Search Results

Search found 23127 results on 926 pages for 'based'.

Page 436/926 | < Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >

  • My Code Kata–A Solution Kata

    - by Glav
    There are many developers and coders out there who like to do code Kata’s to keep their coding ability up to scratch and to practice their skills. I think it is a good idea. While I like the concept, I find them dead boring and of minimal purpose. Yes, they serve to hone your skills but that’s about it. They are often quite abstract, in that they usually focus on a small problem set requiring specific solutions. It is fair enough as that is how they are designed but again, I find them quite boring. What I personally like to do is go for something a little larger and a little more fun. It takes a little more time and is not as easily executed as a kata though, but it services the same purposes from a practice perspective and allows me to continue to solve some problems that are not directly part of the initial goal. This means I can cover a broader learning range and have a bit more fun. If I am lucky, sometimes they even end up being useful tools. With that in mind, I thought I’d share my current ‘kata’. It is not really a code kata as it is too big. I prefer to think of it as a ‘solution kata’. The code is on bitbucket here. What I wanted to do was create a kind of simplistic virtual world where I can create a player, or a class, stuff it into the world, and see if it survives, and can navigate its way to the exit. Requirements were pretty simple: Must be able to define a map to describe the world using simple X,Y co-ordinates. Z co-ordinates as well if you feel like getting clever. Should have the concept of entrances, exists, solid blocks, and potentially other materials (again if you want to get clever). A coder should be able to easily write a class which will act as an inhabitant of the world. An inhabitant will receive stimulus from the world in the form of surrounding environment and be able to make a decision on action which it passes back to the ‘world’ for processing. At a minimum, an inhabitant will have sight and speed characteristics which determine how far they can ‘see’ in the world, and how fast they can move. Coders who write a really bad ‘inhabitant’ should not adversely affect the rest of world. Should allow multiple inhabitants in the world. So that was the solution I set out to act as a practice solution and a little bit of fun. It had some interesting problems to solve and I figured, if it turned out ok, I could potentially use this as a ‘developer test’ for interviews. Ask a potential coder to write a class for an inhabitant. Show the coder the map they will navigate, but also mention that we will use their code to navigate a map they have not yet seen and a little more complex. I have been playing with solution for a short time now and have it working in basic concepts. Below is a screen shot using a very basic console visualiser that shows the map, boundaries, blocks, entrance, exit and players/inhabitants. The yellow asterisks ‘*’ are the players, green ‘O’ the entrance, purple ‘^’ the exit, maroon/browny ‘#’ are solid blocks. The players can move around at different speeds, knock into each others, and make directional movement decisions based on what they see and who is around them. It has been quite fun to write and it is also quite fun to develop different players to inject into the world. The code below shows a really simple implementation of an inhabitant that can work out what to do based on stimulus from the world. It is pretty simple and just tries to move in some direction if there is nothing blocking the path. public class TestPlayer:LivingEntity { public TestPlayer() { Name = "Beta Boy"; LifeKey = Guid.NewGuid(); } public override ActionResult DecideActionToPerform(EcoDev.Core.Common.Actions.ActionContext actionContext) { try { var action = new MovementAction(); // move forward if we can if (actionContext.Position.ForwardFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.ForwardFacingPositions[0])) { action.DirectionToMove = MovementDirection.Forward; return action; } } if (actionContext.Position.LeftFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.LeftFacingPositions[0])) { action.DirectionToMove = MovementDirection.Left; return action; } } if (actionContext.Position.RearFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RearFacingPositions[0])) { action.DirectionToMove = MovementDirection.Back; return action; } } if (actionContext.Position.RightFacingPositions.Length > 0) { if (CheckAccessibilityOfMapBlock(actionContext.Position.RightFacingPositions[0])) { action.DirectionToMove = MovementDirection.Right; return action; } } return action; } catch (Exception ex) { World.WriteDebugInformation("Player: "+ Name, string.Format("Player Generated exception: {0}",ex.Message)); throw ex; } } private bool CheckAccessibilityOfMapBlock(MapBlock block) { if (block == null || block.Accessibility == MapBlockAccessibility.AllowEntry || block.Accessibility == MapBlockAccessibility.AllowExit || block.Accessibility == MapBlockAccessibility.AllowPotentialEntry) { return true; } return false; } } It is simple and it seems to work well. The world implementation itself decides the stimulus context that is passed to he inhabitant to make an action decision. All movement is carried out on separate threads and timed appropriately to be as fair as possible and to cater for additional skills such as speed, and eventually maybe stamina, strength, with actions like fighting. It is pretty fun to make up random maps and see how your inhabitant does. You can download the code from here. Along the way I have played with parallel extensions to make the compute intensive stuff spread across all cores, had to heavily factor in visibility of methods and properties so design of classes was paramount, work out movement algorithms that play fairly in the world and properly favour the players with higher abilities, as well as a host of other issues. So that is my ‘solution kata’. If I keep going with it, I may develop a web interface for it where people can upload assemblies and watch their player within a web browser visualiser and maybe even a map designer. What do you do to keep the fires burning?

    Read the article

  • The Shift: how Orchard painlessly shifted to document storage, and how it’ll affect you

    - by Bertrand Le Roy
    We’ve known it all along. The storage for Orchard content items would be much more efficient using a document database than a relational one. Orchard content items are composed of parts that serialize naturally into infoset kinds of documents. Storing them as relational data like we’ve done so far was unnatural and requires the data for a single item to span multiple tables, related through 1-1 relationships. This means lots of joins in queries, and a great potential for Select N+1 problems. Document databases, unfortunately, are still a tough sell in many places that prefer the more familiar relational model. Being able to x-copy Orchard to hosters has also been a basic constraint in the design of Orchard. Combine those with the necessity at the time to run in medium trust, and with license compatibility issues, and you’ll find yourself with very few reasonable choices. So we went, a little reluctantly, for relational SQL stores, with the dream of one day transitioning to document storage. We have played for a while with the idea of building our own document storage on top of SQL databases, and Sébastien implemented something more than decent along those lines, but we had a better way all along that we didn’t notice until recently… In Orchard, there are fields, which are named properties that you can add dynamically to a content part. Because they are so dynamic, we have been storing them as XML into a column on the main content item table. This infoset storage and its associated API are fairly generic, but were only used for fields. The breakthrough was when Sébastien realized how this existing storage could give us the advantages of document storage with minimal changes, while continuing to use relational databases as the substrate. public bool CommercialPrices { get { return this.Retrieve(p => p.CommercialPrices); } set { this.Store(p => p.CommercialPrices, value); } } This code is very compact and efficient because the API can infer from the expression what the type and name of the property are. It is then able to do the proper conversions for you. For this code to work in a content part, there is no need for a record at all. This is particularly nice for site settings: one query on one table and you get everything you need. This shows how the existing infoset solves the data storage problem, but you still need to query. Well, for those properties that need to be filtered and sorted on, you can still use the current record-based relational system. This of course continues to work. We do however provide APIs that make it trivial to store into both record properties and the infoset storage in one operation: public double Price { get { return Retrieve(r => r.Price); } set { Store(r => r.Price, value); } } This code looks strikingly similar to the non-record case above. The difference is that it will manage both the infoset and the record-based storages. The call to the Store method will send the data in both places, keeping them in sync. The call to the Retrieve method does something even cooler: if the property you’re looking for exists in the infoset, it will return it, but if it doesn’t, it will automatically look into the record for it. And if that wasn’t cool enough, it will take that value from the record and store it into the infoset for the next time it’s required. This means that your data will start automagically migrating to infoset storage just by virtue of using the code above instead of the usual: public double Price { get { return Record.Price; } set { Record.Price = value; } } As your users browse the site, it will get faster and faster as Select N+1 issues will optimize themselves away. If you preferred, you could still have explicit migration code, but it really shouldn’t be necessary most of the time. If you do already have code using QueryHints to mitigate Select N+1 issues, you might want to reconsider those, as with the new system, you’ll want to avoid joins that you don’t need for filtering or sorting, further optimizing your queries. There are some rare cases where the storage of the property must be handled differently. Check out this string[] property on SearchSettingsPart for example: public string[] SearchedFields { get { return (Retrieve<string>("SearchedFields") ?? "") .Split(new[] {',', ' '}, StringSplitOptions.RemoveEmptyEntries); } set { Store("SearchedFields", String.Join(", ", value)); } } The array of strings is transformed by the property accessors into and from a comma-separated list stored in a string. The Retrieve and Store overloads used in this case are lower-level versions that explicitly specify the type and name of the attribute to retrieve or store. You may be wondering what this means for code or operations that look directly at the database tables instead of going through the new infoset APIs. Even if there is a record, the infoset version of the property will win if it exists, so it is necessary to keep the infoset up-to-date. It’s not very complicated, but definitely something to keep in mind. Here is what a product record looks like in Nwazet.Commerce for example: And here is the same data in the infoset: The infoset is stored in Orchard_Framework_ContentItemRecord or Orchard_Framework_ContentItemVersionRecord, depending on whether the content type is versionable or not. A good way to find what you’re looking for is to inspect the record table first, as it’s usually easier to read, and then get the item record of the same id. Here is the detailed XML document for this product: <Data> <ProductPart Inventory="40" Price="18" Sku="pi-camera-box" OutOfStockMessage="" AllowBackOrder="false" Weight="0.2" Size="" ShippingCost="null" IsDigital="false" /> <ProductAttributesPart Attributes="" /> <AutoroutePart DisplayAlias="camera-box" /> <TitlePart Title="Nwazet Pi Camera Box" /> <BodyPart Text="[...]" /> <CommonPart CreatedUtc="2013-09-10T00:39:00Z" PublishedUtc="2013-09-14T01:07:47Z" /> </Data> The data is neatly organized under each part. It is easy to see how that document is all you need to know about that content item, all in one table. If you want to modify that data directly in the database, you should be careful to do it in both the record table and the infoset in the content item record. In this configuration, the record is now nothing more than an index, and will only be used for sorting and filtering. Of course, it’s perfectly fine to mix record-backed properties and record-less properties on the same part. It really depends what you think must be sorted and filtered on. In turn, this potentially simplifies migrations considerably. So here it is, the great shift of Orchard to document storage, something that Orchard has been designed for all along, and that we were able to implement with a satisfying and surprising economy of resources. Expect this code to make its way into the 1.8 version of Orchard when that’s available.

    Read the article

  • The Data Scientist

    - by BuckWoody
    A new term - well, perhaps not that new - has come up and I’m actually very excited about it. The term is Data Scientist, and since it’s new, it’s fairly undefined. I’ll explain what I think it means, and why I’m excited about it. In general, I’ve found the term deals at its most basic with analyzing data. Of course, we all do that, and the term itself in that definition is redundant. There is no science that I know of that does not work with analyzing lots of data. But the term seems to refer to more than the common practices of looking at data visually, putting it in a spreadsheet or report, or even using simple coding to examine data sets. The term Data Scientist (as far as I can make out this early in it’s use) is someone who has a strong understanding of data sources, relevance (statistical and otherwise) and processing methods as well as front-end displays of large sets of complicated data. Some - but not all - Business Intelligence professionals have these skills. In other cases, senior developers, database architects or others fill these needs, but in my experience, many lack the strong mathematical skills needed to make these choices properly. I’ve divided the knowledge base for someone that would wear this title into three large segments. It remains to be seen if a given Data Scientist would be responsible for knowing all these areas or would specialize. There are pretty high requirements on the math side, specifically in graduate-degree level statistics, but in my experience a company will only have a few of these folks, so they are expected to know quite a bit in each of these areas. Persistence The first area is finding, cleaning and storing the data. In some cases, no cleaning is done prior to storage - it’s just identified and the cleansing is done in a later step. This area is where the professional would be able to tell if a particular data set should be stored in a Relational Database Management System (RDBMS), across a set of key/value pair storage (NoSQL) or in a file system like HDFS (part of the Hadoop landscape) or other methods. Or do you examine the stream of data without storing it in another system at all? This is an important decision - it’s a foundation choice that deals not only with a lot of expense of purchasing systems or even using Cloud Computing (PaaS, SaaS or IaaS) to source it, but also the skillsets and other resources needed to care and feed the system for a long time. The Data Scientist sets something into motion that will probably outlast his or her career at a company or organization. Often these choices are made by senior developers, database administrators or architects in a company. But sometimes each of these has a certain bias towards making a decision one way or another. The Data Scientist would examine these choices in light of the data itself, starting perhaps even before the business requirements are created. The business may not even be aware of all the strategic and tactical data sources that they have access to. Processing Once the decision is made to store the data, the next set of decisions are based around how to process the data. An RDBMS scales well to a certain level, and provides a high degree of ACID compliance as well as offering a well-known set-based language to work with this data. In other cases, scale should be spread among multiple nodes (as in the case of Hadoop landscapes or NoSQL offerings) or even across a Cloud provider like Windows Azure Table Storage. In fact, in many cases - most of the ones I’m dealing with lately - the data should be split among multiple types of processing environments. This is a newer idea. Many data professionals simply pick a methodology (RDBMS with Star Schemas, NoSQL, etc.) and put all data there, regardless of its shape, processing needs and so on. A Data Scientist is familiar not only with the various processing methods, but how they work, so that they can choose the right one for a given need. This is a huge time commitment, hence the need for a dedicated title like this one. Presentation This is where the need for a Data Scientist is most often already being filled, sometimes with more or less success. The latest Business Intelligence systems are quite good at allowing you to create amazing graphics - but it’s the data behind the graphics that are the most important component of truly effective displays. This is where the mathematics requirement of the Data Scientist title is the most unforgiving. In fact, someone without a good foundation in statistics is not a good candidate for creating reports. Even a basic level of statistics can be dangerous. Anyone who works in analyzing data will tell you that there are multiple errors possible when data just seems right - and basic statistics bears out that you’re on the right track - that are only solvable when you understanding why the statistical formula works the way it does. And there are lots of ways of presenting data. Sometimes all you need is a “yes” or “no” answer that can only come after heavy analysis work. In that case, a simple e-mail might be all the reporting you need. In others, complex relationships and multiple components require a deep understanding of the various graphical methods of presenting data. Knowing which kind of chart, color, graphic or shape conveys a particular datum best is essential knowledge for the Data Scientist. Why I’m excited I love this area of study. I like math, stats, and computing technologies, but it goes beyond that. I love what data can do - how it can help an organization. I’ve been fortunate enough in my professional career these past two decades to work with lots of folks who perform this role at companies from aerospace to medical firms, from manufacturing to retail. Interestingly, the size of the company really isn’t germane here. I worked with one very small bio-tech (cryogenics) company that worked deeply with analysis of complex interrelated data. So  watch this space. No, I’m not leaving Azure or distributed computing or Microsoft. In fact, I think I’m perfectly situated to investigate this role further. We have a huge set of tools, from RDBMS to Hadoop to allow me to explore. And I’m happy to share what I learn along the way.

