Search Results

Search found 20360 results on 815 pages for 'capture output'.

Page 436/815 | < Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >

• hp pavilion g6 1250 with a BCM 4313 doesn't see any wireless networks

  - by Ahmed Kotb

  i have tried using ubuntu 10.04 and ubuntu 11.10 and both have the same problem the driver is detected by the additional propriety drivers wizard and after installation, ubuntu can't see except on wireless network which is not mine (and i can't connect to it as it is secured) There are plenty of wireless networks around me but ubuntu can't detect them and if i tried to connect to one of them as if it was hidden connection time out. the command lspci -nvn | grep -i net gives 04:00.0 Network controller [0280]: Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller [14e4:4727] (rev 01) 05:00.0 Ethernet controller [0200]: Realtek Semiconductor Co., Ltd. RTL8101E/RTL8102E PCI Express Fast Ethernet controller [10ec:8136] (rev 05) iwconfig gives lo no wireless extensions. eth0 no wireless extensions. wlan0 IEEE 802.11bgn ESSID:off/any Mode:Managed Access Point: Not-Associated Tx-Power=19 dBm Retry long limit:7 RTS thr:off Fragment thr:off Power Management:off i guess it is something related to Broadcom driver .. but i don't know , any help will be appreciated UPDATE: ok i installed a new copy of 11.10 to remove the effect of any trials i have made i followed the link (http://askubuntu.com/q/67806) as suggested all what i have done now is trying the command lsmod | grep brc and it gave me the following brcmsmac 631693 0 brcmutil 17837 1 brcmsmac mac80211 310872 1 brcmsmac cfg80211 199587 2 brcmsmac,mac80211 crc_ccitt 12667 1 brcmsmac then i blacklisted all the other drivers as mentioned in the link the wireless is still disabled.. in the last installation installing the Brodcom STA driver form the additional drivers enabled the menu but as i have said before it wasn't able to connect or even get a list of available networks so what should i do now ? the output of command rfkill list all rfkill list all 0: phy0: Wireless LAN Soft blocked: no Hard blocked: no

  Read the article

• Mac OS ? Assembly Language Esoteria

  - by veryfoolish

  I've been playing around with assembly and object files in general on Mac OS ? and was wondering if somebody could provide some edification. Specifically, I'm wondering what the extra code GCC generates when compiling the C file in the following example does. I have a toy C program so I can comprehend the assembly output. int main() { int a = 5; int b = 5; int c = a + b; } Running this through gcc -S creates the following assembly: .text .globl _main _main: LFB2: pushq %rbp LCFI0: movq %rsp, %rbp LCFI1: movl $5, -4(%rbp) movl $5, -8(%rbp) movl -8(%rbp), %eax addl -4(%rbp), %eax movl %eax, -12(%rbp) leave ret LFE2: .section __TEXT,__eh_frame,coalesced,no_toc+strip_static_syms+live_support EH_frame1: .set L$set$0,LECIE1-LSCIE1 .long L$set$0 LSCIE1: .long 0x0 .byte 0x1 .ascii "zR\0" .byte 0x1 .byte 0x78 .byte 0x10 .byte 0x1 .byte 0x10 .byte 0xc .byte 0x7 .byte 0x8 .byte 0x90 .byte 0x1 .align 3 LECIE1: .globl _main.eh _main.eh: LSFDE1: .set L$set$1,LEFDE1-LASFDE1 .long L$set$1 LASFDE1: .long LASFDE1-EH_frame1 .quad LFB2-. .set L$set$2,LFE2-LFB2 .quad L$set$2 .byte 0x0 .byte 0x4 .set L$set$3,LCFI0-LFB2 .long L$set$3 .byte 0xe .byte 0x10 .byte 0x86 .byte 0x2 .byte 0x4 .set L$set$4,LCFI1-LCFI0 .long L$set$4 .byte 0xd .byte 0x6 .align 3 LEFDE1: .subsections_via_symbols The LCFI1 section seems to contain the actual logic for the program, but I'm not sure what the misc. other stuff is for... also, is there any scheme these labels are following? I'm sorry this is such a vague question. I'd appreciate anything, including being pointed to a resource where I can find out more about this. Thanks!

  Read the article

• Computer starts, POSTs normal, no video

  - by Annath

  So, I recently tried to start up an old computer of mine. It would not power on, so I replaced the PSU. When I powered it on, all the fans spun up and the POST beeps indicated a normal startup. The problem was there was no video output. Every couple of minutes, I hear the post code again. I think it is restarting after POST, but without video I have no idea why. Does anyone have an idea as to why this is happening, and how to fix it? EDIT: The video card is a PCI-e card. There is no integrated graphics on the motherboard. If I remove the video card, the POST indicates a missing card. When I put it back, it goes back to normal, so I know that it recognizes that the card exists.

