failure, check cable PXE-M0F: Exiting Intel Boot Agent Insert system disk in drive. Press any key when ready... Of course any key does nothing but repeat a similar method. However, if I press the power button on the laptop (Toshiba Portege R705, Win 7 Pro 64-bit) it puts computer into hibernate. After hibernating I press power button again and it comes out of hibernation without any odd messages or problems described above... so apparently that is my TEMP fix. Another recent issue I noticed is on occasion when creating a new folder or modifying something in the system variables, other random areas I will get a message: "The Stub received bad data" and simply retry the task and it works. Perhaps these two issues are linked.

    Read the article

< Previous Page | 431 432 433 434 435 436 437 438 439 440 441 442  | Next Page >