    Read the article

  • SQL SERVER – Weekly Series – Memory Lane – #032

    - by Pinal Dave
    Here is the list of selected articles of SQLAuthority.com across all these years. Instead of just listing all the articles I have selected a few of my most favorite articles and have listed them here with additional notes below it. Let me know which one of the following is your favorite article from memory lane. 2007 Complete Series of Database Coding Standards and Guidelines SQL SERVER Database Coding Standards and Guidelines – Introduction SQL SERVER – Database Coding Standards and Guidelines – Part 1 SQL SERVER – Database Coding Standards and Guidelines – Part 2 SQL SERVER Database Coding Standards and Guidelines Complete List Download Explanation and Example – SELF JOIN When all of the data you require is contained within a single table, but data needed to extract is related to each other in the table itself. Examples of this type of data relate to Employee information, where the table may have both an Employee’s ID number for each record and also a field that displays the ID number of an Employee’s supervisor or manager. To retrieve the data tables are required to relate/join to itself. Insert Multiple Records Using One Insert Statement – Use of UNION ALL This is very interesting question I have received from new developer. How can I insert multiple values in table using only one insert? Now this is interesting question. When there are multiple records are to be inserted in the table following is the common way using T-SQL. Function to Display Current Week Date and Day – Weekly Calendar Straight blog post with script to find current week date and day based on the parameters passed in the function.  2008 In my beginning years, I have almost same confusion as many of the developer had in their earlier years. Here are two of the interesting question which I have attempted to answer in my early year. Even if you are experienced developer may be you will still like to read following two questions: Order Of Column In Index Order of Conditions in WHERE Clauses Example of DISTINCT in Aggregate Functions Have you ever used DISTINCT with the Aggregation Function? Here is a simple example about how users can do it. Create a Comma Delimited List Using SELECT Clause From Table Column Straight to script example where I explained how to do something easy and quickly. Compound Assignment Operators SQL SERVER 2008 has introduced new concept of Compound Assignment Operators. Compound Assignment Operators are available in many other programming languages for quite some time. Compound Assignment Operators is operator where variables are operated upon and assigned on the same line. PIVOT and UNPIVOT Table Examples Here is a very interesting question – the answer to the question can be YES or NO both. “If we PIVOT any table and UNPIVOT that table do we get our original table?” Read the blog post to get the explanation of the question above. 2009 What is Interim Table – Simple Definition of Interim Table The interim table is a table that is generated by joining two tables and not the final result table. In other words, when two tables are joined they create an interim table as resultset but the resultset is not final yet. It may be possible that more tables are about to join on the interim table, and more operations are still to be applied on that table (e.g. Order By, Having etc). Besides, it may be possible that there is no interim table; sometimes final table is what is generated when the query is run. 2010 Stored Procedure and Transactions If Stored Procedure is transactional then, it should roll back complete transactions when it encounters any errors. Well, that does not happen in this case, which proves that Stored Procedure does not only provide just the transactional feature to a batch of T-SQL. Generate Database Script for SQL Azure When talking about SQL Azure the most common complaint I hear is that the script generated from stand-along SQL Server database is not compatible with SQL Azure. This was true for some time for sure but not any more. If you have SQL Server 2008 R2 installed you can follow the guideline below to generate a script which is compatible with SQL Azure. Convert IN to EXISTS – Performance Talk It is NOT necessary that every time when IN is replaced by EXISTS it gives better performance. However, in our case listed above it does for sure give better performance. You can read about this subject in the associated blog post. Subquery or Join – Various Options – SQL Server Engine Knows the Best Every single time whenever there is a performance tuning exercise, I hear the conversation from developer where some prefer subquery and some prefer join. In this two part blog post, I explain the same in the detail with examples. Part 1 | Part 2 Merge Operations – Insert, Update, Delete in Single Execution MERGE is a new feature that provides an efficient way to do multiple DML operations. In earlier versions of SQL Server, we had to write separate statements to INSERT, UPDATE, or DELETE data based on certain conditions; however, at present, by using the MERGE statement, we can include the logic of such data changes in one statement that even checks when the data is matched and then just update it, and similarly, when the data is unmatched, it is inserted. 2011 Puzzle – Statistics are not updated but are Created Once Here is the quick scenario about my setup. Create Table Insert 1000 Records Check the Statistics Now insert 10 times more 10,000 indexes Check the Statistics – it will be NOT updated – WHY? Question to You – When to use Function and When to use Stored Procedure Personally, I believe that they are both different things - they cannot be compared. I can say, it will be like comparing apples and oranges. Each has its own unique use. However, they can be used interchangeably at many times and in real life (i.e., production environment). I have personally seen both of these being used interchangeably many times. This is the precise reason for asking this question. 2012 In year 2012 I had two interesting series ran on the blog. If there is no fun in learning, the learning becomes a burden. For the same reason, I had decided to build a three part quiz around SEQUENCE. The quiz was to identify the next value of the sequence. I encourage all of you to take part in this fun quiz. Guess the Next Value – Puzzle 1 Guess the Next Value – Puzzle 2 Guess the Next Value – Puzzle 3 Guess the Next Value – Puzzle 4 Simple Example to Configure Resource Governor – Introduction to Resource Governor Resource Governor is a feature which can manage SQL Server Workload and System Resource Consumption. We can limit the amount of CPU and memory consumption by limiting /governing /throttling on the SQL Server. If there are different workloads running on SQL Server and each of the workload needs different resources or when workloads are competing for resources with each other and affecting the performance of the whole server resource governor is a very important task. Tricks to Replace SELECT * with Column Names – SQL in Sixty Seconds #017 – Video  Retrieves unnecessary columns and increases network traffic When a new columns are added views needs to be refreshed manually Leads to usage of sub-optimal execution plan Uses clustered index in most of the cases instead of using optimal index It is difficult to debug SQL SERVER – Load Generator – Free Tool From CodePlex The best part of this SQL Server Load Generator is that users can run multiple simultaneous queries again SQL Server using different login account and different application name. The interface of the tool is extremely easy to use and very intuitive as well. A Puzzle – Swap Value of Column Without Case Statement Let us assume there is a single column in the table called Gender. The challenge is to write a single update statement which will flip or swap the value in the column. For example if the value in the gender column is ‘male’ swap it with ‘female’ and if the value is ‘female’ swap it with ‘male’. Reference: Pinal Dave (http://blog.sqlauthority.com) Filed under: Memory Lane, PostADay, SQL, SQL Authority, SQL Query, SQL Server, SQL Tips and Tricks, T SQL, Technology

    Read the article

  • Recap: Oracle Fusion Middleware Strategies Driving Business Innovation

    - by Harish Gaur
    Hasan Rizvi, Executive Vice President of Oracle Fusion Middleware & Java took the stage on Tuesday to discuss how Oracle Fusion Middleware helps enable business innovation. Through a series of product demos and customer showcases, Hassan demonstrated how Oracle Fusion Middleware is a complete platform to harness the latest technological innovations (cloud, mobile, social and Fast Data) throughout the application lifecycle. Fig 1: Oracle Fusion Middleware is the foundation of business innovation This Session included 4 demonstrations to illustrate these strategies: 1. Build and deploy native mobile applications using Oracle ADF Mobile 2. Empower business user to model processes, design user interface and have rich mobile experience for process interaction using Oracle BPM Suite PS6. 3. Create collaborative user experience and integrate social sign-on using Oracle WebCenter Portal, Oracle WebCenter Content, Oracle Social Network & Oracle Identity Management 11g R2 4. Deploy and manage business applications on Oracle Exalogic Nike, LA Department of Water & Power and Nintendo joined Hasan on stage to share how their organizations are leveraging Oracle Fusion Middleware to enable business innovation. Managing Performance in the Wrld of Social and Mobile How do you provide predictable scalability and performance for an application that monitors active lifestyle of 8 million users on a daily basis? Nike’s answer is Oracle Coherence, a component of Oracle Fusion Middleware and Oracle Exadata. Fig 2: Oracle Coherence enabled data grid improves performance of Nike+ Digital Sports Platform Nicole Otto, Sr. Director of Consumer Digital Technology discussed the vision of the Nike+ platform, a platform which represents a shift for NIKE from a  "product"  to  a "product +" experience.  There are currently nearly 8 million users in the Nike+ system who are using digitally-enabled Nike+ devices.  Once data from the Nike+ device is transmitted to Nike+ application, users access the Nike+ website or via the Nike mobile applicatoin, seeing metrics around their daily active lifestyle and even engage in socially compelling experiences to compare, compete or collaborate their data with their friends. Nike expects the number of users to grow significantly this year which will drive an explosion of data and potential new experiences. To deal with this challenge, Nike envisioned building a shared platform that would drive a consumer-centric model for the company. Nike built this new platform using Oracle Coherence and Oracle Exadata. Using Coherence, Nike built a data grid tier as a distributed cache, thereby provide low-latency access to most recent and relevant data to consumers. Nicole discussed how Nike+ Digital Sports Platform is unique in the way that it utilizes the Coherence Grid.  Nike takes advantage of Coherence as a traditional cache using both cache-aside and cache-through patterns.  This new tier has enabled Nike to create a horizontally scalable distributed event-driven processing architecture. Current data grid volume is approximately 150,000 request per minute with about 40 million objects at any given time on the grid. Improving Customer Experience Across Multiple Channels Customer experience is on top of every CIO's mind. Customer Experience needs to be consistent and secure across multiple devices consumers may use.  This is the challenge Matt Lampe, CIO of Los Angeles Department of Water & Power (LADWP) was faced with. Despite being the largest utilities company in the country, LADWP had been relying on a 38 year old customer information system for serving its customers. Their prior system  had been unable to keep up with growing customer demands. Last year, LADWP embarked on a journey to improve customer experience for 1.6million LA DWP customers using Oracle WebCenter platform. Figure 3: Multi channel & Multi lingual LADWP.com built using Oracle WebCenter & Oracle Identity Management platform Matt shed light on his efforts to drive customer self-service across 3 dimensions – new website, new IVR platform and new bill payment service. LADWP has built a new portal to increase customer self-service while reducing the transactions via IVR. LADWP's website is powered Oracle WebCenter Portal and is accessible by desktop and mobile devices. By leveraging Oracle WebCenter, LADWP eliminated the need to build, format, and maintain individual mobile applications or websites for different devices. Their entire content is managed using Oracle WebCenter Content and secured using Oracle Identity Management. This new portal automated their paper based processes to web based workflows for customers. This includes automation of Self Service implemented through My Account -  like Bill Pay, Payment History, Bill History and Usage Analysis. LADWP's solution went live in April 2012. Matt indicated that LADWP's Self-Service Portal has greatly improved customer satisfaction.  In a JD Power Associates website satisfaction survey, results indicate rankings have climbed by 25+ points, marking a remarkable increase in user experience. Bolstering Performance and Simplifying Manageability of Business Applications Ingvar Petursson, Senior Vice Preisdent of IT at Nintendo America joined Hasan on-stage to discuss their choice of Exalogic. Nintendo had significant new requirements coming their way for business systems, both internal and external, in the years to come, especially with new products like the WiiU on the horizon this holiday season. Nintendo needed a platform that could give them performance, availability and ease of management as they deploy business systems. Ingvar selected Engineered Systems for two reasons: 1. High performance  2. Ease of management Figure 4: Nintendo relies on Oracle Exalogic to run ATG eCommerce, Oracle e-Business Suite and several business applications Nintendo made a decision to run their business applications (ATG eCommerce, E-Business Suite) and several Fusion Middleware components on the Exalogic platform. What impressed Ingvar was the "stress” testing results during evaluation. Oracle Exalogic could handle their 3-year load estimates for many functions, which was better than Nintendo expected without any hardware expansion. Faster Processing of Big Data Middleware plays an increasingly important role in Big Data. Last year, we announced at OpenWorld the introduction of Oracle Data Integrator for Hadoop and Oracle Loader for Hadoop which helps in the ability to move, transform, load data to and from Big Data Appliance to Exadata.  This year, we’ve added new capabilities to find, filter, and focus data using Oracle Event Processing. This product can natively integrate with Big Data Appliance or runs standalone. Hasan briefly discussed how NTT Docomo, largest mobile operator in Japan, leverages Oracle Event Processing & Oracle Coherence to process mobile data (from 13 million smartphone users) at a speed of 700K events per second before feeding it Hadoop for distributed processing of big data. Figure 5: Mobile traffic data processing at NTT Docomo with Oracle Event Processing & Oracle Coherence    

    Read the article

  • New ways for backup, recovery and restore of Essbase Block Storage databases – part 2 by Bernhard Kinkel

    - by Alexandra Georgescu
    After discussing in the first part of this article new options in Essbase for the general backup and restore, this second part will deal with the also rather new feature of Transaction Logging and Replay, which was released in version 11.1, enhancing existing restore options. Tip: Transaction logging and replay cannot be used for aggregate storage databases. Please refer to the Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1). Even if backups are done on a regular, frequent base, subsequent data entries, loads or calculations would not be reflected in a restored database. Activating Transaction Logging could fill that gap and provides you with an option to capture these post-backup transactions for later replay. The following table shows, which are the transactions that could be logged when Transaction Logging is enabled: In order to activate its usage, corresponding statements could be added to the Essbase.cfg file, using the TRANSACTIONLOGLOCATION command. The complete syntax reads: TRANSACTIONLOGLOCATION [ appname [ dbname]] LOGLOCATION NATIVE ?ENABLE | DISABLE Where appname and dbname are optional parameters giving you the chance in combination with the ENABLE or DISABLE command to set Transaction Logging for certain applications or databases or to exclude them from being logged. If only an appname is specified, the setting applies to all databases in that particular application. If appname and dbname are not defined, all applications and databases would be covered. LOGLOCATION specifies the directory to which the log is written, e.g. D:\temp\trlogs. This directory must already exist or needs to be created before using it for log information being written to it. NATIVE is a reserved keyword that shouldn’t be changed. The following example shows how to first enable logging on a more general level for all databases in the application Sample, followed by a disabling statement on a more granular level for only the Basic database in application Sample, hence excluding it from being logged. TRANSACTIONLOGLOCATION Sample Hyperion/trlog/Sample NATIVE ENABLE TRANSACTIONLOGLOCATION Sample Basic Hyperion/trlog/Sample NATIVE DISABLE Tip: After applying changes to the configuration file you must restart the Essbase server in order to initialize the settings. A maybe required replay of logged transactions after restoring a database can be done only by administrators. The following options are available: In Administration Services selecting Replay Transactions on the right-click menu on the database: Here you can select to replay transactions logged after the last replay request was originally executed or after the time of the last restored backup (whichever occurred later) or transactions logged after a specified time. Or you can replay transactions selectively based on a range of sequence IDs, which can be accessed using Display Transactions on the right-click menu on the database: These sequence ID s (0, 1, 2 … 7 in the screenshot below) are assigned to each logged transaction, indicating the order in which the transaction was performed. This helps to ensure the integrity of the restored data after a replay, as the replay of transactions is enforced in the same order in which they were originally performed. So for example a calculation originally run after a data load cannot be replayed before having replayed the data load first. After a transaction is replayed, you can replay only transactions with a greater sequence ID. For example, replaying the transaction with sequence ID of 4 includes all preceding transactions, while afterwards you can only replay transactions with a sequence ID of 5 or greater. Tip: After restoring a database from a backup you should always completely replay all logged transactions, which were executed after the backup, before executing new transactions. But not only the transaction information itself needs to be logged and stored in a specified directory as described above. During transaction logging, Essbase also creates archive copies of data load and rules files in the following default directory: ARBORPATH/app/appname/dbname/Replay These files are then used during the replay of a logged transaction. By default Essbase archives only data load and rules files for client data loads, but in order to specify the type of data to archive when logging transactions you can use the command TRANSACTIONLOGDATALOADARCHIVE as an additional entry in the Essbase.cfg file. The syntax for the statement is: TRANSACTIONLOGDATALOADARCHIVE [appname [dbname]] [OPTION] While to the [appname [dbname]] argument the same applies like before for TRANSACTIONLOGLOCATION, the valid values for the OPTION argument are the following: Make the respective setting for which files copies should be logged, considering from which location transactions are usually taking place. Selecting the NONE option prevents Essbase from saving the respective files and the data load cannot be replayed. In this case you must first manually load the data before you can replay the transactions. Tip: If you use server or SQL data and the data and rules files are not archived in the Replay directory (for example, you did not use the SERVER or SERVER_CLIENT option), Essbase replays the data that is actually in the data source at the moment of the replay, which may or may not be the data that was originally loaded. You can find more detailed information in the following documents: Oracle Hyperion Enterprise Performance Management System Backup and Recovery Guide (rel. 11.1.2.1) Oracle Essbase Online Documentation (rel. 11.1.2.1)) Enterprise Performance Management System Documentation (including previous releases) Or on the Oracle Technology Network. If you are also interested in other new features and smart enhancements in Essbase or Hyperion Planning stay tuned for coming articles or check our training courses and web presentations. You can find general information about offerings for the Essbase and Planning curriculum or other Oracle-Hyperion products here; (please make sure to select your country/region at the top of this page) or in the OU Learning paths section, where Planning, Essbase and other Hyperion products can be found under the Fusion Middleware heading (again, please select the right country/region). Or drop me a note directly: [email protected]. About the Author: Bernhard Kinkel started working for Hyperion Solutions as a Presales Consultant and Consultant in 1998 and moved to Hyperion Education Services in 1999. He joined Oracle University in 2007 where he is a Principal Education Consultant. Based on these many years of working with Hyperion products he has detailed product knowledge across several versions. He delivers both classroom and live virtual courses. His areas of expertise are Oracle/Hyperion Essbase, Oracle Hyperion Planning and Hyperion Web Analysis. Disclaimer: All methods and features mentioned in this article must be considered and tested carefully related to your environment, processes and requirements. As guidance please always refer to the available software documentation. This article does not recommend or advise any explicit action or change, hence the author cannot be held responsible for any consequences due to the use or implementation of these features.