  Read the article

• How to use qcow2 disk image in Linux?

  - by sauparna

  I have a large qcow2 formatted disk image, which I use as storage. Often I need to move data to and from this disk image. I mount the disk using the qemu-nbd tool as follows: modprobe nbd max_part=63 qemu-nbd -c /dev/nbd0 /host/disk100G.img mount /dev/nbd0p1 /home/rup/disk But disk access fails every now and then in the midst of some I/O operation with an "Input/output error". At that point I have to manually unmount the disk and re-mount it so that I can run the program again: qemu-nbd -d /dev/nbd0 umount joborkhaki/ What could be the reason for this? Is there a better tool that I can use to maintain a qcow2 disk image?

  Read the article

• VoteCounts: bookmarklet to display up/down votes even for rep<1k

  - by SztupY

  Screenshot / Code Snippet About This small bookmarklet will allow anyone to use the "vulnerability" of the API that it allows you to check the up/down vote count - a feat you could normally achieve by being a 1k+rep user. Mainly useful for sites where you don't have this amount of rep, but want to check the stats of the more controversial questions (usually on meta) No API key is actually used here, but it's trivial to add one. License I don't think a code like this deserves anything other than WTFPL Download It's the following line (javascript - 375 bytes): javascript:(function(){a='jsonp';c=' .vote-count-post';d='up_vote_count';e='down_vote_count';$.ajax({url:document.location.href.replace(/(http:\/\/)(.*)(\/questions\/.*)\/.*/,'$1api.$2/1.0$3'),dataType:a,jsonp:a,success:function(x){b=x.questions[0];$('#question'+c).html(b[d]+"-"+b[e]);$.each(b.answers,function(z,y){$('#answer-'+y.answer_id+c).html(y[d]+"-"+y[e])})}})})() EDIT: This is longer, but it will make the result look like exactly on SO. Took a while to make it exactly 508 chars, so it works with IE too. javascript:(function(){w=function(t,q){l='_vote_count';h='up'+l;j='down'+l;k='</div>';s='<div style="color:';$(t).html(s+'green">'+(q[h]?'+':'')+q[h]+k+'<div class="vote-count-separator">'+k+s+'maroon">'+(q[j]==0?'':'-')+q[j]+k)};a='jsonp';c=' .vote-count-post';$.ajax({url:document.location.href.replace(/(http:\/\/)(.*)(\/questions\/.*)\/.*/,'$1api.$2/1.0$3'),dataType:a,jsonp:a,success:function(x){b=x.questions[0];w('#question'+c,b);$.each(b.answers,function(z,y){w('#answer-'+y.answer_id+c,y)})}})})() Platform For any jquery/bookmarklets compatible browser. Tested with Chrome, FF3.6 and IE8 for SU,SO,MSO Contact sztupy.hu Code It was written in notepad already in minified form. Used firebug to debug. Code is above. Contribute(=decrease code size or make the output nicer) any way you want. I'd be great if you'd do the second code shorter than 508 bytes. Known bugs If a question has more than 30 answers then some of the answers won't be resolved. This can be solved easily for <=100 answers, but for questions with more than 100 answers this is more difficult EDIT: updated to API version 1.0. Answers doesn't work yet.

  Read the article

• How to get headphones and speakers working at the same time?

  - by Borek

  I have a Gigabyte P55-UD3 motherboard which comes with a Realtek sound card and audio header for the front panel. My headset is permanently connected to the front panel (mic in, headphones in) and I also have speakers connected at the rear of the computer. What I want to achieve is that both the headphones and the speakers work at the same time. On my old PC with Realtek, I was able to do this by clicking "Device advanced settings" in the Realtek HD Audio Manager and then clicking "Make front and rear output devices playback two different audio streams simultaneously" and then doing some reassigning of front/rear settings in the Realtek Audio Manager (can't remember the details). But that doesn't seem to be working now - either the speakers play sounds or the headphones, not both at the same time. To pose the question differently, Windows plays the sounds on the "default device". I'd like to make both headphones and the speakers kind of like the default devices.

  Read the article

• Accessing Server-Side Data from Client Script: Accessing JSON Data From an ASP.NET Page Using jQuery

  When building a web application, we must decide how and when the browser will communicate with the web server. The ASP.NET WebForms model greatly simplifies web development by providing a straightforward mechanism for exchanging data between the browser and the server. With WebForms, each ASP.NET page's rendered output includes a <form> element that performs a postback to the same page whenever a Button control within the form is clicked, or whenever the user modifies a control whose AutoPostBack property is set to True. On postback, the server sends the entire contents of the web page back to the browser, which then displays this new content. With WebForms we don't need to spend much time or effort thinking about how or when the browser will communicate with the server or how that returned information will be processed by the browser. It just works. While this approach certainly works and has its advantages, it's not without its drawbacks. The primary concern with postback forms is that they require a large amount of information to be exchanged between the browser and the server. Specifically, the browser sends back all of its form fields (including hidden ones, like view state, which may be quite large) and then the server sends back the entire contents of the web page. Granted, there are scenarios where this large quantity of data needs to be exchanged, but in many cases we can use techniques that exchange much less information. However, these techniques necessitate spending more time and effort thinking about how and when to have the browser communicate with the server and intelligently deciding on what information needs to be exchanged. This article, the first in a multi-part series, examines different techniques for accessing server-side data from a browser using client-side script. Throughout this series we will explore alternative ways to expose data on the server so that it can be accessed from the browser using script; we will also examine various tools for communicating with the server from JavaScript, including jQuery and the ASP.NET AJAX library. Read on to learn more! Read More >

  Read the article

• The remote host closed the connection. The error code is 0x80070057

  - by Jalpesh P. Vadgama

  While creating a PDF or any file with asp.net pages I was getting following error. Exception Type:System.Web.HttpException The remote host closed the connection. The error code is 0x80072746. at System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.FlushCore(Byte[] status, Byte[] header, Int32 keepConnected, Int32 totalBodySize, Int32 numBodyFragments, IntPtr[] bodyFragments, Int32[] bodyFragmentLengths, Int32 doneWithSession, Int32 finalStatus, Boolean& async) at System.Web.Hosting.ISAPIWorkerRequest.FlushCachedResponse(Boolean isFinal) at System.Web.Hosting.ISAPIWorkerRequest.FlushResponse(Boolean finalFlush) at System.Web.HttpResponse.Flush(Boolean finalFlush) at System.Web.HttpResponse.Flush() at System.Web.UI.HttpResponseWrapper.System.Web.UI.IHttpResponse.Flush() at System.Web.UI.PageRequestManager.RenderFormCallback(HtmlTextWriter writer, Control containerControl) at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) at System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) at System.Web.UI.HtmlControls.HtmlForm.RenderChildren(HtmlTextWriter writer) at System.Web.UI.HtmlControls.HtmlForm.Render(HtmlTextWriter output) at System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.HtmlControls.HtmlForm.RenderControl(HtmlTextWriter writer) at System.Web.UI.HtmlFormWrapper.System.Web.UI.IHtmlForm.RenderControl(HtmlTextWriter writer) at System.Web.UI.PageRequestManager.RenderPageCallback(HtmlTextWriter writer, Control pageControl) at System.Web.UI.Control.RenderChildrenInternal(HtmlTextWriter writer, ICollection children) at System.Web.UI.Control.RenderChildren(HtmlTextWriter writer) at System.Web.UI.Page.Render(HtmlTextWriter writer) at System.Web.UI.Control.RenderControlInternal(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.Control.RenderControl(HtmlTextWriter writer, ControlAdapter adapter) at System.Web.UI.Control.RenderControl(HtmlTextWriter writer) at System.Web.UI.Page.ProcessRequestMain(Boolean includeStagesBeforeAsyncPoint, Boolean includeStagesAfterAsyncPoint) Exception Type:System.Web.HttpException The remote host closed the connection. The error code is 0x80072746. at System.Web.Hosting.ISAPIWorkerRequestInProcForIIS6.FlushCore(Byte[] status, After searching and analyzing I have found that client was disconnected and still I am flushing the response which I am doing for creating PDF files from the stream. To fix this kind of error we can use Response.IsClientConnected property to check whether client is connected or not and then we can flush and end response from client. Here is the sample code to fix that problem. if (Response.IsClientConnected) { Response.Flush(); Response.End(); } That’s it Hope this will help you..Stay tuned for more.. Till that Happy Programming!! Technorati Tags: Exception,ASp.NET

  Read the article

• Can you disable UNC paths in Windows?