    Read the article

  • Java JRE 1.7.0_45 Certified with Oracle E-Business Suite

    - by Steven Chan (Oracle Development)
    Java Runtime Environment 7u45 (a.k.a. JRE 7u45-b18) and later updates on the JRE 7 codeline are now certified with Oracle E-Business Suite Release 11i and 12.0, 12.1, and 12.2 for Windows-based desktop clients. Effects of new support dates on Java upgrades for EBS environments Support dates for the E-Business Suite and Java have changed.  Please review the sections below for more details: What does this mean for Oracle E-Business Suite users? Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? All JRE 6 and 7 releases are certified with EBS upon release Our standard policy is that all E-Business Suite customers can apply all JRE updates to end-user desktops from JRE 1.6.0_03 and later updates on the 1.6 codeline, and from JRE 7u10 and later updates on the JRE 7 codeline.  We test all new JRE 1.6 and JRE 7 releases in parallel with the JRE development process, so all new JRE 1.6 and 7 releases are considered certified with the E-Business Suite on the same day that they're released by our Java team.  You do not need to wait for a certification announcement before applying new JRE 1.6 or JRE 7 releases to your EBS users' desktops. What's needed to enable EBS environments for JRE 7? EBS customers should ensure that they are running JRE 7u17, at minimum, on Windows desktop clients. Of the compatibility issues identified with JRE 7, the most critical is an issue that prevents E-Business Suite Forms-based products from launching on Windows desktops that are running JRE 7.  Customers can prevent this issue -- and all other JRE 7 compatibility issues -- by ensuring that they have applied the latest certified patches documented for JRE 7 configurations to their EBS application tier servers.  These patches are compatible with JRE 6 and 7, production ready, and fully-tested with the E-Business Suite.  These patches may be applied immediately to all E-Business Suite environments. All other Forms prerequisites documented in the Notes above should also be applied.  Where are the official patch requirements documented? All patches required for ensuring full compatibility of the E-Business Suite with JRE 7 are documented in these Notes: For EBS 11i: Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 11i (Note 290807.1) Upgrading Developer 6i with Oracle E-Business Suite 11i (Note 125767.1) For EBS 12.0, 12.1, 12.2 Deploying Sun JRE (Native Plug-in) for Windows Clients in Oracle E-Business Suite Release 12 (Note 393931.1) Upgrading OracleAS 10g Forms and Reports in Oracle E-Business Suite Release 12 (Note 437878.1) EBS + Discoverer 11g Users JRE 1.7.0_45 is certified for Discoverer 11g in E-Business Suite environments with the following minimum requirements: Discoverer (11g) 11.1.1.6 plus Patch 13877486 and later  Reference: How To Find Oracle BI Discoverer 10g and 11g Certification Information (Document 233047.1) Worried about the 'mismanaged session cookie' issue? No need to worry -- it's fixed.  To recap: JRE releases 1.6.0_18 through 1.6.0_22 had issues with mismanaging session cookies that affected some users in some circumstances. The fix for those issues was first included in JRE 1.6.0_23. These fixes will carry forward and continue to be fixed in all future JRE releases on the JRE 6 and 7 codelines.  In other words, if you wish to avoid the mismanaged session cookie issue, you should apply any release after JRE 1.6.0_22 on the JRE 6 codeline, and JRE 7u10 and later JRE 7 codeline updates. Implications of Java 6 End of Public Updates for EBS Users The Support Roadmap for Oracle Java is published here: Oracle Java SE Support Roadmap The latest updates to that page (as of Sept. 19, 2012) state (emphasis added): Java SE 6 End of Public Updates Notice After February 2013, Oracle will no longer post updates of Java SE 6 to its public download sites. Existing Java SE 6 downloads already posted as of February 2013 will remain accessible in the Java Archive on Oracle Technology Network. Developers and end-users are encouraged to update to more recent Java SE versions that remain available for public download. For enterprise customers, who need continued access to critical bug fixes and security fixes as well as general maintenance for Java SE 6 or older versions, long term support is available through Oracle Java SE Support . What does this mean for Oracle E-Business Suite users? EBS users fall under the category of "enterprise users" above.  Java is an integral part of the Oracle E-Business Suite technology stack, so EBS users will continue to receive Java SE 6 updates from February 2013 to the end of Java SE 6 Extended Support in June 2017. In other words, nothing changes for EBS users after February 2013.  EBS users will continue to receive critical bug fixes and security fixes as well as general maintenance for Java SE 6 until the end of Java SE 6 Extended Support in June 2017. How can EBS customers obtain Java 6 updates after the public end-of-life? EBS customers can download Java 6 patches from My Oracle Support.  For a complete list of all Java SE patch numbers, see: All Java SE Downloads on MOS (Note 1439822.1) Will EBS users be forced to upgrade to JRE 7 for Windows desktop clients? This upgrade is highly recommended but remains optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JRE 6 desktop clients.  Java 6 is covered by Extended Support until June 2017.  All E-Business Suite customers must upgrade to JRE 7 by June 2017. Coexistence of JRE 6 and JRE 7 on Windows desktops The upgrade to JRE 7 is highly recommended for EBS users, but some users may need to run both JRE 6 and 7 on their Windows desktops for reasons unrelated to the E-Business Suite. Most EBS configurations with IE and Firefox use non-static versioning by default. JRE 7 will be invoked instead of JRE 6 if both are installed on a Windows desktop. For more details, see "Appendix B: Static vs. Non-static Versioning and Set Up Options" in Notes 290807.1 and 393931.1. Applying Updates to JRE 6 and JRE 7 to Windows desktops Auto-update will keep JRE 7 up-to-date for Windows users with JRE 7 installed. Auto-update will only keep JRE 7 up-to-date for Windows users with both JRE 6 and 7 installed.  JRE 6 users are strongly encouraged to apply the latest Critical Patch Updates as soon as possible after each release. The Jave SE CPUs will be available via My Oracle Support.  EBS users can find more information about JRE 6 and 7 updates here: Information Center: Installation & Configuration for Oracle Java SE (Note 1412103.2) The dates for future Java SE CPUs can be found on the Critical Patch Updates, Security Alerts and Third Party Bulletin.  An RSS feed is available on that site for those who would like to be kept up-to-date. What do Mac users need? Mac users running Mac OS 10.7 or 10.8 can run JRE 7 plug-ins.  See this article: EBS 12 certified with Mac OS X 10.7 and 10.8 with Safari 6 and JRE 7 Will EBS users be forced to upgrade to JDK 7 for EBS application tier servers? JRE is used for desktop clients.  JDK is used for application tier servers JDK upgrades for E-Business Suite application tier servers are highly recommended but currently remain optional while Java 6 is covered by Extended Support. Updates will be delivered via My Oracle Support, where you can continue to receive critical bug fixes and security fixes as well as general maintenance for JDK 6 for application tier servers.  Java SE 6 is covered by Extended Support until June 2017.  All EBS customers with application tier servers on Windows, Solaris, and Linux must upgrade to JDK 7 by June 2017. EBS customers running their application tier servers on other operating systems should check with their respective vendors for the support dates for those platforms. JDK 7 is certified with E-Business Suite 12.  See: Java (JDK) 7 Certified for E-Business Suite 12 Servers References Recommended Browsers for Oracle Applications 11i (Metalink Note 285218.1) Upgrading Sun JRE (Native Plug-in) with Oracle Applications 11i for Windows Clients (Metalink Note 290807.1) Recommended Browsers for Oracle Applications 12 (MetaLink Note 389422.1) Upgrading JRE Plugin with Oracle Applications R12 (MetaLink Note 393931.1) Related Articles Mismanaged Session Cookie Issue Fixed for EBS in JRE 1.6.0_23 Roundup: Oracle JInitiator 1.3 Desupported for EBS Customers in July 2009

    Read the article

  • WebSocket Applications using Java: JSR 356 Early Draft Now Available (TOTD #183)

    - by arungupta
    WebSocket provide a full-duplex and bi-directional communication protocol over a single TCP connection. JSR 356 is defining a standard API for creating WebSocket applications in the Java EE 7 Platform. This Tip Of The Day (TOTD) will provide an introduction to WebSocket and how the JSR is evolving to support the programming model. First, a little primer on WebSocket! WebSocket is a combination of IETF RFC 6455 Protocol and W3C JavaScript API (still a Candidate Recommendation). The protocol defines an opening handshake and data transfer. The API enables Web pages to use the WebSocket protocol for two-way communication with the remote host. Unlike HTTP, there is no need to create a new TCP connection and send a chock-full of headers for every message exchange between client and server. The WebSocket protocol defines basic message framing, layered over TCP. Once the initial handshake happens using HTTP Upgrade, the client and server can send messages to each other, independent from the other. There are no pre-defined message exchange patterns of request/response or one-way between client and and server. These need to be explicitly defined over the basic protocol. The communication between client and server is pretty symmetric but there are two differences: A client initiates a connection to a server that is listening for a WebSocket request. A client connects to one server using a URI. A server may listen to requests from multiple clients on the same URI. Other than these two difference, the client and server behave symmetrically after the opening handshake. In that sense, they are considered as "peers". After a successful handshake, clients and servers transfer data back and forth in conceptual units referred as "messages". On the wire, a message is composed of one or more frames. Application frames carry payload intended for the application and can be text or binary data. Control frames carry data intended for protocol-level signaling. Now lets talk about the JSR! The Java API for WebSocket is worked upon as JSR 356 in the Java Community Process. This will define a standard API for building WebSocket applications. This JSR will provide support for: Creating WebSocket Java components to handle bi-directional WebSocket conversations Initiating and intercepting WebSocket events Creation and consumption of WebSocket text and binary messages The ability to define WebSocket protocols and content models for an application Configuration and management of WebSocket sessions, like timeouts, retries, cookies, connection pooling Specification of how WebSocket application will work within the Java EE security model Tyrus is the Reference Implementation for JSR 356 and is already integrated in GlassFish 4.0 Promoted Builds. And finally some code! The API allows to create WebSocket endpoints using annotations and interface. This TOTD will show a simple sample using annotations. A subsequent blog will show more advanced samples. A POJO can be converted to a WebSocket endpoint by specifying @WebSocketEndpoint and @WebSocketMessage. @WebSocketEndpoint(path="/hello")public class HelloBean {     @WebSocketMessage    public String sayHello(String name) {         return "Hello " + name + "!";     }} @WebSocketEndpoint marks this class as a WebSocket endpoint listening at URI defined by the path attribute. The @WebSocketMessage identifies the method that will receive the incoming WebSocket message. This first method parameter is injected with payload of the incoming message. In this case it is assumed that the payload is text-based. It can also be of the type byte[] in case the payload is binary. A custom object may be specified if decoders attribute is specified in the @WebSocketEndpoint. This attribute will provide a list of classes that define how a custom object can be decoded. This method can also take an optional Session parameter. This is injected by the runtime and capture a conversation between two endpoints. The return type of the method can be String, byte[] or a custom object. The encoders attribute on @WebSocketEndpoint need to define how a custom object can be encoded. The client side is an index.jsp with embedded JavaScript. The JSP body looks like: <div style="text-align: center;"> <form action="">     <input onclick="say_hello()" value="Say Hello" type="button">         <input id="nameField" name="name" value="WebSocket" type="text"><br>    </form> </div> <div id="output"></div> The code is relatively straight forward. It has an HTML form with a button that invokes say_hello() method and a text field named nameField. A div placeholder is available for displaying the output. Now, lets take a look at some JavaScript code: <script language="javascript" type="text/javascript"> var wsUri = "ws://localhost:8080/HelloWebSocket/hello";     var websocket = new WebSocket(wsUri);     websocket.onopen = function(evt) { onOpen(evt) };     websocket.onmessage = function(evt) { onMessage(evt) };     websocket.onerror = function(evt) { onError(evt) };     function init() {         output = document.getElementById("output");     }     function say_hello() {      websocket.send(nameField.value);         writeToScreen("SENT: " + nameField.value);     } This application is deployed as "HelloWebSocket.war" (download here) on GlassFish 4.0 promoted build 57. So the WebSocket endpoint is listening at "ws://localhost:8080/HelloWebSocket/hello". A new WebSocket connection is initiated by specifying the URI to connect to. The JavaScript API defines callback methods that are invoked when the connection is opened (onOpen), closed (onClose), error received (onError), or a message from the endpoint is received (onMessage). The client API has several send methods that transmit data over the connection. This particular script sends text data in the say_hello method using nameField's value from the HTML shown earlier. Each click on the button sends the textbox content to the endpoint over a WebSocket connection and receives a response based upon implementation in the sayHello method shown above. How to test this out ? Download the entire source project here or just the WAR file. Download GlassFish4.0 build 57 or later and unzip. Start GlassFish as "asadmin start-domain". Deploy the WAR file as "asadmin deploy HelloWebSocket.war". Access the application at http://localhost:8080/HelloWebSocket/index.jsp. After clicking on "Say Hello" button, the output would look like: Here are some references for you: WebSocket - Protocol and JavaScript API JSR 356: Java API for WebSocket - Specification (Early Draft) and Implementation (already integrated in GlassFish 4 promoted builds) Subsequent blogs will discuss the following topics (not necessary in that order) ... Binary data as payload Custom payloads using encoder/decoder Error handling Interface-driven WebSocket endpoint Java client API Client and Server configuration Security Subprotocols Extensions Other topics from the API Capturing WebSocket on-the-wire messages

    Read the article

  • Getting your bearings and defining the project objective

    - by johndoucette
    I wrote this two years ago and thought it was worth posting… Some may think this is a daunting task and some may even say “what a waste of time” and want to open MS Project and start typing out tasks because someone asked for an estimate and a task list. Hell, maybe you even use Excel and pump out a spreadsheet with some real scientific formula for guessing how long it will take to code a bunch of classes. However, this short exercise will provide the basis for the entire project, whether small or large and be a great friend when communicating to anyone on your team or even your client. I call this the Project Brief. If you find yourself going beyond a single page, then you must decompose the sections and summarize your findings so there is a complete and clear picture of the project you are working on in a relatively short statement. Here is a great quote from the PMBOK (Project Management Body of Knowledge) relative to what a project is;   A project is a temporary endeavor undertaken to create a unique product, service or result. With this in mind, the project brief should encompass the entirety (objective) of the endeavor in its explanation and what it will take (goals) to create the product, service or result (deliverables). Normally the process of identifying the project objective is done during the first stage of a project called the Project Kickoff, but you can perform this very important step anytime to help you get a bearing. There are many more parts to helping a project stay on course, but this is usually the foundation where it can be grounded on. Through a series of 3 exercises, you should be able to come up with the objective, goals and deliverables on your project. Follow these steps, and in no time (about &frac12; hour), you will have the foundation of your project plan. (See examples below) Exercise 1 – Objectives Begin with the end in mind. Think about your project in business terms with a couple things to help you understand the objective; Reference the business benefit in terms of cost, speed and / or quality, Provide a higher level of what the outcome will look like (future sense) It should be non-measurable, that’s what the goals are all about The output should be a single paragraph with three sentences and take 10 minutes to write. *Typically, agreement must be reached on the objectives of the project before you would proceed to the next steps of the project. Exercise 2 – Goals A project goal is a statement that answers questions about who, what, why, where and when. A good project goal statement; Answers the five “W” questions for the project Is measurable in each of its parts Is published and agreed on by all the owners This helps the Project Manager receive confirmation on defining the project target. Using the established project objective done in the first exercise, think about the things it will take to get the job done. Think about tangible activities which are the top level tasks in a typical Work Breakdown Structure (WBS). The overall goal statement plus all the deliverables (next exercise) can be seen as the project team’s contract with the project owners. Write 3 - 5 goals in about 10 minutes. You should not write the words “Who, what, why, where and when, but merely be able to answer the questions when you read a goal. Exercise 3 – Deliverables Every project creates some type of output and these outputs are called deliverables. There are two classes of deliverables; Internal – produced for project team members to meet their goals External – produced for project owners to meet their expectations The list you enter here provides a checklist for the team’s delivery and/or is a statement of all the expectations of the project owners. Here are some typical project deliverables; Product and product documentation End product/system Requirements/feature documents Installation guides Demo/prototype System design documents User guides/help files Plans Project plan Training plan Conversion/installation/delivery plan Test plans Documentation plan Communication plan Reports and general documentation Progress reports System acceptance tests Outstanding bug list Procedures Risk and issue logs Project history Deliverables should go with each of the goals. Have 3-5 deliverables for each goal. When you are done, you will have established a great foundation for the clarity of your project. This exercise can take some time, but with practice, you should be able to whip this one out in 10 minutes as well, especially if you are intimate with an ongoing project. Samples  Objective [Client] is implementing a series of MOSS sites to support external public (Internet), internal employee (Intranet) and an external secure (password protected Internet) applications. This project will focus on the public-facing web site and will provide [Client] with architectural recommendations based on the current design being done by their design partner [Partner] and the internal Content Team. In addition, it will provide [Client] with a development plan and confidence they need to deploy a world class public Internet website. Goals 1.  [Consultant] will provide technical guidance and set project team expectations for the implementation of the MOSS Internet site based on provided features/functions within three weeks. 2.  [Consultant] will understand phase 2 secure password-protected Internet site design and provide recommendations.   Deliverables 1.1  Public Internet (unsecure) Architectural Recommendation Plan 1.2  Physical Site construction Work Breakdown Structure and plan (Time, cost and resources needed) 2.1  Two Factor authentication recommendation document   Objective [Client] is currently using an application developed by [Consultant] many years ago called "XXX". This application, although functional, does not meet their new updated business requirements and contains a few defects which [Client] has developed work-around processes. [Client] would like to have a "new and improved" system to support their membership management needs by expanding membership and subscription capabilities, provide accounting integration with internal (GL) and external (VeriSign) systems, and implement hooks to the current CRM solution. This effort will take place through a series of phases, beginning with envisioning. Goals 1. Through discussions with users, [Consultant] will discover current issues/bugs which need to be resolved which must meet the current functionality requirements within three weeks. 2. [Consultant] will gather requirements from the users about what is "needed" vs. "what they have" for enhancements and provide a high level document supporting their needs. 3. [Consultant] will meet with the team members through a series of meetings and help define the overall project plan to deliver a new and improved solution. Deliverables 1.1 Prioritized list of Current application issues/bugs that need to be resolved 1.2 Provide a resolution plan on the issues/bugs identified in the current application 1.3 Risk Assessment Document 2.1 Deliver a Requirements Document showing high-level [Client] needs for the new XXX application. · New feature functionality not in the application today · Existing functionality that will remain in the new functionality 2.2 Reporting Requirements Document 3.1 A Project Plan showing the deliverables and cost for the next (second) phase of this project. 3.2 A Statement of Work for the next (second) phase of this project. 3.3 An Estimate of any work that would need to follow the second phase.

    Read the article

  • The Birth of a Method - Where did OUM come from?