  - by Evan

  We are trying to lock down a Terminal Server, and want to remove a commercial package's ability to accept UNC file paths, ie. paths in the app can then only be entered using the windows drive letters. Is there any way to do this in Windows? Can we disallow UNC paths for just the app? Can we disallow UNC paths for the entire Terminal Server session? The intention is to allow the application to only write to certain directories (as mapped in the Terminal Server session). The aim is to prevent the output of files to directories that the users have access to, but are not mapped in the Terminal Server session.

  Read the article

• Nexenta/OpenSolaris filer kernel panic/crash

  - by ewwhite

  I've an x4540 Sun storage server running NexentaStor Enterprise. It's serving NFS over 10GbE CX4 for several VMWare vSphere hosts. There are 30 virtual machines running. For the past few weeks, I've had random crashes spaced 10-14 days apart. This system used to open OpenSolaris and was stable in that arrangement. The crashes trigger the automated system recovery feature on the hardware, forcing a hard system reset. Here's the output from mdb debugger: panic[cpu5]/thread=ffffff003fefbc60: Deadlock: cycle in blocking chain ffffff003fefb570 genunix:turnstile_block+795 () ffffff003fefb5d0 unix:mutex_vector_enter+261 () ffffff003fefb630 zfs:dbuf_find+5d () ffffff003fefb6c0 zfs:dbuf_hold_impl+59 () ffffff003fefb700 zfs:dbuf_hold+2e () ffffff003fefb780 zfs:dmu_buf_hold+8e () ffffff003fefb820 zfs:zap_lockdir+6d () ffffff003fefb8b0 zfs:zap_update+5b () ffffff003fefb930 zfs:zap_increment+9b () ffffff003fefb9b0 zfs:zap_increment_int+68 () ffffff003fefba10 zfs:do_userquota_update+8a () ffffff003fefba70 zfs:dmu_objset_do_userquota_updates+de () ffffff003fefbaf0 zfs:dsl_pool_sync+112 () ffffff003fefbba0 zfs:spa_sync+37b () ffffff003fefbc40 zfs:txg_sync_thread+247 () ffffff003fefbc50 unix:thread_start+8 () Any ideas what this means?

  Read the article

• Are there any font rendering libraries for games development that support hinting?

  - by Richard Fabian

  I've used angel code's bitmap font generator quite a bit and though it's very good, I wondered if there would be a way of using the hinting information to provide a better readable result by using hinting to provide differing thickness based on size/pixel coverage. I imagine any solution would have to use the distance field tech presented in the valve paper on smoothing fonts while maintaining or reducing asset size. (http://www.gamedev.net/community/forums/topic.asp?topic_id=494612) but I haven't found any demos of it being used with hinting information turned on or included in the field gradients in any way. Another way of looking at this is whether there are any font bitmap generators that will output mipmaps that still maintain their readability in the face of pixel size. I think the lower mip levels would try to guarantee fill and space where it is necessary to maintain readability/topology over maintaining style/form (the point of hinting). In response to "Is there a reason you can't just render the size you want", the problem lies in the fact that font rasterisers currently don't render in 3D, and hinting information would be important in different amounts due to the pixel density being different along different axes, even differing in importance along the length of a string due to the size reducing over distance. For example, I only want horizontal hinting in a texture that is viewed from the side, and only really want vertical hinting in a font that is viewed from below or above. This isn't meant to be a renderer that tries to render a perfect outline as accurately as possible, as hinting distorts the reality of the font, instead this is meant to be a rendering solution for quite static scenes, but scenes that have 3D transformed and warped text layout. In this case the legibility is important, more important than the accuracy of representation of the polygon shape.

  Read the article

• WinXP How to Tunnel LPT over USB

  - by Michael Pruitt

  I have a windows program that accesses a device connected to a LPT (1-3) 25 pin port. The communication is bidirectional, and I suspected the control lines are also accessed directly. I would like to migrate the device to a machine that does not have a LPT port. I saw the dos2usb software, but that takes the output (from a DOS program) and 'prints' it formatted for a specific printer. I need a raw LPT connection, and a cable that provides access to all the control signals. I do have a USB to 36-pin Centronics that may have the extra signals. I use it with a vinyl cutter that doesn't like most of the USB dongles. It comes up as USB001. Would adding and sharing a generic printer, then mapping LPT1 to the share get me closer? Would that work for a parallel port scanner? My preferred solution is a USB cable with a driver that will map it to LPT1, LPT2, or LPT3.

  Read the article

• Linux Mint something wrong with my .bashrc

  - by user2309862

  The path of my .basrc file is /home/vamsi/.bashrc It is weird that my file has nothing but the path I set. I think I am using a file at the wrong location or that I have lost my .bashrc file as none of the environment variables set here seem to work. #ANDROID_DEV ANDROID_HOME=/opt/android-sdk-linux export ANDROID_HOME PATH= $PATH:$ANDROID_SDK_HOME/tools export PATH PATH=$PATH:$ANDROID_HOME/platform-tools export PATH PATH=$PATH:$ANDROID_HOME/build-tools export PATH #MAVEN-PATH M2_HOME=/opt/apache-maven-3.1.0 export M2_HOME M2=$PATH:$M2_HOME/bin export M2 I was prompted to install maven2 in order to use mvn, but the android command cannot be found. Could you please help me find a solution to this issue. EDIT: Meanwhile,I tried this: export PATH=${PATH}:/opt/android-sdk-linux/platform-tools export PATH=${PATH}:/opt/android-sdk-linux/tools Now,the output of $PATH echoes: bash: /usr/local/sbin:/usr/local/bin:/usr/sbin:/usr/bin:/sbin:/bin:/usr/games:/usr/local/games:/opt/android-sdk-linux/platform-tools:/opt/android-sdk-linux/build-tools: No such file or directory

  Read the article

• SSH broken after hostname change on EC2-hosted Ubuntu

  - by dimadima

  I changed my instance's hostname using the hostname utility and then set it in /etc/hostname so that the new name survives reboot. My main motivation was for differentiating between instances at the prompt using the \h format in PS1. EDIT I also changed permissions on my home directory. I made my home directory group writeable. END EDIT Now I can no longer SSH into the machine. The short of it is the error Permission denied (publickey). Running ssh -v, the more verbose output is: debug1: Authentications that can continue: publickey debug1: Next authentication method: publickey debug1: Offering RSA public key: /Users/dmitry/.ssh/id_rsa debug1: Authentications that can continue: publickey debug1: Trying private key: /Users/dmitry/.ssh/ec2key.pem debug1: read PEM private key done: type RSA debug1: Authentications that can continue: publickey debug1: No more authentication methods to try. Permission denied (publickey). Should I have done something after changing the hostname? Now I can't get into the instance! :(

  Read the article

• Connection problem between redmine and svn

  - by WombaT

  I have server controlled by Debian 6.0. I installed and configured redmine some time ago, and now configured svn server. Now i'm trying to configure redmine to be able to view svn repository. URL is: https://192.168.11.78/svn/bee Connection is not working, log show this error: Error parsing svn output: #<REXML::ParseException: No close tag for /lists/list> Google says that its common error, and its possible to fix it by permamently accept of server certificate so i did it and nothing. Still dont work. Later, i added [global] store-plaintext-passwords = no in file .subversion/servers I did this (and cert accept) for both root and www-data users. Nothing helped, still got error in redmine The entry or revision was not found in the repository. What else i can do with it?

  Read the article

• Shutdown in background - PHP

  - by William

  I'm trying to shutdown an Ubuntu machine from PHP and am running into an issue if I want to delay the shutdown. The PHP line I'm using is: exec("sudo shutdown -h +5 &", $output); Where 5 is however many minutes in the future I want to shutdown. My problem is that this won't background and Apache hangs until either the machine is shutdown or someone else cancels the shutdown. shell_exec() has the same result. Is there another way to do this that will return immediately?

  Read the article

• July, the 31 Days of SQL Server DMO’s – Day 20 (sys.dm_tran_locks)

  - by Tamarick Hill

  The sys.dm_tran_locks DMV is used to return active lock resources on your server. Locking is a mechanism used by SQL Server to protect the integrity of data when you have multiple users that may potentially access the same data at the same time. Let’s run a query against this DMV so we can analyze the results. SELECT * FROM sys.dm_tran_locks As we can see, its a lot of lock information returned from this DMV. I will not go into detail about each of the columns returned, but I will touch on the ones that I feel are the most important. The first column in the output is the resource_type column which tells you the type of lock a particular row represents. It could be a PAGE lock, RID, OBJECT, DATABASE, or several other lock types. The resource_database_id represents the id of the database for a particular lock resource. The resource_lock_partition column represents the ID of a lock partition. When you have a table that is partitioned, locks can be escalated to the partition level before going to a table level lock. The request_mode column gives us information about the type of lock that is being requested. From the screenshots above we see RangeS-S locks which represent a share range lock and IS locks which represent Intent Shared locks. The request_status column displays whether the lock has been granted or whether the lock is waiting to be acquired. The request_session_id  shows the session_id that is requesting the lock. This DMV is the best place to go when you need to identify the exact locks that are being held or pending for individual requests. You might need this information when you are troubleshooting severe blocking or deadlocking problems on your server. For more information on this DMV, please see the below Books Online link: http://msdn.microsoft.com/en-us/library/ms190345.aspx Follow me on Twitter @PrimeTimeDBA