    - by user702549
    It seemed fitting to start this blog entry with the OUM vision statement. The vision for the Oracle® Unified Method (OUM) is to support the entire Enterprise IT lifecycle, including support for the successful implementation of every Oracle product.  Well, it’s that time of year again; we just finished testing and packaging OUM 5.6.  It will be released for general availability to qualifying customers and partners this month.  Because of this, I’ve been reflecting back on how the birth of Oracle’s Unified method - OUM came about. As the Release Director of OUM, I’ve been honored to package every method release.  No, maybe you’d say it’s not so special.  Of course, anyone can use packaging software to create an .exe file.  But to me, it is pretty special, because so many people work together to make each release come about.  The rich content that results is what makes OUM’s history worth talking about.   To me, professionally speaking, working on OUM, well it’s been “a labor of love”.  My youngest child was just 8 years old when OUM was born, and she’s now in High School!  Watching her grow and change has been fascinating, if you ask her, she’s grown up hearing about OUM.  My son would often walk into my home office and ask “How is OUM today, Mom?”  I am one of many people that take care of OUM, and have watched the method “mature” over these last 6 years.  Maybe that makes me a "Method Mom" (someone in one of my classes last year actually said this outloud) but there are so many others who collaborate and care about OUM Development. I’ve thought about writing this blog entry for a long time just to reflect on how far the Method has come. Each release, as I prepare the OUM Contributors list, I see how many people’s experience and ideas it has taken to create this wealth of knowledge, process and task guidance as well as templates and examples.  If you’re wondering how many people, just go into OUM select the resources button on the top of most pages of the method, and on that resources page click the ABOUT link. So now back to my nostalgic moment as I finished release 5.6 packaging.  I reflected back, on all the things that happened that cause OUM to become not just a dream but to actually come to fruition.  Here are some key conditions that make it possible for each release of the method: A vision to have one method instead of many methods, thereby focusing on deeper, richer content People within Oracle’s consulting Organization  willing to contribute to OUM providing Subject Matter Experts who are willing to write down and share what they know. Oracle’s continued acquisition of software companies, the need to assimilate high quality existing materials from these companies The need to bring together people from very different backgrounds and provide a common language to support Oracle Product implementations that often involve multiple product families What came first, and then what was the strategy? Initially OUM 4.0 was based on Oracle’s J2EE Custom Development Method (JCDM), it was a good “backbone”  (work breakdown structure) it was Unified Process based, and had good content around UML as well as custom software development.  But it needed to be extended in order to achieve the OUM Vision. What happened after that was to take in the “best of the best”, the legacy and acquired methods were scheduled for assimilation into OUM, one release after another.  We incrementally built OUM.  We didn’t want to lose any of the expertise that was reflected in AIM (Oracle’s legacy Application Implementation Method), Compass (People Soft’s Application implementation method) and so many more. When was OUM born? OUM 4.1 published April 30, 2006.  This release allowed Oracles Advanced Technology groups to begin the very first implementations of Fusion Middleware.  In the early days of the Method we would prepare several releases a year.  Our iterative release development cycle began and continues to be refined with each Method release.  Now we typically see one major release each year. The OUM release development cycle is not unlike many Oracle Implementation projects in that we need to gather requirements, prioritize, prepare the content, test package and then go production.  Typically we develop an OUM release MoSCoW (must have, should have, could have, and won’t have) right after the prior release goes out.   These are the high level requirements.  We break the timeframe into increments, frequent checkpoints that help us assess the content and progress is measured through frequent checkpoints.  We work as a team to prioritize what should be done in each increment. Yes, the team provides the estimates for what can be done within a particular increment.  We sometimes have Method Development workshops (physically or virtually) to accelerate content development on a particular subject area, that is where the best content results. As the written content nears the final stages, it goes through edit and evaluation through peer reviews, and then moves into the release staging environment.  Then content freeze and testing of the method pack take place.  This iterative cycle is run using the OUM artifacts that make sense “fit for purpose”, project plans, MoSCoW lists, Test plans are just a few of the OUM work products we use on a Method Release project. In 2007 OUM 4.3, 4.4 and 4.5 were published.  With the release of 4.5 our Custom BI Method (Data Warehouse Method FastTrack) was assimilated into OUM.  These early releases helped us align Oracle’s Unified method with other industry standards Then in 2008 we made significant changes to the OUM “Backbone” to support Applications Implementation projects with that went to the OUM 5.0 release.  Now things started to get really interesting.  Next we had some major developments in the Envision focus area in the area of Enterprise Architecture.  We acquired some really great content from the former BEA, Liquid Enterprise Method (LEM) along with some SMEs who were willing to work at bringing this content into OUM.  The Service Oriented Architecture content in OUM is extensive and can help support the successful implementation of Fusion Middleware, as well as Fusion Applications. Of course we’ve developed a wealth of OUM training materials that work also helps to improve the method content.  It is one thing to write “how to”, and quite another to be able to teach people how to use the materials to improve the success of their projects.  I’ve learned so much by teaching people how to use OUM. What's next? So here toward the end of 2012, what’s in store in OUM 5.6, well, I’m sure you won’t be surprised the answer is Cloud Computing.   More details to come in the next couple of weeks!  The best part of being involved in the development of OUM is to see how many people have “adopted” OUM over these six years, Clients, Partners, and Oracle Consultants.  The content just gets better with each release.   I’d love to hear your comments on how OUM has evolved, and ideas for new content you’d like to see in the upcoming releases.

    Read the article

  • Contracting as a Software Developer in the UK

    - by Frez
    Normal 0 false false false EN-GB X-NONE X-NONE /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-parent:""; mso-padding-alt:0cm 5.4pt 0cm 5.4pt; mso-para-margin-top:0cm; mso-para-margin-right:0cm; mso-para-margin-bottom:10.0pt; mso-para-margin-left:0cm; line-height:115%; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi; mso-fareast-language:EN-US;} Having had some 15 years’ experience of working as a software contractor, I am often asked by developers who work as permanent employees (permies) about the pros and cons of working as a software consultant through my own limited company and whether the move would be a good one for them. Whilst it is possible to contract using other financial vehicles such as umbrella companies, this article will only consider limited companies as that is what I have experience of using. Contracting or consultancy requires a different mind-set from being a permanent member of staff, and not all developers are capable of this shift in attitude. Whilst you can look forward to an increase in the money you take home, there are real risks and expenses you would not normally be exposed to as a permie. So let us have a look at the pros and cons: Pros: More money There is no doubt that whilst you are working on contracts you will earn significantly more than you would as a permanent employee. Furthermore, working through a limited company is more tax efficient. Less politics You really have no need to involve yourself in office politics. When the end of the day comes you can go home and not think or worry about the power struggles within the company you are contracted to. Your career progression is not tied to the company. Expenses from gross income All your expenses of trading as a business will come out of your company’s gross income, i.e. before tax. This covers travelling expenses provided you have not been at the same client/location for more than two years, internet subscriptions, professional subscriptions, software, hardware, accountancy services and so on. Cons: Work is more transient Contracts typically range from a couple of weeks to a year, although will most likely start at 3 months. However, most contracts are extended either because the project you have been brought in to help with takes longer to deliver than expected, the client decides they can use you on other aspects of the project, or the client decides they would like to use you on other projects. The temporary nature of the work means that you will have down-time between contracts while you secure new opportunities during which time your company will have no income. You may need to attend several interviews before securing a new contract. Accountancy expenses Your company is a separate entity and there are accountancy requirements which, unless you like paperwork, means your company will need to appoint an accountant to prepare your company’s accounts. It may also be worth purchasing some accountancy software, so talk to your accountant about this as they may prefer you to use a particular software package so they can integrate it with their systems. VAT You will need to register your company for VAT. This is tax neutral for you as the VAT you charge your clients you will pass onto the government less any VAT you are reclaiming from expenses, but it is additional paperwork to undertake each quarter. It is worth checking out the Fixed Rate VAT Scheme that is available, particularly after the initial expenses of setting up your company are over. No training Clients take you on based on your skills, not to train you when they will lose that investment at the end of the contract, so understand that it is unlikely you will receive any training funded by a client. However, learning new skills during a contract is possible and you may choose to accept a contract on a lower rate if this is guaranteed as it will help secure future contracts. No financial extras You will have no free pension, life, accident, sickness or medical insurance unless you choose to purchase them yourself. A financial advisor can give you all the necessary advice in this area, and it is worth taking seriously. A year after I started as a consultant I contracted a serious illness, this kept me off work for over two months, my client was very understanding and it could have been much worse, so it is worth considering what your options might be in the case of illness, death and retirement. Agencies Whilst it is possible to work directly for end clients there are pros and cons of working through an agency.  The main advantage is cash flow, you invoice the agency and they typically pay you within a week, whereas working directly for a client could have you waiting up to three months to be paid. The downside of working for agencies, especially in the current difficult times, is that they may go out of business and you then have difficulty getting the money you are owed. Tax investigation It is possible that the Inland Revenue may decide to investigate your company for compliance with tax law. Insurance is available to cover you for this. My personal recommendation would be to join the PCG as this insurance is included as a benefit of membership, Professional Indemnity Some agencies require that you are covered by professional indemnity insurance; this is a cost you would not incur as a permie. Travel Unless you live in an area that has an abundance of opportunities, such as central London, it is likely that you will be travelling further, longer and with more expense than if you were permanently employed at a local company. This not only affects you monetarily, but also your quality of life and the ability to keep fit and healthy. Obtaining finance If you want to secure a mortgage on a property it can be more difficult or expensive, especially if you do not have three years of audited accounts to show a mortgage lender.   Caveat This post is my personal opinion and should not be used as a definitive guide or recommendation to contracting and whether it is suitable for you as an individual, i.e. I accept no responsibility if you decide to take up contracting based on this post and you fare badly for whatever reason.

    Read the article

  • The SSIS tuning tip that everyone misses

    - by Rob Farley
    I know that everyone misses this, because I’m yet to find someone who doesn’t have a bit of an epiphany when I describe this. When tuning Data Flows in SQL Server Integration Services, people see the Data Flow as moving from the Source to the Destination, passing through a number of transformations. What people don’t consider is the Source, getting the data out of a database. Remember, the source of data for your Data Flow is not your Source Component. It’s wherever the data is, within your database, probably on a disk somewhere. You need to tune your query to optimise it for SSIS, and this is what most people fail to do. I’m not suggesting that people don’t tune their queries – there’s plenty of information out there about making sure that your queries run as fast as possible. But for SSIS, it’s not about how fast your query runs. Let me say that again, but in bolder text: The speed of an SSIS Source is not about how fast your query runs. If your query is used in a Source component for SSIS, the thing that matters is how fast it starts returning data. In particular, those first 10,000 rows to populate that first buffer, ready to pass down the rest of the transformations on its way to the Destination. Let’s look at a very simple query as an example, using the AdventureWorks database: We’re picking the different Weight values out of the Product table, and it’s doing this by scanning the table and doing a Sort. It’s a Distinct Sort, which means that the duplicates are discarded. It'll be no surprise to see that the data produced is sorted. Obvious, I know, but I'm making a comparison to what I'll do later. Before I explain the problem here, let me jump back into the SSIS world... If you’ve investigated how to tune an SSIS flow, then you’ll know that some SSIS Data Flow Transformations are known to be Blocking, some are Partially Blocking, and some are simply Row transformations. Take the SSIS Sort transformation, for example. I’m using a larger data set for this, because my small list of Weights won’t demonstrate it well enough. Seven buffers of data came out of the source, but none of them could be pushed past the Sort operator, just in case the last buffer contained the data that would be sorted into the first buffer. This is a blocking operation. Back in the land of T-SQL, we consider our Distinct Sort operator. It’s also blocking. It won’t let data through until it’s seen all of it. If you weren’t okay with blocking operations in SSIS, why would you be happy with them in an execution plan? The source of your data is not your OLE DB Source. Remember this. The source of your data is the NCIX/CIX/Heap from which it’s being pulled. Picture it like this... the data flowing from the Clustered Index, through the Distinct Sort operator, into the SELECT operator, where a series of SSIS Buffers are populated, flowing (as they get full) down through the SSIS transformations. Alright, I know that I’m taking some liberties here, because the two queries aren’t the same, but consider the visual. The data is flowing from your disk and through your execution plan before it reaches SSIS, so you could easily find that a blocking operation in your plan is just as painful as a blocking operation in your SSIS Data Flow. Luckily, T-SQL gives us a brilliant query hint to help avoid this. OPTION (FAST 10000) This hint means that it will choose a query which will optimise for the first 10,000 rows – the default SSIS buffer size. And the effect can be quite significant. First let’s consider a simple example, then we’ll look at a larger one. Consider our weights. We don’t have 10,000, so I’m going to use OPTION (FAST 1) instead. You’ll notice that the query is more expensive, using a Flow Distinct operator instead of the Distinct Sort. This operator is consuming 84% of the query, instead of the 59% we saw from the Distinct Sort. But the first row could be returned quicker – a Flow Distinct operator is non-blocking. The data here isn’t sorted, of course. It’s in the same order that it came out of the index, just with duplicates removed. As soon as a Flow Distinct sees a value that it hasn’t come across before, it pushes it out to the operator on its left. It still has to maintain the list of what it’s seen so far, but by handling it one row at a time, it can push rows through quicker. Overall, it’s a lot more work than the Distinct Sort, but if the priority is the first few rows, then perhaps that’s exactly what we want. The Query Optimizer seems to do this by optimising the query as if there were only one row coming through: This 1 row estimation is caused by the Query Optimizer imagining the SELECT operation saying “Give me one row” first, and this message being passed all the way along. The request might not make it all the way back to the source, but in my simple example, it does. I hope this simple example has helped you understand the significance of the blocking operator. Now I’m going to show you an example on a much larger data set. This data was fetching about 780,000 rows, and these are the Estimated Plans. The data needed to be Sorted, to support further SSIS operations that needed that. First, without the hint. ...and now with OPTION (FAST 10000): A very different plan, I’m sure you’ll agree. In case you’re curious, those arrows in the top one are 780,000 rows in size. In the second, they’re estimated to be 10,000, although the Actual figures end up being 780,000. The top one definitely runs faster. It finished several times faster than the second one. With the amount of data being considered, these numbers were in minutes. Look at the second one – it’s doing Nested Loops, across 780,000 rows! That’s not generally recommended at all. That’s “Go and make yourself a coffee” time. In this case, it was about six or seven minutes. The faster one finished in about a minute. But in SSIS-land, things are different. The particular data flow that was consuming this data was significant. It was being pumped into a Script Component to process each row based on previous rows, creating about a dozen different flows. The data flow would take roughly ten minutes to run – ten minutes from when the data first appeared. The query that completes faster – chosen by the Query Optimizer with no hints, based on accurate statistics (rather than pretending the numbers are smaller) – would take a minute to start getting the data into SSIS, at which point the ten-minute flow would start, taking eleven minutes to complete. The query that took longer – chosen by the Query Optimizer pretending it only wanted the first 10,000 rows – would take only ten seconds to fill the first buffer. Despite the fact that it might have taken the database another six or seven minutes to get the data out, SSIS didn’t care. Every time it wanted the next buffer of data, it was already available, and the whole process finished in about ten minutes and ten seconds. When debugging SSIS, you run the package, and sit there waiting to see the Debug information start appearing. You look for the numbers on the data flow, and seeing operators going Yellow and Green. Without the hint, I’d sit there for a minute. With the hint, just ten seconds. You can imagine which one I preferred. By adding this hint, it felt like a magic wand had been waved across the query, to make it run several times faster. It wasn’t the case at all – but it felt like it to SSIS.