  Read the article

• OpenVPN on ec2 bridged mode connects but no Ping, DNS or forwarding

  - by michael

  I am trying to use OpenVPN to access the internet over a secure connection. I have openVPN configured and running on Amazon EC2 in bridge mode with client certs. I can successfully connect from the client, but I cannot get access to the internet or ping anything from the client I checked the following and everything seems to shows a successful connection between the vpn client/server and UDP traffic on 1194 [server] sudo tcpdump -i eth0 udp port 1194 (shows UDP traffic after establishing connection) [server] sudo iptables -L Chain INPUT (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere ACCEPT all -- anywhere anywhere Chain FORWARD (policy ACCEPT) target prot opt source destination ACCEPT all -- anywhere anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] sudo iptables -L -t nat Chain PREROUTING (policy ACCEPT) target prot opt source destination Chain POSTROUTING (policy ACCEPT) target prot opt source destination MASQUERADE all -- ip-W-X-Y-0.us-west-1.compute.internal/24 anywhere Chain OUTPUT (policy ACCEPT) target prot opt source destination [server] openvpn.log Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 [localhost] Inactivity timeout (--ping-restart), restarting Wed Oct 19 03:11:26 2011 localhost/a.b.c.d:61905 SIGUSR1[soft,ping-restart] received, client-instance restarting Wed Oct 19 03:41:31 2011 MULTI: multi_create_instance called Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Re-using SSL/TLS context Wed Oct 19 03:41:31 2011 a.b.c.d:57889 LZO compression initialized Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Control Channel MTU parms [ L:1574 D:166 EF:66 EB:0 ET:0 EL:0 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Data Channel MTU parms [ L:1574 D:1450 EF:42 EB:135 ET:32 EL:0 AF:3/1 ] Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Local Options hash (VER=V4): '360696c5' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 Expected Remote Options hash (VER=V4): '13a273ba' Wed Oct 19 03:41:31 2011 a.b.c.d:57889 TLS: Initial packet from [AF_INET]a.b.c.d:57889, sid=dd886604 ab6ebb38 Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=1, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=EXAMPLE_CA/[email protected] Wed Oct 19 03:41:35 2011 a.b.c.d:57889 VERIFY OK: depth=0, /C=US/ST=CA/L=SanFrancisco/O=EXAMPLE/CN=localhost/[email protected] Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Encrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Cipher 'BF-CBC' initialized with 128 bit key Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Data Channel Decrypt: Using 160 bit message hash 'SHA1' for HMAC authentication Wed Oct 19 03:41:37 2011 a.b.c.d:57889 Control Channel: TLSv1, cipher TLSv1/SSLv3 DHE-RSA-AES256-SHA, 1024 bit RSA Wed Oct 19 03:41:37 2011 a.b.c.d:57889 [localhost] Peer Connection Initiated with [AF_INET]a.b.c.d:57889 Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 PUSH: Received control message: 'PUSH_REQUEST' Wed Oct 19 03:41:39 2011 localhost/a.b.c.d:57889 SENT CONTROL [localhost]: 'PUSH_REPLY,redirect-gateway def1 bypass-dhcp,route-gateway W.X.Y.Z,ping 10,ping-restart 120,ifconfig W.X.Y.Z 255.255.255.0' (status=1) Wed Oct 19 03:41:40 2011 localhost/a.b.c.d:57889 MULTI: Learn: (IPV6) -> localhost/a.b.c.d:57889 [client] tracert google.com Tracing route to google.com [74.125.71.104] over a maximum of 30 hops: 1 347 ms 349 ms 348 ms PC [w.X.Y.Z] 2 * * * Request timed out. I can also successfully ping the server IP address from the client, and ping google.com from an SSH shell on the server. What am I doing wrong? Here is my config (Note: W.X.Y.Z == amazon EC2 private ipaddress) bridge config on br0 ifconfig eth0 0.0.0.0 promisc up brctl addbr br0 brctl addif br0 eth0 ifconfig br0 W.X.Y.X netmask 255.255.255.0 broadcast W.X.Y.255 up route add default gw W.X.Y.1 br0 /etc/openvpn/server.conf (from https://help.ubuntu.com/10.04/serverguide/C/openvpn.html) local W.X.Y.Z dev tap0 up "/etc/openvpn/up.sh br0" down "/etc/openvpn/down.sh br0" ;server W.X.Y.0 255.255.255.0 server-bridge W.X.Y.Z 255.255.255.0 W.X.Y.105 W.X.Y.200 ;push "route W.X.Y.0 255.255.255.0" push "redirect-gateway def1 bypass-dhcp" push "dhcp-option DNS 208.67.222.222" push "dhcp-option DNS 208.67.220.220" tls-auth ta.key 0 # This file is secret user nobody group nogroup log-append openvpn.log iptables config sudo iptables -A INPUT -i tap0 -j ACCEPT sudo iptables -A INPUT -i br0 -j ACCEPT sudo iptables -A FORWARD -i br0 -j ACCEPT sudo iptables -t nat -A POSTROUTING -s W.X.Y.0/24 -o eth0 -j MASQUERADE echo 1 > /proc/sys/net/ipv4/ip_forward Routing Tables added route -n Kernel IP routing table Destination Gateway Genmask Flags Metric Ref Use Iface W.X.Y.0 0.0.0.0 255.255.255.0 U 0 0 0 br0 0.0.0.0 W.X.Y.1 0.0.0.0 UG 0 0 0 br0 C:>route print =========================================================================== Interface List 32...00 ff ac d6 f7 04 ......TAP-Win32 Adapter V9 15...00 14 d1 e9 57 49 ......Microsoft Virtual WiFi Miniport Adapter #2 14...00 14 d1 e9 57 49 ......Realtek RTL8191SU Wireless LAN 802.11n USB 2.0 Net work Adapter 10...00 1f d0 50 1b ca ......Realtek PCIe GBE Family Controller 1...........................Software Loopback Interface 1 11...00 00 00 00 00 00 00 e0 Teredo Tunneling Pseudo-Interface 16...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter 17...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #2 18...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #3 36...00 00 00 00 00 00 00 e0 Microsoft ISATAP Adapter #5 =========================================================================== IPv4 Route Table =========================================================================== Active Routes: Network Destination Netmask Gateway Interface Metric 0.0.0.0 0.0.0.0 10.1.2.1 10.1.2.201 25 10.1.2.0 255.255.255.0 On-link 10.1.2.201 281 10.1.2.201 255.255.255.255 On-link 10.1.2.201 281 10.1.2.255 255.255.255.255 On-link 10.1.2.201 281 127.0.0.0 255.0.0.0 On-link 127.0.0.1 306 127.0.0.1 255.255.255.255 On-link 127.0.0.1 306 127.255.255.255 255.255.255.255 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 127.0.0.1 306 224.0.0.0 240.0.0.0 On-link 10.1.2.201 281 255.255.255.255 255.255.255.255 On-link 127.0.0.1 306 255.255.255.255 255.255.255.255 On-link 10.1.2.201 281 =========================================================================== Persistent Routes: Network Address Netmask Gateway Address Metric 0.0.0.0 0.0.0.0 10.1.2.1 Default =========================================================================== C:>tracert google.com Tracing route to google.com [74.125.71.147] over a maximum of 30 hops: 1 344 ms 345 ms 343 ms PC [W.X.Y.221] 2 * * * Request timed out.