    Read the article

  • ASP.NET WebAPI Security 3: Extensible Authentication Framework

    - by Your DisplayName here!
    In my last post, I described the identity architecture of ASP.NET Web API. The short version was, that Web API (beta 1) does not really have an authentication system on its own, but inherits the client security context from its host. This is fine in many situations (e.g. AJAX style callbacks with an already established logon session). But there are many cases where you don’t use the containing web application for authentication, but need to do it yourself. Examples of that would be token based authentication and clients that don’t run in the context of the web application (e.g. desktop clients / mobile). Since Web API provides a nice extensibility model, it is easy to implement whatever security framework you want on top of it. My design goals were: Easy to use. Extensible. Claims-based. ..and of course, this should always behave the same, regardless of the hosting environment. In the rest of the post I am outlining some of the bits and pieces, So you know what you are dealing with, in case you want to try the code. At the very heart… is a so called message handler. This is a Web API extensibility point that gets to see (and modify if needed) all incoming and outgoing requests. Handlers run after the conversion from host to Web API, which means that handler code deals with HttpRequestMessage and HttpResponseMessage. See Pedro’s post for more information on the processing pipeline. This handler requires a configuration object for initialization. Currently this is very simple, it contains: Settings for the various authentication and credential types Settings for claims transformation Ability to block identity inheritance from host The most important part here is the credential type support, but I will come back to that later. The logic of the message handler is simple: Look at the incoming request. If the request contains an authorization header, try to authenticate the client. If this is successful, create a claims principal and populate the usual places. If not, return a 401 status code and set the Www-Authenticate header. Look at outgoing response, if the status code is 401, set the Www-Authenticate header. Credential type support Under the covers I use the WIF security token handler infrastructure to validate credentials and to turn security tokens into claims. The idea is simple: an authorization header consists of two pieces: the schema and the actual “token”. My configuration object allows to associate a security token handler with a scheme. This way you only need to implement support for a specific credential type, and map that to the incoming scheme value. The current version supports HTTP Basic Authentication as well as SAML and SWT tokens. (I needed to do some surgery on the standard security token handlers, since WIF does not directly support string-ified tokens. The next version of .NET will fix that, and the code should become simpler then). You can e.g. use this code to hook up a username/password handler to the Basic scheme (the default scheme name for Basic Authentication). config.Handler.AddBasicAuthenticationHandler( (username, password) => username == password); You simply have to provide a password validation function which could of course point back to your existing password library or e.g. membership. The following code maps a token handler for Simple Web Tokens (SWT) to the Bearer scheme (the currently favoured scheme name for OAuth2). You simply have to specify the issuer name, realm and shared signature key: config.Handler.AddSimpleWebTokenHandler(     "Bearer",     http://identity.thinktecture.com/trust,     Constants.Realm,     "Dc9Mpi3jaaaUpBQpa/4R7XtUsa3D/ALSjTVvK8IUZbg="); For certain integration scenarios it is very useful if your Web API can consume SAML tokens. This is also easily accomplishable. The following code uses the standard WIF API to configure the usual SAMLisms like issuer, audience, service certificate and certificate validation. Both SAML 1.1 and 2.0 are supported. var registry = new ConfigurationBasedIssuerNameRegistry(); registry.AddTrustedIssuer( "d1 c5 b1 25 97 d0 36 94 65 1c e2 64 fe 48 06 01 35 f7 bd db", "ADFS"); var adfsConfig = new SecurityTokenHandlerConfiguration(); adfsConfig.AudienceRestriction.AllowedAudienceUris.Add( new Uri(Constants.Realm)); adfsConfig.IssuerNameRegistry = registry; adfsConfig.CertificateValidator = X509CertificateValidator.None; // token decryption (read from configuration section) adfsConfig.ServiceTokenResolver = FederatedAuthentication.ServiceConfiguration.CreateAggregateTokenResolver(); config.Handler.AddSaml11SecurityTokenHandler("SAML", adfsConfig); Claims Transformation After successful authentication, if configured, the standard WIF ClaimsAuthenticationManager is called to run claims transformation and validation logic. This stage is used to transform the “technical” claims from the security token into application claims. You can either have a separate transformation logic, or share on e.g. with the containing web application. That’s just a matter of configuration. Adding the authentication handler to a Web API application In the spirit of Web API this is done in code, e.g. global.asax for web hosting: protected void Application_Start() {     AreaRegistration.RegisterAllAreas();     ConfigureApis(GlobalConfiguration.Configuration);     RegisterGlobalFilters(GlobalFilters.Filters);     RegisterRoutes(RouteTable.Routes);     BundleTable.Bundles.RegisterTemplateBundles(); } private void ConfigureApis(HttpConfiguration configuration) {     configuration.MessageHandlers.Add( new AuthenticationHandler(ConfigureAuthentication())); } private AuthenticationConfiguration ConfigureAuthentication() {     var config = new AuthenticationConfiguration     {         // sample claims transformation for consultants sample, comment out to see raw claims         ClaimsAuthenticationManager = new ApiClaimsTransformer(),         // value of the www-authenticate header, // if not set, the first scheme added to the handler collection is used         DefaultAuthenticationScheme = "Basic"     };     // add token handlers - see above     return config; } You can find the full source code and some samples here. In the next post I will describe some of the samples in the download, and then move on to authorization. HTH

    Read the article

  • ASP.NET MVC: Using ProfileRequiredAttribute to restrict access to pages

    - by DigiMortal
    If you are using AppFabric Access Control Services to authenticate users when they log in to your community site using Live ID, Google or some other popular identity provider, you need more than AuthorizeAttribute to make sure that users can access the content that is there for authenticated users only. In this posting I will show you hot to extend the AuthorizeAttribute so users must also have user profile filled. Semi-authorized users When user is authenticated through external identity provider then not all identity providers give us user name or other information we ask users when they join with our site. What all identity providers have in common is unique ID that helps you identify the user. Example. Users authenticated through Windows Live ID by AppFabric ACS have no name specified. Google’s identity provider is able to provide you with user name and e-mail address if user agrees to publish this information to you. They both give you unique ID of user when user is successfully authenticated in their service. There is logical shift between ASP.NET and my site when considering user as authorized. For ASP.NET MVC user is authorized when user has identity. For my site user is authorized when user has profile and row in my users table. Having profile means that user has unique username in my system and he or she is always identified by this username by other users. My solution is simple: I created my own action filter attribute that makes sure if user has profile to access given method and if user has no profile then browser is redirected to join page. Illustrating the problem Usually we restrict access to page using AuthorizeAttribute. Code is something like this. [Authorize] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } If this page is only for site users and we have user profiles then all users – the ones that have profile and all the others that are just authenticated – can access the information. It is okay because all these users have successfully logged in in some service that is supported by AppFabric ACS. In my site the users with no profile are in grey spot. They are on half way to be users because they have no username and profile on my site yet. So looking at the image above again we need something that adds profile existence condition to user-only content. [ProfileRequired] public ActionResult Details(string id) {     var profile = _userRepository.GetUserByUserName(id);     return View(profile); } Now, this attribute will solve our problem as soon as we implement it. ProfileRequiredAttribute: Profiles are required to be fully authorized Here is my implementation of ProfileRequiredAttribute. It is pretty new and right now it is more like working draft but you can already play with it. public class ProfileRequiredAttribute : AuthorizeAttribute {     private readonly string _redirectUrl;       public ProfileRequiredAttribute()     {         _redirectUrl = ConfigurationManager.AppSettings["JoinUrl"];         if (string.IsNullOrWhiteSpace(_redirectUrl))             _redirectUrl = "~/";     }              public override void OnAuthorization(AuthorizationContext filterContext)     {         base.OnAuthorization(filterContext);           var httpContext = filterContext.HttpContext;         var identity = httpContext.User.Identity;           if (!identity.IsAuthenticated || identity.GetProfile() == null)             if(filterContext.Result == null)                 httpContext.Response.Redirect(_redirectUrl);          } } All methods with this attribute work as follows: if user is not authenticated then he or she is redirected to AppFabric ACS identity provider selection page, if user is authenticated but has no profile then user is by default redirected to main page of site but if you have application setting with name JoinUrl then user is redirected to this URL. First case is handled by AuthorizeAttribute and the second one is handled by custom logic in ProfileRequiredAttribute class. GetProfile() extension method To get user profile using less code in places where profiles are needed I wrote GetProfile() extension method for IIdentity interface. There are some more extension methods that read out user and identity provider identifier from claims and based on this information user profile is read from database. If you take this code with copy and paste I am sure it doesn’t work for you but you get the idea. public static User GetProfile(this IIdentity identity) {     if (identity == null)         return null;       var context = HttpContext.Current;     if (context.Items["UserProfile"] != null)         return context.Items["UserProfile"] as User;       var provider = identity.GetIdentityProvider();     var nameId = identity.GetNameIdentifier();       var rep = ObjectFactory.GetInstance<IUserRepository>();     var profile = rep.GetUserByProviderAndNameId(provider, nameId);       context.Items["UserProfile"] = profile;       return profile; } To avoid round trips to database I cache user profile to current request because the chance that profile gets changed meanwhile is very minimal. The other reason is maybe more tricky – profile objects are coming from Entity Framework context and context has also HTTP request as lifecycle. Conclusion This posting gave you some ideas how to finish user profiles stuff when you use AppFabric ACS as external authentication provider. Although there was little shift between us and ASP.NET MVC with interpretation of “authorized” we were easily able to solve the problem by extending AuthorizeAttribute to get all our requirements fulfilled. We also write extension method for IIdentity that returns as user profile based on username and caches the profile in HTTP request scope.

    Read the article

  • Set Context User Principal for Customized Authentication in SignalR

    - by Shaun
    Originally posted on: http://geekswithblogs.net/shaunxu/archive/2014/05/27/set-context-user-principal-for-customized-authentication-in-signalr.aspxCurrently I'm working on a single page application project which is built on AngularJS and ASP.NET WebAPI. When I need to implement some features that needs real-time communication and push notifications from server side I decided to use SignalR. SignalR is a project currently developed by Microsoft to build web-based, read-time communication application. You can find it here. With a lot of introductions and guides it's not a difficult task to use SignalR with ASP.NET WebAPI and AngularJS. I followed this and this even though it's based on SignalR 1. But when I tried to implement the authentication for my SignalR I was struggled 2 days and finally I got a solution by myself. This might not be the best one but it actually solved all my problem.   In many articles it's said that you don't need to worry about the authentication of SignalR since it uses the web application authentication. For example if your web application utilizes form authentication, SignalR will use the user principal your web application authentication module resolved, check if the principal exist and authenticated. But in my solution my ASP.NET WebAPI, which is hosting SignalR as well, utilizes OAuth Bearer authentication. So when the SignalR connection was established the context user principal was empty. So I need to authentication and pass the principal by myself.   Firstly I need to create a class which delivered from "AuthorizeAttribute", that will takes the responsible for authenticate when SignalR connection established and any method was invoked. 1: public class QueryStringBearerAuthorizeAttribute : AuthorizeAttribute 2: { 3: public override bool AuthorizeHubConnection(HubDescriptor hubDescriptor, IRequest request) 4: { 5: } 6:  7: public override bool AuthorizeHubMethodInvocation(IHubIncomingInvokerContext hubIncomingInvokerContext, bool appliesToMethod) 8: { 9: } 10: } The method "AuthorizeHubConnection" will be invoked when any SignalR connection was established. And here I'm going to retrieve the Bearer token from query string, try to decrypt and recover the login user's claims. 1: public override bool AuthorizeHubConnection(HubDescriptor hubDescriptor, IRequest request) 2: { 3: var dataProtectionProvider = new DpapiDataProtectionProvider(); 4: var secureDataFormat = new TicketDataFormat(dataProtectionProvider.Create()); 5: // authenticate by using bearer token in query string 6: var token = request.QueryString.Get(WebApiConfig.AuthenticationType); 7: var ticket = secureDataFormat.Unprotect(token); 8: if (ticket != null && ticket.Identity != null && ticket.Identity.IsAuthenticated) 9: { 10: // set the authenticated user principal into environment so that it can be used in the future 11: request.Environment["server.User"] = new ClaimsPrincipal(ticket.Identity); 12: return true; 13: } 14: else 15: { 16: return false; 17: } 18: } In the code above I created "TicketDataFormat" instance, which must be same as the one I used to generate the Bearer token when user logged in. Then I retrieve the token from request query string and unprotect it. If I got a valid ticket with identity and it's authenticated this means it's a valid token. Then I pass the user principal into request's environment property which can be used in nearly future. Since my website was built in AngularJS so the SignalR client was in pure JavaScript, and it's not support to set customized HTTP headers in SignalR JavaScript client, I have to pass the Bearer token through request query string. This is not a restriction of SignalR, but a restriction of WebSocket. For security reason WebSocket doesn't allow client to set customized HTTP headers from browser. Next, I need to implement the authentication logic in method "AuthorizeHubMethodInvocation" which will be invoked when any SignalR method was invoked. 1: public override bool AuthorizeHubMethodInvocation(IHubIncomingInvokerContext hubIncomingInvokerContext, bool appliesToMethod) 2: { 3: var connectionId = hubIncomingInvokerContext.Hub.Context.ConnectionId; 4: // check the authenticated user principal from environment 5: var environment = hubIncomingInvokerContext.Hub.Context.Request.Environment; 6: var principal = environment["server.User"] as ClaimsPrincipal; 7: if (principal != null && principal.Identity != null && principal.Identity.IsAuthenticated) 8: { 9: // create a new HubCallerContext instance with the principal generated from token 10: // and replace the current context so that in hubs we can retrieve current user identity 11: hubIncomingInvokerContext.Hub.Context = new HubCallerContext(new ServerRequest(environment), connectionId); 12: return true; 13: } 14: else 15: { 16: return false; 17: } 18: } Since I had passed the user principal into request environment in previous method, I can simply check if it exists and valid. If so, what I need is to pass the principal into context so that SignalR hub can use. Since the "User" property is all read-only in "hubIncomingInvokerContext", I have to create a new "ServerRequest" instance with principal assigned, and set to "hubIncomingInvokerContext.Hub.Context". After that, we can retrieve the principal in my Hubs through "Context.User" as below. 1: public class DefaultHub : Hub 2: { 3: public object Initialize(string host, string service, JObject payload) 4: { 5: var connectionId = Context.ConnectionId; 6: ... ... 7: var domain = string.Empty; 8: var identity = Context.User.Identity as ClaimsIdentity; 9: if (identity != null) 10: { 11: var claim = identity.FindFirst("Domain"); 12: if (claim != null) 13: { 14: domain = claim.Value; 15: } 16: } 17: ... ... 18: } 19: } Finally I just need to add my "QueryStringBearerAuthorizeAttribute" into the SignalR pipeline. 1: app.Map("/signalr", map => 2: { 3: // Setup the CORS middleware to run before SignalR. 4: // By default this will allow all origins. You can 5: // configure the set of origins and/or http verbs by 6: // providing a cors options with a different policy. 7: map.UseCors(CorsOptions.AllowAll); 8: var hubConfiguration = new HubConfiguration 9: { 10: // You can enable JSONP by uncommenting line below. 11: // JSONP requests are insecure but some older browsers (and some 12: // versions of IE) require JSONP to work cross domain 13: // EnableJSONP = true 14: EnableJavaScriptProxies = false 15: }; 16: // Require authentication for all hubs 17: var authorizer = new QueryStringBearerAuthorizeAttribute(); 18: var module = new AuthorizeModule(authorizer, authorizer); 19: GlobalHost.HubPipeline.AddModule(module); 20: // Run the SignalR pipeline. We're not using MapSignalR 21: // since this branch already runs under the "/signalr" path. 22: map.RunSignalR(hubConfiguration); 23: }); On the client side should pass the Bearer token through query string before I started the connection as below. 1: self.connection = $.hubConnection(signalrEndpoint); 2: self.proxy = self.connection.createHubProxy(hubName); 3: self.proxy.on(notifyEventName, function (event, payload) { 4: options.handler(event, payload); 5: }); 6: // add the authentication token to query string 7: // we cannot use http headers since web socket protocol doesn't support 8: self.connection.qs = { Bearer: AuthService.getToken() }; 9: // connection to hub 10: self.connection.start(); Hope this helps, Shaun All documents and related graphics, codes are provided "AS IS" without warranty of any kind. Copyright © Shaun Ziyan Xu. This work is licensed under the Creative Commons License.

    Read the article

  • Agile Like Jazz

    - by Jeff Certain
    (I’ve been sitting on this for a week or so now, thinking that it needed to be tightened up a bit to make it less rambling. Since that’s clearly not going to happen, reader beware!) I had the privilege of spending around 90 minutes last night sitting and listening to Sonny Rollins play a concert at the Disney Center in LA. If you don’t know who Sonny Rollins is, I don’t know how to explain the experience; if you know who he is, I don’t need to. Suffice it to say that he has been recording professionally for over 50 years, and helped create an entire genre of music. A true master by any definition. One of the most intriguing aspects of a concert like this, however, is watching the master step aside and let the rest of the musicians play. Not just play their parts, but really play… letting them take over the spotlight, to strut their stuff, to soak up enthusiastic applause from the crowd. Maybe a lot of it has to do with the fact that Sonny Rollins has been doing this for more than a half-century. Maybe it has something to do with a kind of patience you learn when you’re on the far side of 80 – and the man can still blow a mean sax for 90 minutes without stopping! Maybe it has to do with the fact that he was out there for the love of the music and the love of the show, not because he had anything to prove to anyone and, I like to think, not for the money. Perhaps it had more to do with the fact that, when you’re at that level of mastery, the other musicians are going to be good. Really good. Whatever the reasons, there was a incredible freedom on that stage – the ability to improvise, for each musician to showcase their own specialization and skills, and them come back to the common theme, back to being on the same page, as it were. All this took place in the same venue that is home to the L.A. Phil. Somehow, I can’t ever see the same kind of free-wheeling improvisation happening in that context. And, since I’m a geek, I started thinking about agility. Rollins has put together a quintet that reflects his own particular style and past. No upright bass or piano for Rollins – drums, bongos, electric guitar and bass guitar along with his sax. It’s not about the mix of instruments. Other trios, quartets, and sextets use different mixes of instruments. New Orleans jazz tends towards trombones instead of sax; some prefer cornet or trumpet. But no matter what the choice of instruments, size matters. Team sizes are something I’ve been thinking about for a while. We’re on a quest to rethink how our teams are organized. They just feel too big, too unwieldy. In fact, they really don’t feel like teams at all. Most of the time, they feel more like collections or people who happen to report to the same manager. I attribute this to a couple factors. One is over-specialization; we have a tendency to have people work in silos. Although the teams are product-focused, within them our developers are both generalists and specialists. On the one hand, we expect them to be able to build an entire vertical slice of the application; on the other hand, each developer tends to be responsible for the vertical slice. As a result, developers often work on their own piece of the puzzle, in isolation. This sort of feels like working on a jigsaw in a group – each person taking a set of colors and piecing them together to reveal a portion of the overall picture. But what inevitably happens when you go to meld all those pieces together? Inevitably, you have some sections that are too big to move easily. These sections end up falling apart under their own weight as you try to move them. Not only that, but there are other challenges – figuring out where that section fits, and how to tie it into the rest of the puzzle. Often, this is when you find a few pieces need to be added – these pieces are “glue,” if you will. The other issue that arises is due to the overhead of maintaining communications in a team. My mother, who worked in IT for around 30 years, once told me that 20% per team member is a good rule of thumb for maintaining communication. While this is a rule of thumb, it seems to imply that any team over about 6 people is going to become less agile simple because of the communications burden. Teams of ten or twelve seem like they fall into the philharmonic organizational model. Complicated pieces of music requiring dozens of players to all be on the same page requires a much different model than the jazz quintet. There’s much less room for improvisation, originality or freedom. (There are probably orchestral musicians who will take exception to this characterization; I’m calling it like I see it from the cheap seats.) And, there’s one guy up front who is running the show, whose job is to keep all of those dozens of players on the same page, to facilitate communications. Somehow, the orchestral model doesn’t feel much like a self-organizing team, either. The first violin may be the best violinist in the orchestra, but they don’t get to perform free-wheeling solos. I’ve never heard of an orchestra getting together for a jam session. But I have heard of teams that organize their work based on the developers available, rather than organizing the developers based on the work required. I have heard of teams where desired functionality is deferred – or worse yet, schedules are missed – because one critical person doesn’t have any bandwidth available. I’ve heard of teams where people simply don’t have the big picture, because there is too much communication overhead for everyone to be aware of everything that is happening on a project. I once heard Paul Rayner say something to the effect of “you have a process that is perfectly designed to give you exactly the results you have.” Given a choice, I want a process that’s much more like jazz than orchestral music. I want a process that doesn’t burden me with lots of forms and checkboxes and stuff. Give me the simplest, most lightweight process that will work – and a smaller team of the best developers I can find. This seems like the kind of process that will get the kind of result I want to be part of.