  Read the article

• Apache hanging with MaxClients is reached

  - by Ash White

  My Apache 2.2 (preform MPM) is hanging when MaxClients is reached, rather than queueing up requests and serving them when child processes become free. When this happens, the web server is totally unresponsive until it is manually restarted. The server stack is Ubuntu 8, MySQL 5, PHP 5. Hardware is Dual Xeons (2.8) with 2GB of RAM. It serves 30,000 - 50,000 pageviews per day. Static images, CSS, and JS are offloaded to a separate server and PHP is cached using eAccelerator. The HTML output of many pages is cached to the filesystem. Relevant Apache directives: KeepAlive On MaxKeepAliveRequests 50 KeepAliveTimeout 2 StartServers 2 MaxClients 150 MinSpareThreads 25 MaxSpareThreads 75 ThreadsPerChild 25 MaxRequestsPerChild 2000

  Read the article

• Can't bind spawn-fcgi to address

  - by Xeoncross

  Following some nice instructions I am almost through setting up PHP to run on nginx. However, every time I try to start spawn-fcgi I get an error message demo@desktop:/usr/bin$ sudo /etc/init.d/php-fastcgi start spawn-fcgi: bind failed: Cannot assign requested address My /etc/init.d/php-fastcgi startup script is: #!/bin/bash PHP_SCRIPT=/usr/bin/php-fastcgi FASTCGI_USER=demo RETVAL=0 case "$1" in start) su - $FASTCGI_USER -c $PHP_SCRIPT RETVAL=$? ;; stop) killall -9 php5-cgi RETVAL=$? ;; restart) killall -9 php5-cgi su - $FASTCGI_USER -c $PHP_SCRIPT RETVAL=$? ;; *) echo "Usage: php-fastcgi {start|stop|restart}" exit 1 ;; esac exit $RETVAL console output which loads /usr/bin/php-fastcgi #!/bin/sh /usr/bin/spawn-fcgi -a 127.0.0.1 -p 9000 -C 6 -u demo -f /usr/bin/php5-cgi One thing to note is that I am running the PHP cgi as the user "demo" which is my account.

  Read the article

• Throughput tool with decent graphing.

  - by Cory J

  I've been looking through some of the tools available for measuring network throughput, namely iperf, bwping, ttcp, etc. I am planning on doing throughput tests over a long period of time, so what I really need is good graphing output, preferably rrd graphs. The Jperf frontend for iperf will generate a graph, and bmon has a nice command-line graph, but these simply count seconds since the test was started. I am trying to measure trends in throughput over times of the day, so a graph with times and days is necessary. So a way to get iperf to log to RRDs would be best, if this isn't possible could someone point me toward another solution?

  Read the article

• Ext3 partition doesn't mount on Snow Leopard using MacFUSE

  - by Fez

  I'm dual-booting OS X and Ubuntu on a Macbook 4,1. I'm trying to mount my Linux partition in OS X. I installed MacFUSE 2.0.3,2 and fuse-ext2-0.0.7 on Snow Leopard 10.6.5. I created the directory /Volumes/Ubuntu and tried to mount the disk there using the command: fuse-ext2 /dev/disk0s4 /Volumes/Ubuntu/ This is the output I get: fuse-ext2: version:'0.0.7', fuse_version:'27' [main (../../fuse-ext2/fuse-ext2.c:324)] fuse-ext2: enter [do_probe (../../fuse-ext2/do_probe.c:30)] fuse-ext2: Error while trying to open /dev/disk0s4 (rc=13) [do_probe (../../fuse-ext2/do_probe.c:34)] fuse-ext2: Probe failed [main (../../fuse-ext2/fuse-ext2.c:340)] Any clue what's going wrong? Thanks!

  Read the article

• debian squeeze: where do the logs for sysv init scripts go? (why won't my init script work)

  - by sbeam

  my actual problem is trying to debug a init script to start Resque. It works fine run as root from the command line, but does nothing on boot. It has some proper insserv headers and I've run updaterc.d to create the symlinks, and checked that they exist. The script is +x. # find /etc/rc*.d -name \*resque\* /etc/rc0.d/K01resque /etc/rc1.d/K01resque /etc/rc2.d/S01resque /etc/rc3.d/S01resque /etc/rc4.d/S01resque /etc/rc5.d/S01resque /etc/rc6.d/K01resque # ls -l /etc/init.d/resque -rwxr-xr-x 1 root root 2093 Oct 24 03:02 /etc/init.d/resque the script can be viewed here if you like. It uses lsb functions to log messages, which essentially echo() to STDOUT I believe. So where does the output go during startup? It's not in /var/log/*log

  Read the article

• Middle Mouse Button does not work in XFCE / Arch Linux

  - by Alp

  I have the XFCE desktop manager installed on my Arch Linux system. With E17 (Enlightenment desktop manager) i had no problems with my mouse: all buttons worked correctly out of the box. But in XFCE my middle mouse button does not fire an event at all (no output with xev). Evdev seems to identify my mouse correctly (Razer Deathadder) because it echoes its name in the xorg logs. I have no idea what could cause this and how to debug the problem. I start both e17 and xfce with startx. Here is my ~/.xinitrc: exec startxfce4 --with-ck-launch #exec enlightenment-start

  Read the article

• Belkin Flip KVM keyboard skip problems

  - by Craig

  I have just bought a Belkin Flip 2 port KVM. Functionally it is almost there except I have a keyboard sticking problem. So if I type the word 'Hello' it will often (about 25% of the time) output 'Hellooooooooooooooooooooo'. If I plug the keyboard directly into the USB on the computer I don't have this problem, only when plugged into the KVM. I feel like it is a USB speed problem. Followup It appears I have the same problem with the mouse, it will jump from one side of the screen to the other as I move it. The mouse is annoying but half as much as the keyboard.

  Read the article

< Previous Page | 432 433 434 435 436 437 438 439 440 441 442 443  | Next Page >