    Read the article

  • Azure Diagnostics: The Bad, The Ugly, and a Better Way

    - by jasont
    If you’re a .Net web developer today, no doubt you’ve enjoyed watching Windows Azure grow up over the past couple of years. The platform has scaled, stabilized (mostly), and added on a slew of great (and sometimes overdue) features. What was once just an endpoint to host a solution, developers today have tremendous flexibility and options in the platform. Organizations are building new solutions and offerings on the platform, and others have, or are in the process of, migrating existing applications out of their own data centers into the Azure cloud. Whether new application development or migrating legacy, every development shop and IT organization needs to monitor their applications in the cloud, the same as they do on premises. Azure Diagnostics has some capabilities, but what I constantly hear from users is that it’s either (a) not enough, or (b) too cumbersome to set up. Today, Stackify is happy to announce that we fully support Azure deployments, just the same as your on-premises deployments. Let’s take a look below and compare and contrast the options. Azure Diagnostics Let’s crack open the Windows Azure documentation on Azure Diagnostics and see just how easy it is to use. The high level steps are:   Step 1: Import the Diagnostics Oh, I’ve already deployed my app without the diagnostics module. Guess I can’t do anything until I do this and re-deploy. Step 2: Configure the Diagnostics (and multiple sub-steps) Do I want it all? Or just pieces of it? Whoops, forgot to include a specific performance counter, I guess I’ll have to deploy again. Wait a minute… I have to specifically code these performance counters into my role’s OnStart() method, compile and deploy again? And query and consume it myself? Step 3: (Optional) Permanently store diagnostic data Lucky for me, Azure storage has gotten pretty cheap. But how often should I move the data into storage? I want to see real-time data, so I guess that’s out now as well. Step 4: (Optional) View stored diagnostic data Optional? Of course I want to see it. Conveniently, Microsoft recommends 3 tools to do this with. Un-conveniently, none of these are web based and they all just give you access to raw data, and very little charting or real-time intelligence. Just….. data. Nevermind that one product seems to have gotten stale since a recent acquisition, and doesn’t even have screenshots!   So, let’s summarize: lots of diagnostics data is available, but think realistically. Think Dev Ops. What happens when you are in the middle of a major production performance issue and you don’t have the diagnostics you need? You are redeploying an application (and thankfully you have a great branching strategy, so you feel perfectly safe just willy-nilly launching code into prod, don’t you?) to get data, then shipping it to storage, and then digging through that data to find a needle in a haystack. Would you like to be able to troubleshoot a performance issue in the middle of the night, or on a weekend, from your iPad or home computer’s web browser? Forget it: the best you get is this spark line in the Azure portal. If it’s real pointy, you probably have an issue; but since there is no alert based on a threshold your customers have likely already let you know. And high CPU, Memory, I/O, or Network doesn’t tell you anything about where the problem is. The Better Way – Stackify Stackify supports application and server monitoring in real time, all through a great web interface. All of the things that Azure Diagnostics provides, Stackify provides for your on-premises deployments, and you don’t need to know ahead of time that you’ll need it. It’s always there, it’s always on. Azure deployments are essentially no different than on-premises. It’s a Windows Server (or Linux) in the cloud. It’s behind a different firewall than your corporate servers. That’s it. Stackify can provide the same powerful tools to your Azure deployments in two simple steps. Step 1 Add a startup task to your web or worker role and deploy. If you can’t deploy and need it right now, no worries! Remote Desktop to the Azure instance and you can execute a Powershell script to download / install Stackify.   Step 2 Log in to your account at www.stackify.com and begin monitoring as much as you want, as often as you want and see the results instantly. WMI? It’s there Event Viewer? You’ve got it. File System Access? Yes, please! Would love to make sure my web.config is correct.   IIS / App Pool Info? Yep. You can even restart it. Running Services? All of them. Start and Stop them to your heart’s content. SQL Database access? You bet’cha. Alerts and Notification? Of course! You should know before your customers let you know. … and so much more.   Conclusion Microsoft has shown, consistently, that they love developers, developers, developers. What every developer needs to realize from this is that they’ve given you a canvas, which is exactly what Azure is. It’s great infrastructure that is readily available, easy to manage, and fairly cost effective. However, the tooling is your responsibility. What you get, at best, is bare bones. App and server diagnostics should be available when you need them. While we, as developers, try to plan for and think of everything ahead of time, there will come times where we need to get data that just isn’t available. And having to go through a lot of cumbersome steps to get that data, and then have to find a friendlier way to consume it…. well, that just doesn’t make a lot of sense to me. I’d rather spend my time writing and developing features and completing bug fixes for my applications, than to be writing code to monitor and diagnose.

    Read the article

  • SQL Sentry First Impressions

    - by AjarnMark
    After struggling to defend my SQL Servers from a political attack recently, I realized that I needed better tools to back me up, and SQL Sentry is the leading candidate. A couple of weeks ago, seemingly from out of nowhere, complaints from the business users started coming in that one of the core internal applications was running dramatically slower than normal, and fingers were being pointed at the SQL Server.  Unfortunately, we don’t have a production DBA whose entire job is to monitor and maintain our SQL Servers.  The responsibility falls to me to do the best I can, investing only a small portion of my time, because there are so many other responsibilities to take care of, and our industry is still deep in recession.  I inherited these SQL Servers and have made significant improvements in process and procedure, but I had not yet made the time to take real baseline measurements or keep a really close eye on the performance.  Like many DBAs, I wrote several of my own tools and used the “built-in tools” like Profiler, PerfMon, and sp_who2 (did I mention most of our instances are SQL Server 2000?).  These have all served me well for in-the-moment troubleshooting and maintenance, but they really fell down on the job when I was called upon to “prove” that SQL Server performance was acceptable and more importantly had not degraded recently (i.e. historical comparisons).  I really didn’t have anything from a historical comparison perspective, but I was able to show that current performance was acceptable, and deflect attention back onto other components (which in fact turned out to be the real culprit). That experience dramatically illustrated the need for better monitoring tools.  Coincidentally, I had been talking recently to my boss about the mini nightmare of monitoring several critical and interdependent overnight jobs that operate on separate instances of SQL Server.  Among other tools, I had been using Idera’s SQL Job Manager which is a free tool and did a nice job of showing me job schedules and histories in a nice calendar view.  This worked fairly well, and for the money (did I mention it was free?) it couldn’t be beat.  But it is based on the stored job history in MSDB, and there were other performance problems that we ran into when we started changing the settings for how much job history to retain, in order to be able to look back a month or more in the calendar view.  Another coincidence (if you believe in such things) was that when we had some of those performance challenges, I posted a couple of questions to the #sqlhelp hashtag on Twitter and Greg Gonzalez (@SQLSensei) suggested I check out SQL Sentry’s Event Manager.  At the time, I just thought he worked there, but later found out that he founded the company.  When I took a quick look at the features & benefits, the one that really jumped out at me is Chaining and Queueing which sounded like it would really help with our “interdependent jobs on different servers” issue. I know that is a lot of background story and coincidences, but hopefully you have stuck with me so far, and now we have arrived at the point where last week I downloaded and installed the 30-day trial of the SQL Sentry Power Suite, which is Event Manager plus Performance Advisor.  And I must say that I really like what I see so far.  Here are a few highlights: Great Support.  I had two issues getting the trial setup and monitoring a handful of our servers.  One of which was entirely my fault (missed a security setting in SQL 2008) and the other was mostly my fault (late change to some config settings that were apparently cached and did not get refreshed properly).  In both cases, the support staff at SQL Sentry were very responsive and rather quickly figured out what the cause and fix was for each of them.  This left me with a great impression of the company.  Kudos to them! Chaining and Queueing.  While I have not yet activated this feature, I am very excited about the possibilities.  We have jobs on three different instances of SQL Server that have to be run in a certain order, and each has to finish before the next can successfully begin, and I believe this feature will ensure just that.  It has been a real pain in the backside when one of those jobs runs just a little too long and does not finish before the job on another instance starts, thus triggering a chain reaction of either outright job failures, or worse, successful completion of completely invalid processing. Calendar View.  I really, really like the Event Manager calendar view where I can see all jobs and events across all instances and identify potential resource contention as well as windows of opportunity for maintenance activity.  Very well done, and based on Event Manager’s own database of accumulated historical information rather than querying the source instances every time. Performance Advisor Dashboard History View.  This view let’s me quickly select a date and time range and it displays graphs of key SQL Server and Windows metrics.  This is exactly the thing I needed to answer the “has performance changed recently” question at the beginning of this post. Reporting Services Subscription Jobs with Report Name.  This was a big and VERY pleasant surprise.  If you have ever looked at the list of SQL Server jobs that SQL Server Reporting Services creates when you make a Subscription, you will notice that they all have some sort of GUID as the name of the job.  This is really ugly, and really annoying because when you are just looking at the SQL Agent and Job Activity Monitor, if you see that Job X failed, you really do not have any indication in the name or the properties of the Job itself, as to what Report that was for.  But with SQL Sentry Event Manager you do.  The Jobs list in the Navigator pane in SQL Sentry, amazingly, displays the name of the Report that the Subscription Job is for.  And when you open it to see more details, it shows you the full Reporting Services path to that Report, so you can immediately track it down in the Report Manager in case you want to identify/notify the owner or edit the Subscription information.  I did not expect this at all, but I sure do like it.  HOORAY! That is just my first impressions from using the tools for a few days.  And I haven’t even gotten into how it showed me where I was completely mistaken about one aspect of my SQL Server disk configurations.  I’ll share that lesson in another blog entry.  But I have to say it again, the combination of Event Manager and Performance Advisor working together have really made me a fan.

    Read the article

  • 5 Best Practices - Laying the Foundation for WebCenter Projects

    - by Kellsey Ruppel
    Today’s guest post comes from Oracle WebCenter expert John Brunswick. John specializes in enterprise portal and content management solutions and actively contributes to the enterprise software business community and has authored a series of articles about optimal business involvement in portal, business process management and SOA development, examining ways of helping organizations move away from monolithic application development. We’re happy to have John join us today! Maximizing success with Oracle WebCenter portal requires a strategic understanding of Oracle WebCenter capabilities.  The following best practices enable the creation of portal solutions with minimal resource overhead, while offering the greatest flexibility for progressive elaboration. They are inherently project agnostic, enabling a strong foundation for future growth and an expedient return on your investment in the platform.  If you are able to embrace even only a few of these practices, you will materially improve your deployment capability with WebCenter. 1. Segment Duties Around 3Cs - Content, Collaboration and Contextual Data "Agility" is one of the most common business benefits touted by modern web platforms.  It sounds good - who doesn't want to be Agile, right?  How exactly IT organizations go about supplying agility to their business counterparts often lacks definition - hamstrung by ambiguity. Ultimately, businesses want to benefit from reduced development time to deliver a solution to a particular constituent, which is augmented by as much self-service as possible to develop and manage the solution directly. All done in the absence of direct IT involvement. With Oracle WebCenter's depth in the areas of content management, pallet of native collaborative services, enterprise mashup capability and delegated administration, it is very possible to execute on this business vision at a technical level. To realize the benefits of the platform depth we can think of Oracle WebCenter's segmentation of duties along the lines of the 3 Cs - Content, Collaboration and Contextual Data.  All three of which can have their foundations developed by IT, then provisioned to the business on a per role basis. Content – Oracle WebCenter benefits from an extremely mature content repository.  Work flow, audit, notification, office integration and conversion capabilities for documents (HTML & PDF) make this a haven for business users to take control of content within external and internal portals, custom applications and web sites.  When deploying WebCenter portal take time to think of areas in which IT can provide the "harness" for content to reside, then allow the business to manage any content items within the site, using the content foundation to ensure compliance with business rules and process.  This frees IT to work on more mission critical challenges and allows the business to respond in short order to emerging market needs. Collaboration – Native collaborative services and WebCenter spaces are a perfect match for business users who are looking to enable document sharing, discussions and social networking.  The ability to deploy the services is granular and on the basis of roles scoped to given areas of the system - much like the first C “content”.  This enables business analysts to design the roles required and IT to provision with peace of mind that users leveraging the collaborative services are only able to do so in explicitly designated areas of a site. Bottom line - business will not need to wait for IT, but cannot go outside of the scope that has been defined based on their roles. Contextual Data – Collaborative capabilities are most powerful when included within the context of business data.  The ability to supply business users with decision shaping data that they can include in various parts of a portal or portals, just as they would with content items, is one of the most powerful aspects of Oracle WebCenter.  Imagine a discussion about new store selection for a retail chain that re-purposes existing information from business intelligence services about various potential locations and or custom backend systems - presenting it directly in the context of the discussion.  If there are some data sources that are preexisting in your enterprise take a look at how they can be made into discrete offerings within the portal, then scoped to given business user roles for inclusion within collaborative activities. 2. Think Generically, Execute Specifically Constructs.  Anyone who has spent much time around me knows that I am obsessed with this word.  Why? Because Constructs offer immense power - more than APIs, Web Services or other technical capability. Constructs offer organizations the ability to leverage a platform's native characteristics to offer substantial business functionality - without writing code.  This concept becomes more powerful with the additional understanding of the concepts from the platform that an organization learns over time.  Let's take a look at an example of where an Oracle WebCenter construct can substantially reduce the time to get a subscription-based site out the door and into the hands of the end consumer. Imagine a site that allows members to subscribe to specific disciplines to access information and application data around that various discipline.  A space is a collection of secured pages within Oracle WebCenter.  Spaces are not only secured, but also default content stored within it to be scoped automatically to that space. Taking this a step further, Oracle WebCenter’s Activity Stream surfaces events, discussions and other activities that are scoped to the given user on the basis of their space affiliations.  In order to have a portal that would allow users to "subscribe" to information around various disciplines - spaces could be used out of the box to achieve this capability and without using any APIs or low level technical work to achieve this. 3. Make Governance Work for You Imagine driving down the street without the painted lines on the road.  The rules of the road are so ingrained in our minds, we often do not think about the process, but seemingly mundane lane markers are critical enablers. Lane markers allow us to travel at speeds that would be impossible if not for the agreed upon direction of flow. Additionally and more importantly, it allows people to act autonomously - going where they please at any given time. The return on the investment for mobility is high enough for people to buy into globally agreed up governance processes. In Oracle WebCenter we can use similar enablers to lane markers.  Our goal should be to enable the flow of information and provide end users with the ability to arrive at business solutions as needed, not on the basis of cumbersome processes that cannot meet the business needs in a timely fashion. How do we do this? Just as with "Segmentation of Duties" Oracle WebCenter technologies offer the opportunity to compartmentalize various business initiatives from each other within the system due to constructs and security that are available to use within the platform. For instance, when a WebCenter space is created, any content added within that space by default will be secured to that particular space and inherits meta data that is associated with a folder created for the space. Oracle WebCenter content uses meta data to support a broad range of rich ECM functionality and can automatically impart retention, workflow and other policies automatically on the basis of what has been defaulted for that space. Depending on your business needs, this paradigm will also extend to sub sections of a space, offering some interesting possibilities to enable automated management around content. An example may be press releases within a particular area of an extranet that require a five year retention period and need to the reviewed by marketing and legal before release.  The underlying content system will transparently take care of this process on the basis of the above rules, enabling peace of mind over unstructured data - which could otherwise become overwhelming. 4. Make Your First Project Your Second Imagine if Michael Phelps was competing in a swimming championship, but told right before his race that he had to use a brand new stroke.  There is no doubt that Michael is an outstanding swimmer, but chances are that he would like to have some time to get acquainted with the new stroke. New technologies should not be treated any differently.  Before jumping into the deep end it helps to take time to get to know the new approach - even though you may have been swimming thousands of times before. To quickly get a handle on Oracle WebCenter capabilities it can be helpful to deploy a sandbox for the team to use to share project documents, discussions and announcements in an effort to help the actual deployment get under way, while increasing everyone’s knowledge of the platform and its functionality that may be helpful down the road. Oracle Technology Network has made a pre-configured virtual machine available for download that can be a great starting point for this exercise. 5. Get to Know the Community If you are reading this blog post you have most certainly faced a software decision or challenge that was solved on the basis of a small piece of missing critical information - which took substantial research to discover.  Chances were also good that somewhere, someone had already come across this information and would have been excited to share it. There is no denying the power of passionate, connected users, sharing key tips around technology.  The Oracle WebCenter brand has a rich heritage that includes industry-leading technology and practitioners.  With the new Oracle WebCenter brand, opportunities to connect with these experts has become easier. Oracle WebCenter Blog Oracle Social Enterprise LinkedIn WebCenter Group Oracle WebCenter Twitter Oracle WebCenter Facebook Oracle User Groups Additionally, there are various Oracle WebCenter related blogs by an excellent grouping of services partners.

    Read the article

  • BRE (Business Rules Engine) Data Services is out...!!!

    - by Vishal
    A few months ago we at Tellago had open sourced the BizTalk Data Services. We were meanwhile working on other artifacts which comes along with BizTalk Server like the “Business Rules Engine”.  We are happy to announce the first version of BRE Data Services. BRE Data Services is a same concept which we covered through BTS Data Services, providing a RESTFul OData – based API to interact with the Business Rules Engine via HTTP using ATOM Publishing Protocol or JSON as the encoding mechanism.   In the first version release, we mainly focused on the browsing, querying and searching BRE artifacts via a RESTFul interface. Also along with that we provide the functionality to execute Business Rules by inserting the Facts for policies via the IUpdatable implementation of WCF Data Services.   The BRE Data Services API provides a lightweight interface for managing Business Rules Engine artifacts such as Policies, Rules, Vocabularies, Conditions, Actions, Facts etc. The following are some examples which details some of the available features in the current version of the API.   Basic Querying: Querying BRE Policies http://localhost/BREDataServices/BREMananagementService.svc/Policies Querying BRE Rules http://localhost/BREDataServices/BREMananagementService.svc/Rules Querying BRE Vocabularies http://localhost/BREDataServices/BREMananagementService.svc/Vocabularies   Navigation: The BRE Data Services API also leverages WCF Data Services to enable navigation across related different BRE objects. Querying a specific Policy http://localhost/BREDataServices/BREMananagementService.svc/Policies(‘PolicyName’) Querying a specific Rule http://localhost/BREDataServices/BREMananagementService.svc/Rules(‘RuleName’) Querying all Rules under a Policy http://localhost/BREDataServices/BREMananagementService.svc/Policies('PolicyName')/Rules Querying all Facts under a Policy http://localhost/BREDataServices/BREMananagementService.svc/Policies('PolicyName')/Facts Querying all Actions for a specific Rule http://localhost/BREDataServices/BREMananagementService.svc/Rules('RuleName')/Actions Querying all Conditions for a specific Rule http://localhost/BREDataServices/BREMananagementService.svc/Rules('RuleName')/Actions Querying a specific Vocabulary: http://localhost/BREDataServices/BREMananagementService.svc/Vocabularies('VocabName')   Implementation: With the BRE Data Services, we also provide the functionality of executing a particular policy via HTTP. There are couple of ways you can do that though the API.   Ø First is though Service Operations feature of WCF Data Services in which you can execute the Facts by passing them in the URL itself. This is a very simple implementations of the executing the policies due to the limitations & restrictions (only primitive types of input parameters which can be passed) currently of the Service Operations of the WCF Data Services. Below is a code sample.                Below is a traced Request/Response message.                                 Ø Second is through the IUpdatable Interface of WCF Data Services. In this method, you can first query the rule which you want to execute and then inserts Facts for that particular Rules and finally when you perform the SaveChanges() call for the IUpdatable Interface API, it executes the policy with the facts which you inserted at runtime. Below is a sample of client side code. Due to the limitations of current version of WCF Data Services where there is no way you can return back the updates happening on the service side back to the client via the SaveChanges() method. Here we are executing the rule passing a serialized XML as Facts and there is no changes made to any data where we can query back to fetch the changes. This is overcome though the first way to executing the policies which is by executing it as a Service Operation call.     This actually generates a AtomPub message shown as below:   POST /Tellago.BRE.REST.ServiceHost/BREMananagementService.svc/$batch HTTP/1.1 User-Agent: Microsoft ADO.NET Data Services DataServiceVersion: 1.0;NetFx MaxDataServiceVersion: 2.0;NetFx Accept: application/atom+xml,application/xml Accept-Charset: UTF-8 Content-Type: multipart/mixed; boundary=batch_6b9a5ced-5ecb-4585-940a-9d5e704c28c7 Host: localhost:8080 Content-Length: 1481 Expect: 100-continue   --batch_6b9a5ced-5ecb-4585-940a-9d5e704c28c7 Content-Type: multipart/mixed; boundary=changeset_184a8c59-a714-4ba9-bb3d-889a88fe24bf   --changeset_184a8c59-a714-4ba9-bb3d-889a88fe24bf Content-Type: application/http Content-Transfer-Encoding: binary   MERGE http://localhost:8080/Tellago.BRE.REST.ServiceHost/BREMananagementService.svc/Facts('TestPolicy') HTTP/1.1 Content-ID: 4 Content-Type: application/atom+xml;type=entry Content-Length: 927   <?xml version="1.0" encoding="utf-8" standalone="yes"?> <entry xmlns:d="http://schemas.microsoft.com/ado/2007/08/dataservices" xmlns:m="http://schemas.microsoft.com/ado/2007/08/dataservices/metadata" font-size: x-small"http://www.w3.org/2005/Atom">   <category scheme="http://schemas.microsoft.com/ado/2007/08/dataservices/scheme" term="Tellago.BRE.REST.Resources.Fact" />   <title />   <author>     <name />   </author>   <updated>2011-01-31T20:09:15.0023982Z</updated>   <id>http://localhost:8080/Tellago.BRE.REST.ServiceHost/BREMananagementService.svc/Facts('TestPolicy')</id>   <content type="application/xml">     <m:properties>       <d:FactInstance>&lt;ns0:LoanStatus xmlns:ns0="http://tellago.com"&gt;&lt;Age&gt;10&lt;/Age&gt;&lt;Status&gt;true&lt;/Status&gt;&lt;/ns0:LoanStatus&gt;</d:FactInstance>       <d:FactType>TestSchema</d:FactType>       <d:ID>TestPolicy</d:ID>     </m:properties>   </content> </entry> --changeset_184a8c59-a714-4ba9-bb3d-889a88fe24bf-- --batch_6b9a5ced-5ecb-4585-940a-9d5e704c28c7—     Installation: The installation of the BRE Data Services is pretty straight forward. ·         Create a new IIS website say BREDataServices. ·         Download the SourceCode from TellagoCodeplex and copy the content from Tellago.BRE.REST.ServiceHost to the physical location of the above created website.     ·         The appPool account running the website should have admin access to the BizTalkRuleEngineDb database. ·         TheRight click the BREManagementService.svc in the IIS ContentView for the website and wala..     Conclusion: The BRE Data Services API is an experiment intended to bring the capabilities of RESTful/OData based services to the Traditional BTS/BRE Solutions. The future releases will target on technologies like BAM, ESB Toolkit. This version has been tested with various version of BizTalk Server and we have uploaded the source code to our Tellago's DevLabs workspace at Codeplex. I hope you guys enjoy this release. Keep an eye on our new releases @ Tellago Codeplex. We are working on various other Biztalk Artifacts like BAM, ESB Toolkit.     Till than happy BizzRuling…!!!     Thanks,   Vishal Mody

    Read the article

  • Building an Infrastructure Cloud with Oracle VM for x86 + Enterprise Manager 12c

    - by Richard Rotter
    Cloud Computing? Everyone is talking about Cloud these days. Everyone is explaining how the cloud will help you to bring your service up and running very fast, secure and with little effort. You can find these kinds of presentations at almost every event around the globe. But what is really behind all this stuff? Is it really so simple? And the answer is: Yes it is! With the Oracle SW Stack it is! In this post, I will try to bring this down to earth, demonstrating how easy it could be to build a cloud infrastructure with Oracle's solution for cloud computing.But let me cover some basics first: How fast can you build a cloud?How elastic is your cloud so you can provide new services on demand? How much effort does it take to monitor and operate your Cloud Infrastructure in order to meet your SLAs?How easy is it to chargeback for your services provided? These are the critical success factors of Cloud Computing. And Oracle has an answer to all those questions. By using Oracle VM for X86 in combination with Enterprise Manager 12c you can build and control your cloud environment very fast and easy. What are the fundamental building blocks for your cloud? Oracle Cloud Building Blocks #1 Hardware Surprise, surprise. Even the cloud needs to run somewhere, hence you will need hardware. This HW normally consists of servers, storage and networking. But Oracles goes beyond that. There are Optimized Solutions available for your cloud infrastructure. This is a cookbook to build your HW cloud platform. For example, building your cloud infrastructure with blades and our network infrastructure will reduce complexity in your datacenter (Blades with switch network modules, splitter cables to reduce the amount of cables, TOR (Top Of the Rack) switches which are building the interface to your infrastructure environment. Reducing complexity even in the cabling will help you to manage your environment more efficient and with less risk. Of course, our engineered systems fit into the cloud perfectly too. Although they are considered as a PaaS themselves, having the database SW (for Exadata) and the application development environment (for Exalogic) already deployed on them, in general they are ideal systems to enable you building your own cloud and PaaS infrastructure. #2 Virtualization The next missing link in the cloud setup is virtualization. For me personally, it's one of the most hidden "secret", that oracle can provide you with a complete virtualization stack in terms of a hypervisor on both architectures: X86 and Sparc CPUs. There is Oracle VM for X86 and Oracle VM for Sparc available at no additional  license costs if your are running this virtualization stack on top of Oracle HW (and with Oracle Premier Support for HW). This completes the virtualization portfolio together with Solaris Zones introduced already with Solaris 10 a few years ago. Let me explain how Oracle VM for X86 works: Oracle VM for x86 consists of two main parts: - The Oracle VM Server: Oracle VM Server is installed on bare metal and it is the hypervisor which is able to run virtual machines. It has a very small footprint. The ISO-Image of Oracle VM Server is only 200MB large. It is very small but efficient. You can install a OVM-Server in less than 5 mins by booting the Server with the ISO-Image assigned and providing the necessary configuration parameters (like installing an Linux distribution). After the installation, the OVM-Server is ready to use. That's all. - The Oracle VM-Manager: OVM-Manager is the central management tool where you can control your OVM-Servers. OVM-Manager provides the graphical user interface, which is an Application Development Framework (ADF) application, with a familiar web-browser based interface, to manage Oracle VM Servers, virtual machines, and resources. The Oracle VM Manager has the following capabilities: Create virtual machines Create server pools Power on and off virtual machines Manage networks and storage Import virtual machines, ISO files, and templates Manage high availability of Oracle VM Servers, server pools, and virtual machines Perform live migration of virtual machines I want to highlight one of the goodies which you can use if you are running Oracle VM for X86: Preconfigured, downloadable Virtual Machine Templates form edelivery With these templates, you can download completely preconfigured Virtual Machines in your environment, boot them up, configure them at first time boot and use it. There are templates for almost all Oracle SW and Applications (like Fusion Middleware, Database, Siebel, etc.) available. #3) Cloud Management The management of your cloud infrastructure is key. This is a day-to-day job. Acquiring HW, installing a virtualization layer on top of it is done just at the beginning and if you want to expand your infrastructure. But managing your cloud, keeping it up and running, deploying new services, changing your chargeback model, etc, these are the daily jobs. These jobs must be simple, secure and easy to manage. The Enterprise Manager 12c Cloud provides this functionality from one management cockpit. Enterprise Manager 12c uses Oracle VM Manager to control OVM Serverpools. Once you registered your OVM-Managers in Enterprise Manager, then you are able to setup your cloud infrastructure and manage everything from Enterprise Manager. What you need to do in EM12c is: ">Register your OVM Manager in Enterprise ManagerAfter Registering your OVM Manager, all the functionality of Oracle VM for X86 is also available in Enterprise Manager. Enterprise Manager works as a "Manger" of the Manager. You can register as many OVM-Managers you want and control your complete virtualization environment Create Roles and Users for your Self Service Portal in Enterprise ManagerWith this step you allow users to logon on the Enterprise Manager Self Service Portal. Users can request Virtual Machines in this portal. Setup the Cloud InfrastructureSetup the Quotas for your self service users. How many VMs can they request? How much of your resources ( cpu, memory, storage, network, etc. etc.)? Which SW components (templates, assemblys) can your self service users request? In this step, you basically set up the complete cloud infrastructure. Setup ChargebackOnce your cloud is set up, you need to configure your chargeback mechanism. The Enterprise Manager collects the resources metrics, which are used in a very deep level. Almost all collected Metrics could be used in the chargeback module. You can define chargeback plans based on configurations (charge for the amount of cpu, memory, storage is assigned to a machine, or for a specific OS which is installed) or chargeback on resource consumption (% of cpu used, storage used, etc). Or you can also define a combination of configuration and consumption chargeback plans. The chargeback module is very flexible. Here is a overview of the workflow how to handle infrastructure cloud in EM: Summary As you can see, setting up an Infrastructure Cloud Service with Oracle VM for X86 and Enterprise Manager 12c is really simple. I personally configured a complete cloud environment with three X86 servers and a small JBOD san box in less than 3 hours. There is no magic in it, it is all straightforward. Of course, you have to have some experience with Oracle VM and Enterprise Manager. Experience in setting up Linux environments helps as well. I plan to publish a technical cookbook in the next few weeks. I hope you found this post useful and will see you again here on our blog. Any hints, comments are welcome!

    Read the article

  • The Future of Project Management is Social

    - by Natalia Rachelson
    Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} A guest post by Kazim Isfahani, Director, Product Marketing, Oracle Rapid Ascent. Breakneck Speed. Lightning Fast. Perhaps even overwhelming. No matter which set of adjectives we use to describe it, social media’s rise into the enterprise mainstream has been unprecedented. Indeed, the big 4 social media powerhouses (Facebook, Google+, LinkedIn, and Twitter), have nearly 2 Billion users between them. You may be asking (as you should really) “That’s all well and good for the consumer, but for me at my company, what’s your point? Beyond the fact that I can check and post updates, that is.” Good question, kind sir. Impact of Social and Collaboration on Project Management I’ll dovetail this discussion to the project management realm, since that’s what I’m writing about. Speed is a big challenge for project-driven organizations. Anything that can help speed up project delivery - be it a new product introduction effort or a geographical expansion project - fast is a good thing. So where does this whole social thing fit particularly since there are already a host of tools to help with traditional project execution? The fact is companies have seen improvements in their productivity by deploying departmental collaboration and other social-oriented solutions. McKinsey’s survey on social tools shows we have reached critical scale: 72% of respondents report that their companies use at least one and over 40% say they are using social networks and blogs. We don’t hear as much about the impact of social media technologies at the project and project manager level, but that does not mean there is none. Consider the new hire. The type of individual entering the workforce and executing on projects is a generation of worker expecting visually appealing, easy to use and easy to understand technology meshing hand-in-hand with business processes. Consider the project manager. The social era has enhanced the role that the project manager must play. Today’s project manager must be a supreme communicator, an influencer, a sympathizer, a negotiator, and still manage to keep all stakeholders in the loop on project progress. Social tools play a significant role in this effort. Now consider the impact to the project team. The way that a project team functions has changed, with newer, social oriented technologies making the process of information dissemination and team communications much more fluid. It’s clear that a shift is occurring where “social” is intersecting with project management. The Rise of Social Project Management We refer to the melding of project management and social networking as Social Project Management. Social Project Management is based upon the philosophy that the project team is one part of an integrated whole, and that valuable and unique abilities exist within the larger organization. For this reason, Social Project Management systems should be integrated into the collaborative platform(s) of an organization, allowing communication to proceed outside the project boundaries. What makes social project management "social" is an implicit awareness where distributed teams build connected links in ways that were previously restricted to teams that were co-located. Just as critical, Social Project Management embraces the vision of seamless online collaboration within a project team, but also provides for, (and enhances) the use of rigorous project management techniques. Social Project Management acknowledges that projects (particularly large projects) are a social activity - people doing work with people, for other people, with commitments to yet other people. The more people (larger projects), the more interpersonal the interactions, and the more social affects the project. The Epitome of Social - Fusion Project Portfolio Management If I take this one level further to discuss Fusion Project Portfolio Management, the notion of Social Project Management is on full display. With Fusion Project Portfolio Management, project team members have a single place for interaction on projects and access to any other resources working within the Fusion ERP applications. This allows team members the opportunity to be informed with greater participation and provide better information. The application’s the visual appeal, and highly graphical nature makes it easy to navigate information. The project activity stream adds to the intuitive user experience. The goal of productivity is pervasive throughout Fusion Project Portfolio Management. Field research conducted with Oracle customers and partners showed that users needed a way to stay in the context of their core transactions and yet easily access social networking tools. This is manifested in the application so when a user executes a business process, they not only have the transactional application at their fingertips, but also have things like e-mail, SMS, text, instant messaging, chat – all providing a number of different ways to interact with people and/or groups of people, both internal and external to the project and enterprise. But in the end, connecting people is relatively easy. The larger issue is finding a way to serve up relevant, system-generated, actionable information, in real time, which will allow for more streamlined execution on key business processes. Fusion Project Portfolio Management’s design concept enables users to create project communities, establish discussion threads, manage event calendars as well as deliver project based work spaces to organize communications within the context of a project – all within a secure business environment. We’d love to hear from you and get your thoughts and ideas about how Social Project Management is impacting your organization. To learn more about Oracle Fusion Project Portfolio Management, please visit this link

    Read the article

  • Control-Break Style ADF Table - Comparing Values with Previous Row

    - by Steven Davelaar
    Sometimes you need to display data in an ADF Faces table in a control-break layout style, where rows should be "indented" when the break column has the same value as in the previous row. In the screen shot below, you see how the table breaks on both the RegionId column as well as the CountryId column. To implement this I didn't use fancy SQL statements. The table is based on a straightforward Locations ViewObject that is based on the Locations entity object and the Countries reference entity object, and the join query was automatically created by adding the reference EO. To get the indentation in the ADF Faces table, we simple use two rendered properties on the RegionId and CountryId outputText items:  <af:column sortProperty="RegionId" sortable="false"            headerText="#{bindings.LocationsView1.hints.RegionId.label}"            id="c5">   <af:outputText value="#{row.RegionId}" id="ot2"                  rendered="#{!CompareWithPreviousRowBean['RegionId']}">     <af:convertNumber groupingUsed="false"                       pattern="#{bindings.LocationsView1.hints.RegionId.format}"/>   </af:outputText> </af:column> <af:column sortProperty="CountryId" sortable="false"            headerText="#{bindings.LocationsView1.hints.CountryId.label}"            id="c1">   <af:outputText value="#{row.CountryId}" id="ot5"                  rendered="#{!CompareWithPreviousRowBean['CountryId']}"/> </af:column> The CompareWithPreviousRowBean managed bean is defined in request scope and is a generic bean that can be used for all the tables in your application that needs this layout style. As you can see the bean is a Map-style bean where we pass in the name of the attribute that should be compared with the previous row. The get method in the bean that is called returns boolean false when the attribute has the same value in the same row. Here is the code of the get method:  public Object get(Object key) {   String attrName = (String) key;   boolean isSame = false;   // get the currently processed row, using row expression #{row}   JUCtrlHierNodeBinding row = (JUCtrlHierNodeBinding) resolveExpression(getRowExpression());   JUCtrlHierBinding tableBinding = row.getHierBinding();   int rowRangeIndex = row.getViewObject().getRangeIndexOf(row.getRow());   Object currentAttrValue = row.getRow().getAttribute(attrName);   if (rowRangeIndex > 0)   {     Object previousAttrValue = tableBinding.getAttributeFromRow(rowRangeIndex - 1, attrName);     isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue);   }   else if (tableBinding.getRangeStart() > 0)   {     // previous row is in previous range, we create separate rowset iterator,     // so we can change the range start without messing up the table rendering which uses     // the default rowset iterator     int absoluteIndexPreviousRow = tableBinding.getRangeStart() - 1;     RowSetIterator rsi = null;     try     {       rsi = tableBinding.getViewObject().getRowSet().createRowSetIterator(null);       rsi.setRangeStart(absoluteIndexPreviousRow);       Row previousRow = rsi.getRowAtRangeIndex(0);       Object previousAttrValue = previousRow.getAttribute(attrName);       isSame = currentAttrValue != null && currentAttrValue.equals(previousAttrValue);     }     finally     {       rsi.closeRowSetIterator();     }   }   return isSame; } The row expression defaults to #{row} but this can be changed through the rowExpression  managed property of the bean.  You can download the sample application here.

    Read the article

  • CodePlex Daily Summary for Sunday, August 03, 2014

    CodePlex Daily Summary for Sunday, August 03, 2014Popular ReleasesBoxStarter: Boxstarter 2.4.76: Running the Setup.bat file will install Chocolatey if not present and then install the Boxstarter modules.GMare: GMare Beta 1.2: Features Added: - Instance painting by holding the alt key down while pressing the left mouse button - Functionality to the binary exporter so that backgrounds from image files can be used - On the binary exporter background information can be edited manually now - Update to the GMare binary read GML script - Game Maker Studio export - Import from GMare project. Multiple options to import desired properties of a .gmpx - 10 undo/redo levels instead of 5 is now the default - New preferences dia...Json.NET: Json.NET 6.0 Release 4: New feature - Added Merge to LINQ to JSON New feature - Added JValue.CreateNull and JValue.CreateUndefined New feature - Added Windows Phone 8.1 support to .NET 4.0 portable assembly New feature - Added OverrideCreator to JsonObjectContract New feature - Added support for overriding the creation of interfaces and abstract types New feature - Added support for reading UUID BSON binary values as a Guid New feature - Added MetadataPropertyHandling.Ignore New feature - Improv...SQL Server Dialog: SQL Server Dialog: Input server, user and password Show folder and file in treeview Customize icon Filter file extension Skip system generate folder and fileAitso-a platform for spatial optimization and based on artificial immune systems: Aitso_0.14.08.01: Aitso0.14.08.01Installer.zipVidCoder: 1.5.24 Beta: Added NL-Means denoiser. Updated HandBrake core to SVN 6254. Added extra error handling to DVD player code to avoid a crash when the player was moved.AutoUpdater.NET : Auto update library for VB.NET and C# Developer: AutoUpdater.NET 1.3: Fixed problem in DownloadUpdateDialog where download continues even if you close the dialog. Added support for new url field for 64 bit application setup. AutoUpdater.NET will decide which download url to use by looking at the value of IntPtr.Size. Added German translation provided by Rene Kannegiesser. Now developer can handle update logic herself using event suggested by ricorx7. Added italian translation provided by Gianluca Mariani. Fixed bug that prevents Application from exiti...SEToolbox: SEToolbox 01.041.012 Release 1: Added voxel material textures to read in with mods. Fixed missing texture replacements for mods. Fixed rounding issue in raytrace code. Fixed repair issue with corrupt checkpoint file. Fixed issue with updated SE binaries 01.041.012 using new container configuration.Magick.NET: Magick.NET 6.8.9.601: Magick.NET linked with ImageMagick 6.8.9.6 Breaking changes: - Changed arguments for the Map method of MagickImage. - QuantizeSettings uses Riemersma by default.Multiple Threads TCP Server: Project: this Project is based on VS 2013, .net freamwork 4.0, you can open it by vs 2010 or laterAricie Shared: Aricie.Shared Version 1.8.00: Version 1.8.0 - Release Notes New: Expression Builder to design Flee Expressions New: Cryptographic helpers and configuration classes Improvement: Many fixes and improvements with property editor Improvement: Token Replace Property explorer now has a restricted mode for additional security Improvement: Better variables, types and object manipulation Fixed: smart file and flee bugs Fixed: Removed Exception while trying to read unsuported files Improvement: several performance twe...Accesorios de sitios Torrent en Español para Synology Download Station: Pack de Torrents en Español 6.0.0: Agregado los módulos de DivXTotal, el módulo de búsqueda depende del de alojamiento para bajar las series Utiliza el rss: http://www.divxtotal.com/rss.php DbEntry.Net (Leafing Framework): DbEntry.Net 4.2: DbEntry.Net is a lightweight Object Relational Mapping (ORM) database access compnent for .Net 4.0+. It has clearly and easily programing interface for ORM and sql directly, and supoorted Access, Sql Server, MySql, SQLite, Firebird, PostgreSQL and Oracle. It also provide a Ruby On Rails style MVC framework. Asp.Net DataSource and a simple IoC. DbEntry.Net.v4.2.Setup.zip include the setup package. DbEntry.Net.v4.2.Src.zip include source files and unit tests. DbEntry.Net.v4.2.Samples.zip ...Azure Storage Explorer: Azure Storage Explorer 6 Preview 1: Welcome to Azure Storage Explorer 6 Preview 1 This is the first release of the latest Azure Storage Explorer, code-named Phoenix. What's New?Here are some important things to know about version 6: Open Source Now being run as a full open source project. Full source code on CodePlex. Collaboration encouraged! Updated Code Base Brand-new code base (WPF/C#/.NET 4.5) Visual Studio 2013 solution (previously VS2010) Uses the Task Parallel Library (TPL) for asynchronous background operat...Wsus Package Publisher: release v1.3.1407.29: Updated WPP to recognize the very latest console version. Some files was missing into the latest release of WPP which lead to crash when trying to make a custom update. Add a workaround to avoid clipboard modification when double-clicking on a label when creating a custom update. Add the ability to publish detectoids. (This feature is still in a BETA phase. Packages relying on these detectoids to determine which computers need to be updated, may apply to all computers).VG-Ripper & PG-Ripper: PG-Ripper 1.4.32: changes NEW: Added Support for 'ImgMega.com' links NEW: Added Support for 'ImgCandy.net' links NEW: Added Support for 'ImgPit.com' links NEW: Added Support for 'Img.yt' links FIXED: 'Radikal.ru' links FIXED: 'ImageTeam.org' links FIXED: 'ImgSee.com' links FIXED: 'Img.yt' linksAsp.Net MVC-4,Entity Framework and JQGrid Demo with Todo List WebApplication: Asp.Net MVC-4,Entity Framework and JQGrid Demo: Asp.Net MVC-4,Entity Framework and JQGrid Demo with simple Todo List WebApplication, Overview TodoList is a simple web application to create, store and modify Todo tasks to be maintained by the users, which comprises of following fields to the user (Task Name, Task Description, Severity, Target Date, Task Status). TodoList web application is created using MVC - 4 architecture, code-first Entity Framework (ORM) and Jqgrid for displaying the data.Waterfox: Waterfox 31.0 Portable: New features in Waterfox 31.0: Added support for Unicode 7.0 Experimental support for WebCL New features in Firefox 31.0:New Add the search field to the new tab page Support of Prefer:Safe http header for parental control mozilla::pkix as default certificate verifier Block malware from downloaded files Block malware from downloaded files audio/video .ogg and .pdf files handled by Firefox if no application specified Changed Removal of the CAPS infrastructure for specifying site-sp...SuperSocket, an extensible socket server framework: SuperSocket 1.6.3: The changes below are included in this release: fixed an exception when collect a server's status but it has been stopped fixed a bug that can cause an exception in case of sending data when the connection dropped already fixed the log4net missing issue for a QuickStart project fixed a warning in a QuickStart projectYnote Classic: Ynote Classic 2.8.5 Beta: Several Changes - Multiple Carets and Multiple Selections - Improved Startup Time - Improved Syntax Highlighting - Search Improvements - Shell Command - Improved StabilityNew ProjectsCreek: Creek is a Collection of many C# Frameworks and my ownSpeaking Speedometer (android): Simple speaking speedometerT125Protocol { Alpha version }: implement T125 Protocol for communicate with a mainframe.Unix Time: This library provides a System.UnixTime as a new Type providing conversion between Unix Time and .NET DateTime.

    Read the article

  • Unlocking Productivity

    - by Michael Snow
    Unlocking Productivity in Life Sciences with Consolidated Content Management by Joe Golemba, Vice President, Product Management, Oracle WebCenter As life sciences organizations look to become more operationally efficient, the ability to effectively leverage information is a competitive advantage. Whether data mining at the drug discovery phase or prepping the sales team before a product launch, content management can play a key role in developing, organizing, and disseminating vital information. The goal of content management is relatively straightforward: put the information that people need where they can find it. A number of issues can complicate this; information sits in many different systems, each of those systems has its own security, and the information in those systems exists in many different formats. Identifying and extracting pertinent information from mountains of farflung data is no simple job, but the alternative—wasted effort or even regulatory compliance issues—is worse. An integrated information architecture can enable health sciences organizations to make better decisions, accelerate clinical operations, and be more competitive. Unstructured data matters Often when we think of drug development data, we think of structured data that fits neatly into one or more research databases. But structured data is often directly supported by unstructured data such as experimental protocols, reaction conditions, lot numbers, run times, analyses, and research notes. As life sciences companies seek integrated views of data, they are typically finding diverse islands of data that seemingly have no relationship to other data in the organization. Information like sales reports or call center reports can be locked into siloed systems, and unavailable to the discovery process. Additionally, in the increasingly networked clinical environment, Web pages, instant messages, videos, scientific imaging, sales and marketing data, collaborative workspaces, and predictive modeling data are likely to be present within an organization, and each source potentially possesses information that can help to better inform specific efforts. Historically, content management solutions that had 21CFR Part 11 capabilities—electronic records and signatures—were focused mainly on content-enabling manufacturing-related processes. Today, life sciences companies have many standalone repositories, requiring different skills, service level agreements, and vendor support costs to manage them. With the amount of content doubling every three to six months, companies have recognized the need to manage unstructured content from the beginning, in order to increase employee productivity and operational efficiency. Using scalable and secure enterprise content management (ECM) solutions, organizations can better manage their unstructured content. These solutions can also be integrated with enterprise resource planning (ERP) systems or research systems, making content available immediately, in the context of the application and within the flow of the employee’s typical business activity. Administrative safeguards—such as content de-duplication—can also be applied within ECM systems, so documents are never recreated, eliminating redundant efforts, ensuring one source of truth, and maintaining content standards in the organization. Putting it in context Consolidating structured and unstructured information in a single system can greatly simplify access to relevant information when it is needed through contextual search. Using contextual filters, results can include therapeutic area, position in the value chain, semantic commonalities, technology-specific factors, specific researchers involved, or potential business impact. The use of taxonomies is essential to organizing information and enabling contextual searches. Taxonomy solutions are composed of a hierarchical tree that defines the relationship between different life science terms. When overlaid with additional indexing related to research and/or business processes, it becomes possible to effectively narrow down the amount of data that is returned during searches, as well as prioritize results based on specific criteria and/or prior search history. Thus, search results are more accurate and relevant to an employee’s day-to-day work. For example, a search for the word "tissue" by a lab researcher would return significantly different results than a search for the same word performed by someone in procurement. Of course, diverse data repositories, combined with the immense amounts of data present in an organization, necessitate that the data elements be regularly indexed and cached beforehand to enable reasonable search response times. In its simplest form, indexing of a single, consolidated data warehouse can be expected to be a relatively straightforward effort. However, organizations require the ability to index multiple data repositories, enabling a single search to reference multiple data sources and provide an integrated results listing. Security and compliance Beyond yielding efficiencies and supporting new insight, an enterprise search environment can support important security considerations as well as compliance initiatives. For example, the systems enable organizations to retain the relevance and the security of the indexed systems, so users can only see the results to which they are granted access. This is especially important as life sciences companies are working in an increasingly networked environment and need to provide secure, role-based access to information across multiple partners. Although not officially required by the 21 CFR Part 11 regulation, the U.S. Food and Drug Administraiton has begun to extend the type of content considered when performing relevant audits and discoveries. Having an ECM infrastructure that provides centralized management of all content enterprise-wide—with the ability to consistently apply records and retention policies along with the appropriate controls, validations, audit trails, and electronic signatures—is becoming increasingly critical for life sciences companies. Making the move Creating an enterprise-wide ECM environment requires moving large amounts of content into a single enterprise repository, a daunting and risk-laden initiative. The first key is to focus on data taxonomy, allowing content to be mapped across systems. The second is to take advantage new tools which can dramatically speed and reduce the cost of the data migration process through automation. Additional content need not be frozen while it is migrated, enabling productivity throughout the process. The ability to effectively leverage information into success has been gaining importance in the life sciences industry for years. The rapid adoption of enterprise content management, both in operational processes as well as in scientific management, are clear indicators that the companies are looking to use all available data to be better informed, improve decision making, minimize risk, and increase time to market, to maintain profitability and be more competitive. As more and more varieties and sources of information are brought under the strategic management umbrella, the ability to divine knowledge from the vast pool of information is increasingly difficult. Simple search engines and basic content management are increasingly unable to effectively extract the right information from the mountains of data available. By bringing these tools into context and integrating them with business processes and applications, we can effectively focus on the right decisions that make our organizations more profitable. More Information Oracle will be exhibiting at DIA 2012 in Philadelphia on June 25-27. Stop by our booth Normal 0 false false false EN-US X-NONE X-NONE MicrosoftInternetExplorer4 /* Style Definitions */ table.MsoNormalTable {mso-style-name:"Table Normal"; mso-tstyle-rowband-size:0; mso-tstyle-colband-size:0; mso-style-noshow:yes; mso-style-priority:99; mso-style-qformat:yes; mso-style-parent:""; mso-padding-alt:0in 5.4pt 0in 5.4pt; mso-para-margin:0in; mso-para-margin-bottom:.0001pt; mso-pagination:widow-orphan; font-size:11.0pt; font-family:"Calibri","sans-serif"; mso-ascii-font-family:Calibri; mso-ascii-theme-font:minor-latin; mso-fareast-font-family:"Times New Roman"; mso-fareast-theme-font:minor-fareast; mso-hansi-font-family:Calibri; mso-hansi-theme-font:minor-latin; mso-bidi-font-family:"Times New Roman"; mso-bidi-theme-font:minor-bidi;} (#2825) to learn more about the advantages of a centralized ECM strategy and see the Oracle WebCenter Content solution, our 21 CFR Part 11 compliant content management platform.

    Read the article

< Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >